aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/chips/fwh_lock.h
blob: 800b0e853e868479b66b5dd917c602c428e0b3d7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
#ifndef FWH_LOCK_H
#define FWH_LOCK_H


enum fwh_lock_state {
        FWH_UNLOCKED   = 0,
	FWH_DENY_WRITE = 1,
	FWH_IMMUTABLE  = 2,
	FWH_DENY_READ  = 4,
};

struct fwh_xxlock_thunk {
	enum fwh_lock_state val;
	flstate_t state;
};


#define FWH_XXLOCK_ONEBLOCK_LOCK   ((struct fwh_xxlock_thunk){ FWH_DENY_WRITE, FL_LOCKING})
#define FWH_XXLOCK_ONEBLOCK_UNLOCK ((struct fwh_xxlock_thunk){ FWH_UNLOCKED,   FL_UNLOCKING})

/*
 * This locking/unlock is specific to firmware hub parts.  Only one
 * is known that supports the Intel command set.    Firmware
 * hub parts cannot be interleaved as they are on the LPC bus
 * so this code has not been tested with interleaved chips,
 * and will likely fail in that context.
 */
static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip,
	unsigned long adr, int len, void *thunk)
{
	struct cfi_private *cfi = map->fldrv_priv;
	struct fwh_xxlock_thunk *xxlt = (struct fwh_xxlock_thunk *)thunk;
	int ret;

	/* Refuse the operation if the we cannot look behind the chip */
	if (chip->start < 0x400000) {
		pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n",
			__func__, chip->start );
		return -EIO;
	}
	/*
	 * lock block registers:
	 * - on 64k boundariesand
	 * - bit 1 set high
	 * - block lock registers are 4MiB lower - overflow subtract (danger)
	 *
	 * The address manipulation is first done on the logical address
	 * which is 0 at the start of the chip, and then the offset of
	 * the individual chip is addted to it.  Any other order a weird
	 * map offset could cause problems.
	 */
	adr = (adr & ~0xffffUL) | 0x2;
	adr += chip->start - 0x400000;

	/*
	 * This is easy because these are writes to registers and not writes
	 * to flash memory - that means that we don't have to check status
	 * and timeout.
	 */
	mutex_lock(&chip->mutex);
	ret = get_chip(map, chip, adr, FL_LOCKING);
	if (ret) {
		mutex_unlock(&chip->mutex);
		return ret;
	}

	chip->oldstate = chip->state;
	chip->state = xxlt->state;
	map_write(map, CMD(xxlt->val), adr);

	/* Done and happy. */
	chip->state = chip->oldstate;
	put_chip(map, chip, adr);
	mutex_unlock(&chip->mutex);
	return 0;
}


static int fwh_lock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
	int ret;

	ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len,
		(void *)&FWH_XXLOCK_ONEBLOCK_LOCK);

	return ret;
}


static int fwh_unlock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
	int ret;

	ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len,
		(void *)&FWH_XXLOCK_ONEBLOCK_UNLOCK);

	return ret;
}

static void fixup_use_fwh_lock(struct mtd_info *mtd)
{
	printk(KERN_NOTICE "using fwh lock/unlock method\n");
	/* Setup for the chips with the fwh lock method */
	mtd->_lock   = fwh_lock_varsize;
	mtd->_unlock = fwh_unlock_varsize;
}
#endif /* FWH_LOCK_H */