/*
* wm8350-regmap.c -- Wolfson Microelectronics WM8350 register map
*
* This file splits out the tables describing the defaults and access
* status of the WM8350 registers since they are rather large.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mfd/wm8350/core.h>
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
#undef WM8350_HAVE_CONFIG_MODE
#define WM8350_HAVE_CONFIG_MODE
const u16 wm8350_mode0_defaults[] = {
0x17FF, /* R0 - Reset/ID */
0x1000, /* R1 - ID */
0x0000, /* R2 */
0x1002, /* R3 - System Control 1 */
0x0004, /* R4 - System Control 2 */
0x0000, /* R5 - System Hibernate */
0x8A00, /* R6 - Interface Control */
0x0000, /* R7 */
0x8000, /* R8 - Power mgmt (1) */
0x0000, /* R9 - Power mgmt (2) */
0x0000, /* R10 - Power mgmt (3) */
0x2000, /* R11 - Power mgmt (4) */
0x0E00, /* R12 - Power mgmt (5) */
0x0000, /* R13 - Power mgmt (6) */
0x0000, /* R14 - Power mgmt (7) */
0x0000, /* R15 */
0x0000, /* R16 - RTC Seconds/Minutes */
0x0100, /* R17 - RTC Hours/Day */
0x0101, /* R18 - RTC Date/Month */
0x1400, /* R19 - RTC Year */
0x0000, /* R20 - Alarm Seconds/Minutes */
0x0000, /* R21 - Alarm Hours/Day */
0x0000, /* R22 - Alarm Date/Month */
0x0320, /* R23 - RTC Time Control */
0x0000, /* R24 - System Interrupts */
0x0000, /* R25 - Interrupt Status 1 */
0x0000, /* R26 - Interrupt Status 2 */
0x0000, /* R27 - Power Up Interrupt Status */
0x0000, /* R28 - Under Voltage Interrupt status */
0x0000, /* R29 - Over Current Interrupt status */
0x0000, /* R30 - GPIO Interrupt Status */
0x0000, /* R31 - Comparator Interrupt Status */
0x3FFF, /* R32 - System Interrupts Mask */
0x0000, /* R33 - Interrupt Status 1 Mask */
0x0000, /* R34 - Interrupt Status 2 Mask */
0x0000, /* R35 - Power Up Interrupt Status Mask */
0x0000, /* R36 - Under Voltage Interrupt status Mask */
0x0000, /* R37 - Over Current Interrupt status Mask */
0x0000, /* R38 - GPIO Interrupt Status Mask */
0x0000, /* R39 - Comparator Interrupt Status Mask */
0x0040, /* R40 - Clock Control 1 */
0x0000, /* R41 - Clock Control 2 */
0x3B00, /* R42 - FLL Control 1 */
0x7086, /* R43 - FLL Control 2 */
0xC226, /* R44 - FLL Control 3 */
0x0000, /* R45 - FLL Control 4 */
0x0000, /* R46 */
0x0000, /* R47 */
0x0000, /* R48 - DAC Control */
0x0000, /* R49 */
0x00C0, /* R50 - DAC Digital Volume L */
0x00C0, /* R51 - DAC Digital Volume R */
0x0000, /* R52 */
0x0040, /* R53 - DAC LR Rate */
0x0000, /* R54 - DAC Clock Control */
0x0000, /* R55 */
