1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
/*
* TX3927 setup routines
* Based on linux/arch/mips/txx9/jmr3927/setup.c
*
* Copyright 2001 MontaVista Software Inc.
* Copyright (C) 2000-2001 Toshiba Corporation
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/param.h>
#include <asm/mipsregs.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
#include <asm/txx9pio.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx3927.h>
void __init tx3927_wdt_init(void)
{
txx9_wdt_init(TX3927_TMR_REG(2));
}
void __init tx3927_setup(void)
{
int i;
unsigned int conf;
/* don't enable - see errata */
txx9_ccfg_toeon = 0;
if (strstr(prom_getcmdline(), "toeon") != NULL)
txx9_ccfg_toeon = 1;
txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
TX3927_REG_SIZE);
/* SDRAMC,ROMC are configured by PROM */
for (i = 0; i < 8; i++) {
if (!(tx3927_romcptr->cr[i] & 0x8))
continue; /* disabled */
txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
txx9_ce_res[i].end =
txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
request_resource(&iomem_resource, &txx9_ce_res[i]);
}
/* clocks */
txx9_gbus_clock = txx9_cpu_clock / 2;
/* change default value to udelay/mdelay take reasonable time */
loops_per_jiffy = txx9_cpu_clock / HZ / 2;
/* CCFG */
/* enable Timeout BusError */
if (txx9_ccfg_toeon)
tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
/* clear BusErrorOnWrite flag */
tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
if (read_c0_conf() & TX39_CONF_WBON)
/* Disable PCI snoop */
tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
else
/* Enable PCI SNOOP - with write through only */
tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
/* do reset on watchdog */
tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
tx3927_ccfgptr->crir,
tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
/* TMR */
for (i = 0; i < TX3927_NR_TMR; i++)
txx9_tmr_init(TX3927_TMR_REG(i));
/* DMA */
tx3927_dmaptr->mcr = 0;
for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
/* reset channel */
tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
tx3927_dmaptr->ch[i].ccr = 0;
}
/* enable DMA */
#ifdef __BIG_ENDIAN
tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
#else
tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
#endif
/* PIO */
__raw_writel(0, &tx3927_pioptr->maskcpu);
__raw_writel(0, &tx3927_pioptr->maskext);
txx9_gpio_init(TX3927_PIO_REG, 0, 16);
conf = read_c0_conf();
if (!(conf & TX39_CONF_ICE))
printk(KERN_INFO "TX3927 I-Cache disabled.\n");
if (!(conf & TX39_CONF_DCE))
printk(KERN_INFO "TX3927 D-Cache disabled.\n");
else if (!(conf & TX39_CONF_WBON))
printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
else if (!(conf & TX39_CONF_CWFON))
printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
else
printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
}
void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
{
txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
TXX9_IMCLK);
txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
}
void __init tx3927_setup_serial(unsigned int cts_mask)
{
#ifdef CONFIG_SERIAL_TXX9
int i;
struct uart_port req;
for (i = 0; i < 2; i++) {
memset(&req, 0, sizeof(req));
req.line = i;
req.iotype = UPIO_MEM;
req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
req.mapbase = TX3927_SIO_REG(i);
req.irq = TXX9_IRQ_BASE + TX3927_IR_SIO(i);
if (!((1 << i) & cts_mask))
req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
req.uartclk = TXX9_IMCLK;
early_serial_txx9_setup(&req);
}
#endif /* CONFIG_SERIAL_TXX9 */
}
|
