1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
|
if ETRAX_ARCH_V10
# ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
config CRIS_LOW_MAP
bool
depends on ETRAX_ARCH_V10 && ETRAX100LX
default y
config ETRAX_DRAM_VIRTUAL_BASE
hex
depends on ETRAX_ARCH_V10
default "c0000000" if !ETRAX100LX
default "60000000" if ETRAX100LX
choice
prompt "Product LED port"
depends on ETRAX_ARCH_V10
default ETRAX_PA_LEDS
config ETRAX_PA_LEDS
bool "Port-PA-LEDs"
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
<file:include/asm-cris/io.h>, and those macros are defined after what
YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PA. Some products
put the leds on PB or a memory-mapped latch (CSP0) instead.
config ETRAX_PB_LEDS
bool "Port-PB-LEDs"
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
<file:include/asm-cris/io.h>, and those macros are defined after what
YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on port PB. Some products
put the leds on PA or a memory-mapped latch (CSP0) instead.
config ETRAX_CSP0_LEDS
bool "Port-CSP0-LEDs"
help
The ETRAX network driver is responsible for flashing LED's when
packets arrive and are sent. It uses macros defined in
<file:include/asm-cris/io.h>, and those macros are defined after what
YOU choose in this option. The actual bits used are configured
separately. Select this if the LEDs are on a memory-mapped latch
using chip select CSP0, this is mapped at 0x90000000.
Some products put the leds on PA or PB instead.
config ETRAX_NO_LEDS
bool "None"
help
Select this option if you don't have any LED at all.
endchoice
config ETRAX_LED1G
int "First green LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "2"
help
Bit to use for the first green LED.
Most Axis products use bit 2 here.
config ETRAX_LED1R
int "First red LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "3"
help
Bit to use for the first red LED.
Most Axis products use bit 3 here.
For products with only one controllable LED,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED2G
int "Second green LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "4"
help
Bit to use for the second green LED. The "Active" LED.
Most Axis products use bit 4 here.
For products with only one controllable LED,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED2R
int "Second red LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "5"
help
Bit to use for the second red LED.
Most Axis products use bit 5 here.
For products with only one controllable LED,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED3G
int "Third green LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "2"
help
Bit to use for the third green LED. The "Drive" LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED3R
int "Third red LED bit"
depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
default "2"
help
Bit to use for the third red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED4R
int "Fourth red LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the fourth red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED4G
int "Fourth green LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the fourth green LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED5R
int "Fifth red LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the fifth red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED5G
int "Fifth green LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the fifth green LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED6R
int "Sixth red LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the sixth red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED6G
int "Sixth green LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the sixth green LED. The "Drive" LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED7R
int "Seventh red LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the seventh red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED7G
int "Seventh green LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the seventh green LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED8Y
int "Eighth yellow LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the eighth yellow LED. The "Drive" LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED9Y
int "Ninth yellow LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the ninth yellow LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED10Y
int "Tenth yellow LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the tenth yellow LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED11Y
int "Eleventh yellow LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the eleventh yellow LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
config ETRAX_LED12R
int "Twelfth red LED bit"
depends on ETRAX_CSP0_LEDS
default "2"
help
Bit to use for the twelfth red LED.
For products with only one or two controllable LEDs,
set this to same as CONFIG_ETRAX_LED1G (normally 2).
choice
prompt "Product debug-port"
depends on ETRAX_ARCH_V10
default ETRAX_DEBUG_PORT0
config ETRAX_DEBUG_PORT0
bool "Serial-0"
help
Choose a serial port for the ETRAX debug console. Default to
port 0.
config ETRAX_DEBUG_PORT1
bool "Serial-1"
help
Use serial port 1 for the console.
config ETRAX_DEBUG_PORT2
bool "Serial-2"
help
Use serial port 2 for the console.
config ETRAX_DEBUG_PORT3
bool "Serial-3"
help
Use serial port 3 for the console.
config ETRAX_DEBUG_PORT_NULL
bool "disabled"
help
Disable serial-port debugging.
endchoice
choice
prompt "Kernel GDB port"
depends on ETRAX_KGDB
default ETRAX_KGDB_PORT0
help
Choose a serial port for kernel debugging. NOTE: This port should
not be enabled under Drivers for built-in interfaces (as it has its
own initialization code) and should not be the same as the debug port.
config ETRAX_KGDB_PORT0
bool "Serial-0"
help
Use serial port 0 for kernel debugging.
config ETRAX_KGDB_PORT1
bool "Serial-1"
help
Use serial port 1 for kernel debugging.
config ETRAX_KGDB_PORT2
bool "Serial-2"
help
Use serial port 2 for kernel debugging.
config ETRAX_KGDB_PORT3
bool "Serial-3"
help
Use serial port 3 for kernel debugging.
endchoice
choice
prompt "Product rescue-port"
depends on ETRAX_ARCH_V10
default ETRAX_RESCUE_SER0
config ETRAX_RESCUE_SER0
bool "Serial-0"
help
Select one of the four serial ports as a rescue port. The default
is port 0.
config ETRAX_RESCUE_SER1
bool "Serial-1"
help
Use serial port 1 as the rescue port.
config ETRAX_RESCUE_SER2
bool "Serial-2"
help
Use serial port 2 as the rescue port.
config ETRAX_RESCUE_SER3
bool "Serial-3"
help
Use serial port 3 as the rescue port.
endchoice
config ETRAX_DEF_R_WAITSTATES
hex "R_WAITSTATES"
depends on ETRAX_ARCH_V10
default "95a6"
help
Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a
good choice for most Axis products...
config ETRAX_DEF_R_BUS_CONFIG
hex "R_BUS_CONFIG"
depends on ETRAX_ARCH_V10
default "104"
help
Assorted bits controlling write mode, DMA burst length etc. 104 is
a good choice for most Axis products...
config ETRAX_SDRAM
bool "SDRAM support"
depends on ETRAX_ARCH_V10
help
Enable this if you use SDRAM chips and configure
R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
config ETRAX_DEF_R_DRAM_CONFIG
hex "R_DRAM_CONFIG"
depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
default "1a200040"
help
The R_DRAM_CONFIG register specifies everything on how the DRAM
chips in the system are connected to the ETRAX CPU. This is
different depending on the manufacturer, chip type and number of
chips. So this value often needs to be different for each Axis
product.
config ETRAX_DEF_R_DRAM_TIMING
hex "R_DRAM_TIMING"
depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
default "5611"
help
Different DRAM chips have different speeds. Current Axis products
use 50ns DRAM chips which can use the timing: 5611.
config ETRAX_DEF_R_SDRAM_CONFIG
hex "R_SDRAM_CONFIG"
depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
default "d2fa7878"
help
The R_SDRAM_CONFIG register specifies everything on how the SDRAM
chips in the system are connected to the ETRAX CPU. This is
different depending on the manufacturer, chip type and number of
chips. So this value often needs to be different for each Axis
product.
config ETRAX_DEF_R_SDRAM_TIMING
hex "R_SDRAM_TIMING"
depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
default "80004801"
help
Different SDRAM chips have different timing.
config ETRAX_DEF_R_PORT_PA_DIR
hex "R_PORT_PA_DIR"
depends on ETRAX_ARCH_V10
default "1c"
help
Configures the direction of general port A bits. 1 is out, 0 is in.
This is often totally different depending on the product used.
There are some guidelines though - if you know that only LED's are
connected to port PA, then they are usually connected to bits 2-4
and you can therefore use 1c. On other boards which don't have the
LED's at the general ports, these bits are used for all kinds of
stuff. If you don't know what to use, it is always safe to put all
as inputs, although floating inputs isn't good.
config ETRAX_DEF_R_PORT_PA_DATA
hex "R_PORT_PA_DATA"
depends on ETRAX_ARCH_V10
default "00"
help
Configures the initial data for the general port A bits. Most
products should use 00 here.
config ETRAX_DEF_R_PORT_PB_CONFIG
hex "R_PORT_PB_CONFIG"
depends on ETRAX_ARCH_V10
default "00"
help
Configures the type of the general port B bits. 1 is chip select,
0 is port. Most products should use 00 here.
config ETRAX_DEF_R_PORT_PB_DIR
hex "R_PORT_PB_DIR"
depends on ETRAX_ARCH_V10
default "00"
help
Configures the direction of general port B bits. 1 is out, 0 is in.
This is often totally different depending on the product used. Bits
0 and 1 on port PB are usually used for I2C communication, but the
kernel I2C driver sets the appropriate directions itself so you
don't need to take that into consideration when setting this option.
If you don't know what to use, it is always safe to put all as
inputs.
config ETRAX_DEF_R_PORT_PB_DATA
hex "R_PORT_PB_DATA"
depends on ETRAX_ARCH_V10
default "ff"
help
Configures the initial data for the general port A bits. Most
products should use FF here.
config ETRAX_SOFT_SHUTDOWN
bool "Software Shutdown Support"
depends on ETRAX_ARCH_V10
help
Enable this if ETRAX is used with a power-supply that can be turned
off and on with PS_ON signal. Gives the possibility to detect
powerbutton and then do a power off after unmounting disks.
config ETRAX_SHUTDOWN_BIT
int "Shutdown bit on port CSP0"
depends on ETRAX_SOFT_SHUTDOWN
default "12"
help
Configure what pin on CSPO-port that is used for controlling power
supply.
config ETRAX_POWERBUTTON_BIT
int "Power button bit on port G"
depends on ETRAX_SOFT_SHUTDOWN
default "25"
help
Configure where power button is connected.
endif
|
