blob: d1ba87793e9bbc153e13de2cd85cd30f1e1f6acd (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
/*
* Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
*
* Copyright (C) 2004-2009 Analog Device Inc.
*
* Licensed under the GPL-2
*/
#ifndef _BLACKFIN_DPMC_H_
#define _BLACKFIN_DPMC_H_
#include <mach/pll.h>
/* PLL_CTL Masks */
#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
#define PLL_OFF 0x0002 /* PLL Not Powered */
#define STOPCK 0x0008 /* Core Clock Off */
#define PDWN 0x0020 /* Enter Deep Sleep Mode */
#ifdef __ADSPBF539__
# define IN_DELAY 0x0014 /* Add 200ps Delay To EBIU Input Latches */
# define OUT_DELAY 0x00C0 /* Add 200ps Delay To EBIU Output Signals */
#else
# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
#endif
#define BYPASS 0x0100 /* Bypass the PLL */
#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */
#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
/* PLL_DIV Masks */
#define SSEL 0x000F /* System Select */
#define CSEL 0x0030 /* Core Select */
#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
#define CCLK_DIV1 CSEL_DIV1
#define CCLK_DIV2 CSEL_DIV2
#define CCLK_DIV4 CSEL_DIV4
#define CCLK_DIV8 CSEL_DIV8
#define SET_SSEL(x) ((x) & 0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
/* PLL_STAT Masks */
#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
#define FULL_ON 0x0002 /* Processor In Full On Mode */
#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
#define RTCWS 0x0400 /* RTC/Reset Wake-Up Status */
#define CANWS 0x0800 /* CAN Wake-Up Status */
#define USBWS 0x2000 /* USB Wake-Up Status */
#define KPADWS 0x4000 /* Keypad Wake-Up Status */
#define ROTWS 0x8000 /* Rotary Wake-Up Status */
#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
/* VR_CTL Masks */
#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */
#else
#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
#endif
#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
#define GAIN 0x000C /* Voltage Level Gain */
#define GAIN_5 0x0000 /* GAIN = 5 */
#define GAIN_10 0x0004 /* GAIN = 1 */
#define GAIN_20 0x0008 /* GAIN = 2 */
#define GAIN_50 0x000C /* GAIN = 5 */
#define VLEV 0x00F0 /* Internal Voltage Level */
#ifdef __ADSPBF52x__
#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
#else
#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
#endif
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
#define GPWE 0x0400 /* General-Purpose Wake-Up Enable */
#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */
#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
#else
#define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */
#endif
#ifndef __ASSEMBLY__
void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void do_hibernate(int wakeup);
void set_dram_srfs(void);
void unset_dram_srfs(void);
#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
#ifdef CONFIG_CPU_FREQ
#define CPUFREQ_CPU 0
#endif
struct bfin_dpmc_platform_data {
const unsigned int *tuple_tab;
unsigned short tabsize;
unsigned short vr_settling_time; /* in us */
};
#endif
#endif /*_BLACKFIN_DPMC_H_*/
|
