1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
|
/*
* linux/arch/arm/mach-sa1100/collie.c
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains all Collie-specific tweaks.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ChangeLog:
* 2006 Pavel Machek <pavel@suse.cz>
* 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <asm/arch/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/arch/collie.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
#include <asm/arch/mcp.h>
#include "generic.h"
static struct resource collie_scoop_resources[] = {
[0] = {
.start = 0x40800000,
.end = 0x40800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config collie_scoop_setup = {
.io_dir = COLLIE_SCOOP_IO_DIR,
.io_out = COLLIE_SCOOP_IO_OUT,
};
struct platform_device colliescoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &collie_scoop_setup,
},
.num_resources = ARRAY_SIZE(collie_scoop_resources),
.resource = collie_scoop_resources,
};
static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
{
.dev = &colliescoop_device.dev,
.irq = COLLIE_IRQ_GPIO_CF_IRQ,
.cd_irq = COLLIE_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config collie_pcmcia_config = {
.devs = &collie_pcmcia_scoop[0],
.num_devs = 1,
};
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
};
#ifdef CONFIG_SHARP_LOCOMO
/*
* low-level UART features.
*/
struct platform_device collie_locomo_device;
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (mctrl & TIOCM_RTS)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
if (mctrl & TIOCM_DTR)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
}
static u_int collie_uart_get_mctrl(struct uart_port *port)
{
int ret = TIOCM_CD;
unsigned int r;
r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
if (r == -ENODEV)
return ret;
if (r & LOCOMO_GPIO_CTS)
ret |= TIOCM_CTS;
if (r & LOCOMO_GPIO_DSR)
ret |= TIOCM_DSR;
return ret;
}
static struct sa1100_port_fns collie_port_fns __initdata = {
.set_mctrl = collie_uart_set_mctrl,
.get_mctrl = collie_uart_get_mctrl,
};
static int collie_uart_probe(struct locomo_dev *dev)
{
return 0;
}
static int collie_uart_remove(struct locomo_dev *dev)
{
return 0;
}
static struct locomo_driver collie_uart_driver = {
.drv = {
.name = "collie_uart",
},
.devid = LOCOMO_DEVID_UART,
.probe = collie_uart_probe,
.remove = collie_uart_remove,
};
static int __init collie_uart_init(void) {
return locomo_driver_register(&collie_uart_driver);
}
device_initcall(collie_uart_init);
#endif
static struct resource locomo_resources[] = {
[0] = {
.start = 0x40000000,
.end = 0x40001fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO25,
.end = IRQ_GPIO25,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
};
static struct platform_device *devices[] __initdata = {
&collie_locomo_device,
&colliescoop_device,
};
static struct mtd_partition collie_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x000C0000,
.mask_flags = MTD_WRITEABLE
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0x00100000,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x00e20000,
}
};
static void collie_set_vpp(int vpp)
{
write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
if (vpp)
write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
else
write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
.set_vpp = collie_set_vpp,
.parts = collie_partitions,
.nr_parts = ARRAY_SIZE(collie_partitions),
};
static struct resource collie_flash_resources[] = {
{
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}
};
static void __init collie_init(void)
{
int ret = 0;
/* cpu initialize */
GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
GPIO_MCP_CLK | GPIO_32_768kHz;
GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
PGSR = COLLIE_GPIO_nREMOCON_ON;
PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
PCFR = PCFR_OPDE;
platform_scoop_config = &collie_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
sa11x0_set_mcp_data(&collie_mcp_data);
sharpsl_save_param();
}
static struct map_desc collie_io_desc[] __initdata = {
{ /* 32M main flash (cs0) */
.virtual = 0xe8000000,
.pfn = __phys_to_pfn(0x00000000),
.length = 0x02000000,
.type = MT_DEVICE
}, { /* 32M boot flash (cs1) */
.virtual = 0xea000000,
.pfn = __phys_to_pfn(0x08000000),
.length = 0x02000000,
.type = MT_DEVICE
}
};
static void __init collie_map_io(void)
{
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
#ifdef CONFIG_SHARP_LOCOMO
sa1100_register_uart_fns(&collie_port_fns);
#endif
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
}
MACHINE_START(COLLIE, "Sharp-Collie")
.phys_io = 0x80000000,
.io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
.map_io = collie_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
MACHINE_END
|
