/*
* linux/arch/arm/mach-omap2/board-3430sdp.c
*
* Copyright (C) 2007 Texas Instruments
*
* Modified from mach-omap2/board-generic.c
*
* Initial code: Syed Mohammed Khasim
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/gpmc-smc91x.h>
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include "pm.h"
#include "control.h"
#define CONFIG_DISABLE_HFCLK 1
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
#define ENABLE_VAUX3_DEDICATED 0x03
#define ENABLE_VAUX3_DEV_GRP 0x20
#define TWL4030_MSECURE_GPIO 22
/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
static struct cpuidle_params omap3_cpuidle_params_table[] = {
/* C1 */
{1, 2, 2, 5},
/* C2 */
{1, 10, 10, 30},
/* C3 */
{1, 50, 50, 300},
/* C4 */
{1, 1500, 1800, 4000},
/* C5 */
{1, 2500, 7500, 12000},
/* C6 */
{1, 3000, 8500, 15000},
/* C7 */
{1, 10000, 30000, 300000},
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(0, 3, KEY_B),
KEY(0, 4, KEY_C),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_F),
KEY(1, 4, KEY_G),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_I),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_K),
KEY(2, 4, KEY_3),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 3, KEY_P),
KEY(3, 4, KEY_Q),
KEY(4, 0, KEY_R),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_T),
KEY(4, 3, KEY_U),
KEY(4, 4, KEY_D),
KEY(5, 0, KEY_V),
KEY(5, 1, KEY_W),
KEY(5, 2, KEY_L),
KEY(5, 3, KEY_S),
KEY(5, 4, KEY_H),
0
};
static struct matrix_keymap_data board_map_data = {
.keymap = board_keymap,
.keymap_size = ARRAY_SIZE(board_keymap),
};
static struct twl4030_keypad_data sdp3430_kp_data = {
.keymap_data = &board_map_data,
.rows = 5,
.cols = 6,
.rep = 1,
};
static int ts_gpio; /* Needed for ads7846_get_pendown_state */
/**
* @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
*
* @return - void. If request gpio fails then Flag KERN_ERR.
*/
static void ads7846_dev_init(void)
{
if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
printk(KERN_ERR "can't get ads746 pen down GPIO\n");
return;
}
gpio_direction_input(ts_gpio);
gpio_set_debounce(ts_gpio, 310);
}
static int ads7846_get_pendown_state(void)
{
return !gpio_get_value(ts_gpio);
}
static struct ads7846_platform_data tsc2046_config __initdata = {
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
.wakeup = true,
};
static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
[0] = {
/*
* TSC2046 operates at a max freqency of 2MHz, so
* operate slightly below at 1.5MHz
*/
.modalias = "ads7846",
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 1500000,
.controller_data = &tsc2046_mcspi_config,
.irq = 0,
.platform_data = &tsc2046_config,
},
};
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
static unsigned backlight_gpio;
static unsigned enable_gpio;
static int lcd_enabled;
static int dvi_enabled;
static void<