1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
/*
* linux/arch/alpha/kernel/sys_jensen.c
*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 1998, 1999 Richard Henderson
*
* Code supporting the Jensen.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/jensen.h>
#undef __EXTERN_INLINE
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
/*
* Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
* 0x9X0 for the local motherboard interrupts.
*
* Note especially that those local interrupts CANNOT be masked,
* which causes much of the pain below...
*
* 0x660 - NMI
*
* 0x800 - IRQ0 interval timer (not used, as we use the RTC timer)
* 0x810 - IRQ1 line printer (duh..)
* 0x860 - IRQ6 floppy disk
*
* 0x900 - COM1
* 0x920 - COM2
* 0x980 - keyboard
* 0x990 - mouse
*
* PCI-based systems are more sane: they don't have the local
* interrupts at all, and have only normal PCI interrupts from
* devices. Happily it's easy enough to do a sane mapping from the
* Jensen.
*
* Note that this means that we may have to do a hardware
* "local_op" to a different interrupt than we report to the rest of the
* world.
*/
static void
jensen_local_enable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (d->irq == 7)
i8259a_enable_irq(d);
}
static void
jensen_local_disable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (d->irq == 7)
i8259a_disable_irq(d);
}
static void
jensen_local_mask_ack(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (d->irq == 7)
i8259a_mask_and_ack_irq(d);
}
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
.irq_unmask = jensen_local_enable,
.irq_mask = jensen_local_disable,
.irq_mask_ack = jensen_local_mask_ack,
};
static void
jensen_device_interrupt(unsigned long vector)
{
int irq;
switch (vector) {
case 0x660:
printk("Whee.. NMI received. Probable hardware error\n");
printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
return;
/* local device interrupts: */
case 0x900: irq = 4; break; /* com1 -> irq 4 */
case 0x920: irq = 3; break; /* com2 -> irq 3 */
case 0x980: irq = 1; break; /* kbd -> irq 1 */
case 0x990: irq = 9; break; /* mouse -> irq 9 */
default:
if (vector > 0x900) {
printk("Unknown local interrupt %lx\n", vector);
return;
}
irq = (vector - 0x800) >> 4;
if (irq == 1)
irq = 7;
break;
}
/* If there is no handler yet... */
if (!irq_has_action(irq)) {
/* If it is a local interrupt that cannot be masked... */
if (vector >= 0x900)
{
/* Clear keyboard/mouse state */
inb(0x64);
inb(0x60);
/* Reset serial ports */
inb(0x3fa);
inb(0x2fa);
outb(0x0c, 0x3fc);
outb(0x0c, 0x2fc);
/* Clear NMI */
outb(0,0x61);
outb(0,0x461);
}
}
#if 0
/* A useful bit of code to find out if an interrupt is going wild. */
{
static unsigned int last_msg = 0, last_cc = 0;
static int last_irq = -1, count = 0;
unsigned int cc;
__asm __volatile("rpcc %0" : "=r"(cc));
++count;
#define JENSEN_CYCLES_PER_SEC (150000000)
if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
irq != last_irq) {
printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
irq, count, cc-last_cc, get_irq_regs()->pc);
count = 0;
last_msg = cc;
last_irq = irq;
}
last_cc = cc;
}
#endif
handle_irq(irq);
}
static void __init
jensen_init_irq(void)
{
init_i8259a_irqs();
irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
common_init_isa_dma();
}
static void __init
jensen_init_arch(void)
{
struct pci_controller *hose;
#ifdef CONFIG_PCI
static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
isa_bridge = &fake_isa_bridge;
#endif
/* Create a hose so that we can report i/o base addresses to
userland. */
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
hose->dense_mem_base = 0;
hose->sparse_io_base = EISA_IO - IDENT_ADDR;
hose->dense_io_base = 0;
hose->sg_isa = hose->sg_pci = NULL;
__direct_map_base = 0;
__direct_map_size = 0xffffffff;
}
static void
jensen_machine_check(unsigned long vector, unsigned long la)
{
printk(KERN_CRIT "Machine check\n");
}
/*
* The System Vector
*/
struct alpha_machine_vector jensen_mv __initmv = {
.vector_name = "Jensen",
DO_EV4_MMU,
IO_LITE(JENSEN,jensen),
.machine_check = jensen_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.rtc_port = 0x170,
.rtc_get_time = common_get_rtc_time,
.rtc_set_time = common_set_rtc_time,
.nr_irqs = 16,
.device_interrupt = jensen_device_interrupt,
.init_arch = jensen_init_arch,
.init_irq = jensen_init_irq,
.init_rtc = common_init_rtc,
.init_pci = NULL,
.kill_arch = NULL,
};
ALIAS_MV(jensen)
|
