1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
* Marvell 88PM860x Power Management IC
Required parent device properties:
- compatible : "marvell,88pm860x"
- reg : the I2C slave address for the 88pm860x chip
- interrupts : IRQ line for the 88pm860x chip
- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
- #interrupt-cells : should be 1.
- The cell is the 88pm860x local IRQ number
Optional parent device properties:
- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
of one chip, and this property stores the I2C address of
another chip.
88pm860x consists of a large and varied group of sub-devices:
Device Supply Names Description
------ ------------ -----------
88pm860x-onkey : : On key
88pm860x-rtc : : RTC
88pm8607 : : Regulators
88pm860x-backlight : : Backlight
88pm860x-led : : Led
88pm860x-touch : : Touchscreen
Example:
pmic: 88pm860x@34 {
compatible = "marvell,88pm860x";
reg = <0x34>;
interrupts = <4>;
interrupt-parent = <&intc>;
interrupt-controller;
#interrupt-cells = <1>;
marvell,88pm860x-irq-read-clr;
marvell,88pm860x-slave-addr = <0x11>;
regulators {
BUCK1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
regulator-boot-on;
regulator-always-on;
};
};
rtc {
marvell,88pm860x-vrtc = <1>;
};
touch {
marvell,88pm860x-gpadc-prebias = <1>;
marvell,88pm860x-gpadc-slot-cycle = <1>;
marvell,88pm860x-tsi-prebias = <6>;
marvell,88pm860x-pen-prebias = <16>;
marvell,88pm860x-pen-prechg = <2>;
marvell,88pm860x-resistor-X = <300>;
};
backlights {
backlight-0 {
marvell,88pm860x-iset = <4>;
marvell,88pm860x-pwm = <3>;
};
backlight-2 {
};
};
leds {
led0-red {
marvell,88pm860x-iset = <12>;
};
led0-green {
marvell,88pm860x-iset = <12>;
};
led0-blue {
marvell,88pm860x-iset = <12>;
};
};
};
|
