/* linux/net/ipv4/arp.c * * Copyright (C) 1994 by Florian La Roche * * This module implements the Address Resolution Protocol ARP (RFC 826), * which is used to convert IP addresses (or in the future maybe other * high-level addresses) into a low-level hardware address (like an Ethernet * address). * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * Fixes: * Alan Cox : Removed the Ethernet assumptions in * Florian's code * Alan Cox : Fixed some small errors in the ARP * logic * Alan Cox : Allow >4K in /proc * Alan Cox : Make ARP add its own protocol entry * Ross Martin : Rewrote arp_rcv() and arp_get_info() * Stephen Henson : Add AX25 support to arp_get_info() * Alan Cox : Drop data when a device is downed. * Alan Cox : Use init_timer(). * Alan Cox : Double lock fixes. * Martin Seine : Move the arphdr structure * to if_arp.h for compatibility. * with BSD based programs. * Andrew Tridgell : Added ARP netmask code and * re-arranged proxy handling. * Alan Cox : Changed to use notifiers. * Niibe Yutaka : Reply for this device or proxies only. * Alan Cox : Don't proxy across hardware types! * Jonathan Naylor : Added support for NET/ROM. * Mike Shaver : RFC1122 checks. * Jonathan Naylor : Only lookup the hardware address for * the correct hardware type. * Germano Caronni : Assorted subtle races. * Craig Schlenter : Don't modify permanent entry * during arp_rcv. * Russ Nelson : Tidied up a few bits. * Alexey Kuznetsov: Major changes to caching and behaviour, * eg intelligent arp probing and * generation * of host down events. * Alan Cox : Missing unlock in device events. * Eckes : ARP ioctl control errors. * Alexey Kuznetsov: Arp free fix. * Manuel Rodriguez: Gratuitous ARP. * Jonathan Layes : Added arpd support through kerneld * message queue (960314) * Mike Shaver : /proc/sys/net/ipv4/arp_* support * Mike McLagan : Routing by source * Stuart Cheshire : Metricom and grat arp fixes * *** FOR 2.1 clean this up *** * Lawrence V. Stefani: (08/12/96) Added FDDI support. * Alan Cox : Took the AP1000 nasty FDDI hack and * folded into the mainstream FDDI code. * Ack spit, Linus how did you allow that * one in... * Jes Sorensen : Make FDDI work again in 2.1.x and * clean up the APFDDI & gen. FDDI bits. * Alexey Kuznetsov: new arp state machine; * now it is in net/core/neighbour.c. * Krzysztof Halasa: Added Frame Relay ARP support. * Arnaldo C. Melo : convert /proc/net/arp to seq_file * Shmulik Hen: Split arp_send to arp_create and * arp_xmit so intermediate drivers like * bonding can change the skb before * sending (e.g. insert 8021q tag). * Harald Welte : convert to make use of jenkins hash * Jesper D. Brouer: Proxy ARP PVLAN RFC 3069 support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SYSCTL #include #endif #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE) #include struct neigh_table *clip_tbl_hook; EXPORT_SYMBOL(clip_tbl_hook); #endif #include #include #include /* * Interface to generic neighbour cache. */ static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 rnd); static int arp_constructor(struct neighbour *neigh); static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb); static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb); static void parp_redo(struct sk_buff *skb); static const struct neigh_ops arp_generic_ops = { .family = AF_INET, .solicit = arp_solicit, .error_report = arp_error_report, .output = neigh_resolve_output, .connected_output = neigh_connected_output, .hh_output = dev_queue_xmit, .queue_xmit = dev_queue_xmit, }; static const struct neigh_ops arp_hh_ops = { .family = AF_INET, .solicit = arp_solicit, .error_report = arp_error_report, .output = neigh_resolve_output, .connected_output = neigh_resolve_output, .hh_output = dev_queue_xmit, .queue_xmit = dev_queue_xmit, }; static const struct neigh_ops arp_direct_ops = { .family = AF_INET, .output = dev_queue_xmit, .connected_output = dev_queue_xmit, .hh_output = dev_queue_xmit, .queue_xmit = dev_queue_xmit, }; static const struct neigh_ops arp_broken_ops = { .family = AF_INET, .solicit = arp_solicit, .error_report = arp_error_report, .output = neigh_compat_output, .connected_output = neigh_compat_output, .hh_output = dev_queue_xmit, .queue_xmit = dev_queue_xmit, }; struct neigh_table arp_tbl = { .family = AF_INET, .entry_size = sizeof(struct neighbour) + 4, .key_len = 4, .hash = arp_hash, .constructor = arp_constructor, .proxy_redo = parp_redo, .id = "arp_cache", .parms = { .tbl = &arp_tbl, .base_reachable_time = 30 * HZ, .retrans_time = 1 * HZ, .gc_staletime = 60 * HZ, .reachable_time = 30 * HZ, .delay_probe_time = 5 * HZ, .queue_len = 3, .ucast_probes = 3, .mcast_probes = 3, .anycast_delay = 1 * HZ, .proxy_delay = (8 * HZ) / 10, .proxy_qlen = 64, .locktime = 1 * HZ, }, .gc_interval = 30 * HZ, .gc_thresh1 = 128, .gc_thresh2 = 512, .gc_thresh3 = 1024, }; EXPORT_SYMBOL(arp_tbl); int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir) { switch (dev->type) { case ARPHRD_ETHER: case ARPHRD_FDDI: case ARPHRD_IEEE802: ip_eth_mc_map(addr, haddr); return 0; case ARPHRD_IEEE802_TR: ip_tr_mc_map(addr, haddr); return 0; case ARPHRD_INFINIBAND: ip_ib_mc_map(addr, dev->broadcast, haddr); return 0; case ARPHRD_IPGRE: ip_ipgre_mc_map(addr, dev->broadcast, haddr); return 0; default: if (dir) { memcpy(haddr, dev->broadcast, dev->addr_len); return 0; } } return -EINVAL; } static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 hash_rnd) { return jhash_2words(*(u32 *)pkey, dev->ifindex, hash_rnd); } static int arp_constructor(struct neighbour *neigh) { __be32 addr = *(__be32 *)neigh->primary_key; struct net_device *dev = neigh->dev; struct in_device *in_dev; struct neigh_parms *parms; rcu_read_lock(); in_dev = __in_dev_get_rcu(dev); if (in_dev == NULL) { rcu_read_unlock(); return -EINVAL; } neigh->type = inet_addr_type(dev_net(dev), addr); parms = in_dev->arp_parms; __neigh_parms_put(neigh->parms); neigh->parms = neigh_parms_clone(parms); rcu_read_unlock(); if (!dev->header_ops) { neigh->nud_state = NUD_NOARP; neigh->ops = &arp_direct_ops; neigh->output = neigh->ops->queue_xmit; } else { /* Good devices (checked by reading texts, but only Ethernet is tested) ARPHRD_ETHER: (ethernet, apfddi) ARPHRD_FDDI: (fddi) ARPHRD_IEEE802: (tr) ARPHRD_METRICOM: (strip) ARPHRD_ARCNET: etc. etc. etc. ARPHRD_IPDDP will also work, if author repairs it. I did not it, because this driver does not work even in old paradigm. */ #if 1 /* So... these "amateur" devices are hopeless. The only thing, that I can say now: It is very sad that we need to keep ugly obsolete code to make them happy. They should be moved to more reasonable state, now they use rebuild_header INSTEAD OF hard_start_xmit!!! Besides that, they are sort of out of date (a lot of redundant clones/copies, useless in 2.1), I wonder why people believe that they work. */ switch (dev->type) { default: break; case ARPHRD_ROSE: #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) case ARPHRD_AX25: #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE) case ARPHRD_NETROM: #endif neigh->ops = &arp_broken_ops; neigh->output = neigh->ops->output; return 0; #else break; #endif } #endif if (neigh->type == RTN_MULTICAST) { neigh->nud_state = NUD_NOARP; arp_mc_map(addr, neigh->ha, dev, 1); } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) { neigh->nud_state = NUD_NOARP; memcpy(neigh->ha, dev->dev_addr, dev->addr_len); } else if (neigh->type == RTN_BROADCAST || (dev->flags & IFF_POINTOPOINT)) { neigh->nud_state = NUD_NOARP; memcpy(neigh->ha, dev->broadcast, dev->addr_len); } if (dev->header_ops->cache) neigh->ops = &arp_hh_ops; else neigh->ops = &arp_generic_ops; if (neigh->nud_state & NUD_VALID) neigh->output = neigh->ops->connected_output; else neigh->output = neigh->ops->output; } return 0; } static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb) { dst_link_failure(skb); kfree_skb(skb); } static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb) { __be32 saddr = 0; u8 *dst_ha = NULL; struct net_device *dev = neigh->dev; __be32 target = *(__be32 *)neigh->primary_key; int probes = atomic_read(&neigh->probes); struct in_device *in_dev; rcu_read_lock(); in_dev = __in_dev_get_rcu(dev); if (!in_dev) { rcu_read_unlock(); return; } switch (IN_DEV_ARP_ANNOUNCE(in_dev)) { default: case 0: /* By default announce any local IP */ if (skb && inet_addr_type(dev_net(dev), ip_hdr(skb)->saddr) == RTN_LOCAL) saddr = ip_hdr(skb)->saddr; break; case 1: /* Restrict announcements of saddr in same subnet */ if (!skb) break; saddr = ip_hdr(skb)->saddr; if (inet_addr_type(dev_net(dev), saddr) == RTN_LOCAL) { /* saddr should be known to target */ if (inet_addr_onlink(in_dev, target, saddr)) break; } saddr = 0; break; case 2: /* Avoid secondary IPs, get a primary/preferred one */ break; } rcu_read_unlock(); if (!saddr) saddr = inet_select_addr(dev, target, RT_SCOPE_LINK); probes -= neigh->parms->ucast_probes; if (probes < 0) { if (!(neigh->nud_state & NUD_VALID)) printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n"); dst_ha = neigh->ha; read_lock_bh(&neigh->lock); } else { probes -= neigh->parms->app_probes; if (probes < 0) { #ifdef CONFIG_ARPD neigh_app_ns(neigh); #endif return; } } arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr, dst_ha, dev->dev_addr, NULL); if (dst_ha) read_unlock_bh(&neigh->lock); } static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip) { int scope; switch (IN_DEV_ARP_IGNORE(in_dev)) { case 0: /* Reply, the tip is already validated */ return 0; case 1: /* Reply only if tip is configured on the incoming interface */ sip = 0; scope = RT_SCOPE_HOST; break; case 2: /* * Reply only if tip is configured on the incoming interface * and is in same subnet as sip */ scope = RT_SCOPE_HOST; break; case 3: /* Do not reply for scope host addresses */ sip = 0; scope = RT_SCOPE_LINK; break; case 4: /* Reserved */ case 5: case 6: case 7: return 0; case 8: /* Do not reply */ return 1; default: return 0; } return !inet_confirm_addr(in_dev, sip, tip, scope); } static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev) { struct rtable *rt; int flag = 0; /*unsigned long now; */ struct net *net = dev_net(dev); rt = ip_route_output(net, sip, tip, 0, 0); if (IS_ERR(rt)) return 1; if (rt->dst.dev != dev) { NET_INC_STATS_BH(net, LINUX_MIB_ARPFILTER); flag = 1; } ip_rt_put(rt); return flag; } /* OBSOLETE FUNCTIONS */ /* * Find an arp mapping in the cache. If not found, post a request. * * It is very UGLY routine: it DOES NOT use skb->dst->neighbour, * even if it exists. It is supposed that skb->dev was mangled * by a virtual device (eql, shaper). Nobody but broken devices * is allowed to use this function, it is scheduled to be removed. --ANK */ static int arp_set_predefined(int addr_hint, unsigned char *haddr, __be32 paddr, struct net_device *dev) { switch (addr_hint) { case RTN_LOCAL: printk(KERN_DEBUG "ARP: arp called for own IP address\n"); memcpy(haddr, dev->dev_addr, dev->addr_len); return 1; case RTN_MULTICAST: arp_mc_map(paddr, haddr, dev, 1); return 1; case RTN_BROADCAST: memcpy(haddr, dev->broadcast, dev->addr_len); return 1; } return 0; } int arp_find(unsigned char *haddr, struct sk_buff *skb) { struct net_device *dev = skb->dev; __be32 paddr; struct neighbour *n; if (!skb_dst(skb)) { printk(KERN_DEBUG "arp_find is called with dst==NULL\n"); kfree_skb(skb); return 1; } paddr = skb_rtable(skb)->rt_gateway; if (arp_set_predefined(inet_addr_type(dev_net(dev), paddr), haddr, paddr, dev)) return 0; n = __neigh_lookup(&arp_tbl, &paddr, dev, 1); if (n) { n->used = jiffies; if (n->nud_state & NUD_VALID || neigh_event_send(n, skb) == 0) { neigh_ha_snapshot(haddr, n, dev); neigh_release(n); return 0; } neigh_release(n); } else kfree_skb(skb); return 1; } EXPORT_SYMBOL(arp_find); /* END OF OBSOLETE FUNCTIONS */ struct neighbour *__arp_bind_neighbour(struct dst_entry *dst, __be32 nexthop) { struct net_device *dev = dst->dev; if (dev->flags & (IFF_LOOPBACK | IFF_POINTOPOINT)) nexthop = 0; return __neigh_lookup_errno( #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE) dev->type == ARPHRD_ATM ? clip_tbl_hook : #endif &arp_tbl, &nexthop, dev); } int arp_bind_neighbour(struct dst_entry *dst) { struct net_device *dev = dst->dev; struct neighbour *n = dst_get_neighbour(dst); if (dev == NULL) return -EINVAL; if (n == NULL) { n = __arp_bind_neighbour(dst, ((struct rtable *)dst)->rt_gateway); if (IS_ERR(n)) return PTR_ERR(n); dst_set_neighbour(dst, n); } return 0; } /* * Check if we can use proxy ARP for this path */ static inline int arp_fwd_proxy(struct in_device *in_dev, struct net_device *dev, struct rtable *rt) { struct in_device *out_dev; int imi, omi = -1; if (rt->dst.dev == dev) return 0; if (!IN_DEV_PROXY_ARP(in_dev)) return 0; imi = IN_DEV_MEDIUM_ID(in_dev); if (imi == 0) return 1; if (imi == -1) return 0; /* place to check for proxy_arp for routes */ out_dev = __in_dev_get_rcu(rt->dst.dev); if (out_dev) omi = IN_DEV_MEDIUM_ID(out_dev); return omi != imi && omi != -1; } /* * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev) * * RFC3069 supports proxy arp replies back to the same interface. This * is done to support (ethernet) switch features, like RFC 3069, where * the individual ports are not allowed to communicate with each * other, BUT they are allowed to talk to the upstream router. As * described in RFC 3069, it is possible to allow these hosts to * communicate through the upstream router, by proxy_arp'ing. * * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation" * * This technology is known by different names: * In RFC 3069 it is called VLAN Aggregation. * Cisco and Allied Telesyn call it Private VLAN. * Hewlett-Packard call it Source-Port filtering or port-isolation. * Ericsson call it MAC-Forced Forwarding (RFC Draft). * */ static inline int arp_fwd_pvlan(struct in_device *in_dev, struct net_device *dev, struct rtable *rt, __be32 sip, __be32 tip) { /* Private VLAN is only concerned about the same ethernet segment */ if (rt->dst.dev != dev) return 0; /* Don't reply on self probes (often done by windowz boxes)*/ if (sip == tip) return 0; if (IN_DEV_PROXY_ARP_PVLAN(in_dev)) return 1; else return 0; } /* * Interface to link layer: send routine and receive handler. */ /* * Create an arp packet. If (dest_hw == NULL), we create a broadcast * message. */ struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip, const unsigned char *dest_hw, const unsigned char *src_hw, const unsigned char *target_hw) { struct sk_buff *skb; struct arphdr *arp; unsigned char *arp_ptr; /* * Allocate a buffer */ skb = alloc_skb(arp_hdr_len(dev) + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC); if (skb == NULL) return NULL; skb_reserve(skb, LL_RESERVED_SPACE(dev)); skb_reset_network_header(skb); arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev)); skb->dev = dev; skb->protocol = htons(ETH_P_ARP); if (src_hw == NULL) src_hw = dev->dev_addr; if (dest_hw == NULL) dest_hw = dev->broadcast; /* * Fill the device header for the ARP frame */ if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0) goto out; /* * Fill out the arp protocol part. * * The arp hardware type should match the device type, except for FDDI, * which (according to RFC 1390) should always equal 1 (Ethernet). */ /* * Exceptions everywhere. AX.25 uses the AX.25 PID value not the * DIX code for the protocol. Make these device structure fields. */ switch (dev->type) { default: arp->ar_hrd = htons(dev->type); arp->ar_pro = htons(ETH_P_IP); break; #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) case ARPHRD_AX25: arp->ar_hrd = htons(ARPHRD_AX25); arp->ar_pro = htons(AX25_P_IP); break; #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE) case ARPHRD_NETROM: arp->ar_hrd = htons(ARPHRD_NETROM); arp->ar_pro = htons(AX25_P_IP); break; #endif #endif #if defined(CONFIG_FDDI) || defined(CONFIG_FDDI_MODULE) case ARPHRD_FDDI: arp->ar_hrd = htons(ARPHRD_ETHER); arp->ar_pro = htons(ETH_P_IP); break; #endif #if defined(CONFIG_TR) || defined(CONFIG_TR_MODULE) case ARPHRD_IEEE802_TR: arp->ar_hrd = htons(ARPHRD_IEEE802); arp->ar_pro = htons(ETH_P_IP); break; #endif } arp->ar_hln = dev->addr_len; arp->ar_pln = 4; arp->ar_op = htons(type); arp_ptr = (unsigned char *)(arp + 1); memcpy(arp_ptr, src_hw, dev->addr_len); arp_ptr += dev->addr_len; memcpy(arp_ptr, &src_ip, 4); arp_ptr += 4; if (target_hw != NULL) memcpy(arp_ptr, target_hw, dev->addr_len); else memset(arp_ptr, 0, dev->addr_len); arp_ptr += dev->addr_len; memcpy(arp_ptr, &dest_ip, 4); return skb; out: kfree_skb(skb); return NULL; } EXPORT_SYMBOL(arp_create); /* * Send an arp packet. */ void arp_xmit(struct sk_buff *skb) { /* Send it off, maybe filter it using firewalling first. */ NF_HOOK(NFPROTO_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit); } EXPORT_SYMBOL(arp_xmit); /* * Create and send an arp packet. */ void arp_send(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip, const unsigned char *dest_hw, const unsigned char *src_hw, const unsigned char *target_hw) { struct sk_buff *skb; /* * No arp on this interface. */ if (dev->flags&IFF_NOARP) return; skb = arp_create(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw, target_hw); if (skb == NULL) return; arp_xmit(skb); } EXPORT_SYMBOL(arp_send); /* * Process an arp request. */ static int arp_process(struct sk_buff *skb) { struct net_device *dev = skb->dev; struct in_device *in_dev = __in_dev_get_rcu(dev); struct arphdr *arp; unsigned char *arp_ptr; struct rtable *rt; unsigned char *sha; __be32 sip, tip; u16 dev_type = dev->type; int addr_type; struct neighbour *n; struct net *net = dev_net(dev); /* arp_rcv below verifies the ARP header and verifies the device * is ARP'able. */ if (in_dev == NULL) goto out; arp = arp_hdr(skb); switch (dev_type) { default: if (arp->ar_pro != htons(ETH_P_IP) || htons(dev_type) != arp->ar_hrd) goto out; break; case ARPHRD_ETHER: case ARPHRD_IEEE802_TR: case ARPHRD_FDDI: case ARPHRD_IEEE802: /* * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802 * devices, according to RFC 2625) devices will accept ARP * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2). * This is the case also of FDDI, where the RFC 1390 says that * FDDI devices should accept ARP hardware of (1) Ethernet, * however, to be more robust, we'll accept both 1 (Ethernet) * or 6 (IEEE 802.2) */ if ((arp->ar_hrd != htons(ARPHRD_ETHER) && arp->ar_hrd != htons(ARPHRD_IEEE802)) || arp->ar_pro != htons(ETH_P_IP)) goto out; break; case ARPHRD_AX25: if (arp->ar_pro != htons(AX25_P_IP) || arp->ar_hrd != htons(ARPHRD_AX25)) goto out; break; case ARPHRD_NETROM: if (arp->ar_pro != htons(AX25_P_IP) || arp->ar_hrd != htons(ARPHRD_NETROM)) goto out; break; } /* Understand only these message types */ if (arp->ar_op != htons(ARPOP_REPLY) && arp->ar_op != htons(ARPOP_REQUEST)) goto out; /* * Extract fields */ arp_ptr = (unsigned char *)(arp + 1); sha = arp_ptr; arp_ptr += dev->addr_len; memcpy(&sip, arp_ptr, 4); arp_ptr += 4; arp_ptr += dev->addr_len; memcpy(&tip, arp_ptr, 4); /* * Check for bad requests for 127.x.x.x and requests for multicast * addresses. If this is one such, delete it. */ if (ipv4_is_loopback(tip) || ipv4_is_multicast(tip)) goto out; /* * Special case: We must set Frame Relay source Q.922 address */ if (dev_type == ARPHRD_DLCI) sha = dev->broadcast; /* * Process entry. The idea here is we want to send a reply if it is a * request for us or if it is a request for someone else that we hold * a proxy for. We want to add an entry to our cache if it is a reply * to us or if it is a request for our address. * (The assumption for this last is that if someone is requesting our * address, they are probably intending to talk to us, so it saves time * if we cache their address. Their address is also probably not in * our cache, since ours is not in their cache.) * * Putting this another way, we only care about replies if they are to * us, in which case we add them to the cache. For requests, we care * about those for us and those for our proxies. We reply to both, * and in the case of requests for us we add the requester to the arp * cache. */ /* Special case: IPv4 duplicate address detection packet (RFC2131) */ if (sip == 0) { if (arp->ar_op == htons(ARPOP_REQUEST) && inet_addr_type(net, tip) == RTN_LOCAL && !arp_ignore(in_dev, sip, tip)) arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha, dev->dev_addr, sha); goto out; } if (arp->ar_op == htons(ARPOP_REQUEST) && ip_route_input_noref(skb, tip, sip, 0, dev) == 0) { rt = skb_rtable(skb); addr_type = rt->rt_type; if (addr_type == RTN_LOCAL) { int dont_send; dont_send = arp_ignore(in_dev, sip, tip); if (!dont_send && IN_DEV_ARPFILTER(in_dev)) dont_send = arp_filter(sip, tip, dev); if (!dont_send) { n = neigh_event_ns(&arp_tbl, sha, &sip, dev); if (n) { arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha, dev->dev_addr, sha); neigh_release(n); } } goto out; } else if (IN_DEV_FORWARD(in_dev)) { if (addr_type == RTN_UNICAST && (arp_fwd_proxy(in_dev, dev, rt) || arp_fwd_pvlan(in_dev, dev, rt, sip, tip) || pneigh_lookup(&arp_tbl, net, &tip, dev, 0))) { n = neigh_event_ns(&arp_tbl, sha, &sip, dev); if (n) neigh_release(n); if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED || skb->pkt_type == PACKET_HOST || in_dev->arp_parms->proxy_delay == 0) { arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha, dev->dev_addr, sha); } else { pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb); return 0; } goto out; } } } /* Update our ARP tables */ n = __neigh_lookup(&arp_tbl, &sip, dev, 0); if (IPV4_DEVCONF_ALL(dev_net(dev), ARP_ACCEPT)) { /* Unsolicited ARP is not accepted by default. It is possible, that this option should be enabled for some devices (strip is candidate) */ if (n == NULL && (arp->ar_op == htons(ARPOP_REPLY) || (arp->ar_op == htons(ARPOP_REQUEST) && tip == sip)) && inet_addr_type(net, sip) == RTN_UNICAST) n = __neigh_lookup(&arp_tbl, &sip, dev, 1); } if (n) { int state = NUD_REACHABLE; int override; /* If several different ARP replies follows back-to-back, use the FIRST one. It is possible, if several proxy agents are active. Taking the first reply prevents arp trashing and chooses the fastest router. */ override = time_after(jiffies, n->updated + n->parms->locktime); /* Broadcast replies and request packets do not assert neighbour reachability. */ if (arp->ar_op != htons(ARPOP_REPLY) || skb->pkt_type != PACKET_HOST) state = NUD_STALE; neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0); neigh_release(n); } out: consume_skb(skb); return 0; } static void parp_redo(struct sk_buff *skb) { arp_process(skb); } /* * Receive an arp request from the device layer. */ static int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) { struct arphdr *arp; /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ if (!pskb_may_pull(skb, arp_hdr_len(dev))) goto freeskb; arp = arp_hdr(skb); if (arp->ar_hln != dev->addr_len || dev->flags & IFF_NOARP || skb->pkt_type == PACKET_OTHERHOST || skb->pkt_type == PACKET_LOOPBACK || arp->ar_pln != 4) goto freeskb; skb = skb_share_check(skb, GFP_ATOMIC); if (skb == NULL) goto out_of_mem; memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb)); return NF_HOOK(NFPROTO_ARP, NF_ARP_IN, skb, dev, NULL, arp_process); freeskb: kfree_skb(skb); out_of_mem: return 0; } /* * User level interface (ioctl) */ /* * Set (create) an ARP cache entry. */ static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on) { if (dev == NULL) { IPV4_DEVCONF_ALL(net, PROXY_ARP) = on; return 0; } if (__in_dev_get_rtnl(dev)) { IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on); return 0; } return -ENXIO; } static int arp_req_set_public(struct net *net, struct arpreq *r, struct net_device *dev) { __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr; if (mask && mask != htonl(0xFFFFFFFF)) return -EINVAL; if (!dev && (r->arp_flags & ATF_COM)) { dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family, r->arp_ha.sa_data); if (!dev) return -ENODEV; } if (mask) { if (pneigh_lookup(&arp_tbl, net, &ip, dev, 1) == NULL) return -ENOBUFS; return 0; } return arp_req_set_proxy(net, dev, 1); } static int arp_req_set(struct net *net, struct arpreq *r, struct net_device *dev) { __be32 ip; struct neighbour *neigh; int err; if (r->arp_flags & ATF_PUBL) return arp_req_set_public(net, r, dev); ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; if (r->arp_flags & ATF_PERM) r->arp_flags |= ATF_COM; if (dev == NULL) { struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0); if (IS_ERR(rt)) return PTR_ERR(rt); dev = rt->dst.dev; ip_rt_put(rt); if (!dev) return -EINVAL; } switch (dev->type) { #if defined(CONFIG_FDDI) || defined(CONFIG_FDDI_MODULE) case ARPHRD_FDDI: /* * According to RFC 1390, FDDI devices should accept ARP * hardware types of 1 (Ethernet). However, to be more * robust, we'll accept hardware types of either 1 (Ethernet) * or 6 (IEEE 802.2). */ if (r->arp_ha.sa_family != ARPHRD_FDDI && r->arp_ha.sa_family != ARPHRD_ETHER && r->arp_ha.sa_family != ARPHRD_IEEE802) return -EINVAL; break; #endif default: if (r->arp_ha.sa_family != dev->type) return -EINVAL; break; } neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev); err = PTR_ERR(neigh); if (!IS_ERR(neigh)) { unsigned state = NUD_STALE; if (r->arp_flags & ATF_PERM) state = NUD_PERMANENT; err = neigh_update(neigh, (r->arp_flags & ATF_COM) ? r->arp_ha.sa_data : NULL, state, NEIGH_UPDATE_F_OVERRIDE | NEIGH_UPDATE_F_ADMIN); neigh_release(neigh); } return err; } static unsigned arp_state_to_flags(struct neighbour *neigh) { if (neigh->nud_state&NUD_PERMANENT) return ATF_PERM | ATF_COM; else if (neigh->nud_state&NUD_VALID) return ATF_COM; else return 0; } /* * Get an ARP cache entry. */ static int arp_req_get(struct arpreq *r, struct net_device *dev) { __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr; struct neighbour *neigh; int err = -ENXIO; neigh = neigh_lookup(&arp_tbl, &ip, dev); if (neigh) { read_lock_bh(&neigh->lock); memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len); r->arp_flags = arp_state_to_flags(neigh); read_unlock_bh(&neigh->lock); r->arp_ha.sa_family = dev->type; strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev)); neigh_release(neigh); err = 0; } return err; } int arp_invalidate(struct net_device *dev, __be32 ip) { struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev); int err = -ENXIO; if (neigh) { if (neigh->nud_state & ~NUD_NOARP) err = neigh_update(neigh, NULL, NUD_FAILED, NEIGH_UPDATE_F_OVERRIDE| NEIGH_UPDATE_F_ADMIN); neigh_release(neigh); } return err; } EXPORT_SYMBOL(arp_invalidate); static int arp_req_delete_public(struct net *net, struct arpreq *r, struct net_device *dev) { __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr; __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr; if (mask == htonl(0xFFFFFFFF)) return pneigh_delete(&arp_tbl, net, &ip, dev); if (mask) return -EINVAL; return arp_req_set_proxy(net, dev, 0); } static int arp_req_delete(struct net *net, struct arpreq *r, struct net_device *dev) { __be32 ip; if (r->arp_flags & ATF_PUBL) return arp_req_delete_public(net, r, dev); ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr; if (dev == NULL) { struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0); if (IS_ERR(rt)) return PTR_ERR(rt); dev = rt->dst.dev; ip_rt_put(rt); if (!dev) return -EINVAL; } return arp_invalidate(dev, ip); } /* * Handle an ARP layer I/O control request. */ int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg) { int err; struct arpreq r; struct net_device *dev = NULL; switch (cmd) { case SIOCDARP: case SIOCSARP: if (!capable(CAP_NET_ADMIN)) return -EPERM; case SIOCGARP: err = copy_from_user(&r, arg, sizeof(struct arpreq)); if (err) return -EFAULT; break; default: return -EINVAL; } if (r.arp_pa.sa_family != AF_INET) return -EPFNOSUPPORT; if (!(r.arp_flags & ATF_PUBL) && (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB))) return -EINVAL; if (!(r.arp_flags & ATF_NETMASK)) ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr = htonl(0xFFFFFFFFUL); rtnl_lock(); if (r.arp_dev[0]) { err = -ENODEV; dev = __dev_get_by_name(net, r.arp_dev); if (dev == NULL) goto out; /* Mmmm... It is wrong... ARPHRD_NETROM==0 */ if (!r.arp_ha.sa_family) r.arp_ha.sa_family = dev->type; err = -EINVAL; if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type) goto out; } else if (cmd == SIOCGARP) { err = -ENODEV; goto out; } switch (cmd) { case SIOCDARP: err = arp_req_delete(net, &r, dev); break; case SIOCSARP: err = arp_req_set(net, &r, dev); break; case SIOCGARP: err = arp_req_get(&r, dev); break; } out: rtnl_unlock(); if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r))) err = -EFAULT; return err; } static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *dev = ptr; switch (event) { case NETDEV_CHANGEADDR: neigh_changeaddr(&arp_tbl, dev); rt_cache_flush(dev_net(dev), 0); break; default: break; } return NOTIFY_DONE; } static struct notifier_block arp_netdev_notifier = { .notifier_call = arp_netdev_event, }; /* Note, that it is not on notifier chain. It is necessary, that this routine was called after route cache will be flushed. */ void arp_ifdown(struct net_device *dev) { neigh_ifdown(&arp_tbl, dev); } /* * Called once on startup. */ static struct packet_type arp_packet_type __read_mostly = { .type = cpu_to_be16(ETH_P_ARP), .func = arp_rcv, }; static int arp_proc_init(void); void __init arp_init(void) { neigh_table_init(&arp_tbl); dev_add_pack(&arp_packet_type); arp_proc_init(); #ifdef CONFIG_SYSCTL neigh_sysctl_register(NULL, &arp_tbl.parms, "ipv4", NULL); #endif register_netdevice_notifier(&arp_netdev_notifier); } #ifdef CONFIG_PROC_FS #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) /* ------------------------------------------------------------------------ */ /* * ax25 -> ASCII conversion */ static char *ax2asc2(ax25_address *a, char *buf) { char c, *s; int n; for (n = 0, s = buf; n < 6; n++) { c = (a->ax25_call[n] >> 1) & 0x7F; if (c != ' ') *s++ = c; } *s++ = '-'; n = (a->ax25_call[6] >> 1) & 0x0F; if (n > 9) { *s++ = '1'; n -= 10; } *s++ = n + '0'; *s++ = '\0'; if (*buf == '\0' || *buf == '-') return "*"; return buf; } #endif /* CONFIG_AX25 */ #define HBUFFERLEN 30 static void arp_format_neigh_entry(struct seq_file *seq, struct neighbour *n) { char hbuffer[HBUFFERLEN]; int k, j; char tbuf[16]; struct net_device *dev = n->dev; int hatype = dev->type; read_lock(&n->lock); /* Convert hardware address to XX:XX:XX:XX ... form. */ #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM) ax2asc2((ax25_address *)n->ha, hbuffer); else { #endif for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) { hbuffer[k++] = hex_asc_hi(n->ha[j]); hbuffer[k++] = hex_asc_lo(n->ha[j]); hbuffer[k++] = ':'; } if (k != 0) --k; hbuffer[k] = 0; #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) } #endif sprintf(tbuf, "%pI4", n->primary_key); seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n", tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name); read_unlock(&n->lock); } static void arp_format_pneigh_entry(struct seq_file *seq, struct pneigh_entry *n) { struct net_device *dev = n->dev; int hatype = dev ? dev->type : 0; char tbuf[16]; sprintf(tbuf, "%pI4", n->key); seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n", tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00", dev ? dev->name : "*"); } static int arp_seq_show(struct seq_file *seq, void *v) { if (v == SEQ_START_TOKEN) { seq_puts(seq, "IP address HW type Flags " "HW address Mask Device\n"); } else { struct neigh_seq_state *state = seq->private; if (state->flags & NEIGH_SEQ_IS_PNEIGH) arp_format_pneigh_entry(seq, v); else arp_format_neigh_entry(seq, v); } return 0; } static void *arp_seq_start(struct seq_file *seq, loff_t *pos) { /* Don't want to confuse "arp -a" w/ magic entries, * so we tell the generic iterator to skip NUD_NOARP. */ return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP); } /* ------------------------------------------------------------------------ */ static const struct seq_operations arp_seq_ops = { .start = arp_seq_start, .next = neigh_seq_next, .stop = neigh_seq_stop, .show = arp_seq_show, }; static int arp_seq_open(struct inode *inode, struct file *file) { return seq_open_net(inode, file, &arp_seq_ops, sizeof(struct neigh_seq_state)); } static const struct file_operations arp_seq_fops = { .owner = THIS_MODULE, .open = arp_seq_open, .read = seq_read, .llseek = seq_lseek, .release = seq_release_net, }; static int __net_init arp_net_init(struct net *net) { if (!proc_net_fops_create(net, "arp", S_IRUGO, &arp_seq_fops)) return -ENOMEM; return 0; } static void __net_exit arp_net_exit(struct net *net) { proc_net_remove(net, "arp"); } static struct pernet_operations arp_net_ops = { .init = arp_net_init, .exit = arp_net_exit, }; static int __init arp_proc_init(void) { return register_pernet_subsys(&arp_net_ops); } #else /* CONFIG_PROC_FS */ static int __init arp_proc_init(void) { return 0; } #endif /* CONFIG_PROC_FS */