/* * SL811HS HCD (Host Controller Driver) for USB. * * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) * Copyright (C) 2004-2005 David Brownell * * Periodic scheduling is based on Roman's OHCI code * Copyright (C) 1999 Roman Weissgaerber * * The SL811HS controller handles host side USB (like the SL11H, but with * another register set and SOF generation) as well as peripheral side USB * (like the SL811S). This driver version doesn't implement the Gadget API * for the peripheral role; or OTG (that'd need much external circuitry). * * For documentation, see the SL811HS spec and the "SL811HS Embedded Host" * document (providing significant pieces missing from that spec); plus * the SL811S spec if you want peripheral side info. */ /* * Status: Passed basic stress testing, works with hubs, mice, keyboards, * and usb-storage. * * TODO: * - usb suspend/resume triggered by sl811 (with USB_SUSPEND) * - various issues noted in the code * - performance work; use both register banks; ... * - use urb->iso_frame_desc[] with ISO transfers */ #undef VERBOSE #undef PACKET_TRACE #include #ifdef CONFIG_USB_DEBUG # define DEBUG #else # undef DEBUG #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../core/hcd.h" #include "sl811.h" MODULE_DESCRIPTION("SL811HS USB Host Controller Driver"); MODULE_LICENSE("GPL"); #define DRIVER_VERSION "19 May 2005" #ifndef DEBUG # define STUB_DEBUG_FILE #endif /* for now, use only one transfer register bank */ #undef USE_B /* this doesn't understand urb->iso_frame_desc[], but if you had a driver * that just queued one ISO frame per URB then iso transfers "should" work * using the normal urb status fields. */ #define DISABLE_ISO // #define QUIRK2 #define QUIRK3 static const char hcd_name[] = "sl811-hcd"; /*-------------------------------------------------------------------------*/ static void port_power(struct sl811 *sl811, int is_on) { struct usb_hcd *hcd = sl811_to_hcd(sl811); /* hub is inactive unless the port is powered */ if (is_on) { if (sl811->port1 & (1 << USB_PORT_FEAT_POWER)) return; sl811->port1 = (1 << USB_PORT_FEAT_POWER); sl811->irq_enable = SL11H_INTMASK_INSRMV; hcd->self.controller->power.power_state = PMSG_ON; } else { sl811->port1 = 0; sl811->irq_enable = 0; hcd->state = HC_STATE_HALT; hcd->self.controller->power.power_state = PMSG_SUSPEND; } sl811->ctrl1 = 0; sl811_write(sl811, SL11H_IRQ_ENABLE, 0); sl811_write(sl811, SL11H_IRQ_STATUS, ~0); if (sl811->board && sl811->board->port_power) { /* switch VBUS, at 500mA unless hub power budget gets set */ DBG("power %s\n", is_on ? "on" : "off"); sl811->board->port_power(hcd->self.controller, is_on); } /* reset as thoroughly as we can */ if (sl811->board && sl811->board->reset) sl811->board->reset(hcd->self.controller); else { sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0); mdelay(20); } sl811_write(sl811, SL11H_IRQ_ENABLE, 0); sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); sl811_write(sl811, SL811HS_CTLREG2, SL811HS_CTL2_INIT); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); // if !is_on, put into lowpower mode now } /*-------------------------------------------------------------------------*/ /* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue, * and may start I/O. Endpoint queues are scanned during completion irq * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation. * * Using an external DMA engine to copy a packet at a time could work, * though setup/teardown costs may be too big to make it worthwhile. */ /* SETUP starts a new control request. Devices are not allowed to * STALL or NAK these; they must cancel any pending control requests. */ static void setup_packet( struct sl811 *sl811, struct sl811h_ep *ep, struct urb *urb, u8 bank, u8 control ) { u8 addr; u8 len; void __iomem *data_reg; addr = SL811HS_PACKET_BUF(bank == 0); len = sizeof(struct usb_ctrlrequest); data_reg = sl811->data_reg; sl811_write_buf(sl811, addr, urb->setup_packet, len); /* autoincrementing */ sl811_write(sl811, bank + SL11H_BUFADDRREG, addr); writeb(len, data_reg); writeb(SL_SETUP /* | ep->epnum */, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); /* always OUT/data0 */ ; sl811_write(sl811, bank + SL11H_HOSTCTLREG, control | SL11H_HCTLMASK_OUT); ep->length = 0; PACKET("SETUP qh%p\n", ep); } /* STATUS finishes control requests, often after IN or OUT data packets */ static void status_packet( struct sl811 *sl811, struct sl811h_ep *ep, struct urb *urb, u8 bank, u8 control ) { int do_out; void __iomem *data_reg; do_out = urb->transfer_buffer_length && usb_pipein(urb->pipe); data_reg = sl811->data_reg; /* autoincrementing */ sl811_write(sl811, bank + SL11H_BUFADDRREG, 0); writeb(0, data_reg); writeb((do_out ? SL_OUT : SL_IN) /* | ep->epnum */, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); /* always data1; sometimes IN */ control |= SL11H_HCTLMASK_TOGGLE; if (do_out) control |= SL11H_HCTLMASK_OUT; sl811_write(sl811, bank + SL11H_HOSTCTLREG, control); ep->length = 0; PACKET("STATUS%s/%s qh%p\n", ep->nak_count ? "/retry" : "", do_out ? "out" : "in", ep); } /* IN packets can be used with any type of endpoint. here we just * start the transfer, data from the peripheral may arrive later. * urb->iso_frame_desc is currently ignored here... */ static void in_packet( struct sl811 *sl811, struct sl811h_ep *ep, struct urb *urb, u8 bank, u8 control ) { u8 addr; u8 len; void __iomem *data_reg; /* avoid losing data on overflow */ len = ep->maxpacket; addr = SL811HS_PACKET_BUF(bank == 0); if (!(control & SL11H_HCTLMASK_ISOCH) && usb_gettoggle(urb->dev, ep->epnum, 0)) control |= SL11H_HCTLMASK_TOGGLE; data_reg = sl811->data_reg; /* autoincrementing */ sl811_write(sl811, bank + SL11H_BUFADDRREG, addr); writeb(len, data_reg); writeb(SL_IN | ep->epnum, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); sl811_write(sl811, bank + SL11H_HOSTCTLREG, control); ep->length = min((int)len, urb->transfer_buffer_length - urb->actual_length); PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "", !!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len); } /* OUT packets can be used with any type of endpoint. * urb->iso_frame_desc is currently ignored here... */ static void out_packet( struct sl811 *sl811, struct sl811h_ep *ep, struct urb *urb, u8 bank, u8 control ) { void *buf; u8 addr; u8 len; void __iomem *data_reg; buf = urb->transfer_buffer + urb->actual_length; prefetch(buf); len = min((int)ep->maxpacket, urb->transfer_buffer_length - urb->actual_length); if (!(control & SL11H_HCTLMASK_ISOCH) && usb_gettoggle(urb->dev, ep->epnum, 1)) control |= SL11H_HCTLMASK_TOGGLE; addr = SL811HS_PACKET_BUF(bank == 0); data_reg = sl811->data_reg; sl811_write_buf(sl811, addr, buf, len); /* autoincrementing */ sl811_write(sl811, bank + SL11H_BUFADDRREG, addr); writeb(len, data_reg); writeb(SL_OUT | ep->epnum, data_reg); writeb(usb_pipedevice(urb->pipe), data_reg); sl811_write(sl811, bank + SL11H_HOSTCTLREG, control | SL11H_HCTLMASK_OUT); ep->length = len; PACKET("OUT%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "", !!usb_gettoggle(urb->dev, ep->epnum, 1), ep, len); } /*-------------------------------------------------------------------------*/ /* caller updates on-chip enables later */ static inline void sofirq_on(struct sl811 *sl811) { if (sl811->irq_enable & SL11H_INTMASK_SOFINTR) return; VDBG("sof irq on\n"); sl811->irq_enable |= SL11H_INTMASK_SOFINTR; } static inline void sofirq_off(struct sl811 *sl811) { if (!(sl811->irq_enable & SL11H_INTMASK_SOFINTR)) return; VDBG("sof irq off\n"); sl811->irq_enable &= ~SL11H_INTMASK_SOFINTR; } /*-------------------------------------------------------------------------*/ /* pick the next endpoint for a transaction, and issue it. * frames start with periodic transfers (after whatever is pending * from the previous frame), and the rest of the time is async * transfers, scheduled round-robin. */ static struct sl811h_ep *start(struct sl811 *sl811, u8 bank) { struct sl811h_ep *ep; struct urb *urb; int fclock; u8 control; /* use endpoint at schedule head */ if (sl811->next_periodic) { ep = sl811->next_periodic; sl811->next_periodic = ep->next; } else { if (sl811->next_async) ep = sl811->next_async; else if (!list_empty(&sl811->async)) ep = container_of(sl811->async.next, struct sl811h_ep, schedule); else { /* could set up the first fullspeed periodic * transfer for the next frame ... */ return NULL; } #ifdef USE_B if ((bank && sl811->active_b == ep) || sl811->active_a == ep) return NULL; #endif if (ep->schedule.next == &sl811->async) sl811->next_async = NULL; else sl811->next_async = container_of(ep->schedule.next, struct sl811h_ep, schedule); } if (unlikely(list_empty(&ep->hep->urb_list))) { DBG("empty %p queue?\n", ep); return NULL; } urb = container_of(ep->hep->urb_list.next, struct urb, urb_list); control = ep->defctrl; /* if this frame doesn't have enough time left to transfer this * packet, wait till the next frame. too-simple algorithm... */ fclock = sl811_read(sl811, SL11H_SOFTMRREG) << 6; fclock -= 100; /* setup takes not much time */ if (urb->dev->speed == USB_SPEED_LOW) { if (control & SL11H_HCTLMASK_PREAMBLE) { /* also note erratum 1: some hubs won't work */ fclock -= 800; } fclock -= ep->maxpacket << 8; /* erratum 2: AFTERSOF only works for fullspeed */ if (fclock < 0) { if (ep->period) sl811->stat_overrun++; sofirq_on(sl811); return NULL; } } else { fclock -= 12000 / 19; /* 19 64byte packets/msec */ if (fclock < 0) { if (ep->period) sl811->stat_overrun++; control |= SL11H_HCTLMASK_AFTERSOF; /* throttle bulk/control irq noise */ } else if (ep->nak_count) control |= SL11H_HCTLMASK_AFTERSOF; } switch (ep->nextpid) { case USB_PID_IN: in_packet(sl811, ep, urb, bank, control); break; case USB_PID_OUT: out_packet(sl811, ep, urb, bank, control); break; case USB_PID_SETUP: setup_packet(sl811, ep, urb, bank, control); break; case USB_PID_ACK: /* for control status */ status_packet(sl811, ep, urb, bank, control); break; default: DBG("bad ep%p pid %02x\n", ep, ep->nextpid); ep = NULL; } return ep; } #define MIN_JIFFIES ((msecs_to_jiffies(2) > 1) ? msecs_to_jiffies(2) : 2) static inline void start_transfer(struct sl811 *sl811) { if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) return; if (sl811->active_a == NULL) { sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF)); if (sl811->active_a != NULL) sl811->jiffies_a = jiffies + MIN_JIFFIES; } #ifdef USE_B if (sl811->active_b == NULL) { sl811->active_b = start(sl811, SL811_EP_B(SL811_HOST_BUF)); if (sl811->active_b != NULL) sl811->jiffies_b = jiffies + MIN_JIFFIES; } #endif } static void finish_request( struct sl811 *sl811, struct sl811h_ep *ep, struct urb *urb, struct pt_regs *regs, int status ) __releases(sl811->lock) __acquires(sl811->lock) { unsigned i; if (usb_pipecontrol(urb->pipe)) ep->nextpid = USB_PID_SETUP; spin_lock(&urb->lock); if (urb->status == -EINPROGRESS) urb->status = status; urb->hcpriv = NULL; spin_unlock(&urb->lock); spin_unlock(&sl811->lock); usb_hcd_giveback_urb(sl811_to_hcd(sl811), urb, regs); spin_lock(&sl811->lock); /* leave active endpoints in the schedule */ if (!list_empty(&ep->hep->urb_list)) return; /* async deschedule? */ if (!list_empty(&ep->schedule)) { list_del_init(&ep->schedule); if (ep == sl811->next_async) sl811->next_async = NULL; return; } /* periodic deschedule */ DBG("deschedule qh%d/%p branch %d\n", ep->period, ep, ep->branch); for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) { struct sl811h_ep *temp; struct sl811h_ep **prev = &sl811->periodic[i]; while (*prev && ((temp = *prev) != ep)) prev = &temp->next; if (*prev) *prev = ep->next; sl811->load[i] -= ep->load; } ep->branch = PERIODIC_SIZE; sl811->periodic_count--; sl811_to_hcd(sl811)->self.bandwidth_allocated -= ep->load / ep->period; if (ep == sl811->next_periodic) sl811->next_periodic = ep->next; /* we might turn SOFs back on again for the async schedule */ if (sl811->periodic_count == 0) sofirq_off(sl811); } static void done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank, struct pt_regs *regs) { u8 status; struct urb *urb; int urbstat = -EINPROGRESS; if (unlikely(!ep)) return; status = sl811_read(sl811, bank + SL11H_PKTSTATREG); urb = container_of(ep->hep->urb_list.next, struct urb, urb_list); /* we can safely ignore NAKs */ if (status & SL11H_STATMASK_NAK) { // PACKET("...NAK_%02x qh%p\n", bank, ep); if (!ep->period) ep->nak_count++; ep->error_count = 0; /* ACK advances transfer, toggle, and maybe queue */ } else if (status & SL11H_STATMASK_ACK) { struct usb_device *udev = urb->dev; int len; unsigned char *buf; /* urb->iso_frame_desc is currently ignored here... */ ep->nak_count = ep->error_count = 0; switch (ep->nextpid) { case USB_PID_OUT: // PACKET("...ACK/out_%02x qh%p\n", bank, ep); urb->actual_length += ep->length; usb_dotoggle(udev, ep->epnum, 1); if (urb->actual_length == urb->transfer_buffer_length) { if (usb_pipecontrol(urb->pipe)) ep->nextpid = USB_PID_ACK; /* some bulk protocols terminate OUT transfers * by a short packet, using ZLPs not padding. */ else if (ep->length < ep->maxpacket || !(urb->transfer_flags & URB_ZERO_PACKET)) urbstat = 0; } break; case USB_PID_IN: // PACKET("...ACK/in_%02x qh%p\n", bank, ep); buf = urb->transfer_buffer + urb->actual_length; prefetchw(buf); len = ep->maxpacket - sl811_read(sl811, bank + SL11H_XFERCNTREG); if (len > ep->length) { len = ep->length; urb->status = -EOVERFLOW; } urb->actual_length += len; sl811_read_buf(sl811, SL811HS_PACKET_BUF(bank == 0), buf, len); usb_dotoggle(udev, ep->epnum, 0); if (urb->actual_length == urb->transfer_buffer_length) urbstat = 0; else if (len < ep->maxpacket) { if (urb->transfer_flags & URB_SHORT_NOT_OK) urbstat = -EREMOTEIO; else urbstat = 0; } if (usb_pipecontrol(urb->pipe) && (urbstat == -EREMOTEIO || urbstat == 0)) { /* NOTE if the status stage STALLs (why?), * this reports the wrong urb status. */ spin_lock(&urb->lock); if (urb->status == -EINPROGRESS) urb->status = urbstat; spin_unlock(&urb->lock); urb = NULL; ep->nextpid = USB_PID_ACK; } break; case USB_PID_SETUP: // PACKET("...ACK/setup_%02x qh%p\n", bank, ep); if (urb->transfer_buffer_length == urb->actual_length) ep->nextpid = USB_PID_ACK; else if (usb_pipeout(urb->pipe)) { usb_settoggle(udev, 0, 1, 1); ep->nextpid = USB_PID_OUT; } else { usb_settoggle(udev, 0, 0, 1); ep->nextpid = USB_PID_IN; } break; case USB_PID_ACK: // PACKET("...ACK/status_%02x qh%p\n", bank, ep); urbstat = 0; break; } /* STALL stops all transfers */ } else if (status & SL11H_STATMASK_STALL) { PACKET("...STALL_%02x qh%p\n", bank, ep); ep->nak_count = ep->error_count = 0; urbstat = -EPIPE; /* error? retry, until "3 strikes" */ } else if (++ep->error_count >= 3) { if (status & SL11H_STATMASK_TMOUT) urbstat = -ETIMEDOUT; else if (status & SL11H_STATMASK_OVF) urbstat = -EOVERFLOW; else urbstat = -EPROTO; ep->error_count = 0; PACKET("...3STRIKES_%02x %02x qh%p stat %d\n", bank, status, ep, urbstat); } if (urb && (urbstat != -EINPROGRESS || urb->status != -EINPROGRESS)) finish_request(sl811, ep, urb, regs, urbstat); } static inline u8 checkdone(struct sl811 *sl811) { u8 ctl; u8 irqstat = 0; if (sl811->active_a && time_before_eq(sl811->jiffies_a, jiffies)) { ctl = sl811_read(sl811, SL811_EP_A(SL11H_HOSTCTLREG)); if (ctl & SL11H_HCTLMASK_ARM) sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); DBG("%s DONE_A: ctrl %02x sts %02x\n", (ctl & SL11H_HCTLMASK_ARM) ? "timeout" : "lost", ctl, sl811_read(sl811, SL811_EP_A(SL11H_PKTSTATREG))); irqstat |= SL11H_INTMASK_DONE_A; } #ifdef USE_B if (sl811->active_b && time_before_eq(sl811->jiffies_b, jiffies)) { ctl = sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG)); if (ctl & SL11H_HCTLMASK_ARM) sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); DBG("%s DONE_B: ctrl %02x sts %02x\n", (ctl & SL11H_HCTLMASK_ARM) ? "timeout" : "lost", ctl, sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG))); irqstat |= SL11H_INTMASK_DONE_A; } #endif return irqstat; } static irqreturn_t sl811h_irq(struct usb_hcd *hcd, struct pt_regs *regs) { struct sl811 *sl811 = hcd_to_sl811(hcd); u8 irqstat; irqreturn_t ret = IRQ_NONE; unsigned retries = 5; spin_lock(&sl811->lock); retry: irqstat = sl811_read(sl811, SL11H_IRQ_STATUS) & ~SL11H_INTMASK_DP; if (irqstat) { sl811_write(sl811, SL11H_IRQ_STATUS, irqstat); irqstat &= sl811->irq_enable; } #ifdef QUIRK2 /* this may no longer be necessary ... */ if (irqstat == 0) { irqstat = checkdone(sl811); if (irqstat) sl811->stat_lost++; } #endif /* USB packets, not necessarily handled in the order they're * issued ... that's fine if they're different endpoints. */ if (irqstat & SL11H_INTMASK_DONE_A) { done(sl811, sl811->active_a, SL811_EP_A(SL811_HOST_BUF), regs); sl811->active_a = NULL; sl811->stat_a++; } #ifdef USE_B if (irqstat & SL11H_INTMASK_DONE_B) { done(sl811, sl811->active_b, SL811_EP_B(SL811_HOST_BUF), regs); sl811->active_b = NULL; sl811->stat_b++; } #endif if (irqstat & SL11H_INTMASK_SOFINTR) { unsigned index; index = sl811->frame++ % (PERIODIC_SIZE - 1); sl811->stat_sof++; /* be graceful about almost-inevitable periodic schedule * overruns: continue the previous frame's transfers iff * this one has nothing scheduled. */ if (sl811->next_periodic) { // ERR("overrun to slot %d\n", index); sl811->stat_overrun++; } if (sl811->periodic[index]) sl811->next_periodic = sl811->periodic[index]; } /* khubd manages debouncing and wakeup */ if (irqstat & SL11H_INTMASK_INSRMV) { sl811->stat_insrmv++; /* most stats are reset for each VBUS session */ sl811->stat_wake = 0; sl811->stat_sof = 0; sl811->stat_a = 0; sl811->stat_b = 0; sl811->stat_lost = 0; sl811->ctrl1 = 0; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); sl811->irq_enable = SL11H_INTMASK_INSRMV; sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); /* usbcore nukes other pending transactions on disconnect */ if (sl811->active_a) { sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_a, container_of(sl811->active_a ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_a = NULL; } #ifdef USE_B if (sl811->active_b) { sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_b, container_of(sl811->active_b ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_b = NULL; } #endif /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) | (1 << USB_PORT_FEAT_CONNECTION); } else if (irqstat & SL11H_INTMASK_RD) { if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) { DBG("wakeup\n"); sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND; sl811->stat_wake++; } else irqstat &= ~SL11H_INTMASK_RD; } if (irqstat) { if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)) start_transfer(sl811); ret = IRQ_HANDLED; if (retries--) goto retry; } if (sl811->periodic_count == 0 && list_empty(&sl811->async)) sofirq_off(sl811); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); spin_unlock(&sl811->lock); return ret; } /*-------------------------------------------------------------------------*/ /* usb 1.1 says max 90% of a frame is available for periodic transfers. * this driver doesn't promise that much since it's got to handle an * IRQ per packet; irq handling latencies also use up that time. * * NOTE: the periodic schedule is a sparse tree, with the load for * each branch minimized. see fig 3.5 in the OHCI spec for example. */ #define MAX_PERIODIC_LOAD 500 /* out of 1000 usec */ static int balance(struct sl811 *sl811, u16 period, u16 load) { int i, branch = -ENOSPC; /* search for the least loaded schedule branch of that period * which has enough bandwidth left unreserved. */ for (i = 0; i < period ; i++) { if (branch < 0 || sl811->load[branch] > sl811->load[i]) { int j; for (j = i; j < PERIODIC_SIZE; j += period) { if ((sl811->load[j] + load) > MAX_PERIODIC_LOAD) break; } if (j < PERIODIC_SIZE) continue; branch = i; } } return branch; } /*-------------------------------------------------------------------------*/ static int sl811h_urb_enqueue( struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, gfp_t mem_flags ) { struct sl811 *sl811 = hcd_to_sl811(hcd); struct usb_device *udev = urb->dev; unsigned int pipe = urb->pipe; int is_out = !usb_pipein(pipe); int type = usb_pipetype(pipe); int epnum = usb_pipeendpoint(pipe); struct sl811h_ep *ep = NULL; unsigned long flags; int i; int retval = 0; #ifdef DISABLE_ISO if (type == PIPE_ISOCHRONOUS) return -ENOSPC; #endif /* avoid all allocations within spinlocks */ if (!hep->hcpriv) ep = kzalloc(sizeof *ep, mem_flags); spin_lock_irqsave(&sl811->lock, flags); /* don't submit to a dead or disabled port */ if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)) || !HC_IS_RUNNING(hcd->state)) { retval = -ENODEV; kfree(ep); goto fail; } if (hep->hcpriv) { kfree(ep); ep = hep->hcpriv; } else if (!ep) { retval = -ENOMEM; goto fail; } else { INIT_LIST_HEAD(&ep->schedule); ep->udev = usb_get_dev(udev); ep->epnum = epnum; ep->maxpacket = usb_maxpacket(udev, urb->pipe, is_out); ep->defctrl = SL11H_HCTLMASK_ARM | SL11H_HCTLMASK_ENABLE; usb_settoggle(udev, epnum, is_out, 0); if (type == PIPE_CONTROL) ep->nextpid = USB_PID_SETUP; else if (is_out) ep->nextpid = USB_PID_OUT; else ep->nextpid = USB_PID_IN; if (ep->maxpacket > H_MAXPACKET) { /* iso packets up to 240 bytes could work... */ DBG("dev %d ep%d maxpacket %d\n", udev->devnum, epnum, ep->maxpacket); retval = -EINVAL; goto fail; } if (udev->speed == USB_SPEED_LOW) { /* send preamble for external hub? */ if (!(sl811->ctrl1 & SL11H_CTL1MASK_LSPD)) ep->defctrl |= SL11H_HCTLMASK_PREAMBLE; } switch (type) { case PIPE_ISOCHRONOUS: case PIPE_INTERRUPT: if (urb->interval > PERIODIC_SIZE) urb->interval = PERIODIC_SIZE; ep->period = urb->interval; ep->branch = PERIODIC_SIZE; if (type == PIPE_ISOCHRONOUS) ep->defctrl |= SL11H_HCTLMASK_ISOCH; ep->load = usb_calc_bus_time(udev->speed, !is_out, (type == PIPE_ISOCHRONOUS), usb_maxpacket(udev, pipe, is_out)) / 1000; break; } ep->hep = hep; hep->hcpriv = ep; } /* maybe put endpoint into schedule */ switch (type) { case PIPE_CONTROL: case PIPE_BULK: if (list_empty(&ep->schedule)) list_add_tail(&ep->schedule, &sl811->async); break; case PIPE_ISOCHRONOUS: case PIPE_INTERRUPT: urb->interval = ep->period; if (ep->branch < PERIODIC_SIZE) { /* NOTE: the phase is correct here, but the value * needs offsetting by the transfer queue depth. * All current drivers ignore start_frame, so this * is unlikely to ever matter... */ urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1)) + ep->branch; break; } retval = balance(sl811, ep->period, ep->load); if (retval < 0) goto fail; ep->branch = retval; retval = 0; urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1)) + ep->branch; /* sort each schedule branch by period (slow before fast) * to share the faster parts of the tree without needing * dummy/placeholder nodes */ DBG("schedule qh%d/%p branch %d\n", ep->period, ep, ep->branch); for (i = ep->branch; i < PERIODIC_SIZE; i += ep->period) { struct sl811h_ep **prev = &sl811->periodic[i]; struct sl811h_ep *here = *prev; while (here && ep != here) { if (ep->period > here->period) break; prev = &here->next; here = *prev; } if (ep != here) { ep->next = here; *prev = ep; } sl811->load[i] += ep->load; } sl811->periodic_count++; hcd->self.bandwidth_allocated += ep->load / ep->period; sofirq_on(sl811); } /* in case of unlink-during-submit */ spin_lock(&urb->lock); if (urb->status != -EINPROGRESS) { spin_unlock(&urb->lock); finish_request(sl811, ep, urb, NULL, 0); retval = 0; goto fail; } urb->hcpriv = hep; spin_unlock(&urb->lock); start_transfer(sl811); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); fail: spin_unlock_irqrestore(&sl811->lock, flags); return retval; } static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { struct sl811 *sl811 = hcd_to_sl811(hcd); struct usb_host_endpoint *hep; unsigned long flags; struct sl811h_ep *ep; int retval = 0; spin_lock_irqsave(&sl811->lock, flags); hep = urb->hcpriv; if (!hep) goto fail; ep = hep->hcpriv; if (ep) { /* finish right away if this urb can't be active ... * note that some drivers wrongly expect delays */ if (ep->hep->urb_list.next != &urb->urb_list) { /* not front of queue? never active */ /* for active transfers, we expect an IRQ */ } else if (sl811->active_a == ep) { if (time_before_eq(sl811->jiffies_a, jiffies)) { /* happens a lot with lowspeed?? */ DBG("giveup on DONE_A: ctrl %02x sts %02x\n", sl811_read(sl811, SL811_EP_A(SL11H_HOSTCTLREG)), sl811_read(sl811, SL811_EP_A(SL11H_PKTSTATREG))); sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); sl811->active_a = NULL; } else urb = NULL; #ifdef USE_B } else if (sl811->active_b == ep) { if (time_before_eq(sl811->jiffies_a, jiffies)) { /* happens a lot with lowspeed?? */ DBG("giveup on DONE_B: ctrl %02x sts %02x\n", sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG)), sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG))); sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); sl811->active_b = NULL; } else urb = NULL; #endif } else { /* front of queue for inactive endpoint */ } if (urb) finish_request(sl811, ep, urb, NULL, 0); else VDBG("dequeue, urb %p active %s; wait4irq\n", urb, (sl811->active_a == ep) ? "A" : "B"); } else fail: retval = -EINVAL; spin_unlock_irqrestore(&sl811->lock, flags); return retval; } static void sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) { struct sl811h_ep *ep = hep->hcpriv; if (!ep) return; /* assume we'd just wait for the irq */ if (!list_empty(&hep->urb_list)) msleep(3); if (!list_empty(&hep->urb_list)) WARN("ep %p not empty?\n", ep); usb_put_dev(ep->udev); kfree(ep); hep->hcpriv = NULL; } static int sl811h_get_frame(struct usb_hcd *hcd) { struct sl811 *sl811 = hcd_to_sl811(hcd); /* wrong except while periodic transfers are scheduled; * never matches the on-the-wire frame; * subject to overruns. */ return sl811->frame; } /*-------------------------------------------------------------------------*/ /* the virtual root hub timer IRQ checks for hub status */ static int sl811h_hub_status_data(struct usb_hcd *hcd, char *buf) { struct sl811 *sl811 = hcd_to_sl811(hcd); #ifdef QUIRK3 unsigned long flags; /* non-SMP HACK: use root hub timer as i/o watchdog * this seems essential when SOF IRQs aren't in use... */ local_irq_save(flags); if (!timer_pending(&sl811->timer)) { if (sl811h_irq( /* ~0, */ hcd, NULL) != IRQ_NONE) sl811->stat_lost++; } local_irq_restore(flags); #endif if (!(sl811->port1 & (0xffff << 16))) return 0; /* tell khubd port 1 changed */ *buf = (1 << 1); return 1; } static void sl811h_hub_descriptor ( struct sl811 *sl811, struct usb_hub_descriptor *desc ) { u16 temp = 0; desc->bDescriptorType = 0x29; desc->bHubContrCurrent = 0; desc->bNbrPorts = 1; desc->bDescLength = 9; /* per-port power switching (gang of one!), or none */ desc->bPwrOn2PwrGood = 0; if (sl811->board && sl811->board->port_power) { desc->bPwrOn2PwrGood = sl811->board->potpg; if (!desc->bPwrOn2PwrGood) desc->bPwrOn2PwrGood = 10; temp = 0x0001; } else temp = 0x0002; /* no overcurrent errors detection/handling */ temp |= 0x0010; desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp); /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ desc->bitmap[0] = 0 << 1; desc->bitmap[1] = ~0; } static void sl811h_timer(unsigned long _sl811) { struct sl811 *sl811 = (void *) _sl811; unsigned long flags; u8 irqstat; u8 signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE; const u32 mask = (1 << USB_PORT_FEAT_CONNECTION) | (1 << USB_PORT_FEAT_ENABLE) | (1 << USB_PORT_FEAT_LOWSPEED); spin_lock_irqsave(&sl811->lock, flags); /* stop special signaling */ sl811->ctrl1 &= ~SL11H_CTL1MASK_FORCE; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); udelay(3); irqstat = sl811_read(sl811, SL11H_IRQ_STATUS); switch (signaling) { case SL11H_CTL1MASK_SE0: DBG("end reset\n"); sl811->port1 = (1 << USB_PORT_FEAT_C_RESET) | (1 << USB_PORT_FEAT_POWER); sl811->ctrl1 = 0; /* don't wrongly ack RD */ if (irqstat & SL11H_INTMASK_INSRMV) irqstat &= ~SL11H_INTMASK_RD; break; case SL11H_CTL1MASK_K: DBG("end resume\n"); sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND); break; default: DBG("odd timer signaling: %02x\n", signaling); break; } sl811_write(sl811, SL11H_IRQ_STATUS, irqstat); if (irqstat & SL11H_INTMASK_RD) { /* usbcore nukes all pending transactions on disconnect */ if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) | (1 << USB_PORT_FEAT_C_ENABLE); sl811->port1 &= ~mask; sl811->irq_enable = SL11H_INTMASK_INSRMV; } else { sl811->port1 |= mask; if (irqstat & SL11H_INTMASK_DP) sl811->port1 &= ~(1 << USB_PORT_FEAT_LOWSPEED); sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD; } if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) { u8 ctrl2 = SL811HS_CTL2_INIT; sl811->irq_enable |= SL11H_INTMASK_DONE_A; #ifdef USE_B sl811->irq_enable |= SL11H_INTMASK_DONE_B; #endif if (sl811->port1 & (1 << USB_PORT_FEAT_LOWSPEED)) { sl811->ctrl1 |= SL11H_CTL1MASK_LSPD; ctrl2 |= SL811HS_CTL2MASK_DSWAP; } /* start SOFs flowing, kickstarting with A registers */ sl811->ctrl1 |= SL11H_CTL1MASK_SOF_ENA; sl811_write(sl811, SL11H_SOFLOWREG, 0xe0); sl811_write(sl811, SL811HS_CTLREG2, ctrl2); /* autoincrementing */ sl811_write(sl811, SL811_EP_A(SL11H_BUFLNTHREG), 0); writeb(SL_SOF, sl811->data_reg); writeb(0, sl811->data_reg); sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), SL11H_HCTLMASK_ARM); /* khubd provides debounce delay */ } else { sl811->ctrl1 = 0; } sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); /* reenable irqs */ sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); spin_unlock_irqrestore(&sl811->lock, flags); } static int sl811h_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength ) { struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; unsigned long flags; spin_lock_irqsave(&sl811->lock, flags); switch (typeReq) { case ClearHubFeature: case SetHubFeature: switch (wValue) { case C_HUB_OVER_CURRENT: case C_HUB_LOCAL_POWER: break; default: goto error; } break; case ClearPortFeature: if (wIndex != 1 || wLength != 0) goto error; switch (wValue) { case USB_PORT_FEAT_ENABLE: sl811->port1 &= (1 << USB_PORT_FEAT_POWER); sl811->ctrl1 = 0; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); sl811->irq_enable = SL11H_INTMASK_INSRMV; sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); break; case USB_PORT_FEAT_SUSPEND: if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))) break; /* 20 msec of resume/K signaling, other irqs blocked */ DBG("start resume...\n"); sl811->irq_enable = 0; sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); sl811->ctrl1 |= SL11H_CTL1MASK_K; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); mod_timer(&sl811->timer, jiffies + msecs_to_jiffies(20)); break; case USB_PORT_FEAT_POWER: port_power(sl811, 0); break; case USB_PORT_FEAT_C_ENABLE: case USB_PORT_FEAT_C_SUSPEND: case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_RESET: break; default: goto error; } sl811->port1 &= ~(1 << wValue); break; case GetHubDescriptor: sl811h_hub_descriptor(sl811, (struct usb_hub_descriptor *) buf); break; case GetHubStatus: *(__le32 *) buf = cpu_to_le32(0); break; case GetPortStatus: if (wIndex != 1) goto error; *(__le32 *) buf = cpu_to_le32(sl811->port1); #ifndef VERBOSE if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ #endif DBG("GetPortStatus %08x\n", sl811->port1); break; case SetPortFeature: if (wIndex != 1 || wLength != 0) goto error; switch (wValue) { case USB_PORT_FEAT_SUSPEND: if (sl811->port1 & (1 << USB_PORT_FEAT_RESET)) goto error; if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))) goto error; DBG("suspend...\n"); sl811->ctrl1 &= ~SL11H_CTL1MASK_SOF_ENA; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); break; case USB_PORT_FEAT_POWER: port_power(sl811, 1); break; case USB_PORT_FEAT_RESET: if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) goto error; if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER))) break; /* 50 msec of reset/SE0 signaling, irqs blocked */ sl811->irq_enable = 0; sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); sl811->ctrl1 = SL11H_CTL1MASK_SE0; sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); sl811->port1 |= (1 << USB_PORT_FEAT_RESET); mod_timer(&sl811->timer, jiffies + msecs_to_jiffies(50)); break; default: goto error; } sl811->port1 |= 1 << wValue; break; default: error: /* "protocol stall" on error */ retval = -EPIPE; } spin_unlock_irqrestore(&sl811->lock, flags); return retval; } #ifdef CONFIG_PM static int sl811h_hub_suspend(struct usb_hcd *hcd) { // SOFs off DBG("%s\n", __FUNCTION__); return 0; } static int sl811h_hub_resume(struct usb_hcd *hcd) { // SOFs on DBG("%s\n", __FUNCTION__); return 0; } #else #define sl811h_hub_suspend NULL #define sl811h_hub_resume NULL #endif /*-------------------------------------------------------------------------*/ #ifdef STUB_DEBUG_FILE static inline void create_debug_file(struct sl811 *sl811) { } static inline void remove_debug_file(struct sl811 *sl811) { } #else #include #include static void dump_irq(struct seq_file *s, char *label, u8 mask) { seq_printf(s, "%s %02x%s%s%s%s%s%s\n", label, mask, (mask & SL11H_INTMASK_DONE_A) ? " done_a" : "", (mask & SL11H_INTMASK_DONE_B) ? " done_b" : "", (mask & SL11H_INTMASK_SOFINTR) ? " sof" : "", (mask & SL11H_INTMASK_INSRMV) ? " ins/rmv" : "", (mask & SL11H_INTMASK_RD) ? " rd" : "", (mask & SL11H_INTMASK_DP) ? " dp" : ""); } static int proc_sl811h_show(struct seq_file *s, void *unused) { struct sl811 *sl811 = s->private; struct sl811h_ep *ep; unsigned i; seq_printf(s, "%s\n%s version %s\nportstatus[1] = %08x\n", sl811_to_hcd(sl811)->product_desc, hcd_name, DRIVER_VERSION, sl811->port1); seq_printf(s, "insert/remove: %ld\n", sl811->stat_insrmv); seq_printf(s, "current session: done_a %ld done_b %ld " "wake %ld sof %ld overrun %ld lost %ld\n\n", sl811->stat_a, sl811->stat_b, sl811->stat_wake, sl811->stat_sof, sl811->stat_overrun, sl811->stat_lost); spin_lock_irq(&sl811->lock); if (sl811->ctrl1 & SL11H_CTL1MASK_SUSPEND) seq_printf(s, "(suspended)\n\n"); else { u8 t = sl811_read(sl811, SL11H_CTLREG1); seq_printf(s, "ctrl1 %02x%s%s%s%s\n", t, (t & SL11H_CTL1MASK_SOF_ENA) ? " sofgen" : "", ({char *s; switch (t & SL11H_CTL1MASK_FORCE) { case SL11H_CTL1MASK_NORMAL: s = ""; break; case SL11H_CTL1MASK_SE0: s = " se0/reset"; break; case SL11H_CTL1MASK_K: s = " k/resume"; break; default: s = "j"; break; }; s; }), (t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "", (t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : ""); dump_irq(s, "irq_enable", sl811_read(sl811, SL11H_IRQ_ENABLE)); dump_irq(s, "irq_status", sl811_read(sl811, SL11H_IRQ_STATUS)); seq_printf(s, "frame clocks remaining: %d\n", sl811_read(sl811, SL11H_SOFTMRREG) << 6); } seq_printf(s, "A: qh%p ctl %02x sts %02x\n", sl811->active_a, sl811_read(sl811, SL811_EP_A(SL11H_HOSTCTLREG)), sl811_read(sl811, SL811_EP_A(SL11H_PKTSTATREG))); seq_printf(s, "B: qh%p ctl %02x sts %02x\n", sl811->active_b, sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG)), sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG))); seq_printf(s, "\n"); list_for_each_entry (ep, &sl811->async, schedule) { struct urb *urb; seq_printf(s, "%s%sqh%p, ep%d%s, maxpacket %d" " nak %d err %d\n", (ep == sl811->active_a) ? "(A) " : "", (ep == sl811->active_b) ? "(B) " : "", ep, ep->epnum, ({ char *s; switch (ep->nextpid) { case USB_PID_IN: s = "in"; break; case USB_PID_OUT: s = "out"; break; case USB_PID_SETUP: s = "setup"; break; case USB_PID_ACK: s = "status"; break; default: s = "?"; break; }; s;}), ep->maxpacket, ep->nak_count, ep->error_count); list_for_each_entry (urb, &ep->hep->urb_list, urb_list) { seq_printf(s, " urb%p, %d/%d\n", urb, urb->actual_length, urb->transfer_buffer_length); } } if (!list_empty(&sl811->async)) seq_printf(s, "\n"); seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE); for (i = 0; i < PERIODIC_SIZE; i++) { ep = sl811->periodic[i]; if (!ep) continue; seq_printf(s, "%2d [%3d]:\n", i, sl811->load[i]); /* DUMB: prints shared entries multiple times */ do { seq_printf(s, " %s%sqh%d/%p (%sdev%d ep%d%s max %d) " "err %d\n", (ep == sl811->active_a) ? "(A) " : "", (ep == sl811->active_b) ? "(B) " : "", ep->period, ep, (ep->udev->speed == USB_SPEED_FULL) ? "" : "ls ", ep->udev->devnum, ep->epnum, (ep->epnum == 0) ? "" : ((ep->nextpid == USB_PID_IN) ? "in" : "out"), ep->maxpacket, ep->error_count); ep = ep->next; } while (ep); } spin_unlock_irq(&sl811->lock); seq_printf(s, "\n"); return 0; } static int proc_sl811h_open(struct inode *inode, struct file *file) { return single_open(file, proc_sl811h_show, PDE(inode)->data); } static struct file_operations proc_ops = { .open = proc_sl811h_open, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; /* expect just one sl811 per system */ static const char proc_filename[] = "driver/sl811h"; static void create_debug_file(struct sl811 *sl811) { struct proc_dir_entry *pde; pde = create_proc_entry(proc_filename, 0, NULL); if (pde == NULL) return; pde->proc_fops = &proc_ops; pde->data = sl811; sl811->pde = pde; } static void remove_debug_file(struct sl811 *sl811) { if (sl811->pde) remove_proc_entry(proc_filename, NULL); } #endif /*-------------------------------------------------------------------------*/ static void sl811h_stop(struct usb_hcd *hcd) { struct sl811 *sl811 = hcd_to_sl811(hcd); unsigned long flags; del_timer_sync(&hcd->rh_timer); spin_lock_irqsave(&sl811->lock, flags); port_power(sl811, 0); spin_unlock_irqrestore(&sl811->lock, flags); } static int sl811h_start(struct usb_hcd *hcd) { struct sl811 *sl811 = hcd_to_sl811(hcd); /* chip has been reset, VBUS power is off */ hcd->state = HC_STATE_RUNNING; if (sl811->board) { hcd->can_wakeup = sl811->board->can_wakeup; hcd->power_budget = sl811->board->power * 2; } /* enable power and interupts */ port_power(sl811, 1); return 0; } /*-------------------------------------------------------------------------*/ static struct hc_driver sl811h_hc_driver = { .description = hcd_name, .hcd_priv_size = sizeof(struct sl811), /* * generic hardware linkage */ .irq = sl811h_irq, .flags = HCD_USB11 | HCD_MEMORY, /* Basic lifecycle operations */ .start = sl811h_start, .stop = sl811h_stop, /* * managing i/o requests and associated device resources */ .urb_enqueue = sl811h_urb_enqueue, .urb_dequeue = sl811h_urb_dequeue, .endpoint_disable = sl811h_endpoint_disable, /* * periodic schedule support */ .get_frame_number = sl811h_get_frame, /* * root hub support */ .hub_status_data = sl811h_hub_status_data, .hub_control = sl811h_hub_control, .hub_suspend = sl811h_hub_suspend, .hub_resume = sl811h_hub_resume, }; /*-------------------------------------------------------------------------*/ static int __devexit sl811h_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); struct platform_device *pdev; struct resource *res; pdev = container_of(dev, struct platform_device, dev); remove_debug_file(sl811); usb_remove_hcd(hcd); /* some platforms may use IORESOURCE_IO */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (res) iounmap(sl811->data_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res) iounmap(sl811->addr_reg); usb_put_hcd(hcd); return 0; } static int __devinit sl811h_probe(struct device *dev) { struct usb_hcd *hcd; struct sl811 *sl811; struct platform_device *pdev; struct resource *addr, *data; int irq; void __iomem *addr_reg; void __iomem *data_reg; int retval; u8 tmp, ioaddr = 0; /* basic sanity checks first. board-specific init logic should * have initialized these three resources and probably board * specific platform_data. we don't probe for IRQs, and do only * minimal sanity checking. */ pdev = container_of(dev, struct platform_device, dev); irq = platform_get_irq(pdev, 0); if (pdev->num_resources < 3 || irq < 0) return -ENODEV; /* refuse to confuse usbcore */ if (dev->dma_mask) { DBG("no we won't dma\n"); return -EINVAL; } /* the chip may be wired for either kind of addressing */ addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); data = platform_get_resource(pdev, IORESOURCE_MEM, 1); retval = -EBUSY; if (!addr || !data) { addr = platform_get_resource(pdev, IORESOURCE_IO, 0); data = platform_get_resource(pdev, IORESOURCE_IO, 1); if (!addr || !data) return -ENODEV; ioaddr = 1; addr_reg = (void __iomem *) addr->start; data_reg = (void __iomem *) data->start; } else { addr_reg = ioremap(addr->start, 1); if (addr_reg == NULL) { retval = -ENOMEM; goto err2; } data_reg = ioremap(data->start, 1); if (data_reg == NULL) { retval = -ENOMEM; goto err4; } } /* allocate and initialize hcd */ hcd = usb_create_hcd(&sl811h_hc_driver, dev, dev->bus_id); if (!hcd) { retval = -ENOMEM; goto err5; } hcd->rsrc_start = addr->start; sl811 = hcd_to_sl811(hcd); spin_lock_init(&sl811->lock); INIT_LIST_HEAD(&sl811->async); sl811->board = dev->platform_data; init_timer(&sl811->timer); sl811->timer.function = sl811h_timer; sl811->timer.data = (unsigned long) sl811; sl811->addr_reg = addr_reg; sl811->data_reg = data_reg; spin_lock_irq(&sl811->lock); port_power(sl811, 0); spin_unlock_irq(&sl811->lock); msleep(200); tmp = sl811_read(sl811, SL11H_HWREVREG); switch (tmp >> 4) { case 1: hcd->product_desc = "SL811HS v1.2"; break; case 2: hcd->product_desc = "SL811HS v1.5"; break; default: /* reject case 0, SL11S is less functional */ DBG("chiprev %02x\n", tmp); retval = -ENXIO; goto err6; } /* The chip's IRQ is level triggered, active high. A requirement * for platform device setup is to cope with things like signal * inverters (e.g. CF is active low) or working only with edge * triggers (e.g. most ARM CPUs). Initial driver stress testing * was on a system with single edge triggering, so most sorts of * triggering arrangement should work. */ retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ); if (retval != 0) goto err6; create_debug_file(sl811); return retval; err6: usb_put_hcd(hcd); err5: if (!ioaddr) iounmap(data_reg); err4: if (!ioaddr) iounmap(addr_reg); err2: DBG("init error, %d\n", retval); return retval; } #ifdef CONFIG_PM /* for this device there's no useful distinction between the controller * and its root hub, except that the root hub only gets direct PM calls * when CONFIG_USB_SUSPEND is enabled. */ static int sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; if (phase != SUSPEND_POWER_DOWN) return retval; if (state.event == PM_EVENT_FREEZE) retval = sl811h_hub_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) port_power(sl811, 0); if (retval == 0) dev->power.power_state = state; return retval; } static int sl811h_resume(struct device *dev, u32 phase) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); if (phase != RESUME_POWER_ON) return 0; /* with no "check to see if VBUS is still powered" board hook, * let's assume it'd only be powered to enable remote wakeup. */ if (dev->power.power_state.event == PM_EVENT_SUSPEND || !hcd->can_wakeup) { sl811->port1 = 0; port_power(sl811, 1); return 0; } dev->power.power_state = PMSG_ON; return sl811h_hub_resume(hcd); } #else #define sl811h_suspend NULL #define sl811h_resume NULL #endif /* this driver is exported so sl811_cs can depend on it */ struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, .probe = sl811h_probe, .remove = __devexit_p(sl811h_remove), .suspend = sl811h_suspend, .resume = sl811h_resume, }; EXPORT_SYMBOL(sl811h_driver); /*-------------------------------------------------------------------------*/ static int __init sl811h_init(void) { if (usb_disabled()) return -ENODEV; INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION); return driver_register(&sl811h_driver); } module_init(sl811h_init); static void __exit sl811h_cleanup(void) { driver_unregister(&sl811h_driver); } module_exit(sl811h_cleanup);