/* * probe.c - PCI detection and setup code */ #include #include #include #include #include #include #include #include #include #include "pci.h" #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ #define CARDBUS_RESERVE_BUSNR 3 struct resource busn_resource = { .name = "PCI busn", .start = 0, .end = 255, .flags = IORESOURCE_BUS, }; /* Ugh. Need to stop exporting this to modules. */ LIST_HEAD(pci_root_buses); EXPORT_SYMBOL(pci_root_buses); static LIST_HEAD(pci_domain_busn_res_list); struct pci_domain_busn_res { struct list_head list; struct resource res; int domain_nr; }; static struct resource *get_pci_domain_busn_res(int domain_nr) { struct pci_domain_busn_res *r; list_for_each_entry(r, &pci_domain_busn_res_list, list) if (r->domain_nr == domain_nr) return &r->res; r = kzalloc(sizeof(*r), GFP_KERNEL); if (!r) return NULL; r->domain_nr = domain_nr; r->res.start = 0; r->res.end = 0xff; r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED; list_add_tail(&r->list, &pci_domain_busn_res_list); return &r->res; } static int find_anything(struct device *dev, void *data) { return 1; } /* * Some device drivers need know if pci is initiated. * Basically, we think pci is not initiated when there * is no device to be found on the pci_bus_type. */ int no_pci_devices(void) { struct device *dev; int no_devices; dev = bus_find_device(&pci_bus_type, NULL, NULL, find_anything); no_devices = (dev == NULL); put_device(dev); return no_devices; } EXPORT_SYMBOL(no_pci_devices); /* * PCI Bus Class */ static void release_pcibus_dev(struct device *dev) { struct pci_bus *pci_bus = to_pci_bus(dev); if (pci_bus->bridge) put_device(pci_bus->bridge); pci_bus_remove_resources(pci_bus); pci_release_bus_of_node(pci_bus); kfree(pci_bus); } static struct class pcibus_class = { .name = "pci_bus", .dev_release = &release_pcibus_dev, .dev_attrs = pcibus_dev_attrs, }; static int __init pcibus_class_init(void) { return class_register(&pcibus_class); } postcore_initcall(pcibus_class_init); static u64 pci_size(u64 base, u64 maxbase, u64 mask) { u64 size = mask & maxbase; /* Find the significant bits */ if (!size) return 0; /* Get the lowest of them to find the decode size, and from that the extent. */ size = (size & ~(size-1)) - 1; /* base == maxbase can be valid only if the BAR has already been programmed with all 1s. */ if (base == maxbase && ((base | size) & mask) != mask) return 0; return size; } static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) { u32 mem_type; unsigned long flags; if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { flags = bar & ~PCI_BASE_ADDRESS_IO_MASK; flags |= IORESOURCE_IO; return flags; } flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK; flags |= IORESOURCE_MEM; if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH) flags |= IORESOURCE_PREFETCH; mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK; switch (mem_type) { case PCI_BASE_ADDRESS_MEM_TYPE_32: break; case PCI_BASE_ADDRESS_MEM_TYPE_1M: /* 1M mem BAR treated as 32-bit BAR */ break; case PCI_BASE_ADDRESS_MEM_TYPE_64: flags |= IORESOURCE_MEM_64; break; default: /* mem unknown type treated as 32-bit BAR */ break; } return flags; } /** * pci_read_base - read a PCI BAR * @dev: the PCI device * @type: type of the BAR * @res: resource buffer to be filled in * @pos: BAR position in the config space * * Returns 1 if the BAR is 64-bit, or 0 if 32-bit. */ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, struct resource *res, unsigned int pos) { u32 l, sz, mask; u16 orig_cmd; struct pci_bus_region region; bool bar_too_big = false, bar_disabled = false; mask = type ? PCI_ROM_ADDRESS_MASK : ~0; /* No printks while decoding is disabled! */ if (!dev->mmio_always_on) { pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); pci_write_config_word(dev, PCI_COMMAND, orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO)); } res->name = pci_name(dev); pci_read_config_dword(dev, pos, &l); pci_write_config_dword(dev, pos, l | mask); pci_read_config_dword(dev, pos, &sz); pci_write_config_dword(dev, pos, l); /* * All bits set in sz means the device isn't working properly. * If the BAR isn't implemented, all bits must be 0. If it's a * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit * 1 must be clear. */ if (!sz || sz == 0xffffffff) goto fail; /* * I don't know how l can have all bits set. Copied from old code. * Maybe it fixes a bug on some ancient platform. */ if (l == 0xffffffff) l = 0; if (type == pci_bar_unknown) { res->flags = decode_bar(dev, l); res->flags |= IORESOURCE_SIZEALIGN; if (res->flags & IORESOURCE_IO) { l &= PCI_BASE_ADDRESS_IO_MASK; mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT; } else { l &= PCI_BASE_ADDRESS_MEM_MASK; mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; } } else { res->flags |= (l & IORESOURCE_ROM_ENABLE); l &= PCI_ROM_ADDRESS_MASK; mask = (u32)PCI_ROM_ADDRESS_MASK; } if (res->flags & IORESOURCE_MEM_64) { u64 l64 = l; u64 sz64 = sz; u64 mask64 = mask | (u64)~0 << 32; pci_read_config_dword(dev, pos + 4, &l); pci_write_config_dword(dev, pos + 4, ~0); pci_read_config_dword(dev, pos + 4, &sz); pci_write_config_dword(dev, pos + 4, l); l64 |= ((u64)l << 32); sz64 |= ((u64)sz << 32); sz64 = pci_size(l64, sz64, mask64); if (!sz64) goto fail; if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) { bar_too_big = true; goto fail; } if ((sizeof(resource_size_t) < 8) && l) { /* Address above 32-bit boundary; disable the BAR */ pci_write_config_dword(dev, pos, 0); pci_write_config_dword(dev, pos + 4, 0); region.start = 0; region.end = sz64; pcibios_bus_to_resource(dev, res, ®ion); bar_disabled = true; } else { region.start = l64; region.end = l64 + sz64; pcibios_bus_to_resource(dev, res, ®ion); } } else { sz = pci_size(l, sz, mask); if (!sz) goto fail; region.start = l; region.end = l + sz; pcibios_bus_to_resource(dev, res, ®ion); } goto out; fail: res->flags = 0; out: if (!dev->mmio_always_on) pci_write_config_word(dev, PCI_COMMAND, orig_cmd); if (bar_too_big) dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos); if (res->flags && !bar_disabled) dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res); return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; } static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) { unsigned int pos, reg; for (pos = 0; pos < howmany; pos++) { struct resource *res = &dev->resource[pos]; reg = PCI_BASE_ADDRESS_0 + (pos << 2); pos += __pci_read_base(dev, pci_bar_unknown, res, reg); } if (rom) { struct resource *res = &dev->resource[PCI_ROM_RESOURCE]; dev->rom_base_reg = rom; res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_READONLY | IORESOURCE_CACHEABLE | IORESOURCE_SIZEALIGN; __pci_read_base(dev, pci_bar_mem32, res, rom); } } static void __devinit pci_read_bridge_io(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; unsigned long io_mask, io_granularity, base, limit; struct pci_bus_region region; struct resource *res; io_mask = PCI_IO_RANGE_MASK; io_granularity = 0x1000; if (dev->io_window_1k) { /* Support 1K I/O space granularity */ io_mask = PCI_IO_1K_RANGE_MASK; io_granularity = 0x400; } res = child->resource[0]; pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); base = (io_base_lo & io_mask) << 8; limit = (io_limit_lo & io_mask) << 8; if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { u16 io_base_hi, io_limit_hi; pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi); pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi); base |= ((unsigned long) io_base_hi << 16); limit |= ((unsigned long) io_limit_hi << 16); } if (base <= limit) { res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; region.start = base; region.end = limit + io_granularity - 1; pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } static void __devinit pci_read_bridge_mmio(struct pci_bus *child) { struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; struct pci_bus_region region; struct resource *res; res = child->resource[1]; pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; if (base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; region.start = base; region.end = limit + 0xfffff; pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) { struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; unsigned long base, limit; struct pci_bus_region region; struct resource *res; res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo); base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16; limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { u32 mem_base_hi, mem_limit_hi; pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi); pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi); /* * Some bridges set the base > limit by default, and some * (broken) BIOSes do not initialize them. If we find * this, just assume they are not being used. */ if (mem_base_hi <= mem_limit_hi) { #if BITS_PER_LONG == 64 base |= ((unsigned long) mem_base_hi) << 32; limit |= ((unsigned long) mem_limit_hi) << 32; #else if (mem_base_hi || mem_limit_hi) { dev_err(&dev->dev, "can't handle 64-bit " "address space for bridge\n"); return; } #endif } } if (base <= limit) { res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; if (res->flags & PCI_PREF_RANGE_TYPE_64) res->flags |= IORESOURCE_MEM_64; region.start = base; region.end = limit + 0xfffff; pcibios_bus_to_resource(dev, res, ®ion); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res); } } void __devinit pci_read_bridge_bases(struct pci_bus *child) { struct pci_dev *dev = child->self; struct resource *res; int i; if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ return; dev_info(&dev->dev, "PCI bridge to %pR%s\n", &child->busn_res, dev->transparent ? " (subtractive decode)" : ""); pci_bus_remove_resources(child); for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; pci_read_bridge_io(child); pci_read_bridge_mmio(child); pci_read_bridge_mmio_pref(child); if (dev->transparent) { pci_bus_for_each_resource(child->parent, res, i) { if (res) { pci_bus_add_resource(child, res, PCI_SUBTRACTIVE_DECODE); dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR (subtractive decode)\n", res); } } } } static struct pci_bus * pci_alloc_bus(void) { struct pci_bus *b; b = kzalloc(sizeof(*b), GFP_KERNEL); if (b) { INIT_LIST_HEAD(&b->node); INIT_LIST_HEAD(&b->children); INIT_LIST_HEAD(&b->devices); INIT_LIST_HEAD(&b->slots); INIT_LIST_HEAD(&b->resources); b->max_bus_speed = PCI_SPEED_UNKNOWN; b->cur_bus_speed = PCI_SPEED_UNKNOWN; } return b; } static struct pci_host_bridge *pci_alloc_host_bridge(struct pci_bus *b) { struct pci_host_bridge *bridge; bridge = kzalloc(sizeof(*bridge), GFP_KERNEL); if (bridge) { INIT_LIST_HEAD(&bridge->windows); bridge->bus = b; } return bridge; } static unsigned char pcix_bus_speed[] = { PCI_SPEED_UNKNOWN, /* 0 */ PCI_SPEED_66MHz_PCIX, /* 1 */ PCI_SPEED_100MHz_PCIX, /* 2 */ PCI_SPEED_133MHz_PCIX, /* 3 */ PCI_SPEED_UNKNOWN, /* 4 */ PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ PCI_SPEED_UNKNOWN, /* 8 */ PCI_SPEED_66MHz_PCIX_266, /* 9 */ PCI_SPEED_100MHz_PCIX_266, /* A */ PCI_SPEED_133MHz_PCIX_266, /* B */ PCI_SPEED_UNKNOWN, /* C */ PCI_SPEED_66MHz_PCIX_533, /* D */ PCI_SPEED_100MHz_PCIX_533, /* E */ PCI_SPEED_133MHz_PCIX_533 /* F */ }; static unsigned char pcie_link_speed[] = { PCI_SPEED_UNKNOWN, /* 0 */ PCIE_SPEED_2_5GT, /* 1 */ PCIE_SPEED_5_0GT, /* 2 */ PCIE_SPEED_8_0GT, /* 3 */ PCI_SPEED_UNKNOWN, /* 4 */ PCI_SPEED_UNKNOWN, /* 5 */ PCI_SPEED_UNKNOWN, /* 6 */ PCI_SPEED_UNKNOWN, /* 7 */ PCI_SPEED_UNKNOWN, /* 8 */ PCI_SPEED_UNKNOWN, /* 9 */ PCI_SPEED_UNKNOWN, /* A */ PCI_SPEED_UNKNOWN, /* B */ PCI_SPEED_UNKNOWN, /* C */ PCI_SPEED_UNKNOWN, /* D */ PCI_SPEED_UNKNOWN, /* E */ PCI_SPEED_UNKNOWN /* F */ }; void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) { bus->cur_bus_speed = pcie_link_speed[linksta & 0xf]; } EXPORT_SYMBOL_GPL(pcie_update_link_speed); static unsigned char agp_speeds[] = { AGP_UNKNOWN, AGP_1X, AGP_2X, AGP_4X, AGP_8X }; static enum pci_bus_speed agp_speed(int agp3, int agpstat) { int index = 0; if (agpstat & 4) index = 3; else if (agpstat & 2) index = 2; else if (agpstat & 1) index = 1; else goto out; if (agp3) { index += 2; if (index == 5) index = 0; } out: return agp_speeds[index]; } static void pci_set_bus_speed(struct pci_bus *bus) { struct pci_dev *bridge = bus->self; int pos; pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); if (!pos) pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); if (pos) { u32 agpstat, agpcmd; pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); } pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); if (pos) { u16 status; enum pci_bus_speed max; pci_read_config_word(bridge, pos + 2, &status); if (status & 0x8000) { max = PCI_SPEED_133MHz_PCIX_533; } else if (status & 0x4000) { max = PCI_SPEED_133MHz_PCIX_266; } else if (status & 0x0002) { if (((status >> 12) & 0x3) == 2) { max = PCI_SPEED_133MHz_PCIX_ECC; } else { max = PCI_SPEED_133MHz_PCIX; } } else { max = PCI_SPEED_66MHz_PCIX; } bus->max_bus_speed = max; bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf]; return; } pos = pci_find_capability(bridge, PCI_CAP_ID_EXP); if (pos) { u32 linkcap; u16 linksta; pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap); bus->max_bus_speed = pcie_link_speed[linkcap & 0xf]; pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta); pcie_update_link_speed(bus, linksta); } } static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, struct pci_dev *bridge, int busnr) { struct pci_bus *child; int i; /* * Allocate a new bus, and inherit stuff from the parent.. */ child = pci_alloc_bus(); if (!child) return NULL; child->parent = parent; child->ops = parent->ops; child->sysdata = parent->sysdata; child->bus_flags = parent->bus_flags; /* initialize some portions of the bus device, but don't register it * now as the parent is not properly set up yet. This device will get * registered later in pci_bus_add_devices() */ child->dev.class = &pcibus_class; dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr); /* * Set up the primary, secondary and subordinate * bus numbers. */ child->number = child->busn_res.start = busnr; child->primary = parent->busn_res.start; child->busn_res.end = 0xff; if (!bridge) return child; child->self = bridge; child->bridge = get_device(&bridge->dev); pci_set_bus_of_node(child); pci_set_bus_speed(child); /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; child->resource[i]->name = child->name; } bridge->subordinate = child; return child; } struct pci_bus *__ref pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr) { struct pci_bus *child; child = pci_alloc_child_bus(parent, dev, busnr); if (child) { down_write(&pci_bus_sem); list_add_tail(&child->node, &parent->children); up_write(&pci_bus_sem); } return child; } static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max) { struct pci_bus *parent = child->parent; /* Attempts to fix that up are really dangerous unless we're going to re-assign all bus numbers. */ if (!pcibios_assign_all_busses()) return; while (parent->parent && parent->busn_res.end < max) { parent->busn_res.end = max; pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max); parent = parent->parent; } } /* * If it's a bridge, configure it and scan the bus behind it. * For CardBus bridges, we don't scan behind as the devices will * be handled by the bridge driver itself. * * We need to process bridges in two passes -- first we scan those * already configured by the BIOS and after we are done with all of * them, we proceed to assigning numbers to the remaining buses in * order to avoid overlaps between old and new bus numbers. */ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) { struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); u32 buses, i, j = 0; u16 bctl; u8 primary, secondary, subordinate; int broken = 0; pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); primary = buses & 0xFF; secondary = (buses >> 8) & 0xFF; subordinate = (buses >> 16) & 0xFF; dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", secondary, subordinate, pass); if (!primary && (primary != bus->number) && secondary && subordinate) { dev_warn(&dev->dev, "Primary bus is hard wired to 0\n"); primary = bus->number; } /* Check if setup is sensible at all */ if (!pass && (primary != bus->number || secondary <= bus->number)) { dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n"); broken = 1; } /* Disable MasterAbortMode during probing to avoid reporting of bus errors (in some architectures) */ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); if ((secondary || subordinate) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { unsigned int cmax; /* * Bus already configured by firmware, process it in the first * pass and just note the configuration. */ if (pass) goto out; /* * If we already got to this bus through a different bridge, * don't re-add it. This can happen with the i450NX chipset. * * However, we continue to descend down the hierarchy and * scan remaining child buses. */ child = pci_find_bus(pci_domain_nr(bus), secondary); if (!child) { child = pci_add_new_bus(bus, dev, secondary); if (!child) goto out; child->primary = primary; pci_bus_insert_busn_res(child, secondary, subordinate); child->bridge_ctl = bctl; } cmax = pci_scan_child_bus(child); if (cmax > max) max = cmax; if (child->busn_res.end > max) max = child->busn_res.end; } else { /* * We need to assign a number to this bus which we always * do in the second pass. */ if (!pass) { if (pcibios_assign_all_busses() || broken) /* Temporarily disable forwarding of the configuration cycles on all bridges in this bus segment to avoid possible conflicts in the second pass between two bridges programmed with overlapping bus ranges. */ pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses & ~0xffffff); goto out; } /* Clear errors */ pci_write_config_word(dev, PCI_STATUS, 0xffff); /* Prevent assigning a bus number that already exists. * This can happen when a bridge is hot-plugged, so in * this case we only re-scan this bus. */ child = pci_find_bus(pci_domain_nr(bus), max+1); if (!child) { child = pci_add_new_bus(bus, dev, ++max); if (!child) goto out; pci_bus_insert_busn_res(child, max, 0xff); } buses = (buses & 0xff000000) | ((unsigned int)(child->primary) << 0) | ((unsigned int)(child->busn_res.start) << 8) | ((unsigned int)(child->busn_res.end) << 16); /* * yenta.c forces a secondary latency timer of 176. * Copy that behaviour here. */ if (is_cardbus) { buses &= ~0xff000000; buses |= CARDBUS_LATENCY_TIMER << 24; } /* * We need to blast all three values with a single write. */ pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses); if (!is_cardbus) { child->bridge_ctl = bctl; /* * Adjust subordinate busnr in parent buses. * We do this before scanning for children because * some devices may not be detected if the bios * was lazy. */ pci_fixup_parent_subordinate_busnr(child, max); /* Now we can scan all subordinate buses... */ max = pci_scan_child_bus(child); /* * now fix it up again since we have found * the real value of max. */ pci_fixup_parent_subordinate_busnr(child, max); } else { /* * For CardBus bridges, we leave 4 bus numbers * as cards with a PCI-to-PCI bridge can be * inserted later. */ for (i=0; iparent) { if ((!pcibios_assign_all_busses()) && (parent->busn_res.end > max) && (parent->busn_res.end <= max+i)) { j = 1; } parent = parent->parent; } if (j) { /* * Often, there are two cardbus bridges * -- try to leave one valid bus number * for each one. */ i /= 2; break; } } max += i; pci_fixup_parent_subordinate_busnr(child, max); } /* * Set the subordinate bus number to its real value. */ pci_bus_update_busn_res_end(child, max); pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); } sprintf(child->name, (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"), pci_domain_nr(bus), child->number); /* Has only triggered on CardBus, fixup is in yenta_socket */ while (bus->parent) { if ((child->busn_res.end > bus->busn_res.end) || (child->number > bus->busn_res.end) || (child->number < bus->number) || (child->busn_res.end < bus->number)) { dev_info(&child->dev, "%pR %s " "hidden behind%s bridge %s %pR\n", &child->busn_res, (bus->number > child->busn_res.end && bus->busn_res.end < child->number) ? "wholly" : "partially", bus->self->transparent ? " transparent" : "", dev_name(&bus->dev), &bus->busn_res); } bus = bus->parent; } out: pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); return max; } /* * Read interrupt line and base address registers. * The architecture-dependent code can tweak these, of course. */ static void pci_read_irq(struct pci_dev *dev) { unsigned char irq; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq); dev->pin = irq; if (irq) pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); dev->irq = irq; } void set_pcie_port_type(struct pci_dev *pdev) { int pos; u16 reg16; pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!pos) return; pdev->is_pcie = 1; pdev->pcie_cap = pos; pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); pdev->pcie_flags_reg = reg16; pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; } void set_pcie_hotplug_bridge(struct pci_dev *pdev) { u32 reg32; pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32); if (reg32 & PCI_EXP_SLTCAP_HPC) pdev->is_hotplug_bridge = 1; } #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED) /** * pci_setup_device - fill in class and map information of a device * @dev: the device structure to fill * * Initialize the device structure with information about the device's * vendor,class,memory and IO-space addresses,IRQ lines etc. * Called at initialisation of the PCI subsystem and by CardBus services. * Returns 0 on success and negative if unknown type of device (not normal, * bridge or CardBus). */ int pci_setup_device(struct pci_dev *dev) { u32 class; u8 hdr_type; struct pci_slot *slot; int pos = 0; struct pci_bus_region region; struct resource *res; if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type)) return -EIO; dev->sysdata = dev->bus->sysdata; dev->dev.parent = dev->bus->bridge; dev->dev.bus = &pci_bus_type; dev->hdr_type = hdr_type & 0x7f; dev->multifunction = !!(hdr_type & 0x80); dev->error_state = pci_channel_io_normal; set_pcie_port_type(dev); list_for_each_entry(slot, &dev->bus->slots, list) if (PCI_SLOT(dev->devfn) == slot->number) dev->slot = slot; /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer) set this higher, assuming the system even supports it. */ dev->dma_mask = 0xffffffff; dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->revision = class & 0xff; dev->class = class >> 8; /* upper 3 bytes */ dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %02x class %#08x\n", dev->vendor, dev->device, dev->hdr_type, dev->class); /* need to have dev->class ready */ dev->cfg_size = pci_cfg_space_size(dev); /* "Unknown power state" */ dev->current_state = PCI_UNKNOWN; /* Early fixups, before probing the BARs */ pci_fixup_device(pci_fixup_early, dev); /* device class may be changed after fixup */ class = dev->class >> 8; switch (dev->hdr_type) { /* header type */ case PCI_HEADER_TYPE_NORMAL: /* standard header */ if (class == PCI_CLASS_BRIDGE_PCI) goto bad; pci_read_irq(dev); pci_read_bases(dev, 6, PCI_ROM_ADDRESS); pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device); /* * Do the ugly legacy mode stuff here rather than broken chip * quirk code. Legacy mode ATA controllers have fixed * addresses. These are not always echoed in BAR0-3, and * BAR0-3 in a few cases contain junk! */ if (class == PCI_CLASS_STORAGE_IDE) { u8 progif; pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 1) == 0) { region.start = 0x1F0; region.end = 0x1F7; res = &dev->resource[0]; res->flags = LEGACY_IO_RESOURCE; pcibios_bus_to_resource(dev, res, ®ion); region.start = 0x3F6; region.end = 0x3F6; res = &dev->resource[1]; res->flags = LEGACY_IO_RESOURCE; pcibios_bus_to_resource(dev, res, ®ion); } if ((progif & 4) == 0) { region.start = 0x170; region.end = 0x177; res = &dev->resource[2]; res->flags = LEGACY_IO_RESOURCE; pcibios_bus_to_resource(dev, res, ®ion); region.start = 0x376; region.end = 0x376; res = &dev->resource[3]; res->flags = LEGACY_IO_RESOURCE; pcibios_bus_to_resource(dev, res, ®ion); } } break; case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ if (class != PCI_CLASS_BRIDGE_PCI) goto bad; /* The PCI-to-PCI bridge spec requires that subtractive decoding (i.e. transparent) bridge must have programming interface code of 0x01. */ pci_read_irq(dev); dev->transparent = ((dev->class & 0xff) == 1); pci_read_bases(dev, 2, PCI_ROM_ADDRESS1); set_pcie_hotplug_bridge(dev); pos = pci_find_capability(dev, PCI_CAP_ID_SSVID); if (pos) { pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device); } break; case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */ if (class != PCI_CLASS_BRIDGE_CARDBUS) goto bad; pci_read_irq(dev); pci_read_bases(dev, 1, 0); pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device); break; default: /* unknown header */ dev_err(&dev->dev, "unknown header type %02x, " "ignoring device\n", dev->hdr_type); return -EIO; bad: dev_err(&dev->dev, "ignoring class %#08x (doesn't match header " "type %02x)\n", dev->class, dev->hdr_type); dev->class = PCI_CLASS_NOT_DEFINED; } /* We found a fine healthy device, go go go... */ return 0; } static void pci_release_capabilities(struct pci_dev *dev) { pci_vpd_release(dev); pci_iov_release(dev); pci_free_cap_save_buffers(dev); } /** * pci_release_dev - free a pci device structure when all users of it are finished. * @dev: device that's been disconnected * * Will be called only by the device core when all users of this pci device are * done. */ static void pci_release_dev(struct device *dev) { struct pci_dev *pci_dev; pci_dev = to_pci_dev(dev); pci_release_capabilities(pci_dev); pci_release_of_node(pci_dev); kfree(pci_dev); } /** * pci_cfg_space_size - get the configuration space size of the PCI device. * @dev: PCI device * * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices * have 4096 bytes. Even if the device is capable, that doesn't mean we can * access it. Maybe we don't have a way to generate extended config space * accesses, or the device is behind a reverse Express bridge. So we try * reading the dword at 0x100 which must either be 0 or a valid extended * capability header. */ int pci_cfg_space_size_ext(struct pci_dev *dev) { u32 status; int pos = PCI_CFG_SPACE_SIZE; if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL) goto fail; if (status == 0xffffffff) goto fail; return PCI_CFG_SPACE_EXP_SIZE; fail: return PCI_CFG_SPACE_SIZE; } int pci_cfg_space_size(struct pci_dev *dev) { int pos; u32 status; u16 class; class = dev->class >> 8; if (class == PCI_CLASS_BRIDGE_HOST) return pci_cfg_space_size_ext(dev); if (!pci_is_pcie(dev)) { pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (!pos) goto fail; pci_read_config_dword(dev, pos + PCI_X_STATUS, &status); if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))) goto fail; } return pci_cfg_space_size_ext(dev); fail: return PCI_CFG_SPACE_SIZE; } static void pci_release_bus_bridge_dev(struct device *dev) { struct pci_host_bridge *bridge = to_pci_host_bridge(dev); if (bridge->release_fn) bridge->release_fn(bridge); pci_free_resource_list(&bridge->windows); kfree(bridge); } struct pci_dev *alloc_pci_dev(void) { struct pci_dev *dev; dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); if (!dev) return NULL; INIT_LIST_HEAD(&dev->bus_list); return dev; } EXPORT_SYMBOL(alloc_pci_dev); bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, int crs_timeout) { int delay = 1; if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) return false; /* some broken boards return 0 or ~0 if a slot is empty: */ if (*l == 0xffffffff || *l == 0x00000000 || *l == 0x0000ffff || *l == 0xffff0000) return false; /* Configuration request Retry Status */ while (*l == 0xffff0001) { if (!crs_timeout) return false; msleep(delay); delay *= 2; if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) return false; /* Card hasn't responded in 60 seconds? Must be stuck. */ if (delay > crs_timeout) { printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not " "responding\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); return false; } } return true; } EXPORT_SYMBOL(pci_bus_read_dev_vendor_id); /* * Read the config data for a PCI device, sanity-check it * and fill in the dev structure... */ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) { struct pci_dev *dev; u32 l; if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000)) return NULL; dev = alloc_pci_dev(); if (!dev) return NULL; dev->bus = bus; dev->devfn = devfn; dev->vendor = l & 0xffff; dev->device = (l >> 16) & 0xffff; pci_set_of_node(dev); if (pci_setup_device(dev)) { kfree(dev); return NULL; } return dev; } static void pci_init_capabilities(struct pci_dev *dev) { /* MSI/MSI-X list */ pci_msi_init_pci_dev(dev); /* Buffers for saving PCIe and PCI-X capabilities */ pci_allocate_cap_save_buffers(dev); /* Power Management */ pci_pm_init(dev); platform_pci_wakeup_init(dev); /* Vital Product Data */ pci_vpd_pci22_init(dev); /* Alternative Routing-ID Forwarding */ pci_enable_ari(dev); /* Single Root I/O Virtualization */ pci_iov_init(dev); /* Enable ACS P2P upstream forwarding */ pci_enable_acs(dev); } void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) { device_initialize(&dev->dev); dev->dev.release = pci_release_dev; pci_dev_get(dev); dev->dev.dma_mask = &dev->dma_mask; dev->dev.dma_parms = &dev->dma_parms; dev->dev.coherent_dma_mask = 0xffffffffull; pci_set_dma_max_seg_size(dev, 65536); pci_set_dma_seg_boundary(dev, 0xffffffff); /* Fix up broken headers */ pci_fixup_device(pci_fixup_header, dev); /* moved out from quirk header fixup code */ pci_reassigndev_resource_alignment(dev); /* Clear the state_saved flag. */ dev->state_saved = false; /* Initialize various capabilities */ pci_init_capabilities(dev); /* * Add the device to our list of discovered devices * and the bus list for fixup functions, etc. */ down_write(&pci_bus_sem); list_add_tail(&dev->bus_list, &bus->devices); up_write(&pci_bus_sem); } struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn) { struct pci_dev *dev; dev = pci_get_slot(bus, devfn); if (dev) { pci_dev_put(dev); return dev; } dev = pci_scan_device(bus, devfn); if (!dev) return NULL; pci_device_add(dev, bus); return dev; } EXPORT_SYMBOL(pci_scan_single_device); static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn) { u16 cap; unsigned pos, next_fn; if (!dev) return 0; pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); if (!pos) return 0; pci_read_config_word(dev, pos + 4, &cap); next_fn = cap >> 8; if (next_fn <= fn) return 0; return next_fn; } static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn) { return (fn + 1) % 8; } static unsigned no_next_fn(struct pci_dev *dev, unsigned fn) { return 0; } static int only_one_child(struct pci_bus *bus) { struct pci_dev *parent = bus->self; if (!parent || !pci_is_pcie(parent)) return 0; if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT) return 1; if (pci_pcie_type(parent) == PCI_EXP_TYPE_DOWNSTREAM && !pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) return 1; return 0; } /** * pci_scan_slot - scan a PCI slot on a bus for devices. * @bus: PCI bus to scan * @devfn: slot number to scan (must have zero function.) * * Scan a PCI slot on the specified PCI bus for devices, adding * discovered devices to the @bus->devices list. New devices * will not have is_added set. * * Returns the number of new devices found. */ int pci_scan_slot(struct pci_bus *bus, int devfn) { unsigned fn, nr = 0; struct pci_dev *dev; unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn; if (only_one_child(bus) && (devfn > 0)) return 0; /* Already scanned the entire slot */ dev = pci_scan_single_device(bus, devfn); if (!dev) return 0; if (!dev->is_added) nr++; if (pci_ari_enabled(bus)) next_fn = next_ari_fn; else if (dev->multifunction) next_fn = next_trad_fn; for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) { dev = pci_scan_single_device(bus, devfn + fn); if (dev) { if (!dev->is_added) nr++; dev->multifunction = 1; } } /* only one slot has pcie device */ if (bus->self && nr) pcie_aspm_init_link_state(bus->self); return nr; } static int pcie_find_smpss(struct pci_dev *dev, void *data) { u8 *smpss = data; if (!pci_is_pcie(dev)) return 0; /* For PCIE hotplug enabled slots not connected directly to a * PCI-E root port, there can be problems when hotplugging * devices. This is due to the possibility of hotplugging a * device into the fabric with a smaller MPS that the devices * currently running have configured. Modifying the MPS on the * running devices could cause a fatal bus error due to an * incoming frame being larger than the newly configured MPS. * To work around this, the MPS for the entire fabric must be * set to the minimum size. Any devices hotplugged into this * fabric will have the minimum MPS set. If the PCI hotplug * slot is directly connected to the root port and there are not * other devices on the fabric (which seems to be the most * common case), then this is not an issue and MPS discovery * will occur as normal. */ if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) || (dev->bus->self && pci_pcie_type(dev->bus->self) != PCI_EXP_TYPE_ROOT_PORT))) *smpss = 0; if (*smpss > dev->pcie_mpss) *smpss = dev->pcie_mpss; return 0; } static void pcie_write_mps(struct pci_dev *dev, int mps) { int rc; if (pcie_bus_config == PCIE_BUS_PERFORMANCE) { mps = 128 << dev->pcie_mpss; if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT && dev->bus->self) /* For "Performance", the assumption is made that * downstream communication will never be larger than * the MRRS. So, the MPS only needs to be configured * for the upstream communication. This being the case, * walk from the top down and set the MPS of the child * to that of the parent bus. * * Configure the device MPS with the smaller of the * device MPSS or the bridge MPS (which is assumed to be * properly configured at this point to the largest * allowable MPS based on its parent bus). */ mps = min(mps, pcie_get_mps(dev->bus->self)); } rc = pcie_set_mps(dev, mps); if (rc) dev_err(&dev->dev, "Failed attempting to set the MPS\n"); } static void pcie_write_mrrs(struct pci_dev *dev) { int rc, mrrs; /* In the "safe" case, do not configure the MRRS. There appear to be * issues with setting MRRS to 0 on a number of devices. */ if (pcie_bus_config != PCIE_BUS_PERFORMANCE) return; /* For Max performance, the MRRS must be set to the largest supported * value. However, it cannot be configured larger than the MPS the * device or the bus can support. This should already be properly * configured by a prior call to pcie_write_mps. */ mrrs = pcie_get_mps(dev); /* MRRS is a R/W register. Invalid values can be written, but a * subsequent read will verify if the value is acceptable or not. * If the MRRS value provided is not acceptable (e.g., too large), * shrink the value until it is acceptable to the HW. */ while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) { rc = pcie_set_readrq(dev, mrrs); if (!rc) break; dev_warn(&dev->dev, "Failed attempting to set the MRRS\n"); mrrs /= 2; } if (mrrs < 128) dev_err(&dev->dev, "MRRS was unable to be configured with a " "safe value. If problems are experienced, try running " "with pci=pcie_bus_safe.\n"); } static int pcie_bus_configure_set(struct pci_dev *dev, void *data) { int mps, orig_mps; if (!pci_is_pcie(dev)) return 0; mps = 128 << *(u8 *)data; orig_mps = pcie_get_mps(dev); pcie_write_mps(dev, mps); pcie_write_mrrs(dev); dev_info(&dev->dev, "PCI-E Max Payload Size set to %4d/%4d (was %4d), " "Max Read Rq %4d\n", pcie_get_mps(dev), 128 << dev->pcie_mpss, orig_mps, pcie_get_readrq(dev)); return 0; } /* pcie_bus_configure_settings requires that pci_walk_bus work in a top-down, * parents then children fashion. If this changes, then this code will not * work as designed. */ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) { u8 smpss; if (!pci_is_pcie(bus->self)) return; if (pcie_bus_config == PCIE_BUS_TUNE_OFF) return; /* FIXME - Peer to peer DMA is possible, though the endpoint would need * to be aware to the MPS of the destination. To work around this, * simply force the MPS of the entire system to the smallest possible. */ if (pcie_bus_config == PCIE_BUS_PEER2PEER) smpss = 0; if (pcie_bus_config == PCIE_BUS_SAFE) { smpss = mpss; pcie_find_smpss(bus->self, &smpss); pci_walk_bus(bus, pcie_find_smpss, &smpss); } pcie_bus_configure_set(bus->self, &smpss); pci_walk_bus(bus, pcie_bus_configure_set, &smpss); } EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) { unsigned int devfn, pass, max = bus->busn_res.start; struct pci_dev *dev; dev_dbg(&bus->dev, "scanning bus\n"); /* Go find them, Rover! */ for (devfn = 0; devfn < 0x100; devfn += 8) pci_scan_slot(bus, devfn); /* Reserve buses for SR-IOV capability. */ max += pci_iov_bus_range(bus); /* * After performing arch-dependent fixup of the bus, look behind * all PCI-to-PCI bridges on this bus. */ if (!bus->is_added) { dev_dbg(&bus->dev, "fixups for bus\n"); pcibios_fixup_bus(bus); if (pci_is_root_bus(bus)) bus->is_added = 1; } for (pass=0; pass < 2; pass++) list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) max = pci_scan_bridge(bus, dev, max, pass); } /* * We've scanned the bus and so we know all about what's on * the other side of any bridges that may be on this bus plus * any devices. * * Return how far we've got finding sub-buses. */ dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max); return max; } struct pci_bus *pci_create_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources) { int error; struct pci_host_bridge *bridge; struct pci_bus *b, *b2; struct pci_host_bridge_window *window, *n; struct resource *res; resource_size_t offset; char bus_addr[64]; char *fmt; b = pci_alloc_bus(); if (!b) return NULL; b->sysdata = sysdata; b->ops = ops; b2 = pci_find_bus(pci_domain_nr(b), bus); if (b2) { /* If we already got to this bus through a different bridge, ignore it */ dev_dbg(&b2->dev, "bus already known\n"); goto err_out; } bridge = pci_alloc_host_bridge(b); if (!bridge) goto err_out; bridge->dev.parent = parent; bridge->dev.release = pci_release_bus_bridge_dev; dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus); error = device_register(&bridge->dev); if (error) goto bridge_dev_reg_err; b->bridge = get_device(&bridge->dev); device_enable_async_suspend(b->bridge); pci_set_bus_of_node(b); if (!parent) set_dev_node(b->bridge, pcibus_to_node(b)); b->dev.class = &pcibus_class; b->dev.parent = b->bridge; dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus); error = device_register(&b->dev); if (error) goto class_dev_reg_err; /* Create legacy_io and legacy_mem files for this bus */ pci_create_legacy_files(b); b->number = b->busn_res.start = bus; if (parent) dev_info(parent, "PCI host bridge to bus %s\n", dev_name(&b->dev)); else printk(KERN_INFO "PCI host bridge to bus %s\n", dev_name(&b->dev)); /* Add initial resources to the bus */ list_for_each_entry_safe(window, n, resources, list) { list_move_tail(&window->list, &bridge->windows); res = window->res; offset = window->offset; if (res->flags & IORESOURCE_BUS) pci_bus_insert_busn_res(b, bus, res->end); else pci_bus_add_resource(b, res, 0); if (offset) { if (resource_type(res) == IORESOURCE_IO) fmt = " (bus address [%#06llx-%#06llx])"; else fmt = " (bus address [%#010llx-%#010llx])"; snprintf(bus_addr, sizeof(bus_addr), fmt, (unsigned long long) (res->start - offset), (unsigned long long) (res->end - offset)); } else bus_addr[0] = '\0'; dev_info(&b->dev, "root bus resource %pR%s\n", res, bus_addr); } down_write(&pci_bus_sem); list_add_tail(&b->node, &pci_root_buses); up_write(&pci_bus_sem); return b; class_dev_reg_err: put_device(&bridge->dev); device_unregister(&bridge->dev); bridge_dev_reg_err: kfree(bridge); err_out: kfree(b); return NULL; } int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max) { struct resource *res = &b->busn_res; struct resource *parent_res, *conflict; res->start = bus; res->end = bus_max; res->flags = IORESOURCE_BUS; if (!pci_is_root_bus(b)) parent_res = &b->parent->busn_res; else { parent_res = get_pci_domain_busn_res(pci_domain_nr(b)); res->flags |= IORESOURCE_PCI_FIXED; } conflict = insert_resource_conflict(parent_res, res); if (conflict) dev_printk(KERN_DEBUG, &b->dev, "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n", res, pci_is_root_bus(b) ? "domain " : "", parent_res, conflict->name, conflict); else dev_printk(KERN_DEBUG, &b->dev, "busn_res: %pR is inserted under %s%pR\n", res, pci_is_root_bus(b) ? "domain " : "", parent_res); return conflict == NULL; } int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max) { struct resource *res = &b->busn_res; struct resource old_res = *res; resource_size_t size; int ret; if (res->start > bus_max) return -EINVAL; size = bus_max - res->start + 1; ret = adjust_resource(res, res->start, size); dev_printk(KERN_DEBUG, &b->dev, "busn_res: %pR end %s updated to %02x\n", &old_res, ret ? "can not be" : "is", bus_max); if (!ret && !res->parent) pci_bus_insert_busn_res(b, res->start, res->end); return ret; } void pci_bus_release_busn_res(struct pci_bus *b) { struct resource *res = &b->busn_res; int ret; if (!res->flags || !res->parent) return; ret = release_resource(res); dev_printk(KERN_DEBUG, &b->dev, "busn_res: %pR %s released\n", res, ret ? "can not be" : "is"); } struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources) { struct pci_host_bridge_window *window; bool found = false; struct pci_bus *b; int max; list_for_each_entry(window, resources, list) if (window->res->flags & IORESOURCE_BUS) { found = true; break; } b = pci_create_root_bus(parent, bus, ops, sysdata, resources); if (!b) return NULL; if (!found) { dev_info(&b->dev, "No busn resource found for root bus, will use [bus %02x-ff]\n", bus); pci_bus_insert_busn_res(b, bus, 255); } max = pci_scan_child_bus(b); if (!found) pci_bus_update_busn_res_end(b, max); pci_bus_add_devices(b); return b; } EXPORT_SYMBOL(pci_scan_root_bus); /* Deprecated; use pci_scan_root_bus() instead */ struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { LIST_HEAD(resources); struct pci_bus *b; pci_add_resource(&resources, &ioport_resource); pci_add_resource(&resources, &iomem_resource); pci_add_resource(&resources, &busn_resource); b = pci_create_root_bus(parent, bus, ops, sysdata, &resources); if (b) pci_scan_child_bus(b); else pci_free_resource_list(&resources); return b; } EXPORT_SYMBOL(pci_scan_bus_parented); struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata) { LIST_HEAD(resources); struct pci_bus *b; pci_add_resource(&resources, &ioport_resource); pci_add_resource(&resources, &iomem_resource); pci_add_resource(&resources, &busn_resource); b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources); if (b) { pci_scan_child_bus(b); pci_bus_add_devices(b); } else { pci_free_resource_list(&resources); } return b; } EXPORT_SYMBOL(pci_scan_bus); #ifdef CONFIG_HOTPLUG /** * pci_rescan_bus_bridge_resize - scan a PCI bus for devices. * @bridge: PCI bridge for the bus to scan * * Scan a PCI bus and child buses for new devices, add them, * and enable them, resizing bridge mmio/io resource if necessary * and possible. The caller must ensure the child devices are already * removed for resizing to occur. * * Returns the max number of subordinate bus discovered. */ unsigned int __ref pci_rescan_bus_bridge_resize(struct pci_dev *bridge) { unsigned int max; struct pci_bus *bus = bridge->subordinate; max = pci_scan_child_bus(bus); pci_assign_unassigned_bridge_resources(bridge); pci_bus_add_devices(bus); return max; } EXPORT_SYMBOL(pci_add_new_bus); EXPORT_SYMBOL(pci_scan_slot); EXPORT_SYMBOL(pci_scan_bridge); EXPORT_SYMBOL_GPL(pci_scan_child_bus); #endif static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b) { const struct pci_dev *a = to_pci_dev(d_a); const struct pci_dev *b = to_pci_dev(d_b); if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1; else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1; if (a->bus->number < b->bus->number) return -1; else if (a->bus->number > b->bus->number) return 1; if (a->devfn < b->devfn) return -1; else if (a->devfn > b->devfn) return 1; return 0; } void __init pci_sort_breadthfirst(void) { bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp); }