#include <linux/kernel.h> #include <linux/ide.h> #if defined(CONFIG_ARM) || defined(CONFIG_M68K) || defined(CONFIG_MIPS) || \ defined(CONFIG_PARISC) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) #include <asm/ide.h> #else #include <asm-generic/ide_iops.h> #endif /* * Conventional PIO operations for ATA devices */ static u8 ide_inb(unsigned long port) { return (u8) inb(port); } static void ide_outb(u8 val, unsigned long port) { outb(val, port); } /* * MMIO operations, typically used for SATA controllers */ static u8 ide_mm_inb(unsigned long port) { return (u8) readb((void __iomem *) port); } static void ide_mm_outb(u8 value, unsigned long port) { writeb(value, (void __iomem *) port); } void ide_exec_command(ide_hwif_t *hwif, u8 cmd) { if (hwif->host_flags & IDE_HFLAG_MMIO) writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); else outb(cmd, hwif->io_ports.command_addr); } EXPORT_SYMBOL_GPL(ide_exec_command); u8 ide_read_status(ide_hwif_t *hwif) { if (hwif->host_flags & IDE_HFLAG_MMIO) return readb((void __iomem *)hwif->io_ports.status_addr); else return inb(hwif->io_ports.status_addr); } EXPORT_SYMBOL_GPL(ide_read_status); u8 ide_read_altstatus(ide_hwif_t *hwif) { if (hwif->host_flags & IDE_HFLAG_MMIO) return readb((void __iomem *)hwif->io_ports.ctl_addr); else return inb(hwif->io_ports.ctl_addr); } EXPORT_SYMBOL_GPL(ide_read_altstatus); void ide_write_devctl(ide_hwif_t *hwif, u8 ctl) { if (hwif->host_flags & IDE_HFLAG_MMIO) writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); else outb(ctl, hwif->io_ports.ctl_addr); } EXPORT_SYMBOL_GPL(ide_write_devctl); void ide_dev_select(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; u8 select = drive->select | ATA_DEVICE_OBS; if (hwif->host_flags & IDE_HFLAG_MMIO) writeb(select, (void __iomem *)hwif->io_ports.device_addr); else outb(select, hwif->io_ports.device_addr); } EXPORT_SYMBOL_GPL(ide_dev_select); void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; void (*tf_outb)(u8 addr, unsigned long port); u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) tf_outb = ide_mm_outb; else tf_outb = ide_outb; if (valid & IDE_VALID_FEATURE) tf_outb(tf->feature, io_ports->feature_addr); if (valid & IDE_VALID_NSECT) tf_outb(tf->nsect, io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) tf_outb(tf->lbal, io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) tf_outb(tf->lbam, io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) tf_outb(tf->lbah, io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf_outb(tf->device, io_ports->device_addr); } EXPORT_SYMBOL_GPL(ide_tf_load); void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; u8 (*tf_inb)(unsigned long port); u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (mmio) tf_inb = ide_mm_inb; else tf_inb = ide_inb; if (valid & IDE_VALID_ERROR) tf->error = tf_inb(io_ports->feature_addr); if (valid & IDE_VALID_NSECT) tf->nsect = tf_inb(io_ports->nsect_addr); if (valid & IDE_VALID_LBAL) tf->lbal = tf_inb(io_ports->lbal_addr); if (valid & IDE_VALID_LBAM) tf->lbam = tf_inb(io_ports->lbam_addr); if (valid & IDE_VALID_LBAH) tf->lbah = tf_inb(io_ports->lbah_addr); if (valid & IDE_VALID_DEVICE) tf->device = tf_inb(io_ports->device_addr); } EXPORT_SYMBOL_GPL(ide_tf_read); /* * Some localbus EIDE interfaces require a special access sequence * when using 32-bit I/O instructions to transfer data. We call this * the "vlb_sync" sequence, which consists of three successive reads * of the sector count register location, with interrupts disabled * to ensure that the reads all happen together. */ static void ata_vlb_sync(unsigned long port) { (void)inb(port); (void)inb(port); (void)inb(port); } /* * This is used for most PIO data transfers *from* the IDE interface * * These routines will round up any request for an odd number of bytes, * so if an odd len is specified, be sure that there's at least one * extra byte allocated for the buffer. */ void ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; unsigned long data_addr = io_ports->data_addr; unsigned int words = (len + 1) >> 1; u8 io_32bit = drive->io_32bit; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (io_32bit) { unsigned long uninitialized_var(flags); if ((io_32bit & 2) && !mmio) { local_irq_save(flags); ata_vlb_sync(io_ports->nsect_addr); } words >>= 1; if (mmio) __ide_mm_insl((void __iomem *)data_addr, buf, words); else insl(data_addr, buf, words); if ((io_32bit & 2) && !mmio) local_irq_restore(flags); if (((len + 1) & 3) < 2) return; buf += len & ~3; words = 1; } if (mmio) __ide_mm_insw((void __iomem *)data_addr, buf, words); else insw(data_addr, buf, words); } EXPORT_SYMBOL_GPL(ide_input_data); /* * This is used for most PIO data transfers *to* the IDE interface */ void ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; unsigned long data_addr = io_ports->data_addr; unsigned int words = (len + 1) >> 1; u8 io_32bit = drive->io_32bit; u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; if (io_32bit) { unsigned long uninitialized_var(flags); if ((io_32bit & 2) && !mmio) { local_irq_save(flags); ata_vlb_sync(io_ports->nsect_addr); } words >>= 1; if (mmio) __ide_mm_outsl((void __iomem *)data_addr, buf, words); else outsl(data_addr, buf, words); if ((io_32bit & 2) && !mmio) local_irq_restore(flags); if (((len + 1) & 3) < 2) return; buf += len & ~3; words = 1; } if (mmio) __ide_mm_outsw((void __iomem *)data_addr, buf, words); else outsw(data_addr, buf, words); } EXPORT_SYMBOL_GPL(ide_output_data); const struct ide_tp_ops default_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, .write_devctl = ide_write_devctl, .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, .input_data = ide_input_data, .output_data = ide_output_data, };