/* * pcf857x - driver for pcf857x, pca857x, and pca967x I2C GPIO expanders * * Copyright (C) 2007 David Brownell * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <asm/gpio.h> static const struct i2c_device_id pcf857x_id[] = { { "pcf8574", 8 }, { "pca8574", 8 }, { "pca9670", 8 }, { "pca9672", 8 }, { "pca9674", 8 }, { "pcf8575", 16 }, { "pca8575", 16 }, { "pca9671", 16 }, { "pca9673", 16 }, { "pca9675", 16 }, { "max7328", 8 }, { "max7329", 8 }, { } }; MODULE_DEVICE_TABLE(i2c, pcf857x_id); /* * The pcf857x, pca857x, and pca967x chips only expose one read and one * write register. Writing a "one" bit (to match the reset state) lets * that pin be used as an input; it's not an open-drain model, but acts * a bit like one. This is described as "quasi-bidirectional"; read the * chip documentation for details. * * Many other I2C GPIO expander chips (like the pca953x models) have * more complex register models and more conventional circuitry using * push/pull drivers. They often use the same 0x20..0x27 addresses as * pcf857x parts, making the "legacy" I2C driver model problematic. */ struct pcf857x { struct gpio_chip chip; struct i2c_client *client; struct mutex lock; /* protect 'out' */ unsigned out; /* software latch */ }; /*-------------------------------------------------------------------------*/ /* Talk to 8-bit I/O expander */ static int pcf857x_input8(struct gpio_chip *chip, unsigned offset) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); int status; mutex_lock(&gpio->lock); gpio->out |= (1 << offset); status = i2c_smbus_write_byte(gpio->client, gpio->out); mutex_unlock(&gpio->lock); return status; } static int pcf857x_get8(struct gpio_chip *chip, unsigned offset) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); s32 value; value = i2c_smbus_read_byte(gpio->client); return (value < 0) ? 0 : (value & (1 << offset)); } static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); unsigned bit = 1 << offset; int status; mutex_lock(&gpio->lock); if (value) gpio->out |= bit; else gpio->out &= ~bit; status = i2c_smbus_write_byte(gpio->client, gpio->out); mutex_unlock(&gpio->lock); return status; } static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value) { pcf857x_output8(chip, offset, value); } /*-------------------------------------------------------------------------*/ /* Talk to 16-bit I/O expander */ static int i2c_write_le16(struct i2c_client *client, u16 word) { u8 buf[2] = { word & 0xff, word >> 8, }; int status; status = i2c_master_send(client, buf, 2); return (status < 0) ? status : 0; } static int i2c_read_le16(struct i2c_client *client) { u8 buf[2]; int status; status = i2c_master_recv(client, buf, 2); if (status < 0) return status; return (buf[1] << 8) | buf[0]; } static int pcf857x_input16(struct gpio_chip *chip, unsigned offset) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); int status; mutex_lock(&gpio->lock); gpio->out |= (1 << offset); status = i2c_write_le16(gpio->client, gpio->out); mutex_unlock(&gpio->lock); return status; } static int pcf857x_get16(struct gpio_chip *chip, unsigned offset) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); int value; value = i2c_read_le16(gpio->client); return (value < 0) ? 0 : (value & (1 << offset)); } static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value) { struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); unsigned bit = 1 << offset; int status; mutex_lock(&gpio->lock); if (value) gpio->out |= bit; else gpio->out &= ~bit; status = i2c_write_le16(gpio->client, gpio->out); mutex_unlock(&gpio->lock); return status; } static void pcf857x_set16(struct gpio_chip *chip, unsigned offset, int value) { pcf857x_output16(chip, offset, value); } /*-------------------------------------------------------------------------*/ static int pcf857x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pcf857x_platform_data *pdata; struct pcf857x *gpio; int status; pdata = client->dev.platform_data; if (!pdata) return -ENODEV; /* Allocate, initialize, and register this gpio_chip. */ gpio = kzalloc(sizeof *gpio, GFP_KERNEL); if (!gpio) return -ENOMEM; mutex_init(&gpio->lock); gpio->chip.base = pdata->gpio_base; gpio->chip.can_sleep = 1; gpio->chip.dev = &client->dev; gpio->chip.owner = THIS_MODULE; /* NOTE: the OnSemi jlc1562b is also largely compatible with * these parts, notably for output. It has a low-resolution * DAC instead of pin change IRQs; and its inputs can be the * result of comparators. */ /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; * 9670, 9672, 9764, and 9764a use quite a variety. * * NOTE: we don't distinguish here between *4 and *4a parts. */ gpio->chip.ngpio = id->driver_data; if (gpio->chip.ngpio == 8) { gpio->chip.direction_input = pcf857x_input8; gpio->chip.get = pcf857x_get8; gpio->chip.direction_output = pcf857x_output8; gpio->chip.set = pcf857x_set8; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) status = -EIO; /* fail if there's no chip present */ else status = i2c_smbus_read_byte(client); /* '75/'75c addresses are 0x20..0x27, just like the '74; * the '75c doesn't have a current source pulling high. * 9671, 9673, and 9765 use quite a variety of addresses. * * NOTE: we don't distinguish here between '75 and '75c parts. */ } else if (gpio->chip.ngpio == 16) { gpio->chip.direction_input = pcf857x_input16; gpio->chip.get = pcf857x_get16; gpio->chip.direction_output = pcf857x_output16; gpio->chip.set = pcf857x_set16; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) status = -EIO; /* fail if there's no chip present */ else status = i2c_read_le16(client); } else status = -ENODEV; if (status < 0) goto fail; gpio->chip.label = client->name; gpio->client = client; i2c_set_clientdata(client, gpio); /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. * We can't actually know whether a pin is configured (a) as output * and driving the signal low, or (b) as input and reporting a low * value ... without knowing the last value written since the chip * came out of reset (if any). We can't read the latched output. * * In short, the only reliable solution for setting up pin direction * is to do it explicitly. The setup() method can do that, but it * may cause transient glitching since it can't know the last value * written (some pins may need to be driven low). * * Using pdata->n_latch avoids that trouble. When left initialized * to zero, our software copy of the "latch" then matches the chip's * all-ones reset state. Otherwise it flags pins to be driven low. */ gpio->out = ~pdata->n_latch; status = gpiochip_add(&gpio->chip); if (status < 0) goto fail; /* NOTE: these chips can issue "some pin-changed" IRQs, which we * don't yet even try to use. Among other issues, the relevant * genirq state isn't available to modular drivers; and most irq * methods can't be called from sleeping contexts. */ dev_info(&client->dev, "gpios %d..%d on a %s%s\n", gpio->chip.base, gpio->chip.base + gpio->chip.ngpio - 1, client->name, client->irq ? " (irq ignored)" : ""); /* Let platform code set up the GPIOs and their users. * Now is the first time anyone could use them. */ if (pdata->setup) { status = pdata->setup(client, gpio->chip.base, gpio->chip.ngpio, pdata->context); if (status < 0) dev_warn(&client->dev, "setup --> %d\n", status); } return 0; fail: dev_dbg(&client->dev, "probe error %d for '%s'\n", status, client->name); kfree(gpio); return status; } static int pcf857x_remove(struct i2c_client *client) { struct pcf857x_platform_data *pdata = client->dev.platform_data; struct pcf857x *gpio = i2c_get_clientdata(client); int status = 0; if (pdata->teardown) { status = pdata->teardown(client, gpio->chip.base, gpio->chip.ngpio, pdata->context); if (status < 0) { dev_err(&client->dev, "%s --> %d\n", "teardown", status); return status; } } status = gpiochip_remove(&gpio->chip); if (status == 0) kfree(gpio); else dev_err(&client->dev, "%s --> %d\n", "remove", status); return status; } static struct i2c_driver pcf857x_driver = { .driver = { .name = "pcf857x", .owner = THIS_MODULE, }, .probe = pcf857x_probe, .remove = pcf857x_remove, .id_table = pcf857x_id, }; static int __init pcf857x_init(void) { return i2c_add_driver(&pcf857x_driver); } module_init(pcf857x_init); static void __exit pcf857x_exit(void) { i2c_del_driver(&pcf857x_driver); } module_exit(pcf857x_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Brownell");