/******************************************************************************* * * Module Name: rscreate - Create resource lists/tables * ******************************************************************************/ /* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include <acpi/acpi.h> #include <acpi/acresrc.h> #include <acpi/amlcode.h> #include <acpi/acnamesp.h> #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME("rscreate") /******************************************************************************* * * FUNCTION: acpi_rs_create_resource_list * * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream * output_buffer - Pointer to the user's buffer * * RETURN: Status - AE_OK if okay, else a valid acpi_status code * If output_buffer is not large enough, output_buffer_length * indicates how large output_buffer should be, else it * indicates how may u8 elements of output_buffer are valid. * * DESCRIPTION: Takes the byte stream returned from a _CRS, _PRS control method * execution and parses the stream to create a linked list * of device resources. * ******************************************************************************/ acpi_status acpi_rs_create_resource_list(union acpi_operand_object *byte_stream_buffer, struct acpi_buffer *output_buffer) { acpi_status status; u8 *byte_stream_start; acpi_size list_size_needed = 0; u32 byte_stream_buffer_length; ACPI_FUNCTION_TRACE("rs_create_resource_list"); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "byte_stream_buffer = %p\n", byte_stream_buffer)); /* Params already validated, so we don't re-validate here */ byte_stream_buffer_length = byte_stream_buffer->buffer.length; byte_stream_start = byte_stream_buffer->buffer.pointer; /* * Pass the byte_stream_buffer into a module that can calculate * the buffer size needed for the linked list */ status = acpi_rs_get_list_length(byte_stream_start, byte_stream_buffer_length, &list_size_needed); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Status=%X list_size_needed=%X\n", status, (u32) list_size_needed)); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Validate/Allocate/Clear caller buffer */ status = acpi_ut_initialize_buffer(output_buffer, list_size_needed); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Do the conversion */ status = acpi_rs_byte_stream_to_list(byte_stream_start, byte_stream_buffer_length, output_buffer->pointer); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "output_buffer %p Length %X\n", output_buffer->pointer, (u32) output_buffer->length)); return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_create_pci_routing_table * * PARAMETERS: package_object - Pointer to an union acpi_operand_object * package * output_buffer - Pointer to the user's buffer * * RETURN: Status AE_OK if okay, else a valid acpi_status code. * If the output_buffer is too small, the error will be * AE_BUFFER_OVERFLOW and output_buffer->Length will point * to the size buffer needed. * * DESCRIPTION: Takes the union acpi_operand_object package and creates a * linked list of PCI interrupt descriptions * * NOTE: It is the caller's responsibility to ensure that the start of the * output buffer is aligned properly (if necessary). * ******************************************************************************/ acpi_status acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, struct acpi_buffer *output_buffer) { u8 *buffer; union acpi_operand_object **top_object_list; union acpi_operand_object **sub_object_list; union acpi_operand_object *obj_desc; acpi_size buffer_size_needed = 0; u32 number_of_elements; u32 index; struct acpi_pci_routing_table *user_prt; struct acpi_namespace_node *node; acpi_status status; struct acpi_buffer path_buffer; ACPI_FUNCTION_TRACE("rs_create_pci_routing_table"); /* Params already validated, so we don't re-validate here */ /* Get the required buffer length */ status = acpi_rs_get_pci_routing_table_length(package_object, &buffer_size_needed); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "buffer_size_needed = %X\n", (u32) buffer_size_needed)); /* Validate/Allocate/Clear caller buffer */ status = acpi_ut_initialize_buffer(output_buffer, buffer_size_needed); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* * Loop through the ACPI_INTERNAL_OBJECTS - Each object * should be a package that in turn contains an * acpi_integer Address, a u8 Pin, a Name and a u8 source_index. */ top_object_list = package_object->package.elements; number_of_elements = package_object->package.count; buffer = output_buffer->pointer; user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer); for (index = 0; index < number_of_elements; index++) { /* * Point user_prt past this current structure * * NOTE: On the first iteration, user_prt->Length will * be zero because we cleared the return buffer earlier */ buffer += user_prt->length; user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer); /* * Fill in the Length field with the information we have at this point. * The minus four is to subtract the size of the u8 Source[4] member * because it is added below. */ user_prt->length = (sizeof(struct acpi_pci_routing_table) - 4); /* Each element of the top-level package must also be a package */ if (ACPI_GET_OBJECT_TYPE(*top_object_list) != ACPI_TYPE_PACKAGE) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X]) Need sub-package, found %s\n", index, acpi_ut_get_object_type_name (*top_object_list))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* Each sub-package must be of length 4 */ if ((*top_object_list)->package.count != 4) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X]) Need package of length 4, found length %d\n", index, (*top_object_list)->package.count)); return_ACPI_STATUS(AE_AML_PACKAGE_LIMIT); } /* * Dereference the sub-package. * The sub_object_list will now point to an array of the four IRQ * elements: [Address, Pin, Source, source_index] */ sub_object_list = (*top_object_list)->package.elements; /* 1) First subobject: Dereference the PRT.Address */ obj_desc = sub_object_list[0]; if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { user_prt->address = obj_desc->integer.value; } else { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X].Address) Need Integer, found %s\n", index, acpi_ut_get_object_type_name (obj_desc))); return_ACPI_STATUS(AE_BAD_DATA); } /* 2) Second subobject: Dereference the PRT.Pin */ obj_desc = sub_object_list[1]; if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { user_prt->pin = (u32) obj_desc->integer.value; } else { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X].Pin) Need Integer, found %s\n", index, acpi_ut_get_object_type_name (obj_desc))); return_ACPI_STATUS(AE_BAD_DATA); } /* 3) Third subobject: Dereference the PRT.source_name */ obj_desc = sub_object_list[2]; switch (ACPI_GET_OBJECT_TYPE(obj_desc)) { case ACPI_TYPE_LOCAL_REFERENCE: if (obj_desc->reference.opcode != AML_INT_NAMEPATH_OP) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X].Source) Need name, found reference op %X\n", index, obj_desc->reference.opcode)); return_ACPI_STATUS(AE_BAD_DATA); } node = obj_desc->reference.node; /* Use *remaining* length of the buffer as max for pathname */ path_buffer.length = output_buffer->length - (u32) ((u8 *) user_prt->source - (u8 *) output_buffer->pointer); path_buffer.pointer = user_prt->source; status = acpi_ns_handle_to_pathname((acpi_handle) node, &path_buffer); /* +1 to include null terminator */ user_prt->length += (u32) ACPI_STRLEN(user_prt->source) + 1; break; case ACPI_TYPE_STRING: ACPI_STRCPY(user_prt->source, obj_desc->string.pointer); /* * Add to the Length field the length of the string * (add 1 for terminator) */ user_prt->length += obj_desc->string.length + 1; break; case ACPI_TYPE_INTEGER: /* * If this is a number, then the Source Name is NULL, since the * entire buffer was zeroed out, we can leave this alone. * * Add to the Length field the length of the u32 NULL */ user_prt->length += sizeof(u32); break; default: ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X].Source) Need Ref/String/Integer, found %s\n", index, acpi_ut_get_object_type_name (obj_desc))); return_ACPI_STATUS(AE_BAD_DATA); } /* Now align the current length */ user_prt->length = (u32) ACPI_ROUND_UP_to_64_bITS(user_prt->length); /* 4) Fourth subobject: Dereference the PRT.source_index */ obj_desc = sub_object_list[3]; if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { user_prt->source_index = (u32) obj_desc->integer.value; } else { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "(PRT[%X].source_index) Need Integer, found %s\n", index, acpi_ut_get_object_type_name (obj_desc))); return_ACPI_STATUS(AE_BAD_DATA); } /* Point to the next union acpi_operand_object in the top level package */ top_object_list++; } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "output_buffer %p Length %X\n", output_buffer->pointer, (u32) output_buffer->length)); return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_create_byte_stream * * PARAMETERS: linked_list_buffer - Pointer to the resource linked list * output_buffer - Pointer to the user's buffer * * RETURN: Status AE_OK if okay, else a valid acpi_status code. * If the output_buffer is too small, the error will be * AE_BUFFER_OVERFLOW and output_buffer->Length will point * to the size buffer needed. * * DESCRIPTION: Takes the linked list of device resources and * creates a bytestream to be used as input for the * _SRS control method. * ******************************************************************************/ acpi_status acpi_rs_create_byte_stream(struct acpi_resource *linked_list_buffer, struct acpi_buffer *output_buffer) { acpi_status status; acpi_size byte_stream_size_needed = 0; ACPI_FUNCTION_TRACE("rs_create_byte_stream"); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "linked_list_buffer = %p\n", linked_list_buffer)); /* * Params already validated, so we don't re-validate here * * Pass the linked_list_buffer into a module that calculates * the buffer size needed for the byte stream. */ status = acpi_rs_get_byte_stream_length(linked_list_buffer, &byte_stream_size_needed); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "byte_stream_size_needed=%X, %s\n", (u32) byte_stream_size_needed, acpi_format_exception(status))); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Validate/Allocate/Clear caller buffer */ status = acpi_ut_initialize_buffer(output_buffer, byte_stream_size_needed); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Do the conversion */ status = acpi_rs_list_to_byte_stream(linked_list_buffer, byte_stream_size_needed, output_buffer->pointer); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "output_buffer %p Length %X\n", output_buffer->pointer, (u32) output_buffer->length)); return_ACPI_STATUS(AE_OK); }