/* * Device Tree Source for AMCC Canyonlands (460EX) * * Copyright 2008 DENX Software Engineering, Stefan Roese * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. */ /dts-v1/; / { #address-cells = <2>; #size-cells = <1>; model = "amcc,bluestone"; compatible = "amcc,bluestone"; dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; serial0 = &UART0; serial1 = &UART1; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; model = "PowerPC,APM82181"; reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ i-cache-line-size = <32>; d-cache-line-size = <32>; i-cache-size = <32768>; d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; next-level-cache = <&L2C0>; }; }; memory { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <0>; dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; }; UIC1: interrupt-controller1 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <1>; dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; UIC2: interrupt-controller2 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <2>; dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; UIC3: interrupt-controller3 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <3>; dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; OCM1: ocm@400040000 { compatible = "ibm,ocm"; status = "enabled"; cell-index = <1>; /* configured in U-Boot */ reg = <4 0x00040000 0x8000>; /* 32K */ }; /* TODO: Check this for Maui */ SDR0: sdr { compatible = "ibm,sdr-460ex"; dcr-reg = <0x00e 0x002>; }; /* TODO: Change for Maui */ CPR0: cpr { compatible = "ibm,cpr-460ex"; dcr-reg = <0x00c 0x002>; }; L2C0: l2c { compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; dcr-reg = <0x020 0x008 0x030 0x008>; cache-line-size = <32>; cache-size = <262144>; interrupt-parent = <&UIC1>; interrupts = <11 1>; }; CPM0: cpm { compatible = "ibm, cpm-apm821xx", "ibm,cpm"; cell-index = <0>; dcr-reg = <0x160 0x003>; pm-cpu = <0x02000000>; pm-doze = <0x302570F0>; pm-nap = <0x302570F0>; pm-deepsleep = <0x302570F0>; pm-iic-device = <&IIC0>; pm-emac-device = <&EMAC0>; }; /* rtc: realtime-clock{ compatible = "ibm, rtc", "m48t86"; dcr-reg = <0x240 0x009>; interrupts = <0x1a 0x4>; interrupt-parent = <&UIC2>; }; */ plb { compatible = "ibm,plb-460ex", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; ranges; clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: sdram { compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; dcr-reg = <0x010 0x002>; }; CRYPTO: crypto@180000 { compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; reg = <4 0x00180000 0x80400>; interrupt-parent = <&UIC0>; interrupts = <0x1d 0x4>; }; PKA: pka@114000 { device_type = "pka"; compatible = "ppc4xx-pka", "amcc, ppc4xx-pka"; reg = <4 0x00114000 0x4000>; interrupt-parent = <&UIC0>; interrupts = <0x14 0x2>; }; TRNG: trng@110000 { device_type = "trng"; compatible = "ppc4xx-trng", "amcc, ppc4xx-trng"; reg = <4 0x00110000 0x100>; interrupt-parent = <&UIC1>; interrupts = <0x3 0x2>; }; /* RTC: rtc { compatible = "ibm,rtc"; dcr-reg = <0x240 0x009>; interrupts = <0x1a 0x4>; interrupt-parent = <&UIC2>; }; */ MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; descriptor-memory = "ocm"; dcr-reg = <0x180 0x062>; num-tx-chans = <1>; num-rx-chans = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-parent = <&UIC2>; interrupts = < /*TXEOB*/ 0x6 0x4 /*RXEOB*/ 0x7 0x4 /*SERR*/ 0x3 0x4 /*TXDE*/ 0x4 0x4 /*RXDE*/ 0x5 0x4 /*TX0 COAL*/ 0x8 0x2 /*TX1 COAL 0x9 0x2*/ /*RX0 COAL*/ 0xc 0x2 /*RX1 COAL 0xd 0x2*/>; }; /* TODO: Check for Maui */ USBOTG0: usbotg@bff80000 { compatible = "amcc,usb-otg-405ex"; reg = <4 0xbff80000 0x10000>; interrupt-parent = <&USBOTG0>; interrupts = <0 1 2>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-map = ; }; /* SATA DWC devices */ SATA0: sata@bffd1000 { compatible = "amcc,sata-460ex"; reg = <4 0xbffd1000 0x800 /* SATA0 */ 4 0xbffd0800 0x400>; /* AHBDMA */ dma-channel=<0>; interrupt-parent = <&UIC0>; interrupts = <26 4 /* SATA0 */ 25 4>; /* AHBDMA */ }; SATA1: sata@bffd1800 { compatible = "amcc,sata-460ex"; reg = <4 0xbffd1800 0x800 /* SATA1 */ 4 0xbffd0800 0x400>; /* AHBDMA */ dma-channel=<1>; interrupt-parent = <&UIC0>; interrupts = <27 4 /* SATA1 */ 25 4>; /* AHBDMA */ }; ADMA: adma { compatible = "amcc,apm82181-adma"; device_type = "dma"; #address-cells = <2>; #size-cells = <1>; /*dma-4channel@0{ compatible = "amcc,apm82181-dma-4channel"; cell-index = <0>; label = "plb_dma0"; interrupt-parent = <&UIC0>; interrupts = <0xc 0x4>; pool_size = <0x4000>; dcr-reg = <0x200 0x207>; };*/ dma-4channel@1 { compatible = "amcc,apm82181-dma-4channel"; cell-index = <1>; label = "plb_dma1"; interrupt-parent = <&UIC0>; interrupts = <0xd 0x4>; pool_size = <0x4000>; dcr-reg = <0x208 0x20f>; }; dma-4channel@2 { compatible = "amcc,apm82181-dma-4channel"; cell-index = <2>; label = "plb_dma2"; interrupt-parent = <&UIC0>; interrupts = <0xe 0x4>; pool_size = <0x4000>; dcr-reg = <0x210 0x217>; }; dma-4channel@3 { compatible = "amcc,apm82181-dma-4channel"; cell-index = <3>; label = "plb_dma3"; interrupt-parent = <&UIC0>; interrupts = <0xf 0x4>; pool_size = <0x4000>; dcr-reg = <0x218 0x21f>; }; xor@4{ compatible = "amcc,xor"; cell-index = <4>; label = "xor"; interrupt-parent = <&UIC1>; interrupts = <0x16 0x4>; reg = <0x00000004 0x00200000 0x00000224>; }; }; POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-460ex", "ibm,ebc"; dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>; interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; /* TODO: Change for Bluestone platform . 4M Nor Flash */ nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; reg = <0x00000000 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x00000000 0x00180000>; }; partition@180000 { label = "env"; reg = <0x00180000 0x00020000>; }; partition@1a0000 { label = "u-boot"; reg = <0x001a0000 0x00060000>; }; }; ndfc@1,0 { compatible = "ibm,ndfc"; reg = <00000003 00000000 00002000>; ccr = <0x00001000>; bank-settings = <0x80002222>; #address-cells = <1>; #size-cells = <1>; /*2Gb Nand Flash*/ nand { #address-cells = <1>; #size-cells = <1>; partition@0 { label = "firmware"; reg = <0x00000000 0x00C00000>; }; partition@c00000 { label = "environment"; reg = <0x00C00000 0x00B00000>; }; partition@1700000 { label = "kernel"; reg = <0x01700000 0x00E00000>; }; partition@2500000 { label = "root"; reg = <0x02500000 0x08200000>; }; partition@a700000 { label = "device-tree"; reg = <0x0A700000 0x00B00000>; }; partition@b200000 { label = "config"; reg = <0x0B200000 0x00D00000>; }; partition@bf00000 { label = "diag"; reg = <0x0BF00000 0x00C00000>; }; partition@cb00000 { label = "vendor"; reg = <0x0CB00000 0x3500000>; }; }; }; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; reg = <0xef600300 0x00000008>; virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; interrupts = <0x1 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; reg = <0xef600400 0x00000008>; virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC0>; interrupts = <0x1 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-460ex", "ibm,iic"; reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; #address-cells = <1>; #size-cells = <0>; rtc@68 { compatible = "stm,m41t80"; reg = <0x68>; interrupt-parent = <&UIC0>; interrupts = <0x9 0x8>; }; sttm@4C { compatible = "adm,adm1032"; reg = <0x4C>; interrupt-parent = <&UIC1>; interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */ }; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-460ex", "ibm,iic"; reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x3 0x4>; }; RGMII0: emac-rgmii@ef601500 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <0xef601500 0x00000008>; has-mdio; }; TAH0: emac-tah@ef601350 { compatible = "ibm,tah-460ex", "ibm,tah"; reg = <0xef601350 0x00000030>; }; /* TODO: Change for Maui */ EMAC0: ethernet@ef600c00 { device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4sync"; interrupt-parent = <&EMAC0>; interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; interrupt-map = ; reg = <0xef600c00 0x000000c4>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; max-frame-size = <9000>; rx-fifo-size = <16384>; tx-fifo-size = <2048>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; tah-device = <&TAH0>; tah-channel = <0>; has-inverted-stacr-oc; has-new-stacr-staopc; }; }; DMA: plb_dma@400300200 { #address-cells = <1>; #size-cells = <1>; compatible = "amcc,dma"; cell-index = <0>; reg = <4 00300200 200>; dcr-reg = <0x100 0x13f>; interrupt-parent = <&UIC0>; interrupts = <0 1 2 3>; interrupt-map = < /*chan 0*/ 0 &UIC0 12 4 /* chan1*/ 1 &UIC0 13 4 /* chan2*/ 2 &UIC0 14 4 /* chan3*/ 3 &UIC0 15 4>; dma-4channel@0{ compatible = "amcc,dma-4channel"; cell-index = <0>; label = "channel0"; reg = <0x100 0x107>; }; /* dma-4channel@1 { compatible = "amcc,dma-4channel"; cell-index = <1>; label = "channel1"; reg = <0x108 0x10f>; }; dma-4channel@2 { compatible = "amcc,dma-4channel"; cell-index = <2>; label = "channel2"; reg = <0x110 0x117>; }; dma-4channel@3 { compatible = "amcc,dma-4channel"; cell-index = <3>; label = "channel3"; reg = <0x118 0x11f>; }; */ }; PCIE0: pciex@d00000000 { device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; port = <0x0>; /* port number */ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ 0x0000000c 0x08010000 0x00001000>; /* Registers */ dcr-reg = <0x100 0x020>; sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 40 to 0x7f */ bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). * We are de-swizzling here because the numbers are actually for * port of the root complex virtual P2P bridge. But I want * to avoid putting a node for it in the tree, so the numbers * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; }; };