This README escorted the skystar2-driver rewriting procedure. It describes the state of the new flexcop-driver set and some internals are written down here too. How to do something in here? ============================ make -f Makefile.t make -C ../build-2.6 ./in.sh # load the drivers ./rm.sh # unload the drivers Please read this file, if you want to contribute. This document hopefully describes things about the flexcop and its device-offsprings. Goal is to write a easy-to-write and easy-to-read set of drivers based on the skystar2.c and other information. This directory is temporary. It is used for rewriting the skystar2.c and to create shared code, which then can be used by the usb box as well. Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been touched and rewritten. General coding processing ========================= We should proceed as follows (as long as no one complains): 0) Think before start writing code! 1) rewriting the skystar2.c with the help of the flexcop register descriptions and splitting up the files to a pci-bus-part and a flexcop-part. The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the device-specific part and b2c2-flexcop.ko for the common flexcop-functions. 2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c and other pci drivers) 3) make some beautification (see 'Improvements when rewriting (refactoring) is done') 4) Testing the new driver and maybe substitute the skystar2.c with it, to reach a wider tester audience. 5) creating an usb-bus-part using the already written flexcop code for the pci card. Idea: create a kernel-object for the flexcop and export all important functions. This option saves kernel-memory, but maybe a lot of functions have to be exported to kernel namespace. Current situation ================= 0) Done :) 1) Done (some minor issues left) 2) Done 3) Not ready yet, more information is necessary 4) next to be done (see the table below) 5) USB driver is working (yes, there are some minor issues) What seems to be ready? ----------------------- 1) Rewriting 1a) i2c is cut off from the flexcop-pci.c and seems to work 1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c 1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c 1e) eeprom (reading MAC address) 1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) 1f) misc. register accesses for reading parameters (e.g. resetting, revision) 1g) pid/mac filter (flexcop-hw-filter.c) 1i) dvb-stuff initialization in flexcop.c (done) 1h) dma stuff (now just using the size-irq, instead of all-together, to be done) 1j) remove flexcop initialization from flexcop-pci.c completely (done) 1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') 1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from non-static where possible, moved code to proper places) 2) Search for errors in the leftover of flexcop-pci.c (partially done) 5a) add MAC address reading What to do in the near future? -------------------------------------- (no special order here) 5) USB driver 5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) 5c) feeding of ISOC data to the software demux (format of the isochronous data and speed optimization, no real error) Testing changes --------------- O = item is working P = item is partially working X = item is not working N = item does not apply here <empty field> = item need to be examined | PCI | USB item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 -------+-------+---------+---------+-------+-------+---------+---------+------- 1a) | O | | | | N | N | N | N 1b) | O | | | | | | O | 1c) | N | N | | | N | N | O | 1d) | O | O 1e) | O | O 1f) | P 1g) | O 1h) | P | 1i) | O | N 1j) | O | N 1l) | O | N 2) | O | N 5a) | N | O 5b)* | N | 5c)* | N | * - not done yet Known bugs and problems and TODO -------------------------------- 1g/h/l) when pid filtering is enabled on the pci card DMA usage currently: The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first address and triggers an IRQ when it's full and starts writing to the second address. When the second address is full, the IRQ is triggered again, and the flexcop writes to first address again, and so on. The buffersize of each address is currently 640*188 bytes. Problem is, when using hw-pid-filtering and doing some low-bandwidth operation (like scanning) the buffers won't be filled enough to trigger the IRQ. That's why: When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ is triggered. Is the current write address of DMA1 different to the one during the last IRQ, then the data is passed to the demuxer. There is an additional DMA-IRQ-method: packet count IRQ. This isn't implemented correctly yet. The solution is to disable HW PID filtering, but I don't know how the DVB API software demux behaves on slow systems with 45MBit/s TS. Solved bugs :) -------------- 1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't working) SOLUTION: also index 0 was affected, because net_translation is done for these indexes by default 5b) isochronous transfer does only work in the first attempt (for the Sky2PC USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really woke up again (don't know if this need fixes, see flexcop-fe-tuner.c:flexcop_sleep) Improvements when rewriting (refactoring) is done ================================================= - split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control (enable sleeping for other demods than dvb-s) - add support for CableStar (stv0297 Microtune 203x/ALPS) Debugging --------- - add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it with this flexcop, this is important, because i2c is now using the flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for that, please tell us so). Everything which is identical in the following table, can be put into a common flexcop-module. PCI USB ------------------------------------------------------------------------------- Different: Register access: accessing IO memory USB control message I2C bus: I2C bus of the FC USB control message Data transfer: DMA isochronous transfer EEPROM transfer: through i2c bus not clear yet Identical: Streaming: accessing registers PID Filtering: accessing registers Sram destinations: accessing registers Tuner/Demod: I2C bus DVB-stuff: can be written for common use Restrictions: ============ We need to create a bus-specific-struct and a flexcop-struct. bus-specific-struct: struct flexcop_pci ... struct flexcop_usb ... struct flexcop_device { void *bus_specific; /* container for bus-specific struct */ ... } PCI i2c can read/write max 4 bytes at a time, USB can more Functions ========= Syntax ------ - Flexcop functions will be called "flexcop(_[a-z0-9]+)+" and exported as such if needed. - Flexcop-device functions will be called "flexcop_device(_[a-z0-9]+)+" and exported as such if needed. - Both will be compiled to b2c2-flexcop.ko and their source can be found in the flexcop*.[hc] Callbacks and exports --------------------- Bus-specific functions will be given as callbacks (function pointers) to the flexcop-module. (within the flexcop_device-struct) Initialization process ====================== b2c2-flexcop.ko is loaded b2c2-flexcop-<bus>.ko is loaded suppose a device is found: malloc flexcop and the bus-specific variables (via flexcop_device_malloc) fill the bus-specific variable fill the flexcop variable (especially the bus-specific callbacks) bus-specific initialization - ... do the common initialization (via flexcop_device_initialize) - reset the card - determine flexcop type (II, IIB, III) - hw_filters (bus dependent) - 0x204 - set sram size - create the dvb-stuff - create i2c stuff - frontend-initialization done bus specific: - media_destination (this and the following 3 are bus specific) - cai_dest - cao_dest - net_destination Bugs fixed while rewriting the driver ===================================== - EEPROM access (to read the MAC address) was fixed to death some time last year. (fixed here and in skystar2.c) (Bjarne, this was the piece of code (fix-chipaddr) we were wondering about) Acknowledgements (just for the rewriting part) ================ Bjarne Steinsbo thought a lot in the first place of the pci part for this code sharing idea. Andreas Oberritter for providing a recent PCI initialization template (pluto2.c). Boleslaw Ciesielski for pointing out a problem with firmware loader. Vadim Catana for correcting the USB transfer. comments, critics and ideas to linux-dvb@linuxtv.org or patrick.boettcher@desy.de