From 2fd53a7e9b1392f9cc3002a24f3c13b2796e70c3 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 1 Sep 2006 17:15:36 +0200 Subject: [ALSA] [PPC,SOUND] Fix audio gpio state detection When booting with line out or headphone plugged, you won't hear anything. The problem is that after reset all channels are muted, but the actual value of the gpio port doesn't exactly match the active_val settings as expected by check_audio_gpio. For example, the line_mute port is set to 7, but check_audio_gpio would expect 0xd or 0xf, thus its return value indicates that it is not active, even though it is. AFAICS only looking at the low bit is enough to determine whether the port is active. Signed-off-by: Andreas Schwab Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/ppc/tumbler.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index 6ae2d5b9aa4..cdff53e4a17 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -190,7 +190,7 @@ static int check_audio_gpio(struct pmac_gpio *gp) ret = do_gpio_read(gp); - return (ret & 0xd) == (gp->active_val & 0xd); + return (ret & 0x1) == (gp->active_val & 0x1); } static int read_audio_gpio(struct pmac_gpio *gp) @@ -198,7 +198,8 @@ static int read_audio_gpio(struct pmac_gpio *gp) int ret; if (! gp->addr) return 0; - ret = ((do_gpio_read(gp) & 0x02) !=0); + ret = do_gpio_read(gp); + ret = (ret & 0x02) !=0; return ret == gp->active_state; } -- cgit v1.2.3-18-g5258