From ef8ff89b58546055e238c3b521f83b440dfe8ef2 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 9 Mar 2010 16:00:20 +0100 Subject: kbuild: Really don't clean bounds.h and asm-offsets.h Commit 7d3cc8b tried to keep bounds.h and asm-offsets.h during make clean by filtering these out of $(clean-files), but they are listed in $(targets) and $(always) and thus removed automatically. Introduce a new $(no-clean-files) variable to really skip such files in Makefile.clean. Signed-off-by: Michal Marek --- scripts/Makefile.clean | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index 6f89fbb5625..686cb0d31c7 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -45,6 +45,8 @@ __clean-files := $(extra-y) $(always) \ $(host-progs) \ $(hostprogs-y) $(hostprogs-m) $(hostprogs-) +__clean-files := $(filter-out $(no-clean-files), $(__clean-files)) + # as clean-files is given relative to the current directory, this adds # a $(obj) prefix, except for absolute paths -- cgit v1.2.3-70-g09d2 From 6a841528d288ac420052f5c98fd426b0fcdc5b52 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 11 Aug 2010 23:04:16 -0600 Subject: param: silence .init.text references from param ops Ideally, we'd check that it was only the "set" function which was __init, and that the permissions were r/o. But that's a little hard. Signed-off-by: Rusty Russell Acked-by: Sam Ravnborg Tested-by: Phil Carmody --- scripts/mod/modpost.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 1ce655dde99..b16044002d9 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1033,6 +1033,13 @@ static const struct sectioncheck *section_mismatch( * fromsec = .data* * atsym =__param* * + * Pattern 1a: + * module_param_call() ops can refer to __init set function if permissions=0 + * The pattern is identified by: + * tosec = .init.text + * fromsec = .data* + * atsym = __param_ops_* + * * Pattern 2: * Many drivers utilise a *driver container with references to * add, remove, probe functions etc. @@ -1067,6 +1074,12 @@ static int secref_whitelist(const struct sectioncheck *mismatch, (strncmp(fromsym, "__param", strlen("__param")) == 0)) return 0; + /* Check for pattern 1a */ + if (strcmp(tosec, ".init.text") == 0 && + match(fromsec, data_sections) && + (strncmp(fromsym, "__param_ops_", strlen("__param_ops_")) == 0)) + return 0; + /* Check for pattern 2 */ if (match(tosec, init_exit_sections) && match(fromsec, data_sections) && -- cgit v1.2.3-70-g09d2 From 5003bab82d56754b27be01eef24495a02e00039d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 11 Aug 2010 00:42:26 -0700 Subject: fix "scripts/mod/modpost.c: fix memory leak" Fix error introduced by 37ed19d5cce35a40d3913cf9aa208ce9f60db3d7 ("scripts/mod/modpost.c: fix memory leak"). - don't kfree("") - fix one missed conversion Reported-by: Stephen Rothwell Tested-by: Stephen Rothwell Cc: Alexey Fomenko Cc: Trevor Keith Cc: Rusty Russell Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/mod/modpost.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 1ce655dde99..7acbdd8fcae 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -14,6 +14,7 @@ #define _GNU_SOURCE #include #include +#include #include "modpost.h" #include "../../include/generated/autoconf.h" #include "../../include/linux/license.h" @@ -1217,7 +1218,7 @@ static char *sec2annotation(const char *s) strcat(p, " "); return r; /* we leak her but we do not care */ } else { - return ""; + return strdup(""); } } @@ -1352,7 +1353,7 @@ static void report_sec_mismatch(const char *modname, "%s%s so it may be used outside an exit section.\n", from, prl_from, fromsym, from_p, to, prl_to, tosym, to_p, - sec2annotation(tosec), tosym, to_p); + prl_to, tosym, to_p); free(prl_from); free(prl_to); break; -- cgit v1.2.3-70-g09d2 From b6d676db35ca6c99180bb12dcbd4a8c3b2995e49 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 10 Aug 2010 18:02:50 -0700 Subject: mtd/nand_base: fix kernel-doc warnings & typos Fix mtd/nand_base.c kernel-doc warnings and typos. Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs' Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len' Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len' Signed-off-by: Randy Dunlap Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/nand/nand_base.c | 39 ++++++++++++++++++++------------------- scripts/kernel-doc | 2 ++ 2 files changed, 22 insertions(+), 19 deletions(-) (limited to 'scripts') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 16a1714df00..a3c7473dd40 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -889,17 +889,17 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) } /** - * __nand_unlock - [REPLACABLE] unlocks specified locked blockes + * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks * - * @param mtd - mtd info - * @param ofs - offset to start unlock from - * @param len - length to unlock - * @invert - when = 0, unlock the range of blocks within the lower and + * @mtd: mtd info + * @ofs: offset to start unlock from + * @len: length to unlock + * @invert: when = 0, unlock the range of blocks within the lower and * upper boundary address - * whne = 1, unlock the range of blocks outside the boundaries + * when = 1, unlock the range of blocks outside the boundaries * of the lower and upper boundary address * - * @return - unlock status + * return - unlock status */ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len, int invert) @@ -931,13 +931,13 @@ static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, } /** - * nand_unlock - [REPLACABLE] unlocks specified locked blockes + * nand_unlock - [REPLACEABLE] unlocks specified locked blocks * - * @param mtd - mtd info - * @param ofs - offset to start unlock from - * @param len - length to unlock + * @mtd: mtd info + * @ofs: offset to start unlock from + * @len: length to unlock * - * @return - unlock status + * return - unlock status */ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { @@ -982,16 +982,16 @@ out: } /** - * nand_lock - [REPLACABLE] locks all blockes present in the device + * nand_lock - [REPLACEABLE] locks all blocks present in the device * - * @param mtd - mtd info - * @param ofs - offset to start unlock from - * @param len - length to unlock + * @mtd: mtd info + * @ofs: offset to start unlock from + * @len: length to unlock * - * @return - lock status + * return - lock status * - * This feature is not support in many NAND parts. 'Micron' NAND parts - * do have this feature, but it allows only to lock all blocks not for + * This feature is not supported in many NAND parts. 'Micron' NAND parts + * do have this feature, but it allows only to lock all blocks, not for * specified range for block. * * Implementing 'lock' feature by making use of 'unlock', for now. @@ -2093,6 +2093,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, * nand_fill_oob - [Internal] Transfer client buffer to oob * @chip: nand chip structure * @oob: oob data buffer + * @len: oob data write length * @ops: oob ops structure */ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len, diff --git a/scripts/kernel-doc b/scripts/kernel-doc index fcdfb245a57..102e1235fd5 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1454,6 +1454,8 @@ sub dump_enum($$) { my $file = shift; $x =~ s@/\*.*?\*/@@gos; # strip comments. + $x =~ s/^#\s*define\s+.*$//; # strip #define macros inside enums + if ($x =~ /enum\s+(\w+)\s*{(.*)}/) { $declaration_name = $1; my $members = $2; -- cgit v1.2.3-70-g09d2 From 801690caf1894d4f8b1277ca9f5dcf0bcf9b3f58 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 12 Aug 2010 09:11:51 +0200 Subject: kconfig: fix savedefconfig for tristate choices savedefconfig failed to save choice symbols equal to 'y' for tristate choices. This resulted in this value being lost. In particular is fixes an issue where make ARCH=avr32 atngw100_defconfig make ARCH=avr32 savedefconfig cp defconfig arch/avr32/configs/atngw100_defconfig make ARCH=avr32 atngw100_defconfig diff -u .config .config.old failed to produce an identical .config. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index f81f263b64f..e5d66e4f148 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -497,7 +497,7 @@ int conf_write_defconfig(const char *filename) /* * If symbol is a choice value and equals to the * default for a choice - skip. - * But only if value equal to "y". + * But only if value is bool and equal to "y" . */ if (sym_is_choice_value(sym)) { struct symbol *cs; @@ -506,9 +506,8 @@ int conf_write_defconfig(const char *filename) cs = prop_get_symbol(sym_get_choice_prop(sym)); ds = sym_choice_default(cs); if (sym == ds) { - if ((sym->type == S_BOOLEAN || - sym->type == S_TRISTATE) && - sym_get_tristate_value(sym) == yes) + if ((sym->type == S_BOOLEAN) && + sym_get_tristate_value(sym) == yes) goto next_menu; } } -- cgit v1.2.3-70-g09d2 From a64b44ead002ba15fdf841106a6fd344b8dd46d8 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 12 Aug 2010 09:11:52 +0200 Subject: kconfig: fix tristate choice with minimal config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a minimal config did not specify the value of all choice values, the resulting configuration could have wrong values. Consider following example: config M def_bool y option modules choice prompt "choice list" config A tristate "a" config B tristate "b" endchoice With a defconfig like this: CONFIG_M=y CONFIG_A=y The resulting configuration would have CONFIG_A=m which was unexpected. The problem was not not all choice values were set and thus kconfig calculated a wrong value. The fix is to set all choice values when we read a defconfig files. conf_set_all_new_symbols() is refactored such that random choice values are now handled by a dedicated function. And new choice values are set by set_all_choice_values(). This was not the minimal fix, but the fix that resulted in the most readable code. Signed-off-by: Sam Ravnborg Reported-by: Arve Hjønnevåg Tested-by: Arve Hjønnevåg Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 102 +++++++++++++++++++++++++++++---------------- 1 file changed, 67 insertions(+), 35 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index e5d66e4f148..ac13f0ff8e8 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -918,13 +918,73 @@ void conf_set_changed_callback(void (*fn)(void)) conf_changed_callback = fn; } +static void randomize_choice_values(struct symbol *csym) +{ + struct property *prop; + struct symbol *sym; + struct expr *e; + int cnt, def; -void conf_set_all_new_symbols(enum conf_def_mode mode) + /* + * If choice is mod then we may have more items slected + * and if no then no-one. + * In both cases stop. + */ + if (csym->curr.tri != yes) + return; + + prop = sym_get_choice_prop(csym); + + /* count entries in choice block */ + cnt = 0; + expr_list_for_each_sym(prop->expr, e, sym) + cnt++; + + /* + * find a random value and set it to yes, + * set the rest to no so we have only one set + */ + def = (rand() % cnt); + + cnt = 0; + expr_list_for_each_sym(prop->expr, e, sym) { + if (def == cnt++) { + sym->def[S_DEF_USER].tri = yes; + csym->def[S_DEF_USER].val = sym; + } + else { + sym->def[S_DEF_USER].tri = no; + } + } + csym->flags |= SYMBOL_DEF_USER; + /* clear VALID to get value calculated */ + csym->flags &= ~(SYMBOL_VALID); +} + +static void set_all_choice_values(struct symbol *csym) { - struct symbol *sym, *csym; struct property *prop; + struct symbol *sym; struct expr *e; - int i, cnt, def; + + prop = sym_get_choice_prop(csym); + + /* + * Set all non-assinged choice values to no + */ + expr_list_for_each_sym(prop->expr, e, sym) { + if (!sym_has_value(sym)) + sym->def[S_DEF_USER].tri = no; + } + csym->flags |= SYMBOL_DEF_USER; + /* clear VALID to get value calculated */ + csym->flags &= ~(SYMBOL_VALID); +} + +void conf_set_all_new_symbols(enum conf_def_mode mode) +{ + struct symbol *sym, *csym; + int i, cnt; for_all_symbols(i, sym) { if (sym_has_value(sym)) @@ -960,8 +1020,6 @@ void conf_set_all_new_symbols(enum conf_def_mode mode) sym_clear_all_valid(); - if (mode != def_random) - return; /* * We have different type of choice blocks. * If curr.tri equal to mod then we can select several @@ -976,35 +1034,9 @@ void conf_set_all_new_symbols(enum conf_def_mode mode) continue; sym_calc_value(csym); - - if (csym->curr.tri != yes) - continue; - - prop = sym_get_choice_prop(csym); - - /* count entries in choice block */ - cnt = 0; - expr_list_for_each_sym(prop->expr, e, sym) - cnt++; - - /* - * find a random value and set it to yes, - * set the rest to no so we have only one set - */ - def = (rand() % cnt); - - cnt = 0; - expr_list_for_each_sym(prop->expr, e, sym) { - if (def == cnt++) { - sym->def[S_DEF_USER].tri = yes; - csym->def[S_DEF_USER].val = sym; - } - else { - sym->def[S_DEF_USER].tri = no; - } - } - csym->flags |= SYMBOL_DEF_USER; - /* clear VALID to get value calculated */ - csym->flags &= ~(SYMBOL_VALID); + if (mode == def_random) + randomize_choice_values(csym); + else + set_all_choice_values(csym); } } -- cgit v1.2.3-70-g09d2 From 465c6cca2668a2db2a4ffce3dca5714017873f2b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 6 Aug 2010 03:26:24 -0400 Subject: tracing: Extend recordmcount to better support Blackfin mcount The mcount call on Blackfin systems includes some stack manipulation around the actual call site, so extend the build time perl script to support this. This way we can avoid doing the calculation at runtime. Signed-off-by: Mike Frysinger LKML-Reference: <1281079584-21205-1-git-send-email-vapier@gentoo.org> Signed-off-by: Steven Rostedt --- scripts/recordmcount.pl | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index f3c9c0a90b9..2c56539e5da 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -159,6 +159,7 @@ my $section_regex; # Find the start of a section my $function_regex; # Find the name of a function # (return offset and func name) my $mcount_regex; # Find the call site to mcount (return offset) +my $mcount_adjust; # Address adjustment to mcount offset my $alignment; # The .align value to use for $mcount_section my $section_type; # Section header plus possible alignment command my $can_use_local = 0; # If we can use local function references @@ -213,6 +214,7 @@ $section_regex = "Disassembly of section\\s+(\\S+):"; $function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:"; $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$"; $section_type = '@progbits'; +$mcount_adjust = 0; $type = ".long"; if ($arch eq "x86_64") { @@ -351,6 +353,9 @@ if ($arch eq "x86_64") { } elsif ($arch eq "microblaze") { # Microblaze calls '_mcount' instead of plain 'mcount'. $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; +} elsif ($arch eq "blackfin") { + $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$"; + $mcount_adjust = -4; } else { die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD"; } @@ -511,7 +516,7 @@ while () { } # is this a call site to mcount? If so, record it to print later if ($text_found && /$mcount_regex/) { - push(@offsets, hex $1); + push(@offsets, (hex $1) + $mcount_adjust); } } -- cgit v1.2.3-70-g09d2 From 019fca84e7c4b94817abc77df9081ba208fcc46a Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 12 Aug 2010 16:54:47 +0100 Subject: MN10300: Permit .GCC-command-line sections Permit .GCC-command-line sections in modules. Otherwise modpost says things like: WARNING: drivers/mtd/chips/map_ram.o (.GCC-command-line): unexpected non-allocatable section. Did you forget to use "ax"/"aw" in a .S file? Note that for example contains section definitions for use in .S files. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- scripts/mod/modpost.c | 1 + 1 file changed, 1 insertion(+) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 7acbdd8fcae..253c107b9a9 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -790,6 +790,7 @@ static const char *section_white_list[] = { ".comment*", ".debug*", + ".GCC-command-line", /* mn10300 */ ".mdebug*", /* alpha, score, mips etc. */ ".pdr", /* alpha, score, mips etc. */ ".stab*", -- cgit v1.2.3-70-g09d2 From 866af407dad3f2202e5d5d717ebd6156ccc33cdd Mon Sep 17 00:00:00 2001 From: Andrej Gelenberg Date: Mon, 2 Aug 2010 11:59:31 +0200 Subject: nconfig: Fix segfault when menu is empty nconf crush with segfault if press right arrow in empty menu. Signed-off-by: Andrej Gelenberg Signed-off-by: Michal Marek --- scripts/kconfig/nconf.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 762caf80ce3..2ba71bcd38e 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -676,6 +676,8 @@ static void *item_data(void) struct mitem *mcur; cur = current_item(curses_menu); + if (!cur) + return NULL; mcur = (struct mitem *) item_userptr(cur); return mcur->usrptr; -- cgit v1.2.3-70-g09d2 From bf5e327a300a9ac959a89440e7c67dc89f3bd804 Mon Sep 17 00:00:00 2001 From: Jean Sacren Date: Wed, 4 Aug 2010 16:01:02 -0600 Subject: kconfig: Fix warning: ignoring return value of 'fwrite' This fix facilitates fwrite() in both confdata.c and expr.c, either it succeeds in writing, or an error occurs, or the end of file is reached. Signed-off-by: Jean Sacren Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 2 +- scripts/kconfig/expr.c | 2 +- scripts/kconfig/lkc.h | 7 +++++++ 3 files changed, 9 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index ac13f0ff8e8..c39327e60ea 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -412,7 +412,7 @@ static void conf_write_string(bool headerfile, const char *name, while (1) { l = strcspn(str, "\"\\"); if (l) { - fwrite(str, l, 1, out); + xfwrite(str, l, 1, out); str += l; } if (!*str) diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c index 8f18e37892c..330e7c0048a 100644 --- a/scripts/kconfig/expr.c +++ b/scripts/kconfig/expr.c @@ -1087,7 +1087,7 @@ void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char * static void expr_print_file_helper(void *data, struct symbol *sym, const char *str) { - fwrite(str, strlen(str), 1, data); + xfwrite(str, strlen(str), 1, data); } void expr_fprint(struct expr *e, FILE *out) diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 76db065ed72..2ac33f5d273 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -80,6 +80,13 @@ void sym_set_change_count(int count); void sym_add_change_count(int count); void conf_set_all_new_symbols(enum conf_def_mode mode); +/* confdata.c and expr.c */ +static inline void xfwrite(const void *str, size_t len, size_t count, FILE *out) +{ + if (fwrite(str, len, count, out) < count) + fprintf(stderr, "\nError in writing or end of file.\n"); +} + /* kconfig_load.c */ void kconfig_load(void); -- cgit v1.2.3-70-g09d2 From 4418a2b904805814bbd14b555d6add6a175f49f3 Mon Sep 17 00:00:00 2001 From: Jean Sacren Date: Wed, 4 Aug 2010 16:03:16 -0600 Subject: kconfig: Fix warning: ignoring return value of 'fgets' This fix facilitates fgets() either it returns on success or on error or when end of file occurs. Signed-off-by: Jean Sacren Signed-off-by: Michal Marek --- scripts/kconfig/conf.c | 15 +++++++++++++-- scripts/kconfig/lkc.h | 3 +++ 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 010600ef58c..4f0ed5b3a75 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -108,7 +108,7 @@ static int conf_askvalue(struct symbol *sym, const char *def) check_stdin(); case oldaskconfig: fflush(stdout); - fgets(line, 128, stdin); + xfgets(line, 128, stdin); return 1; default: break; @@ -306,7 +306,7 @@ static int conf_choice(struct menu *menu) check_stdin(); case oldaskconfig: fflush(stdout); - fgets(line, 128, stdin); + xfgets(line, 128, stdin); strip(line); if (line[0] == '?') { print_help(menu); @@ -644,3 +644,14 @@ int main(int ac, char **av) } return 0; } +/* + * Helper function to facilitate fgets() by Jean Sacren. + */ +void xfgets(str, size, in) + char *str; + int size; + FILE *in; +{ + if (fgets(str, size, in) == NULL) + fprintf(stderr, "\nError in reading or end of file.\n"); +} diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 2ac33f5d273..bdf71bd3141 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -72,6 +72,9 @@ void zconf_nextfile(const char *name); int zconf_lineno(void); char *zconf_curname(void); +/* conf.c */ +void xfgets(char *str, int size, FILE *in); + /* confdata.c */ const char *conf_get_configname(void); const char *conf_get_autoconfig_name(void); -- cgit v1.2.3-70-g09d2 From 55c640c3abff301eed5ee11c34a40bfe043c8c2d Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Thu, 22 Jul 2010 10:19:38 -0500 Subject: setlocalversion: fix version for untaged nontip mercurial revs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The manpage for cut says it will return all lines without the delimiter unless -s is specified. When I backed up my mecurial tree to generate modules, I found that the scm part of localversion was turning up blank. Signed-off-by: Milton Miller Cc: Michal Marek Cc: "Michał Górny" Signed-off-by: Michal Marek --- scripts/setlocalversion | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 64a9cb5556c..e90a91cc518 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -86,7 +86,7 @@ scm_version() # Check for mercurial and a mercurial repo. if hgid=`hg id 2>/dev/null`; then - tag=`printf '%s' "$hgid" | cut -d' ' -f2` + tag=`printf '%s' "$hgid" | cut -s -d' ' -f2` # Do we have an untagged version? if [ -z "$tag" -o "$tag" = tip ]; then -- cgit v1.2.3-70-g09d2 From 7cfddeef357aac78179ea804b11cffb5fbba8288 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 14 Aug 2010 10:22:58 +0200 Subject: kbuild: drop unifdef-y support unifdef-y is not used anymore - drop remaining references Signed-off-by: Sam Ravnborg --- Documentation/kbuild/makefiles.txt | 6 ------ scripts/Makefile.headersinst | 3 +-- 2 files changed, 1 insertion(+), 8 deletions(-) (limited to 'scripts') diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index c375313cb12..c787ae51212 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -45,7 +45,6 @@ This document describes the Linux kernel Makefiles. --- 7.1 header-y --- 7.2 objhdr-y --- 7.3 destination-y - --- 7.4 unifdef-y (deprecated) === 8 Kbuild Variables === 9 Makefile language @@ -1245,11 +1244,6 @@ See subsequent chapter for the syntax of the Kbuild file. will be located in the directory "include/linux" when exported. - --- 7.4 unifdef-y (deprecated) - - unifdef-y is deprecated. A direct replacement is header-y. - - === 8 Kbuild Variables The top Makefile exports the following variables: diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index 0fcd8383877..f89cb87f5c0 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -3,7 +3,6 @@ # # header-y - list files to be installed. They are preprocessed # to remove __KERNEL__ section of the file -# unifdef-y - Same as header-y. Obsolete # objhdr-y - Same as header-y but for generated files # # ========================================================================== @@ -20,7 +19,7 @@ include scripts/Kbuild.include install := $(INSTALL_HDR_PATH)/$(_dst) -header-y := $(sort $(header-y) $(unifdef-y)) +header-y := $(sort $(header-y)) subdirs := $(patsubst %/,%,$(filter %/, $(header-y))) header-y := $(filter-out %/, $(header-y)) -- cgit v1.2.3-70-g09d2 From 84062dd3a6a045395a43de1d9adc9b8eb2d1426e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 14 Aug 2010 23:22:16 +0200 Subject: kconfig: fix savedefconfig with choice marked optional savedefconfig failed to save the correct minimal config when it encountered a choice marked optional. Consider following minimal configuration: $cat Kconfig choice prompt "choice" optional config A bool "a" config B bool "b" endchoice $cat .config | grep -v ^# CONFIG_A=y $conf --savedefconfig=defconfig Kconfig would before this fix result in an empty file, because kconfig would assume that CONFIG_A=y is a default value. But because the choice is optional the default is that both A and B are =n. Fix so we handle optional choices correct. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index c39327e60ea..515253fe46c 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -497,7 +497,9 @@ int conf_write_defconfig(const char *filename) /* * If symbol is a choice value and equals to the * default for a choice - skip. - * But only if value is bool and equal to "y" . + * But only if value is bool and equal to "y" and + * choice is not "optional". + * (If choice is "optional" then all values can be "n") */ if (sym_is_choice_value(sym)) { struct symbol *cs; @@ -505,7 +507,7 @@ int conf_write_defconfig(const char *filename) cs = prop_get_symbol(sym_get_choice_prop(sym)); ds = sym_choice_default(cs); - if (sym == ds) { + if (!sym_is_optional(cs) && sym == ds) { if ((sym->type == S_BOOLEAN) && sym_get_tristate_value(sym) == yes) goto next_menu; -- cgit v1.2.3-70-g09d2 From 3643f849d7da5c12da589beb03c12303fe79b841 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 14 Aug 2010 14:40:00 +0200 Subject: kconfig: fix segfault when detecting recursive dependency Following sample Kconfig generated a segfault: config FOO bool select PERF_EVENTS if HAVE_HW_BREAKPOINT config PERF_EVENTS bool config HAVE_HW_BREAKPOINT bool depends on PERF_EVENTS Fix by reverting back to a valid property if there was no property on the stack of symbols. The above pattern were seen in sh Kconfig. A fix for the Kconfig file has been sent to the sh folks. Signed-off-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/symbol.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index e95718fea35..943712ca6c0 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -937,6 +937,8 @@ static void sym_check_print_recursive(struct symbol *last_sym) sym = stack->sym; next_sym = stack->next ? stack->next->sym : last_sym; prop = stack->prop; + if (prop == NULL) + prop = stack->sym->prop; /* for choice values find the menu entry (used below) */ if (sym_is_choice(sym) || sym_is_choice_value(sym)) { -- cgit v1.2.3-70-g09d2 From a72f3e2b82eb26f43bed1f83beeeb47830918811 Mon Sep 17 00:00:00 2001 From: Nir Tzachar Date: Sun, 8 Aug 2010 16:50:06 +0300 Subject: nconfig: add search support Remove the old hotkeys feature, and replace it by an interactive string search. From nconfig help: Searching: pressing '/' triggers interactive search mode. nconfig performs a case insensitive search for the string in the menu prompts (no regex support). Pressing the up/down keys highlights the previous/next matching item. Backspace removes one character from the match string. Pressing either '/' again or ESC exits search mode. All other keys behave normally. Miscellaneous other changes (including Rundy's and Justin's input). Signed-off-by: Nir Tzachar Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/nconf.c | 365 ++++++++++++++++++++++++-------------------- scripts/kconfig/nconf.gui.c | 20 +-- scripts/kconfig/nconf.h | 3 +- 3 files changed, 208 insertions(+), 180 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 2ba71bcd38e..18a215de9f3 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -5,9 +5,12 @@ * Derived from menuconfig. * */ +#define _GNU_SOURCE +#include #define LKC_DIRECT_LINK #include "lkc.h" #include "nconf.h" +#include static const char nconf_readme[] = N_( "Overview\n" @@ -23,7 +26,7 @@ static const char nconf_readme[] = N_( " < > can be built in, modularized or removed\n" " { } can be built in or modularized (selected by other feature)\n" " - - are selected by other feature,\n" -" XXX cannot be selected. use Symbol Info to find out why,\n" +" XXX cannot be selected. Use Symbol Info to find out why,\n" "while *, M or whitespace inside braces means to build in, build as\n" "a module or to exclude the feature respectively.\n" "\n" @@ -41,9 +44,13 @@ static const char nconf_readme[] = N_( " pressing of . Use or to go back.\n" " Submenus are designated by \"--->\".\n" "\n" -" Shortcut: Press the option's highlighted letter (hotkey).\n" -" Pressing a hotkey more than once will sequence\n" -" through all visible items which use that hotkey.\n" +" Searching: pressing '/' triggers interactive search mode.\n" +" nconfig performs a case insensitive search for the string\n" +" in the menu prompts (no regex support).\n" +" Pressing the up/down keys highlights the previous/next\n" +" matching item. Backspace removes one character from the\n" +" match string. Pressing either '/' again or ESC exits\n" +" search mode. All other keys behave normally.\n" "\n" " You may also use the and keys to scroll\n" " unseen options into view.\n" @@ -141,21 +148,21 @@ menu_no_f_instructions[] = N_( " or selects submenus --->.\n" " Capital Letters are hotkeys.\n" " Pressing includes, excludes, modularizes features.\n" -" Pressing SpaceBar toggles between the above options\n" -" Press or to go back one menu, \n" +" Pressing SpaceBar toggles between the above options.\n" +" Press or to go back one menu,\n" " or for Help, for Search.\n" -" <1> is interchangable with , <2> with , etc.\n" +" <1> is interchangeable with , <2> with , etc.\n" " Legend: [*] built-in [ ] excluded module < > module capable.\n" -" always leaves the current window\n"), +" always leaves the current window.\n"), menu_instructions[] = N_( " Arrow keys navigate the menu.\n" " or selects submenus --->.\n" " Capital Letters are hotkeys.\n" " Pressing includes, excludes, modularizes features.\n" " Pressing SpaceBar toggles between the above options\n" -" Press , or to go back one menu, \n" +" Press , or to go back one menu,\n" " , or for Help, for Search.\n" -" <1> is interchangable with , <2> with , etc.\n" +" <1> is interchangeable with , <2> with , etc.\n" " Legend: [*] built-in [ ] excluded module < > module capable.\n" " always leaves the current window\n"), radiolist_instructions[] = N_( @@ -252,7 +259,6 @@ struct mitem { char str[256]; char tag; void *usrptr; - int is_hot; int is_visible; }; @@ -275,14 +281,6 @@ static int items_num; static int global_exit; /* the currently selected button */ const char *current_instructions = menu_instructions; -/* this array is used to implement hot keys. it is updated in item_make and - * resetted in clean_items. It would be better to use a hash, but lets keep it - * simple... */ -#define MAX_SAME_KEY MAX_MENU_ITEMS -struct { - int count; - int ptrs[MAX_MENU_ITEMS]; -} hotkeys[1<<(sizeof(char)*8)]; static void conf(struct menu *menu); static void conf_choice(struct menu *menu); @@ -292,6 +290,7 @@ static void conf_save(void); static void show_help(struct menu *menu); static int do_exit(void); static void setup_windows(void); +static void search_conf(void); typedef void (*function_key_handler_t)(int *key, struct menu *menu); static void handle_f1(int *key, struct menu *current_item); @@ -302,6 +301,7 @@ static void handle_f5(int *key, struct menu *current_item); static void handle_f6(int *key, struct menu *current_item); static void handle_f7(int *key, struct menu *current_item); static void handle_f8(int *key, struct menu *current_item); +static void handle_f9(int *key, struct menu *current_item); struct function_keys { const char *key_str; @@ -310,7 +310,7 @@ struct function_keys { function_key_handler_t handler; }; -static const int function_keys_num = 8; +static const int function_keys_num = 9; struct function_keys function_keys[] = { { .key_str = "F1", @@ -320,13 +320,13 @@ struct function_keys function_keys[] = { }, { .key_str = "F2", - .func = "Symbol Info", + .func = "Sym Info", .key = F_SYMBOL, .handler = handle_f2, }, { .key_str = "F3", - .func = "Instructions", + .func = "Insts", .key = F_INSTS, .handler = handle_f3, }, @@ -356,9 +356,15 @@ struct function_keys function_keys[] = { }, { .key_str = "F8", + .func = "Sym Search", + .key = F_SEARCH, + .handler = handle_f8, + }, + { + .key_str = "F9", .func = "Exit", .key = F_EXIT, - .handler = handle_f8, + .handler = handle_f9, }, }; @@ -444,8 +450,15 @@ static void handle_f7(int *key, struct menu *current_item) return; } -/* exit */ +/* search */ static void handle_f8(int *key, struct menu *current_item) +{ + search_conf(); + return; +} + +/* exit */ +static void handle_f9(int *key, struct menu *current_item) { do_exit(); return; @@ -479,110 +492,44 @@ static void clean_items(void) free_item(curses_menu_items[i]); bzero(curses_menu_items, sizeof(curses_menu_items)); bzero(k_menu_items, sizeof(k_menu_items)); - bzero(hotkeys, sizeof(hotkeys)); items_num = 0; } -/* return the index of the next hot item, or -1 if no such item exists */ -static int get_next_hot(int c) -{ - static int hot_index; - static int hot_char; - - if (c < 0 || c > 255 || hotkeys[c].count <= 0) - return -1; - - if (hot_char == c) { - hot_index = (hot_index+1)%hotkeys[c].count; - return hotkeys[c].ptrs[hot_index]; - } else { - hot_char = c; - hot_index = 0; - return hotkeys[c].ptrs[0]; - } -} - -/* can the char c be a hot key? no, if c is a common shortcut used elsewhere */ -static int canbhot(char c) -{ - c = tolower(c); - return isalnum(c) && c != 'y' && c != 'm' && c != 'h' && - c != 'n' && c != '?'; -} - -/* check if str already contains a hot key. */ -static int is_hot(int index) -{ - return k_menu_items[index].is_hot; -} +typedef enum {MATCH_TINKER_PATTERN_UP, MATCH_TINKER_PATTERN_DOWN, + FIND_NEXT_MATCH_DOWN, FIND_NEXT_MATCH_UP} match_f; -/* find the first possible hot key, and mark it. - * index is the index of the item in the menu - * return 0 on success*/ -static int make_hot(char *dest, int len, const char *org, int index) +/* return the index of the matched item, or -1 if no such item exists */ +static int get_mext_match(const char *match_str, match_f flag) { - int position = -1; - int i; - int tmp; - int c; - int org_len = strlen(org); - - if (org == NULL || is_hot(index)) - return 1; - - /* make sure not to make hot keys out of markers. - * find where to start looking for a hot key - */ - i = 0; - /* skip white space */ - while (i < org_len && org[i] == ' ') - i++; - if (i == org_len) - return -1; - /* if encountering '(' or '<' or '[', find the match and look from there - **/ - if (org[i] == '[' || org[i] == '<' || org[i] == '(') { - i++; - for (; i < org_len; i++) - if (org[i] == ']' || org[i] == '>' || org[i] == ')') - break; - } - if (i == org_len) - return -1; - for (; i < org_len; i++) { - if (canbhot(org[i]) && org[i-1] != '<' && org[i-1] != '(') { - position = i; - break; - } + int match_start = item_index(current_item(curses_menu)); + int index; + + if (flag == FIND_NEXT_MATCH_DOWN) + ++match_start; + else if (flag == FIND_NEXT_MATCH_UP) + --match_start; + + index = match_start; + index = (index + items_num) % items_num; + while (true) { + char *str = k_menu_items[index].str; + if (strcasestr(str, match_str) != 0) + return index; + if (flag == FIND_NEXT_MATCH_UP || + flag == MATCH_TINKER_PATTERN_UP) + --index; + else + ++index; + index = (index + items_num) % items_num; + if (index == match_start) + return -1; } - if (position == -1) - return 1; - - /* ok, char at org[position] should be a hot key to this item */ - c = tolower(org[position]); - tmp = hotkeys[c].count; - hotkeys[c].ptrs[tmp] = index; - hotkeys[c].count++; - /* - snprintf(dest, len, "%.*s(%c)%s", position, org, org[position], - &org[position+1]); - */ - /* make org[position] uppercase, and all leading letter small case */ - strncpy(dest, org, len); - for (i = 0; i < position; i++) - dest[i] = tolower(dest[i]); - dest[position] = toupper(dest[position]); - k_menu_items[index].is_hot = 1; - return 0; } -/* Make a new item. Add a hotkey mark in the first possible letter. - * As ncurses does not allow any attributes inside menue item, we mark the - * hot key as the first capitalized letter in the string */ +/* Make a new item. */ static void item_make(struct menu *menu, char tag, const char *fmt, ...) { va_list ap; - char tmp_str[256]; if (items_num > MAX_MENU_ITEMS-1) return; @@ -597,16 +544,13 @@ static void item_make(struct menu *menu, char tag, const char *fmt, ...) k_menu_items[items_num].is_visible = 1; va_start(ap, fmt); - vsnprintf(tmp_str, sizeof(tmp_str), fmt, ap); - if (!k_menu_items[items_num].is_visible) - memcpy(tmp_str, "XXX", 3); + vsnprintf(k_menu_items[items_num].str, + sizeof(k_menu_items[items_num].str), + fmt, ap); va_end(ap); - if (make_hot( - k_menu_items[items_num].str, - sizeof(k_menu_items[items_num].str), tmp_str, items_num) != 0) - strncpy(k_menu_items[items_num].str, - tmp_str, - sizeof(k_menu_items[items_num].str)); + + if (!k_menu_items[items_num].is_visible) + memcpy(k_menu_items[items_num].str, "XXX", 3); curses_menu_items[items_num] = new_item( k_menu_items[items_num].str, @@ -638,11 +582,9 @@ static void item_add_str(const char *fmt, ...) va_end(ap); snprintf(tmp_str, sizeof(tmp_str), "%s%s", k_menu_items[index].str, new_str); - if (make_hot(k_menu_items[index].str, - sizeof(k_menu_items[index].str), tmp_str, index) != 0) - strncpy(k_menu_items[index].str, - tmp_str, - sizeof(k_menu_items[index].str)); + strncpy(k_menu_items[index].str, + tmp_str, + sizeof(k_menu_items[index].str)); free_item(curses_menu_items[index]); curses_menu_items[index] = new_item( @@ -1027,23 +969,18 @@ static void reset_menu(void) static void center_item(int selected_index, int *last_top_row) { int toprow; - int maxy, maxx; - scale_menu(curses_menu, &maxy, &maxx); set_top_row(curses_menu, *last_top_row); toprow = top_row(curses_menu); - if (selected_index >= toprow && selected_index < toprow+maxy) { - /* we can only move the selected item. no need to scroll */ - set_current_item(curses_menu, - curses_menu_items[selected_index]); - } else { - toprow = max(selected_index-maxy/2, 0); - if (toprow >= item_count(curses_menu)-maxy) + if (selected_index < toprow || + selected_index >= toprow+mwin_max_lines) { + toprow = max(selected_index-mwin_max_lines/2, 0); + if (toprow >= item_count(curses_menu)-mwin_max_lines) toprow = item_count(curses_menu)-mwin_max_lines; set_top_row(curses_menu, toprow); - set_current_item(curses_menu, - curses_menu_items[selected_index]); } + set_current_item(curses_menu, + curses_menu_items[selected_index]); *last_top_row = toprow; post_menu(curses_menu); refresh_all_windows(main_window); @@ -1075,7 +1012,7 @@ static void show_menu(const char *prompt, const char *instructions, /* position the menu at the middle of the screen */ scale_menu(curses_menu, &maxy, &maxx); maxx = min(maxx, mwin_max_cols-2); - maxy = mwin_max_lines-2; + maxy = mwin_max_lines; menu_window = derwin(main_window, maxy, maxx, @@ -1099,10 +1036,77 @@ static void show_menu(const char *prompt, const char *instructions, refresh_all_windows(main_window); } +static void adj_match_dir(match_f *match_direction) +{ + if (*match_direction == FIND_NEXT_MATCH_DOWN) + *match_direction = + MATCH_TINKER_PATTERN_DOWN; + else if (*match_direction == FIND_NEXT_MATCH_UP) + *match_direction = + MATCH_TINKER_PATTERN_UP; + /* else, do no change.. */ +} -static void conf(struct menu *menu) +struct match_state { + int in_search; + match_f match_direction; char pattern[256]; +}; + +/* Return 0 means I have handled the key. In such a case, ans should hold the + * item to center, or -1 otherwise. + * Else return -1 . + */ +static int do_match(int key, struct match_state *state, int *ans) +{ + char c = (char) key; + int terminate_search = 0; + *ans = -1; + if (key == '/' || (state->in_search && key == 27)) { + move(0, 0); + refresh(); + clrtoeol(); + state->in_search = 1-state->in_search; + bzero(state->pattern, sizeof(state->pattern)); + state->match_direction = MATCH_TINKER_PATTERN_DOWN; + return 0; + } else if (!state->in_search) + return 1; + + if (isalnum(c) || isgraph(c) || c == ' ') { + state->pattern[strlen(state->pattern)] = c; + state->pattern[strlen(state->pattern)] = '\0'; + adj_match_dir(&state->match_direction); + *ans = get_mext_match(state->pattern, + state->match_direction); + } else if (key == KEY_DOWN) { + state->match_direction = FIND_NEXT_MATCH_DOWN; + *ans = get_mext_match(state->pattern, + state->match_direction); + } else if (key == KEY_UP) { + state->match_direction = FIND_NEXT_MATCH_UP; + *ans = get_mext_match(state->pattern, + state->match_direction); + } else if (key == KEY_BACKSPACE || key == 127) { + state->pattern[strlen(state->pattern)-1] = '\0'; + adj_match_dir(&state->match_direction); + } else + terminate_search = 1; + + if (terminate_search) { + state->in_search = 0; + bzero(state->pattern, sizeof(state->pattern)); + move(0, 0); + refresh(); + clrtoeol(); + return -1; + } + return 0; +} + +static void conf(struct menu *menu) +{ struct menu *submenu = 0; const char *prompt = menu_get_prompt(menu); struct symbol *sym; @@ -1110,8 +1114,11 @@ static void conf(struct menu *menu) int res; int current_index = 0; int last_top_row = 0; - - bzero(pattern, sizeof(pattern)); + struct match_state match_state = { + .in_search = 0, + .match_direction = MATCH_TINKER_PATTERN_DOWN, + .pattern = "", + }; while (!global_exit) { reset_menu(); @@ -1124,7 +1131,22 @@ static void conf(struct menu *menu) _(menu_instructions), current_index, &last_top_row); keypad((menu_win(curses_menu)), TRUE); - while (!global_exit && (res = wgetch(menu_win(curses_menu)))) { + while (!global_exit) { + if (match_state.in_search) { + mvprintw(0, 0, + "searching: %s", match_state.pattern); + clrtoeol(); + } + refresh_all_windows(main_window); + res = wgetch(menu_win(curses_menu)); + if (!res) + break; + if (do_match(res, &match_state, ¤t_index) == 0) { + if (current_index != -1) + center_item(current_index, + &last_top_row); + continue; + } if (process_special_keys(&res, (struct menu *) item_data())) break; @@ -1155,19 +1177,13 @@ static void conf(struct menu *menu) if (res == 10 || res == 27 || res == 32 || res == 'n' || res == 'y' || res == KEY_LEFT || res == KEY_RIGHT || - res == 'm' || res == '/') + res == 'm') break; - else if (canbhot(res)) { - /* check for hot keys: */ - int tmp = get_next_hot(res); - if (tmp != -1) - center_item(tmp, &last_top_row); - } refresh_all_windows(main_window); } refresh_all_windows(main_window); - /* if ESC or left*/ + /* if ESC or left*/ if (res == 27 || (menu != &rootmenu && res == KEY_LEFT)) break; @@ -1235,9 +1251,6 @@ static void conf(struct menu *menu) if (item_is_tag('t')) sym_set_tristate_value(sym, mod); break; - case '/': - search_conf(); - break; } } } @@ -1268,6 +1281,11 @@ static void conf_choice(struct menu *menu) int selected_index = 0; int last_top_row = 0; int res, i = 0; + struct match_state match_state = { + .in_search = 0, + .match_direction = MATCH_TINKER_PATTERN_DOWN, + .pattern = "", + }; active = sym_get_choice_value(menu->sym); /* this is mostly duplicated from the conf() function. */ @@ -1294,7 +1312,22 @@ static void conf_choice(struct menu *menu) _(radiolist_instructions), selected_index, &last_top_row); - while (!global_exit && (res = wgetch(menu_win(curses_menu)))) { + while (!global_exit) { + if (match_state.in_search) { + mvprintw(0, 0, "searching: %s", + match_state.pattern); + clrtoeol(); + } + refresh_all_windows(main_window); + res = wgetch(menu_win(curses_menu)); + if (!res) + break; + if (do_match(res, &match_state, &selected_index) == 0) { + if (selected_index != -1) + center_item(selected_index, + &last_top_row); + continue; + } if (process_special_keys( &res, (struct menu *) item_data())) @@ -1324,13 +1357,8 @@ static void conf_choice(struct menu *menu) break; } if (res == 10 || res == 27 || res == ' ' || - res == KEY_LEFT) + res == KEY_LEFT){ break; - else if (canbhot(res)) { - /* check for hot keys: */ - int tmp = get_next_hot(res); - if (tmp != -1) - center_item(tmp, &last_top_row); } refresh_all_windows(main_window); } @@ -1485,7 +1513,7 @@ void setup_windows(void) /* set up the menu and menu window */ main_window = newwin(LINES-2, COLS-2, 2, 1); keypad(main_window, TRUE); - mwin_max_lines = LINES-6; + mwin_max_lines = LINES-7; mwin_max_cols = COLS-6; /* panels order is from bottom to top */ @@ -1532,9 +1560,10 @@ int main(int ac, char **av) /* set btns menu */ curses_menu = new_menu(curses_menu_items); menu_opts_off(curses_menu, O_SHOWDESC); - menu_opts_off(curses_menu, O_SHOWMATCH); + menu_opts_on(curses_menu, O_SHOWMATCH); menu_opts_on(curses_menu, O_ONEVALUE); menu_opts_on(curses_menu, O_NONCYCLIC); + menu_opts_on(curses_menu, O_IGNORECASE); set_menu_mark(curses_menu, " "); set_menu_fore(curses_menu, attributes[MAIN_MENU_FORE]); set_menu_back(curses_menu, attributes[MAIN_MENU_BACK]); @@ -1550,8 +1579,6 @@ int main(int ac, char **av) _(menu_no_f_instructions)); } - - /* do the work */ while (!global_exit) { conf(&rootmenu); diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c index a9d9344e136..d963071e48d 100644 --- a/scripts/kconfig/nconf.gui.c +++ b/scripts/kconfig/nconf.gui.c @@ -167,7 +167,7 @@ void print_in_middle(WINDOW *win, length = strlen(string); temp = (width - length) / 2; x = startx + (int)temp; - wattrset(win, color); + (void) wattrset(win, color); mvwprintw(win, y, x, "%s", string); refresh(); } @@ -297,11 +297,11 @@ int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...) set_menu_fore(menu, attributes[DIALOG_MENU_FORE]); set_menu_back(menu, attributes[DIALOG_MENU_BACK]); - wattrset(win, attributes[DIALOG_BOX]); + (void) wattrset(win, attributes[DIALOG_BOX]); box(win, 0, 0); /* print message */ - wattrset(msg_win, attributes[DIALOG_TEXT]); + (void) wattrset(msg_win, attributes[DIALOG_TEXT]); fill_window(msg_win, msg); set_menu_win(menu, win); @@ -392,16 +392,16 @@ int dialog_inputbox(WINDOW *main_window, form_win = derwin(win, 1, prompt_width, prompt_lines+3, 2); keypad(form_win, TRUE); - wattrset(form_win, attributes[INPUT_FIELD]); + (void) wattrset(form_win, attributes[INPUT_FIELD]); - wattrset(win, attributes[INPUT_BOX]); + (void) wattrset(win, attributes[INPUT_BOX]); box(win, 0, 0); - wattrset(win, attributes[INPUT_HEADING]); + (void) wattrset(win, attributes[INPUT_HEADING]); if (title) mvwprintw(win, 0, 3, "%s", title); /* print message */ - wattrset(prompt_win, attributes[INPUT_TEXT]); + (void) wattrset(prompt_win, attributes[INPUT_TEXT]); fill_window(prompt_win, prompt); mvwprintw(form_win, 0, 0, "%*s", prompt_width, " "); @@ -531,7 +531,7 @@ void show_scroll_win(WINDOW *main_window, /* create the pad */ pad = newpad(total_lines+10, total_cols+10); - wattrset(pad, attributes[SCROLLWIN_TEXT]); + (void) wattrset(pad, attributes[SCROLLWIN_TEXT]); fill_window(pad, text); win_lines = min(total_lines+4, LINES-2); @@ -546,9 +546,9 @@ void show_scroll_win(WINDOW *main_window, win = newwin(win_lines, win_cols, y, x); keypad(win, TRUE); /* show the help in the help window, and show the help panel */ - wattrset(win, attributes[SCROLLWIN_BOX]); + (void) wattrset(win, attributes[SCROLLWIN_BOX]); box(win, 0, 0); - wattrset(win, attributes[SCROLLWIN_HEADING]); + (void) wattrset(win, attributes[SCROLLWIN_HEADING]); mvwprintw(win, 0, 3, " %s ", title); panel = new_panel(win); diff --git a/scripts/kconfig/nconf.h b/scripts/kconfig/nconf.h index fb429666600..58fbda8fc0d 100644 --- a/scripts/kconfig/nconf.h +++ b/scripts/kconfig/nconf.h @@ -69,7 +69,8 @@ typedef enum { F_BACK = 5, F_SAVE = 6, F_LOAD = 7, - F_EXIT = 8 + F_SEARCH = 8, + F_EXIT = 9, } function_key; void set_colors(void); -- cgit v1.2.3-70-g09d2 From 94bedeca77bf79a81952ed4c3abb8c1cce4c85dd Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Tue, 17 Aug 2010 01:40:20 -0400 Subject: kbuild: confdata.c explicitly reference errno, thus need This fixes: % gmake LKC_GENPARSER=1 menuconfig [...] scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function) scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once scripts/kconfig/confdata.c:739: error: for each function it appears in.) scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function) triggered on NetBSD. Signed-off-by: Arnaud Lacombe Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 1 + 1 file changed, 1 insertion(+) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 515253fe46c..dc11d51bd8b 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -5,6 +5,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 42368c37fbd51f7b478d041ae55c5df000897158 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 17 Aug 2010 10:21:19 +0200 Subject: kconfig: Allow frontends to display messages themselves Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 35 +++++++++++++++++++++++++------ scripts/kconfig/lkc_proto.h | 2 ++ scripts/kconfig/nconf.c | 51 ++++++++------------------------------------- 3 files changed, 40 insertions(+), 48 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index dc11d51bd8b..c07060ab782 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -19,6 +19,9 @@ static void conf_warning(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); +static void conf_message(const char *fmt, ...) + __attribute__ ((format (printf, 1, 2))); + static const char *conf_filename; static int conf_lineno, conf_warnings, conf_unsaved; @@ -35,6 +38,29 @@ static void conf_warning(const char *fmt, ...) conf_warnings++; } +static void conf_default_message_callback(const char *fmt, va_list ap) +{ + printf("#\n# "); + vprintf(fmt, ap); + printf("\n#\n"); +} + +static void (*conf_message_callback) (const char *fmt, va_list ap) = + conf_default_message_callback; +void conf_set_message_callback(void (*fn) (const char *fmt, va_list ap)) +{ + conf_message_callback = fn; +} + +static void conf_message(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + if (conf_message_callback) + conf_message_callback(fmt, ap); +} + const char *conf_get_configname(void) { char *name = getenv("KCONFIG_CONFIG"); @@ -184,9 +210,8 @@ int conf_read_simple(const char *name, int def) name = conf_expand_value(prop->expr->left.sym->name); in = zconf_fopen(name); if (in) { - printf(_("#\n" - "# using defaults found in %s\n" - "#\n"), name); + conf_message(_("using defaults found in %s"), + name); goto load; } } @@ -651,9 +676,7 @@ next: return 1; } - printf(_("#\n" - "# configuration written to %s\n" - "#\n"), newname); + conf_message(_("configuration written to %s"), newname); sym_set_change_count(0); diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h index 9a948c9ce44..481d4849d0f 100644 --- a/scripts/kconfig/lkc_proto.h +++ b/scripts/kconfig/lkc_proto.h @@ -1,3 +1,4 @@ +#include /* confdata.c */ P(conf_parse,void,(const char *name)); @@ -8,6 +9,7 @@ P(conf_write,int,(const char *name)); P(conf_write_autoconf,int,(void)); P(conf_get_changed,bool,(void)); P(conf_set_changed_callback, void,(void (*fn)(void))); +P(conf_set_message_callback, void,(void (*fn)(const char *fmt, va_list ap))); /* menu.c */ P(rootmenu,struct menu,); diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 18a215de9f3..16233a9382c 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -651,25 +651,6 @@ static const char *set_config_filename(const char *config_filename) return menu_backtitle; } -/* command = 0 is supress, 1 is restore */ -static void supress_stdout(int command) -{ - static FILE *org_stdout; - static FILE *org_stderr; - - if (command == 0) { - org_stdout = stdout; - org_stderr = stderr; - stdout = fopen("/dev/null", "a"); - stderr = fopen("/dev/null", "a"); - } else { - fclose(stdout); - fclose(stderr); - stdout = org_stdout; - stderr = org_stderr; - } -} - /* return = 0 means we are successful. * -1 means go on doing what you were doing */ @@ -695,9 +676,7 @@ static int do_exit(void) /* if we got here, the user really wants to exit */ switch (res) { case 0: - supress_stdout(0); res = conf_write(filename); - supress_stdout(1); if (res) btn_dialog( main_window, @@ -707,19 +686,6 @@ static int do_exit(void) "changes were NOT saved."), 1, ""); - else { - char buf[1024]; - snprintf(buf, 1024, - _("Configuration written to %s\n" - "End of Linux kernel configuration.\n" - "Execute 'make' to build the kernel or try" - " 'make help'."), filename); - btn_dialog( - main_window, - buf, - 1, - ""); - } break; default: btn_dialog( @@ -1255,6 +1221,14 @@ static void conf(struct menu *menu) } } +static void conf_message_callback(const char *fmt, va_list ap) +{ + char buf[1024]; + + vsnprintf(buf, sizeof(buf), fmt, ap); + btn_dialog(main_window, buf, 1, ""); +} + static void show_help(struct menu *menu) { struct gstr help = str_new(); @@ -1477,16 +1451,8 @@ static void conf_save(void) case 0: if (!dialog_input_result[0]) return; - supress_stdout(0); res = conf_write(dialog_input_result); - supress_stdout(1); if (!res) { - char buf[1024]; - sprintf(buf, "%s %s", - _("configuration file saved to: "), - dialog_input_result); - btn_dialog(main_window, - buf, 1, ""); set_config_filename(dialog_input_result); return; } @@ -1579,6 +1545,7 @@ int main(int ac, char **av) _(menu_no_f_instructions)); } + conf_set_message_callback(conf_message_callback); /* do the work */ while (!global_exit) { conf(&rootmenu); -- cgit v1.2.3-70-g09d2 From 7080e47bb2783c04982526068204c1c8fc2c4c38 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 16 Aug 2010 00:19:04 -0400 Subject: kbuild: don't include `check-lxdialog' ldflags in global HOST_LOADLIBES On BSD systems, `check-lxdialog' would select -lcurses as the default curses library which would conflict with -lncurses at runtime: curses' compatible symbols are getting handled by the system's curses library while the ncurses-specific symbols are getting handled by the ports' ncurses. This fixes `nconf' segmentation fault on these systems. Signed-off-by: Arnaud Lacombe Signed-off-by: Michal Marek --- scripts/kconfig/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index de934def410..7522a8bc055 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -146,7 +146,6 @@ check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh # Use recursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) -HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) HOST_EXTRACFLAGS += -DLOCALE @@ -208,7 +207,7 @@ clean-files += config.pot linux.pot PHONY += $(obj)/dochecklxdialog $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog $(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) + $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) always := dochecklxdialog @@ -226,6 +225,8 @@ HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ -D LKC_DIRECT_LINK +HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) + HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses $(obj)/qconf.o: $(obj)/.tmp_qtcheck -- cgit v1.2.3-70-g09d2 From c24035b9edad6164ddc12e88444acea741d5e309 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 16 Aug 2010 00:19:06 -0400 Subject: kbuild: fix typo Signed-off-by: Arnaud Lacombe Signed-off-by: Michal Marek --- scripts/kconfig/nconf.gui.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c index d963071e48d..f8137b3a538 100644 --- a/scripts/kconfig/nconf.gui.c +++ b/scripts/kconfig/nconf.gui.c @@ -137,7 +137,7 @@ void set_colors() if (has_colors()) { normal_color_theme(); } else { - /* give deafults */ + /* give defaults */ no_colors_theme(); } } -- cgit v1.2.3-70-g09d2 From 3c955b407a084810f57260d61548cc92c14bc627 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 16 Aug 2010 11:58:58 +0100 Subject: fixes for using make 3.82 It doesn't like pattern and explicit rules to be on the same line, and it seems to be more picky when matching file (or really directory) names with different numbers of trailing slashes. Signed-off-by: Jan Beulich Acked-by: Sam Ravnborg Andrew Benton Cc: Signed-off-by: Michal Marek --- firmware/Makefile | 2 +- scripts/mkmakefile | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/firmware/Makefile b/firmware/Makefile index 020e629a615..99955ed8b19 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -142,7 +142,7 @@ fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) # Directories which we _might_ need to create, so we have a rule for them. -firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all)))) +firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all)))) quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@) cmd_mkdir = mkdir -p $@ diff --git a/scripts/mkmakefile b/scripts/mkmakefile index 67d59c7a18d..5325423ceab 100644 --- a/scripts/mkmakefile +++ b/scripts/mkmakefile @@ -44,7 +44,9 @@ all: Makefile:; -\$(all) %/: all +\$(all): all @: +%/: all + @: EOF -- cgit v1.2.3-70-g09d2 From 8558f59edf935cf5ee5ffc29a9e9458fd9a71be1 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 16 Aug 2010 17:09:52 +0200 Subject: setlocalversion: Ignote SCMs above the linux source tree Dan McGee writes: > Note that when in git, you get the appended "+" sign. If > LOCALVERSION_AUTO is set, you will get something like > "eee-gb01b08c-dirty" (whereas the copy of the tree in /tmp still > returns "eee"). It doesn't matter whether the working tree is dirty or > clean. > > Is there a way to disable this? I'm building from a clean tarball that > just happens to be unpacked inside a git repository. One would think > setting LOCALVERSION_AUTO to false would do it, but no such luck... Fix this by checking if the kernel source tree is the root of the git or hg repository. No fix for svn: If the kernel source is not tracked in the svn repository, it works as expected, otherwise determining the 'repository root' is not really a defined task. Reported-and-tested-by: Dan McGee Signed-off-by: Michal Marek --- scripts/setlocalversion | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/setlocalversion b/scripts/setlocalversion index e90a91cc518..057b6b3c5df 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -43,7 +43,7 @@ scm_version() fi # Check for git and a git repo. - if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then + if test -d .git && head=`git rev-parse --verify --short HEAD 2>/dev/null`; then # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore # it, because this version is defined in the top level Makefile. @@ -85,7 +85,7 @@ scm_version() fi # Check for mercurial and a mercurial repo. - if hgid=`hg id 2>/dev/null`; then + if test -d .hg && hgid=`hg id 2>/dev/null`; then tag=`printf '%s' "$hgid" | cut -s -d' ' -f2` # Do we have an untagged version? -- cgit v1.2.3-70-g09d2 From cbcf14a942eb06d031628046739b983e84b383bf Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 17 Aug 2010 13:36:40 +0300 Subject: scripts/mod/modpost.c: fix commentary accordingly to last changes The last commits 37ed19d5cce35a40d3913cf9aa208ce9f60db3d7 5003bab82d56754b27be01eef24495a02e00039d have introduced new behaviour of sec2annotation() method. However, the commentary inside the method was left as before. Let's fix it accordingly. Signed-off-by: Andy Shevchenko Cc: Rusty Russell Cc: Andrew Morton Acked-by: WANG Cong Signed-off-by: Michal Marek --- scripts/mod/modpost.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index c827309c29c..859bee4972e 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1193,6 +1193,9 @@ static Elf_Sym *find_elf_symbol2(struct elf_info *elf, Elf_Addr addr, * .cpuinit.data => __cpudata * .memexitconst => __memconst * etc. + * + * The memory of returned value has been allocated on a heap. The user of this + * method should free it after usage. */ static char *sec2annotation(const char *s) { @@ -1215,7 +1218,7 @@ static char *sec2annotation(const char *s) strcat(p, "data "); else strcat(p, " "); - return r; /* we leak her but we do not care */ + return r; } else { return ""; } -- cgit v1.2.3-70-g09d2 From 9ba9568259f71bc848ac460bc616ce9640634693 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sun, 22 Aug 2010 20:03:06 -0400 Subject: kbuild: don't overwrite HOST_EXTRACFLAGS This might be used by the user to specify extra arguments for the host compiler. Signed-off-by: Arnaud Lacombe Signed-off-by: Michal Marek --- scripts/kconfig/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 7522a8bc055..06c1c2f80bb 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -145,10 +145,8 @@ check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh # Use recursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) - -HOST_EXTRACFLAGS += -DLOCALE - +HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ + -DLOCALE # =========================================================================== # Shared Makefile for the various kconfig executables: -- cgit v1.2.3-70-g09d2 From c75b81bffa0a9493a24ae61d0c52f85e4043c183 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:38:55 +0200 Subject: Coccinelle: Add null/eno.cocci The various basic memory allocation functions don't return ERR_PTR Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/null/eno.cocci | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 scripts/coccinelle/null/eno.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/null/eno.cocci b/scripts/coccinelle/null/eno.cocci new file mode 100644 index 00000000000..4c9c52b9c41 --- /dev/null +++ b/scripts/coccinelle/null/eno.cocci @@ -0,0 +1,20 @@ +/// The various basic memory allocation functions don't return ERR_PTR +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@@ +expression x,E; +@@ + +x = \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...) +... when != x = E +- IS_ERR(x) ++ !x -- cgit v1.2.3-70-g09d2 From 2e1e1605fc60b3fcf1e9382729a92fc305727952 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:38:56 +0200 Subject: Coccinelle: Add null/kmerr.cocci This semantic patch looks for kmalloc etc that are not followed by a NULL check. It only gives a report in the case where there is some error handling code later in the function, which may be helpful in determining what the error handling code for the call to kmalloc etc should be. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/null/kmerr.cocci | 72 +++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 scripts/coccinelle/null/kmerr.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/null/kmerr.cocci b/scripts/coccinelle/null/kmerr.cocci new file mode 100644 index 00000000000..949bf656c64 --- /dev/null +++ b/scripts/coccinelle/null/kmerr.cocci @@ -0,0 +1,72 @@ +/// This semantic patch looks for kmalloc etc that are not followed by a +/// NULL check. It only gives a report in the case where there is some +/// error handling code later in the function, which may be helpful +/// in determining what the error handling code for the call to kmalloc etc +/// should be. +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual context +virtual org +virtual report + +@withtest@ +expression x; +position p; +identifier f,fld; +@@ + +x@p = f(...); +... when != x->fld +\(x == NULL \| x != NULL\) + +@fixed depends on context && !org && !report@ +expression x,x1; +position p1 != withtest.p; +statement S; +position any withtest.p; +identifier f; +@@ + +*x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); +... +*x1@p = f(...); +if (!x1) S + +// ------------------------------------------------------------------------ + +@rfixed depends on (org || report) && !context exists@ +expression x,x1; +position p1 != withtest.p; +position p2; +statement S; +position any withtest.p; +identifier f; +@@ + +x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); +... +x1@p = f@p2(...); +if (!x1) S + +@script:python depends on org@ +p1 << rfixed.p1; +p2 << rfixed.p2; +@@ + +cocci.print_main("alloc call",p1) +cocci.print_secs("possible model",p2) + +@script:python depends on report@ +p1 << rfixed.p1; +p2 << rfixed.p2; +@@ + +msg = "alloc with no test, possible model on line %s" % (p2[0].line) +coccilib.report.print_report(p1[0],msg) -- cgit v1.2.3-70-g09d2 From 7703692ef8d6356c32fbe9665d8cbe5b040eec09 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:38:57 +0200 Subject: Coccinelle: Move deref_null.cocci to a more appropriate directory deref_null.cocci is moved to the 'null' directory which contains other null related rules. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/deref_null.cocci | 293 ------------------------------- scripts/coccinelle/null/deref_null.cocci | 293 +++++++++++++++++++++++++++++++ 2 files changed, 293 insertions(+), 293 deletions(-) delete mode 100644 scripts/coccinelle/deref_null.cocci create mode 100644 scripts/coccinelle/null/deref_null.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/deref_null.cocci b/scripts/coccinelle/deref_null.cocci deleted file mode 100644 index 9969d76d0f4..00000000000 --- a/scripts/coccinelle/deref_null.cocci +++ /dev/null @@ -1,293 +0,0 @@ -/// -/// A variable is dereference under a NULL test. -/// Even though it is know to be NULL. -/// -// Confidence: Moderate -// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. -// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. -// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. -// URL: http://coccinelle.lip6.fr/ -// Comments: -I ... -all_includes can give more complete results -// Options: - -virtual context -virtual patch -virtual org -virtual report - -@initialize:python depends on !context && patch && !org && !report@ - -import sys -print >> sys.stderr, "This semantic patch does not support the 'patch' mode." - -@depends on patch@ -@@ - -this_rule_should_never_matches(); - -@ifm depends on !patch@ -expression *E; -statement S1,S2; -position p1; -@@ - -if@p1 ((E == NULL && ...) || ...) S1 else S2 - -// The following two rules are separate, because both can match a single -// expression in different ways -@pr1 depends on !patch expression@ -expression *ifm.E; -identifier f; -position p1; -@@ - - (E != NULL && ...) ? <+...E->f@p1...+> : ... - -@pr2 depends on !patch expression@ -expression *ifm.E; -identifier f; -position p2; -@@ - -( - (E != NULL) && ... && <+...E->f@p2...+> -| - (E == NULL) || ... || <+...E->f@p2...+> -| - sizeof(<+...E->f@p2...+>) -) - -// For org and report modes - -@r depends on !context && !patch && (org || report) exists@ -expression subE <= ifm.E; -expression *ifm.E; -expression E1,E2; -identifier f; -statement S1,S2,S3,S4; -iterator iter; -position p!={pr1.p1,pr2.p2}; -position ifm.p1; -@@ - -if@p1 ((E == NULL && ...) || ...) -{ - ... when != if (...) S1 else S2 -( - iter(subE,...) S4 // no use -| - list_remove_head(E2,subE,...) -| - subE = E1 -| - for(subE = E1;...;...) S4 -| - subE++ -| - ++subE -| - --subE -| - subE-- -| - &subE -| - E->f@p // bad use -) - ... when any - return ...; -} -else S3 - -@script:python depends on !context && !patch && !org && report@ -p << r.p; -p1 << ifm.p1; -x << ifm.E; -@@ - -msg="ERROR: %s is NULL but dereferenced." % (x) -coccilib.report.print_report(p[0], msg) -cocci.include_match(False) - -@script:python depends on !context && !patch && org && !report@ -p << r.p; -p1 << ifm.p1; -x << ifm.E; -@@ - -msg="ERROR: %s is NULL but dereferenced." % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -cocci.print_main(msg_safe,p) -cocci.include_match(False) - -@s depends on !context && !patch && (org || report) exists@ -expression subE <= ifm.E; -expression *ifm.E; -expression E1,E2; -identifier f; -statement S1,S2,S3,S4; -iterator iter; -position p!={pr1.p1,pr2.p2}; -position ifm.p1; -@@ - -if@p1 ((E == NULL && ...) || ...) -{ - ... when != if (...) S1 else S2 -( - iter(subE,...) S4 // no use -| - list_remove_head(E2,subE,...) -| - subE = E1 -| - for(subE = E1;...;...) S4 -| - subE++ -| - ++subE -| - --subE -| - subE-- -| - &subE -| - E->f@p // bad use -) - ... when any -} -else S3 - -@script:python depends on !context && !patch && !org && report@ -p << s.p; -p1 << ifm.p1; -x << ifm.E; -@@ - -msg="ERROR: %s is NULL but dereferenced." % (x) -coccilib.report.print_report(p[0], msg) - -@script:python depends on !context && !patch && org && !report@ -p << s.p; -p1 << ifm.p1; -x << ifm.E; -@@ - -msg="ERROR: %s is NULL but dereferenced." % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -cocci.print_main(msg_safe,p) - -// For context mode - -@depends on context && !patch && !org && !report exists@ -expression subE <= ifm.E; -expression *ifm.E; -expression E1,E2; -identifier f; -statement S1,S2,S3,S4; -iterator iter; -position p!={pr1.p1,pr2.p2}; -position ifm.p1; -@@ - -if@p1 ((E == NULL && ...) || ...) -{ - ... when != if (...) S1 else S2 -( - iter(subE,...) S4 // no use -| - list_remove_head(E2,subE,...) -| - subE = E1 -| - for(subE = E1;...;...) S4 -| - subE++ -| - ++subE -| - --subE -| - subE-- -| - &subE -| -* E->f@p // bad use -) - ... when any - return ...; -} -else S3 - -// The following three rules are duplicates of ifm, pr1 and pr2 respectively. -// It is need because the previous rule as already made a "change". - -@ifm1 depends on !patch@ -expression *E; -statement S1,S2; -position p1; -@@ - -if@p1 ((E == NULL && ...) || ...) S1 else S2 - -@pr11 depends on !patch expression@ -expression *ifm1.E; -identifier f; -position p1; -@@ - - (E != NULL && ...) ? <+...E->f@p1...+> : ... - -@pr12 depends on !patch expression@ -expression *ifm1.E; -identifier f; -position p2; -@@ - -( - (E != NULL) && ... && <+...E->f@p2...+> -| - (E == NULL) || ... || <+...E->f@p2...+> -| - sizeof(<+...E->f@p2...+>) -) - -@depends on context && !patch && !org && !report exists@ -expression subE <= ifm1.E; -expression *ifm1.E; -expression E1,E2; -identifier f; -statement S1,S2,S3,S4; -iterator iter; -position p!={pr11.p1,pr12.p2}; -position ifm1.p1; -@@ - -if@p1 ((E == NULL && ...) || ...) -{ - ... when != if (...) S1 else S2 -( - iter(subE,...) S4 // no use -| - list_remove_head(E2,subE,...) -| - subE = E1 -| - for(subE = E1;...;...) S4 -| - subE++ -| - ++subE -| - --subE -| - subE-- -| - &subE -| -* E->f@p // bad use -) - ... when any -} -else S3 diff --git a/scripts/coccinelle/null/deref_null.cocci b/scripts/coccinelle/null/deref_null.cocci new file mode 100644 index 00000000000..9969d76d0f4 --- /dev/null +++ b/scripts/coccinelle/null/deref_null.cocci @@ -0,0 +1,293 @@ +/// +/// A variable is dereference under a NULL test. +/// Even though it is know to be NULL. +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: -I ... -all_includes can give more complete results +// Options: + +virtual context +virtual patch +virtual org +virtual report + +@initialize:python depends on !context && patch && !org && !report@ + +import sys +print >> sys.stderr, "This semantic patch does not support the 'patch' mode." + +@depends on patch@ +@@ + +this_rule_should_never_matches(); + +@ifm depends on !patch@ +expression *E; +statement S1,S2; +position p1; +@@ + +if@p1 ((E == NULL && ...) || ...) S1 else S2 + +// The following two rules are separate, because both can match a single +// expression in different ways +@pr1 depends on !patch expression@ +expression *ifm.E; +identifier f; +position p1; +@@ + + (E != NULL && ...) ? <+...E->f@p1...+> : ... + +@pr2 depends on !patch expression@ +expression *ifm.E; +identifier f; +position p2; +@@ + +( + (E != NULL) && ... && <+...E->f@p2...+> +| + (E == NULL) || ... || <+...E->f@p2...+> +| + sizeof(<+...E->f@p2...+>) +) + +// For org and report modes + +@r depends on !context && !patch && (org || report) exists@ +expression subE <= ifm.E; +expression *ifm.E; +expression E1,E2; +identifier f; +statement S1,S2,S3,S4; +iterator iter; +position p!={pr1.p1,pr2.p2}; +position ifm.p1; +@@ + +if@p1 ((E == NULL && ...) || ...) +{ + ... when != if (...) S1 else S2 +( + iter(subE,...) S4 // no use +| + list_remove_head(E2,subE,...) +| + subE = E1 +| + for(subE = E1;...;...) S4 +| + subE++ +| + ++subE +| + --subE +| + subE-- +| + &subE +| + E->f@p // bad use +) + ... when any + return ...; +} +else S3 + +@script:python depends on !context && !patch && !org && report@ +p << r.p; +p1 << ifm.p1; +x << ifm.E; +@@ + +msg="ERROR: %s is NULL but dereferenced." % (x) +coccilib.report.print_report(p[0], msg) +cocci.include_match(False) + +@script:python depends on !context && !patch && org && !report@ +p << r.p; +p1 << ifm.p1; +x << ifm.E; +@@ + +msg="ERROR: %s is NULL but dereferenced." % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +cocci.print_main(msg_safe,p) +cocci.include_match(False) + +@s depends on !context && !patch && (org || report) exists@ +expression subE <= ifm.E; +expression *ifm.E; +expression E1,E2; +identifier f; +statement S1,S2,S3,S4; +iterator iter; +position p!={pr1.p1,pr2.p2}; +position ifm.p1; +@@ + +if@p1 ((E == NULL && ...) || ...) +{ + ... when != if (...) S1 else S2 +( + iter(subE,...) S4 // no use +| + list_remove_head(E2,subE,...) +| + subE = E1 +| + for(subE = E1;...;...) S4 +| + subE++ +| + ++subE +| + --subE +| + subE-- +| + &subE +| + E->f@p // bad use +) + ... when any +} +else S3 + +@script:python depends on !context && !patch && !org && report@ +p << s.p; +p1 << ifm.p1; +x << ifm.E; +@@ + +msg="ERROR: %s is NULL but dereferenced." % (x) +coccilib.report.print_report(p[0], msg) + +@script:python depends on !context && !patch && org && !report@ +p << s.p; +p1 << ifm.p1; +x << ifm.E; +@@ + +msg="ERROR: %s is NULL but dereferenced." % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +cocci.print_main(msg_safe,p) + +// For context mode + +@depends on context && !patch && !org && !report exists@ +expression subE <= ifm.E; +expression *ifm.E; +expression E1,E2; +identifier f; +statement S1,S2,S3,S4; +iterator iter; +position p!={pr1.p1,pr2.p2}; +position ifm.p1; +@@ + +if@p1 ((E == NULL && ...) || ...) +{ + ... when != if (...) S1 else S2 +( + iter(subE,...) S4 // no use +| + list_remove_head(E2,subE,...) +| + subE = E1 +| + for(subE = E1;...;...) S4 +| + subE++ +| + ++subE +| + --subE +| + subE-- +| + &subE +| +* E->f@p // bad use +) + ... when any + return ...; +} +else S3 + +// The following three rules are duplicates of ifm, pr1 and pr2 respectively. +// It is need because the previous rule as already made a "change". + +@ifm1 depends on !patch@ +expression *E; +statement S1,S2; +position p1; +@@ + +if@p1 ((E == NULL && ...) || ...) S1 else S2 + +@pr11 depends on !patch expression@ +expression *ifm1.E; +identifier f; +position p1; +@@ + + (E != NULL && ...) ? <+...E->f@p1...+> : ... + +@pr12 depends on !patch expression@ +expression *ifm1.E; +identifier f; +position p2; +@@ + +( + (E != NULL) && ... && <+...E->f@p2...+> +| + (E == NULL) || ... || <+...E->f@p2...+> +| + sizeof(<+...E->f@p2...+>) +) + +@depends on context && !patch && !org && !report exists@ +expression subE <= ifm1.E; +expression *ifm1.E; +expression E1,E2; +identifier f; +statement S1,S2,S3,S4; +iterator iter; +position p!={pr11.p1,pr12.p2}; +position ifm1.p1; +@@ + +if@p1 ((E == NULL && ...) || ...) +{ + ... when != if (...) S1 else S2 +( + iter(subE,...) S4 // no use +| + list_remove_head(E2,subE,...) +| + subE = E1 +| + for(subE = E1;...;...) S4 +| + subE++ +| + ++subE +| + --subE +| + subE-- +| + &subE +| +* E->f@p // bad use +) + ... when any +} +else S3 -- cgit v1.2.3-70-g09d2 From e105007c1271243568d58c8a4285b19c8eea48d1 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:38:58 +0200 Subject: Coccinelle: Add locks/call_kern.cocci Find functions that refer to GFP_KERNEL but are called with locks held. The proposed change of converting the GFP_KERNEL is not necessarily the correct one. It may be desired to unlock the lock, or to not call the function under the lock in the first place. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/locks/call_kern.cocci | 74 ++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 scripts/coccinelle/locks/call_kern.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/locks/call_kern.cocci b/scripts/coccinelle/locks/call_kern.cocci new file mode 100644 index 00000000000..00af5344a68 --- /dev/null +++ b/scripts/coccinelle/locks/call_kern.cocci @@ -0,0 +1,74 @@ +/// Find functions that refer to GFP_KERNEL but are called with locks held. +/// The proposed change of converting the GFP_KERNEL is not necessarily the +/// correct one. It may be desired to unlock the lock, or to not call the +/// function under the lock in the first place. +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@gfp exists@ +identifier fn; +position p; +@@ + +fn(...) { + ... when != read_unlock_irq(...) + when != write_unlock_irq(...) + when != read_unlock_irqrestore(...) + when != write_unlock_irqrestore(...) + when != spin_unlock(...) + when != spin_unlock_irq(...) + when != spin_unlock_irqrestore(...) + when != local_irq_enable(...) + when any + GFP_KERNEL@p + ... when any +} + +@locked@ +identifier gfp.fn; +@@ + +( +read_lock_irq +| +write_lock_irq +| +read_lock_irqsave +| +write_lock_irqsave +| +spin_lock +| +spin_trylock +| +spin_lock_irq +| +spin_lock_irqsave +| +local_irq_disable +) + (...) +... when != read_unlock_irq(...) + when != write_unlock_irq(...) + when != read_unlock_irqrestore(...) + when != write_unlock_irqrestore(...) + when != spin_unlock(...) + when != spin_unlock_irq(...) + when != spin_unlock_irqrestore(...) + when != local_irq_enable(...) +fn(...) + +@depends on locked@ +position gfp.p; +@@ + +- GFP_KERNEL@p ++ GFP_ATOMIC -- cgit v1.2.3-70-g09d2 From 8aa6273106756c30e5349b58eed28d93d8d88164 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:38:59 +0200 Subject: Coccinelle: Add locks/double_lock.cocci Find double locks. False positives may occur when some paths cannot occur at execution, due to the values of variables, and when there is an intervening function call that releases the lock. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/locks/double_lock.cocci | 92 ++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 scripts/coccinelle/locks/double_lock.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/locks/double_lock.cocci b/scripts/coccinelle/locks/double_lock.cocci new file mode 100644 index 00000000000..63b24e682fa --- /dev/null +++ b/scripts/coccinelle/locks/double_lock.cocci @@ -0,0 +1,92 @@ +/// Find double locks. False positives may occur when some paths cannot +/// occur at execution, due to the values of variables, and when there is +/// an intervening function call that releases the lock. +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual org +virtual report + +@locked@ +position p1; +expression E1; +position p; +@@ + +( +mutex_lock@p1 +| +mutex_trylock@p1 +| +spin_lock@p1 +| +spin_trylock@p1 +| +read_lock@p1 +| +read_trylock@p1 +| +write_lock@p1 +| +write_trylock@p1 +) (E1@p,...); + +@balanced@ +position p1 != locked.p1; +position locked.p; +identifier lock,unlock; +expression x <= locked.E1; +expression E,locked.E1; +expression E2; +@@ + +if (E) { + <+... when != E1 + lock(E1@p,...) + ...+> +} +... when != E1 + when != \(x = E2\|&x\) + when forall +if (E) { + <+... when != E1 + unlock@p1(E1,...) + ...+> +} + +@r depends on !balanced exists@ +expression x <= locked.E1; +expression locked.E1; +expression E2; +identifier lock; +position locked.p,p1,p2; +@@ + +lock@p1 (E1@p,...); +... when != E1 + when != \(x = E2\|&x\) +lock@p2 (E1,...); + +@script:python depends on org@ +p1 << r.p1; +p2 << r.p2; +lock << r.lock; +@@ + +cocci.print_main(lock,p1) +cocci.print_secs("second lock",p2) + +@script:python depends on report@ +p1 << r.p1; +p2 << r.p2; +lock << r.lock; +@@ + +msg = "second lock on line %s" % (p2[0].line) +coccilib.report.print_report(p1[0],msg) -- cgit v1.2.3-70-g09d2 From 54c056280e0dfcd39b33c4ed75116ce98697511c Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:00 +0200 Subject: Coccinelle: Add locks/mini_lock.cocci Find missing unlocks. This semantic match considers the specific case where the unlock is missing from an if branch, and there is a lock before the if and an unlock after the if. False positives are due to cases where the if branch represents a case where the function is supposed to exit with the lock held, or where there is some preceding function call that releases the lock. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/locks/mini_lock.cocci | 95 ++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 scripts/coccinelle/locks/mini_lock.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/locks/mini_lock.cocci b/scripts/coccinelle/locks/mini_lock.cocci new file mode 100644 index 00000000000..7641a292543 --- /dev/null +++ b/scripts/coccinelle/locks/mini_lock.cocci @@ -0,0 +1,95 @@ +/// Find missing unlocks. This semantic match considers the specific case +/// where the unlock is missing from an if branch, and there is a lock +/// before the if and an unlock after the if. False positives are due to +/// cases where the if branch represents a case where the function is +/// supposed to exit with the lock held, or where there is some preceding +/// function call that releases the lock. +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual org +virtual report + +@prelocked@ +position p1,p; +expression E1; +@@ + +( +mutex_lock@p1 +| +mutex_trylock@p1 +| +spin_lock@p1 +| +spin_trylock@p1 +| +read_lock@p1 +| +read_trylock@p1 +| +write_lock@p1 +| +write_trylock@p1 +| +read_lock_irq@p1 +| +write_lock_irq@p1 +| +read_lock_irqsave@p1 +| +write_lock_irqsave@p1 +| +spin_lock_irq@p1 +| +spin_lock_irqsave@p1 +) (E1@p,...); + +@looped@ +position r; +@@ + +for(...;...;...) { <+... return@r ...; ...+> } + +@err@ +expression E1; +position prelocked.p; +position up != prelocked.p1; +position r!=looped.r; +identifier lock,unlock; +@@ + +lock(E1@p,...); +<+... when != E1 +if (...) { + ... when != E1 + return@r ...; +} +...+> +unlock@up(E1,...); + +@script:python depends on org@ +p << prelocked.p1; +lock << err.lock; +unlock << err.unlock; +p2 << err.r; +@@ + +cocci.print_main(lock,p) +cocci.print_secs(unlock,p2) + +@script:python depends on report@ +p << prelocked.p1; +lock << err.lock; +unlock << err.unlock; +p2 << err.r; +@@ + +msg = "preceding lock on line %s" % (p[0].line) +coccilib.report.print_report(p2[0],msg) -- cgit v1.2.3-70-g09d2 From 4045159253a49a56d117148d67bc86a72762a0d3 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:01 +0200 Subject: Coccinelle: Add iterators/fen.cocci for_each_node iterators only exit normally when the loop cursor is NULL, so there is no point to call of_node_put on the final value. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/iterators/fen.cocci | 64 ++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 scripts/coccinelle/iterators/fen.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/iterators/fen.cocci b/scripts/coccinelle/iterators/fen.cocci new file mode 100644 index 00000000000..77bc108c3f5 --- /dev/null +++ b/scripts/coccinelle/iterators/fen.cocci @@ -0,0 +1,64 @@ +/// These iterators only exit normally when the loop cursor is NULL, so there +/// is no point to call of_node_put on the final value. +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@@ +iterator name for_each_node_by_name; +expression np,E; +identifier l; +@@ + +for_each_node_by_name(np,...) { + ... when != break; + when != goto l; +} +... when != np = E +- of_node_put(np); + +@@ +iterator name for_each_node_by_type; +expression np,E; +identifier l; +@@ + +for_each_node_by_type(np,...) { + ... when != break; + when != goto l; +} +... when != np = E +- of_node_put(np); + +@@ +iterator name for_each_compatible_node; +expression np,E; +identifier l; +@@ + +for_each_compatible_node(np,...) { + ... when != break; + when != goto l; +} +... when != np = E +- of_node_put(np); + +@@ +iterator name for_each_matching_node; +expression np,E; +identifier l; +@@ + +for_each_matching_node(np,...) { + ... when != break; + when != goto l; +} +... when != np = E +- of_node_put(np); -- cgit v1.2.3-70-g09d2 From afc48a82fafe55dbeeaf7c0d83d29cf279cb1c70 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:02 +0200 Subject: Coccinelle: Add iterators/itnull.cocci Many iterators have the property that the first argument is always bound to a real list element, never NULL. False positives arise for some iterators that do not have this property, or in cases when the loop cursor is reassigned. The latter should only happen when the matched code is on the way to a loop exit (break, goto, or return). Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/iterators/itnull.cocci | 58 +++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 scripts/coccinelle/iterators/itnull.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/iterators/itnull.cocci b/scripts/coccinelle/iterators/itnull.cocci new file mode 100644 index 00000000000..baa4297a4ed --- /dev/null +++ b/scripts/coccinelle/iterators/itnull.cocci @@ -0,0 +1,58 @@ +/// Many iterators have the property that the first argument is always bound +/// to a real list element, never NULL. False positives arise for some +/// iterators that do not have this property, or in cases when the loop +/// cursor is reassigned. The latter should only happen when the matched +/// code is on the way to a loop exit (break, goto, or return). +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@@ +iterator I; +expression x,E,E1,E2; +statement S,S1,S2; +@@ + +I(x,...) { <... +( +- if (x == NULL && ...) S +| +- if (x != NULL || ...) + S +| +- (x == NULL) || + E +| +- (x != NULL) && + E +| +- (x == NULL && ...) ? E1 : + E2 +| +- (x != NULL || ...) ? + E1 +- : E2 +| +- if (x == NULL && ...) S1 else + S2 +| +- if (x != NULL || ...) + S1 +- else S2 +| ++ BAD( + x == NULL ++ ) +| ++ BAD( + x != NULL ++ ) +) + ...> } \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 5c34050188f5e3db7f8137d819ecbb7d9327dd93 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:03 +0200 Subject: Coccinelle: Add iterators/list_entry_update.cocci list_for_each_entry uses its first argument to get from one element of the list to the next, so it is usually not a good idea to reassign it. The first rule finds such a reassignment and the second rule checks that there is a path from the reassignment back to the top of the loop. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- .../coccinelle/iterators/list_entry_update.cocci | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 scripts/coccinelle/iterators/list_entry_update.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/iterators/list_entry_update.cocci b/scripts/coccinelle/iterators/list_entry_update.cocci new file mode 100644 index 00000000000..b2967475679 --- /dev/null +++ b/scripts/coccinelle/iterators/list_entry_update.cocci @@ -0,0 +1,62 @@ +/// list_for_each_entry uses its first argument to get from one element of +/// the list to the next, so it is usually not a good idea to reassign it. +/// The first rule finds such a reassignment and the second rule checks +/// that there is a path from the reassignment back to the top of the loop. +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual context +virtual org +virtual report + +@r@ +iterator name list_for_each_entry; +expression x,E; +position p1,p2; +@@ + +list_for_each_entry@p1(x,...) { <... x =@p2 E ...> } + +@depends on context && !org && !report@ +expression x,E; +position r.p1,r.p2; +statement S; +@@ + +*x =@p2 E +... +list_for_each_entry@p1(x,...) S + +// ------------------------------------------------------------------------ + +@back depends on (org || report) && !context exists@ +expression x,E; +position r.p1,r.p2; +statement S; +@@ + +x =@p2 E +... +list_for_each_entry@p1(x,...) S + +@script:python depends on back && org@ +p1 << r.p1; +p2 << r.p2; +@@ + +cocci.print_main("iterator",p1) +cocci.print_secs("update",p2) + +@script:python depends on back && report@ +p1 << r.p1; +p2 << r.p2; +@@ + +msg = "iterator with update on line %s" % (p2[0].line) +coccilib.report.print_report(p1[0],msg) -- cgit v1.2.3-70-g09d2 From 43ba21b57a3e757000bfa8ccf46c81f232b4d881 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:04 +0200 Subject: Coccinelle: Add free/kfree.cocci Find a use after free. Values of variables may imply that some execution paths are not possible, resulting in false positives. Another source of false positives are macros such as SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/free/kfree.cocci | 116 ++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 scripts/coccinelle/free/kfree.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/free/kfree.cocci b/scripts/coccinelle/free/kfree.cocci new file mode 100644 index 00000000000..c13a5395707 --- /dev/null +++ b/scripts/coccinelle/free/kfree.cocci @@ -0,0 +1,116 @@ +/// Find a use after free. Values of variables may imply that some +/// execution paths are not possible, resulting in false positives. +/// Another source of false positives are macros such as +/// SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual org +virtual report + +@free@ +expression E; +position p1; +@@ + +kfree@p1(E) + +@print expression@ +constant char *c; +expression free.E,E2; +type T; +position p; +identifier f; +@@ + +( + f(...,c,...,(T)E@p,...) +| + E@p == E2 +| + E@p != E2 +| + !E@p +| + E@p || ... +) + +@sz@ +expression free.E; +position p; +@@ + + sizeof(<+...E@p...+>) + +@loop exists@ +expression E; +identifier l; +position ok; +@@ + +while (1) { ... + kfree@ok(E) + ... when != break; + when != goto l; + when forall +} + +@r exists@ +expression free.E, subE<=free.E, E2; +expression E1; +iterator iter; +statement S; +position free.p1!=loop.ok,p2!={print.p,sz.p}; +@@ + +kfree@p1(E,...) +... +( + iter(...,subE,...) S // no use +| + list_remove_head(E1,subE,...) +| + subE = E2 +| + subE++ +| + ++subE +| + --subE +| + subE-- +| + &subE +| + BUG(...) +| + BUG_ON(...) +| + return_VALUE(...) +| + return_ACPI_STATUS(...) +| + E@p2 // bad use +) + +@script:python depends on org@ +p1 << free.p1; +p2 << r.p2; +@@ + +cocci.print_main("kfree",p1) +cocci.print_secs("ref",p2) + +@script:python depends on report@ +p1 << free.p1; +p2 << r.p2; +@@ + +msg = "reference preceded by free on line %s" % (p1[0].line) +coccilib.report.print_report(p2[0],msg) -- cgit v1.2.3-70-g09d2 From 998f5523230a8a837809f942d556360f69121677 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:05 +0200 Subject: Coccinelle: Add api/kstrdup.cocci Use kstrdup rather than duplicating its implementation Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/api/kstrdup.cocci | 39 ++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 scripts/coccinelle/api/kstrdup.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/api/kstrdup.cocci b/scripts/coccinelle/api/kstrdup.cocci new file mode 100644 index 00000000000..e0805ad08d3 --- /dev/null +++ b/scripts/coccinelle/api/kstrdup.cocci @@ -0,0 +1,39 @@ +/// Use kstrdup rather than duplicating its implementation +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@@ +expression from,to; +expression flag,E1,E2; +statement S; +@@ + +- to = kmalloc(strlen(from) + 1,flag); ++ to = kstrdup(from, flag); + ... when != \(from = E1 \| to = E1 \) + if (to==NULL || ...) S + ... when != \(from = E2 \| to = E2 \) +- strcpy(to, from); + +@@ +expression x,from,to; +expression flag,E1,E2,E3; +statement S; +@@ + +- x = strlen(from) + 1; + ... when != \( x = E1 \| from = E1 \) +- to = \(kmalloc\|kzalloc\)(x,flag); ++ to = kstrdup(from, flag); + ... when != \(x = E2 \| from = E2 \| to = E2 \) + if (to==NULL || ...) S + ... when != \(x = E3 \| from = E3 \| to = E3 \) +- memcpy(to, from, x); -- cgit v1.2.3-70-g09d2 From 0426a97c4b672166cbcfdc7b18466d4f207f7a36 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:06 +0200 Subject: Coccinelle: Add api/memdup.cocci Use kmemdup rather than duplicating its implementation Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/api/memdup.cocci | 40 +++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 scripts/coccinelle/api/memdup.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/api/memdup.cocci b/scripts/coccinelle/api/memdup.cocci new file mode 100644 index 00000000000..b5d722077dc --- /dev/null +++ b/scripts/coccinelle/api/memdup.cocci @@ -0,0 +1,40 @@ +/// Use kmemdup rather than duplicating its implementation +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@r1@ +expression from,to; +expression flag; +position p; +@@ + + to = \(kmalloc@p\|kzalloc@p\)(strlen(from) + 1,flag); + +@r2@ +expression x,from,to; +expression flag,E1; +position p; +@@ + + x = strlen(from) + 1; + ... when != \( x = E1 \| from = E1 \) + to = \(kmalloc@p\|kzalloc@p\)(x,flag); + +@@ +expression from,to,size,flag; +position p != {r1.p,r2.p}; +statement S; +@@ + +- to = \(kmalloc@p\|kzalloc@p\)(size,flag); ++ to = kmemdup(from,size,flag); + if (to==NULL || ...) S +- memcpy(to, from, size); -- cgit v1.2.3-70-g09d2 From 034174598bc8ffd9586432852502e368a43ef0f1 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:07 +0200 Subject: Coccinelle: Add api/memdup_user Use kmemdup_user rather than duplicating its implementation This is a little bit restricted to reduce false positives Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/api/memdup_user.cocci | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 scripts/coccinelle/api/memdup_user.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/api/memdup_user.cocci b/scripts/coccinelle/api/memdup_user.cocci new file mode 100644 index 00000000000..72ce012e878 --- /dev/null +++ b/scripts/coccinelle/api/memdup_user.cocci @@ -0,0 +1,35 @@ +/// Use kmemdup_user rather than duplicating its implementation +/// This is a little bit restricted to reduce false positives +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual patch + +@@ +expression from,to,size,flag; +position p; +identifier l1,l2; +@@ + +- to = \(kmalloc@p\|kzalloc@p\)(size,flag); ++ to = memdup_user(from,size); + if ( +- to==NULL ++ IS_ERR(to) + || ...) { + <+... when != goto l1; +- -ENOMEM ++ PTR_ERR(to) + ...+> + } +- if (copy_from_user(to, from, size) != 0) { +- <+... when != goto l2; +- -EFAULT +- ...+> +- } -- cgit v1.2.3-70-g09d2 From 99d653d4bc269aebf255f3864334110dbcc70f37 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:08 +0200 Subject: Coccinelle: Move err_cast.cocci to the api directory Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/api/err_cast.cocci | 56 +++++++++++++++++++++++++++++++++++ scripts/coccinelle/err_cast.cocci | 56 ----------------------------------- 2 files changed, 56 insertions(+), 56 deletions(-) create mode 100644 scripts/coccinelle/api/err_cast.cocci delete mode 100644 scripts/coccinelle/err_cast.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/api/err_cast.cocci b/scripts/coccinelle/api/err_cast.cocci new file mode 100644 index 00000000000..2ce115000af --- /dev/null +++ b/scripts/coccinelle/api/err_cast.cocci @@ -0,0 +1,56 @@ +/// +/// Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) +/// +// Confidence: High +// Copyright: (C) 2009, 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2009, 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Options: +// +// Keywords: ERR_PTR, PTR_ERR, ERR_CAST +// Version min: 2.6.25 +// + +virtual context +virtual patch +virtual org +virtual report + + +@ depends on context && !patch && !org && !report@ +expression x; +@@ + +* ERR_PTR(PTR_ERR(x)) + +@ depends on !context && patch && !org && !report @ +expression x; +@@ + +- ERR_PTR(PTR_ERR(x)) ++ ERR_CAST(x) + +@r depends on !context && !patch && (org || report)@ +expression x; +position p; +@@ + + ERR_PTR@p(PTR_ERR(x)) + +@script:python depends on org@ +p << r.p; +x << r.x; +@@ + +msg="WARNING ERR_CAST can be used with %s" % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +coccilib.org.print_todo(p[0], msg_safe) + +@script:python depends on report@ +p << r.p; +x << r.x; +@@ + +msg="WARNING: ERR_CAST can be used with %s" % (x) +coccilib.report.print_report(p[0], msg) diff --git a/scripts/coccinelle/err_cast.cocci b/scripts/coccinelle/err_cast.cocci deleted file mode 100644 index 2ce115000af..00000000000 --- a/scripts/coccinelle/err_cast.cocci +++ /dev/null @@ -1,56 +0,0 @@ -/// -/// Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) -/// -// Confidence: High -// Copyright: (C) 2009, 2010 Nicolas Palix, DIKU. GPLv2. -// Copyright: (C) 2009, 2010 Julia Lawall, DIKU. GPLv2. -// Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6. GPLv2. -// URL: http://coccinelle.lip6.fr/ -// Options: -// -// Keywords: ERR_PTR, PTR_ERR, ERR_CAST -// Version min: 2.6.25 -// - -virtual context -virtual patch -virtual org -virtual report - - -@ depends on context && !patch && !org && !report@ -expression x; -@@ - -* ERR_PTR(PTR_ERR(x)) - -@ depends on !context && patch && !org && !report @ -expression x; -@@ - -- ERR_PTR(PTR_ERR(x)) -+ ERR_CAST(x) - -@r depends on !context && !patch && (org || report)@ -expression x; -position p; -@@ - - ERR_PTR@p(PTR_ERR(x)) - -@script:python depends on org@ -p << r.p; -x << r.x; -@@ - -msg="WARNING ERR_CAST can be used with %s" % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -coccilib.org.print_todo(p[0], msg_safe) - -@script:python depends on report@ -p << r.p; -x << r.x; -@@ - -msg="WARNING: ERR_CAST can be used with %s" % (x) -coccilib.report.print_report(p[0], msg) -- cgit v1.2.3-70-g09d2 From 77c272fb24507c43fa301e3da83eb7d67d36a544 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:09 +0200 Subject: Coccinelle: Move resource_size.cocci to the api directory Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/api/resource_size.cocci | 93 ++++++++++++++++++++++++++++++ scripts/coccinelle/resource_size.cocci | 93 ------------------------------ 2 files changed, 93 insertions(+), 93 deletions(-) create mode 100644 scripts/coccinelle/api/resource_size.cocci delete mode 100644 scripts/coccinelle/resource_size.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/api/resource_size.cocci b/scripts/coccinelle/api/resource_size.cocci new file mode 100644 index 00000000000..1935a58b39d --- /dev/null +++ b/scripts/coccinelle/api/resource_size.cocci @@ -0,0 +1,93 @@ +/// +/// Use resource_size function on resource object +/// instead of explicit computation. +/// +// Confidence: High +// Copyright: (C) 2009, 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2009, 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Options: +// +// Keywords: resource_size +// Version min: 2.6.27 resource_size +// + +virtual context +virtual patch +virtual org +virtual report + +//---------------------------------------------------------- +// For context mode +//---------------------------------------------------------- + +@r_context depends on context && !patch && !org@ +struct resource *res; +@@ + +* (res->end - res->start) + 1 + +//---------------------------------------------------------- +// For patch mode +//---------------------------------------------------------- + +@r_patch depends on !context && patch && !org@ +struct resource *res; +@@ + +- (res->end - res->start) + 1 ++ resource_size(res) + +//---------------------------------------------------------- +// For org mode +//---------------------------------------------------------- + + +@r_org depends on !context && !patch && (org || report)@ +struct resource *res; +position p; +@@ + + (res->end@p - res->start) + 1 + +@rbad_org depends on !context && !patch && (org || report)@ +struct resource *res; +position p != r_org.p; +@@ + + res->end@p - res->start + +@script:python depends on org@ +p << r_org.p; +x << r_org.res; +@@ + +msg="ERROR with %s" % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +coccilib.org.print_todo(p[0], msg_safe) + +@script:python depends on report@ +p << r_org.p; +x << r_org.res; +@@ + +msg="ERROR: Missing resource_size with %s" % (x) +coccilib.report.print_report(p[0], msg) + +@script:python depends on org@ +p << rbad_org.p; +x << rbad_org.res; +@@ + +msg="WARNING with %s" % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +coccilib.org.print_todo(p[0], msg_safe) + +@script:python depends on report@ +p << rbad_org.p; +x << rbad_org.res; +@@ + +msg="WARNING: Suspicious code. resource_size is maybe missing with %s" % (x) +coccilib.report.print_report(p[0], msg) diff --git a/scripts/coccinelle/resource_size.cocci b/scripts/coccinelle/resource_size.cocci deleted file mode 100644 index 1935a58b39d..00000000000 --- a/scripts/coccinelle/resource_size.cocci +++ /dev/null @@ -1,93 +0,0 @@ -/// -/// Use resource_size function on resource object -/// instead of explicit computation. -/// -// Confidence: High -// Copyright: (C) 2009, 2010 Nicolas Palix, DIKU. GPLv2. -// Copyright: (C) 2009, 2010 Julia Lawall, DIKU. GPLv2. -// Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6. GPLv2. -// URL: http://coccinelle.lip6.fr/ -// Options: -// -// Keywords: resource_size -// Version min: 2.6.27 resource_size -// - -virtual context -virtual patch -virtual org -virtual report - -//---------------------------------------------------------- -// For context mode -//---------------------------------------------------------- - -@r_context depends on context && !patch && !org@ -struct resource *res; -@@ - -* (res->end - res->start) + 1 - -//---------------------------------------------------------- -// For patch mode -//---------------------------------------------------------- - -@r_patch depends on !context && patch && !org@ -struct resource *res; -@@ - -- (res->end - res->start) + 1 -+ resource_size(res) - -//---------------------------------------------------------- -// For org mode -//---------------------------------------------------------- - - -@r_org depends on !context && !patch && (org || report)@ -struct resource *res; -position p; -@@ - - (res->end@p - res->start) + 1 - -@rbad_org depends on !context && !patch && (org || report)@ -struct resource *res; -position p != r_org.p; -@@ - - res->end@p - res->start - -@script:python depends on org@ -p << r_org.p; -x << r_org.res; -@@ - -msg="ERROR with %s" % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -coccilib.org.print_todo(p[0], msg_safe) - -@script:python depends on report@ -p << r_org.p; -x << r_org.res; -@@ - -msg="ERROR: Missing resource_size with %s" % (x) -coccilib.report.print_report(p[0], msg) - -@script:python depends on org@ -p << rbad_org.p; -x << rbad_org.res; -@@ - -msg="WARNING with %s" % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -coccilib.org.print_todo(p[0], msg_safe) - -@script:python depends on report@ -p << rbad_org.p; -x << rbad_org.res; -@@ - -msg="WARNING: Suspicious code. resource_size is maybe missing with %s" % (x) -coccilib.report.print_report(p[0], msg) -- cgit v1.2.3-70-g09d2 From be8fe9d451936a7a412b02cb88a13ffe46879bcf Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:10 +0200 Subject: Coccinelle: Move alloc directory into api directory alloc contains various semantic patches related to the allocation APIs Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/alloc/drop_kmalloc_cast.cocci | 67 ----------------- scripts/coccinelle/alloc/kzalloc-simple.cocci | 82 --------------------- .../coccinelle/api/alloc/drop_kmalloc_cast.cocci | 67 +++++++++++++++++ scripts/coccinelle/api/alloc/kzalloc-simple.cocci | 86 ++++++++++++++++++++++ 4 files changed, 153 insertions(+), 149 deletions(-) delete mode 100644 scripts/coccinelle/alloc/drop_kmalloc_cast.cocci delete mode 100644 scripts/coccinelle/alloc/kzalloc-simple.cocci create mode 100644 scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci create mode 100644 scripts/coccinelle/api/alloc/kzalloc-simple.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci b/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci deleted file mode 100644 index 7d4771d449c..00000000000 --- a/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci +++ /dev/null @@ -1,67 +0,0 @@ -/// -/// Casting (void *) value returned by kmalloc is useless -/// as mentioned in Documentation/CodingStyle, Chap 14. -/// -// Confidence: High -// Copyright: 2009,2010 Nicolas Palix, DIKU. GPLv2. -// URL: http://coccinelle.lip6.fr/ -// Options: -no_includes -include_headers -// -// Keywords: kmalloc, kzalloc, kcalloc -// Version min: < 2.6.12 kmalloc -// Version min: < 2.6.12 kcalloc -// Version min: 2.6.14 kzalloc -// - -virtual context -virtual patch -virtual org -virtual report - -//---------------------------------------------------------- -// For context mode -//---------------------------------------------------------- - -@depends on context@ -type T; -@@ - -* (T *) - \(kmalloc\|kzalloc\|kcalloc\)(...) - -//---------------------------------------------------------- -// For patch mode -//---------------------------------------------------------- - -@depends on patch@ -type T; -@@ - -- (T *) - \(kmalloc\|kzalloc\|kcalloc\)(...) - -//---------------------------------------------------------- -// For org and report mode -//---------------------------------------------------------- - -@r depends on org || report@ -type T; -position p; -@@ - - (T@p *)\(kmalloc\|kzalloc\|kcalloc\)(...) - -@script:python depends on org@ -p << r.p; -t << r.T; -@@ - -coccilib.org.print_safe_todo(p[0], t) - -@script:python depends on report@ -p << r.p; -t << r.T; -@@ - -msg="WARNING: casting value returned by k[cmz]alloc to (%s *) is useless." % (t) -coccilib.report.print_report(p[0], msg) diff --git a/scripts/coccinelle/alloc/kzalloc-simple.cocci b/scripts/coccinelle/alloc/kzalloc-simple.cocci deleted file mode 100644 index 2eae828fc65..00000000000 --- a/scripts/coccinelle/alloc/kzalloc-simple.cocci +++ /dev/null @@ -1,82 +0,0 @@ -/// -/// kzalloc should be used rather than kmalloc followed by memset 0 -/// -// Confidence: High -// Copyright: (C) 2009-2010 Julia Lawall, Nicolas Palix, DIKU. GPLv2. -// Copyright: (C) 2009-2010 Gilles Muller, INRIA/LiP6. GPLv2. -// URL: http://coccinelle.lip6.fr/rules/kzalloc.html -// Options: -no_includes -include_headers -// -// Keywords: kmalloc, kzalloc -// Version min: < 2.6.12 kmalloc -// Version min: 2.6.14 kzalloc -// - -virtual context -virtual patch -virtual org -virtual report - -//---------------------------------------------------------- -// For context mode -//---------------------------------------------------------- - -@depends on context@ -type T, T2; -expression x; -expression E1,E2; -statement S; -@@ - -* x = (T)kmalloc(E1,E2); - if ((x==NULL) || ...) S -* memset((T2)x,0,E1); - -//---------------------------------------------------------- -// For patch mode -//---------------------------------------------------------- - -@depends on patch@ -type T, T2; -expression x; -expression E1,E2; -statement S; -@@ - -- x = (T)kmalloc(E1,E2); -+ x = kzalloc(E1,E2); - if ((x==NULL) || ...) S -- memset((T2)x,0,E1); - -//---------------------------------------------------------- -// For org mode -//---------------------------------------------------------- - -@r depends on org || report@ -type T, T2; -expression x; -expression E1,E2; -statement S; -position p; -@@ - - x = (T)kmalloc@p(E1,E2); - if ((x==NULL) || ...) S - memset((T2)x,0,E1); - -@script:python depends on org@ -p << r.p; -x << r.x; -@@ - -msg="%s" % (x) -msg_safe=msg.replace("[","@(").replace("]",")") -coccilib.org.print_todo(p[0], msg_safe) - -@script:python depends on report@ -p << r.p; -x << r.x; -@@ - -msg="WARNING: kzalloc should be used for %s, instead of kmalloc/memset" % (x) -coccilib.report.print_report(p[0], msg) diff --git a/scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci b/scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci new file mode 100644 index 00000000000..7d4771d449c --- /dev/null +++ b/scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci @@ -0,0 +1,67 @@ +/// +/// Casting (void *) value returned by kmalloc is useless +/// as mentioned in Documentation/CodingStyle, Chap 14. +/// +// Confidence: High +// Copyright: 2009,2010 Nicolas Palix, DIKU. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Options: -no_includes -include_headers +// +// Keywords: kmalloc, kzalloc, kcalloc +// Version min: < 2.6.12 kmalloc +// Version min: < 2.6.12 kcalloc +// Version min: 2.6.14 kzalloc +// + +virtual context +virtual patch +virtual org +virtual report + +//---------------------------------------------------------- +// For context mode +//---------------------------------------------------------- + +@depends on context@ +type T; +@@ + +* (T *) + \(kmalloc\|kzalloc\|kcalloc\)(...) + +//---------------------------------------------------------- +// For patch mode +//---------------------------------------------------------- + +@depends on patch@ +type T; +@@ + +- (T *) + \(kmalloc\|kzalloc\|kcalloc\)(...) + +//---------------------------------------------------------- +// For org and report mode +//---------------------------------------------------------- + +@r depends on org || report@ +type T; +position p; +@@ + + (T@p *)\(kmalloc\|kzalloc\|kcalloc\)(...) + +@script:python depends on org@ +p << r.p; +t << r.T; +@@ + +coccilib.org.print_safe_todo(p[0], t) + +@script:python depends on report@ +p << r.p; +t << r.T; +@@ + +msg="WARNING: casting value returned by k[cmz]alloc to (%s *) is useless." % (t) +coccilib.report.print_report(p[0], msg) diff --git a/scripts/coccinelle/api/alloc/kzalloc-simple.cocci b/scripts/coccinelle/api/alloc/kzalloc-simple.cocci new file mode 100644 index 00000000000..046b9b16f8f --- /dev/null +++ b/scripts/coccinelle/api/alloc/kzalloc-simple.cocci @@ -0,0 +1,86 @@ +/// +/// Use kzalloc rather than kmalloc followed by memset with 0 +/// +/// This considers some simple cases that are common and easy to validate +/// Note in particular that there are no ...s in the rule, so all of the +/// matched code has to be contiguous +/// +// Confidence: High +// Copyright: (C) 2009-2010 Julia Lawall, Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2009-2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/rules/kzalloc.html +// Options: -no_includes -include_headers +// +// Keywords: kmalloc, kzalloc +// Version min: < 2.6.12 kmalloc +// Version min: 2.6.14 kzalloc +// + +virtual context +virtual patch +virtual org +virtual report + +//---------------------------------------------------------- +// For context mode +//---------------------------------------------------------- + +@depends on context@ +type T, T2; +expression x; +expression E1,E2; +statement S; +@@ + +* x = (T)kmalloc(E1,E2); + if ((x==NULL) || ...) S +* memset((T2)x,0,E1); + +//---------------------------------------------------------- +// For patch mode +//---------------------------------------------------------- + +@depends on patch@ +type T, T2; +expression x; +expression E1,E2; +statement S; +@@ + +- x = (T)kmalloc(E1,E2); ++ x = kzalloc(E1,E2); + if ((x==NULL) || ...) S +- memset((T2)x,0,E1); + +//---------------------------------------------------------- +// For org mode +//---------------------------------------------------------- + +@r depends on org || report@ +type T, T2; +expression x; +expression E1,E2; +statement S; +position p; +@@ + + x = (T)kmalloc@p(E1,E2); + if ((x==NULL) || ...) S + memset((T2)x,0,E1); + +@script:python depends on org@ +p << r.p; +x << r.x; +@@ + +msg="%s" % (x) +msg_safe=msg.replace("[","@(").replace("]",")") +coccilib.org.print_todo(p[0], msg_safe) + +@script:python depends on report@ +p << r.p; +x << r.x; +@@ + +msg="WARNING: kzalloc should be used for %s, instead of kmalloc/memset" % (x) +coccilib.report.print_report(p[0], msg) -- cgit v1.2.3-70-g09d2 From 033456e2c507a9b804de56dd258af55f03764334 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:11 +0200 Subject: Coccinelle: Add misc/doubleinit.cocci Find duplicate field initializations. This has a high rate of false positives due to #ifdefs, which Coccinelle is not aware of in a structure initialization. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/misc/doubleinit.cocci | 53 ++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 scripts/coccinelle/misc/doubleinit.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/misc/doubleinit.cocci b/scripts/coccinelle/misc/doubleinit.cocci new file mode 100644 index 00000000000..55d7dc19dfe --- /dev/null +++ b/scripts/coccinelle/misc/doubleinit.cocci @@ -0,0 +1,53 @@ +/// Find duplicate field initializations. This has a high rate of false +/// positives due to #ifdefs, which Coccinelle is not aware of in a structure +/// initialization. +/// +// Confidence: Low +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual org +virtual report + +@r@ +identifier I, s, fld; +position p0,p; +expression E; +@@ + +struct I s =@p0 { ... .fld@p = E, ...}; + +@s@ +identifier I, s, r.fld; +position r.p0,p; +expression E; +@@ + +struct I s =@p0 { ... .fld@p = E, ...}; + +@script:python depends on org@ +p0 << r.p0; +fld << r.fld; +ps << s.p; +pr << r.p; +@@ + +if int(ps[0].line) < int(pr[0].line) or (int(ps[0].line) == int(pr[0].line) and int(ps[0].column) < int(pr[0].column)): + cocci.print_main(fld,p0) + cocci.print_secs("s",ps) + cocci.print_secs("r",pr) + +@script:python depends on report@ +p0 << r.p0; +fld << r.fld; +ps << s.p; +pr << r.p; +@@ + +if int(ps[0].line) < int(pr[0].line) or (int(ps[0].line) == int(pr[0].line) and int(ps[0].column) < int(pr[0].column)): + msg = "%s: first occurrence %s, second occurrence %s" % (fld,ps[0].line,pr[0].line) + coccilib.report.print_report(p0[0],msg) -- cgit v1.2.3-70-g09d2 From 49ab7a39136566eb8312e770031af4182c9f2967 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Tue, 24 Aug 2010 17:39:12 +0200 Subject: Coccinelle: Add misc/ifcol.cocci Find confusingly indented code in or after an if. An if branch should be indented. The code following an if should not be indented. Sometimes, code after an if that is indented is actually intended to be part of the if branch. This has a high rate of false positives, because Coccinelle's column calculation does not distinguish between spaces and tabs, so code that is not visually aligned may be considered to be in the same column. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/misc/ifcol.cocci | 48 +++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 scripts/coccinelle/misc/ifcol.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/misc/ifcol.cocci b/scripts/coccinelle/misc/ifcol.cocci new file mode 100644 index 00000000000..b7ed91dbeb9 --- /dev/null +++ b/scripts/coccinelle/misc/ifcol.cocci @@ -0,0 +1,48 @@ +/// Find confusingly indented code in or after an if. An if branch should +/// be indented. The code following an if should not be indented. +/// Sometimes, code after an if that is indented is actually intended to be +/// part of the if branch. +/// +/// This has a high rate of false positives, because Coccinelle's column +/// calculation does not distinguish between spaces and tabs, so code that +/// is not visually aligned may be considered to be in the same column. +/// +// Confidence: Low +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual org +virtual report + +@r disable braces4@ +position p1,p2; +statement S1,S2; +@@ + +( +if (...) { ... } +| +if (...) S1@p1 S2@p2 +) + +@script:python depends on org@ +p1 << r.p1; +p2 << r.p2; +@@ + +if (p1[0].column == p2[0].column): + cocci.print_main("branch",p1) + cocci.print_secs("after",p2) + +@script:python depends on report@ +p1 << r.p1; +p2 << r.p2; +@@ + +if (p1[0].column == p2[0].column): + msg = "code aligned with following code on line %s" % (p2[0].line) + coccilib.report.print_report(p1[0],msg) -- cgit v1.2.3-70-g09d2 From c94d3fb01fb6db1899cdf53ea4eb9d38e08a08fe Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 23 Aug 2010 12:01:24 -0400 Subject: kbuild: use getopt_long(), not its _only() variant NetBSD lacks getopt_long_only() whereas getopt_long() works just fine. Signed-off-by: Arnaud Lacombe Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 4f0ed5b3a75..4b3ad9b862b 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -466,7 +466,7 @@ int main(int ac, char **av) bindtextdomain(PACKAGE, LOCALEDIR); textdomain(PACKAGE); - while ((opt = getopt_long_only(ac, av, "", long_opts, NULL)) != -1) { + while ((opt = getopt_long(ac, av, "", long_opts, NULL)) != -1) { input_mode = (enum input_mode)opt; switch (opt) { case silentoldconfig: -- cgit v1.2.3-70-g09d2 From 133c5f7c10e4552ba41bcf03b9bda6c4e3413804 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 31 Aug 2010 17:34:37 +0200 Subject: kconfig qconf: port to QT4 A straight forward port to QT4 using qt3to4 and compiling against qt3support * Use pkg-config to detect QT4 which is hopefully portable enough * If no QT4, QT3 will by tried instead * Classes renamed using qt3to4 * If build using QT3 renamed to QT3 class names using defines * ConfigInfoView::menu has to be renamed as QT4 moc strips struct from struct menu and creates a name conflict * QT2 support has been dropped * The hidden options inserted in 39a4897c1bb66e8a36043c105d7fd73d8b32b480 are use in native API Signed-off-by: Alexander Stein Signed-off-by: Michal Marek --- scripts/kconfig/Makefile | 76 ++++++++++++---------- scripts/kconfig/qconf.cc | 162 ++++++++++++++++++++++++++--------------------- scripts/kconfig/qconf.h | 76 +++++++++++----------- 3 files changed, 168 insertions(+), 146 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 06c1c2f80bb..cef3f75e1c2 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -235,40 +235,50 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # QT needs some extra effort... $(obj)/.tmp_qtcheck: @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ + if ! pkg-config --exists QtCore 2> /dev/null; then \ + echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ + pkg-config --exists qt 2> /dev/null && pkg=qt; \ + pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ + if [ -n "$$pkg" ]; then \ + cflags="\$$(shell pkg-config $$pkg --cflags)"; \ + libs="\$$(shell pkg-config $$pkg --libs)"; \ + moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ + dir="$$(pkg-config $$pkg --variable=prefix)"; \ + else \ + for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ + if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ + done; \ + if [ -z "$$dir" ]; then \ + echo "*"; \ + echo "* Unable to find any QT installation. Please make sure that"; \ + echo "* the QT4 or QT3 development package is correctly installed and"; \ + echo "* either qmake can be found or install pkg-config or set"; \ + echo "* the QTDIR environment variable to the correct location."; \ + echo "*"; \ + false; \ + fi; \ + libpath=$$dir/lib; lib=qt; osdir=""; \ + $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ + osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ + test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ + test -f $$libpath/libqt-mt.so && lib=qt-mt; \ + cflags="-I$$dir/include"; \ + libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ + moc="$$dir/bin/moc"; \ + fi; \ + if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ + echo "*"; \ + echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ + echo "*"; \ + moc="/usr/bin/moc"; \ + fi; \ else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo "*"; \ - echo "* Unable to find the QT3 installation. Please make sure that"; \ - echo "* the QT3 development package is correctly installed and"; \ - echo "* either install pkg-config or set the QTDIR environment"; \ - echo "* variable to the correct location."; \ - echo "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ + headerpath="\$$(shell qmake -query QT_INSTALL_HEADERS)"; \ + libpath="\$$(shell qmake -query QT_INSTALL_LIBS)"; \ + binpath="\$$(shell qmake -query QT_INSTALL_BINS)"; \ + cflags="-I$$headerpath -I$$headerpath/QtCore -I$$headerpath/QtGui -I$$headerpath/Qt3Support -DQT3_SUPPORT"; \ + libs="-L$$libpath -Wl,-rpath,$$libpath -lQtCore -lQtGui -lQt3Support"; \ + moc="$$binpath/moc"; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 820df2d1217..88d3874ca8f 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -3,25 +3,42 @@ * Released under the terms of the GNU GPL v2.0. */ -#include +#include + +#if QT_VERSION < 0x040000 #include +#include +#include +#include +#include +#include +#include +#include +#include +#else +#include +#include +#include +#include +#include +#include +#include +#include +#include +#endif + +#include #include #include #include -#include #include -#include -#include #include #include #include #include #include -#include -#include -#include -#include #include +#include #include @@ -39,7 +56,7 @@ static QApplication *configApp; static ConfigSettings *configSettings; -QAction *ConfigMainWindow::saveAction; +Q3Action *ConfigMainWindow::saveAction; static inline QString qgettext(const char* str) { @@ -54,9 +71,9 @@ static inline QString qgettext(const QString& str) /** * Reads a list of integer values from the application settings. */ -QValueList ConfigSettings::readSizes(const QString& key, bool *ok) +Q3ValueList ConfigSettings::readSizes(const QString& key, bool *ok) { - QValueList result; + Q3ValueList result; QStringList entryList = readListEntry(key, ok); QStringList::Iterator it; @@ -69,10 +86,10 @@ QValueList ConfigSettings::readSizes(const QString& key, bool *ok) /** * Writes a list of integer values to the application settings. */ -bool ConfigSettings::writeSizes(const QString& key, const QValueList& value) +bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList& value) { QStringList stringList; - QValueList::ConstIterator it; + Q3ValueList::ConstIterator it; for (it = value.begin(); it != value.end(); ++it) stringList.push_back(QString::number(*it)); @@ -80,7 +97,6 @@ bool ConfigSettings::writeSizes(const QString& key, const QValueList& value } -#if QT_VERSION >= 300 /* * set the new data * TODO check the value @@ -91,7 +107,6 @@ void ConfigItem::okRename(int col) sym_set_string_value(menu->sym, text(dataColIdx).latin1()); listView()->updateList(this); } -#endif /* * update the displayed of a menu entry @@ -195,11 +210,9 @@ void ConfigItem::updateMenu(void) data = sym_get_string_value(sym); -#if QT_VERSION >= 300 int i = list->mapIdx(dataColIdx); if (i >= 0) setRenameEnabled(i, TRUE); -#endif setText(dataColIdx, data); if (type == S_STRING) prompt = QString("%1: %2").arg(prompt).arg(data); @@ -432,7 +445,7 @@ void ConfigList::updateList(ConfigItem* item) if (!rootEntry) { if (mode != listMode) goto update; - QListViewItemIterator it(this); + Q3ListViewItemIterator it(this); ConfigItem* item; for (; it.current(); ++it) { @@ -527,11 +540,9 @@ void ConfigList::changeValue(ConfigItem* item) case S_INT: case S_HEX: case S_STRING: -#if QT_VERSION >= 300 if (colMap[dataColIdx] >= 0) item->startRename(colMap[dataColIdx]); else -#endif parent()->lineEdit->show(item); break; } @@ -563,7 +574,7 @@ void ConfigList::setParentMenu(void) return; setRootMenu(menu_get_parent_menu(rootEntry->parent)); - QListViewItemIterator it(this); + Q3ListViewItemIterator it(this); for (; (item = (ConfigItem*)it.current()); it++) { if (item->menu == oldroot) { setCurrentItem(item); @@ -645,7 +656,7 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu) void ConfigList::keyPressEvent(QKeyEvent* ev) { - QListViewItem* i = currentItem(); + Q3ListViewItem* i = currentItem(); ConfigItem* item; struct menu *menu; enum prop_type type; @@ -811,10 +822,10 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e) { if (e->y() <= header()->geometry().bottom()) { if (!headerPopup) { - QAction *action; + Q3Action *action; - headerPopup = new QPopupMenu(this); - action = new QAction(NULL, _("Show Name"), 0, this); + headerPopup = new Q3PopupMenu(this); + action = new Q3Action(NULL, _("Show Name"), 0, this); action->setToggleAction(TRUE); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowName(bool))); @@ -822,7 +833,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e) action, SLOT(setOn(bool))); action->setOn(showName); action->addTo(headerPopup); - action = new QAction(NULL, _("Show Range"), 0, this); + action = new Q3Action(NULL, _("Show Range"), 0, this); action->setToggleAction(TRUE); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowRange(bool))); @@ -830,7 +841,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e) action, SLOT(setOn(bool))); action->setOn(showRange); action->addTo(headerPopup); - action = new QAction(NULL, _("Show Data"), 0, this); + action = new Q3Action(NULL, _("Show Data"), 0, this); action->setToggleAction(TRUE); connect(action, SIGNAL(toggled(bool)), parent(), SLOT(setShowData(bool))); @@ -914,7 +925,7 @@ void ConfigView::setShowData(bool b) void ConfigList::setAllOpen(bool open) { - QListViewItemIterator it(this); + Q3ListViewItemIterator it(this); for (; it.current(); it++) it.current()->setOpen(open); @@ -937,7 +948,7 @@ void ConfigView::updateListAll(void) } ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name) - : Parent(parent, name), sym(0), menu(0) + : Parent(parent, name), sym(0), _menu(0) { if (name) { configSettings->beginGroup(name); @@ -960,7 +971,7 @@ void ConfigInfoView::setShowDebug(bool b) { if (_showDebug != b) { _showDebug = b; - if (menu) + if (_menu) menuInfo(); else if (sym) symbolInfo(); @@ -970,11 +981,11 @@ void ConfigInfoView::setShowDebug(bool b) void ConfigInfoView::setInfo(struct menu *m) { - if (menu == m) + if (_menu == m) return; - menu = m; + _menu = m; sym = NULL; - if (!menu) + if (!_menu) clear(); else menuInfo(); @@ -1001,11 +1012,11 @@ void ConfigInfoView::menuInfo(void) struct symbol* sym; QString head, debug, help; - sym = menu->sym; + sym = _menu->sym; if (sym) { - if (menu->prompt) { + if (_menu->prompt) { head += ""; - head += print_filter(_(menu->prompt->text)); + head += print_filter(_(_menu->prompt->text)); head += ""; if (sym->name) { head += " ("; @@ -1031,23 +1042,23 @@ void ConfigInfoView::menuInfo(void) debug = debug_info(sym); struct gstr help_gstr = str_new(); - menu_get_ext_help(menu, &help_gstr); + menu_get_ext_help(_menu, &help_gstr); help = print_filter(str_get(&help_gstr)); str_free(&help_gstr); - } else if (menu->prompt) { + } else if (_menu->prompt) { head += ""; - head += print_filter(_(menu->prompt->text)); + head += print_filter(_(_menu->prompt->text)); head += "

"; if (showDebug()) { - if (menu->prompt->visible.expr) { + if (_menu->prompt->visible.expr) { debug += "  dep: "; - expr_print(menu->prompt->visible.expr, expr_print_help, &debug, E_NONE); + expr_print(_menu->prompt->visible.expr, expr_print_help, &debug, E_NONE); debug += "

"; } } } if (showDebug()) - debug += QString().sprintf("defined at %s:%d

", menu->file->name, menu->lineno); + debug += QString().sprintf("defined at %s:%d

", _menu->file->name, _menu->lineno); setText(head + debug + help); } @@ -1150,10 +1161,10 @@ void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char *text += str2; } -QPopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos) +Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos) { - QPopupMenu* popup = Parent::createPopupMenu(pos); - QAction* action = new QAction(NULL, _("Show Debug Info"), 0, popup); + Q3PopupMenu* popup = Parent::createPopupMenu(pos); + Q3Action* action = new Q3Action(NULL, _("Show Debug Info"), 0, popup); action->setToggleAction(TRUE); connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool))); connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool))); @@ -1210,7 +1221,7 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam y = configSettings->readNumEntry("/window y", 0, &ok); if (ok) move(x, y); - QValueList sizes = configSettings->readSizes("/split", &ok); + Q3ValueList sizes = configSettings->readSizes("/split", &ok); if (ok) split->setSizes(sizes); configSettings->endGroup(); @@ -1297,42 +1308,42 @@ ConfigMainWindow::ConfigMainWindow(void) configList->setFocus(); menu = menuBar(); - toolBar = new QToolBar("Tools", this); + toolBar = new Q3ToolBar("Tools", this); - backAction = new QAction("Back", QPixmap(xpm_back), _("Back"), 0, this); + backAction = new Q3Action("Back", QPixmap(xpm_back), _("Back"), 0, this); connect(backAction, SIGNAL(activated()), SLOT(goBack())); backAction->setEnabled(FALSE); - QAction *quitAction = new QAction("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this); + Q3Action *quitAction = new Q3Action("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this); connect(quitAction, SIGNAL(activated()), SLOT(close())); - QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this); + Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this); connect(loadAction, SIGNAL(activated()), SLOT(loadConfig())); - saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this); + saveAction = new Q3Action("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this); connect(saveAction, SIGNAL(activated()), SLOT(saveConfig())); conf_set_changed_callback(conf_changed); // Set saveAction's initial state conf_changed(); - QAction *saveAsAction = new QAction("Save As...", _("Save &As..."), 0, this); + Q3Action *saveAsAction = new Q3Action("Save As...", _("Save &As..."), 0, this); connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs())); - QAction *searchAction = new QAction("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this); + Q3Action *searchAction = new Q3Action("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this); connect(searchAction, SIGNAL(activated()), SLOT(searchConfig())); - QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this); + Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this); connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView())); - QAction *splitViewAction = new QAction("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this); + Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this); connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView())); - QAction *fullViewAction = new QAction("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this); + Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this); connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView())); - QAction *showNameAction = new QAction(NULL, _("Show Name"), 0, this); + Q3Action *showNameAction = new Q3Action(NULL, _("Show Name"), 0, this); showNameAction->setToggleAction(TRUE); connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool))); connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool))); showNameAction->setOn(configView->showName()); - QAction *showRangeAction = new QAction(NULL, _("Show Range"), 0, this); + Q3Action *showRangeAction = new Q3Action(NULL, _("Show Range"), 0, this); showRangeAction->setToggleAction(TRUE); connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool))); connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool))); showRangeAction->setOn(configList->showRange); - QAction *showDataAction = new QAction(NULL, _("Show Data"), 0, this); + Q3Action *showDataAction = new Q3Action(NULL, _("Show Data"), 0, this); showDataAction->setToggleAction(TRUE); connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool))); connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool))); @@ -1345,9 +1356,15 @@ ConfigMainWindow::ConfigMainWindow(void) connect(optGroup, SIGNAL(selected(QAction *)), menuView, SLOT(setOptionMode(QAction *))); - configView->showNormalAction = new QAction(NULL, _("Show Normal Options"), 0, optGroup); - configView->showAllAction = new QAction(NULL, _("Show All Options"), 0, optGroup); - configView->showPromptAction = new QAction(NULL, _("Show Prompt Options"), 0, optGroup); +#if QT_VERSION >= 0x040000 + configView->showNormalAction = new QAction(_("Show Normal Options"), optGroup); + configView->showAllAction = new QAction(_("Show All Options"), optGroup); + configView->showPromptAction = new QAction(_("Show Prompt Options"), optGroup); +#else + configView->showNormalAction = new QAction(_("Show Normal Options"), 0, optGroup); + configView->showAllAction = new QAction(_("Show All Options"), 0, optGroup); + configView->showPromptAction = new QAction(_("Show Prompt Options"), 0, optGroup); +#endif configView->showNormalAction->setToggleAction(TRUE); configView->showNormalAction->setOn(configList->optMode == normalOpt); configView->showAllAction->setToggleAction(TRUE); @@ -1355,15 +1372,15 @@ ConfigMainWindow::ConfigMainWindow(void) configView->showPromptAction->setToggleAction(TRUE); configView->showPromptAction->setOn(configList->optMode == promptOpt); - QAction *showDebugAction = new QAction(NULL, _("Show Debug Info"), 0, this); + Q3Action *showDebugAction = new Q3Action(NULL, _("Show Debug Info"), 0, this); showDebugAction->setToggleAction(TRUE); connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool))); connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool))); showDebugAction->setOn(helpText->showDebug()); - QAction *showIntroAction = new QAction(NULL, _("Introduction"), 0, this); + Q3Action *showIntroAction = new Q3Action(NULL, _("Introduction"), 0, this); connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro())); - QAction *showAboutAction = new QAction(NULL, _("About"), 0, this); + Q3Action *showAboutAction = new Q3Action(NULL, _("About"), 0, this); connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout())); // init tool bar @@ -1377,7 +1394,7 @@ ConfigMainWindow::ConfigMainWindow(void) fullViewAction->addTo(toolBar); // create config menu - QPopupMenu* config = new QPopupMenu(this); + Q3PopupMenu* config = new Q3PopupMenu(this); menu->insertItem(_("&File"), config); loadAction->addTo(config); saveAction->addTo(config); @@ -1386,12 +1403,12 @@ ConfigMainWindow::ConfigMainWindow(void) quitAction->addTo(config); // create edit menu - QPopupMenu* editMenu = new QPopupMenu(this); + Q3PopupMenu* editMenu = new Q3PopupMenu(this); menu->insertItem(_("&Edit"), editMenu); searchAction->addTo(editMenu); // create options menu - QPopupMenu* optionMenu = new QPopupMenu(this); + Q3PopupMenu* optionMenu = new Q3PopupMenu(this); menu->insertItem(_("&Option"), optionMenu); showNameAction->addTo(optionMenu); showRangeAction->addTo(optionMenu); @@ -1399,10 +1416,9 @@ ConfigMainWindow::ConfigMainWindow(void) optionMenu->insertSeparator(); optGroup->addTo(optionMenu); optionMenu->insertSeparator(); - showDebugAction->addTo(optionMenu); // create help menu - QPopupMenu* helpMenu = new QPopupMenu(this); + Q3PopupMenu* helpMenu = new Q3PopupMenu(this); menu->insertSeparator(); menu->insertItem(_("&Help"), helpMenu); showIntroAction->addTo(helpMenu); @@ -1437,7 +1453,7 @@ ConfigMainWindow::ConfigMainWindow(void) showSplitView(); // UI setup done, restore splitter positions - QValueList sizes = configSettings->readSizes("/split1", &ok); + Q3ValueList sizes = configSettings->readSizes("/split1", &ok); if (ok) split1->setSizes(sizes); @@ -1448,7 +1464,7 @@ ConfigMainWindow::ConfigMainWindow(void) void ConfigMainWindow::loadConfig(void) { - QString s = QFileDialog::getOpenFileName(conf_get_configname(), NULL, this); + QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this); if (s.isNull()) return; if (conf_read(QFile::encodeName(s))) @@ -1464,7 +1480,7 @@ void ConfigMainWindow::saveConfig(void) void ConfigMainWindow::saveConfigAs(void) { - QString s = QFileDialog::getSaveFileName(conf_get_configname(), NULL, this); + QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this); if (s.isNull()) return; if (conf_write(QFile::encodeName(s))) diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h index 636a74b23bf..91677d900db 100644 --- a/scripts/kconfig/qconf.h +++ b/scripts/kconfig/qconf.h @@ -3,26 +3,25 @@ * Released under the terms of the GNU GPL v2.0. */ +#if QT_VERSION < 0x040000 #include -#if QT_VERSION >= 300 -#include #else -class QSettings { -public: - void beginGroup(const QString& group) { } - void endGroup(void) { } - bool readBoolEntry(const QString& key, bool def = FALSE, bool* ok = 0) const - { if (ok) *ok = FALSE; return def; } - int readNumEntry(const QString& key, int def = 0, bool* ok = 0) const - { if (ok) *ok = FALSE; return def; } - QString readEntry(const QString& key, const QString& def = QString::null, bool* ok = 0) const - { if (ok) *ok = FALSE; return def; } - QStringList readListEntry(const QString& key, bool* ok = 0) const - { if (ok) *ok = FALSE; return QStringList(); } - template - bool writeEntry(const QString& key, t value) - { return TRUE; } -}; +#include +#endif +#include + +#if QT_VERSION < 0x040000 +#define Q3ValueList QValueList +#define Q3PopupMenu QPopupMenu +#define Q3ListView QListView +#define Q3ListViewItem QListViewItem +#define Q3VBox QVBox +#define Q3TextBrowser QTextBrowser +#define Q3MainWindow QMainWindow +#define Q3Action QAction +#define Q3ToolBar QToolBar +#define Q3ListViewItemIterator QListViewItemIterator +#define Q3FileDialog QFileDialog #endif class ConfigView; @@ -31,11 +30,10 @@ class ConfigItem; class ConfigLineEdit; class ConfigMainWindow; - class ConfigSettings : public QSettings { public: - QValueList readSizes(const QString& key, bool *ok); - bool writeSizes(const QString& key, const QValueList& value); + Q3ValueList readSizes(const QString& key, bool *ok); + bool writeSizes(const QString& key, const Q3ValueList& value); }; enum colIdx { @@ -48,9 +46,9 @@ enum optionMode { normalOpt = 0, allOpt, promptOpt }; -class ConfigList : public QListView { +class ConfigList : public Q3ListView { Q_OBJECT - typedef class QListView Parent; + typedef class Q3ListView Parent; public: ConfigList(ConfigView* p, const char *name = 0); void reinit(void); @@ -135,17 +133,17 @@ public: struct menu *rootEntry; QColorGroup disabledColorGroup; QColorGroup inactivedColorGroup; - QPopupMenu* headerPopup; + Q3PopupMenu* headerPopup; private: int colMap[colNr]; int colRevMap[colNr]; }; -class ConfigItem : public QListViewItem { - typedef class QListViewItem Parent; +class ConfigItem : public Q3ListViewItem { + typedef class Q3ListViewItem Parent; public: - ConfigItem(QListView *parent, ConfigItem *after, struct menu *m, bool v) + ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v) : Parent(parent, after), menu(m), visible(v), goParent(false) { init(); @@ -155,16 +153,14 @@ public: { init(); } - ConfigItem(QListView *parent, ConfigItem *after, bool v) + ConfigItem(Q3ListView *parent, ConfigItem *after, bool v) : Parent(parent, after), menu(0), visible(v), goParent(true) { init(); } ~ConfigItem(void); void init(void); -#if QT_VERSION >= 300 void okRename(int col); -#endif void updateMenu(void); void testUpdateMenu(bool v); ConfigList* listView() const @@ -219,9 +215,9 @@ public: ConfigItem *item; }; -class ConfigView : public QVBox { +class ConfigView : public Q3VBox { Q_OBJECT - typedef class QVBox Parent; + typedef class Q3VBox Parent; public: ConfigView(QWidget* parent, const char *name = 0); ~ConfigView(void); @@ -252,9 +248,9 @@ public: static QAction *showPromptAction; }; -class ConfigInfoView : public QTextBrowser { +class ConfigInfoView : public Q3TextBrowser { Q_OBJECT - typedef class QTextBrowser Parent; + typedef class Q3TextBrowser Parent; public: ConfigInfoView(QWidget* parent, const char *name = 0); bool showDebug(void) const { return _showDebug; } @@ -274,11 +270,11 @@ protected: QString debug_info(struct symbol *sym); static QString print_filter(const QString &str); static void expr_print_help(void *data, struct symbol *sym, const char *str); - QPopupMenu* createPopupMenu(const QPoint& pos); + Q3PopupMenu* createPopupMenu(const QPoint& pos); void contentsContextMenuEvent(QContextMenuEvent *e); struct symbol *sym; - struct menu *menu; + struct menu *_menu; bool _showDebug; }; @@ -302,10 +298,10 @@ protected: struct symbol **result; }; -class ConfigMainWindow : public QMainWindow { +class ConfigMainWindow : public Q3MainWindow { Q_OBJECT - static QAction *saveAction; + static Q3Action *saveAction; static void conf_changed(void); public: ConfigMainWindow(void); @@ -334,8 +330,8 @@ protected: ConfigView *configView; ConfigList *configList; ConfigInfoView *helpText; - QToolBar *toolBar; - QAction *backAction; + Q3ToolBar *toolBar; + Q3Action *backAction; QSplitter* split1; QSplitter* split2; }; -- cgit v1.2.3-70-g09d2 From f9810a82536e0c730c57844753e6c08cc7f77881 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 10 Aug 2010 19:39:20 +0100 Subject: ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl On ARM, we have two ABIs, and the ABI used is controlled via a config option. Object files built with one ABI can't be merged with object files built with the other ABI. So, record_mcount.pl needs to use the same compiler flags as the kernel when generating the object file with the mcount locations. Ensure this by passing CFLAGS to the script. Acked-by: Steven Rostedt Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- scripts/Makefile.build | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index a1a5cf95a68..108eeb99351 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -212,7 +212,8 @@ ifdef CONFIG_FTRACE_MCOUNT_RECORD cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ - "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ + "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ + "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; endif -- cgit v1.2.3-70-g09d2 From 3b6c223b1b97ad60bbb0f4efda57d649414ac2a2 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 10 Aug 2010 19:43:28 +0100 Subject: ARM: 6318/1: ftrace: fix and update dynamic ftrace This adds mcount recording and updates dynamic ftrace for ARM to work with the new ftrace dyamic tracing implementation. It also adds support for the mcount format used by newer ARM compilers. With dynamic tracing, mcount() is implemented as a nop. Callsites are patched on startup with nops, and dynamically patched to call to the ftrace_caller() routine as needed. Acked-by: Steven Rostedt [recordmcount.pl change] Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/include/asm/ftrace.h | 19 ++++- arch/arm/kernel/entry-common.S | 37 +++++++--- arch/arm/kernel/ftrace.c | 155 ++++++++++++++++++++++++++++------------- scripts/recordmcount.pl | 2 + 4 files changed, 155 insertions(+), 58 deletions(-) (limited to 'scripts') diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 103f7ee9731..4a56a2ee067 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -2,12 +2,29 @@ #define _ASM_ARM_FTRACE #ifdef CONFIG_FUNCTION_TRACER -#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ extern void mcount(void); extern void __gnu_mcount_nc(void); + +#ifdef CONFIG_DYNAMIC_FTRACE +struct dyn_arch_ftrace { +#ifdef CONFIG_OLD_MCOUNT + bool old_mcount; +#endif +}; + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +extern void ftrace_caller_old(void); +extern void ftrace_call_old(void); +#endif + #endif #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f5e75de0203..e02790f2887 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -127,6 +127,10 @@ ENDPROC(ret_from_fork) * clobber the ip register. This is OK because the ARM calling convention * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) + * + * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" + * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see + * arch/arm/kernel/ftrace.c). */ #ifndef CONFIG_OLD_MCOUNT @@ -136,30 +140,45 @@ ENDPROC(ret_from_fork) #endif #ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(mcount) +ENTRY(__gnu_mcount_nc) + mov ip, lr + ldmia sp!, {lr} + mov pc, ip +ENDPROC(__gnu_mcount_nc) + +ENTRY(ftrace_caller) stmdb sp!, {r0-r3, lr} mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE + ldr r1, [sp, #20] - .globl mcount_call -mcount_call: + .global ftrace_call +ftrace_call: bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + ldmia sp!, {r0-r3, ip, lr} + mov pc, ip +ENDPROC(ftrace_caller) + +#ifdef CONFIG_OLD_MCOUNT +ENTRY(mcount) + stmdb sp!, {lr} + ldr lr, [fp, #-4] + ldmia sp!, {pc} ENDPROC(mcount) -ENTRY(ftrace_caller) +ENTRY(ftrace_caller_old) stmdb sp!, {r0-r3, lr} ldr r1, [fp, #-4] mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - .globl ftrace_call -ftrace_call: + .globl ftrace_call_old +ftrace_call_old: bl ftrace_stub ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} -ENDPROC(ftrace_caller) +ENDPROC(ftrace_caller_old) +#endif #else diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 0298286ad4a..f09014cfbf2 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -2,102 +2,161 @@ * Dynamic function tracing support. * * Copyright (C) 2008 Abhishek Sagar + * Copyright (C) 2010 Rabin Vincent * * For licencing details, see COPYING. * * Defines low-level handling of mcount calls when the kernel * is compiled with the -pg flag. When using dynamic ftrace, the - * mcount call-sites get patched lazily with NOP till they are - * enabled. All code mutation routines here take effect atomically. + * mcount call-sites get patched with NOP till they are enabled. + * All code mutation routines here are called under stop_machine(). */ #include +#include #include #include -#define PC_OFFSET 8 -#define BL_OPCODE 0xeb000000 -#define BL_OFFSET_MASK 0x00ffffff +#define NOP 0xe8bd4000 /* pop {lr} */ -static unsigned long bl_insn; -static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ +#ifdef CONFIG_OLD_MCOUNT +#define OLD_MCOUNT_ADDR ((unsigned long) mcount) +#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) -unsigned char *ftrace_nop_replace(void) +#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ + +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) +{ + return rec->arch.old_mcount ? OLD_NOP : NOP; +} + +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + if (!rec->arch.old_mcount) + return addr; + + if (addr == MCOUNT_ADDR) + addr = OLD_MCOUNT_ADDR; + else if (addr == FTRACE_ADDR) + addr = OLD_FTRACE_ADDR; + + return addr; +} +#else +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) +{ + return NOP; +} + +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) { - return (char *)&NOP; + return addr; } +#endif /* construct a branch (BL) instruction to addr */ -unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { long offset; - offset = (long)addr - (long)(pc + PC_OFFSET); + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace * doesn't generate branches outside of kernel text. */ WARN_ON_ONCE(1); - return NULL; + return 0; } - offset = (offset >> 2) & BL_OFFSET_MASK; - bl_insn = BL_OPCODE | offset; - return (unsigned char *)&bl_insn; -} -int ftrace_modify_code(unsigned long pc, unsigned char *old_code, - unsigned char *new_code) -{ - unsigned long err = 0, replaced = 0, old, new; + offset = (offset >> 2) & 0x00ffffff; - old = *(unsigned long *)old_code; - new = *(unsigned long *)new_code; + return 0xeb000000 | offset; +} - __asm__ __volatile__ ( - "1: ldr %1, [%2] \n" - " cmp %1, %4 \n" - "2: streq %3, [%2] \n" - " cmpne %1, %3 \n" - " movne %0, #2 \n" - "3:\n" +static int ftrace_modify_code(unsigned long pc, unsigned long old, + unsigned long new) +{ + unsigned long replaced; - ".pushsection .fixup, \"ax\"\n" - "4: mov %0, #1 \n" - " b 3b \n" - ".popsection\n" + if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) + return -EFAULT; - ".pushsection __ex_table, \"a\"\n" - " .long 1b, 4b \n" - " .long 2b, 4b \n" - ".popsection\n" + if (replaced != old) + return -EINVAL; - : "=r"(err), "=r"(replaced) - : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) - : "memory"); + if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE)) + return -EPERM; - if (!err && (replaced == old)) - flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); + flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); - return err; + return 0; } int ftrace_update_ftrace_func(ftrace_func_t func) { - int ret; unsigned long pc, old; - unsigned char *new; + unsigned long new; + int ret; pc = (unsigned long)&ftrace_call; memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + + ret = ftrace_modify_code(pc, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) { + pc = (unsigned long)&ftrace_call_old; + memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + + ret = ftrace_modify_code(pc, old, new); + } +#endif + + return ret; +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long new, old; + unsigned long ip = rec->ip; + + old = ftrace_nop_replace(rec); + new = ftrace_call_replace(ip, adjust_address(rec, addr)); + + return ftrace_modify_code(rec->ip, old, new); +} + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long ip = rec->ip; + unsigned long old; + unsigned long new; + int ret; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (ret == -EINVAL && addr == MCOUNT_ADDR) { + rec->arch.old_mcount = true; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + } +#endif + return ret; } -/* run from ftrace_init with irqs disabled */ int __init ftrace_dyn_arch_init(void *data) { - ftrace_mcount_set(data); + *(unsigned long *)data = 0; + return 0; } diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index e67f0548608..022d4679b1b 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -270,6 +270,8 @@ if ($arch eq "x86_64") { } elsif ($arch eq "arm") { $alignment = 2; $section_type = '%progbits'; + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24)" . + "\\s+(__gnu_mcount_nc|mcount)\$"; } elsif ($arch eq "ia64") { $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; -- cgit v1.2.3-70-g09d2 From 72dc43a9eb123d2742bd413c80dbeab0c588f622 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 10 Aug 2010 19:52:35 +0100 Subject: ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace Handle the different nop and call instructions for Thumb-2. Also, we need to adjust the recorded mcount_loc addresses because they have the lsb set. Cc: Catalin Marinas Acked-by: Steven Rostedt [recordmcount.pl change] Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/include/asm/ftrace.h | 3 ++- arch/arm/kernel/ftrace.c | 33 +++++++++++++++++++++++++++++++++ scripts/recordmcount.pl | 2 +- 3 files changed, 36 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 4a56a2ee067..f89515adac6 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -18,7 +18,8 @@ struct dyn_arch_ftrace { static inline unsigned long ftrace_call_adjust(unsigned long addr) { - return addr; + /* With Thumb-2, the recorded addresses have the lsb set */ + return addr & ~1; } extern void ftrace_caller_old(void); diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index f09014cfbf2..971ac8c36ea 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -18,7 +18,11 @@ #include #include +#ifdef CONFIG_THUMB2_KERNEL +#define NOP 0xeb04f85d /* pop.w {lr} */ +#else #define NOP 0xe8bd4000 /* pop {lr} */ +#endif #ifdef CONFIG_OLD_MCOUNT #define OLD_MCOUNT_ADDR ((unsigned long) mcount) @@ -56,6 +60,34 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) #endif /* construct a branch (BL) instruction to addr */ +#ifdef CONFIG_THUMB2_KERNEL +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + unsigned long s, j1, j2, i1, i2, imm10, imm11; + unsigned long first, second; + long offset; + + offset = (long)addr - (long)(pc + 4); + if (offset < -16777216 || offset > 16777214) { + WARN_ON_ONCE(1); + return 0; + } + + s = (offset >> 24) & 0x1; + i1 = (offset >> 23) & 0x1; + i2 = (offset >> 22) & 0x1; + imm10 = (offset >> 12) & 0x3ff; + imm11 = (offset >> 1) & 0x7ff; + + j1 = (!i1) ^ s; + j2 = (!i2) ^ s; + + first = 0xf000 | (s << 10) | imm10; + second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + + return (second << 16) | first; +} +#else static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { long offset; @@ -73,6 +105,7 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) return 0xeb000000 | offset; } +#endif static int ftrace_modify_code(unsigned long pc, unsigned long old, unsigned long new) diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 022d4679b1b..1d7963f4ee7 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -270,7 +270,7 @@ if ($arch eq "x86_64") { } elsif ($arch eq "arm") { $alignment = 2; $section_type = '%progbits'; - $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24)" . + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" . "\\s+(__gnu_mcount_nc|mcount)\$"; } elsif ($arch eq "ia64") { -- cgit v1.2.3-70-g09d2 From c3e2f196f9862cd75cb7f495a3cd1f1bbb82bb40 Mon Sep 17 00:00:00 2001 From: Michael Prokop Date: Mon, 6 Sep 2010 11:57:19 +0200 Subject: scripts/setlocalversion: update comment A tagged repository state isn't enough, git describe only looks at signed or annotated tags (git tag -a/-s). This documentation update makes sure the comment matches the current behaviour. Signed-off-by: Michael Prokop Signed-off-by: Michal Marek --- scripts/setlocalversion | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/setlocalversion b/scripts/setlocalversion index e90a91cc518..dc54b198295 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -160,8 +160,10 @@ if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then # full scm version string res="$res$(scm_version)" else - # apped a plus sign if the repository is not in a clean tagged - # state and LOCALVERSION= is not specified + # append a plus sign if the repository is not in a clean + # annotated or signed tagged state (as git describe only + # looks at signed or annotated tags - git tag -a/-s) and + # LOCALVERSION= is not specified if test "${LOCALVERSION+set}" != "set"; then scm=$(scm_version --short) res="$res${scm:++}" -- cgit v1.2.3-70-g09d2 From 242c5ab08c8414539ed57bde90e93accd8353825 Mon Sep 17 00:00:00 2001 From: Guillem Jover Date: Fri, 3 Sep 2010 04:33:28 +0200 Subject: kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it Avoid an error when doing cp over the image when it does not contain the full path to the file. Signed-off-by: Guillem Jover Signed-off-by: Michal Marek --- scripts/package/builddeb | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 5f1e2fc7f17..49b74e1ee12 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -66,7 +66,9 @@ else cp System.map "$tmpdir/boot/System.map-$version" cp .config "$tmpdir/boot/config-$version" # Not all arches include the boot path in KBUILD_IMAGE - if ! cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"; then + if [ -e $KBUILD_IMAGE ]; then + cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version" + else cp arch/$ARCH/boot/$KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version" fi fi -- cgit v1.2.3-70-g09d2 From 76a136c4a6bde90af8c899701cc1f0997af2f60a Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Wed, 1 Sep 2010 17:39:27 +0200 Subject: xconfig: Change the titlebar if using Qt3 Qt4 is now used by default and will get more testing. In case someone still uses Qt3 and reports a bug, make it easy to recognize that this is Qt3. Acked-by: Alexander Stein Signed-off-by: Michal Marek --- scripts/kconfig/qconf.cc | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index 88d3874ca8f..a04e4517ead 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1274,8 +1274,14 @@ ConfigMainWindow::ConfigMainWindow(void) char title[256]; QDesktopWidget *d = configApp->desktop(); - snprintf(title, sizeof(title), _("Linux Kernel v%s Configuration"), - getenv("KERNELVERSION")); + snprintf(title, sizeof(title), _("Linux Kernel v%s Configuration%s"), + getenv("KERNELVERSION"), +#if QT_VERSION < 0x040000 + " (Qt3)" +#else + "" +#endif + ); setCaption(title); width = configSettings->readNumEntry("/window width", d->width() - 64); -- cgit v1.2.3-70-g09d2 From 71d8066265896a6498a4de1bed80dea8dc5daead Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Wed, 1 Sep 2010 11:21:30 -0400 Subject: kbuild: fix oldnoconfig to do the right thing Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on if (input_mode == nonint_oldconfig || input_mode == oldnoconfig) { if (input_mode == nonint_oldconfig && sym->name && !sym_is_choice_value(sym)) { to avoid oldnoconfig chugging through the else stanza. Fix that to restore expected behaviour (which I've confirmed in the Fedora kernel build that the configs end up looking the same.) Signed-off-by: Kyle McMartin Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 4b3ad9b862b..d56131c0b3c 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -427,7 +427,7 @@ static void check_conf(struct menu *menu) if (sym->name && !sym_is_choice_value(sym)) { printf("CONFIG_%s\n", sym->name); } - } else { + } else if (input_mode != oldnoconfig) { if (!conf_cnt++) printf(_("*\n* Restart config...\n*\n")); rootEntry = menu_get_parent_menu(menu); -- cgit v1.2.3-70-g09d2 From 1f3a66889c4c80c821f3eadf899c140e91452f8e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 11 Sep 2010 15:55:12 -0700 Subject: kernel-doc: ignore case when stripping attributes There are valid attributes that could have upper case letters, but we still want to remove, like for example __attribute__((aligned(NETDEV_ALIGN))) as encountered in the wireless code. Signed-off-by: Johannes Berg Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 102e1235fd5..a68240c188f 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1679,7 +1679,7 @@ sub check_sections($$$$$$) { foreach $px (0 .. $#prms) { $prm_clean = $prms[$px]; $prm_clean =~ s/\[.*\]//; - $prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//; + $prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//i; # ignore array size in a parameter string; # however, the original param string may contain # spaces, e.g.: addr[6 + 2] -- cgit v1.2.3-70-g09d2 From eda603f6cdba4b14dbf80531fab2fe545232e7a0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 11 Sep 2010 15:55:22 -0700 Subject: docbook: warn on unused doc entries When you don't use !E or !I but only !F, then it's very easy to miss including some functions, structs etc. in documentation. To help finding which ones were missed, allow printing out the unused ones as warnings. For example, using this on mac80211 yields a lot of warnings like this: Warning: didn't use docs for DOC: mac80211 workqueue Warning: didn't use docs for ieee80211_max_queues Warning: didn't use docs for ieee80211_bss_change Warning: didn't use docs for ieee80211_bss_conf when generating the documentation for it. Signed-off-by: Johannes Berg Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/kernel-doc-nano-HOWTO.txt | 5 ++ scripts/basic/docproc.c | 129 +++++++++++++++++++++++++++++++- scripts/kernel-doc | 52 ++++++++++++- 3 files changed, 183 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 27a52b35d55..3d8a97747f7 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -345,5 +345,10 @@ documentation, in , for the functions listed. section titled
from . Spaces are allowed in
; do not quote the
. +!C is replaced by nothing, but makes the tools check that +all DOC: sections and documented functions, symbols, etc. are used. +This makes sense to use when you use !F/!P only and want to verify +that all documentation is included. + Tim. */ diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c index 79ab973fb43..fc3b18d844a 100644 --- a/scripts/basic/docproc.c +++ b/scripts/basic/docproc.c @@ -34,12 +34,14 @@ * */ +#define _GNU_SOURCE #include #include #include #include #include #include +#include #include #include @@ -54,6 +56,7 @@ typedef void FILEONLY(char * file); FILEONLY *internalfunctions; FILEONLY *externalfunctions; FILEONLY *symbolsonly; +FILEONLY *findall; typedef void FILELINE(char * file, char * line); FILELINE * singlefunctions; @@ -65,12 +68,30 @@ FILELINE * docsection; #define KERNELDOCPATH "scripts/" #define KERNELDOC "kernel-doc" #define DOCBOOK "-docbook" +#define LIST "-list" #define FUNCTION "-function" #define NOFUNCTION "-nofunction" #define NODOCSECTIONS "-no-doc-sections" static char *srctree, *kernsrctree; +static char **all_list = NULL; +static int all_list_len = 0; + +static void consume_symbol(const char *sym) +{ + int i; + + for (i = 0; i < all_list_len; i++) { + if (!all_list[i]) + continue; + if (strcmp(sym, all_list[i])) + continue; + all_list[i] = NULL; + break; + } +} + static void usage (void) { fprintf(stderr, "Usage: docproc {doc|depend} file\n"); @@ -248,6 +269,7 @@ static void docfunctions(char * filename, char * type) struct symfile * sym = &symfilelist[i]; for (j=0; j < sym->symbolcnt; j++) { vec[idx++] = type; + consume_symbol(sym->symbollist[j].name); vec[idx++] = sym->symbollist[j].name; } } @@ -287,6 +309,11 @@ static void singfunc(char * filename, char * line) vec[idx++] = &line[i]; } } + for (i = 0; i < idx; i++) { + if (strcmp(vec[i], FUNCTION)) + continue; + consume_symbol(vec[i + 1]); + } vec[idx++] = filename; vec[idx] = NULL; exec_kernel_doc(vec); @@ -306,6 +333,10 @@ static void docsect(char *filename, char *line) if (*s == '\n') *s = '\0'; + asprintf(&s, "DOC: %s", line); + consume_symbol(s); + free(s); + vec[0] = KERNELDOC; vec[1] = DOCBOOK; vec[2] = FUNCTION; @@ -315,6 +346,84 @@ static void docsect(char *filename, char *line) exec_kernel_doc(vec); } +static void find_all_symbols(char *filename) +{ + char *vec[4]; /* kerneldoc -list file NULL */ + pid_t pid; + int ret, i, count, start; + char real_filename[PATH_MAX + 1]; + int pipefd[2]; + char *data, *str; + size_t data_len = 0; + + vec[0] = KERNELDOC; + vec[1] = LIST; + vec[2] = filename; + vec[3] = NULL; + + if (pipe(pipefd)) { + perror("pipe"); + exit(1); + } + + switch (pid=fork()) { + case -1: + perror("fork"); + exit(1); + case 0: + close(pipefd[0]); + dup2(pipefd[1], 1); + memset(real_filename, 0, sizeof(real_filename)); + strncat(real_filename, kernsrctree, PATH_MAX); + strncat(real_filename, "/" KERNELDOCPATH KERNELDOC, + PATH_MAX - strlen(real_filename)); + execvp(real_filename, vec); + fprintf(stderr, "exec "); + perror(real_filename); + exit(1); + default: + close(pipefd[1]); + data = malloc(4096); + do { + while ((ret = read(pipefd[0], + data + data_len, + 4096)) > 0) { + data_len += ret; + data = realloc(data, data_len + 4096); + } + } while (ret == -EAGAIN); + if (ret != 0) { + perror("read"); + exit(1); + } + waitpid(pid, &ret ,0); + } + if (WIFEXITED(ret)) + exitstatus |= WEXITSTATUS(ret); + else + exitstatus = 0xff; + + count = 0; + /* poor man's strtok, but with counting */ + for (i = 0; i < data_len; i++) { + if (data[i] == '\n') { + count++; + data[i] = '\0'; + } + } + start = all_list_len; + all_list_len += count; + all_list = realloc(all_list, sizeof(char *) * all_list_len); + str = data; + for (i = 0; i < data_len && start != all_list_len; i++) { + if (data[i] == '\0') { + all_list[start] = str; + str = data + i + 1; + start++; + } + } +} + /* * Parse file, calling action specific functions for: * 1) Lines containing !E @@ -322,7 +431,8 @@ static void docsect(char *filename, char *line) * 3) Lines containing !D * 4) Lines containing !F * 5) Lines containing !P - * 6) Default lines - lines not matching the above + * 6) Lines containing !C + * 7) Default lines - lines not matching the above */ static void parse_file(FILE *infile) { @@ -365,6 +475,12 @@ static void parse_file(FILE *infile) s++; docsection(line + 2, s); break; + case 'C': + while (*s && !isspace(*s)) s++; + *s = '\0'; + if (findall) + findall(line+2); + break; default: defaultline(line); } @@ -380,6 +496,7 @@ static void parse_file(FILE *infile) int main(int argc, char *argv[]) { FILE * infile; + int i; srctree = getenv("SRCTREE"); if (!srctree) @@ -415,6 +532,7 @@ int main(int argc, char *argv[]) symbolsonly = find_export_symbols; singlefunctions = noaction2; docsection = noaction2; + findall = find_all_symbols; parse_file(infile); /* Rewind to start from beginning of file again */ @@ -425,8 +543,16 @@ int main(int argc, char *argv[]) symbolsonly = printline; singlefunctions = singfunc; docsection = docsect; + findall = NULL; parse_file(infile); + + for (i = 0; i < all_list_len; i++) { + if (!all_list[i]) + continue; + fprintf(stderr, "Warning: didn't use docs for %s\n", + all_list[i]); + } } else if (strcmp("depend", argv[1]) == 0) { @@ -439,6 +565,7 @@ int main(int argc, char *argv[]) symbolsonly = adddep; singlefunctions = adddep2; docsection = adddep2; + findall = adddep; parse_file(infile); printf("\n"); } diff --git a/scripts/kernel-doc b/scripts/kernel-doc index a68240c188f..cdb6dc1f645 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -44,12 +44,13 @@ use strict; # Note: This only supports 'c'. # usage: -# kernel-doc [ -docbook | -html | -text | -man ] [ -no-doc-sections ] +# kernel-doc [ -docbook | -html | -text | -man | -list ] [ -no-doc-sections ] # [ -function funcname [ -function funcname ...] ] c file(s)s > outputfile # or # [ -nofunction funcname [ -function funcname ...] ] c file(s)s > outputfile # # Set output format using one of -docbook -html -text or -man. Default is man. +# The -list format is for internal use by docproc. # # -no-doc-sections # Do not output DOC: sections @@ -210,9 +211,16 @@ my %highlights_text = ( $type_constant, "\$1", $type_param, "\$1" ); my $blankline_text = ""; +# list mode +my %highlights_list = ( $type_constant, "\$1", + $type_func, "\$1", + $type_struct, "\$1", + $type_param, "\$1" ); +my $blankline_list = ""; sub usage { - print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man ] [ -no-doc-sections ]\n"; + print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man | -list ]\n"; + print " [ -no-doc-sections ]\n"; print " [ -function funcname [ -function funcname ...] ]\n"; print " [ -nofunction funcname [ -nofunction funcname ...] ]\n"; print " c source file(s) > outputfile\n"; @@ -318,6 +326,10 @@ while ($ARGV[0] =~ m/^-(.*)/) { $output_mode = "xml"; %highlights = %highlights_xml; $blankline = $blankline_xml; + } elsif ($cmd eq "-list") { + $output_mode = "list"; + %highlights = %highlights_list; + $blankline = $blankline_list; } elsif ($cmd eq "-gnome") { $output_mode = "gnome"; %highlights = %highlights_gnome; @@ -1361,6 +1373,42 @@ sub output_blockhead_text(%) { } } +## list mode output functions + +sub output_function_list(%) { + my %args = %{$_[0]}; + + print $args{'function'} . "\n"; +} + +# output enum in list +sub output_enum_list(%) { + my %args = %{$_[0]}; + print $args{'enum'} . "\n"; +} + +# output typedef in list +sub output_typedef_list(%) { + my %args = %{$_[0]}; + print $args{'typedef'} . "\n"; +} + +# output struct as list +sub output_struct_list(%) { + my %args = %{$_[0]}; + + print $args{'struct'} . "\n"; +} + +sub output_blockhead_list(%) { + my %args = %{$_[0]}; + my ($parameter, $section); + + foreach $section (@{$args{'sectionlist'}}) { + print "DOC: $section\n"; + } +} + ## # generic output function for all types (function, struct/union, typedef, enum); # calls the generated, variable output_ function name based on -- cgit v1.2.3-70-g09d2 From aee08ed499d65f78373b716fcacefcde1ceb7ade Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 10 Sep 2010 01:32:50 -0700 Subject: nconfig: Fix help for choice menus When getting the help for a choice menu with a help section (for example the "Choose SLAB allocator" menu) nconfig pops up a window with nothing inside it. This is due to show_help() passing an empty string to show_scroll_win()'s 3rd argument. The option really does have help though, but it isn't a config symbol, so just add the help text for the option, and don't try to add anything else like the config option name. Signed-off-by: Stephen Boyd Acked-by: Nir Tzachar Signed-off-by: Michal Marek --- scripts/kconfig/nconf.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 18a215de9f3..d4d1fa696c9 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -1265,6 +1265,8 @@ static void show_help(struct menu *menu) str_append(&help, _(menu_get_help(menu))); str_append(&help, "\n"); get_symbol_str(&help, menu->sym); + } else { + str_append(&help, _(menu_get_help(menu))); } } else { str_append(&help, nohelp_text); -- cgit v1.2.3-70-g09d2 From 20f4ad8a19ad01405f9d6b3110d6eb93666ae21e Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Fri, 10 Sep 2010 19:01:14 +0200 Subject: Fix QT4 moc, cflags libs detection on dual QT3/Qt4 systems On system with QT3 and QT4 qmake in PATH may be from QT3. So we use pkg-config for proper QT4 detection. By reqesting cflags and libs for either QtCore, QtGui and QtSupport include dirs and libs get listed several times, but so we won't mis anything Signed-off-by: Alexander Stein Acked-by: Randy Dunlap Signed-off-by: Michal Marek --- scripts/kconfig/Makefile | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index cef3f75e1c2..996059ef1c4 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -273,12 +273,10 @@ $(obj)/.tmp_qtcheck: moc="/usr/bin/moc"; \ fi; \ else \ - headerpath="\$$(shell qmake -query QT_INSTALL_HEADERS)"; \ - libpath="\$$(shell qmake -query QT_INSTALL_LIBS)"; \ - binpath="\$$(shell qmake -query QT_INSTALL_BINS)"; \ - cflags="-I$$headerpath -I$$headerpath/QtCore -I$$headerpath/QtGui -I$$headerpath/Qt3Support -DQT3_SUPPORT"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -lQtCore -lQtGui -lQt3Support"; \ - moc="$$binpath/moc"; \ + cflags="\$$(shell pkg-config QtCore --cflags) \$$(shell pkg-config QtGui --cflags) \$$(shell pkg-config Qt3Support --cflags)"; \ + libs="\$$(shell pkg-config QtCore --libs) \$$(shell pkg-config QtGui --libs) \$$(shell pkg-config Qt3Support --libs)"; \ + binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \ + moc="$$binpath/bin/moc"; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ -- cgit v1.2.3-70-g09d2 From 458452f4a9b61228cf48a4232a19c8d7d686c11b Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 13 Sep 2010 13:41:31 +0200 Subject: kconfig: Simplify Makefile for xconfig Signed-off-by: Michal Marek --- scripts/kconfig/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 996059ef1c4..3fbfe98be2b 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -273,8 +273,8 @@ $(obj)/.tmp_qtcheck: moc="/usr/bin/moc"; \ fi; \ else \ - cflags="\$$(shell pkg-config QtCore --cflags) \$$(shell pkg-config QtGui --cflags) \$$(shell pkg-config Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore --libs) \$$(shell pkg-config QtGui --libs) \$$(shell pkg-config Qt3Support --libs)"; \ + cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ + libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \ moc="$$binpath/bin/moc"; \ fi; \ -- cgit v1.2.3-70-g09d2 From cec1921ec9a91b9bc7c083b6ebe47c17552b9a81 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Mon, 13 Sep 2010 12:55:56 -0700 Subject: scripts/kconfig/gconf.glade Update broken web addresses. As discussed, remove the DOCTYPE declaration since libglade validates the file against itself.. Signed-off-by: Justin P. Mattock Signed-off-by: Michal Marek --- scripts/kconfig/gconf.glade | 1 - 1 file changed, 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/gconf.glade b/scripts/kconfig/gconf.glade index d52b0a75d82..aa483cb3275 100644 --- a/scripts/kconfig/gconf.glade +++ b/scripts/kconfig/gconf.glade @@ -1,5 +1,4 @@ - -- cgit v1.2.3-70-g09d2 From 8baefd30b5b0101aa07aa75da44a9eee881eed28 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Tue, 24 Aug 2010 00:14:47 -0400 Subject: kconfig: replace a `switch()' statement by a more flexible `if()' statement With the upcoming dynamical configuration prefix, we can no longer assume that the prefix will start by a 'C'. As such, we can no longer hardcode this value in the `case ...:', so replace the `switch() { ... }' statement by a more flexible 'if () { ... }' statement. Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/confdata.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index dc11d51bd8b..d9181de7892 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -221,8 +221,7 @@ load: while (fgets(line, sizeof(line), in)) { conf_lineno++; sym = NULL; - switch (line[0]) { - case '#': + if (line[0] == '#') { if (memcmp(line + 2, "CONFIG_", 7)) continue; p = strchr(line + 9, ' '); @@ -254,12 +253,7 @@ load: default: ; } - break; - case 'C': - if (memcmp(line, "CONFIG_", 7)) { - conf_warning("unexpected data"); - continue; - } + } else if (memcmp(line, "CONFIG_", 7) == 0) { p = strchr(line + 7, '='); if (!p) continue; @@ -286,12 +280,9 @@ load: } if (conf_set_sym_val(sym, def, def_flags, p)) continue; - break; - case '\r': - case '\n': - break; - default: - conf_warning("unexpected data"); + } else { + if (line[0] != '\r' && line[0] != '\n') + conf_warning("unexpected data"); continue; } if (sym && sym_is_choice_value(sym)) { -- cgit v1.2.3-70-g09d2 From 59dfa24da7cb02b3ccc39f5e74b74fe26ea9626a Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 21 Aug 2010 00:43:46 -0400 Subject: kconfig: rephrase help text not to mention the internal prefix Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/mconf.c | 10 +++++----- scripts/kconfig/nconf.c | 12 ++++++------ 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index d2f6e056c05..5c3d0c4b810 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -232,7 +232,7 @@ save_config_help[] = N_( "leave this blank.\n"), search_help[] = N_( "\n" - "Search for CONFIG_ symbols and display their relations.\n" + "Search for symbols and display their relations.\n" "Regular expressions are allowed.\n" "Example: search for \"^FOO\"\n" "Result:\n" @@ -249,7 +249,7 @@ search_help[] = N_( "Selected by: BAR\n" "-----------------------------------------------------------------\n" "o The line 'Prompt:' shows the text used in the menu structure for\n" - " this CONFIG_ symbol\n" + " this symbol\n" "o The 'Defined at' line tell at what file / line number the symbol\n" " is defined\n" "o The 'Depends on:' line tell what symbols needs to be defined for\n" @@ -265,9 +265,9 @@ search_help[] = N_( "Only relevant lines are shown.\n" "\n\n" "Search examples:\n" - "Examples: USB => find all CONFIG_ symbols containing USB\n" - " ^USB => find all CONFIG_ symbols starting with USB\n" - " USB$ => find all CONFIG_ symbols ending with USB\n" + "Examples: USB => find all symbols containing USB\n" + " ^USB => find all symbols starting with USB\n" + " USB$ => find all symbols ending with USB\n" "\n"); static int indent; diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 18a215de9f3..b8a9f37b036 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -217,8 +217,8 @@ save_config_help[] = N_( "leave this blank.\n"), search_help[] = N_( "\n" -"Search for CONFIG_ symbols and display their relations.\n" -"Regular expressions are allowed.\n" +"Search for symbols and display their relations. Regular expressions\n" +"are allowed.\n" "Example: search for \"^FOO\"\n" "Result:\n" "-----------------------------------------------------------------\n" @@ -234,7 +234,7 @@ search_help[] = N_( "Selected by: BAR\n" "-----------------------------------------------------------------\n" "o The line 'Prompt:' shows the text used in the menu structure for\n" -" this CONFIG_ symbol\n" +" this symbol\n" "o The 'Defined at' line tell at what file / line number the symbol\n" " is defined\n" "o The 'Depends on:' line tell what symbols needs to be defined for\n" @@ -250,9 +250,9 @@ search_help[] = N_( "Only relevant lines are shown.\n" "\n\n" "Search examples:\n" -"Examples: USB = > find all CONFIG_ symbols containing USB\n" -" ^USB => find all CONFIG_ symbols starting with USB\n" -" USB$ => find all CONFIG_ symbols ending with USB\n" +"Examples: USB = > find all symbols containing USB\n" +" ^USB => find all symbols starting with USB\n" +" USB$ => find all symbols ending with USB\n" "\n"); struct mitem { -- cgit v1.2.3-70-g09d2 From ffb5957bc48f64f0773fd3fbc43cb9bb9b38e270 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 14 Aug 2010 23:57:43 -0400 Subject: kconfig: allow build-time definition of the internal config prefix Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/conf.c | 2 +- scripts/kconfig/confdata.c | 48 ++++++++++++++++++++++++++-------------------- scripts/kconfig/lkc.h | 3 +++ scripts/kconfig/mconf.c | 10 +++++----- scripts/kconfig/menu.c | 2 +- scripts/kconfig/nconf.c | 12 ++++++------ 6 files changed, 43 insertions(+), 34 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index d56131c0b3c..d6cfa0ffbaf 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -425,7 +425,7 @@ static void check_conf(struct menu *menu) (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) { if (input_mode == listnewconfig) { if (sym->name && !sym_is_choice_value(sym)) { - printf("CONFIG_%s\n", sym->name); + printf("%s%s\n", CONFIG_, sym->name); } } else if (input_mode != oldnoconfig) { if (!conf_cnt++) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index d9181de7892..9f3c8899da5 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -222,22 +222,22 @@ load: conf_lineno++; sym = NULL; if (line[0] == '#') { - if (memcmp(line + 2, "CONFIG_", 7)) + if (memcmp(line + 2, CONFIG_, strlen(CONFIG_))) continue; - p = strchr(line + 9, ' '); + p = strchr(line + 2 + strlen(CONFIG_), ' '); if (!p) continue; *p++ = 0; if (strncmp(p, "is not set", 10)) continue; if (def == S_DEF_USER) { - sym = sym_find(line + 9); + sym = sym_find(line + 2 + strlen(CONFIG_)); if (!sym) { sym_add_change_count(1); break; } } else { - sym = sym_lookup(line + 9, 0); + sym = sym_lookup(line + 2 + strlen(CONFIG_), 0); if (sym->type == S_UNKNOWN) sym->type = S_BOOLEAN; } @@ -253,8 +253,8 @@ load: default: ; } - } else if (memcmp(line, "CONFIG_", 7) == 0) { - p = strchr(line + 7, '='); + } else if (memcmp(line, CONFIG_, strlen(CONFIG_)) == 0) { + p = strchr(line + strlen(CONFIG_), '='); if (!p) continue; *p++ = 0; @@ -265,13 +265,13 @@ load: *p2 = 0; } if (def == S_DEF_USER) { - sym = sym_find(line + 7); + sym = sym_find(line + strlen(CONFIG_)); if (!sym) { sym_add_change_count(1); break; } } else { - sym = sym_lookup(line + 7, 0); + sym = sym_lookup(line + strlen(CONFIG_), 0); if (sym->type == S_UNKNOWN) sym->type = S_OTHER; } @@ -397,9 +397,9 @@ static void conf_write_string(bool headerfile, const char *name, { int l; if (headerfile) - fprintf(out, "#define CONFIG_%s \"", name); + fprintf(out, "#define %s%s \"", CONFIG_, name); else - fprintf(out, "CONFIG_%s=\"", name); + fprintf(out, "%s%s=\"", CONFIG_, name); while (1) { l = strcspn(str, "\"\\"); @@ -425,13 +425,14 @@ static void conf_write_symbol(struct symbol *sym, enum symbol_type type, switch (sym_get_tristate_value(sym)) { case no: if (write_no) - fprintf(out, "# CONFIG_%s is not set\n", sym->name); + fprintf(out, "# %s%s is not set\n", + CONFIG_, sym->name); break; case mod: - fprintf(out, "CONFIG_%s=m\n", sym->name); + fprintf(out, "%s%s=m\n", CONFIG_, sym->name); break; case yes: - fprintf(out, "CONFIG_%s=y\n", sym->name); + fprintf(out, "%s%s=y\n", CONFIG_, sym->name); break; } break; @@ -441,7 +442,7 @@ static void conf_write_symbol(struct symbol *sym, enum symbol_type type, case S_HEX: case S_INT: str = sym_get_string_value(sym); - fprintf(out, "CONFIG_%s=%s\n", sym->name, str); + fprintf(out, "%s%s=%s\n", CONFIG_, sym->name, str); break; case S_OTHER: case S_UNKNOWN: @@ -832,14 +833,17 @@ int conf_write_autoconf(void) case no: break; case mod: - fprintf(tristate, "CONFIG_%s=M\n", sym->name); - fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name); + fprintf(tristate, "%s%s=M\n", + CONFIG_, sym->name); + fprintf(out_h, "#define %s%s_MODULE 1\n", + CONFIG_, sym->name); break; case yes: if (sym->type == S_TRISTATE) - fprintf(tristate, "CONFIG_%s=Y\n", - sym->name); - fprintf(out_h, "#define CONFIG_%s 1\n", sym->name); + fprintf(tristate,"%s%s=Y\n", + CONFIG_, sym->name); + fprintf(out_h, "#define %s%s 1\n", + CONFIG_, sym->name); break; } break; @@ -849,12 +853,14 @@ int conf_write_autoconf(void) case S_HEX: str = sym_get_string_value(sym); if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) { - fprintf(out_h, "#define CONFIG_%s 0x%s\n", sym->name, str); + fprintf(out_h, "#define %s%s 0x%s\n", + CONFIG_, sym->name, str); break; } case S_INT: str = sym_get_string_value(sym); - fprintf(out_h, "#define CONFIG_%s %s\n", sym->name, str); + fprintf(out_h, "#define %s%s %s\n", + CONFIG_, sym->name, str); break; default: break; diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index bdf71bd3141..1b966bf02b1 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -37,6 +37,9 @@ extern "C" { #define _(text) gettext(text) #define N_(text) (text) +#ifndef CONFIG_ +#define CONFIG_ "CONFIG_" +#endif #define TF_COMMAND 0x0001 #define TF_PARAM 0x0002 diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 5c3d0c4b810..17ba2227932 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -316,8 +316,8 @@ static void search_conf(void) again: dialog_clear(); dres = dialog_inputbox(_("Search Configuration Parameter"), - _("Enter CONFIG_ (sub)string to search for " - "(with or without \"CONFIG\")"), + _("Enter " CONFIG_ " (sub)string to search for " + "(with or without \"" CONFIG_ "\")"), 10, 75, ""); switch (dres) { case 0: @@ -329,10 +329,10 @@ again: return; } - /* strip CONFIG_ if necessary */ + /* strip the prefix if necessary */ dialog_input = dialog_input_result; - if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0) - dialog_input += 7; + if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0) + dialog_input += strlen(CONFIG_); sym_arr = sym_re_search(dialog_input); res = get_relations_str(sym_arr); diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 4fb590247f3..64da30c7689 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -566,7 +566,7 @@ void menu_get_ext_help(struct menu *menu, struct gstr *help) if (menu_has_help(menu)) { if (sym->name) { - str_printf(help, "CONFIG_%s:\n\n", sym->name); + str_printf(help, "%s%s:\n\n", CONFIG_, sym->name); str_append(help, _(menu_get_help(menu))); str_append(help, "\n"); } diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index b8a9f37b036..da5e45d43f1 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -744,8 +744,8 @@ static void search_conf(void) again: dres = dialog_inputbox(main_window, _("Search Configuration Parameter"), - _("Enter CONFIG_ (sub)string to search for " - "(with or without \"CONFIG\")"), + _("Enter " CONFIG_ " (sub)string to search for " + "(with or without \"" CONFIG_ "\")"), "", dialog_input_result, 99); switch (dres) { case 0: @@ -758,10 +758,10 @@ again: return; } - /* strip CONFIG_ if necessary */ + /* strip the prefix if necessary */ dialog_input = dialog_input_result; - if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0) - dialog_input += 7; + if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0) + dialog_input += strlen(CONFIG_); sym_arr = sym_re_search(dialog_input); res = get_relations_str(sym_arr); @@ -1261,7 +1261,7 @@ static void show_help(struct menu *menu) if (menu && menu->sym && menu_has_help(menu)) { if (menu->sym->name) { - str_printf(&help, "CONFIG_%s:\n\n", menu->sym->name); + str_printf(&help, "%s%s:\n\n", CONFIG_, menu->sym->name); str_append(&help, _(menu_get_help(menu))); str_append(&help, "\n"); get_symbol_str(&help, menu->sym); -- cgit v1.2.3-70-g09d2 From 652cf9821d2a5b22a1725ce8dc235ea5de0e1c6f Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 14 Aug 2010 23:51:40 -0400 Subject: kconfig: rephrase help texts/comments not to include the package name Signed-off-by: Arnaud Lacombe Reviewed-by: Randy Dunlap Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/conf.c | 11 +++++------ scripts/kconfig/gconf.c | 3 +-- scripts/kconfig/mconf.c | 38 ++++++++++++++++++-------------------- scripts/kconfig/menu.c | 2 +- scripts/kconfig/nconf.c | 43 +++++++++++++++++++------------------------ scripts/kconfig/qconf.cc | 2 +- 6 files changed, 45 insertions(+), 54 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index d6cfa0ffbaf..eba5906dc4a 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -508,8 +508,7 @@ int main(int ac, char **av) name = conf_get_configname(); if (stat(name, &tmpstat)) { fprintf(stderr, _("***\n" - "*** You have not yet configured your kernel!\n" - "*** (missing kernel config file \"%s\")\n" + "*** Configuration file \"%s\" not found!\n" "***\n" "*** Please run some configurator (e.g. \"make oldconfig\" or\n" "*** \"make menuconfig\" or \"make xconfig\").\n" @@ -571,7 +570,7 @@ int main(int ac, char **av) name = getenv("KCONFIG_NOSILENTUPDATE"); if (name && *name) { fprintf(stderr, - _("\n*** Kernel configuration requires explicit update.\n\n")); + _("\n*** The configuration requires explicit update.\n\n")); return 1; } } @@ -623,11 +622,11 @@ int main(int ac, char **av) * All other commands are only used to generate a config. */ if (conf_get_changed() && conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); exit(1); } if (conf_write_autoconf()) { - fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n")); + fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); return 1; } } else if (input_mode == savedefconfig) { @@ -638,7 +637,7 @@ int main(int ac, char **av) } } else if (input_mode != listnewconfig) { if (conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); exit(1); } } diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c index d66988265f8..16362139d52 100644 --- a/scripts/kconfig/gconf.c +++ b/scripts/kconfig/gconf.c @@ -671,8 +671,7 @@ void on_introduction1_activate(GtkMenuItem * menuitem, gpointer user_data) { GtkWidget *dialog; const gchar *intro_text = _( - "Welcome to gkc, the GTK+ graphical kernel configuration tool\n" - "for Linux.\n" + "Welcome to gkc, the GTK+ graphical configuration tool\n" "For each option, a blank box indicates the feature is disabled, a\n" "check indicates it is enabled, and a dot indicates that it is to\n" "be compiled as a module. Clicking on the box will cycle through the three states.\n" diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 17ba2227932..cee4281ad20 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -25,11 +25,9 @@ static const char mconf_readme[] = N_( "Overview\n" "--------\n" -"Some kernel features may be built directly into the kernel.\n" -"Some may be made into loadable runtime modules. Some features\n" -"may be completely removed altogether. There are also certain\n" -"kernel parameters which are not really features, but must be\n" -"entered in as decimal or hexadecimal numbers or possibly text.\n" +"This interface let you select features and parameters for the build.\n" +"Features can either be built-in, modularized, or ignored. Parameters\n" +"must be entered in as decimal or hexadecimal numbers or text.\n" "\n" "Menu items beginning with following braces represent features that\n" " [ ] can be built in or removed\n" @@ -117,7 +115,7 @@ static const char mconf_readme[] = N_( "-----------------------------\n" "Menuconfig supports the use of alternate configuration files for\n" "those who, for various reasons, find it necessary to switch\n" -"between different kernel configurations.\n" +"between different configurations.\n" "\n" "At the end of the main menu you will find two options. One is\n" "for saving the current configuration to a file of your choosing.\n" @@ -150,9 +148,9 @@ static const char mconf_readme[] = N_( "\n" "Optional personality available\n" "------------------------------\n" -"If you prefer to have all of the kernel options listed in a single\n" -"menu, rather than the default multimenu hierarchy, run the menuconfig\n" -"with MENUCONFIG_MODE environment variable set to single_menu. Example:\n" +"If you prefer to have all of the options listed in a single menu, rather\n" +"than the default multimenu hierarchy, run the menuconfig with\n" +"MENUCONFIG_MODE environment variable set to single_menu. Example:\n" "\n" "make MENUCONFIG_MODE=single_menu menuconfig\n" "\n" @@ -207,12 +205,12 @@ load_config_text[] = N_( "last retrieved. Leave blank to abort."), load_config_help[] = N_( "\n" - "For various reasons, one may wish to keep several different kernel\n" + "For various reasons, one may wish to keep several different\n" "configurations available on a single machine.\n" "\n" "If you have saved a previous configuration in a file other than the\n" - "kernel's default, entering the name of the file here will allow you\n" - "to modify that configuration.\n" + "default one, entering its name here will allow you to modify that\n" + "configuration.\n" "\n" "If you are uncertain, then you have probably never used alternate\n" "configuration files. You should therefore leave this blank to abort.\n"), @@ -221,8 +219,8 @@ save_config_text[] = N_( "as an alternate. Leave blank to abort."), save_config_help[] = N_( "\n" - "For various reasons, one may wish to keep different kernel\n" - "configurations available on a single machine.\n" + "For various reasons, one may wish to keep different configurations\n" + "available on a single machine.\n" "\n" "Entering a file name here will allow you to later retrieve, modify\n" "and use the current configuration as an alternate to whatever\n" @@ -834,7 +832,7 @@ int main(int ac, char **av) if (conf_get_changed()) res = dialog_yesno(NULL, _("Do you wish to save your " - "new kernel configuration?\n" + "new configuration?\n" " to continue."), 6, 60); else @@ -846,20 +844,20 @@ int main(int ac, char **av) case 0: if (conf_write(filename)) { fprintf(stderr, _("\n\n" - "Error during writing of the kernel configuration.\n" - "Your kernel configuration changes were NOT saved." + "Error while writing of the configuration.\n" + "Your configuration changes were NOT saved." "\n\n")); return 1; } case -1: printf(_("\n\n" - "*** End of Linux kernel configuration.\n" - "*** Execute 'make' to build the kernel or try 'make help'." + "*** End of the configuration.\n" + "*** Execute 'make' to start the build or try 'make help'." "\n\n")); break; default: fprintf(stderr, _("\n\n" - "Your kernel configuration changes were NOT saved." + "Your configuration changes were NOT saved." "\n\n")); } diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 64da30c7689..682045a7aae 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -10,7 +10,7 @@ #include "lkc.h" static const char nohelp_text[] = N_( - "There is no help available for this kernel option.\n"); + "There is no help available for this option.\n"); struct menu rootmenu; static struct menu **last_entry_ptr; diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index da5e45d43f1..801cc048704 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -15,11 +15,9 @@ static const char nconf_readme[] = N_( "Overview\n" "--------\n" -"Some kernel features may be built directly into the kernel.\n" -"Some may be made into loadable runtime modules. Some features\n" -"may be completely removed altogether. There are also certain\n" -"kernel parameters which are not really features, but must be\n" -"entered in as decimal or hexadecimal numbers or possibly text.\n" +"This interface let you select features and parameters for the build.\n" +"Features can either be built-in, modularized, or ignored. Parameters\n" +"must be entered in as decimal or hexadecimal numbers or text.\n" "\n" "Menu items beginning with following braces represent features that\n" " [ ] can be built in or removed\n" @@ -95,7 +93,7 @@ static const char nconf_readme[] = N_( "-----------------------------\n" "nconfig supports the use of alternate configuration files for\n" "those who, for various reasons, find it necessary to switch\n" -"between different kernel configurations.\n" +"between different configurations.\n" "\n" "At the end of the main menu you will find two options. One is\n" "for saving the current configuration to a file of your choosing.\n" @@ -128,9 +126,9 @@ static const char nconf_readme[] = N_( "\n" "Optional personality available\n" "------------------------------\n" -"If you prefer to have all of the kernel options listed in a single\n" -"menu, rather than the default multimenu hierarchy, run the nconfig\n" -"with NCONFIG_MODE environment variable set to single_menu. Example:\n" +"If you prefer to have all of the options listed in a single menu, rather\n" +"than the default multimenu hierarchy, run the nconfig with NCONFIG_MODE\n" +"environment variable set to single_menu. Example:\n" "\n" "make NCONFIG_MODE=single_menu nconfig\n" "\n" @@ -185,19 +183,19 @@ setmod_text[] = N_( "has been configured as a module.\n" "As a result, this feature will be built as a module."), nohelp_text[] = N_( -"There is no help available for this kernel option.\n"), +"There is no help available for this option.\n"), load_config_text[] = N_( "Enter the name of the configuration file you wish to load.\n" "Accept the name shown to restore the configuration you\n" "last retrieved. Leave blank to abort."), load_config_help[] = N_( "\n" -"For various reasons, one may wish to keep several different kernel\n" +"For various reasons, one may wish to keep several different\n" "configurations available on a single machine.\n" "\n" "If you have saved a previous configuration in a file other than the\n" -"kernel's default, entering the name of the file here will allow you\n" -"to modify that configuration.\n" +"default one, entering its name here will allow you to modify that\n" +"configuration.\n" "\n" "If you are uncertain, then you have probably never used alternate\n" "configuration files. You should therefor leave this blank to abort.\n"), @@ -206,8 +204,8 @@ save_config_text[] = N_( "as an alternate. Leave blank to abort."), save_config_help[] = N_( "\n" -"For various reasons, one may wish to keep different kernel\n" -"configurations available on a single machine.\n" +"For various reasons, one may wish to keep different configurations\n" +"available on a single machine.\n" "\n" "Entering a file name here will allow you to later retrieve, modify\n" "and use the current configuration as an alternate to whatever\n" @@ -681,8 +679,7 @@ static int do_exit(void) return 0; } res = btn_dialog(main_window, - _("Do you wish to save your " - "new kernel configuration?\n" + _("Do you wish to save your new configuration?\n" " to cancel and resume nconfig."), 2, " ", @@ -701,18 +698,16 @@ static int do_exit(void) if (res) btn_dialog( main_window, - _("Error during writing of the kernel " - "configuration.\n" - "Your kernel configuration " - "changes were NOT saved."), + _("Error during writing of configuration.\n" + "Your configuration changes were NOT saved."), 1, ""); else { char buf[1024]; snprintf(buf, 1024, _("Configuration written to %s\n" - "End of Linux kernel configuration.\n" - "Execute 'make' to build the kernel or try" + "End of the configuration.\n" + "Execute 'make' to start the build or try" " 'make help'."), filename); btn_dialog( main_window, @@ -724,7 +719,7 @@ static int do_exit(void) default: btn_dialog( main_window, - _("Your kernel configuration changes were NOT saved."), + _("Your configuration changes were NOT saved."), 1, ""); break; diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index a04e4517ead..fe18f7efdca 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1655,7 +1655,7 @@ void ConfigMainWindow::closeEvent(QCloseEvent* e) void ConfigMainWindow::showIntro(void) { - static const QString str = _("Welcome to the qconf graphical kernel configuration tool for Linux.\n\n" + static const QString str = _("Welcome to the qconf graphical configuration tool.\n\n" "For each option, a blank box indicates the feature is disabled, a check\n" "indicates it is enabled, and a dot indicates that it is to be compiled\n" "as a module. Clicking on the box will cycle through the three states.\n\n" -- cgit v1.2.3-70-g09d2 From ef211607ed49c475735898514c60a9797208b699 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 21 Aug 2010 01:20:52 -0400 Subject: kconfig: allow PACKAGE to be defined on the compiler's command-line Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/lkc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 1b966bf02b1..5d5f1872d65 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -31,7 +31,10 @@ extern "C" { #define SRCTREE "srctree" +#ifndef PACKAGE #define PACKAGE "linux" +#endif + #define LOCALEDIR "/usr/share/locale" #define _(text) gettext(text) -- cgit v1.2.3-70-g09d2 From 8ea13e2c87c83b7cb0b360cb8779415967727647 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Mon, 16 Aug 2010 22:55:31 -0400 Subject: kconfig: implement the `mainmenu' directive If specified, the directive must be placed at the top of the Kconfig file. We need to change the grammar to make the mainmenu directive set the `rootmenu' prompt. This reflect how menu_add_prompt() works internally, ie. set the prompt of the `current_entry', pointing originally to `rootmenu'. Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- Documentation/kbuild/kconfig-language.txt | 3 ++- scripts/kconfig/zconf.y | 14 +++++++++++--- 2 files changed, 13 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index b472e4e0ba6..2fe93ca7c77 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -322,7 +322,8 @@ mainmenu: "mainmenu" This sets the config program's title bar if the config program chooses -to use it. +to use it. It should be placed at the top of the configuration, before any +other statement. Kconfig hints diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 23dfd3baa7a..e9b14efd741 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -36,7 +36,7 @@ static struct menu *current_menu, *current_entry; #define YYERROR_VERBOSE #endif %} -%expect 26 +%expect 28 %union { @@ -104,14 +104,15 @@ static struct menu *current_menu, *current_entry; %} %% -input: stmt_list; +input: nl start | start; + +start: mainmenu_stmt stmt_list | stmt_list; stmt_list: /* empty */ | stmt_list common_stmt | stmt_list choice_stmt | stmt_list menu_stmt - | stmt_list T_MAINMENU prompt nl | stmt_list end { zconf_error("unexpected end statement"); } | stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); } | stmt_list option_name error T_EOL @@ -342,6 +343,13 @@ if_block: | if_block choice_stmt ; +/* mainmenu entry */ + +mainmenu_stmt: T_MAINMENU prompt nl +{ + menu_add_prompt(P_MENU, $2, NULL); +}; + /* menu entry */ menu: T_MENU prompt T_EOL -- cgit v1.2.3-70-g09d2 From c0920a1cbd7aecefa5f9768e82136935132ef1cf Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Fri, 10 Sep 2010 21:23:28 -0400 Subject: kconfig: regen parser Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/lex.zconf.c_shipped | 7 +- scripts/kconfig/zconf.tab.c_shipped | 547 +++++++++++++++++++----------------- 2 files changed, 287 insertions(+), 267 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped index fdc7113b08d..6eb03971825 100644 --- a/scripts/kconfig/lex.zconf.c_shipped +++ b/scripts/kconfig/lex.zconf.c_shipped @@ -2373,9 +2373,10 @@ void zconf_nextfile(const char *name) memset(buf, 0, sizeof(*buf)); current_buf->state = YY_CURRENT_BUFFER; - zconfin = zconf_fopen(name); + zconfin = zconf_fopen(file->name); if (!zconfin) { - printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name); + printf("%s:%d: can't open file \"%s\"\n", + zconf_curname(), zconf_lineno(), file->name); exit(1); } zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE)); @@ -2422,7 +2423,7 @@ int zconf_lineno(void) return current_pos.lineno; } -char *zconf_curname(void) +const char *zconf_curname(void) { return current_pos.file ? current_pos.file->name : ""; } diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index 32a9eefd842..699d4b26518 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -417,18 +417,18 @@ union yyalloc #endif /* YYFINAL -- State number of the termination state. */ -#define YYFINAL 3 +#define YYFINAL 11 /* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 259 +#define YYLAST 277 /* YYNTOKENS -- Number of terminals. */ #define YYNTOKENS 35 /* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 46 +#define YYNNTS 48 /* YYNRULES -- Number of rules. */ -#define YYNRULES 110 +#define YYNRULES 113 /* YYNRULES -- Number of states. */ -#define YYNSTATES 180 +#define YYNSTATES 185 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ #define YYUNDEFTOK 2 @@ -476,73 +476,74 @@ static const yytype_uint8 yytranslate[] = YYRHS. */ static const yytype_uint16 yyprhs[] = { - 0, 0, 3, 5, 6, 9, 12, 15, 20, 23, - 28, 33, 37, 39, 41, 43, 45, 47, 49, 51, - 53, 55, 57, 59, 61, 63, 67, 70, 74, 77, - 81, 84, 85, 88, 91, 94, 97, 100, 103, 107, - 112, 117, 122, 128, 132, 133, 137, 138, 141, 145, - 148, 150, 154, 155, 158, 161, 164, 167, 170, 175, - 179, 182, 187, 188, 191, 195, 197, 201, 202, 205, - 208, 211, 215, 218, 220, 224, 225, 228, 231, 234, - 238, 242, 245, 248, 251, 252, 255, 258, 261, 266, - 267, 270, 272, 274, 277, 280, 283, 285, 288, 289, - 292, 294, 298, 302, 306, 309, 313, 317, 319, 321, - 322 + 0, 0, 3, 6, 8, 11, 13, 14, 17, 20, + 23, 26, 31, 36, 40, 42, 44, 46, 48, 50, + 52, 54, 56, 58, 60, 62, 64, 66, 70, 73, + 77, 80, 84, 87, 88, 91, 94, 97, 100, 103, + 106, 110, 115, 120, 125, 131, 135, 136, 140, 141, + 144, 148, 151, 153, 157, 158, 161, 164, 167, 170, + 173, 178, 182, 185, 190, 191, 194, 198, 200, 204, + 205, 208, 211, 214, 218, 222, 225, 227, 231, 232, + 235, 238, 241, 245, 249, 252, 255, 258, 259, 262, + 265, 268, 273, 274, 277, 279, 281, 284, 287, 290, + 292, 295, 296, 299, 301, 305, 309, 313, 316, 320, + 324, 326, 328, 329 }; /* YYRHS -- A `-1'-separated list of the rules' RHS. */ static const yytype_int8 yyrhs[] = { - 36, 0, -1, 37, -1, -1, 37, 39, -1, 37, - 53, -1, 37, 64, -1, 37, 3, 74, 76, -1, - 37, 75, -1, 37, 25, 1, 30, -1, 37, 38, - 1, 30, -1, 37, 1, 30, -1, 16, -1, 18, - -1, 19, -1, 21, -1, 17, -1, 22, -1, 20, - -1, 30, -1, 59, -1, 68, -1, 42, -1, 44, - -1, 66, -1, 25, 1, 30, -1, 1, 30, -1, - 10, 25, 30, -1, 41, 45, -1, 11, 25, 30, - -1, 43, 45, -1, -1, 45, 46, -1, 45, 47, - -1, 45, 72, -1, 45, 70, -1, 45, 40, -1, - 45, 30, -1, 19, 73, 30, -1, 18, 74, 77, - 30, -1, 20, 78, 77, 30, -1, 21, 25, 77, - 30, -1, 22, 79, 79, 77, 30, -1, 23, 48, - 30, -1, -1, 48, 25, 49, -1, -1, 33, 74, - -1, 7, 80, 30, -1, 50, 54, -1, 75, -1, - 51, 56, 52, -1, -1, 54, 55, -1, 54, 72, - -1, 54, 70, -1, 54, 30, -1, 54, 40, -1, - 18, 74, 77, 30, -1, 19, 73, 30, -1, 17, - 30, -1, 20, 25, 77, 30, -1, -1, 56, 39, - -1, 14, 78, 76, -1, 75, -1, 57, 60, 58, - -1, -1, 60, 39, -1, 60, 64, -1, 60, 53, - -1, 4, 74, 30, -1, 61, 71, -1, 75, -1, - 62, 65, 63, -1, -1, 65, 39, -1, 65, 64, - -1, 65, 53, -1, 6, 74, 30, -1, 9, 74, - 30, -1, 67, 71, -1, 12, 30, -1, 69, 13, - -1, -1, 71, 72, -1, 71, 30, -1, 71, 40, - -1, 16, 24, 78, 30, -1, -1, 74, 77, -1, - 25, -1, 26, -1, 5, 30, -1, 8, 30, -1, - 15, 30, -1, 30, -1, 76, 30, -1, -1, 14, - 78, -1, 79, -1, 79, 33, 79, -1, 79, 27, - 79, -1, 29, 78, 28, -1, 34, 78, -1, 78, - 31, 78, -1, 78, 32, 78, -1, 25, -1, 26, - -1, -1, 25, -1 + 36, 0, -1, 78, 37, -1, 37, -1, 62, 38, + -1, 38, -1, -1, 38, 40, -1, 38, 54, -1, + 38, 66, -1, 38, 77, -1, 38, 25, 1, 30, + -1, 38, 39, 1, 30, -1, 38, 1, 30, -1, + 16, -1, 18, -1, 19, -1, 21, -1, 17, -1, + 22, -1, 20, -1, 30, -1, 60, -1, 70, -1, + 43, -1, 45, -1, 68, -1, 25, 1, 30, -1, + 1, 30, -1, 10, 25, 30, -1, 42, 46, -1, + 11, 25, 30, -1, 44, 46, -1, -1, 46, 47, + -1, 46, 48, -1, 46, 74, -1, 46, 72, -1, + 46, 41, -1, 46, 30, -1, 19, 75, 30, -1, + 18, 76, 79, 30, -1, 20, 80, 79, 30, -1, + 21, 25, 79, 30, -1, 22, 81, 81, 79, 30, + -1, 23, 49, 30, -1, -1, 49, 25, 50, -1, + -1, 33, 76, -1, 7, 82, 30, -1, 51, 55, + -1, 77, -1, 52, 57, 53, -1, -1, 55, 56, + -1, 55, 74, -1, 55, 72, -1, 55, 30, -1, + 55, 41, -1, 18, 76, 79, 30, -1, 19, 75, + 30, -1, 17, 30, -1, 20, 25, 79, 30, -1, + -1, 57, 40, -1, 14, 80, 78, -1, 77, -1, + 58, 61, 59, -1, -1, 61, 40, -1, 61, 66, + -1, 61, 54, -1, 3, 76, 78, -1, 4, 76, + 30, -1, 63, 73, -1, 77, -1, 64, 67, 65, + -1, -1, 67, 40, -1, 67, 66, -1, 67, 54, + -1, 6, 76, 30, -1, 9, 76, 30, -1, 69, + 73, -1, 12, 30, -1, 71, 13, -1, -1, 73, + 74, -1, 73, 30, -1, 73, 41, -1, 16, 24, + 80, 30, -1, -1, 76, 79, -1, 25, -1, 26, + -1, 5, 30, -1, 8, 30, -1, 15, 30, -1, + 30, -1, 78, 30, -1, -1, 14, 80, -1, 81, + -1, 81, 33, 81, -1, 81, 27, 81, -1, 29, + 80, 28, -1, 34, 80, -1, 80, 31, 80, -1, + 80, 32, 80, -1, 25, -1, 26, -1, -1, 25, + -1 }; /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 107, 107, 109, 111, 112, 113, 114, 115, 116, - 117, 121, 125, 125, 125, 125, 125, 125, 125, 129, - 130, 131, 132, 133, 134, 138, 139, 145, 153, 159, - 167, 177, 179, 180, 181, 182, 183, 184, 187, 195, - 201, 211, 217, 223, 226, 228, 239, 240, 245, 254, - 259, 267, 270, 272, 273, 274, 275, 276, 279, 285, - 296, 302, 312, 314, 319, 327, 335, 338, 340, 341, - 342, 347, 354, 359, 367, 370, 372, 373, 374, 377, - 385, 392, 399, 405, 412, 414, 415, 416, 419, 427, - 429, 434, 435, 438, 439, 440, 444, 445, 448, 449, - 452, 453, 454, 455, 456, 457, 458, 461, 462, 465, - 466 + 0, 107, 107, 107, 109, 109, 111, 113, 114, 115, + 116, 117, 118, 122, 126, 126, 126, 126, 126, 126, + 126, 130, 131, 132, 133, 134, 135, 139, 140, 146, + 154, 160, 168, 178, 180, 181, 182, 183, 184, 185, + 188, 196, 202, 212, 218, 224, 227, 229, 240, 241, + 246, 255, 260, 268, 271, 273, 274, 275, 276, 277, + 280, 286, 297, 303, 313, 315, 320, 328, 336, 339, + 341, 342, 343, 348, 355, 362, 367, 375, 378, 380, + 381, 382, 385, 393, 400, 407, 413, 420, 422, 423, + 424, 427, 435, 437, 442, 443, 446, 447, 448, 452, + 453, 456, 457, 460, 461, 462, 463, 464, 465, 466, + 469, 470, 473, 474 }; #endif @@ -557,17 +558,17 @@ static const char *const yytname[] = "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL", - "T_NOT", "$accept", "input", "stmt_list", "option_name", "common_stmt", - "option_error", "config_entry_start", "config_stmt", + "T_NOT", "$accept", "input", "start", "stmt_list", "option_name", + "common_stmt", "option_error", "config_entry_start", "config_stmt", "menuconfig_entry_start", "menuconfig_stmt", "config_option_list", "config_option", "symbol_option", "symbol_option_list", "symbol_option_arg", "choice", "choice_entry", "choice_end", "choice_stmt", "choice_option_list", "choice_option", "choice_block", - "if_entry", "if_end", "if_stmt", "if_block", "menu", "menu_entry", - "menu_end", "menu_stmt", "menu_block", "source_stmt", "comment", - "comment_stmt", "help_start", "help", "depends_list", "depends", - "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr", "symbol", - "word_opt", 0 + "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu", + "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt", + "comment", "comment_stmt", "help_start", "help", "depends_list", + "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr", + "symbol", "word_opt", 0 }; #endif @@ -586,35 +587,35 @@ static const yytype_uint16 yytoknum[] = /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ static const yytype_uint8 yyr1[] = { - 0, 35, 36, 37, 37, 37, 37, 37, 37, 37, - 37, 37, 38, 38, 38, 38, 38, 38, 38, 39, - 39, 39, 39, 39, 39, 40, 40, 41, 42, 43, - 44, 45, 45, 45, 45, 45, 45, 45, 46, 46, - 46, 46, 46, 47, 48, 48, 49, 49, 50, 51, - 52, 53, 54, 54, 54, 54, 54, 54, 55, 55, - 55, 55, 56, 56, 57, 58, 59, 60, 60, 60, - 60, 61, 62, 63, 64, 65, 65, 65, 65, 66, - 67, 68, 69, 70, 71, 71, 71, 71, 72, 73, - 73, 74, 74, 75, 75, 75, 76, 76, 77, 77, - 78, 78, 78, 78, 78, 78, 78, 79, 79, 80, - 80 + 0, 35, 36, 36, 37, 37, 38, 38, 38, 38, + 38, 38, 38, 38, 39, 39, 39, 39, 39, 39, + 39, 40, 40, 40, 40, 40, 40, 41, 41, 42, + 43, 44, 45, 46, 46, 46, 46, 46, 46, 46, + 47, 47, 47, 47, 47, 48, 49, 49, 50, 50, + 51, 52, 53, 54, 55, 55, 55, 55, 55, 55, + 56, 56, 56, 56, 57, 57, 58, 59, 60, 61, + 61, 61, 61, 62, 63, 64, 65, 66, 67, 67, + 67, 67, 68, 69, 70, 71, 72, 73, 73, 73, + 73, 74, 75, 75, 76, 76, 77, 77, 77, 78, + 78, 79, 79, 80, 80, 80, 80, 80, 80, 80, + 81, 81, 82, 82 }; /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ static const yytype_uint8 yyr2[] = { - 0, 2, 1, 0, 2, 2, 2, 4, 2, 4, - 4, 3, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 3, 2, 3, 2, 3, - 2, 0, 2, 2, 2, 2, 2, 2, 3, 4, - 4, 4, 5, 3, 0, 3, 0, 2, 3, 2, - 1, 3, 0, 2, 2, 2, 2, 2, 4, 3, - 2, 4, 0, 2, 3, 1, 3, 0, 2, 2, - 2, 3, 2, 1, 3, 0, 2, 2, 2, 3, - 3, 2, 2, 2, 0, 2, 2, 2, 4, 0, - 2, 1, 1, 2, 2, 2, 1, 2, 0, 2, - 1, 3, 3, 3, 2, 3, 3, 1, 1, 0, - 1 + 0, 2, 2, 1, 2, 1, 0, 2, 2, 2, + 2, 4, 4, 3, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 3, 2, 3, + 2, 3, 2, 0, 2, 2, 2, 2, 2, 2, + 3, 4, 4, 4, 5, 3, 0, 3, 0, 2, + 3, 2, 1, 3, 0, 2, 2, 2, 2, 2, + 4, 3, 2, 4, 0, 2, 3, 1, 3, 0, + 2, 2, 2, 3, 3, 2, 1, 3, 0, 2, + 2, 2, 3, 3, 2, 2, 2, 0, 2, 2, + 2, 4, 0, 2, 1, 1, 2, 2, 2, 1, + 2, 0, 2, 1, 3, 3, 3, 2, 3, 3, + 1, 1, 0, 1 }; /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state @@ -622,158 +623,165 @@ static const yytype_uint8 yyr2[] = means the default is an error. */ static const yytype_uint8 yydefact[] = { - 3, 0, 0, 1, 0, 0, 0, 0, 0, 109, - 0, 0, 0, 0, 0, 0, 12, 16, 13, 14, - 18, 15, 17, 0, 19, 0, 4, 31, 22, 31, - 23, 52, 62, 5, 67, 20, 84, 75, 6, 24, - 84, 21, 8, 11, 91, 92, 0, 0, 93, 0, - 110, 0, 94, 0, 0, 0, 107, 108, 0, 0, - 0, 100, 95, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 96, 7, 71, 79, 48, 80, 27, - 29, 0, 104, 0, 0, 64, 0, 0, 9, 10, - 0, 0, 0, 0, 89, 0, 0, 0, 44, 0, - 37, 36, 32, 33, 0, 35, 34, 0, 0, 89, - 0, 56, 57, 53, 55, 54, 63, 51, 50, 68, - 70, 66, 69, 65, 86, 87, 85, 76, 78, 74, - 77, 73, 97, 103, 105, 106, 102, 101, 26, 82, - 0, 98, 0, 98, 98, 98, 0, 0, 0, 83, - 60, 98, 0, 98, 0, 0, 0, 38, 90, 0, - 0, 98, 46, 43, 25, 0, 59, 0, 88, 99, - 39, 40, 41, 0, 0, 45, 58, 61, 42, 47 + 6, 0, 99, 0, 3, 0, 6, 6, 94, 95, + 0, 1, 0, 0, 0, 0, 112, 0, 0, 0, + 0, 0, 0, 14, 18, 15, 16, 20, 17, 19, + 0, 21, 0, 7, 33, 24, 33, 25, 54, 64, + 8, 69, 22, 87, 78, 9, 26, 87, 23, 10, + 0, 100, 2, 73, 13, 0, 96, 0, 113, 0, + 97, 0, 0, 0, 110, 111, 0, 0, 0, 103, + 98, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 74, 82, 50, 83, 29, 31, 0, 107, 0, + 0, 66, 0, 0, 11, 12, 0, 0, 0, 0, + 92, 0, 0, 0, 46, 0, 39, 38, 34, 35, + 0, 37, 36, 0, 0, 92, 0, 58, 59, 55, + 57, 56, 65, 53, 52, 70, 72, 68, 71, 67, + 89, 90, 88, 79, 81, 77, 80, 76, 106, 108, + 109, 105, 104, 28, 85, 0, 101, 0, 101, 101, + 101, 0, 0, 0, 86, 62, 101, 0, 101, 0, + 0, 0, 40, 93, 0, 0, 101, 48, 45, 27, + 0, 61, 0, 91, 102, 41, 42, 43, 0, 0, + 47, 60, 63, 44, 49 }; /* YYDEFGOTO[NTERM-NUM]. */ static const yytype_int16 yydefgoto[] = { - -1, 1, 2, 25, 26, 101, 27, 28, 29, 30, - 65, 102, 103, 147, 175, 31, 32, 117, 33, 67, - 113, 68, 34, 121, 35, 69, 36, 37, 129, 38, - 71, 39, 40, 41, 104, 105, 70, 106, 142, 143, - 42, 74, 156, 60, 61, 51 + -1, 3, 4, 5, 32, 33, 107, 34, 35, 36, + 37, 73, 108, 109, 152, 180, 38, 39, 123, 40, + 75, 119, 76, 41, 127, 42, 77, 6, 43, 44, + 135, 45, 79, 46, 47, 48, 110, 111, 78, 112, + 147, 148, 49, 7, 161, 68, 69, 59 }; /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing STATE-NUM. */ -#define YYPACT_NINF -80 +#define YYPACT_NINF -89 static const yytype_int16 yypact[] = { - -80, 2, 132, -80, -13, -1, -1, -2, -1, 9, - 33, -1, 27, 40, -3, 38, -80, -80, -80, -80, - -80, -80, -80, 71, -80, 77, -80, -80, -80, -80, - -80, -80, -80, -80, -80, -80, -80, -80, -80, -80, - -80, -80, -80, -80, -80, -80, 57, 61, -80, 63, - -80, 76, -80, 87, 101, 133, -80, -80, -3, -3, - 195, -6, -80, 136, 149, 39, 104, 65, 150, 5, - 194, 5, 167, -80, 176, -80, -80, -80, -80, -80, - -80, 68, -80, -3, -3, 176, 72, 72, -80, -80, - 177, 187, 78, -1, -1, -3, 196, 72, -80, 222, - -80, -80, -80, -80, 221, -80, -80, 205, -1, -1, - 211, -80, -80, -80, -80, -80, -80, -80, -80, -80, - -80, -80, -80, -80, -80, -80, -80, -80, -80, -80, - -80, -80, -80, -80, 206, -80, -80, -80, -80, -80, - -3, 223, 209, 223, 197, 223, 72, 7, 210, -80, - -80, 223, 212, 223, 201, -3, 213, -80, -80, 214, - 215, 223, 208, -80, -80, 216, -80, 217, -80, 113, - -80, -80, -80, 218, -1, -80, -80, -80, -80, -80 + 3, 4, -89, 20, -89, 100, -89, 7, -89, -89, + -8, -89, 17, 4, 28, 4, 37, 36, 4, 68, + 87, -18, 69, -89, -89, -89, -89, -89, -89, -89, + 128, -89, 138, -89, -89, -89, -89, -89, -89, -89, + -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, + 127, -89, -89, 110, -89, 126, -89, 136, -89, 137, + -89, 147, 150, 152, -89, -89, -18, -18, 171, -14, + -89, 153, 157, 34, 67, 180, 233, 220, 207, 220, + 154, -89, -89, -89, -89, -89, -89, 0, -89, -18, + -18, 110, 44, 44, -89, -89, 163, 174, 182, 4, + 4, -18, 194, 44, -89, 219, -89, -89, -89, -89, + 223, -89, -89, 203, 4, 4, 215, -89, -89, -89, + -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, + -89, -89, -89, -89, -89, -89, -89, -89, -89, 213, + -89, -89, -89, -89, -89, -18, 232, 227, 232, -5, + 232, 44, 35, 234, -89, -89, 232, 235, 232, 224, + -18, 236, -89, -89, 237, 238, 232, 216, -89, -89, + 240, -89, 241, -89, 71, -89, -89, -89, 242, 4, + -89, -89, -89, -89, -89 }; /* YYPGOTO[NTERM-NUM]. */ static const yytype_int16 yypgoto[] = { - -80, -80, -80, -80, 122, -34, -80, -80, -80, -80, - 220, -80, -80, -80, -80, -80, -80, -80, 59, -80, - -80, -80, -80, -80, -80, -80, -80, -80, -80, 125, - -80, -80, -80, -80, -80, 183, 219, 22, 142, -5, - 147, 192, 69, -54, -79, -80 + -89, -89, 255, 267, -89, 47, -57, -89, -89, -89, + -89, 239, -89, -89, -89, -89, -89, -89, -89, 130, + -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, + -89, 181, -89, -89, -89, -89, -89, 199, 229, 16, + 162, -1, 74, -7, 103, -65, -88, -89 }; /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If positive, shift that token. If negative, reduce the rule which number is the opposite. If zero, do what YYDEFACT says. If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -82 +#define YYTABLE_NINF -85 static const yytype_int16 yytable[] = { - 46, 47, 3, 49, 81, 82, 53, 136, 137, 6, - 7, 8, 9, 10, 11, 12, 13, 43, 146, 14, - 15, 86, 56, 57, 44, 45, 58, 87, 48, 134, - 135, 59, 162, 112, 50, 24, 125, 163, 125, -28, - 90, 144, -28, -28, -28, -28, -28, -28, -28, -28, - -28, 91, 54, -28, -28, 92, -28, 93, 94, 95, - 96, 97, 98, 52, 99, 55, 90, 161, 62, 100, - -49, -49, 63, -49, -49, -49, -49, 91, 64, -49, - -49, 92, 107, 108, 109, 110, 154, 73, 141, 115, - 99, 75, 126, 76, 126, 111, 133, 56, 57, 83, - 84, 169, 140, 151, -30, 90, 77, -30, -30, -30, - -30, -30, -30, -30, -30, -30, 91, 78, -30, -30, - 92, -30, 93, 94, 95, 96, 97, 98, 120, 99, - 128, 79, -2, 4, 100, 5, 6, 7, 8, 9, - 10, 11, 12, 13, 83, 84, 14, 15, 16, 17, - 18, 19, 20, 21, 22, 7, 8, 23, 10, 11, - 12, 13, 24, 80, 14, 15, 88, -81, 90, 179, - -81, -81, -81, -81, -81, -81, -81, -81, -81, 89, - 24, -81, -81, 92, -81, -81, -81, -81, -81, -81, - 116, 119, 99, 127, 122, 90, 130, 124, -72, -72, - -72, -72, -72, -72, -72, -72, 132, 138, -72, -72, - 92, 155, 158, 159, 160, 118, 123, 139, 131, 99, - 165, 145, 167, 148, 124, 73, 83, 84, 83, 84, - 173, 168, 83, 84, 149, 150, 153, 155, 84, 157, - 164, 174, 166, 170, 171, 172, 176, 177, 178, 66, - 114, 152, 85, 0, 0, 0, 0, 0, 0, 72 + 10, 87, 88, 53, 141, 142, 1, 64, 65, 160, + 1, 66, 55, 92, 57, 151, 67, 61, 118, 93, + 11, 131, 2, 131, 139, 140, 89, 90, 138, 8, + 9, 89, 90, 2, -30, 96, 149, 51, -30, -30, + -30, -30, -30, -30, -30, -30, 97, 54, -30, -30, + 98, -30, 99, 100, 101, 102, 103, 104, 56, 105, + 167, 91, 58, 166, 106, 168, 60, -32, 96, 64, + 65, -32, -32, -32, -32, -32, -32, -32, -32, 97, + 159, -32, -32, 98, -32, 99, 100, 101, 102, 103, + 104, 121, 105, 62, 132, 174, 132, 106, 146, 70, + -5, 12, 89, 90, 13, 14, 15, 16, 17, 18, + 19, 20, 63, 156, 21, 22, 23, 24, 25, 26, + 27, 28, 29, 122, 125, 30, 133, -4, 12, 71, + 31, 13, 14, 15, 16, 17, 18, 19, 20, 72, + 51, 21, 22, 23, 24, 25, 26, 27, 28, 29, + 124, 129, 30, 137, -84, 96, 81, 31, -84, -84, + -84, -84, -84, -84, -84, -84, 82, 83, -84, -84, + 98, -84, -84, -84, -84, -84, -84, 84, 184, 105, + 85, 96, 86, 94, 130, -51, -51, 95, -51, -51, + -51, -51, 97, 143, -51, -51, 98, 113, 114, 115, + 116, 2, 89, 90, 144, 105, 145, 126, 96, 134, + 117, -75, -75, -75, -75, -75, -75, -75, -75, 150, + 153, -75, -75, 98, 13, 14, 15, 16, 17, 18, + 19, 20, 105, 155, 21, 22, 154, 130, 14, 15, + 158, 17, 18, 19, 20, 90, 160, 21, 22, 179, + 31, 163, 164, 165, 173, 89, 90, 162, 128, 170, + 136, 172, 52, 31, 169, 171, 175, 176, 177, 178, + 181, 182, 183, 50, 120, 74, 80, 157 }; -static const yytype_int16 yycheck[] = +static const yytype_uint8 yycheck[] = { - 5, 6, 0, 8, 58, 59, 11, 86, 87, 4, - 5, 6, 7, 8, 9, 10, 11, 30, 97, 14, - 15, 27, 25, 26, 25, 26, 29, 33, 30, 83, - 84, 34, 25, 67, 25, 30, 70, 30, 72, 0, - 1, 95, 3, 4, 5, 6, 7, 8, 9, 10, - 11, 12, 25, 14, 15, 16, 17, 18, 19, 20, - 21, 22, 23, 30, 25, 25, 1, 146, 30, 30, - 5, 6, 1, 8, 9, 10, 11, 12, 1, 14, - 15, 16, 17, 18, 19, 20, 140, 30, 93, 67, - 25, 30, 70, 30, 72, 30, 28, 25, 26, 31, - 32, 155, 24, 108, 0, 1, 30, 3, 4, 5, + 1, 66, 67, 10, 92, 93, 3, 25, 26, 14, + 3, 29, 13, 27, 15, 103, 34, 18, 75, 33, + 0, 78, 30, 80, 89, 90, 31, 32, 28, 25, + 26, 31, 32, 30, 0, 1, 101, 30, 4, 5, 6, 7, 8, 9, 10, 11, 12, 30, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, 69, 25, - 71, 30, 0, 1, 30, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 31, 32, 14, 15, 16, 17, - 18, 19, 20, 21, 22, 5, 6, 25, 8, 9, - 10, 11, 30, 30, 14, 15, 30, 0, 1, 174, - 3, 4, 5, 6, 7, 8, 9, 10, 11, 30, + 16, 17, 18, 19, 20, 21, 22, 23, 30, 25, + 25, 68, 25, 151, 30, 30, 30, 0, 1, 25, + 26, 4, 5, 6, 7, 8, 9, 10, 11, 12, + 145, 14, 15, 16, 17, 18, 19, 20, 21, 22, + 23, 75, 25, 25, 78, 160, 80, 30, 99, 30, + 0, 1, 31, 32, 4, 5, 6, 7, 8, 9, + 10, 11, 25, 114, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 76, 77, 25, 79, 0, 1, 1, + 30, 4, 5, 6, 7, 8, 9, 10, 11, 1, 30, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 68, 69, 25, 71, 69, 1, 71, 30, 4, 5, + 76, 77, 25, 79, 0, 1, 30, 30, 4, 5, 6, 7, 8, 9, 10, 11, 30, 30, 14, 15, - 16, 14, 143, 144, 145, 68, 69, 30, 71, 25, - 151, 25, 153, 1, 30, 30, 31, 32, 31, 32, - 161, 30, 31, 32, 13, 30, 25, 14, 32, 30, - 30, 33, 30, 30, 30, 30, 30, 30, 30, 29, - 67, 109, 60, -1, -1, -1, -1, -1, -1, 40 + 16, 17, 18, 19, 20, 21, 22, 30, 179, 25, + 30, 1, 30, 30, 30, 5, 6, 30, 8, 9, + 10, 11, 12, 30, 14, 15, 16, 17, 18, 19, + 20, 30, 31, 32, 30, 25, 24, 77, 1, 79, + 30, 4, 5, 6, 7, 8, 9, 10, 11, 25, + 1, 14, 15, 16, 4, 5, 6, 7, 8, 9, + 10, 11, 25, 30, 14, 15, 13, 30, 5, 6, + 25, 8, 9, 10, 11, 32, 14, 14, 15, 33, + 30, 148, 149, 150, 30, 31, 32, 30, 77, 156, + 79, 158, 7, 30, 30, 30, 30, 30, 30, 166, + 30, 30, 30, 6, 75, 36, 47, 115 }; /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing symbol of state STATE-NUM. */ static const yytype_uint8 yystos[] = { - 0, 36, 37, 0, 1, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 14, 15, 16, 17, 18, 19, - 20, 21, 22, 25, 30, 38, 39, 41, 42, 43, - 44, 50, 51, 53, 57, 59, 61, 62, 64, 66, - 67, 68, 75, 30, 25, 26, 74, 74, 30, 74, - 25, 80, 30, 74, 25, 25, 25, 26, 29, 34, - 78, 79, 30, 1, 1, 45, 45, 54, 56, 60, - 71, 65, 71, 30, 76, 30, 30, 30, 30, 30, - 30, 78, 78, 31, 32, 76, 27, 33, 30, 30, - 1, 12, 16, 18, 19, 20, 21, 22, 23, 25, - 30, 40, 46, 47, 69, 70, 72, 17, 18, 19, - 20, 30, 40, 55, 70, 72, 39, 52, 75, 39, - 53, 58, 64, 75, 30, 40, 72, 39, 53, 63, - 64, 75, 30, 28, 78, 78, 79, 79, 30, 30, - 24, 74, 73, 74, 78, 25, 79, 48, 1, 13, - 30, 74, 73, 25, 78, 14, 77, 30, 77, 77, - 77, 79, 25, 30, 30, 77, 30, 77, 30, 78, - 30, 30, 30, 77, 33, 49, 30, 30, 30, 74 + 0, 3, 30, 36, 37, 38, 62, 78, 25, 26, + 76, 0, 1, 4, 5, 6, 7, 8, 9, 10, + 11, 14, 15, 16, 17, 18, 19, 20, 21, 22, + 25, 30, 39, 40, 42, 43, 44, 45, 51, 52, + 54, 58, 60, 63, 64, 66, 68, 69, 70, 77, + 38, 30, 37, 78, 30, 76, 30, 76, 25, 82, + 30, 76, 25, 25, 25, 26, 29, 34, 80, 81, + 30, 1, 1, 46, 46, 55, 57, 61, 73, 67, + 73, 30, 30, 30, 30, 30, 30, 80, 80, 31, + 32, 78, 27, 33, 30, 30, 1, 12, 16, 18, + 19, 20, 21, 22, 23, 25, 30, 41, 47, 48, + 71, 72, 74, 17, 18, 19, 20, 30, 41, 56, + 72, 74, 40, 53, 77, 40, 54, 59, 66, 77, + 30, 41, 74, 40, 54, 65, 66, 77, 28, 80, + 80, 81, 81, 30, 30, 24, 76, 75, 76, 80, + 25, 81, 49, 1, 13, 30, 76, 75, 25, 80, + 14, 79, 30, 79, 79, 79, 81, 25, 30, 30, + 79, 30, 79, 30, 80, 30, 30, 30, 79, 33, + 50, 30, 30, 30, 76 }; #define yyerrok (yyerrstatus = 0) @@ -1284,7 +1292,7 @@ yydestruct (yymsg, yytype, yyvaluep) switch (yytype) { - case 51: /* "choice_entry" */ + case 52: /* "choice_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1294,7 +1302,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 57: /* "if_entry" */ + case 58: /* "if_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1304,7 +1312,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 62: /* "menu_entry" */ + case 64: /* "menu_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1614,39 +1622,39 @@ yyreduce: YY_REDUCE_PRINT (yyn); switch (yyn) { - case 8: + case 10: { zconf_error("unexpected end statement"); ;} break; - case 9: + case 11: { zconf_error("unknown statement \"%s\"", (yyvsp[(2) - (4)].string)); ;} break; - case 10: + case 12: { zconf_error("unexpected option \"%s\"", kconf_id_strings + (yyvsp[(2) - (4)].id)->name); ;} break; - case 11: + case 13: { zconf_error("invalid statement"); ;} break; - case 25: + case 27: { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;} break; - case 26: + case 28: { zconf_error("invalid option"); ;} break; - case 27: + case 29: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1656,7 +1664,7 @@ yyreduce: ;} break; - case 28: + case 30: { menu_end_entry(); @@ -1664,7 +1672,7 @@ yyreduce: ;} break; - case 29: + case 31: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1674,7 +1682,7 @@ yyreduce: ;} break; - case 30: + case 32: { if (current_entry->prompt) @@ -1686,7 +1694,7 @@ yyreduce: ;} break; - case 38: + case 40: { menu_set_type((yyvsp[(1) - (3)].id)->stype); @@ -1696,7 +1704,7 @@ yyreduce: ;} break; - case 39: + case 41: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1704,7 +1712,7 @@ yyreduce: ;} break; - case 40: + case 42: { menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr)); @@ -1716,7 +1724,7 @@ yyreduce: ;} break; - case 41: + case 43: { menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr)); @@ -1724,7 +1732,7 @@ yyreduce: ;} break; - case 42: + case 44: { menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr)); @@ -1732,7 +1740,7 @@ yyreduce: ;} break; - case 45: + case 47: { struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string))); @@ -1744,17 +1752,17 @@ yyreduce: ;} break; - case 46: + case 48: { (yyval.string) = NULL; ;} break; - case 47: + case 49: { (yyval.string) = (yyvsp[(2) - (2)].string); ;} break; - case 48: + case 50: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE); @@ -1765,14 +1773,14 @@ yyreduce: ;} break; - case 49: + case 51: { (yyval.menu) = menu_add_menu(); ;} break; - case 50: + case 52: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) { @@ -1782,7 +1790,7 @@ yyreduce: ;} break; - case 58: + case 60: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1790,7 +1798,7 @@ yyreduce: ;} break; - case 59: + case 61: { if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) { @@ -1803,7 +1811,7 @@ yyreduce: ;} break; - case 60: + case 62: { current_entry->sym->flags |= SYMBOL_OPTIONAL; @@ -1811,7 +1819,7 @@ yyreduce: ;} break; - case 61: + case 63: { if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) { @@ -1823,7 +1831,7 @@ yyreduce: ;} break; - case 64: + case 66: { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); @@ -1833,7 +1841,7 @@ yyreduce: ;} break; - case 65: + case 67: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) { @@ -1843,7 +1851,14 @@ yyreduce: ;} break; - case 71: + case 73: + + { + menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL); +;} + break; + + case 74: { menu_add_entry(NULL); @@ -1852,14 +1867,14 @@ yyreduce: ;} break; - case 72: + case 75: { (yyval.menu) = menu_add_menu(); ;} break; - case 73: + case 76: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) { @@ -1869,7 +1884,7 @@ yyreduce: ;} break; - case 79: + case 82: { printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); @@ -1877,7 +1892,7 @@ yyreduce: ;} break; - case 80: + case 83: { menu_add_entry(NULL); @@ -1886,14 +1901,14 @@ yyreduce: ;} break; - case 81: + case 84: { menu_end_entry(); ;} break; - case 82: + case 85: { printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); @@ -1901,14 +1916,14 @@ yyreduce: ;} break; - case 83: + case 86: { current_entry->help = (yyvsp[(2) - (2)].string); ;} break; - case 88: + case 91: { menu_add_dep((yyvsp[(3) - (4)].expr)); @@ -1916,84 +1931,84 @@ yyreduce: ;} break; - case 90: + case 93: { menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr)); ;} break; - case 93: + case 96: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 94: + case 97: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 95: + case 98: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 98: + case 101: { (yyval.expr) = NULL; ;} break; - case 99: + case 102: { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;} break; - case 100: + case 103: { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;} break; - case 101: + case 104: { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 102: + case 105: { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 103: + case 106: { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;} break; - case 104: + case 107: { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;} break; - case 105: + case 108: { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 106: + case 109: { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 107: + case 110: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;} break; - case 108: + case 111: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;} break; - case 109: + case 112: { (yyval.string) = NULL; ;} break; @@ -2239,6 +2254,10 @@ void conf_parse(const char *name) prop = prop_alloc(P_DEFAULT, modules_sym); prop->expr = expr_alloc_symbol(sym_lookup("MODULES", 0)); } + + rootmenu.prompt->text = _(rootmenu.prompt->text); + rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text); + menu_finalize(&rootmenu); for_all_symbols(i, sym) { if (sym_check_deps(sym)) -- cgit v1.2.3-70-g09d2 From 76a540958af5390a94b7f68c46cb7f2aed34ccf1 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Wed, 18 Aug 2010 01:23:50 -0400 Subject: kconfig: add a symbol string expansion helper Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/lkc_proto.h | 1 + scripts/kconfig/symbol.c | 49 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h index 9a948c9ce44..4531badb3fe 100644 --- a/scripts/kconfig/lkc_proto.h +++ b/scripts/kconfig/lkc_proto.h @@ -28,6 +28,7 @@ P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]); P(sym_lookup,struct symbol *,(const char *name, int flags)); P(sym_find,struct symbol *,(const char *name)); +P(sym_expand_string_value,const char *,(const char *in)); P(sym_re_search,struct symbol **,(const char *pattern)); P(sym_type_name,const char *,(enum symbol_type type)); P(sym_calc_value,void,(struct symbol *sym)); diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 943712ca6c0..dc5dcf2189a 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -840,6 +840,55 @@ struct symbol *sym_find(const char *name) return symbol; } +/* + * Expand symbol's names embedded in the string given in argument. Symbols' + * name to be expanded shall be prefixed by a '$'. Unknown symbol expands to + * the empty string. + */ +const char *sym_expand_string_value(const char *in) +{ + const char *src; + char *res; + size_t reslen; + + reslen = strlen(in) + 1; + res = malloc(reslen); + res[0] = '\0'; + + while ((src = strchr(in, '$'))) { + char *p, name[SYMBOL_MAXLENGTH]; + const char *symval = ""; + struct symbol *sym; + size_t newlen; + + strncat(res, in, src - in); + src++; + + p = name; + while (isalnum(*src) || *src == '_') + *p++ = *src++; + *p = '\0'; + + sym = sym_find(name); + if (sym != NULL) { + sym_calc_value(sym); + symval = sym_get_string_value(sym); + } + + newlen = strlen(res) + strlen(symval) + strlen(src); + if (newlen > reslen) { + reslen = newlen; + realloc(res, reslen); + } + + strcat(res, symval); + in = src; + } + strcat(res, in); + + return res; +} + struct symbol **sym_re_search(const char *pattern) { struct symbol *sym, **sym_arr = NULL; -- cgit v1.2.3-70-g09d2 From f6ce00b8cca0517f7296cd76059e1fb37d01c871 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Thu, 9 Sep 2010 21:17:26 -0400 Subject: kconfig: expand by default the rootmenu's prompt Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/zconf.y | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index e9b14efd741..2abd3c7ff15 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -502,6 +502,10 @@ void conf_parse(const char *name) prop = prop_alloc(P_DEFAULT, modules_sym); prop->expr = expr_alloc_symbol(sym_lookup("MODULES", 0)); } + + rootmenu.prompt->text = _(rootmenu.prompt->text); + rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text); + menu_finalize(&rootmenu); for_all_symbols(i, sym) { if (sym_check_deps(sym)) -- cgit v1.2.3-70-g09d2 From c55c9d571a3db7a096834b6c8a58d5a32dc807e6 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sun, 19 Sep 2010 22:47:17 -0400 Subject: kconfig: delay gconf window initialization Delay the window initialization to let the rootmenu's prompt be initialized as it will be used to get the window's title. Signed-off-by: Arnaud Lacombe --- scripts/kconfig/gconf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c index 16362139d52..262fbd19c1e 100644 --- a/scripts/kconfig/gconf.c +++ b/scripts/kconfig/gconf.c @@ -1530,12 +1530,6 @@ int main(int ac, char *av[]) else glade_file = g_strconcat(g_get_current_dir(), "/", av[0], ".glade", NULL); - /* Load the interface and connect signals */ - init_main_window(glade_file); - init_tree_model(); - init_left_tree(); - init_right_tree(); - /* Conf stuffs */ if (ac > 1 && av[1][0] == '-') { switch (av[1][1]) { @@ -1555,6 +1549,12 @@ int main(int ac, char *av[]) fixup_rootmenu(&rootmenu); conf_read(NULL); + /* Load the interface and connect signals */ + init_main_window(glade_file); + init_tree_model(); + init_left_tree(); + init_right_tree(); + switch (view_mode) { case SINGLE_VIEW: display_tree_part(); -- cgit v1.2.3-70-g09d2 From 0954828fcbf3bd13d593499b16b901a4e801b0b9 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Wed, 18 Aug 2010 01:57:13 -0400 Subject: kconfig: replace KERNELVERSION usage by the mainmenu's prompt Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/confdata.c | 16 ++++++---------- scripts/kconfig/gconf.c | 5 +---- scripts/kconfig/mconf.c | 6 +----- scripts/kconfig/nconf.c | 6 +----- scripts/kconfig/qconf.cc | 4 ++-- 5 files changed, 11 insertions(+), 26 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 9f3c8899da5..f7d89d7065b 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -574,8 +574,6 @@ int conf_write(const char *name) if (!out) return 1; - sym = sym_lookup("KERNELVERSION", 0); - sym_calc_value(sym); time(&now); env = getenv("KCONFIG_NOTIMESTAMP"); if (env && *env) @@ -583,10 +581,10 @@ int conf_write(const char *name) fprintf(out, _("#\n" "# Automatically generated make config: don't edit\n" - "# Linux kernel version: %s\n" + "# %s\n" "%s%s" "#\n"), - sym_get_string_value(sym), + rootmenu.prompt->text, use_timestamp ? "# " : "", use_timestamp ? ctime(&now) : ""); @@ -797,25 +795,23 @@ int conf_write_autoconf(void) return 1; } - sym = sym_lookup("KERNELVERSION", 0); - sym_calc_value(sym); time(&now); fprintf(out, "#\n" "# Automatically generated make config: don't edit\n" - "# Linux kernel version: %s\n" + "# %s\n" "# %s" "#\n", - sym_get_string_value(sym), ctime(&now)); + rootmenu.prompt->text, ctime(&now)); fprintf(tristate, "#\n" "# Automatically generated - do not edit\n" "\n"); fprintf(out_h, "/*\n" " * Automatically generated C config: don't edit\n" - " * Linux kernel version: %s\n" + " * %s\n" " * %s" " */\n" "#define AUTOCONF_INCLUDED\n", - sym_get_string_value(sym), ctime(&now)); + rootmenu.prompt->text, ctime(&now)); for_all_symbols(i, sym) { sym_calc_value(sym); diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c index 262fbd19c1e..455896164d7 100644 --- a/scripts/kconfig/gconf.c +++ b/scripts/kconfig/gconf.c @@ -133,7 +133,6 @@ void init_main_window(const gchar * glade_file) GladeXML *xml; GtkWidget *widget; GtkTextBuffer *txtbuf; - char title[256]; GtkStyle *style; xml = glade_xml_new(glade_file, "window1", NULL); @@ -210,9 +209,7 @@ void init_main_window(const gchar * glade_file) /*"style", PANGO_STYLE_OBLIQUE, */ NULL); - sprintf(title, _("Linux Kernel v%s Configuration"), - getenv("KERNELVERSION")); - gtk_window_set_title(GTK_WINDOW(main_wnd), title); + gtk_window_set_title(GTK_WINDOW(main_wnd), rootmenu.prompt->text); gtk_widget_show(main_wnd); } diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index cee4281ad20..d433c7a2474 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -288,13 +288,9 @@ static void set_config_filename(const char *config_filename) { static char menu_backtitle[PATH_MAX+128]; int size; - struct symbol *sym; - sym = sym_lookup("KERNELVERSION", 0); - sym_calc_value(sym); size = snprintf(menu_backtitle, sizeof(menu_backtitle), - _("%s - Linux Kernel v%s Configuration"), - config_filename, sym_get_string_value(sym)); + "%s - %s", config_filename, rootmenu.prompt->text); if (size >= sizeof(menu_backtitle)) menu_backtitle[sizeof(menu_backtitle)-1] = '\0'; set_dialog_backtitle(menu_backtitle); diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index 801cc048704..545e1af7cb6 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -633,13 +633,9 @@ static char menu_backtitle[PATH_MAX+128]; static const char *set_config_filename(const char *config_filename) { int size; - struct symbol *sym; - sym = sym_lookup("KERNELVERSION", 0); - sym_calc_value(sym); size = snprintf(menu_backtitle, sizeof(menu_backtitle), - _("%s - Linux Kernel v%s Configuration"), - config_filename, sym_get_string_value(sym)); + "%s - %s", config_filename, rootmenu.prompt->text); if (size >= sizeof(menu_backtitle)) menu_backtitle[sizeof(menu_backtitle)-1] = '\0'; diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc index fe18f7efdca..06dd2e33581 100644 --- a/scripts/kconfig/qconf.cc +++ b/scripts/kconfig/qconf.cc @@ -1274,8 +1274,8 @@ ConfigMainWindow::ConfigMainWindow(void) char title[256]; QDesktopWidget *d = configApp->desktop(); - snprintf(title, sizeof(title), _("Linux Kernel v%s Configuration%s"), - getenv("KERNELVERSION"), + snprintf(title, sizeof(title), "%s%s", + rootmenu.prompt->text, #if QT_VERSION < 0x040000 " (Qt3)" #else -- cgit v1.2.3-70-g09d2 From ba6ff60d5eb47d52f1a5eb0bb6ffa751be838c46 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 4 Sep 2010 16:05:15 -0400 Subject: kconfig: don't emit warning upon rootmenu's prompt redefinition This silences the warning printed upon prompt redefinition for the rootmenu. We will encounter this redefinition when a "mainmenu" statement is specified and override the default prompt. Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/menu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 682045a7aae..23acbdb2fd5 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -139,7 +139,7 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e while (isspace(*prompt)) prompt++; } - if (current_entry->prompt) + if (current_entry->prompt && current_entry != &rootmenu) prop_warn(prop, "prompt redefined"); current_entry->prompt = prop; } -- cgit v1.2.3-70-g09d2 From 2e7a091833f014cac8a6b92573ca6cd2edd2753c Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 4 Sep 2010 16:03:30 -0400 Subject: kconfig: constify file name Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/expr.h | 2 +- scripts/kconfig/lkc.h | 2 +- scripts/kconfig/zconf.l | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 6ee2e4fb148..648c609caba 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -18,7 +18,7 @@ extern "C" { struct file { struct file *next; struct file *parent; - char *name; + const char *name; int lineno; int flags; }; diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 5d5f1872d65..753cdbd7b80 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -76,7 +76,7 @@ FILE *zconf_fopen(const char *name); void zconf_initscan(const char *name); void zconf_nextfile(const char *name); int zconf_lineno(void); -char *zconf_curname(void); +const char *zconf_curname(void); /* conf.c */ void xfgets(char *str, int size, FILE *in); diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l index d8f7236cb0a..2b0265082d0 100644 --- a/scripts/kconfig/zconf.l +++ b/scripts/kconfig/zconf.l @@ -353,7 +353,7 @@ int zconf_lineno(void) return current_pos.lineno; } -char *zconf_curname(void) +const char *zconf_curname(void) { return current_pos.file ? current_pos.file->name : ""; } -- cgit v1.2.3-70-g09d2 From e82dae9083c8ca97c0f6ba1f5d09591aff67bb4e Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 4 Sep 2010 16:09:26 -0400 Subject: kconfig: use the file's name of sourced file Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/zconf.l | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l index 2b0265082d0..3dbaec185cc 100644 --- a/scripts/kconfig/zconf.l +++ b/scripts/kconfig/zconf.l @@ -304,9 +304,10 @@ void zconf_nextfile(const char *name) memset(buf, 0, sizeof(*buf)); current_buf->state = YY_CURRENT_BUFFER; - yyin = zconf_fopen(name); + yyin = zconf_fopen(file->name); if (!yyin) { - printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name); + printf("%s:%d: can't open file \"%s\"\n", + zconf_curname(), zconf_lineno(), file->name); exit(1); } yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); -- cgit v1.2.3-70-g09d2 From c7abe8630ae63e90c2267c2c385a682e729e08be Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 4 Sep 2010 16:11:26 -0400 Subject: kconfig: expand file names This will allow to use the following construct in source files: config FOO string default "foo" source "$FOO/Kconfig" Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- scripts/kconfig/util.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c index 78b5c04e736..6330cc871a4 100644 --- a/scripts/kconfig/util.c +++ b/scripts/kconfig/util.c @@ -12,15 +12,18 @@ struct file *file_lookup(const char *name) { struct file *file; + const char *file_name = sym_expand_string_value(name); for (file = file_list; file; file = file->next) { - if (!strcmp(name, file->name)) + if (!strcmp(name, file->name)) { + free((void *)file_name); return file; + } } file = malloc(sizeof(*file)); memset(file, 0, sizeof(*file)); - file->name = strdup(name); + file->name = file_name; file->next = file_list; file_list = file; return file; -- cgit v1.2.3-70-g09d2 From 838a2e55e6a4e9e8a10451ed2ef0f7a08dabdb04 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 4 Sep 2010 17:10:20 -0400 Subject: kbuild: migrate all arch to the kconfig mainmenu upgrade Signed-off-by: Arnaud Lacombe Reviewed-by: Sam Ravnborg Reviewed-by: Michal Marek --- Kconfig | 11 +++++++++++ arch/alpha/Kconfig | 4 ---- arch/arm/Kconfig | 7 ------- arch/avr32/Kconfig | 7 ------- arch/blackfin/Kconfig | 7 ------- arch/cris/Kconfig | 7 ------- arch/frv/Kconfig | 6 ------ arch/h8300/Kconfig | 7 ------- arch/ia64/Kconfig | 7 ------- arch/m32r/Kconfig | 7 ------- arch/m68k/Kconfig | 6 ------ arch/m68knommu/Kconfig | 7 ------- arch/microblaze/Kconfig | 5 ----- arch/mips/Kconfig | 2 -- arch/mn10300/Kconfig | 9 --------- arch/parisc/Kconfig | 7 ------- arch/powerpc/Kconfig | 6 ------ arch/s390/Kconfig | 7 ------- arch/score/Kconfig | 5 ----- arch/sh/Kconfig | 7 ------- arch/sparc/Kconfig | 6 ------ arch/um/Kconfig.common | 2 -- arch/x86/Kconfig | 3 --- arch/xtensa/Kconfig | 5 ----- scripts/kconfig/Makefile | 2 +- 25 files changed, 12 insertions(+), 137 deletions(-) create mode 100644 Kconfig (limited to 'scripts') diff --git a/Kconfig b/Kconfig new file mode 100644 index 00000000000..c13f48d6589 --- /dev/null +++ b/Kconfig @@ -0,0 +1,11 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +mainmenu "Linux/$ARCH $KERNELVERSION Kernel Configuration" + +config SRCARCH + string + option env="SRCARCH" + +source "arch/$SRCARCH/Kconfig" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 3e2e540a0f2..95808c13b27 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -1,7 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# config ALPHA bool default y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 98922f7d2d1..c3f4fd96051 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux Kernel Configuration" - config ARM bool default y diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index f2b31933318..ead727e7f4d 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux Kernel Configuration" - config AVR32 def_bool y # With EMBEDDED=n, we get lots of stuff automatically selected diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f66294b4f9d..7051c4ce9b9 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Blackfin Kernel Configuration" - config SYMBOL_PREFIX string default "_" diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index e25bf4440b5..af8e9821adc 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see the Configure script. -# - -mainmenu "Linux/CRIS Kernel Configuration" - config MMU bool default y diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 4b5830bcbe2..06256796200 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -1,7 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# config FRV bool default y @@ -64,8 +60,6 @@ config HZ int default 1000 -mainmenu "Fujitsu FR-V Kernel Configuration" - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 53cc669e6d5..3fe4d5adf9a 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration" - config H8300 bool default y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 95610820041..09ce2ab792e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "IA-64 Linux Kernel Configuration" - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 3a9319f93e8..190270ea739 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux/M32R Kernel Configuration" - config M32R bool default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 2e3737b92ff..1812aa04817 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -1,7 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# config M68K bool default y @@ -65,8 +61,6 @@ config GENERIC_TIME config ARCH_USES_GETTIMEOFFSET def_bool y -mainmenu "Linux/68k Kernel Configuration" - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index efeb6033fc1..e86842dc740 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "uClinux/68k (w/o MMU) Kernel Configuration" - config M68K bool default y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 505a0859242..0c5f43728a7 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -1,8 +1,3 @@ -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. - -mainmenu "Linux/Microblaze Kernel Configuration" - config MICROBLAZE def_bool y select HAVE_MEMBLOCK diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cdaae942623..33771676957 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -12,8 +12,6 @@ config MIPS select HAVE_FUNCTION_GRAPH_TRACER select RTC_LIB if !MACH_LOONGSON -mainmenu "Linux/MIPS Kernel Configuration" - menu "Machine selection" config ZONE_DMA diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1c4565a9102..7bd617c94df 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux Kernel Configuration" - config MN10300 def_bool y select HAVE_OPROFILE @@ -69,8 +62,6 @@ config HZ int default 1000 -mainmenu "Matsushita MN10300/AM33 Kernel Configuration" - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 05a366a5c4d..82cec342bd3 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux/PA-RISC Kernel Configuration" - config PARISC def_bool y select HAVE_IDE diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2031a284686..182743b46e0 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -1,9 +1,3 @@ -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux/PowerPC Kernel Configuration" - source "arch/powerpc/platforms/Kconfig.cputype" config PPC32 diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index bee1c0f794c..3c4d4e69025 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -1,8 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - config SCHED_MC def_bool y depends on SMP @@ -78,8 +73,6 @@ config VIRT_CPU_ACCOUNTING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -mainmenu "Linux Kernel Configuration" - config S390 def_bool y select USE_GENERIC_SMP_HELPERS if SMP diff --git a/arch/score/Kconfig b/arch/score/Kconfig index 55d413e6dcf..5cbc148addf 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -1,8 +1,3 @@ -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. - -mainmenu "Linux/SCORE Kernel Configuration" - menu "Machine selection" choice diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 82868fee21f..8ada4757fc9 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -1,10 +1,3 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux/SuperH Kernel Configuration" - config SUPERH def_bool y select EMBEDDED diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c0015db247b..19aa7b253d7 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -1,9 +1,3 @@ -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "Linux/SPARC Kernel Configuration" - config 64BIT bool "64-bit kernel" if ARCH = "sparc" default ARCH = "sparc64" diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index 0d207e73a75..e90ca8609e3 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -19,8 +19,6 @@ config MMU config NO_IOMEM def_bool y -mainmenu "Linux/Usermode Kernel Configuration" - config ISA bool diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dcb0593b4a6..6c30b9e93d8 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1,6 +1,3 @@ -# x86 configuration -mainmenu "Linux Kernel Configuration for x86" - # Select 32 or 64 bit config 64BIT bool "64-bit kernel" if ARCH = "x86" diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index ebe228d02b0..9e4ef660c9a 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -1,8 +1,3 @@ -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. - -mainmenu "Linux/Xtensa Kernel Configuration" - config FRAME_POINTER def_bool n diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index cef3f75e1c2..52c34b914fc 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -8,7 +8,7 @@ PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-c ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) else -Kconfig := arch/$(SRCARCH)/Kconfig +Kconfig := Kconfig endif xconfig: $(obj)/qconf -- cgit v1.2.3-70-g09d2 From 8c41e5e363db55d91aa3b1cdce4ab02ad9821de7 Mon Sep 17 00:00:00 2001 From: Junio C Hamano Date: Sat, 18 Sep 2010 19:25:32 -0700 Subject: kconfig: fix menuconfig on debian lenny In 60f33b8 (kconfig: get rid of stray a.o, support ncursesw, 2006-01-15), support to link menuconfig with ncursesw library was added. To compute the linker command option -l, we check "libncursesw.{so,a,dylib}" to allow ncursesw to be used as a replacement ncurses. However, when checking what header file to include, we do not check /usr/include/ncursesw directory. Add /usr/include/ncursesw to the list of directories that are checked. With this patch, on my Debian Lenny box with libncursesw5-dev package but not libncurses5-dev package, I can say "make menuconfig". Signed-off-by: Junio C Hamano Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/lxdialog/check-lxdialog.sh | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh index fcef0f59d55..82cc3a85e7f 100644 --- a/scripts/kconfig/lxdialog/check-lxdialog.sh +++ b/scripts/kconfig/lxdialog/check-lxdialog.sh @@ -23,6 +23,8 @@ ccflags() echo '-I/usr/include/ncurses -DCURSES_LOC=""' elif [ -f /usr/include/ncurses/curses.h ]; then echo '-I/usr/include/ncurses -DCURSES_LOC=""' + elif [ -f /usr/include/ncursesw/curses.h ]; then + echo '-I/usr/include/ncursesw -DCURSES_LOC=""' elif [ -f /usr/include/ncurses.h ]; then echo '-DCURSES_LOC=""' else -- cgit v1.2.3-70-g09d2 From bf5438fca2950b03c21ad868090cc1a8fcd49536 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Fri, 17 Sep 2010 11:09:00 -0400 Subject: jump label: Base patch for jump label base patch to implement 'jump labeling'. Based on a new 'asm goto' inline assembly gcc mechanism, we can now branch to labels from an 'asm goto' statment. This allows us to create a 'no-op' fastpath, which can subsequently be patched with a jump to the slowpath code. This is useful for code which might be rarely used, but which we'd like to be able to call, if needed. Tracepoints are the current usecase that these are being implemented for. Acked-by: David S. Miller Signed-off-by: Jason Baron LKML-Reference: [ cleaned up some formating ] Signed-off-by: Steven Rostedt --- Makefile | 5 + arch/Kconfig | 3 + arch/x86/include/asm/alternative.h | 3 +- arch/x86/kernel/alternative.c | 2 +- include/asm-generic/vmlinux.lds.h | 10 ++ include/linux/jump_label.h | 58 +++++++ include/linux/module.h | 5 +- kernel/Makefile | 2 +- kernel/jump_label.c | 346 +++++++++++++++++++++++++++++++++++++ kernel/kprobes.c | 1 + kernel/module.c | 6 + scripts/gcc-goto.sh | 5 + 12 files changed, 442 insertions(+), 4 deletions(-) create mode 100644 include/linux/jump_label.h create mode 100644 kernel/jump_label.c create mode 100644 scripts/gcc-goto.sh (limited to 'scripts') diff --git a/Makefile b/Makefile index 92ab33f16cf..a906378d505 100644 --- a/Makefile +++ b/Makefile @@ -591,6 +591,11 @@ KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) # conserve stack if available KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) +# check for 'asm goto' +ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) + KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO +endif + # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments # But warn user when we do so warn-assign = \ diff --git a/arch/Kconfig b/arch/Kconfig index 4877a8c8ee1..1462d8492d8 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -158,4 +158,7 @@ config HAVE_PERF_EVENTS_NMI subsystem. Also has support for calculating CPU cycle events to determine how many clock cycles in a given period. +config HAVE_ARCH_JUMP_LABEL + bool + source "kernel/gcov/Kconfig" diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 634bf782dca..76561d20ea2 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -4,6 +4,7 @@ #include #include #include +#include #include /* @@ -182,7 +183,7 @@ extern void *text_poke_early(void *addr, const void *opcode, size_t len); extern void *text_poke(void *addr, const void *opcode, size_t len); extern void *text_poke_smp(void *addr, const void *opcode, size_t len); -#if defined(CONFIG_DYNAMIC_FTRACE) +#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) #define IDEAL_NOP_SIZE_5 5 extern unsigned char ideal_nop5[IDEAL_NOP_SIZE_5]; extern void arch_init_ideal_nop5(void); diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 083bd010d92..cb0e6d385f6 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -641,7 +641,7 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len) return addr; } -#if defined(CONFIG_DYNAMIC_FTRACE) +#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) unsigned char ideal_nop5[IDEAL_NOP_SIZE_5]; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 8a92a170fb7..ef2af9948ea 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -220,6 +220,8 @@ \ BUG_TABLE \ \ + JUMP_TABLE \ + \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \ @@ -563,6 +565,14 @@ #define BUG_TABLE #endif +#define JUMP_TABLE \ + . = ALIGN(8); \ + __jump_table : AT(ADDR(__jump_table) - LOAD_OFFSET) { \ + VMLINUX_SYMBOL(__start___jump_table) = .; \ + *(__jump_table) \ + VMLINUX_SYMBOL(__stop___jump_table) = .; \ + } + #ifdef CONFIG_PM_TRACE #define TRACEDATA \ . = ALIGN(4); \ diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h new file mode 100644 index 00000000000..de58656d28e --- /dev/null +++ b/include/linux/jump_label.h @@ -0,0 +1,58 @@ +#ifndef _LINUX_JUMP_LABEL_H +#define _LINUX_JUMP_LABEL_H + +#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_HAVE_ARCH_JUMP_LABEL) +# include +# define HAVE_JUMP_LABEL +#endif + +enum jump_label_type { + JUMP_LABEL_ENABLE, + JUMP_LABEL_DISABLE +}; + +struct module; + +#ifdef HAVE_JUMP_LABEL + +extern struct jump_entry __start___jump_table[]; +extern struct jump_entry __stop___jump_table[]; + +extern void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type); +extern void jump_label_update(unsigned long key, enum jump_label_type type); +extern void jump_label_apply_nops(struct module *mod); +extern void arch_jump_label_text_poke_early(jump_label_t addr); + +#define enable_jump_label(key) \ + jump_label_update((unsigned long)key, JUMP_LABEL_ENABLE); + +#define disable_jump_label(key) \ + jump_label_update((unsigned long)key, JUMP_LABEL_DISABLE); + +#else + +#define JUMP_LABEL(key, label) \ +do { \ + if (unlikely(*key)) \ + goto label; \ +} while (0) + +#define enable_jump_label(cond_var) \ +do { \ + *(cond_var) = 1; \ +} while (0) + +#define disable_jump_label(cond_var) \ +do { \ + *(cond_var) = 0; \ +} while (0) + +static inline int jump_label_apply_nops(struct module *mod) +{ + return 0; +} + +#endif + +#endif diff --git a/include/linux/module.h b/include/linux/module.h index 8a6b9fdc7ff..403ac26023c 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -350,7 +350,10 @@ struct module struct tracepoint *tracepoints; unsigned int num_tracepoints; #endif - +#ifdef HAVE_JUMP_LABEL + struct jump_entry *jump_entries; + unsigned int num_jump_entries; +#endif #ifdef CONFIG_TRACING const char **trace_bprintk_fmt_start; unsigned int num_trace_bprintk_fmt; diff --git a/kernel/Makefile b/kernel/Makefile index 0b72d1a74be..d52b473c99a 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -10,7 +10,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ - async.o range.o + async.o range.o jump_label.o obj-$(CONFIG_HAVE_EARLY_RES) += early_res.o obj-y += groups.o diff --git a/kernel/jump_label.c b/kernel/jump_label.c new file mode 100644 index 00000000000..460fd40112b --- /dev/null +++ b/kernel/jump_label.c @@ -0,0 +1,346 @@ +/* + * jump label support + * + * Copyright (C) 2009 Jason Baron + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef HAVE_JUMP_LABEL + +#define JUMP_LABEL_HASH_BITS 6 +#define JUMP_LABEL_TABLE_SIZE (1 << JUMP_LABEL_HASH_BITS) +static struct hlist_head jump_label_table[JUMP_LABEL_TABLE_SIZE]; + +/* mutex to protect coming/going of the the jump_label table */ +static DEFINE_MUTEX(jump_label_mutex); + +struct jump_label_entry { + struct hlist_node hlist; + struct jump_entry *table; + int nr_entries; + /* hang modules off here */ + struct hlist_head modules; + unsigned long key; +}; + +struct jump_label_module_entry { + struct hlist_node hlist; + struct jump_entry *table; + int nr_entries; + struct module *mod; +}; + +static int jump_label_cmp(const void *a, const void *b) +{ + const struct jump_entry *jea = a; + const struct jump_entry *jeb = b; + + if (jea->key < jeb->key) + return -1; + + if (jea->key > jeb->key) + return 1; + + return 0; +} + +static void +sort_jump_label_entries(struct jump_entry *start, struct jump_entry *stop) +{ + unsigned long size; + + size = (((unsigned long)stop - (unsigned long)start) + / sizeof(struct jump_entry)); + sort(start, size, sizeof(struct jump_entry), jump_label_cmp, NULL); +} + +static struct jump_label_entry *get_jump_label_entry(jump_label_t key) +{ + struct hlist_head *head; + struct hlist_node *node; + struct jump_label_entry *e; + u32 hash = jhash((void *)&key, sizeof(jump_label_t), 0); + + head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)]; + hlist_for_each_entry(e, node, head, hlist) { + if (key == e->key) + return e; + } + return NULL; +} + +static struct jump_label_entry * +add_jump_label_entry(jump_label_t key, int nr_entries, struct jump_entry *table) +{ + struct hlist_head *head; + struct jump_label_entry *e; + u32 hash; + + e = get_jump_label_entry(key); + if (e) + return ERR_PTR(-EEXIST); + + e = kmalloc(sizeof(struct jump_label_entry), GFP_KERNEL); + if (!e) + return ERR_PTR(-ENOMEM); + + hash = jhash((void *)&key, sizeof(jump_label_t), 0); + head = &jump_label_table[hash & (JUMP_LABEL_TABLE_SIZE - 1)]; + e->key = key; + e->table = table; + e->nr_entries = nr_entries; + INIT_HLIST_HEAD(&(e->modules)); + hlist_add_head(&e->hlist, head); + return e; +} + +static int +build_jump_label_hashtable(struct jump_entry *start, struct jump_entry *stop) +{ + struct jump_entry *iter, *iter_begin; + struct jump_label_entry *entry; + int count; + + sort_jump_label_entries(start, stop); + iter = start; + while (iter < stop) { + entry = get_jump_label_entry(iter->key); + if (!entry) { + iter_begin = iter; + count = 0; + while ((iter < stop) && + (iter->key == iter_begin->key)) { + iter++; + count++; + } + entry = add_jump_label_entry(iter_begin->key, + count, iter_begin); + if (IS_ERR(entry)) + return PTR_ERR(entry); + } else { + WARN_ONCE(1, KERN_ERR "build_jump_hashtable: unexpected entry!\n"); + return -1; + } + } + return 0; +} + +/*** + * jump_label_update - update jump label text + * @key - key value associated with a a jump label + * @type - enum set to JUMP_LABEL_ENABLE or JUMP_LABEL_DISABLE + * + * Will enable/disable the jump for jump label @key, depending on the + * value of @type. + * + */ + +void jump_label_update(unsigned long key, enum jump_label_type type) +{ + struct jump_entry *iter; + struct jump_label_entry *entry; + struct hlist_node *module_node; + struct jump_label_module_entry *e_module; + int count; + + mutex_lock(&jump_label_mutex); + entry = get_jump_label_entry((jump_label_t)key); + if (entry) { + count = entry->nr_entries; + iter = entry->table; + while (count--) { + if (kernel_text_address(iter->code)) + arch_jump_label_transform(iter, type); + iter++; + } + /* eanble/disable jump labels in modules */ + hlist_for_each_entry(e_module, module_node, &(entry->modules), + hlist) { + count = e_module->nr_entries; + iter = e_module->table; + while (count--) { + if (kernel_text_address(iter->code)) + arch_jump_label_transform(iter, type); + iter++; + } + } + } + mutex_unlock(&jump_label_mutex); +} + +static __init int init_jump_label(void) +{ + int ret; + struct jump_entry *iter_start = __start___jump_table; + struct jump_entry *iter_stop = __stop___jump_table; + struct jump_entry *iter; + + mutex_lock(&jump_label_mutex); + ret = build_jump_label_hashtable(__start___jump_table, + __stop___jump_table); + iter = iter_start; + while (iter < iter_stop) { + arch_jump_label_text_poke_early(iter->code); + iter++; + } + mutex_unlock(&jump_label_mutex); + return ret; +} +early_initcall(init_jump_label); + +#ifdef CONFIG_MODULES + +static struct jump_label_module_entry * +add_jump_label_module_entry(struct jump_label_entry *entry, + struct jump_entry *iter_begin, + int count, struct module *mod) +{ + struct jump_label_module_entry *e; + + e = kmalloc(sizeof(struct jump_label_module_entry), GFP_KERNEL); + if (!e) + return ERR_PTR(-ENOMEM); + e->mod = mod; + e->nr_entries = count; + e->table = iter_begin; + hlist_add_head(&e->hlist, &entry->modules); + return e; +} + +static int add_jump_label_module(struct module *mod) +{ + struct jump_entry *iter, *iter_begin; + struct jump_label_entry *entry; + struct jump_label_module_entry *module_entry; + int count; + + /* if the module doesn't have jump label entries, just return */ + if (!mod->num_jump_entries) + return 0; + + sort_jump_label_entries(mod->jump_entries, + mod->jump_entries + mod->num_jump_entries); + iter = mod->jump_entries; + while (iter < mod->jump_entries + mod->num_jump_entries) { + entry = get_jump_label_entry(iter->key); + iter_begin = iter; + count = 0; + while ((iter < mod->jump_entries + mod->num_jump_entries) && + (iter->key == iter_begin->key)) { + iter++; + count++; + } + if (!entry) { + entry = add_jump_label_entry(iter_begin->key, 0, NULL); + if (IS_ERR(entry)) + return PTR_ERR(entry); + } + module_entry = add_jump_label_module_entry(entry, iter_begin, + count, mod); + if (IS_ERR(module_entry)) + return PTR_ERR(module_entry); + } + return 0; +} + +static void remove_jump_label_module(struct module *mod) +{ + struct hlist_head *head; + struct hlist_node *node, *node_next, *module_node, *module_node_next; + struct jump_label_entry *e; + struct jump_label_module_entry *e_module; + int i; + + /* if the module doesn't have jump label entries, just return */ + if (!mod->num_jump_entries) + return; + + for (i = 0; i < JUMP_LABEL_TABLE_SIZE; i++) { + head = &jump_label_table[i]; + hlist_for_each_entry_safe(e, node, node_next, head, hlist) { + hlist_for_each_entry_safe(e_module, module_node, + module_node_next, + &(e->modules), hlist) { + if (e_module->mod == mod) { + hlist_del(&e_module->hlist); + kfree(e_module); + } + } + if (hlist_empty(&e->modules) && (e->nr_entries == 0)) { + hlist_del(&e->hlist); + kfree(e); + } + } + } +} + +static int +jump_label_module_notify(struct notifier_block *self, unsigned long val, + void *data) +{ + struct module *mod = data; + int ret = 0; + + switch (val) { + case MODULE_STATE_COMING: + mutex_lock(&jump_label_mutex); + ret = add_jump_label_module(mod); + if (ret) + remove_jump_label_module(mod); + mutex_unlock(&jump_label_mutex); + break; + case MODULE_STATE_GOING: + mutex_lock(&jump_label_mutex); + remove_jump_label_module(mod); + mutex_unlock(&jump_label_mutex); + break; + } + return ret; +} + +/*** + * apply_jump_label_nops - patch module jump labels with arch_get_jump_label_nop() + * @mod: module to patch + * + * Allow for run-time selection of the optimal nops. Before the module + * loads patch these with arch_get_jump_label_nop(), which is specified by + * the arch specific jump label code. + */ +void jump_label_apply_nops(struct module *mod) +{ + struct jump_entry *iter; + + /* if the module doesn't have jump label entries, just return */ + if (!mod->num_jump_entries) + return; + + iter = mod->jump_entries; + while (iter < mod->jump_entries + mod->num_jump_entries) { + arch_jump_label_text_poke_early(iter->code); + iter++; + } +} + +struct notifier_block jump_label_module_nb = { + .notifier_call = jump_label_module_notify, + .priority = 0, +}; + +static __init int init_jump_label_module(void) +{ + return register_module_notifier(&jump_label_module_nb); +} +early_initcall(init_jump_label_module); + +#endif /* CONFIG_MODULES */ + +#endif diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 6dd5359e1f0..18904e42a91 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include diff --git a/kernel/module.c b/kernel/module.c index d0b5f8db11b..eba134157ef 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -55,6 +55,7 @@ #include #include #include +#include #define CREATE_TRACE_POINTS #include @@ -2308,6 +2309,11 @@ static void find_module_sections(struct module *mod, struct load_info *info) sizeof(*mod->tracepoints), &mod->num_tracepoints); #endif +#ifdef HAVE_JUMP_LABEL + mod->jump_entries = section_objs(info, "__jump_table", + sizeof(*mod->jump_entries), + &mod->num_jump_entries); +#endif #ifdef CONFIG_EVENT_TRACING mod->trace_events = section_objs(info, "_ftrace_events", sizeof(*mod->trace_events), diff --git a/scripts/gcc-goto.sh b/scripts/gcc-goto.sh new file mode 100644 index 00000000000..8e82424be7a --- /dev/null +++ b/scripts/gcc-goto.sh @@ -0,0 +1,5 @@ +#!/bin/sh +# Test for gcc 'asm goto' suport +# Copyright (C) 2010, Jason Baron + +echo "int main(void) { entry: asm goto (\"\"::::entry); return 0; }" | $1 -x c - -c -o /dev/null >/dev/null 2>&1 && echo "y" -- cgit v1.2.3-70-g09d2 From 52159d98be6f26c48f5e02c7ab3c9848a85979b5 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Fri, 17 Sep 2010 11:09:17 -0400 Subject: jump label: Convert dynamic debug to use jump labels Convert the 'dynamic debug' infrastructure to use jump labels. Signed-off-by: Jason Baron LKML-Reference: Signed-off-by: Steven Rostedt --- include/linux/dynamic_debug.h | 39 ++++++++++++++------------ lib/dynamic_debug.c | 42 ++-------------------------- scripts/Makefile.lib | 11 +------- scripts/basic/Makefile | 2 +- scripts/basic/hash.c | 64 ------------------------------------------- 5 files changed, 26 insertions(+), 132 deletions(-) delete mode 100644 scripts/basic/hash.c (limited to 'scripts') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 52c0da4bdd1..bef3cda44c4 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -1,6 +1,8 @@ #ifndef _DYNAMIC_DEBUG_H #define _DYNAMIC_DEBUG_H +#include + /* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They * use independent hash functions, to reduce the chance of false positives. @@ -22,8 +24,6 @@ struct _ddebug { const char *function; const char *filename; const char *format; - char primary_hash; - char secondary_hash; unsigned int lineno:24; /* * The flags field controls the behaviour at the callsite. @@ -33,6 +33,7 @@ struct _ddebug { #define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */ #define _DPRINTK_FLAGS_DEFAULT 0 unsigned int flags:8; + char enabled; } __attribute__((aligned(8))); @@ -42,33 +43,35 @@ int ddebug_add_module(struct _ddebug *tab, unsigned int n, #if defined(CONFIG_DYNAMIC_DEBUG) extern int ddebug_remove_module(const char *mod_name); -#define __dynamic_dbg_enabled(dd) ({ \ - int __ret = 0; \ - if (unlikely((dynamic_debug_enabled & (1LL << DEBUG_HASH)) && \ - (dynamic_debug_enabled2 & (1LL << DEBUG_HASH2)))) \ - if (unlikely(dd.flags)) \ - __ret = 1; \ - __ret; }) - #define dynamic_pr_debug(fmt, ...) do { \ + __label__ do_printk; \ + __label__ out; \ static struct _ddebug descriptor \ __used \ __attribute__((section("__verbose"), aligned(8))) = \ - { KBUILD_MODNAME, __func__, __FILE__, fmt, DEBUG_HASH, \ - DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ - if (__dynamic_dbg_enabled(descriptor)) \ - printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ + { KBUILD_MODNAME, __func__, __FILE__, fmt, __LINE__, \ + _DPRINTK_FLAGS_DEFAULT }; \ + JUMP_LABEL(&descriptor.enabled, do_printk); \ + goto out; \ +do_printk: \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ +out: ; \ } while (0) #define dynamic_dev_dbg(dev, fmt, ...) do { \ + __label__ do_printk; \ + __label__ out; \ static struct _ddebug descriptor \ __used \ __attribute__((section("__verbose"), aligned(8))) = \ - { KBUILD_MODNAME, __func__, __FILE__, fmt, DEBUG_HASH, \ - DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ - if (__dynamic_dbg_enabled(descriptor)) \ - dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); \ + { KBUILD_MODNAME, __func__, __FILE__, fmt, __LINE__, \ + _DPRINTK_FLAGS_DEFAULT }; \ + JUMP_LABEL(&descriptor.enabled, do_printk); \ + goto out; \ +do_printk: \ + dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); \ +out: ; \ } while (0) #else diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c index 02afc253372..e925c7b960f 100644 --- a/lib/dynamic_debug.c +++ b/lib/dynamic_debug.c @@ -26,19 +26,11 @@ #include #include #include +#include extern struct _ddebug __start___verbose[]; extern struct _ddebug __stop___verbose[]; -/* dynamic_debug_enabled, and dynamic_debug_enabled2 are bitmasks in which - * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They - * use independent hash functions, to reduce the chance of false positives. - */ -long long dynamic_debug_enabled; -EXPORT_SYMBOL_GPL(dynamic_debug_enabled); -long long dynamic_debug_enabled2; -EXPORT_SYMBOL_GPL(dynamic_debug_enabled2); - struct ddebug_table { struct list_head link; char *mod_name; @@ -87,26 +79,6 @@ static char *ddebug_describe_flags(struct _ddebug *dp, char *buf, return buf; } -/* - * must be called with ddebug_lock held - */ - -static int disabled_hash(char hash, bool first_table) -{ - struct ddebug_table *dt; - char table_hash_value; - - list_for_each_entry(dt, &ddebug_tables, link) { - if (first_table) - table_hash_value = dt->ddebugs->primary_hash; - else - table_hash_value = dt->ddebugs->secondary_hash; - if (dt->num_enabled && (hash == table_hash_value)) - return 0; - } - return 1; -} - /* * Search the tables for _ddebug's which match the given * `query' and apply the `flags' and `mask' to them. Tells @@ -170,17 +142,9 @@ static void ddebug_change(const struct ddebug_query *query, dt->num_enabled++; dp->flags = newflags; if (newflags) { - dynamic_debug_enabled |= - (1LL << dp->primary_hash); - dynamic_debug_enabled2 |= - (1LL << dp->secondary_hash); + enable_jump_label(&dp->enabled); } else { - if (disabled_hash(dp->primary_hash, true)) - dynamic_debug_enabled &= - ~(1LL << dp->primary_hash); - if (disabled_hash(dp->secondary_hash, false)) - dynamic_debug_enabled2 &= - ~(1LL << dp->secondary_hash); + disable_jump_label(&dp->enabled); } if (verbose) printk(KERN_INFO diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 54fd1b70013..7bfcf1a09ac 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -101,14 +101,6 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" modname_flags = $(if $(filter 1,$(words $(modname))),\ -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") -#hash values -ifdef CONFIG_DYNAMIC_DEBUG -debug_flags = -D"DEBUG_HASH=$(shell ./scripts/basic/hash djb2 $(@D)$(modname))"\ - -D"DEBUG_HASH2=$(shell ./scripts/basic/hash r5 $(@D)$(modname))" -else -debug_flags = -endif - orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ $(ccflags-y) $(CFLAGS_$(basetarget).o) _c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) @@ -152,8 +144,7 @@ endif c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ $(__c_flags) $(modkern_cflags) \ - -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) \ - $(debug_flags) + -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ $(__a_flags) $(modkern_aflags) diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile index 09559951df1..4c324a1f1e0 100644 --- a/scripts/basic/Makefile +++ b/scripts/basic/Makefile @@ -9,7 +9,7 @@ # fixdep: Used to generate dependency information during build process # docproc: Used in Documentation/DocBook -hostprogs-y := fixdep docproc hash +hostprogs-y := fixdep docproc always := $(hostprogs-y) # fixdep is needed to compile other host programs diff --git a/scripts/basic/hash.c b/scripts/basic/hash.c deleted file mode 100644 index 2ef5d3f666b..00000000000 --- a/scripts/basic/hash.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2008 Red Hat, Inc., Jason Baron - * - */ - -#include -#include -#include - -#define DYNAMIC_DEBUG_HASH_BITS 6 - -static const char *program; - -static void usage(void) -{ - printf("Usage: %s \n", program); - exit(1); -} - -/* djb2 hashing algorithm by Dan Bernstein. From: - * http://www.cse.yorku.ca/~oz/hash.html - */ - -static unsigned int djb2_hash(char *str) -{ - unsigned long hash = 5381; - int c; - - c = *str; - while (c) { - hash = ((hash << 5) + hash) + c; - c = *++str; - } - return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1)); -} - -static unsigned int r5_hash(char *str) -{ - unsigned long hash = 0; - int c; - - c = *str; - while (c) { - hash = (hash + (c << 4) + (c >> 4)) * 11; - c = *++str; - } - return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1)); -} - -int main(int argc, char *argv[]) -{ - program = argv[0]; - - if (argc != 3) - usage(); - if (!strcmp(argv[1], "djb2")) - printf("%d\n", djb2_hash(argv[2])); - else if (!strcmp(argv[1], "r5")) - printf("%d\n", r5_hash(argv[2])); - else - usage(); - exit(0); -} - -- cgit v1.2.3-70-g09d2 From d6dad199a10423ce37b8bfec1f055c380dc4a3d5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 24 Sep 2010 09:12:25 +0200 Subject: jump label: Fix GCC feature check when distcc is used The following build bug occurs on distcc builds: CC arch/x86/kernel/asm-offsets.s In file included from include/linux/module.h:24, from include/linux/crypto.h:22, from arch/x86/kernel/asm-offsets_64.c:9, from arch/x86/kernel/asm-offsets.c:5: include/trace/events/module.h: In function 'trace_module_load': include/trace/events/module.h:18: error: expected '(' before 'goto' include/trace/events/module.h:18: error: expected identifier or '*' before '(' token It triggers because distcc is invoked by turning $CC into "distcc gcc", but gcc-goto.sh check script was using $1 not $@ to expand parameters. Cc: Jason Baron Cc: Steven Rostedt LKML-Reference: <20100923034910.867858597@goodmis.org> Signed-off-by: Ingo Molnar --- scripts/gcc-goto.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/gcc-goto.sh b/scripts/gcc-goto.sh index 8e82424be7a..520d16b1ffa 100644 --- a/scripts/gcc-goto.sh +++ b/scripts/gcc-goto.sh @@ -2,4 +2,4 @@ # Test for gcc 'asm goto' suport # Copyright (C) 2010, Jason Baron -echo "int main(void) { entry: asm goto (\"\"::::entry); return 0; }" | $1 -x c - -c -o /dev/null >/dev/null 2>&1 && echo "y" +echo "int main(void) { entry: asm goto (\"\"::::entry); return 0; }" | $@ -x c - -c -o /dev/null >/dev/null 2>&1 && echo "y" -- cgit v1.2.3-70-g09d2 From ef894870c6c38580e540c29cfb22a827d54a950a Mon Sep 17 00:00:00 2001 From: Jean Sacren Date: Fri, 10 Sep 2010 23:13:33 -0600 Subject: scripts/kallsyms: Enable error messages while hush up unnecessary warnings As no error was handled, we wouldn't be able to know when an error does occur. The fix preserves error messages while it doesn't let unnecessary compiling warnings show up. Signed-off-by: Jean Sacren Signed-off-by: Michal Marek --- scripts/kallsyms.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c index e3902fb39af..60dd3eb9366 100644 --- a/scripts/kallsyms.c +++ b/scripts/kallsyms.c @@ -107,12 +107,8 @@ static int read_symbol(FILE *in, struct sym_entry *s) rc = fscanf(in, "%llx %c %499s\n", &s->addr, &stype, str); if (rc != 3) { - if (rc != EOF) { - /* skip line. sym is used as dummy to - * shut of "warn_unused_result" warning. - */ - sym = fgets(str, 500, in); - } + if (rc != EOF && fgets(str, 500, in) == NULL) + fprintf(stderr, "Read error or end of file.\n"); return -1; } -- cgit v1.2.3-70-g09d2 From 8bea7548ee0223175bea5fddcc54af93bd252d9b Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Fri, 1 Oct 2010 04:23:17 +0900 Subject: kconfig: Don't go out from read config loop when you read new symbol commit 8baefd30b5b0101aa07aa75da44a9eee881eed28 of linux-next replaced a `switch()' statement with some `if()' statements, but left `break's in the `switch()' statement untouched. This cause read config loop to exit and so "make oldconfig" is not much usable (see below). > $ make oldconfig > > scripts/kconfig/conf --oldconfig Kconfig > # > # using defaults found in /boot/config-2.6.34-ccs-r1 > # > * > * Restart config... > * > * > * General setup > * > Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW) (I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But that's not read here.) This patch should fix this problem. Signed-off-by: Naohiro Aota Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index f7d89d7065b..35c08ecaad1 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -234,7 +234,7 @@ load: sym = sym_find(line + 2 + strlen(CONFIG_)); if (!sym) { sym_add_change_count(1); - break; + goto setsym; } } else { sym = sym_lookup(line + 2 + strlen(CONFIG_), 0); @@ -268,7 +268,7 @@ load: sym = sym_find(line + strlen(CONFIG_)); if (!sym) { sym_add_change_count(1); - break; + goto setsym; } } else { sym = sym_lookup(line + strlen(CONFIG_), 0); @@ -285,6 +285,7 @@ load: conf_warning("unexpected data"); continue; } +setsym: if (sym && sym_is_choice_value(sym)) { struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym)); switch (sym->def[def].tri) { -- cgit v1.2.3-70-g09d2 From a01ebe154c03f6ad58a1ec1bda616032bfe232e0 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Thu, 30 Sep 2010 22:17:48 +0200 Subject: kconfig: Propagate const Commit 2e7a091 made struct file->name a const char*, but forgot to constify all users of it. Reported-by: Stephen Rothwell Signed-off-by: Michal Marek --- scripts/kconfig/kxgettext.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/kxgettext.c b/scripts/kconfig/kxgettext.c index dcc3fcc0cc9..e9d8e791bf0 100644 --- a/scripts/kconfig/kxgettext.c +++ b/scripts/kconfig/kxgettext.c @@ -63,11 +63,11 @@ next: struct file_line { struct file_line *next; - char* file; - int lineno; + const char *file; + int lineno; }; -static struct file_line *file_line__new(char *file, int lineno) +static struct file_line *file_line__new(const char *file, int lineno) { struct file_line *self = malloc(sizeof(*self)); @@ -90,7 +90,8 @@ struct message { static struct message *message__list; -static struct message *message__new(const char *msg, char *option, char *file, int lineno) +static struct message *message__new(const char *msg, char *option, + const char *file, int lineno) { struct message *self = malloc(sizeof(*self)); @@ -130,7 +131,8 @@ static struct message *mesage__find(const char *msg) return m; } -static int message__add_file_line(struct message *self, char *file, int lineno) +static int message__add_file_line(struct message *self, const char *file, + int lineno) { int rc = -1; struct file_line *fl = file_line__new(file, lineno); @@ -145,7 +147,8 @@ out: return rc; } -static int message__add(const char *msg, char *option, char *file, int lineno) +static int message__add(const char *msg, char *option, const char *file, + int lineno) { int rc = 0; char bf[16384]; -- cgit v1.2.3-70-g09d2 From 19c29f326075e2c66e34d98f2a0cf22901b2d8e9 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Thu, 30 Sep 2010 22:21:12 +0200 Subject: kconfig: Fix realloc usage() Reported-by: Stephen Rothwell Signed-off-by: Michal Marek --- scripts/kconfig/symbol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index dc5dcf2189a..c0efe102d65 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -878,7 +878,7 @@ const char *sym_expand_string_value(const char *in) newlen = strlen(res) + strlen(symval) + strlen(src); if (newlen > reslen) { reslen = newlen; - realloc(res, reslen); + res = realloc(res, reslen); } strcat(res, symval); -- cgit v1.2.3-70-g09d2 From ff5ff6060bf880aac233e68dd666cbe9e39ec620 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sun, 26 Sep 2010 16:22:03 -0400 Subject: kconfig: delay symbol direct dependency initialization This fixes the use-after-free and associated crash in kconfig introduced in commit 246cf9c26bf11f2bffbecea6e5bd222eee7b1df8. Signed-off-by: Arnaud Lacombe Acked-by: Catalin Marinas Signed-off-by: Michal Marek --- scripts/kconfig/expr.h | 1 - scripts/kconfig/menu.c | 7 ++----- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 6ee2e4fb148..170459c224a 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -165,7 +165,6 @@ struct menu { struct symbol *sym; struct property *prompt; struct expr *dep; - struct expr *dir_dep; unsigned int flags; char *help; struct file *file; diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 4fb590247f3..edda8b49619 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -107,7 +107,6 @@ static struct expr *menu_check_dep(struct expr *e) void menu_add_dep(struct expr *dep) { current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep)); - current_entry->dir_dep = current_entry->dep; } void menu_set_type(int type) @@ -291,10 +290,6 @@ void menu_finalize(struct menu *parent) for (menu = parent->list; menu; menu = menu->next) menu_finalize(menu); } else if (sym) { - /* ignore inherited dependencies for dir_dep */ - sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep)); - sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr); - basedep = parent->prompt ? parent->prompt->visible.expr : NULL; basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no); basedep = expr_eliminate_dups(expr_transform(basedep)); @@ -325,6 +320,8 @@ void menu_finalize(struct menu *parent) parent->next = last_menu->next; last_menu->next = NULL; } + + sym->dir_dep.expr = parent->dep; } for (menu = parent->list; menu; menu = menu->next) { if (sym && sym_is_choice(sym) && -- cgit v1.2.3-70-g09d2 From 1408b15b98635a13bad2e2a50b3c2ae2ccdf625b Mon Sep 17 00:00:00 2001 From: Will Newton Date: Wed, 22 Sep 2010 15:59:13 +0100 Subject: kconfig: Use PATH_MAX instead of 128 for path buffer sizes. This prevents the buffers being overflowed when using a config file with a long name. PATH_MAX is used elsewhere in the same file, so use it here as well. Signed-off-by: Will Newton Acked-by: WANG Cong Signed-off-by: Michal Marek --- scripts/kconfig/confdata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 35c08ecaad1..96110ea41cf 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -535,7 +535,7 @@ int conf_write(const char *name) struct menu *menu; const char *basename; const char *str; - char dirname[128], tmpname[128], newname[128]; + char dirname[PATH_MAX+1], tmpname[PATH_MAX+1], newname[PATH_MAX+1]; enum symbol_type type; time_t now; int use_timestamp = 1; @@ -654,7 +654,7 @@ next: static int conf_split_config(void) { const char *name; - char path[128]; + char path[PATH_MAX+1]; char *s, *d, c; struct symbol *sym; struct stat sb; -- cgit v1.2.3-70-g09d2 From 71ebc01d3ad4fa3f20e86603bc31ff2cbc535d95 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Fri, 8 Oct 2010 16:40:27 +0200 Subject: kconfig: Temporarily disable dependency warnings After fixing a use-after-free bug in kconfig, a 'make defconfig' or 'make allmodconfig' fills the screen with warnings that were not detected before. Given that we are close to the release now, disable the warnings temporarily and deal with them after 2.6.36. Signed-off-by: Michal Marek --- scripts/kconfig/symbol.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 943712ca6c0..1f8b305449d 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -350,6 +350,7 @@ void sym_calc_value(struct symbol *sym) } } calc_newval: +#if 0 if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) { fprintf(stderr, "warning: ("); expr_fprint(sym->rev_dep.expr, stderr); @@ -358,6 +359,7 @@ void sym_calc_value(struct symbol *sym) expr_fprint(sym->dir_dep.expr, stderr); fprintf(stderr, ")\n"); } +#endif newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri); } if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN) -- cgit v1.2.3-70-g09d2 From e9203c988234aa512bd45ca32b52e21c7bbfc414 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Wed, 1 Sep 2010 11:21:30 -0400 Subject: kbuild: fix oldnoconfig to do the right thing Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on if (input_mode == nonint_oldconfig || input_mode == oldnoconfig) { if (input_mode == nonint_oldconfig && sym->name && !sym_is_choice_value(sym)) { to avoid oldnoconfig chugging through the else stanza. Fix that to restore expected behaviour (which I've confirmed in the Fedora kernel build that the configs end up looking the same.) Signed-off-by: Kyle McMartin Acked-by: Sam Ravnborg Signed-off-by: Michal Marek --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 5b7c86ea43a..7ef429cd5cb 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -427,7 +427,7 @@ static void check_conf(struct menu *menu) if (sym->name && !sym_is_choice_value(sym)) { printf("CONFIG_%s\n", sym->name); } - } else { + } else if (input_mode != oldnoconfig) { if (!conf_cnt++) printf(_("*\n* Restart config...\n*\n")); rootEntry = menu_get_parent_menu(menu); -- cgit v1.2.3-70-g09d2 From b1f7d6e1909c72338aa93a113d5844767434dacb Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 12 Oct 2010 15:12:23 +0200 Subject: Revert "kconfig: Temporarily disable dependency warnings" This reverts commit 71ebc01, which was a 2.6.36-only stopgap solution. Signed-off-by: Michal Marek --- scripts/kconfig/symbol.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index cb005684197..c0efe102d65 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -350,7 +350,6 @@ void sym_calc_value(struct symbol *sym) } } calc_newval: -#if 0 if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) { fprintf(stderr, "warning: ("); expr_fprint(sym->rev_dep.expr, stderr); @@ -359,7 +358,6 @@ void sym_calc_value(struct symbol *sym) expr_fprint(sym->dir_dep.expr, stderr); fprintf(stderr, ")\n"); } -#endif newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri); } if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN) -- cgit v1.2.3-70-g09d2 From 3c908417677f890265ff9d5efd372207cf75fd45 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Fri, 8 Oct 2010 21:27:38 +0200 Subject: Coccinelle: Improve user information with a new kind of comment Improve user information with a new kind of comment about semantic patch output. Fix spelling. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccicheck | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/coccicheck b/scripts/coccicheck index b8bcf1f7bed..ef78c875a0e 100755 --- a/scripts/coccicheck +++ b/scripts/coccicheck @@ -25,7 +25,7 @@ fi if [ "$MODE" = "" ] ; then if [ "$ONLINE" = "0" ] ; then - echo 'You have not explicitly specify the mode to use. Fallback to "report".' + echo 'You have not explicitly specified the mode to use. Fallback to "report".' echo 'You can specify the mode with "make coccicheck MODE="' echo 'Available modes are: report, patch, context, org' fi @@ -52,10 +52,12 @@ coccinelle () { FILE=`echo $COCCI | sed "s|$srctree/||"` - echo "Processing `basename $COCCI` with option(s) \"$OPT\"" + echo "Processing `basename $COCCI`" + echo "with option(s) \"$OPT\"" + echo '' echo 'Message example to submit a patch:' - sed -e '/\/\/\//!d' -e 's|^///||' $COCCI + sed -ne 's|^///||p' $COCCI echo ' The semantic patch that makes this change is available' echo " in $FILE." @@ -64,6 +66,12 @@ coccinelle () { echo ' http://coccinelle.lip6.fr/' echo '' + if [ "`sed -ne 's|^//#||p' $COCCI`" ] ; then + echo 'Semantic patch information:' + sed -ne 's|^//#||p' $COCCI + echo '' + fi + $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT -dir $srctree || exit 1 else $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 -- cgit v1.2.3-70-g09d2 From e90f6590219a0082618b9b6828458b1c74f37cc0 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Fri, 8 Oct 2010 21:27:39 +0200 Subject: Coccinelle: Use new comment format to explain kfree.cocci Use new comment format to separate proposed commit message and information about generated false positives Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccinelle/free/kfree.cocci | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/coccinelle/free/kfree.cocci b/scripts/coccinelle/free/kfree.cocci index c13a5395707..f9f79d9245e 100644 --- a/scripts/coccinelle/free/kfree.cocci +++ b/scripts/coccinelle/free/kfree.cocci @@ -1,7 +1,8 @@ -/// Find a use after free. Values of variables may imply that some -/// execution paths are not possible, resulting in false positives. -/// Another source of false positives are macros such as -/// SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument +/// Find a use after free. +//# Values of variables may imply that some +//# execution paths are not possible, resulting in false positives. +//# Another source of false positives are macros such as +//# SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument /// // Confidence: Moderate // Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. -- cgit v1.2.3-70-g09d2 From 2c1160c87465ee2d61eee14596e5376d2ff74f31 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Fri, 8 Oct 2010 21:27:40 +0200 Subject: Coccinelle: Add a new mode named 'chain' spatch now returns -1 when a virtual rule (given with -D on the command line) is not defined in the semantic patch. Using this spatch feature, coccicheck is now tries several modes by default, in the order: patch, report, context, org Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccicheck | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'scripts') diff --git a/scripts/coccicheck b/scripts/coccicheck index ef78c875a0e..c7beb63de2e 100755 --- a/scripts/coccicheck +++ b/scripts/coccicheck @@ -16,6 +16,7 @@ if [ "$C" = "1" -o "$C" = "2" ]; then else ONLINE=0 FLAGS="-very_quiet" + OPTIONS="-dir $srctree" fi if [ ! -x "$SPATCH" ]; then @@ -25,11 +26,11 @@ fi if [ "$MODE" = "" ] ; then if [ "$ONLINE" = "0" ] ; then - echo 'You have not explicitly specified the mode to use. Fallback to "report".' + echo 'You have not explicitly specified the mode to use. Using default "chain" mode.' + echo 'All available modes will be tried (in that order): patch, report, context, org' echo 'You can specify the mode with "make coccicheck MODE="' - echo 'Available modes are: report, patch, context, org' fi - MODE="report" + MODE="chain" fi if [ "$ONLINE" = "0" ] ; then @@ -71,10 +72,15 @@ coccinelle () { sed -ne 's|^//#||p' $COCCI echo '' fi + fi - $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT -dir $srctree || exit 1 + if [ "$MODE" = "chain" ] ; then + $SPATCH -D patch $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ + $SPATCH -D report $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ + $SPATCH -D context $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ + $SPATCH -D org $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 else - $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 + $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 fi } -- cgit v1.2.3-70-g09d2 From 03ee0c42a77fbf60bfa6b0eacaff30ae4e19fce8 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Fri, 8 Oct 2010 21:27:41 +0200 Subject: Coccinelle: Use the -no_show_diff option for org and report mode This allows to write the semantic patches with code sharing for the matching parts. Signed-off-by: Nicolas Palix Signed-off-by: Julia Lawall Signed-off-by: Michal Marek --- scripts/coccicheck | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/coccicheck b/scripts/coccicheck index c7beb63de2e..7529af15672 100755 --- a/scripts/coccicheck +++ b/scripts/coccicheck @@ -31,6 +31,8 @@ if [ "$MODE" = "" ] ; then echo 'You can specify the mode with "make coccicheck MODE="' fi MODE="chain" +elif [ "$MODE" = "report" -o "$MODE" = "org" ] ; then + FLAGS="$FLAGS -no_show_diff" fi if [ "$ONLINE" = "0" ] ; then @@ -75,10 +77,10 @@ coccinelle () { fi if [ "$MODE" = "chain" ] ; then - $SPATCH -D patch $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ - $SPATCH -D report $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ - $SPATCH -D context $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ - $SPATCH -D org $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 + $SPATCH -D patch $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ + $SPATCH -D report $FLAGS -sp_file $COCCI $OPT $OPTIONS -no_show_diff || \ + $SPATCH -D context $FLAGS -sp_file $COCCI $OPT $OPTIONS || \ + $SPATCH -D org $FLAGS -sp_file $COCCI $OPT $OPTIONS -no_show_diff || exit 1 else $SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1 fi -- cgit v1.2.3-70-g09d2 From c2d5a7300da667d090c8fe79f05404c9fb205b12 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Wed, 13 Oct 2010 10:39:45 -0700 Subject: scripts/package: don't break if %{_smp_mflags} isn't set Same fix as in 13797b77d419fc1b16eebf2993bf7b5cea65f0bf is needed for the "new" line invoking _smp_mflags for modules_install. Without the fix, `make binrpm-pkg` fails with: + make '%{_smp_mflags}' KBUILD_SRC= modules_install make[2]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. make[2]: *** No rule to make target `%{_smp_mflags}'. Stop. error: Bad exit status from /var/tmp/rpm-tmp.8S9B9e (%install) Signed-off-by: Nishanth Aravamudan Signed-off-by: Michal Marek --- scripts/package/mkspec | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/package/mkspec b/scripts/package/mkspec index 16ae0dd746e..186344266c3 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -70,7 +70,7 @@ echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib/modules' echo 'mkdir -p $RPM_BUILD_ROOT/lib/firmware' echo "%endif" -echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} KBUILD_SRC= modules_install' +echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{?_smp_mflags} KBUILD_SRC= modules_install' echo "%ifarch ia64" echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE" echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/" -- cgit v1.2.3-70-g09d2 From 81d3858d3131a589cade0d8b57f95cc1fc699b89 Mon Sep 17 00:00:00 2001 From: John Reiser Date: Wed, 13 Oct 2010 15:12:54 -0400 Subject: ftrace: Add C version of recordmcount compile time code Currently, the mcount callers are found with a perl script that does an objdump on every file in the kernel. This is a C version of that same code which should increase the performance time of compiling the kernel with dynamic ftrace enabled. Signed-off-by: John Reiser [ Updated the code to include .text.unlikely section as well as changing the format to follow Linux coding style. ] Signed-off-by: Steven Rostedt --- scripts/recordmcount.c | 885 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 885 insertions(+) create mode 100644 scripts/recordmcount.c (limited to 'scripts') diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c new file mode 100644 index 00000000000..34f32be1709 --- /dev/null +++ b/scripts/recordmcount.c @@ -0,0 +1,885 @@ +/* + * recordmcount.c: construct a table of the locations of calls to 'mcount' + * so that ftrace can find them quickly. + * Copyright 2009 John F. Reiser . All rights reserved. + * Licensed under the GNU General Public License, version 2 (GPLv2). + * + * Restructured to fit Linux format, as well as other updates: + * Copyright 2010 Steven Rostedt , Red Hat Inc. + */ + +/* + * Strategy: alter the .o file in-place. + * + * Append a new STRTAB that has the new section names, followed by a new array + * ElfXX_Shdr[] that has the new section headers, followed by the section + * contents for __mcount_loc and its relocations. The old shstrtab strings, + * and the old ElfXX_Shdr[] array, remain as "garbage" (commonly, a couple + * kilobytes.) Subsequent processing by /bin/ld (or the kernel module loader) + * will ignore the garbage regions, because they are not designated by the + * new .e_shoff nor the new ElfXX_Shdr[]. [In order to remove the garbage, + * then use "ld -r" to create a new file that omits the garbage.] + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int fd_map; /* File descriptor for file being modified. */ +static int mmap_failed; /* Boolean flag. */ +static void *ehdr_curr; /* current ElfXX_Ehdr * for resource cleanup */ +static char gpfx; /* prefix for global symbol name (sometimes '_') */ +static struct stat sb; /* Remember .st_size, etc. */ +static jmp_buf jmpenv; /* setjmp/longjmp per-file error escape */ + +/* setjmp() return values */ +enum { + SJ_SETJMP = 0, /* hardwired first return */ + SJ_FAIL, + SJ_SUCCEED +}; + +/* Per-file resource cleanup when multiple files. */ +static void +cleanup(void) +{ + if (!mmap_failed) + munmap(ehdr_curr, sb.st_size); + else + free(ehdr_curr); + close(fd_map); +} + +static void __attribute__((noreturn)) +fail_file(void) +{ + cleanup(); + longjmp(jmpenv, SJ_FAIL); +} + +static void __attribute__((noreturn)) +succeed_file(void) +{ + cleanup(); + longjmp(jmpenv, SJ_SUCCEED); +} + +/* ulseek, uread, ...: Check return value for errors. */ + +static off_t +ulseek(int const fd, off_t const offset, int const whence) +{ + off_t const w = lseek(fd, offset, whence); + if ((off_t)-1 == w) { + perror("lseek"); + fail_file(); + } + return w; +} + +static size_t +uread(int const fd, void *const buf, size_t const count) +{ + size_t const n = read(fd, buf, count); + if (n != count) { + perror("read"); + fail_file(); + } + return n; +} + +static size_t +uwrite(int const fd, void const *const buf, size_t const count) +{ + size_t const n = write(fd, buf, count); + if (n != count) { + perror("write"); + fail_file(); + } + return n; +} + +static void * +umalloc(size_t size) +{ + void *const addr = malloc(size); + if (0 == addr) { + fprintf(stderr, "malloc failed: %zu bytes\n", size); + fail_file(); + } + return addr; +} + +/* + * Get the whole file as a programming convenience in order to avoid + * malloc+lseek+read+free of many pieces. If successful, then mmap + * avoids copying unused pieces; else just read the whole file. + * Open for both read and write; new info will be appended to the file. + * Use MAP_PRIVATE so that a few changes to the in-memory ElfXX_Ehdr + * do not propagate to the file until an explicit overwrite at the last. + * This preserves most aspects of consistency (all except .st_size) + * for simultaneous readers of the file while we are appending to it. + * However, multiple writers still are bad. We choose not to use + * locking because it is expensive and the use case of kernel build + * makes multiple writers unlikely. + */ +static void *mmap_file(char const *fname) +{ + void *addr; + + fd_map = open(fname, O_RDWR); + if (0 > fd_map || 0 > fstat(fd_map, &sb)) { + perror(fname); + fail_file(); + } + if (!S_ISREG(sb.st_mode)) { + fprintf(stderr, "not a regular file: %s\n", fname); + fail_file(); + } + addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE, + fd_map, 0); + mmap_failed = 0; + if (MAP_FAILED == addr) { + mmap_failed = 1; + addr = umalloc(sb.st_size); + uread(fd_map, addr, sb.st_size); + } + return addr; +} + +/* w8rev, w8nat, ...: Handle endianness. */ + +static uint64_t w8rev(uint64_t const x) +{ + return ((0xff & (x >> (0 * 8))) << (7 * 8)) + | ((0xff & (x >> (1 * 8))) << (6 * 8)) + | ((0xff & (x >> (2 * 8))) << (5 * 8)) + | ((0xff & (x >> (3 * 8))) << (4 * 8)) + | ((0xff & (x >> (4 * 8))) << (3 * 8)) + | ((0xff & (x >> (5 * 8))) << (2 * 8)) + | ((0xff & (x >> (6 * 8))) << (1 * 8)) + | ((0xff & (x >> (7 * 8))) << (0 * 8)); +} + +static uint32_t w4rev(uint32_t const x) +{ + return ((0xff & (x >> (0 * 8))) << (3 * 8)) + | ((0xff & (x >> (1 * 8))) << (2 * 8)) + | ((0xff & (x >> (2 * 8))) << (1 * 8)) + | ((0xff & (x >> (3 * 8))) << (0 * 8)); +} + +static uint32_t w2rev(uint16_t const x) +{ + return ((0xff & (x >> (0 * 8))) << (1 * 8)) + | ((0xff & (x >> (1 * 8))) << (0 * 8)); +} + +static uint64_t w8nat(uint64_t const x) +{ + return x; +} + +static uint32_t w4nat(uint32_t const x) +{ + return x; +} + +static uint32_t w2nat(uint16_t const x) +{ + return x; +} + +static uint64_t (*w8)(uint64_t); +static uint32_t (*w)(uint32_t); +static uint32_t (*w2)(uint16_t); + +/* Names of the sections that could contain calls to mcount. */ +static int +is_mcounted_section_name(char const *const txtname) +{ + return 0 == strcmp(".text", txtname) || + 0 == strcmp(".sched.text", txtname) || + 0 == strcmp(".spinlock.text", txtname) || + 0 == strcmp(".irqentry.text", txtname) || + 0 == strcmp(".text.unlikely", txtname); +} + +/* Append the new shstrtab, Elf32_Shdr[], __mcount_loc and its relocations. */ +static void append32(Elf32_Ehdr *const ehdr, + Elf32_Shdr *const shstr, + uint32_t const *const mloc0, + uint32_t const *const mlocp, + Elf32_Rel const *const mrel0, + Elf32_Rel const *const mrelp, + unsigned int const rel_entsize, + unsigned int const symsec_sh_link) +{ + /* Begin constructing output file */ + Elf32_Shdr mcsec; + char const *mc_name = (sizeof(Elf32_Rela) == rel_entsize) + ? ".rela__mcount_loc" + : ".rel__mcount_loc"; + unsigned const old_shnum = w2(ehdr->e_shnum); + uint32_t const old_shoff = w(ehdr->e_shoff); + uint32_t const old_shstr_sh_size = w(shstr->sh_size); + uint32_t const old_shstr_sh_offset = w(shstr->sh_offset); + uint32_t t = 1 + strlen(mc_name) + w(shstr->sh_size); + uint32_t new_e_shoff; + + shstr->sh_size = w(t); + shstr->sh_offset = w(sb.st_size); + t += sb.st_size; + t += (3u & -t); /* 4-byte align */ + new_e_shoff = t; + + /* body for new shstrtab */ + ulseek(fd_map, sb.st_size, SEEK_SET); + uwrite(fd_map, old_shstr_sh_offset + (void *)ehdr, old_shstr_sh_size); + uwrite(fd_map, mc_name, 1 + strlen(mc_name)); + + /* old(modified) Elf32_Shdr table, 4-byte aligned */ + ulseek(fd_map, t, SEEK_SET); + t += sizeof(Elf32_Shdr) * old_shnum; + uwrite(fd_map, old_shoff + (void *)ehdr, + sizeof(Elf32_Shdr) * old_shnum); + + /* new sections __mcount_loc and .rel__mcount_loc */ + t += 2*sizeof(mcsec); + mcsec.sh_name = w((sizeof(Elf32_Rela) == rel_entsize) + strlen(".rel") + + old_shstr_sh_size); + mcsec.sh_type = w(SHT_PROGBITS); + mcsec.sh_flags = w(SHF_ALLOC); + mcsec.sh_addr = 0; + mcsec.sh_offset = w(t); + mcsec.sh_size = w((void *)mlocp - (void *)mloc0); + mcsec.sh_link = 0; + mcsec.sh_info = 0; + mcsec.sh_addralign = w(4); + mcsec.sh_entsize = w(4); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + mcsec.sh_name = w(old_shstr_sh_size); + mcsec.sh_type = (sizeof(Elf32_Rela) == rel_entsize) + ? w(SHT_RELA) + : w(SHT_REL); + mcsec.sh_flags = 0; + mcsec.sh_addr = 0; + mcsec.sh_offset = w((void *)mlocp - (void *)mloc0 + t); + mcsec.sh_size = w((void *)mrelp - (void *)mrel0); + mcsec.sh_link = w(symsec_sh_link); + mcsec.sh_info = w(old_shnum); + mcsec.sh_addralign = w(4); + mcsec.sh_entsize = w(rel_entsize); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + uwrite(fd_map, mloc0, (void *)mlocp - (void *)mloc0); + uwrite(fd_map, mrel0, (void *)mrelp - (void *)mrel0); + + ehdr->e_shoff = w(new_e_shoff); + ehdr->e_shnum = w2(2 + w2(ehdr->e_shnum)); /* {.rel,}__mcount_loc */ + ulseek(fd_map, 0, SEEK_SET); + uwrite(fd_map, ehdr, sizeof(*ehdr)); +} + +/* + * append64 and append32 (and other analogous pairs) could be templated + * using C++, but the complexity is high. (For an example, look at p_elf.h + * in the source for UPX, http://upx.sourceforge.net) So: remember to make + * the corresponding change in the routine for the other size. + */ +static void append64(Elf64_Ehdr *const ehdr, + Elf64_Shdr *const shstr, + uint64_t const *const mloc0, + uint64_t const *const mlocp, + Elf64_Rel const *const mrel0, + Elf64_Rel const *const mrelp, + unsigned int const rel_entsize, + unsigned int const symsec_sh_link) +{ + /* Begin constructing output file */ + Elf64_Shdr mcsec; + char const *mc_name = (sizeof(Elf64_Rela) == rel_entsize) + ? ".rela__mcount_loc" + : ".rel__mcount_loc"; + unsigned const old_shnum = w2(ehdr->e_shnum); + uint64_t const old_shoff = w8(ehdr->e_shoff); + uint64_t const old_shstr_sh_size = w8(shstr->sh_size); + uint64_t const old_shstr_sh_offset = w8(shstr->sh_offset); + uint64_t t = 1 + strlen(mc_name) + w8(shstr->sh_size); + uint64_t new_e_shoff; + + shstr->sh_size = w8(t); + shstr->sh_offset = w8(sb.st_size); + t += sb.st_size; + t += (7u & -t); /* 8-byte align */ + new_e_shoff = t; + + /* body for new shstrtab */ + ulseek(fd_map, sb.st_size, SEEK_SET); + uwrite(fd_map, old_shstr_sh_offset + (void *)ehdr, old_shstr_sh_size); + uwrite(fd_map, mc_name, 1 + strlen(mc_name)); + + /* old(modified) Elf64_Shdr table, 8-byte aligned */ + ulseek(fd_map, t, SEEK_SET); + t += sizeof(Elf64_Shdr) * old_shnum; + uwrite(fd_map, old_shoff + (void *)ehdr, + sizeof(Elf64_Shdr) * old_shnum); + + /* new sections __mcount_loc and .rel__mcount_loc */ + t += 2*sizeof(mcsec); + mcsec.sh_name = w((sizeof(Elf64_Rela) == rel_entsize) + strlen(".rel") + + old_shstr_sh_size); + mcsec.sh_type = w(SHT_PROGBITS); + mcsec.sh_flags = w8(SHF_ALLOC); + mcsec.sh_addr = 0; + mcsec.sh_offset = w8(t); + mcsec.sh_size = w8((void *)mlocp - (void *)mloc0); + mcsec.sh_link = 0; + mcsec.sh_info = 0; + mcsec.sh_addralign = w8(8); + mcsec.sh_entsize = w8(8); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + mcsec.sh_name = w(old_shstr_sh_size); + mcsec.sh_type = (sizeof(Elf64_Rela) == rel_entsize) + ? w(SHT_RELA) + : w(SHT_REL); + mcsec.sh_flags = 0; + mcsec.sh_addr = 0; + mcsec.sh_offset = w8((void *)mlocp - (void *)mloc0 + t); + mcsec.sh_size = w8((void *)mrelp - (void *)mrel0); + mcsec.sh_link = w(symsec_sh_link); + mcsec.sh_info = w(old_shnum); + mcsec.sh_addralign = w8(8); + mcsec.sh_entsize = w8(rel_entsize); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + uwrite(fd_map, mloc0, (void *)mlocp - (void *)mloc0); + uwrite(fd_map, mrel0, (void *)mrelp - (void *)mrel0); + + ehdr->e_shoff = w8(new_e_shoff); + ehdr->e_shnum = w2(2 + w2(ehdr->e_shnum)); /* {.rel,}__mcount_loc */ + ulseek(fd_map, 0, SEEK_SET); + uwrite(fd_map, ehdr, sizeof(*ehdr)); +} + +/* + * Look at the relocations in order to find the calls to mcount. + * Accumulate the section offsets that are found, and their relocation info, + * onto the end of the existing arrays. + */ +static uint32_t *sift32_rel_mcount(uint32_t *mlocp, + unsigned const offbase, + Elf32_Rel **const mrelpp, + Elf32_Shdr const *const relhdr, + Elf32_Ehdr const *const ehdr, + unsigned const recsym, + uint32_t const recval, + unsigned const reltype) +{ + uint32_t *const mloc0 = mlocp; + Elf32_Rel *mrelp = *mrelpp; + Elf32_Shdr *const shdr0 = (Elf32_Shdr *)(w(ehdr->e_shoff) + + (void *)ehdr); + unsigned const symsec_sh_link = w(relhdr->sh_link); + Elf32_Shdr const *const symsec = &shdr0[symsec_sh_link]; + Elf32_Sym const *const sym0 = (Elf32_Sym const *)(w(symsec->sh_offset) + + (void *)ehdr); + + Elf32_Shdr const *const strsec = &shdr0[w(symsec->sh_link)]; + char const *const str0 = (char const *)(w(strsec->sh_offset) + + (void *)ehdr); + + Elf32_Rel const *const rel0 = (Elf32_Rel const *)(w(relhdr->sh_offset) + + (void *)ehdr); + unsigned rel_entsize = w(relhdr->sh_entsize); + unsigned const nrel = w(relhdr->sh_size) / rel_entsize; + Elf32_Rel const *relp = rel0; + + unsigned mcountsym = 0; + unsigned t; + + for (t = nrel; t; --t) { + if (!mcountsym) { + Elf32_Sym const *const symp = + &sym0[ELF32_R_SYM(w(relp->r_info))]; + + if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), + &str0[w(symp->st_name)])) + mcountsym = ELF32_R_SYM(w(relp->r_info)); + } + if (mcountsym == ELF32_R_SYM(w(relp->r_info))) { + uint32_t const addend = w(w(relp->r_offset) - recval); + mrelp->r_offset = w(offbase + + ((void *)mlocp - (void *)mloc0)); + mrelp->r_info = w(ELF32_R_INFO(recsym, reltype)); + if (sizeof(Elf32_Rela) == rel_entsize) { + ((Elf32_Rela *)mrelp)->r_addend = addend; + *mlocp++ = 0; + } else + *mlocp++ = addend; + + mrelp = (Elf32_Rel *)(rel_entsize + (void *)mrelp); + } + relp = (Elf32_Rel const *)(rel_entsize + (void *)relp); + } + *mrelpp = mrelp; + return mlocp; +} + +static uint64_t *sift64_rel_mcount(uint64_t *mlocp, + unsigned const offbase, + Elf64_Rel **const mrelpp, + Elf64_Shdr const *const relhdr, + Elf64_Ehdr const *const ehdr, + unsigned const recsym, + uint64_t const recval, + unsigned const reltype) +{ + uint64_t *const mloc0 = mlocp; + Elf64_Rel *mrelp = *mrelpp; + Elf64_Shdr *const shdr0 = (Elf64_Shdr *)(w8(ehdr->e_shoff) + + (void *)ehdr); + unsigned const symsec_sh_link = w(relhdr->sh_link); + Elf64_Shdr const *const symsec = &shdr0[symsec_sh_link]; + Elf64_Sym const *const sym0 = (Elf64_Sym const *)(w8(symsec->sh_offset) + + (void *)ehdr); + + Elf64_Shdr const *const strsec = &shdr0[w(symsec->sh_link)]; + char const *const str0 = (char const *)(w8(strsec->sh_offset) + + (void *)ehdr); + + Elf64_Rel const *const rel0 = (Elf64_Rel const *)(w8(relhdr->sh_offset) + + (void *)ehdr); + unsigned rel_entsize = w8(relhdr->sh_entsize); + unsigned const nrel = w8(relhdr->sh_size) / rel_entsize; + Elf64_Rel const *relp = rel0; + + unsigned mcountsym = 0; + unsigned t; + + for (t = nrel; 0 != t; --t) { + if (!mcountsym) { + Elf64_Sym const *const symp = + &sym0[ELF64_R_SYM(w8(relp->r_info))]; + char const *symname = &str0[w(symp->st_name)]; + + if ('.' == symname[0]) + ++symname; /* ppc64 hack */ + if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), + symname)) + mcountsym = ELF64_R_SYM(w8(relp->r_info)); + } + + if (mcountsym == ELF64_R_SYM(w8(relp->r_info))) { + uint64_t const addend = w8(w8(relp->r_offset) - recval); + + mrelp->r_offset = w8(offbase + + ((void *)mlocp - (void *)mloc0)); + mrelp->r_info = w8(ELF64_R_INFO(recsym, reltype)); + if (sizeof(Elf64_Rela) == rel_entsize) { + ((Elf64_Rela *)mrelp)->r_addend = addend; + *mlocp++ = 0; + } else + *mlocp++ = addend; + + mrelp = (Elf64_Rel *)(rel_entsize + (void *)mrelp); + } + relp = (Elf64_Rel const *)(rel_entsize + (void *)relp); + } + *mrelpp = mrelp; + + return mlocp; +} + +/* + * Find a symbol in the given section, to be used as the base for relocating + * the table of offsets of calls to mcount. A local or global symbol suffices, + * but avoid a Weak symbol because it may be overridden; the change in value + * would invalidate the relocations of the offsets of the calls to mcount. + * Often the found symbol will be the unnamed local symbol generated by + * GNU 'as' for the start of each section. For example: + * Num: Value Size Type Bind Vis Ndx Name + * 2: 00000000 0 SECTION LOCAL DEFAULT 1 + */ +static unsigned find32_secsym_ndx(unsigned const txtndx, + char const *const txtname, + uint32_t *const recvalp, + Elf32_Shdr const *const symhdr, + Elf32_Ehdr const *const ehdr) +{ + Elf32_Sym const *const sym0 = (Elf32_Sym const *)(w(symhdr->sh_offset) + + (void *)ehdr); + unsigned const nsym = w(symhdr->sh_size) / w(symhdr->sh_entsize); + Elf32_Sym const *symp; + unsigned t; + + for (symp = sym0, t = nsym; t; --t, ++symp) { + unsigned int const st_bind = ELF32_ST_BIND(symp->st_info); + + if (txtndx == w2(symp->st_shndx) + /* avoid STB_WEAK */ + && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { + *recvalp = w(symp->st_value); + return symp - sym0; + } + } + fprintf(stderr, "Cannot find symbol for section %d: %s.\n", + txtndx, txtname); + fail_file(); +} + +static unsigned find64_secsym_ndx(unsigned const txtndx, + char const *const txtname, + uint64_t *const recvalp, + Elf64_Shdr const *const symhdr, + Elf64_Ehdr const *const ehdr) +{ + Elf64_Sym const *const sym0 = (Elf64_Sym const *)(w8(symhdr->sh_offset) + + (void *)ehdr); + unsigned const nsym = w8(symhdr->sh_size) / w8(symhdr->sh_entsize); + Elf64_Sym const *symp; + unsigned t; + + for (symp = sym0, t = nsym; t; --t, ++symp) { + unsigned int const st_bind = ELF64_ST_BIND(symp->st_info); + + if (txtndx == w2(symp->st_shndx) + /* avoid STB_WEAK */ + && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { + *recvalp = w8(symp->st_value); + return symp - sym0; + } + } + fprintf(stderr, "Cannot find symbol for section %d: %s.\n", + txtndx, txtname); + fail_file(); +} + +/* + * Evade ISO C restriction: no declaration after statement in + * has32_rel_mcount. + */ +static char const * +__has32_rel_mcount(Elf32_Shdr const *const relhdr, /* is SHT_REL or SHT_RELA */ + Elf32_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + /* .sh_info depends on .sh_type == SHT_REL[,A] */ + Elf32_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)]; + char const *const txtname = &shstrtab[w(txthdr->sh_name)]; + + if (0 == strcmp("__mcount_loc", txtname)) { + fprintf(stderr, "warning: __mcount_loc already exists: %s\n", + fname); + succeed_file(); + } + if (SHT_PROGBITS != w(txthdr->sh_type) || + !is_mcounted_section_name(txtname)) + return NULL; + return txtname; +} + +static char const *has32_rel_mcount(Elf32_Shdr const *const relhdr, + Elf32_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type)) + return NULL; + return __has32_rel_mcount(relhdr, shdr0, shstrtab, fname); +} + +static char const *__has64_rel_mcount(Elf64_Shdr const *const relhdr, + Elf64_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + /* .sh_info depends on .sh_type == SHT_REL[,A] */ + Elf64_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)]; + char const *const txtname = &shstrtab[w(txthdr->sh_name)]; + + if (0 == strcmp("__mcount_loc", txtname)) { + fprintf(stderr, "warning: __mcount_loc already exists: %s\n", + fname); + succeed_file(); + } + if (SHT_PROGBITS != w(txthdr->sh_type) || + !is_mcounted_section_name(txtname)) + return NULL; + return txtname; +} + +static char const *has64_rel_mcount(Elf64_Shdr const *const relhdr, + Elf64_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type)) + return NULL; + return __has64_rel_mcount(relhdr, shdr0, shstrtab, fname); +} + +static unsigned tot32_relsize(Elf32_Shdr const *const shdr0, + unsigned nhdr, + const char *const shstrtab, + const char *const fname) +{ + unsigned totrelsz = 0; + Elf32_Shdr const *shdrp = shdr0; + for (; 0 != nhdr; --nhdr, ++shdrp) { + if (has32_rel_mcount(shdrp, shdr0, shstrtab, fname)) + totrelsz += w(shdrp->sh_size); + } + return totrelsz; +} + +static unsigned tot64_relsize(Elf64_Shdr const *const shdr0, + unsigned nhdr, + const char *const shstrtab, + const char *const fname) +{ + unsigned totrelsz = 0; + Elf64_Shdr const *shdrp = shdr0; + + for (; nhdr; --nhdr, ++shdrp) { + if (has64_rel_mcount(shdrp, shdr0, shstrtab, fname)) + totrelsz += w8(shdrp->sh_size); + } + return totrelsz; +} + +/* Overall supervision for Elf32 ET_REL file. */ +static void +do32(Elf32_Ehdr *const ehdr, char const *const fname, unsigned const reltype) +{ + Elf32_Shdr *const shdr0 = (Elf32_Shdr *)(w(ehdr->e_shoff) + + (void *)ehdr); + unsigned const nhdr = w2(ehdr->e_shnum); + Elf32_Shdr *const shstr = &shdr0[w2(ehdr->e_shstrndx)]; + char const *const shstrtab = (char const *)(w(shstr->sh_offset) + + (void *)ehdr); + + Elf32_Shdr const *relhdr; + unsigned k; + + /* Upper bound on space: assume all relevant relocs are for mcount. */ + unsigned const totrelsz = tot32_relsize(shdr0, nhdr, shstrtab, fname); + Elf32_Rel *const mrel0 = umalloc(totrelsz); + Elf32_Rel * mrelp = mrel0; + + /* 2*sizeof(address) <= sizeof(Elf32_Rel) */ + uint32_t *const mloc0 = umalloc(totrelsz>>1); + uint32_t * mlocp = mloc0; + + unsigned rel_entsize = 0; + unsigned symsec_sh_link = 0; + + for (relhdr = shdr0, k = nhdr; k; --k, ++relhdr) { + char const *const txtname = has32_rel_mcount(relhdr, shdr0, + shstrtab, fname); + if (txtname) { + uint32_t recval = 0; + unsigned const recsym = find32_secsym_ndx( + w(relhdr->sh_info), txtname, &recval, + &shdr0[symsec_sh_link = w(relhdr->sh_link)], + ehdr); + + rel_entsize = w(relhdr->sh_entsize); + mlocp = sift32_rel_mcount(mlocp, + (void *)mlocp - (void *)mloc0, &mrelp, + relhdr, ehdr, recsym, recval, reltype); + } + } + if (mloc0 != mlocp) { + append32(ehdr, shstr, mloc0, mlocp, mrel0, mrelp, + rel_entsize, symsec_sh_link); + } + free(mrel0); + free(mloc0); +} + +static void +do64(Elf64_Ehdr *const ehdr, char const *const fname, unsigned const reltype) +{ + Elf64_Shdr *const shdr0 = (Elf64_Shdr *)(w8(ehdr->e_shoff) + + (void *)ehdr); + unsigned const nhdr = w2(ehdr->e_shnum); + Elf64_Shdr *const shstr = &shdr0[w2(ehdr->e_shstrndx)]; + char const *const shstrtab = (char const *)(w8(shstr->sh_offset) + + (void *)ehdr); + + Elf64_Shdr const *relhdr; + unsigned k; + + /* Upper bound on space: assume all relevant relocs are for mcount. */ + unsigned const totrelsz = tot64_relsize(shdr0, nhdr, shstrtab, fname); + Elf64_Rel *const mrel0 = umalloc(totrelsz); + Elf64_Rel * mrelp = mrel0; + + /* 2*sizeof(address) <= sizeof(Elf64_Rel) */ + uint64_t *const mloc0 = umalloc(totrelsz>>1); + uint64_t * mlocp = mloc0; + + unsigned rel_entsize = 0; + unsigned symsec_sh_link = 0; + + for ((relhdr = shdr0), k = nhdr; k; --k, ++relhdr) { + char const *const txtname = has64_rel_mcount(relhdr, shdr0, + shstrtab, fname); + if (txtname) { + uint64_t recval = 0; + unsigned const recsym = find64_secsym_ndx( + w(relhdr->sh_info), txtname, &recval, + &shdr0[symsec_sh_link = w(relhdr->sh_link)], + ehdr); + + rel_entsize = w8(relhdr->sh_entsize); + mlocp = sift64_rel_mcount(mlocp, + (void *)mlocp - (void *)mloc0, &mrelp, + relhdr, ehdr, recsym, recval, reltype); + } + } + if (mloc0 != mlocp) { + append64(ehdr, shstr, mloc0, mlocp, mrel0, mrelp, + rel_entsize, symsec_sh_link); + } + free(mrel0); + free(mloc0); +} + +static void +do_file(char const *const fname) +{ + Elf32_Ehdr *const ehdr = mmap_file(fname); + unsigned int reltype = 0; + + ehdr_curr = ehdr; + w = w4nat; + w2 = w2nat; + w8 = w8nat; + switch (ehdr->e_ident[EI_DATA]) { + static unsigned int const endian = 1; + default: { + fprintf(stderr, "unrecognized ELF data encoding %d: %s\n", + ehdr->e_ident[EI_DATA], fname); + fail_file(); + } break; + case ELFDATA2LSB: { + if (1 != *(unsigned char const *)&endian) { + /* main() is big endian, file.o is little endian. */ + w = w4rev; + w2 = w2rev; + w8 = w8rev; + } + } break; + case ELFDATA2MSB: { + if (0 != *(unsigned char const *)&endian) { + /* main() is little endian, file.o is big endian. */ + w = w4rev; + w2 = w2rev; + w8 = w8rev; + } + } break; + } /* end switch */ + if (0 != memcmp(ELFMAG, ehdr->e_ident, SELFMAG) + || ET_REL != w2(ehdr->e_type) + || EV_CURRENT != ehdr->e_ident[EI_VERSION]) { + fprintf(stderr, "unrecognized ET_REL file %s\n", fname); + fail_file(); + } + + gpfx = 0; + switch (w2(ehdr->e_machine)) { + default: { + fprintf(stderr, "unrecognized e_machine %d %s\n", + w2(ehdr->e_machine), fname); + fail_file(); + } break; + case EM_386: reltype = R_386_32; break; + case EM_ARM: reltype = R_ARM_ABS32; break; + case EM_IA_64: reltype = R_IA64_IMM64; gpfx = '_'; break; + case EM_PPC: reltype = R_PPC_ADDR32; gpfx = '_'; break; + case EM_PPC64: reltype = R_PPC64_ADDR64; gpfx = '_'; break; + case EM_S390: /* reltype: e_class */ gpfx = '_'; break; + case EM_SH: reltype = R_SH_DIR32; break; + case EM_SPARCV9: reltype = R_SPARC_64; gpfx = '_'; break; + case EM_X86_64: reltype = R_X86_64_64; break; + } /* end switch */ + + switch (ehdr->e_ident[EI_CLASS]) { + default: { + fprintf(stderr, "unrecognized ELF class %d %s\n", + ehdr->e_ident[EI_CLASS], fname); + fail_file(); + } break; + case ELFCLASS32: { + if (sizeof(Elf32_Ehdr) != w2(ehdr->e_ehsize) + || sizeof(Elf32_Shdr) != w2(ehdr->e_shentsize)) { + fprintf(stderr, + "unrecognized ET_REL file: %s\n", fname); + fail_file(); + } + if (EM_S390 == w2(ehdr->e_machine)) + reltype = R_390_32; + do32(ehdr, fname, reltype); + } break; + case ELFCLASS64: { + Elf64_Ehdr *const ghdr = (Elf64_Ehdr *)ehdr; + if (sizeof(Elf64_Ehdr) != w2(ghdr->e_ehsize) + || sizeof(Elf64_Shdr) != w2(ghdr->e_shentsize)) { + fprintf(stderr, + "unrecognized ET_REL file: %s\n", fname); + fail_file(); + } + if (EM_S390 == w2(ghdr->e_machine)) + reltype = R_390_64; + do64(ghdr, fname, reltype); + } break; + } /* end switch */ + + cleanup(); +} + +int +main(int argc, char const *argv[]) +{ + int n_error = 0; /* gcc-4.3.0 false positive complaint */ + if (argc <= 1) + fprintf(stderr, "usage: recordmcount file.o...\n"); + else /* Process each file in turn, allowing deep failure. */ + for (--argc, ++argv; 0 < argc; --argc, ++argv) { + int const sjval = setjmp(jmpenv); + switch (sjval) { + default: { + fprintf(stderr, "internal error: %s\n", argv[0]); + exit(1); + } break; + case SJ_SETJMP: { /* normal sequence */ + /* Avoid problems if early cleanup() */ + fd_map = -1; + ehdr_curr = NULL; + mmap_failed = 1; + do_file(argv[0]); + } break; + case SJ_FAIL: { /* error in do_file or below */ + ++n_error; + } break; + case SJ_SUCCEED: { /* premature success */ + /* do nothing */ + } break; + } /* end switch */ + } + return !!n_error; +} + + -- cgit v1.2.3-70-g09d2 From 72441cb1fd77d092f09ddfac748955703884c9a7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 13 Oct 2010 17:12:30 -0400 Subject: ftrace/x86: Add support for C version of recordmcount This patch adds the support for the C version of recordmcount and compile times show ~ 12% improvement. After verifying this works, other archs can add: HAVE_C_MCOUNT_RECORD in its Kconfig and it will use the C version of recordmcount instead of the perl version. Cc: Cc: Michal Marek Cc: linux-kbuild@vger.kernel.org Cc: John Reiser Signed-off-by: Steven Rostedt --- Makefile | 6 ++++++ arch/x86/Kconfig | 1 + kernel/trace/Kconfig | 5 +++++ scripts/Makefile | 1 + scripts/Makefile.build | 4 ++++ 5 files changed, 17 insertions(+) (limited to 'scripts') diff --git a/Makefile b/Makefile index 534c09c255d..0dd3a8d9313 100644 --- a/Makefile +++ b/Makefile @@ -568,6 +568,12 @@ endif ifdef CONFIG_FUNCTION_TRACER KBUILD_CFLAGS += -pg +ifdef CONFIG_DYNAMIC_FTRACE + ifdef CONFIG_HAVE_C_MCOUNT_RECORD + BUILD_C_RECORDMCOUNT := y + export BUILD_C_RECORDMCOUNT + endif +endif endif # We trigger additional mismatches with less inlining diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c14d8b4d2f7..788b50ef5fc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -33,6 +33,7 @@ config X86 select HAVE_KRETPROBES select HAVE_OPTPROBES select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_C_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 538501c6ea5..df00fbbaf60 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -49,6 +49,11 @@ config HAVE_SYSCALL_TRACEPOINTS help See Documentation/trace/ftrace-design.txt +config HAVE_C_MCOUNT_RECORD + bool + help + C version of recordmcount available? + config TRACER_MAX_TRACE bool diff --git a/scripts/Makefile b/scripts/Makefile index 842dbc2d5ae..2e088109fbd 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -11,6 +11,7 @@ hostprogs-$(CONFIG_KALLSYMS) += kallsyms hostprogs-$(CONFIG_LOGO) += pnmtologo hostprogs-$(CONFIG_VT) += conmakehash hostprogs-$(CONFIG_IKCONFIG) += bin2c +hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount always := $(hostprogs-y) $(hostprogs-m) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index a1a5cf95a68..4d03a7efc68 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -209,12 +209,16 @@ cmd_modversions = \ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD +ifdef BUILD_C_RECORDMCOUNT +cmd_record_mcount = $(srctree)/scripts/recordmcount "$(@)"; +else cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; endif +endif define rule_cc_o_c $(call echo-cmd,checksrc) $(cmd_checksrc) \ -- cgit v1.2.3-70-g09d2 From c28d5077f8d79bfce1e3f88db2e261cf2b6473dc Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 13 Oct 2010 19:06:14 -0400 Subject: ftrace: Remove duplicate code for 64 and 32 bit in recordmcount.c The elf reader for recordmcount.c had duplicate functions for both 32 bit and 64 bit elf handling. This was due to the need of using the 32 and 64 bit elf structures. This patch consolidates the two by using macros to define the 32 and 64 bit names in a recordmcount.h file, and then by just defining a RECORD_MCOUNT_64 macro and including recordmcount.h twice we create the funtions for both the 32 bit version as well as the 64 bit version using one code source. Cc: John Reiser Signed-off-by: Steven Rostedt --- scripts/recordmcount.c | 548 +------------------------------------------------ scripts/recordmcount.h | 366 +++++++++++++++++++++++++++++++++ 2 files changed, 370 insertions(+), 544 deletions(-) create mode 100644 scripts/recordmcount.h (limited to 'scripts') diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 34f32be1709..7f7f7180fe2 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -212,550 +212,10 @@ is_mcounted_section_name(char const *const txtname) 0 == strcmp(".text.unlikely", txtname); } -/* Append the new shstrtab, Elf32_Shdr[], __mcount_loc and its relocations. */ -static void append32(Elf32_Ehdr *const ehdr, - Elf32_Shdr *const shstr, - uint32_t const *const mloc0, - uint32_t const *const mlocp, - Elf32_Rel const *const mrel0, - Elf32_Rel const *const mrelp, - unsigned int const rel_entsize, - unsigned int const symsec_sh_link) -{ - /* Begin constructing output file */ - Elf32_Shdr mcsec; - char const *mc_name = (sizeof(Elf32_Rela) == rel_entsize) - ? ".rela__mcount_loc" - : ".rel__mcount_loc"; - unsigned const old_shnum = w2(ehdr->e_shnum); - uint32_t const old_shoff = w(ehdr->e_shoff); - uint32_t const old_shstr_sh_size = w(shstr->sh_size); - uint32_t const old_shstr_sh_offset = w(shstr->sh_offset); - uint32_t t = 1 + strlen(mc_name) + w(shstr->sh_size); - uint32_t new_e_shoff; - - shstr->sh_size = w(t); - shstr->sh_offset = w(sb.st_size); - t += sb.st_size; - t += (3u & -t); /* 4-byte align */ - new_e_shoff = t; - - /* body for new shstrtab */ - ulseek(fd_map, sb.st_size, SEEK_SET); - uwrite(fd_map, old_shstr_sh_offset + (void *)ehdr, old_shstr_sh_size); - uwrite(fd_map, mc_name, 1 + strlen(mc_name)); - - /* old(modified) Elf32_Shdr table, 4-byte aligned */ - ulseek(fd_map, t, SEEK_SET); - t += sizeof(Elf32_Shdr) * old_shnum; - uwrite(fd_map, old_shoff + (void *)ehdr, - sizeof(Elf32_Shdr) * old_shnum); - - /* new sections __mcount_loc and .rel__mcount_loc */ - t += 2*sizeof(mcsec); - mcsec.sh_name = w((sizeof(Elf32_Rela) == rel_entsize) + strlen(".rel") - + old_shstr_sh_size); - mcsec.sh_type = w(SHT_PROGBITS); - mcsec.sh_flags = w(SHF_ALLOC); - mcsec.sh_addr = 0; - mcsec.sh_offset = w(t); - mcsec.sh_size = w((void *)mlocp - (void *)mloc0); - mcsec.sh_link = 0; - mcsec.sh_info = 0; - mcsec.sh_addralign = w(4); - mcsec.sh_entsize = w(4); - uwrite(fd_map, &mcsec, sizeof(mcsec)); - - mcsec.sh_name = w(old_shstr_sh_size); - mcsec.sh_type = (sizeof(Elf32_Rela) == rel_entsize) - ? w(SHT_RELA) - : w(SHT_REL); - mcsec.sh_flags = 0; - mcsec.sh_addr = 0; - mcsec.sh_offset = w((void *)mlocp - (void *)mloc0 + t); - mcsec.sh_size = w((void *)mrelp - (void *)mrel0); - mcsec.sh_link = w(symsec_sh_link); - mcsec.sh_info = w(old_shnum); - mcsec.sh_addralign = w(4); - mcsec.sh_entsize = w(rel_entsize); - uwrite(fd_map, &mcsec, sizeof(mcsec)); - - uwrite(fd_map, mloc0, (void *)mlocp - (void *)mloc0); - uwrite(fd_map, mrel0, (void *)mrelp - (void *)mrel0); - - ehdr->e_shoff = w(new_e_shoff); - ehdr->e_shnum = w2(2 + w2(ehdr->e_shnum)); /* {.rel,}__mcount_loc */ - ulseek(fd_map, 0, SEEK_SET); - uwrite(fd_map, ehdr, sizeof(*ehdr)); -} - -/* - * append64 and append32 (and other analogous pairs) could be templated - * using C++, but the complexity is high. (For an example, look at p_elf.h - * in the source for UPX, http://upx.sourceforge.net) So: remember to make - * the corresponding change in the routine for the other size. - */ -static void append64(Elf64_Ehdr *const ehdr, - Elf64_Shdr *const shstr, - uint64_t const *const mloc0, - uint64_t const *const mlocp, - Elf64_Rel const *const mrel0, - Elf64_Rel const *const mrelp, - unsigned int const rel_entsize, - unsigned int const symsec_sh_link) -{ - /* Begin constructing output file */ - Elf64_Shdr mcsec; - char const *mc_name = (sizeof(Elf64_Rela) == rel_entsize) - ? ".rela__mcount_loc" - : ".rel__mcount_loc"; - unsigned const old_shnum = w2(ehdr->e_shnum); - uint64_t const old_shoff = w8(ehdr->e_shoff); - uint64_t const old_shstr_sh_size = w8(shstr->sh_size); - uint64_t const old_shstr_sh_offset = w8(shstr->sh_offset); - uint64_t t = 1 + strlen(mc_name) + w8(shstr->sh_size); - uint64_t new_e_shoff; - - shstr->sh_size = w8(t); - shstr->sh_offset = w8(sb.st_size); - t += sb.st_size; - t += (7u & -t); /* 8-byte align */ - new_e_shoff = t; - - /* body for new shstrtab */ - ulseek(fd_map, sb.st_size, SEEK_SET); - uwrite(fd_map, old_shstr_sh_offset + (void *)ehdr, old_shstr_sh_size); - uwrite(fd_map, mc_name, 1 + strlen(mc_name)); - - /* old(modified) Elf64_Shdr table, 8-byte aligned */ - ulseek(fd_map, t, SEEK_SET); - t += sizeof(Elf64_Shdr) * old_shnum; - uwrite(fd_map, old_shoff + (void *)ehdr, - sizeof(Elf64_Shdr) * old_shnum); - - /* new sections __mcount_loc and .rel__mcount_loc */ - t += 2*sizeof(mcsec); - mcsec.sh_name = w((sizeof(Elf64_Rela) == rel_entsize) + strlen(".rel") - + old_shstr_sh_size); - mcsec.sh_type = w(SHT_PROGBITS); - mcsec.sh_flags = w8(SHF_ALLOC); - mcsec.sh_addr = 0; - mcsec.sh_offset = w8(t); - mcsec.sh_size = w8((void *)mlocp - (void *)mloc0); - mcsec.sh_link = 0; - mcsec.sh_info = 0; - mcsec.sh_addralign = w8(8); - mcsec.sh_entsize = w8(8); - uwrite(fd_map, &mcsec, sizeof(mcsec)); - - mcsec.sh_name = w(old_shstr_sh_size); - mcsec.sh_type = (sizeof(Elf64_Rela) == rel_entsize) - ? w(SHT_RELA) - : w(SHT_REL); - mcsec.sh_flags = 0; - mcsec.sh_addr = 0; - mcsec.sh_offset = w8((void *)mlocp - (void *)mloc0 + t); - mcsec.sh_size = w8((void *)mrelp - (void *)mrel0); - mcsec.sh_link = w(symsec_sh_link); - mcsec.sh_info = w(old_shnum); - mcsec.sh_addralign = w8(8); - mcsec.sh_entsize = w8(rel_entsize); - uwrite(fd_map, &mcsec, sizeof(mcsec)); - - uwrite(fd_map, mloc0, (void *)mlocp - (void *)mloc0); - uwrite(fd_map, mrel0, (void *)mrelp - (void *)mrel0); - - ehdr->e_shoff = w8(new_e_shoff); - ehdr->e_shnum = w2(2 + w2(ehdr->e_shnum)); /* {.rel,}__mcount_loc */ - ulseek(fd_map, 0, SEEK_SET); - uwrite(fd_map, ehdr, sizeof(*ehdr)); -} - -/* - * Look at the relocations in order to find the calls to mcount. - * Accumulate the section offsets that are found, and their relocation info, - * onto the end of the existing arrays. - */ -static uint32_t *sift32_rel_mcount(uint32_t *mlocp, - unsigned const offbase, - Elf32_Rel **const mrelpp, - Elf32_Shdr const *const relhdr, - Elf32_Ehdr const *const ehdr, - unsigned const recsym, - uint32_t const recval, - unsigned const reltype) -{ - uint32_t *const mloc0 = mlocp; - Elf32_Rel *mrelp = *mrelpp; - Elf32_Shdr *const shdr0 = (Elf32_Shdr *)(w(ehdr->e_shoff) - + (void *)ehdr); - unsigned const symsec_sh_link = w(relhdr->sh_link); - Elf32_Shdr const *const symsec = &shdr0[symsec_sh_link]; - Elf32_Sym const *const sym0 = (Elf32_Sym const *)(w(symsec->sh_offset) - + (void *)ehdr); - - Elf32_Shdr const *const strsec = &shdr0[w(symsec->sh_link)]; - char const *const str0 = (char const *)(w(strsec->sh_offset) - + (void *)ehdr); - - Elf32_Rel const *const rel0 = (Elf32_Rel const *)(w(relhdr->sh_offset) - + (void *)ehdr); - unsigned rel_entsize = w(relhdr->sh_entsize); - unsigned const nrel = w(relhdr->sh_size) / rel_entsize; - Elf32_Rel const *relp = rel0; - - unsigned mcountsym = 0; - unsigned t; - - for (t = nrel; t; --t) { - if (!mcountsym) { - Elf32_Sym const *const symp = - &sym0[ELF32_R_SYM(w(relp->r_info))]; - - if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), - &str0[w(symp->st_name)])) - mcountsym = ELF32_R_SYM(w(relp->r_info)); - } - if (mcountsym == ELF32_R_SYM(w(relp->r_info))) { - uint32_t const addend = w(w(relp->r_offset) - recval); - mrelp->r_offset = w(offbase - + ((void *)mlocp - (void *)mloc0)); - mrelp->r_info = w(ELF32_R_INFO(recsym, reltype)); - if (sizeof(Elf32_Rela) == rel_entsize) { - ((Elf32_Rela *)mrelp)->r_addend = addend; - *mlocp++ = 0; - } else - *mlocp++ = addend; - - mrelp = (Elf32_Rel *)(rel_entsize + (void *)mrelp); - } - relp = (Elf32_Rel const *)(rel_entsize + (void *)relp); - } - *mrelpp = mrelp; - return mlocp; -} - -static uint64_t *sift64_rel_mcount(uint64_t *mlocp, - unsigned const offbase, - Elf64_Rel **const mrelpp, - Elf64_Shdr const *const relhdr, - Elf64_Ehdr const *const ehdr, - unsigned const recsym, - uint64_t const recval, - unsigned const reltype) -{ - uint64_t *const mloc0 = mlocp; - Elf64_Rel *mrelp = *mrelpp; - Elf64_Shdr *const shdr0 = (Elf64_Shdr *)(w8(ehdr->e_shoff) - + (void *)ehdr); - unsigned const symsec_sh_link = w(relhdr->sh_link); - Elf64_Shdr const *const symsec = &shdr0[symsec_sh_link]; - Elf64_Sym const *const sym0 = (Elf64_Sym const *)(w8(symsec->sh_offset) - + (void *)ehdr); - - Elf64_Shdr const *const strsec = &shdr0[w(symsec->sh_link)]; - char const *const str0 = (char const *)(w8(strsec->sh_offset) - + (void *)ehdr); - - Elf64_Rel const *const rel0 = (Elf64_Rel const *)(w8(relhdr->sh_offset) - + (void *)ehdr); - unsigned rel_entsize = w8(relhdr->sh_entsize); - unsigned const nrel = w8(relhdr->sh_size) / rel_entsize; - Elf64_Rel const *relp = rel0; - - unsigned mcountsym = 0; - unsigned t; - - for (t = nrel; 0 != t; --t) { - if (!mcountsym) { - Elf64_Sym const *const symp = - &sym0[ELF64_R_SYM(w8(relp->r_info))]; - char const *symname = &str0[w(symp->st_name)]; - - if ('.' == symname[0]) - ++symname; /* ppc64 hack */ - if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), - symname)) - mcountsym = ELF64_R_SYM(w8(relp->r_info)); - } - - if (mcountsym == ELF64_R_SYM(w8(relp->r_info))) { - uint64_t const addend = w8(w8(relp->r_offset) - recval); - - mrelp->r_offset = w8(offbase - + ((void *)mlocp - (void *)mloc0)); - mrelp->r_info = w8(ELF64_R_INFO(recsym, reltype)); - if (sizeof(Elf64_Rela) == rel_entsize) { - ((Elf64_Rela *)mrelp)->r_addend = addend; - *mlocp++ = 0; - } else - *mlocp++ = addend; - - mrelp = (Elf64_Rel *)(rel_entsize + (void *)mrelp); - } - relp = (Elf64_Rel const *)(rel_entsize + (void *)relp); - } - *mrelpp = mrelp; - - return mlocp; -} - -/* - * Find a symbol in the given section, to be used as the base for relocating - * the table of offsets of calls to mcount. A local or global symbol suffices, - * but avoid a Weak symbol because it may be overridden; the change in value - * would invalidate the relocations of the offsets of the calls to mcount. - * Often the found symbol will be the unnamed local symbol generated by - * GNU 'as' for the start of each section. For example: - * Num: Value Size Type Bind Vis Ndx Name - * 2: 00000000 0 SECTION LOCAL DEFAULT 1 - */ -static unsigned find32_secsym_ndx(unsigned const txtndx, - char const *const txtname, - uint32_t *const recvalp, - Elf32_Shdr const *const symhdr, - Elf32_Ehdr const *const ehdr) -{ - Elf32_Sym const *const sym0 = (Elf32_Sym const *)(w(symhdr->sh_offset) - + (void *)ehdr); - unsigned const nsym = w(symhdr->sh_size) / w(symhdr->sh_entsize); - Elf32_Sym const *symp; - unsigned t; - - for (symp = sym0, t = nsym; t; --t, ++symp) { - unsigned int const st_bind = ELF32_ST_BIND(symp->st_info); - - if (txtndx == w2(symp->st_shndx) - /* avoid STB_WEAK */ - && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { - *recvalp = w(symp->st_value); - return symp - sym0; - } - } - fprintf(stderr, "Cannot find symbol for section %d: %s.\n", - txtndx, txtname); - fail_file(); -} - -static unsigned find64_secsym_ndx(unsigned const txtndx, - char const *const txtname, - uint64_t *const recvalp, - Elf64_Shdr const *const symhdr, - Elf64_Ehdr const *const ehdr) -{ - Elf64_Sym const *const sym0 = (Elf64_Sym const *)(w8(symhdr->sh_offset) - + (void *)ehdr); - unsigned const nsym = w8(symhdr->sh_size) / w8(symhdr->sh_entsize); - Elf64_Sym const *symp; - unsigned t; - - for (symp = sym0, t = nsym; t; --t, ++symp) { - unsigned int const st_bind = ELF64_ST_BIND(symp->st_info); - - if (txtndx == w2(symp->st_shndx) - /* avoid STB_WEAK */ - && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { - *recvalp = w8(symp->st_value); - return symp - sym0; - } - } - fprintf(stderr, "Cannot find symbol for section %d: %s.\n", - txtndx, txtname); - fail_file(); -} - -/* - * Evade ISO C restriction: no declaration after statement in - * has32_rel_mcount. - */ -static char const * -__has32_rel_mcount(Elf32_Shdr const *const relhdr, /* is SHT_REL or SHT_RELA */ - Elf32_Shdr const *const shdr0, - char const *const shstrtab, - char const *const fname) -{ - /* .sh_info depends on .sh_type == SHT_REL[,A] */ - Elf32_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)]; - char const *const txtname = &shstrtab[w(txthdr->sh_name)]; - - if (0 == strcmp("__mcount_loc", txtname)) { - fprintf(stderr, "warning: __mcount_loc already exists: %s\n", - fname); - succeed_file(); - } - if (SHT_PROGBITS != w(txthdr->sh_type) || - !is_mcounted_section_name(txtname)) - return NULL; - return txtname; -} - -static char const *has32_rel_mcount(Elf32_Shdr const *const relhdr, - Elf32_Shdr const *const shdr0, - char const *const shstrtab, - char const *const fname) -{ - if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type)) - return NULL; - return __has32_rel_mcount(relhdr, shdr0, shstrtab, fname); -} - -static char const *__has64_rel_mcount(Elf64_Shdr const *const relhdr, - Elf64_Shdr const *const shdr0, - char const *const shstrtab, - char const *const fname) -{ - /* .sh_info depends on .sh_type == SHT_REL[,A] */ - Elf64_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)]; - char const *const txtname = &shstrtab[w(txthdr->sh_name)]; - - if (0 == strcmp("__mcount_loc", txtname)) { - fprintf(stderr, "warning: __mcount_loc already exists: %s\n", - fname); - succeed_file(); - } - if (SHT_PROGBITS != w(txthdr->sh_type) || - !is_mcounted_section_name(txtname)) - return NULL; - return txtname; -} - -static char const *has64_rel_mcount(Elf64_Shdr const *const relhdr, - Elf64_Shdr const *const shdr0, - char const *const shstrtab, - char const *const fname) -{ - if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type)) - return NULL; - return __has64_rel_mcount(relhdr, shdr0, shstrtab, fname); -} - -static unsigned tot32_relsize(Elf32_Shdr const *const shdr0, - unsigned nhdr, - const char *const shstrtab, - const char *const fname) -{ - unsigned totrelsz = 0; - Elf32_Shdr const *shdrp = shdr0; - for (; 0 != nhdr; --nhdr, ++shdrp) { - if (has32_rel_mcount(shdrp, shdr0, shstrtab, fname)) - totrelsz += w(shdrp->sh_size); - } - return totrelsz; -} - -static unsigned tot64_relsize(Elf64_Shdr const *const shdr0, - unsigned nhdr, - const char *const shstrtab, - const char *const fname) -{ - unsigned totrelsz = 0; - Elf64_Shdr const *shdrp = shdr0; - - for (; nhdr; --nhdr, ++shdrp) { - if (has64_rel_mcount(shdrp, shdr0, shstrtab, fname)) - totrelsz += w8(shdrp->sh_size); - } - return totrelsz; -} - -/* Overall supervision for Elf32 ET_REL file. */ -static void -do32(Elf32_Ehdr *const ehdr, char const *const fname, unsigned const reltype) -{ - Elf32_Shdr *const shdr0 = (Elf32_Shdr *)(w(ehdr->e_shoff) - + (void *)ehdr); - unsigned const nhdr = w2(ehdr->e_shnum); - Elf32_Shdr *const shstr = &shdr0[w2(ehdr->e_shstrndx)]; - char const *const shstrtab = (char const *)(w(shstr->sh_offset) - + (void *)ehdr); - - Elf32_Shdr const *relhdr; - unsigned k; - - /* Upper bound on space: assume all relevant relocs are for mcount. */ - unsigned const totrelsz = tot32_relsize(shdr0, nhdr, shstrtab, fname); - Elf32_Rel *const mrel0 = umalloc(totrelsz); - Elf32_Rel * mrelp = mrel0; - - /* 2*sizeof(address) <= sizeof(Elf32_Rel) */ - uint32_t *const mloc0 = umalloc(totrelsz>>1); - uint32_t * mlocp = mloc0; - - unsigned rel_entsize = 0; - unsigned symsec_sh_link = 0; - - for (relhdr = shdr0, k = nhdr; k; --k, ++relhdr) { - char const *const txtname = has32_rel_mcount(relhdr, shdr0, - shstrtab, fname); - if (txtname) { - uint32_t recval = 0; - unsigned const recsym = find32_secsym_ndx( - w(relhdr->sh_info), txtname, &recval, - &shdr0[symsec_sh_link = w(relhdr->sh_link)], - ehdr); - - rel_entsize = w(relhdr->sh_entsize); - mlocp = sift32_rel_mcount(mlocp, - (void *)mlocp - (void *)mloc0, &mrelp, - relhdr, ehdr, recsym, recval, reltype); - } - } - if (mloc0 != mlocp) { - append32(ehdr, shstr, mloc0, mlocp, mrel0, mrelp, - rel_entsize, symsec_sh_link); - } - free(mrel0); - free(mloc0); -} - -static void -do64(Elf64_Ehdr *const ehdr, char const *const fname, unsigned const reltype) -{ - Elf64_Shdr *const shdr0 = (Elf64_Shdr *)(w8(ehdr->e_shoff) - + (void *)ehdr); - unsigned const nhdr = w2(ehdr->e_shnum); - Elf64_Shdr *const shstr = &shdr0[w2(ehdr->e_shstrndx)]; - char const *const shstrtab = (char const *)(w8(shstr->sh_offset) - + (void *)ehdr); - - Elf64_Shdr const *relhdr; - unsigned k; - - /* Upper bound on space: assume all relevant relocs are for mcount. */ - unsigned const totrelsz = tot64_relsize(shdr0, nhdr, shstrtab, fname); - Elf64_Rel *const mrel0 = umalloc(totrelsz); - Elf64_Rel * mrelp = mrel0; - - /* 2*sizeof(address) <= sizeof(Elf64_Rel) */ - uint64_t *const mloc0 = umalloc(totrelsz>>1); - uint64_t * mlocp = mloc0; - - unsigned rel_entsize = 0; - unsigned symsec_sh_link = 0; - - for ((relhdr = shdr0), k = nhdr; k; --k, ++relhdr) { - char const *const txtname = has64_rel_mcount(relhdr, shdr0, - shstrtab, fname); - if (txtname) { - uint64_t recval = 0; - unsigned const recsym = find64_secsym_ndx( - w(relhdr->sh_info), txtname, &recval, - &shdr0[symsec_sh_link = w(relhdr->sh_link)], - ehdr); - - rel_entsize = w8(relhdr->sh_entsize); - mlocp = sift64_rel_mcount(mlocp, - (void *)mlocp - (void *)mloc0, &mrelp, - relhdr, ehdr, recsym, recval, reltype); - } - } - if (mloc0 != mlocp) { - append64(ehdr, shstr, mloc0, mlocp, mrel0, mrelp, - rel_entsize, symsec_sh_link); - } - free(mrel0); - free(mloc0); -} +/* 32 bit and 64 bit are very similar */ +#include "recordmcount.h" +#define RECORD_MCOUNT_64 +#include "recordmcount.h" static void do_file(char const *const fname) diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h new file mode 100644 index 00000000000..7f39d0943d2 --- /dev/null +++ b/scripts/recordmcount.h @@ -0,0 +1,366 @@ +/* + * recordmcount.h + * + * This code was taken out of recordmcount.c written by + * Copyright 2009 John F. Reiser . All rights reserved. + * + * The original code had the same algorithms for both 32bit + * and 64bit ELF files, but the code was duplicated to support + * the difference in structures that were used. This + * file creates a macro of everything that is different between + * the 64 and 32 bit code, such that by including this header + * twice we can create both sets of functions by including this + * header once with RECORD_MCOUNT_64 undefined, and again with + * it defined. + * + * This conversion to macros was done by: + * Copyright 2010 Steven Rostedt , Red Hat Inc. + * + * Licensed under the GNU General Public License, version 2 (GPLv2). + */ +#undef append_func +#undef sift_rel_mcount +#undef find_secsym_ndx +#undef __has_rel_mcount +#undef has_rel_mcount +#undef tot_relsize +#undef do_func +#undef Elf_Ehdr +#undef Elf_Shdr +#undef Elf_Rel +#undef Elf_Rela +#undef Elf_Sym +#undef ELF_R_SYM +#undef ELF_R_INFO +#undef ELF_ST_BIND +#undef uint_t +#undef _w +#undef _align +#undef _size + +#ifdef RECORD_MCOUNT_64 +# define append_func append64 +# define sift_rel_mcount sift64_rel_mcount +# define find_secsym_ndx find64_secsym_ndx +# define __has_rel_mcount __has64_rel_mcount +# define has_rel_mcount has64_rel_mcount +# define tot_relsize tot64_relsize +# define do_func do64 +# define Elf_Ehdr Elf64_Ehdr +# define Elf_Shdr Elf64_Shdr +# define Elf_Rel Elf64_Rel +# define Elf_Rela Elf64_Rela +# define Elf_Sym Elf64_Sym +# define ELF_R_SYM ELF64_R_SYM +# define ELF_R_INFO ELF64_R_INFO +# define ELF_ST_BIND ELF64_ST_BIND +# define uint_t uint64_t +# define _w w8 +# define _align 7u +# define _size 8 +#else +# define append_func append32 +# define sift_rel_mcount sift32_rel_mcount +# define find_secsym_ndx find32_secsym_ndx +# define __has_rel_mcount __has32_rel_mcount +# define has_rel_mcount has32_rel_mcount +# define tot_relsize tot32_relsize +# define do_func do32 +# define Elf_Ehdr Elf32_Ehdr +# define Elf_Shdr Elf32_Shdr +# define Elf_Rel Elf32_Rel +# define Elf_Rela Elf32_Rela +# define Elf_Sym Elf32_Sym +# define ELF_R_SYM ELF32_R_SYM +# define ELF_R_INFO ELF32_R_INFO +# define ELF_ST_BIND ELF32_ST_BIND +# define uint_t uint32_t +# define _w w +# define _align 3u +# define _size 4 +#endif + +/* Append the new shstrtab, Elf_Shdr[], __mcount_loc and its relocations. */ +static void append_func(Elf_Ehdr *const ehdr, + Elf_Shdr *const shstr, + uint_t const *const mloc0, + uint_t const *const mlocp, + Elf_Rel const *const mrel0, + Elf_Rel const *const mrelp, + unsigned int const rel_entsize, + unsigned int const symsec_sh_link) +{ + /* Begin constructing output file */ + Elf_Shdr mcsec; + char const *mc_name = (sizeof(Elf_Rela) == rel_entsize) + ? ".rela__mcount_loc" + : ".rel__mcount_loc"; + unsigned const old_shnum = w2(ehdr->e_shnum); + uint_t const old_shoff = _w(ehdr->e_shoff); + uint_t const old_shstr_sh_size = _w(shstr->sh_size); + uint_t const old_shstr_sh_offset = _w(shstr->sh_offset); + uint_t t = 1 + strlen(mc_name) + _w(shstr->sh_size); + uint_t new_e_shoff; + + shstr->sh_size = _w(t); + shstr->sh_offset = _w(sb.st_size); + t += sb.st_size; + t += (_align & -t); /* word-byte align */ + new_e_shoff = t; + + /* body for new shstrtab */ + ulseek(fd_map, sb.st_size, SEEK_SET); + uwrite(fd_map, old_shstr_sh_offset + (void *)ehdr, old_shstr_sh_size); + uwrite(fd_map, mc_name, 1 + strlen(mc_name)); + + /* old(modified) Elf_Shdr table, word-byte aligned */ + ulseek(fd_map, t, SEEK_SET); + t += sizeof(Elf_Shdr) * old_shnum; + uwrite(fd_map, old_shoff + (void *)ehdr, + sizeof(Elf_Shdr) * old_shnum); + + /* new sections __mcount_loc and .rel__mcount_loc */ + t += 2*sizeof(mcsec); + mcsec.sh_name = w((sizeof(Elf_Rela) == rel_entsize) + strlen(".rel") + + old_shstr_sh_size); + mcsec.sh_type = w(SHT_PROGBITS); + mcsec.sh_flags = _w(SHF_ALLOC); + mcsec.sh_addr = 0; + mcsec.sh_offset = _w(t); + mcsec.sh_size = _w((void *)mlocp - (void *)mloc0); + mcsec.sh_link = 0; + mcsec.sh_info = 0; + mcsec.sh_addralign = _w(_size); + mcsec.sh_entsize = _w(_size); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + mcsec.sh_name = w(old_shstr_sh_size); + mcsec.sh_type = (sizeof(Elf_Rela) == rel_entsize) + ? w(SHT_RELA) + : w(SHT_REL); + mcsec.sh_flags = 0; + mcsec.sh_addr = 0; + mcsec.sh_offset = _w((void *)mlocp - (void *)mloc0 + t); + mcsec.sh_size = _w((void *)mrelp - (void *)mrel0); + mcsec.sh_link = w(symsec_sh_link); + mcsec.sh_info = w(old_shnum); + mcsec.sh_addralign = _w(_size); + mcsec.sh_entsize = _w(rel_entsize); + uwrite(fd_map, &mcsec, sizeof(mcsec)); + + uwrite(fd_map, mloc0, (void *)mlocp - (void *)mloc0); + uwrite(fd_map, mrel0, (void *)mrelp - (void *)mrel0); + + ehdr->e_shoff = _w(new_e_shoff); + ehdr->e_shnum = w2(2 + w2(ehdr->e_shnum)); /* {.rel,}__mcount_loc */ + ulseek(fd_map, 0, SEEK_SET); + uwrite(fd_map, ehdr, sizeof(*ehdr)); +} + + +/* + * Look at the relocations in order to find the calls to mcount. + * Accumulate the section offsets that are found, and their relocation info, + * onto the end of the existing arrays. + */ +static uint_t *sift_rel_mcount(uint_t *mlocp, + unsigned const offbase, + Elf_Rel **const mrelpp, + Elf_Shdr const *const relhdr, + Elf_Ehdr const *const ehdr, + unsigned const recsym, + uint_t const recval, + unsigned const reltype) +{ + uint_t *const mloc0 = mlocp; + Elf_Rel *mrelp = *mrelpp; + Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + + (void *)ehdr); + unsigned const symsec_sh_link = w(relhdr->sh_link); + Elf_Shdr const *const symsec = &shdr0[symsec_sh_link]; + Elf_Sym const *const sym0 = (Elf_Sym const *)(_w(symsec->sh_offset) + + (void *)ehdr); + + Elf_Shdr const *const strsec = &shdr0[w(symsec->sh_link)]; + char const *const str0 = (char const *)(_w(strsec->sh_offset) + + (void *)ehdr); + + Elf_Rel const *const rel0 = (Elf_Rel const *)(_w(relhdr->sh_offset) + + (void *)ehdr); + unsigned rel_entsize = _w(relhdr->sh_entsize); + unsigned const nrel = _w(relhdr->sh_size) / rel_entsize; + Elf_Rel const *relp = rel0; + + unsigned mcountsym = 0; + unsigned t; + + for (t = nrel; t; --t) { + if (!mcountsym) { + Elf_Sym const *const symp = + &sym0[ELF_R_SYM(_w(relp->r_info))]; + char const *symname = &str0[w(symp->st_name)]; + + if ('.' == symname[0]) + ++symname; /* ppc64 hack */ + if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), + symname)) + mcountsym = ELF_R_SYM(_w(relp->r_info)); + } + + if (mcountsym == ELF_R_SYM(_w(relp->r_info))) { + uint_t const addend = _w(_w(relp->r_offset) - recval); + + mrelp->r_offset = _w(offbase + + ((void *)mlocp - (void *)mloc0)); + mrelp->r_info = _w(ELF_R_INFO(recsym, reltype)); + if (sizeof(Elf_Rela) == rel_entsize) { + ((Elf_Rela *)mrelp)->r_addend = addend; + *mlocp++ = 0; + } else + *mlocp++ = addend; + + mrelp = (Elf_Rel *)(rel_entsize + (void *)mrelp); + } + relp = (Elf_Rel const *)(rel_entsize + (void *)relp); + } + *mrelpp = mrelp; + return mlocp; +} + + +/* + * Find a symbol in the given section, to be used as the base for relocating + * the table of offsets of calls to mcount. A local or global symbol suffices, + * but avoid a Weak symbol because it may be overridden; the change in value + * would invalidate the relocations of the offsets of the calls to mcount. + * Often the found symbol will be the unnamed local symbol generated by + * GNU 'as' for the start of each section. For example: + * Num: Value Size Type Bind Vis Ndx Name + * 2: 00000000 0 SECTION LOCAL DEFAULT 1 + */ +static unsigned find_secsym_ndx(unsigned const txtndx, + char const *const txtname, + uint_t *const recvalp, + Elf_Shdr const *const symhdr, + Elf_Ehdr const *const ehdr) +{ + Elf_Sym const *const sym0 = (Elf_Sym const *)(_w(symhdr->sh_offset) + + (void *)ehdr); + unsigned const nsym = _w(symhdr->sh_size) / _w(symhdr->sh_entsize); + Elf_Sym const *symp; + unsigned t; + + for (symp = sym0, t = nsym; t; --t, ++symp) { + unsigned int const st_bind = ELF_ST_BIND(symp->st_info); + + if (txtndx == w2(symp->st_shndx) + /* avoid STB_WEAK */ + && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { + *recvalp = _w(symp->st_value); + return symp - sym0; + } + } + fprintf(stderr, "Cannot find symbol for section %d: %s.\n", + txtndx, txtname); + fail_file(); +} + + +/* Evade ISO C restriction: no declaration after statement in has_rel_mcount. */ +static char const * +__has_rel_mcount(Elf_Shdr const *const relhdr, /* is SHT_REL or SHT_RELA */ + Elf_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + /* .sh_info depends on .sh_type == SHT_REL[,A] */ + Elf_Shdr const *const txthdr = &shdr0[w(relhdr->sh_info)]; + char const *const txtname = &shstrtab[w(txthdr->sh_name)]; + + if (0 == strcmp("__mcount_loc", txtname)) { + fprintf(stderr, "warning: __mcount_loc already exists: %s\n", + fname); + succeed_file(); + } + if (SHT_PROGBITS != w(txthdr->sh_type) || + !is_mcounted_section_name(txtname)) + return NULL; + return txtname; +} + +static char const *has_rel_mcount(Elf_Shdr const *const relhdr, + Elf_Shdr const *const shdr0, + char const *const shstrtab, + char const *const fname) +{ + if (SHT_REL != w(relhdr->sh_type) && SHT_RELA != w(relhdr->sh_type)) + return NULL; + return __has_rel_mcount(relhdr, shdr0, shstrtab, fname); +} + + +static unsigned tot_relsize(Elf_Shdr const *const shdr0, + unsigned nhdr, + const char *const shstrtab, + const char *const fname) +{ + unsigned totrelsz = 0; + Elf_Shdr const *shdrp = shdr0; + + for (; nhdr; --nhdr, ++shdrp) { + if (has_rel_mcount(shdrp, shdr0, shstrtab, fname)) + totrelsz += _w(shdrp->sh_size); + } + return totrelsz; +} + + +/* Overall supervision for Elf32 ET_REL file. */ +static void +do_func(Elf_Ehdr *const ehdr, char const *const fname, unsigned const reltype) +{ + Elf_Shdr *const shdr0 = (Elf_Shdr *)(_w(ehdr->e_shoff) + + (void *)ehdr); + unsigned const nhdr = w2(ehdr->e_shnum); + Elf_Shdr *const shstr = &shdr0[w2(ehdr->e_shstrndx)]; + char const *const shstrtab = (char const *)(_w(shstr->sh_offset) + + (void *)ehdr); + + Elf_Shdr const *relhdr; + unsigned k; + + /* Upper bound on space: assume all relevant relocs are for mcount. */ + unsigned const totrelsz = tot_relsize(shdr0, nhdr, shstrtab, fname); + Elf_Rel *const mrel0 = umalloc(totrelsz); + Elf_Rel * mrelp = mrel0; + + /* 2*sizeof(address) <= sizeof(Elf_Rel) */ + uint_t *const mloc0 = umalloc(totrelsz>>1); + uint_t * mlocp = mloc0; + + unsigned rel_entsize = 0; + unsigned symsec_sh_link = 0; + + for (relhdr = shdr0, k = nhdr; k; --k, ++relhdr) { + char const *const txtname = has_rel_mcount(relhdr, shdr0, + shstrtab, fname); + if (txtname) { + uint_t recval = 0; + unsigned const recsym = find_secsym_ndx( + w(relhdr->sh_info), txtname, &recval, + &shdr0[symsec_sh_link = w(relhdr->sh_link)], + ehdr); + + rel_entsize = _w(relhdr->sh_entsize); + mlocp = sift_rel_mcount(mlocp, + (void *)mlocp - (void *)mloc0, &mrelp, + relhdr, ehdr, recsym, recval, reltype); + } + } + if (mloc0 != mlocp) { + append_func(ehdr, shstr, mloc0, mlocp, mrel0, mrelp, + rel_entsize, symsec_sh_link); + } + free(mrel0); + free(mloc0); +} -- cgit v1.2.3-70-g09d2 From 444758636439810f110f86a3042c2dfd3626a9e2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 15 Oct 2010 11:49:47 -0400 Subject: ftrace: Do not process kernel/trace/ftrace.o with C recordmcount program The file kernel/trace/ftrace.c references the mcount() call to convert the mcount() callers to nops. But because it references mcount(), the mcount() address is placed in the relocation table. The C version of recordmcount reads the relocation table of all object files, and it will add all references to mcount to the __mcount_loc table that is used to find the places that call mcount() and change the call to a nop. When recordmcount finds the mcount reference in kernel/trace/ftrace.o, it saves that location even though the code is not a call, but references mcount as data. On boot up, when all calls are converted to nops, the code has a safety check to determine what op code it is actually replacing before it replaces it. If that op code at the address does not match, then a warning is printed and the function tracer is disabled. The reference to mcount in ftrace.c, causes this warning to trigger, since the reference is not a call to mcount(). The ftrace.c file is not compiled with the -pg flag, so no calls to mcount() should be expected. This patch simply makes recordmcount.c skip the kernel/trace/ftrace.c file. This was the same solution used by the perl version of recordmcount. Reported-by: Ingo Molnar Cc: John Reiser Signed-off-by: Steven Rostedt --- scripts/recordmcount.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 7f7f7180fe2..26e1271259b 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -313,12 +313,30 @@ do_file(char const *const fname) int main(int argc, char const *argv[]) { + const char ftrace[] = "kernel/trace/ftrace.o"; + int ftrace_size = sizeof(ftrace) - 1; int n_error = 0; /* gcc-4.3.0 false positive complaint */ - if (argc <= 1) + + if (argc <= 1) { fprintf(stderr, "usage: recordmcount file.o...\n"); - else /* Process each file in turn, allowing deep failure. */ + return 0; + } + + /* Process each file in turn, allowing deep failure. */ for (--argc, ++argv; 0 < argc; --argc, ++argv) { int const sjval = setjmp(jmpenv); + int len; + + /* + * The file kernel/trace/ftrace.o references the mcount + * function but does not call it. Since ftrace.o should + * not be traced anyway, we just skip it. + */ + len = strlen(argv[0]); + if (len >= ftrace_size && + strcmp(argv[0] + (len - ftrace_size), ftrace) == 0) + continue; + switch (sjval) { default: { fprintf(stderr, "internal error: %s\n", argv[0]); -- cgit v1.2.3-70-g09d2 From 85caa993d7f218b7c2abcfcb28e212396b6a3313 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 15 Oct 2010 12:09:25 -0400 Subject: ftrace: Use objtree for C version of recordmcount The C version of recordmcount is compiled to a binary, which will end up located in the objtree. If the kernel is built with O=path, the srctree will not include the binary recordmcount caller. Cc: Michal Marek Cc: linux-kbuild@vger.kernel.org Signed-off-by: Steven Rostedt --- scripts/Makefile.build | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 4d03a7efc68..4db60b2e2a7 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -210,7 +210,7 @@ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD ifdef BUILD_C_RECORDMCOUNT -cmd_record_mcount = $(srctree)/scripts/recordmcount "$(@)"; +cmd_record_mcount = $(objtree)/scripts/recordmcount "$(@)"; else cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ -- cgit v1.2.3-70-g09d2 From d7b4d6de57d414a6384376880f2caf7125a45494 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 18 Oct 2010 14:42:00 -0400 Subject: ftrace: Remove recursion between recordmcount and scripts/mod/empty When DYNAMIC_FTRACE is enabled and we use the C version of recordmcount, all objects are run through the recordmcount program to create a separate section that stores all the callers of mcount. The build process has a special file: scripts/mod/empty.o. This is built from empty.c which is literally an empty file (except for a single comment). This file is used to find information about the target elf format, like endianness and word size. The problem comes up when we need to build recordmcount. The build process requires that empty.o is built first. The build rules for empty.o will try to execute recordmcount on the empty.o file. We get an error that recordmcount does not exist. To avoid this recursion, the build file will skip running recordmcount if the file that it is building is script/mod/empty.o. [ extra comment Suggested-by: Sam Ravnborg ] Reported-by: Ingo Molnar Tested-by: Ingo Molnar Cc: Michal Marek Cc: linux-kbuild@vger.kernel.org Signed-off-by: Steven Rostedt --- scripts/Makefile.build | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 4db60b2e2a7..843bd4f4ffc 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -210,7 +210,13 @@ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD ifdef BUILD_C_RECORDMCOUNT -cmd_record_mcount = $(objtree)/scripts/recordmcount "$(@)"; +# Due to recursion, we must skip empty.o. +# The empty.o file is created in the make process in order to determine +# the target endianness and word size. It is made before all other C +# files, including recordmcount. +cmd_record_mcount = if [ $(@) != "scripts/mod/empty.o" ]; then \ + $(objtree)/scripts/recordmcount "$(@)"; \ + fi; else cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ -- cgit v1.2.3-70-g09d2 From 63ab52db5ba7f362266cfed03109387ca73e5eb5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:51 -0700 Subject: scripts/get_maintainer.pl: Add --git-blame --rolestats "Authored lines" information When options --git-blame and --rolestats are specified, add the maintainers with the qualifying --git-min-percent amount of lines authored of the complete file. Does not add more authors than specified by --git-max-maintainers. For anyone using hg, this option works but is _very_ slow. It's orders of magnitude slower than git slow. The get_maintainer.pl version was incremented to 0.25. This can be used with or without --git. For instance: $ ./scripts/get_maintainer.pl --git-blame --nogit --rolestats -f lib/bitmap.c Paul Jackson (authored lines:406/613=66%,commits:7/20=35%) Akinobu Mita (authored lines:87/613=14%,commits:3/20=15%) Reinette Chatre (authored lines:42/613=7%) Andrew Morton (commits:16/20=80%) Paul Mundt (commits:3/20=15%) Randy Dunlap (commits:2/20=10%) $ ./scripts/get_maintainer.pl --git-blame --git --rolestats -f lib/bitmap.c Andrew Morton (commit_signer:4/5=80%,commits:16/20=80%) Akinobu Mita (commit_signer:2/5=40%,authored lines:87/613=14%,commits:3/20=15%) Jack Steiner (commit_signer:1/5=20%) Ben Hutchings (commit_signer:1/5=20%) Lee Schermerhorn (commit_signer:1/5=20%) Paul Jackson (authored lines:406/613=66%,commits:7/20=35%) Reinette Chatre (authored lines:42/613=7%) Paul Mundt (commits:3/20=15%) Randy Dunlap (commits:2/20=10%) linux-kernel@vger.kernel.org (open list) Signed-off-by: Joe Perches Cc: Mark Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 60 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 57 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index b2281982f52..a91ae631840 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.24'; +my $V = '0.25'; use Getopt::Long qw(:config no_auto_abbrev); @@ -88,6 +88,7 @@ my %VCS_cmds_git = ( "available" => '(which("git") ne "") && (-d ".git")', "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file", "find_commit_signers_cmd" => "git log --no-color -1 \$commit", + "find_commit_author_cmd" => "git log -1 --format=\"%an <%ae>\" \$commit", "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", @@ -101,6 +102,7 @@ my %VCS_cmds_hg = ( "hg log --date=\$email_hg_since" . " --template='commit {node}\\n{desc}\\n' -- \$file", "find_commit_signers_cmd" => "hg log --template='{desc}\\n' -r \$commit", + "find_commit_author_cmd" => "hg log -l 1 --template='{author}\\n' -r \$commit", "blame_range_cmd" => "", # not supported "blame_file_cmd" => "hg blame -c \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", @@ -1014,6 +1016,9 @@ sub vcs_find_signers { if (!$email_git_penguin_chiefs) { @lines = grep(!/${penguin_chiefs}/i, @lines); } + + return (0, @lines) if !@lines; + # cut -f2- -d":" s/.*:\s*(.+)\s*/$1/ for (@lines); @@ -1027,6 +1032,28 @@ sub vcs_find_signers { return ($commits, @lines); } +sub vcs_find_author { + my ($cmd) = @_; + my @lines = (); + + @lines = &{$VCS_cmds{"execute_cmd"}}($cmd); + + if (!$email_git_penguin_chiefs) { + @lines = grep(!/${penguin_chiefs}/i, @lines); + } + + return @lines if !@lines; + +## Reformat email addresses (with names) to avoid badly written signatures + + foreach my $line (@lines) { + my ($name, $address) = parse_email($line); + $line = format_email($name, $address, 1); + } + + return @lines; +} + sub vcs_save_commits { my ($cmd) = @_; my @lines = (); @@ -1084,6 +1111,10 @@ sub vcs_blame { @commits = vcs_save_commits($cmd); } + foreach my $commit (@commits) { + $commit =~ s/^\^//g; + } + return @commits; } @@ -1121,6 +1152,8 @@ sub vcs_assign { @lines = mailmap(@lines); } + return if (@lines <= 0); + @lines = sort(@lines); # uniq -c @@ -1165,14 +1198,17 @@ sub vcs_file_blame { my ($file) = @_; my @signers = (); + my @all_commits = (); my @commits = (); my $total_commits; + my $total_lines; return if (!vcs_exists()); - @commits = vcs_blame($file); - @commits = uniq(@commits); + @all_commits = vcs_blame($file); + @commits = uniq(@all_commits); $total_commits = @commits; + $total_lines = @all_commits; foreach my $commit (@commits) { my $commit_count; @@ -1182,10 +1218,28 @@ sub vcs_file_blame { $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd ($commit_count, @commit_signers) = vcs_find_signers($cmd); + push(@signers, @commit_signers); } if ($from_filename) { + if ($output_rolestats) { + my @blame_signers; + foreach my $commit (@commits) { + my $i; + my $cmd = $VCS_cmds{"find_commit_author_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd + my @author = vcs_find_author($cmd); + next if !@author; + my $count = grep(/$commit/, @all_commits); + for ($i = 0; $i < $count ; $i++) { + push(@blame_signers, $author[0]); + } + } + if (@blame_signers) { + vcs_assign("authored lines", $total_lines, @blame_signers); + } + } vcs_assign("commits", $total_commits, @signers); } else { vcs_assign("modified commits", $total_commits, @signers); -- cgit v1.2.3-70-g09d2 From 6ffd9485f5c9c0b2d2aea9f904dff08e7088010a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:51 -0700 Subject: scripts/get_maintainer.pl: use correct indentation Fix an overly indented block. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index a91ae631840..65c6acf1bb3 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -420,23 +420,23 @@ foreach my $file (@files) { foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { add_categories($line); - if ($sections) { - my $i; - my $start = find_starting_index($line); - my $end = find_ending_index($line); - for ($i = $start; $i < $end; $i++) { - my $line = $typevalue[$i]; - if ($line =~ /^[FX]:/) { ##Restore file patterns - $line =~ s/([^\\])\.([^\*])/$1\?$2/g; - $line =~ s/([^\\])\.$/$1\?/g; ##Convert . back to ? - $line =~ s/\\\./\./g; ##Convert \. to . - $line =~ s/\.\*/\*/g; ##Convert .* to * - } - $line =~ s/^([A-Z]):/$1:\t/g; - print("$line\n"); + if ($sections) { + my $i; + my $start = find_starting_index($line); + my $end = find_ending_index($line); + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; + if ($line =~ /^[FX]:/) { ##Restore file patterns + $line =~ s/([^\\])\.([^\*])/$1\?$2/g; + $line =~ s/([^\\])\.$/$1\?/g; ##Convert . back to ? + $line =~ s/\\\./\./g; ##Convert \. to . + $line =~ s/\.\*/\*/g; ##Convert .* to * } - print("\n"); + $line =~ s/^([A-Z]):/$1:\t/g; + print("$line\n"); } + print("\n"); + } } if ($email && $email_git) { -- cgit v1.2.3-70-g09d2 From fab9ed12fcd0c182a72509382c3da55c527963e3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:52 -0700 Subject: scripts/get_maintainer.pl: don't search MAINTAINERS for keywords or emails Keyword matching uses K: patterns from MAINTAINERS, so if looking for the MAINTAINERS maintainer, don't search MAINTAINERS for pattern matches. MAINTAINERS also has rather a lot of email addresses and is easily searched using grep "^M:", so skip it. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 65c6acf1bb3..77f4f2e4cd8 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -304,7 +304,7 @@ foreach my $file (@ARGV) { } if ($from_filename) { push(@files, $file); - if (-f $file && ($keywords || $file_emails)) { + if ($file ne "MAINTAINERS" && -f $file && ($keywords || $file_emails)) { open(my $f, '<', $file) or die "$P: Can't open $file: $!\n"; my $text = do { local($/) ; <$f> }; -- cgit v1.2.3-70-g09d2 From e3e9d11479737692f797bad1762f71468d577a93 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:53 -0700 Subject: scripts/get_maintainer.pl: add default --git-fallback, remove default --git Adding commit signers when there is a listed MAINTAINER for a file can make the output list longer than necessary. Change the --git default from on to off. Add a new --git-fallback option (default on) used to add commit signers only when there is no MAINTAINER for a file. git history is used when --git-fallback is enabled and the pattern directory depth is not the same as the file directory depth. For instance: X86 ARCHITECTURE (32-BIT AND 64-BIT) M: Thomas Gleixner M: Ingo Molnar M: "H. Peter Anvin" M: x86@kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git S: Maintained F: Documentation/x86/ F: arch/x86/ If using "./scripts/get_maintainer -f arch/x86/lib/atomic64_32.c", the pattern for "arch/x86/" does not match the directory depth of "arch/x86/lib" so the MAINTAINERS entries and git history is used to produce: $ ./scripts/get_maintainer.pl -f --rolestats arch/x86/lib/atomic64_32.c Thomas Gleixner (maintainer:X86 ARCHITECTURE...) Ingo Molnar (maintainer:X86 ARCHITECTURE...) "H. Peter Anvin" (maintainer:X86 ARCHITECTURE...,commit_signer:1/1=100%) x86@kernel.org (maintainer:X86 ARCHITECTURE...) Luca Barbieri (commit_signer:1/1=100%) linux-kernel@vger.kernel.org (open list) Luca Barbieri is added because he signed the only commit to arch/x86/lib/atomic64_32.c during the last year and he meets the other default qualifications. --git-min-percent (default:10) --git-min-signatures (default:1) If current users of ./scripts/get_maintainers.pl have scripts that use --nogit that expect git history to be excluded, those scripts should be updated to include --nogit-fallback or a .get_maintainer.conf file should be created with --nogit-fallback. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 77f4f2e4cd8..f46576949cc 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -24,9 +24,10 @@ my $email_maintainer = 1; my $email_list = 1; my $email_subscriber_list = 0; my $email_git_penguin_chiefs = 0; -my $email_git = 1; +my $email_git = 0; my $email_git_all_signature_types = 0; my $email_git_blame = 0; +my $email_git_fallback = 1; my $email_git_min_signatures = 1; my $email_git_max_maintainers = 5; my $email_git_min_percent = 5; @@ -138,6 +139,7 @@ if (!GetOptions( 'git!' => \$email_git, 'git-all-signature-types!' => \$email_git_all_signature_types, 'git-blame!' => \$email_git_blame, + 'git-fallback!' => \$email_git_fallback, 'git-chief-penguins!' => \$email_git_penguin_chiefs, 'git-min-signatures=i' => \$email_git_min_signatures, 'git-max-maintainers=i' => \$email_git_max_maintainers, @@ -371,6 +373,7 @@ my @status = (); foreach my $file (@files) { my %hash; + my $exact_pattern_match = 0; my $tvi = find_first_section(); while ($tvi < @typevalue) { my $start = find_starting_index($tvi); @@ -405,6 +408,8 @@ foreach my $file (@files) { my $value_pd = ($value =~ tr@/@@); my $file_pd = ($file =~ tr@/@@); $value_pd++ if (substr($value,-1,1) ne "/"); + $value_pd = -1 if ($value =~ /^\.\*/); + $exact_pattern_match = 1 if ($value_pd >= $file_pd); if ($pattern_depth == 0 || (($file_pd - $value_pd) < $pattern_depth)) { $hash{$tvi} = $value_pd; @@ -439,7 +444,8 @@ foreach my $file (@files) { } } - if ($email && $email_git) { + if ($email && + ($email_git || ($email_git_fallback && !$exact_pattern_match))) { vcs_file_signoffs($file); } @@ -540,6 +546,7 @@ MAINTAINER field selection options: --git => include recent git \*-by: signers --git-all-signature-types => include signers regardless of signature type or use only ${signaturePattern} signers (default: $email_git_all_signature_types) + --git-fallback => use git when no exact MAINTAINERS pattern (default: $email_git_fallback) --git-chief-penguins => include ${penguin_chiefs} --git-min-signatures => number of signatures required (default: $email_git_min_signatures) --git-max-maintainers => maximum maintainers to add (default: $email_git_max_maintainers) -- cgit v1.2.3-70-g09d2 From bcde44ed7d2a58733efdf04b5392c027d1348bac Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:53 -0700 Subject: scripts/get_maintainer.pl: use .get_maintainer.conf from . then $HOME then scripts On Mon, 2010-09-13 at 00:01 -0400, Valdis.Kletnieks@vt.edu wrote: > Any chance of getting that to be ~/.get_maintainer.conf rather than > ./.get_maintainer.conf? I've just gotten bit like the 3rd or 4th time by > "oh but you didn't create that file in *this* tree" > (I usually have a linus git tree, a linux-next tree, and 3-4 -mm trees) Sure. Add a search path for the .conf file. 3 paths are added: . customized per-tree configurations $HOME user global configuration when per-tree configs don't exist ./scripts lk defaults to override script Signed-off-by: Joe Perches Cc: Valdis Kletnieks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index f46576949cc..e5a400c53bf 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -110,10 +110,12 @@ my %VCS_cmds_hg = ( "blame_commit_pattern" => "^([0-9a-f]+):" ); -if (-f "${lk_path}.get_maintainer.conf") { +my $conf = which_conf(".get_maintainer.conf"); +if (-f $conf) { my @conf_args; - open(my $conffile, '<', "${lk_path}.get_maintainer.conf") - or warn "$P: Can't open .get_maintainer.conf: $!\n"; + open(my $conffile, '<', "$conf") + or warn "$P: Can't find a readable .get_maintainer.conf file $!\n"; + while (<$conffile>) { my $line = $_; @@ -961,6 +963,18 @@ sub which { return ""; } +sub which_conf { + my ($conf) = @_; + + foreach my $path (split(/:/, ".:$ENV{HOME}:.scripts")) { + if (-e "$path/$conf") { + return "$path/$conf"; + } + } + + return ""; +} + sub mailmap { my (@lines) = @_; my %hash; -- cgit v1.2.3-70-g09d2 From dace8e300d6820c2842de750d12b498a743bcfe5 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Tue, 26 Oct 2010 14:22:54 -0700 Subject: scripts/get_maintainer.pl: add interactive mode This is a first version of an interactive mode for scripts/get_maintainer.pl. It allows the user to interact with the script. Each cc candidate can be selected and deselected and a shortlog of authored commits can be displayed for each candidate. The menu is displayed via STDERR, the end result is outputted to STDOUT. This unusual mechanism allows using get_maintainer.pl in interactive mode via git send-email --cc-cmd. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 146 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 141 insertions(+), 5 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index e5a400c53bf..1ae8c50f190 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -33,6 +33,7 @@ my $email_git_max_maintainers = 5; my $email_git_min_percent = 5; my $email_git_since = "1-year-ago"; my $email_hg_since = "-365"; +my $interactive = 0; my $email_remove_duplicates = 1; my $output_multiline = 1; my $output_separator = ", "; @@ -52,6 +53,8 @@ my $help = 0; my $exit = 0; +my %shortlog_buffer; + my @penguin_chief = (); push(@penguin_chief, "Linus Torvalds:torvalds\@linux-foundation.org"); #Andrew wants in on most everything - 2009/01/14 @@ -93,7 +96,8 @@ my %VCS_cmds_git = ( "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", - "blame_commit_pattern" => "^([0-9a-f]+) " + "blame_commit_pattern" => "^([0-9a-f]+) ", + "shortlog_cmd" => "git log --no-color --oneline --since=\$email_git_since --author=\"\$email\" -- \$file" ); my %VCS_cmds_hg = ( @@ -107,7 +111,8 @@ my %VCS_cmds_hg = ( "blame_range_cmd" => "", # not supported "blame_file_cmd" => "hg blame -c \$file", "commit_pattern" => "^commit [0-9a-f]{40,40}", - "blame_commit_pattern" => "^([0-9a-f]+):" + "blame_commit_pattern" => "^([0-9a-f]+):", + "shortlog_cmd" => "ht log --date=\$email_hg_since" ); my $conf = which_conf(".get_maintainer.conf"); @@ -148,6 +153,7 @@ if (!GetOptions( 'git-min-percent=i' => \$email_git_min_percent, 'git-since=s' => \$email_git_since, 'hg-since=s' => \$email_hg_since, + 'i|interactive!' => \$interactive, 'remove-duplicates!' => \$email_remove_duplicates, 'm!' => \$email_maintainer, 'n!' => \$email_usename, @@ -225,6 +231,8 @@ if ($email_git_all_signature_types) { $signaturePattern = "(.+?)[Bb][Yy]:"; } + + ## Read MAINTAINERS for type/value pairs my @typevalue = (); @@ -450,10 +458,13 @@ foreach my $file (@files) { ($email_git || ($email_git_fallback && !$exact_pattern_match))) { vcs_file_signoffs($file); } - if ($email && $email_git_blame) { vcs_file_blame($file); } + if ($email && $interactive){ + vcs_file_shortlogs($file); + + } } if ($keywords) { @@ -486,9 +497,13 @@ if ($email) { } } + if ($email || $email_list) { my @to = (); if ($email) { + if ($interactive) { + @email_to = @{vcs_interactive_menu(\@email_to)}; + } @to = (@to, @email_to); } if ($email_list) { @@ -501,7 +516,6 @@ if ($scm) { @scm = uniq(@scm); output(@scm); } - if ($status) { @status = uniq(@status); output(@status); @@ -556,6 +570,7 @@ MAINTAINER field selection options: --git-blame => use git blame to find modified commits for patch or file --git-since => git history to use (default: $email_git_since) --hg-since => hg history to use (default: $email_hg_since) + --interactive => display a menu (mostly useful if used with the --git option) --m => include maintainer(s) if any --n => include name 'Full Name ' --l => include list(s) if any @@ -1156,6 +1171,127 @@ sub vcs_exists { return 0; } +sub vcs_interactive_menu { + my $list_ref = shift; + my @list = @$list_ref; + + return if (!vcs_exists()); + + my %selected; + my %shortlog; + my $input; + my $count = 0; + + #select maintainers by default + foreach my $entry (@list){ + my $role = $entry->[1]; + $selected{$count} = ($role =~ /maintainer:|supporter:/); + $count++; + } + + #menu loop + do { + my $count = 0; + foreach my $entry (@list){ + my $email = $entry->[0]; + my $role = $entry->[1]; + if ($selected{$count}){ + print STDERR "* "; + } else { + print STDERR " "; + } + print STDERR "$count: $email,\t\t $role"; + print STDERR "\n"; + if ($shortlog{$count}){ + my $entries_ref = vcs_get_shortlog($email); + foreach my $entry_ref (@{$entries_ref}){ + my $filename = @{$entry_ref}[0]; + my @shortlog = @{@{$entry_ref}[1]}; + print STDERR "\tshortlog for $filename (authored commits: " . @shortlog . ").\n"; + foreach my $commit (@shortlog){ + print STDERR "\t $commit\n"; + } + print STDERR "\n"; + } + } + $count++; + } + print STDERR "\n"; + print STDERR "Choose whom to cc by entering a commaseperated list of numbers and hitting enter.\n"; + print STDERR "To show a short list of commits, precede the number by a '?',\n"; + print STDERR "A blank line indicates that you are satisfied with your choice.\n"; + $input = ; + chomp($input); + + my @wish = split(/[, ]+/,$input); + foreach my $nr (@wish){ + my $logtoggle = 0; + if ($nr =~ /\?/){ + $nr =~ s/\?//; + $logtoggle = 1; + } + + #skip out of bounds numbers + next unless ($nr <= $count && $nr >= 0); + + if ($logtoggle){ + $shortlog{$nr} = !$shortlog{$nr}; + } else { + $selected{$nr} = !$selected{$nr}; + + #switch shortlog on if an entry get's selected + if ($selected{$nr}){ + $shortlog{$nr}=1; + } + } + }; + } while(length($input) > 0); + + #drop not selected entries + $count = 0; + my @new_emailto; + foreach my $entry (@list){ + if ($selected{$count}){ + push(@new_emailto,$list[$count]); + print STDERR "$count: "; + print STDERR $email_to[$count]->[0]; + print STDERR ",\t\t "; + print STDERR $email_to[$count]->[1]; + print STDERR "\n"; + } + $count++; + } + return \@new_emailto; +} + +sub vcs_get_shortlog { + my $arg = shift; + my ($name, $address) = parse_email($arg); + return $shortlog_buffer{$address}; +} + +sub vcs_file_shortlogs { + my ($file) = @_; + print STDERR "shortlog processing $file:"; + foreach my $entry (@email_to){ + my ($name, $address) = parse_email($entry->[0]); + print STDERR "."; + my $commits_ref = vcs_email_shortlog($address, $file); + push(@{$shortlog_buffer{$address}}, [ $file, $commits_ref ]); + } + print STDERR "\n"; +} + +sub vcs_email_shortlog { + my $email = shift; + my ($file) = @_; + + my $cmd = $VCS_cmds{"shortlog_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables + my @lines = &{$VCS_cmds{"execute_cmd"}}($cmd); + return \@lines; +} + sub vcs_assign { my ($role, $divisor, @lines) = @_; @@ -1236,7 +1372,7 @@ sub vcs_file_blame { my @commit_signers = (); my $cmd = $VCS_cmds{"find_commit_signers_cmd"}; - $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd + $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables in $cmd ($commit_count, @commit_signers) = vcs_find_signers($cmd); -- cgit v1.2.3-70-g09d2 From 683c6f8fcbcb6de8d07545ba70aff49e50d8bcf2 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:55 -0700 Subject: scripts/get_maintainer.pl: improve --interactive UI o Added searching by git-blame as well as git-history o Added different selection toggles o Added ability to list commits by author or by sign-off-type o Use custom git and hg formats to make searching for subject/author a bit easier. o Move inlined section matching and searching git/hg history to new get_maintainer subroutine o Added subroutines save_commits_by_author and save_commits_by_signer o Removed subroutines vcs_get_shortlog and vcs_email_shortlog o Rename camelcase signaturePattern to signature_pattern Update to 0.26 beta3 Signed-off-by: Joe Perches Cc: Florian Mickler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 871 +++++++++++++++++++++++++++++++--------------- 1 file changed, 596 insertions(+), 275 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 1ae8c50f190..f51176039ff 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.25'; +my $V = '0.26-beta3'; use Getopt::Long qw(:config no_auto_abbrev); @@ -27,6 +27,7 @@ my $email_git_penguin_chiefs = 0; my $email_git = 0; my $email_git_all_signature_types = 0; my $email_git_blame = 0; +my $email_git_blame_signatures = 1; my $email_git_fallback = 1; my $email_git_min_signatures = 1; my $email_git_max_maintainers = 5; @@ -51,9 +52,12 @@ my $pattern_depth = 0; my $version = 0; my $help = 0; +my $vcs_used = 0; + my $exit = 0; -my %shortlog_buffer; +my %commit_author_hash; +my %commit_signer_hash; my @penguin_chief = (); push(@penguin_chief, "Linus Torvalds:torvalds\@linux-foundation.org"); @@ -77,7 +81,6 @@ my @signature_tags = (); push(@signature_tags, "Signed-off-by:"); push(@signature_tags, "Reviewed-by:"); push(@signature_tags, "Acked-by:"); -my $signaturePattern = "\(" . join("|", @signature_tags) . "\)"; # rfc822 email address - preloaded methods go here. my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])"; @@ -90,29 +93,62 @@ my %VCS_cmds; my %VCS_cmds_git = ( "execute_cmd" => \&git_execute_cmd, "available" => '(which("git") ne "") && (-d ".git")', - "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file", - "find_commit_signers_cmd" => "git log --no-color -1 \$commit", - "find_commit_author_cmd" => "git log -1 --format=\"%an <%ae>\" \$commit", + "find_signers_cmd" => + "git log --no-color --since=\$email_git_since " . + '--format="GitCommit: %H%n' . + 'GitAuthor: %an <%ae>%n' . + 'GitDate: %aD%n' . + 'GitSubject: %s%n' . + '%b%n"' . + " -- \$file", + "find_commit_signers_cmd" => + "git log --no-color " . + '--format="GitCommit: %H%n' . + 'GitAuthor: %an <%ae>%n' . + 'GitDate: %aD%n' . + 'GitSubject: %s%n' . + '%b%n"' . + " -1 \$commit", + "find_commit_author_cmd" => + "git log --no-color " . + '--format="GitCommit: %H%n' . + 'GitAuthor: %an <%ae>%n' . + 'GitDate: %aD%n' . + 'GitSubject: %s%n"' . + " -1 \$commit", "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file", "blame_file_cmd" => "git blame -l \$file", - "commit_pattern" => "^commit [0-9a-f]{40,40}", + "commit_pattern" => "^GitCommit: ([0-9a-f]{40,40})", "blame_commit_pattern" => "^([0-9a-f]+) ", - "shortlog_cmd" => "git log --no-color --oneline --since=\$email_git_since --author=\"\$email\" -- \$file" + "author_pattern" => "^GitAuthor: (.*)", + "subject_pattern" => "^GitSubject: (.*)", ); my %VCS_cmds_hg = ( "execute_cmd" => \&hg_execute_cmd, "available" => '(which("hg") ne "") && (-d ".hg")', "find_signers_cmd" => - "hg log --date=\$email_hg_since" . - " --template='commit {node}\\n{desc}\\n' -- \$file", - "find_commit_signers_cmd" => "hg log --template='{desc}\\n' -r \$commit", - "find_commit_author_cmd" => "hg log -l 1 --template='{author}\\n' -r \$commit", + "hg log --date=\$email_hg_since " . + "--template='HgCommit: {node}\\n" . + "HgAuthor: {author}\\n" . + "HgSubject: {desc}\\n'" . + " -- \$file", + "find_commit_signers_cmd" => + "hg log " . + "--template='HgSubject: {desc}\\n'" . + " -r \$commit", + "find_commit_author_cmd" => + "hg log " . + "--template='HgCommit: {node}\\n" . + "HgAuthor: {author}\\n" . + "HgSubject: {desc|firstline}\\n'" . + " -r \$commit", "blame_range_cmd" => "", # not supported - "blame_file_cmd" => "hg blame -c \$file", - "commit_pattern" => "^commit [0-9a-f]{40,40}", - "blame_commit_pattern" => "^([0-9a-f]+):", - "shortlog_cmd" => "ht log --date=\$email_hg_since" + "blame_file_cmd" => "hg blame -n \$file", + "commit_pattern" => "^HgCommit: ([0-9a-f]{40,40})", + "blame_commit_pattern" => "^([ 0-9a-f]+):", + "author_pattern" => "^HgAuthor: (.*)", + "subject_pattern" => "^HgSubject: (.*)", ); my $conf = which_conf(".get_maintainer.conf"); @@ -146,6 +182,7 @@ if (!GetOptions( 'git!' => \$email_git, 'git-all-signature-types!' => \$email_git_all_signature_types, 'git-blame!' => \$email_git_blame, + 'git-blame-signatures!' => \$email_git_blame_signatures, 'git-fallback!' => \$email_git_fallback, 'git-chief-penguins!' => \$email_git_penguin_chiefs, 'git-min-signatures=i' => \$email_git_min_signatures, @@ -193,13 +230,9 @@ if (-t STDIN && !@ARGV) { die "$P: missing patchfile or -f file - use --help if necessary\n"; } -if ($output_separator ne ", ") { - $output_multiline = 0; -} - -if ($output_rolestats) { - $output_roles = 1; -} +$output_multiline = 0 if ($output_separator ne ", "); +$output_rolestats = 1 if ($interactive); +$output_roles = 1 if ($output_rolestats); if ($sections) { $email = 0; @@ -227,12 +260,6 @@ if (!top_of_kernel_tree($lk_path)) { . "a linux kernel source tree.\n"; } -if ($email_git_all_signature_types) { - $signaturePattern = "(.+?)[Bb][Yy]:"; -} - - - ## Read MAINTAINERS for type/value pairs my @typevalue = (); @@ -371,168 +398,193 @@ foreach my $file (@ARGV) { @file_emails = uniq(@file_emails); +my %email_hash_name; +my %email_hash_address; my @email_to = (); +my %hash_list_to; my @list_to = (); my @scm = (); my @web = (); my @subsystem = (); my @status = (); +my $signature_pattern; -# Find responsible parties +my @to = get_maintainer(); -foreach my $file (@files) { +@to = merge_email(@to); - my %hash; - my $exact_pattern_match = 0; - my $tvi = find_first_section(); - while ($tvi < @typevalue) { - my $start = find_starting_index($tvi); - my $end = find_ending_index($tvi); - my $exclude = 0; - my $i; - - #Do not match excluded file patterns - - for ($i = $start; $i < $end; $i++) { - my $line = $typevalue[$i]; - if ($line =~ m/^(\C):\s*(.*)/) { - my $type = $1; - my $value = $2; - if ($type eq 'X') { - if (file_match_pattern($file, $value)) { - $exclude = 1; - last; - } - } - } - } +output(@to) if (@to); + +if ($scm) { + @scm = uniq(@scm); + output(@scm); +} + +if ($status) { + @status = uniq(@status); + output(@status); +} + +if ($subsystem) { + @subsystem = uniq(@subsystem); + output(@subsystem); +} + +if ($web) { + @web = uniq(@web); + output(@web); +} + +exit($exit); + +sub get_maintainer { + %email_hash_name = (); + %email_hash_address = (); + %commit_author_hash = (); + %commit_signer_hash = (); + @email_to = (); + %hash_list_to = (); + @list_to = (); + @scm = (); + @web = (); + @subsystem = (); + @status = (); + + if ($email_git_all_signature_types) { + $signature_pattern = "(.+?)[Bb][Yy]:"; + } else { + $signature_pattern = "\(" . join("|", @signature_tags) . "\)"; + } + + # Find responsible parties + + foreach my $file (@files) { + + my %hash; + my $exact_pattern_match = 0; + my $tvi = find_first_section(); + while ($tvi < @typevalue) { + my $start = find_starting_index($tvi); + my $end = find_ending_index($tvi); + my $exclude = 0; + my $i; + + #Do not match excluded file patterns - if (!$exclude) { for ($i = $start; $i < $end; $i++) { my $line = $typevalue[$i]; if ($line =~ m/^(\C):\s*(.*)/) { my $type = $1; my $value = $2; - if ($type eq 'F') { + if ($type eq 'X') { if (file_match_pattern($file, $value)) { - my $value_pd = ($value =~ tr@/@@); - my $file_pd = ($file =~ tr@/@@); - $value_pd++ if (substr($value,-1,1) ne "/"); - $value_pd = -1 if ($value =~ /^\.\*/); - $exact_pattern_match = 1 if ($value_pd >= $file_pd); - if ($pattern_depth == 0 || - (($file_pd - $value_pd) < $pattern_depth)) { - $hash{$tvi} = $value_pd; + $exclude = 1; + last; + } + } + } + } + + if (!$exclude) { + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; + if ($line =~ m/^(\C):\s*(.*)/) { + my $type = $1; + my $value = $2; + if ($type eq 'F') { + if (file_match_pattern($file, $value)) { + my $value_pd = ($value =~ tr@/@@); + my $file_pd = ($file =~ tr@/@@); + $value_pd++ if (substr($value,-1,1) ne "/"); + $value_pd = -1 if ($value =~ /^\.\*/); + $exact_pattern_match = 1 if ($value_pd >= $file_pd); + if ($pattern_depth == 0 || + (($file_pd - $value_pd) < $pattern_depth)) { + $hash{$tvi} = $value_pd; + } } } } } } + $tvi = $end + 1; } - $tvi = $end + 1; - } - - foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { - add_categories($line); - if ($sections) { - my $i; - my $start = find_starting_index($line); - my $end = find_ending_index($line); - for ($i = $start; $i < $end; $i++) { - my $line = $typevalue[$i]; - if ($line =~ /^[FX]:/) { ##Restore file patterns - $line =~ s/([^\\])\.([^\*])/$1\?$2/g; - $line =~ s/([^\\])\.$/$1\?/g; ##Convert . back to ? - $line =~ s/\\\./\./g; ##Convert \. to . - $line =~ s/\.\*/\*/g; ##Convert .* to * + foreach my $line (sort {$hash{$b} <=> $hash{$a}} keys %hash) { + add_categories($line); + if ($sections) { + my $i; + my $start = find_starting_index($line); + my $end = find_ending_index($line); + for ($i = $start; $i < $end; $i++) { + my $line = $typevalue[$i]; + if ($line =~ /^[FX]:/) { ##Restore file patterns + $line =~ s/([^\\])\.([^\*])/$1\?$2/g; + $line =~ s/([^\\])\.$/$1\?/g; ##Convert . back to ? + $line =~ s/\\\./\./g; ##Convert \. to . + $line =~ s/\.\*/\*/g; ##Convert .* to * + } + $line =~ s/^([A-Z]):/$1:\t/g; + print("$line\n"); } - $line =~ s/^([A-Z]):/$1:\t/g; - print("$line\n"); + print("\n"); } - print("\n"); } - } - - if ($email && - ($email_git || ($email_git_fallback && !$exact_pattern_match))) { - vcs_file_signoffs($file); - } - if ($email && $email_git_blame) { - vcs_file_blame($file); - } - if ($email && $interactive){ - vcs_file_shortlogs($file); + if ($email && ($email_git || + ($email_git_fallback && !$exact_pattern_match))) { + vcs_file_signoffs($file); + } + if ($email && $email_git_blame) { + vcs_file_blame($file); + } } -} -if ($keywords) { - @keyword_tvi = sort_and_uniq(@keyword_tvi); - foreach my $line (@keyword_tvi) { - add_categories($line); + if ($keywords) { + @keyword_tvi = sort_and_uniq(@keyword_tvi); + foreach my $line (@keyword_tvi) { + add_categories($line); + } } -} -if ($email) { - foreach my $chief (@penguin_chief) { - if ($chief =~ m/^(.*):(.*)/) { - my $email_address; + if ($email) { + foreach my $chief (@penguin_chief) { + if ($chief =~ m/^(.*):(.*)/) { + my $email_address; - $email_address = format_email($1, $2, $email_usename); - if ($email_git_penguin_chiefs) { - push(@email_to, [$email_address, 'chief penguin']); - } else { - @email_to = grep($_->[0] !~ /${email_address}/, @email_to); + $email_address = format_email($1, $2, $email_usename); + if ($email_git_penguin_chiefs) { + push(@email_to, [$email_address, 'chief penguin']); + } else { + @email_to = grep($_->[0] !~ /${email_address}/, @email_to); + } } } - } - foreach my $email (@file_emails) { - my ($name, $address) = parse_email($email); + foreach my $email (@file_emails) { + my ($name, $address) = parse_email($email); - my $tmp_email = format_email($name, $address, $email_usename); - push_email_address($tmp_email, ''); - add_role($tmp_email, 'in file'); + my $tmp_email = format_email($name, $address, $email_usename); + push_email_address($tmp_email, ''); + add_role($tmp_email, 'in file'); + } } -} - -if ($email || $email_list) { my @to = (); - if ($email) { - if ($interactive) { - @email_to = @{vcs_interactive_menu(\@email_to)}; + if ($email || $email_list) { + if ($email) { + @to = (@to, @email_to); + } + if ($email_list) { + @to = (@to, @list_to); } - @to = (@to, @email_to); - } - if ($email_list) { - @to = (@to, @list_to); } - output(merge_email(@to)); -} -if ($scm) { - @scm = uniq(@scm); - output(@scm); -} -if ($status) { - @status = uniq(@status); - output(@status); -} + @to = interactive_get_maintainer(\@to) if ($interactive); -if ($subsystem) { - @subsystem = uniq(@subsystem); - output(@subsystem); + return @to; } -if ($web) { - @web = uniq(@web); - output(@web); -} - -exit($exit); - sub file_match_pattern { my ($file, $pattern) = @_; if (substr($pattern, -1) eq "/") { @@ -561,7 +613,7 @@ MAINTAINER field selection options: --email => print email address(es) if any --git => include recent git \*-by: signers --git-all-signature-types => include signers regardless of signature type - or use only ${signaturePattern} signers (default: $email_git_all_signature_types) + or use only ${signature_pattern} signers (default: $email_git_all_signature_types) --git-fallback => use git when no exact MAINTAINERS pattern (default: $email_git_fallback) --git-chief-penguins => include ${penguin_chiefs} --git-min-signatures => number of signatures required (default: $email_git_min_signatures) @@ -847,11 +899,19 @@ sub add_categories { } if ($list_additional =~ m/subscribers-only/) { if ($email_subscriber_list) { - push(@list_to, [$list_address, "subscriber list${list_role}"]); + if (!$hash_list_to{$list_address}) { + $hash_list_to{$list_address} = 1; + push(@list_to, [$list_address, + "subscriber list${list_role}"]); + } } } else { if ($email_list) { - push(@list_to, [$list_address, "open list${list_role}"]); + if (!$hash_list_to{$list_address}) { + $hash_list_to{$list_address} = 1; + push(@list_to, [$list_address, + "open list${list_role}"]); + } } } } elsif ($ptype eq "M") { @@ -882,9 +942,6 @@ sub add_categories { } } -my %email_hash_name; -my %email_hash_address; - sub email_inuse { my ($name, $address) = @_; @@ -1037,10 +1094,31 @@ sub hg_execute_cmd { return @lines; } +sub extract_formatted_signatures { + my (@signature_lines) = @_; + + my @type = @signature_lines; + + s/\s*(.*):.*/$1/ for (@type); + + # cut -f2- -d":" + s/\s*.*:\s*(.+)\s*/$1/ for (@signature_lines); + +## Reformat email addresses (with names) to avoid badly written signatures + + foreach my $signer (@signature_lines) { + my ($name, $address) = parse_email($signer); + $signer = format_email($name, $address, 1); + } + + return (\@type, \@signature_lines); +} + sub vcs_find_signers { my ($cmd) = @_; - my @lines = (); my $commits; + my @lines = (); + my @signatures = (); @lines = &{$VCS_cmds{"execute_cmd"}}($cmd); @@ -1048,24 +1126,20 @@ sub vcs_find_signers { $commits = grep(/$pattern/, @lines); # of commits - @lines = grep(/^[ \t]*${signaturePattern}.*\@.*$/, @lines); - if (!$email_git_penguin_chiefs) { - @lines = grep(!/${penguin_chiefs}/i, @lines); - } + @signatures = grep(/^[ \t]*${signature_pattern}.*\@.*$/, @lines); - return (0, @lines) if !@lines; + return (0, @signatures) if !@signatures; - # cut -f2- -d":" - s/.*:\s*(.+)\s*/$1/ for (@lines); + save_commits_by_author(@lines) if ($interactive); + save_commits_by_signer(@lines) if ($interactive); -## Reformat email addresses (with names) to avoid badly written signatures - - foreach my $line (@lines) { - my ($name, $address) = parse_email($line); - $line = format_email($name, $address, 1); + if (!$email_git_penguin_chiefs) { + @signatures = grep(!/${penguin_chiefs}/i, @signatures); } - return ($commits, @lines); + my ($types_ref, $signers_ref) = extract_formatted_signatures(@signatures); + + return ($commits, @$signers_ref); } sub vcs_find_author { @@ -1080,14 +1154,20 @@ sub vcs_find_author { return @lines if !@lines; -## Reformat email addresses (with names) to avoid badly written signatures - + my @authors = (); foreach my $line (@lines) { - my ($name, $address) = parse_email($line); - $line = format_email($name, $address, 1); + if ($line =~ m/$VCS_cmds{"author_pattern"}/) { + my $author = $1; + my ($name, $address) = parse_email($author); + $author = format_email($name, $address, 1); + push(@authors, $author); + } } - return @lines; + save_commits_by_author(@lines) if ($interactive); + save_commits_by_signer(@lines) if ($interactive); + + return @authors; } sub vcs_save_commits { @@ -1159,7 +1239,7 @@ sub vcs_exists { %VCS_cmds = %VCS_cmds_git; return 1 if eval $VCS_cmds{"available"}; %VCS_cmds = %VCS_cmds_hg; - return 1 if eval $VCS_cmds{"available"}; + return 2 if eval $VCS_cmds{"available"}; %VCS_cmds = (); if (!$printed_novcs) { warn("$P: No supported VCS found. Add --nogit to options?\n"); @@ -1171,125 +1251,309 @@ sub vcs_exists { return 0; } -sub vcs_interactive_menu { - my $list_ref = shift; +sub vcs_is_git { + return $vcs_used == 1; +} + +sub vcs_is_hg { + return $vcs_used == 2; +} + +sub interactive_get_maintainer { + my ($list_ref) = @_; my @list = @$list_ref; - return if (!vcs_exists()); + vcs_exists(); my %selected; - my %shortlog; - my $input; + my %authored; + my %signed; my $count = 0; #select maintainers by default foreach my $entry (@list){ - my $role = $entry->[1]; - $selected{$count} = ($role =~ /maintainer:|supporter:/); - $count++; + my $role = $entry->[1]; + $selected{$count} = ($role =~ /^(maintainer|supporter|open list)/); + $authored{$count} = 0; + $signed{$count} = 0; + $count++; } #menu loop - do { - my $count = 0; - foreach my $entry (@list){ - my $email = $entry->[0]; - my $role = $entry->[1]; - if ($selected{$count}){ - print STDERR "* "; - } else { - print STDERR " "; - } - print STDERR "$count: $email,\t\t $role"; - print STDERR "\n"; - if ($shortlog{$count}){ - my $entries_ref = vcs_get_shortlog($email); - foreach my $entry_ref (@{$entries_ref}){ - my $filename = @{$entry_ref}[0]; - my @shortlog = @{@{$entry_ref}[1]}; - print STDERR "\tshortlog for $filename (authored commits: " . @shortlog . ").\n"; - foreach my $commit (@shortlog){ - print STDERR "\t $commit\n"; + my $done = 0; + my $print_options = 0; + my $redraw = 1; + while (!$done) { + $count = 0; + if ($redraw) { + printf STDERR "\n%1s %2s %-65sauth sign\n", + "*", "#", "email/list and role:stats"; + foreach my $entry (@list) { + my $email = $entry->[0]; + my $role = $entry->[1]; + my $sel = ""; + $sel = "*" if ($selected{$count}); + my $commit_author = $commit_author_hash{$email}; + my $commit_signer = $commit_signer_hash{$email}; + my $authored = 0; + my $signed = 0; + $authored++ for (@{$commit_author}); + $signed++ for (@{$commit_signer}); + printf STDERR "%1s %2d %-65s", $sel, $count + 1, $email; + printf STDERR "%4d %4d", $authored, $signed + if ($authored > 0 || $signed > 0); + printf STDERR "\n %s\n", $role; + if ($authored{$count}) { + my $commit_author = $commit_author_hash{$email}; + foreach my $ref (@{$commit_author}) { + print STDERR " Author: @{$ref}[1]\n"; } - print STDERR "\n"; } + if ($signed{$count}) { + my $commit_signer = $commit_signer_hash{$email}; + foreach my $ref (@{$commit_signer}) { + print STDERR " @{$ref}[2]: @{$ref}[1]\n"; + } + } + + $count++; } - $count++; } - print STDERR "\n"; - print STDERR "Choose whom to cc by entering a commaseperated list of numbers and hitting enter.\n"; - print STDERR "To show a short list of commits, precede the number by a '?',\n"; - print STDERR "A blank line indicates that you are satisfied with your choice.\n"; - $input = ; + my $date_ref = \$email_git_since; + $date_ref = \$email_hg_since if (vcs_is_hg()); + if ($print_options) { + $print_options = 0; + if (vcs_exists()) { + print STDERR +"\nVersion Control options:\n" . +"g use git history [$email_git]\n" . +"gf use git-fallback [$email_git_fallback]\n" . +"b use git blame [$email_git_blame]\n" . +"bs use blame signatures [$email_git_blame_signatures]\n" . +"c# minimum commits [$email_git_min_signatures]\n" . +"%# min percent [$email_git_min_percent]\n" . +"d# history to use [$$date_ref]\n" . +"x# max maintainers [$email_git_max_maintainers]\n" . +"t all signature types [$email_git_all_signature_types]\n"; + } + print STDERR "\nAdditional options:\n" . +"0 toggle all\n" . +"f emails in file [$file_emails]\n" . +"k keywords in file [$keywords]\n" . +"r remove duplicates [$email_remove_duplicates]\n" . +"p# pattern match depth [$pattern_depth]\n"; + } + print STDERR +"\n#(toggle), A#(author), S#(signed) *(all), ^(none), O(options), Y(approve): "; + + my $input = ; chomp($input); - my @wish = split(/[, ]+/,$input); - foreach my $nr (@wish){ - my $logtoggle = 0; - if ($nr =~ /\?/){ - $nr =~ s/\?//; - $logtoggle = 1; + $redraw = 1; + my $rerun = 0; + my @wish = split(/[, ]+/, $input); + foreach my $nr (@wish) { + $nr = lc($nr); + my $sel = substr($nr, 0, 1); + my $str = substr($nr, 1); + my $val = 0; + $val = $1 if $str =~ /^(\d+)$/; + + if ($sel eq "y") { + $interactive = 0; + $done = 1; + $output_rolestats = 0; + $output_roles = 0; + last; + } elsif ($nr =~ /^\d+$/ && $nr > 0 && $nr <= $count) { + $selected{$nr - 1} = !$selected{$nr - 1}; + } elsif ($sel eq "*" || $sel eq '^') { + my $toggle = 0; + $toggle = 1 if ($sel eq '*'); + for (my $i = 0; $i < $count; $i++) { + $selected{$i} = $toggle; } - - #skip out of bounds numbers - next unless ($nr <= $count && $nr >= 0); - - if ($logtoggle){ - $shortlog{$nr} = !$shortlog{$nr}; + } elsif ($sel eq "0") { + for (my $i = 0; $i < $count; $i++) { + $selected{$i} = !$selected{$i}; + } + } elsif ($sel eq "a") { + if ($val > 0 && $val <= $count) { + $authored{$val - 1} = !$authored{$val - 1}; + } elsif ($str eq '*' || $str eq '^') { + my $toggle = 0; + $toggle = 1 if ($str eq '*'); + for (my $i = 0; $i < $count; $i++) { + $authored{$i} = $toggle; + } + } + } elsif ($sel eq "s") { + if ($val > 0 && $val <= $count) { + $signed{$val - 1} = !$signed{$val - 1}; + } elsif ($str eq '*' || $str eq '^') { + my $toggle = 0; + $toggle = 1 if ($str eq '*'); + for (my $i = 0; $i < $count; $i++) { + $signed{$i} = $toggle; + } + } + } elsif ($sel eq "o") { + $print_options = 1; + $redraw = 1; + } elsif ($sel eq "g") { + if ($str eq "f") { + bool_invert(\$email_git_fallback); } else { - $selected{$nr} = !$selected{$nr}; - - #switch shortlog on if an entry get's selected - if ($selected{$nr}){ - $shortlog{$nr}=1; - } + bool_invert(\$email_git); + } + $rerun = 1; + } elsif ($sel eq "b") { + if ($str eq "s") { + bool_invert(\$email_git_blame_signatures); + } else { + bool_invert(\$email_git_blame); + } + $rerun = 1; + } elsif ($sel eq "c") { + if ($val > 0) { + $email_git_min_signatures = $val; + $rerun = 1; + } + } elsif ($sel eq "x") { + if ($val > 0) { + $email_git_max_maintainers = $val; + $rerun = 1; + } + } elsif ($sel eq "%") { + if ($str ne "" && $val >= 0) { + $email_git_min_percent = $val; + $rerun = 1; } - }; - } while(length($input) > 0); + } elsif ($sel eq "d") { + if (vcs_is_git()) { + $email_git_since = $str; + } elsif (vcs_is_hg()) { + $email_hg_since = $str; + } + $rerun = 1; + } elsif ($sel eq "t") { + bool_invert(\$email_git_all_signature_types); + $rerun = 1; + } elsif ($sel eq "f") { + bool_invert(\$file_emails); + $rerun = 1; + } elsif ($sel eq "r") { + bool_invert(\$email_remove_duplicates); + $rerun = 1; + } elsif ($sel eq "k") { + bool_invert(\$keywords); + $rerun = 1; + } elsif ($sel eq "p") { + if ($str ne "" && $val >= 0) { + $pattern_depth = $val; + $rerun = 1; + } + } else { + print STDERR "invalid option: '$nr'\n"; + $redraw = 0; + } + } + if ($rerun) { + print STDERR "git-blame can be very slow, please have patience..." + if ($email_git_blame); + goto &get_maintainer; + } + } #drop not selected entries $count = 0; - my @new_emailto; - foreach my $entry (@list){ - if ($selected{$count}){ - push(@new_emailto,$list[$count]); - print STDERR "$count: "; - print STDERR $email_to[$count]->[0]; - print STDERR ",\t\t "; - print STDERR $email_to[$count]->[1]; - print STDERR "\n"; + my @new_emailto = (); + foreach my $entry (@list) { + if ($selected{$count}) { + push(@new_emailto, $list[$count]); } $count++; } - return \@new_emailto; + return @new_emailto; } -sub vcs_get_shortlog { - my $arg = shift; - my ($name, $address) = parse_email($arg); - return $shortlog_buffer{$address}; +sub bool_invert { + my ($bool_ref) = @_; + + if ($$bool_ref) { + $$bool_ref = 0; + } else { + $$bool_ref = 1; + } } -sub vcs_file_shortlogs { - my ($file) = @_; - print STDERR "shortlog processing $file:"; - foreach my $entry (@email_to){ - my ($name, $address) = parse_email($entry->[0]); - print STDERR "."; - my $commits_ref = vcs_email_shortlog($address, $file); - push(@{$shortlog_buffer{$address}}, [ $file, $commits_ref ]); +sub save_commits_by_author { + my (@lines) = @_; + + my @authors = (); + my @commits = (); + my @subjects = (); + + foreach my $line (@lines) { + if ($line =~ m/$VCS_cmds{"author_pattern"}/) { + my $author = $1; + my ($name, $address) = parse_email($author); + $author = format_email($name, $address, 1); + push(@authors, $author); + } + push(@commits, $1) if ($line =~ m/$VCS_cmds{"commit_pattern"}/); + push(@subjects, $1) if ($line =~ m/$VCS_cmds{"subject_pattern"}/); + } + + for (my $i = 0; $i < @authors; $i++) { + my $exists = 0; + foreach my $ref(@{$commit_author_hash{$authors[$i]}}) { + if (@{$ref}[0] eq $commits[$i] && + @{$ref}[1] eq $subjects[$i]) { + $exists = 1; + last; + } + } + if (!$exists) { + push(@{$commit_author_hash{$authors[$i]}}, + [ ($commits[$i], $subjects[$i]) ]); + } } - print STDERR "\n"; } -sub vcs_email_shortlog { - my $email = shift; - my ($file) = @_; +sub save_commits_by_signer { + my (@lines) = @_; + + my $commit = ""; + my $subject = ""; - my $cmd = $VCS_cmds{"shortlog_cmd"}; - $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables - my @lines = &{$VCS_cmds{"execute_cmd"}}($cmd); - return \@lines; + foreach my $line (@lines) { + $commit = $1 if ($line =~ m/$VCS_cmds{"commit_pattern"}/); + $subject = $1 if ($line =~ m/$VCS_cmds{"subject_pattern"}/); + if ($line =~ /^[ \t]*${signature_pattern}.*\@.*$/) { + my @signatures = ($line); + my ($types_ref, $signers_ref) = extract_formatted_signatures(@signatures); + my @types = @$types_ref; + my @signers = @$signers_ref; + + my $type = $types[0]; + my $signer = $signers[0]; + + my $exists = 0; + foreach my $ref(@{$commit_signer_hash{$signer}}) { + if (@{$ref}[0] eq $commit && + @{$ref}[1] eq $subject && + @{$ref}[2] eq $type) { + $exists = 1; + last; + } + } + if (!$exists) { + push(@{$commit_signer_hash{$signer}}, + [ ($commit, $subject, $type) ]); + } + } + } } sub vcs_assign { @@ -1342,7 +1606,8 @@ sub vcs_file_signoffs { my @signers = (); my $commits; - return if (!vcs_exists()); + $vcs_used = vcs_exists(); + return if (!$vcs_used); my $cmd = $VCS_cmds{"find_signers_cmd"}; $cmd =~ s/(\$\w+)/$1/eeg; # interpolate $cmd @@ -1360,37 +1625,93 @@ sub vcs_file_blame { my $total_commits; my $total_lines; - return if (!vcs_exists()); + $vcs_used = vcs_exists(); + return if (!$vcs_used); @all_commits = vcs_blame($file); @commits = uniq(@all_commits); $total_commits = @commits; $total_lines = @all_commits; - foreach my $commit (@commits) { - my $commit_count; - my @commit_signers = (); + if ($email_git_blame_signatures) { + if (vcs_is_hg()) { + my $commit_count; + my @commit_signers = (); + my $commit = join(" -r ", @commits); + my $cmd; - my $cmd = $VCS_cmds{"find_commit_signers_cmd"}; - $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables in $cmd + $cmd = $VCS_cmds{"find_commit_signers_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables in $cmd - ($commit_count, @commit_signers) = vcs_find_signers($cmd); + ($commit_count, @commit_signers) = vcs_find_signers($cmd); - push(@signers, @commit_signers); + push(@signers, @commit_signers); + } else { + foreach my $commit (@commits) { + my $commit_count; + my @commit_signers = (); + my $cmd; + + $cmd = $VCS_cmds{"find_commit_signers_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables in $cmd + + ($commit_count, @commit_signers) = vcs_find_signers($cmd); + + push(@signers, @commit_signers); + } + } } if ($from_filename) { if ($output_rolestats) { my @blame_signers; - foreach my $commit (@commits) { - my $i; - my $cmd = $VCS_cmds{"find_commit_author_cmd"}; - $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd - my @author = vcs_find_author($cmd); - next if !@author; - my $count = grep(/$commit/, @all_commits); - for ($i = 0; $i < $count ; $i++) { - push(@blame_signers, $author[0]); + if (vcs_is_hg()) {{ # Double brace for last exit + my $commit_count; + my @commit_signers = (); + @commits = uniq(@commits); + @commits = sort(@commits); + my $commit = join(" -r ", @commits); + my $cmd; + + $cmd = $VCS_cmds{"find_commit_author_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #substitute variables in $cmd + + my @lines = (); + + @lines = &{$VCS_cmds{"execute_cmd"}}($cmd); + + if (!$email_git_penguin_chiefs) { + @lines = grep(!/${penguin_chiefs}/i, @lines); + } + + last if !@lines; + + my @authors = (); + foreach my $line (@lines) { + if ($line =~ m/$VCS_cmds{"author_pattern"}/) { + my $author = $1; + my ($name, $address) = parse_email($author); + $author = format_email($name, $address, 1); + push(@authors, $1); + } + } + + save_commits_by_author(@lines) if ($interactive); + save_commits_by_signer(@lines) if ($interactive); + + push(@signers, @authors); + }} + else { + foreach my $commit (@commits) { + my $i; + my $cmd = $VCS_cmds{"find_commit_author_cmd"}; + $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd + my @author = vcs_find_author($cmd); + next if !@author; + my $count = grep(/$commit/, @all_commits); + for ($i = 0; $i < $count ; $i++) { + push(@blame_signers, $author[0]); + } } } if (@blame_signers) { -- cgit v1.2.3-70-g09d2 From 6ef1c52e122b675acc88a8b016d6477f67988b91 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:56 -0700 Subject: scripts/get_maintainer.pl: use case insensitive name de-duplication Case insensitive name and email address matching can help reduce duplication when authors don't always use the exact same signature. o Add a --interactive per-file exact_match hash so git history can be checked on per-file only when there is no direct maintainer o Make @interactive_to list global so save_commits_by_ can check email names & addresses against this list for duplication o Don't allow --interactive and --sections o rename subroutine get_maintainer to get_maintainers o Added help text option to --interactive menu prompt Update version to 0.26-beta4 Signed-off-by: Joe Perches Cc: Florian Mickler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 135 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 101 insertions(+), 34 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index f51176039ff..61d3bb51bdd 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.26-beta3'; +my $V = '0.26-beta4'; use Getopt::Long qw(:config no_auto_abbrev); @@ -242,6 +242,7 @@ if ($sections) { $subsystem = 0; $web = 0; $keywords = 0; + $interactive = 0; } else { my $selections = $email + $scm + $status + $subsystem + $web; if ($selections == 0) { @@ -407,13 +408,15 @@ my @scm = (); my @web = (); my @subsystem = (); my @status = (); +my @interactive_to = (); my $signature_pattern; -my @to = get_maintainer(); +my @maintainers = get_maintainers(); -@to = merge_email(@to); - -output(@to) if (@to); +if (@maintainers) { + @maintainers = merge_email(@maintainers); + output(@maintainers); +} if ($scm) { @scm = uniq(@scm); @@ -437,7 +440,7 @@ if ($web) { exit($exit); -sub get_maintainer { +sub get_maintainers { %email_hash_name = (); %email_hash_address = (); %commit_author_hash = (); @@ -449,7 +452,7 @@ sub get_maintainer { @web = (); @subsystem = (); @status = (); - + @interactive_to = (); if ($email_git_all_signature_types) { $signature_pattern = "(.+?)[Bb][Yy]:"; } else { @@ -458,10 +461,11 @@ sub get_maintainer { # Find responsible parties + my %exact_pattern_match_hash; + foreach my $file (@files) { my %hash; - my $exact_pattern_match = 0; my $tvi = find_first_section(); while ($tvi < @typevalue) { my $start = find_starting_index($tvi); @@ -497,7 +501,9 @@ sub get_maintainer { my $file_pd = ($file =~ tr@/@@); $value_pd++ if (substr($value,-1,1) ne "/"); $value_pd = -1 if ($value =~ /^\.\*/); - $exact_pattern_match = 1 if ($value_pd >= $file_pd); + if ($value_pd >= $file_pd) { + $exact_pattern_match_hash{$file} = 1; + } if ($pattern_depth == 0 || (($file_pd - $value_pd) < $pattern_depth)) { $hash{$tvi} = $value_pd; @@ -530,14 +536,6 @@ sub get_maintainer { print("\n"); } } - - if ($email && ($email_git || - ($email_git_fallback && !$exact_pattern_match))) { - vcs_file_signoffs($file); - } - if ($email && $email_git_blame) { - vcs_file_blame($file); - } } if ($keywords) { @@ -547,6 +545,19 @@ sub get_maintainer { } } + @interactive_to = (@email_to, @list_to); + + foreach my $file (@files) { + if ($email && + ($email_git || ($email_git_fallback && + !$exact_pattern_match_hash{$file}))) { + vcs_file_signoffs($file); + } + if ($email && $email_git_blame) { + vcs_file_blame($file); + } + } + if ($email) { foreach my $chief (@penguin_chief) { if ($chief =~ m/^(.*):(.*)/) { @@ -580,7 +591,10 @@ sub get_maintainer { } } - @to = interactive_get_maintainer(\@to) if ($interactive); + if ($interactive) { + @interactive_to = @to; + @to = interactive_get_maintainers(\@interactive_to); + } return @to; } @@ -899,16 +913,16 @@ sub add_categories { } if ($list_additional =~ m/subscribers-only/) { if ($email_subscriber_list) { - if (!$hash_list_to{$list_address}) { - $hash_list_to{$list_address} = 1; + if (!$hash_list_to{lc($list_address)}) { + $hash_list_to{lc($list_address)} = 1; push(@list_to, [$list_address, "subscriber list${list_role}"]); } } } else { if ($email_list) { - if (!$hash_list_to{$list_address}) { - $hash_list_to{$list_address} = 1; + if (!$hash_list_to{lc($list_address)}) { + $hash_list_to{lc($list_address)} = 1; push(@list_to, [$list_address, "open list${list_role}"]); } @@ -946,8 +960,8 @@ sub email_inuse { my ($name, $address) = @_; return 1 if (($name eq "") && ($address eq "")); - return 1 if (($name ne "") && exists($email_hash_name{$name})); - return 1 if (($address ne "") && exists($email_hash_address{$address})); + return 1 if (($name ne "") && exists($email_hash_name{lc($name)})); + return 1 if (($address ne "") && exists($email_hash_address{lc($address)})); return 0; } @@ -965,8 +979,8 @@ sub push_email_address { push(@email_to, [format_email($name, $address, $email_usename), $role]); } elsif (!email_inuse($name, $address)) { push(@email_to, [format_email($name, $address, $email_usename), $role]); - $email_hash_name{$name}++; - $email_hash_address{$address}++; + $email_hash_name{lc($name)}++; + $email_hash_address{lc($address)}++; } return 1; @@ -1259,7 +1273,7 @@ sub vcs_is_hg { return $vcs_used == 2; } -sub interactive_get_maintainer { +sub interactive_get_maintainers { my ($list_ref) = @_; my @list = @$list_ref; @@ -1269,11 +1283,12 @@ sub interactive_get_maintainer { my %authored; my %signed; my $count = 0; - + my $maintained = 0; #select maintainers by default - foreach my $entry (@list){ + foreach my $entry (@list) { my $role = $entry->[1]; - $selected{$count} = ($role =~ /^(maintainer|supporter|open list)/); + $selected{$count} = ($role =~ /^(maintainer|supporter|open list)/i); + $maintained = 1 if ($role =~ /^(maintainer|supporter)/i); $authored{$count} = 0; $signed{$count} = 0; $count++; @@ -1286,8 +1301,14 @@ sub interactive_get_maintainer { while (!$done) { $count = 0; if ($redraw) { - printf STDERR "\n%1s %2s %-65sauth sign\n", - "*", "#", "email/list and role:stats"; + printf STDERR "\n%1s %2s %-65s", + "*", "#", "email/list and role:stats"; + if ($email_git || + ($email_git_fallback && !$maintained) || + $email_git_blame) { + print STDERR "auth sign"; + } + print STDERR "\n"; foreach my $entry (@list) { my $email = $entry->[0]; my $role = $entry->[1]; @@ -1453,6 +1474,27 @@ sub interactive_get_maintainer { $pattern_depth = $val; $rerun = 1; } + } elsif ($sel eq "h" || $sel eq "?") { + print STDERR <[0]); + if ($email_remove_duplicates && + ((lc($name) eq lc($to_name)) || + (lc($address) eq lc($to_address)))) { + $author = $to->[0]; + $matched = 1; + last; + } + } + $author = format_email($name, $address, 1) if (!$matched); push(@authors, $author); } push(@commits, $1) if ($line =~ m/$VCS_cmds{"commit_pattern"}/); @@ -1539,6 +1592,20 @@ sub save_commits_by_signer { my $type = $types[0]; my $signer = $signers[0]; + my $matched = 0; + my ($name, $address) = parse_email($signer); + foreach my $to (@interactive_to) { + my ($to_name, $to_address) = parse_email($to->[0]); + if ($email_remove_duplicates && + ((lc($name) eq lc($to_name)) || + (lc($address) eq lc($to_address)))) { + $signer = $to->[0]; + $matched = 1; + last; + } + $signer = format_email($name, $address, 1) if (!$matched); + } + my $exists = 0; foreach my $ref(@{$commit_signer_hash{$signer}}) { if (@{$ref}[0] eq $commit && -- cgit v1.2.3-70-g09d2 From 7fa8ff2e0c0f326cdaaa4ae7d00f5d021e43ffa2 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Tue, 26 Oct 2010 14:22:56 -0700 Subject: scripts/get_maintainer.pl: fix mailmap handling Implement it, like it is described in git-shortlog. Signed-off-by: Florian Mickler Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 147 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 109 insertions(+), 38 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 61d3bb51bdd..faeace4e1fd 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -295,31 +295,76 @@ while (<$maint>) { } close($maint); -my %mailmap; -if ($email_remove_duplicates) { - open(my $mailmap, '<', "${lk_path}.mailmap") +# +# Read mail address map +# + +my $mailmap = read_mailmap(); + +sub read_mailmap { + my $mailmap = { + names => {}, + addresses => {} + }; + + if (!$email_remove_duplicates) { + return $mailmap; + } + + open(my $mailmap_file, '<', "${lk_path}.mailmap") or warn "$P: Can't open .mailmap: $!\n"; - while (<$mailmap>) { - my $line = $_; - next if ($line =~ m/^\s*#/); - next if ($line =~ m/^\s*$/); + while (<$mailmap_file>) { + s/#.*$//; #strip comments + s/^\s+|\s+$//g; #trim - my ($name, $address) = parse_email($line); - $line = format_email($name, $address, $email_usename); + next if (/^\s*$/); #skip empty lines + #entries have one of the following formats: + # name1 + # + # name1 + # name1 name2 + # (see man git-shortlog) + if (/^(.+)<(.+)>$/) { + my $real_name = $1; + my $address = $2; - next if ($line =~ m/^\s*$/); + $real_name =~ s/\s+$//; + $mailmap->{names}->{$address} = $real_name; - if (exists($mailmap{$name})) { - my $obj = $mailmap{$name}; - push(@$obj, $address); - } else { - my @arr = ($address); - $mailmap{$name} = \@arr; + } elsif (/^<([^\s]+)>\s*<([^\s]+)>$/) { + my $real_address = $1; + my $wrong_address = $2; + + $mailmap->{addresses}->{$wrong_address} = $real_address; + + } elsif (/^(.+)<([^\s]+)>\s*<([^\s]+)>$/) { + my $real_name= $1; + my $real_address = $2; + my $wrong_address = $3; + + $real_name =~ s/\s+$//; + + $mailmap->{names}->{$wrong_address} = $real_name; + $mailmap->{addresses}->{$wrong_address} = $real_address; + + } elsif (/^(.+)<([^\s]+)>\s*([^\s].*)<([^\s]+)>$/) { + my $real_name = $1; + my $real_address = $2; + my $wrong_name = $3; + my $wrong_address = $4; + + $real_name =~ s/\s+$//; + $wrong_name =~ s/\s+$//; + + $mailmap->{names}->{format_email($wrong_name,$wrong_address,1)} = $real_name; + $mailmap->{addresses}->{format_email($wrong_name,$wrong_address,1)} = $real_address; } } - close($mailmap); + close($mailmap_file); + + return $mailmap; } ## use the filenames on the command line or find the filenames in the patchfiles @@ -1061,30 +1106,58 @@ sub which_conf { return ""; } -sub mailmap { - my (@lines) = @_; - my %hash; +sub mailmap_email { + my $line = shift; - foreach my $line (@lines) { my ($name, $address) = parse_email($line); - if (!exists($hash{$name})) { - $hash{$name} = $address; - } elsif ($address ne $hash{$name}) { - $address = $hash{$name}; - $line = format_email($name, $address, $email_usename); - } - if (exists($mailmap{$name})) { - my $obj = $mailmap{$name}; - foreach my $map_address (@$obj) { - if (($map_address eq $address) && - ($map_address ne $hash{$name})) { - $line = format_email($name, $hash{$name}, $email_usename); + my $email = format_email($name, $address, 1); + my $real_name = $name; + my $real_address = $address; + + if (exists $mailmap->{names}->{$email} || exists $mailmap->{addresses}->{$email}) { + if (exists $mailmap->{names}->{$email}) { + $real_name = $mailmap->{names}->{$email}; + } + if (exists $mailmap->{addresses}->{$email}) { + $real_address = $mailmap->{addresses}->{$email}; + } + } else { + if (exists $mailmap->{names}->{$address}) { + $real_name = $mailmap->{names}->{$address}; + } + if (exists $mailmap->{addresses}->{$address}) { + $real_address = $mailmap->{addresses}->{$address}; } - } } + return format_email($real_name, $real_address, 1); +} + +sub mailmap { + my (@addresses) = @_; + + my @ret = (); + foreach my $line (@addresses) { + push(@ret, mailmap_email($line), 1); } - return @lines; + merge_by_realname(@ret) if $email_remove_duplicates; + + return @ret; +} + +sub merge_by_realname { + my %address_map; + my (@emails) = @_; + foreach my $email (@emails) { + my ($name, $address) = parse_email($email); + if (!exists $address_map{$name}) { + $address_map{$name} = $address; + } else { + $address = $address_map{$name}; + $email = format_email($name,$address,1); + } + } + } sub git_execute_cmd { @@ -1636,9 +1709,7 @@ sub vcs_assign { $divisor = 1; } - if ($email_remove_duplicates) { - @lines = mailmap(@lines); - } + @lines = mailmap(@lines); return if (@lines <= 0); -- cgit v1.2.3-70-g09d2 From 47abc7225761faf28be52b3ac4dc26ffeac7b750 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:57 -0700 Subject: scripts/get_maintainer.pl: correct indentation in a few places And a miscellaneous conversion of You to you in a help message Signed-off-by: Joe Perches Cc: Florian Mickler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 156 +++++++++++++++++++++++----------------------- 1 file changed, 78 insertions(+), 78 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index faeace4e1fd..0abfdbc5cdf 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -306,7 +306,7 @@ sub read_mailmap { my $mailmap = { names => {}, addresses => {} - }; + }; if (!$email_remove_duplicates) { return $mailmap; @@ -327,39 +327,39 @@ sub read_mailmap { # name1 name2 # (see man git-shortlog) if (/^(.+)<(.+)>$/) { - my $real_name = $1; - my $address = $2; + my $real_name = $1; + my $address = $2; - $real_name =~ s/\s+$//; - $mailmap->{names}->{$address} = $real_name; + $real_name =~ s/\s+$//; + $mailmap->{names}->{$address} = $real_name; } elsif (/^<([^\s]+)>\s*<([^\s]+)>$/) { - my $real_address = $1; - my $wrong_address = $2; + my $real_address = $1; + my $wrong_address = $2; - $mailmap->{addresses}->{$wrong_address} = $real_address; + $mailmap->{addresses}->{$wrong_address} = $real_address; } elsif (/^(.+)<([^\s]+)>\s*<([^\s]+)>$/) { - my $real_name= $1; - my $real_address = $2; - my $wrong_address = $3; + my $real_name= $1; + my $real_address = $2; + my $wrong_address = $3; - $real_name =~ s/\s+$//; + $real_name =~ s/\s+$//; - $mailmap->{names}->{$wrong_address} = $real_name; - $mailmap->{addresses}->{$wrong_address} = $real_address; + $mailmap->{names}->{$wrong_address} = $real_name; + $mailmap->{addresses}->{$wrong_address} = $real_address; } elsif (/^(.+)<([^\s]+)>\s*([^\s].*)<([^\s]+)>$/) { - my $real_name = $1; - my $real_address = $2; - my $wrong_name = $3; - my $wrong_address = $4; + my $real_name = $1; + my $real_address = $2; + my $wrong_name = $3; + my $wrong_address = $4; - $real_name =~ s/\s+$//; - $wrong_name =~ s/\s+$//; + $real_name =~ s/\s+$//; + $wrong_name =~ s/\s+$//; - $mailmap->{names}->{format_email($wrong_name,$wrong_address,1)} = $real_name; - $mailmap->{addresses}->{format_email($wrong_name,$wrong_address,1)} = $real_address; + $mailmap->{names}->{format_email($wrong_name,$wrong_address,1)} = $real_name; + $mailmap->{addresses}->{format_email($wrong_name,$wrong_address,1)} = $real_address; } } close($mailmap_file); @@ -743,30 +743,30 @@ EOT } sub top_of_kernel_tree { - my ($lk_path) = @_; + my ($lk_path) = @_; - if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") { - $lk_path .= "/"; - } - if ( (-f "${lk_path}COPYING") - && (-f "${lk_path}CREDITS") - && (-f "${lk_path}Kbuild") - && (-f "${lk_path}MAINTAINERS") - && (-f "${lk_path}Makefile") - && (-f "${lk_path}README") - && (-d "${lk_path}Documentation") - && (-d "${lk_path}arch") - && (-d "${lk_path}include") - && (-d "${lk_path}drivers") - && (-d "${lk_path}fs") - && (-d "${lk_path}init") - && (-d "${lk_path}ipc") - && (-d "${lk_path}kernel") - && (-d "${lk_path}lib") - && (-d "${lk_path}scripts")) { - return 1; - } - return 0; + if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") { + $lk_path .= "/"; + } + if ( (-f "${lk_path}COPYING") + && (-f "${lk_path}CREDITS") + && (-f "${lk_path}Kbuild") + && (-f "${lk_path}MAINTAINERS") + && (-f "${lk_path}Makefile") + && (-f "${lk_path}README") + && (-d "${lk_path}Documentation") + && (-d "${lk_path}arch") + && (-d "${lk_path}include") + && (-d "${lk_path}drivers") + && (-d "${lk_path}fs") + && (-d "${lk_path}init") + && (-d "${lk_path}ipc") + && (-d "${lk_path}kernel") + && (-d "${lk_path}lib") + && (-d "${lk_path}scripts")) { + return 1; + } + return 0; } sub parse_email { @@ -1107,29 +1107,30 @@ sub which_conf { } sub mailmap_email { - my $line = shift; + my $line = shift; - my ($name, $address) = parse_email($line); - my $email = format_email($name, $address, 1); - my $real_name = $name; - my $real_address = $address; - - if (exists $mailmap->{names}->{$email} || exists $mailmap->{addresses}->{$email}) { - if (exists $mailmap->{names}->{$email}) { - $real_name = $mailmap->{names}->{$email}; - } - if (exists $mailmap->{addresses}->{$email}) { - $real_address = $mailmap->{addresses}->{$email}; - } - } else { - if (exists $mailmap->{names}->{$address}) { - $real_name = $mailmap->{names}->{$address}; - } - if (exists $mailmap->{addresses}->{$address}) { - $real_address = $mailmap->{addresses}->{$address}; - } + my ($name, $address) = parse_email($line); + my $email = format_email($name, $address, 1); + my $real_name = $name; + my $real_address = $address; + + if (exists $mailmap->{names}->{$email} || + exists $mailmap->{addresses}->{$email}) { + if (exists $mailmap->{names}->{$email}) { + $real_name = $mailmap->{names}->{$email}; + } + if (exists $mailmap->{addresses}->{$email}) { + $real_address = $mailmap->{addresses}->{$email}; + } + } else { + if (exists $mailmap->{names}->{$address}) { + $real_name = $mailmap->{names}->{$address}; + } + if (exists $mailmap->{addresses}->{$address}) { + $real_address = $mailmap->{addresses}->{$address}; } - return format_email($real_name, $real_address, 1); + } + return format_email($real_name, $real_address, 1); } sub mailmap { @@ -1146,18 +1147,17 @@ sub mailmap { } sub merge_by_realname { - my %address_map; - my (@emails) = @_; - foreach my $email (@emails) { - my ($name, $address) = parse_email($email); - if (!exists $address_map{$name}) { - $address_map{$name} = $address; - } else { - $address = $address_map{$name}; - $email = format_email($name,$address,1); - } + my %address_map; + my (@emails) = @_; + foreach my $email (@emails) { + my ($name, $address) = parse_email($email); + if (!exists $address_map{$name}) { + $address_map{$name} = $address; + } else { + $address = $address_map{$name}; + $email = format_email($name,$address,1); } - + } } sub git_execute_cmd { @@ -1555,7 +1555,7 @@ commit signers and mailing lists that could be CC'd on a patch. Any *'d entry is selected. -If you have git or hg installed, You can choose to summarize the commit +If you have git or hg installed, you can choose to summarize the commit history of files in the patch. Also, each line of the current file can be matched to its commit author and that commits signers with blame. -- cgit v1.2.3-70-g09d2 From b9e2331dd1e0e04f7f2a6f8aa0c05bac2a7f0d7b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:58 -0700 Subject: scripts/get_maintainer.pl: use mailmap in name deduplication and other updates Use Florian Mickler's mailmap routine to reduce name duplication. o Add subroutine deduplicate_email to centralize code o Add hashes for deduplicate_(name|address)_hash o Remove now unused @interactive_to o Whitespace neatening o Add command line --help text o Add --mailmap command line option control o Interactive changes: - Add toggles for maintainer, git and list selections - Default selection is all - Add mailmap control Update to 0.26-beta5 Signed-off-by: Joe Perches Cc: Florian Mickler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 232 +++++++++++++++++++++++++++++----------------- 1 file changed, 148 insertions(+), 84 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 0abfdbc5cdf..e822518bc61 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.26-beta4'; +my $V = '0.26-beta5'; use Getopt::Long qw(:config no_auto_abbrev); @@ -36,6 +36,7 @@ my $email_git_since = "1-year-ago"; my $email_hg_since = "-365"; my $interactive = 0; my $email_remove_duplicates = 1; +my $email_use_mailmap = 1; my $output_multiline = 1; my $output_separator = ", "; my $output_roles = 0; @@ -192,6 +193,7 @@ if (!GetOptions( 'hg-since=s' => \$email_hg_since, 'i|interactive!' => \$interactive, 'remove-duplicates!' => \$email_remove_duplicates, + 'mailmap!' => \$email_use_mailmap, 'm!' => \$email_maintainer, 'n!' => \$email_usename, 'l!' => \$email_list, @@ -300,17 +302,17 @@ close($maint); # Read mail address map # -my $mailmap = read_mailmap(); +my $mailmap; + +read_mailmap(); sub read_mailmap { - my $mailmap = { + $mailmap = { names => {}, addresses => {} }; - if (!$email_remove_duplicates) { - return $mailmap; - } + return if (!$email_use_mailmap || !(-f "${lk_path}.mailmap")); open(my $mailmap_file, '<', "${lk_path}.mailmap") or warn "$P: Can't open .mailmap: $!\n"; @@ -331,6 +333,7 @@ sub read_mailmap { my $address = $2; $real_name =~ s/\s+$//; + ($real_name, $address) = parse_email("$real_name <$address>"); $mailmap->{names}->{$address} = $real_name; } elsif (/^<([^\s]+)>\s*<([^\s]+)>$/) { @@ -340,12 +343,13 @@ sub read_mailmap { $mailmap->{addresses}->{$wrong_address} = $real_address; } elsif (/^(.+)<([^\s]+)>\s*<([^\s]+)>$/) { - my $real_name= $1; + my $real_name = $1; my $real_address = $2; my $wrong_address = $3; $real_name =~ s/\s+$//; - + ($real_name, $real_address) = + parse_email("$real_name <$real_address>"); $mailmap->{names}->{$wrong_address} = $real_name; $mailmap->{addresses}->{$wrong_address} = $real_address; @@ -356,15 +360,19 @@ sub read_mailmap { my $wrong_address = $4; $real_name =~ s/\s+$//; + ($real_name, $real_address) = + parse_email("$real_name <$real_address>"); + $wrong_name =~ s/\s+$//; + ($wrong_name, $wrong_address) = + parse_email("$wrong_name <$wrong_address>"); - $mailmap->{names}->{format_email($wrong_name,$wrong_address,1)} = $real_name; - $mailmap->{addresses}->{format_email($wrong_name,$wrong_address,1)} = $real_address; + my $wrong_email = format_email($wrong_name, $wrong_address, 1); + $mailmap->{names}->{$wrong_email} = $real_name; + $mailmap->{addresses}->{$wrong_email} = $real_address; } } close($mailmap_file); - - return $mailmap; } ## use the filenames on the command line or find the filenames in the patchfiles @@ -453,7 +461,8 @@ my @scm = (); my @web = (); my @subsystem = (); my @status = (); -my @interactive_to = (); +my %deduplicate_name_hash = (); +my %deduplicate_address_hash = (); my $signature_pattern; my @maintainers = get_maintainers(); @@ -497,7 +506,8 @@ sub get_maintainers { @web = (); @subsystem = (); @status = (); - @interactive_to = (); + %deduplicate_name_hash = (); + %deduplicate_address_hash = (); if ($email_git_all_signature_types) { $signature_pattern = "(.+?)[Bb][Yy]:"; } else { @@ -506,7 +516,7 @@ sub get_maintainers { # Find responsible parties - my %exact_pattern_match_hash; + my %exact_pattern_match_hash = (); foreach my $file (@files) { @@ -590,7 +600,9 @@ sub get_maintainers { } } - @interactive_to = (@email_to, @list_to); + foreach my $email (@email_to, @list_to) { + $email->[0] = deduplicate_email($email->[0]); + } foreach my $file (@files) { if ($email && @@ -637,8 +649,7 @@ sub get_maintainers { } if ($interactive) { - @interactive_to = @to; - @to = interactive_get_maintainers(\@interactive_to); + @to = interactive_get_maintainers(\@to); } return @to; @@ -702,8 +713,9 @@ Output type options: Other options: --pattern-depth => Number of pattern directory traversals (default: 0 (all)) - --keywords => scan patch for keywords (default: 1 (on)) - --sections => print the entire subsystem sections with pattern matches + --keywords => scan patch for keywords (default: $keywords) + --sections => print all of the subsystem sections with pattern matches + --mailmap => use .mailmap file (default: $email_use_mailmap) --version => show version --help => show this help information @@ -1107,7 +1119,7 @@ sub which_conf { } sub mailmap_email { - my $line = shift; + my ($line) = @_; my ($name, $address) = parse_email($line); my $email = format_email($name, $address, 1); @@ -1136,26 +1148,25 @@ sub mailmap_email { sub mailmap { my (@addresses) = @_; - my @ret = (); + my @mapped_emails = (); foreach my $line (@addresses) { - push(@ret, mailmap_email($line), 1); + push(@mapped_emails, mailmap_email($line)); } - - merge_by_realname(@ret) if $email_remove_duplicates; - - return @ret; + merge_by_realname(@mapped_emails) if ($email_use_mailmap); + return @mapped_emails; } sub merge_by_realname { my %address_map; my (@emails) = @_; + foreach my $email (@emails) { my ($name, $address) = parse_email($email); - if (!exists $address_map{$name}) { - $address_map{$name} = $address; - } else { + if (exists $address_map{$name}) { $address = $address_map{$name}; - $email = format_email($name,$address,1); + $email = format_email($name, $address, 1); + } else { + $address_map{$name} = $address; } } } @@ -1194,8 +1205,7 @@ sub extract_formatted_signatures { ## Reformat email addresses (with names) to avoid badly written signatures foreach my $signer (@signature_lines) { - my ($name, $address) = parse_email($signer); - $signer = format_email($name, $address, 1); + $signer = deduplicate_email($signer); } return (\@type, \@signature_lines); @@ -1339,6 +1349,7 @@ sub vcs_exists { } sub vcs_is_git { + vcs_exists(); return $vcs_used == 1; } @@ -1357,11 +1368,9 @@ sub interactive_get_maintainers { my %signed; my $count = 0; my $maintained = 0; - #select maintainers by default foreach my $entry (@list) { - my $role = $entry->[1]; - $selected{$count} = ($role =~ /^(maintainer|supporter|open list)/i); - $maintained = 1 if ($role =~ /^(maintainer|supporter)/i); + $maintained = 1 if ($entry->[1] =~ /^(maintainer|supporter)/i); + $selected{$count} = 1; $authored{$count} = 0; $signed{$count} = 0; $count++; @@ -1418,24 +1427,34 @@ sub interactive_get_maintainers { if ($print_options) { $print_options = 0; if (vcs_exists()) { - print STDERR -"\nVersion Control options:\n" . -"g use git history [$email_git]\n" . -"gf use git-fallback [$email_git_fallback]\n" . -"b use git blame [$email_git_blame]\n" . -"bs use blame signatures [$email_git_blame_signatures]\n" . -"c# minimum commits [$email_git_min_signatures]\n" . -"%# min percent [$email_git_min_percent]\n" . -"d# history to use [$$date_ref]\n" . -"x# max maintainers [$email_git_max_maintainers]\n" . -"t all signature types [$email_git_all_signature_types]\n"; + print STDERR <[1] =~ /^(maintainer|supporter)/i); + } + } elsif (lc($str) eq "g") { + for (my $i = 0; $i < $count; $i++) { + $selected{$i} = !$selected{$i} + if ($list[$i]->[1] =~ /^(author|commit|signer)/i); + } + } elsif (lc($str) eq "l") { + for (my $i = 0; $i < $count; $i++) { + $selected{$i} = !$selected{$i} + if ($list[$i]->[1] =~ /^(open list)/i); + } + } elsif (lc($str) eq "s") { + for (my $i = 0; $i < $count; $i++) { + $selected{$i} = !$selected{$i} + if ($list[$i]->[1] =~ /^(subscriber list)/i); + } + } } elsif ($sel eq "a") { if ($val > 0 && $val <= $count) { $authored{$val - 1} = !$authored{$val - 1}; @@ -1539,6 +1580,10 @@ sub interactive_get_maintainers { } elsif ($sel eq "r") { bool_invert(\$email_remove_duplicates); $rerun = 1; + } elsif ($sel eq "m") { + bool_invert(\$email_use_mailmap); + read_mailmap(); + $rerun = 1; } elsif ($sel eq "k") { bool_invert(\$keywords); $rerun = 1; @@ -1602,6 +1647,36 @@ sub bool_invert { } } +sub deduplicate_email { + my ($email) = @_; + + my $matched = 0; + my ($name, $address) = parse_email($email); + $email = format_email($name, $address, 1); + $email = mailmap_email($email); + + return $email if (!$email_remove_duplicates); + + ($name, $address) = parse_email($email); + + if ($deduplicate_name_hash{lc($name)}) { + $name = $deduplicate_name_hash{lc($name)}->[0]; + $address = $deduplicate_name_hash{lc($name)}->[1]; + $matched = 1; + } elsif ($deduplicate_address_hash{lc($address)}) { + $name = $deduplicate_address_hash{lc($address)}->[0]; + $address = $deduplicate_address_hash{lc($address)}->[1]; + $matched = 1; + } + if (!$matched) { + $deduplicate_name_hash{lc($name)} = [ $name, $address ]; + $deduplicate_address_hash{lc($address)} = [ $name, $address ]; + } + $email = format_email($name, $address, 1); + $email = mailmap_email($email); + return $email; +} + sub save_commits_by_author { my (@lines) = @_; @@ -1611,20 +1686,8 @@ sub save_commits_by_author { foreach my $line (@lines) { if ($line =~ m/$VCS_cmds{"author_pattern"}/) { - my $matched = 0; my $author = $1; - my ($name, $address) = parse_email($author); - foreach my $to (@interactive_to) { - my ($to_name, $to_address) = parse_email($to->[0]); - if ($email_remove_duplicates && - ((lc($name) eq lc($to_name)) || - (lc($address) eq lc($to_address)))) { - $author = $to->[0]; - $matched = 1; - last; - } - } - $author = format_email($name, $address, 1) if (!$matched); + $author = deduplicate_email($author); push(@authors, $author); } push(@commits, $1) if ($line =~ m/$VCS_cmds{"commit_pattern"}/); @@ -1665,19 +1728,7 @@ sub save_commits_by_signer { my $type = $types[0]; my $signer = $signers[0]; - my $matched = 0; - my ($name, $address) = parse_email($signer); - foreach my $to (@interactive_to) { - my ($to_name, $to_address) = parse_email($to->[0]); - if ($email_remove_duplicates && - ((lc($name) eq lc($to_name)) || - (lc($address) eq lc($to_address)))) { - $signer = $to->[0]; - $matched = 1; - last; - } - $signer = format_email($name, $address, 1) if (!$matched); - } + $signer = deduplicate_email($signer); my $exists = 0; foreach my $ref(@{$commit_signer_hash{$signer}}) { @@ -1751,6 +1802,11 @@ sub vcs_file_signoffs { $cmd =~ s/(\$\w+)/$1/eeg; # interpolate $cmd ($commits, @signers) = vcs_find_signers($cmd); + + foreach my $signer (@signers) { + $signer = deduplicate_email($signer); + } + vcs_assign("commit_signer", $commits, @signers); } @@ -1828,9 +1884,8 @@ sub vcs_file_blame { foreach my $line (@lines) { if ($line =~ m/$VCS_cmds{"author_pattern"}/) { my $author = $1; - my ($name, $address) = parse_email($author); - $author = format_email($name, $address, 1); - push(@authors, $1); + $author = deduplicate_email($author); + push(@authors, $author); } } @@ -1846,9 +1901,12 @@ sub vcs_file_blame { $cmd =~ s/(\$\w+)/$1/eeg; #interpolate $cmd my @author = vcs_find_author($cmd); next if !@author; + + my $formatted_author = deduplicate_email($author[0]); + my $count = grep(/$commit/, @all_commits); for ($i = 0; $i < $count ; $i++) { - push(@blame_signers, $author[0]); + push(@blame_signers, $formatted_author); } } } @@ -1856,8 +1914,14 @@ sub vcs_file_blame { vcs_assign("authored lines", $total_lines, @blame_signers); } } + foreach my $signer (@signers) { + $signer = deduplicate_email($signer); + } vcs_assign("commits", $total_commits, @signers); } else { + foreach my $signer (@signers) { + $signer = deduplicate_email($signer); + } vcs_assign("modified commits", $total_commits, @signers); } } -- cgit v1.2.3-70-g09d2 From fae99206769b6bbf8a20ab883726b164945771d7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:22:58 -0700 Subject: scripts/get_maintainer.pl: don't deduplicate unnamed addresses ie: mailing lists Fix a defect with the first mailing list address being used for each subsequent mailing list. Updated to 0.26-beta6. Signed-off-by: Joe Perches Cc: Florian Mickler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index e822518bc61..d21ec3a8960 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.26-beta5'; +my $V = '0.26-beta6'; use Getopt::Long qw(:config no_auto_abbrev); @@ -1036,7 +1036,7 @@ sub push_email_address { push(@email_to, [format_email($name, $address, $email_usename), $role]); } elsif (!email_inuse($name, $address)) { push(@email_to, [format_email($name, $address, $email_usename), $role]); - $email_hash_name{lc($name)}++; + $email_hash_name{lc($name)}++ if ($name ne ""); $email_hash_address{lc($address)}++; } @@ -1659,7 +1659,7 @@ sub deduplicate_email { ($name, $address) = parse_email($email); - if ($deduplicate_name_hash{lc($name)}) { + if ($name ne "" && $deduplicate_name_hash{lc($name)}) { $name = $deduplicate_name_hash{lc($name)}->[0]; $address = $deduplicate_name_hash{lc($name)}->[1]; $matched = 1; -- cgit v1.2.3-70-g09d2 From 6b4c5bebcebb0a48d29947e9aa749650751a7696 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:11 -0700 Subject: checkpatch: fix regressions in "fix handling of leading spaces" The patch "checkpatch: fix handling of leading spaces" added checks for leading spaces on lines, but this introduces regressions. Firstly it does not correctly detect when we are in a comment. Secondly it does not allow for preprocessor command spacing. Finally it does not allow for label indentation which is required to be less than one tab. Fix these up: Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 2039acdf512..0a87c7417ad 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1459,10 +1459,13 @@ sub process { } # check for spaces at the beginning of a line. - if ($rawline =~ /^\+ / && $rawline !~ /\+ +\*/) { +# Exceptions: +# 1) within comments +# 2) indented preprocessor commands +# 3) hanging labels + if ($rawline =~ /^\+ / && $line !~ /\+ *(?:$;|#|$Ident:)/) { my $herevet = "$here\n" . cat_vet($rawline) . "\n"; - WARN("please, no space for starting a line, \ - excluding comments\n" . $herevet); + WARN("please, no spaces at the start of a line\n" . $herevet); } # check we are in a valid C source file if not then ignore this hunk -- cgit v1.2.3-70-g09d2 From e91b6e263ed6735c766cb14bbe63b9c7bd774526 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:11 -0700 Subject: checkpatch: types may sit on a line on their own When the following form is used we have a type which fully fills a line. This means that a type may end at the end of line as well as at the following identifier. int ** foo; Reported-by: Daniel Walker Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 0a87c7417ad..41f59b1e209 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -843,7 +843,7 @@ sub annotate_values { $av_preprocessor = 0; } - } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\()/) { + } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) { print "DECLARE($1)\n" if ($dbg_values > 1); $type = 'T'; -- cgit v1.2.3-70-g09d2 From d2c0a23514d8ac4ed10a8e742467cfb72ca3bed8 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:12 -0700 Subject: checkpatch: suggest cleanpatch and cleanfile when appropriate When we hit types of whitespace which may be fixed by scripts/cleanpatch and scripts/cleanfile suggest their use in our report. Suggested-by: Bartlomiej Zolnierkiewicz Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 41f59b1e209..32d6a236570 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -103,6 +103,8 @@ for my $key (keys %debug) { die "$@" if ($@); } +my $rpt_cleaners = 0; + if ($terse) { $emacs = 1; $quiet++; @@ -1389,6 +1391,7 @@ sub process { } elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) { my $herevet = "$here\n" . cat_vet($rawline) . "\n"; ERROR("trailing whitespace\n" . $herevet); + $rpt_cleaners = 1; } # check for Kconfig help text having a real description @@ -1450,6 +1453,7 @@ sub process { $rawline =~ /^\+\s* \s*/) { my $herevet = "$here\n" . cat_vet($rawline) . "\n"; ERROR("code indent should use tabs where possible\n" . $herevet); + $rpt_cleaners = 1; } # check for space before tabs. @@ -2842,6 +2846,15 @@ sub process { print "\n" if ($quiet == 0); } + if ($quiet == 0) { + # If there were whitespace errors which cleanpatch can fix + # then suggest that. + if ($rpt_cleaners) { + print "NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or\n"; + print " scripts/cleanfile\n\n"; + } + } + if ($clean == 1 && $quiet == 0) { print "$vname has no obvious style problems and is ready for submission.\n" } -- cgit v1.2.3-70-g09d2 From fb2d2c1b5825503d30fb6f2dc328dbe4a47d9794 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:12 -0700 Subject: checkpatch: ensure we do not collapse bracketed sections into constants When determining if a return () sequence is a function style bracketing we simplify the expression one bracket at a time replacing each with a constant. However this can trigger a false merge with expressions as below: return (foo)0; Prevent this false merging. Reported-by: Hitoshi Mitake Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 32d6a236570..8d010ac0efe 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2183,15 +2183,16 @@ sub process { my $value = $2; # Flatten any parentheses - $value =~ s/\)\(/\) \(/g; + $value =~ s/\(/ \(/g; + $value =~ s/\)/\) /g; while ($value =~ s/\[[^\{\}]*\]/1/ || $value !~ /(?:$Ident|-?$Constant)\s* $Compare\s* (?:$Ident|-?$Constant)/x && $value =~ s/\([^\(\)]*\)/1/) { } - - if ($value =~ /^(?:$Ident|-?$Constant)$/) { +#print "value<$value>\n"; + if ($value =~ /^\s*(?:$Ident|-?$Constant)\s*$/) { ERROR("return is not a function, parentheses are not required\n" . $herecurr); } elsif ($spacing !~ /\s+/) { -- cgit v1.2.3-70-g09d2 From 9446ef569c288e683225fec8337a0b2b81e75cc5 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:13 -0700 Subject: checkpatch: handle casts better fixing false categorisation of : as binary The following incantation is triggering categorisation of its colon (:) as a binary form, which it is not: return foo ? (s8)bar : baz; Handle casts differently from types in the categoriser, allowing us to better track (s8)bar as a value and not a declaration. Reported-by: Jean Delvare Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 8d010ac0efe..3cec2990d51 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -845,6 +845,11 @@ sub annotate_values { $av_preprocessor = 0; } + } elsif ($cur =~ /^(\(\s*$Type\s*)\)/) { + print "CAST($1)\n" if ($dbg_values > 1); + push(@av_paren_type, $type); + $type = 'C'; + } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) { print "DECLARE($1)\n" if ($dbg_values > 1); $type = 'T'; -- cgit v1.2.3-70-g09d2 From 53a3c4487a05b8f26ef72fe434a750a3402c998f Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:14 -0700 Subject: checkpatch: returning errno typically should be negative Add a (strict mode only) test to check for non-negative returns of what appear to be errno values as the majority case these should indeed be negative. Suggested-by: Andrew Morton Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 3cec2990d51..bcdb54bd61a 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2204,6 +2204,13 @@ sub process { ERROR("space required before the open parenthesis '('\n" . $herecurr); } } +# Return of what appears to be an errno should normally be -'ve + if ($line =~ /^.\s*return\s*(E[A-Z]*)\s*;/) { + my $name = $1; + if ($name ne 'EOF' && $name ne 'ERROR') { + WARN("return of an errno should typically be -ve (return -$1)\n" . $herecurr); + } + } # Need a space before open parenthesis after if, while etc if ($line=~/\b(if|while|for|switch)\(/) { -- cgit v1.2.3-70-g09d2 From 8cf6de7145943caa38c56c61cd83b17687afd900 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:14 -0700 Subject: checkpatch: add check for space after struct, union, and enum Add spacing checks for struct, union, and enum definitions. Check the spacing after type and before the equals (=) and open brace ({). Based on a patch by Joe Perches. Cc: Joe Perches Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index bcdb54bd61a..983ac1816da 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1905,6 +1905,16 @@ sub process { ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr); } +# missing space after union or struct definition + if ($rawline =~ /^\+\s*(union|struct)\s+$Ident[=\{]/) { + WARN("Missing space after struct or union definition\n" . $herecurr); + } + +# missing space after enum definition + if ($rawline =~ /^\+\s*enum\{/) { + WARN("Missing space after enum definition\n" . $herecurr); + } + # open braces for enum, union and struct go on the same line. if ($line =~ /^.\s*{/ && $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) { -- cgit v1.2.3-70-g09d2 From 0c73b4eb7a825a5aff16d8a9701f6c28056de058 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:15 -0700 Subject: checkpatch: simplify and consolidate "missing space after" checks Commonise the code for missing spaces after struct, union, and enum such that they share the same code. Ensure we cover all the common cases in each case. Check against the sanitised line to ensure we do not report on comments and strings. Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 983ac1816da..cb19f54b4b2 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1905,22 +1905,17 @@ sub process { ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr); } -# missing space after union or struct definition - if ($rawline =~ /^\+\s*(union|struct)\s+$Ident[=\{]/) { - WARN("Missing space after struct or union definition\n" . $herecurr); - } - -# missing space after enum definition - if ($rawline =~ /^\+\s*enum\{/) { - WARN("Missing space after enum definition\n" . $herecurr); - } - # open braces for enum, union and struct go on the same line. if ($line =~ /^.\s*{/ && $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) { ERROR("open brace '{' following $1 go on the same line\n" . $hereprev); } +# missing space after union, struct or enum definition + if ($line =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?(?:\s+$Ident)?[=\{]/) { + WARN("missing space after $1 definition\n" . $herecurr); + } + # check for spacing round square brackets; allowed: # 1. with a type on the left -- int [] a; # 2. at the beginning of a line for slice initialisers -- [0...10] = 5, -- cgit v1.2.3-70-g09d2 From 9fe287d79b0af983050d24e7916cf3d1f019f553 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:15 -0700 Subject: checkpatch: ensure kconfig help checks only apply when we are adding help When checking the length of the help we need to be sure we are seeing the whole story before erroring. Firstly we only want to check when adding the help in the first place. Second we need to be sure that we are seeing the end of the entry, nominally when there is no context below or that context shows the start of the next entry. Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index cb19f54b4b2..e44ff91e811 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1400,18 +1400,34 @@ sub process { } # check for Kconfig help text having a real description +# Only applies when adding the entry originally, after that we do not have +# sufficient context to determine whether it is indeed long enough. if ($realfile =~ /Kconfig/ && - $line =~ /\+?\s*(---)?help(---)?$/) { + $line =~ /\+\s*(?:---)?help(?:---)?$/) { my $length = 0; - for (my $l = $linenr; defined($lines[$l]); $l++) { - my $f = $lines[$l]; + my $cnt = $realcnt; + my $ln = $linenr + 1; + my $f; + my $is_end = 0; + while ($cnt > 0 && defined $lines[$ln - 1]) { + $f = $lines[$ln - 1]; + $cnt-- if ($lines[$ln - 1] !~ /^-/); + $is_end = $lines[$ln - 1] =~ /^\+/; + $ln++; + + next if ($f =~ /^-/); + $f =~ s/^.//; $f =~ s/#.*//; $f =~ s/^\s+//; next if ($f =~ /^$/); - last if ($f =~ /^\s*config\s/); + if ($f =~ /^\s*config\s/) { + $is_end = 1; + last; + } $length++; } - WARN("please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($length < 4); + WARN("please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_end && $length < 4); + #print "is_end<$is_end> length<$length>\n"; } # check we are in a valid source file if not then ignore this hunk -- cgit v1.2.3-70-g09d2 From 3bf9a009fccea422bc355414a3bdf5f35fff9f36 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 26 Oct 2010 14:23:16 -0700 Subject: checkpatch: check for incorrect permissions Throw an error when a source file has been given execute permissions using the mode change line present in git diffs. Also alow the filename matching to use the "diff" line in addition to the "+++" line, since the mode change lines appear before any "+++" lines. [apw@canonical.com: simplified filename logic slightly, added tests] Cc: Andy Whitcroft Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index e44ff91e811..93fa145671a 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1315,7 +1315,11 @@ sub process { $here = "#$realline: " if ($file); # extract the filename as it passes - if ($line=~/^\+\+\+\s+(\S+)/) { + if ($line =~ /^diff --git.*?(\S+)$/) { + $realfile = $1; + $realfile =~ s@^([^/]*)/@@; + + } elsif ($line =~ /^\+\+\+\s+(\S+)/) { $realfile = $1; $realfile =~ s@^([^/]*)/@@; @@ -1339,6 +1343,14 @@ sub process { $cnt_lines++ if ($realcnt != 0); +# Check for incorrect file permissions + if ($line =~ /^new (file )?mode.*[7531]\d{0,2}$/) { + my $permhere = $here . "FILE: $realfile\n"; + if ($realfile =~ /(Makefile|Kconfig|\.c|\.h|\.S|\.tmpl)$/) { + ERROR("do not set execute permissions for source files\n" . $permhere); + } + } + #check the patch for a signoff: if ($line =~ /^\s*signed-off-by:/i) { # This is a signoff, if ugly, so do not double report. -- cgit v1.2.3-70-g09d2 From 03f1df7da5696ddfa6e167b37e0c0ce5aad3de79 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:23:16 -0700 Subject: checkpatch: Add additional attribute #defines On Wed, 2010-08-11 at 12:35 -0400, Dave Jones wrote: > I just got this from a patch I merged.. > > ERROR: need consistent spacing around '*' (ctx:WxV) > #121: FILE: arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c:113: > +static struct pcc_cpu __percpu *pcc_cpu_info; > ^ > which doesn't seem right. Perhaps these need to be added to checkpatch. [apw@canonical.com: added tests] Signed-off-by: Joe Perches Signed-off-by: Andy Whitcroft Cc: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 93fa145671a..c151c9e142a 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -152,6 +152,20 @@ our $Sparse = qr{ # We need \b after 'init' otherwise 'initconst' will cause a false positive in a check our $Attribute = qr{ const| + __percpu| + __nocast| + __safe| + __bitwise__| + __packed__| + __packed2__| + __naked| + __maybe_unused| + __always_unused| + __noreturn| + __used| + __cold| + __noclone| + __deprecated| __read_mostly| __kprobes| __(?:mem|cpu|dev|)(?:initdata|initconst|init\b)| -- cgit v1.2.3-70-g09d2 From 015830be9779aeae7de7060b07a3157a8e41bcb4 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:17 -0700 Subject: checkpatch: update copyright dates Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index c151c9e142a..53b2eaecba0 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2,7 +2,7 @@ # (c) 2001, Dave Jones. (the file handling bit) # (c) 2005, Joel Schopp (the ugly bit) # (c) 2007,2008, Andy Whitcroft (new conditions, test suite) -# (c) 2008,2009, Andy Whitcroft +# (c) 2008-2010 Andy Whitcroft # Licensed under the terms of the GNU GPL License version 2 use strict; -- cgit v1.2.3-70-g09d2 From 5eaa20b984eb316533b4a098d8de3912e434df6a Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:18 -0700 Subject: checkpatch: clean up structure definition macro handline Handle definitions such as the following correctly, it is not a complex statement: #define PREALLOC(NAME, START, END, FLAGS) { \ .name = (NAME), \ .start = (START), \ .end = (END), \ .flags = (FLAGS) \ }, Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 53b2eaecba0..d5361e49aba 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2476,8 +2476,8 @@ sub process { \.$Ident\s*=\s*| ^\"|\"$ }x; - #print "REST<$rest> dstat<$dstat>\n"; - if ($rest ne '') { + #print "REST<$rest> dstat<$dstat> ctx<$ctx>\n"; + if ($rest ne '' && $rest ne ',') { if ($rest !~ /while\s*\(/ && $dstat !~ /$exceptions/) { -- cgit v1.2.3-70-g09d2 From 3cbf62df3a8ce61cb1aa20b7dae964058988bfdd Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:18 -0700 Subject: checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar Handly definitions similar to below. The definition macro spits out a symbol with a prefix. Add matching of any identifier prefix: DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, ata_scsi_lpm_show, ata_scsi_lpm_put); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index d5361e49aba..8ab45b72b39 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1822,8 +1822,17 @@ sub process { !defined $suppress_export{$realline_next} && ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { + # Handle definitions which produce identifiers with + # a prefix: + # XXX(foo); + # EXPORT_SYMBOL(something_foo); my $name = $1; - if ($stat !~ /(?: + if ($stat =~ /^.([A-Z_]+)\s*\(\s*($Ident)/ && + $name =~ /^${Ident}_$2/) { +#print "FOO C name<$name>\n"; + $suppress_export{$realline_next} = 1; + + } elsif ($stat !~ /(?: \n.}\s*$| ^.DEFINE_$Ident\(\Q$name\E\)| ^.DECLARE_$Ident\(\Q$name\E\)| -- cgit v1.2.3-70-g09d2 From 01464f30a97c5c30bf9633309b27cce055cef8fd Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:19 -0700 Subject: checkpatch: statement/block context analyser should look at sanitised lines When tracking context to find a block or statement we need to use the sanitised lines, else perentheses '(' & ')' and braces '{' & '}' can throw the scanner out. Also fix up a couple of error outputs which include those sanitised lines incorrectly. Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 8ab45b72b39..d086ffe377d 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -691,15 +691,15 @@ sub ctx_block_get { $blk .= $rawlines[$line]; # Handle nested #if/#else. - if ($rawlines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) { + if ($lines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) { push(@stack, $level); - } elsif ($rawlines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) { + } elsif ($lines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) { $level = $stack[$#stack - 1]; - } elsif ($rawlines[$line] =~ /^.\s*#\s*endif\b/) { + } elsif ($lines[$line] =~ /^.\s*#\s*endif\b/) { $level = pop(@stack); } - foreach my $c (split(//, $rawlines[$line])) { + foreach my $c (split(//, $lines[$line])) { ##print "C<$c>L<$level><$open$close>O<$off>\n"; if ($off > 0) { $off--; @@ -1652,7 +1652,7 @@ sub process { if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { ERROR("that open brace { should be on the previous line\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); + "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); } if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ && $ctx =~ /\)\s*\;\s*$/ && @@ -1661,7 +1661,7 @@ sub process { my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]); if ($nindent > $indent) { WARN("trailing semicolon indicates no statements, indent implies otherwise\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); + "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n"); } } } -- cgit v1.2.3-70-g09d2 From 267ad8f42644c2fa4ff6c2e7596d2b02c7397c85 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 26 Oct 2010 14:23:19 -0700 Subject: checkpatch: version 0.31 Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index d086ffe377d..c1e7fb3eab4 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -10,7 +10,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.30'; +my $V = '0.31'; use Getopt::Long qw(:config no_auto_abbrev); -- cgit v1.2.3-70-g09d2 From cb710eca6820493add0ddd3d7e8e3ee53f2b6e57 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:23:20 -0700 Subject: scripts/checkpatch.pl: add warnings for static char that could be static const char Add warnings for possible missing const uses of static char foo[] = "bar" that could be static const char foo[] = "bar" and static const char *foo[] = {"bar", "baz"} that could be static const char * const foo[] = {"bar", "baz"} Signed-off-by: Joe Perches Cc: Mike Frysinger Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index c1e7fb3eab4..2ec5fc6a404 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1869,6 +1869,18 @@ sub process { $herecurr); } +# check for static const char * arrays. + if ($line =~ /\bstatic\s+const\s+char\s*\*\s*(\w+)\s*\[\s*\]\s*=\s*/) { + WARN("static const char * array should probably be static const char * const\n" . + $herecurr); + } + +# check for static char foo[] = "bar" declarations. + if ($line =~ /\bstatic\s+char\s+(\w+)\s*\[\s*\]\s*=\s*"/) { + WARN("static char array declaration should probably be static const char\n" . + $herecurr); + } + # check for new typedefs, only function parameters and sparse annotations # make sense. if ($line =~ /\btypedef\s/ && -- cgit v1.2.3-70-g09d2 From 93ed0e2d07b25aff4db1d61bfbcd1e82074c0ad5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 Oct 2010 14:23:21 -0700 Subject: scripts/checkpatch.pl: add check for declaration of pci_device_id Signed-off-by: Joe Perches Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'scripts') diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 2ec5fc6a404..90b54d4697f 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1881,6 +1881,11 @@ sub process { $herecurr); } +# check for declarations of struct pci_device_id + if ($line =~ /\bstruct\s+pci_device_id\s+\w+\s*\[\s*\]\s*\=\s*\{/) { + WARN("Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id\n" . $herecurr); + } + # check for new typedefs, only function parameters and sparse annotations # make sense. if ($line =~ /\btypedef\s/ && -- cgit v1.2.3-70-g09d2 From c25f415751c0c5507561d997fe5f7f05f4342912 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Wed, 27 Oct 2010 12:42:00 -0700 Subject: scripts/namespace.pl: fix wrong source path File::Find will do chdir automatically, so we need to get the absolute patch with $File::Find::dir. Reported-by: Stephen Hemminger Signed-off-by: Amerigo Wang Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Michal Marek --- scripts/namespace.pl | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index 361d0f71184..fb4e2456073 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -167,11 +167,11 @@ sub do_nm printf STDERR "$fullname is not an object file\n"; return; } - ($source = $fullname) =~ s/\.o$//; - if (-e "$objtree$source.c" || -e "$objtree$source.S") { - $source = "$objtree$source"; + ($source = $basename) =~ s/\.o$//; + if (-e "$source.c" || -e "$source.S") { + $source = "$objtree$File::Find::dir/$source"; } else { - $source = "$srctree$source"; + $source = "$srctree$File::Find::dir/$source"; } if (! -e "$source.c" && ! -e "$source.S") { # No obvious source, exclude the object if it is conglomerate -- cgit v1.2.3-70-g09d2 From 43f683c9e465a64259c6058a7c313facc697b203 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 27 Oct 2010 12:42:00 -0700 Subject: scripts/namespace.pl: update file exclusion list Signed-off-by: Stephen Hemminger Signed-off-by: Amerigo Wang Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Michal Marek --- scripts/namespace.pl | 103 ++++++++++++++++++++++++++++----------------------- 1 file changed, 56 insertions(+), 47 deletions(-) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index fb4e2456073..c8d0922c3b4 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -84,6 +84,58 @@ my %ksymtab = (); # names that appear in __ksymtab_ my %ref = (); # $ref{$name} exists if there is a true external reference to $name my %export = (); # $export{$name} exists if there is an EXPORT_... of $name +my %nmexception = ( + 'fs/ext3/bitmap' => 1, + 'fs/ext4/bitmap' => 1, + 'arch/x86/lib/thunk_32' => 1, + 'arch/x86/lib/cmpxchg' => 1, + 'arch/x86/vdso/vdso32/note' => 1, + 'lib/irq_regs' => 1, + 'usr/initramfs_data' => 1, + 'drivers/scsi/aic94xx/aic94xx_dump' => 1, + 'drivers/scsi/libsas/sas_dump' => 1, + 'lib/dec_and_lock' => 1, + 'drivers/ide/ide-probe-mini' => 1, + 'usr/initramfs_data' => 1, + 'drivers/acpi/acpia/exdump' => 1, + 'drivers/acpi/acpia/rsdump' => 1, + 'drivers/acpi/acpia/nsdumpdv' => 1, + 'drivers/acpi/acpia/nsdump' => 1, + 'arch/ia64/sn/kernel/sn2/io' => 1, + 'arch/ia64/kernel/gate-data' => 1, + 'security/capability' => 1, + 'fs/ntfs/sysctl' => 1, + 'fs/jfs/jfs_debug' => 1, +); + +my %nameexception = ( + 'mod_use_count_' => 1, + '__initramfs_end' => 1, + '__initramfs_start' => 1, + '_einittext' => 1, + '_sinittext' => 1, + 'kallsyms_names' => 1, + 'kallsyms_num_syms' => 1, + 'kallsyms_addresses'=> 1, + '__this_module' => 1, + '_etext' => 1, + '_edata' => 1, + '_end' => 1, + '__bss_start' => 1, + '_text' => 1, + '_stext' => 1, + '__gp' => 1, + 'ia64_unw_start' => 1, + 'ia64_unw_end' => 1, + '__init_begin' => 1, + '__init_end' => 1, + '__bss_stop' => 1, + '__nosave_begin' => 1, + '__nosave_end' => 1, + 'pg0' => 1, +); + + &find(\&linux_objects, '.'); # find the objects and do_nm on them &list_multiply_defined(); &resolve_external_references(); @@ -270,27 +322,9 @@ sub do_nm close($nmdata); if ($#nmdata < 0) { - if ( - $fullname ne "lib/brlock.o" - && $fullname ne "lib/dec_and_lock.o" - && $fullname ne "fs/xfs/xfs_macros.o" - && $fullname ne "drivers/ide/ide-probe-mini.o" - && $fullname ne "usr/initramfs_data.o" - && $fullname ne "drivers/acpi/executer/exdump.o" - && $fullname ne "drivers/acpi/resources/rsdump.o" - && $fullname ne "drivers/acpi/namespace/nsdumpdv.o" - && $fullname ne "drivers/acpi/namespace/nsdump.o" - && $fullname ne "arch/ia64/sn/kernel/sn2/io.o" - && $fullname ne "arch/ia64/kernel/gate-data.o" - && $fullname ne "drivers/ieee1394/oui.o" - && $fullname ne "security/capability.o" - && $fullname ne "sound/core/wrappers.o" - && $fullname ne "fs/ntfs/sysctl.o" - && $fullname ne "fs/jfs/jfs_debug.o" - ) { - printf "No nm data for $fullname\n"; - } - return; + printf "No nm data for $fullname\n" + unless $nmexception{$fullname}; + return; } $nmdata{$fullname} = \@nmdata; } @@ -372,31 +406,7 @@ sub resolve_external_references $ref{$name} = "" } } - elsif ( $name ne "mod_use_count_" - && $name ne "__initramfs_end" - && $name ne "__initramfs_start" - && $name ne "_einittext" - && $name ne "_sinittext" - && $name ne "kallsyms_names" - && $name ne "kallsyms_num_syms" - && $name ne "kallsyms_addresses" - && $name ne "__this_module" - && $name ne "_etext" - && $name ne "_edata" - && $name ne "_end" - && $name ne "__bss_start" - && $name ne "_text" - && $name ne "_stext" - && $name ne "__gp" - && $name ne "ia64_unw_start" - && $name ne "ia64_unw_end" - && $name ne "__init_begin" - && $name ne "__init_end" - && $name ne "__bss_stop" - && $name ne "__nosave_begin" - && $name ne "__nosave_end" - && $name ne "pg0" - && $name ne "__module_text_address" + elsif ( ! $nameexception{$name} && $name !~ /^__sched_text_/ && $name !~ /^__start_/ && $name !~ /^__end_/ @@ -407,7 +417,6 @@ sub resolve_external_references && $name !~ /^__.*per_cpu_end/ && $name !~ /^__alt_instructions/ && $name !~ /^__setup_/ - && $name !~ /^jiffies/ && $name !~ /^__mod_timer/ && $name !~ /^__mod_page_state/ && $name !~ /^init_module/ -- cgit v1.2.3-70-g09d2 From e8cf981346b78ee50c2bfce83be9ee55704b3d4f Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Wed, 27 Oct 2010 12:42:01 -0700 Subject: scripts/namespace.pl: some bug fixes 1. Teach namespace.pl to understand "V" and "v" 2. cond_syscalls are moved into kernel/sys_ni.c Signed-off-by: Amerigo Wang Cc: Stephen Hemminger Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Michal Marek --- scripts/namespace.pl | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index c8d0922c3b4..bccf61044ed 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -266,6 +266,7 @@ sub do_nm # T global label/procedure # U external reference # W weak external reference to text that has been resolved + # V similar to W, but the value of the weak symbol becomes zero with no error. # a assembler equate # b static variable, uninitialised # d static variable, initialised @@ -274,8 +275,9 @@ sub do_nm # s static variable, uninitialised, small bss # t static label/procedures # w weak external reference to text that has not been resolved + # v similar to w # ? undefined type, used a lot by modules - if ($type !~ /^[ABCDGRSTUWabdgrstw?]$/) { + if ($type !~ /^[ABCDGRSTUWVabdgrstwv?]$/) { printf STDERR "nm output for $fullname contains unknown type '$_'\n"; } elsif ($name =~ /\./) { @@ -286,7 +288,7 @@ sub do_nm # binutils keeps changing the type for exported symbols, force it to R $type = 'R' if ($name =~ /^__ksymtab/ || $name =~ /^__kstrtab/); $name =~ s/_R[a-f0-9]{8}$//; # module versions adds this - if ($type =~ /[ABCDGRSTW]/ && + if ($type =~ /[ABCDGRSTWV]/ && $name ne 'init_module' && $name ne 'cleanup_module' && $name ne 'Using_Versions' && @@ -353,11 +355,12 @@ sub list_multiply_defined foreach my $name (keys(%def)) { if ($#{$def{$name}} > 0) { # Special case for cond_syscall - if ($#{$def{$name}} == 1 && $name =~ /^sys_/ && - ($def{$name}[0] eq "kernel/sys.o" || - $def{$name}[1] eq "kernel/sys.o")) { - &drop_def("kernel/sys.o", $name); - next; + if ($#{$def{$name}} == 1 && $name =~ /^sys_/) { + if($def{$name}[0] eq "kernel/sys_ni.o" || + $def{$name}[1] eq "kernel/sys_ni.o") { + &drop_def("kernel/sys_ni.o", $name); + next; + } } # Special case for i386 entry code if ($#{$def{$name}} == 1 && $name =~ /^__kernel_/ && -- cgit v1.2.3-70-g09d2 From abb438526201c6a79949ad45375c051b6681c253 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Wed, 27 Oct 2010 12:42:01 -0700 Subject: scripts/namespace.pl: improve to get more correct results Exclude more symbols from arch/x86/vdso/ and arch/x86/boot/; add some more linker-defined symbols into exception list; add other cond_syscalls besides "sys_*". Signed-off-by: Amerigo Wang Cc: Stephen Hemminger Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Michal Marek --- scripts/namespace.pl | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index bccf61044ed..a71be6b7cde 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -133,6 +133,12 @@ my %nameexception = ( '__nosave_begin' => 1, '__nosave_end' => 1, 'pg0' => 1, + 'vdso_enabled' => 1, + '__stack_chk_fail' => 1, + 'VDSO32_PRELINK' => 1, + 'VDSO32_vsyscall' => 1, + 'VDSO32_rt_sigreturn'=>1, + 'VDSO32_sigreturn' => 1, ); @@ -157,7 +163,8 @@ sub linux_objects if (/.*\.o$/ && ! ( m:/built-in.o$: - || m:arch/x86/kernel/vsyscall-syms.o$: + || m:arch/x86/vdso/: + || m:arch/x86/boot/: || m:arch/ia64/ia32/ia32.o$: || m:arch/ia64/kernel/gate-syms.o$: || m:arch/ia64/lib/__divdi3.o$: @@ -200,6 +207,7 @@ sub linux_objects || m:^.*/\.tmp_: || m:^\.tmp_: || m:/vmlinux-obj.o$: + || m:^tools/: ) ) { do_nm($basename, $_); @@ -355,20 +363,15 @@ sub list_multiply_defined foreach my $name (keys(%def)) { if ($#{$def{$name}} > 0) { # Special case for cond_syscall - if ($#{$def{$name}} == 1 && $name =~ /^sys_/) { + if ($#{$def{$name}} == 1 && + ($name =~ /^sys_/ || $name =~ /^compat_sys_/ || + $name =~ /^sys32_/)) { if($def{$name}[0] eq "kernel/sys_ni.o" || $def{$name}[1] eq "kernel/sys_ni.o") { &drop_def("kernel/sys_ni.o", $name); next; } } - # Special case for i386 entry code - if ($#{$def{$name}} == 1 && $name =~ /^__kernel_/ && - $def{$name}[0] eq "arch/x86/kernel/vsyscall-int80_32.o" && - $def{$name}[1] eq "arch/x86/kernel/vsyscall-sysenter_32.o") { - &drop_def("arch/x86/kernel/vsyscall-sysenter_32.o", $name); - next; - } printf "$name is multiply defined in :-\n"; foreach my $module (@{$def{$name}}) { -- cgit v1.2.3-70-g09d2 From d0f95c782686dbfbb415d533881a06c2bde17ee0 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 22 Oct 2010 23:32:10 +0900 Subject: kbuild: check return value of asprintf() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check return value of asprintf() in docsect() and exit if error occurs. This removes following warning: HOSTCC scripts/basic/docproc scripts/basic/docproc.c: In function ‘docsect’: scripts/basic/docproc.c:336: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result Signed-off-by: Namhyung Kim Acked-by: Randy Dunlap Signed-off-by: Michal Marek --- scripts/basic/docproc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c index fc3b18d844a..98dec87974d 100644 --- a/scripts/basic/docproc.c +++ b/scripts/basic/docproc.c @@ -333,7 +333,10 @@ static void docsect(char *filename, char *line) if (*s == '\n') *s = '\0'; - asprintf(&s, "DOC: %s", line); + if (asprintf(&s, "DOC: %s", line) < 0) { + perror("asprintf"); + exit(1); + } consume_symbol(s); free(s); -- cgit v1.2.3-70-g09d2 From 532cf2907ac3b9c2345d76251764f4f4e602c921 Mon Sep 17 00:00:00 2001 From: Dick Streefland Date: Sat, 23 Oct 2010 00:02:44 +0200 Subject: scripts/extract-ikconfig: add support for bzip2, lzma and lzo Add support for kernels compressed with bzip2, lzma or lzo to the extract-ikconfig script. Fixes kernel bugzilla #19852: https://bugzilla.kernel.org/show_bug.cgi?id=19852 Signed-off-by: Dick Streefland Tested-by: Justin Signed-off-by: Michal Marek --- scripts/extract-ikconfig | 41 +++++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 14 deletions(-) (limited to 'scripts') diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig index 37f30d36c94..1512c0a755a 100755 --- a/scripts/extract-ikconfig +++ b/scripts/extract-ikconfig @@ -7,12 +7,10 @@ # The obscure use of the "tr" filter is to work around older versions of # "grep" that report the byte offset of the line instead of the pattern. # -# (c) 2009, Dick Streefland +# (c) 2009,2010 Dick Streefland # Licensed under the terms of the GNU General Public License. # ---------------------------------------------------------------------- -gz1='\037\213\010' -gz2='01' cf1='IKCFG_ST\037\213\010' cf2='0123456789' @@ -21,11 +19,25 @@ dump_config() if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"` then pos=${pos%%:*} - tail -c+$(($pos+8)) "$1" | zcat -q - exit 0 + tail -c+$(($pos+8)) "$1" | zcat > $tmp1 2> /dev/null + if [ $? != 1 ] + then # exit status must be 0 or 2 (trailing garbage warning) + cat $tmp1 + exit 0 + fi fi } +try_decompress() +{ + for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"` + do + pos=${pos%%:*} + tail -c+$pos "$img" | $3 > $tmp2 2> /dev/null + dump_config $tmp2 + done +} + # Check invocation: me=${0##*/} img=$1 @@ -35,18 +47,19 @@ then exit 2 fi +# Prepare temp files: +tmp1=/tmp/ikconfig$$.1 +tmp2=/tmp/ikconfig$$.2 +trap "rm -f $tmp1 $tmp2" 0 + # Initial attempt for uncompressed images or objects: dump_config "$img" -# That didn't work, so decompress and try again: -tmp=/tmp/ikconfig$$ -trap "rm -f $tmp" 0 -for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"` -do - pos=${pos%%:*} - tail -c+$pos "$img" | zcat 2> /dev/null > $tmp - dump_config $tmp -done +# That didn't work, so retry after decompression. +try_decompress '\037\213\010' xy gunzip +try_decompress 'BZh' xy bunzip2 +try_decompress '\135\0\0\0' xxx unlzma +try_decompress '\211\114\132' xy 'lzop -d' # Bail out: echo "$me: Cannot find kernel config." >&2 -- cgit v1.2.3-70-g09d2 From 24a54f7974a616385b96cd939e004592e2cea484 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 13 Oct 2010 15:58:30 -0700 Subject: namespace: add source file location exceptions Teach namespace checker about some special case files where the source is in unusual location. This fixes many of the source file not found errors (more can be added), and also prevents false positives for functions not being used. Signed-off-by: Stephen Hemminger Signed-off-by: Michal Marek --- scripts/namespace.pl | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index a71be6b7cde..fd2d946fae2 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -141,6 +141,26 @@ my %nameexception = ( 'VDSO32_sigreturn' => 1, ); +# Files with exceptions to source file location +my %sourceloc = ( + 'net/dccp/dccp_probe.o' => 'probe', + 'net/dccp/dccp_ipv4.o' => 'ipv4', + 'net/dccp/dccp_ipv6.o' => 'ipv6', + 'net/dccp/dccp_diag.o' => 'diag', + 'drivers/char/hw_random/rng-core.o' => 'core', + 'fs/fat/msdos.o' => 'namei_msdos', + 'fs/fat/vfat.o' => 'namei_vfat', + 'fs/nfs_common/nfs_acl.o' => 'nfsacl', + 'sound/soundcore.o' => 'sound_core', + 'drivers/md/dm-mirror.o' => 'dm-raid1', + 'drivers/message/i2o/i2o_bus.o' => 'bus-osm', + 'arch/x86/kvm/kvm-amd.o' => 'svm', + 'arch/x86/kvm/kvm-intel.o' => 'vmx', + 'arch/x86/crypto/twofish-x86_64.o' => 'twofish-x86_64-asm_64', + 'arch/x86/crypto/aes-x86_64.o' => 'aes-x86_64-asm_64', + 'arch/x86/crypto/aesni-intel.o' => 'aesni-intel_asm', + 'arch/x86/crypto/salsa20-x86_64.o' => 'salsa20-x86_64-asm_64', +); &find(\&linux_objects, '.'); # find the objects and do_nm on them &list_multiply_defined(); @@ -228,11 +248,15 @@ sub do_nm return; } ($source = $basename) =~ s/\.o$//; + + $source = $sourceloc{$fullname} if ($sourceloc{$fullname}); + if (-e "$source.c" || -e "$source.S") { $source = "$objtree$File::Find::dir/$source"; } else { $source = "$srctree$File::Find::dir/$source"; } + if (! -e "$source.c" && ! -e "$source.S") { # No obvious source, exclude the object if it is conglomerate open(my $objdumpdata, "$objdump $basename|") -- cgit v1.2.3-70-g09d2 From 10247179a7af4f000468e12ae73f3cf657b66235 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 24 Oct 2010 23:37:31 +0200 Subject: Coccinelle: Find nested lock+irqsave functions that use the same flags variables. Signed-off-by: Julia Lawall Signed-off-by: Nicolas Palix Signed-off-by: Michal Marek --- scripts/coccinelle/locks/flags.cocci | 80 ++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 scripts/coccinelle/locks/flags.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/locks/flags.cocci b/scripts/coccinelle/locks/flags.cocci new file mode 100644 index 00000000000..b4344d83809 --- /dev/null +++ b/scripts/coccinelle/locks/flags.cocci @@ -0,0 +1,80 @@ +/// Find nested lock+irqsave functions that use the same flags variables +/// +// Confidence: High +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual context +virtual org +virtual report + +@r@ +expression lock1,lock2,flags; +position p1,p2; +@@ + +( +spin_lock_irqsave@p1(lock1,flags) +| +read_lock_irqsave@p1(lock1,flags) +| +write_lock_irqsave@p1(lock1,flags) +) +... when != flags +( +spin_lock_irqsave(lock1,flags) +| +read_lock_irqsave(lock1,flags) +| +write_lock_irqsave(lock1,flags) +| +spin_lock_irqsave@p2(lock2,flags) +| +read_lock_irqsave@p2(lock2,flags) +| +write_lock_irqsave@p2(lock2,flags) +) + +@d@ +expression f <= r.flags; +expression lock1,lock2,flags; +position r.p1, r.p2; +@@ + +( +*spin_lock_irqsave@p1(lock1,flags) +| +*read_lock_irqsave@p1(lock1,flags) +| +*write_lock_irqsave@p1(lock1,flags) +) +... when != f +( +*spin_lock_irqsave@p2(lock2,flags) +| +*read_lock_irqsave@p2(lock2,flags) +| +*write_lock_irqsave@p2(lock2,flags) +) + +// ---------------------------------------------------------------------- + +@script:python depends on d && org@ +p1 << r.p1; +p2 << r.p2; +@@ + +cocci.print_main("original lock",p1) +cocci.print_secs("nested lock+irqsave that reuses flags",p2) + +@script:python depends on d && report@ +p1 << r.p1; +p2 << r.p2; +@@ + +msg="ERROR: nested lock+irqsave that reuses flags from %s." % (p1[0].line) +coccilib.report.print_report(p2[0], msg) -- cgit v1.2.3-70-g09d2 From 97c1cf8fdbce332bfacc3e38aae3fe2af1369906 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 24 Oct 2010 23:37:32 +0200 Subject: Coccinelle: Find doubled arguments to boolean or bit operators. Signed-off-by: Julia Lawall Signed-off-by: Nicolas Palix Signed-off-by: Michal Marek --- scripts/coccinelle/tests/doublebitand.cocci | 54 +++++++++++++++++++++++++++++ scripts/coccinelle/tests/doubletest.cocci | 40 +++++++++++++++++++++ 2 files changed, 94 insertions(+) create mode 100644 scripts/coccinelle/tests/doublebitand.cocci create mode 100644 scripts/coccinelle/tests/doubletest.cocci (limited to 'scripts') diff --git a/scripts/coccinelle/tests/doublebitand.cocci b/scripts/coccinelle/tests/doublebitand.cocci new file mode 100644 index 00000000000..9ba73d05a77 --- /dev/null +++ b/scripts/coccinelle/tests/doublebitand.cocci @@ -0,0 +1,54 @@ +/// Find bit operations that include the same argument more than once +//# One source of false positives is when the argument performs a side +//# effect. Another source of false positives is when a neutral value +//# such as 0 for | is used to indicate no information, to maintain the +//# same structure as other similar expressions +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual context +virtual org +virtual report + +@r expression@ +expression E; +position p; +@@ + +( +* E@p + & ... & E +| +* E@p + | ... | E +| +* E@p + & ... & !E +| +* E@p + | ... | !E +| +* !E@p + & ... & E +| +* !E@p + | ... | E +) + +@script:python depends on org@ +p << r.p; +@@ + +cocci.print_main("duplicated argument to & or |",p) + +@script:python depends on report@ +p << r.p; +@@ + +coccilib.report.print_report(p[0],"duplicated argument to & or |") diff --git a/scripts/coccinelle/tests/doubletest.cocci b/scripts/coccinelle/tests/doubletest.cocci new file mode 100644 index 00000000000..13a2c0e8a4b --- /dev/null +++ b/scripts/coccinelle/tests/doubletest.cocci @@ -0,0 +1,40 @@ +/// Find &&/|| operations that include the same argument more than once +//# A common source of false positives is when the argument performs a side +//# effect. +/// +// Confidence: Moderate +// Copyright: (C) 2010 Nicolas Palix, DIKU. GPLv2. +// Copyright: (C) 2010 Julia Lawall, DIKU. GPLv2. +// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6. GPLv2. +// URL: http://coccinelle.lip6.fr/ +// Comments: +// Options: -no_includes -include_headers + +virtual context +virtual org +virtual report + +@r expression@ +expression E; +position p; +@@ + +( +* E@p + || ... || E +| +* E@p + && ... && E +) + +@script:python depends on org@ +p << r.p; +@@ + +cocci.print_main("duplicated argument to && or ||",p) + +@script:python depends on report@ +p << r.p; +@@ + +coccilib.report.print_report(p[0],"duplicated argument to && or ||") -- cgit v1.2.3-70-g09d2 From 062c1825a5f6673746efe5f0a5ea3803b0c316a9 Mon Sep 17 00:00:00 2001 From: Nicolas Palix Date: Sun, 24 Oct 2010 23:37:34 +0200 Subject: Coccinelle: Add contextual message Change the message displayed to the user according to the current mode used. Fix trailing white-space and spelling Signed-off-by: Nicolas Palix Signed-off-by: Michal Marek --- scripts/coccicheck | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/coccicheck b/scripts/coccicheck index 7529af15672..1bb1a1bd2da 100755 --- a/scripts/coccicheck +++ b/scripts/coccicheck @@ -32,7 +32,7 @@ if [ "$MODE" = "" ] ; then fi MODE="chain" elif [ "$MODE" = "report" -o "$MODE" = "org" ] ; then - FLAGS="$FLAGS -no_show_diff" + FLAGS="$FLAGS -no_show_diff" fi if [ "$ONLINE" = "0" ] ; then @@ -47,7 +47,7 @@ coccinelle () { OPT=`grep "Option" $COCCI | cut -d':' -f2` -# The option '-parse_cocci' can be used to syntaxically check the SmPL files. +# The option '-parse_cocci' can be used to syntactically check the SmPL files. # # $SPATCH -D $MODE $FLAGS -parse_cocci $COCCI $OPT > /dev/null @@ -62,7 +62,17 @@ coccinelle () { sed -ne 's|^///||p' $COCCI - echo ' The semantic patch that makes this change is available' + if [ "$MODE" = "patch" ] ; then + echo ' The semantic patch that makes this change is available' + elif [ "$MODE" = "report" ] ; then + echo ' The semantic patch that makes this report is available' + elif [ "$MODE" = "context" ] ; then + echo ' The semantic patch that spots this code is available' + elif [ "$MODE" = "org" ] ; then + echo ' The semantic patch that makes this Org report is available' + else + echo ' The semantic patch that makes this output is available' + fi echo " in $FILE." echo '' echo ' More information about semantic patching is available at' -- cgit v1.2.3-70-g09d2 From 9231d9e02a1f92b52bbb1e4474bfd1903835a993 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Thu, 28 Oct 2010 00:59:56 +0200 Subject: Revert "namespace: add source file location exceptions" This reverts commit 24a54f7974a616385b96cd939e004592e2cea484. Stephen Hemminger writes: > That patch should not be included. It causes more problems than it > solves, since then there are duplicate file locations which causes > false duplicate symbol reports. Reported-by: Stephen Hemminger Signed-off-by: Michal Marek --- scripts/namespace.pl | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'scripts') diff --git a/scripts/namespace.pl b/scripts/namespace.pl index fd2d946fae2..a71be6b7cde 100755 --- a/scripts/namespace.pl +++ b/scripts/namespace.pl @@ -141,26 +141,6 @@ my %nameexception = ( 'VDSO32_sigreturn' => 1, ); -# Files with exceptions to source file location -my %sourceloc = ( - 'net/dccp/dccp_probe.o' => 'probe', - 'net/dccp/dccp_ipv4.o' => 'ipv4', - 'net/dccp/dccp_ipv6.o' => 'ipv6', - 'net/dccp/dccp_diag.o' => 'diag', - 'drivers/char/hw_random/rng-core.o' => 'core', - 'fs/fat/msdos.o' => 'namei_msdos', - 'fs/fat/vfat.o' => 'namei_vfat', - 'fs/nfs_common/nfs_acl.o' => 'nfsacl', - 'sound/soundcore.o' => 'sound_core', - 'drivers/md/dm-mirror.o' => 'dm-raid1', - 'drivers/message/i2o/i2o_bus.o' => 'bus-osm', - 'arch/x86/kvm/kvm-amd.o' => 'svm', - 'arch/x86/kvm/kvm-intel.o' => 'vmx', - 'arch/x86/crypto/twofish-x86_64.o' => 'twofish-x86_64-asm_64', - 'arch/x86/crypto/aes-x86_64.o' => 'aes-x86_64-asm_64', - 'arch/x86/crypto/aesni-intel.o' => 'aesni-intel_asm', - 'arch/x86/crypto/salsa20-x86_64.o' => 'salsa20-x86_64-asm_64', -); &find(\&linux_objects, '.'); # find the objects and do_nm on them &list_multiply_defined(); @@ -248,15 +228,11 @@ sub do_nm return; } ($source = $basename) =~ s/\.o$//; - - $source = $sourceloc{$fullname} if ($sourceloc{$fullname}); - if (-e "$source.c" || -e "$source.S") { $source = "$objtree$File::Find::dir/$source"; } else { $source = "$srctree$File::Find::dir/$source"; } - if (! -e "$source.c" && ! -e "$source.S") { # No obvious source, exclude the object if it is conglomerate open(my $objdumpdata, "$objdump $basename|") -- cgit v1.2.3-70-g09d2 From d63f6d1b4d3ad0d88685a5f8eb1c3cac01ddd0db Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Oct 2010 16:11:53 -0400 Subject: initramfs: Fix build break on symbol-prefixed archs Signed-off-by: Mike Frysinger Signed-off-by: Michal Marek --- scripts/Makefile.lib | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 54fd1b70013..e93525c5e91 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -128,7 +128,9 @@ _c_flags += $(if $(patsubst n%,, \ endif ifdef CONFIG_SYMBOL_PREFIX -_cpp_flags += -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX)) +_sym_flags = -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX)) +_cpp_flags += $(_sym_flags) +_a_flags += $(_sym_flags) endif -- cgit v1.2.3-70-g09d2 From 4908980b241bc639b71ef47b727b4bc7c0174afe Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 29 Oct 2010 00:56:46 -0400 Subject: kconfig: Make localmodconfig handle environment variables The commit 838a2e55e6a4e9e8a10451ed2ef0f7a08dabdb04 kbuild: migrate all arch to the kconfig mainmenu upgrade Broke make localmodconfig. The reason was that it added a environment variable to the kconfig source, which the streamline_config.pl could not handle. This patch changes streamline_config.pl to handle kconfig sources using environment variables in their names. Cc: Arnaud Lacombe Cc: Sam Ravnborg Cc: Michal Marek Signed-off-by: Steven Rostedt --- scripts/kconfig/streamline_config.pl | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index c70a27d924f..cc10bcfda64 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -137,7 +137,17 @@ sub read_kconfig { my $config; my @kconfigs; - open(KIN, "$ksource/$kconfig") || die "Can't open $kconfig"; + my $source = "$ksource/$kconfig"; + my $last_source = ""; + + # Check for any environment variables used + while ($source =~ /\$(\w+)/ && $last_source ne $source) { + my $env = $1; + $last_source = $source; + $source =~ s/\$$env/$ENV{$env}/; + } + + open(KIN, "$source") || die "Can't open $kconfig"; while () { chomp; -- cgit v1.2.3-70-g09d2 From ccece60ac69608c496b07c0d31a68894db0a22b3 Mon Sep 17 00:00:00 2001 From: hiromu yagura Date: Sun, 15 Aug 2010 13:13:17 +0900 Subject: kconfig: Fix variable name typo %prompts in streamline_config.pl When I added "use strict;" to streamline_config.pl, I saw the following warnings: > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 183. > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 368. The declaration of %prompt was incorrect, and should have been %prompts. Cc: Toralf Foerster Cc: KAMEZAWA Hiroyuki Cc: YOSHIFUJI Hideaki Signed-off-by: Hiromu Yakura LKML-Reference: <1281845597.11566.5.camel@camp10-laptop> Signed-off-by: Steven Rostedt --- scripts/kconfig/streamline_config.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index cc10bcfda64..3c63aa943ee 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -188,7 +188,7 @@ sub read_kconfig { # configs without prompts must be selected } elsif ($state ne "NONE" && /^\s*tristate\s\S/) { # note if the config has a prompt - $prompt{$config} = 1; + $prompts{$config} = 1; # Check for if statements } elsif (/^if\s+(.*\S)\s*$/) { @@ -373,7 +373,7 @@ while ($repeat) { parse_config_dep_select $depends{$config}; } - if (defined($prompt{$config}) || !defined($selects{$config})) { + if (defined($prompts{$config}) || !defined($selects{$config})) { next; } -- cgit v1.2.3-70-g09d2 From cf5a189d4a02efb3712cfb424452f4ce3ab7c4a2 Mon Sep 17 00:00:00 2001 From: hiromu Date: Tue, 17 Aug 2010 19:49:18 +0900 Subject: kconfig: Fix missing declaration of variable $dir in streamline_config.pl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Fri, Aug 17, 2010 at 01:43PM +0800, Américo Wang wrote: > Acked-by: WANG Cong > > BTW, I think we should add "use strict;" too. Then I added "use strict;" to streamline_config.pl, I saw another warning. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 286. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 287. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 288. Then I added "my $dir;" to line 285. Cc: Américo Wang Cc: Toralf Foerster Cc: KAMEZAWA Hiroyuki Cc: YOSHIFUJI Hideaki Signed-off-by: Hiromu Yakura LKML-Reference: <1282042158.7160.9.camel@hiromu-Macbook> [ changed to just add my in front of $dir instead of new line ] Signed-off-by: Steven Rostedt --- scripts/kconfig/streamline_config.pl | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 3c63aa943ee..883748c70d2 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -42,6 +42,8 @@ # mv config_strip .config # make oldconfig # +use strict; + my $config = ".config"; my $uname = `uname -r`; @@ -291,7 +293,7 @@ if (defined($lsmod_file)) { # see what modules are loaded on this system my $lsmod; - foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { + foreach my $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { if ( -x "$dir/lsmod" ) { $lsmod = "$dir/lsmod"; last; -- cgit v1.2.3-70-g09d2 From 20d190473328b90755eb2434cf2d26b73a53ef23 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 28 Oct 2010 22:13:51 -0400 Subject: kconfig: Fix streamline_config to read multi line deps in Kconfig files I noticed that some Kconfig files have multi line dependencies that continue with a backslash. Those dependencies on the next line will be missed by streamline_config. For example: config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ || ARCH_IXDP2X01 || MACH_MX31ADS) The "|| ARCH_IXDP2X01 || MACH_MX31ADS)" will not be processed. This patch adds code to handle this case. Signed-off-by: Steven Rostedt --- scripts/kconfig/streamline_config.pl | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 883748c70d2..ebba407ac5e 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -125,7 +125,6 @@ my %selects; my %prompts; my %objects; my $var; -my $cont = 0; my $iflevel = 0; my @ifdeps; @@ -139,6 +138,9 @@ sub read_kconfig { my $config; my @kconfigs; + my $cont = 0; + my $line; + my $source = "$ksource/$kconfig"; my $last_source = ""; @@ -153,6 +155,19 @@ sub read_kconfig { while () { chomp; + # Make sure that lines ending with \ continue + if ($cont) { + $_ = $line . " " . $_; + } + + if (s/\\$//) { + $cont = 1; + $line = $_; + next; + } + + $cont = 0; + # collect any Kconfig sources if (/^source\s*"(.*)"/) { $kconfigs[$#kconfigs+1] = $1; @@ -230,6 +245,8 @@ if ($kconfig) { # Read all Makefiles to map the configs to the objects foreach my $makefile (@makefiles) { + my $cont = 0; + open(MIN,$makefile) || die "Can't open $makefile"; while () { my $objs; -- cgit v1.2.3-70-g09d2 From 8ef17fa2ef8be74b946e725c2afb0e2a54981da1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 28 Oct 2010 22:21:57 -0400 Subject: kconfig: Have streamline_config process menuconfigs too Some menuconfigs in the Kconfig files have prompts and dependencies. Currently, streamline_config misses these, and this can cause streamline_config to keep modules enabled that should not be, and even worse, not enable those that should. This patch makes streamline_config process menuconfigs just like it would process a config. Reported-by: member graysky Signed-off-by: Steven Rostedt --- scripts/kconfig/streamline_config.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index ebba407ac5e..fd81fc33d63 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -174,9 +174,9 @@ sub read_kconfig { } # configs found - if (/^\s*config\s+(\S+)\s*$/) { + if (/^\s*(menu)?config\s+(\S+)\s*$/) { $state = "NEW"; - $config = $1; + $config = $2; for (my $i = 0; $i < $iflevel; $i++) { if ($i) { -- cgit v1.2.3-70-g09d2 From a2d49358ba9bc93204dc001d5568c5bdb299b77d Mon Sep 17 00:00:00 2001 From: John Reiser Date: Wed, 27 Oct 2010 18:59:07 +0800 Subject: ftrace/MIPS: Add MIPS64 support for C version of recordmcount MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount will not work for "segmentation fault". Usage of "union mips_r_info" and the functions MIPS64_r_sym() and MIPS64_r_info() written by Maciej W. Rozycki ---- [1] http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf [2] arch/mips/include/asm/module.h Tested-by: Wu Zhangjin Signed-off-by: John Reiser Signed-off-by: Maciej W. Rozycki LKML-Reference: LKML-Reference: <910dc2d5ae1ed042df4f96815fe4a433078d1c2a.1288176026.git.wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt Signed-off-by: Ralf Baechle --- scripts/recordmcount.c | 41 +++++++++++++++++++++++++++++++++++++++++ scripts/recordmcount.h | 34 ++++++++++++++++++++++++++++++---- 2 files changed, 71 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 26e1271259b..2d32b9ced20 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -217,6 +217,39 @@ is_mcounted_section_name(char const *const txtname) #define RECORD_MCOUNT_64 #include "recordmcount.h" +/* 64-bit EM_MIPS has weird ELF64_Rela.r_info. + * http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf + * We interpret Table 29 Relocation Operation (Elf64_Rel, Elf64_Rela) [p.40] + * to imply the order of the members; the spec does not say so. + * typedef unsigned char Elf64_Byte; + * fails on MIPS64 because their already has it! + */ + +typedef uint8_t myElf64_Byte; /* Type for a 8-bit quantity. */ + +union mips_r_info { + Elf64_Xword r_info; + struct { + Elf64_Word r_sym; /* Symbol index. */ + myElf64_Byte r_ssym; /* Special symbol. */ + myElf64_Byte r_type3; /* Third relocation. */ + myElf64_Byte r_type2; /* Second relocation. */ + myElf64_Byte r_type; /* First relocation. */ + } r_mips; +}; + +static uint64_t MIPS64_r_sym(Elf64_Rel const *rp) +{ + return w(((union mips_r_info){ .r_info = rp->r_info }).r_mips.r_sym); +} + +static void MIPS64_r_info(Elf64_Rel *const rp, unsigned sym, unsigned type) +{ + rp->r_info = ((union mips_r_info){ + .r_mips = { .r_sym = w(sym), .r_type = type } + }).r_info; +} + static void do_file(char const *const fname) { @@ -268,6 +301,7 @@ do_file(char const *const fname) case EM_386: reltype = R_386_32; break; case EM_ARM: reltype = R_ARM_ABS32; break; case EM_IA_64: reltype = R_IA64_IMM64; gpfx = '_'; break; + case EM_MIPS: /* reltype: e_class */ gpfx = '_'; break; case EM_PPC: reltype = R_PPC_ADDR32; gpfx = '_'; break; case EM_PPC64: reltype = R_PPC64_ADDR64; gpfx = '_'; break; case EM_S390: /* reltype: e_class */ gpfx = '_'; break; @@ -291,6 +325,8 @@ do_file(char const *const fname) } if (EM_S390 == w2(ehdr->e_machine)) reltype = R_390_32; + if (EM_MIPS == w2(ehdr->e_machine)) + reltype = R_MIPS_32; do32(ehdr, fname, reltype); } break; case ELFCLASS64: { @@ -303,6 +339,11 @@ do_file(char const *const fname) } if (EM_S390 == w2(ghdr->e_machine)) reltype = R_390_64; + if (EM_MIPS == w2(ghdr->e_machine)) { + reltype = R_MIPS_64; + Elf64_r_sym = MIPS64_r_sym; + Elf64_r_info = MIPS64_r_info; + } do64(ghdr, fname, reltype); } break; } /* end switch */ diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h index 7f39d0943d2..190fd18dc85 100644 --- a/scripts/recordmcount.h +++ b/scripts/recordmcount.h @@ -31,8 +31,12 @@ #undef Elf_Rela #undef Elf_Sym #undef ELF_R_SYM +#undef Elf_r_sym #undef ELF_R_INFO +#undef Elf_r_info #undef ELF_ST_BIND +#undef fn_ELF_R_SYM +#undef fn_ELF_R_INFO #undef uint_t #undef _w #undef _align @@ -52,8 +56,12 @@ # define Elf_Rela Elf64_Rela # define Elf_Sym Elf64_Sym # define ELF_R_SYM ELF64_R_SYM +# define Elf_r_sym Elf64_r_sym # define ELF_R_INFO ELF64_R_INFO +# define Elf_r_info Elf64_r_info # define ELF_ST_BIND ELF64_ST_BIND +# define fn_ELF_R_SYM fn_ELF64_R_SYM +# define fn_ELF_R_INFO fn_ELF64_R_INFO # define uint_t uint64_t # define _w w8 # define _align 7u @@ -72,14 +80,32 @@ # define Elf_Rela Elf32_Rela # define Elf_Sym Elf32_Sym # define ELF_R_SYM ELF32_R_SYM +# define Elf_r_sym Elf32_r_sym # define ELF_R_INFO ELF32_R_INFO +# define Elf_r_info Elf32_r_info # define ELF_ST_BIND ELF32_ST_BIND +# define fn_ELF_R_SYM fn_ELF32_R_SYM +# define fn_ELF_R_INFO fn_ELF32_R_INFO # define uint_t uint32_t # define _w w # define _align 3u # define _size 4 #endif +/* Functions and pointers that 64-bit EM_MIPS can override. */ +static uint_t fn_ELF_R_SYM(Elf_Rel const *rp) +{ + return ELF_R_SYM(_w(rp->r_info)); +} +static uint_t (*Elf_r_sym)(Elf_Rel const *rp) = fn_ELF_R_SYM; + +static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type) +{ + rp->r_info = ELF_R_INFO(sym, type); +} +static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO; + + /* Append the new shstrtab, Elf_Shdr[], __mcount_loc and its relocations. */ static void append_func(Elf_Ehdr *const ehdr, Elf_Shdr *const shstr, @@ -197,22 +223,22 @@ static uint_t *sift_rel_mcount(uint_t *mlocp, for (t = nrel; t; --t) { if (!mcountsym) { Elf_Sym const *const symp = - &sym0[ELF_R_SYM(_w(relp->r_info))]; + &sym0[Elf_r_sym(relp)]; char const *symname = &str0[w(symp->st_name)]; if ('.' == symname[0]) ++symname; /* ppc64 hack */ if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), symname)) - mcountsym = ELF_R_SYM(_w(relp->r_info)); + mcountsym = Elf_r_sym(relp); } - if (mcountsym == ELF_R_SYM(_w(relp->r_info))) { + if (mcountsym == Elf_r_sym(relp)) { uint_t const addend = _w(_w(relp->r_offset) - recval); mrelp->r_offset = _w(offbase + ((void *)mlocp - (void *)mloc0)); - mrelp->r_info = _w(ELF_R_INFO(recsym, reltype)); + Elf_r_info(mrelp, recsym, reltype); if (sizeof(Elf_Rela) == rel_entsize) { ((Elf_Rela *)mrelp)->r_addend = addend; *mlocp++ = 0; -- cgit v1.2.3-70-g09d2 From 412910cd046c1f14f0fba9c0aec401d47e57dcd1 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 27 Oct 2010 18:59:08 +0800 Subject: ftrace/MIPS: Add module support for C version of recordmcount Since MIPS modules' address space differs from the core kernel space, to access the _mcount in the core kernel, the kernel functions in modules must use long call (-mlong-calls): load the _mcount address into one register and jump to the address stored by the register: c: 3c030000 lui v1,0x0 <--------> b label c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 label: In the old Perl version of recordmcount, we only need to record the position of the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace the instruction in this position by a "b label" and in ftrace_make_call(), replace it back. But, the default C version of recordmcount records all of the _mcount symbols, so, we must filter the 2nd _mcount like the Perl version of recordmcount does. The C version of recordmcount copes with the symbols before they are linked, So It doesn't know the type of the symbols and therefore can not filter the symbols as the Perl version of recordmcount does. But as we can see above, the 2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of the same long call, which means the offset from the 1st to the 2nd is fixed, it is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has fixed length of instructions, this offset is always 4. And as we know, the _mcount is inserted into the entry of every kernel function, the offset between the other _mcount's is expected to be always bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can simply check the offset between two _mcount symbols, If it is 4, then, filter the 2nd _mcount symbol. To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is added for all of the archs, and the specific archs can override it via chaning the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount() pointed by is_fake_mcount. This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd _mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped to one real mcount call, so, one of them is fake and must be filtered. This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the _mcount symbols and before adding the _mcount symbol into mrelp, so, it can prevent the fake mcount symbol going into the last __mcount_loc table. Signed-off-by: Wu Zhangjin LKML-Reference: Signed-off-by: Steven Rostedt Signed-off-by: Ralf Baechle --- scripts/recordmcount.c | 5 ++++- scripts/recordmcount.h | 56 +++++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 57 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 2d32b9ced20..f2f32eee2c5 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -325,8 +325,10 @@ do_file(char const *const fname) } if (EM_S390 == w2(ehdr->e_machine)) reltype = R_390_32; - if (EM_MIPS == w2(ehdr->e_machine)) + if (EM_MIPS == w2(ehdr->e_machine)) { reltype = R_MIPS_32; + is_fake_mcount32 = MIPS32_is_fake_mcount; + } do32(ehdr, fname, reltype); } break; case ELFCLASS64: { @@ -343,6 +345,7 @@ do_file(char const *const fname) reltype = R_MIPS_64; Elf64_r_sym = MIPS64_r_sym; Elf64_r_info = MIPS64_r_info; + is_fake_mcount64 = MIPS64_is_fake_mcount; } do64(ghdr, fname, reltype); } break; diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h index 190fd18dc85..58e933a2054 100644 --- a/scripts/recordmcount.h +++ b/scripts/recordmcount.h @@ -19,12 +19,16 @@ * Licensed under the GNU General Public License, version 2 (GPLv2). */ #undef append_func +#undef is_fake_mcount +#undef fn_is_fake_mcount +#undef MIPS_is_fake_mcount #undef sift_rel_mcount #undef find_secsym_ndx #undef __has_rel_mcount #undef has_rel_mcount #undef tot_relsize #undef do_func +#undef Elf_Addr #undef Elf_Ehdr #undef Elf_Shdr #undef Elf_Rel @@ -50,6 +54,10 @@ # define has_rel_mcount has64_rel_mcount # define tot_relsize tot64_relsize # define do_func do64 +# define is_fake_mcount is_fake_mcount64 +# define fn_is_fake_mcount fn_is_fake_mcount64 +# define MIPS_is_fake_mcount MIPS64_is_fake_mcount +# define Elf_Addr Elf64_Addr # define Elf_Ehdr Elf64_Ehdr # define Elf_Shdr Elf64_Shdr # define Elf_Rel Elf64_Rel @@ -74,6 +82,10 @@ # define has_rel_mcount has32_rel_mcount # define tot_relsize tot32_relsize # define do_func do32 +# define is_fake_mcount is_fake_mcount32 +# define fn_is_fake_mcount fn_is_fake_mcount32 +# define MIPS_is_fake_mcount MIPS32_is_fake_mcount +# define Elf_Addr Elf32_Addr # define Elf_Ehdr Elf32_Ehdr # define Elf_Shdr Elf32_Shdr # define Elf_Rel Elf32_Rel @@ -92,7 +104,13 @@ # define _size 4 #endif -/* Functions and pointers that 64-bit EM_MIPS can override. */ +/* Functions and pointers that do_file() may override for specific e_machine. */ +static int fn_is_fake_mcount(Elf_Rel const *rp) +{ + return 0; +} +static int (*is_fake_mcount)(Elf_Rel const *rp) = fn_is_fake_mcount; + static uint_t fn_ELF_R_SYM(Elf_Rel const *rp) { return ELF_R_SYM(_w(rp->r_info)); @@ -105,6 +123,39 @@ static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type) } static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO; +/* + * MIPS mcount long call has 2 _mcount symbols, only the position of the 1st + * _mcount symbol is needed for dynamic function tracer, with it, to disable + * tracing(ftrace_make_nop), the instruction in the position is replaced with + * the "b label" instruction, to enable tracing(ftrace_make_call), replace the + * instruction back. So, here, we set the 2nd one as fake and filter it. + * + * c: 3c030000 lui v1,0x0 <--> b label + * c: R_MIPS_HI16 _mcount + * c: R_MIPS_NONE *ABS* + * c: R_MIPS_NONE *ABS* + * 10: 64630000 daddiu v1,v1,0 + * 10: R_MIPS_LO16 _mcount + * 10: R_MIPS_NONE *ABS* + * 10: R_MIPS_NONE *ABS* + * 14: 03e0082d move at,ra + * 18: 0060f809 jalr v1 + * label: + */ +#define MIPS_FAKEMCOUNT_OFFSET 4 + +static int MIPS_is_fake_mcount(Elf_Rel const *rp) +{ + static Elf_Addr old_r_offset; + Elf_Addr current_r_offset = _w(rp->r_offset); + int is_fake; + + is_fake = old_r_offset && + (current_r_offset - old_r_offset == MIPS_FAKEMCOUNT_OFFSET); + old_r_offset = current_r_offset; + + return is_fake; +} /* Append the new shstrtab, Elf_Shdr[], __mcount_loc and its relocations. */ static void append_func(Elf_Ehdr *const ehdr, @@ -183,7 +234,6 @@ static void append_func(Elf_Ehdr *const ehdr, uwrite(fd_map, ehdr, sizeof(*ehdr)); } - /* * Look at the relocations in order to find the calls to mcount. * Accumulate the section offsets that are found, and their relocation info, @@ -233,7 +283,7 @@ static uint_t *sift_rel_mcount(uint_t *mlocp, mcountsym = Elf_r_sym(relp); } - if (mcountsym == Elf_r_sym(relp)) { + if (mcountsym == Elf_r_sym(relp) && !is_fake_mcount(relp)) { uint_t const addend = _w(_w(relp->r_offset) - recval); mrelp->r_offset = _w(offbase -- cgit v1.2.3-70-g09d2 From 4882720b267b7b1d1b0ce08334b205f0329d4615 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 7 Sep 2010 14:34:01 +0000 Subject: semaphore: Remove mutex emulation Semaphores used as mutexes have been deprecated for years. Now that all users are either converted to real semaphores or to mutexes remove the cruft. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Christoph Hellwig LKML-Reference: <20100907125057.562399240@linutronix.de> --- include/linux/semaphore.h | 6 ------ scripts/checkpatch.pl | 8 ++------ 2 files changed, 2 insertions(+), 12 deletions(-) (limited to 'scripts') diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h index 5310d27abd2..39fa04966aa 100644 --- a/include/linux/semaphore.h +++ b/include/linux/semaphore.h @@ -29,9 +29,6 @@ struct semaphore { #define DEFINE_SEMAPHORE(name) \ struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1) -#define DECLARE_MUTEX(name) \ - struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1) - static inline void sema_init(struct semaphore *sem, int val) { static struct lock_class_key __key; @@ -39,9 +36,6 @@ static inline void sema_init(struct semaphore *sem, int val) lockdep_init_map(&sem->lock.dep_map, "semaphore->lock", &__key, 0); } -#define init_MUTEX(sem) sema_init(sem, 1) -#define init_MUTEX_LOCKED(sem) sema_init(sem, 0) - extern void down(struct semaphore *sem); extern int __must_check down_interruptible(struct semaphore *sem); extern int __must_check down_killable(struct semaphore *sem); diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 90b54d4697f..e3c7fc0dca3 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2794,12 +2794,8 @@ sub process { WARN("__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr); } -# check for semaphores used as mutexes - if ($line =~ /^.\s*(DECLARE_MUTEX|init_MUTEX)\s*\(/) { - WARN("mutexes are preferred for single holder semaphores\n" . $herecurr); - } -# check for semaphores used as mutexes - if ($line =~ /^.\s*init_MUTEX_LOCKED\s*\(/) { +# check for semaphores initialized locked + if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) { WARN("consider using a completion\n" . $herecurr); } -- cgit v1.2.3-70-g09d2 From 020e773f6b2e797a13d23723773ed1b3ba2c35dc Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 1 Nov 2010 21:01:44 +0000 Subject: kconfig: sym_expand_string_value: allow for string termination when reallocing When expanding a parameterised string we may run out of space, this triggers a realloc. When computing the new allocation size we do not allow for the terminating '\0'. Allow for this when calculating the new length. Signed-off-by: Andy Whitcroft Signed-off-by: Linus Torvalds --- scripts/kconfig/symbol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index c0efe102d65..af6e9f3de95 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -875,7 +875,7 @@ const char *sym_expand_string_value(const char *in) symval = sym_get_string_value(sym); } - newlen = strlen(res) + strlen(symval) + strlen(src); + newlen = strlen(res) + strlen(symval) + strlen(src) + 1; if (newlen > reslen) { reslen = newlen; res = realloc(res, reslen); -- cgit v1.2.3-70-g09d2 From 2b35f4d9cab365d37c7b34ce51e1c1144c312d05 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Nov 2010 12:27:31 -0800 Subject: kernel-doc: escape xml for structs scripts/kernel-doc was leaving unescaped '<', '>', and '&' in generated xml output for structs. This causes xml parser errors. Convert these characters to "<", ">", and "&" as needed to prevent errors. Most of the conversion was already done; complete it just before output. Documentation/DocBook/device-drivers.xml:41883: parser error : StartTag: invalid element name #define INPUT_KEYMAP_BY_INDEX (1 << 0) Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/kernel-doc b/scripts/kernel-doc index cdb6dc1f645..39580a5dc5d 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -5,7 +5,7 @@ use strict; ## Copyright (c) 1998 Michael Zucchi, All Rights Reserved ## ## Copyright (C) 2000, 1 Tim Waugh ## ## Copyright (C) 2001 Simon Huggins ## -## Copyright (C) 2005-2009 Randy Dunlap ## +## Copyright (C) 2005-2010 Randy Dunlap ## ## ## ## #define enhancements by Armin Kuster ## ## Copyright (c) 2000 MontaVista Software, Inc. ## @@ -453,7 +453,7 @@ sub output_highlight { if ($output_mode eq "html" || $output_mode eq "xml") { $contents = local_unescape($contents); # convert data read & converted thru xml_escape() into &xyz; format: - $contents =~ s/\\\\\\/&/g; + $contents =~ s/\\\\\\/\&/g; } # print STDERR "contents b4:$contents\n"; eval $dohighlight; @@ -770,7 +770,11 @@ sub output_struct_xml(%) { print $args{'type'} . " " . $args{'struct'} . " {\n"; foreach $parameter (@{$args{'parameterlist'}}) { if ($parameter =~ /^#/) { - print "$parameter\n"; + my $prm = $parameter; + # convert data read & converted thru xml_escape() into &xyz; format: + # This allows us to have #define macros interspersed in a struct. + $prm =~ s/\\\\\\/\&/g; + print "$prm\n"; next; } @@ -1701,6 +1705,8 @@ sub push_parameter($$$) { } } + $param = xml_escape($param); + # strip spaces from $param so that it is one continous string # on @parameterlist; # this fixes a problem where check_sections() cannot find -- cgit v1.2.3-70-g09d2 From 86e187ff9bce9fbed7bfed92ae34f491cf1af50f Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:23 -0300 Subject: kconfig: add an option to determine a menu's visibility This option is aimed to add the possibility to control a menu's visibility without adding dependency to the expression to all the submenu. Signed-off-by: Arnaud Lacombe Acked-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- scripts/kconfig/expr.h | 1 + scripts/kconfig/lkc.h | 1 + scripts/kconfig/menu.c | 11 +++++++++++ scripts/kconfig/zconf.gperf | 1 + scripts/kconfig/zconf.y | 21 ++++++++++++++++++--- 5 files changed, 32 insertions(+), 3 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 184eb6a0b50..e57826ced38 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -164,6 +164,7 @@ struct menu { struct menu *list; struct symbol *sym; struct property *prompt; + struct expr *visibility; struct expr *dep; unsigned int flags; char *help; diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h index 753cdbd7b80..3f7240df0f3 100644 --- a/scripts/kconfig/lkc.h +++ b/scripts/kconfig/lkc.h @@ -107,6 +107,7 @@ void menu_end_menu(void); void menu_add_entry(struct symbol *sym); void menu_end_entry(void); void menu_add_dep(struct expr *dep); +void menu_add_visibility(struct expr *dep); struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep); struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 7e83aef42c6..b9d9aa18e6d 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -152,6 +152,12 @@ struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr return menu_add_prop(type, prompt, NULL, dep); } +void menu_add_visibility(struct expr *expr) +{ + current_entry->visibility = expr_alloc_and(current_entry->visibility, + expr); +} + void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep) { menu_add_prop(type, NULL, expr, dep); @@ -410,6 +416,11 @@ bool menu_is_visible(struct menu *menu) if (!menu->prompt) return false; + if (menu->visibility) { + if (expr_calc_value(menu->visibility) == no) + return no; + } + sym = menu->sym; if (sym) { sym_calc_value(sym); diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf index d8bc7424962..c9e690eb754 100644 --- a/scripts/kconfig/zconf.gperf +++ b/scripts/kconfig/zconf.gperf @@ -38,6 +38,7 @@ hex, T_TYPE, TF_COMMAND, S_HEX string, T_TYPE, TF_COMMAND, S_STRING select, T_SELECT, TF_COMMAND range, T_RANGE, TF_COMMAND +visible, T_VISIBLE, TF_COMMAND option, T_OPTION, TF_COMMAND on, T_ON, TF_PARAM modules, T_OPT_MODULES, TF_OPTION diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 2abd3c7ff15..49fb4ab664c 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -36,7 +36,7 @@ static struct menu *current_menu, *current_entry; #define YYERROR_VERBOSE #endif %} -%expect 28 +%expect 30 %union { @@ -68,6 +68,7 @@ static struct menu *current_menu, *current_entry; %token T_DEFAULT %token T_SELECT %token T_RANGE +%token T_VISIBLE %token T_OPTION %token T_ON %token T_WORD @@ -123,7 +124,7 @@ stmt_list: ; option_name: - T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT + T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE ; common_stmt: @@ -359,7 +360,7 @@ menu: T_MENU prompt T_EOL printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); }; -menu_entry: menu depends_list +menu_entry: menu visibility_list depends_list { $$ = menu_add_menu(); }; @@ -430,6 +431,19 @@ depends: T_DEPENDS T_ON expr T_EOL printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); }; +/* visibility option */ + +visibility_list: + /* empty */ + | visibility_list visible + | visibility_list T_EOL +; + +visible: T_VISIBLE if_expr +{ + menu_add_visibility($2); +}; + /* prompt statement */ prompt_stmt_opt: @@ -526,6 +540,7 @@ static const char *zconf_tokenname(int token) case T_IF: return "if"; case T_ENDIF: return "endif"; case T_DEPENDS: return "depends"; + case T_VISIBLE: return "visible"; } return ""; } -- cgit v1.2.3-70-g09d2 From 09899c93b183870b122c94317f63344df43368e9 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Sat, 6 Nov 2010 18:30:24 -0300 Subject: kconfig: regen parser Signed-off-by: Arnaud Lacombe Signed-off-by: Mauro Carvalho Chehab --- scripts/kconfig/zconf.hash.c_shipped | 122 ++++---- scripts/kconfig/zconf.tab.c_shipped | 570 ++++++++++++++++++----------------- 2 files changed, 358 insertions(+), 334 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped index c1748faf463..4055d5de175 100644 --- a/scripts/kconfig/zconf.hash.c_shipped +++ b/scripts/kconfig/zconf.hash.c_shipped @@ -32,7 +32,7 @@ struct kconf_id; static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); -/* maximum key range = 47, duplicates = 0 */ +/* maximum key range = 50, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -46,32 +46,32 @@ kconf_id_hash (register const char *str, register unsigned int len) { static unsigned char asso_values[] = { - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 11, 5, - 0, 0, 5, 49, 5, 20, 49, 49, 5, 20, - 5, 0, 30, 49, 0, 15, 0, 10, 0, 49, - 25, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49, 49, 49, 49, 49, - 49, 49, 49, 49, 49, 49 + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 40, 5, + 0, 0, 5, 52, 0, 20, 52, 52, 10, 20, + 5, 0, 35, 52, 0, 30, 0, 15, 0, 52, + 15, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52 }; register int hval = len; @@ -102,25 +102,26 @@ struct kconf_id_strings_t char kconf_id_strings_str12[sizeof("default")]; char kconf_id_strings_str13[sizeof("def_bool")]; char kconf_id_strings_str14[sizeof("help")]; - char kconf_id_strings_str15[sizeof("bool")]; char kconf_id_strings_str16[sizeof("config")]; char kconf_id_strings_str17[sizeof("def_tristate")]; - char kconf_id_strings_str18[sizeof("boolean")]; + char kconf_id_strings_str18[sizeof("hex")]; char kconf_id_strings_str19[sizeof("defconfig_list")]; - char kconf_id_strings_str21[sizeof("string")]; char kconf_id_strings_str22[sizeof("if")]; char kconf_id_strings_str23[sizeof("int")]; - char kconf_id_strings_str26[sizeof("select")]; char kconf_id_strings_str27[sizeof("modules")]; char kconf_id_strings_str28[sizeof("tristate")]; char kconf_id_strings_str29[sizeof("menu")]; - char kconf_id_strings_str31[sizeof("source")]; char kconf_id_strings_str32[sizeof("comment")]; - char kconf_id_strings_str33[sizeof("hex")]; char kconf_id_strings_str35[sizeof("menuconfig")]; - char kconf_id_strings_str36[sizeof("prompt")]; - char kconf_id_strings_str37[sizeof("depends")]; + char kconf_id_strings_str36[sizeof("string")]; + char kconf_id_strings_str37[sizeof("visible")]; + char kconf_id_strings_str41[sizeof("prompt")]; + char kconf_id_strings_str42[sizeof("depends")]; + char kconf_id_strings_str44[sizeof("bool")]; + char kconf_id_strings_str46[sizeof("select")]; + char kconf_id_strings_str47[sizeof("boolean")]; char kconf_id_strings_str48[sizeof("mainmenu")]; + char kconf_id_strings_str51[sizeof("source")]; }; static struct kconf_id_strings_t kconf_id_strings_contents = { @@ -136,25 +137,26 @@ static struct kconf_id_strings_t kconf_id_strings_contents = "default", "def_bool", "help", - "bool", "config", "def_tristate", - "boolean", + "hex", "defconfig_list", - "string", "if", "int", - "select", "modules", "tristate", "menu", - "source", "comment", - "hex", "menuconfig", + "string", + "visible", "prompt", "depends", - "mainmenu" + "bool", + "select", + "boolean", + "mainmenu", + "source" }; #define kconf_id_strings ((const char *) &kconf_id_strings_contents) #ifdef __GNUC__ @@ -168,11 +170,11 @@ kconf_id_lookup (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 31, + TOTAL_KEYWORDS = 32, MIN_WORD_LENGTH = 2, MAX_WORD_LENGTH = 14, MIN_HASH_VALUE = 2, - MAX_HASH_VALUE = 48 + MAX_HASH_VALUE = 51 }; static struct kconf_id wordlist[] = @@ -191,31 +193,35 @@ kconf_id_lookup (register const char *str, register unsigned int len) {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_HEX}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION}, - {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT}, - {-1}, {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND}, + {-1}, {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND}, - {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX}, - {-1}, + {-1}, {-1}, {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND}, - {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_TYPE, TF_COMMAND, S_STRING}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_VISIBLE, TF_COMMAND}, + {-1}, {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_PROMPT, TF_COMMAND}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_DEPENDS, TF_COMMAND}, {-1}, - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND} + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_SELECT, TF_COMMAND}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}, + {-1}, {-1}, + {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_SOURCE, TF_COMMAND} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index 699d4b26518..4c5495ea205 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -160,18 +160,19 @@ static struct menu *current_menu, *current_entry; T_DEFAULT = 275, T_SELECT = 276, T_RANGE = 277, - T_OPTION = 278, - T_ON = 279, - T_WORD = 280, - T_WORD_QUOTE = 281, - T_UNEQUAL = 282, - T_CLOSE_PAREN = 283, - T_OPEN_PAREN = 284, - T_EOL = 285, - T_OR = 286, - T_AND = 287, - T_EQUAL = 288, - T_NOT = 289 + T_VISIBLE = 278, + T_OPTION = 279, + T_ON = 280, + T_WORD = 281, + T_WORD_QUOTE = 282, + T_UNEQUAL = 283, + T_CLOSE_PAREN = 284, + T_OPEN_PAREN = 285, + T_EOL = 286, + T_OR = 287, + T_AND = 288, + T_EQUAL = 289, + T_NOT = 290 }; #endif @@ -419,20 +420,20 @@ union yyalloc /* YYFINAL -- State number of the termination state. */ #define YYFINAL 11 /* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 277 +#define YYLAST 290 /* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 35 +#define YYNTOKENS 36 /* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 48 +#define YYNNTS 50 /* YYNRULES -- Number of rules. */ -#define YYNRULES 113 +#define YYNRULES 118 /* YYNRULES -- Number of states. */ -#define YYNSTATES 185 +#define YYNSTATES 191 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ #define YYUNDEFTOK 2 -#define YYMAXUTOK 289 +#define YYMAXUTOK 290 #define YYTRANSLATE(YYX) \ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) @@ -468,7 +469,8 @@ static const yytype_uint8 yytranslate[] = 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 + 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, + 35 }; #if YYDEBUG @@ -478,72 +480,73 @@ static const yytype_uint16 yyprhs[] = { 0, 0, 3, 6, 8, 11, 13, 14, 17, 20, 23, 26, 31, 36, 40, 42, 44, 46, 48, 50, - 52, 54, 56, 58, 60, 62, 64, 66, 70, 73, - 77, 80, 84, 87, 88, 91, 94, 97, 100, 103, - 106, 110, 115, 120, 125, 131, 135, 136, 140, 141, - 144, 148, 151, 153, 157, 158, 161, 164, 167, 170, - 173, 178, 182, 185, 190, 191, 194, 198, 200, 204, - 205, 208, 211, 214, 218, 222, 225, 227, 231, 232, - 235, 238, 241, 245, 249, 252, 255, 258, 259, 262, - 265, 268, 273, 274, 277, 279, 281, 284, 287, 290, - 292, 295, 296, 299, 301, 305, 309, 313, 316, 320, - 324, 326, 328, 329 + 52, 54, 56, 58, 60, 62, 64, 66, 68, 72, + 75, 79, 82, 86, 89, 90, 93, 96, 99, 102, + 105, 108, 112, 117, 122, 127, 133, 137, 138, 142, + 143, 146, 150, 153, 155, 159, 160, 163, 166, 169, + 172, 175, 180, 184, 187, 192, 193, 196, 200, 202, + 206, 207, 210, 213, 216, 220, 224, 228, 230, 234, + 235, 238, 241, 244, 248, 252, 255, 258, 261, 262, + 265, 268, 271, 276, 277, 280, 283, 286, 287, 290, + 292, 294, 297, 300, 303, 305, 308, 309, 312, 314, + 318, 322, 326, 329, 333, 337, 339, 341, 342 }; /* YYRHS -- A `-1'-separated list of the rules' RHS. */ static const yytype_int8 yyrhs[] = { - 36, 0, -1, 78, 37, -1, 37, -1, 62, 38, - -1, 38, -1, -1, 38, 40, -1, 38, 54, -1, - 38, 66, -1, 38, 77, -1, 38, 25, 1, 30, - -1, 38, 39, 1, 30, -1, 38, 1, 30, -1, + 37, 0, -1, 81, 38, -1, 38, -1, 63, 39, + -1, 39, -1, -1, 39, 41, -1, 39, 55, -1, + 39, 67, -1, 39, 80, -1, 39, 26, 1, 31, + -1, 39, 40, 1, 31, -1, 39, 1, 31, -1, 16, -1, 18, -1, 19, -1, 21, -1, 17, -1, - 22, -1, 20, -1, 30, -1, 60, -1, 70, -1, - 43, -1, 45, -1, 68, -1, 25, 1, 30, -1, - 1, 30, -1, 10, 25, 30, -1, 42, 46, -1, - 11, 25, 30, -1, 44, 46, -1, -1, 46, 47, - -1, 46, 48, -1, 46, 74, -1, 46, 72, -1, - 46, 41, -1, 46, 30, -1, 19, 75, 30, -1, - 18, 76, 79, 30, -1, 20, 80, 79, 30, -1, - 21, 25, 79, 30, -1, 22, 81, 81, 79, 30, - -1, 23, 49, 30, -1, -1, 49, 25, 50, -1, - -1, 33, 76, -1, 7, 82, 30, -1, 51, 55, - -1, 77, -1, 52, 57, 53, -1, -1, 55, 56, - -1, 55, 74, -1, 55, 72, -1, 55, 30, -1, - 55, 41, -1, 18, 76, 79, 30, -1, 19, 75, - 30, -1, 17, 30, -1, 20, 25, 79, 30, -1, - -1, 57, 40, -1, 14, 80, 78, -1, 77, -1, - 58, 61, 59, -1, -1, 61, 40, -1, 61, 66, - -1, 61, 54, -1, 3, 76, 78, -1, 4, 76, - 30, -1, 63, 73, -1, 77, -1, 64, 67, 65, - -1, -1, 67, 40, -1, 67, 66, -1, 67, 54, - -1, 6, 76, 30, -1, 9, 76, 30, -1, 69, - 73, -1, 12, 30, -1, 71, 13, -1, -1, 73, - 74, -1, 73, 30, -1, 73, 41, -1, 16, 24, - 80, 30, -1, -1, 76, 79, -1, 25, -1, 26, - -1, 5, 30, -1, 8, 30, -1, 15, 30, -1, - 30, -1, 78, 30, -1, -1, 14, 80, -1, 81, - -1, 81, 33, 81, -1, 81, 27, 81, -1, 29, - 80, 28, -1, 34, 80, -1, 80, 31, 80, -1, - 80, 32, 80, -1, 25, -1, 26, -1, -1, 25, - -1 + 22, -1, 20, -1, 23, -1, 31, -1, 61, -1, + 71, -1, 44, -1, 46, -1, 69, -1, 26, 1, + 31, -1, 1, 31, -1, 10, 26, 31, -1, 43, + 47, -1, 11, 26, 31, -1, 45, 47, -1, -1, + 47, 48, -1, 47, 49, -1, 47, 75, -1, 47, + 73, -1, 47, 42, -1, 47, 31, -1, 19, 78, + 31, -1, 18, 79, 82, 31, -1, 20, 83, 82, + 31, -1, 21, 26, 82, 31, -1, 22, 84, 84, + 82, 31, -1, 24, 50, 31, -1, -1, 50, 26, + 51, -1, -1, 34, 79, -1, 7, 85, 31, -1, + 52, 56, -1, 80, -1, 53, 58, 54, -1, -1, + 56, 57, -1, 56, 75, -1, 56, 73, -1, 56, + 31, -1, 56, 42, -1, 18, 79, 82, 31, -1, + 19, 78, 31, -1, 17, 31, -1, 20, 26, 82, + 31, -1, -1, 58, 41, -1, 14, 83, 81, -1, + 80, -1, 59, 62, 60, -1, -1, 62, 41, -1, + 62, 67, -1, 62, 55, -1, 3, 79, 81, -1, + 4, 79, 31, -1, 64, 76, 74, -1, 80, -1, + 65, 68, 66, -1, -1, 68, 41, -1, 68, 67, + -1, 68, 55, -1, 6, 79, 31, -1, 9, 79, + 31, -1, 70, 74, -1, 12, 31, -1, 72, 13, + -1, -1, 74, 75, -1, 74, 31, -1, 74, 42, + -1, 16, 25, 83, 31, -1, -1, 76, 77, -1, + 76, 31, -1, 23, 82, -1, -1, 79, 82, -1, + 26, -1, 27, -1, 5, 31, -1, 8, 31, -1, + 15, 31, -1, 31, -1, 81, 31, -1, -1, 14, + 83, -1, 84, -1, 84, 34, 84, -1, 84, 28, + 84, -1, 30, 83, 29, -1, 35, 83, -1, 83, + 32, 83, -1, 83, 33, 83, -1, 26, -1, 27, + -1, -1, 26, -1 }; /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 107, 107, 107, 109, 109, 111, 113, 114, 115, - 116, 117, 118, 122, 126, 126, 126, 126, 126, 126, - 126, 130, 131, 132, 133, 134, 135, 139, 140, 146, - 154, 160, 168, 178, 180, 181, 182, 183, 184, 185, - 188, 196, 202, 212, 218, 224, 227, 229, 240, 241, - 246, 255, 260, 268, 271, 273, 274, 275, 276, 277, - 280, 286, 297, 303, 313, 315, 320, 328, 336, 339, - 341, 342, 343, 348, 355, 362, 367, 375, 378, 380, - 381, 382, 385, 393, 400, 407, 413, 420, 422, 423, - 424, 427, 435, 437, 442, 443, 446, 447, 448, 452, - 453, 456, 457, 460, 461, 462, 463, 464, 465, 466, - 469, 470, 473, 474 + 0, 108, 108, 108, 110, 110, 112, 114, 115, 116, + 117, 118, 119, 123, 127, 127, 127, 127, 127, 127, + 127, 127, 131, 132, 133, 134, 135, 136, 140, 141, + 147, 155, 161, 169, 179, 181, 182, 183, 184, 185, + 186, 189, 197, 203, 213, 219, 225, 228, 230, 241, + 242, 247, 256, 261, 269, 272, 274, 275, 276, 277, + 278, 281, 287, 298, 304, 314, 316, 321, 329, 337, + 340, 342, 343, 344, 349, 356, 363, 368, 376, 379, + 381, 382, 383, 386, 394, 401, 408, 414, 421, 423, + 424, 425, 428, 436, 438, 439, 442, 449, 451, 456, + 457, 460, 461, 462, 466, 467, 470, 471, 474, 475, + 476, 477, 478, 479, 480, 483, 484, 487, 488 }; #endif @@ -556,7 +559,7 @@ static const char *const yytname[] = "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG", "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS", "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE", - "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", + "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL", "T_NOT", "$accept", "input", "start", "stmt_list", "option_name", "common_stmt", "option_error", "config_entry_start", "config_stmt", @@ -567,8 +570,8 @@ static const char *const yytname[] = "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu", "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt", "comment", "comment_stmt", "help_start", "help", "depends_list", - "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr", - "symbol", "word_opt", 0 + "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt", + "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0 }; #endif @@ -580,25 +583,25 @@ static const yytype_uint16 yytoknum[] = 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, - 285, 286, 287, 288, 289 + 285, 286, 287, 288, 289, 290 }; # endif /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ static const yytype_uint8 yyr1[] = { - 0, 35, 36, 36, 37, 37, 38, 38, 38, 38, - 38, 38, 38, 38, 39, 39, 39, 39, 39, 39, - 39, 40, 40, 40, 40, 40, 40, 41, 41, 42, - 43, 44, 45, 46, 46, 46, 46, 46, 46, 46, - 47, 47, 47, 47, 47, 48, 49, 49, 50, 50, - 51, 52, 53, 54, 55, 55, 55, 55, 55, 55, - 56, 56, 56, 56, 57, 57, 58, 59, 60, 61, - 61, 61, 61, 62, 63, 64, 65, 66, 67, 67, - 67, 67, 68, 69, 70, 71, 72, 73, 73, 73, - 73, 74, 75, 75, 76, 76, 77, 77, 77, 78, - 78, 79, 79, 80, 80, 80, 80, 80, 80, 80, - 81, 81, 82, 82 + 0, 36, 37, 37, 38, 38, 39, 39, 39, 39, + 39, 39, 39, 39, 40, 40, 40, 40, 40, 40, + 40, 40, 41, 41, 41, 41, 41, 41, 42, 42, + 43, 44, 45, 46, 47, 47, 47, 47, 47, 47, + 47, 48, 48, 48, 48, 48, 49, 50, 50, 51, + 51, 52, 53, 54, 55, 56, 56, 56, 56, 56, + 56, 57, 57, 57, 57, 58, 58, 59, 60, 61, + 62, 62, 62, 62, 63, 64, 65, 66, 67, 68, + 68, 68, 68, 69, 70, 71, 72, 73, 74, 74, + 74, 74, 75, 76, 76, 76, 77, 78, 78, 79, + 79, 80, 80, 80, 81, 81, 82, 82, 83, 83, + 83, 83, 83, 83, 83, 84, 84, 85, 85 }; /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ @@ -606,16 +609,16 @@ static const yytype_uint8 yyr2[] = { 0, 2, 2, 1, 2, 1, 0, 2, 2, 2, 2, 4, 4, 3, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 3, 2, 3, - 2, 3, 2, 0, 2, 2, 2, 2, 2, 2, - 3, 4, 4, 4, 5, 3, 0, 3, 0, 2, - 3, 2, 1, 3, 0, 2, 2, 2, 2, 2, - 4, 3, 2, 4, 0, 2, 3, 1, 3, 0, - 2, 2, 2, 3, 3, 2, 1, 3, 0, 2, - 2, 2, 3, 3, 2, 2, 2, 0, 2, 2, - 2, 4, 0, 2, 1, 1, 2, 2, 2, 1, - 2, 0, 2, 1, 3, 3, 3, 2, 3, 3, - 1, 1, 0, 1 + 1, 1, 1, 1, 1, 1, 1, 1, 3, 2, + 3, 2, 3, 2, 0, 2, 2, 2, 2, 2, + 2, 3, 4, 4, 4, 5, 3, 0, 3, 0, + 2, 3, 2, 1, 3, 0, 2, 2, 2, 2, + 2, 4, 3, 2, 4, 0, 2, 3, 1, 3, + 0, 2, 2, 2, 3, 3, 3, 1, 3, 0, + 2, 2, 2, 3, 3, 2, 2, 2, 0, 2, + 2, 2, 4, 0, 2, 2, 2, 0, 2, 1, + 1, 2, 2, 2, 1, 2, 0, 2, 1, 3, + 3, 3, 2, 3, 3, 1, 1, 0, 1 }; /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state @@ -623,165 +626,172 @@ static const yytype_uint8 yyr2[] = means the default is an error. */ static const yytype_uint8 yydefact[] = { - 6, 0, 99, 0, 3, 0, 6, 6, 94, 95, - 0, 1, 0, 0, 0, 0, 112, 0, 0, 0, + 6, 0, 104, 0, 3, 0, 6, 6, 99, 100, + 0, 1, 0, 0, 0, 0, 117, 0, 0, 0, 0, 0, 0, 14, 18, 15, 16, 20, 17, 19, - 0, 21, 0, 7, 33, 24, 33, 25, 54, 64, - 8, 69, 22, 87, 78, 9, 26, 87, 23, 10, - 0, 100, 2, 73, 13, 0, 96, 0, 113, 0, - 97, 0, 0, 0, 110, 111, 0, 0, 0, 103, - 98, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 74, 82, 50, 83, 29, 31, 0, 107, 0, - 0, 66, 0, 0, 11, 12, 0, 0, 0, 0, - 92, 0, 0, 0, 46, 0, 39, 38, 34, 35, - 0, 37, 36, 0, 0, 92, 0, 58, 59, 55, - 57, 56, 65, 53, 52, 70, 72, 68, 71, 67, - 89, 90, 88, 79, 81, 77, 80, 76, 106, 108, - 109, 105, 104, 28, 85, 0, 101, 0, 101, 101, - 101, 0, 0, 0, 86, 62, 101, 0, 101, 0, - 0, 0, 40, 93, 0, 0, 101, 48, 45, 27, - 0, 61, 0, 91, 102, 41, 42, 43, 0, 0, - 47, 60, 63, 44, 49 + 21, 0, 22, 0, 7, 34, 25, 34, 26, 55, + 65, 8, 70, 23, 93, 79, 9, 27, 88, 24, + 10, 0, 105, 2, 74, 13, 0, 101, 0, 118, + 0, 102, 0, 0, 0, 115, 116, 0, 0, 0, + 108, 103, 0, 0, 0, 0, 0, 0, 0, 88, + 0, 0, 75, 83, 51, 84, 30, 32, 0, 112, + 0, 0, 67, 0, 0, 11, 12, 0, 0, 0, + 0, 97, 0, 0, 0, 47, 0, 40, 39, 35, + 36, 0, 38, 37, 0, 0, 97, 0, 59, 60, + 56, 58, 57, 66, 54, 53, 71, 73, 69, 72, + 68, 106, 95, 0, 94, 80, 82, 78, 81, 77, + 90, 91, 89, 111, 113, 114, 110, 109, 29, 86, + 0, 106, 0, 106, 106, 106, 0, 0, 0, 87, + 63, 106, 0, 106, 0, 96, 0, 0, 41, 98, + 0, 0, 106, 49, 46, 28, 0, 62, 0, 107, + 92, 42, 43, 44, 0, 0, 48, 61, 64, 45, + 50 }; /* YYDEFGOTO[NTERM-NUM]. */ static const yytype_int16 yydefgoto[] = { - -1, 3, 4, 5, 32, 33, 107, 34, 35, 36, - 37, 73, 108, 109, 152, 180, 38, 39, 123, 40, - 75, 119, 76, 41, 127, 42, 77, 6, 43, 44, - 135, 45, 79, 46, 47, 48, 110, 111, 78, 112, - 147, 148, 49, 7, 161, 68, 69, 59 + -1, 3, 4, 5, 33, 34, 108, 35, 36, 37, + 38, 74, 109, 110, 157, 186, 39, 40, 124, 41, + 76, 120, 77, 42, 128, 43, 78, 6, 44, 45, + 137, 46, 80, 47, 48, 49, 111, 112, 81, 113, + 79, 134, 152, 153, 50, 7, 165, 69, 70, 60 }; /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing STATE-NUM. */ -#define YYPACT_NINF -89 +#define YYPACT_NINF -90 static const yytype_int16 yypact[] = { - 3, 4, -89, 20, -89, 100, -89, 7, -89, -89, - -8, -89, 17, 4, 28, 4, 37, 36, 4, 68, - 87, -18, 69, -89, -89, -89, -89, -89, -89, -89, - 128, -89, 138, -89, -89, -89, -89, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - 127, -89, -89, 110, -89, 126, -89, 136, -89, 137, - -89, 147, 150, 152, -89, -89, -18, -18, 171, -14, - -89, 153, 157, 34, 67, 180, 233, 220, 207, 220, - 154, -89, -89, -89, -89, -89, -89, 0, -89, -18, - -18, 110, 44, 44, -89, -89, 163, 174, 182, 4, - 4, -18, 194, 44, -89, 219, -89, -89, -89, -89, - 223, -89, -89, 203, 4, 4, 215, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - -89, -89, -89, -89, -89, -89, -89, -89, -89, 213, - -89, -89, -89, -89, -89, -18, 232, 227, 232, -5, - 232, 44, 35, 234, -89, -89, 232, 235, 232, 224, - -18, 236, -89, -89, 237, 238, 232, 216, -89, -89, - 240, -89, 241, -89, 71, -89, -89, -89, 242, 4, - -89, -89, -89, -89, -89 + 4, 42, -90, 96, -90, 111, -90, 15, -90, -90, + 75, -90, 82, 42, 104, 42, 110, 107, 42, 115, + 125, -4, 121, -90, -90, -90, -90, -90, -90, -90, + -90, 162, -90, 163, -90, -90, -90, -90, -90, -90, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, 139, -90, -90, 138, -90, 142, -90, 143, -90, + 152, -90, 164, 167, 168, -90, -90, -4, -4, 77, + -18, -90, 177, 185, 33, 71, 195, 247, 236, -2, + 236, 171, -90, -90, -90, -90, -90, -90, 41, -90, + -4, -4, 138, 97, 97, -90, -90, 186, 187, 194, + 42, 42, -4, 196, 97, -90, 219, -90, -90, -90, + -90, 210, -90, -90, 204, 42, 42, 199, -90, -90, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, 222, -90, 223, -90, -90, -90, -90, -90, -90, + -90, -90, -90, -90, 215, -90, -90, -90, -90, -90, + -4, 222, 228, 222, -5, 222, 97, 35, 229, -90, + -90, 222, 232, 222, -4, -90, 135, 233, -90, -90, + 234, 235, 222, 240, -90, -90, 237, -90, 239, -13, + -90, -90, -90, -90, 244, 42, -90, -90, -90, -90, + -90 }; /* YYPGOTO[NTERM-NUM]. */ static const yytype_int16 yypgoto[] = { - -89, -89, 255, 267, -89, 47, -57, -89, -89, -89, - -89, 239, -89, -89, -89, -89, -89, -89, -89, 130, - -89, -89, -89, -89, -89, -89, -89, -89, -89, -89, - -89, 181, -89, -89, -89, -89, -89, 199, 229, 16, - 162, -1, 74, -7, 103, -65, -88, -89 + -90, -90, 269, 271, -90, 23, -70, -90, -90, -90, + -90, 243, -90, -90, -90, -90, -90, -90, -90, -48, + -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, + -90, -20, -90, -90, -90, -90, -90, 206, 205, -68, + -90, -90, 169, -1, 27, -7, 118, -66, -89, -90 }; /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If positive, shift that token. If negative, reduce the rule which number is the opposite. If zero, do what YYDEFACT says. If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -85 +#define YYTABLE_NINF -86 static const yytype_int16 yytable[] = { - 10, 87, 88, 53, 141, 142, 1, 64, 65, 160, - 1, 66, 55, 92, 57, 151, 67, 61, 118, 93, - 11, 131, 2, 131, 139, 140, 89, 90, 138, 8, - 9, 89, 90, 2, -30, 96, 149, 51, -30, -30, - -30, -30, -30, -30, -30, -30, 97, 54, -30, -30, - 98, -30, 99, 100, 101, 102, 103, 104, 56, 105, - 167, 91, 58, 166, 106, 168, 60, -32, 96, 64, - 65, -32, -32, -32, -32, -32, -32, -32, -32, 97, - 159, -32, -32, 98, -32, 99, 100, 101, 102, 103, - 104, 121, 105, 62, 132, 174, 132, 106, 146, 70, - -5, 12, 89, 90, 13, 14, 15, 16, 17, 18, - 19, 20, 63, 156, 21, 22, 23, 24, 25, 26, - 27, 28, 29, 122, 125, 30, 133, -4, 12, 71, - 31, 13, 14, 15, 16, 17, 18, 19, 20, 72, - 51, 21, 22, 23, 24, 25, 26, 27, 28, 29, - 124, 129, 30, 137, -84, 96, 81, 31, -84, -84, - -84, -84, -84, -84, -84, -84, 82, 83, -84, -84, - 98, -84, -84, -84, -84, -84, -84, 84, 184, 105, - 85, 96, 86, 94, 130, -51, -51, 95, -51, -51, - -51, -51, 97, 143, -51, -51, 98, 113, 114, 115, - 116, 2, 89, 90, 144, 105, 145, 126, 96, 134, - 117, -75, -75, -75, -75, -75, -75, -75, -75, 150, - 153, -75, -75, 98, 13, 14, 15, 16, 17, 18, - 19, 20, 105, 155, 21, 22, 154, 130, 14, 15, - 158, 17, 18, 19, 20, 90, 160, 21, 22, 179, - 31, 163, 164, 165, 173, 89, 90, 162, 128, 170, - 136, 172, 52, 31, 169, 171, 175, 176, 177, 178, - 181, 182, 183, 50, 120, 74, 80, 157 + 10, 88, 89, 54, 146, 147, 119, 1, 122, 164, + 93, 141, 56, 142, 58, 156, 94, 62, 1, 90, + 91, 131, 65, 66, 144, 145, 67, 90, 91, 132, + 127, 68, 136, -31, 97, 2, 154, -31, -31, -31, + -31, -31, -31, -31, -31, 98, 52, -31, -31, 99, + -31, 100, 101, 102, 103, 104, -31, 105, 129, 106, + 138, 173, 92, 141, 107, 142, 174, 172, 8, 9, + 143, -33, 97, 90, 91, -33, -33, -33, -33, -33, + -33, -33, -33, 98, 166, -33, -33, 99, -33, 100, + 101, 102, 103, 104, -33, 105, 11, 106, 179, 151, + 123, 126, 107, 135, 125, 130, 2, 139, 2, 90, + 91, -5, 12, 55, 161, 13, 14, 15, 16, 17, + 18, 19, 20, 65, 66, 21, 22, 23, 24, 25, + 26, 27, 28, 29, 30, 57, 59, 31, 61, -4, + 12, 63, 32, 13, 14, 15, 16, 17, 18, 19, + 20, 64, 71, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 72, 73, 31, 180, 90, 91, 52, + 32, -85, 97, 82, 83, -85, -85, -85, -85, -85, + -85, -85, -85, 84, 190, -85, -85, 99, -85, -85, + -85, -85, -85, -85, -85, 85, 97, 106, 86, 87, + -52, -52, 140, -52, -52, -52, -52, 98, 95, -52, + -52, 99, 114, 115, 116, 117, 96, 148, 149, 150, + 158, 106, 155, 159, 97, 163, 118, -76, -76, -76, + -76, -76, -76, -76, -76, 160, 164, -76, -76, 99, + 13, 14, 15, 16, 17, 18, 19, 20, 91, 106, + 21, 22, 14, 15, 140, 17, 18, 19, 20, 168, + 175, 21, 22, 177, 181, 182, 183, 32, 187, 167, + 188, 169, 170, 171, 185, 189, 53, 51, 32, 176, + 75, 178, 121, 0, 133, 162, 0, 0, 0, 0, + 184 }; -static const yytype_uint8 yycheck[] = +static const yytype_int16 yycheck[] = { - 1, 66, 67, 10, 92, 93, 3, 25, 26, 14, - 3, 29, 13, 27, 15, 103, 34, 18, 75, 33, - 0, 78, 30, 80, 89, 90, 31, 32, 28, 25, - 26, 31, 32, 30, 0, 1, 101, 30, 4, 5, - 6, 7, 8, 9, 10, 11, 12, 30, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, 30, 25, - 25, 68, 25, 151, 30, 30, 30, 0, 1, 25, - 26, 4, 5, 6, 7, 8, 9, 10, 11, 12, - 145, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 23, 75, 25, 25, 78, 160, 80, 30, 99, 30, - 0, 1, 31, 32, 4, 5, 6, 7, 8, 9, - 10, 11, 25, 114, 14, 15, 16, 17, 18, 19, - 20, 21, 22, 76, 77, 25, 79, 0, 1, 1, - 30, 4, 5, 6, 7, 8, 9, 10, 11, 1, - 30, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 76, 77, 25, 79, 0, 1, 30, 30, 4, 5, - 6, 7, 8, 9, 10, 11, 30, 30, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 30, 179, 25, - 30, 1, 30, 30, 30, 5, 6, 30, 8, 9, - 10, 11, 12, 30, 14, 15, 16, 17, 18, 19, - 20, 30, 31, 32, 30, 25, 24, 77, 1, 79, - 30, 4, 5, 6, 7, 8, 9, 10, 11, 25, - 1, 14, 15, 16, 4, 5, 6, 7, 8, 9, - 10, 11, 25, 30, 14, 15, 13, 30, 5, 6, - 25, 8, 9, 10, 11, 32, 14, 14, 15, 33, - 30, 148, 149, 150, 30, 31, 32, 30, 77, 156, - 79, 158, 7, 30, 30, 30, 30, 30, 30, 166, - 30, 30, 30, 6, 75, 36, 47, 115 + 1, 67, 68, 10, 93, 94, 76, 3, 76, 14, + 28, 81, 13, 81, 15, 104, 34, 18, 3, 32, + 33, 23, 26, 27, 90, 91, 30, 32, 33, 31, + 78, 35, 80, 0, 1, 31, 102, 4, 5, 6, + 7, 8, 9, 10, 11, 12, 31, 14, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 24, 78, 26, + 80, 26, 69, 133, 31, 133, 31, 156, 26, 27, + 29, 0, 1, 32, 33, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 150, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 24, 0, 26, 164, 100, + 77, 78, 31, 80, 77, 78, 31, 80, 31, 32, + 33, 0, 1, 31, 115, 4, 5, 6, 7, 8, + 9, 10, 11, 26, 27, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 31, 26, 26, 31, 0, + 1, 26, 31, 4, 5, 6, 7, 8, 9, 10, + 11, 26, 31, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 1, 1, 26, 31, 32, 33, 31, + 31, 0, 1, 31, 31, 4, 5, 6, 7, 8, + 9, 10, 11, 31, 185, 14, 15, 16, 17, 18, + 19, 20, 21, 22, 23, 31, 1, 26, 31, 31, + 5, 6, 31, 8, 9, 10, 11, 12, 31, 14, + 15, 16, 17, 18, 19, 20, 31, 31, 31, 25, + 1, 26, 26, 13, 1, 26, 31, 4, 5, 6, + 7, 8, 9, 10, 11, 31, 14, 14, 15, 16, + 4, 5, 6, 7, 8, 9, 10, 11, 33, 26, + 14, 15, 5, 6, 31, 8, 9, 10, 11, 31, + 31, 14, 15, 31, 31, 31, 31, 31, 31, 151, + 31, 153, 154, 155, 34, 31, 7, 6, 31, 161, + 37, 163, 76, -1, 79, 116, -1, -1, -1, -1, + 172 }; /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing symbol of state STATE-NUM. */ static const yytype_uint8 yystos[] = { - 0, 3, 30, 36, 37, 38, 62, 78, 25, 26, - 76, 0, 1, 4, 5, 6, 7, 8, 9, 10, + 0, 3, 31, 37, 38, 39, 63, 81, 26, 27, + 79, 0, 1, 4, 5, 6, 7, 8, 9, 10, 11, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 25, 30, 39, 40, 42, 43, 44, 45, 51, 52, - 54, 58, 60, 63, 64, 66, 68, 69, 70, 77, - 38, 30, 37, 78, 30, 76, 30, 76, 25, 82, - 30, 76, 25, 25, 25, 26, 29, 34, 80, 81, - 30, 1, 1, 46, 46, 55, 57, 61, 73, 67, - 73, 30, 30, 30, 30, 30, 30, 80, 80, 31, - 32, 78, 27, 33, 30, 30, 1, 12, 16, 18, - 19, 20, 21, 22, 23, 25, 30, 41, 47, 48, - 71, 72, 74, 17, 18, 19, 20, 30, 41, 56, - 72, 74, 40, 53, 77, 40, 54, 59, 66, 77, - 30, 41, 74, 40, 54, 65, 66, 77, 28, 80, - 80, 81, 81, 30, 30, 24, 76, 75, 76, 80, - 25, 81, 49, 1, 13, 30, 76, 75, 25, 80, - 14, 79, 30, 79, 79, 79, 81, 25, 30, 30, - 79, 30, 79, 30, 80, 30, 30, 30, 79, 33, - 50, 30, 30, 30, 76 + 23, 26, 31, 40, 41, 43, 44, 45, 46, 52, + 53, 55, 59, 61, 64, 65, 67, 69, 70, 71, + 80, 39, 31, 38, 81, 31, 79, 31, 79, 26, + 85, 31, 79, 26, 26, 26, 27, 30, 35, 83, + 84, 31, 1, 1, 47, 47, 56, 58, 62, 76, + 68, 74, 31, 31, 31, 31, 31, 31, 83, 83, + 32, 33, 81, 28, 34, 31, 31, 1, 12, 16, + 18, 19, 20, 21, 22, 24, 26, 31, 42, 48, + 49, 72, 73, 75, 17, 18, 19, 20, 31, 42, + 57, 73, 75, 41, 54, 80, 41, 55, 60, 67, + 80, 23, 31, 74, 77, 41, 55, 66, 67, 80, + 31, 42, 75, 29, 83, 83, 84, 84, 31, 31, + 25, 79, 78, 79, 83, 26, 84, 50, 1, 13, + 31, 79, 78, 26, 14, 82, 83, 82, 31, 82, + 82, 82, 84, 26, 31, 31, 82, 31, 82, 83, + 31, 31, 31, 31, 82, 34, 51, 31, 31, 31, + 79 }; #define yyerrok (yyerrstatus = 0) @@ -1292,7 +1302,7 @@ yydestruct (yymsg, yytype, yyvaluep) switch (yytype) { - case 52: /* "choice_entry" */ + case 53: /* "choice_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1302,7 +1312,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 58: /* "if_entry" */ + case 59: /* "if_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1312,7 +1322,7 @@ yydestruct (yymsg, yytype, yyvaluep) }; break; - case 64: /* "menu_entry" */ + case 65: /* "menu_entry" */ { fprintf(stderr, "%s:%d: missing end statement for this entry\n", @@ -1644,17 +1654,17 @@ yyreduce: { zconf_error("invalid statement"); ;} break; - case 27: + case 28: { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;} break; - case 28: + case 29: { zconf_error("invalid option"); ;} break; - case 29: + case 30: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1664,7 +1674,7 @@ yyreduce: ;} break; - case 30: + case 31: { menu_end_entry(); @@ -1672,7 +1682,7 @@ yyreduce: ;} break; - case 31: + case 32: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); @@ -1682,7 +1692,7 @@ yyreduce: ;} break; - case 32: + case 33: { if (current_entry->prompt) @@ -1694,7 +1704,7 @@ yyreduce: ;} break; - case 40: + case 41: { menu_set_type((yyvsp[(1) - (3)].id)->stype); @@ -1704,7 +1714,7 @@ yyreduce: ;} break; - case 41: + case 42: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1712,7 +1722,7 @@ yyreduce: ;} break; - case 42: + case 43: { menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr)); @@ -1724,7 +1734,7 @@ yyreduce: ;} break; - case 43: + case 44: { menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr)); @@ -1732,7 +1742,7 @@ yyreduce: ;} break; - case 44: + case 45: { menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr)); @@ -1740,7 +1750,7 @@ yyreduce: ;} break; - case 47: + case 48: { struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string))); @@ -1752,17 +1762,17 @@ yyreduce: ;} break; - case 48: + case 49: { (yyval.string) = NULL; ;} break; - case 49: + case 50: { (yyval.string) = (yyvsp[(2) - (2)].string); ;} break; - case 50: + case 51: { struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE); @@ -1773,14 +1783,14 @@ yyreduce: ;} break; - case 51: + case 52: { (yyval.menu) = menu_add_menu(); ;} break; - case 52: + case 53: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) { @@ -1790,7 +1800,7 @@ yyreduce: ;} break; - case 60: + case 61: { menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); @@ -1798,7 +1808,7 @@ yyreduce: ;} break; - case 61: + case 62: { if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) { @@ -1811,7 +1821,7 @@ yyreduce: ;} break; - case 62: + case 63: { current_entry->sym->flags |= SYMBOL_OPTIONAL; @@ -1819,7 +1829,7 @@ yyreduce: ;} break; - case 63: + case 64: { if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) { @@ -1831,7 +1841,7 @@ yyreduce: ;} break; - case 66: + case 67: { printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); @@ -1841,7 +1851,7 @@ yyreduce: ;} break; - case 67: + case 68: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) { @@ -1851,14 +1861,14 @@ yyreduce: ;} break; - case 73: + case 74: { menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL); ;} break; - case 74: + case 75: { menu_add_entry(NULL); @@ -1867,14 +1877,14 @@ yyreduce: ;} break; - case 75: + case 76: { (yyval.menu) = menu_add_menu(); ;} break; - case 76: + case 77: { if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) { @@ -1884,7 +1894,7 @@ yyreduce: ;} break; - case 82: + case 83: { printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); @@ -1892,7 +1902,7 @@ yyreduce: ;} break; - case 83: + case 84: { menu_add_entry(NULL); @@ -1901,14 +1911,14 @@ yyreduce: ;} break; - case 84: + case 85: { menu_end_entry(); ;} break; - case 85: + case 86: { printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); @@ -1916,14 +1926,14 @@ yyreduce: ;} break; - case 86: + case 87: { current_entry->help = (yyvsp[(2) - (2)].string); ;} break; - case 91: + case 92: { menu_add_dep((yyvsp[(3) - (4)].expr)); @@ -1931,84 +1941,91 @@ yyreduce: ;} break; - case 93: + case 96: + + { + menu_add_visibility((yyvsp[(2) - (2)].expr)); +;} + break; + + case 98: { menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr)); ;} break; - case 96: + case 101: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 97: + case 102: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 98: + case 103: { (yyval.id) = (yyvsp[(1) - (2)].id); ;} break; - case 101: + case 106: { (yyval.expr) = NULL; ;} break; - case 102: + case 107: { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;} break; - case 103: + case 108: { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;} break; - case 104: + case 109: { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 105: + case 110: { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;} break; - case 106: + case 111: { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;} break; - case 107: + case 112: { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;} break; - case 108: + case 113: { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 109: + case 114: { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;} break; - case 110: + case 115: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;} break; - case 111: + case 116: { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;} break; - case 112: + case 117: { (yyval.string) = NULL; ;} break; @@ -2278,6 +2295,7 @@ static const char *zconf_tokenname(int token) case T_IF: return "if"; case T_ENDIF: return "endif"; case T_DEPENDS: return "depends"; + case T_VISIBLE: return "visible"; } return ""; } -- cgit v1.2.3-70-g09d2 From 27af038494ef2f3f3a23aa040bfc1ea29d99d76d Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 24 Nov 2010 12:57:17 -0800 Subject: scripts: fix gfp-translate for recent changes to gfp.h The recent changes to gfp.h to satisfy sparse broke scripts/gfp-translate. This patch fixes it up to work with old and new versions of gfp.h . [akpm@linux-foundation.org: use `grep -q', per WANG Cong] Signed-off-by: Mel Gorman Cc: Namhyung Kim Reviewed-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/gfp-translate | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/gfp-translate b/scripts/gfp-translate index d81b968d864..c9230e158a8 100644 --- a/scripts/gfp-translate +++ b/scripts/gfp-translate @@ -63,7 +63,12 @@ fi # Extract GFP flags from the kernel source TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1 -grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE +grep -q ___GFP $SOURCE/include/linux/gfp.h +if [ $? -eq 0 ]; then + grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE +else + grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE +fi # Parse the flags IFS=" -- cgit v1.2.3-70-g09d2 From 15664125f7cadcb6d725cb2d9b90f9715397848d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 24 Nov 2010 10:43:55 +0100 Subject: scripts/tags.sh: Add magic for trace-events Make tags find the trace-event definitions Acked-by: WANG Cong Signed-off-by: Peter Zijlstra LKML-Reference: <1290591835.2072.438.camel@laptop> Signed-off-by: Steven Rostedt --- scripts/tags.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/tags.sh b/scripts/tags.sh index 8509bb51293..bbbe584d449 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -125,7 +125,9 @@ exuberant() -I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \ --extra=+f --c-kinds=-px \ --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \ - --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' + --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \ + --regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \ + --regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/' all_kconfigs | xargs $1 -a \ --langdef=kconfig --language-force=kconfig \ -- cgit v1.2.3-70-g09d2 From e63233f75a1a6bfa97ffb52a20cc6801a4c63fb2 Mon Sep 17 00:00:00 2001 From: John Reiser Date: Mon, 22 Nov 2010 19:41:44 -0800 Subject: ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO It looks to me like the change which introduced "virtual functions" forgot about cross-platform endianness. Thank you to Arnaud for supplying before+after data files do_mounts*.o. This fixes a MIPS build failure triggered by recordmcount. Reported-by: Arnaud Lacombe Tested-by: Arnaud Lacombe Acked-by: Wu Zhangjin Acked-by: Ralf Baechle Signed-off-by: John Reiser Signed-off-by: Steven Rostedt --- scripts/recordmcount.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h index 58e933a2054..39667174971 100644 --- a/scripts/recordmcount.h +++ b/scripts/recordmcount.h @@ -119,7 +119,7 @@ static uint_t (*Elf_r_sym)(Elf_Rel const *rp) = fn_ELF_R_SYM; static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type) { - rp->r_info = ELF_R_INFO(sym, type); + rp->r_info = _w(ELF_R_INFO(sym, type)); } static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO; -- cgit v1.2.3-70-g09d2