From 7834704be4777fc0ed67c4486ef8c5691078d135 Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Wed, 14 Apr 2010 22:03:02 -0700 Subject: cfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body In a scenario, where a cfg80211 driver (station mode) does not send assoc request and assoc response IEs in cfg80211_connect_result after a successful association to an AP, cfg80211 sends IWEVASSOCREQIE and IWEVASSOCRESPIE to the user space application with NULL data. This can cause an issue at the event recipient. An example of this is when cfg80211 sends IWEVASSOCREQIE and IWEVASSOCRESPIE events with NULL event body to wpa_supplicant. The wpa_supplicant overwrites the assoc request and assoc response IEs for this station with NULL data. If the association is WPA/WPA2, the wpa_supplicant is not able to generate EAPOL handshake messages, since the IEs are NULL. With the patch, req_ie and resp_ie will be NULL by avoiding the assignment if the driver has not sent the IEs to cfg80211. The event sending code sends the events only if resp_ie and req_ie are not NULL. This will ensure that the events are not sent with NULL event body. Signed-off-by: Nishant Sarmukadam Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/sme.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'net') diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 17465777eb4..dcd7685242f 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -517,12 +517,16 @@ void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, ev->type = EVENT_CONNECT_RESULT; if (bssid) memcpy(ev->cr.bssid, bssid, ETH_ALEN); - ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev); - ev->cr.req_ie_len = req_ie_len; - memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len); - ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; - ev->cr.resp_ie_len = resp_ie_len; - memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len); + if (req_ie_len) { + ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev); + ev->cr.req_ie_len = req_ie_len; + memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len); + } + if (resp_ie_len) { + ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len; + ev->cr.resp_ie_len = resp_ie_len; + memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len); + } ev->cr.status = status; spin_lock_irqsave(&wdev->event_lock, flags); -- cgit v1.2.3-18-g5258 From 2aab4c273ad837fbcf2955aee32b9ec4706c2521 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 Apr 2010 11:00:24 +0200 Subject: mac80211: fix stopping RX BA session from timer Kalle reported that his system deadlocks since my recent work in this area. The reason quickly became apparent: we try to cancel_timer_sync() a timer from within itself. Fix that by making the function aware of the context it is called from. Reported-by: Kalle Valo Signed-off-by: Johannes Berg Tested-by: Kalle Valo Signed-off-by: John W. Linville --- net/mac80211/agg-rx.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'net') diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index 53233ab50f6..1771dd9bd13 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -18,8 +18,9 @@ #include "ieee80211_i.h" #include "driver-ops.h" -void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, - u16 initiator, u16 reason) +static void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, + u16 initiator, u16 reason, + bool from_timer) { struct ieee80211_local *local = sta->local; struct tid_ampdu_rx *tid_rx; @@ -69,10 +70,17 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, spin_unlock_bh(&sta->lock); - del_timer_sync(&tid_rx->session_timer); + if (!from_timer) + del_timer_sync(&tid_rx->session_timer); kfree(tid_rx); } +void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, + u16 initiator, u16 reason) +{ + ___ieee80211_stop_rx_ba_session(sta, tid, initiator, reason, false); +} + /* * After accepting the AddBA Request we activated a timer, * resetting it after each frame that arrives from the originator. @@ -91,8 +99,8 @@ static void sta_rx_agg_session_timer_expired(unsigned long data) #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid); #endif - __ieee80211_stop_rx_ba_session(sta, *ptid, WLAN_BACK_RECIPIENT, - WLAN_REASON_QSTA_TIMEOUT); + ___ieee80211_stop_rx_ba_session(sta, *ptid, WLAN_BACK_RECIPIENT, + WLAN_REASON_QSTA_TIMEOUT, true); } static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid, -- cgit v1.2.3-18-g5258 From 3393a608c4979a94d1887efc05b792849d361a65 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Mon, 19 Apr 2010 10:12:52 +0300 Subject: mac80211: Prevent running sta_cleanup timer unnecessarily MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sta_cleanup timer is used to periodically expire buffered frames from the tx buf. The timer is executing periodically, regardless of the need for it. This is wasting resources. Fix this simply by not restarting the sta_cleanup timer if the tx buffer was empty. Restart the timer when there is some more tx-traffic. Cc: Janne Ylälehto Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- net/mac80211/sta_info.c | 13 ++++++++++--- net/mac80211/tx.c | 7 +++++++ 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'net') diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ff0eb948917..3de7a2260d6 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -575,7 +575,7 @@ static int sta_info_buffer_expired(struct sta_info *sta, } -static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local, +static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, struct sta_info *sta) { unsigned long flags; @@ -583,7 +583,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata; if (skb_queue_empty(&sta->ps_tx_buf)) - return; + return false; for (;;) { spin_lock_irqsave(&sta->ps_tx_buf.lock, flags); @@ -608,6 +608,8 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local, if (skb_queue_empty(&sta->ps_tx_buf)) sta_info_clear_tim_bit(sta); } + + return true; } static int __must_check __sta_info_destroy(struct sta_info *sta) @@ -755,15 +757,20 @@ static void sta_info_cleanup(unsigned long data) { struct ieee80211_local *local = (struct ieee80211_local *) data; struct sta_info *sta; + bool timer_needed = false; rcu_read_lock(); list_for_each_entry_rcu(sta, &local->sta_list, list) - sta_info_cleanup_expire_buffered(local, sta); + if (sta_info_cleanup_expire_buffered(local, sta)) + timer_needed = true; rcu_read_unlock(); if (local->quiescing) return; + if (!timer_needed) + return; + local->sta_cleanup.expires = round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL); add_timer(&local->sta_cleanup); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2cb77267f73..e2aa972d584 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -429,6 +429,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) struct sta_info *sta = tx->sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; + struct ieee80211_local *local = tx->local; u32 staflags; if (unlikely(!sta || @@ -476,6 +477,12 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) info->control.vif = &tx->sdata->vif; info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; skb_queue_tail(&sta->ps_tx_buf, tx->skb); + + if (!timer_pending(&local->sta_cleanup)) + mod_timer(&local->sta_cleanup, + round_jiffies(jiffies + + STA_INFO_CLEANUP_INTERVAL)); + return TX_QUEUED; } #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG -- cgit v1.2.3-18-g5258 From 67e0f392779e35a96c43bc240ef5d30a701d153e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 Apr 2010 11:03:13 +0200 Subject: mac80211: add missing newline One HT debugging printk is missing a newline, add it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 6bb4d0a1e5c..7dfe833d971 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -186,7 +186,7 @@ static void sta_addba_resp_timer_expired(unsigned long data) *state = HT_AGG_STATE_IDLE; #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "timer expired on tid %d but we are not " - "(or no longer) expecting addBA response there", + "(or no longer) expecting addBA response there\n", tid); #endif return; -- cgit v1.2.3-18-g5258 From 03ceedea972a82d343fa5c2528b3952fa9e615d5 Mon Sep 17 00:00:00 2001 From: Daniel Yingqiang Ma Date: Tue, 13 Apr 2010 15:12:07 +0800 Subject: ath9k: Group Key fix for VAPs When I set up multiple VAPs with ath9k, I encountered an issue that the traffic may be lost after a while. The detailed phenomenon is 1. After a while the clients connected to one of these VAPs will get into a state that no broadcast/multicast packets can be transfered successfully while the unicast packets can be transfered normally. 2. Minutes latter the unitcast packets transfer will fail as well, because the ARP entry is expired and it can't be freshed due to the broadcast trouble. It's caused by the group key overwritten and someone discussed this issue in ath9k-devel maillist before, but haven't work out a fix yet. I referred the method in madwifi, and made a patch for ath9k. The method is to set the high bit of the sender(AP)'s address, and associated that mac and the group key. It requires the hardware supports multicast frame key search. It seems true for AR9160. Not sure whether it's the correct way to fix this issue. But it seems to work in my test. The patch is attached, feel free to revise it. Signed-off-by: Daniel Yingqiang ma Signed-off-by: John W. Linville --- net/mac80211/key.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net') diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 8160d9c5372..75705bd4195 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -139,6 +139,7 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key) struct ieee80211_sub_if_data, u.ap); + key->conf.ap_addr = sdata->dev->dev_addr; ret = drv_set_key(key->local, SET_KEY, sdata, sta, &key->conf); if (!ret) { -- cgit v1.2.3-18-g5258 From 1289723ef238908ca8d95ff48a46ee0de970f882 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Mon, 19 Apr 2010 10:23:57 +0200 Subject: mac80211: sample survey implementation for mac80211 & hwsim This adds the survey function to both mac80211 itself and to mac80211_hwsim. For the latter driver, we simply invent some noise level.A real driver which cannot determine the real channel noise MUST NOT report any noise, especially not a magically conjured one :-) Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 12 ++++++++++++ net/mac80211/driver-ops.h | 9 +++++++++ 2 files changed, 21 insertions(+) (limited to 'net') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 4edd73cbf05..f97dda735cb 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -410,6 +410,17 @@ static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, return ret; } +static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, + int idx, struct survey_info *survey) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + + if (!local->ops->get_survey) + return -EOPNOTSUPP; + + return drv_get_survey(local, idx, survey); +} + static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_info *sinfo) { @@ -1507,6 +1518,7 @@ struct cfg80211_ops mac80211_config_ops = { .change_station = ieee80211_change_station, .get_station = ieee80211_get_station, .dump_station = ieee80211_dump_station, + .dump_survey = ieee80211_dump_survey, #ifdef CONFIG_MAC80211_MESH .add_mpath = ieee80211_add_mpath, .del_mpath = ieee80211_del_mpath, diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index c3d844093a2..d1f8a7c2225 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -346,6 +346,15 @@ static inline int drv_ampdu_action(struct ieee80211_local *local, return ret; } +static inline int drv_get_survey(struct ieee80211_local *local, int idx, + struct survey_info *survey) +{ + int ret = -EOPNOTSUPP; + if (local->ops->conf_tx) + ret = local->ops->get_survey(&local->hw, idx, survey); + /* trace_drv_get_survey(local, idx, survey, ret); */ + return ret; +} static inline void drv_rfkill_poll(struct ieee80211_local *local) { -- cgit v1.2.3-18-g5258 From 7bdfcaaff5de368a88a4f784f7283b66c17d051d Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 20 Apr 2010 13:15:56 +0300 Subject: mac80211: Fix ieee80211_sta_conn_mon_timer with hw connection monitoring When IEEE80211_HW_CONNECTION_MONITOR is configured by the driver, starting of ieee80211_sta_conn_mon_timer should be prevented, as it is then not needed. This is currently partially the case. As it seems, when a probe-response is received from the AP the timer is still restarted, thus restarting the host based connection keep-alive mechanism. These probe-responses happen at least when scanning while associated. Fix this by preventing starting of the ieee80211_sta_conn_mon_timer in the ieee80211_rx_mgmt_probe_resp function. Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d11a54c289a..d811e3fa1d7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1330,12 +1330,17 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, mutex_lock(&sdata->local->iflist_mtx); ieee80211_recalc_ps(sdata->local, -1); mutex_unlock(&sdata->local->iflist_mtx); + + if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) + return; + /* * We've received a probe response, but are not sure whether * we have or will be receiving any beacons or data, so let's * schedule the timers again, just in case. */ mod_beacon_timer(sdata); + mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); -- cgit v1.2.3-18-g5258