From 2103dec14792be2c2194a454630b01120d30e5cb Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 8 Jul 2013 16:55:53 +0200 Subject: mac80211: select and adjust bitrates according to channel mode The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 45 ++++++++++++++++++--------------------------- 1 file changed, 18 insertions(+), 27 deletions(-) (limited to 'net/mac80211/cfg.c') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8184d121ff0..b82fff6c0b3 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -395,9 +395,13 @@ void sta_set_rate_info_tx(struct sta_info *sta, rinfo->nss = ieee80211_rate_get_vht_nss(rate); } else { struct ieee80211_supported_band *sband; + int shift = ieee80211_vif_get_shift(&sta->sdata->vif); + u16 brate; + sband = sta->local->hw.wiphy->bands[ ieee80211_get_sdata_band(sta->sdata)]; - rinfo->legacy = sband->bitrates[rate->idx].bitrate; + brate = sband->bitrates[rate->idx].bitrate; + rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); } if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; @@ -422,11 +426,13 @@ void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) rinfo->mcs = sta->last_rx_rate_idx; } else { struct ieee80211_supported_band *sband; + int shift = ieee80211_vif_get_shift(&sta->sdata->vif); + u16 brate; sband = sta->local->hw.wiphy->bands[ ieee80211_get_sdata_band(sta->sdata)]; - rinfo->legacy = - sband->bitrates[sta->last_rx_rate_idx].bitrate; + brate = sband->bitrates[sta->last_rx_rate_idx].bitrate; + rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); } if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) @@ -1190,8 +1196,6 @@ static int sta_apply_parameters(struct ieee80211_local *local, struct station_parameters *params) { int ret = 0; - u32 rates; - int i, j; struct ieee80211_supported_band *sband; struct ieee80211_sub_if_data *sdata = sta->sdata; enum ieee80211_band band = ieee80211_get_sdata_band(sdata); @@ -1284,16 +1288,10 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->listen_interval = params->listen_interval; if (params->supported_rates) { - rates = 0; - - for (i = 0; i < params->supported_rates_len; i++) { - int rate = (params->supported_rates[i] & 0x7f) * 5; - for (j = 0; j < sband->n_bitrates; j++) { - if (sband->bitrates[j].bitrate == rate) - rates |= BIT(j); - } - } - sta->sta.supp_rates[band] = rates; + ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, + sband, params->supported_rates, + params->supported_rates_len, + &sta->sta.supp_rates[band]); } if (params->ht_capa) @@ -1956,18 +1954,11 @@ static int ieee80211_change_bss(struct wiphy *wiphy, } if (params->basic_rates) { - int i, j; - u32 rates = 0; - struct ieee80211_supported_band *sband = wiphy->bands[band]; - - for (i = 0; i < params->basic_rates_len; i++) { - int rate = (params->basic_rates[i] & 0x7f) * 5; - for (j = 0; j < sband->n_bitrates; j++) { - if (sband->bitrates[j].bitrate == rate) - rates |= BIT(j); - } - } - sdata->vif.bss_conf.basic_rates = rates; + ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, + wiphy->bands[band], + params->basic_rates, + params->basic_rates_len, + &sdata->vif.bss_conf.basic_rates); changed |= BSS_CHANGED_BASIC_RATES; } -- cgit v1.2.3-18-g5258