From 1431574a1c4c669a0c198e4763627837416e4443 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Wed, 11 Sep 2013 14:23:53 -0700 Subject: lib/decompressors: fix "no limit" output buffer length When decompressing into memory, the output buffer length is set to some arbitrarily high value (0x7fffffff) to indicate the output is, virtually, unlimited in size. The problem with this is that some platforms have their physical memory at high physical addresses (0x80000000 or more), and that the output buffer address and its "unlimited" length cannot be added without overflowing. An example of this can be found in inflate_fast(): /* next_out is the output buffer address */ out = strm->next_out - OFF; /* avail_out is the output buffer size. end will overflow if the output * address is >= 0x80000104 */ end = out + (strm->avail_out - 257); This has huge consequences on the performance of kernel decompression, since the following exit condition of inflate_fast() will be always true: } while (in < last && out < end); Indeed, "end" has overflowed and is now always lower than "out". As a result, inflate_fast() will return after processing one single byte of input data, and will thus need to be called an unreasonably high number of times. This probably went unnoticed because kernel decompression is fast enough even with this issue. Nonetheless, adjusting the output buffer length in such a way that the above pointer arithmetic never overflows results in a kernel decompression that is about 3 times faster on affected machines. Signed-off-by: Alexandre Courbot Tested-by: Jon Medhurst Cc: Stephen Warren Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/decompress_inflate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib') diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c index 19ff89e34ee..d619b28c456 100644 --- a/lib/decompress_inflate.c +++ b/lib/decompress_inflate.c @@ -48,7 +48,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len, out_len = 0x8000; /* 32 K */ out_buf = malloc(out_len); } else { - out_len = 0x7fffffff; /* no limit */ + out_len = ((size_t)~0) - (size_t)out_buf; /* no limit */ } if (!out_buf) { error("Out of memory while allocating output buffer"); -- cgit v1.2.3-18-g5258