From 64dec40ddee9d36d7b83f8a0513fdeaffe260a0e Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 16 Jan 2009 13:23:35 -0500 Subject: x86: define ARCH_WANT_FRAME_POINTERS Commit da4276b8299a6544dc41ac2485d3ffca5811b3fb changed a dependency for FRAME_POINTER from X86 to ARCH_WANT_FRAME_POINTERS, but didn't actually define it. This patch adds the definition for ARCH_WANT_FRAME_POINTERS. Without it, FRAME_POINTER can't be enabled on x86. Signed-off-by: Jeff Mahoney Signed-off-by: Ingo Molnar --- lib/Kconfig.debug | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'lib/Kconfig.debug') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c9ae6085c7..d30561dda90 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -570,6 +570,15 @@ config DEBUG_NOTIFIERS This is a relatively cheap check but if you care about maximum performance, say N. +# +# Select this config option from the architecture Kconfig, if it +# it is preferred to always offer frame pointers as a config +# option on the architecture (regardless of KERNEL_DEBUG): +# +config ARCH_WANT_FRAME_POINTERS + bool + help + config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ -- cgit v1.2.3-18-g5258 From 749a440b2218e9937dca8c68e23e51ca4d8d37fe Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 22 Jan 2009 09:46:38 +0800 Subject: rcu: remove duplicate CONFIG_RCU_CPU_STALL_DETECTOR Impact: remove the old CONFIG_RCU_CPU_STALL_DETECTOR tree_rcu introduce CONFIG_RCU_CPU_STALL_DETECTOR again. These two are the same exactly except: the old one "depends on CLASSIC_RCU" the new one "depends on CLASSIC_RCU || TREE_RCU" This patch remove the old one. Signed-off-by: Lai Jiangshan Signed-off-by: Ingo Molnar --- lib/Kconfig.debug | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'lib/Kconfig.debug') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c9ae6085c7..e770e85f76c 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -631,19 +631,6 @@ config RCU_TORTURE_TEST_RUNNABLE Say N here if you want the RCU torture tests to start only after being manually enabled via /proc. -config RCU_CPU_STALL_DETECTOR - bool "Check for stalled CPUs delaying RCU grace periods" - depends on CLASSIC_RCU - default n - help - This option causes RCU to printk information on which - CPUs are delaying the current grace period, but only when - the grace period extends for excessive time periods. - - Say Y if you want RCU to perform such checks. - - Say N if you are unsure. - config RCU_CPU_STALL_DETECTOR bool "Check for stalled CPUs delaying RCU grace periods" depends on CLASSIC_RCU || TREE_RCU -- cgit v1.2.3-18-g5258 From 152de30bced150617e5731a9fe2364c9d04fe26c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 20 Feb 2009 15:38:47 -0800 Subject: docsrc: use config instead of menuconfig BUILD_DOCSRC should be controlled by "config" instead of "menuconfig". I have no idea how I managed to use "menuconfig" here. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib/Kconfig.debug') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 29044f50026..1bcf9cd4baa 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -838,7 +838,7 @@ config FIREWIRE_OHCI_REMOTE_DMA If unsure, say N. -menuconfig BUILD_DOCSRC +config BUILD_DOCSRC bool "Build targets in Documentation/ tree" depends on HEADERS_CHECK help -- cgit v1.2.3-18-g5258 From e9d376f0fa66bd630fe27403669c6ae6c22a868f Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 5 Feb 2009 11:51:38 -0500 Subject: dynamic debug: combine dprintk and dynamic printk This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'lib/Kconfig.debug') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 1bcf9cd4baa..0dd1c04c732 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -847,7 +847,7 @@ config BUILD_DOCSRC Say N if you are unsure. -config DYNAMIC_PRINTK_DEBUG +config DYNAMIC_DEBUG bool "Enable dynamic printk() call support" default n depends on PRINTK -- cgit v1.2.3-18-g5258 From 86151fdf38b3795f292b39defbff39d2684b9c8c Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Thu, 5 Feb 2009 11:53:15 -0500 Subject: dynamic debug: update docs updates the documentation for 'dynamic debug' feature. Signed-off-by: Greg Banks Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- lib/Kconfig.debug | 72 +++++++++++++++++++++++++++++++------------------------ 1 file changed, 41 insertions(+), 31 deletions(-) (limited to 'lib/Kconfig.debug') diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0dd1c04c732..8fee0a13ac5 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -848,59 +848,69 @@ config BUILD_DOCSRC Say N if you are unsure. config DYNAMIC_DEBUG - bool "Enable dynamic printk() call support" + bool "Enable dynamic printk() support" default n depends on PRINTK + depends on DEBUG_FS select PRINTK_DEBUG help Compiles debug level messages into the kernel, which would not otherwise be available at runtime. These messages can then be - enabled/disabled on a per module basis. This mechanism implicitly - enables all pr_debug() and dev_dbg() calls. The impact of this - compile option is a larger kernel text size of about 2%. + enabled/disabled based on various levels of scope - per source file, + function, module, format string, and line number. This mechanism + implicitly enables all pr_debug() and dev_dbg() calls. The impact of + this compile option is a larger kernel text size of about 2%. Usage: - Dynamic debugging is controlled by the debugfs file, - dynamic_printk/modules. This file contains a list of the modules that - can be enabled. The format of the file is the module name, followed - by a set of flags that can be enabled. The first flag is always the - 'enabled' flag. For example: + Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file, + which is contained in the 'debugfs' filesystem. Thus, the debugfs + filesystem must first be mounted before making use of this feature. + We refer the control file as: /dynamic_debug/ddebug. This + file contains a list of the debug statements that can be enabled. The + format for each line of the file is: - - . - . - . + filename:lineno [module]function flags format - : Name of the module in which the debug call resides - : whether the messages are enabled or not + filename : source file of the debug statement + lineno : line number of the debug statement + module : module that contains the debug statement + function : function that contains the debug statement + flags : 'p' means the line is turned 'on' for printing + format : the format used for the debug statement From a live system: - snd_hda_intel enabled=0 - fixup enabled=0 - driver enabled=0 + nullarbor:~ # cat /dynamic_debug/ddebug + # filename:lineno [module]function flags format + fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012" + fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012" + fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012" - Enable a module: + Example usage: - $echo "set enabled=1 " > dynamic_printk/modules + // enable the message at line 1603 of file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > + /dynamic_debug/ddebug - Disable a module: + // enable all the messages in file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c +p' > + /dynamic_debug/ddebug - $echo "set enabled=0 " > dynamic_printk/modules + // enable all the messages in the NFS server module + nullarbor:~ # echo -n 'module nfsd +p' > + /dynamic_debug/ddebug - Enable all modules: + // enable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process +p' > + /dynamic_debug/ddebug - $echo "set enabled=1 all" > dynamic_printk/modules + // disable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process -p' > + /dynamic_debug/ddebug - Disable all modules: - - $echo "set enabled=0 all" > dynamic_printk/modules - - Finally, passing "dynamic_printk" at the command line enables - debugging for all modules. This mode can be turned off via the above - disable command. + See Documentation/dynamic-debug-howto.txt for additional information. source "samples/Kconfig" -- cgit v1.2.3-18-g5258