From ca109491f612aab5c8152207631c0444f63da97f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 25 Nov 2008 12:43:51 +0100 Subject: hrtimer: removing all ur callback modes Impact: cleanup, move all hrtimer processing into hardirq context This is an attempt at removing some of the hrtimer complexity by reducing the number of callback modes to 1. This means that all hrtimer callback functions will be ran from HARD-irq context. I went through all the 30 odd hrtimer callback functions in the kernel and saw only one that I'm not quite sure of, which is the one in net/can/bcm.c - hence I'm CC-ing the folks responsible for that code. Furthermore, the hrtimer core now calls callbacks directly with IRQs disabled in case you try to enqueue an expired timer. If this timer is a periodic timer (which should use hrtimer_forward() to advance its time) then it might be possible to end up in an inf. recursive loop due to the fact that hrtimer_forward() doesn't round up to the next timer granularity, and therefore keeps on calling the callback - obviously this needs a fix. Aside from that, this seems to compile and actually boot on my dual core test box - although I'm sure there are some bugs in, me not hitting any makes me certain :-) Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 280 +++++-------------------------------------- kernel/sched.c | 2 - kernel/time/ntp.c | 4 +- kernel/time/tick-sched.c | 1 - kernel/trace/trace_sysprof.c | 1 - 5 files changed, 33 insertions(+), 255 deletions(-) (limited to 'kernel') diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 47e63349d1b..efd6f41e1c1 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -442,22 +442,6 @@ static inline void debug_hrtimer_activate(struct hrtimer *timer) { } static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { } #endif -/* - * Check, whether the timer is on the callback pending list - */ -static inline int hrtimer_cb_pending(const struct hrtimer *timer) -{ - return timer->state & HRTIMER_STATE_PENDING; -} - -/* - * Remove a timer from the callback pending list - */ -static inline void hrtimer_remove_cb_pending(struct hrtimer *timer) -{ - list_del_init(&timer->cb_entry); -} - /* High resolution timer related functions */ #ifdef CONFIG_HIGH_RES_TIMERS @@ -651,6 +635,8 @@ static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { } +static void __run_hrtimer(struct hrtimer *timer); + /* * When High resolution timers are active, try to reprogram. Note, that in case * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry @@ -661,31 +647,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, struct hrtimer_clock_base *base) { if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) { - - /* Timer is expired, act upon the callback mode */ - switch(timer->cb_mode) { - case HRTIMER_CB_IRQSAFE_PERCPU: - case HRTIMER_CB_IRQSAFE_UNLOCKED: - /* - * This is solely for the sched tick emulation with - * dynamic tick support to ensure that we do not - * restart the tick right on the edge and end up with - * the tick timer in the softirq ! The calling site - * takes care of this. Also used for hrtimer sleeper ! - */ - debug_hrtimer_deactivate(timer); - return 1; - case HRTIMER_CB_SOFTIRQ: - /* - * Move everything else into the softirq pending list ! - */ - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - timer->state = HRTIMER_STATE_PENDING; - return 1; - default: - BUG(); - } + /* + * XXX: recursion check? + * hrtimer_forward() should round up with timer granularity + * so that we never get into inf recursion here, + * it doesn't do that though + */ + __run_hrtimer(timer); + return 1; } return 0; } @@ -724,11 +693,6 @@ static int hrtimer_switch_to_hres(void) return 1; } -static inline void hrtimer_raise_softirq(void) -{ - raise_softirq(HRTIMER_SOFTIRQ); -} - #else static inline int hrtimer_hres_active(void) { return 0; } @@ -747,7 +711,6 @@ static inline int hrtimer_reprogram(struct hrtimer *timer, { return 0; } -static inline void hrtimer_raise_softirq(void) { } #endif /* CONFIG_HIGH_RES_TIMERS */ @@ -890,10 +853,7 @@ static void __remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, unsigned long newstate, int reprogram) { - /* High res. callback list. NOP for !HIGHRES */ - if (hrtimer_cb_pending(timer)) - hrtimer_remove_cb_pending(timer); - else { + if (timer->state & HRTIMER_STATE_ENQUEUED) { /* * Remove the timer from the rbtree and replace the * first entry pointer if necessary. @@ -953,7 +913,7 @@ hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_n { struct hrtimer_clock_base *base, *new_base; unsigned long flags; - int ret, raise; + int ret; base = lock_hrtimer_base(timer, &flags); @@ -988,26 +948,8 @@ hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_n enqueue_hrtimer(timer, new_base, new_base->cpu_base == &__get_cpu_var(hrtimer_bases)); - /* - * The timer may be expired and moved to the cb_pending - * list. We can not raise the softirq with base lock held due - * to a possible deadlock with runqueue lock. - */ - raise = timer->state == HRTIMER_STATE_PENDING; - - /* - * We use preempt_disable to prevent this task from migrating after - * setting up the softirq and raising it. Otherwise, if me migrate - * we will raise the softirq on the wrong CPU. - */ - preempt_disable(); - unlock_hrtimer_base(timer, &flags); - if (raise) - hrtimer_raise_softirq(); - preempt_enable(); - return ret; } EXPORT_SYMBOL_GPL(hrtimer_start_range_ns); @@ -1192,75 +1134,6 @@ int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp) } EXPORT_SYMBOL_GPL(hrtimer_get_res); -static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) -{ - spin_lock_irq(&cpu_base->lock); - - while (!list_empty(&cpu_base->cb_pending)) { - enum hrtimer_restart (*fn)(struct hrtimer *); - struct hrtimer *timer; - int restart; - int emulate_hardirq_ctx = 0; - - timer = list_entry(cpu_base->cb_pending.next, - struct hrtimer, cb_entry); - - debug_hrtimer_deactivate(timer); - timer_stats_account_hrtimer(timer); - - fn = timer->function; - /* - * A timer might have been added to the cb_pending list - * when it was migrated during a cpu-offline operation. - * Emulate hardirq context for such timers. - */ - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || - timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) - emulate_hardirq_ctx = 1; - - __remove_hrtimer(timer, timer->base, HRTIMER_STATE_CALLBACK, 0); - spin_unlock_irq(&cpu_base->lock); - - if (unlikely(emulate_hardirq_ctx)) { - local_irq_disable(); - restart = fn(timer); - local_irq_enable(); - } else - restart = fn(timer); - - spin_lock_irq(&cpu_base->lock); - - timer->state &= ~HRTIMER_STATE_CALLBACK; - if (restart == HRTIMER_RESTART) { - BUG_ON(hrtimer_active(timer)); - /* - * Enqueue the timer, allow reprogramming of the event - * device - */ - enqueue_hrtimer(timer, timer->base, 1); - } else if (hrtimer_active(timer)) { - /* - * If the timer was rearmed on another CPU, reprogram - * the event device. - */ - struct hrtimer_clock_base *base = timer->base; - - if (base->first == &timer->node && - hrtimer_reprogram(timer, base)) { - /* - * Timer is expired. Thus move it from tree to - * pending list again. - */ - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - } - } - } - spin_unlock_irq(&cpu_base->lock); -} - static void __run_hrtimer(struct hrtimer *timer) { struct hrtimer_clock_base *base = timer->base; @@ -1268,25 +1141,21 @@ static void __run_hrtimer(struct hrtimer *timer) enum hrtimer_restart (*fn)(struct hrtimer *); int restart; + WARN_ON(!irqs_disabled()); + debug_hrtimer_deactivate(timer); __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0); timer_stats_account_hrtimer(timer); - fn = timer->function; - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || - timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) { - /* - * Used for scheduler timers, avoid lock inversion with - * rq->lock and tasklist_lock. - * - * These timers are required to deal with enqueue expiry - * themselves and are not allowed to migrate. - */ - spin_unlock(&cpu_base->lock); - restart = fn(timer); - spin_lock(&cpu_base->lock); - } else - restart = fn(timer); + + /* + * Because we run timers from hardirq context, there is no chance + * they get migrated to another cpu, therefore its safe to unlock + * the timer base. + */ + spin_unlock(&cpu_base->lock); + restart = fn(timer); + spin_lock(&cpu_base->lock); /* * Note: We clear the CALLBACK bit after enqueue_hrtimer to avoid @@ -1311,7 +1180,7 @@ void hrtimer_interrupt(struct clock_event_device *dev) struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); struct hrtimer_clock_base *base; ktime_t expires_next, now; - int i, raise = 0; + int i; BUG_ON(!cpu_base->hres_active); cpu_base->nr_events++; @@ -1360,16 +1229,6 @@ void hrtimer_interrupt(struct clock_event_device *dev) break; } - /* Move softirq callbacks to the pending list */ - if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) { - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - raise = 1; - continue; - } - __run_hrtimer(timer); } spin_unlock(&cpu_base->lock); @@ -1383,10 +1242,6 @@ void hrtimer_interrupt(struct clock_event_device *dev) if (tick_program_event(expires_next, 0)) goto retry; } - - /* Raise softirq ? */ - if (raise) - raise_softirq(HRTIMER_SOFTIRQ); } /** @@ -1413,11 +1268,6 @@ void hrtimer_peek_ahead_timers(void) local_irq_restore(flags); } -static void run_hrtimer_softirq(struct softirq_action *h) -{ - run_hrtimer_pending(&__get_cpu_var(hrtimer_bases)); -} - #endif /* CONFIG_HIGH_RES_TIMERS */ /* @@ -1429,8 +1279,6 @@ static void run_hrtimer_softirq(struct softirq_action *h) */ void hrtimer_run_pending(void) { - struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases); - if (hrtimer_hres_active()) return; @@ -1444,8 +1292,6 @@ void hrtimer_run_pending(void) */ if (tick_check_oneshot_change(!hrtimer_is_hres_enabled())) hrtimer_switch_to_hres(); - - run_hrtimer_pending(cpu_base); } /* @@ -1482,14 +1328,6 @@ void hrtimer_run_queues(void) hrtimer_get_expires_tv64(timer)) break; - if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) { - __remove_hrtimer(timer, base, - HRTIMER_STATE_PENDING, 0); - list_add_tail(&timer->cb_entry, - &base->cpu_base->cb_pending); - continue; - } - __run_hrtimer(timer); } spin_unlock(&cpu_base->lock); @@ -1516,9 +1354,6 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task) { sl->timer.function = hrtimer_wakeup; sl->task = task; -#ifdef CONFIG_HIGH_RES_TIMERS - sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; -#endif } static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode) @@ -1655,36 +1490,22 @@ static void __cpuinit init_hrtimers_cpu(int cpu) for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) cpu_base->clock_base[i].cpu_base = cpu_base; - INIT_LIST_HEAD(&cpu_base->cb_pending); hrtimer_init_hres(cpu_base); } #ifdef CONFIG_HOTPLUG_CPU -static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, - struct hrtimer_clock_base *new_base, int dcpu) +static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, + struct hrtimer_clock_base *new_base, int dcpu) { struct hrtimer *timer; struct rb_node *node; - int raise = 0; while ((node = rb_first(&old_base->active))) { timer = rb_entry(node, struct hrtimer, node); BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); - /* - * Should not happen. Per CPU timers should be - * canceled _before_ the migration code is called - */ - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) { - __remove_hrtimer(timer, old_base, - HRTIMER_STATE_INACTIVE, 0); - WARN(1, "hrtimer (%p %p)active but cpu %d dead\n", - timer, timer->function, dcpu); - continue; - } - /* * Mark it as STATE_MIGRATE not INACTIVE otherwise the * timer could be seen as !active and just vanish away @@ -1708,48 +1529,19 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * otherwise we end up with a stale timer. */ if (timer->state == HRTIMER_STATE_MIGRATE) { - timer->state = HRTIMER_STATE_PENDING; - list_add_tail(&timer->cb_entry, - &new_base->cpu_base->cb_pending); - raise = 1; + /* XXX: running on offline cpu */ + __run_hrtimer(timer); } #endif /* Clear the migration state bit */ timer->state &= ~HRTIMER_STATE_MIGRATE; } - return raise; } -#ifdef CONFIG_HIGH_RES_TIMERS -static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, - struct hrtimer_cpu_base *new_base) -{ - struct hrtimer *timer; - int raise = 0; - - while (!list_empty(&old_base->cb_pending)) { - timer = list_entry(old_base->cb_pending.next, - struct hrtimer, cb_entry); - - __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0); - timer->base = &new_base->clock_base[timer->base->index]; - list_add_tail(&timer->cb_entry, &new_base->cb_pending); - raise = 1; - } - return raise; -} -#else -static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, - struct hrtimer_cpu_base *new_base) -{ - return 0; -} -#endif - static void migrate_hrtimers(int cpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i, raise = 0; + int i; BUG_ON(cpu_online(cpu)); old_base = &per_cpu(hrtimer_bases, cpu); @@ -1764,20 +1556,13 @@ static void migrate_hrtimers(int cpu) spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { - if (migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i], cpu)) - raise = 1; + migrate_hrtimer_list(&old_base->clock_base[i], + &new_base->clock_base[i], cpu); } - if (migrate_hrtimer_pending(old_base, new_base)) - raise = 1; - spin_unlock(&old_base->lock); spin_unlock_irq(&new_base->lock); put_cpu_var(hrtimer_bases); - - if (raise) - hrtimer_raise_softirq(); } #endif /* CONFIG_HOTPLUG_CPU */ @@ -1817,9 +1602,6 @@ void __init hrtimers_init(void) hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); -#ifdef CONFIG_HIGH_RES_TIMERS - open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); -#endif } /** diff --git a/kernel/sched.c b/kernel/sched.c index 9b1e79371c2..5ac5e953616 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -203,7 +203,6 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime) hrtimer_init(&rt_b->rt_period_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rt_b->rt_period_timer.function = sched_rt_period_timer; - rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; } static inline int rt_bandwidth_enabled(void) @@ -1139,7 +1138,6 @@ static void init_rq_hrtick(struct rq *rq) hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rq->hrtick_timer.function = hrtick; - rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; } #else /* CONFIG_SCHED_HRTICK */ static inline void hrtick_clear(struct rq *rq) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 8ff15e5d486..f5f793d9241 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -131,7 +131,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) { enum hrtimer_restart res = HRTIMER_NORESTART; - write_seqlock_irq(&xtime_lock); + write_seqlock(&xtime_lock); switch (time_state) { case TIME_OK: @@ -164,7 +164,7 @@ static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) } update_vsyscall(&xtime, clock); - write_sequnlock_irq(&xtime_lock); + write_sequnlock(&xtime_lock); return res; } diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 342fc9ccab4..502a81e2639 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -681,7 +681,6 @@ void tick_setup_sched_timer(void) */ hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); ts->sched_timer.function = tick_sched_timer; - ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; /* Get the next period (per cpu) */ hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update()); diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 9587d3bcba5..ae542e2e38d 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -202,7 +202,6 @@ static void start_stack_timer(int cpu) hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = stack_trace_timer_fn; - hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL); } -- cgit v1.2.3-18-g5258 From 37810659ea7d9572c5ac284ade272f806ef8f788 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 4 Dec 2008 11:17:10 +0100 Subject: hrtimer: removing all ur callback modes, fix hotplug Impact: fix hrtimer locking (reported by lockdep) in the CPU hotplug case This addition fixes the hotplug locking issue on my machine Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 65 ++++++++++++++++++++++++++++++++------------------------ 1 file changed, 37 insertions(+), 28 deletions(-) (limited to 'kernel') diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index efd6f41e1c1..b09c7a27631 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1496,7 +1496,7 @@ static void __cpuinit init_hrtimers_cpu(int cpu) #ifdef CONFIG_HOTPLUG_CPU static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, - struct hrtimer_clock_base *new_base, int dcpu) + struct hrtimer_clock_base *new_base) { struct hrtimer *timer; struct rb_node *node; @@ -1514,40 +1514,34 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); timer->base = new_base; /* - * Enqueue the timer. Allow reprogramming of the event device + * Enqueue the timers on the new cpu, but do not reprogram + * the timer as that would enable a deadlock between + * hrtimer_enqueue_reprogramm() running the timer and us still + * holding a nested base lock. + * + * Instead we tickle the hrtimer interrupt after the migration + * is done, which will run all expired timers and re-programm + * the timer device. */ - enqueue_hrtimer(timer, new_base, 1); + enqueue_hrtimer(timer, new_base, 0); -#ifdef CONFIG_HIGH_RES_TIMERS - /* - * Happens with high res enabled when the timer was - * already expired and the callback mode is - * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The - * enqueue code does not move them to the soft irq - * pending list for performance/latency reasons, but - * in the migration state, we need to do that - * otherwise we end up with a stale timer. - */ - if (timer->state == HRTIMER_STATE_MIGRATE) { - /* XXX: running on offline cpu */ - __run_hrtimer(timer); - } -#endif /* Clear the migration state bit */ timer->state &= ~HRTIMER_STATE_MIGRATE; } } -static void migrate_hrtimers(int cpu) +static int migrate_hrtimers(int scpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i; + int dcpu, i; - BUG_ON(cpu_online(cpu)); - old_base = &per_cpu(hrtimer_bases, cpu); + BUG_ON(cpu_online(scpu)); + old_base = &per_cpu(hrtimer_bases, scpu); new_base = &get_cpu_var(hrtimer_bases); - tick_cancel_sched_timer(cpu); + dcpu = smp_processor_id(); + + tick_cancel_sched_timer(scpu); /* * The caller is globally serialized and nobody else * takes two locks at once, deadlock is not possible. @@ -1557,32 +1551,47 @@ static void migrate_hrtimers(int cpu) for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i], cpu); + &new_base->clock_base[i]); } spin_unlock(&old_base->lock); spin_unlock_irq(&new_base->lock); put_cpu_var(hrtimer_bases); + + return dcpu; +} + +static void tickle_timers(void *arg) +{ + hrtimer_peek_ahead_timers(); } + #endif /* CONFIG_HOTPLUG_CPU */ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { - unsigned int cpu = (long)hcpu; + int dcpu = -1, scpu = (long)hcpu; switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - init_hrtimers_cpu(cpu); + init_hrtimers_cpu(scpu); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: - clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &cpu); - migrate_hrtimers(cpu); + clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu); + dcpu = migrate_hrtimers(scpu); + break; + + case CPU_POST_DEAD: + if (dcpu == -1) + break; + + smp_call_function_single(dcpu, tickle_timers, NULL, 0); break; #endif -- cgit v1.2.3-18-g5258 From a0a99b227da57f81319dd239bc4de811b0f530ec Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 8 Dec 2008 17:13:02 +0100 Subject: hrtimer: removing all ur callback modes, fix > Ingo, this addition fixes the hotplug issue on my machine And because we're all human... Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'kernel') diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index b09c7a27631..b741f850426 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1571,7 +1571,7 @@ static void tickle_timers(void *arg) static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { - int dcpu = -1, scpu = (long)hcpu; + int dcpu, scpu = (long)hcpu; switch (action) { @@ -1585,12 +1585,6 @@ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, case CPU_DEAD_FROZEN: clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu); dcpu = migrate_hrtimers(scpu); - break; - - case CPU_POST_DEAD: - if (dcpu == -1) - break; - smp_call_function_single(dcpu, tickle_timers, NULL, 0); break; #endif -- cgit v1.2.3-18-g5258 From fa116ea35ec7f40e890972324409e99eed008d56 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 11 Dec 2008 17:04:11 +0100 Subject: nohz: no softirq pending warnings for offline cpus Impact: remove false positive warning After a cpu was taken down during cpu hotplug (read: disabled for interrupts) it still might have pending softirqs. However take_cpu_down makes sure that the idle task will run next instead of ksoftirqd on the taken down cpu. The idle task will call tick_nohz_stop_sched_tick which might warn about pending softirqs just before the cpu kills itself completely. However the pending softirqs on the dead cpu aren't a problem because they will be moved to an online cpu during CPU_DEAD handling. So make sure we warn only for online cpus. Signed-off-by: Heiko Carstens Signed-off-by: Ingo Molnar --- kernel/time/tick-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel') diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 342fc9ccab4..dc17ffcf191 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -247,7 +247,7 @@ void tick_nohz_stop_sched_tick(int inidle) if (need_resched()) goto end; - if (unlikely(local_softirq_pending())) { + if (unlikely(local_softirq_pending() && cpu_online(cpu))) { static int ratelimit; if (ratelimit < 10) { -- cgit v1.2.3-18-g5258 From 001474491fabeca233168a8598f721c808040f90 Mon Sep 17 00:00:00 2001 From: "Woodruff, Richard" Date: Mon, 1 Dec 2008 14:18:11 -0800 Subject: nohz: suppress needless timer reprogramming In my device I get many interrupts from a high speed USB device in a very short period of time. The system spends a lot of time reprogramming the hardware timer which is in a slower timing domain as compared to the CPU. This results in the CPU spending a huge amount of time waiting for the timer posting to be done. All of this reprogramming is useless as the wake up time has not changed. As measured using ETM trace this drops my reprogramming penalty from almost 60% CPU load down to 15% during high interrupt rate. I can send traces to show this. Suppress setting of duplicate timer event when timer already stopped. Timer programming can be very costly and can result in long cpu stall/wait times. [akpm@linux-foundation.org: coding-style fixes] [tglx@linutronix.de: move the check to the right place and avoid raising the softirq for nothing] Signed-off-by: Richard Woodruff Cc: johnstul@us.ibm.com Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 41 ++++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-) (limited to 'kernel') diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index dc17ffcf191..87fc34f21db 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -282,8 +282,31 @@ void tick_nohz_stop_sched_tick(int inidle) /* Schedule the tick, if we are at least one jiffie off */ if ((long)delta_jiffies >= 1) { + /* + * calculate the expiry time for the next timer wheel + * timer + */ + expires = ktime_add_ns(last_update, tick_period.tv64 * + delta_jiffies); + + /* + * If this cpu is the one which updates jiffies, then + * give up the assignment and let it be taken by the + * cpu which runs the tick timer next, which might be + * this cpu as well. If we don't drop this here the + * jiffies might be stale and do_timer() never + * invoked. + */ + if (cpu == tick_do_timer_cpu) + tick_do_timer_cpu = TICK_DO_TIMER_NONE; + if (delta_jiffies > 1) cpu_set(cpu, nohz_cpu_mask); + + /* Skip reprogram of event if its not changed */ + if (ts->tick_stopped && ktime_equal(expires, dev->next_event)) + goto out; + /* * nohz_stop_sched_tick can be called several times before * the nohz_restart_sched_tick is called. This happens when @@ -306,17 +329,6 @@ void tick_nohz_stop_sched_tick(int inidle) rcu_enter_nohz(); } - /* - * If this cpu is the one which updates jiffies, then - * give up the assignment and let it be taken by the - * cpu which runs the tick timer next, which might be - * this cpu as well. If we don't drop this here the - * jiffies might be stale and do_timer() never - * invoked. - */ - if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = TICK_DO_TIMER_NONE; - ts->idle_sleeps++; /* @@ -332,12 +344,7 @@ void tick_nohz_stop_sched_tick(int inidle) goto out; } - /* - * calculate the expiry time for the next timer wheel - * timer - */ - expires = ktime_add_ns(last_update, tick_period.tv64 * - delta_jiffies); + /* Mark expiries */ ts->idle_expires = expires; if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { -- cgit v1.2.3-18-g5258 From 27af4245b6ce99e08c6a7c38825383bf51119cc9 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 1 Dec 2008 14:18:13 -0800 Subject: posix-timers: use "struct pid*" instead of "struct task_struct*" Impact: restructure, clean up code k_itimer holds the ref to the ->it_process until sys_timer_delete(). This allows to pin up to RLIMIT_SIGPENDING dead task_struct's. Change the code to use "struct pid *" instead. The patch doesn't kill ->it_process, it places ->it_pid into the union. ->it_process is still used by do_cpu_nanosleep() as before. It would be trivial to change the nanosleep code as well, but since it uses it_process in a special way I think it is better to keep this field for grep. The patch bloats the kernel by 104 bytes and it also adds the new pointer, ->it_signal, to k_itimer. It is used by lock_timer() to verify that the found timer was not created by another process. It is not clear why do we use the global database (and thus the global idr_lock) for posix timers. We still need the signal_struct->posix_timers which contains all useable timers, perhaps it is better to use some form of per-process array instead. Signed-off-by: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/posix-timers.c | 43 +++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'kernel') diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 5e79c662294..42a39afd694 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -116,7 +116,7 @@ static DEFINE_SPINLOCK(idr_lock); * must supply functions here, even if the function just returns * ENOSYS. The standard POSIX timer management code assumes the * following: 1.) The k_itimer struct (sched.h) is used for the - * timer. 2.) The list, it_lock, it_clock, it_id and it_process + * timer. 2.) The list, it_lock, it_clock, it_id and it_pid * fields are not modified by timer code. * * At this time all functions EXCEPT clock_nanosleep can be @@ -313,7 +313,8 @@ void do_schedule_next_timer(struct siginfo *info) int posix_timer_event(struct k_itimer *timr, int si_private) { - int shared, ret; + struct task_struct *task; + int shared, ret = -1; /* * FIXME: if ->sigq is queued we can race with * dequeue_signal()->do_schedule_next_timer(). @@ -327,8 +328,13 @@ int posix_timer_event(struct k_itimer *timr, int si_private) */ timr->sigq->info.si_sys_private = si_private; - shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID); - ret = send_sigqueue(timr->sigq, timr->it_process, shared); + rcu_read_lock(); + task = pid_task(timr->it_pid, PIDTYPE_PID); + if (task) { + shared = !(timr->it_sigev_notify & SIGEV_THREAD_ID); + ret = send_sigqueue(timr->sigq, task, shared); + } + rcu_read_unlock(); /* If we failed to send the signal the timer stops. */ return ret > 0; } @@ -405,7 +411,7 @@ static enum hrtimer_restart posix_timer_fn(struct hrtimer *timer) return ret; } -static struct task_struct * good_sigevent(sigevent_t * event) +static struct pid *good_sigevent(sigevent_t * event) { struct task_struct *rtn = current->group_leader; @@ -419,7 +425,7 @@ static struct task_struct * good_sigevent(sigevent_t * event) ((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX))) return NULL; - return rtn; + return task_pid(rtn); } void register_posix_clock(const clockid_t clock_id, struct k_clock *new_clock) @@ -471,7 +477,7 @@ sys_timer_create(const clockid_t which_clock, { struct k_itimer *new_timer; int error, new_timer_id; - struct task_struct *process; + struct pid *it_pid; sigevent_t event; int it_id_set = IT_ID_NOT_SET; @@ -525,11 +531,9 @@ sys_timer_create(const clockid_t which_clock, goto out; } rcu_read_lock(); - process = good_sigevent(&event); - if (process) - get_task_struct(process); + it_pid = get_pid(good_sigevent(&event)); rcu_read_unlock(); - if (!process) { + if (!it_pid) { error = -EINVAL; goto out; } @@ -537,8 +541,7 @@ sys_timer_create(const clockid_t which_clock, event.sigev_notify = SIGEV_SIGNAL; event.sigev_signo = SIGALRM; event.sigev_value.sival_int = new_timer->it_id; - process = current->group_leader; - get_task_struct(process); + it_pid = get_pid(task_tgid(current)); } new_timer->it_sigev_notify = event.sigev_notify; @@ -548,7 +551,8 @@ sys_timer_create(const clockid_t which_clock, new_timer->sigq->info.si_code = SI_TIMER; spin_lock_irq(¤t->sighand->siglock); - new_timer->it_process = process; + new_timer->it_pid = it_pid; + new_timer->it_signal = current->signal; list_add(&new_timer->list, ¤t->signal->posix_timers); spin_unlock_irq(¤t->sighand->siglock); @@ -583,8 +587,7 @@ static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags) timr = idr_find(&posix_timers_id, (int)timer_id); if (timr) { spin_lock(&timr->it_lock); - if (timr->it_process && - same_thread_group(timr->it_process, current)) { + if (timr->it_pid && timr->it_signal == current->signal) { spin_unlock(&idr_lock); return timr; } @@ -831,8 +834,8 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_task_struct(timer->it_process); - timer->it_process = NULL; + put_pid(timer->it_pid); + timer->it_pid = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); @@ -858,8 +861,8 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_task_struct(timer->it_process); - timer->it_process = NULL; + put_pid(timer->it_pid); + timer->it_pid = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); -- cgit v1.2.3-18-g5258 From 899921025b406a71a8aeb2d7855658ea0cf0ed23 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 1 Dec 2008 14:18:15 -0800 Subject: posix-timers: check ->it_signal instead of ->it_pid to validate the timer Impact: clean up, speed up ->it_pid (was ->it_process) has also a special meaning: if it is NULL, the timer is under deletion or it wasn't initialized yet. We can check ->it_signal != NULL instead, this way we can - simplify sys_timer_create() a bit - remove yet another check from lock_timer() - move put_pid(->it_pid) into release_posix_timer() which runs outside of ->it_lock Signed-off-by: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- kernel/posix-timers.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'kernel') diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index 42a39afd694..aa922bbb640 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -464,6 +464,7 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set) idr_remove(&posix_timers_id, tmr->it_id); spin_unlock_irqrestore(&idr_lock, flags); } + put_pid(tmr->it_pid); sigqueue_free(tmr->sigq); kmem_cache_free(posix_timers_cache, tmr); } @@ -477,7 +478,6 @@ sys_timer_create(const clockid_t which_clock, { struct k_itimer *new_timer; int error, new_timer_id; - struct pid *it_pid; sigevent_t event; int it_id_set = IT_ID_NOT_SET; @@ -531,9 +531,9 @@ sys_timer_create(const clockid_t which_clock, goto out; } rcu_read_lock(); - it_pid = get_pid(good_sigevent(&event)); + new_timer->it_pid = get_pid(good_sigevent(&event)); rcu_read_unlock(); - if (!it_pid) { + if (!new_timer->it_pid) { error = -EINVAL; goto out; } @@ -541,7 +541,7 @@ sys_timer_create(const clockid_t which_clock, event.sigev_notify = SIGEV_SIGNAL; event.sigev_signo = SIGALRM; event.sigev_value.sival_int = new_timer->it_id; - it_pid = get_pid(task_tgid(current)); + new_timer->it_pid = get_pid(task_tgid(current)); } new_timer->it_sigev_notify = event.sigev_notify; @@ -551,7 +551,6 @@ sys_timer_create(const clockid_t which_clock, new_timer->sigq->info.si_code = SI_TIMER; spin_lock_irq(¤t->sighand->siglock); - new_timer->it_pid = it_pid; new_timer->it_signal = current->signal; list_add(&new_timer->list, ¤t->signal->posix_timers); spin_unlock_irq(¤t->sighand->siglock); @@ -587,7 +586,7 @@ static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags) timr = idr_find(&posix_timers_id, (int)timer_id); if (timr) { spin_lock(&timr->it_lock); - if (timr->it_pid && timr->it_signal == current->signal) { + if (timr->it_signal == current->signal) { spin_unlock(&idr_lock); return timr; } @@ -834,8 +833,7 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_pid(timer->it_pid); - timer->it_pid = NULL; + timer->it_signal = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); @@ -861,8 +859,7 @@ retry_delete: * This keeps any tasks waiting on the spin lock from thinking * they got something (see the lock code above). */ - put_pid(timer->it_pid); - timer->it_pid = NULL; + timer->it_signal = NULL; unlock_timer(timer, flags); release_posix_timer(timer, IT_ID_SET); -- cgit v1.2.3-18-g5258 From b2e3c0adec918ea22b6c9d7c76193dd3aaba9bd4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 19 Dec 2008 00:48:27 +0100 Subject: hrtimers: fix warning in kernel/hrtimer.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit this warning: kernel/hrtimer.c: In function ‘hrtimer_cpu_notify’: kernel/hrtimer.c:1574: warning: unused variable ‘dcpu’ is caused because 'dcpu' is only used in the CONFIG_HOTPLUG_CPU case. Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'kernel') diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index b741f850426..bda9cb92427 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1571,7 +1571,7 @@ static void tickle_timers(void *arg) static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { - int dcpu, scpu = (long)hcpu; + int scpu = (long)hcpu; switch (action) { @@ -1583,10 +1583,14 @@ static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self, #ifdef CONFIG_HOTPLUG_CPU case CPU_DEAD: case CPU_DEAD_FROZEN: + { + int dcpu; + clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu); dcpu = migrate_hrtimers(scpu); smp_call_function_single(dcpu, tickle_timers, NULL, 0); break; + } #endif default: -- cgit v1.2.3-18-g5258