From fb76dd10b91146e9cefbb3cd4e6812c5a95ee43b Mon Sep 17 00:00:00 2001 From: Luotao Fu Date: Thu, 10 Jun 2010 12:05:23 -0700 Subject: Input: matrix_keypad - add support for clustered irq This one adds support of a combined irq source for the whole matrix keypad. This can be useful if all rows and columns of the keypad are e.g. connected to a GPIO expander, which only has one interrupt line for all events on every single GPIO. Signed-off-by: Luotao Fu Acked-by: Eric Miao Signed-off-by: Dmitry Torokhov --- include/linux/input/matrix_keypad.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index c964cd7f436..80352ad6581 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -41,6 +41,9 @@ struct matrix_keymap_data { * @col_scan_delay_us: delay, measured in microseconds, that is * needed before we can keypad after activating column gpio * @debounce_ms: debounce interval in milliseconds + * @clustered_irq: may be specified if interrupts of all row/column GPIOs + * are bundled to one single irq + * @clustered_irq_flags: flags that are needed for the clustered irq * @active_low: gpio polarity * @wakeup: controls whether the device should be set up as wakeup * source @@ -63,6 +66,9 @@ struct matrix_keypad_platform_data { /* key debounce interval in milli-second */ unsigned int debounce_ms; + unsigned int clustered_irq; + unsigned int clustered_irq_flags; + bool active_low; bool wakeup; bool no_autorepeat; -- cgit v1.2.3-18-g5258 From 63a6404d8ae693e71ab27c4f9c4032aa29113e92 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 10 Jun 2010 12:05:24 -0700 Subject: Input: evdev - use driver hint to compute size of event buffer Some devices, in particular MT devices, produce a lot of data. This may lead to overflowing of the event queues in evdev driver, which by default are fairly small. Let the drivers hint the average number of events per packet generated by the device, and use that information when computing the buffer size evdev should use for the device. Signed-off-by: Henrik Rydberg Acked-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index 6fcc9101bee..cc524c8b670 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1063,6 +1063,10 @@ struct ff_effect { * @sndbit: bitmap of sound effects supported by the device * @ffbit: bitmap of force feedback effects supported by the device * @swbit: bitmap of switches present on the device + * @hint_events_per_packet: average number of events generated by the + * device in a packet (between EV_SYN/SYN_REPORT events). Used by + * event handlers to estimate size of the buffer needed to hold + * events. * @keycodemax: size of keycode table * @keycodesize: size of elements in keycode table * @keycode: map of scancodes to keycodes for this device @@ -1140,6 +1144,8 @@ struct input_dev { unsigned long ffbit[BITS_TO_LONGS(FF_CNT)]; unsigned long swbit[BITS_TO_LONGS(SW_CNT)]; + unsigned int hint_events_per_packet; + unsigned int keycodemax; unsigned int keycodesize; void *keycode; @@ -1408,6 +1414,21 @@ static inline void input_mt_sync(struct input_dev *dev) void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); +/** + * input_set_events_per_packet - tell handlers about the driver event rate + * @dev: the input device used by the driver + * @n_events: the average number of events between calls to input_sync() + * + * If the event rate sent from a device is unusually large, use this + * function to set the expected event rate. This will allow handlers + * to set up an appropriate buffer size for the event stream, in order + * to minimize information loss. + */ +static inline void input_set_events_per_packet(struct input_dev *dev, int n_events) +{ + dev->hint_events_per_packet = n_events; +} + static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat) { dev->absmin[axis] = min; -- cgit v1.2.3-18-g5258 From 69a4af606ed4836faa2ec69b1d217f384b8235e7 Mon Sep 17 00:00:00 2001 From: Xiaolong CHEN Date: Thu, 24 Jun 2010 19:10:40 -0700 Subject: Input: adp5588-keys - support GPI events for ADP5588 devices A column or row configured as a GPI can be programmed to be part of the key event table and therefore also capable of generating a key event interrupt. A key event interrupt caused by a GPI follows the same process flow as a key event interrupt caused by a key press. GPIs configured as part of the key event table allow single key switches and other GPI interrupts to be monitored. As part of the event table, GPIs are represented by the decimal value 97 (0x61 or 1100001) through the decimal value 114 (0x72 or 1110010). See table below for GPI event number assignments for rows and columns. GPI Event Number Assignments for Rows Row0 Row1 Row2 Row3 Row4 Row5 Row6 Row7 97 98 99 100 101 102 103 104 GPI Event Number Assignments for Cols Col0 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 105 106 107 108 109 110 111 112 113 114 Signed-off-by: Xiaolong Chen Signed-off-by: Yuanbo Ye Signed-off-by: Tao Hu Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- include/linux/i2c/adp5588.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include') diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index 02c9af37474..b5f57c498e2 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -78,6 +78,40 @@ #define ADP5588_KEYMAPSIZE 80 +#define GPI_PIN_ROW0 97 +#define GPI_PIN_ROW1 98 +#define GPI_PIN_ROW2 99 +#define GPI_PIN_ROW3 100 +#define GPI_PIN_ROW4 101 +#define GPI_PIN_ROW5 102 +#define GPI_PIN_ROW6 103 +#define GPI_PIN_ROW7 104 +#define GPI_PIN_COL0 105 +#define GPI_PIN_COL1 106 +#define GPI_PIN_COL2 107 +#define GPI_PIN_COL3 108 +#define GPI_PIN_COL4 109 +#define GPI_PIN_COL5 110 +#define GPI_PIN_COL6 111 +#define GPI_PIN_COL7 112 +#define GPI_PIN_COL8 113 +#define GPI_PIN_COL9 114 + +#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 +#define GPI_PIN_ROW_END GPI_PIN_ROW7 +#define GPI_PIN_COL_BASE GPI_PIN_COL0 +#define GPI_PIN_COL_END GPI_PIN_COL9 + +#define GPI_PIN_BASE GPI_PIN_ROW_BASE +#define GPI_PIN_END GPI_PIN_COL_END + +#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) + +struct adp5588_gpi_map { + unsigned short pin; + unsigned short sw_evt; +}; + struct adp5588_kpad_platform_data { int rows; /* Number of rows */ int cols; /* Number of columns */ @@ -87,6 +121,8 @@ struct adp5588_kpad_platform_data { unsigned en_keylock:1; /* Enable Key Lock feature */ unsigned short unlock_key1; /* Unlock Key 1 */ unsigned short unlock_key2; /* Unlock Key 2 */ + const struct adp5588_gpi_map *gpimap; + unsigned short gpimapsize; }; struct adp5588_gpio_platform_data { -- cgit v1.2.3-18-g5258 From e27c729219ad24c8ac9a4b34cf192e56917565c5 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 25 Jun 2010 08:44:10 -0700 Subject: Input: add driver for ADXL345/346 Digital Accelerometers This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by: Michael Hennerich Signed-off-by: Chris Verges Signed-off-by: Luotao Fu Signed-off-by: Barry Song Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- include/linux/input/adxl34x.h | 293 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 293 insertions(+) create mode 100644 include/linux/input/adxl34x.h (limited to 'include') diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h new file mode 100644 index 00000000000..71211823803 --- /dev/null +++ b/include/linux/input/adxl34x.h @@ -0,0 +1,293 @@ +/* + * include/linux/input/adxl34x.h + * + * Digital Accelerometer characteristics are highly application specific + * and may vary between boards and models. The platform_data for the + * device's "struct device" holds this information. + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_INPUT_ADXL34X_H__ +#define __LINUX_INPUT_ADXL34X_H__ + +struct adxl34x_platform_data { + + /* + * X,Y,Z Axis Offset: + * offer user offset adjustments in twoscompliment + * form with a scale factor of 15.6 mg/LSB (i.e. 0x7F = +2 g) + */ + + s8 x_axis_offset; + s8 y_axis_offset; + s8 z_axis_offset; + + /* + * TAP_X/Y/Z Enable: Setting TAP_X, Y, or Z Enable enables X, + * Y, or Z participation in Tap detection. A '0' excludes the + * selected axis from participation in Tap detection. + * Setting the SUPPRESS bit suppresses Double Tap detection if + * acceleration greater than tap_threshold is present between + * taps. + */ + +#define ADXL_SUPPRESS (1 << 3) +#define ADXL_TAP_X_EN (1 << 2) +#define ADXL_TAP_Y_EN (1 << 1) +#define ADXL_TAP_Z_EN (1 << 0) + + u8 tap_axis_control; + + /* + * tap_threshold: + * holds the threshold value for tap detection/interrupts. + * The data format is unsigned. The scale factor is 62.5 mg/LSB + * (i.e. 0xFF = +16 g). A zero value may result in undesirable + * behavior if Tap/Double Tap is enabled. + */ + + u8 tap_threshold; + + /* + * tap_duration: + * is an unsigned time value representing the maximum + * time that an event must be above the tap_threshold threshold + * to qualify as a tap event. The scale factor is 625 us/LSB. A zero + * value will prevent Tap/Double Tap functions from working. + */ + + u8 tap_duration; + + /* + * tap_latency: + * is an unsigned time value representing the wait time + * from the detection of a tap event to the opening of the time + * window tap_window for a possible second tap event. The scale + * factor is 1.25 ms/LSB. A zero value will disable the Double Tap + * function. + */ + + u8 tap_latency; + + /* + * tap_window: + * is an unsigned time value representing the amount + * of time after the expiration of tap_latency during which a second + * tap can begin. The scale factor is 1.25 ms/LSB. A zero value will + * disable the Double Tap function. + */ + + u8 tap_window; + + /* + * act_axis_control: + * X/Y/Z Enable: A '1' enables X, Y, or Z participation in activity + * or inactivity detection. A '0' excludes the selected axis from + * participation. If all of the axes are excluded, the function is + * disabled. + * AC/DC: A '0' = DC coupled operation and a '1' = AC coupled + * operation. In DC coupled operation, the current acceleration is + * compared with activity_threshold and inactivity_threshold directly + * to determine whether activity or inactivity is detected. In AC + * coupled operation for activity detection, the acceleration value + * at the start of activity detection is taken as a reference value. + * New samples of acceleration are then compared to this + * reference value and if the magnitude of the difference exceeds + * activity_threshold the device will trigger an activity interrupt. In + * AC coupled operation for inactivity detection, a reference value + * is used again for comparison and is updated whenever the + * device exceeds the inactivity threshold. Once the reference + * value is selected, the device compares the magnitude of the + * difference between the reference value and the current + * acceleration with inactivity_threshold. If the difference is below + * inactivity_threshold for a total of inactivity_time, the device is + * considered inactive and the inactivity interrupt is triggered. + */ + +#define ADXL_ACT_ACDC (1 << 7) +#define ADXL_ACT_X_EN (1 << 6) +#define ADXL_ACT_Y_EN (1 << 5) +#define ADXL_ACT_Z_EN (1 << 4) +#define ADXL_INACT_ACDC (1 << 3) +#define ADXL_INACT_X_EN (1 << 2) +#define ADXL_INACT_Y_EN (1 << 1) +#define ADXL_INACT_Z_EN (1 << 0) + + u8 act_axis_control; + + /* + * activity_threshold: + * holds the threshold value for activity detection. + * The data format is unsigned. The scale factor is + * 62.5 mg/LSB. A zero value may result in undesirable behavior if + * Activity interrupt is enabled. + */ + + u8 activity_threshold; + + /* + * inactivity_threshold: + * holds the threshold value for inactivity + * detection. The data format is unsigned. The scale + * factor is 62.5 mg/LSB. A zero value may result in undesirable + * behavior if Inactivity interrupt is enabled. + */ + + u8 inactivity_threshold; + + /* + * inactivity_time: + * is an unsigned time value representing the + * amount of time that acceleration must be below the value in + * inactivity_threshold for inactivity to be declared. The scale factor + * is 1 second/LSB. Unlike the other interrupt functions, which + * operate on unfiltered data, the inactivity function operates on the + * filtered output data. At least one output sample must be + * generated for the inactivity interrupt to be triggered. This will + * result in the function appearing un-responsive if the + * inactivity_time register is set with a value less than the time + * constant of the Output Data Rate. A zero value will result in an + * interrupt when the output data is below inactivity_threshold. + */ + + u8 inactivity_time; + + /* + * free_fall_threshold: + * holds the threshold value for Free-Fall detection. + * The data format is unsigned. The root-sum-square(RSS) value + * of all axes is calculated and compared to the value in + * free_fall_threshold to determine if a free fall event may be + * occurring. The scale factor is 62.5 mg/LSB. A zero value may + * result in undesirable behavior if Free-Fall interrupt is + * enabled. Values between 300 and 600 mg (0x05 to 0x09) are + * recommended. + */ + + u8 free_fall_threshold; + + /* + * free_fall_time: + * is an unsigned time value representing the minimum + * time that the RSS value of all axes must be less than + * free_fall_threshold to generate a Free-Fall interrupt. The + * scale factor is 5 ms/LSB. A zero value may result in + * undesirable behavior if Free-Fall interrupt is enabled. + * Values between 100 to 350 ms (0x14 to 0x46) are recommended. + */ + + u8 free_fall_time; + + /* + * data_rate: + * Selects device bandwidth and output data rate. + * RATE = 3200 Hz / (2^(15 - x)). Default value is 0x0A, or 100 Hz + * Output Data Rate. An Output Data Rate should be selected that + * is appropriate for the communication protocol and frequency + * selected. Selecting too high of an Output Data Rate with a low + * communication speed will result in samples being discarded. + */ + + u8 data_rate; + + /* + * data_range: + * FULL_RES: When this bit is set with the device is + * in Full-Resolution Mode, where the output resolution increases + * with RANGE to maintain a 4 mg/LSB scale factor. When this + * bit is cleared the device is in 10-bit Mode and RANGE determine the + * maximum g-Range and scale factor. + */ + +#define ADXL_FULL_RES (1 << 3) +#define ADXL_RANGE_PM_2g 0 +#define ADXL_RANGE_PM_4g 1 +#define ADXL_RANGE_PM_8g 2 +#define ADXL_RANGE_PM_16g 3 + + u8 data_range; + + /* + * low_power_mode: + * A '0' = Normal operation and a '1' = Reduced + * power operation with somewhat higher noise. + */ + + u8 low_power_mode; + + /* + * power_mode: + * LINK: A '1' with both the activity and inactivity functions + * enabled will delay the start of the activity function until + * inactivity is detected. Once activity is detected, inactivity + * detection will begin and prevent the detection of activity. This + * bit serially links the activity and inactivity functions. When '0' + * the inactivity and activity functions are concurrent. Additional + * information can be found in the Application section under Link + * Mode. + * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode + * when inactivity (acceleration has been below inactivity_threshold + * for at least inactivity_time) is detected and the LINK bit is set. + * A '0' disables automatic switching to Sleep Mode. See SLEEP + * for further description. + */ + +#define ADXL_LINK (1 << 5) +#define ADXL_AUTO_SLEEP (1 << 4) + + u8 power_mode; + + /* + * fifo_mode: + * BYPASS The FIFO is bypassed + * FIFO FIFO collects up to 32 values then stops collecting data + * STREAM FIFO holds the last 32 data values. Once full, the FIFO's + * oldest data is lost as it is replaced with newer data + * + * DEFAULT should be ADXL_FIFO_STREAM + */ + +#define ADXL_FIFO_BYPASS 0 +#define ADXL_FIFO_FIFO 1 +#define ADXL_FIFO_STREAM 2 + + u8 fifo_mode; + + /* + * watermark: + * The Watermark feature can be used to reduce the interrupt load + * of the system. The FIFO fills up to the value stored in watermark + * [1..32] and then generates an interrupt. + * A '0' disables the watermark feature. + */ + + u8 watermark; + + u32 ev_type; /* EV_ABS or EV_REL */ + + u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ + u32 ev_code_y; /* ABS_X,Y,Z or REL_X,Y,Z */ + u32 ev_code_z; /* ABS_X,Y,Z or REL_X,Y,Z */ + + /* + * A valid BTN or KEY Code; use tap_axis_control to disable + * event reporting + */ + + u32 ev_code_tap[3]; /* EV_KEY {X-Axis, Y-Axis, Z-Axis} */ + + /* + * A valid BTN or KEY Code for Free-Fall or Activity enables + * input event reporting. A '0' disables the Free-Fall or + * Activity reporting. + */ + + u32 ev_code_ff; /* EV_KEY */ + u32 ev_code_act_inactivity; /* EV_KEY */ + + u8 use_int2; +}; +#endif -- cgit v1.2.3-18-g5258 From 671386bb23c57e5448f386a41101ed65ad1d488c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 25 Jun 2010 08:44:10 -0700 Subject: Input: adxl34x - add support for ADXL346 orientation sensing Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- include/linux/input/adxl34x.h | 56 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'include') diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index 71211823803..df00d998a44 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -288,6 +288,62 @@ struct adxl34x_platform_data { u32 ev_code_ff; /* EV_KEY */ u32 ev_code_act_inactivity; /* EV_KEY */ + /* + * Use ADXL34x INT2 instead of INT1 + */ u8 use_int2; + + /* + * ADXL346 only ORIENTATION SENSING feature + * The orientation function of the ADXL346 reports both 2-D and + * 3-D orientation concurrently. + */ + +#define ADXL_EN_ORIENTATION_2D 1 +#define ADXL_EN_ORIENTATION_3D 2 +#define ADXL_EN_ORIENTATION_2D_3D 3 + + u8 orientation_enable; + + /* + * The width of the deadzone region between two or more + * orientation positions is determined by setting the Deadzone + * value. The deadzone region size can be specified with a + * resolution of 3.6deg. The deadzone angle represents the total + * angle where the orientation is considered invalid. + */ + +#define ADXL_DEADZONE_ANGLE_0p0 0 /* !!!0.0 [deg] */ +#define ADXL_DEADZONE_ANGLE_3p6 1 /* 3.6 [deg] */ +#define ADXL_DEADZONE_ANGLE_7p2 2 /* 7.2 [deg] */ +#define ADXL_DEADZONE_ANGLE_10p8 3 /* 10.8 [deg] */ +#define ADXL_DEADZONE_ANGLE_14p4 4 /* 14.4 [deg] */ +#define ADXL_DEADZONE_ANGLE_18p0 5 /* 18.0 [deg] */ +#define ADXL_DEADZONE_ANGLE_21p6 6 /* 21.6 [deg] */ +#define ADXL_DEADZONE_ANGLE_25p2 7 /* 25.2 [deg] */ + + u8 deadzone_angle; + + /* + * To eliminate most human motion such as walking or shaking, + * a Divisor value should be selected to effectively limit the + * orientation bandwidth. Set the depth of the filter used to + * low-pass filter the measured acceleration for stable + * orientation sensing + */ + +#define ADXL_LP_FILTER_DIVISOR_2 0 +#define ADXL_LP_FILTER_DIVISOR_4 1 +#define ADXL_LP_FILTER_DIVISOR_8 2 +#define ADXL_LP_FILTER_DIVISOR_16 3 +#define ADXL_LP_FILTER_DIVISOR_32 4 +#define ADXL_LP_FILTER_DIVISOR_64 5 +#define ADXL_LP_FILTER_DIVISOR_128 6 +#define ADXL_LP_FILTER_DIVISOR_256 7 + + u8 divisor_length; + + u32 ev_codes_orient_2d[4]; /* EV_KEY {+X, -X, +Y, -Y} */ + u32 ev_codes_orient_3d[6]; /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ }; #endif -- cgit v1.2.3-18-g5258 From 7804302b14032d357d889e4a23e463eb6a6c5136 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 28 Jun 2010 01:25:19 -0700 Subject: Input: ads7846 - allow specifying irq trigger type in platform data On some platforms, for example with GPIO interrupts on mpc5121, it is not possible to configure falling edge interrupts. Specifying irq trigger type in platform data structure allows using ads7846 driver on such platforms. Signed-off-by: Anatolij Gustschin Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index b4ae570d3c9..95d36bfb34b 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -54,5 +54,6 @@ struct ads7846_platform_data { void (*filter_cleanup)(void *filter_data); void (*wait_for_sync)(void); bool wakeup; + unsigned long irq_flags; }; -- cgit v1.2.3-18-g5258 From 0f622bf465e78c390e13c5f4a14d0b3f8fb7c7e5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 1 Jul 2010 09:01:50 -0700 Subject: Input: ads7846 - do not allow altering platform data Tested-by: Anatolij Gustschin Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 95d36bfb34b..92bd0839d5b 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -48,7 +48,7 @@ struct ads7846_platform_data { * state if get_pendown_state == NULL */ int (*get_pendown_state)(void); - int (*filter_init) (struct ads7846_platform_data *pdata, + int (*filter_init) (const struct ads7846_platform_data *pdata, void **filter_data); int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); -- cgit v1.2.3-18-g5258 From 312e8e8a9e2471b0ada7366497fffb3ff1a40e2c Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Sun, 4 Jul 2010 01:21:25 -0700 Subject: Input: mcs - Add MCS touchkey driver This adds support for MELPAS MCS5000/MSC5080 touch key controllers. Signed-off-by: Joonyoung Shim Signed-off-by: Dmitry Torokhov --- include/linux/i2c/mcs.h | 34 ++++++++++++++++++++++++++++++++++ include/linux/i2c/mcs5000_ts.h | 24 ------------------------ 2 files changed, 34 insertions(+), 24 deletions(-) create mode 100644 include/linux/i2c/mcs.h delete mode 100644 include/linux/i2c/mcs5000_ts.h (limited to 'include') diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h new file mode 100644 index 00000000000..725ae7c313f --- /dev/null +++ b/include/linux/i2c/mcs.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * Author: HeungJun Kim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MCS_H +#define __LINUX_MCS_H + +#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) +#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) +#define MCS_KEY_CODE(v) ((v) & 0xffff) + +struct mcs_platform_data { + void (*cfg_pin)(void); + + /* touchscreen */ + unsigned int x_size; + unsigned int y_size; + + /* touchkey */ + const u32 *keymap; + unsigned int keymap_size; + unsigned int key_maxval; + bool no_autorepeat; +}; + +#endif /* __LINUX_MCS_H */ diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h deleted file mode 100644 index 5a117b5ca15..00000000000 --- a/include/linux/i2c/mcs5000_ts.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * mcs5000_ts.h - * - * Copyright (C) 2009 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MCS5000_TS_H -#define __LINUX_MCS5000_TS_H - -/* platform data for the MELFAS MCS-5000 touchscreen driver */ -struct mcs5000_ts_platform_data { - void (*cfg_pin)(void); - int x_size; - int y_size; -}; - -#endif /* __LINUX_MCS5000_TS_H */ -- cgit v1.2.3-18-g5258 From 4cf51c383d7a8d472a6090a0d19c371d40e823c9 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 14 Jul 2010 21:55:30 -0700 Subject: Input: Add ATMEL QT602240 touchscreen driver The chip's full name is AT42QT602240 or ATMXT224. This is a capacitive touchscreen supporting 10-contact multitouch and using I2C interface. Signed-off-by: Joonyoung Shim Acked-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/i2c/qt602240_ts.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 include/linux/i2c/qt602240_ts.h (limited to 'include') diff --git a/include/linux/i2c/qt602240_ts.h b/include/linux/i2c/qt602240_ts.h new file mode 100644 index 00000000000..c5033e10109 --- /dev/null +++ b/include/linux/i2c/qt602240_ts.h @@ -0,0 +1,38 @@ +/* + * AT42QT602240/ATMXT224 Touchscreen driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_QT602240_TS_H +#define __LINUX_QT602240_TS_H + +/* Orient */ +#define QT602240_NORMAL 0x0 +#define QT602240_DIAGONAL 0x1 +#define QT602240_HORIZONTAL_FLIP 0x2 +#define QT602240_ROTATED_90_COUNTER 0x3 +#define QT602240_VERTICAL_FLIP 0x4 +#define QT602240_ROTATED_90 0x5 +#define QT602240_ROTATED_180 0x6 +#define QT602240_DIAGONAL_COUNTER 0x7 + +/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */ +struct qt602240_platform_data { + unsigned int x_line; + unsigned int y_line; + unsigned int x_size; + unsigned int y_size; + unsigned int blen; + unsigned int threshold; + unsigned int voltage; + unsigned char orient; +}; + +#endif /* __LINUX_QT602240_TS_H */ -- cgit v1.2.3-18-g5258 From 40d007e7df1dab17bf1ecf91e718218354d963d7 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 15 Jul 2010 23:10:10 -0700 Subject: Input: introduce MT event slots With the rapidly increasing number of intelligent multi-contact and multi-user devices, the need to send digested, filtered information from a set of different sources within the same device is imminent. This patch adds the concept of slots to the MT protocol. The slots enumerate a set of identified sources, such that all MT events can be passed independently and selectively per identified source. The protocol works like this: Instead of sending a SYN_MT_REPORT event immediately after the contact data, one sends an ABS_MT_SLOT event immediately before the contact data. The input core will only emit events for slots with modified MT events. It is assumed that the same slot is used for the duration of an initiated contact. Acked-by: Ping Cheng Acked-by: Chase Douglas Acked-by: Rafi Rubin Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index cc524c8b670..a14de64ed16 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -691,9 +691,12 @@ struct input_absinfo { #define ABS_TILT_X 0x1a #define ABS_TILT_Y 0x1b #define ABS_TOOL_WIDTH 0x1c + #define ABS_VOLUME 0x20 + #define ABS_MISC 0x28 +#define ABS_MT_SLOT 0x2f /* MT slot being modified */ #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ #define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ @@ -706,6 +709,12 @@ struct input_absinfo { #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#ifdef __KERNEL__ +/* Implementation details, userspace should not care about these */ +#define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR +#define ABS_MT_LAST ABS_MT_PRESSURE +#endif + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -1047,6 +1056,14 @@ struct ff_effect { #include #include +/** + * struct input_mt_slot - represents the state of an input MT slot + * @abs: holds current values of ABS_MT axes for this slot + */ +struct input_mt_slot { + int abs[ABS_MT_LAST - ABS_MT_FIRST + 1]; +}; + /** * struct input_dev - represents an input device * @name: name of the device @@ -1085,6 +1102,10 @@ struct ff_effect { * @sync: set to 1 when there were no new events since last EV_SYNC * @abs: current values for reports from absolute axes * @rep: current values for autorepeat parameters (delay, rate) + * @mt: pointer to array of struct input_mt_slot holding current values + * of tracked contacts + * @mtsize: number of MT slots the device uses + * @slot: MT slot currently being transmitted * @key: reflects current state of device's keys/buttons * @led: reflects current state of device's LEDs * @snd: reflects current state of sound effects @@ -1164,6 +1185,10 @@ struct input_dev { int abs[ABS_CNT]; int rep[REP_MAX + 1]; + struct input_mt_slot *mt; + int mtsize; + int slot; + unsigned long key[BITS_TO_LONGS(KEY_CNT)]; unsigned long led[BITS_TO_LONGS(LED_CNT)]; unsigned long snd[BITS_TO_LONGS(SND_CNT)]; @@ -1412,6 +1437,11 @@ static inline void input_mt_sync(struct input_dev *dev) input_event(dev, EV_SYN, SYN_MT_REPORT, 0); } +static inline void input_mt_slot(struct input_dev *dev, int slot) +{ + input_event(dev, EV_ABS, ABS_MT_SLOT, slot); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); /** @@ -1506,5 +1536,8 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file); int input_ff_create_memless(struct input_dev *dev, void *data, int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); +int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots); +void input_mt_destroy_slots(struct input_dev *dev); + #endif #endif -- cgit v1.2.3-18-g5258 From 20da92de8ec3c1d4ba7e5aca322d38b6ce634932 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Jul 2010 23:27:36 -0700 Subject: Input: change input handlers to use bool when possible Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/input.h b/include/linux/input.h index a14de64ed16..339d043ccb5 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1099,7 +1099,6 @@ struct input_mt_slot { * @repeat_key: stores key code of the last key pressed; used to implement * software autorepeat * @timer: timer for software autorepeat - * @sync: set to 1 when there were no new events since last EV_SYNC * @abs: current values for reports from absolute axes * @rep: current values for autorepeat parameters (delay, rate) * @mt: pointer to array of struct input_mt_slot holding current values @@ -1144,6 +1143,7 @@ struct input_mt_slot { * last user closes the device * @going_away: marks devices that are in a middle of unregistering and * causes input_open_device*() fail with -ENODEV. + * @sync: set to %true when there were no new events since last EV_SYN * @dev: driver model's view of this device * @h_list: list of input handles associated with the device. When * accessing the list dev->mutex must be held @@ -1180,8 +1180,6 @@ struct input_dev { unsigned int repeat_key; struct timer_list timer; - int sync; - int abs[ABS_CNT]; int rep[REP_MAX + 1]; @@ -1213,6 +1211,8 @@ struct input_dev { unsigned int users; bool going_away; + bool sync; + struct device dev; struct list_head h_list; -- cgit v1.2.3-18-g5258 From ba9f507a1bea5ca2fc4a19e227c56b60fd5faca3 Mon Sep 17 00:00:00 2001 From: Xiaolong Chen Date: Mon, 26 Jul 2010 01:01:11 -0700 Subject: Input: adp5588-keys - export unused GPIO pins This patch allows exporting GPIO pins not used by the keypad itself to be accessible from elsewhere. Signed-off-by: Xiaolong Chen Signed-off-by: Yuanbo Ye Signed-off-by: Tao Hu Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- include/linux/i2c/adp5588.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h index b5f57c498e2..269181b8f62 100644 --- a/include/linux/i2c/adp5588.h +++ b/include/linux/i2c/adp5588.h @@ -123,6 +123,7 @@ struct adp5588_kpad_platform_data { unsigned short unlock_key2; /* Unlock Key 2 */ const struct adp5588_gpi_map *gpimap; unsigned short gpimapsize; + const struct adp5588_gpio_platform_data *gpio_data; }; struct adp5588_gpio_platform_data { -- cgit v1.2.3-18-g5258 From 60347c194acec7ff1b4291ac8e62a5345244c2ee Mon Sep 17 00:00:00 2001 From: Samuli Konttila Date: Fri, 30 Jul 2010 09:02:43 -0700 Subject: Input: cy8ctmg110 - capacitive touchscreen support Add support for the cy8ctmg110 capacitive touchscreen used on some embedded devices. (Some clean up by Alan Cox) Signed-off-by: Alan Cox Signed-off-by: Dmitry Torokhov --- include/linux/input/cy8ctmg110_pdata.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/input/cy8ctmg110_pdata.h (limited to 'include') diff --git a/include/linux/input/cy8ctmg110_pdata.h b/include/linux/input/cy8ctmg110_pdata.h new file mode 100644 index 00000000000..09522cb5991 --- /dev/null +++ b/include/linux/input/cy8ctmg110_pdata.h @@ -0,0 +1,10 @@ +#ifndef _LINUX_CY8CTMG110_PDATA_H +#define _LINUX_CY8CTMG110_PDATA_H + +struct cy8ctmg110_pdata +{ + int reset_pin; /* Reset pin is wired to this GPIO (optional) */ + int irq_pin; /* IRQ pin is wired to this GPIO */ +}; + +#endif -- cgit v1.2.3-18-g5258