From 559fb51ba7e66fe298b8355fabde1275b7def35f Mon Sep 17 00:00:00 2001 From: Scott Bardone Date: Thu, 23 Jun 2005 01:40:19 -0400 Subject: Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code. --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 63e89e47b8e..41e35a72b96 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2120,6 +2120,7 @@ #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -- cgit v1.2.3-18-g5258 From 241fc4367b3ca5d407b043599ed980304a70b91f Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:35:54 +0100 Subject: [SERIAL] Expose 8250_pci setup/removal/suspend/resume functions Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they know slightly less about how they're attached to a PCI device. Expose this as the new interface for registering PCI serial ports, as well as the pciserial_board structure and associated flag definitions. Signed-off-by: Russell King --- include/linux/8250_pci.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include') diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h index 5f3ab21b339..192c0ff7a77 100644 --- a/include/linux/8250_pci.h +++ b/include/linux/8250_pci.h @@ -1,2 +1,40 @@ +/* + * Definitions for PCI support. + */ +#define FL_BASE_MASK 0x0007 +#define FL_BASE0 0x0000 +#define FL_BASE1 0x0001 +#define FL_BASE2 0x0002 +#define FL_BASE3 0x0003 +#define FL_BASE4 0x0004 +#define FL_GET_BASE(x) (x & FL_BASE_MASK) + +/* Use successive BARs (PCI base address registers), + else use offset into some specified BAR */ +#define FL_BASE_BARS 0x0008 + +/* do not assign an irq */ +#define FL_NOIRQ 0x0080 + +/* Use the Base address register size to cap number of ports */ +#define FL_REGION_SZ_CAP 0x0100 + +struct pciserial_board { + unsigned int flags; + unsigned int num_ports; + unsigned int base_baud; + unsigned int uart_offset; + unsigned int reg_shift; + unsigned int first_offset; +}; + +struct serial_private; + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board); +void pciserial_remove_ports(struct serial_private *priv); +void pciserial_suspend_ports(struct serial_private *priv); +void pciserial_resume_ports(struct serial_private *priv); + int pci_siig10x_fn(struct pci_dev *dev, int enable); int pci_siig20x_fn(struct pci_dev *dev, int enable); -- cgit v1.2.3-18-g5258 From 05caac585f8abd6c0113856bc8858e3ef214d8a6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Jul 2005 11:41:18 +0100 Subject: [SERIAL] Convert parport_serial to use new 8250_pci interfaces Convert parport_serial to use the new 8250_pci interface, converting the table to a pciserial_board table. This also unuses the SPCI_* definitions in serialP.h, which can now be removed. Signed-off-by: Russell King --- include/linux/8250_pci.h | 3 --- include/linux/serialP.h | 40 ---------------------------------------- 2 files changed, 43 deletions(-) (limited to 'include') diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h index 192c0ff7a77..3209dd46ea7 100644 --- a/include/linux/8250_pci.h +++ b/include/linux/8250_pci.h @@ -35,6 +35,3 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board); void pciserial_remove_ports(struct serial_private *priv); void pciserial_suspend_ports(struct serial_private *priv); void pciserial_resume_ports(struct serial_private *priv); - -int pci_siig10x_fn(struct pci_dev *dev, int enable); -int pci_siig20x_fn(struct pci_dev *dev, int enable); diff --git a/include/linux/serialP.h b/include/linux/serialP.h index 2b2f35a64d7..2b9e6b9554d 100644 --- a/include/linux/serialP.h +++ b/include/linux/serialP.h @@ -140,44 +140,4 @@ struct rs_multiport_struct { #define ALPHA_KLUDGE_MCR 0 #endif -/* - * Definitions for PCI support. - */ -#define SPCI_FL_BASE_MASK 0x0007 -#define SPCI_FL_BASE0 0x0000 -#define SPCI_FL_BASE1 0x0001 -#define SPCI_FL_BASE2 0x0002 -#define SPCI_FL_BASE3 0x0003 -#define SPCI_FL_BASE4 0x0004 -#define SPCI_FL_GET_BASE(x) (x & SPCI_FL_BASE_MASK) - -#define SPCI_FL_IRQ_MASK (0x0007 << 4) -#define SPCI_FL_IRQBASE0 (0x0000 << 4) -#define SPCI_FL_IRQBASE1 (0x0001 << 4) -#define SPCI_FL_IRQBASE2 (0x0002 << 4) -#define SPCI_FL_IRQBASE3 (0x0003 << 4) -#define SPCI_FL_IRQBASE4 (0x0004 << 4) -#define SPCI_FL_GET_IRQBASE(x) ((x & SPCI_FL_IRQ_MASK) >> 4) - -/* Use successive BARs (PCI base address registers), - else use offset into some specified BAR */ -#define SPCI_FL_BASE_TABLE 0x0100 - -/* Use successive entries in the irq resource table */ -#define SPCI_FL_IRQ_TABLE 0x0200 - -/* Use the irq resource table instead of dev->irq */ -#define SPCI_FL_IRQRESOURCE 0x0400 - -/* Use the Base address register size to cap number of ports */ -#define SPCI_FL_REGION_SZ_CAP 0x0800 - -/* Do not use irq sharing for this device */ -#define SPCI_FL_NO_SHIRQ 0x1000 - -/* This is a PNP device */ -#define SPCI_FL_ISPNP 0x2000 - -#define SPCI_FL_PNPDEFAULT (SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP) - #endif /* _LINUX_SERIAL_H */ -- cgit v1.2.3-18-g5258 From 00db8189d984d6c51226dafbbe4a667ce9b7d5da Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sat, 30 Jul 2005 19:31:23 -0400 Subject: This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- include/linux/ethtool.h | 4 + include/linux/mii.h | 9 +- include/linux/phy.h | 378 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 390 insertions(+), 1 deletion(-) create mode 100644 include/linux/phy.h (limited to 'include') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index a0ab26aab45..d7021c391b2 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -408,6 +408,8 @@ struct ethtool_ops { #define SUPPORTED_FIBRE (1 << 10) #define SUPPORTED_BNC (1 << 11) #define SUPPORTED_10000baseT_Full (1 << 12) +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -423,6 +425,8 @@ struct ethtool_ops { #define ADVERTISED_FIBRE (1 << 10) #define ADVERTISED_BNC (1 << 11) #define ADVERTISED_10000baseT_Full (1 << 12) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the diff --git a/include/linux/mii.h b/include/linux/mii.h index 374b615ea9e..9b8d0476988 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -22,6 +22,7 @@ #define MII_EXPANSION 0x06 /* Expansion register */ #define MII_CTRL1000 0x09 /* 1000BASE-T control */ #define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_ESTATUS 0x0f /* Extended Status */ #define MII_DCOUNTER 0x12 /* Disconnect counter */ #define MII_FCSCOUNTER 0x13 /* False carrier counter */ #define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ @@ -54,7 +55,10 @@ #define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ #define BMSR_RFAULT 0x0010 /* Remote fault detected */ #define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x07c0 /* Unused... */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100FULL2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100HALF2 0x0400 /* Can do 100BASE-T2 FDX */ #define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ #define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ #define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ @@ -114,6 +118,9 @@ #define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ #define EXPANSION_RESV 0xffe0 /* Unused... */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + /* N-way test register. */ #define NWAYTEST_RESV1 0x00ff /* Unused... */ #define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ diff --git a/include/linux/phy.h b/include/linux/phy.h new file mode 100644 index 00000000000..3404804dc22 --- /dev/null +++ b/include/linux/phy.h @@ -0,0 +1,378 @@ +/* + * include/linux/phy.h + * + * Framework and drivers for configuring and reading different PHYs + * Based on code in sungem_phy.c and gianfar_phy.c + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __PHY_H +#define __PHY_H + +#include +#include + +#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +/* Set phydev->irq to PHY_POLL if interrupts are not supported, + * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if + * the attached driver handles the interrupt + */ +#define PHY_POLL -1 +#define PHY_IGNORE_INTERRUPT -2 + +#define PHY_HAS_INTERRUPT 0x00000001 +#define PHY_HAS_MAGICANEG 0x00000002 + +#define MII_BUS_MAX 4 + + +#define PHY_INIT_TIMEOUT 100000 +#define PHY_STATE_TIME 1 +#define PHY_FORCE_TIMEOUT 10 +#define PHY_AN_TIMEOUT 10 + +#define PHY_MAX_ADDR 32 + +/* The Bus class for PHYs. Devices which provide access to + * PHYs should register using this structure */ +struct mii_bus { + const char *name; + int id; + void *priv; + int (*read)(struct mii_bus *bus, int phy_id, int regnum); + int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); + int (*reset)(struct mii_bus *bus); + + /* A lock to ensure that only one thing can read/write + * the MDIO bus at a time */ + spinlock_t mdio_lock; + + struct device *dev; + + /* list of all PHYs on bus */ + struct phy_device *phy_map[PHY_MAX_ADDR]; + + /* Pointer to an array of interrupts, each PHY's + * interrupt at the index matching its address */ + int *irq; +}; + +#define PHY_INTERRUPT_DISABLED 0x0 +#define PHY_INTERRUPT_ENABLED 0x80000000 + +/* PHY state machine states: + * + * DOWN: PHY device and driver are not ready for anything. probe + * should be called if and only if the PHY is in this state, + * given that the PHY device exists. + * - PHY driver probe function will, depending on the PHY, set + * the state to STARTING or READY + * + * STARTING: PHY device is coming up, and the ethernet driver is + * not ready. PHY drivers may set this in the probe function. + * If they do, they are responsible for making sure the state is + * eventually set to indicate whether the PHY is UP or READY, + * depending on the state when the PHY is done starting up. + * - PHY driver will set the state to READY + * - start will set the state to PENDING + * + * READY: PHY is ready to send and receive packets, but the + * controller is not. By default, PHYs which do not implement + * probe will be set to this state by phy_probe(). If the PHY + * driver knows the PHY is ready, and the PHY state is STARTING, + * then it sets this STATE. + * - start will set the state to UP + * + * PENDING: PHY device is coming up, but the ethernet driver is + * ready. phy_start will set this state if the PHY state is + * STARTING. + * - PHY driver will set the state to UP when the PHY is ready + * + * UP: The PHY and attached device are ready to do work. + * Interrupts should be started here. + * - timer moves to AN + * + * AN: The PHY is currently negotiating the link state. Link is + * therefore down for now. phy_timer will set this state when it + * detects the state is UP. config_aneg will set this state + * whenever called with phydev->autoneg set to AUTONEG_ENABLE. + * - If autonegotiation finishes, but there's no link, it sets + * the state to NOLINK. + * - If aneg finishes with link, it sets the state to RUNNING, + * and calls adjust_link + * - If autonegotiation did not finish after an arbitrary amount + * of time, autonegotiation should be tried again if the PHY + * supports "magic" autonegotiation (back to AN) + * - If it didn't finish, and no magic_aneg, move to FORCING. + * + * NOLINK: PHY is up, but not currently plugged in. + * - If the timer notes that the link comes back, we move to RUNNING + * - config_aneg moves to AN + * - phy_stop moves to HALTED + * + * FORCING: PHY is being configured with forced settings + * - if link is up, move to RUNNING + * - If link is down, we drop to the next highest setting, and + * retry (FORCING) after a timeout + * - phy_stop moves to HALTED + * + * RUNNING: PHY is currently up, running, and possibly sending + * and/or receiving packets + * - timer will set CHANGELINK if we're polling (this ensures the + * link state is polled every other cycle of this state machine, + * which makes it every other second) + * - irq will set CHANGELINK + * - config_aneg will set AN + * - phy_stop moves to HALTED + * + * CHANGELINK: PHY experienced a change in link state + * - timer moves to RUNNING if link + * - timer moves to NOLINK if the link is down + * - phy_stop moves to HALTED + * + * HALTED: PHY is up, but no polling or interrupts are done. Or + * PHY is in an error state. + * + * - phy_start moves to RESUMING + * + * RESUMING: PHY was halted, but now wants to run again. + * - If we are forcing, or aneg is done, timer moves to RUNNING + * - If aneg is not done, timer moves to AN + * - phy_stop moves to HALTED + */ +enum phy_state { + PHY_DOWN=0, + PHY_STARTING, + PHY_READY, + PHY_PENDING, + PHY_UP, + PHY_AN, + PHY_RUNNING, + PHY_NOLINK, + PHY_FORCING, + PHY_CHANGELINK, + PHY_HALTED, + PHY_RESUMING +}; + +/* phy_device: An instance of a PHY + * + * drv: Pointer to the driver for this PHY instance + * bus: Pointer to the bus this PHY is on + * dev: driver model device structure for this PHY + * phy_id: UID for this device found during discovery + * state: state of the PHY for management purposes + * dev_flags: Device-specific flags used by the PHY driver. + * addr: Bus address of PHY + * link_timeout: The number of timer firings to wait before the + * giving up on the current attempt at acquiring a link + * irq: IRQ number of the PHY's interrupt (-1 if none) + * phy_timer: The timer for handling the state machine + * phy_queue: A work_queue for the interrupt + * attached_dev: The attached enet driver's device instance ptr + * adjust_link: Callback for the enet controller to respond to + * changes in the link state. + * adjust_state: Callback for the enet driver to respond to + * changes in the state machine. + * + * speed, duplex, pause, supported, advertising, and + * autoneg are used like in mii_if_info + * + * interrupts currently only supports enabled or disabled, + * but could be changed in the future to support enabling + * and disabling specific interrupts + * + * Contains some infrastructure for polling and interrupt + * handling, as well as handling shifts in PHY hardware state + */ +struct phy_device { + /* Information about the PHY type */ + /* And management functions */ + struct phy_driver *drv; + + struct mii_bus *bus; + + struct device dev; + + u32 phy_id; + + enum phy_state state; + + u32 dev_flags; + + /* Bus address of the PHY (0-32) */ + int addr; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + int asym_pause; + + /* The most recently read link state */ + int link; + + /* Enabled Interrupts */ + u32 interrupts; + + /* Union of PHY and Attached devices' supported modes */ + /* See mii.h for more info */ + u32 supported; + u32 advertising; + + int autoneg; + + int link_timeout; + + /* Interrupt number for this PHY + * -1 means no interrupt */ + int irq; + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + /* Interrupt and Polling infrastructure */ + struct work_struct phy_queue; + struct timer_list phy_timer; + + spinlock_t lock; + + struct net_device *attached_dev; + + void (*adjust_link)(struct net_device *dev); + + void (*adjust_state)(struct net_device *dev); +}; +#define to_phy_device(d) container_of(d, struct phy_device, dev) + +/* struct phy_driver: Driver structure for a particular PHY type + * + * phy_id: The result of reading the UID registers of this PHY + * type, and ANDing them with the phy_id_mask. This driver + * only works for PHYs with IDs which match this field + * name: The friendly name of this PHY type + * phy_id_mask: Defines the important bits of the phy_id + * features: A list of features (speed, duplex, etc) supported + * by this PHY + * flags: A bitfield defining certain other features this PHY + * supports (like interrupts) + * + * The drivers must implement config_aneg and read_status. All + * other functions are optional. Note that none of these + * functions should be called from interrupt time. The goal is + * for the bus read/write functions to be able to block when the + * bus transaction is happening, and be freed up by an interrupt + * (The MPC85xx has this ability, though it is not currently + * supported in the driver). + */ +struct phy_driver { + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; + u32 flags; + + /* Called to initialize the PHY, + * including after a reset */ + int (*config_init)(struct phy_device *phydev); + + /* Called during discovery. Used to set + * up device-specific structures, if any */ + int (*probe)(struct phy_device *phydev); + + /* PHY Power Management */ + int (*suspend)(struct phy_device *phydev); + int (*resume)(struct phy_device *phydev); + + /* Configures the advertisement and resets + * autonegotiation if phydev->autoneg is on, + * forces the speed to the current settings in phydev + * if phydev->autoneg is off */ + int (*config_aneg)(struct phy_device *phydev); + + /* Determines the negotiated speed and duplex */ + int (*read_status)(struct phy_device *phydev); + + /* Clears any pending interrupts */ + int (*ack_interrupt)(struct phy_device *phydev); + + /* Enables or disables interrupts */ + int (*config_intr)(struct phy_device *phydev); + + /* Clears up any memory if needed */ + void (*remove)(struct phy_device *phydev); + + struct device_driver driver; +}; +#define to_phy_driver(d) container_of(d, struct phy_driver, driver) + +int phy_read(struct phy_device *phydev, u16 regnum); +int phy_write(struct phy_device *phydev, u16 regnum, u16 val); +struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +int phy_clear_interrupt(struct phy_device *phydev); +int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); +struct phy_device * phy_attach(struct net_device *dev, + const char *phy_id, u32 flags); +struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, + void (*handler)(struct net_device *), u32 flags); +void phy_disconnect(struct phy_device *phydev); +void phy_detach(struct phy_device *phydev); +void phy_start(struct phy_device *phydev); +void phy_stop(struct phy_device *phydev); +int phy_start_aneg(struct phy_device *phydev); + +int mdiobus_register(struct mii_bus *bus); +void mdiobus_unregister(struct mii_bus *bus); +void phy_sanitize_settings(struct phy_device *phydev); +int phy_stop_interrupts(struct phy_device *phydev); + +static inline int phy_read_status(struct phy_device *phydev) { + return phydev->drv->read_status(phydev); +} + +int genphy_config_advert(struct phy_device *phydev); +int genphy_setup_forced(struct phy_device *phydev); +int genphy_restart_aneg(struct phy_device *phydev); +int genphy_config_aneg(struct phy_device *phydev); +int genphy_update_link(struct phy_device *phydev); +int genphy_read_status(struct phy_device *phydev); +void phy_driver_unregister(struct phy_driver *drv); +int phy_driver_register(struct phy_driver *new_driver); +void phy_prepare_link(struct phy_device *phydev, + void (*adjust_link)(struct net_device *)); +void phy_start_machine(struct phy_device *phydev, + void (*handler)(struct net_device *)); +void phy_stop_machine(struct phy_device *phydev); +int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); +int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); +int phy_mii_ioctl(struct phy_device *phydev, + struct mii_ioctl_data *mii_data, int cmd); +int phy_start_interrupts(struct phy_device *phydev); +void phy_print_status(struct phy_device *phydev); + +extern struct bus_type mdio_bus_type; +extern struct phy_driver genphy_driver; +#endif /* __PHY_H */ -- cgit v1.2.3-18-g5258 From 541134cfe7af179f45458b68421ee1da7bab9cba Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sun, 3 Jul 2005 13:44:39 +0100 Subject: [PATCH] sata_nv: Support MCP51/MCP55 device IDs This is a multi-part message in MIME format. Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index bc4cc10fabe..639291fe8ac 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1249,6 +1249,7 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E +#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x036F #define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 #define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 #define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B -- cgit v1.2.3-18-g5258 From 8a60a07129fad60bba779a2a4038c7518b167fc7 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 31 Jul 2005 13:13:24 -0400 Subject: libata: trim trailing whitespace. Also, fixup a tabs-to-spaces block of code in ata_piix. --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 6cd9ba63563..85b0aaee0ef 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -644,7 +644,7 @@ static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val) ap->ops->scr_write(ap, reg, val); } -static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, +static inline void scr_write_flush(struct ata_port *ap, unsigned int reg, u32 val) { ap->ops->scr_write(ap, reg, val); -- cgit v1.2.3-18-g5258 From 67c4f3fa25502ce7ed82fb0307e09cf36f1f81da Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 11 Aug 2005 02:07:25 -0400 Subject: Fix numerous minor problems with new phy subsystem. Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders). --- include/linux/phy.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/phy.h b/include/linux/phy.h index 3404804dc22..72cb67b66e0 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -374,5 +374,4 @@ int phy_start_interrupts(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); extern struct bus_type mdio_bus_type; -extern struct phy_driver genphy_driver; #endif /* __PHY_H */ -- cgit v1.2.3-18-g5258 From 2bf69b5fe90b3246ab50064c5a690a363e8c53e2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 11 Aug 2005 02:47:54 -0400 Subject: phy subsystem: more cleanups - unexport symbols never used outside of home module - remove dead code - remove CONFIG_PHYCONTROL, make it unconditionally enabled --- include/linux/phy.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include') diff --git a/include/linux/phy.h b/include/linux/phy.h index 72cb67b66e0..4f2b5effc16 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -334,26 +334,11 @@ int phy_write(struct phy_device *phydev, u16 regnum, u16 val); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); -struct phy_device * phy_attach(struct net_device *dev, - const char *phy_id, u32 flags); -struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, - void (*handler)(struct net_device *), u32 flags); -void phy_disconnect(struct phy_device *phydev); -void phy_detach(struct phy_device *phydev); -void phy_start(struct phy_device *phydev); -void phy_stop(struct phy_device *phydev); -int phy_start_aneg(struct phy_device *phydev); - -int mdiobus_register(struct mii_bus *bus); -void mdiobus_unregister(struct mii_bus *bus); -void phy_sanitize_settings(struct phy_device *phydev); -int phy_stop_interrupts(struct phy_device *phydev); static inline int phy_read_status(struct phy_device *phydev) { return phydev->drv->read_status(phydev); } -int genphy_config_advert(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_config_aneg(struct phy_device *phydev); @@ -370,8 +355,6 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); int phy_mii_ioctl(struct phy_device *phydev, struct mii_ioctl_data *mii_data, int cmd); -int phy_start_interrupts(struct phy_device *phydev); -void phy_print_status(struct phy_device *phydev); extern struct bus_type mdio_bus_type; #endif /* __PHY_H */ -- cgit v1.2.3-18-g5258 From 972dcafb6d743a6c7611a2e4681ed814e30d6230 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Thu, 11 Aug 2005 03:35:53 -0400 Subject: [libata scsi] add START STOP UNIT translation --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/ata.h b/include/linux/ata.h index ca5fcadf998..9d25e9886d6 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -108,6 +108,8 @@ enum { /* ATA device commands */ ATA_CMD_CHK_POWER = 0xE5, /* check power mode */ + ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */ + ATA_CMD_IDLE = 0xE3, /* place in idle power mode */ ATA_CMD_EDD = 0x90, /* execute device diagnostic */ ATA_CMD_FLUSH = 0xE7, ATA_CMD_FLUSH_EXT = 0xEA, -- cgit v1.2.3-18-g5258 From 323cdfc191b7c1597dc748175062c368568d6af4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:10:46 +0100 Subject: [MFD] Add SA11x0 MCP platform device support Add platform device data for the SA11x0 MCP device. This allows platforms to customise the configuration of the SA11x0 MCP device according to their needs. Signed-off-by: Russell King --- include/asm-arm/arch-sa1100/mcp.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/asm-arm/arch-sa1100/mcp.h (limited to 'include') diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h new file mode 100644 index 00000000000..f58a22755c6 --- /dev/null +++ b/include/asm-arm/arch-sa1100/mcp.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-sa1100/mcp.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ARCH_MCP_H +#define __ASM_ARM_ARCH_MCP_H + +#include + +struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; +}; + +#endif -- cgit v1.2.3-18-g5258 From f27ecacc54cc0e5397c9b35f6c25065f07c4448d Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 21:31:00 +0100 Subject: [ARM] Add support for ARM GIC Add support for the ARM Generic Interrupt Controller. Signed-off-by: Russell King --- include/asm-arm/hardware/gic.h | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 include/asm-arm/hardware/gic.h (limited to 'include') diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h new file mode 100644 index 00000000000..3fa5eb70f64 --- /dev/null +++ b/include/asm-arm/hardware/gic.h @@ -0,0 +1,41 @@ +/* + * linux/include/asm-arm/hardware/gic.h + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_HARDWARE_GIC_H +#define __ASM_ARM_HARDWARE_GIC_H + +#include + +#define GIC_CPU_CTRL 0x00 +#define GIC_CPU_PRIMASK 0x04 +#define GIC_CPU_BINPOINT 0x08 +#define GIC_CPU_INTACK 0x0c +#define GIC_CPU_EOI 0x10 +#define GIC_CPU_RUNNINGPRI 0x14 +#define GIC_CPU_HIGHPRI 0x18 + +#define GIC_DIST_CTRL 0x000 +#define GIC_DIST_CTR 0x004 +#define GIC_DIST_ENABLE_SET 0x100 +#define GIC_DIST_ENABLE_CLEAR 0x180 +#define GIC_DIST_PENDING_SET 0x200 +#define GIC_DIST_PENDING_CLEAR 0x280 +#define GIC_DIST_ACTIVE_BIT 0x300 +#define GIC_DIST_PRI 0x400 +#define GIC_DIST_TARGET 0x800 +#define GIC_DIST_CONFIG 0xc00 +#define GIC_DIST_SOFTINT 0xf00 + +#ifndef __ASSEMBLY__ +void gic_dist_init(void __iomem *base); +void gic_cpu_init(void __iomem *base); +void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +#endif + +#endif -- cgit v1.2.3-18-g5258 From d366b6436386875b1310ce8f70e3f9dea4647bac Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:40:08 +0100 Subject: [MMC] Add mmc_hostname() macro mmc_hostname() returns a pointer to the hostname for the mmc_host. Signed-off-by: Russell King --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index f90f674eb3b..30786230859 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -97,6 +97,7 @@ extern void mmc_free_host(struct mmc_host *); #define mmc_priv(x) ((void *)((x) + 1)) #define mmc_dev(x) ((x)->dev) +#define mmc_hostname(x) ((x)->host_name) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); -- cgit v1.2.3-18-g5258 From 00b137cfda5276b3d2c87d44236fe4c5ee68b405 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:41:24 +0100 Subject: [MMC] Add MMC class devices Create a mmc_host class to allow enumeration of MMC host controllers even though they have no card(s) inserted. Patch based on work by Pierre Ossman. Signed-off-by: Russell King --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 30786230859..a74a810a130 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -63,6 +63,7 @@ struct device; struct mmc_host { struct device *dev; + struct class_device class_dev; struct mmc_host_ops *ops; unsigned int f_min; unsigned int f_max; -- cgit v1.2.3-18-g5258 From 1ad434d7cf5f490c71cfbbb2fb91076c01c8704e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:42:21 +0100 Subject: [MMC] Use class device name for mmc host name There's no point in having the host name duplicated between the mmc_host structure and the encapsulated class device structure. Signed-off-by: Russell King --- include/linux/mmc/host.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index a74a810a130..113cc27865f 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -68,7 +68,6 @@ struct mmc_host { unsigned int f_min; unsigned int f_max; u32 ocr_avail; - char host_name[8]; /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ @@ -98,7 +97,7 @@ extern void mmc_free_host(struct mmc_host *); #define mmc_priv(x) ((void *)((x) + 1)) #define mmc_dev(x) ((x)->dev) -#define mmc_hostname(x) ((x)->host_name) +#define mmc_hostname(x) ((x)->class_dev.class_id) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); -- cgit v1.2.3-18-g5258 From dce773771834221817e2d359a7e07a618ba08807 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 19 Aug 2005 09:42:52 +0100 Subject: [MMC] Use an IDR for host name indicies Signed-off-by: Russell King --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 113cc27865f..9a0893f3249 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -64,6 +64,7 @@ struct device; struct mmc_host { struct device *dev; struct class_device class_dev; + int index; struct mmc_host_ops *ops; unsigned int f_min; unsigned int f_max; -- cgit v1.2.3-18-g5258 From c1389503710ef4b4e5d21bea284afde19e9619cf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 22 Aug 2005 14:59:24 +0900 Subject: [PATCH] fix atapi_packet_task vs. intr race (take 2) Interrupts from devices sharing the same IRQ could cause ata_host_intr to finish commands being processed by atapi_packet_task if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA protocol. This is because libata interrupt handler is unaware that interrupts are not expected during that period. This patch adds ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not expecting interrupts. Note that once proper HSM is implemented for interrupt-driven PIO, this should be merged into it and this flag will be removed. ahci.c is a different kind of beast, so it's left alone. * The following drivers use ata_qc_issue_prot and ata_interrupt, so changes in libata core will do. ata_piix sata_sil sata_svw sata_via sata_sis sata_uli * The following drivers use ata_qc_issue_prot and custom intr handler. They need this change to work correctly. sata_nv sata_vsc * The following drivers use custom issue function and intr handler. Currently all custom issue functions don't support ATAPI, so this change is irrelevant, updated for consistency and to avoid later mistakes. sata_promise sata_qstor sata_sx4 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 85b0aaee0ef..724b7d1c18e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -113,6 +113,8 @@ enum { ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */ ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */ ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */ + ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once + * proper HSM is in place. */ ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ -- cgit v1.2.3-18-g5258 From 40bb0c3ef52d872de348e10000eb5432a43a147d Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Wed, 24 Aug 2005 17:36:21 +0200 Subject: [PATCH] m68k: fix broken macros causing compile errors Add parens around macro parameters. Signed-off-by: Andreas Schwab Signed-off-by: Linus Torvalds --- include/asm-m68k/page.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h index 99a51670921..206313e2a81 100644 --- a/include/asm-m68k/page.h +++ b/include/asm-m68k/page.h @@ -138,13 +138,13 @@ extern unsigned long m68k_memoffset; #define __pa(vaddr) ((unsigned long)(vaddr)+m68k_memoffset) #define __va(paddr) ((void *)((unsigned long)(paddr)-m68k_memoffset)) #else -#define __pa(vaddr) virt_to_phys((void *)vaddr) -#define __va(paddr) phys_to_virt((unsigned long)paddr) +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) #endif #else /* !CONFIG_SUN3 */ /* This #define is a horrible hack to suppress lots of warnings. --m */ -#define __pa(x) ___pa((unsigned long)x) +#define __pa(x) ___pa((unsigned long)(x)) static inline unsigned long ___pa(unsigned long x) { if(x == 0) -- cgit v1.2.3-18-g5258 From b73fc89f6d1f84326e5e897ad249d00a9f218fd7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 26 Aug 2005 16:03:19 +0100 Subject: [PATCH] libata: regularize dma_start/stop arguments Needed for a few PATA drivers. Also fix up a wrong comment. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 724b7d1c18e..33f3ab4eb82 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -365,7 +365,7 @@ struct ata_port_operations { void (*host_stop) (struct ata_host_set *host_set); - void (*bmdma_stop) (struct ata_port *ap); + void (*bmdma_stop) (struct ata_queued_cmd *qc); u8 (*bmdma_status) (struct ata_port *ap); }; @@ -424,9 +424,10 @@ extern unsigned int ata_dev_classify(struct ata_taskfile *tf); extern void ata_dev_id_string(u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_dev_config(struct ata_port *ap, unsigned int i); +extern void ata_dev_set_protocol(struct ata_device *dev); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); -extern void ata_bmdma_stop(struct ata_port *ap); +extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat); -- cgit v1.2.3-18-g5258 From 32818c2eb6b83ea5065c89e0c3cf774abc4dc02b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 26 Aug 2005 18:34:07 -0700 Subject: [PATCH] ppc64: Fix issue with gcc 4.0 compiled kernels I recently had a BUG_ON() go off spuriously on a gcc 4.0 compiled kernel. It turns out gcc-4.0 was removing a sign extension while earlier gcc versions would not. Thinking this to be a compiler bug, I submitted a report: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=23422 It turns out we need to cast the input in order to tell gcc to sign extend it. Thanks to Andrew Pinski for his help on this bug. Signed-off-by: Anton Blanchard Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-ppc64/bug.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-ppc64/bug.h b/include/asm-ppc64/bug.h index 169868fa307..16017827886 100644 --- a/include/asm-ppc64/bug.h +++ b/include/asm-ppc64/bug.h @@ -43,8 +43,8 @@ struct bug_entry *find_bug(unsigned long bugaddr); ".section __bug_table,\"a\"\n\t" \ " .llong 1b,%1,%2,%3\n" \ ".previous" \ - : : "r" (x), "i" (__LINE__), "i" (__FILE__), \ - "i" (__FUNCTION__)); \ + : : "r" ((long long)(x)), "i" (__LINE__), \ + "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) #define WARN_ON(x) do { \ @@ -53,7 +53,8 @@ struct bug_entry *find_bug(unsigned long bugaddr); ".section __bug_table,\"a\"\n\t" \ " .llong 1b,%1,%2,%3\n" \ ".previous" \ - : : "r" (x), "i" (__LINE__ + BUG_WARNING_TRAP), \ + : : "r" ((long long)(x)), \ + "i" (__LINE__ + BUG_WARNING_TRAP), \ "i" (__FILE__), "i" (__FUNCTION__)); \ } while (0) -- cgit v1.2.3-18-g5258 From 485761bd6a72d33b3d4fa884927b2b0d983b701e Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 26 Aug 2005 18:34:10 -0700 Subject: [PATCH] x86_64: Tell VM about holes in nodes Some nodes can have large holes on x86-64. This fixes problems with the VM allowing too many dirty pages because it overestimates the number of available RAM in a node. In extreme cases you can end up with all RAM filled with dirty pages which can lead to deadlocks and other nasty behaviour. This patch just tells the VM about the known holes from e820. Reserved (like the kernel text or mem_map) is still not taken into account, but that should be only a few percent error now. Small detail is that the flat setup uses the NUMA free_area_init_node() now too because it offers more flexibility. (akpm: lotsa thanks to Martin for working this problem out) Cc: Martin Bligh Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-x86_64/e820.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h index 8e94edf0b98..e682edc24a6 100644 --- a/include/asm-x86_64/e820.h +++ b/include/asm-x86_64/e820.h @@ -51,6 +51,8 @@ extern int e820_mapped(unsigned long start, unsigned long end, unsigned type); extern void e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end); extern void e820_setup_gap(void); +extern unsigned long e820_hole_size(unsigned long start_pfn, + unsigned long end_pfn); extern void __init parse_memopt(char *p, char **end); -- cgit v1.2.3-18-g5258 From a4d61e84804f3b14cc35c5e2af768a07c0f64ef6 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 25 Aug 2005 13:40:04 -0700 Subject: [PATCH] IB: move include files to include/rdma Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier --- include/rdma/ib_cache.h | 105 +++ include/rdma/ib_cm.h | 568 ++++++++++++++++ include/rdma/ib_fmr_pool.h | 93 +++ include/rdma/ib_mad.h | 579 +++++++++++++++++ include/rdma/ib_pack.h | 245 +++++++ include/rdma/ib_sa.h | 373 +++++++++++ include/rdma/ib_smi.h | 94 +++ include/rdma/ib_user_cm.h | 328 ++++++++++ include/rdma/ib_user_mad.h | 137 ++++ include/rdma/ib_user_verbs.h | 422 ++++++++++++ include/rdma/ib_verbs.h | 1461 ++++++++++++++++++++++++++++++++++++++++++ 11 files changed, 4405 insertions(+) create mode 100644 include/rdma/ib_cache.h create mode 100644 include/rdma/ib_cm.h create mode 100644 include/rdma/ib_fmr_pool.h create mode 100644 include/rdma/ib_mad.h create mode 100644 include/rdma/ib_pack.h create mode 100644 include/rdma/ib_sa.h create mode 100644 include/rdma/ib_smi.h create mode 100644 include/rdma/ib_user_cm.h create mode 100644 include/rdma/ib_user_mad.h create mode 100644 include/rdma/ib_user_verbs.h create mode 100644 include/rdma/ib_verbs.h (limited to 'include') diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h new file mode 100644 index 00000000000..5bf9834f7dc --- /dev/null +++ b/include/rdma/ib_cache.h @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2004 Topspin Communications. All rights reserved. + * Copyright (c) 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id: ib_cache.h 1349 2004-12-16 21:09:43Z roland $ + */ + +#ifndef _IB_CACHE_H +#define _IB_CACHE_H + +#include + +/** + * ib_get_cached_gid - Returns a cached GID table entry + * @device: The device to query. + * @port_num: The port number of the device to query. + * @index: The index into the cached GID table to query. + * @gid: The GID value found at the specified index. + * + * ib_get_cached_gid() fetches the specified GID table entry stored in + * the local software cache. + */ +int ib_get_cached_gid(struct ib_device *device, + u8 port_num, + int index, + union ib_gid *gid); + +/** + * ib_find_cached_gid - Returns the port number and GID table index where + * a specified GID value occurs. + * @device: The device to query. + * @gid: The GID value to search for. + * @port_num: The port number of the device where the GID value was found. + * @index: The index into the cached GID table where the GID was found. This + * parameter may be NULL. + * + * ib_find_cached_gid() searches for the specified GID value in + * the local software cache. + */ +int ib_find_cached_gid(struct ib_device *device, + union ib_gid *gid, + u8 *port_num, + u16 *index); + +/** + * ib_get_cached_pkey - Returns a cached PKey table entry + * @device: The device to query. + * @port_num: The port number of the device to query. + * @index: The index into the cached PKey table to query. + * @pkey: The PKey value found at the specified index. + * + * ib_get_cached_pkey() fetches the specified PKey table entry stored in + * the local software cache. + */ +int ib_get_cached_pkey(struct ib_device *device_handle, + u8 port_num, + int index, + u16 *pkey); + +/** + * ib_find_cached_pkey - Returns the PKey table index where a specified + * PKey value occurs. + * @device: The device to query. + * @port_num: The port number of the device to search for the PKey. + * @pkey: The PKey value to search for. + * @index: The index into the cached PKey table where the PKey was found. + * + * ib_find_cached_pkey() searches the specified PKey table in + * the local software cache. + */ +int ib_find_cached_pkey(struct ib_device *device, + u8 port_num, + u16 pkey, + u16 *index); + +#endif /* _IB_CACHE_H */ diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h new file mode 100644 index 00000000000..77fe9039209 --- /dev/null +++ b/include/rdma/ib_cm.h @@ -0,0 +1,568 @@ +/* + * Copyright (c) 2004 Intel Corporation. All rights reserved. + * Copyright (c) 2004 Topspin Corporation. All rights reserved. + * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id: ib_cm.h 2730 2005-06-28 16:43:03Z sean.hefty $ + */ +#if !defined(IB_CM_H) +#define IB_CM_H + +#include +#include + +enum ib_cm_state { + IB_CM_IDLE, + IB_CM_LISTEN, + IB_CM_REQ_SENT, + IB_CM_REQ_RCVD, + IB_CM_MRA_REQ_SENT, + IB_CM_MRA_REQ_RCVD, + IB_CM_REP_SENT, + IB_CM_REP_RCVD, + IB_CM_MRA_REP_SENT, + IB_CM_MRA_REP_RCVD, + IB_CM_ESTABLISHED, + IB_CM_DREQ_SENT, + IB_CM_DREQ_RCVD, + IB_CM_TIMEWAIT, + IB_CM_SIDR_REQ_SENT, + IB_CM_SIDR_REQ_RCVD +}; + +enum ib_cm_lap_state { + IB_CM_LAP_IDLE, + IB_CM_LAP_SENT, + IB_CM_LAP_RCVD, + IB_CM_MRA_LAP_SENT, + IB_CM_MRA_LAP_RCVD, +}; + +enum ib_cm_event_type { + IB_CM_REQ_ERROR, + IB_CM_REQ_RECEIVED, + IB_CM_REP_ERROR, + IB_CM_REP_RECEIVED, + IB_CM_RTU_RECEIVED, + IB_CM_USER_ESTABLISHED, + IB_CM_DREQ_ERROR, + IB_CM_DREQ_RECEIVED, + IB_CM_DREP_RECEIVED, + IB_CM_TIMEWAIT_EXIT, + IB_CM_MRA_RECEIVED, + IB_CM_REJ_RECEIVED, + IB_CM_LAP_ERROR, + IB_CM_LAP_RECEIVED, + IB_CM_APR_RECEIVED, + IB_CM_SIDR_REQ_ERROR, + IB_CM_SIDR_REQ_RECEIVED, + IB_CM_SIDR_REP_RECEIVED +}; + +enum ib_cm_data_size { + IB_CM_REQ_PRIVATE_DATA_SIZE = 92, + IB_CM_MRA_PRIVATE_DATA_SIZE = 222, + IB_CM_REJ_PRIVATE_DATA_SIZE = 148, + IB_CM_REP_PRIVATE_DATA_SIZE = 196, + IB_CM_RTU_PRIVATE_DATA_SIZE = 224, + IB_CM_DREQ_PRIVATE_DATA_SIZE = 220, + IB_CM_DREP_PRIVATE_DATA_SIZE = 224, + IB_CM_REJ_ARI_LENGTH = 72, + IB_CM_LAP_PRIVATE_DATA_SIZE = 168, + IB_CM_APR_PRIVATE_DATA_SIZE = 148, + IB_CM_APR_INFO_LENGTH = 72, + IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216, + IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136, + IB_CM_SIDR_REP_INFO_LENGTH = 72 +}; + +struct ib_cm_id; + +struct ib_cm_req_event_param { + struct ib_cm_id *listen_id; + struct ib_device *device; + u8 port; + + struct ib_sa_path_rec *primary_path; + struct ib_sa_path_rec *alternate_path; + + __be64 remote_ca_guid; + u32 remote_qkey; + u32 remote_qpn; + enum ib_qp_type qp_type; + + u32 starting_psn; + u8 responder_resources; + u8 initiator_depth; + unsigned int local_cm_response_timeout:5; + unsigned int flow_control:1; + unsigned int remote_cm_response_timeout:5; + unsigned int retry_count:3; + unsigned int rnr_retry_count:3; + unsigned int srq:1; +}; + +struct ib_cm_rep_event_param { + __be64 remote_ca_guid; + u32 remote_qkey; + u32 remote_qpn; + u32 starting_psn; + u8 responder_resources; + u8 initiator_depth; + unsigned int target_ack_delay:5; + unsigned int failover_accepted:2; + unsigned int flow_control:1; + unsigned int rnr_retry_count:3; + unsigned int srq:1; +}; + +enum ib_cm_rej_reason { + IB_CM_REJ_NO_QP = 1, + IB_CM_REJ_NO_EEC = 2, + IB_CM_REJ_NO_RESOURCES = 3, + IB_CM_REJ_TIMEOUT = 4, + IB_CM_REJ_UNSUPPORTED = 5, + IB_CM_REJ_INVALID_COMM_ID = 6, + IB_CM_REJ_INVALID_COMM_INSTANCE = 7, + IB_CM_REJ_INVALID_SERVICE_ID = 8, + IB_CM_REJ_INVALID_TRANSPORT_TYPE = 9, + IB_CM_REJ_STALE_CONN = 10, + IB_CM_REJ_RDC_NOT_EXIST = 11, + IB_CM_REJ_INVALID_GID = 12, + IB_CM_REJ_INVALID_LID = 13, + IB_CM_REJ_INVALID_SL = 14, + IB_CM_REJ_INVALID_TRAFFIC_CLASS = 15, + IB_CM_REJ_INVALID_HOP_LIMIT = 16, + IB_CM_REJ_INVALID_PACKET_RATE = 17, + IB_CM_REJ_INVALID_ALT_GID = 18, + IB_CM_REJ_INVALID_ALT_LID = 19, + IB_CM_REJ_INVALID_ALT_SL = 20, + IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = 21, + IB_CM_REJ_INVALID_ALT_HOP_LIMIT = 22, + IB_CM_REJ_INVALID_ALT_PACKET_RATE = 23, + IB_CM_REJ_PORT_CM_REDIRECT = 24, + IB_CM_REJ_PORT_REDIRECT = 25, + IB_CM_REJ_INVALID_MTU = 26, + IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = 27, + IB_CM_REJ_CONSUMER_DEFINED = 28, + IB_CM_REJ_INVALID_RNR_RETRY = 29, + IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = 30, + IB_CM_REJ_INVALID_CLASS_VERSION = 31, + IB_CM_REJ_INVALID_FLOW_LABEL = 32, + IB_CM_REJ_INVALID_ALT_FLOW_LABEL = 33 +}; + +struct ib_cm_rej_event_param { + enum ib_cm_rej_reason reason; + void *ari; + u8 ari_length; +}; + +struct ib_cm_mra_event_param { + u8 service_timeout; +}; + +struct ib_cm_lap_event_param { + struct ib_sa_path_rec *alternate_path; +}; + +enum ib_cm_apr_status { + IB_CM_APR_SUCCESS, + IB_CM_APR_INVALID_COMM_ID, + IB_CM_APR_UNSUPPORTED, + IB_CM_APR_REJECT, + IB_CM_APR_REDIRECT, + IB_CM_APR_IS_CURRENT, + IB_CM_APR_INVALID_QPN_EECN, + IB_CM_APR_INVALID_LID, + IB_CM_APR_INVALID_GID, + IB_CM_APR_INVALID_FLOW_LABEL, + IB_CM_APR_INVALID_TCLASS, + IB_CM_APR_INVALID_HOP_LIMIT, + IB_CM_APR_INVALID_PACKET_RATE, + IB_CM_APR_INVALID_SL +}; + +struct ib_cm_apr_event_param { + enum ib_cm_apr_status ap_status; + void *apr_info; + u8 info_len; +}; + +struct ib_cm_sidr_req_event_param { + struct ib_cm_id *listen_id; + struct ib_device *device; + u8 port; + u16 pkey; +}; + +enum ib_cm_sidr_status { + IB_SIDR_SUCCESS, + IB_SIDR_UNSUPPORTED, + IB_SIDR_REJECT, + IB_SIDR_NO_QP, + IB_SIDR_REDIRECT, + IB_SIDR_UNSUPPORTED_VERSION +}; + +struct ib_cm_sidr_rep_event_param { + enum ib_cm_sidr_status status; + u32 qkey; + u32 qpn; + void *info; + u8 info_len; + +}; + +struct ib_cm_event { + enum ib_cm_event_type event; + union { + struct ib_cm_req_event_param req_rcvd; + struct ib_cm_rep_event_param rep_rcvd; + /* No data for RTU received events. */ + struct ib_cm_rej_event_param rej_rcvd; + struct ib_cm_mra_event_param mra_rcvd; + struct ib_cm_lap_event_param lap_rcvd; + struct ib_cm_apr_event_param apr_rcvd; + /* No data for DREQ/DREP received events. */ + struct ib_cm_sidr_req_event_param sidr_req_rcvd; + struct ib_cm_sidr_rep_event_param sidr_rep_rcvd; + enum ib_wc_status send_status; + } param; + + void *private_data; +}; + +/** + * ib_cm_handler - User-defined callback to process communication events. + * @cm_id: Communication identifier associated with the reported event. + * @event: Information about the communication event. + * + * IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events + * generated as a result of listen requests result in the allocation of a + * new @cm_id. The new @cm_id is returned to the user through this callback. + * Clients are responsible for destroying the new @cm_id. For peer-to-peer + * IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds + * to a user's existing communication identifier. + * + * Users may not call ib_destroy_cm_id while in the context of this callback; + * however, returning a non-zero value instructs the communication manager to + * destroy the @cm_id after the callback completes. + */ +typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, + struct ib_cm_event *event); + +struct ib_cm_id { + ib_cm_handler cm_handler; + void *context; + __be64 service_id; + __be64 service_mask; + enum ib_cm_state state; /* internal CM/debug use */ + enum ib_cm_lap_state lap_state; /* internal CM/debug use */ + __be32 local_id; + __be32 remote_id; +}; + +/** + * ib_create_cm_id - Allocate a communication identifier. + * @cm_handler: Callback invoked to notify the user of CM events. + * @context: User specified context associated with the communication + * identifier. + * + * Communication identifiers are used to track connection states, service + * ID resolution requests, and listen requests. + */ +struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, + void *context); + +/** + * ib_destroy_cm_id - Destroy a connection identifier. + * @cm_id: Connection identifier to destroy. + * + * This call blocks until the connection identifier is destroyed. + */ +void ib_destroy_cm_id(struct ib_cm_id *cm_id); + +#define IB_SERVICE_ID_AGN_MASK __constant_cpu_to_be64(0xFF00000000000000ULL) +#define IB_CM_ASSIGN_SERVICE_ID __constant_cpu_to_be64(0x0200000000000000ULL) + +/** + * ib_cm_listen - Initiates listening on the specified service ID for + * connection and service ID resolution requests. + * @cm_id: Connection identifier associated with the listen request. + * @service_id: Service identifier matched against incoming connection + * and service ID resolution requests. The service ID should be specified + * network-byte order. If set to IB_CM_ASSIGN_SERVICE_ID, the CM will + * assign a service ID to the caller. + * @service_mask: Mask applied to service ID used to listen across a + * range of service IDs. If set to 0, the service ID is matched + * exactly. This parameter is ignored if %service_id is set to + * IB_CM_ASSIGN_SERVICE_ID. + */ +int ib_cm_listen(struct ib_cm_id *cm_id, + __be64 service_id, + __be64 service_mask); + +struct ib_cm_req_param { + struct ib_sa_path_rec *primary_path; + struct ib_sa_path_rec *alternate_path; + __be64 service_id; + u32 qp_num; + enum ib_qp_type qp_type; + u32 starting_psn; + const void *private_data; + u8 private_data_len; + u8 peer_to_peer; + u8 responder_resources; + u8 initiator_depth; + u8 remote_cm_response_timeout; + u8 flow_control; + u8 local_cm_response_timeout; + u8 retry_count; + u8 rnr_retry_count; + u8 max_cm_retries; + u8 srq; +}; + +/** + * ib_send_cm_req - Sends a connection request to the remote node. + * @cm_id: Connection identifier that will be associated with the + * connection request. + * @param: Connection request information needed to establish the + * connection. + */ +int ib_send_cm_req(struct ib_cm_id *cm_id, + struct ib_cm_req_param *param); + +struct ib_cm_rep_param { + u32 qp_num; + u32 starting_psn; + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 target_ack_delay; + u8 failover_accepted; + u8 flow_control; + u8 rnr_retry_count; + u8 srq; +}; + +/** + * ib_send_cm_rep - Sends a connection reply in response to a connection + * request. + * @cm_id: Connection identifier that will be associated with the + * connection request. + * @param: Connection reply information needed to establish the + * connection. + */ +int ib_send_cm_rep(struct ib_cm_id *cm_id, + struct ib_cm_rep_param *param); + +/** + * ib_send_cm_rtu - Sends a connection ready to use message in response + * to a connection reply message. + * @cm_id: Connection identifier associated with the connection request. + * @private_data: Optional user-defined private data sent with the + * ready to use message. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_rtu(struct ib_cm_id *cm_id, + const void *private_data, + u8 private_data_len); + +/** + * ib_send_cm_dreq - Sends a disconnection request for an existing + * connection. + * @cm_id: Connection identifier associated with the connection being + * released. + * @private_data: Optional user-defined private data sent with the + * disconnection request message. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_dreq(struct ib_cm_id *cm_id, + const void *private_data, + u8 private_data_len); + +/** + * ib_send_cm_drep - Sends a disconnection reply to a disconnection request. + * @cm_id: Connection identifier associated with the connection being + * released. + * @private_data: Optional user-defined private data sent with the + * disconnection reply message. + * @private_data_len: Size of the private data buffer, in bytes. + * + * If the cm_id is in the correct state, the CM will transition the connection + * to the timewait state, even if an error occurs sending the DREP