From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923..c395f32b53b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- cgit v1.2.3-18-g5258 From d450f445f9a654080a6be4094376c2192d9a1f36 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Feb 2013 02:58:25 +0300 Subject: : fix compilation warnings with DT disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warnings (in Simon Horman's renesas.git repo): In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0: include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared inside parameter list [enabled by default] include/linux/of_platform.h:107:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared inside parameter list [enabled by default] only #include's headers with definitions of the above mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use incomplete declarations for the rest of the structures where the #ifdef move doesn't help... Reported-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Rob Herring --- include/linux/of_platform.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4dbdf1..2a93b64a386 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include #include + +#ifdef CONFIG_OF_DEVICE #include #include #include @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, -- cgit v1.2.3-18-g5258 From e30b5dca15dea86aa697f9d58ff646294fe80d3d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 3 May 2013 02:15:52 -0400 Subject: ext4: fix fio regression We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project Signed-off-by: Yan, Zheng Signed-off-by: Zheng Liu Cc: "Theodore Ts'o" --- include/trace/events/ext4.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index d0e686402df..8ee15b97cd3 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -2139,7 +2139,7 @@ TRACE_EVENT(ext4_es_remove_extent, __entry->lblk, __entry->len) ); -TRACE_EVENT(ext4_es_find_delayed_extent_enter, +TRACE_EVENT(ext4_es_find_delayed_extent_range_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk), TP_ARGS(inode, lblk), @@ -2161,7 +2161,7 @@ TRACE_EVENT(ext4_es_find_delayed_extent_enter, (unsigned long) __entry->ino, __entry->lblk) ); -TRACE_EVENT(ext4_es_find_delayed_extent_exit, +TRACE_EVENT(ext4_es_find_delayed_extent_range_exit, TP_PROTO(struct inode *inode, struct extent_status *es), TP_ARGS(inode, es), -- cgit v1.2.3-18-g5258 From 2acd09f3232825a0e95134703ec59bc327ef9967 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 25 Apr 2013 15:04:02 -0700 Subject: target: Remove unused struct members in se_dev_entry Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c4af592f705..136b7b2f7b3 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -572,12 +572,8 @@ struct se_dev_entry { bool def_pr_registered; /* See transport_lunflags_table */ u32 lun_flags; - u32 deve_cmds; u32 mapped_lun; - u32 average_bytes; - u32 last_byte_count; u32 total_cmds; - u32 total_bytes; u64 pr_res_key; u64 creation_time; u32 attach_count; -- cgit v1.2.3-18-g5258 From 54afc1214133deddd49162b101971af5711f1b3a Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:33 +0300 Subject: drm: Add kernel-doc for drm_fb_helper_funcs->initial_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 8230b46fdd7..61ebd51f611 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -57,6 +57,7 @@ struct drm_fb_helper_surface_size { * @fb_probe: - Driver callback to allocate and initialize the fbdev info * structure. Futhermore it also needs to allocate the drm * framebuffer used to back the fbdev. + * @initial_config: - Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3-18-g5258 From 7b97936f298af7991ca4717a4c23610d9ecd8927 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 8 May 2013 16:38:34 +0300 Subject: drm: Remove pointless '-' characters from drm_fb_helper documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 61ebd51f611..471f276ce8f 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -50,14 +50,14 @@ struct drm_fb_helper_surface_size { /** * struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library - * @gamma_set: - Set the given gamma lut register on the given crtc. - * @gamma_get: - Read the given gamma lut register on the given crtc, used to - * save the current lut when force-restoring the fbdev for e.g. - * kdbg. - * @fb_probe: - Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm - * framebuffer used to back the fbdev. - * @initial_config: - Setup an initial fbdev display configuration + * @gamma_set: Set the given gamma lut register on the given crtc. + * @gamma_get: Read the given gamma lut register on the given crtc, used to + * save the current lut when force-restoring the fbdev for e.g. + * kdbg. + * @fb_probe: Driver callback to allocate and initialize the fbdev info + * structure. Futhermore it also needs to allocate the drm + * framebuffer used to back the fbdev. + * @initial_config: Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3-18-g5258 From b9434d0f162c351e02e0e8f66ca6b75a67595537 Mon Sep 17 00:00:00 2001 From: Chris Cummins Date: Thu, 9 May 2013 14:20:40 +0100 Subject: drm: Use names of ioctls in debug traces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intention here is to make the output of dmesg with full verbosity a bit easier for a human to parse. This commit transforms: [drm:drm_ioctl], pid=699, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, cmd=0xc0106464, nr=0x64, dev 0xe200, auth=1 [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, cmd=0x400c645f, nr=0x5f, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [drm:intel_crtc_set_config], [CRTC:3] [NOFB] into: [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_THROTTLE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_CREATE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_TILING [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, IOCTL_MODE_ADDFB [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_MMAP_GTT [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB [drm:intel_crtc_set_config], [CRTC:3] [NOFB] v2: drm_ioctls is now a constant (Ville Syrjälä) Signed-off-by: Chris Cummins Signed-off-by: Dave Airlie --- include/drm/drmP.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index f1ce786736e..b092b5bcf22 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -316,6 +316,7 @@ struct drm_ioctl_desc { int flags; drm_ioctl_t *func; unsigned int cmd_drv; + const char *name; }; /** @@ -324,7 +325,7 @@ struct drm_ioctl_desc { */ #define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl} + [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl, .name = #ioctl} struct drm_magic_entry { struct list_head head; -- cgit v1.2.3-18-g5258 From 7677fc965fba41d1386fa3b76a1f00303f02bb2d Mon Sep 17 00:00:00 2001 From: Rony Efraim Date: Wed, 8 May 2013 22:22:35 +0000 Subject: net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/qp.h | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 67f46ad6920..352eec9df1b 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -126,7 +126,7 @@ struct mlx4_rss_context { struct mlx4_qp_path { u8 fl; - u8 reserved1[1]; + u8 vlan_control; u8 disable_pkey_check; u8 pkey_index; u8 counter_index; @@ -141,11 +141,32 @@ struct mlx4_qp_path { u8 sched_queue; u8 vlan_index; u8 feup; - u8 reserved3; + u8 fvl_rx; u8 reserved4[2]; u8 dmac[6]; }; +enum { /* fl */ + MLX4_FL_CV = 1 << 6, + MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2 +}; +enum { /* vlan_control */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 +}; + +enum { /* feup */ + MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */ + MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */ + MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */ +}; + +enum { /* fvl_rx */ + MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */ +}; + struct mlx4_qp_context { __be32 flags; __be32 pd; @@ -185,6 +206,10 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +enum { /* param3 */ + MLX4_STRIP_VLAN = 1 << 30 +}; + /* Which firmware version adds support for NEC (NoErrorCompletion) bit */ #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232) -- cgit v1.2.3-18-g5258 From f77d602124d865c38705df7fa25c03de9c284ad2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 May 2013 10:28:16 +0000 Subject: ipv6: do not clear pinet6 field We have seen multiple NULL dereferences in __inet6_lookup_established() After analysis, I found that inet6_sk() could be NULL while the check for sk_family == AF_INET6 was true. Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP and TCP stacks. Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash table, we no longer can clear pinet6 field. This patch extends logic used in commit fcbdf09d9652c891 ("net: fix nulls list corruptions in sk_prot_alloc") TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method to make sure we do not clear pinet6 field. At socket clone phase, we do not really care, as cloning the parent (non NULL) pinet6 is not adding a fatal race. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 5c97b0fc562..66772cf8c3c 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -866,6 +866,18 @@ struct inet_hashinfo; struct raw_hashinfo; struct module; +/* + * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes + * un-modified. Special care is taken when initializing object to zero. + */ +static inline void sk_prot_clear_nulls(struct sock *sk, int size) +{ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + size - offsetof(struct sock, sk_node.pprev)); +} + /* Networking protocol blocks we attach to sockets. * socket layer -> transport layer interface * transport -> network interface is defined by struct inet_proto -- cgit v1.2.3-18-g5258 From 0a3b15ac3cc3ddc791901e12bdc930b5fa11a30a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 21:54:37 +0200 Subject: ACPI / PM: Move processor suspend/resume to syscore_ops The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki --- include/acpi/processor.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b327b5a9296..ea69367fdd3 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,10 +329,16 @@ int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -int acpi_processor_suspend(struct device *dev); -int acpi_processor_resume(struct device *dev); extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_PM_SLEEP +void acpi_processor_syscore_init(void); +void acpi_processor_syscore_exit(void); +#else +static inline void acpi_processor_syscore_init(void) {} +static inline void acpi_processor_syscore_exit(void) {} +#endif + /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; -- cgit v1.2.3-18-g5258 From 36200af867e2cf5adc1ff77214b2524f6111736f Mon Sep 17 00:00:00 2001 From: Jan-Simon Möller Date: Tue, 30 Apr 2013 09:39:04 +0000 Subject: ACPI: Fix section to __init. Align with usage in acpixf.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes warning during compilation with clang. [rjw: Subject and changelog] Signed-off-by: Jan-Simon Möller Signed-off-by: Rafael J. Wysocki --- include/acpi/acpiosxf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5b3d2bd4813..64b8c763952 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -77,7 +77,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status __initdata acpi_os_initialize(void); +acpi_status __init acpi_os_initialize(void); acpi_status acpi_os_terminate(void); -- cgit v1.2.3-18-g5258 From 95643359f8b31e74b35901f4e36cd069cd67fd48 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 15:23:49 +1000 Subject: drm: remove unused wrapper macros We don't use these anymore so nuke them. Signed-off-by: Dave Airlie --- include/drm/drm_os_linux.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include') diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 393369147a2..675ddf4b441 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ -- cgit v1.2.3-18-g5258 From e2555fde4159467fb579e6ae3c0a8fc33015d0f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 May 2013 09:45:01 -0400 Subject: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() Commit ae4647fb (jbd2: reduce journal_head size) introduced a regression where we occasionally hit panic in jbd2_journal_put_journal_head() because of wrong b_jcount. The bug is caused by gcc making 64-bit access to 32-bit bitfield and thus clobbering b_jcount. At least for now, those 8 bytes saved in struct journal_head are not worth the trouble with gcc bitfield handling so revert that part of the patch. Reported-by: EUNBONG SONG Reported-by: Tony Luck Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- include/linux/journal-head.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 13a3da25ff0..98cd41bb39c 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -30,15 +30,19 @@ struct journal_head { /* * Journalling list for this buffer [jbd_lock_bh_state()] + * NOTE: We *cannot* combine this with b_modified into a bitfield + * as gcc would then (which the C standard allows but which is + * very unuseful) make 64-bit accesses to the bitfield and clobber + * b_jcount if its update races with bitfield modification. */ - unsigned b_jlist:4; + unsigned b_jlist; /* * This flag signals the buffer has been modified by * the currently running transaction * [jbd_lock_bh_state()] */ - unsigned b_modified:1; + unsigned b_modified; /* * Copy of the buffer data frozen for writing to the log. -- cgit v1.2.3-18-g5258 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- include/linux/acpi_dma.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf..fb029808291 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v1.2.3-18-g5258 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- include/linux/platform_data/clk-lpss.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73ce46d..23901992b9d 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v1.2.3-18-g5258 From 63ad9cbff5896dadfee510f631ffcb0176984722 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 23 Apr 2013 15:28:38 +0200 Subject: pinctrl: generic: Fix typos and clarify comments Drive strength controls both sink and source currents, clarify the description accordingly. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e..6aa23809662 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. -- cgit v1.2.3-18-g5258 From b4f711ee03d28f776fd2324fd0bd999cc428e4d2 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 24 Apr 2013 11:32:56 -0700 Subject: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers Signed-off-by: John Stultz Cc: stable #3.9 Cc: Feng Tang Cc: Jason Gunthorpe Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/time.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/time.h b/include/linux/time.h index 22d81b3c955..d5d229b2e5a 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts) extern bool persistent_clock_exist; -#ifdef ALWAYS_USE_PERSISTENT_CLOCK -#define has_persistent_clock() true -#else static inline bool has_persistent_clock(void) { return persistent_clock_exist; } -#endif extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); -- cgit v1.2.3-18-g5258 From a1321ddd27e65c6ada5b9a12cae4ee2612d76893 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:05 -0400 Subject: target: removed unused transport_state flag Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 136b7b2f7b3..e773dfa5f98 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -463,7 +463,6 @@ struct se_cmd { #define CMD_T_ABORTED (1 << 0) #define CMD_T_ACTIVE (1 << 1) #define CMD_T_COMPLETE (1 << 2) -#define CMD_T_QUEUED (1 << 3) #define CMD_T_SENT (1 << 4) #define CMD_T_STOP (1 << 5) #define CMD_T_FAILED (1 << 6) -- cgit v1.2.3-18-g5258 From ccf5ae83a6cf3d9cfe9a7038bfe7cd38ab03d5e1 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:06 -0400 Subject: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Nicholas Bellinger --- include/linux/kref.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include') diff --git a/include/linux/kref.h b/include/linux/kref.h index 4972e6e9ca9..7419c02085d 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -19,6 +19,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -95,6 +96,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) return kref_sub(kref, 1, release); } +/** + * kref_put_spinlock_irqsave - decrement refcount for object. + * @kref: object. + * @release: pointer to the function that will clean up the object when the + * last reference to the object is released. + * This pointer is required, and it is not acceptable to pass kfree + * in as this function. + * @lock: lock to take in release case + * + * Behaves identical to kref_put with one exception. If the reference count + * drops to zero, the lock will be taken atomically wrt dropping the reference + * count. The release function has to call spin_unlock() without _irqrestore. + */ +static inline int kref_put_spinlock_irqsave(struct kref *kref, + void (*release)(struct kref *kref), + spinlock_t *lock) +{ + unsigned long flags; + + WARN_ON(release == NULL); + if (atomic_add_unless(&kref->refcount, -1, 1)) + return 0; + spin_lock_irqsave(lock, flags); + if (atomic_dec_and_test(&kref->refcount)) { + release(kref); + local_irq_restore(flags); + return 1; + } + spin_unlock_irqrestore(lock, flags); + return 0; +} + static inline int kref_put_mutex(struct kref *kref, void (*release)(struct kref *kref), struct mutex *lock) -- cgit v1.2.3-18-g5258 From 8cdb46da06ea94543a3b2e53e3e92736421d1093 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Wed, 15 May 2013 01:23:45 +0000 Subject: netfilter: log: netns NULL ptr bug when calling from conntrack Since (69b34fb netfilter: xt_LOG: add net namespace support for xt_LOG), we hit this: [ 4224.708977] BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 [ 4224.709074] IP: [] ipt_log_packet+0x29/0x270 when callling log functions from conntrack both in and out are NULL i.e. the net pointer is invalid. Adding struct net *net in call to nf_logfn() will secure that there always is a vaild net ptr. Reported as netfilter's bugzilla bug 818: https://bugzilla.netfilter.org/show_bug.cgi?id=818 Reported-by: Ronald Signed-off-by: Hans Schillstrom Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_log.h | 3 ++- include/net/netfilter/nfnetlink_log.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h index 31f1fb9eb78..99eac12d040 100644 --- a/include/net/netfilter/nf_log.h +++ b/include/net/netfilter/nf_log.h @@ -30,7 +30,8 @@ struct nf_loginfo { } u; }; -typedef void nf_logfn(u_int8_t pf, +typedef void nf_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h index e2dec42c2db..5ca3f14f099 100644 --- a/include/net/netfilter/nfnetlink_log.h +++ b/include/net/netfilter/nfnetlink_log.h @@ -2,7 +2,8 @@ #define _KER_NFNETLINK_LOG_H void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, -- cgit v1.2.3-18-g5258 From de97f250394996f5acb07ba9e6dbdfc15ee4316c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 09:51:44 -0400 Subject: Correct typo "supperspeed" to "superspeed". Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index c454a88abf2..f1b0dca60f1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) } /** - * gadget_is_superspeed() - return true if the hardware handles - * supperspeed - * @g: controller that might support supper speed + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -- cgit v1.2.3-18-g5258 From 755ccb9d577b95b43537cfeb36da59140412f858 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 May 2013 08:00:25 +0000 Subject: broadcom: add include guards to include/linux/brcmphy.h include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b840a496028..677b4f01b2d 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -1,3 +1,6 @@ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5241 0x0143bc30 @@ -29,3 +32,5 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 + +#endif /* _LINUX_BRCMPHY_H */ -- cgit v1.2.3-18-g5258 From f6b3d85f7f6d66f890862d763b2ed092c5dd4322 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 3 May 2013 10:01:03 +0200 Subject: mac80211: fix spurious RCU warning and update documentation Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 04c2d4670dc..885898a40d1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3043,7 +3043,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw); * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be - * mixed for a single hardware. + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * In process context use instead ieee80211_rx_ni(). * @@ -3059,7 +3060,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally defers to a tasklet.) * * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not - * be mixed for a single hardware. + * be mixed for a single hardware.Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3073,7 +3075,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally disables bottom halves). * * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may - * not be mixed for a single hardware. + * not be mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3196,7 +3199,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() - * may not be mixed for a single hardware. + * may not be mixed for a single hardware. Must not run concurrently with + * ieee80211_rx() or ieee80211_rx_ni(). * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call -- cgit v1.2.3-18-g5258 From b0ce3508b25ea6fa10ae3ca254de1d695b521702 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 May 2013 07:34:53 +0000 Subject: bonding: allow TSO being set on bonding master MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet Cc: Michał Mirosław Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- include/linux/netdevice.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a94a5a0ab12..60584b185a0 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features( } netdev_features_t netdev_increment_features(netdev_features_t all, netdev_features_t one, netdev_features_t mask); + +/* Allow TSO being used on stacked device : + * Performing the GSO segmentation before last device + * is a performance improvement. + */ +static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, + netdev_features_t mask) +{ + return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); +} + int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); void netdev_change_features(struct net_device *dev); -- cgit v1.2.3-18-g5258 From 0b8ebdb18888c55588b932f4f564b9c9529de627 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 9 May 2013 13:08:08 +0200 Subject: mfd: ab8500-sysctrl: Always enable pm_power_off handler AB8500 sysctrl driver implements a pm_power_off handler, but that is currently not registered until a specific platform data field is enabled. This patch drops the platform data field and always registers ab8500_power_off if no other pm_power_off handler was defined before, and also introduces the necessary cleanup code in the driver's remove function. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/abx500/ab8500.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fb1bf7d6a41..0390d5943ed 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; - bool pm_power_off; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; -- cgit v1.2.3-18-g5258 From 0693196fe7bbb5e6cafd255dfce91ff6d10bc18f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:27 +0200 Subject: USB: serial: add wait_until_sent operation Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b9b0f7b4e43..afbb7eeaac5 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,6 +268,7 @@ struct usb_serial_driver { struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); + void (*wait_until_sent)(struct tty_struct *tty, long timeout); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); -- cgit v1.2.3-18-g5258 From dcf0105039660e951dfea348d317043d17988dfc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 8 May 2013 17:51:43 +0200 Subject: USB: serial: add generic wait_until_sent implementation Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index afbb7eeaac5..302ddf55d2d 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,6 +269,7 @@ struct usb_serial_driver { void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); + bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); @@ -328,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, + long timeout); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); -- cgit v1.2.3-18-g5258 From d4988d4c733ba0b61cb372edd3d1992d26dd10d3 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Thu, 9 May 2013 21:24:24 +0200 Subject: bcma: add more core IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index f14a98a79c9..2e34db82a64 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,7 +134,10 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -#define BCMA_CORE_ARM_CR4 0x83e +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -- cgit v1.2.3-18-g5258 From 3f327e39b4b8f760c331bb2836735be6d83fbf53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 May 2013 11:06:03 -0600 Subject: PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo Tested-by: Gavin Guo Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Reviewed-by: Jiang Liu Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.9+ --- include/linux/pci-acpi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 81b31613eb2..17044797727 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { } void acpiphp_init(void); void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle); void acpiphp_remove_slots(struct pci_bus *bus); +void acpiphp_check_host_bridge(acpi_handle handle); #else static inline void acpiphp_init(void) { } static inline void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle) { } static inline void acpiphp_remove_slots(struct pci_bus *bus) { } +static inline void acpiphp_check_host_bridge(acpi_handle handle) { } #endif #else /* CONFIG_ACPI */ -- cgit v1.2.3-18-g5258 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- include/linux/platform_data/serial-omap.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aab528..c860c1b314c 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v1.2.3-18-g5258 From d2f83e9078b8114e3b9d09082856c1aac299aa37 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 May 2013 09:05:21 +0930 Subject: Hoist memcpy_fromiovec/memcpy_toiovec into lib/ ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap Acked-by: David S. Miller Acked-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- include/linux/socket.h | 2 -- include/linux/uio.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/socket.h b/include/linux/socket.h index 428c37a1f95..33bf2dfab19 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -305,7 +305,6 @@ struct ucred { extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred); -extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, @@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, unsigned int len, __wsum *csump); extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); -extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); diff --git a/include/linux/uio.h b/include/linux/uio.h index 629aaf51f30..c55ce243cc0 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len); #endif -- cgit v1.2.3-18-g5258 From 6407d75afd08545f2252bb39806ffd3f10c7faac Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 17 May 2013 10:44:15 +0930 Subject: virtio_console: fix uapi header uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org --- include/uapi/linux/virtio_console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6c361..c312f16bc4e 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -39,7 +39,7 @@ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ -- cgit v1.2.3-18-g5258 From 2a0f90551a76a626fd6a606877c8635f52f066e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jul 2012 18:48:52 -0400 Subject: drm/radeon: add Hainan pci ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- include/drm/drm_pciids.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598f701..bb1bc485390 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3-18-g5258 From 421b40a6286ee343d77d5e51f5ee6d04d7a2a90f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 17 May 2013 12:41:03 -0400 Subject: tty/vt: Fix vc_deallocate() lock order Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [] lock_acquire+0xa4/0x210 [] console_lock+0x77/0x80 [] con_flush_chars+0x2d/0x50 [] n_tty_receive_buf+0x122/0x14d0 [] flush_to_ldisc+0x119/0x170 [] process_one_work+0x211/0x700 [] worker_thread+0x11b/0x3a0 [] kthread+0xed/0x100 [] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [] __lock_acquire+0x193a/0x1c00 [] lock_acquire+0xa4/0x210 [] flush_work+0x4e/0x2e0 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] tty_ioctl+0x285/0xd50 [] do_vfs_ioctl+0x305/0x530 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [] print_circular_bug+0x200/0x20e [] __lock_acquire+0x193a/0x1c00 [] ? sched_clock+0x9/0x10 [] ? sched_clock+0x9/0x10 [] ? native_sched_clock+0x20/0x80 [] lock_acquire+0xa4/0x210 [] ? flush_work+0x5/0x2e0 [] flush_work+0x4e/0x2e0 [] ? flush_work+0x5/0x2e0 [] ? mark_held_locks+0xbb/0x140 [] ? __free_pages_ok.part.57+0x93/0xc0 [] ? mark_held_locks+0xbb/0x140 [] ? __cancel_work_timer+0x82/0x130 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] ? lock_release_holdtime.part.30+0xa1/0x170 [] tty_ioctl+0x285/0xd50 [] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [] do_vfs_ioctl+0x305/0x530 [] ? selinux_file_ioctl+0x5b/0x110 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b Cc: Dave Jones Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/vt_kern.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index e8d65718560..0d33fca4877 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -36,7 +36,7 @@ extern int fg_console, last_console, want_console; int vc_allocate(unsigned int console); int vc_cons_allocated(unsigned int console); int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines); -void vc_deallocate(unsigned int console); +struct vc_data *vc_deallocate(unsigned int console); void reset_palette(struct vc_data *vc); void do_blank_screen(int entering_gfx); void do_unblank_screen(int leaving_gfx); -- cgit v1.2.3-18-g5258 From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- include/target/target_core_fabric.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b73c0..8a26f0d55fd 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v1.2.3-18-g5258 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ --- include/acpi/acpi_bus.h | 40 +++++----------------------------------- 1 file changed, 5 insertions(+), 35 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d9f9b..636c59f2003 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v1.2.3-18-g5258 From 154c2670087bd7f54688274aca627433e4a7c181 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:51:10 +0200 Subject: Add include dependencies to . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If has not been included before , a build error like the below one will result: CC arch/mips/kernel/idle.o In file included from arch/mips/kernel/idle.c:17:0: include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’ include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’ In file included from include/linux/kernel.h:14:0, from include/linux/sched.h:15, from arch/mips/kernel/idle.c:18: include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’: include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration] Fixed by including . Signed-off-by: Ralf Baechle --- include/linux/printk.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/printk.h b/include/linux/printk.h index 6af944ab38f..22c7052e937 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -4,6 +4,7 @@ #include #include #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -- cgit v1.2.3-18-g5258 From 576ebd74928fd60ae112b33c42b89602015fadbd Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 21 May 2013 16:08:22 +0200 Subject: kernel: Fix s390 absolute memory access for /dev/mem On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- include/asm-generic/io.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index ac9da00e9f2..d5afe96adba 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -343,8 +343,12 @@ extern void ioport_unmap(void __iomem *p); #endif /* CONFIG_GENERIC_IOMAP */ #endif /* CONFIG_HAS_IOPORT */ +#ifndef xlate_dev_kmem_ptr #define xlate_dev_kmem_ptr(p) p +#endif +#ifndef xlate_dev_mem_ptr #define xlate_dev_mem_ptr(p) __va(p) +#endif #ifdef CONFIG_VIRT_TO_BUS #ifndef virt_to_bus -- cgit v1.2.3-18-g5258 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- include/video/omapdss.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa093337..9b52340ec3f 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v1.2.3-18-g5258 From 2a7851bffb008ff4882eee673da74718997b4265 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 May 2013 03:56:10 +0000 Subject: netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6.h | 16 ++++++++++++++++ include/net/addrconf.h | 2 +- 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 98ffb54988b..2d4df6ce043 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -17,6 +17,22 @@ extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook, extern int ipv6_netfilter_init(void); extern void ipv6_netfilter_fini(void); + +/* + * Hook functions for ipv6 to allow xt_* modules to be built-in even + * if IPv6 is a module. + */ +struct nf_ipv6_ops { + int (*chk_addr)(struct net *net, const struct in6_addr *addr, + const struct net_device *dev, int strict); +}; + +extern const struct nf_ipv6_ops __rcu *nf_ipv6_ops; +static inline const struct nf_ipv6_ops *nf_get_ipv6_ops(void) +{ + return rcu_dereference(nf_ipv6_ops); +} + #else /* CONFIG_NETFILTER */ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 84a6440f1f1..21f702704f2 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -65,7 +65,7 @@ extern int addrconf_set_dstaddr(struct net *net, extern int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, + const struct net_device *dev, int strict); #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) -- cgit v1.2.3-18-g5258 From 7805d000db30a3787a4c969bab6ae4d8a5fd8ce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 24 May 2013 10:50:24 +0900 Subject: cgroup: fix a subtle bug in descendant pre-order walk When cgroup_next_descendant_pre() initiates a walk, it checks whether the subtree root doesn't have any children and if not returns NULL. Later code assumes that the subtree isn't empty. This is broken because the subtree may become empty inbetween, which can lead to the traversal escaping the subtree by walking to the sibling of the subtree root. There's no reason to have the early exit path. Remove it along with the later assumption that the subtree isn't empty. This simplifies the code a bit and fixes the subtle bug. While at it, fix the comment of cgroup_for_each_descendant_pre() which was incorrectly referring to ->css_offline() instead of ->css_online(). Signed-off-by: Tejun Heo Reviewed-by: Michal Hocko Cc: stable@vger.kernel.org --- include/linux/cgroup.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 5047355b9a0..8bda1294c03 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -707,7 +707,7 @@ struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos); * * If a subsystem synchronizes against the parent in its ->css_online() and * before starting iterating, and synchronizes against @pos on each - * iteration, any descendant cgroup which finished ->css_offline() is + * iteration, any descendant cgroup which finished ->css_online() is * guaranteed to be visible in the future iterations. * * In other words, the following guarantees that a descendant can't escape -- cgit v1.2.3-18-g5258 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rio.h | 13 ++++++++++++- include/linux/rio_drv.h | 1 + 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e78427866..cd3796ee741 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c05920ab..5059994fe29 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v1.2.3-18-g5258 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rio.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796ee741..18e099342e6 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v1.2.3-18-g5258 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2692d..1133695eb06 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v1.2.3-18-g5258 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329ceb28..e9ef6d6b51d 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v1.2.3-18-g5258 From 26cb63ad11e04047a64309362674bcbbd6a6f246 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 28 May 2013 10:55:48 +0200 Subject: perf: Fix perf mmap bugs Vince reported a problem found by his perf specific trinity fuzzer. Al noticed 2 problems with perf's mmap(): - it has issues against fork() since we use vma->vm_mm for accounting. - it has an rb refcount leak on double mmap(). We fix the issues against fork() by using VM_DONTCOPY; I don't think there's code out there that uses this; we didn't hear about weird accounting problems/crashes. If we do need this to work, the previously proposed VM_PINNED could make this work. Aside from the rb reference leak spotted by Al, Vince's example prog was indeed doing a double mmap() through the use of perf_event_set_output(). This exposes another problem, since we now have 2 events with one buffer, the accounting gets screwy because we account per event. Fix this by making the buffer responsible for its own accounting. Reported-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Al Viro Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index f463a46424e..c5b6dbf9c2f 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -389,8 +389,7 @@ struct perf_event { /* mmap bits */ struct mutex mmap_mutex; atomic_t mmap_count; - int mmap_locked; - struct user_struct *mmap_user; + struct ring_buffer *rb; struct list_head rb_entry; -- cgit v1.2.3-18-g5258 From 12bcbe66d7b3cc9f9f86cd02f925666eaa3c2107 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:42 -0400 Subject: rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu() As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Add a new interface to RCU for both rcu_dereference_raw_notrace() as well as hlist_for_each_entry_rcu_notrace() as the hlist iterator uses the rcu_dereference_raw() as well, and is used a bit with the function tracer. Link: http://lkml.kernel.org/r/20130528184209.304356745@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt --- include/linux/rculist.h | 20 ++++++++++++++++++++ include/linux/rcupdate.h | 9 +++++++++ 2 files changed, 29 insertions(+) (limited to 'include') diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 8089e35d47a..f4b1001a467 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -460,6 +460,26 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\ &(pos)->member)), typeof(*(pos)), member)) +/** + * hlist_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing) + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as hlist_add_head_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + * + * This is the same as hlist_for_each_entry_rcu() except that it does + * not do any RCU debugging or tracing. + */ +#define hlist_for_each_entry_rcu_notrace(pos, head, member) \ + for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\ + typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\ + &(pos)->member)), typeof(*(pos)), member)) + /** * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type * @pos: the type * to use as a loop cursor. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 4ccd68e49b0..ddcc7826d90 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -640,6 +640,15 @@ static inline void rcu_preempt_sleep_check(void) #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ +/* + * The tracing infrastructure traces RCU (we want that), but unfortunately + * some of the RCU checks causes tracing to lock up the system. + * + * The tracing version of rcu_dereference_raw() must not call + * rcu_read_lock_held(). + */ +#define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu) + /** * rcu_access_index() - fetch RCU index with no dereferencing * @p: The index to read -- cgit v1.2.3-18-g5258 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- include/xen/xenbus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c1e3a..569c07f2e34 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v1.2.3-18-g5258 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa5f98..4ea4f985f39 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v1.2.3-18-g5258 From ac4e97abce9b80c020e7113325f49e58b7b15e3f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 May 2013 09:19:35 +0200 Subject: scatterlist: sg_set_buf() argument must be in linear mapping Add a check behind CONFIG_DEBUG_SG to verify this. Signed-off-by: Rusty Russell Signed-off-by: Jens Axboe --- include/linux/scatterlist.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 5951e3f3887..26806775b11 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -111,6 +111,9 @@ static inline struct page *sg_page(struct scatterlist *sg) static inline void sg_set_buf(struct scatterlist *sg, const void *buf, unsigned int buflen) { +#ifdef CONFIG_DEBUG_SG + BUG_ON(!virt_addr_valid(buf)); +#endif sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); } -- cgit v1.2.3-18-g5258 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- include/linux/aer.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b24c1..737f90ab4b6 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v1.2.3-18-g5258 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- include/target/target_core_fabric.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d55fd..1dcce9cc99b 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v1.2.3-18-g5258 From 45eacc692771bd2b1ea3d384e6345cab3da10861 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 15 May 2013 22:16:32 +0200 Subject: vtime: Use consistent clocks among nohz accounting While computing the cputime delta of dynticks CPUs, we are mixing up clocks of differents natures: * local_clock() which takes care of unstable clock sources and fix these if needed. * sched_clock() which is the weaker version of local_clock(). It doesn't compute any fixup in case of unstable source. If the clock source is stable, those two clocks are the same and we can safely compute the difference against two random points. Otherwise it results in random deltas as sched_clock() can randomly drift away, back or forward, from local_clock(). As a consequence, some strange behaviour with unstable tsc has been observed such as non progressing constant zero cputime. (The 'top' command showing no load). Fix this by only using local_clock(), or its irq safe/remote equivalent, in vtime code. Reported-by: Mike Galbraith Suggested-by: Mike Galbraith Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Li Zhong Cc: Mike Galbraith Signed-off-by: Frederic Weisbecker Signed-off-by: Ingo Molnar --- include/linux/vtime.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/vtime.h b/include/linux/vtime.h index 71a5782d8c5..b1dd2db8007 100644 --- a/include/linux/vtime.h +++ b/include/linux/vtime.h @@ -34,7 +34,7 @@ static inline void vtime_user_exit(struct task_struct *tsk) } extern void vtime_guest_enter(struct task_struct *tsk); extern void vtime_guest_exit(struct task_struct *tsk); -extern void vtime_init_idle(struct task_struct *tsk); +extern void vtime_init_idle(struct task_struct *tsk, int cpu); #else static inline void vtime_account_irq_exit(struct task_struct *tsk) { @@ -45,7 +45,7 @@ static inline void vtime_user_enter(struct task_struct *tsk) { } static inline void vtime_user_exit(struct task_struct *tsk) { } static inline void vtime_guest_enter(struct task_struct *tsk) { } static inline void vtime_guest_exit(struct task_struct *tsk) { } -static inline void vtime_init_idle(struct task_struct *tsk) { } +static inline void vtime_init_idle(struct task_struct *tsk, int cpu) { } #endif #ifdef CONFIG_IRQ_TIME_ACCOUNTING -- cgit v1.2.3-18-g5258 From 521921bad1192fb1b8f9b6a5aa673635848b8b5f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Thu, 16 May 2013 01:21:38 +0200 Subject: kvm: Move guest entry/exit APIs to context_tracking The kvm_host.h header file doesn't handle well inclusion when archs don't support KVM. This results in build crashes for such archs when they want to implement context tracking because this subsystem includes kvm_host.h in order to implement the guest_enter/exit APIs but it doesn't handle KVM off case. To fix this, move the guest_enter()/guest_exit() declarations and generic implementation to the context tracking headers. These generic APIs actually belong to this subsystem, besides other domains boundary tracking like user_enter() et al. KVM now properly becomes a user of this library, not the other buggy way around. Reported-by: Kevin Hilman Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Paul E. McKenney Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Kevin Hilman Cc: Marcelo Tosatti Cc: Gleb Natapov Signed-off-by: Ingo Molnar --- include/linux/context_tracking.h | 35 +++++++++++++++++++++++++++++++++++ include/linux/kvm_host.h | 37 +------------------------------------ 2 files changed, 36 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h index 365f4a61bf0..fc09d7b0dac 100644 --- a/include/linux/context_tracking.h +++ b/include/linux/context_tracking.h @@ -3,6 +3,7 @@ #include #include +#include #include struct context_tracking { @@ -19,6 +20,26 @@ struct context_tracking { } state; }; +static inline void __guest_enter(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags |= PF_VCPU; +} + +static inline void __guest_exit(void) +{ + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system(current); + current->flags &= ~PF_VCPU; +} + #ifdef CONFIG_CONTEXT_TRACKING DECLARE_PER_CPU(struct context_tracking, context_tracking); @@ -35,6 +56,9 @@ static inline bool context_tracking_active(void) extern void user_enter(void); extern void user_exit(void); +extern void guest_enter(void); +extern void guest_exit(void); + static inline enum ctx_state exception_enter(void) { enum ctx_state prev_ctx; @@ -57,6 +81,17 @@ extern void context_tracking_task_switch(struct task_struct *prev, static inline bool context_tracking_in_user(void) { return false; } static inline void user_enter(void) { } static inline void user_exit(void) { } + +static inline void guest_enter(void) +{ + __guest_enter(); +} + +static inline void guest_exit(void) +{ + __guest_exit(); +} + static inline enum ctx_state exception_enter(void) { return 0; } static inline void exception_exit(enum ctx_state prev_ctx) { } static inline void context_tracking_task_switch(struct task_struct *prev, diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index f0eea07d2c2..8db53cfaccd 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -760,42 +761,6 @@ static inline int kvm_iommu_unmap_guest(struct kvm *kvm) } #endif -static inline void __guest_enter(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags |= PF_VCPU; -} - -static inline void __guest_exit(void) -{ - /* - * This is running in ioctl context so we can avoid - * the call to vtime_account() with its unnecessary idle check. - */ - vtime_account_system(current); - current->flags &= ~PF_VCPU; -} - -#ifdef CONFIG_CONTEXT_TRACKING -extern void guest_enter(void); -extern void guest_exit(void); - -#else /* !CONFIG_CONTEXT_TRACKING */ -static inline void guest_enter(void) -{ - __guest_enter(); -} - -static inline void guest_exit(void) -{ - __guest_exit(); -} -#endif /* !CONFIG_CONTEXT_TRACKING */ - static inline void kvm_guest_enter(void) { unsigned long flags; -- cgit v1.2.3-18-g5258 From 1e2bd517c108816220f262d7954b697af03b5f9c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 30 May 2013 06:45:27 +0000 Subject: udp6: Fix udp fragmentation for tunnel traffic. udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov Signed-off-by: Pravin B Shelar Tested-by: Dmitry Kravkov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2e0ced1af3b..9c676eae396 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2852,6 +2852,21 @@ static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) SKB_GSO_CB(inner_skb)->mac_offset; } +static inline int gso_pskb_expand_head(struct sk_buff *skb, int extra) +{ + int new_headroom, headroom; + int ret; + + headroom = skb_headroom(skb); + ret = pskb_expand_head(skb, extra, 0, GFP_ATOMIC); + if (ret) + return ret; + + new_headroom = skb_headroom(skb); + SKB_GSO_CB(skb)->mac_offset += (new_headroom - headroom); + return 0; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; -- cgit v1.2.3-18-g5258 From e4c1721642bbd42d8142f4811cde0588c28db51d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:25 +0000 Subject: xfrm: force a garbage collection after deleting a policy In some cases after deleting a policy from the SPD the policy would remain in the dst/flow/route cache for an extended period of time which caused problems for SELinux as its dynamic network access controls key off of the number of XFRM policy and state entries. This patch corrects this problem by forcing a XFRM garbage collection whenever a policy is sucessfully removed. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/xfrm.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/net/xfrm.h b/include/net/xfrm.h index ae16531d0d3..94ce082b29d 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1160,6 +1160,8 @@ static inline void xfrm_sk_free_policy(struct sock *sk) } } +extern void xfrm_garbage_collect(struct net *net); + #else static inline void xfrm_sk_free_policy(struct sock *sk) {} @@ -1194,6 +1196,9 @@ static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir, { return 1; } +static inline void xfrm_garbage_collect(struct net *net) +{ +} #endif static __inline__ -- cgit v1.2.3-18-g5258 From 6d7581e62f8be462440d7b22c6361f7c9fa4902b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:56 +0000 Subject: list: introduce list_first_entry_or_null non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/list.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/list.h b/include/linux/list.h index 6a1f8df9144..b83e5657365 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -361,6 +361,17 @@ static inline void list_splice_tail_init(struct list_head *list, #define list_first_entry(ptr, type, member) \ list_entry((ptr)->next, type, member) +/** + * list_first_entry_or_null - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null(ptr, type, member) \ + (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) + /** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. -- cgit v1.2.3-18-g5258 From c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 May 2013 09:06:27 +0000 Subject: net: force a reload of first item in hlist_nulls_for_each_entry_rcu Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin Signed-off-by: Eric Dumazet Reported-by: Boris Zhmurov Signed-off-by: Roman Gushchin Acked-by: Paul E. McKenney Signed-off-by: David S. Miller --- include/linux/rculist_nulls.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 2ae13714828..1c33dd7da4a 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -105,9 +105,14 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * @head: the head for your list. * @member: the name of the hlist_nulls_node within the struct. * + * The barrier() is needed to make sure compiler doesn't cache first element [1], + * as this loop can be restarted [2] + * [1] Documentation/atomic_ops.txt around line 114 + * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ + for (({barrier();}), \ + pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos))) -- cgit v1.2.3-18-g5258 From 01cb71d2d47b78354358e4bb938bb06323e17498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 13:55:05 +0000 Subject: net_sched: restore "overhead xxx" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Cc: Vimalkumar Cc: Jiri Pirko Signed-off-by: David S. Miller --- include/net/sch_generic.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f10818fc880..e7f4e21cc3e 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,22 +679,26 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, #endif struct psched_ratecfg { - u64 rate_bps; - u32 mult; - u32 shift; + u64 rate_bps; + u32 mult; + u16 overhead; + u8 shift; }; static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, unsigned int len) { - return ((u64)len * r->mult) >> r->shift; + return ((u64)(len + r->overhead) * r->mult) >> r->shift; } -extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf); -static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +static inline void psched_ratecfg_getrate(struct tc_ratespec *res, + const struct psched_ratecfg *r) { - return r->rate_bps >> 3; + memset(res, 0, sizeof(*res)); + res->rate = r->rate_bps >> 3; + res->overhead = r->overhead; } #endif -- cgit v1.2.3-18-g5258 From 8b94ca61d7065fa7fa7bdb08ce31a9385be5205b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 21 May 2013 04:16:28 -0300 Subject: [media] v4l2-mem2mem: add v4l2_m2m_create_bufs helper Signed-off-by: Philipp Zabel Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-mem2mem.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index d3eef01da64..0f4555b2a31 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -110,6 +110,8 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf); +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_exportbuffer *eb); -- cgit v1.2.3-18-g5258 From 066a1a5fca0e188c41636d0874ab7495f24f595b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 22 May 2013 12:29:22 +0100 Subject: KVM: add kvm_para_available to asm-generic/kvm_para.h According to include/uapi/linux/kvm_para.h architectures should define kvm_para_available, so add an implementation to asm-generic/kvm_para.h which just returns false. This fixes intel8x0.c build failure on mips with KVM enabled. Signed-off-by: James Hogan Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: Arnd Bergmann Signed-off-by: Gleb Natapov --- include/asm-generic/kvm_para.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/asm-generic/kvm_para.h b/include/asm-generic/kvm_para.h index 9d96605f160..fa25becbdca 100644 --- a/include/asm-generic/kvm_para.h +++ b/include/asm-generic/kvm_para.h @@ -18,4 +18,9 @@ static inline unsigned int kvm_arch_para_features(void) return 0; } +static inline bool kvm_para_available(void) +{ + return false; +} + #endif -- cgit v1.2.3-18-g5258 From 29eb77825cc7da8d45b642de2de3d423dc8a363f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 5 Jun 2013 12:26:50 +0200 Subject: arch, mm: Remove tlb_fast_mode() Since the introduction of preemptible mmu_gather TLB fast mode has been broken. TLB fast mode relies on there being absolutely no concurrency; it frees pages first and invalidates TLBs later. However now we can get concurrency and stuff goes *bang*. This patch removes all tlb_fast_mode() code; it was found the better option vs trying to patch the hole by entangling tlb invalidation with the scheduler. Cc: Thomas Gleixner Cc: Russell King Cc: Tony Luck Reported-by: Max Filippov Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- include/asm-generic/tlb.h | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'include') diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index b1b1fa6ffff..13821c339a4 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -97,11 +97,9 @@ struct mmu_gather { unsigned long start; unsigned long end; unsigned int need_flush : 1, /* Did free PTEs */ - fast_mode : 1; /* No batching */ - /* we are in the middle of an operation to clear * a full mm and can make some optimizations */ - unsigned int fullmm : 1, + fullmm : 1, /* we have performed an operation which * requires a complete flush of the tlb */ need_flush_all : 1; @@ -114,19 +112,6 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -static inline int tlb_fast_mode(struct mmu_gather *tlb) -{ -#ifdef CONFIG_SMP - return tlb->fast_mode; -#else - /* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ - return 1; -#endif -} - void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, -- cgit v1.2.3-18-g5258 From a7526eb5d06b0084ef12d7b168d008fcf516caab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 5 Jun 2013 19:38:26 +0000 Subject: net: Unbreak compat_sys_{send,recv}msg I broke them in this commit: commit 1be374a0518a288147c6a7398792583200a67261 Author: Andy Lutomirski Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: Andy Lutomirski Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/socket.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/socket.h b/include/linux/socket.h index 33bf2dfab19..b10ce4b341e 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; +/* The __sys_...msg variants allow MSG_CMSG_COMPAT */ +extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags); +extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, -- cgit v1.2.3-18-g5258 From 4616274d3382fa7698536d61b351e63cf0ce27f0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Jun 2013 19:36:11 +0100 Subject: ASoC: dapm: Treat DAI widgets like AIF widgets for power Even though they are virtual widgets DAI widgets still get counted for the DAPM context power management so we can't just use the active state to check if they should be powered as they may not be part of a complete path. Instead split them into input and output widgets and do the same power checks as we perform on AIFs. Reported-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d4609029f01..385c6329a96 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -450,7 +450,8 @@ enum snd_soc_dapm_type { snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ - snd_soc_dapm_dai, /* link to DAI structure */ + snd_soc_dapm_dai_in, /* link to DAI structure */ + snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ }; -- cgit v1.2.3-18-g5258 From d62840995a99c9766803d54e9d7923f247a1c1db Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 22 May 2013 02:41:36 -0700 Subject: trace: Allow idle-safe tracepoints to be called from irq __DECLARE_TRACE_RCU() currently creates an _rcuidle() tracepoint which may safely be invoked from what RCU considers to be an idle CPU. However, these _rcuidle() tracepoints may -not- be invoked from the handler of an irq taken from idle, because rcu_idle_enter() zeroes RCU's nesting-level counter, so that the rcu_irq_exit() returning to idle will trigger a WARN_ON_ONCE(). This commit therefore substitutes rcu_irq_enter() for rcu_idle_exit() and rcu_irq_exit() for rcu_idle_enter() in order to make the _rcuidle() tracepoints usable from irq handlers as well as from process context. Reported-by: Dave Jones Signed-off-by: Paul E. McKenney Cc: Steven Rostedt --- include/linux/tracepoint.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 2f322c38bd4..f8e084d0fc7 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -145,8 +145,8 @@ static inline void tracepoint_synchronize_unregister(void) TP_PROTO(data_proto), \ TP_ARGS(data_args), \ TP_CONDITION(cond), \ - rcu_idle_exit(), \ - rcu_idle_enter()); \ + rcu_irq_enter(), \ + rcu_irq_exit()); \ } #else #define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) -- cgit v1.2.3-18-g5258 From ed13998c319b050fc9abdb73915859dfdbe1fb38 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 5 Jun 2013 15:30:55 +0200 Subject: sock_diag: fix filter code sent to userspace Filters need to be translated to real BPF code for userland, like SO_GETFILTER. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- include/linux/filter.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/filter.h b/include/linux/filter.h index c050dcc322a..f65f5a69db8 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -46,6 +46,7 @@ extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); +extern void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to); #ifdef CONFIG_BPF_JIT #include -- cgit v1.2.3-18-g5258 From 2a8fedd0c142d4328ab4667847e05afe17c3295c Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 10 Jun 2013 12:33:47 -0700 Subject: kvm: Add definition of KVM_REG_MIPS We use 0x7000000000000000ULL as 0x6000000000000000ULL is reserved for ARM64. Signed-off-by: David Daney Signed-off-by: Gleb Natapov --- include/uapi/linux/kvm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index a5c86fc34a3..d88c8ee00c8 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -783,6 +783,7 @@ struct kvm_dirty_tlb { #define KVM_REG_IA64 0x3000000000000000ULL #define KVM_REG_ARM 0x4000000000000000ULL #define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL -- cgit v1.2.3-18-g5258 From b79462a8b9f9a452edc20c64a70a89ba3b0a6a88 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:55 +0200 Subject: team: fix checks in team_get_first_port_txable_rcu() should be checked if "cur" is txable, not "port". Introduced by commit 6e88e1357c "team: use function team_port_txable() for determing enabled and up port" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if_team.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 4474557904f..16fae6436d0 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -249,12 +249,12 @@ team_get_first_port_txable_rcu(struct team *team, struct team_port *port) return port; cur = port; list_for_each_entry_continue_rcu(cur, &team->port_list, list) - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; list_for_each_entry_rcu(cur, &team->port_list, list) { if (cur == port) break; - if (team_port_txable(port)) + if (team_port_txable(cur)) return cur; } return NULL; -- cgit v1.2.3-18-g5258 From 96570ffcca0b872dc8626e97569d2697f374d868 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 29 May 2013 09:51:29 +0300 Subject: Bluetooth: Fix mgmt handling of power on failures If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan Signed-off-by: John W. Linville --- include/net/bluetooth/hci_core.h | 1 + include/net/bluetooth/mgmt.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 35a57cd1704..7cb6d360d14 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1117,6 +1117,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event); int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len); int mgmt_index_added(struct hci_dev *hdev); int mgmt_index_removed(struct hci_dev *hdev); +int mgmt_set_powered_failed(struct hci_dev *hdev, int err); int mgmt_powered(struct hci_dev *hdev, u8 powered); int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 22980a7c387..9944c3e68c5 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -42,6 +42,7 @@ #define MGMT_STATUS_NOT_POWERED 0x0f #define MGMT_STATUS_CANCELLED 0x10 #define MGMT_STATUS_INVALID_INDEX 0x11 +#define MGMT_STATUS_RFKILLED 0x12 struct mgmt_hdr { __le16 opcode; -- cgit v1.2.3-18-g5258 From 16e53dbf10a2d7e228709a7286310e629ede5e45 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Wed, 12 Jun 2013 14:04:36 -0700 Subject: CPU hotplug: provide a generic helper to disable/enable CPU hotplug There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Robin Holt Cc: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Shawn Guo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpu.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/cpu.h b/include/linux/cpu.h index c6f6e0839b6..9f3c7e81270 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys; extern void get_online_cpus(void); extern void put_online_cpus(void); +extern void cpu_hotplug_disable(void); +extern void cpu_hotplug_enable(void); #define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri) #define register_hotcpu_notifier(nb) register_cpu_notifier(nb) #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb) @@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void) #define get_online_cpus() do { } while (0) #define put_online_cpus() do { } while (0) +#define cpu_hotplug_disable() do { } while (0) +#define cpu_hotplug_enable() do { } while (0) #define hotcpu_notifier(fn, pri) do { (void)(fn); } while (0) /* These aren't inline functions due to a GCC bug. */ #define register_hotcpu_notifier(nb) ({ (void)(nb); 0; }) -- cgit v1.2.3-18-g5258 From 637241a900cbd982f744d44646b48a273d609b34 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 12 Jun 2013 14:04:39 -0700 Subject: kmsg: honor dmesg_restrict sysctl on /dev/kmsg The dmesg_restrict sysctl currently covers the syslog method for access dmesg, however /dev/kmsg isn't covered by the same protections. Most people haven't noticed because util-linux dmesg(1) defaults to using the syslog method for access in older versions. With util-linux dmesg(1) defaults to reading directly from /dev/kmsg. To fix /dev/kmsg, let's compare the existing interfaces and what they allow: - /proc/kmsg allows: - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive single-reader interface (SYSLOG_ACTION_READ). - everything, after an open. - syslog syscall allows: - anything, if CAP_SYSLOG. - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if dmesg_restrict==0. - nothing else (EPERM). The use-cases were: - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs. - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the destructive SYSLOG_ACTION_READs. AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't clear the ring buffer. Based on the comments in devkmsg_llseek, it sounds like actions besides reading aren't going to be supported by /dev/kmsg (i.e. SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive syslog syscall actions. To this end, move the check as Josh had done, but also rename the constants to reflect their new uses (SYSLOG_FROM_CALL becomes SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC). SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC allows destructive actions after a capabilities-constrained SYSLOG_ACTION_OPEN check. - /dev/kmsg allows: - open if CAP_SYSLOG or dmesg_restrict==0 - reading/polling, after open Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192 [akpm@linux-foundation.org: use pr_warn_once()] Signed-off-by: Kees Cook Reported-by: Christian Kujau Tested-by: Josh Boyer Cc: Kay Sievers Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/syslog.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/syslog.h b/include/linux/syslog.h index 38911391a13..98a3153c0f9 100644 --- a/include/linux/syslog.h +++ b/include/linux/syslog.h @@ -44,8 +44,8 @@ /* Return size of the log buffer */ #define SYSLOG_ACTION_SIZE_BUFFER 10 -#define SYSLOG_FROM_CALL 0 -#define SYSLOG_FROM_FILE 1 +#define SYSLOG_FROM_READER 0 +#define SYSLOG_FROM_PROC 1 int do_syslog(int type, char __user *buf, int count, bool from_file); -- cgit v1.2.3-18-g5258 From 30dad30922ccc733cfdbfe232090cf674dc374dc Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Wed, 12 Jun 2013 14:05:04 -0700 Subject: mm: migration: add migrate_entry_wait_huge() When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by: Naoya Horiguchi Reviewed-by: Rik van Riel Reviewed-by: Wanpeng Li Reviewed-by: Michal Hocko Cc: Mel Gorman Cc: Andi Kleen Cc: KOSAKI Motohiro Cc: [2.6.35+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swapops.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 47ead515c81..c5fd30d2a41 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -137,6 +137,7 @@ static inline void make_migration_entry_read(swp_entry_t *entry) extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address); +extern void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte); #else #define make_migration_entry(page, write) swp_entry(0, 0) @@ -148,6 +149,8 @@ static inline int is_migration_entry(swp_entry_t swp) static inline void make_migration_entry_read(swp_entry_t *entryp) { } static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd, unsigned long address) { } +static inline void migration_entry_wait_huge(struct mm_struct *mm, + pte_t *pte) { } static inline int is_write_migration_entry(swp_entry_t entry) { return 0; -- cgit v1.2.3-18-g5258 From c2853c8df57f49620d26f317d7d43347c29bfc2e Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Wed, 12 Jun 2013 14:05:10 -0700 Subject: include/linux/math64.h: add div64_ul() There is div64_long() to handle the s64/long division, but no mocro do u64/ul division. It is necessary in some scenarios, so add this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Shi Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/math64.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/math64.h b/include/linux/math64.h index b8ba8554472..2913b86eb12 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -6,7 +6,8 @@ #if BITS_PER_LONG == 64 -#define div64_long(x,y) div64_s64((x),(y)) +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder @@ -47,7 +48,8 @@ static inline s64 div64_s64(s64 dividend, s64 divisor) #elif BITS_PER_LONG == 32 -#define div64_long(x,y) div_s64((x),(y)) +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) -- cgit v1.2.3-18-g5258 From d3b6f6141831b6e2d414edea6cc7af5b9bc6fac2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 7 Jun 2013 13:26:05 -0700 Subject: ip_tunnel: remove __net_init/exit from exported functions If CONFIG_NET_NS is not set then __net_init is the same as __init and __net_exit is the same as __exit. These functions will be removed from memory after the module loads or is removed. Functions that are exported for use by other functions should never be labeled for removal. Bug introduced by commit c54419321455631079c ("GRE: Refactor GRE tunneling code.") Reported-by: Steinar H. Gunderson Signed-off-by: Steven Rostedt Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/ip_tunnels.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 4b6f0b28f41..09b1360e10b 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -95,10 +95,10 @@ struct ip_tunnel_net { int ip_tunnel_init(struct net_device *dev); void ip_tunnel_uninit(struct net_device *dev); void ip_tunnel_dellink(struct net_device *dev, struct list_head *head); -int __net_init ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, - struct rtnl_link_ops *ops, char *devname); +int ip_tunnel_init_net(struct net *net, int ip_tnl_net_id, + struct rtnl_link_ops *ops, char *devname); -void __net_exit ip_tunnel_delete_net(struct ip_tunnel_net *itn); +void ip_tunnel_delete_net(struct ip_tunnel_net *itn); void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params); -- cgit v1.2.3-18-g5258 From f21afc25f9ed45b8ffe200d0f071b0caec3ed2ef Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 14 Jun 2013 11:13:59 -0700 Subject: smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). Thanks to commit f91eb62f71b3 ("init: scream bloody murder if interrupts are enabled too early"), "bloody murder" is now being screamed. With a MIPS OCTEON config, we use on_each_cpu() in our irq_chip.irq_bus_sync_unlock() function. This gets called in early as a result of the time_init() call. Because the !SMP version of on_each_cpu() unconditionally enables irqs, we get: WARNING: at init/main.c:560 start_kernel+0x250/0x410() Interrupts were enabled early CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc5-Cavium-Octeon+ #801 Call Trace: show_stack+0x68/0x80 warn_slowpath_common+0x78/0xb0 warn_slowpath_fmt+0x38/0x48 start_kernel+0x250/0x410 Suggested fix: Do what we already do in the SMP version of on_each_cpu(), and use local_irq_save/local_irq_restore. Because we need a flags variable, make it a static inline to avoid name space issues. [ Change from v1: Convert on_each_cpu to a static inline function, add #include to avoid build breakage on some files. on_each_cpu_mask() and on_each_cpu_cond() suffer the same problem as on_each_cpu(), but they are not causing !SMP bugs for me, so I will defer changing them to a less urgent patch. ] Signed-off-by: David Daney Cc: Ralf Baechle Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/smp.h | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/smp.h b/include/linux/smp.h index e6564c1dc55..c8488763277 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -11,6 +11,7 @@ #include #include #include +#include extern void cpu_idle(void); @@ -139,13 +140,17 @@ static inline int up_smp_call_function(smp_call_func_t func, void *info) } #define smp_call_function(func, info, wait) \ (up_smp_call_function(func, info)) -#define on_each_cpu(func,info,wait) \ - ({ \ - local_irq_disable(); \ - func(info); \ - local_irq_enable(); \ - 0; \ - }) + +static inline int on_each_cpu(smp_call_func_t func, void *info, int wait) +{ + unsigned long flags; + + local_irq_save(flags); + func(info); + local_irq_restore(flags); + return 0; +} + /* * Note we still need to test the mask even for UP * because we actually can get an empty mask from -- cgit v1.2.3-18-g5258 From 29bb9e5a75684106a37593ad75ec75ff8312731b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 24 May 2013 15:23:40 -0400 Subject: tracing/context-tracking: Add preempt_schedule_context() for tracing Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [] dump_stack+0x19/0x1b [] lockdep_rcu_suspicious+0xfd/0x130 [] cpuacct_charge+0x185/0x1f0 [] ? cpuacct_charge+0x5/0x1f0 [] update_curr+0xec/0x240 [] put_prev_task_fair+0x228/0x480 [] __schedule+0x161/0x9b0 [] preempt_schedule+0x51/0x80 [] ? __cond_resched_softirq+0x60/0x60 [] ? retint_careful+0x12/0x2e [] ftrace_ops_control_func+0x1dc/0x210 [] ftrace_call+0x5/0x2f [] ? retint_careful+0xb/0x2e [] ? schedule_user+0x5/0x70 [] ? schedule_user+0x5/0x70 [] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1369423420.6828.226.camel@gandalf.local.home Signed-off-by: Ingo Molnar --- include/linux/preempt.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 87a03c746f1..f5d4723cdb3 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -33,9 +33,25 @@ do { \ preempt_schedule(); \ } while (0) +#ifdef CONFIG_CONTEXT_TRACKING + +void preempt_schedule_context(void); + +#define preempt_check_resched_context() \ +do { \ + if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \ + preempt_schedule_context(); \ +} while (0) +#else + +#define preempt_check_resched_context() preempt_check_resched() + +#endif /* CONFIG_CONTEXT_TRACKING */ + #else /* !CONFIG_PREEMPT */ #define preempt_check_resched() do { } while (0) +#define preempt_check_resched_context() do { } while (0) #endif /* CONFIG_PREEMPT */ @@ -88,7 +104,7 @@ do { \ do { \ preempt_enable_no_resched_notrace(); \ barrier(); \ - preempt_check_resched(); \ + preempt_check_resched_context(); \ } while (0) #else /* !CONFIG_PREEMPT_COUNT */ -- cgit v1.2.3-18-g5258 From b9e95fc65ededbec083aa91b4faa58ad992c0891 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jun 2013 00:45:34 +0200 Subject: ACPI / LPSS: Power up LPSS devices during enumeration Commit 7cd8407 (ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization) introduced a regression on some systems with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices need to be powered up during initialization, but their device objects in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power resources). To work around this problem, make the ACPI LPSS driver power up devices it knows about by using a new helper function acpi_device_fix_up_power() that does all of the necessary sanity checks and calls acpi_dev_pm_explicit_set() to put the device into D0. Reported-and-tested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki --- include/acpi/acpi_bus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 636c59f2003..c13c919ab99 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -382,6 +382,7 @@ const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); +int acpi_device_fix_up_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); -- cgit v1.2.3-18-g5258 From 7995bd287134f6c8f80d94bebe7396f05a9bc42b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Jun 2013 18:58:36 +0400 Subject: splice: don't pass the address of ->f_pos to methods Signed-off-by: Al Viro --- include/linux/fs.h | 2 -- include/linux/splice.h | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/fs.h b/include/linux/fs.h index 43db02e9c9f..65c2be22b60 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2414,8 +2414,6 @@ extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); -extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, - size_t len, unsigned int flags); extern void file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping); diff --git a/include/linux/splice.h b/include/linux/splice.h index 09a545a7dfa..74575cbf2d6 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -35,6 +35,7 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + loff_t *opos; /* sendfile: output position */ size_t num_spliced; /* number of bytes already spliced */ bool need_wakeup; /* need to wake up writer */ }; -- cgit v1.2.3-18-g5258