From 49148020bcb6910ce71417bd990a5ce7017f9bd3 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 16 Jan 2009 21:58:10 +1000 Subject: m68k,m68knommu: merge header files Merge header files for m68k and m68knommu to the single location: arch/m68k/include/asm The majority of this patch was the result of the script that is included in the changelog below. The script was originally written by Arnd Bergman and exten by me to cover a few more files. When the header files differed the script uses the following: The original m68k file is named _mm.h [mm for memory manager] The m68knommu file is named _no.h [no for no memory manager] The files uses the following include guard: This include gaurd works as the m68knommu toolchain set the __uClinux__ symbol - so this should work in userspace too. Merging the header files for m68k and m68knommu exposes the (unexpected?) ABI differences thus it is easier to actually identify these and thus to fix them. The commit has been build tested with both a m68k and a m68knommu toolchain - with success. The commit has also been tested with "make headers_check" and this patch fixes make headers_check for m68knommu. The script used: TARGET=arch/m68k/include/asm SOURCE=arch/m68knommu/include/asm INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \ linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \ oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \ shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \ termbits.h termios.h tlb.h types.h user.h" EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \ ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \ sections.h topology.h" NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \ elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \ m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \ m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \ m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \ mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \ mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \ nettel.h quicc_simple.h smp.h" FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \ cacheflush.h checksum.h current.h delay.h div64.h \ dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \ irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \ module.h page.h page_offset.h param.h pci.h pgalloc.h \ pgtable.h processor.h ptrace.h scatterlist.h segment.h \ setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \ thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \ unaligned.h unistd.h" mergefile() { BASE=${1%.h} git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h cat << EOF > ${TARGET}/$1 EOF git add ${TARGET}/$1 } set -e mkdir -p ${TARGET} git mv include/asm-m68k/* ${TARGET} rmdir include/asm-m68k git rm ${SOURCE}/Kbuild for F in $INCLUDE $EQUAL; do git rm ${SOURCE}/$F done for F in $NOMUUFILES; do git mv ${SOURCE}/$F ${TARGET}/$F done for F in $FILES ; do mergefile $F done rmdir arch/m68knommu/include/asm rmdir arch/m68knommu/include Cc: Arnd Bergmann Cc: Geert Uytterhoeven Signed-off-by: Sam Ravnborg Signed-off-by: Greg Ungerer --- include/asm-m68k/Kbuild | 3 - include/asm-m68k/a.out-core.h | 67 --- include/asm-m68k/a.out.h | 20 - include/asm-m68k/adb_iop.h | 44 -- include/asm-m68k/amigahw.h | 350 --------------- include/asm-m68k/amigaints.h | 113 ----- include/asm-m68k/amigayle.h | 107 ----- include/asm-m68k/amipcmcia.h | 110 ----- include/asm-m68k/apollodma.h | 248 ----------- include/asm-m68k/apollohw.h | 108 ----- include/asm-m68k/atafd.h | 12 - include/asm-m68k/atafdreg.h | 79 ---- include/asm-m68k/atari_joystick.h | 22 - include/asm-m68k/atari_stdma.h | 22 - include/asm-m68k/atari_stram.h | 17 - include/asm-m68k/atarihw.h | 807 ----------------------------------- include/asm-m68k/atariints.h | 204 --------- include/asm-m68k/atarikb.h | 46 -- include/asm-m68k/atomic.h | 196 --------- include/asm-m68k/auxvec.h | 4 - include/asm-m68k/bitops.h | 464 -------------------- include/asm-m68k/blinken.h | 32 -- include/asm-m68k/bootinfo.h | 378 ---------------- include/asm-m68k/bug.h | 29 -- include/asm-m68k/bugs.h | 14 - include/asm-m68k/bvme6000hw.h | 150 ------- include/asm-m68k/byteorder.h | 7 - include/asm-m68k/cache.h | 11 - include/asm-m68k/cachectl.h | 14 - include/asm-m68k/cacheflush.h | 156 ------- include/asm-m68k/checksum.h | 148 ------- include/asm-m68k/contregs.h | 53 --- include/asm-m68k/cputime.h | 6 - include/asm-m68k/current.h | 6 - include/asm-m68k/delay.h | 57 --- include/asm-m68k/device.h | 7 - include/asm-m68k/div64.h | 28 -- include/asm-m68k/dma-mapping.h | 112 ----- include/asm-m68k/dma.h | 16 - include/asm-m68k/dsp56k.h | 35 -- include/asm-m68k/dvma.h | 240 ----------- include/asm-m68k/elf.h | 119 ------ include/asm-m68k/emergency-restart.h | 6 - include/asm-m68k/entry.h | 137 ------ include/asm-m68k/errno.h | 6 - include/asm-m68k/fb.h | 34 -- include/asm-m68k/fbio.h | 330 -------------- include/asm-m68k/fcntl.h | 11 - include/asm-m68k/floppy.h | 254 ----------- include/asm-m68k/fpu.h | 21 - include/asm-m68k/futex.h | 6 - include/asm-m68k/hardirq.h | 16 - include/asm-m68k/hp300hw.h | 25 -- include/asm-m68k/hw_irq.h | 6 - include/asm-m68k/hwtest.h | 15 - include/asm-m68k/ide.h | 130 ------ include/asm-m68k/idprom.h | 27 -- include/asm-m68k/intersil.h | 48 --- include/asm-m68k/io.h | 369 ---------------- include/asm-m68k/ioctl.h | 1 - include/asm-m68k/ioctls.h | 84 ---- include/asm-m68k/ipcbuf.h | 29 -- include/asm-m68k/irq.h | 125 ------ include/asm-m68k/irq_regs.h | 1 - include/asm-m68k/kdebug.h | 1 - include/asm-m68k/kmap_types.h | 21 - include/asm-m68k/linkage.h | 7 - include/asm-m68k/local.h | 6 - include/asm-m68k/mac_asc.h | 27 -- include/asm-m68k/mac_baboon.h | 32 -- include/asm-m68k/mac_iop.h | 162 ------- include/asm-m68k/mac_mouse.h | 23 - include/asm-m68k/mac_oss.h | 94 ---- include/asm-m68k/mac_psc.h | 248 ----------- include/asm-m68k/mac_via.h | 267 ------------ include/asm-m68k/machdep.h | 35 -- include/asm-m68k/machines.h | 85 ---- include/asm-m68k/machw.h | 49 --- include/asm-m68k/macintosh.h | 135 ------ include/asm-m68k/macints.h | 155 ------- include/asm-m68k/math-emu.h | 315 -------------- include/asm-m68k/mc146818rtc.h | 26 -- include/asm-m68k/md.h | 13 - include/asm-m68k/mman.h | 17 - include/asm-m68k/mmu.h | 7 - include/asm-m68k/mmu_context.h | 154 ------- include/asm-m68k/mmzone.h | 9 - include/asm-m68k/module.h | 39 -- include/asm-m68k/motorola_pgalloc.h | 109 ----- include/asm-m68k/motorola_pgtable.h | 291 ------------- include/asm-m68k/movs.h | 55 --- include/asm-m68k/msgbuf.h | 31 -- include/asm-m68k/mutex.h | 9 - include/asm-m68k/mvme147hw.h | 113 ----- include/asm-m68k/mvme16xhw.h | 111 ----- include/asm-m68k/nubus.h | 46 -- include/asm-m68k/openprom.h | 312 -------------- include/asm-m68k/oplib.h | 291 ------------- include/asm-m68k/page.h | 228 ---------- include/asm-m68k/page_offset.h | 8 - include/asm-m68k/param.h | 22 - include/asm-m68k/parport.h | 26 -- include/asm-m68k/pci.h | 12 - include/asm-m68k/percpu.h | 6 - include/asm-m68k/pgalloc.h | 19 - include/asm-m68k/pgtable.h | 166 ------- include/asm-m68k/poll.h | 9 - include/asm-m68k/posix_types.h | 61 --- include/asm-m68k/processor.h | 130 ------ include/asm-m68k/ptrace.h | 80 ---- include/asm-m68k/q40_master.h | 69 --- include/asm-m68k/q40ints.h | 29 -- include/asm-m68k/raw_io.h | 347 --------------- include/asm-m68k/resource.h | 6 - include/asm-m68k/rtc.h | 76 ---- include/asm-m68k/sbus.h | 45 -- include/asm-m68k/scatterlist.h | 23 - include/asm-m68k/sections.h | 6 - include/asm-m68k/segment.h | 57 --- include/asm-m68k/sembuf.h | 25 -- include/asm-m68k/serial.h | 33 -- include/asm-m68k/setup.h | 376 ---------------- include/asm-m68k/shm.h | 31 -- include/asm-m68k/shmbuf.h | 42 -- include/asm-m68k/shmparam.h | 6 - include/asm-m68k/sigcontext.h | 19 - include/asm-m68k/siginfo.h | 92 ---- include/asm-m68k/signal.h | 206 --------- include/asm-m68k/socket.h | 57 --- include/asm-m68k/sockios.h | 13 - include/asm-m68k/spinlock.h | 6 - include/asm-m68k/stat.h | 77 ---- include/asm-m68k/statfs.h | 6 - include/asm-m68k/string.h | 131 ------ include/asm-m68k/sun3-head.h | 10 - include/asm-m68k/sun3_pgalloc.h | 102 ----- include/asm-m68k/sun3_pgtable.h | 234 ---------- include/asm-m68k/sun3ints.h | 37 -- include/asm-m68k/sun3mmu.h | 171 -------- include/asm-m68k/sun3x.h | 27 -- include/asm-m68k/sun3xflop.h | 263 ------------ include/asm-m68k/sun3xprom.h | 43 -- include/asm-m68k/suspend.h | 6 - include/asm-m68k/swab.h | 16 - include/asm-m68k/system.h | 218 ---------- include/asm-m68k/termbits.h | 200 --------- include/asm-m68k/termios.h | 92 ---- include/asm-m68k/thread_info.h | 57 --- include/asm-m68k/timex.h | 18 - include/asm-m68k/tlb.h | 20 - include/asm-m68k/tlbflush.h | 219 ---------- include/asm-m68k/topology.h | 6 - include/asm-m68k/traps.h | 272 ------------ include/asm-m68k/types.h | 37 -- include/asm-m68k/uaccess.h | 374 ---------------- include/asm-m68k/ucontext.h | 30 -- include/asm-m68k/unaligned.h | 13 - include/asm-m68k/unistd.h | 374 ---------------- include/asm-m68k/user.h | 86 ---- include/asm-m68k/virtconvert.h | 48 --- include/asm-m68k/xor.h | 1 - include/asm-m68k/zorro.h | 45 -- 162 files changed, 15201 deletions(-) delete mode 100644 include/asm-m68k/Kbuild delete mode 100644 include/asm-m68k/a.out-core.h delete mode 100644 include/asm-m68k/a.out.h delete mode 100644 include/asm-m68k/adb_iop.h delete mode 100644 include/asm-m68k/amigahw.h delete mode 100644 include/asm-m68k/amigaints.h delete mode 100644 include/asm-m68k/amigayle.h delete mode 100644 include/asm-m68k/amipcmcia.h delete mode 100644 include/asm-m68k/apollodma.h delete mode 100644 include/asm-m68k/apollohw.h delete mode 100644 include/asm-m68k/atafd.h delete mode 100644 include/asm-m68k/atafdreg.h delete mode 100644 include/asm-m68k/atari_joystick.h delete mode 100644 include/asm-m68k/atari_stdma.h delete mode 100644 include/asm-m68k/atari_stram.h delete mode 100644 include/asm-m68k/atarihw.h delete mode 100644 include/asm-m68k/atariints.h delete mode 100644 include/asm-m68k/atarikb.h delete mode 100644 include/asm-m68k/atomic.h delete mode 100644 include/asm-m68k/auxvec.h delete mode 100644 include/asm-m68k/bitops.h delete mode 100644 include/asm-m68k/blinken.h delete mode 100644 include/asm-m68k/bootinfo.h delete mode 100644 include/asm-m68k/bug.h delete mode 100644 include/asm-m68k/bugs.h delete mode 100644 include/asm-m68k/bvme6000hw.h delete mode 100644 include/asm-m68k/byteorder.h delete mode 100644 include/asm-m68k/cache.h delete mode 100644 include/asm-m68k/cachectl.h delete mode 100644 include/asm-m68k/cacheflush.h delete mode 100644 include/asm-m68k/checksum.h delete mode 100644 include/asm-m68k/contregs.h delete mode 100644 include/asm-m68k/cputime.h delete mode 100644 include/asm-m68k/current.h delete mode 100644 include/asm-m68k/delay.h delete mode 100644 include/asm-m68k/device.h delete mode 100644 include/asm-m68k/div64.h delete mode 100644 include/asm-m68k/dma-mapping.h delete mode 100644 include/asm-m68k/dma.h delete mode 100644 include/asm-m68k/dsp56k.h delete mode 100644 include/asm-m68k/dvma.h delete mode 100644 include/asm-m68k/elf.h delete mode 100644 include/asm-m68k/emergency-restart.h delete mode 100644 include/asm-m68k/entry.h delete mode 100644 include/asm-m68k/errno.h delete mode 100644 include/asm-m68k/fb.h delete mode 100644 include/asm-m68k/fbio.h delete mode 100644 include/asm-m68k/fcntl.h delete mode 100644 include/asm-m68k/floppy.h delete mode 100644 include/asm-m68k/fpu.h delete mode 100644 include/asm-m68k/futex.h delete mode 100644 include/asm-m68k/hardirq.h delete mode 100644 include/asm-m68k/hp300hw.h delete mode 100644 include/asm-m68k/hw_irq.h delete mode 100644 include/asm-m68k/hwtest.h delete mode 100644 include/asm-m68k/ide.h delete mode 100644 include/asm-m68k/idprom.h delete mode 100644 include/asm-m68k/intersil.h delete mode 100644 include/asm-m68k/io.h delete mode 100644 include/asm-m68k/ioctl.h delete mode 100644 include/asm-m68k/ioctls.h delete mode 100644 include/asm-m68k/ipcbuf.h delete mode 100644 include/asm-m68k/irq.h delete mode 100644 include/asm-m68k/irq_regs.h delete mode 100644 include/asm-m68k/kdebug.h delete mode 100644 include/asm-m68k/kmap_types.h delete mode 100644 include/asm-m68k/linkage.h delete mode 100644 include/asm-m68k/local.h delete mode 100644 include/asm-m68k/mac_asc.h delete mode 100644 include/asm-m68k/mac_baboon.h delete mode 100644 include/asm-m68k/mac_iop.h delete mode 100644 include/asm-m68k/mac_mouse.h delete mode 100644 include/asm-m68k/mac_oss.h delete mode 100644 include/asm-m68k/mac_psc.h delete mode 100644 include/asm-m68k/mac_via.h delete mode 100644 include/asm-m68k/machdep.h delete mode 100644 include/asm-m68k/machines.h delete mode 100644 include/asm-m68k/machw.h delete mode 100644 include/asm-m68k/macintosh.h delete mode 100644 include/asm-m68k/macints.h delete mode 100644 include/asm-m68k/math-emu.h delete mode 100644 include/asm-m68k/mc146818rtc.h delete mode 100644 include/asm-m68k/md.h delete mode 100644 include/asm-m68k/mman.h delete mode 100644 include/asm-m68k/mmu.h delete mode 100644 include/asm-m68k/mmu_context.h delete mode 100644 include/asm-m68k/mmzone.h delete mode 100644 include/asm-m68k/module.h delete mode 100644 include/asm-m68k/motorola_pgalloc.h delete mode 100644 include/asm-m68k/motorola_pgtable.h delete mode 100644 include/asm-m68k/movs.h delete mode 100644 include/asm-m68k/msgbuf.h delete mode 100644 include/asm-m68k/mutex.h delete mode 100644 include/asm-m68k/mvme147hw.h delete mode 100644 include/asm-m68k/mvme16xhw.h delete mode 100644 include/asm-m68k/nubus.h delete mode 100644 include/asm-m68k/openprom.h delete mode 100644 include/asm-m68k/oplib.h delete mode 100644 include/asm-m68k/page.h delete mode 100644 include/asm-m68k/page_offset.h delete mode 100644 include/asm-m68k/param.h delete mode 100644 include/asm-m68k/parport.h delete mode 100644 include/asm-m68k/pci.h delete mode 100644 include/asm-m68k/percpu.h delete mode 100644 include/asm-m68k/pgalloc.h delete mode 100644 include/asm-m68k/pgtable.h delete mode 100644 include/asm-m68k/poll.h delete mode 100644 include/asm-m68k/posix_types.h delete mode 100644 include/asm-m68k/processor.h delete mode 100644 include/asm-m68k/ptrace.h delete mode 100644 include/asm-m68k/q40_master.h delete mode 100644 include/asm-m68k/q40ints.h delete mode 100644 include/asm-m68k/raw_io.h delete mode 100644 include/asm-m68k/resource.h delete mode 100644 include/asm-m68k/rtc.h delete mode 100644 include/asm-m68k/sbus.h delete mode 100644 include/asm-m68k/scatterlist.h delete mode 100644 include/asm-m68k/sections.h delete mode 100644 include/asm-m68k/segment.h delete mode 100644 include/asm-m68k/sembuf.h delete mode 100644 include/asm-m68k/serial.h delete mode 100644 include/asm-m68k/setup.h delete mode 100644 include/asm-m68k/shm.h delete mode 100644 include/asm-m68k/shmbuf.h delete mode 100644 include/asm-m68k/shmparam.h delete mode 100644 include/asm-m68k/sigcontext.h delete mode 100644 include/asm-m68k/siginfo.h delete mode 100644 include/asm-m68k/signal.h delete mode 100644 include/asm-m68k/socket.h delete mode 100644 include/asm-m68k/sockios.h delete mode 100644 include/asm-m68k/spinlock.h delete mode 100644 include/asm-m68k/stat.h delete mode 100644 include/asm-m68k/statfs.h delete mode 100644 include/asm-m68k/string.h delete mode 100644 include/asm-m68k/sun3-head.h delete mode 100644 include/asm-m68k/sun3_pgalloc.h delete mode 100644 include/asm-m68k/sun3_pgtable.h delete mode 100644 include/asm-m68k/sun3ints.h delete mode 100644 include/asm-m68k/sun3mmu.h delete mode 100644 include/asm-m68k/sun3x.h delete mode 100644 include/asm-m68k/sun3xflop.h delete mode 100644 include/asm-m68k/sun3xprom.h delete mode 100644 include/asm-m68k/suspend.h delete mode 100644 include/asm-m68k/swab.h delete mode 100644 include/asm-m68k/system.h delete mode 100644 include/asm-m68k/termbits.h delete mode 100644 include/asm-m68k/termios.h delete mode 100644 include/asm-m68k/thread_info.h delete mode 100644 include/asm-m68k/timex.h delete mode 100644 include/asm-m68k/tlb.h delete mode 100644 include/asm-m68k/tlbflush.h delete mode 100644 include/asm-m68k/topology.h delete mode 100644 include/asm-m68k/traps.h delete mode 100644 include/asm-m68k/types.h delete mode 100644 include/asm-m68k/uaccess.h delete mode 100644 include/asm-m68k/ucontext.h delete mode 100644 include/asm-m68k/unaligned.h delete mode 100644 include/asm-m68k/unistd.h delete mode 100644 include/asm-m68k/user.h delete mode 100644 include/asm-m68k/virtconvert.h delete mode 100644 include/asm-m68k/xor.h delete mode 100644 include/asm-m68k/zorro.h (limited to 'include') diff --git a/include/asm-m68k/Kbuild b/include/asm-m68k/Kbuild deleted file mode 100644 index 52fd96b4142..00000000000 --- a/include/asm-m68k/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm -header-y += cachectl.h -unifdef-y += swab.h diff --git a/include/asm-m68k/a.out-core.h b/include/asm-m68k/a.out-core.h deleted file mode 100644 index f6bfc1d63ff..00000000000 --- a/include/asm-m68k/a.out-core.h +++ /dev/null @@ -1,67 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct switch_stack *sw; - -/* changed the size calculations - should hopefully work better. lbt */ - dump->magic = CMAGIC; - dump->start_code = 0; - dump->start_stack = rdusp() & ~(PAGE_SIZE - 1); - dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; - dump->u_dsize = ((unsigned long) (current->mm->brk + - (PAGE_SIZE-1))) >> PAGE_SHIFT; - dump->u_dsize -= dump->u_tsize; - dump->u_ssize = 0; - - if (dump->start_stack < TASK_SIZE) - dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; - - dump->u_ar0 = offsetof(struct user, regs); - sw = ((struct switch_stack *)regs) - 1; - dump->regs.d1 = regs->d1; - dump->regs.d2 = regs->d2; - dump->regs.d3 = regs->d3; - dump->regs.d4 = regs->d4; - dump->regs.d5 = regs->d5; - dump->regs.d6 = sw->d6; - dump->regs.d7 = sw->d7; - dump->regs.a0 = regs->a0; - dump->regs.a1 = regs->a1; - dump->regs.a2 = regs->a2; - dump->regs.a3 = sw->a3; - dump->regs.a4 = sw->a4; - dump->regs.a5 = sw->a5; - dump->regs.a6 = sw->a6; - dump->regs.d0 = regs->d0; - dump->regs.orig_d0 = regs->orig_d0; - dump->regs.stkadj = regs->stkadj; - dump->regs.sr = regs->sr; - dump->regs.pc = regs->pc; - dump->regs.fmtvec = (regs->format << 12) | regs->vector; - /* dump floating point stuff */ - dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-m68k/a.out.h b/include/asm-m68k/a.out.h deleted file mode 100644 index 3885fe43432..00000000000 --- a/include/asm-m68k/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __M68K_A_OUT_H__ -#define __M68K_A_OUT_H__ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __M68K_A_OUT_H__ */ diff --git a/include/asm-m68k/adb_iop.h b/include/asm-m68k/adb_iop.h deleted file mode 100644 index 8a48e56f2d6..00000000000 --- a/include/asm-m68k/adb_iop.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * ADB through the IOP - * Written by Joshua M. Thompson - */ - -/* IOP number and channel number for ADB */ - -#define ADB_IOP IOP_NUM_ISM -#define ADB_CHAN 2 - -/* From the A/UX headers...maybe important, maybe not */ - -#define ADB_IOP_LISTEN 0x01 -#define ADB_IOP_TALK 0x02 -#define ADB_IOP_EXISTS 0x04 -#define ADB_IOP_FLUSH 0x08 -#define ADB_IOP_RESET 0x10 -#define ADB_IOP_INT 0x20 -#define ADB_IOP_POLL 0x40 -#define ADB_IOP_UNINT 0x80 - -#define AIF_RESET 0x00 -#define AIF_FLUSH 0x01 -#define AIF_LISTEN 0x08 -#define AIF_TALK 0x0C - -/* Flag bits in struct adb_iopmsg */ - -#define ADB_IOP_EXPLICIT 0x80 /* nonzero if explicit command */ -#define ADB_IOP_AUTOPOLL 0x40 /* auto/SRQ polling enabled */ -#define ADB_IOP_SRQ 0x04 /* SRQ detected */ -#define ADB_IOP_TIMEOUT 0x02 /* nonzero if timeout */ - -#ifndef __ASSEMBLY__ - -struct adb_iopmsg { - __u8 flags; /* ADB flags */ - __u8 count; /* no. of data bytes */ - __u8 cmd; /* ADB command */ - __u8 data[8]; /* ADB data */ - __u8 spare[21]; /* spare */ -}; - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/amigahw.h b/include/asm-m68k/amigahw.h deleted file mode 100644 index 5ca5dd951a4..00000000000 --- a/include/asm-m68k/amigahw.h +++ /dev/null @@ -1,350 +0,0 @@ -/* -** asm-m68k/amigahw.h -- This header defines some macros and pointers for -** the various Amiga custom hardware registers. -** The naming conventions used here conform to those -** used in the Amiga Hardware Reference Manual, 3rd Edition -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 9/24/92 by Greg Harp -*/ - -#ifndef _M68K_AMIGAHW_H -#define _M68K_AMIGAHW_H - -#include - - /* - * Different Amiga models - */ - -#define AMI_UNKNOWN (0) -#define AMI_500 (1) -#define AMI_500PLUS (2) -#define AMI_600 (3) -#define AMI_1000 (4) -#define AMI_1200 (5) -#define AMI_2000 (6) -#define AMI_2500 (7) -#define AMI_3000 (8) -#define AMI_3000T (9) -#define AMI_3000PLUS (10) -#define AMI_4000 (11) -#define AMI_4000T (12) -#define AMI_CDTV (13) -#define AMI_CD32 (14) -#define AMI_DRACO (15) - - - /* - * Chipsets - */ - -extern unsigned long amiga_chipset; - -#define CS_STONEAGE (0) -#define CS_OCS (1) -#define CS_ECS (2) -#define CS_AGA (3) - - - /* - * Miscellaneous - */ - -extern unsigned long amiga_eclock; /* 700 kHz E Peripheral Clock */ -extern unsigned long amiga_colorclock; /* 3.5 MHz Color Clock */ -extern unsigned long amiga_chip_size; /* Chip RAM Size (bytes) */ -extern unsigned char amiga_vblank; /* VBLANK Frequency */ - - -#define AMIGAHW_DECLARE(name) unsigned name : 1 -#define AMIGAHW_SET(name) (amiga_hw_present.name = 1) -#define AMIGAHW_PRESENT(name) (amiga_hw_present.name) - -struct amiga_hw_present { - /* video hardware */ - AMIGAHW_DECLARE(AMI_VIDEO); /* Amiga Video */ - AMIGAHW_DECLARE(AMI_BLITTER); /* Amiga Blitter */ - AMIGAHW_DECLARE(AMBER_FF); /* Amber Flicker Fixer */ - /* sound hardware */ - AMIGAHW_DECLARE(AMI_AUDIO); /* Amiga Audio */ - /* disk storage interfaces */ - AMIGAHW_DECLARE(AMI_FLOPPY); /* Amiga Floppy */ - AMIGAHW_DECLARE(A3000_SCSI); /* SCSI (wd33c93, A3000 alike) */ - AMIGAHW_DECLARE(A4000_SCSI); /* SCSI (ncr53c710, A4000T alike) */ - AMIGAHW_DECLARE(A1200_IDE); /* IDE (A1200 alike) */ - AMIGAHW_DECLARE(A4000_IDE); /* IDE (A4000 alike) */ - AMIGAHW_DECLARE(CD_ROM); /* CD ROM drive */ - /* other I/O hardware */ - AMIGAHW_DECLARE(AMI_KEYBOARD); /* Amiga Keyboard */ - AMIGAHW_DECLARE(AMI_MOUSE); /* Amiga Mouse */ - AMIGAHW_DECLARE(AMI_SERIAL); /* Amiga Serial */ - AMIGAHW_DECLARE(AMI_PARALLEL); /* Amiga Parallel */ - /* real time clocks */ - AMIGAHW_DECLARE(A2000_CLK); /* Hardware Clock (A2000 alike) */ - AMIGAHW_DECLARE(A3000_CLK); /* Hardware Clock (A3000 alike) */ - /* supporting hardware */ - AMIGAHW_DECLARE(CHIP_RAM); /* Chip RAM */ - AMIGAHW_DECLARE(PAULA); /* Paula (8364) */ - AMIGAHW_DECLARE(DENISE); /* Denise (8362) */ - AMIGAHW_DECLARE(DENISE_HR); /* Denise (8373) */ - AMIGAHW_DECLARE(LISA); /* Lisa (8375) */ - AMIGAHW_DECLARE(AGNUS_PAL); /* Normal/Fat PAL Agnus (8367/8371) */ - AMIGAHW_DECLARE(AGNUS_NTSC); /* Normal/Fat NTSC Agnus (8361/8370) */ - AMIGAHW_DECLARE(AGNUS_HR_PAL); /* Fat Hires PAL Agnus (8372) */ - AMIGAHW_DECLARE(AGNUS_HR_NTSC); /* Fat Hires NTSC Agnus (8372) */ - AMIGAHW_DECLARE(ALICE_PAL); /* PAL Alice (8374) */ - AMIGAHW_DECLARE(ALICE_NTSC); /* NTSC Alice (8374) */ - AMIGAHW_DECLARE(MAGIC_REKICK); /* A3000 Magic Hard Rekick */ - AMIGAHW_DECLARE(PCMCIA); /* PCMCIA Slot */ - AMIGAHW_DECLARE(GG2_ISA); /* GG2 Zorro2ISA Bridge */ - AMIGAHW_DECLARE(ZORRO); /* Zorro AutoConfig */ - AMIGAHW_DECLARE(ZORRO3); /* Zorro III */ -}; - -extern struct amiga_hw_present amiga_hw_present; - -struct CUSTOM { - unsigned short bltddat; - unsigned short dmaconr; - unsigned short vposr; - unsigned short vhposr; - unsigned short dskdatr; - unsigned short joy0dat; - unsigned short joy1dat; - unsigned short clxdat; - unsigned short adkconr; - unsigned short pot0dat; - unsigned short pot1dat; - unsigned short potgor; - unsigned short serdatr; - unsigned short dskbytr; - unsigned short intenar; - unsigned short intreqr; - unsigned char *dskptr; - unsigned short dsklen; - unsigned short dskdat; - unsigned short refptr; - unsigned short vposw; - unsigned short vhposw; - unsigned short copcon; - unsigned short serdat; - unsigned short serper; - unsigned short potgo; - unsigned short joytest; - unsigned short strequ; - unsigned short strvbl; - unsigned short strhor; - unsigned short strlong; - unsigned short bltcon0; - unsigned short bltcon1; - unsigned short bltafwm; - unsigned short bltalwm; - unsigned char *bltcpt; - unsigned char *bltbpt; - unsigned char *bltapt; - unsigned char *bltdpt; - unsigned short bltsize; - unsigned char pad2d; - unsigned char bltcon0l; - unsigned short bltsizv; - unsigned short bltsizh; - unsigned short bltcmod; - unsigned short bltbmod; - unsigned short bltamod; - unsigned short bltdmod; - unsigned short spare2[4]; - unsigned short bltcdat; - unsigned short bltbdat; - unsigned short bltadat; - unsigned short spare3[3]; - unsigned short deniseid; - unsigned short dsksync; - unsigned short *cop1lc; - unsigned short *cop2lc; - unsigned short copjmp1; - unsigned short copjmp2; - unsigned short copins; - unsigned short diwstrt; - unsigned short diwstop; - unsigned short ddfstrt; - unsigned short ddfstop; - unsigned short dmacon; - unsigned short clxcon; - unsigned short intena; - unsigned short intreq; - unsigned short adkcon; - struct { - unsigned short *audlc; - unsigned short audlen; - unsigned short audper; - unsigned short audvol; - unsigned short auddat; - unsigned short audspare[2]; - } aud[4]; - unsigned char *bplpt[8]; - unsigned short bplcon0; - unsigned short bplcon1; - unsigned short bplcon2; - unsigned short bplcon3; - unsigned short bpl1mod; - unsigned short bpl2mod; - unsigned short bplcon4; - unsigned short clxcon2; - unsigned short bpldat[8]; - unsigned char *sprpt[8]; - struct { - unsigned short pos; - unsigned short ctl; - unsigned short dataa; - unsigned short datab; - } spr[8]; - unsigned short color[32]; - unsigned short htotal; - unsigned short hsstop; - unsigned short hbstrt; - unsigned short hbstop; - unsigned short vtotal; - unsigned short vsstop; - unsigned short vbstrt; - unsigned short vbstop; - unsigned short sprhstrt; - unsigned short sprhstop; - unsigned short bplhstrt; - unsigned short bplhstop; - unsigned short hhposw; - unsigned short hhposr; - unsigned short beamcon0; - unsigned short hsstrt; - unsigned short vsstrt; - unsigned short hcenter; - unsigned short diwhigh; - unsigned short spare4[11]; - unsigned short fmode; -}; - -/* - * DMA register bits - */ -#define DMAF_SETCLR (0x8000) -#define DMAF_AUD0 (0x0001) -#define DMAF_AUD1 (0x0002) -#define DMAF_AUD2 (0x0004) -#define DMAF_AUD3 (0x0008) -#define DMAF_DISK (0x0010) -#define DMAF_SPRITE (0x0020) -#define DMAF_BLITTER (0x0040) -#define DMAF_COPPER (0x0080) -#define DMAF_RASTER (0x0100) -#define DMAF_MASTER (0x0200) -#define DMAF_BLITHOG (0x0400) -#define DMAF_BLTNZERO (0x2000) -#define DMAF_BLTDONE (0x4000) -#define DMAF_ALL (0x01FF) - -struct CIA { - unsigned char pra; char pad0[0xff]; - unsigned char prb; char pad1[0xff]; - unsigned char ddra; char pad2[0xff]; - unsigned char ddrb; char pad3[0xff]; - unsigned char talo; char pad4[0xff]; - unsigned char tahi; char pad5[0xff]; - unsigned char tblo; char pad6[0xff]; - unsigned char tbhi; char pad7[0xff]; - unsigned char todlo; char pad8[0xff]; - unsigned char todmid; char pad9[0xff]; - unsigned char todhi; char pada[0x1ff]; - unsigned char sdr; char padb[0xff]; - unsigned char icr; char padc[0xff]; - unsigned char cra; char padd[0xff]; - unsigned char crb; char pade[0xff]; -}; - -#define zTwoBase (0x80000000) -#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase) -#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase) - -#define CUSTOM_PHYSADDR (0xdff000) -#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR))) - -#define CIAA_PHYSADDR (0xbfe001) -#define CIAB_PHYSADDR (0xbfd000) -#define ciaa ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR))) -#define ciab ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR))) - -#define CHIP_PHYSADDR (0x000000) - -void amiga_chip_init (void); -void *amiga_chip_alloc(unsigned long size, const char *name); -void *amiga_chip_alloc_res(unsigned long size, struct resource *res); -void amiga_chip_free(void *ptr); -unsigned long amiga_chip_avail( void ); /*MILAN*/ -extern volatile unsigned short amiga_audio_min_period; - -static inline void amifb_video_off(void) -{ - if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) { - /* program Denise/Lisa for a higher maximum play rate */ - amiga_custom.htotal = 113; /* 31 kHz */ - amiga_custom.vtotal = 223; /* 70 Hz */ - amiga_custom.beamcon0 = 0x4390; /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */ - /* suspend the monitor */ - amiga_custom.hsstrt = amiga_custom.hsstop = 116; - amiga_custom.vsstrt = amiga_custom.vsstop = 226; - amiga_audio_min_period = 57; - } -} - -struct tod3000 { - unsigned int :28, second2:4; /* lower digit */ - unsigned int :28, second1:4; /* upper digit */ - unsigned int :28, minute2:4; /* lower digit */ - unsigned int :28, minute1:4; /* upper digit */ - unsigned int :28, hour2:4; /* lower digit */ - unsigned int :28, hour1:4; /* upper digit */ - unsigned int :28, weekday:4; - unsigned int :28, day2:4; /* lower digit */ - unsigned int :28, day1:4; /* upper digit */ - unsigned int :28, month2:4; /* lower digit */ - unsigned int :28, month1:4; /* upper digit */ - unsigned int :28, year2:4; /* lower digit */ - unsigned int :28, year1:4; /* upper digit */ - unsigned int :28, cntrl1:4; /* control-byte 1 */ - unsigned int :28, cntrl2:4; /* control-byte 2 */ - unsigned int :28, cntrl3:4; /* control-byte 3 */ -}; -#define TOD3000_CNTRL1_HOLD 0 -#define TOD3000_CNTRL1_FREE 9 -#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000))) - -struct tod2000 { - unsigned int :28, second2:4; /* lower digit */ - unsigned int :28, second1:4; /* upper digit */ - unsigned int :28, minute2:4; /* lower digit */ - unsigned int :28, minute1:4; /* upper digit */ - unsigned int :28, hour2:4; /* lower digit */ - unsigned int :28, hour1:4; /* upper digit */ - unsigned int :28, day2:4; /* lower digit */ - unsigned int :28, day1:4; /* upper digit */ - unsigned int :28, month2:4; /* lower digit */ - unsigned int :28, month1:4; /* upper digit */ - unsigned int :28, year2:4; /* lower digit */ - unsigned int :28, year1:4; /* upper digit */ - unsigned int :28, weekday:4; - unsigned int :28, cntrl1:4; /* control-byte 1 */ - unsigned int :28, cntrl2:4; /* control-byte 2 */ - unsigned int :28, cntrl3:4; /* control-byte 3 */ -}; - -#define TOD2000_CNTRL1_HOLD (1<<0) -#define TOD2000_CNTRL1_BUSY (1<<1) -#define TOD2000_CNTRL3_24HMODE (1<<2) -#define TOD2000_HOUR1_PM (1<<2) -#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000))) - -#endif /* _M68K_AMIGAHW_H */ diff --git a/include/asm-m68k/amigaints.h b/include/asm-m68k/amigaints.h deleted file mode 100644 index b1bcdb835ab..00000000000 --- a/include/asm-m68k/amigaints.h +++ /dev/null @@ -1,113 +0,0 @@ -/* -** amigaints.h -- Amiga Linux interrupt handling structs and prototypes -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 10/2/92 by Greg Harp -*/ - -#ifndef _ASMm68k_AMIGAINTS_H_ -#define _ASMm68k_AMIGAINTS_H_ - -#include - -/* -** Amiga Interrupt sources. -** -*/ - -#define AUTO_IRQS (8) -#define AMI_STD_IRQS (14) -#define CIA_IRQS (5) -#define AMI_IRQS (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */ - -/* builtin serial port interrupts */ -#define IRQ_AMIGA_TBE (IRQ_USER+0) -#define IRQ_AMIGA_RBF (IRQ_USER+11) - -/* floppy disk interrupts */ -#define IRQ_AMIGA_DSKBLK (IRQ_USER+1) -#define IRQ_AMIGA_DSKSYN (IRQ_USER+12) - -/* software interrupts */ -#define IRQ_AMIGA_SOFT (IRQ_USER+2) - -/* interrupts from external hardware */ -#define IRQ_AMIGA_PORTS IRQ_AUTO_2 -#define IRQ_AMIGA_EXTER IRQ_AUTO_6 - -/* copper interrupt */ -#define IRQ_AMIGA_COPPER (IRQ_USER+4) - -/* vertical blanking interrupt */ -#define IRQ_AMIGA_VERTB (IRQ_USER+5) - -/* Blitter done interrupt */ -#define IRQ_AMIGA_BLIT (IRQ_USER+6) - -/* Audio interrupts */ -#define IRQ_AMIGA_AUD0 (IRQ_USER+7) -#define IRQ_AMIGA_AUD1 (IRQ_USER+8) -#define IRQ_AMIGA_AUD2 (IRQ_USER+9) -#define IRQ_AMIGA_AUD3 (IRQ_USER+10) - -/* CIA interrupt sources */ -#define IRQ_AMIGA_CIAA (IRQ_USER+14) -#define IRQ_AMIGA_CIAA_TA (IRQ_USER+14) -#define IRQ_AMIGA_CIAA_TB (IRQ_USER+15) -#define IRQ_AMIGA_CIAA_ALRM (IRQ_USER+16) -#define IRQ_AMIGA_CIAA_SP (IRQ_USER+17) -#define IRQ_AMIGA_CIAA_FLG (IRQ_USER+18) -#define IRQ_AMIGA_CIAB (IRQ_USER+19) -#define IRQ_AMIGA_CIAB_TA (IRQ_USER+19) -#define IRQ_AMIGA_CIAB_TB (IRQ_USER+20) -#define IRQ_AMIGA_CIAB_ALRM (IRQ_USER+21) -#define IRQ_AMIGA_CIAB_SP (IRQ_USER+22) -#define IRQ_AMIGA_CIAB_FLG (IRQ_USER+23) - - -/* INTREQR masks */ -#define IF_SETCLR 0x8000 /* set/clr bit */ -#define IF_INTEN 0x4000 /* master interrupt bit in INT* registers */ -#define IF_EXTER 0x2000 /* external level 6 and CIA B interrupt */ -#define IF_DSKSYN 0x1000 /* disk sync interrupt */ -#define IF_RBF 0x0800 /* serial receive buffer full interrupt */ -#define IF_AUD3 0x0400 /* audio channel 3 done interrupt */ -#define IF_AUD2 0x0200 /* audio channel 2 done interrupt */ -#define IF_AUD1 0x0100 /* audio channel 1 done interrupt */ -#define IF_AUD0 0x0080 /* audio channel 0 done interrupt */ -#define IF_BLIT 0x0040 /* blitter done interrupt */ -#define IF_VERTB 0x0020 /* vertical blanking interrupt */ -#define IF_COPER 0x0010 /* copper interrupt */ -#define IF_PORTS 0x0008 /* external level 2 and CIA A interrupt */ -#define IF_SOFT 0x0004 /* software initiated interrupt */ -#define IF_DSKBLK 0x0002 /* diskblock DMA finished */ -#define IF_TBE 0x0001 /* serial transmit buffer empty interrupt */ - -/* CIA interrupt control register bits */ - -#define CIA_ICR_TA 0x01 -#define CIA_ICR_TB 0x02 -#define CIA_ICR_ALRM 0x04 -#define CIA_ICR_SP 0x08 -#define CIA_ICR_FLG 0x10 -#define CIA_ICR_ALL 0x1f -#define CIA_ICR_SETCLR 0x80 - -extern void amiga_init_IRQ(void); - -/* to access the interrupt control registers of CIA's use only -** these functions, they behave exactly like the amiga os routines -*/ - -extern struct ciabase ciaa_base, ciab_base; - -extern void cia_init_IRQ(struct ciabase *base); -extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask); -extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask); - -#endif /* asm-m68k/amigaints.h */ diff --git a/include/asm-m68k/amigayle.h b/include/asm-m68k/amigayle.h deleted file mode 100644 index bb5a6aa329f..00000000000 --- a/include/asm-m68k/amigayle.h +++ /dev/null @@ -1,107 +0,0 @@ -/* -** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip -** found on the Amiga 1200 -** This information was found by disassembling card.resource, -** so the definitions may not be 100% correct -** anyone has an official doc ? -** -** Copyright 1997 by Alain Malek -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 11/28/97 by Alain Malek -*/ - -#ifndef _M68K_AMIGAYLE_H_ -#define _M68K_AMIGAYLE_H_ - -#include -#include - -/* memory layout */ - -#define GAYLE_RAM (0x600000+zTwoBase) -#define GAYLE_RAMSIZE (0x400000) -#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase) -#define GAYLE_ATTRIBUTESIZE (0x020000) -#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */ -#define GAYLE_IOSIZE (0x010000) -#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */ - -/* offset for accessing odd IO registers */ -#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1) - -/* GAYLE registers */ - -struct GAYLE { - u_char cardstatus; - u_char pad0[0x1000-1]; - - u_char intreq; - u_char pad1[0x1000-1]; - - u_char inten; - u_char pad2[0x1000-1]; - - u_char config; - u_char pad3[0x1000-1]; -}; - -#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */ - -#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset, - read 1 byte to stop reset */ - -#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS)) -#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET)) - -#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE)) - -#if 0 -#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) -#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) ) - -#define gayle_inw(a) readw( GAYLE_IO+(a) ) -#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) ) -#endif - -/* GAYLE_CARDSTATUS bit def */ - -#define GAYLE_CS_CCDET 0x40 /* credit card detect */ -#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */ -#define GAYLE_CS_SC 0x20 /* credit card status change */ -#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */ -#define GAYLE_CS_DA 0x10 /* digital audio */ -#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */ -#define GAYLE_CS_BSY 0x04 /* credit card busy */ -#define GAYLE_CS_IRQ 0x04 /* interrupt request */ - -/* GAYLE_IRQ bit def */ - -#define GAYLE_IRQ_IDE 0x80 -#define GAYLE_IRQ_CCDET 0x40 -#define GAYLE_IRQ_BVD1 0x20 -#define GAYLE_IRQ_SC 0x20 -#define GAYLE_IRQ_BVD2 0x10 -#define GAYLE_IRQ_DA 0x10 -#define GAYLE_IRQ_WR 0x08 -#define GAYLE_IRQ_BSY 0x04 -#define GAYLE_IRQ_IRQ 0x04 -#define GAYLE_IRQ_IDEACK1 0x02 -#define GAYLE_IRQ_IDEACK0 0x01 - -/* GAYLE_CONFIG bit def - (bit 0-1 for program voltage, bit 2-3 for access speed */ - -#define GAYLE_CFG_0V 0x00 -#define GAYLE_CFG_5V 0x01 -#define GAYLE_CFG_12V 0x02 - -#define GAYLE_CFG_100NS 0x08 -#define GAYLE_CFG_150NS 0x04 -#define GAYLE_CFG_250NS 0x00 -#define GAYLE_CFG_720NS 0x0c - -#endif /* asm-m68k/amigayle.h */ diff --git a/include/asm-m68k/amipcmcia.h b/include/asm-m68k/amipcmcia.h deleted file mode 100644 index 6f1ec1887d8..00000000000 --- a/include/asm-m68k/amipcmcia.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions -** -** Copyright 1997 by Alain Malek -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 12/10/97 by Alain Malek -*/ - -#ifndef __AMIGA_PCMCIA_H__ -#define __AMIGA_PCMCIA_H__ - -#include - -/* prototypes */ - -void pcmcia_reset(void); -int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len); -void pcmcia_program_voltage(int voltage); -void pcmcia_access_speed(int speed); -void pcmcia_write_enable(void); -void pcmcia_write_disable(void); - -static inline u_char pcmcia_read_status(void) -{ - return (gayle.cardstatus & 0x7c); -} - -static inline u_char pcmcia_get_intreq(void) -{ - return (gayle.intreq); -} - -static inline void pcmcia_ack_int(u_char intreq) -{ - gayle.intreq = 0xf8; -} - -static inline void pcmcia_enable_irq(void) -{ - gayle.inten |= GAYLE_IRQ_IRQ; -} - -static inline void pcmcia_disable_irq(void) -{ - gayle.inten &= ~GAYLE_IRQ_IRQ; -} - -#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET) - -/* valid voltages for pcmcia_ProgramVoltage */ - -#define PCMCIA_0V 0 -#define PCMCIA_5V 5 -#define PCMCIA_12V 12 - -/* valid speeds for pcmcia_AccessSpeed */ - -#define PCMCIA_SPEED_100NS 100 -#define PCMCIA_SPEED_150NS 150 -#define PCMCIA_SPEED_250NS 250 -#define PCMCIA_SPEED_720NS 720 - -/* PCMCIA Tuple codes */ - -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* FUNCID */ - -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -#endif diff --git a/include/asm-m68k/apollodma.h b/include/asm-m68k/apollodma.h deleted file mode 100644 index 954adc851ad..00000000000 --- a/include/asm-m68k/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/include/asm-m68k/apollohw.h b/include/asm-m68k/apollohw.h deleted file mode 100644 index a1373b9aa28..00000000000 --- a/include/asm-m68k/apollohw.h +++ /dev/null @@ -1,108 +0,0 @@ -/* apollohw.h : some structures to access apollo HW */ - -#ifndef _ASMm68k_APOLLOHW_H_ -#define _ASMm68k_APOLLOHW_H_ - -#include - -/* - apollo models -*/ - -extern u_long apollo_model; - -#define APOLLO_UNKNOWN (0) -#define APOLLO_DN3000 (1) -#define APOLLO_DN3010 (2) -#define APOLLO_DN3500 (3) -#define APOLLO_DN4000 (4) -#define APOLLO_DN4500 (5) - -/* - see scn2681 data sheet for more info. - member names are read_write. -*/ - -#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x - -struct SCN2681 { - - DECLARE_2681_FIELD(mra); - DECLARE_2681_FIELD(sra_csra); - DECLARE_2681_FIELD(BRGtest_cra); - DECLARE_2681_FIELD(rhra_thra); - DECLARE_2681_FIELD(ipcr_acr); - DECLARE_2681_FIELD(isr_imr); - DECLARE_2681_FIELD(ctu_ctur); - DECLARE_2681_FIELD(ctl_ctlr); - DECLARE_2681_FIELD(mrb); - DECLARE_2681_FIELD(srb_csrb); - DECLARE_2681_FIELD(tst_crb); - DECLARE_2681_FIELD(rhrb_thrb); - DECLARE_2681_FIELD(reserved); - DECLARE_2681_FIELD(ip_opcr); - DECLARE_2681_FIELD(startCnt_setOutBit); - DECLARE_2681_FIELD(stopCnt_resetOutBit); - -}; - -#if 0 -struct mc146818 { - - unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4, - minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4; - unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4, - day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4; - unsigned int month1:4, month2:4, year1:4, year2:4, :16; - -}; -#endif - -struct mc146818 { - unsigned char second, alarm_second; - unsigned char minute, alarm_minute; - unsigned char hours, alarm_hours; - unsigned char day_of_week, day_of_month; - unsigned char month, year; -}; - - -#define IO_BASE 0x80000000 - -extern u_long sio01_physaddr; -extern u_long sio23_physaddr; -extern u_long rtc_physaddr; -extern u_long pica_physaddr; -extern u_long picb_physaddr; -extern u_long cpuctrl_physaddr; -extern u_long timer_physaddr; - -#define SAU7_SIO01_PHYSADDR 0x10400 -#define SAU7_SIO23_PHYSADDR 0x10500 -#define SAU7_RTC_PHYSADDR 0x10900 -#define SAU7_PICA 0x11000 -#define SAU7_PICB 0x11100 -#define SAU7_CPUCTRL 0x10100 -#define SAU7_TIMER 0x010800 - -#define SAU8_SIO01_PHYSADDR 0x8400 -#define SAU8_RTC_PHYSADDR 0x8900 -#define SAU8_PICA 0x9400 -#define SAU8_PICB 0x9500 -#define SAU8_CPUCTRL 0x8100 -#define SAU8_TIMER 0x8800 - -#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr))) -#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr))) -#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr))) -#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) -#define pica (IO_BASE + pica_physaddr) -#define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) -#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) - -#define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) - -#define IRQ_APOLLO IRQ_USER - -#endif diff --git a/include/asm-m68k/atafd.h b/include/asm-m68k/atafd.h deleted file mode 100644 index 8456889ee7d..00000000000 --- a/include/asm-m68k/atafd.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M68K_FD_H -#define _ASM_M68K_FD_H - -/* Definitions for the Atari Floppy driver */ - -struct atari_format_descr { - int track; /* to be formatted */ - int head; /* "" "" */ - int sect_offset; /* offset of first sector */ -}; - -#endif diff --git a/include/asm-m68k/atafdreg.h b/include/asm-m68k/atafdreg.h deleted file mode 100644 index bbf80949fd9..00000000000 --- a/include/asm-m68k/atafdreg.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef _LINUX_FDREG_H -#define _LINUX_FDREG_H - -/* -** WD1772 stuff - */ - -/* register codes */ - -#define FDCSELREG_STP (0x80) /* command/status register */ -#define FDCSELREG_TRA (0x82) /* track register */ -#define FDCSELREG_SEC (0x84) /* sector register */ -#define FDCSELREG_DTA (0x86) /* data register */ - -/* register names for FDC_READ/WRITE macros */ - -#define FDCREG_CMD 0 -#define FDCREG_STATUS 0 -#define FDCREG_TRACK 2 -#define FDCREG_SECTOR 4 -#define FDCREG_DATA 6 - -/* command opcodes */ - -#define FDCCMD_RESTORE (0x00) /* - */ -#define FDCCMD_SEEK (0x10) /* | */ -#define FDCCMD_STEP (0x20) /* | TYP 1 Commands */ -#define FDCCMD_STIN (0x40) /* | */ -#define FDCCMD_STOT (0x60) /* - */ -#define FDCCMD_RDSEC (0x80) /* - TYP 2 Commands */ -#define FDCCMD_WRSEC (0xa0) /* - " */ -#define FDCCMD_RDADR (0xc0) /* - */ -#define FDCCMD_RDTRA (0xe0) /* | TYP 3 Commands */ -#define FDCCMD_WRTRA (0xf0) /* - */ -#define FDCCMD_FORCI (0xd0) /* - TYP 4 Command */ - -/* command modifier bits */ - -#define FDCCMDADD_SR6 (0x00) /* step rate settings */ -#define FDCCMDADD_SR12 (0x01) -#define FDCCMDADD_SR2 (0x02) -#define FDCCMDADD_SR3 (0x03) -#define FDCCMDADD_V (0x04) /* verify */ -#define FDCCMDADD_H (0x08) /* wait for spin-up */ -#define FDCCMDADD_U (0x10) /* update track register */ -#define FDCCMDADD_M (0x10) /* multiple sector access */ -#define FDCCMDADD_E (0x04) /* head settling flag */ -#define FDCCMDADD_P (0x02) /* precompensation off */ -#define FDCCMDADD_A0 (0x01) /* DAM flag */ - -/* status register bits */ - -#define FDCSTAT_MOTORON (0x80) /* motor on */ -#define FDCSTAT_WPROT (0x40) /* write protected (FDCCMD_WR*) */ -#define FDCSTAT_SPINUP (0x20) /* motor speed stable (Type I) */ -#define FDCSTAT_DELDAM (0x20) /* sector has deleted DAM (Type II+III) */ -#define FDCSTAT_RECNF (0x10) /* record not found */ -#define FDCSTAT_CRC (0x08) /* CRC error */ -#define FDCSTAT_TR00 (0x04) /* Track 00 flag (Type I) */ -#define FDCSTAT_LOST (0x04) /* Lost Data (Type II+III) */ -#define FDCSTAT_IDX (0x02) /* Index status (Type I) */ -#define FDCSTAT_DRQ (0x02) /* DRQ status (Type II+III) */ -#define FDCSTAT_BUSY (0x01) /* FDC is busy */ - - -/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1 1 -> Side 2 */ -#define DSKSIDE (0x01) - -#define DSKDRVNONE (0x06) -#define DSKDRV0 (0x02) -#define DSKDRV1 (0x04) - -/* step rates */ -#define FDCSTEP_6 0x00 -#define FDCSTEP_12 0x01 -#define FDCSTEP_2 0x02 -#define FDCSTEP_3 0x03 - -#endif diff --git a/include/asm-m68k/atari_joystick.h b/include/asm-m68k/atari_joystick.h deleted file mode 100644 index 93be7da9f2c..00000000000 --- a/include/asm-m68k/atari_joystick.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _LINUX_ATARI_JOYSTICK_H -#define _LINUX_ATARI_JOYSTICK_H - -/* - * linux/include/linux/atari_joystick.h - * header file for Atari Joystick driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -void atari_joystick_interrupt(char*); -int atari_joystick_init(void); -extern int atari_mouse_buttons; - -struct joystick_status { - char fire; - char dir; - int ready; - int active; - wait_queue_head_t wait; -}; - -#endif diff --git a/include/asm-m68k/atari_stdma.h b/include/asm-m68k/atari_stdma.h deleted file mode 100644 index 8e389b7fa70..00000000000 --- a/include/asm-m68k/atari_stdma.h +++ /dev/null @@ -1,22 +0,0 @@ - -#ifndef _atari_stdma_h -#define _atari_stdma_h - - -#include - - -/***************************** Prototypes *****************************/ - -void stdma_lock(irq_handler_t handler, void *data); -void stdma_release( void ); -int stdma_others_waiting( void ); -int stdma_islocked( void ); -void *stdma_locked_by( void ); -void stdma_init( void ); - -/************************* End of Prototypes **************************/ - - - -#endif /* _atari_stdma_h */ diff --git a/include/asm-m68k/atari_stram.h b/include/asm-m68k/atari_stram.h deleted file mode 100644 index 7546d13963b..00000000000 --- a/include/asm-m68k/atari_stram.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _M68K_ATARI_STRAM_H -#define _M68K_ATARI_STRAM_H - -/* - * Functions for Atari ST-RAM management - */ - -/* public interface */ -void *atari_stram_alloc(long size, const char *owner); -void atari_stram_free(void *); - -/* functions called internally by other parts of the kernel */ -void atari_stram_init(void); -void atari_stram_reserve_pages(void *start_mem); -void atari_stram_mem_init_hook (void); - -#endif /*_M68K_ATARI_STRAM_H */ diff --git a/include/asm-m68k/atarihw.h b/include/asm-m68k/atarihw.h deleted file mode 100644 index 1412b4ab202..00000000000 --- a/include/asm-m68k/atarihw.h +++ /dev/null @@ -1,807 +0,0 @@ -/* -** linux/atarihw.h -- This header defines some macros and pointers for -** the various Atari custom hardware registers. -** -** Copyright 1994 by Björn Brauel -** -** 5/1/94 Roman Hodek: -** Added definitions for TT specific chips. -** -** 1996-09-13 lars brinkhoff : -** Finally added definitions for the matrix/codec and the DSP56001 host -** interface. -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _LINUX_ATARIHW_H_ -#define _LINUX_ATARIHW_H_ - -#include -#include -#include - -extern u_long atari_mch_cookie; -extern u_long atari_mch_type; -extern u_long atari_switches; -extern int atari_rtc_year_offset; -extern int atari_dont_touch_floppy_select; - -/* convenience macros for testing machine type */ -#define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST) -#define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ - (atari_mch_cookie & 0xffff) == 0) -#define MACH_IS_MSTE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ - (atari_mch_cookie & 0xffff) == 0x10) -#define MACH_IS_TT ((atari_mch_cookie >> 16) == ATARI_MCH_TT) -#define MACH_IS_FALCON ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON) -#define MACH_IS_MEDUSA (atari_mch_type == ATARI_MACH_MEDUSA) -#define MACH_IS_AB40 (atari_mch_type == ATARI_MACH_AB40) - -/* values for atari_switches */ -#define ATARI_SWITCH_IKBD 0x01 -#define ATARI_SWITCH_MIDI 0x02 -#define ATARI_SWITCH_SND6 0x04 -#define ATARI_SWITCH_SND7 0x08 -#define ATARI_SWITCH_OVSC_SHIFT 16 -#define ATARI_SWITCH_OVSC_IKBD (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_MIDI (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_SND6 (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_SND7 (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT) -#define ATARI_SWITCH_OVSC_MASK 0xffff0000 - -/* - * Define several Hardware-Chips for indication so that for the ATARI we do - * no longer decide whether it is a Falcon or other machine . It's just - * important what hardware the machine uses - */ - -/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */ - -#define ATARIHW_DECLARE(name) unsigned name : 1 -#define ATARIHW_SET(name) (atari_hw_present.name = 1) -#define ATARIHW_PRESENT(name) (atari_hw_present.name) - -struct atari_hw_present { - /* video hardware */ - ATARIHW_DECLARE(STND_SHIFTER); /* ST-Shifter - no base low ! */ - ATARIHW_DECLARE(EXTD_SHIFTER); /* STe-Shifter - 24 bit address */ - ATARIHW_DECLARE(TT_SHIFTER); /* TT-Shifter */ - ATARIHW_DECLARE(VIDEL_SHIFTER); /* Falcon-Shifter */ - /* sound hardware */ - ATARIHW_DECLARE(YM_2149); /* Yamaha YM 2149 */ - ATARIHW_DECLARE(PCM_8BIT); /* PCM-Sound in STe-ATARI */ - ATARIHW_DECLARE(CODEC); /* CODEC Sound (Falcon) */ - /* disk storage interfaces */ - ATARIHW_DECLARE(TT_SCSI); /* Directly mapped NCR5380 */ - ATARIHW_DECLARE(ST_SCSI); /* NCR5380 via ST-DMA (Falcon) */ - ATARIHW_DECLARE(ACSI); /* Standard ACSI like in STs */ - ATARIHW_DECLARE(IDE); /* IDE Interface */ - ATARIHW_DECLARE(FDCSPEED); /* 8/16 MHz switch for FDC */ - /* other I/O hardware */ - ATARIHW_DECLARE(ST_MFP); /* The ST-MFP (there should be no Atari - without it... but who knows?) */ - ATARIHW_DECLARE(TT_MFP); /* 2nd MFP */ - ATARIHW_DECLARE(SCC); /* Serial Communications Contr. */ - ATARIHW_DECLARE(ST_ESCC); /* SCC Z83230 in an ST */ - ATARIHW_DECLARE(ANALOG_JOY); /* Paddle Interface for STe - and Falcon */ - ATARIHW_DECLARE(MICROWIRE); /* Microwire Interface */ - /* DMA */ - ATARIHW_DECLARE(STND_DMA); /* 24 Bit limited ST-DMA */ - ATARIHW_DECLARE(EXTD_DMA); /* 32 Bit ST-DMA */ - ATARIHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */ - ATARIHW_DECLARE(SCC_DMA); /* DMA for the SCC */ - /* real time clocks */ - ATARIHW_DECLARE(TT_CLK); /* TT compatible clock chip */ - ATARIHW_DECLARE(MSTE_CLK); /* Mega ST(E) clock chip */ - /* supporting hardware */ - ATARIHW_DECLARE(SCU); /* System Control Unit */ - ATARIHW_DECLARE(BLITTER); /* Blitter */ - ATARIHW_DECLARE(VME); /* VME Bus */ - ATARIHW_DECLARE(DSP56K); /* DSP56k processor in Falcon */ -}; - -extern struct atari_hw_present atari_hw_present; - - -/* Reading the MFP port register gives a machine independent delay, since the - * MFP always has a 8 MHz clock. This avoids problems with the varying length - * of nops on various machines. Somebody claimed that the tstb takes 600 ns. - */ -#define MFPDELAY() \ - __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" ); - -/* Do cache push/invalidate for DMA read/write. This function obeys the - * snooping on some machines (Medusa) and processors: The Medusa itself can - * snoop, but only the '040 can source data from its cache to DMA writes i.e., - * reads from memory). Both '040 and '060 invalidate cache entries on snooped - * DMA reads (i.e., writes to memory). - */ - - -#define atari_readb raw_inb -#define atari_writeb raw_outb - -#define atari_inb_p raw_inb -#define atari_outb_p raw_outb - - - -#include -#include - -static inline void dma_cache_maintenance( unsigned long paddr, - unsigned long len, - int writeflag ) - -{ - if (writeflag) { - if (!MACH_IS_MEDUSA || CPU_IS_060) - cache_push( paddr, len ); - } - else { - if (!MACH_IS_MEDUSA) - cache_clear( paddr, len ); - } -} - - -/* -** Shifter - */ -#define ST_LOW 0 -#define ST_MID 1 -#define ST_HIGH 2 -#define TT_LOW 7 -#define TT_MID 4 -#define TT_HIGH 6 - -#define SHF_BAS (0xffff8200) -struct SHIFTER - { - u_char pad1; - u_char bas_hi; - u_char pad2; - u_char bas_md; - u_char pad3; - u_char volatile vcounthi; - u_char pad4; - u_char volatile vcountmid; - u_char pad5; - u_char volatile vcountlow; - u_char volatile syncmode; - u_char pad6; - u_char pad7; - u_char bas_lo; - }; -# define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) - -#define SHF_FBAS (0xffff820e) -struct SHIFTER_F030 - { - u_short off_next; - u_short scn_width; - }; -# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS)) - - -#define SHF_TBAS (0xffff8200) -struct SHIFTER_TT { - u_char char_dummy0; - u_char bas_hi; /* video mem base addr, high and mid byte */ - u_char char_dummy1; - u_char bas_md; - u_char char_dummy2; - u_char vcount_hi; /* pointer to currently displayed byte */ - u_char char_dummy3; - u_char vcount_md; - u_char char_dummy4; - u_char vcount_lo; - u_short st_sync; /* ST compatible sync mode register, unused */ - u_char char_dummy5; - u_char bas_lo; /* video mem addr, low byte */ - u_char char_dummy6[2+3*16]; - /* $ffff8240: */ - u_short color_reg[16]; /* 16 color registers */ - u_char st_shiftmode; /* ST compatible shift mode register, unused */ - u_char char_dummy7; - u_short tt_shiftmode; /* TT shift mode register */ - - -}; -#define shifter_tt ((*(volatile struct SHIFTER_TT *)SHF_TBAS)) - -/* values for shifter_tt->tt_shiftmode */ -#define TT_SHIFTER_STLOW 0x0000 -#define TT_SHIFTER_STMID 0x0100 -#define TT_SHIFTER_STHIGH 0x0200 -#define TT_SHIFTER_TTLOW 0x0700 -#define TT_SHIFTER_TTMID 0x0400 -#define TT_SHIFTER_TTHIGH 0x0600 -#define TT_SHIFTER_MODEMASK 0x0700 -#define TT_SHIFTER_NUMMODE 0x0008 -#define TT_SHIFTER_PALETTE_MASK 0x000f -#define TT_SHIFTER_GRAYMODE 0x1000 - -/* 256 TT palette registers */ -#define TT_PALETTE_BASE (0xffff8400) -#define tt_palette ((volatile u_short *)TT_PALETTE_BASE) - -#define TT_PALETTE_RED_MASK 0x0f00 -#define TT_PALETTE_GREEN_MASK 0x00f0 -#define TT_PALETTE_BLUE_MASK 0x000f - -/* -** Falcon030 VIDEL Video Controller -** for description see File 'linux\tools\atari\hardware.txt - */ -#define f030_col ((u_long *) 0xffff9800) -#define f030_xreg ((u_short*) 0xffff8282) -#define f030_yreg ((u_short*) 0xffff82a2) -#define f030_creg ((u_short*) 0xffff82c0) -#define f030_sreg ((u_short*) 0xffff8260) -#define f030_mreg ((u_short*) 0xffff820a) -#define f030_linewidth ((u_short*) 0xffff820e) -#define f030_hscroll ((u_char*) 0xffff8265) - -#define VIDEL_BAS (0xffff8260) -struct VIDEL { - u_short st_shift; - u_short pad1; - u_char xoffset_s; - u_char xoffset; - u_short f_shift; - u_char pad2[0x1a]; - u_short hht; - u_short hbb; - u_short hbe; - u_short hdb; - u_short hde; - u_short hss; - u_char pad3[0x14]; - u_short vft; - u_short vbb; - u_short vbe; - u_short vdb; - u_short vde; - u_short vss; - u_char pad4[0x12]; - u_short control; - u_short mode; -}; -#define videl ((*(volatile struct VIDEL *)VIDEL_BAS)) - -/* -** DMA/WD1772 Disk Controller - */ - -#define FWD_BAS (0xffff8604) -struct DMA_WD - { - u_short fdc_acces_seccount; - u_short dma_mode_status; - u_char dma_vhi; /* Some extended ST-DMAs can handle 32 bit addresses */ - u_char dma_hi; - u_char char_dummy2; - u_char dma_md; - u_char char_dummy3; - u_char dma_lo; - u_short fdc_speed; - }; -# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS)) -/* alias */ -#define st_dma dma_wd -/* The two highest bytes of an extended DMA as a short; this is a must - * for the Medusa. - */ -#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608)) - -/* -** YM2149 Sound Chip -** access in bytes - */ - -#define YM_BAS (0xffff8800) -struct SOUND_YM - { - u_char rd_data_reg_sel; - u_char char_dummy1; - u_char wd_data; - }; -#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS)) - -/* TT SCSI DMA */ - -#define TT_SCSI_DMA_BAS (0xffff8700) -struct TT_DMA { - u_char char_dummy0; - u_char dma_addr_hi; - u_char char_dummy1; - u_char dma_addr_hmd; - u_char char_dummy2; - u_char dma_addr_lmd; - u_char char_dummy3; - u_char dma_addr_lo; - u_char char_dummy4; - u_char dma_cnt_hi; - u_char char_dummy5; - u_char dma_cnt_hmd; - u_char char_dummy6; - u_char dma_cnt_lmd; - u_char char_dummy7; - u_char dma_cnt_lo; - u_long dma_restdata; - u_short dma_ctrl; -}; -#define tt_scsi_dma ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS)) - -/* TT SCSI Controller 5380 */ - -#define TT_5380_BAS (0xffff8781) -struct TT_5380 { - u_char scsi_data; - u_char char_dummy1; - u_char scsi_icr; - u_char char_dummy2; - u_char scsi_mode; - u_char char_dummy3; - u_char scsi_tcr; - u_char char_dummy4; - u_char scsi_idstat; - u_char char_dummy5; - u_char scsi_dmastat; - u_char char_dummy6; - u_char scsi_targrcv; - u_char char_dummy7; - u_char scsi_inircv; -}; -#define tt_scsi ((*(volatile struct TT_5380 *)TT_5380_BAS)) -#define tt_scsi_regp ((volatile char *)TT_5380_BAS) - - -/* -** Falcon DMA Sound Subsystem - */ - -#define MATRIX_BASE (0xffff8930) -struct MATRIX -{ - u_short source; - u_short destination; - u_char external_frequency_divider; - u_char internal_frequency_divider; -}; -#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE) - -#define CODEC_BASE (0xffff8936) -struct CODEC -{ - u_char tracks; - u_char input_source; -#define CODEC_SOURCE_ADC 1 -#define CODEC_SOURCE_MATRIX 2 - u_char adc_source; -#define ADC_SOURCE_RIGHT_PSG 1 -#define ADC_SOURCE_LEFT_PSG 2 - u_char gain; -#define CODEC_GAIN_RIGHT 0x0f -#define CODEC_GAIN_LEFT 0xf0 - u_char attenuation; -#define CODEC_ATTENUATION_RIGHT 0x0f -#define CODEC_ATTENUATION_LEFT 0xf0 - u_char unused1; - u_char status; -#define CODEC_OVERFLOW_RIGHT 1 -#define CODEC_OVERFLOW_LEFT 2 - u_char unused2, unused3, unused4, unused5; - u_char gpio_directions; -#define GPIO_IN 0 -#define GPIO_OUT 1 - u_char unused6; - u_char gpio_data; -}; -#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE) - -/* -** Falcon Blitter -*/ - -#define BLT_BAS (0xffff8a00) - -struct BLITTER - { - u_short halftone[16]; - u_short src_x_inc; - u_short src_y_inc; - u_long src_address; - u_short endmask1; - u_short endmask2; - u_short endmask3; - u_short dst_x_inc; - u_short dst_y_inc; - u_long dst_address; - u_short wd_per_line; - u_short ln_per_bb; - u_short hlf_op_reg; - u_short log_op_reg; - u_short lin_nm_reg; - u_short skew_reg; - }; -# define blitter ((*(volatile struct BLITTER *)BLT_BAS)) - - -/* -** SCC Z8530 - */ - -#define SCC_BAS (0xffff8c81) -struct SCC - { - u_char cha_a_ctrl; - u_char char_dummy1; - u_char cha_a_data; - u_char char_dummy2; - u_char cha_b_ctrl; - u_char char_dummy3; - u_char cha_b_data; - }; -# define scc ((*(volatile struct SCC*)SCC_BAS)) - -/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */ -# define st_escc ((*(volatile struct SCC*)0xfffffa31)) -# define st_escc_dsr ((*(volatile char *)0xfffffa39)) - -/* TT SCC DMA Controller (same chip as SCSI DMA) */ - -#define TT_SCC_DMA_BAS (0xffff8c00) -#define tt_scc_dma ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS)) - -/* -** VIDEL Palette Register - */ - -#define FPL_BAS (0xffff9800) -struct VIDEL_PALETTE - { - u_long reg[256]; - }; -# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS)) - - -/* -** Falcon DSP Host Interface - */ - -#define DSP56K_HOST_INTERFACE_BASE (0xffffa200) -struct DSP56K_HOST_INTERFACE { - u_char icr; -#define DSP56K_ICR_RREQ 0x01 -#define DSP56K_ICR_TREQ 0x02 -#define DSP56K_ICR_HF0 0x08 -#define DSP56K_ICR_HF1 0x10 -#define DSP56K_ICR_HM0 0x20 -#define DSP56K_ICR_HM1 0x40 -#define DSP56K_ICR_INIT 0x80 - - u_char cvr; -#define DSP56K_CVR_HV_MASK 0x1f -#define DSP56K_CVR_HC 0x80 - - u_char isr; -#define DSP56K_ISR_RXDF 0x01 -#define DSP56K_ISR_TXDE 0x02 -#define DSP56K_ISR_TRDY 0x04 -#define DSP56K_ISR_HF2 0x08 -#define DSP56K_ISR_HF3 0x10 -#define DSP56K_ISR_DMA 0x40 -#define DSP56K_ISR_HREQ 0x80 - - u_char ivr; - - union { - u_char b[4]; - u_short w[2]; - u_long l; - } data; -}; -#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE)) - -/* -** MFP 68901 - */ - -#define MFP_BAS (0xfffffa01) -struct MFP - { - u_char par_dt_reg; - u_char char_dummy1; - u_char active_edge; - u_char char_dummy2; - u_char data_dir; - u_char char_dummy3; - u_char int_en_a; - u_char char_dummy4; - u_char int_en_b; - u_char char_dummy5; - u_char int_pn_a; - u_char char_dummy6; - u_char int_pn_b; - u_char char_dummy7; - u_char int_sv_a; - u_char char_dummy8; - u_char int_sv_b; - u_char char_dummy9; - u_char int_mk_a; - u_char char_dummy10; - u_char int_mk_b; - u_char char_dummy11; - u_char vec_adr; - u_char char_dummy12; - u_char tim_ct_a; - u_char char_dummy13; - u_char tim_ct_b; - u_char char_dummy14; - u_char tim_ct_cd; - u_char char_dummy15; - u_char tim_dt_a; - u_char char_dummy16; - u_char tim_dt_b; - u_char char_dummy17; - u_char tim_dt_c; - u_char char_dummy18; - u_char tim_dt_d; - u_char char_dummy19; - u_char sync_char; - u_char char_dummy20; - u_char usart_ctr; - u_char char_dummy21; - u_char rcv_stat; - u_char char_dummy22; - u_char trn_stat; - u_char char_dummy23; - u_char usart_dta; - }; -# define mfp ((*(volatile struct MFP*)MFP_BAS)) - -/* TT's second MFP */ - -#define TT_MFP_BAS (0xfffffa81) -# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS)) - - -/* TT System Control Unit */ - -#define TT_SCU_BAS (0xffff8e01) -struct TT_SCU { - u_char sys_mask; - u_char char_dummy1; - u_char sys_stat; - u_char char_dummy2; - u_char softint; - u_char char_dummy3; - u_char vmeint; - u_char char_dummy4; - u_char gp_reg1; - u_char char_dummy5; - u_char gp_reg2; - u_char char_dummy6; - u_char vme_mask; - u_char char_dummy7; - u_char vme_stat; -}; -#define tt_scu ((*(volatile struct TT_SCU *)TT_SCU_BAS)) - -/* TT real time clock */ - -#define TT_RTC_BAS (0xffff8961) -struct TT_RTC { - u_char regsel; - u_char dummy; - u_char data; -}; -#define tt_rtc ((*(volatile struct TT_RTC *)TT_RTC_BAS)) - - -/* -** ACIA 6850 - */ -/* constants for the ACIA registers */ - -/* baudrate selection and reset (Baudrate = clock/factor) */ -#define ACIA_DIV1 0 -#define ACIA_DIV16 1 -#define ACIA_DIV64 2 -#define ACIA_RESET 3 - -/* character format */ -#define ACIA_D7E2S (0<<2) /* 7 data, even parity, 2 stop */ -#define ACIA_D7O2S (1<<2) /* 7 data, odd parity, 2 stop */ -#define ACIA_D7E1S (2<<2) /* 7 data, even parity, 1 stop */ -#define ACIA_D7O1S (3<<2) /* 7 data, odd parity, 1 stop */ -#define ACIA_D8N2S (4<<2) /* 8 data, no parity, 2 stop */ -#define ACIA_D8N1S (5<<2) /* 8 data, no parity, 1 stop */ -#define ACIA_D8E1S (6<<2) /* 8 data, even parity, 1 stop */ -#define ACIA_D8O1S (7<<2) /* 8 data, odd parity, 1 stop */ - -/* transmit control */ -#define ACIA_RLTID (0<<5) /* RTS low, TxINT disabled */ -#define ACIA_RLTIE (1<<5) /* RTS low, TxINT enabled */ -#define ACIA_RHTID (2<<5) /* RTS high, TxINT disabled */ -#define ACIA_RLTIDSB (3<<5) /* RTS low, TxINT disabled, send break */ - -/* receive control */ -#define ACIA_RID (0<<7) /* RxINT disabled */ -#define ACIA_RIE (1<<7) /* RxINT enabled */ - -/* status fields of the ACIA */ -#define ACIA_RDRF 1 /* Receive Data Register Full */ -#define ACIA_TDRE (1<<1) /* Transmit Data Register Empty */ -#define ACIA_DCD (1<<2) /* Data Carrier Detect */ -#define ACIA_CTS (1<<3) /* Clear To Send */ -#define ACIA_FE (1<<4) /* Framing Error */ -#define ACIA_OVRN (1<<5) /* Receiver Overrun */ -#define ACIA_PE (1<<6) /* Parity Error */ -#define ACIA_IRQ (1<<7) /* Interrupt Request */ - -#define ACIA_BAS (0xfffffc00) -struct ACIA - { - u_char key_ctrl; - u_char char_dummy1; - u_char key_data; - u_char char_dummy2; - u_char mid_ctrl; - u_char char_dummy3; - u_char mid_data; - }; -# define acia ((*(volatile struct ACIA*)ACIA_BAS)) - -#define TT_DMASND_BAS (0xffff8900) -struct TT_DMASND { - u_char int_ctrl; /* Falcon: Interrupt control */ - u_char ctrl; - u_char pad2; - u_char bas_hi; - u_char pad3; - u_char bas_mid; - u_char pad4; - u_char bas_low; - u_char pad5; - u_char addr_hi; - u_char pad6; - u_char addr_mid; - u_char pad7; - u_char addr_low; - u_char pad8; - u_char end_hi; - u_char pad9; - u_char end_mid; - u_char pad10; - u_char end_low; - u_char pad11[12]; - u_char track_select; /* Falcon */ - u_char mode; - u_char pad12[14]; - /* Falcon only: */ - u_short cbar_src; - u_short cbar_dst; - u_char ext_div; - u_char int_div; - u_char rec_track_select; - u_char dac_src; - u_char adc_src; - u_char input_gain; - u_short output_atten; -}; -# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS)) - -#define DMASND_MFP_INT_REPLAY 0x01 -#define DMASND_MFP_INT_RECORD 0x02 -#define DMASND_TIMERA_INT_REPLAY 0x04 -#define DMASND_TIMERA_INT_RECORD 0x08 - -#define DMASND_CTRL_OFF 0x00 -#define DMASND_CTRL_ON 0x01 -#define DMASND_CTRL_REPEAT 0x02 -#define DMASND_CTRL_RECORD_ON 0x10 -#define DMASND_CTRL_RECORD_OFF 0x00 -#define DMASND_CTRL_RECORD_REPEAT 0x20 -#define DMASND_CTRL_SELECT_REPLAY 0x00 -#define DMASND_CTRL_SELECT_RECORD 0x80 -#define DMASND_MODE_MONO 0x80 -#define DMASND_MODE_STEREO 0x00 -#define DMASND_MODE_8BIT 0x00 -#define DMASND_MODE_16BIT 0x40 /* Falcon only */ -#define DMASND_MODE_6KHZ 0x00 /* Falcon: mute */ -#define DMASND_MODE_12KHZ 0x01 -#define DMASND_MODE_25KHZ 0x02 -#define DMASND_MODE_50KHZ 0x03 - - -#define DMASNDSetBase(bufstart) \ - do { \ - tt_dmasnd.bas_hi = (unsigned char)(((bufstart) & 0xff0000) >> 16); \ - tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \ - tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \ - } while( 0 ) - -#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) + \ - (tt_dmasnd.addr_mid << 8) + \ - (tt_dmasnd.addr_low)) - -#define DMASNDSetEnd(bufend) \ - do { \ - tt_dmasnd.end_hi = (unsigned char)(((bufend) & 0xff0000) >> 16); \ - tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \ - tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \ - } while( 0 ) - - -#define TT_MICROWIRE_BAS (0xffff8922) -struct TT_MICROWIRE { - u_short data; - u_short mask; -}; -# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS)) - -#define MW_LM1992_ADDR 0x0400 - -#define MW_LM1992_VOLUME(dB) \ - (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2))) -#define MW_LM1992_BALLEFT(dB) \ - (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) -#define MW_LM1992_BALRIGHT(dB) \ - (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2))) -#define MW_LM1992_TREBLE(dB) \ - (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) -#define MW_LM1992_BASS(dB) \ - (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6))) - -#define MW_LM1992_PSG_LOW 0x000 -#define MW_LM1992_PSG_HIGH 0x001 -#define MW_LM1992_PSG_OFF 0x002 - -#define MSTE_RTC_BAS (0xfffffc21) - -struct MSTE_RTC { - u_char sec_ones; - u_char dummy1; - u_char sec_tens; - u_char dummy2; - u_char min_ones; - u_char dummy3; - u_char min_tens; - u_char dummy4; - u_char hr_ones; - u_char dummy5; - u_char hr_tens; - u_char dummy6; - u_char weekday; - u_char dummy7; - u_char day_ones; - u_char dummy8; - u_char day_tens; - u_char dummy9; - u_char mon_ones; - u_char dummy10; - u_char mon_tens; - u_char dummy11; - u_char year_ones; - u_char dummy12; - u_char year_tens; - u_char dummy13; - u_char mode; - u_char dummy14; - u_char test; - u_char dummy15; - u_char reset; -}; - -#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS)) - -#endif /* linux/atarihw.h */ - diff --git a/include/asm-m68k/atariints.h b/include/asm-m68k/atariints.h deleted file mode 100644 index 5748e99f4e2..00000000000 --- a/include/asm-m68k/atariints.h +++ /dev/null @@ -1,204 +0,0 @@ -/* -** atariints.h -- Atari Linux interrupt handling structs and prototypes -** -** Copyright 1994 by Björn Brauel -** -** 5/2/94 Roman Hodek: -** TT interrupt definitions added. -** -** 12/02/96: (Roman) -** Adapted to new int handling scheme (see ataints.c); revised numbering -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _LINUX_ATARIINTS_H_ -#define _LINUX_ATARIINTS_H_ - -#include -#include - -/* -** Atari Interrupt sources. -** -*/ - -#define STMFP_SOURCE_BASE 8 -#define TTMFP_SOURCE_BASE 24 -#define SCC_SOURCE_BASE 40 -#define VME_SOURCE_BASE 56 -#define VME_MAX_SOURCES 16 - -#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE) - -/* convert vector number to int source number */ -#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8))) - -/* convert irq_handler index to vector number */ -#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8))) - -/* interrupt service types */ -#define IRQ_TYPE_SLOW 0 -#define IRQ_TYPE_FAST 1 -#define IRQ_TYPE_PRIO 2 - -/* ST-MFP interrupts */ -#define IRQ_MFP_BUSY (8) -#define IRQ_MFP_DCD (9) -#define IRQ_MFP_CTS (10) -#define IRQ_MFP_GPU (11) -#define IRQ_MFP_TIMD (12) -#define IRQ_MFP_TIMC (13) -#define IRQ_MFP_ACIA (14) -#define IRQ_MFP_FDC (15) -#define IRQ_MFP_ACSI IRQ_MFP_FDC -#define IRQ_MFP_FSCSI IRQ_MFP_FDC -#define IRQ_MFP_IDE IRQ_MFP_FDC -#define IRQ_MFP_TIMB (16) -#define IRQ_MFP_SERERR (17) -#define IRQ_MFP_SEREMPT (18) -#define IRQ_MFP_RECERR (19) -#define IRQ_MFP_RECFULL (20) -#define IRQ_MFP_TIMA (21) -#define IRQ_MFP_RI (22) -#define IRQ_MFP_MMD (23) - -/* TT-MFP interrupts */ -#define IRQ_TT_MFP_IO0 (24) -#define IRQ_TT_MFP_IO1 (25) -#define IRQ_TT_MFP_SCC (26) -#define IRQ_TT_MFP_RI (27) -#define IRQ_TT_MFP_TIMD (28) -#define IRQ_TT_MFP_TIMC (29) -#define IRQ_TT_MFP_DRVRDY (30) -#define IRQ_TT_MFP_SCSIDMA (31) -#define IRQ_TT_MFP_TIMB (32) -#define IRQ_TT_MFP_SERERR (33) -#define IRQ_TT_MFP_SEREMPT (34) -#define IRQ_TT_MFP_RECERR (35) -#define IRQ_TT_MFP_RECFULL (36) -#define IRQ_TT_MFP_TIMA (37) -#define IRQ_TT_MFP_RTC (38) -#define IRQ_TT_MFP_SCSI (39) - -/* SCC interrupts */ -#define IRQ_SCCB_TX (40) -#define IRQ_SCCB_STAT (42) -#define IRQ_SCCB_RX (44) -#define IRQ_SCCB_SPCOND (46) -#define IRQ_SCCA_TX (48) -#define IRQ_SCCA_STAT (50) -#define IRQ_SCCA_RX (52) -#define IRQ_SCCA_SPCOND (54) - - -#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ -#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ - - -#define MFP_ENABLE 0 -#define MFP_PENDING 1 -#define MFP_SERVICE 2 -#define MFP_MASK 3 - -/* Utility functions for setting/clearing bits in the interrupt registers of - * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is - * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */ - -static inline int get_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - return( *reg & mask ); -} - -static inline void set_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - __asm__ __volatile__ ( "orb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); -} - -static inline void clear_mfp_bit( unsigned irq, int type ) - -{ unsigned char mask, *reg; - - mask = ~(1 << (irq & 7)); - reg = (unsigned char *)&mfp.int_en_a + type*4 + - ((irq & 8) >> 2) + (((irq-8) & 16) << 3); - if (type == MFP_PENDING || type == MFP_SERVICE) - __asm__ __volatile__ ( "moveb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); - else - __asm__ __volatile__ ( "andb %0,%1" - : : "di" (mask), "m" (*reg) : "memory" ); -} - -/* - * {en,dis}able_irq have the usual semantics of temporary blocking the - * interrupt, but not loosing requests that happen between disabling and - * enabling. This is done with the MFP mask registers. - */ - -static inline void atari_enable_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - set_mfp_bit( irq, MFP_MASK ); -} - -static inline void atari_disable_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_MASK ); -} - -/* - * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not - * "stored" - */ - -static inline void atari_turnon_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - set_mfp_bit( irq, MFP_ENABLE ); -} - -static inline void atari_turnoff_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_ENABLE ); - clear_mfp_bit( irq, MFP_PENDING ); -} - -static inline void atari_clear_pending_irq( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return; - clear_mfp_bit( irq, MFP_PENDING ); -} - -static inline int atari_irq_pending( unsigned irq ) - -{ - if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 ); - return( get_mfp_bit( irq, MFP_PENDING ) ); -} - -unsigned long atari_register_vme_int( void ); -void atari_unregister_vme_int( unsigned long ); - -#endif /* linux/atariints.h */ diff --git a/include/asm-m68k/atarikb.h b/include/asm-m68k/atarikb.h deleted file mode 100644 index 546e7da5804..00000000000 --- a/include/asm-m68k/atarikb.h +++ /dev/null @@ -1,46 +0,0 @@ -/* -** atarikb.h -- This header contains the prototypes of functions of -** the intelligent keyboard of the Atari needed by the -** mouse and joystick drivers. -** -** Copyright 1994 by Robert de Vries -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created: 20 Feb 1994 by Robert de Vries -*/ - -#ifndef _LINUX_ATARIKB_H -#define _LINUX_ATARIKB_H - -void ikbd_write(const char *, int); -void ikbd_mouse_button_action(int mode); -void ikbd_mouse_rel_pos(void); -void ikbd_mouse_abs_pos(int xmax, int ymax); -void ikbd_mouse_kbd_mode(int dx, int dy); -void ikbd_mouse_thresh(int x, int y); -void ikbd_mouse_scale(int x, int y); -void ikbd_mouse_pos_get(int *x, int *y); -void ikbd_mouse_pos_set(int x, int y); -void ikbd_mouse_y0_bot(void); -void ikbd_mouse_y0_top(void); -void ikbd_mouse_disable(void); -void ikbd_joystick_event_on(void); -void ikbd_joystick_event_off(void); -void ikbd_joystick_get_state(void); -void ikbd_joystick_disable(void); - -/* Hook for MIDI serial driver */ -extern void (*atari_MIDI_interrupt_hook) (void); -/* Hook for mouse driver */ -extern void (*atari_mouse_interrupt_hook) (char *); -/* Hook for keyboard inputdev driver */ -extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char); -/* Hook for mouse inputdev driver */ -extern void (*atari_input_mouse_interrupt_hook) (char *); - -int atari_keyb_init(void); - -#endif /* _LINUX_ATARIKB_H */ diff --git a/include/asm-m68k/atomic.h b/include/asm-m68k/atomic.h deleted file mode 100644 index eb0ab9d4ee7..00000000000 --- a/include/asm-m68k/atomic.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef __ARCH_M68K_ATOMIC__ -#define __ARCH_M68K_ATOMIC__ - -#include -#include - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * We do not have SMP m68k systems, so we don't have to deal with that. - */ - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -static inline void atomic_add(int i, atomic_t *v) -{ - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i)); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i)); -} - -static inline void atomic_inc(atomic_t *v) -{ - __asm__ __volatile__("addql #1,%0" : "+m" (*v)); -} - -static inline void atomic_dec(atomic_t *v) -{ - __asm__ __volatile__("subql #1,%0" : "+m" (*v)); -} - -static inline int atomic_dec_and_test(atomic_t *v) -{ - char c; - __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static inline int atomic_inc_and_test(atomic_t *v) -{ - char c; - __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -#ifdef CONFIG_RMW_INSNS - -static inline int atomic_add_return(int i, atomic_t *v) -{ - int t, tmp; - - __asm__ __volatile__( - "1: movel %2,%1\n" - " addl %3,%1\n" - " casl %2,%1,%0\n" - " jne 1b" - : "+m" (*v), "=&d" (t), "=&d" (tmp) - : "g" (i), "2" (atomic_read(v))); - return t; -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - int t, tmp; - - __asm__ __volatile__( - "1: movel %2,%1\n" - " subl %3,%1\n" - " casl %2,%1,%0\n" - " jne 1b" - : "+m" (*v), "=&d" (t), "=&d" (tmp) - : "g" (i), "2" (atomic_read(v))); - return t; -} - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -#else /* !CONFIG_RMW_INSNS */ - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned long flags; - int t; - - local_irq_save(flags); - t = atomic_read(v); - t += i; - atomic_set(v, t); - local_irq_restore(flags); - - return t; -} - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long flags; - int t; - - local_irq_save(flags); - t = atomic_read(v); - t -= i; - atomic_set(v, t); - local_irq_restore(flags); - - return t; -} - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - unsigned long flags; - int prev; - - local_irq_save(flags); - prev = atomic_read(v); - if (prev == old) - atomic_set(v, new); - local_irq_restore(flags); - return prev; -} - -static inline int atomic_xchg(atomic_t *v, int new) -{ - unsigned long flags; - int prev; - - local_irq_save(flags); - prev = atomic_read(v); - atomic_set(v, new); - local_irq_restore(flags); - return prev; -} - -#endif /* !CONFIG_RMW_INSNS */ - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -static inline int atomic_sub_and_test(int i, atomic_t *v) -{ - char c; - __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i)); - return c != 0; -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - char c; - __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i)); - return c != 0; -} - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); -} - -static inline void atomic_set_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); -} - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* __ARCH_M68K_ATOMIC __ */ diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h deleted file mode 100644 index 844d6d52204..00000000000 --- a/include/asm-m68k/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h deleted file mode 100644 index 9bde784e7ba..00000000000 --- a/include/asm-m68k/bitops.h +++ /dev/null @@ -1,464 +0,0 @@ -#ifndef _M68K_BITOPS_H -#define _M68K_BITOPS_H -/* - * Copyright 1992, Linus Torvalds. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include - -/* - * Require 68020 or better. - * - * They use the standard big-endian m680x0 bit ordering. - */ - -#define test_and_set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_set_bit(nr, vaddr) : \ - __generic_test_and_set_bit(nr, vaddr)) - -#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr) - -static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define set_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_set_bit(nr, vaddr) : \ - __generic_set_bit(nr, vaddr)) - -#define __set_bit(nr,vaddr) set_bit(nr,vaddr) - -static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bset %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfset %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_clear_bit(nr, vaddr) : \ - __generic_test_and_clear_bit(nr, vaddr)) - -#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr) - -static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -#define clear_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_clear_bit(nr, vaddr) : \ - __generic_clear_bit(nr, vaddr)) -#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr) - -static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfclr %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -#define test_and_change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_test_and_change_bit(nr, vaddr) : \ - __generic_test_and_change_bit(nr, vaddr)) - -#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr) -#define __change_bit(nr,vaddr) change_bit(nr,vaddr) - -static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - char retval; - - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (*p) - : "di" (nr & 7)); - - return retval; -} - -static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr) -{ - char retval; - - __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0" - : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory"); - - return retval; -} - -#define change_bit(nr,vaddr) \ - (__builtin_constant_p(nr) ? \ - __constant_change_bit(nr, vaddr) : \ - __generic_change_bit(nr, vaddr)) - -static inline void __constant_change_bit(int nr, unsigned long *vaddr) -{ - char *p = (char *)vaddr + (nr ^ 31) / 8; - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (*p) : "di" (nr & 7)); -} - -static inline void __generic_change_bit(int nr, unsigned long *vaddr) -{ - __asm__ __volatile__ ("bfchg %1{%0:#1}" - : : "d" (nr^31), "o" (*vaddr) : "memory"); -} - -static inline int test_bit(int nr, const unsigned long *vaddr) -{ - return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0; -} - -static inline int find_first_zero_bit(const unsigned long *vaddr, - unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned long num; - - if (!size) - return 0; - - size = (size + 31) >> 5; - while (!(num = ~*p++)) { - if (!--size) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - return ((long)p - (long)vaddr - 4) * 8 + res; -} - -static inline int find_next_zero_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = ~*p++ & (~0UL << bit); - offset -= bit; - - /* Look for zero in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); - offset += 32; - } - /* No zero yet, search remaining full bytes for a zero */ - res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; -} - -static inline int find_first_bit(const unsigned long *vaddr, unsigned size) -{ - const unsigned long *p = vaddr; - int res = 32; - unsigned long num; - - if (!size) - return 0; - - size = (size + 31) >> 5; - while (!(num = *p++)) { - if (!--size) - goto out; - } - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - res ^= 31; -out: - return ((long)p - (long)vaddr - 4) * 8 + res; -} - -static inline int find_next_bit(const unsigned long *vaddr, int size, - int offset) -{ - const unsigned long *p = vaddr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - unsigned long num = *p++ & (~0UL << bit); - offset -= bit; - - /* Look for one in first longword */ - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (num & -num)); - if (res < 32) - return offset + (res ^ 31); - offset += 32; - } - /* No one yet, search remaining full bytes for a one */ - res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8); - return offset + res; -} - -/* - * ffz = Find First Zero in word. Undefined if no zero exists, - * so code should check against ~0UL first.. - */ -static inline unsigned long ffz(unsigned long word) -{ - int res; - - __asm__ __volatile__ ("bfffo %1{#0,#0},%0" - : "=d" (res) : "d" (~word & -~word)); - return res ^ 31; -} - -#ifdef __KERNEL__ - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ - -static inline int ffs(int x) -{ - int cnt; - - asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x)); - - return 32 - cnt; -} -#define __ffs(x) (ffs(x) - 1) - -/* - * fls: find last bit set. - */ - -static inline int fls(int x) -{ - int cnt; - - asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x)); - - return 32 - cnt; -} - -static inline int __fls(int x) -{ - return fls(x) - 1; -} - -#include -#include -#include -#include - -/* Bitmap functions for the minix filesystem */ - -static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size) -{ - const unsigned short *p = vaddr, *addr = vaddr; - int res; - unsigned short num; - - if (!size) - return 0; - - size = (size >> 4) + ((size & 15) > 0); - while (*p++ == 0xffff) - { - if (--size == 0) - return (p - addr) << 4; - } - - num = ~*--p; - __asm__ __volatile__ ("bfffo %1{#16,#16},%0" - : "=d" (res) : "d" (num & -num)); - return ((p - addr) << 4) + (res ^ 31); -} - -#define minix_test_and_set_bit(nr, addr) __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr)) -#define minix_set_bit(nr,addr) __set_bit((nr) ^ 16, (unsigned long *)(addr)) -#define minix_test_and_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr)) - -static inline int minix_test_bit(int nr, const void *vaddr) -{ - const unsigned short *p = vaddr; - return (p[nr >> 4] & (1U << (nr & 15))) != 0; -} - -/* Bitmap functions for the ext2 filesystem. */ - -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) -#define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) - -static inline int ext2_test_bit(int nr, const void *vaddr) -{ - const unsigned char *p = vaddr; - return (p[nr >> 3] & (1U << (nr & 7))) != 0; -} - -static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res; - - if (!size) - return 0; - - size = (size >> 5) + ((size & 31) > 0); - while (*p++ == ~0UL) - { - if (--size == 0) - return (p - addr) << 5; - } - - --p; - for (res = 0; res < 32; res++) - if (!ext2_test_bit (res, p)) - break; - return (p - addr) * 32 + res; -} - -static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, - unsigned offset) -{ - const unsigned long *addr = vaddr; - const unsigned long *p = addr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - /* Look for zero in first longword */ - for (res = bit; res < 32; res++) - if (!ext2_test_bit (res, p)) - return (p - addr) * 32 + res; - p++; - } - /* No zero yet, search remaining full bytes for a zero */ - res = ext2_find_first_zero_bit (p, size - 32 * (p - addr)); - return (p - addr) * 32 + res; -} - -static inline int ext2_find_first_bit(const void *vaddr, unsigned size) -{ - const unsigned long *p = vaddr, *addr = vaddr; - int res; - - if (!size) - return 0; - - size = (size >> 5) + ((size & 31) > 0); - while (*p++ == 0UL) { - if (--size == 0) - return (p - addr) << 5; - } - - --p; - for (res = 0; res < 32; res++) - if (ext2_test_bit(res, p)) - break; - return (p - addr) * 32 + res; -} - -static inline int ext2_find_next_bit(const void *vaddr, unsigned size, - unsigned offset) -{ - const unsigned long *addr = vaddr; - const unsigned long *p = addr + (offset >> 5); - int bit = offset & 31UL, res; - - if (offset >= size) - return size; - - if (bit) { - /* Look for one in first longword */ - for (res = bit; res < 32; res++) - if (ext2_test_bit(res, p)) - return (p - addr) * 32 + res; - p++; - } - /* No set bit yet, search remaining full bytes for a set bit */ - res = ext2_find_first_bit(p, size - 32 * (p - addr)); - return (p - addr) * 32 + res; -} - -#endif /* __KERNEL__ */ - -#endif /* _M68K_BITOPS_H */ diff --git a/include/asm-m68k/blinken.h b/include/asm-m68k/blinken.h deleted file mode 100644 index 1a749cf7b06..00000000000 --- a/include/asm-m68k/blinken.h +++ /dev/null @@ -1,32 +0,0 @@ -/* -** asm/blinken.h -- m68k blinkenlights support (currently hp300 only) -** -** (c) 1998 Phil Blundell -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _M68K_BLINKEN_H -#define _M68K_BLINKEN_H - -#include -#include - -#define HP300_LEDS 0xf001ffff - -extern unsigned char ledstate; - -static __inline__ void blinken_leds(int on, int off) -{ - if (MACH_IS_HP300) - { - ledstate |= on; - ledstate &= ~off; - out_8(HP300_LEDS, ~ledstate); - } -} - -#endif diff --git a/include/asm-m68k/bootinfo.h b/include/asm-m68k/bootinfo.h deleted file mode 100644 index fb8a06b9ab6..00000000000 --- a/include/asm-m68k/bootinfo.h +++ /dev/null @@ -1,378 +0,0 @@ -/* -** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 09/29/92 by Greg Harp -** -** 5/2/94 Roman Hodek: -** Added bi_atari part of the machine dependent union bi_un; for now it -** contains just a model field to distinguish between TT and Falcon. -** 26/7/96 Roman Zippel: -** Renamed to setup.h; added some useful macros to allow gcc some -** optimizations if possible. -** 5/10/96 Geert Uytterhoeven: -** Redesign of the boot information structure; renamed to bootinfo.h again -** 27/11/96 Geert Uytterhoeven: -** Backwards compatibility with bootinfo interface version 1.0 -*/ - -#ifndef _M68K_BOOTINFO_H -#define _M68K_BOOTINFO_H - - - /* - * Bootinfo definitions - * - * This is an easily parsable and extendable structure containing all - * information to be passed from the bootstrap to the kernel. - * - * This way I hope to keep all future changes back/forewards compatible. - * Thus, keep your fingers crossed... - * - * This structure is copied right after the kernel bss by the bootstrap - * routine. - */ - -#ifndef __ASSEMBLY__ - -struct bi_record { - unsigned short tag; /* tag ID */ - unsigned short size; /* size of record (in bytes) */ - unsigned long data[0]; /* data */ -}; - -#endif /* __ASSEMBLY__ */ - - - /* - * Tag Definitions - * - * Machine independent tags start counting from 0x0000 - * Machine dependent tags start counting from 0x8000 - */ - -#define BI_LAST 0x0000 /* last record (sentinel) */ -#define BI_MACHTYPE 0x0001 /* machine type (u_long) */ -#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */ -#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */ -#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */ -#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */ - /* (struct mem_info) */ -#define BI_RAMDISK 0x0006 /* ramdisk address and size */ - /* (struct mem_info) */ -#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */ - /* (string) */ - - /* - * Amiga-specific tags - */ - -#define BI_AMIGA_MODEL 0x8000 /* model (u_long) */ -#define BI_AMIGA_AUTOCON 0x8001 /* AutoConfig device */ - /* (struct ConfigDev) */ -#define BI_AMIGA_CHIP_SIZE 0x8002 /* size of Chip RAM (u_long) */ -#define BI_AMIGA_VBLANK 0x8003 /* VBLANK frequency (u_char) */ -#define BI_AMIGA_PSFREQ 0x8004 /* power supply frequency (u_char) */ -#define BI_AMIGA_ECLOCK 0x8005 /* EClock frequency (u_long) */ -#define BI_AMIGA_CHIPSET 0x8006 /* native chipset present (u_long) */ -#define BI_AMIGA_SERPER 0x8007 /* serial port period (u_short) */ - - /* - * Atari-specific tags - */ - -#define BI_ATARI_MCH_COOKIE 0x8000 /* _MCH cookie from TOS (u_long) */ -#define BI_ATARI_MCH_TYPE 0x8001 /* special machine type (u_long) */ - /* (values are ATARI_MACH_* defines */ - -/* mch_cookie values (upper word) */ -#define ATARI_MCH_ST 0 -#define ATARI_MCH_STE 1 -#define ATARI_MCH_TT 2 -#define ATARI_MCH_FALCON 3 - -/* mch_type values */ -#define ATARI_MACH_NORMAL 0 /* no special machine type */ -#define ATARI_MACH_MEDUSA 1 /* Medusa 040 */ -#define ATARI_MACH_HADES 2 /* Hades 040 or 060 */ -#define ATARI_MACH_AB40 3 /* Afterburner040 on Falcon */ - - /* - * VME-specific tags - */ - -#define BI_VME_TYPE 0x8000 /* VME sub-architecture (u_long) */ -#define BI_VME_BRDINFO 0x8001 /* VME board information (struct) */ - -/* BI_VME_TYPE codes */ -#define VME_TYPE_TP34V 0x0034 /* Tadpole TP34V */ -#define VME_TYPE_MVME147 0x0147 /* Motorola MVME147 */ -#define VME_TYPE_MVME162 0x0162 /* Motorola MVME162 */ -#define VME_TYPE_MVME166 0x0166 /* Motorola MVME166 */ -#define VME_TYPE_MVME167 0x0167 /* Motorola MVME167 */ -#define VME_TYPE_MVME172 0x0172 /* Motorola MVME172 */ -#define VME_TYPE_MVME177 0x0177 /* Motorola MVME177 */ -#define VME_TYPE_BVME4000 0x4000 /* BVM Ltd. BVME4000 */ -#define VME_TYPE_BVME6000 0x6000 /* BVM Ltd. BVME6000 */ - -/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on - * Motorola VME boards. Contains board number, Bug version, board - * configuration options, etc. See include/asm/mvme16xhw.h for details. - */ - - - /* - * Macintosh-specific tags (all u_long) - */ - -#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */ -#define BI_MAC_VADDR 0x8001 /* Mac video base address */ -#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */ -#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */ -#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */ -#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */ -#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */ -#define BI_MAC_BTIME 0x8007 /* Mac boot time */ -#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */ -#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */ -#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */ -#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */ - - /* - * Macintosh hardware profile data - unused, see macintosh.h for - * resonable type values - */ - -#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */ -#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */ -#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */ -#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */ -#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */ -#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */ -#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */ -#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */ -#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */ -#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */ -#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */ -#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */ -#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */ -#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */ -#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */ -#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */ -#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */ -#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */ - - /* - * Mac: compatibility with old booter data format (temporarily) - * Fields unused with the new bootinfo can be deleted now; instead of - * adding new fields the struct might be splitted into a hardware address - * part and a hardware type part - */ - -#ifndef __ASSEMBLY__ - -struct mac_booter_data -{ - unsigned long videoaddr; - unsigned long videorow; - unsigned long videodepth; - unsigned long dimensions; - unsigned long args; - unsigned long boottime; - unsigned long gmtbias; - unsigned long bootver; - unsigned long videological; - unsigned long sccbase; - unsigned long id; - unsigned long memsize; - unsigned long serialmf; - unsigned long serialhsk; - unsigned long serialgpi; - unsigned long printmf; - unsigned long printhsk; - unsigned long printgpi; - unsigned long cpuid; - unsigned long rombase; - unsigned long adbdelay; - unsigned long timedbra; -}; - -extern struct mac_booter_data - mac_bi_data; - -#endif - - /* - * Apollo-specific tags - */ - -#define BI_APOLLO_MODEL 0x8000 /* model (u_long) */ - - /* - * HP300-specific tags - */ - -#define BI_HP300_MODEL 0x8000 /* model (u_long) */ -#define BI_HP300_UART_SCODE 0x8001 /* UART select code (u_long) */ -#define BI_HP300_UART_ADDR 0x8002 /* phys. addr of UART (u_long) */ - - /* - * Stuff for bootinfo interface versioning - * - * At the start of kernel code, a 'struct bootversion' is located. - * bootstrap checks for a matching version of the interface before booting - * a kernel, to avoid user confusion if kernel and bootstrap don't work - * together :-) - * - * If incompatible changes are made to the bootinfo interface, the major - * number below should be stepped (and the minor reset to 0) for the - * appropriate machine. If a change is backward-compatible, the minor - * should be stepped. "Backwards-compatible" means that booting will work, - * but certain features may not. - */ - -#define BOOTINFOV_MAGIC 0x4249561A /* 'BIV^Z' */ -#define MK_BI_VERSION(major,minor) (((major)<<16)+(minor)) -#define BI_VERSION_MAJOR(v) (((v) >> 16) & 0xffff) -#define BI_VERSION_MINOR(v) ((v) & 0xffff) - -#ifndef __ASSEMBLY__ - -struct bootversion { - unsigned short branch; - unsigned long magic; - struct { - unsigned long machtype; - unsigned long version; - } machversions[0]; -}; - -#endif /* __ASSEMBLY__ */ - -#define AMIGA_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define ATARI_BOOTI_VERSION MK_BI_VERSION( 2, 1 ) -#define MAC_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define MVME147_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define MVME16x_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define Q40_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) -#define HP300_BOOTI_VERSION MK_BI_VERSION( 2, 0 ) - -#ifdef BOOTINFO_COMPAT_1_0 - - /* - * Backwards compatibility with bootinfo interface version 1.0 - */ - -#define COMPAT_AMIGA_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) -#define COMPAT_ATARI_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) -#define COMPAT_MAC_BOOTI_VERSION MK_BI_VERSION( 1, 0 ) - -#include - -#define COMPAT_NUM_AUTO 16 - -struct compat_bi_Amiga { - int model; - int num_autocon; - struct ConfigDev autocon[COMPAT_NUM_AUTO]; - unsigned long chip_size; - unsigned char vblank; - unsigned char psfreq; - unsigned long eclock; - unsigned long chipset; - unsigned long hw_present; -}; - -struct compat_bi_Atari { - unsigned long hw_present; - unsigned long mch_cookie; -}; - -#ifndef __ASSEMBLY__ - -struct compat_bi_Macintosh -{ - unsigned long videoaddr; - unsigned long videorow; - unsigned long videodepth; - unsigned long dimensions; - unsigned long args; - unsigned long boottime; - unsigned long gmtbias; - unsigned long bootver; - unsigned long videological; - unsigned long sccbase; - unsigned long id; - unsigned long memsize; - unsigned long serialmf; - unsigned long serialhsk; - unsigned long serialgpi; - unsigned long printmf; - unsigned long printhsk; - unsigned long printgpi; - unsigned long cpuid; - unsigned long rombase; - unsigned long adbdelay; - unsigned long timedbra; -}; - -#endif - -struct compat_mem_info { - unsigned long addr; - unsigned long size; -}; - -#define COMPAT_NUM_MEMINFO 4 - -#define COMPAT_CPUB_68020 0 -#define COMPAT_CPUB_68030 1 -#define COMPAT_CPUB_68040 2 -#define COMPAT_CPUB_68060 3 -#define COMPAT_FPUB_68881 5 -#define COMPAT_FPUB_68882 6 -#define COMPAT_FPUB_68040 7 -#define COMPAT_FPUB_68060 8 - -#define COMPAT_CPU_68020 (1< - -#endif diff --git a/include/asm-m68k/bugs.h b/include/asm-m68k/bugs.h deleted file mode 100644 index d0193559241..00000000000 --- a/include/asm-m68k/bugs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-m68k/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -extern void check_bugs(void); /* in arch/m68k/kernel/setup.c */ diff --git a/include/asm-m68k/bvme6000hw.h b/include/asm-m68k/bvme6000hw.h deleted file mode 100644 index f40d2f8510e..00000000000 --- a/include/asm-m68k/bvme6000hw.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _M68K_BVME6000HW_H_ -#define _M68K_BVME6000HW_H_ - -#include - -/* - * PIT structure - */ - -#define BVME_PIT_BASE 0xffa00000 - -typedef struct { - unsigned char - pad_a[3], pgcr, - pad_b[3], psrr, - pad_c[3], paddr, - pad_d[3], pbddr, - pad_e[3], pcddr, - pad_f[3], pivr, - pad_g[3], pacr, - pad_h[3], pbcr, - pad_i[3], padr, - pad_j[3], pbdr, - pad_k[3], paar, - pad_l[3], pbar, - pad_m[3], pcdr, - pad_n[3], psr, - pad_o[3], res1, - pad_p[3], res2, - pad_q[3], tcr, - pad_r[3], tivr, - pad_s[3], res3, - pad_t[3], cprh, - pad_u[3], cprm, - pad_v[3], cprl, - pad_w[3], res4, - pad_x[3], crh, - pad_y[3], crm, - pad_z[3], crl, - pad_A[3], tsr, - pad_B[3], res5; -} PitRegs_t, *PitRegsPtr; - -#define bvmepit ((*(volatile PitRegsPtr)(BVME_PIT_BASE))) - -#define BVME_RTC_BASE 0xff900000 - -typedef struct { - unsigned char - pad_a[3], msr, - pad_b[3], t0cr_rtmr, - pad_c[3], t1cr_omr, - pad_d[3], pfr_icr0, - pad_e[3], irr_icr1, - pad_f[3], bcd_tenms, - pad_g[3], bcd_sec, - pad_h[3], bcd_min, - pad_i[3], bcd_hr, - pad_j[3], bcd_dom, - pad_k[3], bcd_mth, - pad_l[3], bcd_year, - pad_m[3], bcd_ujcc, - pad_n[3], bcd_hjcc, - pad_o[3], bcd_dow, - pad_p[3], t0lsb, - pad_q[3], t0msb, - pad_r[3], t1lsb, - pad_s[3], t1msb, - pad_t[3], cmp_sec, - pad_u[3], cmp_min, - pad_v[3], cmp_hr, - pad_w[3], cmp_dom, - pad_x[3], cmp_mth, - pad_y[3], cmp_dow, - pad_z[3], sav_sec, - pad_A[3], sav_min, - pad_B[3], sav_hr, - pad_C[3], sav_dom, - pad_D[3], sav_mth, - pad_E[3], ram, - pad_F[3], test; -} RtcRegs_t, *RtcPtr_t; - - -#define BVME_I596_BASE 0xff100000 - -#define BVME_ETHIRQ_REG 0xff20000b - -#define BVME_LOCAL_IRQ_STAT 0xff20000f - -#define BVME_ETHERR 0x02 -#define BVME_ABORT_STATUS 0x08 - -#define BVME_NCR53C710_BASE 0xff000000 - -#define BVME_SCC_A_ADDR 0xffb0000b -#define BVME_SCC_B_ADDR 0xffb00003 -#define BVME_SCC_RTxC 7372800 - -#define BVME_CONFIG_REG 0xff500003 - -#define config_reg_ptr (volatile unsigned char *)BVME_CONFIG_REG - -#define BVME_CONFIG_SW1 0x08 -#define BVME_CONFIG_SW2 0x04 -#define BVME_CONFIG_SW3 0x02 -#define BVME_CONFIG_SW4 0x01 - - -#define BVME_IRQ_TYPE_PRIO 0 - -#define BVME_IRQ_PRN (IRQ_USER+20) -#define BVME_IRQ_TIMER (IRQ_USER+25) -#define BVME_IRQ_I596 IRQ_AUTO_2 -#define BVME_IRQ_SCSI IRQ_AUTO_3 -#define BVME_IRQ_RTC IRQ_AUTO_6 -#define BVME_IRQ_ABORT IRQ_AUTO_7 - -/* SCC interrupts */ -#define BVME_IRQ_SCC_BASE IRQ_USER -#define BVME_IRQ_SCCB_TX IRQ_USER -#define BVME_IRQ_SCCB_STAT (IRQ_USER+2) -#define BVME_IRQ_SCCB_RX (IRQ_USER+4) -#define BVME_IRQ_SCCB_SPCOND (IRQ_USER+6) -#define BVME_IRQ_SCCA_TX (IRQ_USER+8) -#define BVME_IRQ_SCCA_STAT (IRQ_USER+10) -#define BVME_IRQ_SCCA_RX (IRQ_USER+12) -#define BVME_IRQ_SCCA_SPCOND (IRQ_USER+14) - -/* Address control registers */ - -#define BVME_ACR_A32VBA 0xff400003 -#define BVME_ACR_A32MSK 0xff410003 -#define BVME_ACR_A24VBA 0xff420003 -#define BVME_ACR_A24MSK 0xff430003 -#define BVME_ACR_A16VBA 0xff440003 -#define BVME_ACR_A32LBA 0xff450003 -#define BVME_ACR_A24LBA 0xff460003 -#define BVME_ACR_ADDRCTL 0xff470003 - -#define bvme_acr_a32vba *(volatile unsigned char *)BVME_ACR_A32VBA -#define bvme_acr_a32msk *(volatile unsigned char *)BVME_ACR_A32MSK -#define bvme_acr_a24vba *(volatile unsigned char *)BVME_ACR_A24VBA -#define bvme_acr_a24msk *(volatile unsigned char *)BVME_ACR_A24MSK -#define bvme_acr_a16vba *(volatile unsigned char *)BVME_ACR_A16VBA -#define bvme_acr_a32lba *(volatile unsigned char *)BVME_ACR_A32LBA -#define bvme_acr_a24lba *(volatile unsigned char *)BVME_ACR_A24LBA -#define bvme_acr_addrctl *(volatile unsigned char *)BVME_ACR_ADDRCTL - -#endif diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h deleted file mode 100644 index 300866523b8..00000000000 --- a/include/asm-m68k/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68K_BYTEORDER_H -#define _M68K_BYTEORDER_H - -#include -#include - -#endif /* _M68K_BYTEORDER_H */ diff --git a/include/asm-m68k/cache.h b/include/asm-m68k/cache.h deleted file mode 100644 index fed3fd30de7..00000000000 --- a/include/asm-m68k/cache.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-m68k/cache.h - */ -#ifndef __ARCH_M68K_CACHE_H -#define __ARCH_M68K_CACHE_H - -/* bytes per L1 cache line */ -#define L1_CACHE_SHIFT 4 -#define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT) - -#endif diff --git a/include/asm-m68k/cachectl.h b/include/asm-m68k/cachectl.h deleted file mode 100644 index 525978e959e..00000000000 --- a/include/asm-m68k/cachectl.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _M68K_CACHECTL_H -#define _M68K_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define FLUSH_SCOPE_LINE 1 /* Flush a cache line */ -#define FLUSH_SCOPE_PAGE 2 /* Flush a page */ -#define FLUSH_SCOPE_ALL 3 /* Flush the whole cache -- superuser only */ - -#define FLUSH_CACHE_DATA 1 /* Writeback and flush data cache */ -#define FLUSH_CACHE_INSN 2 /* Flush instruction cache */ -#define FLUSH_CACHE_BOTH 3 /* Flush both caches */ - -#endif /* _M68K_CACHECTL_H */ diff --git a/include/asm-m68k/cacheflush.h b/include/asm-m68k/cacheflush.h deleted file mode 100644 index 16bf375fdbe..00000000000 --- a/include/asm-m68k/cacheflush.h +++ /dev/null @@ -1,156 +0,0 @@ -#ifndef _M68K_CACHEFLUSH_H -#define _M68K_CACHEFLUSH_H - -#include - -/* cache code */ -#define FLUSH_I_AND_D (0x00000808) -#define FLUSH_I (0x00000008) - -/* - * Cache handling functions - */ - -static inline void flush_icache(void) -{ - if (CPU_IS_040_OR_060) - asm volatile ( "nop\n" - " .chip 68040\n" - " cpusha %bc\n" - " .chip 68k"); - else { - unsigned long tmp; - asm volatile ( "movec %%cacr,%0\n" - " or.w %1,%0\n" - " movec %0,%%cacr" - : "=&d" (tmp) - : "id" (FLUSH_I)); - } -} - -/* - * invalidate the cache for the specified memory range. - * It starts at the physical address specified for - * the given number of bytes. - */ -extern void cache_clear(unsigned long paddr, int len); -/* - * push any dirty cache in the specified memory range. - * It starts at the physical address specified for - * the given number of bytes. - */ -extern void cache_push(unsigned long paddr, int len); - -/* - * push and invalidate pages in the specified user virtual - * memory range. - */ -extern void cache_push_v(unsigned long vaddr, int len); - -/* This is needed whenever the virtual mapping of the current - process changes. */ -#define __flush_cache_all() \ -({ \ - if (CPU_IS_040_OR_060) \ - __asm__ __volatile__("nop\n\t" \ - ".chip 68040\n\t" \ - "cpusha %dc\n\t" \ - ".chip 68k"); \ - else { \ - unsigned long _tmp; \ - __asm__ __volatile__("movec %%cacr,%0\n\t" \ - "orw %1,%0\n\t" \ - "movec %0,%%cacr" \ - : "=&d" (_tmp) \ - : "di" (FLUSH_I_AND_D)); \ - } \ -}) - -#define __flush_cache_030() \ -({ \ - if (CPU_IS_020_OR_030) { \ - unsigned long _tmp; \ - __asm__ __volatile__("movec %%cacr,%0\n\t" \ - "orw %1,%0\n\t" \ - "movec %0,%%cacr" \ - : "=&d" (_tmp) \ - : "di" (FLUSH_I_AND_D)); \ - } \ -}) - -#define flush_cache_all() __flush_cache_all() - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -static inline void flush_cache_mm(struct mm_struct *mm) -{ - if (mm == current->mm) - __flush_cache_030(); -} - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -/* flush_cache_range/flush_cache_page must be macros to avoid - a dependency on linux/mm.h, which includes this file... */ -static inline void flush_cache_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end) -{ - if (vma->vm_mm == current->mm) - __flush_cache_030(); -} - -static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn) -{ - if (vma->vm_mm == current->mm) - __flush_cache_030(); -} - - -/* Push the page at kernel virtual address and clear the icache */ -/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ -static inline void __flush_page_to_ram(void *vaddr) -{ - if (CPU_IS_040_OR_060) { - __asm__ __volatile__("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (__pa(vaddr))); - } else { - unsigned long _tmp; - __asm__ __volatile__("movec %%cacr,%0\n\t" - "orw %1,%0\n\t" - "movec %0,%%cacr" - : "=&d" (_tmp) - : "di" (FLUSH_I)); - } -} - -#define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) - -extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long addr, int len); -extern void flush_icache_range(unsigned long address, unsigned long endaddr); - -static inline void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, void *src, int len) -{ - flush_cache_page(vma, vaddr, page_to_pfn(page)); - memcpy(dst, src, len); - flush_icache_user_range(vma, page, vaddr, len); -} -static inline void copy_from_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, - void *dst, void *src, int len) -{ - flush_cache_page(vma, vaddr, page_to_pfn(page)); - memcpy(dst, src, len); -} - -#endif /* _M68K_CACHEFLUSH_H */ diff --git a/include/asm-m68k/checksum.h b/include/asm-m68k/checksum.h deleted file mode 100644 index 494f9aec37e..00000000000 --- a/include/asm-m68k/checksum.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, - int len, __wsum sum, - int *csum_err); - -extern __wsum csum_partial_copy_nocheck(const void *src, - void *dst, int len, - __wsum sum); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum = 0; - unsigned long tmp; - - __asm__ ("subqw #1,%2\n" - "1:\t" - "movel %1@+,%3\n\t" - "addxl %3,%0\n\t" - "dbra %2,1b\n\t" - "movel %0,%3\n\t" - "swap %3\n\t" - "addxw %3,%0\n\t" - "clrw %3\n\t" - "addxw %3,%0\n\t" - : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) - : "0" (sum), "1" (iph), "2" (ihl) - : "memory"); - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (tmp)); - return (__force __sum16)~sum; -} - - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %2,%0\n\t" - "addxl %3,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=d" (saddr) - : "g" (daddr), "1" (saddr), "d" (len + proto), - "0" (sum)); - return sum; -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h deleted file mode 100644 index d1ea750bddf..00000000000 --- a/include/asm-m68k/contregs.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _M68K_CONTREGS_H -#define _M68K_CONTREGS_H - -/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address - * space. These are for the mmu's context register, etc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* 3=sun3 - 4=sun4 (as in sun4 sysmaint student book) - c=sun4c (according to davem) */ - -#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ -#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ -#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ -#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ -#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ -#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ -#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ -#define AC_SYNC_ERR 0x60000000 /* c fault type */ -#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ -#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ -#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ -#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ -#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ -#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ -#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ -#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ -#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ - -/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ -#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ -#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ -#define AC_M_CXR 0x0200 /* shv Context Register */ -#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ -#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ -#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ -#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ -#define AC_M_RESET 0x0700 /* hv Reset Reg */ -#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ -#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ -#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ -#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ -#define AC_M_ITR 0x1300 /* hv Index Tag Register */ -#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ -#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ -#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ -#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ -#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ -#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ - -#endif /* _M68K_CONTREGS_H */ diff --git a/include/asm-m68k/cputime.h b/include/asm-m68k/cputime.h deleted file mode 100644 index c79c5e89230..00000000000 --- a/include/asm-m68k/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include - -#endif /* __M68K_CPUTIME_H */ diff --git a/include/asm-m68k/current.h b/include/asm-m68k/current.h deleted file mode 100644 index 8de8f8ceda6..00000000000 --- a/include/asm-m68k/current.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_CURRENT_H -#define _M68K_CURRENT_H - -register struct task_struct *current __asm__("%a2"); - -#endif /* !(_M68K_CURRENT_H) */ diff --git a/include/asm-m68k/delay.h b/include/asm-m68k/delay.h deleted file mode 100644 index 5ed92851bc6..00000000000 --- a/include/asm-m68k/delay.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _M68K_DELAY_H -#define _M68K_DELAY_H - -#include - -/* - * Copyright (C) 1994 Hamish Macdonald - * - * Delay routines, using a pre-computed "loops_per_jiffy" value. - */ - -static inline void __delay(unsigned long loops) -{ - __asm__ __volatile__ ("1: subql #1,%0; jcc 1b" - : "=d" (loops) : "0" (loops)); -} - -extern void __bad_udelay(void); - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ -static inline void __const_udelay(unsigned long xloops) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1" - : "=d" (xloops), "=d" (tmp) - : "d" (xloops), "1" (loops_per_jiffy)); - __delay(xloops * HZ); -} - -static inline void __udelay(unsigned long usecs) -{ - __const_udelay(usecs * 4295); /* 2**32 / 1000000 */ -} - -#define udelay(n) (__builtin_constant_p(n) ? \ - ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \ - __udelay(n)) - -static inline unsigned long muldiv(unsigned long a, unsigned long b, - unsigned long c) -{ - unsigned long tmp; - - __asm__ ("mulul %2,%0:%1; divul %3,%0:%1" - : "=d" (tmp), "=d" (a) - : "d" (b), "d" (c), "1" (a)); - return a; -} - -#endif /* defined(_M68K_DELAY_H) */ diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/include/asm-m68k/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h deleted file mode 100644 index 8243c931b5c..00000000000 --- a/include/asm-m68k/div64.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _M68K_DIV64_H -#define _M68K_DIV64_H - -#include - -/* n = n / base; return rem; */ - -#define do_div(n, base) ({ \ - union { \ - unsigned long n32[2]; \ - unsigned long long n64; \ - } __n; \ - unsigned long __rem, __upper; \ - \ - __n.n64 = (n); \ - if ((__upper = __n.n32[0])) { \ - asm ("divul.l %2,%1:%0" \ - : "=d" (__n.n32[0]), "=d" (__upper) \ - : "d" (base), "0" (__n.n32[0])); \ - } \ - asm ("divu.l %2,%1:%0" \ - : "=d" (__n.n32[1]), "=d" (__rem) \ - : "d" (base), "1" (__upper), "0" (__n.n32[1])); \ - (n) = __n.n64; \ - __rem; \ -}) - -#endif /* _M68K_DIV64_H */ diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h deleted file mode 100644 index 26f505488c1..00000000000 --- a/include/asm-m68k/dma-mapping.h +++ /dev/null @@ -1,112 +0,0 @@ -#ifndef _M68K_DMA_MAPPING_H -#define _M68K_DMA_MAPPING_H - -#include - -struct scatterlist; - -#ifndef CONFIG_MMU_SUN3 -static inline int dma_supported(struct device *dev, u64 mask) -{ - return 1; -} - -static inline int dma_set_mask(struct device *dev, u64 mask) -{ - return 0; -} - -static inline int dma_get_cache_alignment(void) -{ - return 1 << L1_CACHE_SHIFT; -} - -static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 0; -} - -extern void *dma_alloc_coherent(struct device *, size_t, - dma_addr_t *, gfp_t); -extern void dma_free_coherent(struct device *, size_t, - void *, dma_addr_t); - -static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) -{ - return dma_alloc_coherent(dev, size, handle, flag); -} -static inline void dma_free_noncoherent(struct device *dev, size_t size, - void *addr, dma_addr_t handle) -{ - dma_free_coherent(dev, size, addr, handle); -} -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - /* we use coherent allocation, so not much to do here. */ -} - -extern dma_addr_t dma_map_single(struct device *, void *, size_t, - enum dma_data_direction); -static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, - size_t size, enum dma_data_direction dir) -{ -} - -extern dma_addr_t dma_map_page(struct device *, struct page *, - unsigned long, size_t size, - enum dma_data_direction); -static inline void dma_unmap_page(struct device *dev, dma_addr_t address, - size_t size, enum dma_data_direction dir) -{ -} - -extern int dma_map_sg(struct device *, struct scatterlist *, int, - enum dma_data_direction); -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction dir) -{ -} - -extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t, - enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, - enum dma_data_direction); - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_device(dev, dma_handle, offset + size, direction); -} - -static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir) -{ -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t handle) -{ - return 0; -} - -#else -#include -#endif - -#endif /* _M68K_DMA_MAPPING_H */ diff --git a/include/asm-m68k/dma.h b/include/asm-m68k/dma.h deleted file mode 100644 index 4240fbc946f..00000000000 --- a/include/asm-m68k/dma.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - - -/* it's useless on the m68k, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -#define MAX_DMA_CHANNELS 8 - -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#define isa_dma_bridge_buggy (0) - -#endif /* _M68K_DMA_H */ diff --git a/include/asm-m68k/dsp56k.h b/include/asm-m68k/dsp56k.h deleted file mode 100644 index 2d8c0c9f794..00000000000 --- a/include/asm-m68k/dsp56k.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-m68k/dsp56k.h - defines and declarations for - * DSP56k device driver - * - * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - - -/* Used for uploading DSP binary code */ -struct dsp56k_upload { - int len; - char __user *bin; -}; - -/* For the DSP host flags */ -struct dsp56k_host_flags { - int dir; /* Bit field. 1 = write output bit, 0 = do nothing. - * 0x0000 means reading only, 0x0011 means - * writing the bits stored in `out' on HF0 and HF1. - * Note that HF2 and HF3 can only be read. - */ - int out; /* Bit field like above. */ - int status; /* Host register's current state is returned */ -}; - -/* ioctl command codes */ -#define DSP56K_UPLOAD 1 /* Upload DSP binary program */ -#define DSP56K_SET_TX_WSIZE 2 /* Host transmit word size (1-4) */ -#define DSP56K_SET_RX_WSIZE 3 /* Host receive word size (1-4) */ -#define DSP56K_HOST_FLAGS 4 /* Host flag registers */ -#define DSP56K_HOST_CMD 5 /* Trig Host Command (0-31) */ diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h deleted file mode 100644 index 890bbf7e775..00000000000 --- a/include/asm-m68k/dvma.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * include/asm-m68k/dma.h - * - * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu) - * - * Hacked to fit Sun3x needs by Thomas Bogendoerfer - */ - -#ifndef __M68K_DVMA_H -#define __M68K_DVMA_H - - -#define DVMA_PAGE_SHIFT 13 -#define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT) -#define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1)) -#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE) - -extern void dvma_init(void); -extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr, - int len); - -#define dvma_malloc(x) dvma_malloc_align(x, 0) -#define dvma_map(x, y) dvma_map_align(x, y, 0) -#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff) -#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff) -extern unsigned long dvma_map_align(unsigned long kaddr, int len, - int align); -extern void *dvma_malloc_align(unsigned long len, unsigned long align); - -extern void dvma_unmap(void *baddr); -extern void dvma_free(void *vaddr); - - -#ifdef CONFIG_SUN3 -/* sun3 dvma page support */ - -/* memory and pmegs potentially reserved for dvma */ -#define DVMA_PMEG_START 10 -#define DVMA_PMEG_END 16 -#define DVMA_START 0xf00000 -#define DVMA_END 0xfe0000 -#define DVMA_SIZE (DVMA_END-DVMA_START) -#define IOMMU_TOTAL_ENTRIES 128 -#define IOMMU_ENTRIES 120 - -/* empirical kludge -- dvma regions only seem to work right on 0x10000 - byte boundaries */ -#define DVMA_REGION_SIZE 0x10000 -#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \ - ~(DVMA_REGION_SIZE-1)) - -/* virt <-> phys conversions */ -#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff) -#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000) -#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff) -#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000) -#define dvma_vtob(x) dvma_vtop(x) -#define dvma_btov(x) dvma_ptov(x) - -static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, - int len) -{ - return 0; -} - -#else /* Sun3x */ - -/* sun3x dvma page support */ - -#define DVMA_START 0x0 -#define DVMA_END 0xf00000 -#define DVMA_SIZE (DVMA_END-DVMA_START) -#define IOMMU_TOTAL_ENTRIES 2048 -/* the prom takes the top meg */ -#define IOMMU_ENTRIES (IOMMU_TOTAL_ENTRIES - 0x80) - -#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff) -#define dvma_btov(x) ((unsigned long)(x) | 0xff000000) - -extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len); - - - -/* everything below this line is specific to dma used for the onboard - ESP scsi on sun3x */ - -/* Structure to describe the current status of DMA registers on the Sparc */ -struct sparc_dma_registers { - __volatile__ unsigned long cond_reg; /* DMA condition register */ - __volatile__ unsigned long st_addr; /* Start address of this transfer */ - __volatile__ unsigned long cnt; /* How many bytes to transfer */ - __volatile__ unsigned long dma_test; /* DMA test register */ -}; - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct Linux_SBus_DMA { - struct Linux_SBus_DMA *next; - struct linux_sbus_device *SBus_dev; - struct sparc_dma_registers *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - unsigned long addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct Linux_SBus_DMA *dma_chain; - -/* Broken hardware... */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURST8 0x00040000 /* ENET: SBUS r/w burst size */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) -#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) -#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) -#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) -#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) -#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) -#define DMA_BEGINDMA_W(regs) \ - ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) -#define DMA_BEGINDMA_R(regs) \ - ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -/* Reset the friggin' thing... */ -#define DMA_RESET(dma) do { \ - struct sparc_dma_registers *regs = dma->regs; \ - /* Let the current FIFO drain itself */ \ - sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ - /* Reset the logic */ \ - regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ - __delay(400); /* let the bits set ;) */ \ - regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ - sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ - /* Enable FAST transfers if available */ \ - if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ - dma->running = 0; \ -} while(0) - - -#endif /* !CONFIG_SUN3 */ - -#endif /* !(__M68K_DVMA_H) */ diff --git a/include/asm-m68k/elf.h b/include/asm-m68k/elf.h deleted file mode 100644 index 0b0f49eb876..00000000000 --- a/include/asm-m68k/elf.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ASMm68k_ELF_H -#define __ASMm68k_ELF_H - -/* - * ELF register definitions.. - */ - -#include -#include - -/* - * 68k ELF relocation types - */ -#define R_68K_NONE 0 -#define R_68K_32 1 -#define R_68K_16 2 -#define R_68K_8 3 -#define R_68K_PC32 4 -#define R_68K_PC16 5 -#define R_68K_PC8 6 -#define R_68K_GOT32 7 -#define R_68K_GOT16 8 -#define R_68K_GOT8 9 -#define R_68K_GOT32O 10 -#define R_68K_GOT16O 11 -#define R_68K_GOT8O 12 -#define R_68K_PLT32 13 -#define R_68K_PLT16 14 -#define R_68K_PLT8 15 -#define R_68K_PLT32O 16 -#define R_68K_PLT16O 17 -#define R_68K_PLT8O 18 -#define R_68K_COPY 19 -#define R_68K_GLOB_DAT 20 -#define R_68K_JMP_SLOT 21 -#define R_68K_RELATIVE 22 - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_m68kfp_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_68K) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_68K - -/* For SVR4/m68k the function pointer to be registered with `atexit' is - passed in %a1. Although my copy of the ABI has no such statement, it - is actually used on ASV. */ -#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - -#define USE_ELF_CORE_DUMP -#ifndef CONFIG_SUN3 -#define ELF_EXEC_PAGESIZE 4096 -#else -#define ELF_EXEC_PAGESIZE 8192 -#endif - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#ifndef CONFIG_SUN3 -#define ELF_ET_DYN_BASE 0xD0000000UL -#else -#define ELF_ET_DYN_BASE 0x0D800000UL -#endif - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - /* Bleech. */ \ - pr_reg[0] = regs->d1; \ - pr_reg[1] = regs->d2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d4; \ - pr_reg[4] = regs->d5; \ - pr_reg[7] = regs->a0; \ - pr_reg[8] = regs->a1; \ - pr_reg[9] = regs->a2; \ - pr_reg[14] = regs->d0; \ - pr_reg[15] = rdusp(); \ - pr_reg[16] = regs->orig_d0; \ - pr_reg[17] = regs->sr; \ - pr_reg[18] = regs->pc; \ - pr_reg[19] = (regs->format << 12) | regs->vector; \ - { \ - struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ - pr_reg[5] = sw->d6; \ - pr_reg[6] = sw->d7; \ - pr_reg[10] = sw->a3; \ - pr_reg[11] = sw->a4; \ - pr_reg[12] = sw->a5; \ - pr_reg[13] = sw->a6; \ - } - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-m68k/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-m68k/entry.h b/include/asm-m68k/entry.h deleted file mode 100644 index 5202f5a5b42..00000000000 --- a/include/asm-m68k/entry.h +++ /dev/null @@ -1,137 +0,0 @@ -#ifndef __M68K_ENTRY_H -#define __M68K_ENTRY_H - -#include -#include - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - sr - * 2E(sp) - pc - * 32(sp) - format & vector - */ - -/* - * 97/05/14 Andreas: Register %a2 is now set to the current task throughout - * the whole kernel. - */ - -/* the following macro is used when enabling interrupts */ -#if defined(MACH_ATARI_ONLY) - /* block out HSYNC on the atari */ -#define ALLOWINT (~0x400) -#define MAX_NOINT_IPL 3 -#else - /* portable version */ -#define ALLOWINT (~0x700) -#define MAX_NOINT_IPL 0 -#endif /* machine compilation types */ - -#ifdef __ASSEMBLY__ - -#define curptr a2 - -LFLUSH_I_AND_D = 0x00000808 -LSIGTRAP = 5 - -/* process bits for task_struct.ptrace */ -PT_TRACESYS_OFF = 3 -PT_TRACESYS_BIT = 1 -PT_PTRACED_OFF = 3 -PT_PTRACED_BIT = 0 -PT_DTRACE_OFF = 3 -PT_DTRACE_BIT = 2 - -#define SAVE_ALL_INT save_all_int -#define SAVE_ALL_SYS save_all_sys -#define RESTORE_ALL restore_all -/* - * This defines the normal kernel pt-regs layout. - * - * regs a3-a6 and d6-d7 are preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -/* - * a -1 in the orig_d0 field signifies - * that the stack frame is NOT for syscall - */ -.macro save_all_int - clrl %sp@- | stk_adj - pea -1:w | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro save_all_sys - clrl %sp@- | stk_adj - movel %d0,%sp@- | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro restore_all - moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp | orig d0 - addl %sp@+,%sp | stk adj - rte -.endm - -#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ - -#define SAVE_SWITCH_STACK save_switch_stack -#define RESTORE_SWITCH_STACK restore_switch_stack -#define GET_CURRENT(tmp) get_current tmp - -.macro save_switch_stack - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro restore_switch_stack - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -.macro get_current reg=%d0 - movel %sp,\reg - andw #-THREAD_SIZE,\reg - movel \reg,%curptr - movel %curptr@,%curptr -.endm - -#else /* C source */ - -#define STR(X) STR1(X) -#define STR1(X) #X - -#define PT_OFF_ORIG_D0 0x24 -#define PT_OFF_FORMATVEC 0x32 -#define PT_OFF_SR 0x2C -#define SAVE_ALL_INT \ - "clrl %%sp@-;" /* stk_adj */ \ - "pea -1:w;" /* orig d0 = -1 */ \ - "movel %%d0,%%sp@-;" /* d0 */ \ - "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" -#define GET_CURRENT(tmp) \ - "movel %%sp,"#tmp"\n\t" \ - "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ - "movel "#tmp",%%a2\n\t" \ - "movel %%a2@,%%a2" - -#endif - -#endif /* __M68K_ENTRY_H */ diff --git a/include/asm-m68k/errno.h b/include/asm-m68k/errno.h deleted file mode 100644 index 0d4e188d6ef..00000000000 --- a/include/asm-m68k/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include - -#endif /* _M68K_ERRNO_H */ diff --git a/include/asm-m68k/fb.h b/include/asm-m68k/fb.h deleted file mode 100644 index 380b97ae815..00000000000 --- a/include/asm-m68k/fb.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include -#include - -#ifdef CONFIG_SUN3 -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE; -} -#else -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - if (CPU_IS_020_OR_030) - pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030; - if (CPU_IS_040_OR_060) { - pgprot_val(vma->vm_page_prot) &= _CACHEMASK040; - /* Use no-cache mode, serialized */ - pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S; - } -} -#endif /* CONFIG_SUN3 */ - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h deleted file mode 100644 index b9215a0907d..00000000000 --- a/include/asm-m68k/fbio.h +++ /dev/null @@ -1,330 +0,0 @@ -#ifndef __LINUX_FBIO_H -#define __LINUX_FBIO_H - -#include -#include - -/* Constants used for fbio SunOS compatibility */ -/* (C) 1996 Miguel de Icaza */ - -/* Frame buffer types */ -#define FBTYPE_NOTYPE -1 -#define FBTYPE_SUN1BW 0 /* mono */ -#define FBTYPE_SUN1COLOR 1 -#define FBTYPE_SUN2BW 2 -#define FBTYPE_SUN2COLOR 3 -#define FBTYPE_SUN2GP 4 -#define FBTYPE_SUN5COLOR 5 -#define FBTYPE_SUN3COLOR 6 -#define FBTYPE_MEMCOLOR 7 -#define FBTYPE_SUN4COLOR 8 - -#define FBTYPE_NOTSUN1 9 -#define FBTYPE_NOTSUN2 10 -#define FBTYPE_NOTSUN3 11 - -#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ -#define FBTYPE_SUNROP_COLOR 13 -#define FBTYPE_SUNFB_VIDEO 14 -#define FBTYPE_SUNGIFB 15 -#define FBTYPE_SUNGPLAS 16 -#define FBTYPE_SUNGP3 17 -#define FBTYPE_SUNGT 18 -#define FBTYPE_SUNLEO 19 /* zx Leo card */ -#define FBTYPE_MDICOLOR 20 /* cg14 */ -#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ - -#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ - -/* Does not seem to be listed in the Sun file either */ -#define FBTYPE_CREATOR 22 -#define FBTYPE_PCI_IGA1682 23 -#define FBTYPE_P9100COLOR 24 - -#define FBTYPE_PCI_GENERIC 1000 -#define FBTYPE_PCI_MACH64 1001 - -/* fbio ioctls */ -/* Returned by FBIOGTYPE */ -struct fbtype { - int fb_type; /* fb type, see above */ - int fb_height; /* pixels */ - int fb_width; /* pixels */ - int fb_depth; - int fb_cmsize; /* color map entries */ - int fb_size; /* fb size in bytes */ -}; -#define FBIOGTYPE _IOR('F', 0, struct fbtype) - -struct fbcmap { - int index; /* first element (0 origin) */ - int count; - unsigned char __user *red; - unsigned char __user *green; - unsigned char __user *blue; -}; - -#ifdef __KERNEL__ -#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) -#else -#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) -#endif - -/* # of device specific values */ -#define FB_ATTR_NDEVSPECIFIC 8 -/* # of possible emulations */ -#define FB_ATTR_NEMUTYPES 4 - -struct fbsattr { - int flags; - int emu_type; /* -1 if none */ - int dev_specific[FB_ATTR_NDEVSPECIFIC]; -}; - -struct fbgattr { - int real_type; /* real frame buffer type */ - int owner; /* unknown */ - struct fbtype fbtype; /* real frame buffer fbtype */ - struct fbsattr sattr; - int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ -}; -#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ -#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ - -#define FBIOSVIDEO _IOW('F', 7, int) -#define FBIOGVIDEO _IOR('F', 8, int) - -struct fbcursor { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - char __user *image; /* cursor image bits */ - char __user *mask; /* cursor mask bits */ -}; - -/* set/get cursor attributes/shape */ -#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) -#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) - -/* set/get cursor position */ -#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) -#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) - -/* get max cursor size */ -#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) - -/* wid manipulation */ -struct fb_wid_alloc { -#define FB_WID_SHARED_8 0 -#define FB_WID_SHARED_24 1 -#define FB_WID_DBL_8 2 -#define FB_WID_DBL_24 3 - __u32 wa_type; - __s32 wa_index; /* Set on return */ - __u32 wa_count; -}; -struct fb_wid_item { - __u32 wi_type; - __s32 wi_index; - __u32 wi_attrs; - __u32 wi_values[32]; -}; -struct fb_wid_list { - __u32 wl_flags; - __u32 wl_count; - struct fb_wid_item *wl_list; -}; - -#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) -#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) -#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) -#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) - -/* Creator ioctls */ -#define FFB_IOCTL ('F'<<8) -#define FFB_SYS_INFO (FFB_IOCTL|80) -#define FFB_CLUTREAD (FFB_IOCTL|81) -#define FFB_CLUTPOST (FFB_IOCTL|82) -#define FFB_SETDIAGMODE (FFB_IOCTL|83) -#define FFB_GETMONITORID (FFB_IOCTL|84) -#define FFB_GETVIDEOMODE (FFB_IOCTL|85) -#define FFB_SETVIDEOMODE (FFB_IOCTL|86) -#define FFB_SETSERVER (FFB_IOCTL|87) -#define FFB_SETOVCTL (FFB_IOCTL|88) -#define FFB_GETOVCTL (FFB_IOCTL|89) -#define FFB_GETSAXNUM (FFB_IOCTL|90) -#define FFB_FBDEBUG (FFB_IOCTL|91) - -/* Cg14 ioctls */ -#define MDI_IOCTL ('M'<<8) -#define MDI_RESET (MDI_IOCTL|1) -#define MDI_GET_CFGINFO (MDI_IOCTL|2) -#define MDI_SET_PIXELMODE (MDI_IOCTL|3) -# define MDI_32_PIX 32 -# define MDI_16_PIX 16 -# define MDI_8_PIX 8 - -struct mdi_cfginfo { - int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ - int mdi_type; /* FBTYPE name */ - int mdi_height; /* height */ - int mdi_width; /* widht */ - int mdi_size; /* available ram */ - int mdi_mode; /* 8bpp, 16bpp or 32bpp */ - int mdi_pixfreq; /* pixel clock (from PROM) */ -}; - -/* SparcLinux specific ioctl for the MDI, should be replaced for - * the SET_XLUT/SET_CLUTn ioctls instead - */ -#define MDI_CLEAR_XLUT (MDI_IOCTL|9) - -/* leo & ffb ioctls */ -struct fb_clut_alloc { - __u32 clutid; /* Set on return */ - __u32 flag; - __u32 index; -}; - -struct fb_clut { -#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - char * red; - char * green; - char * blue; -}; - -struct fb_clut32 { - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - __u32 red; - __u32 green; - __u32 blue; -}; - -#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) -#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) -#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) -#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) -#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ -#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ - -#ifdef __KERNEL__ -/* Addresses on the fd of a cgsix that are mappable */ -#define CG6_FBC 0x70000000 -#define CG6_TEC 0x70001000 -#define CG6_BTREGS 0x70002000 -#define CG6_FHC 0x70004000 -#define CG6_THC 0x70005000 -#define CG6_ROM 0x70006000 -#define CG6_RAM 0x70016000 -#define CG6_DHC 0x80000000 - -#define CG3_MMAP_OFFSET 0x4000000 - -/* Addresses on the fd of a tcx that are mappable */ -#define TCX_RAM8BIT 0x00000000 -#define TCX_RAM24BIT 0x01000000 -#define TCX_UNK3 0x10000000 -#define TCX_UNK4 0x20000000 -#define TCX_CONTROLPLANE 0x28000000 -#define TCX_UNK6 0x30000000 -#define TCX_UNK7 0x38000000 -#define TCX_TEC 0x70000000 -#define TCX_BTREGS 0x70002000 -#define TCX_THC 0x70004000 -#define TCX_DHC 0x70008000 -#define TCX_ALT 0x7000a000 -#define TCX_SYNC 0x7000e000 -#define TCX_UNK2 0x70010000 - -/* CG14 definitions */ - -/* Offsets into the OBIO space: */ -#define CG14_REGS 0 /* registers */ -#define CG14_CURSORREGS 0x1000 /* cursor registers */ -#define CG14_DACREGS 0x2000 /* DAC registers */ -#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ -#define CG14_CLUT1 0x4000 /* Color Look Up Table */ -#define CG14_CLUT2 0x5000 /* Color Look Up Table */ -#define CG14_CLUT3 0x6000 /* Color Look Up Table */ -#define CG14_AUTO 0xf000 - -#endif /* KERNEL */ - -/* These are exported to userland for applications to use */ -/* Mappable offsets for the cg14: control registers */ -#define MDI_DIRECT_MAP 0x10000000 -#define MDI_CTLREG_MAP 0x20000000 -#define MDI_CURSOR_MAP 0x30000000 -#define MDI_SHDW_VRT_MAP 0x40000000 - -/* Mappable offsets for the cg14: frame buffer resolutions */ -/* 32 bits */ -#define MDI_CHUNKY_XBGR_MAP 0x50000000 -#define MDI_CHUNKY_BGR_MAP 0x60000000 - -/* 16 bits */ -#define MDI_PLANAR_X16_MAP 0x70000000 -#define MDI_PLANAR_C16_MAP 0x80000000 - -/* 8 bit is done as CG3 MMAP offset */ -/* 32 bits, planar */ -#define MDI_PLANAR_X32_MAP 0x90000000 -#define MDI_PLANAR_B32_MAP 0xa0000000 -#define MDI_PLANAR_G32_MAP 0xb0000000 -#define MDI_PLANAR_R32_MAP 0xc0000000 - -/* Mappable offsets on leo */ -#define LEO_SS0_MAP 0x00000000 -#define LEO_LC_SS0_USR_MAP 0x00800000 -#define LEO_LD_SS0_MAP 0x00801000 -#define LEO_LX_CURSOR_MAP 0x00802000 -#define LEO_SS1_MAP 0x00803000 -#define LEO_LC_SS1_USR_MAP 0x01003000 -#define LEO_LD_SS1_MAP 0x01004000 -#define LEO_UNK_MAP 0x01005000 -#define LEO_LX_KRN_MAP 0x01006000 -#define LEO_LC_SS0_KRN_MAP 0x01007000 -#define LEO_LC_SS1_KRN_MAP 0x01008000 -#define LEO_LD_GBL_MAP 0x01009000 -#define LEO_UNK2_MAP 0x0100a000 - -#ifdef __KERNEL__ -struct fbcmap32 { - int index; /* first element (0 origin) */ - int count; - u32 red; - u32 green; - u32 blue; -}; - -#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) -#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) - -struct fbcursor32 { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap32 cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - u32 image; /* cursor image bits */ - u32 mask; /* cursor mask bits */ -}; - -#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) -#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) -#endif - -#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-m68k/fcntl.h b/include/asm-m68k/fcntl.h deleted file mode 100644 index 1c369b20dc4..00000000000 --- a/include/asm-m68k/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _M68K_FCNTL_H -#define _M68K_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include - -#endif /* _M68K_FCNTL_H */ diff --git a/include/asm-m68k/floppy.h b/include/asm-m68k/floppy.h deleted file mode 100644 index 697d50393dd..00000000000 --- a/include/asm-m68k/floppy.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Implementation independent bits of the Floppy driver. - * - * much of this file is derived from what was originally the Q40 floppy driver. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999, 2000, 2001 - * - * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net) - * - */ - -#include - -#include - -asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id); - -/* constants... */ - -#undef MAX_DMA_ADDRESS -#define MAX_DMA_ADDRESS 0x00 /* nothing like that */ - - -/* - * Again, the CMOS information doesn't work on m68k.. - */ -#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4) -#define FLOPPY1_TYPE 0 - -/* basically PC init + set use_virtual_dma */ -#define FDC1 m68k_floppy_init() - -#define N_FDC 1 -#define N_DRIVE 8 - - -/* vdma globals adapted from asm-i386/floppy.h */ - -static int virtual_dma_count=0; -static int virtual_dma_residue=0; -static char *virtual_dma_addr=NULL; -static int virtual_dma_mode=0; -static int doing_pdma=0; - -#include - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - - -static __inline__ unsigned char fd_inb(int port) -{ - if(MACH_IS_Q40) - return inb_p(port); - else if(MACH_IS_SUN3X) - return sun3x_82072_fd_inb(port); - return 0; -} - -static __inline__ void fd_outb(unsigned char value, int port) -{ - if(MACH_IS_Q40) - outb_p(value, port); - else if(MACH_IS_SUN3X) - sun3x_82072_fd_outb(value, port); -} - - -static int fd_request_irq(void) -{ - if(MACH_IS_Q40) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", floppy_hardint); - else if(MACH_IS_SUN3X) - return sun3xflop_request_irq(); - return -ENXIO; -} - -static void fd_free_irq(void) -{ - if(MACH_IS_Q40) - free_irq(FLOPPY_IRQ, floppy_hardint); -} - -#define fd_request_dma() vdma_request_dma(FLOPPY_DMA,"floppy") -#define fd_get_dma_residue() vdma_get_dma_residue(FLOPPY_DMA) -#define fd_dma_mem_alloc(size) vdma_mem_alloc(size) -#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io) - -#define fd_enable_irq() /* nothing... */ -#define fd_disable_irq() /* nothing... */ - -#define fd_free_dma() /* nothing */ - -/* No 64k boundary crossing problems on Q40 - no DMA at all */ -#define CROSS_64KB(a,s) (0) - -#define DMA_MODE_READ 0x44 /* i386 look-alike */ -#define DMA_MODE_WRITE 0x48 - - -static int m68k_floppy_init(void) -{ - use_virtual_dma =1; - can_use_virtual_dma = 1; - - - if (MACH_IS_Q40) - return 0x3f0; - else if(MACH_IS_SUN3X) - return sun3xflop_init(); - else - return -1; -} - - -static int vdma_request_dma(unsigned int dmanr, const char * device_id) -{ - return 0; -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static unsigned long vdma_mem_alloc(unsigned long size) -{ - return (unsigned long) vmalloc(size); - -} - -static void _fd_dma_mem_free(unsigned long addr, unsigned long size) -{ - vfree((void *)addr); -} -#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size) - - -/* choose_dma_mode ???*/ - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_pdma = 1; - virtual_dma_port = (MACH_IS_Q40 ? io : 0); - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - - - -static void fd_disable_dma(void) -{ - doing_pdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - - - -/* this is the only truly Q40 specific function */ - -asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id) -{ - register unsigned char st; - -#undef TRACE_FLPY_INT -#define NO_FLOPPY_ASSEMBLER - -#ifdef TRACE_FLPY_INT - static int calls=0; - static int bytes=0; - static int dma_wait=0; -#endif - if(!doing_pdma) { - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - -#ifdef TRACE_FLPY_INT - if(!calls) - bytes = virtual_dma_count; -#endif - - { - register int lcount; - register char *lptr; - - /* serve 1st byte fast: */ - - st=1; - for(lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if(st != 0xa0) - break; - if(virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - } - -#ifdef TRACE_FLPY_INT - calls++; -#endif - if(st == 0x20) - return IRQ_HANDLED; - if(!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -#ifdef TRACE_FLPY_INT - printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", - virtual_dma_count, virtual_dma_residue, calls, bytes, - dma_wait); - calls = 0; - dma_wait=0; -#endif - doing_pdma = 0; - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } -#ifdef TRACE_FLPY_INT - if(!virtual_dma_count) - dma_wait++; -#endif - return IRQ_HANDLED; -} - -#define EXTRA_FLOPPY_PARAMS diff --git a/include/asm-m68k/fpu.h b/include/asm-m68k/fpu.h deleted file mode 100644 index ffb6b8cfc6d..00000000000 --- a/include/asm-m68k/fpu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __M68K_FPU_H -#define __M68K_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ - -#if defined(CONFIG_M68020) || defined(CONFIG_M68030) -#define FPSTATESIZE (216) -#elif defined(CONFIG_M68040) -#define FPSTATESIZE (96) -#elif defined(CONFIG_M68KFPU_EMU) -#define FPSTATESIZE (28) -#elif defined(CONFIG_M68060) -#define FPSTATESIZE (12) -#else -#define FPSTATESIZE (0) -#endif - -#endif /* __M68K_FPU_H */ diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/include/asm-m68k/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-m68k/hardirq.h b/include/asm-m68k/hardirq.h deleted file mode 100644 index 394ee946015..00000000000 --- a/include/asm-m68k/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -#endif diff --git a/include/asm-m68k/hp300hw.h b/include/asm-m68k/hp300hw.h deleted file mode 100644 index d998ea67c19..00000000000 --- a/include/asm-m68k/hp300hw.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_HP300HW_H -#define _M68K_HP300HW_H - -extern unsigned long hp300_model; - -/* This information was taken from NetBSD */ -#define HP_320 (0) /* 16MHz 68020+HP MMU+16K external cache */ -#define HP_330 (1) /* 16MHz 68020+68851 MMU */ -#define HP_340 (2) /* 16MHz 68030 */ -#define HP_345 (3) /* 50MHz 68030+32K external cache */ -#define HP_350 (4) /* 25MHz 68020+HP MMU+32K external cache */ -#define HP_360 (5) /* 25MHz 68030 */ -#define HP_370 (6) /* 33MHz 68030+64K external cache */ -#define HP_375 (7) /* 50MHz 68030+32K external cache */ -#define HP_380 (8) /* 25MHz 68040 */ -#define HP_385 (9) /* 33MHz 68040 */ - -#define HP_400 (10) /* 50MHz 68030+32K external cache */ -#define HP_425T (11) /* 25MHz 68040 - model 425t */ -#define HP_425S (12) /* 25MHz 68040 - model 425s */ -#define HP_425E (13) /* 25MHz 68040 - model 425e */ -#define HP_433T (14) /* 33MHz 68040 - model 433t */ -#define HP_433S (15) /* 33MHz 68040 - model 433s */ - -#endif /* _M68K_HP300HW_H */ diff --git a/include/asm-m68k/hw_irq.h b/include/asm-m68k/hw_irq.h deleted file mode 100644 index eacef0951fb..00000000000 --- a/include/asm-m68k/hw_irq.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_HW_IRQ_H -#define __ASM_M68K_HW_IRQ_H - -/* Dummy include. */ - -#endif diff --git a/include/asm-m68k/hwtest.h b/include/asm-m68k/hwtest.h deleted file mode 100644 index 402c8a4401f..00000000000 --- a/include/asm-m68k/hwtest.h +++ /dev/null @@ -1,15 +0,0 @@ -/* Routines to test for presence/absence of hardware registers: - * see arch/m68k/mm/hwtest.c. - * -- PMM 05/1998 - * - * Removed __init from decls. We might want them in modules, and - * the code is tiny anyway. 16/5/98 pb - */ - -#ifndef __ASM_HWTEST_H -#define __ASM_HWTEST_H - -extern int hwreg_present(volatile void *regp); -extern int hwreg_write(volatile void *regp, unsigned short val); - -#endif diff --git a/include/asm-m68k/ide.h b/include/asm-m68k/ide.h deleted file mode 100644 index b996a3c8cff..00000000000 --- a/include/asm-m68k/ide.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * linux/include/asm-m68k/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - */ - -/* Copyright(c) 1996 Kars de Jong */ -/* Based on the ide driver from 1.2.13pl8 */ - -/* - * Credits (alphabetical): - * - * - Bjoern Brauel - * - Kars de Jong - * - Torsten Ebeling - * - Dwight Engen - * - Thorsten Floeck - * - Roman Hodek - * - Guenther Kelleter - * - Chris Lawrence - * - Michael Rausch - * - Christian Sauer - * - Michael Schmitz - * - Jes Soerensen - * - Michael Thurm - * - Geert Uytterhoeven - */ - -#ifndef _M68K_IDE_H -#define _M68K_IDE_H - -#ifdef __KERNEL__ - - -#include -#include -#include - -#ifdef CONFIG_ATARI -#include -#include -#endif - -#ifdef CONFIG_MAC -#include -#endif - -/* - * Get rid of defs from io.h - ide has its private and conflicting versions - * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we - * always use the `raw' MMIO versions - */ -#undef inb -#undef inw -#undef insw -#undef inl -#undef insl -#undef outb -#undef outw -#undef outsw -#undef outl -#undef outsl -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel - -#define inb in_8 -#define inw in_be16 -#define insw(port, addr, n) raw_insw((u16 *)port, addr, n) -#define inl in_be32 -#define insl(port, addr, n) raw_insl((u32 *)port, addr, n) -#define outb(val, port) out_8(port, val) -#define outw(val, port) out_be16(port, val) -#define outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) -#define outl(val, port) out_be32(port, val) -#define outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) -#define readb in_8 -#define readw in_be16 -#define __ide_mm_insw(port, addr, n) raw_insw((u16 *)port, addr, n) -#define readl in_be32 -#define __ide_mm_insl(port, addr, n) raw_insl((u32 *)port, addr, n) -#define writeb(val, port) out_8(port, val) -#define writew(val, port) out_be16(port, val) -#define __ide_mm_outsw(port, addr, n) raw_outsw((u16 *)port, addr, n) -#define writel(val, port) out_be32(port, val) -#define __ide_mm_outsl(port, addr, n) raw_outsl((u32 *)port, addr, n) -#if defined(CONFIG_ATARI) || defined(CONFIG_Q40) -#define insw_swapw(port, addr, n) raw_insw_swapw((u16 *)port, addr, n) -#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n) -#endif - -#ifdef CONFIG_BLK_DEV_FALCON_IDE -#define IDE_ARCH_LOCK - -extern int falconide_intr_lock; - -static __inline__ void ide_release_lock (void) -{ - if (MACH_IS_ATARI) { - if (falconide_intr_lock == 0) { - printk("ide_release_lock: bug\n"); - return; - } - falconide_intr_lock = 0; - stdma_release(); - } -} - -static __inline__ void -ide_get_lock(irq_handler_t handler, void *data) -{ - if (MACH_IS_ATARI) { - if (falconide_intr_lock == 0) { - if (in_interrupt() > 0) - panic( "Falcon IDE hasn't ST-DMA lock in interrupt" ); - stdma_lock(handler, data); - falconide_intr_lock = 1; - } - } -} -#endif /* CONFIG_BLK_DEV_FALCON_IDE */ - -#define IDE_ARCH_ACK_INTR -#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) - -#endif /* __KERNEL__ */ -#endif /* _M68K_IDE_H */ diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h deleted file mode 100644 index 160616a89e0..00000000000 --- a/include/asm-m68k/idprom.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _M68K_IDPROM_H -#define _M68K_IDPROM_H -/* - * idprom.h: Macros and defines for idprom routines - * - * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include - -struct idprom { - u8 id_format; /* Format identifier (always 0x01) */ - u8 id_machtype; /* Machine type */ - u8 id_ethaddr[6]; /* Hardware ethernet address */ - s32 id_date; /* Date of manufacture */ - u32 id_sernum:24; /* Unique serial number */ - u8 id_cksum; /* Checksum - xor of the data bytes */ - u8 reserved[16]; -}; - -extern struct idprom *idprom; -extern void idprom_init(void); - -/* Sun3: in control space */ -#define SUN3_IDPROM_BASE 0x00000000 - -#endif /* !(_M68K_IDPROM_H) */ diff --git a/include/asm-m68k/intersil.h b/include/asm-m68k/intersil.h deleted file mode 100644 index f482902cac8..00000000000 --- a/include/asm-m68k/intersil.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _SUN3_INTERSIL_H -#define _SUN3_INTERSIL_H -/* bits 0 and 1 */ -#define INTERSIL_FREQ_32K 0x00 -#define INTERSIL_FREQ_1M 0x01 -#define INTERSIL_FREQ_2M 0x02 -#define INTERSIL_FREQ_4M 0x03 - -/* bit 2 */ -#define INTERSIL_12H_MODE 0x00 -#define INTERSIL_24H_MODE 0x04 - -/* bit 3 */ -#define INTERSIL_STOP 0x00 -#define INTERSIL_RUN 0x08 - -/* bit 4 */ -#define INTERSIL_INT_ENABLE 0x10 -#define INTERSIL_INT_DISABLE 0x00 - -/* bit 5 */ -#define INTERSIL_MODE_NORMAL 0x00 -#define INTERSIL_MODE_TEST 0x20 - -#define INTERSIL_HZ_100_MASK 0x02 - -struct intersil_dt { - unsigned char csec; - unsigned char hour; - unsigned char minute; - unsigned char second; - unsigned char month; - unsigned char day; - unsigned char year; - unsigned char weekday; -}; - -struct intersil_7170 { - struct intersil_dt counter; - struct intersil_dt alarm; - unsigned char int_reg; - unsigned char cmd_reg; -}; - -extern volatile char* clock_va; -#define intersil_clock ((volatile struct intersil_7170 *) clock_va) -#define intersil_clear() (void)intersil_clock->int_reg -#endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h deleted file mode 100644 index 9e673e3bd43..00000000000 --- a/include/asm-m68k/io.h +++ /dev/null @@ -1,369 +0,0 @@ -/* - * linux/include/asm-m68k/io.h - * - * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other - * IO access - * - added Q40 support - * - added skeleton for GG-II and Amiga PCMCIA - * 2/3/01 RZ: - moved a few more defs into raw_io.h - * - * inX/outX should not be used by any driver unless it does - * ISA access. Other drivers should use function defined in raw_io.h - * or define its own macros on top of these. - * - * inX(),outX() are for ISA I/O - * isa_readX(),isa_writeX() are for ISA memory - */ - -#ifndef _IO_H -#define _IO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -#include - -#ifdef CONFIG_ATARI -#include -#endif - - -/* - * IO/MEM definitions for various ISA bridges - */ - - -#ifdef CONFIG_Q40 - -#define q40_isa_io_base 0xff400000 -#define q40_isa_mem_base 0xff800000 - -#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr))) -#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+ 4*((unsigned long)(ioaddr))) -#define Q40_ISA_MEM_B(madr) (q40_isa_mem_base+1+4*((unsigned long)(madr))) -#define Q40_ISA_MEM_W(madr) (q40_isa_mem_base+ 4*((unsigned long)(madr))) - -#define MULTI_ISA 0 -#endif /* Q40 */ - -/* GG-II Zorro to ISA bridge */ -#ifdef CONFIG_GG2 - -extern unsigned long gg2_isa_base; -#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4)) -#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+ ((unsigned long)(ioaddr)*4)) -#define GG2_ISA_MEM_B(madr) (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff)) -#define GG2_ISA_MEM_W(madr) (gg2_isa_base+ (((unsigned long)(madr)*4) & 0xfffff)) - -#ifndef MULTI_ISA -#define MULTI_ISA 0 -#else -#undef MULTI_ISA -#define MULTI_ISA 1 -#endif -#endif /* GG2 */ - -#ifdef CONFIG_AMIGA_PCMCIA -#include - -#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) ) -#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) ) - -#ifndef MULTI_ISA -#define MULTI_ISA 0 -#else -#undef MULTI_ISA -#define MULTI_ISA 1 -#endif -#endif /* AMIGA_PCMCIA */ - - - -#ifdef CONFIG_ISA - -#if MULTI_ISA == 0 -#undef MULTI_ISA -#endif - -#define ISA_TYPE_Q40 (1) -#define ISA_TYPE_GG2 (2) -#define ISA_TYPE_AG (3) - -#if defined(CONFIG_Q40) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_Q40 -#define ISA_SEX 0 -#endif -#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_AG -#define ISA_SEX 1 -#endif -#if defined(CONFIG_GG2) && !defined(MULTI_ISA) -#define ISA_TYPE ISA_TYPE_GG2 -#define ISA_SEX 0 -#endif - -#ifdef MULTI_ISA -extern int isa_type; -extern int isa_sex; - -#define ISA_TYPE isa_type -#define ISA_SEX isa_sex -#endif - -/* - * define inline addr translation functions. Normally only one variant will - * be compiled in so the case statement will be optimised away - */ - -static inline u8 __iomem *isa_itb(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr); -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u16 __iomem *isa_itw(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr); -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u32 __iomem *isa_itl(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr); -#endif - default: return 0; /* avoid warnings, just in case */ - } -} -static inline u8 __iomem *isa_mtb(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u8 __iomem *)addr; -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} -static inline u16 __iomem *isa_mtw(unsigned long addr) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr); -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr); -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: return (u16 __iomem *)addr; -#endif - default: return NULL; /* avoid warnings, just in case */ - } -} - - -#define isa_inb(port) in_8(isa_itb(port)) -#define isa_inw(port) (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port))) -#define isa_inl(port) (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port))) -#define isa_outb(val,port) out_8(isa_itb(port),(val)) -#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val))) -#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val))) - -#define isa_readb(p) in_8(isa_mtb((unsigned long)(p))) -#define isa_readw(p) \ - (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \ - : in_le16(isa_mtw((unsigned long)(p)))) -#define isa_writeb(val,p) out_8(isa_mtb((unsigned long)(p)),(val)) -#define isa_writew(val,p) \ - (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ - : out_le16(isa_mtw((unsigned long)(p)),(val))) - -static inline void isa_delay(void) -{ - switch(ISA_TYPE) - { -#ifdef CONFIG_Q40 - case ISA_TYPE_Q40: isa_outb(0,0x80); break; -#endif -#ifdef CONFIG_GG2 - case ISA_TYPE_GG2: break; -#endif -#ifdef CONFIG_AMIGA_PCMCIA - case ISA_TYPE_AG: break; -#endif - default: break; /* avoid warnings */ - } -} - -#define isa_inb_p(p) ({u8 v=isa_inb(p);isa_delay();v;}) -#define isa_outb_p(v,p) ({isa_outb((v),(p));isa_delay();}) -#define isa_inw_p(p) ({u16 v=isa_inw(p);isa_delay();v;}) -#define isa_outw_p(v,p) ({isa_outw((v),(p));isa_delay();}) -#define isa_inl_p(p) ({u32 v=isa_inl(p);isa_delay();v;}) -#define isa_outl_p(v,p) ({isa_outl((v),(p));isa_delay();}) - -#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr)) -#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr)) - -#define isa_insw(port, buf, nr) \ - (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) : \ - raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr))) - -#define isa_outsw(port, buf, nr) \ - (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \ - raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr))) - -#define isa_insl(port, buf, nr) \ - (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) : \ - raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) - -#define isa_outsl(port, buf, nr) \ - (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) : \ - raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) - - -#define inb isa_inb -#define inb_p isa_inb_p -#define outb isa_outb -#define outb_p isa_outb_p -#define inw isa_inw -#define inw_p isa_inw_p -#define outw isa_outw -#define outw_p isa_outw_p -#define inl isa_inl -#define inl_p isa_inl_p -#define outl isa_outl -#define outl_p isa_outl_p -#define insb isa_insb -#define insw isa_insw -#define insl isa_insl -#define outsb isa_outsb -#define outsw isa_outsw -#define outsl isa_outsl -#define readb isa_readb -#define readw isa_readw -#define writeb isa_writeb -#define writew isa_writew - -#else /* CONFIG_ISA */ - -/* - * We need to define dummy functions for GENERIC_IOMAP support. - */ -#define inb(port) 0xff -#define inb_p(port) 0xff -#define outb(val,port) ((void)0) -#define outb_p(val,port) ((void)0) -#define inw(port) 0xffff -#define outw(val,port) ((void)0) -#define inl(port) 0xffffffffUL -#define outl(val,port) ((void)0) - -#define insb(port,buf,nr) ((void)0) -#define outsb(port,buf,nr) ((void)0) -#define insw(port,buf,nr) ((void)0) -#define outsw(port,buf,nr) ((void)0) -#define insl(port,buf,nr) ((void)0) -#define outsl(port,buf,nr) ((void)0) - -/* - * These should be valid on any ioremap()ed region - */ -#define readb(addr) in_8(addr) -#define writeb(val,addr) out_8((addr),(val)) -#define readw(addr) in_le16(addr) -#define writew(val,addr) out_le16((addr),(val)) - -#endif /* CONFIG_ISA */ - -#define readl(addr) in_le32(addr) -#define writel(val,addr) out_le32((addr),(val)) - -#define mmiowb() - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void __iomem *ioremap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void __iomem *ioremap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - __builtin_memset((void __force *) addr, val, count); -} -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __builtin_memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __builtin_memcpy((void __force *) dst, src, count); -} - -#ifndef CONFIG_SUN3 -#define IO_SPACE_LIMIT 0xffff -#else -#define IO_SPACE_LIMIT 0x0fffffff -#endif - -#endif /* __KERNEL__ */ - -#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* _IO_H */ diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-m68k/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/ioctls.h b/include/asm-m68k/ioctls.h deleted file mode 100644 index b8d2f4be7fd..00000000000 --- a/include/asm-m68k/ioctls.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __ARCH_M68K_IOCTLS_H__ -#define __ARCH_M68K_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __ARCH_M68K_IOCTLS_H__ */ diff --git a/include/asm-m68k/ipcbuf.h b/include/asm-m68k/ipcbuf.h deleted file mode 100644 index a623ea3f095..00000000000 --- a/include/asm-m68k/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __m68k_IPCBUF_H__ -#define __m68k_IPCBUF_H__ - -/* - * The user_ipc_perm structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __m68k_IPCBUF_H__ */ diff --git a/include/asm-m68k/irq.h b/include/asm-m68k/irq.h deleted file mode 100644 index 226bfc0f21b..00000000000 --- a/include/asm-m68k/irq.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef _M68K_IRQ_H_ -#define _M68K_IRQ_H_ - -#include -#include -#include - -/* - * This should be the same as the max(NUM_X_SOURCES) for all the - * different m68k hosts compiled into the kernel. - * Currently the Atari has 72 and the Amiga 24, but if both are - * supported in the kernel it is better to make room for 72. - */ -#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -#define NR_IRQS 200 -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) -#define NR_IRQS 72 -#elif defined(CONFIG_Q40) -#define NR_IRQS 43 -#elif defined(CONFIG_AMIGA) -#define NR_IRQS 32 -#elif defined(CONFIG_APOLLO) -#define NR_IRQS 24 -#elif defined(CONFIG_HP300) -#define NR_IRQS 8 -#else -#define NR_IRQS 0 -#endif - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -/* - * Interrupt source definitions - * General interrupt sources are the level 1-7. - * Adding an interrupt service routine for one of these sources - * results in the addition of that routine to a chain of routines. - * Each one is called in succession. Each individual interrupt - * service routine should determine if the device associated with - * that routine requires service. - */ - -#define IRQ_SPURIOUS 0 - -#define IRQ_AUTO_1 1 /* level 1 interrupt */ -#define IRQ_AUTO_2 2 /* level 2 interrupt */ -#define IRQ_AUTO_3 3 /* level 3 interrupt */ -#define IRQ_AUTO_4 4 /* level 4 interrupt */ -#define IRQ_AUTO_5 5 /* level 5 interrupt */ -#define IRQ_AUTO_6 6 /* level 6 interrupt */ -#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ - -#define IRQ_USER 8 - -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -typedef struct irq_node { - int (*handler)(int, void *); - void *dev_id; - struct irq_node *next; - unsigned long flags; - const char *devname; -} irq_node_t; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_controller { - const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); -}; - -extern int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); - -/* - * This function returns a new irq_node_t - */ -extern irq_node_t *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); - -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); - -#endif /* _M68K_IRQ_H_ */ diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-m68k/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-m68k/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/kmap_types.h b/include/asm-m68k/kmap_types.h deleted file mode 100644 index c843c63d380..00000000000 --- a/include/asm-m68k/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/include/asm-m68k/linkage.h b/include/asm-m68k/linkage.h deleted file mode 100644 index 5a822bb790f..00000000000 --- a/include/asm-m68k/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 4 -#define __ALIGN_STR ".align 4" - -#endif diff --git a/include/asm-m68k/local.h b/include/asm-m68k/local.h deleted file mode 100644 index 6c259263e1f..00000000000 --- a/include/asm-m68k/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/include/asm-m68k/mac_asc.h b/include/asm-m68k/mac_asc.h deleted file mode 100644 index fc2e5467b41..00000000000 --- a/include/asm-m68k/mac_asc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Apple Sound Chip - */ - -#ifndef __ASM_MAC_ASC_H -#define __ASM_MAC_ASC_H - -/* - * ASC offsets and controls - */ - -#define ASC_BUF_BASE 0x00 /* RAM buffer offset */ -#define ASC_BUF_SIZE 0x800 - -#define ASC_CONTROL 0x800 -#define ASC_CONTROL_OFF 0x00 -#define ASC_FREQ(chan,byte) ((0x810)+((chan)<<3)+(byte)) -#define ASC_ENABLE 0x801 -#define ASC_ENABLE_SAMPLE 0x02 -#define ASC_MODE 0x802 -#define ASC_MODE_SAMPLE 0x02 - -#define ASC_VOLUME 0x806 -#define ASC_CHAN 0x807 /* ??? */ - - -#endif diff --git a/include/asm-m68k/mac_baboon.h b/include/asm-m68k/mac_baboon.h deleted file mode 100644 index c2a042b8c34..00000000000 --- a/include/asm-m68k/mac_baboon.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Definitions for the "Baboon" custom IC on the PowerBook 190. - */ - -#define BABOON_BASE (0x50F1A000) /* same as IDE controller base */ - -#ifndef __ASSEMBLY__ - -struct baboon { - char pad1[208]; /* generic IDE registers, not used here */ - short mb_control; /* Control register: - * bit 5 : slot 2 power control - * bit 6 : slot 1 power control - */ - char pad2[2]; - short mb_status; /* (0xD4) media bay status register: - * - * bit 0: ???? - * bit 1: IDE interrupt active? - * bit 2: bay status, 0 = full, 1 = empty - * bit 3: ???? - */ - char pad3[2]; /* (0xD6) not used */ - short mb_ifr; /* (0xD8) media bay interrupt flags register: - * - * bit 0: ???? - * bit 1: IDE controller interrupt - * bit 2: media bay status change interrupt - */ -}; - -#endif /* __ASSEMBLY **/ diff --git a/include/asm-m68k/mac_iop.h b/include/asm-m68k/mac_iop.h deleted file mode 100644 index a2c7e6fcca3..00000000000 --- a/include/asm-m68k/mac_iop.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * I/O Processor (IOP) defines and structures, mostly snagged from A/UX - * header files. - * - * The original header from which this was taken is copyrighted. I've done some - * rewriting (in fact my changes make this a bit more readable, IMHO) but some - * more should be done. - */ - -/* - * This is the base address of the IOPs. Use this as the address of - * a "struct iop" (see below) to see where the actual registers fall. - */ - -#define SCC_IOP_BASE_IIFX (0x50F04000) -#define ISM_IOP_BASE_IIFX (0x50F12000) - -#define SCC_IOP_BASE_QUADRA (0x50F0C000) -#define ISM_IOP_BASE_QUADRA (0x50F1E000) - -/* IOP status/control register bits: */ - -#define IOP_BYPASS 0x01 /* bypass-mode hardware access */ -#define IOP_AUTOINC 0x02 /* allow autoincrement of ramhi/lo */ -#define IOP_RUN 0x04 /* set to 0 to reset IOP chip */ -#define IOP_IRQ 0x08 /* generate IRQ to IOP if 1 */ -#define IOP_INT0 0x10 /* intr priority from IOP to host */ -#define IOP_INT1 0x20 /* intr priority from IOP to host */ -#define IOP_HWINT 0x40 /* IRQ from hardware; bypass mode only */ -#define IOP_DMAINACTIVE 0x80 /* no DMA request active; bypass mode only */ - -#define NUM_IOPS 2 -#define NUM_IOP_CHAN 7 -#define NUM_IOP_MSGS NUM_IOP_CHAN*8 -#define IOP_MSG_LEN 32 - -/* IOP reference numbers, used by the globally-visible iop_xxx functions */ - -#define IOP_NUM_SCC 0 -#define IOP_NUM_ISM 1 - -/* IOP channel states */ - -#define IOP_MSG_IDLE 0 /* idle */ -#define IOP_MSG_NEW 1 /* new message sent */ -#define IOP_MSG_RCVD 2 /* message received; processing */ -#define IOP_MSG_COMPLETE 3 /* message processing complete */ - -/* IOP message status codes */ - -#define IOP_MSGSTATUS_UNUSED 0 /* Unusued message structure */ -#define IOP_MSGSTATUS_WAITING 1 /* waiting for channel */ -#define IOP_MSGSTATUS_SENT 2 /* message sent, awaiting reply */ -#define IOP_MSGSTATUS_COMPLETE 3 /* message complete and reply rcvd */ -#define IOP_MSGSTATUS_UNSOL 6 /* message is unsolicited */ - -/* IOP memory addresses of the members of the mac_iop_kernel structure. */ - -#define IOP_ADDR_MAX_SEND_CHAN 0x0200 -#define IOP_ADDR_SEND_STATE 0x0201 -#define IOP_ADDR_PATCH_CTRL 0x021F -#define IOP_ADDR_SEND_MSG 0x0220 -#define IOP_ADDR_MAX_RECV_CHAN 0x0300 -#define IOP_ADDR_RECV_STATE 0x0301 -#define IOP_ADDR_ALIVE 0x031F -#define IOP_ADDR_RECV_MSG 0x0320 - -#ifndef __ASSEMBLY__ - -/* - * IOP Control registers, staggered because in usual Apple style they were - * too lazy to decode the A0 bit. This structure is assumed to begin at - * one of the xxx_IOP_BASE addresses given above. - */ - -struct mac_iop { - __u8 ram_addr_hi; /* shared RAM address hi byte */ - __u8 pad0; - __u8 ram_addr_lo; /* shared RAM address lo byte */ - __u8 pad1; - __u8 status_ctrl; /* status/control register */ - __u8 pad2[3]; - __u8 ram_data; /* RAM data byte at ramhi/lo */ - - __u8 pad3[23]; - - /* Bypass-mode hardware access registers */ - - union { - struct { /* SCC registers */ - __u8 sccb_cmd; /* SCC B command reg */ - __u8 pad4; - __u8 scca_cmd; /* SCC A command reg */ - __u8 pad5; - __u8 sccb_data; /* SCC B data */ - __u8 pad6; - __u8 scca_data; /* SCC A data */ - } scc_regs; - - struct { /* ISM registers */ - __u8 wdata; /* write a data byte */ - __u8 pad7; - __u8 wmark; /* write a mark byte */ - __u8 pad8; - __u8 wcrc; /* write 2-byte crc to disk */ - __u8 pad9; - __u8 wparams; /* write the param regs */ - __u8 pad10; - __u8 wphase; /* write the phase states & dirs */ - __u8 pad11; - __u8 wsetup; /* write the setup register */ - __u8 pad12; - __u8 wzeroes; /* mode reg: 1's clr bits, 0's are x */ - __u8 pad13; - __u8 wones; /* mode reg: 1's set bits, 0's are x */ - __u8 pad14; - __u8 rdata; /* read a data byte */ - __u8 pad15; - __u8 rmark; /* read a mark byte */ - __u8 pad16; - __u8 rerror; /* read the error register */ - __u8 pad17; - __u8 rparams; /* read the param regs */ - __u8 pad18; - __u8 rphase; /* read the phase states & dirs */ - __u8 pad19; - __u8 rsetup; /* read the setup register */ - __u8 pad20; - __u8 rmode; /* read the mode register */ - __u8 pad21; - __u8 rhandshake; /* read the handshake register */ - } ism_regs; - } b; -}; - -/* This structure is used to track IOP messages in the Linux kernel */ - -struct iop_msg { - struct iop_msg *next; /* next message in queue or NULL */ - uint iop_num; /* IOP number */ - uint channel; /* channel number */ - void *caller_priv; /* caller private data */ - int status; /* status of this message */ - __u8 message[IOP_MSG_LEN]; /* the message being sent/received */ - __u8 reply[IOP_MSG_LEN]; /* the reply to the message */ - void (*handler)(struct iop_msg *); - /* function to call when reply recvd */ -}; - -extern int iop_scc_present,iop_ism_present; - -extern int iop_listen(uint, uint, - void (*handler)(struct iop_msg *), - const char *); -extern int iop_send_message(uint, uint, void *, uint, __u8 *, - void (*)(struct iop_msg *)); -extern void iop_complete_message(struct iop_msg *); -extern void iop_upload_code(uint, __u8 *, uint, __u16); -extern void iop_download_code(uint, __u8 *, uint, __u16); -extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16); - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_mouse.h b/include/asm-m68k/mac_mouse.h deleted file mode 100644 index 39a5c292eae..00000000000 --- a/include/asm-m68k/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/include/asm-m68k/mac_oss.h b/include/asm-m68k/mac_oss.h deleted file mode 100644 index 7221f725193..00000000000 --- a/include/asm-m68k/mac_oss.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * OSS - * - * This is used in place of VIA2 on the IIfx. - */ - -#define OSS_BASE (0x50f1a000) - -/* - * Interrupt level offsets for mac_oss->irq_level - */ - -#define OSS_NUBUS0 0 -#define OSS_NUBUS1 1 -#define OSS_NUBUS2 2 -#define OSS_NUBUS3 3 -#define OSS_NUBUS4 4 -#define OSS_NUBUS5 5 -#define OSS_IOPISM 6 -#define OSS_IOPSCC 7 -#define OSS_SOUND 8 -#define OSS_SCSI 9 -#define OSS_60HZ 10 -#define OSS_VIA1 11 -#define OSS_UNUSED1 12 -#define OSS_UNUSED2 13 -#define OSS_PARITY 14 -#define OSS_UNUSED3 15 - -#define OSS_NUM_SOURCES 16 - -/* - * Pending interrupt bits in mac_oss->irq_pending - */ - -#define OSS_IP_NUBUS0 0x0001 -#define OSS_IP_NUBUS1 0x0002 -#define OSS_IP_NUBUS2 0x0004 -#define OSS_IP_NUBUS3 0x0008 -#define OSS_IP_NUBUS4 0x0010 -#define OSS_IP_NUBUS5 0x0020 -#define OSS_IP_IOPISM 0x0040 -#define OSS_IP_IOPSCC 0x0080 -#define OSS_IP_SOUND 0x0100 -#define OSS_IP_SCSI 0x0200 -#define OSS_IP_60HZ 0x0400 -#define OSS_IP_VIA1 0x0800 -#define OSS_IP_UNUSED1 0x1000 -#define OSS_IP_UNUSED2 0x2000 -#define OSS_IP_PARITY 0x4000 -#define OSS_IP_UNUSED3 0x8000 - -#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5) - -/* - * Rom Control Register - */ - -#define OSS_POWEROFF 0x80 - -/* - * OSS Interrupt levels for various sub-systems - * - * This mapping is layed out with two things in mind: first, we try to keep - * things on their own levels to avoid having to do double-dispatches. Second, - * the levels match as closely as possible the alternate IRQ mapping mode (aka - * "A/UX mode") available on some VIA machines. - */ - -#define OSS_IRQLEV_DISABLED 0 -#define OSS_IRQLEV_IOPISM 1 /* ADB? */ -#define OSS_IRQLEV_SCSI IRQ_AUTO_2 -#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */ -#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */ - -#ifndef __ASSEMBLY__ - -struct mac_oss { - __u8 irq_level[0x10]; /* [0x000-0x00f] Interrupt levels */ - __u8 padding0[0x1F2]; /* [0x010-0x201] IO space filler */ - __u16 irq_pending; /* [0x202-0x203] pending interrupts bits */ - __u8 rom_ctrl; /* [0x204-0x204] ROM cntl reg (for poweroff) */ - __u8 padding1[0x2]; /* [0x205-0x206] currently unused by A/UX */ - __u8 ack_60hz; /* [0x207-0x207] 60 Hz ack. */ -}; - -extern volatile struct mac_oss *oss; -extern int oss_present; - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_psc.h b/include/asm-m68k/mac_psc.h deleted file mode 100644 index 7808bb0b232..00000000000 --- a/include/asm-m68k/mac_psc.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Apple Peripheral System Controller (PSC) - * - * The PSC is used on the AV Macs to control IO functions not handled - * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA - * channels. - * - * The first seven DMA channels appear to be "one-shot" and are actually - * sets of two channels; one member is active while the other is being - * configured, and then you flip the active member and start all over again. - * The one-shot channels are grouped together and are: - * - * 1. SCSI - * 2. Ethernet Read - * 3. Ethernet Write - * 4. Floppy Disk Controller - * 5. SCC Channel A Receive - * 6. SCC Channel B Receive - * 7. SCC Channel A Transmit - * - * The remaining two channels are handled somewhat differently. They appear - * to be closely tied and share one set of registers. They also seem to run - * continuously, although how you keep the buffer filled in this scenario is - * not understood as there seems to be only one input and one output buffer - * pointer. - * - * Much of this was extrapolated from what was known about the Ethernet - * registers and subsequently confirmed using MacsBug (ie by pinging the - * machine with easy-to-find patterns and looking for them in the DMA - * buffers, or by sending a file over the serial ports and finding the - * file in the buffers.) - * - * 1999-05-25 (jmt) - */ - -#define PSC_BASE (0x50F31000) - -/* - * The IER/IFR registers work like the VIA, except that it has 4 - * of them each on different interrupt levels, and each register - * set only seems to handle four interrupts instead of seven. - * - * To access a particular set of registers, add 0xn0 to the base - * where n = 3,4,5 or 6. - */ - -#define pIFRbase 0x100 -#define pIERbase 0x104 - -/* - * One-shot DMA control registers - */ - -#define PSC_MYSTERY 0x804 - -#define PSC_CTL_BASE 0xC00 - -#define PSC_SCSI_CTL 0xC00 -#define PSC_ENETRD_CTL 0xC10 -#define PSC_ENETWR_CTL 0xC20 -#define PSC_FDC_CTL 0xC30 -#define PSC_SCCA_CTL 0xC40 -#define PSC_SCCB_CTL 0xC50 -#define PSC_SCCATX_CTL 0xC60 - -/* - * DMA channels. Add +0x10 for the second channel in the set. - * You're supposed to use one channel while the other runs and - * then flip channels and do the whole thing again. - */ - -#define PSC_ADDR_BASE 0x1000 -#define PSC_LEN_BASE 0x1004 -#define PSC_CMD_BASE 0x1008 - -#define PSC_SET0 0x00 -#define PSC_SET1 0x10 - -#define PSC_SCSI_ADDR 0x1000 /* confirmed */ -#define PSC_SCSI_LEN 0x1004 /* confirmed */ -#define PSC_SCSI_CMD 0x1008 /* confirmed */ -#define PSC_ENETRD_ADDR 0x1020 /* confirmed */ -#define PSC_ENETRD_LEN 0x1024 /* confirmed */ -#define PSC_ENETRD_CMD 0x1028 /* confirmed */ -#define PSC_ENETWR_ADDR 0x1040 /* confirmed */ -#define PSC_ENETWR_LEN 0x1044 /* confirmed */ -#define PSC_ENETWR_CMD 0x1048 /* confirmed */ -#define PSC_FDC_ADDR 0x1060 /* strongly suspected */ -#define PSC_FDC_LEN 0x1064 /* strongly suspected */ -#define PSC_FDC_CMD 0x1068 /* strongly suspected */ -#define PSC_SCCA_ADDR 0x1080 /* confirmed */ -#define PSC_SCCA_LEN 0x1084 /* confirmed */ -#define PSC_SCCA_CMD 0x1088 /* confirmed */ -#define PSC_SCCB_ADDR 0x10A0 /* confirmed */ -#define PSC_SCCB_LEN 0x10A4 /* confirmed */ -#define PSC_SCCB_CMD 0x10A8 /* confirmed */ -#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */ -#define PSC_SCCATX_LEN 0x10C4 /* confirmed */ -#define PSC_SCCATX_CMD 0x10C8 /* confirmed */ - -/* - * Free-running DMA registers. The only part known for sure are the bits in - * the control register, the buffer addresses and the buffer length. Everything - * else is anybody's guess. - * - * These registers seem to be mirrored every thirty-two bytes up until offset - * 0x300. It's safe to assume then that a new set of registers starts there. - */ - -#define PSC_SND_CTL 0x200 /* - * [ 16-bit ] - * Sound (Singer?) control register. - * - * bit 0 : ???? - * bit 1 : ???? - * bit 2 : Set to one to enable sound - * output. Possibly a mute flag. - * bit 3 : ???? - * bit 4 : ???? - * bit 5 : ???? - * bit 6 : Set to one to enable pass-thru - * audio. In this mode the audio data - * seems to appear in both the input - * buffer and the output buffer. - * bit 7 : Set to one to activate the - * sound input DMA or zero to - * disable it. - * bit 8 : Set to one to activate the - * sound output DMA or zero to - * disable it. - * bit 9 : \ - * bit 11 : | - * These two bits control the sample - * rate. Usually set to binary 10 and - * MacOS 8.0 says I'm at 48 KHz. Using - * a binary value of 01 makes things - * sound about 1/2 speed (24 KHz?) and - * binary 00 is slower still (22 KHz?) - * - * Setting this to 0x0000 is a good way to - * kill all DMA at boot time so that the - * PSC won't overwrite the kernel image - * with sound data. - */ - -/* - * 0x0202 - 0x0203 is unused. Writing there - * seems to clobber the control register. - */ - -#define PSC_SND_SOURCE 0x204 /* - * [ 32-bit ] - * Controls input source and volume: - * - * bits 12-15 : input source volume, 0 - F - * bits 16-19 : unknown, always 0x5 - * bits 20-23 : input source selection: - * 0x3 = CD Audio - * 0x4 = External Audio - * - * The volume is definitely not the general - * output volume as it doesn't affect the - * alert sound volume. - */ -#define PSC_SND_STATUS1 0x208 /* - * [ 32-bit ] - * Appears to be a read-only status register. - * The usual value is 0x00400002. - */ -#define PSC_SND_HUH3 0x20C /* - * [ 16-bit ] - * Unknown 16-bit value, always 0x0000. - */ -#define PSC_SND_BITS2GO 0x20E /* - * [ 16-bit ] - * Counts down to zero from some constant - * value. The value appears to be the - * number of _bits_ remaining before the - * buffer is full, which would make sense - * since Apple's docs say the sound DMA - * channels are 1 bit wide. - */ -#define PSC_SND_INADDR 0x210 /* - * [ 32-bit ] - * Address of the sound input DMA buffer - */ -#define PSC_SND_OUTADDR 0x214 /* - * [ 32-bit ] - * Address of the sound output DMA buffer - */ -#define PSC_SND_LEN 0x218 /* - * [ 16-bit ] - * Length of both buffers in eight-byte units. - */ -#define PSC_SND_HUH4 0x21A /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ -#define PSC_SND_STATUS2 0x21C /* - * [ 16-bit ] - * Appears to e a read-only status register. - * The usual value is 0x0200. - */ -#define PSC_SND_HUH5 0x21E /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ - -#ifndef __ASSEMBLY__ - -extern volatile __u8 *psc; -extern int psc_present; - -/* - * Access functions - */ - -static inline void psc_write_byte(int offset, __u8 data) -{ - *((volatile __u8 *)(psc + offset)) = data; -} - -static inline void psc_write_word(int offset, __u16 data) -{ - *((volatile __u16 *)(psc + offset)) = data; -} - -static inline void psc_write_long(int offset, __u32 data) -{ - *((volatile __u32 *)(psc + offset)) = data; -} - -static inline u8 psc_read_byte(int offset) -{ - return *((volatile __u8 *)(psc + offset)); -} - -static inline u16 psc_read_word(int offset) -{ - return *((volatile __u16 *)(psc + offset)); -} - -static inline u32 psc_read_long(int offset) -{ - return *((volatile __u32 *)(psc + offset)); -} - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-m68k/mac_via.h b/include/asm-m68k/mac_via.h deleted file mode 100644 index 39afb438b65..00000000000 --- a/include/asm-m68k/mac_via.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * 6522 Versatile Interface Adapter (VIA) - * - * There are two of these on the Mac II. Some IRQ's are vectored - * via them as are assorted bits and bobs - eg rtc, adb. The picture - * is a bit incomplete as the Mac documentation doesn't cover this well - */ - -#ifndef _ASM_MAC_VIA_H_ -#define _ASM_MAC_VIA_H_ - -/* - * Base addresses for the VIAs. There are two in every machine, - * although on some machines the second is an RBV or an OSS. - * The OSS is different enough that it's handled separately. - * - * Do not use these values directly; use the via1 and via2 variables - * instead (and don't forget to check rbv_present when using via2!) - */ - -#define VIA1_BASE (0x50F00000) -#define VIA2_BASE (0x50F02000) -#define RBV_BASE (0x50F26000) - -/* - * Not all of these are true post MacII I think. - * CSA: probably the ones CHRP marks as 'unused' change purposes - * when the IWM becomes the SWIM. - * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html - * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf - * - * also, http://developer.apple.com/technotes/hw/hw_09.html claims the - * following changes for IIfx: - * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP. - * Also, "All of the functionality of VIA2 has been moved to other chips". - */ - -#define VIA1A_vSccWrReq 0x80 /* SCC write. (input) - * [CHRP] SCC WREQ: Reflects the state of the - * Wait/Request pins from the SCC. - * [Macintosh Family Hardware] - * as CHRP on SE/30,II,IIx,IIcx,IIci. - * on IIfx, "0 means an active request" - */ -#define VIA1A_vRev8 0x40 /* Revision 8 board ??? - * [CHRP] En WaitReqB: Lets the WaitReq_L - * signal from port B of the SCC appear on - * the PA7 input pin. Output. - * [Macintosh Family] On the SE/30, this - * is the bit to flip screen buffers. - * 0=alternate, 1=main. - * on II,IIx,IIcx,IIci,IIfx this is a bit - * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx - */ -#define VIA1A_vHeadSel 0x20 /* Head select for IWM. - * [CHRP] unused. - * [Macintosh Family] "Floppy disk - * state-control line SEL" on all but IIfx - */ -#define VIA1A_vOverlay 0x10 /* [Macintosh Family] On SE/30,II,IIx,IIcx - * this bit enables the "Overlay" address - * map in the address decoders as it is on - * reset for mapping the ROM over the reset - * vector. 1=use overlay map. - * On the IIci,IIfx it is another bit of the - * CPU ID: 0=normal IIci, 1=IIci with parity - * feature or IIfx. - * [CHRP] En WaitReqA: Lets the WaitReq_L - * signal from port A of the SCC appear - * on the PA7 input pin (CHRP). Output. - * [MkLinux] "Drive Select" - * (with 0x20 being 'disk head select') - */ -#define VIA1A_vSync 0x08 /* [CHRP] Sync Modem: modem clock select: - * 1: select the external serial clock to - * drive the SCC's /RTxCA pin. - * 0: Select the 3.6864MHz clock to drive - * the SCC cell. - * [Macintosh Family] Correct on all but IIfx - */ - -/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control - * on Macs which had the PWM sound hardware. Reserved on newer models. - * On IIci,IIfx, bits 1-2 are the rest of the CPU ID: - * bit 2: 1=IIci, 0=IIfx - * bit 1: 1 on both IIci and IIfx. - * MkLinux sez bit 0 is 'burnin flag' in this case. - * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as - * inputs, these bits will read 0. - */ -#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */ -#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */ -#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */ - -/* Info on VIA1B is from Macintosh Family Hardware & MkLinux. - * CHRP offers no info. */ -#define VIA1B_vSound 0x80 /* Sound enable (for compatibility with - * PWM hardware) 0=enabled. - * Also, on IIci w/parity, shows parity error - * 0=error, 1=OK. */ -#define VIA1B_vMystery 0x40 /* On IIci, parity enable. 0=enabled,1=disabled - * On SE/30, vertical sync interrupt enable. - * 0=enabled. This vSync interrupt shows up - * as a slot $E interrupt. */ -#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */ -#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */ -#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/ -#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */ -#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */ -#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */ - -/* MkLinux defines the following "VIA1 Register B contents where they - * differ from standard VIA1". From the naming scheme, we assume they - * correspond to a VIA work-alike named 'EVR'. */ -#define EVRB_XCVR 0x08 /* XCVR_SESSION* */ -#define EVRB_FULL 0x10 /* VIA_FULL */ -#define EVRB_SYSES 0x20 /* SYS_SESSION */ -#define EVRB_AUXIE 0x00 /* Enable A/UX Interrupt Scheme */ -#define EVRB_AUXID 0x40 /* Disable A/UX Interrupt Scheme */ -#define EVRB_SFTWRIE 0x00 /* Software Interrupt ReQuest */ -#define EVRB_SFTWRID 0x80 /* Software Interrupt ReQuest */ - -/* - * VIA2 A register is the interrupt lines raised off the nubus - * slots. - * The below info is from 'Macintosh Family Hardware.' - * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.' - * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and - * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike. - * Perhaps OSS uses vRAM1 and vRAM2 for ADB. - */ - -#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */ -#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */ -#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */ -#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */ -#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */ -#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */ -#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */ -#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */ - -/* RAM size bits decoded as follows: - * bit1 bit0 size of ICs in bank A - * 0 0 256 kbit - * 0 1 1 Mbit - * 1 0 4 Mbit - * 1 1 16 Mbit - */ - -/* - * Register B has the fun stuff in it - */ - -#define VIA2B_vVBL 0x80 /* VBL output to VIA1 (60.15Hz) driven by - * timer T1. - * on IIci, parity test: 0=test mode. - * [MkLinux] RBV_PARODD: 1=odd,0=even. */ -#define VIA2B_vSndJck 0x40 /* External sound jack status. - * 0=plug is inserted. On SE/30, always 0 */ -#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */ -#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */ -#define VIA2B_vMode32 0x08 /* 24/32bit switch - doubles as cache flush - * on II, AMU/PMMU control. - * if AMU, 0=24bit to 32bit translation - * if PMMU, 1=PMMU is accessing page table. - * on SE/30 tied low. - * on IIx,IIcx,IIfx, unused. - * on IIci/RBV, cache control. 0=flush cache. - */ -#define VIA2B_vPower 0x04 /* Power off, 0=shut off power. - * on SE/30 this signal sent to PDS card. */ -#define VIA2B_vBusLk 0x02 /* Lock NuBus transactions, 0=locked. - * on SE/30 sent to PDS card. */ -#define VIA2B_vCDis 0x01 /* Cache control. On IIci, 1=disable cache card - * on others, 0=disable processor's instruction - * and data caches. */ - -/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html - * Another example of a valid function that has no ROM support is the use - * of the alternate video page for page-flipping animation. Since there - * is no ROM call to flip pages, it is necessary to go play with the - * right bit in the VIA chip (6522 Versatile Interface Adapter). - * [CSA: don't know which one this is, but it's one of 'em!] - */ - -/* - * 6522 registers - see databook. - * CSA: Assignments for VIA1 confirmed from CHRP spec. - */ - -/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */ -/* Note: 15 VIA regs, 8 RBV regs */ - -#define vBufB 0x0000 /* [VIA/RBV] Register B */ -#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */ -#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */ -#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */ -#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */ -#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */ -#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */ -#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */ -#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ -#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ -#define vSR 0x1400 /* [VIA only] Shift register. */ -#define vACR 0x1600 /* [VIA only] Auxilary control register. */ -#define vPCR 0x1800 /* [VIA only] Peripheral control register. */ - /* CHRP sez never ever to *write* this. - * Mac family says never to *change* this. - * In fact we need to initialize it once at start. */ -#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */ -#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */ -#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */ - -/* The RBV only decodes the bottom eight address lines; the VIA doesn't - * decode the bottom eight -- so vBufB | rBufB will always get you BufB */ -/* CSA: in fact, only bits 0,1, and 4 seem to be decoded. - * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem - * to matter. In fact *all* of the top 8 bits seem to matter; - * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either. - * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999] - */ - -#define rBufB 0x0000 /* [VIA/RBV] Register B */ -#define rExp 0x0001 /* [RBV only] RBV future expansion (always 0) */ -#define rSIFR 0x0002 /* [RBV only] RBV slot interrupts register. */ -#define rIFR 0x1a03 /* [VIA/RBV] RBV interrupt flag register. */ -#define rMonP 0x0010 /* [RBV only] RBV video monitor type. */ -#define rChpT 0x0011 /* [RBV only] RBV test mode register (reads as 0). */ -#define rSIER 0x0012 /* [RBV only] RBV slot interrupt enables. */ -#define rIER 0x1c13 /* [VIA/RBV] RBV interrupt flag enable register. */ -#define rBufA rSIFR /* the 'slot interrupts register' is BufA on a VIA */ - -/* - * Video monitor parameters, for rMonP: - */ -#define RBV_DEPTH 0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */ -#define RBV_MONID 0x38 /* monitor type, as below. */ -#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */ -/* Supported monitor types: */ -#define MON_15BW (1<<3) /* 15" BW portrait. */ -#define MON_IIGS (2<<3) /* 12" color (modified IIGS monitor). */ -#define MON_15RGB (5<<3) /* 15" RGB portrait. */ -#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */ -#define MON_NONE (7<<3) /* No monitor attached. */ - -/* To clarify IER manipulations */ -#define IER_SET_BIT(b) (0x80 | (1<<(b)) ) -#define IER_CLR_BIT(b) (0x7F & (1<<(b)) ) - -#ifndef __ASSEMBLY__ - -extern volatile __u8 *via1,*via2; -extern int rbv_present,via_alt_mapping; - -static inline int rbv_set_video_bpp(int bpp) -{ - char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1; - if (!rbv_present || val<0) return -1; - via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val; - return 0; -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_MAC_VIA_H_ */ diff --git a/include/asm-m68k/machdep.h b/include/asm-m68k/machdep.h deleted file mode 100644 index 5637dcef314..00000000000 --- a/include/asm-m68k/machdep.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _M68K_MACHDEP_H -#define _M68K_MACHDEP_H - -#include -#include - -struct pt_regs; -struct mktime; -struct rtc_time; -struct rtc_pll_info; -struct buffer_head; - -extern void (*mach_sched_init) (irq_handler_t handler); -/* machine dependent irq functions */ -extern void (*mach_init_IRQ) (void); -extern void (*mach_get_model) (char *model); -extern void (*mach_get_hardware_list) (struct seq_file *m); -/* machine dependent timer functions */ -extern unsigned long (*mach_gettimeoffset)(void); -extern int (*mach_hwclk)(int, struct rtc_time*); -extern unsigned int (*mach_get_ss)(void); -extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); -extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); -extern int (*mach_set_clock_mmss)(unsigned long); -extern void (*mach_reset)( void ); -extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); -extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); -extern void (*mach_hd_setup)(char *, int *); -extern long mach_max_dma_address; -extern void (*mach_heartbeat) (int); -extern void (*mach_l2_flush) (int); -extern void (*mach_beep) (unsigned int, unsigned int); - -#endif /* _M68K_MACHDEP_H */ diff --git a/include/asm-m68k/machines.h b/include/asm-m68k/machines.h deleted file mode 100644 index be667e84f01..00000000000 --- a/include/asm-m68k/machines.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * machines.h: Defines for taking apart the machine type value in the - * idprom and determining the kind of machine we are on. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au) - */ -#ifndef _SPARC_MACHINES_H -#define _SPARC_MACHINES_H - -struct Sun_Machine_Models { - char *name; - unsigned char id_machtype; -}; - -/* Current number of machines we know about that has an IDPROM - * machtype entry including one entry for the 0x80 OBP machines. - */ -// reduced along with table in arch/m68k/sun3/idprom.c -// sun3 port doesn't need to know about sparc machines. -//#define NUM_SUN_MACHINES 23 -#define NUM_SUN_MACHINES 8 - -/* The machine type in the idprom area looks like this: - * - * --------------- - * | ARCH | MACH | - * --------------- - * 7 4 3 0 - * - * The ARCH field determines the architecture line (sun4, sun4c, etc). - * The MACH field determines the machine make within that architecture. - */ - -#define SM_ARCH_MASK 0xf0 -#define SM_SUN3 0x10 -#define SM_SUN4 0x20 -#define SM_SUN3X 0x40 -#define SM_SUN4C 0x50 -#define SM_SUN4M 0x70 -#define SM_SUN4M_OBP 0x80 - -#define SM_TYP_MASK 0x0f -/* Sun3 machines */ -#define SM_3_160 0x01 /* Sun 3/160 series */ -#define SM_3_50 0x02 /* Sun 3/50 series */ -#define SM_3_260 0x03 /* Sun 3/260 series */ -#define SM_3_110 0x04 /* Sun 3/110 series */ -#define SM_3_60 0x07 /* Sun 3/60 series */ -#define SM_3_E 0x08 /* Sun 3/E series */ - -/* Sun3x machines */ -#define SM_3_460 0x01 /* Sun 3/460 (460,470,480) series */ -#define SM_3_80 0x02 /* Sun 3/80 series */ - -/* Sun4 machines */ -#define SM_4_260 0x01 /* Sun 4/200 series */ -#define SM_4_110 0x02 /* Sun 4/100 series */ -#define SM_4_330 0x03 /* Sun 4/300 series */ -#define SM_4_470 0x04 /* Sun 4/400 series */ - -/* Sun4c machines Full Name - PROM NAME */ -#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ -#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ -#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ -#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ -#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ -#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ -#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ - -/* Sun4m machines, these predate the OpenBoot. These values only mean - * something if the value in the ARCH field is SM_SUN4M, if it is - * SM_SUN4M_OBP then you have the following situation: - * 1) You either have a sun4d, a sun4e, or a recently made sun4m. - * 2) You have to consult OpenBoot to determine which machine this is. - */ -#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ -#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ -#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ - -/* Sun4d machines -- N/A */ -/* Sun4e machines -- N/A */ -/* Sun4u machines -- N/A */ - -#endif /* !(_SPARC_MACHINES_H) */ diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h deleted file mode 100644 index 2b4de0c2ce4..00000000000 --- a/include/asm-m68k/machw.h +++ /dev/null @@ -1,49 +0,0 @@ -/* -** linux/machw.h -- This header defines some macros and pointers for -** the various Macintosh custom hardware registers. -** -** Copyright 1997 by Michael Schmitz -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _ASM_MACHW_H_ -#define _ASM_MACHW_H_ - -/* - * head.S maps the videomem to VIDEOMEMBASE - */ - -#define VIDEOMEMBASE 0xf0000000 -#define VIDEOMEMSIZE (4096*1024) -#define VIDEOMEMMASK (-4096*1024) - -#ifndef __ASSEMBLY__ - -#include - -#if 0 -/* -** SCC Z8530 -*/ - -#define MAC_SCC_BAS (0x50F04000) -struct MAC_SCC - { - u_char cha_a_ctrl; - u_char char_dummy1; - u_char cha_a_data; - u_char char_dummy2; - u_char cha_b_ctrl; - u_char char_dummy3; - u_char cha_b_data; - }; -# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS)) -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* linux/machw.h */ diff --git a/include/asm-m68k/macintosh.h b/include/asm-m68k/macintosh.h deleted file mode 100644 index 05309f7e3d0..00000000000 --- a/include/asm-m68k/macintosh.h +++ /dev/null @@ -1,135 +0,0 @@ -#ifndef __ASM_MACINTOSH_H -#define __ASM_MACINTOSH_H - -#include -#include - -/* - * Apple Macintoshisms - */ - -extern void mac_reset(void); -extern void mac_poweroff(void); -extern void mac_init_IRQ(void); -extern int mac_irq_pending(unsigned int); - -/* - * Floppy driver magic hook - probably shouldnt be here - */ - -extern void via1_set_head(int); - -/* - * Macintosh Table - */ - -struct mac_model -{ - short ident; - char *name; - char adb_type; - char via_type; - char scsi_type; - char ide_type; - char scc_type; - char ether_type; - char nubus_type; -}; - -#define MAC_ADB_NONE 0 -#define MAC_ADB_II 1 -#define MAC_ADB_IISI 2 -#define MAC_ADB_CUDA 3 -#define MAC_ADB_PB1 4 -#define MAC_ADB_PB2 5 -#define MAC_ADB_IOP 6 - -#define MAC_VIA_II 1 -#define MAC_VIA_IIci 2 -#define MAC_VIA_QUADRA 3 - -#define MAC_SCSI_NONE 0 -#define MAC_SCSI_OLD 1 -#define MAC_SCSI_QUADRA 2 -#define MAC_SCSI_QUADRA2 3 -#define MAC_SCSI_QUADRA3 4 - -#define MAC_IDE_NONE 0 -#define MAC_IDE_QUADRA 1 -#define MAC_IDE_PB 2 -#define MAC_IDE_BABOON 3 - -#define MAC_SCC_II 1 -#define MAC_SCC_IOP 2 -#define MAC_SCC_QUADRA 3 -#define MAC_SCC_PSC 4 - -#define MAC_ETHER_NONE 0 -#define MAC_ETHER_SONIC 1 -#define MAC_ETHER_MACE 2 - -#define MAC_NO_NUBUS 0 -#define MAC_NUBUS 1 - -/* - * Gestalt numbers - */ - -#define MAC_MODEL_II 6 -#define MAC_MODEL_IIX 7 -#define MAC_MODEL_IICX 8 -#define MAC_MODEL_SE30 9 -#define MAC_MODEL_IICI 11 -#define MAC_MODEL_IIFX 13 /* And well numbered it is too */ -#define MAC_MODEL_IISI 18 -#define MAC_MODEL_LC 19 -#define MAC_MODEL_Q900 20 -#define MAC_MODEL_PB170 21 -#define MAC_MODEL_Q700 22 -#define MAC_MODEL_CLII 23 /* aka: P200 */ -#define MAC_MODEL_PB140 25 -#define MAC_MODEL_Q950 26 /* aka: WGS95 */ -#define MAC_MODEL_LCIII 27 /* aka: P450 */ -#define MAC_MODEL_PB210 29 -#define MAC_MODEL_C650 30 -#define MAC_MODEL_PB230 32 -#define MAC_MODEL_PB180 33 -#define MAC_MODEL_PB160 34 -#define MAC_MODEL_Q800 35 /* aka: WGS80 */ -#define MAC_MODEL_Q650 36 -#define MAC_MODEL_LCII 37 /* aka: P400/405/410/430 */ -#define MAC_MODEL_PB250 38 -#define MAC_MODEL_IIVI 44 -#define MAC_MODEL_P600 45 /* aka: P600CD */ -#define MAC_MODEL_IIVX 48 -#define MAC_MODEL_CCL 49 /* aka: P250 */ -#define MAC_MODEL_PB165C 50 -#define MAC_MODEL_C610 52 /* aka: WGS60 */ -#define MAC_MODEL_Q610 53 -#define MAC_MODEL_PB145 54 /* aka: PB145B */ -#define MAC_MODEL_P520 56 /* aka: LC520 */ -#define MAC_MODEL_C660 60 -#define MAC_MODEL_P460 62 /* aka: LCIII+, P466/P467 */ -#define MAC_MODEL_PB180C 71 -#define MAC_MODEL_PB520 72 /* aka: PB520C, PB540, PB540C, PB550C */ -#define MAC_MODEL_PB270C 77 -#define MAC_MODEL_Q840 78 -#define MAC_MODEL_P550 80 /* aka: LC550, P560 */ -#define MAC_MODEL_CCLII 83 /* aka: P275 */ -#define MAC_MODEL_PB165 84 -#define MAC_MODEL_PB190 85 /* aka: PB190CS */ -#define MAC_MODEL_TV 88 -#define MAC_MODEL_P475 89 /* aka: LC475, P476 */ -#define MAC_MODEL_P475F 90 /* aka: P475 w/ FPU (no LC040) */ -#define MAC_MODEL_P575 92 /* aka: LC575, P577/P578 */ -#define MAC_MODEL_Q605 94 -#define MAC_MODEL_Q605_ACC 95 /* Q605 accelerated to 33 MHz */ -#define MAC_MODEL_Q630 98 /* aka: LC630, P630/631/635/636/637/638/640 */ -#define MAC_MODEL_P588 99 /* aka: LC580, P580 */ -#define MAC_MODEL_PB280 102 -#define MAC_MODEL_PB280C 103 -#define MAC_MODEL_PB150 115 - -extern struct mac_model *macintosh_config; - -#endif diff --git a/include/asm-m68k/macints.h b/include/asm-m68k/macints.h deleted file mode 100644 index 679c48ab440..00000000000 --- a/include/asm-m68k/macints.h +++ /dev/null @@ -1,155 +0,0 @@ -/* -** macints.h -- Macintosh Linux interrupt handling structs and prototypes -** -** Copyright 1997 by Michael Schmitz -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -*/ - -#ifndef _ASM_MACINTS_H_ -#define _ASM_MACINTS_H_ - -#include - -/* Setting this prints debugging info for unclaimed interrupts */ - -#define DEBUG_SPURIOUS - -/* Setting this prints debugging info on each autovector interrupt */ - -/* #define DEBUG_IRQS */ - -/* Setting this prints debugging info on each Nubus interrupt */ - -/* #define DEBUG_NUBUS_INT */ - -/* Setting this prints debugging info on irqs as they enabled and disabled. */ - -/* #define DEBUG_IRQUSE */ - -/* - * Base IRQ number for all Mac68K interrupt sources. Each source - * has eight indexes (base -> base+7). - */ - -#define VIA1_SOURCE_BASE 8 -#define VIA2_SOURCE_BASE 16 -#define MAC_SCC_SOURCE_BASE 24 -#define PSC3_SOURCE_BASE 24 -#define PSC4_SOURCE_BASE 32 -#define PSC5_SOURCE_BASE 40 -#define PSC6_SOURCE_BASE 48 -#define NUBUS_SOURCE_BASE 56 -#define BABOON_SOURCE_BASE 64 - -/* - * Maximum IRQ number is BABOON_SOURCE_BASE + 7, - * giving us IRQs up through 71 - */ - -#define NUM_MAC_SOURCES 72 - -/* - * clean way to separate IRQ into its source and index - */ - -#define IRQ_SRC(irq) (irq >> 3) -#define IRQ_IDX(irq) (irq & 7) - -/* VIA1 interrupts */ -#define IRQ_VIA1_0 (8) /* one second int. */ -#define IRQ_VIA1_1 (9) /* VBlank int. */ -#define IRQ_MAC_VBL IRQ_VIA1_1 -#define IRQ_VIA1_2 (10) /* ADB SR shifts complete */ -#define IRQ_MAC_ADB IRQ_VIA1_2 -#define IRQ_MAC_ADB_SR IRQ_VIA1_2 -#define IRQ_VIA1_3 (11) /* ADB SR CB2 ?? */ -#define IRQ_MAC_ADB_SD IRQ_VIA1_3 -#define IRQ_VIA1_4 (12) /* ADB SR ext. clock pulse */ -#define IRQ_MAC_ADB_CL IRQ_VIA1_4 -#define IRQ_VIA1_5 (13) -#define IRQ_MAC_TIMER_2 IRQ_VIA1_5 -#define IRQ_VIA1_6 (14) -#define IRQ_MAC_TIMER_1 IRQ_VIA1_6 -#define IRQ_VIA1_7 (15) - -/* VIA2/RBV interrupts */ -#define IRQ_VIA2_0 (16) -#define IRQ_MAC_SCSIDRQ IRQ_VIA2_0 -#define IRQ_VIA2_1 (17) -#define IRQ_MAC_NUBUS IRQ_VIA2_1 -#define IRQ_VIA2_2 (18) -#define IRQ_VIA2_3 (19) -#define IRQ_MAC_SCSI IRQ_VIA2_3 -#define IRQ_VIA2_4 (20) -#define IRQ_VIA2_5 (21) -#define IRQ_VIA2_6 (22) -#define IRQ_VIA2_7 (23) - -/* Level 3 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC3_0 (24) -#define IRQ_MAC_MACE IRQ_PSC3_0 -#define IRQ_PSC3_1 (25) -#define IRQ_PSC3_2 (26) -#define IRQ_PSC3_3 (27) - -/* Level 4 (SCC) interrupts */ -#define IRQ_SCC (32) -#define IRQ_SCCA (33) -#define IRQ_SCCB (34) -#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */ -/* SCC interrupts */ -#define IRQ_SCCB_TX (32) -#define IRQ_SCCB_STAT (33) -#define IRQ_SCCB_RX (34) -#define IRQ_SCCB_SPCOND (35) -#define IRQ_SCCA_TX (36) -#define IRQ_SCCA_STAT (37) -#define IRQ_SCCA_RX (38) -#define IRQ_SCCA_SPCOND (39) -#endif - -/* Level 4 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC4_0 (32) -#define IRQ_PSC4_1 (33) -#define IRQ_PSC4_2 (34) -#define IRQ_PSC4_3 (35) -#define IRQ_MAC_MACE_DMA IRQ_PSC4_3 - -/* Level 5 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC5_0 (40) -#define IRQ_PSC5_1 (41) -#define IRQ_PSC5_2 (42) -#define IRQ_PSC5_3 (43) - -/* Level 6 (PSC, AV Macs only) interrupts */ -#define IRQ_PSC6_0 (48) -#define IRQ_PSC6_1 (49) -#define IRQ_PSC6_2 (50) -#define IRQ_PSC6_3 (51) - -/* Nubus interrupts (cascaded to VIA2) */ -#define IRQ_NUBUS_9 (56) -#define IRQ_NUBUS_A (57) -#define IRQ_NUBUS_B (58) -#define IRQ_NUBUS_C (59) -#define IRQ_NUBUS_D (60) -#define IRQ_NUBUS_E (61) -#define IRQ_NUBUS_F (62) - -/* Baboon interrupts (cascaded to nubus slot $C) */ -#define IRQ_BABOON_0 (64) -#define IRQ_BABOON_1 (65) -#define IRQ_BABOON_2 (66) -#define IRQ_BABOON_3 (67) - -#define SLOT2IRQ(x) (x + 47) -#define IRQ2SLOT(x) (x - 47) - -#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ -#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ - -#endif /* asm/macints.h */ diff --git a/include/asm-m68k/math-emu.h b/include/asm-m68k/math-emu.h deleted file mode 100644 index ddfab96403c..00000000000 --- a/include/asm-m68k/math-emu.h +++ /dev/null @@ -1,315 +0,0 @@ -#ifndef _ASM_M68K_SETUP_H -#define _ASM_M68K_SETUP_H - -#include -#include - -/* Status Register bits */ - -/* accrued exception bits */ -#define FPSR_AEXC_INEX 3 -#define FPSR_AEXC_DZ 4 -#define FPSR_AEXC_UNFL 5 -#define FPSR_AEXC_OVFL 6 -#define FPSR_AEXC_IOP 7 - -/* exception status bits */ -#define FPSR_EXC_INEX1 8 -#define FPSR_EXC_INEX2 9 -#define FPSR_EXC_DZ 10 -#define FPSR_EXC_UNFL 11 -#define FPSR_EXC_OVFL 12 -#define FPSR_EXC_OPERR 13 -#define FPSR_EXC_SNAN 14 -#define FPSR_EXC_BSUN 15 - -/* quotient byte, assumes big-endian, of course */ -#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) - -/* condition code bits */ -#define FPSR_CC_NAN 24 -#define FPSR_CC_INF 25 -#define FPSR_CC_Z 26 -#define FPSR_CC_NEG 27 - - -/* Control register bits */ - -/* rounding mode */ -#define FPCR_ROUND_RN 0 /* round to nearest/even */ -#define FPCR_ROUND_RZ 1 /* round to zero */ -#define FPCR_ROUND_RM 2 /* minus infinity */ -#define FPCR_ROUND_RP 3 /* plus infinity */ - -/* rounding precision */ -#define FPCR_PRECISION_X 0 /* long double */ -#define FPCR_PRECISION_S 1 /* double */ -#define FPCR_PRECISION_D 2 /* float */ - - -/* Flags to select the debugging output */ -#define PDECODE 0 -#define PEXECUTE 1 -#define PCONV 2 -#define PNORM 3 -#define PREGISTER 4 -#define PINSTR 5 -#define PUNIMPL 6 -#define PMOVEM 7 - -#define PMDECODE (1< -#include - -union fp_mant64 { - unsigned long long m64; - unsigned long m32[2]; -}; - -union fp_mant128 { - unsigned long long m64[2]; - unsigned long m32[4]; -}; - -/* internal representation of extended fp numbers */ -struct fp_ext { - unsigned char lowmant; - unsigned char sign; - unsigned short exp; - union fp_mant64 mant; -}; - -/* C representation of FPU registers */ -/* NOTE: if you change this, you have to change the assembler offsets - below and the size in , too */ -struct fp_data { - struct fp_ext fpreg[8]; - unsigned int fpcr; - unsigned int fpsr; - unsigned int fpiar; - unsigned short prec; - unsigned short rnd; - struct fp_ext temp[2]; -}; - -#ifdef FPU_EMU_DEBUG -extern unsigned int fp_debugprint; - -#define dprint(bit, fmt, args...) ({ \ - if (fp_debugprint & (1 << (bit))) \ - printk(fmt, ## args); \ -}) -#else -#define dprint(bit, fmt, args...) -#endif - -#define uprint(str) ({ \ - static int __count = 3; \ - \ - if (__count > 0) { \ - printk("You just hit an unimplemented " \ - "fpu instruction (%s)\n", str); \ - printk("Please report this to ....\n"); \ - __count--; \ - } \ -}) - -#define FPDATA ((struct fp_data *)current->thread.fp) - -#else /* __ASSEMBLY__ */ - -#define FPDATA %a2 - -/* offsets from the base register to the floating point data in the task struct */ -#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) -#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) -#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) -#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) -#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) -#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) -#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) -#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) -#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) - -/* offsets on the stack to access saved registers, - * these are only used during instruction decoding - * where we always know how deep we're on the stack. - */ -#define FPS_DO (PT_D0) -#define FPS_D1 (PT_D1) -#define FPS_D2 (PT_D2) -#define FPS_A0 (PT_A0) -#define FPS_A1 (PT_A1) -#define FPS_A2 (PT_A2) -#define FPS_SR (PT_SR) -#define FPS_PC (PT_PC) -#define FPS_EA (PT_PC+6) -#define FPS_PC2 (PT_PC+10) - -.macro fp_get_fp_reg - lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 - lea (%a0,%d0.w*8),%a0 -.endm - -/* Macros used to get/put the current program counter. - * 020/030 use a different stack frame then 040/060, for the - * 040/060 the return pc points already to the next location, - * so this only needs to be modified for jump instructions. - */ -.macro fp_get_pc dest - move.l (FPS_PC+4,%sp),\dest -.endm - -.macro fp_put_pc src,jump=0 - move.l \src,(FPS_PC+4,%sp) -.endm - -.macro fp_get_instr_data f,s,dest,label - getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) - addq.l #\s,%sp@(FPS_PC+4) -.endm - -.macro fp_get_instr_word dest,label,addr - fp_get_instr_data w,2,\dest,\label,\addr -.endm - -.macro fp_get_instr_long dest,label,addr - fp_get_instr_data l,4,\dest,\label,\addr -.endm - -/* These macros are used to read from/write to user space - * on error we jump to the fixup section, load the fault - * address into %a0 and jump to the exit. - * (derived from ) - */ -.macro getuser size,src,dest,label,addr -| printf ,"[\size<%08x]",1,\addr -.Lu1\@: moves\size \src,\dest - - .section .fixup,"ax" - .even -.Lu2\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu2\@ - .previous -.endm - -.macro putuser size,src,dest,label,addr -| printf ,"[\size>%08x]",1,\addr -.Lu1\@: moves\size \src,\dest -.Lu2\@: - - .section .fixup,"ax" - .even -.Lu3\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu3\@ - .long .Lu2\@,.Lu3\@ - .previous -.endm - -/* work around binutils idiocy */ -old_gas=-1 -.irp gas_ident.x .x -old_gas=old_gas+1 -.endr -.if !old_gas -.irp m b,w,l -.macro getuser.\m src,dest,label,addr - getuser .\m,\src,\dest,\label,\addr -.endm -.macro putuser.\m src,dest,label,addr - putuser .\m,\src,\dest,\label,\addr -.endm -.endr -.endif - -.macro movestack nr,arg1,arg2,arg3,arg4,arg5 - .if \nr - movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 - move.l \arg1,-(%sp) - .endif -.endm - -.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 -#ifdef FPU_EMU_DEBUG - .data -.Lpdata\@: - .string "\string" - .previous - - movem.l %d0/%d1/%a0/%a1,-(%sp) - .if \bit+1 -#if 0 - moveq #\bit,%d0 - andw #7,%d0 - btst %d0,fp_debugprint+((31-\bit)/8) -#else - btst #\bit,fp_debugprint+((31-\bit)/8) -#endif - jeq .Lpskip\@ - .endif - movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 - pea .Lpdata\@ - jsr printk - lea ((\nr+1)*4,%sp),%sp -.Lpskip\@: - movem.l (%sp)+,%d0/%d1/%a0/%a1 -#endif -.endm - -.macro printx bit,fp -#ifdef FPU_EMU_DEBUG - movem.l %d0/%a0,-(%sp) - lea \fp,%a0 -#if 0 - moveq #'+',%d0 - tst.w (%a0) - jeq .Lx1\@ - moveq #'-',%d0 -.Lx1\@: printf \bit," %c",1,%d0 - move.l (4,%a0),%d0 - bclr #31,%d0 - jne .Lx2\@ - printf \bit,"0." - jra .Lx3\@ -.Lx2\@: printf \bit,"1." -.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) - move.w (2,%a0),%d0 - ext.l %d0 - printf \bit,"E%04x",1,%d0 -#else - printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) -#endif - movem.l (%sp)+,%d0/%a0 -#endif -.endm - -.macro debug instr,args -#ifdef FPU_EMU_DEBUG - \instr \args -#endif -.endm - - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_M68K_SETUP_H */ diff --git a/include/asm-m68k/mc146818rtc.h b/include/asm-m68k/mc146818rtc.h deleted file mode 100644 index 9f70a01f73d..00000000000 --- a/include/asm-m68k/mc146818rtc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _ASM_MC146818RTC_H -#define _ASM_MC146818RTC_H - - -#ifdef CONFIG_ATARI -/* RTC in Atari machines */ - -#include - -#define RTC_PORT(x) (TT_RTC_BAS + 2*(x)) -#define RTC_ALWAYS_BCD 0 - -#define CMOS_READ(addr) ({ \ -atari_outb_p((addr),RTC_PORT(0)); \ -atari_inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -atari_outb_p((addr),RTC_PORT(0)); \ -atari_outb_p((val),RTC_PORT(1)); \ -}) -#endif /* CONFIG_ATARI */ - -#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-m68k/md.h b/include/asm-m68k/md.h deleted file mode 100644 index d2f78f226f3..00000000000 --- a/include/asm-m68k/md.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * md.h: High speed xor_block operation for RAID4/5 - * - */ - -#ifndef __ASM_MD_H -#define __ASM_MD_H - -/* #define HAVE_ARCH_XORBLOCK */ - -#define MD_XORBLOCK_ALIGNMENT sizeof(long) - -#endif /* __ASM_MD_H */ diff --git a/include/asm-m68k/mman.h b/include/asm-m68k/mman.h deleted file mode 100644 index 1626d37f489..00000000000 --- a/include/asm-m68k/mman.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __M68K_MMAN_H__ -#define __M68K_MMAN_H__ - -#include - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __M68K_MMAN_H__ */ diff --git a/include/asm-m68k/mmu.h b/include/asm-m68k/mmu.h deleted file mode 100644 index ccd36d26615..00000000000 --- a/include/asm-m68k/mmu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#endif diff --git a/include/asm-m68k/mmu_context.h b/include/asm-m68k/mmu_context.h deleted file mode 100644 index 894dacbcee1..00000000000 --- a/include/asm-m68k/mmu_context.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __M68K_MMU_CONTEXT_H -#define __M68K_MMU_CONTEXT_H - -#include - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifndef CONFIG_SUN3 - -#include -#include -#include - -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - mm->context = virt_to_phys(mm->pgd); - return 0; -} - -#define destroy_context(mm) do { } while(0) - -static inline void switch_mm_0230(struct mm_struct *mm) -{ - unsigned long crp[2] = { - 0x80000000 | _PAGE_TABLE, mm->context - }; - unsigned long tmp; - - asm volatile (".chip 68030"); - - /* flush MC68030/MC68020 caches (they are virtually addressed) */ - asm volatile ( - "movec %%cacr,%0;" - "orw %1,%0; " - "movec %0,%%cacr" - : "=d" (tmp) : "di" (FLUSH_I_AND_D)); - - /* Switch the root pointer. For a 030-only kernel, - * avoid flushing the whole ATC, we only need to - * flush the user entries. The 68851 does this by - * itself. Avoid a runtime check here. - */ - asm volatile ( -#ifdef CPU_M68030_ONLY - "pmovefd %0,%%crp; " - "pflush #0,#4" -#else - "pmove %0,%%crp" -#endif - : : "m" (crp[0])); - - asm volatile (".chip 68k"); -} - -static inline void switch_mm_0460(struct mm_struct *mm) -{ - asm volatile (".chip 68040"); - - /* flush address translation cache (user entries) */ - asm volatile ("pflushan"); - - /* switch the root pointer */ - asm volatile ("movec %0,%%urp" : : "r" (mm->context)); - - if (CPU_IS_060) { - unsigned long tmp; - - /* clear user entries in the branch cache */ - asm volatile ( - "movec %%cacr,%0; " - "orl %1,%0; " - "movec %0,%%cacr" - : "=d" (tmp): "di" (0x00200000)); - } - - asm volatile (".chip 68k"); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ - if (prev != next) { - if (CPU_IS_020_OR_030) - switch_mm_0230(next); - else - switch_mm_0460(next); - } -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - next_mm->context = virt_to_phys(next_mm->pgd); - - if (CPU_IS_020_OR_030) - switch_mm_0230(next_mm); - else - switch_mm_0460(next_mm); -} - -#else /* CONFIG_SUN3 */ -#include -#include - -extern unsigned long get_free_context(struct mm_struct *mm); -extern void clear_context(unsigned long context); - -/* set the context for a new task to unmapped */ -static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - mm->context = SUN3_INVALID_CONTEXT; - return 0; -} - -/* find the context given to this process, and if it hasn't already - got one, go get one for it. */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - if(mm->context == SUN3_INVALID_CONTEXT) - mm->context = get_free_context(mm); -} - -/* flush context if allocated... */ -static inline void destroy_context(struct mm_struct *mm) -{ - if(mm->context != SUN3_INVALID_CONTEXT) - clear_context(mm->context); -} - -static inline void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - sun3_put_context(mm->context); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ - activate_context(tsk->mm); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ - activate_context(next_mm); -} - -#endif -#endif diff --git a/include/asm-m68k/mmzone.h b/include/asm-m68k/mmzone.h deleted file mode 100644 index e1f1ec7b700..00000000000 --- a/include/asm-m68k/mmzone.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ASM_M68K_MMZONE_H_ -#define _ASM_M68K_MMZONE_H_ - -extern pg_data_t pg_data_map[]; - -#define NODE_DATA(nid) (&pg_data_map[nid]) -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#endif /* _ASM_M68K_MMZONE_H_ */ diff --git a/include/asm-m68k/module.h b/include/asm-m68k/module.h deleted file mode 100644 index 382d20a6fc1..00000000000 --- a/include/asm-m68k/module.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_M68K_MODULE_H -#define _ASM_M68K_MODULE_H - -struct mod_arch_specific { - struct m68k_fixup_info *fixup_start, *fixup_end; -}; - -#define MODULE_ARCH_INIT { \ - .fixup_start = __start_fixup, \ - .fixup_end = __stop_fixup, \ -} - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - - -enum m68k_fixup_type { - m68k_fixup_memoffset, - m68k_fixup_vnode_shift, -}; - -struct m68k_fixup_info { - enum m68k_fixup_type type; - void *addr; -}; - -#define m68k_fixup(type, addr) \ - " .section \".m68k_fixup\",\"aw\"\n" \ - " .long " #type "," #addr "\n" \ - " .previous\n" - -extern struct m68k_fixup_info __start_fixup[], __stop_fixup[]; - -struct module; -extern void module_fixup(struct module *mod, struct m68k_fixup_info *start, - struct m68k_fixup_info *end); - -#endif /* _ASM_M68K_MODULE_H */ diff --git a/include/asm-m68k/motorola_pgalloc.h b/include/asm-m68k/motorola_pgalloc.h deleted file mode 100644 index d08bf6261df..00000000000 --- a/include/asm-m68k/motorola_pgalloc.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef _MOTOROLA_PGALLOC_H -#define _MOTOROLA_PGALLOC_H - -#include -#include - -extern pmd_t *get_pointer_table(void); -extern int free_pointer_table(pmd_t *); - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte; - - pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - - return pte; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - cache_page(pte); - free_page((unsigned long) pte); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0); - pte_t *pte; - - if(!page) - return NULL; - - pte = kmap(page); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - kunmap(pte); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t page) -{ - pgtable_page_dtor(page); - cache_page(kmap(page)); - kunmap(page); - __free_page(page); -} - -static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page) -{ - pgtable_page_dtor(page); - cache_page(kmap(page)); - kunmap(page); - __free_page(page); -} - - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) -{ - return get_pointer_table(); -} - -static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - return free_pointer_table(pmd); -} - -static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd) -{ - return free_pointer_table(pmd); -} - - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - pmd_free(mm, (pmd_t *)pgd); -} - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return (pgd_t *)get_pointer_table(); -} - - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) -{ - pmd_set(pmd, pte); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) -{ - pmd_set(pmd, page_address(page)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd) -{ - pgd_set(pgd, pmd); -} - -#endif /* _MOTOROLA_PGALLOC_H */ diff --git a/include/asm-m68k/motorola_pgtable.h b/include/asm-m68k/motorola_pgtable.h deleted file mode 100644 index 8e9a8a754dd..00000000000 --- a/include/asm-m68k/motorola_pgtable.h +++ /dev/null @@ -1,291 +0,0 @@ -#ifndef _MOTOROLA_PGTABLE_H -#define _MOTOROLA_PGTABLE_H - - -/* - * Definitions for MMU descriptors - */ -#define _PAGE_PRESENT 0x001 -#define _PAGE_SHORT 0x002 -#define _PAGE_RONLY 0x004 -#define _PAGE_ACCESSED 0x008 -#define _PAGE_DIRTY 0x010 -#define _PAGE_SUPER 0x080 /* 68040 supervisor only */ -#define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */ -#define _PAGE_NOCACHE030 0x040 /* 68030 no-cache mode */ -#define _PAGE_NOCACHE 0x060 /* 68040 cache mode, non-serialized */ -#define _PAGE_NOCACHE_S 0x040 /* 68040 no-cache mode, serialized */ -#define _PAGE_CACHE040 0x020 /* 68040 cache mode, cachable, copyback */ -#define _PAGE_CACHE040W 0x000 /* 68040 cache mode, cachable, write-through */ - -#define _DESCTYPE_MASK 0x003 - -#define _CACHEMASK040 (~0x060) -#define _TABLE_MASK (0xfffffe00) - -#define _PAGE_TABLE (_PAGE_SHORT) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE) - -#define _PAGE_PROTNONE 0x004 -#define _PAGE_FILE 0x008 /* pagecache or swap? */ - -#ifndef __ASSEMBLY__ - -/* This is the cache mode to be used for pages containing page descriptors for - * processors >= '040. It is in pte_mknocache(), and the variable is defined - * and initialized in head.S */ -extern int m68k_pgtable_cachemode; - -/* This is the cache mode for normal pages, for supervisor access on - * processors >= '040. It is used in pte_mkcache(), and the variable is - * defined and initialized in head.S */ - -#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH) -#define m68k_supervisor_cachemode _PAGE_CACHE040W -#elif defined(CPU_M68040_OR_M68060_ONLY) -#define m68k_supervisor_cachemode _PAGE_CACHE040 -#elif defined(CPU_M68020_OR_M68030_ONLY) -#define m68k_supervisor_cachemode 0 -#else -extern int m68k_supervisor_cachemode; -#endif - -#if defined(CPU_M68040_OR_M68060_ONLY) -#define mm_cachebits _PAGE_CACHE040 -#elif defined(CPU_M68020_OR_M68030_ONLY) -#define mm_cachebits 0 -#else -extern unsigned long mm_cachebits; -#endif - -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits) - -/* Alternate definitions that are compile time constants, for - initializing protection_map. The cachebits are fixed later. */ -#define PAGE_NONE_C __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) -#define PAGE_SHARED_C __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) -#define PAGE_COPY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) -#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED) - -/* - * The m68k can't do page protection for execute, and considers that the same are read. - * Also, write permissions imply read permissions. This is the closest we can get.. - */ -#define __P000 PAGE_NONE_C -#define __P001 PAGE_READONLY_C -#define __P010 PAGE_COPY_C -#define __P011 PAGE_COPY_C -#define __P100 PAGE_READONLY_C -#define __P101 PAGE_READONLY_C -#define __P110 PAGE_COPY_C -#define __P111 PAGE_COPY_C - -#define __S000 PAGE_NONE_C -#define __S001 PAGE_READONLY_C -#define __S010 PAGE_SHARED_C -#define __S011 PAGE_SHARED_C -#define __S100 PAGE_READONLY_C -#define __S101 PAGE_READONLY_C -#define __S110 PAGE_SHARED_C -#define __S111 PAGE_SHARED_C - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) -{ - unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED; - unsigned long *ptr = pmdp->pmd; - short i = 16; - while (--i >= 0) { - *ptr++ = ptbl; - ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16); - } -} - -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -{ - pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp); -} - -#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK)) -#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK)) -#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK)) - - -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,ptep) ({ pte_val(*(ptep)) = 0; }) - -#define pte_page(pte) virt_to_page(__va(pte_val(pte))) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE) -#define pmd_present(pmd) (pmd_val(pmd) & _PAGE_TABLE) -#define pmd_clear(pmdp) ({ \ - unsigned long *__ptr = pmdp->pmd; \ - short __i = 16; \ - while (--__i >= 0) \ - *__ptr++ = 0; \ -}) -#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd))) - - -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE) -#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_TABLE) -#define pgd_clear(pgdp) ({ pgd_val(*pgdp) = 0; }) -#define pgd_page(pgd) (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT)) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return !(pte_val(pte) & _PAGE_RONLY); } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) |= _PAGE_RONLY; return pte; } -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) &= ~_PAGE_RONLY; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mknocache(pte_t pte) -{ - pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode; - return pte; -} -static inline pte_t pte_mkcache(pte_t pte) -{ - pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode; - return pte; -} -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address)) - -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -/* to find an entry in a page-table-directory */ -static inline pgd_t *pgd_offset(const struct mm_struct *mm, - unsigned long address) -{ - return mm->pgd + pgd_index(address); -} - -#define swapper_pg_dir kernel_pg_dir -extern pgd_t kernel_pg_dir[128]; - -static inline pgd_t *pgd_offset_k(unsigned long address) -{ - return kernel_pg_dir + (address >> PGDIR_SHIFT); -} - - -/* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) -{ - return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1)); -} - -/* Find an entry in the third-level page table.. */ -static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address) -{ - return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); -} - -#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) -#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address) -#define pte_unmap(pte) ((void)0) -#define pte_unmap_nested(pte) ((void)0) - -/* - * Allocate and free page tables. The xxx_kernel() versions are - * used to allocate a kernel page table - this turns on ASN bits - * if any. - */ - -/* Prior to calling these routines, the page should have been flushed - * from both the cache and ATC, or the CPU might not notice that the - * cache setting for the page has been changed. -jskov - */ -static inline void nocache_page(void *vaddr) -{ - unsigned long addr = (unsigned long)vaddr; - - if (CPU_IS_040_OR_060) { - pgd_t *dir; - pmd_t *pmdp; - pte_t *ptep; - - dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); - ptep = pte_offset_kernel(pmdp, addr); - *ptep = pte_mknocache(*ptep); - } -} - -static inline void cache_page(void *vaddr) -{ - unsigned long addr = (unsigned long)vaddr; - - if (CPU_IS_040_OR_060) { - pgd_t *dir; - pmd_t *pmdp; - pte_t *ptep; - - dir = pgd_offset_k(addr); - pmdp = pmd_offset(dir, addr); - ptep = pte_offset_kernel(pmdp, addr); - *ptep = pte_mkcache(*ptep); - } -} - -#define PTE_FILE_MAX_BITS 28 - -static inline unsigned long pte_to_pgoff(pte_t pte) -{ - return pte.pte >> 4; -} - -static inline pte_t pgoff_to_pte(unsigned off) -{ - pte_t pte = { (off << 4) + _PAGE_FILE }; - return pte; -} - -/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */ -#define __swp_type(x) (((x).val >> 4) & 0xff) -#define __swp_offset(x) ((x).val >> 12) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ -#endif /* _MOTOROLA_PGTABLE_H */ diff --git a/include/asm-m68k/movs.h b/include/asm-m68k/movs.h deleted file mode 100644 index 67dbea36960..00000000000 --- a/include/asm-m68k/movs.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef __MOVS_H__ -#define __MOVS_H__ - -/* -** movs.h -** -** Inline assembly macros to generate movs & related instructions -*/ - -/* Set DFC register value */ - -#define SET_DFC(x) \ - __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x)); - -/* Get DFC register value */ - -#define GET_DFC(x) \ - __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : ); - -/* Set SFC register value */ - -#define SET_SFC(x) \ - __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x)); - -/* Get SFC register value */ - -#define GET_SFC(x) \ - __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : ); - -#define SET_VBR(x) \ - __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x)); - -#define GET_VBR(x) \ - __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : ); - -/* Set a byte using the "movs" instruction */ - -#define SET_CONTROL_BYTE(addr,value) \ - __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr)); - -/* Get a byte using the "movs" instruction */ - -#define GET_CONTROL_BYTE(addr,value) \ - __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr)); - -/* Set a (long)word using the "movs" instruction */ - -#define SET_CONTROL_WORD(addr,value) \ - __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr)); - -/* Get a (long)word using the "movs" instruction */ - -#define GET_CONTROL_WORD(addr,value) \ - __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr)); -#endif diff --git a/include/asm-m68k/msgbuf.h b/include/asm-m68k/msgbuf.h deleted file mode 100644 index 243cb798de8..00000000000 --- a/include/asm-m68k/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_MSGBUF_H -#define _M68K_MSGBUF_H - -/* - * The msqid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _M68K_MSGBUF_H */ diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-m68k/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-m68k/mvme147hw.h b/include/asm-m68k/mvme147hw.h deleted file mode 100644 index b8104310847..00000000000 --- a/include/asm-m68k/mvme147hw.h +++ /dev/null @@ -1,113 +0,0 @@ -#ifndef _MVME147HW_H_ -#define _MVME147HW_H_ - -#include - -typedef struct { - unsigned char - ctrl, - bcd_sec, - bcd_min, - bcd_hr, - bcd_dow, - bcd_dom, - bcd_mth, - bcd_year; -} MK48T02; - -#define RTC_WRITE 0x80 -#define RTC_READ 0x40 -#define RTC_STOP 0x20 - -#define m147_rtc ((MK48T02 * volatile)0xfffe07f8) - - -struct pcc_regs { - volatile u_long dma_tadr; - volatile u_long dma_dadr; - volatile u_long dma_bcr; - volatile u_long dma_hr; - volatile u_short t1_preload; - volatile u_short t1_count; - volatile u_short t2_preload; - volatile u_short t2_count; - volatile u_char t1_int_cntrl; - volatile u_char t1_cntrl; - volatile u_char t2_int_cntrl; - volatile u_char t2_cntrl; - volatile u_char ac_fail; - volatile u_char watchdog; - volatile u_char lpt_intr; - volatile u_char lpt_cntrl; - volatile u_char dma_intr; - volatile u_char dma_cntrl; - volatile u_char bus_error; - volatile u_char dma_status; - volatile u_char abort; - volatile u_char ta_fnctl; - volatile u_char serial_cntrl; - volatile u_char general_cntrl; - volatile u_char lan_cntrl; - volatile u_char general_status; - volatile u_char scsi_interrupt; - volatile u_char slave; - volatile u_char soft1_cntrl; - volatile u_char int_base; - volatile u_char soft2_cntrl; - volatile u_char revision_level; - volatile u_char lpt_data; - volatile u_char lpt_status; - }; - -#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000) - - -#define PCC_INT_ENAB 0x08 - -#define PCC_TIMER_INT_CLR 0x80 -#define PCC_TIMER_PRELOAD 63936l - -#define PCC_LEVEL_ABORT 0x07 -#define PCC_LEVEL_SERIAL 0x04 -#define PCC_LEVEL_ETH 0x04 -#define PCC_LEVEL_TIMER1 0x04 -#define PCC_LEVEL_SCSI_PORT 0x04 -#define PCC_LEVEL_SCSI_DMA 0x04 - -#define PCC_IRQ_AC_FAIL (IRQ_USER+0) -#define PCC_IRQ_BERR (IRQ_USER+1) -#define PCC_IRQ_ABORT (IRQ_USER+2) -/* #define PCC_IRQ_SERIAL (IRQ_USER+3) */ -#define PCC_IRQ_PRINTER (IRQ_USER+7) -#define PCC_IRQ_TIMER1 (IRQ_USER+8) -#define PCC_IRQ_TIMER2 (IRQ_USER+9) -#define PCC_IRQ_SOFTWARE1 (IRQ_USER+10) -#define PCC_IRQ_SOFTWARE2 (IRQ_USER+11) - - -#define M147_SCC_A_ADDR 0xfffe3002 -#define M147_SCC_B_ADDR 0xfffe3000 -#define M147_SCC_PCLK 5000000 - -#define MVME147_IRQ_SCSI_PORT (IRQ_USER+0x45) -#define MVME147_IRQ_SCSI_DMA (IRQ_USER+0x46) - -/* SCC interrupts, for MVME147 */ - -#define MVME147_IRQ_TYPE_PRIO 0 -#define MVME147_IRQ_SCC_BASE (IRQ_USER+32) -#define MVME147_IRQ_SCCB_TX (IRQ_USER+32) -#define MVME147_IRQ_SCCB_STAT (IRQ_USER+34) -#define MVME147_IRQ_SCCB_RX (IRQ_USER+36) -#define MVME147_IRQ_SCCB_SPCOND (IRQ_USER+38) -#define MVME147_IRQ_SCCA_TX (IRQ_USER+40) -#define MVME147_IRQ_SCCA_STAT (IRQ_USER+42) -#define MVME147_IRQ_SCCA_RX (IRQ_USER+44) -#define MVME147_IRQ_SCCA_SPCOND (IRQ_USER+46) - -#define MVME147_LANCE_BASE 0xfffe1800 -#define MVME147_LANCE_IRQ (IRQ_USER+4) - -#define ETHERNET_ADDRESS 0xfffe0778 - -#endif diff --git a/include/asm-m68k/mvme16xhw.h b/include/asm-m68k/mvme16xhw.h deleted file mode 100644 index 6117f56653d..00000000000 --- a/include/asm-m68k/mvme16xhw.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _M68K_MVME16xHW_H_ -#define _M68K_MVME16xHW_H_ - -#include - -/* Board ID data structure - pointer to this retrieved from Bug by head.S */ - -/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */ - -extern long mvme_bdid_ptr; - -typedef struct { - char bdid[4]; - u_char rev, mth, day, yr; - u_short size, reserved; - u_short brdno; - char brdsuffix[2]; - u_long options; - u_short clun, dlun, ctype, dnum; - u_long option2; -} t_bdid, *p_bdid; - - -typedef struct { - u_char ack_icr, - flt_icr, - sel_icr, - pe_icr, - bsy_icr, - spare1, - isr, - cr, - spare2, - spare3, - spare4, - data; -} MVMElp, *MVMElpPtr; - -#define MVME_LPR_BASE 0xfff42030 - -#define mvmelp ((*(volatile MVMElpPtr)(MVME_LPR_BASE))) - -typedef struct { - unsigned char - ctrl, - bcd_sec, - bcd_min, - bcd_hr, - bcd_dow, - bcd_dom, - bcd_mth, - bcd_year; -} MK48T08_t, *MK48T08ptr_t; - -#define RTC_WRITE 0x80 -#define RTC_READ 0x40 -#define RTC_STOP 0x20 - -#define MVME_RTC_BASE 0xfffc1ff8 - -#define MVME_I596_BASE 0xfff46000 - -#define MVME_SCC_A_ADDR 0xfff45005 -#define MVME_SCC_B_ADDR 0xfff45001 -#define MVME_SCC_PCLK 10000000 - -#define MVME162_IRQ_TYPE_PRIO 0 - -#define MVME167_IRQ_PRN (IRQ_USER+20) -#define MVME16x_IRQ_I596 (IRQ_USER+23) -#define MVME16x_IRQ_SCSI (IRQ_USER+21) -#define MVME16x_IRQ_FLY (IRQ_USER+63) -#define MVME167_IRQ_SER_ERR (IRQ_USER+28) -#define MVME167_IRQ_SER_MODEM (IRQ_USER+29) -#define MVME167_IRQ_SER_TX (IRQ_USER+30) -#define MVME167_IRQ_SER_RX (IRQ_USER+31) -#define MVME16x_IRQ_TIMER (IRQ_USER+25) -#define MVME167_IRQ_ABORT (IRQ_USER+46) -#define MVME162_IRQ_ABORT (IRQ_USER+30) - -/* SCC interrupts, for MVME162 */ -#define MVME162_IRQ_SCC_BASE (IRQ_USER+0) -#define MVME162_IRQ_SCCB_TX (IRQ_USER+0) -#define MVME162_IRQ_SCCB_STAT (IRQ_USER+2) -#define MVME162_IRQ_SCCB_RX (IRQ_USER+4) -#define MVME162_IRQ_SCCB_SPCOND (IRQ_USER+6) -#define MVME162_IRQ_SCCA_TX (IRQ_USER+8) -#define MVME162_IRQ_SCCA_STAT (IRQ_USER+10) -#define MVME162_IRQ_SCCA_RX (IRQ_USER+12) -#define MVME162_IRQ_SCCA_SPCOND (IRQ_USER+14) - -/* MVME162 version register */ - -#define MVME162_VERSION_REG 0xfff4202e - -extern unsigned short mvme16x_config; - -/* Lower 8 bits must match the revision register in the MC2 chip */ - -#define MVME16x_CONFIG_SPEED_32 0x0001 -#define MVME16x_CONFIG_NO_VMECHIP2 0x0002 -#define MVME16x_CONFIG_NO_SCSICHIP 0x0004 -#define MVME16x_CONFIG_NO_ETHERNET 0x0008 -#define MVME16x_CONFIG_GOT_FPU 0x0010 - -#define MVME16x_CONFIG_GOT_LP 0x0100 -#define MVME16x_CONFIG_GOT_CD2401 0x0200 -#define MVME16x_CONFIG_GOT_SCCA 0x0400 -#define MVME16x_CONFIG_GOT_SCCB 0x0800 - -#endif diff --git a/include/asm-m68k/nubus.h b/include/asm-m68k/nubus.h deleted file mode 100644 index d6be9976f1a..00000000000 --- a/include/asm-m68k/nubus.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _ASM_M68K_NUBUS_H -#define _ASM_M68K_NUBUS_H - -#include - -#define nubus_readb raw_inb -#define nubus_readw raw_inw -#define nubus_readl raw_inl - -#define nubus_writeb raw_outb -#define nubus_writew raw_outw -#define nubus_writel raw_outl - -#define nubus_memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define nubus_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define nubus_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -static inline void *nubus_remap_nocache_ser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void *nubus_remap_nocache_nonser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); -} - -static inline void *nbus_remap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} - -static inline void *nubus_remap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define nubus_unmap iounmap -#define nubus_iounmap iounmap -#define nubus_ioremap nubus_remap_nocache_ser - -#endif /* _ASM_NUBUS_H */ diff --git a/include/asm-m68k/openprom.h b/include/asm-m68k/openprom.h deleted file mode 100644 index d33cdadf78e..00000000000 --- a/include/asm-m68k/openprom.h +++ /dev/null @@ -1,312 +0,0 @@ -#ifndef __SPARC_OPENPROM_H -#define __SPARC_OPENPROM_H - -/* openprom.h: Prom structures and defines for access to the OPENBOOT - * prom routines and data areas. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - - -/* Empirical constants... */ -#ifdef CONFIG_SUN3 -#define KADB_DEBUGGER_BEGVM 0x0fee0000 /* There is no kadb yet but...*/ -#define LINUX_OPPROM_BEGVM 0x0fef0000 -#define LINUX_OPPROM_ENDVM 0x0ff10000 /* I think this is right - tm */ -#else -#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ -#define LINUX_OPPROM_BEGVM 0xffd00000 -#define LINUX_OPPROM_ENDVM 0xfff00000 -#define LINUX_OPPROM_MAGIC 0x10010407 -#endif - -#ifndef __ASSEMBLY__ -/* V0 prom device operations. */ -struct linux_dev_v0_funcs { - int (*v0_devopen)(char *device_str); - int (*v0_devclose)(int dev_desc); - int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_seekdev)(int dev_desc, long logical_offst, int from); -}; - -/* V2 and later prom device operations. */ -struct linux_dev_v2_funcs { - int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ - char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); - void (*v2_dumb_mem_free)(char *va, unsigned sz); - - /* To map devices into virtual I/O space. */ - char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); - void (*v2_dumb_munmap)(char *virta, unsigned size); - - int (*v2_dev_open)(char *devpath); - void (*v2_dev_close)(int d); - int (*v2_dev_read)(int d, char *buf, int nbytes); - int (*v2_dev_write)(int d, char *buf, int nbytes); - int (*v2_dev_seek)(int d, int hi, int lo); - - /* Never issued (multistage load support) */ - void (*v2_wheee2)(void); - void (*v2_wheee3)(void); -}; - -struct linux_mlist_v0 { - struct linux_mlist_v0 *theres_more; - char *start_adr; - unsigned num_bytes; -}; - -struct linux_mem_v0 { - struct linux_mlist_v0 **v0_totphys; - struct linux_mlist_v0 **v0_prommap; - struct linux_mlist_v0 **v0_available; /* What we can use */ -}; - -/* Arguments sent to the kernel from the boot prompt. */ -struct linux_arguments_v0 { - char *argv[8]; - char args[100]; - char boot_dev[2]; - int boot_dev_ctrl; - int boot_dev_unit; - int dev_partition; - char *kernel_file_name; - void *aieee1; /* XXX */ -}; - -/* V2 and up boot things. */ -struct linux_bootargs_v2 { - char **bootpath; - char **bootargs; - int *fd_stdin; - int *fd_stdout; -}; - -#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -struct linux_romvec { - char *pv_initsp; - int (*pv_startmon)(void); - - int *diagberr; - - struct linux_arguments_v0 **pv_v0bootargs; - unsigned *pv_sun3mem; - - unsigned char (*pv_getchar)(void); - int (*pv_putchar)(int ch); - int (*pv_nbgetchar)(void); - int (*pv_nbputchar)(int ch); - unsigned char *pv_echo; - unsigned char *pv_insource; - unsigned char *pv_outsink; - - int (*pv_getkey)(void); - int (*pv_initgetkey)(void); - unsigned int *pv_translation; - unsigned char *pv_keybid; - int *pv_screen_x; - int *pv_screen_y; - struct keybuf *pv_keybuf; - - char *pv_monid; - - /* - * Frame buffer output and terminal emulation - */ - - int (*pv_fbwritechar)(char); - int *pv_fbaddr; - char **pv_font; - int (*pv_fbwritestr)(char); - - void (*pv_reboot)(char *bootstr); - - /* - * Line input and parsing - */ - - unsigned char *pv_linebuf; - unsigned char **pv_lineptr; - int *pv_linesize; - int (*pv_getline)(void); - unsigned char (*pv_getnextchar)(void); - unsigned char (*pv_peeknextchar)(void); - int *pv_fbthere; - int (*pv_getnum)(void); - - void (*pv_printf)(const char *fmt, ...); - int (*pv_printhex)(void); - - unsigned char *pv_leds; - int (*pv_setleds)(void); - - /* - * Non-maskable interrupt (nmi) information - */ - - int (*pv_nmiaddr)(void); - int (*pv_abortentry)(void); - int *pv_nmiclock; - - int *pv_fbtype; - - /* - * Assorted other things - */ - - unsigned pv_romvers; - struct globram *pv_globram; - char *pv_kbdzscc; - - int *pv_keyrinit; - unsigned char *pv_keyrtick; - unsigned *pv_memoryavail; - long *pv_resetaddr; - long *pv_resetmap; - - void (*pv_halt)(void); - unsigned char *pv_memorybitmap; - -#ifdef CONFIG_SUN3 - void (*pv_setctxt)(int ctxt, char *va, int pmeg); - void (*pv_vector_cmd)(void); - int dummy1z; - int dummy2z; - int dummy3z; - int dummy4z; -#endif -}; -#else -/* The top level PROM vector. */ -struct linux_romvec { - /* Version numbers. */ - unsigned int pv_magic_cookie; - unsigned int pv_romvers; - unsigned int pv_plugin_revision; - unsigned int pv_printrev; - - /* Version 0 memory descriptors. */ - struct linux_mem_v0 pv_v0mem; - - /* Node operations. */ - struct linux_nodeops *pv_nodeops; - - char **pv_bootstr; - struct linux_dev_v0_funcs pv_v0devops; - - char *pv_stdin; - char *pv_stdout; -#define PROMDEV_KBD 0 /* input from keyboard */ -#define PROMDEV_SCREEN 0 /* output to screen */ -#define PROMDEV_TTYA 1 /* in/out to ttya */ -#define PROMDEV_TTYB 2 /* in/out to ttyb */ - - /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ - int (*pv_getchar)(void); - void (*pv_putchar)(int ch); - - /* Non-blocking variants. */ - int (*pv_nbgetchar)(void); - int (*pv_nbputchar)(int ch); - - void (*pv_putstr)(char *str, int len); - - /* Miscellany. */ - void (*pv_reboot)(char *bootstr); - void (*pv_printf)(__const__ char *fmt, ...); - void (*pv_abort)(void); - __volatile__ int *pv_ticks; - void (*pv_halt)(void); - void (**pv_synchook)(void); - - /* Evaluate a forth string, not different proto for V0 and V2->up. */ - union { - void (*v0_eval)(int len, char *str); - void (*v2_eval)(char *str); - } pv_fortheval; - - struct linux_arguments_v0 **pv_v0bootargs; - - /* Get ether address. */ - unsigned int (*pv_enaddr)(int d, char *enaddr); - - struct linux_bootargs_v2 pv_v2bootargs; - struct linux_dev_v2_funcs pv_v2devops; - - int filler[15]; - - /* This one is sun4c/sun4 only. */ - void (*pv_setctxt)(int ctxt, char *va, int pmeg); - - /* Prom version 3 Multiprocessor routines. This stuff is crazy. - * No joke. Calling these when there is only one cpu probably - * crashes the machine, have to test this. :-) - */ - - /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context - * 'thiscontext' executing at address 'prog_counter' - */ - int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, - int thiscontext, char *prog_counter); - - /* v3_cpustop() will cause cpu 'whichcpu' to stop executing - * until a resume cpu call is made. - */ - int (*v3_cpustop)(unsigned int whichcpu); - - /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or - * resume cpu call is made. - */ - int (*v3_cpuidle)(unsigned int whichcpu); - - /* v3_cpuresume() will resume processor 'whichcpu' executing - * starting with whatever 'pc' and 'npc' were left at the - * last 'idle' or 'stop' call. - */ - int (*v3_cpuresume)(unsigned int whichcpu); -}; -#endif - -/* Routines for traversing the prom device tree. */ -struct linux_nodeops { - int (*no_nextnode)(int node); - int (*no_child)(int node); - int (*no_proplen)(int node, char *name); - int (*no_getprop)(int node, char *name, char *val); - int (*no_setprop)(int node, char *name, char *val, int len); - char * (*no_nextprop)(int node, char *name); -}; - -/* More fun PROM structures for device probing. */ -#define PROMREG_MAX 16 -#define PROMVADDR_MAX 16 -#define PROMINTR_MAX 15 - -struct linux_prom_registers { - int which_io; /* is this in OBIO space? */ - char *phys_addr; /* The physical address of this register */ - int reg_size; /* How many bytes does this register take up? */ -}; - -struct linux_prom_irqs { - int pri; /* IRQ priority */ - int vector; /* This is foobar, what does it do? */ -}; - -/* Element of the "ranges" vector */ -struct linux_prom_ranges { - unsigned int ot_child_space; - unsigned int ot_child_base; /* Bus feels this */ - unsigned int ot_parent_space; - unsigned int ot_parent_base; /* CPU looks from here */ - unsigned int or_size; -}; - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/include/asm-m68k/oplib.h b/include/asm-m68k/oplib.h deleted file mode 100644 index f082d03336b..00000000000 --- a/include/asm-m68k/oplib.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * oplib.h: Describes the interface and available routines in the - * Linux Prom library. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __SPARC_OPLIB_H -#define __SPARC_OPLIB_H - -#include - -/* The master romvec pointer... */ -extern struct linux_romvec *romvec; - -/* Enumeration to describe the prom major version we have detected. */ -enum prom_major_version { - PROM_V0, /* Original sun4c V0 prom */ - PROM_V2, /* sun4c and early sun4m V2 prom */ - PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ - PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ -}; - -extern enum prom_major_version prom_vers; -/* Revision, and firmware revision. */ -extern unsigned int prom_rev, prom_prev; - -/* Root node of the prom device tree, this stays constant after - * initialization is complete. - */ -extern int prom_root_node; - -/* Pointer to prom structure containing the device tree traversal - * and usage utility functions. Only prom-lib should use these, - * users use the interface defined by the library only! - */ -extern struct linux_nodeops *prom_nodeops; - -/* The functions... */ - -/* You must call prom_init() before using any of the library services, - * preferably as early as possible. Pass it the romvec pointer. - */ -extern void prom_init(struct linux_romvec *rom_ptr); - -/* Boot argument acquisition, returns the boot command line string. */ -extern char *prom_getbootargs(void); - -/* Device utilities. */ - -/* Map and unmap devices in IO space at virtual addresses. Note that the - * virtual address you pass is a request and the prom may put your mappings - * somewhere else, so check your return value as that is where your new - * mappings really are! - * - * Another note, these are only available on V2 or higher proms! - */ -extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); -extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - -/* Machine memory configuration routine. */ - -/* This function returns a V0 format memory descriptor table, it has three - * entries. One for the total amount of physical ram on the machine, one - * for the amount of physical ram available, and one describing the virtual - * areas which are allocated by the prom. So, in a sense the physical - * available is a calculation of the total physical minus the physical mapped - * by the prom with virtual mappings. - * - * These lists are returned pre-sorted, this should make your life easier - * since the prom itself is way too lazy to do such nice things. - */ -extern struct linux_mem_v0 *prom_meminfo(void); - -/* Miscellaneous routines, don't really fit in any category per se. */ - -/* Reboot the machine with the command line passed. */ -extern void prom_reboot(char *boot_command); - -/* Evaluate the forth string passed. */ -extern void prom_feval(char *forth_string); - -/* Enter the prom, with possibility of continuation with the 'go' - * command in newer proms. - */ -extern void prom_cmdline(void); - -/* Enter the prom, with no chance of continuation for the stand-alone - * which calls this. - */ -extern void prom_halt(void); - -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX - */ -typedef void (*sync_func_t)(void); -extern void prom_setsync(sync_func_t func_ptr); - -/* Acquire the IDPROM of the root node in the prom device tree. This - * gets passed a buffer where you would like it stuffed. The return value - * is the format type of this idprom or 0xff on error. - */ -extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); - -/* Get the prom major version. */ -extern int prom_version(void); - -/* Get the prom plugin revision. */ -extern int prom_getrev(void); - -/* Get the prom firmware revision. */ -extern int prom_getprev(void); - -/* Character operations to/from the console.... */ - -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - -/* Blocking get character from console. */ -extern char prom_getchar(void); - -/* Blocking put character to console. */ -extern void prom_putchar(char character); - -/* Prom's internal printf routine, don't use in kernel/boot code. */ -void prom_printf(char *fmt, ...); - -/* Query for input device type */ - -enum prom_input_device { - PROMDEV_IKBD, /* input from keyboard */ - PROMDEV_ITTYA, /* input from ttya */ - PROMDEV_ITTYB, /* input from ttyb */ - PROMDEV_I_UNK, -}; - -extern enum prom_input_device prom_query_input_device(void); - -/* Query for output device type */ - -enum prom_output_device { - PROMDEV_OSCREEN, /* to screen */ - PROMDEV_OTTYA, /* to ttya */ - PROMDEV_OTTYB, /* to ttyb */ - PROMDEV_O_UNK, -}; - -extern enum prom_output_device prom_query_output_device(void); - -/* Multiprocessor operations... */ - -/* Start the CPU with the given device tree node, context table, and context - * at the passed program counter. - */ -extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, - int context, char *program_counter); - -/* Stop the CPU with the passed device tree node. */ -extern int prom_stopcpu(int cpunode); - -/* Idle the CPU with the passed device tree node. */ -extern int prom_idlecpu(int cpunode); - -/* Re-Start the CPU with the passed device tree node. */ -extern int prom_restartcpu(int cpunode); - -/* PROM memory allocation facilities... */ - -/* Allocated at possibly the given virtual address a chunk of the - * indicated size. - */ -extern char *prom_alloc(char *virt_hint, unsigned int size); - -/* Free a previously allocated chunk. */ -extern void prom_free(char *virt_addr, unsigned int size); - -/* Sun4/sun4c specific memory-management startup hook. */ - -/* Map the passed segment in the given context at the passed - * virtual address. - */ -extern void prom_putsegment(int context, unsigned long virt_addr, - int physical_segment); - -/* PROM device tree traversal functions... */ - -/* Get the child node of the given node, or zero if no child exists. */ -extern int prom_getchild(int parent_node); - -/* Get the next sibling node of the given node, or zero if no further - * siblings exist. - */ -extern int prom_getsibling(int node); - -/* Get the length, at the passed node, of the given property type. - * Returns -1 on error (ie. no such property at this node). - */ -extern int prom_getproplen(int thisnode, char *property); - -/* Fetch the requested property using the given buffer. Returns - * the number of bytes the prom put into your buffer or -1 on error. - */ -extern int prom_getproperty(int thisnode, char *property, - char *prop_buffer, int propbuf_size); - -/* Acquire an integer property. */ -extern int prom_getint(int node, char *property); - -/* Acquire an integer property, with a default value. */ -extern int prom_getintdefault(int node, char *property, int defval); - -/* Acquire a boolean property, 0=FALSE 1=TRUE. */ -extern int prom_getbool(int node, char *prop); - -/* Acquire a string property, null string on error. */ -extern void prom_getstring(int node, char *prop, char *buf, int bufsize); - -/* Does the passed node have the given "name"? YES=1 NO=0 */ -extern int prom_nodematch(int thisnode, char *name); - -/* Search all siblings starting at the passed node for "name" matching - * the given string. Returns the node on success, zero on failure. - */ -extern int prom_searchsiblings(int node_start, char *name); - -/* Return the first property type, as a string, for the given node. - * Returns a null string on error. - */ -extern char *prom_firstprop(int node); - -/* Returns the next property after the passed property for the given - * node. Returns null string on failure. - */ -extern char *prom_nextprop(int node, char *prev_property); - -/* Returns 1 if the specified node has given property. */ -extern int prom_node_has_property(int node, char *property); - -/* Set the indicated property at the given node with the passed value. - * Returns the number of bytes of your value that the prom took. - */ -extern int prom_setprop(int node, char *prop_name, char *prop_value, - int value_size); - -extern int prom_pathtoinode(char *path); -extern int prom_inst2pkg(int); - -/* Dorking with Bus ranges... */ - -/* Adjust reg values with the passed ranges. */ -extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs, - struct linux_prom_ranges *rangep, int nranges); - -/* Adjust child ranges with the passed parent ranges. */ -extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges, - struct linux_prom_ranges *pranges, int npranges); - -/* Apply promlib probed OBIO ranges to registers. */ -extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); - -/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ -extern void prom_apply_generic_ranges(int node, int parent, - struct linux_prom_registers *sbusregs, int nregs); - - -#endif /* !(__SPARC_OPLIB_H) */ diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h deleted file mode 100644 index a34b8bad784..00000000000 --- a/include/asm-m68k/page.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef _M68K_PAGE_H -#define _M68K_PAGE_H - -#include - -/* PAGE_SHIFT determines the page size */ -#ifndef CONFIG_SUN3 -#define PAGE_SHIFT (12) -#else -#define PAGE_SHIFT (13) -#endif -#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include - -#if PAGE_SHIFT < 13 -#define THREAD_SIZE (8192) -#else -#define THREAD_SIZE PAGE_SIZE -#endif - -#ifndef __ASSEMBLY__ - -#include - -#include - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -/* - * We don't need to check for alignment etc. - */ -#ifdef CPU_M68040_OR_M68060_ONLY -static inline void copy_page(void *to, void *from) -{ - unsigned long tmp; - - __asm__ __volatile__("1:\t" - ".chip 68040\n\t" - "move16 %1@+,%0@+\n\t" - "move16 %1@+,%0@+\n\t" - ".chip 68k\n\t" - "dbra %2,1b\n\t" - : "=a" (to), "=a" (from), "=d" (tmp) - : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1) - ); -} - -static inline void clear_page(void *page) -{ - unsigned long tmp; - unsigned long *sp = page; - - *sp++ = 0; - *sp++ = 0; - *sp++ = 0; - *sp++ = 0; - - __asm__ __volatile__("1:\t" - ".chip 68040\n\t" - "move16 %2@+,%0@+\n\t" - ".chip 68k\n\t" - "subqw #8,%2\n\t" - "subqw #8,%2\n\t" - "dbra %1,1b\n\t" - : "=a" (sp), "=d" (tmp) - : "a" (page), "0" (sp), - "1" ((PAGE_SIZE - 16) / 16 - 1)); -} - -#else -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) -#endif - -#define clear_user_page(addr, vaddr, page) \ - do { clear_page(addr); \ - flush_dcache_page(page); \ - } while (0) -#define copy_user_page(to, from, vaddr, page) \ - do { copy_page(to, from); \ - flush_dcache_page(page); \ - } while (0) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#endif /* !__ASSEMBLY__ */ - -#include - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -extern unsigned long m68k_memoffset; - -#ifndef CONFIG_SUN3 - -#define WANT_PAGE_VIRTUAL - -static inline unsigned long ___pa(void *vaddr) -{ - unsigned long paddr; - asm ( - "1: addl #0,%0\n" - m68k_fixup(%c2, 1b+2) - : "=r" (paddr) - : "0" (vaddr), "i" (m68k_fixup_memoffset)); - return paddr; -} -#define __pa(vaddr) ___pa((void *)(vaddr)) -static inline void *__va(unsigned long paddr) -{ - void *vaddr; - asm ( - "1: subl #0,%0\n" - m68k_fixup(%c2, 1b+2) - : "=r" (vaddr) - : "0" (paddr), "i" (m68k_fixup_memoffset)); - return vaddr; -} - -#else /* !CONFIG_SUN3 */ -/* This #define is a horrible hack to suppress lots of warnings. --m */ -#define __pa(x) ___pa((unsigned long)(x)) -static inline unsigned long ___pa(unsigned long x) -{ - if(x == 0) - return 0; - if(x >= PAGE_OFFSET) - return (x-PAGE_OFFSET); - else - return (x+0x2000000); -} - -static inline void *__va(unsigned long x) -{ - if(x == 0) - return (void *)0; - - if(x < 0x2000000) - return (void *)(x+PAGE_OFFSET); - else - return (void *)(x-0x2000000); -} -#endif /* CONFIG_SUN3 */ - -/* - * NOTE: virtual isn't really correct, actually it should be the offset into the - * memory node, but we have no highmem, so that works for now. - * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots - * of the shifts unnecessary. - */ -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) - -extern int m68k_virt_to_node_shift; - -#ifdef CONFIG_SINGLE_MEMORY_CHUNK -#define __virt_to_node(addr) (&pg_data_map[0]) -#else -extern struct pglist_data *pg_data_table[]; - -static inline __attribute_const__ int __virt_to_node_shift(void) -{ - int shift; - - asm ( - "1: moveq #0,%0\n" - m68k_fixup(%c1, 1b) - : "=d" (shift) - : "i" (m68k_fixup_vnode_shift)); - return shift; -} - -#define __virt_to_node(addr) (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()]) -#endif - -#define virt_to_page(addr) ({ \ - pfn_to_page(virt_to_pfn(addr)); \ -}) -#define page_to_virt(page) ({ \ - pfn_to_virt(page_to_pfn(page)); \ -}) - -#define pfn_to_page(pfn) ({ \ - unsigned long __pfn = (pfn); \ - struct pglist_data *pgdat; \ - pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn)); \ - pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \ -}) -#define page_to_pfn(_page) ({ \ - struct page *__p = (_page); \ - struct pglist_data *pgdat; \ - pgdat = &pg_data_map[page_to_nid(__p)]; \ - ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \ -}) - -#define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory) -#define pfn_valid(pfn) virt_addr_valid(pfn_to_virt(pfn)) - -#endif /* __ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include - -#endif /* _M68K_PAGE_H */ diff --git a/include/asm-m68k/page_offset.h b/include/asm-m68k/page_offset.h deleted file mode 100644 index 1cbdb7f30ac..00000000000 --- a/include/asm-m68k/page_offset.h +++ /dev/null @@ -1,8 +0,0 @@ - -/* This handles the memory map.. */ -#ifndef CONFIG_SUN3 -#define PAGE_OFFSET_RAW 0x00000000 -#else -#define PAGE_OFFSET_RAW 0x0E000000 -#endif - diff --git a/include/asm-m68k/param.h b/include/asm-m68k/param.h deleted file mode 100644 index 536a2788835..00000000000 --- a/include/asm-m68k/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_PARAM_H -#define _M68K_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 8192 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _M68K_PARAM_H */ diff --git a/include/asm-m68k/parport.h b/include/asm-m68k/parport.h deleted file mode 100644 index 646b1872f73..00000000000 --- a/include/asm-m68k/parport.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - * - * RZ: for use with Q40 and other ISA machines - */ - -#ifndef _ASM_M68K_PARPORT_H -#define _ASM_M68K_PARPORT_H 1 - -#define insl(port,buf,len) isa_insb(port,buf,(len)<<2) -#define outsl(port,buf,len) isa_outsb(port,buf,(len)<<2) - -/* no dma, or IRQ autoprobing */ -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - if (! (MACH_IS_Q40)) - return 0; /* count=0 */ - return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE); -} - -#endif /* !(_ASM_M68K_PARPORT_H) */ diff --git a/include/asm-m68k/pci.h b/include/asm-m68k/pci.h deleted file mode 100644 index 4ad0aea48ab..00000000000 --- a/include/asm-m68k/pci.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_M68K_PCI_H -#define _ASM_M68K_PCI_H - -#include - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#endif /* _ASM_M68K_PCI_H */ diff --git a/include/asm-m68k/percpu.h b/include/asm-m68k/percpu.h deleted file mode 100644 index 0859d048faf..00000000000 --- a/include/asm-m68k/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/include/asm-m68k/pgalloc.h b/include/asm-m68k/pgalloc.h deleted file mode 100644 index 4cb1a57ab76..00000000000 --- a/include/asm-m68k/pgalloc.h +++ /dev/null @@ -1,19 +0,0 @@ - -#ifndef M68K_PGALLOC_H -#define M68K_PGALLOC_H - -#include -#include -#include -#include - - -#ifdef CONFIG_SUN3 -#include -#else -#include -#endif - -extern void m68k_setup_node(int node); - -#endif /* M68K_PGALLOC_H */ diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h deleted file mode 100644 index 0b604f0f192..00000000000 --- a/include/asm-m68k/pgtable.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _M68K_PGTABLE_H -#define _M68K_PGTABLE_H - -#include - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include - -/* - * This file contains the functions and defines necessary to modify and use - * the m68k page table tree. - */ - -#include - -/* Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) \ - do{ \ - *(pteptr) = (pteval); \ - } while(0) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#ifdef CONFIG_SUN3 -#define PMD_SHIFT 17 -#else -#define PMD_SHIFT 22 -#endif -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#ifdef CONFIG_SUN3 -#define PGDIR_SHIFT 17 -#else -#define PGDIR_SHIFT 25 -#endif -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: the m68k is configured as three-level, - * so we do have PMD level physically. - */ -#ifdef CONFIG_SUN3 -#define PTRS_PER_PTE 16 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 -#else -#define PTRS_PER_PTE 1024 -#define PTRS_PER_PMD 8 -#define PTRS_PER_PGD 128 -#endif -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -/* Virtual address region for use by kernel_map() */ -#ifdef CONFIG_SUN3 -#define KMAP_START 0x0DC00000 -#define KMAP_END 0x0E000000 -#else -#define KMAP_START 0xd0000000 -#define KMAP_END 0xf0000000 -#endif - -#ifndef CONFIG_SUN3 -/* Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_OFFSET (8*1024*1024) -#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END KMAP_START -#else -extern unsigned long vmalloc_end; -#define VMALLOC_START 0x0f800000 -#define VMALLOC_END vmalloc_end -#endif /* CONFIG_SUN3 */ - -/* zero page used for uninitialized stuff */ -extern void *empty_zero_page; - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -/* number of bits that fit into a memory pointer */ -#define BITS_PER_PTR (8*sizeof(unsigned long)) - -/* to align the pointer to a pointer address */ -#define PTR_MASK (~(sizeof(void*)-1)) - -/* sizeof(void*)==1< -#else -#include -#endif - -#ifndef __ASSEMBLY__ -#include - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#ifdef SUN3_PAGE_NOCACHE -# define __SUN3_PAGE_NOCACHE SUN3_PAGE_NOCACHE -#else -# define __SUN3_PAGE_NOCACHE 0 -#endif -#define pgprot_noncached(prot) \ - (MMU_IS_SUN3 \ - ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE)) \ - : ((MMU_IS_851 || MMU_IS_030) \ - ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030)) \ - : (MMU_IS_040 || MMU_IS_060) \ - ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ - : (prot))) - -#endif /* !__ASSEMBLY__ */ - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#define check_pgt_cache() do { } while (0) - -#endif /* _M68K_PGTABLE_H */ diff --git a/include/asm-m68k/poll.h b/include/asm-m68k/poll.h deleted file mode 100644 index f080fcdb61b..00000000000 --- a/include/asm-m68k/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __m68k_POLL_H -#define __m68k_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include - -#endif diff --git a/include/asm-m68k/posix_types.h b/include/asm-m68k/posix_types.h deleted file mode 100644 index 63cdcc142d9..00000000000 --- a/include/asm-m68k/posix_types.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __ARCH_M68K_POSIX_TYPES_H -#define __ARCH_M68K_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) - -#undef __FD_CLR -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) - -#undef __FD_ISSET -#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) - -#undef __FD_ZERO -#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) - -#endif /* defined(__KERNEL__) */ - -#endif diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h deleted file mode 100644 index 1f61ef53f0e..00000000000 --- a/include/asm-m68k/processor.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-m68k/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include -#include -#include -#include - -static inline unsigned long rdusp(void) -{ - unsigned long usp; - - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -} - -static inline void wrusp(unsigned long usp) -{ - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#ifndef CONFIG_SUN3 -#define TASK_SIZE (0xF0000000UL) -#else -#define TASK_SIZE (0x0E000000UL) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#ifndef CONFIG_SUN3 -#define TASK_UNMAPPED_BASE 0xC0000000UL -#else -#define TASK_UNMAPPED_BASE 0x0A000000UL -#endif -#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long faddr; /* info about last fault */ - int signo, code; - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct thread_info info; -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ - .info = INIT_THREAD_INFO(init_task), \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long usp) -{ - /* reads from user space */ - set_fs(USER_DS); - - regs->pc = pc; - regs->sr &= ~0x2000; - wrusp(usp); -} - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h deleted file mode 100644 index 57e763d79bf..00000000000 --- a/include/asm-m68k/ptrace.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef _M68K_PTRACE_H -#define _M68K_PTRACE_H - -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 - -#ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#ifdef __KERNEL__ - -#ifndef PS_S -#define PS_S (0x2000) -#define PS_M (0x1000) -#endif - -#define user_mode(regs) (!((regs)->sr & PS_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _M68K_PTRACE_H */ diff --git a/include/asm-m68k/q40_master.h b/include/asm-m68k/q40_master.h deleted file mode 100644 index 3907a09d4fc..00000000000 --- a/include/asm-m68k/q40_master.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Q40 master Chip Control - * RTC stuff merged for compactnes.. -*/ - -#ifndef _Q40_MASTER_H -#define _Q40_MASTER_H - -#include - - -#define q40_master_addr 0xff000000 - -#define IIRQ_REG 0x0 /* internal IRQ reg */ -#define EIRQ_REG 0x4 /* external ... */ -#define KEYCODE_REG 0x1c /* value of received scancode */ -#define DISPLAY_CONTROL_REG 0x18 -#define FRAME_CLEAR_REG 0x24 -#define LED_REG 0x30 - -#define Q40_LED_ON() master_outb(1,LED_REG) -#define Q40_LED_OFF() master_outb(0,LED_REG) - -#define INTERRUPT_REG IIRQ_REG /* "native" ints */ -#define KEY_IRQ_ENABLE_REG 0x08 /**/ -#define KEYBOARD_UNLOCK_REG 0x20 /* clear kb int */ - -#define SAMPLE_ENABLE_REG 0x14 /* generate SAMPLE ints */ -#define SAMPLE_RATE_REG 0x2c -#define SAMPLE_CLEAR_REG 0x28 -#define SAMPLE_LOW 0x00 -#define SAMPLE_HIGH 0x01 - -#define FRAME_RATE_REG 0x38 /* generate FRAME ints at 200 HZ rate */ - -#if 0 -#define SER_ENABLE_REG 0x0c /* allow serial ints to be generated */ -#endif -#define EXT_ENABLE_REG 0x10 /* ... rest of the ISA ints ... */ - - -#define master_inb(_reg_) in_8((unsigned char *)q40_master_addr+_reg_) -#define master_outb(_b_,_reg_) out_8((unsigned char *)q40_master_addr+_reg_,_b_) - -/* RTC defines */ - -#define Q40_RTC_BASE (0xff021ffc) - -#define Q40_RTC_YEAR (*(volatile unsigned char *)(Q40_RTC_BASE+0)) -#define Q40_RTC_MNTH (*(volatile unsigned char *)(Q40_RTC_BASE-4)) -#define Q40_RTC_DATE (*(volatile unsigned char *)(Q40_RTC_BASE-8)) -#define Q40_RTC_DOW (*(volatile unsigned char *)(Q40_RTC_BASE-12)) -#define Q40_RTC_HOUR (*(volatile unsigned char *)(Q40_RTC_BASE-16)) -#define Q40_RTC_MINS (*(volatile unsigned char *)(Q40_RTC_BASE-20)) -#define Q40_RTC_SECS (*(volatile unsigned char *)(Q40_RTC_BASE-24)) -#define Q40_RTC_CTRL (*(volatile unsigned char *)(Q40_RTC_BASE-28)) - -/* some control bits */ -#define Q40_RTC_READ 64 /* prepare for reading */ -#define Q40_RTC_WRITE 128 - -/* define some Q40 specific ints */ -#include "q40ints.h" - -/* misc defs */ -#define DAC_LEFT ((unsigned char *)0xff008000) -#define DAC_RIGHT ((unsigned char *)0xff008004) - -#endif /* _Q40_MASTER_H */ diff --git a/include/asm-m68k/q40ints.h b/include/asm-m68k/q40ints.h deleted file mode 100644 index 3d970afb708..00000000000 --- a/include/asm-m68k/q40ints.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * contains some Q40 related interrupt definitions - */ - -#define Q40_IRQ_MAX (34) - -#define Q40_IRQ_SAMPLE (34) -#define Q40_IRQ_KEYBOARD (32) -#define Q40_IRQ_FRAME (33) - - -/* masks for interrupt regiosters*/ -/* internal, IIRQ_REG */ -#define Q40_IRQ_KEYB_MASK (2) -#define Q40_IRQ_SER_MASK (1<<2) -#define Q40_IRQ_FRAME_MASK (1<<3) -#define Q40_IRQ_EXT_MASK (1<<4) /* is a EIRQ */ -/* eirq, EIRQ_REG */ -#define Q40_IRQ3_MASK (1) -#define Q40_IRQ4_MASK (1<<1) -#define Q40_IRQ5_MASK (1<<2) -#define Q40_IRQ6_MASK (1<<3) -#define Q40_IRQ7_MASK (1<<4) -#define Q40_IRQ10_MASK (1<<5) -#define Q40_IRQ14_MASK (1<<6) -#define Q40_IRQ15_MASK (1<<7) - -extern unsigned long q40_probe_irq_on (void); -extern int q40_probe_irq_off (unsigned long irqs); diff --git a/include/asm-m68k/raw_io.h b/include/asm-m68k/raw_io.h deleted file mode 100644 index d9eb9834ccc..00000000000 --- a/include/asm-m68k/raw_io.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/include/asm-m68k/raw_io.h - * - * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace - * - */ - -#ifndef _RAW_IO_H -#define _RAW_IO_H - -#ifdef __KERNEL__ - -#include - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void iounmap(void __iomem *addr); - -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, - int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - - -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesirable for some devices. - */ -#define in_8(addr) \ - ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; }) -#define in_be16(addr) \ - ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; }) -#define in_be32(addr) \ - ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; }) -#define in_le16(addr) \ - ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; }) -#define in_le32(addr) \ - ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; }) - -#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b)) -#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w)) -#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l)) -#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w)) -#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l)) - -#define raw_inb in_8 -#define raw_inw in_be16 -#define raw_inl in_be32 -#define __raw_readb in_8 -#define __raw_readw in_be16 -#define __raw_readl in_be32 - -#define raw_outb(val,port) out_8((port),(val)) -#define raw_outw(val,port) out_be16((port),(val)) -#define raw_outl(val,port) out_be32((port),(val)) -#define __raw_writeb(val,addr) out_8((addr),(val)) -#define __raw_writew(val,addr) out_be16((addr),(val)) -#define __raw_writel(val,addr) out_be32((addr),(val)) - -static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) -{ - unsigned int i; - - for (i = 0; i < len; i++) - *buf++ = in_8(port); -} - -static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf, - unsigned int len) -{ - unsigned int i; - - for (i = 0; i < len; i++) - out_8(port, *buf++); -} - -static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movew %2@,%0@+; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "movew %2@,%0@+; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf, - unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movew %0@+,%2@; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "movew %0@+,%2@; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movel %2@,%0@+; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "movel %2@,%0@+; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - -static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf, - unsigned int nr) -{ - unsigned int tmp; - - if (nr & 15) { - tmp = (nr & 15) - 1; - asm volatile ( - "1: movel %0@+,%2@; dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } - if (nr >> 4) { - tmp = (nr >> 4) - 1; - asm volatile ( - "1: " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "movel %0@+,%2@; " - "dbra %1,1b" - : "=a" (buf), "=d" (tmp) - : "a" (port), "0" (buf), - "1" (tmp)); - } -} - - -static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf, - unsigned int nr) -{ - if ((nr) % 8) - __asm__ __volatile__ - ("\tmovel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); - else - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "lsrl #3,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "movew %/a0@,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a1@+\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); -} - -static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, - unsigned int nr) -{ - if ((nr) % 8) - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); - else - __asm__ __volatile__ - ("movel %0,%/a0\n\t" - "movel %1,%/a1\n\t" - "movel %2,%/d6\n\t" - "lsrl #3,%/d6\n\t" - "subql #1,%/d6\n" - "1:\tmovew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "movew %/a1@+,%/d0\n\t" - "rolw #8,%/d0\n\t" - "movew %/d0,%/a0@\n\t" - "dbra %/d6,1b" - : - : "g" (port), "g" (buf), "g" (nr) - : "d0", "a0", "a1", "d6"); -} - -#endif /* __KERNEL__ */ - -#endif /* _RAW_IO_H */ diff --git a/include/asm-m68k/resource.h b/include/asm-m68k/resource.h deleted file mode 100644 index e7d35019f33..00000000000 --- a/include/asm-m68k/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include - -#endif /* _M68K_RESOURCE_H */ diff --git a/include/asm-m68k/rtc.h b/include/asm-m68k/rtc.h deleted file mode 100644 index 5d3e0385984..00000000000 --- a/include/asm-m68k/rtc.h +++ /dev/null @@ -1,76 +0,0 @@ -/* include/asm-m68k/rtc.h - * - * Copyright Richard Zidlicky - * implementation details for genrtc/q40rtc driver - */ -/* permission is hereby granted to copy, modify and redistribute this code - * in terms of the GNU Library General Public License, Version 2 or later, - * at your option. - */ - -#ifndef _ASM_RTC_H -#define _ASM_RTC_H - -#ifdef __KERNEL__ - -#include -#include -#include - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - mach_hwclk(0, time); - return RTC_24H; -} - -static inline int set_rtc_time(struct rtc_time *time) -{ - return mach_hwclk(1, time); -} - -static inline unsigned int get_rtc_ss(void) -{ - if (mach_get_ss) - return mach_get_ss(); - else{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; - } -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - if (mach_get_rtc_pll) - return mach_get_rtc_pll(pll); - else - return -EINVAL; -} -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - if (mach_set_rtc_pll) - return mach_set_rtc_pll(pll); - else - return -EINVAL; -} -#endif /* __KERNEL__ */ - -#endif /* _ASM__RTC_H */ diff --git a/include/asm-m68k/sbus.h b/include/asm-m68k/sbus.h deleted file mode 100644 index bfe3ba147f2..00000000000 --- a/include/asm-m68k/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif diff --git a/include/asm-m68k/scatterlist.h b/include/asm-m68k/scatterlist.h deleted file mode 100644 index d3a7a0edfec..00000000000 --- a/include/asm-m68k/scatterlist.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - __u32 dma_address; /* A place to hang host-specific addresses at. */ -}; - -/* This is bogus and should go away. */ -#define ISA_DMA_THRESHOLD (0x00ffffff) - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/include/asm-m68k/sections.h b/include/asm-m68k/sections.h deleted file mode 100644 index d64967ecfec..00000000000 --- a/include/asm-m68k/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include - -#endif /* _ASM_M68K_SECTIONS_H */ diff --git a/include/asm-m68k/segment.h b/include/asm-m68k/segment.h deleted file mode 100644 index 7b0b2d3127f..00000000000 --- a/include/asm-m68k/segment.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ - -static inline mm_segment_t get_fs(void) -{ - mm_segment_t _v; - __asm__ ("movec %/dfc,%0":"=r" (_v.seg):); - - return _v; -} - -static inline mm_segment_t get_ds(void) -{ - /* return the supervisor data space code */ - return KERNEL_DS; -} - -static inline void set_fs(mm_segment_t val) -{ - __asm__ __volatile__ ("movec %0,%/sfc\n\t" - "movec %0,%/dfc\n\t" - : /* no outputs */ : "r" (val.seg) : "memory"); -} - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/include/asm-m68k/sembuf.h b/include/asm-m68k/sembuf.h deleted file mode 100644 index 2308052a8c2..00000000000 --- a/include/asm-m68k/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _M68K_SEMBUF_H -#define _M68K_SEMBUF_H - -/* - * The semid64_ds structure for m68k architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _M68K_SEMBUF_H */ diff --git a/include/asm-m68k/serial.h b/include/asm-m68k/serial.h deleted file mode 100644 index 2b90d6e6907..00000000000 --- a/include/asm-m68k/serial.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-m68k/serial.h - * - * currently this seems useful only for a Q40, - * it's an almost exact copy of ../asm-alpha/serial.h - * - */ - - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/include/asm-m68k/setup.h b/include/asm-m68k/setup.h deleted file mode 100644 index 4dfb3952b37..00000000000 --- a/include/asm-m68k/setup.h +++ /dev/null @@ -1,376 +0,0 @@ -/* -** asm/setup.h -- Definition of the Linux/m68k setup information -** -** Copyright 1992 by Greg Harp -** -** This file is subject to the terms and conditions of the GNU General Public -** License. See the file COPYING in the main directory of this archive -** for more details. -** -** Created 09/29/92 by Greg Harp -** -** 5/2/94 Roman Hodek: -** Added bi_atari part of the machine dependent union bi_un; for now it -** contains just a model field to distinguish between TT and Falcon. -** 26/7/96 Roman Zippel: -** Renamed to setup.h; added some useful macros to allow gcc some -** optimizations if possible. -** 5/10/96 Geert Uytterhoeven: -** Redesign of the boot information structure; moved boot information -** structure to bootinfo.h -*/ - -#ifndef _M68K_SETUP_H -#define _M68K_SETUP_H - - - - /* - * Linux/m68k Architectures - */ - -#define MACH_AMIGA 1 -#define MACH_ATARI 2 -#define MACH_MAC 3 -#define MACH_APOLLO 4 -#define MACH_SUN3 5 -#define MACH_MVME147 6 -#define MACH_MVME16x 7 -#define MACH_BVME6000 8 -#define MACH_HP300 9 -#define MACH_Q40 10 -#define MACH_SUN3X 11 - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -#define CL_SIZE COMMAND_LINE_SIZE - -#ifndef __ASSEMBLY__ -extern unsigned long m68k_machtype; -#endif /* !__ASSEMBLY__ */ - -#if !defined(CONFIG_AMIGA) -# define MACH_IS_AMIGA (0) -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA) -#else -# define MACH_AMIGA_ONLY -# define MACH_IS_AMIGA (1) -# define MACH_TYPE (MACH_AMIGA) -#endif - -#if !defined(CONFIG_ATARI) -# define MACH_IS_ATARI (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI) -#else -# define MACH_ATARI_ONLY -# define MACH_IS_ATARI (1) -# define MACH_TYPE (MACH_ATARI) -#endif - -#if !defined(CONFIG_MAC) -# define MACH_IS_MAC (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_MAC (m68k_machtype == MACH_MAC) -#else -# define MACH_MAC_ONLY -# define MACH_IS_MAC (1) -# define MACH_TYPE (MACH_MAC) -#endif - -#if defined(CONFIG_SUN3) -#define MACH_IS_SUN3 (1) -#define MACH_SUN3_ONLY (1) -#define MACH_TYPE (MACH_SUN3) -#else -#define MACH_IS_SUN3 (0) -#endif - -#if !defined (CONFIG_APOLLO) -# define MACH_IS_APOLLO (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO) -#else -# define MACH_APOLLO_ONLY -# define MACH_IS_APOLLO (1) -# define MACH_TYPE (MACH_APOLLO) -#endif - -#if !defined (CONFIG_MVME147) -# define MACH_IS_MVME147 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) -# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147) -#else -# define MACH_MVME147_ONLY -# define MACH_IS_MVME147 (1) -# define MACH_TYPE (MACH_MVME147) -#endif - -#if !defined (CONFIG_MVME16x) -# define MACH_IS_MVME16x (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x) -#else -# define MACH_MVME16x_ONLY -# define MACH_IS_MVME16x (1) -# define MACH_TYPE (MACH_MVME16x) -#endif - -#if !defined (CONFIG_BVME6000) -# define MACH_IS_BVME6000 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000) -#else -# define MACH_BVME6000_ONLY -# define MACH_IS_BVME6000 (1) -# define MACH_TYPE (MACH_BVME6000) -#endif - -#if !defined (CONFIG_HP300) -# define MACH_IS_HP300 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_HP300 (m68k_machtype == MACH_HP300) -#else -# define MACH_HP300_ONLY -# define MACH_IS_HP300 (1) -# define MACH_TYPE (MACH_HP300) -#endif - -#if !defined (CONFIG_Q40) -# define MACH_IS_Q40 (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) -# define MACH_IS_Q40 (m68k_machtype == MACH_Q40) -#else -# define MACH_Q40_ONLY -# define MACH_IS_Q40 (1) -# define MACH_TYPE (MACH_Q40) -#endif - -#if !defined (CONFIG_SUN3X) -# define MACH_IS_SUN3X (0) -#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ - || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ - || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_Q40) || defined(CONFIG_MVME147) -# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X) -#else -# define CONFIG_SUN3X_ONLY -# define MACH_IS_SUN3X (1) -# define MACH_TYPE (MACH_SUN3X) -#endif - -#ifndef MACH_TYPE -# define MACH_TYPE (m68k_machtype) -#endif - -#endif /* __KERNEL__ */ - - - /* - * CPU, FPU and MMU types - * - * Note: we may rely on the following equalities: - * - * CPU_68020 == MMU_68851 - * CPU_68030 == MMU_68030 - * CPU_68040 == FPU_68040 == MMU_68040 - * CPU_68060 == FPU_68060 == MMU_68060 - */ - -#define CPUB_68020 0 -#define CPUB_68030 1 -#define CPUB_68040 2 -#define CPUB_68060 3 - -#define CPU_68020 (1< - -typedef struct siginfo { - int si_signo; - int si_errno; - int si_code; - - union { - int _pad[SI_PAD_SIZE]; - - /* kill() */ - struct { - __kernel_pid_t _pid; /* sender's pid */ - __kernel_uid_t _uid; /* backwards compatibility */ - __kernel_uid32_t _uid32; /* sender's uid */ - } _kill; - - /* POSIX.1b timers */ - struct { - timer_t _tid; /* timer id */ - int _overrun; /* overrun count */ - char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; - sigval_t _sigval; /* same as below */ - int _sys_private; /* not to be passed to user */ - } _timer; - - /* POSIX.1b signals */ - struct { - __kernel_pid_t _pid; /* sender's pid */ - __kernel_uid_t _uid; /* backwards compatibility */ - sigval_t _sigval; - __kernel_uid32_t _uid32; /* sender's uid */ - } _rt; - - /* SIGCHLD */ - struct { - __kernel_pid_t _pid; /* which child */ - __kernel_uid_t _uid; /* backwards compatibility */ - int _status; /* exit code */ - clock_t _utime; - clock_t _stime; - __kernel_uid32_t _uid32; /* sender's uid */ - } _sigchld; - - /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ - struct { - void *_addr; /* faulting insn/memory ref. */ - } _sigfault; - - /* SIGPOLL */ - struct { - int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ - int _fd; - } _sigpoll; - } _sifields; -} siginfo_t; - -#define UID16_SIGINFO_COMPAT_NEEDED - -/* - * How these fields are to be accessed. - */ -#undef si_uid -#ifdef __KERNEL__ -#define si_uid _sifields._kill._uid32 -#define si_uid16 _sifields._kill._uid -#else -#define si_uid _sifields._kill._uid -#endif - -#ifdef __KERNEL__ - -#include - -static inline void copy_siginfo(struct siginfo *to, struct siginfo *from) -{ - if (from->si_code < 0) - memcpy(to, from, sizeof(*to)); - else - /* _sigchld is currently the largest know union member */ - memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld)); -} - -#endif /* __KERNEL__ */ - -#endif diff --git a/include/asm-m68k/signal.h b/include/asm-m68k/signal.h deleted file mode 100644 index 3db8a81942f..00000000000 --- a/include/asm-m68k/signal.h +++ /dev/null @@ -1,206 +0,0 @@ -#ifndef _M68K_SIGNAL_H -#define _M68K_SIGNAL_H - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#define __HAVE_ARCH_SIG_BITOPS - -static inline void sigaddset(sigset_t *set, int _sig) -{ - asm ("bfset %0{%1,#1}" - : "+od" (*set) - : "id" ((_sig - 1) ^ 31) - : "cc"); -} - -static inline void sigdelset(sigset_t *set, int _sig) -{ - asm ("bfclr %0{%1,#1}" - : "+od" (*set) - : "id" ((_sig - 1) ^ 31) - : "cc"); -} - -static inline int __const_sigismember(sigset_t *set, int _sig) -{ - unsigned long sig = _sig - 1; - return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW)); -} - -static inline int __gen_sigismember(sigset_t *set, int _sig) -{ - int ret; - asm ("bfextu %1{%2,#1},%0" - : "=d" (ret) - : "od" (*set), "id" ((_sig-1) ^ 31) - : "cc"); - return ret; -} - -#define sigismember(set,sig) \ - (__builtin_constant_p(sig) ? \ - __const_sigismember(set,sig) : \ - __gen_sigismember(set,sig)) - -static inline int sigfindinword(unsigned long word) -{ - asm ("bfffo %1{#0,#0},%0" - : "=d" (word) - : "d" (word & -word) - : "cc"); - return word ^ 31; -} - -struct pt_regs; -extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SIGNAL_H */ diff --git a/include/asm-m68k/socket.h b/include/asm-m68k/socket.h deleted file mode 100644 index dbc64e92c41..00000000000 --- a/include/asm-m68k/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-m68k/sockios.h b/include/asm-m68k/sockios.h deleted file mode 100644 index c04a23943cb..00000000000 --- a/include/asm-m68k/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_M68K_SOCKIOS__ -#define __ARCH_M68K_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __ARCH_M68K_SOCKIOS__ */ diff --git a/include/asm-m68k/spinlock.h b/include/asm-m68k/spinlock.h deleted file mode 100644 index 20f46e27b53..00000000000 --- a/include/asm-m68k/spinlock.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_SPINLOCK_H -#define __M68K_SPINLOCK_H - -#error "m68k doesn't do SMP yet" - -#endif diff --git a/include/asm-m68k/stat.h b/include/asm-m68k/stat.h deleted file mode 100644 index dd38bc2e9f9..00000000000 --- a/include/asm-m68k/stat.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68K_STAT_H -#define _M68K_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long __unused1; - unsigned long st_mtime; - unsigned long __unused2; - unsigned long st_ctime; - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad1[2]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[2]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#endif /* _M68K_STAT_H */ diff --git a/include/asm-m68k/statfs.h b/include/asm-m68k/statfs.h deleted file mode 100644 index 08d93f14e06..00000000000 --- a/include/asm-m68k/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include - -#endif /* _M68K_STATFS_H */ diff --git a/include/asm-m68k/string.h b/include/asm-m68k/string.h deleted file mode 100644 index 2eb7df1e0f5..00000000000 --- a/include/asm-m68k/string.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef _M68K_STRING_H_ -#define _M68K_STRING_H_ - -#include -#include - -static inline size_t __kernel_strlen(const char *s) -{ - const char *sc; - - for (sc = s; *sc++; ) - ; - return sc - s - 1; -} - -static inline char *__kernel_strcpy(char *dest, const char *src) -{ - char *xdest = dest; - - asm volatile ("\n" - "1: move.b (%1)+,(%0)+\n" - " jne 1b" - : "+a" (dest), "+a" (src) - : : "memory"); - return xdest; -} - -#ifndef __IN_STRING_C - -#define __HAVE_ARCH_STRLEN -#define strlen(s) (__builtin_constant_p(s) ? \ - __builtin_strlen(s) : \ - __kernel_strlen(s)) - -#define __HAVE_ARCH_STRNLEN -static inline size_t strnlen(const char *s, size_t count) -{ - const char *sc = s; - - asm volatile ("\n" - "1: subq.l #1,%1\n" - " jcs 2f\n" - " tst.b (%0)+\n" - " jne 1b\n" - " subq.l #1,%0\n" - "2:" - : "+a" (sc), "+d" (count)); - return sc - s; -} - -#define __HAVE_ARCH_STRCPY -#if __GNUC__ >= 4 -#define strcpy(d, s) (__builtin_constant_p(s) && \ - __builtin_strlen(s) <= 32 ? \ - __builtin_strcpy(d, s) : \ - __kernel_strcpy(d, s)) -#else -#define strcpy(d, s) __kernel_strcpy(d, s) -#endif - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - - asm volatile ("\n" - " jra 2f\n" - "1: move.b (%1),(%0)+\n" - " jeq 2f\n" - " addq.l #1,%1\n" - "2: subq.l #1,%2\n" - " jcc 1b\n" - : "+a" (dest), "+a" (src), "+d" (n) - : : "memory"); - return xdest; -} - -#define __HAVE_ARCH_STRCAT -#define strcat(d, s) ({ \ - char *__d = (d); \ - strcpy(__d + strlen(__d), (s)); \ -}) - -#define __HAVE_ARCH_STRCHR -static inline char *strchr(const char *s, int c) -{ - char sc, ch = c; - - for (; (sc = *s++) != ch; ) { - if (!sc) - return NULL; - } - return (char *)s - 1; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *cs, const char *ct) -{ - char res; - - asm ("\n" - "1: move.b (%0)+,%2\n" /* get *cs */ - " cmp.b (%1)+,%2\n" /* compare a byte */ - " jne 2f\n" /* not equal, break out */ - " tst.b %2\n" /* at end of cs? */ - " jne 1b\n" /* no, keep going */ - " jra 3f\n" /* strings are equal */ - "2: sub.b -(%1),%2\n" /* *cs - *ct */ - "3:" - : "+a" (cs), "+a" (ct), "=d" (res)); - return res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *, int, __kernel_size_t); -#define memset(d, c, n) __builtin_memset(d, c, n) - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *, const void *, __kernel_size_t); -#define memcpy(d, s, n) __builtin_memcpy(d, s, n) - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *, const void *, __kernel_size_t); - -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *, const void *, __kernel_size_t); -#define memcmp(d, s, n) __builtin_memcmp(d, s, n) - -#endif - -#endif /* _M68K_STRING_H_ */ diff --git a/include/asm-m68k/sun3-head.h b/include/asm-m68k/sun3-head.h deleted file mode 100644 index 05af2f18b3b..00000000000 --- a/include/asm-m68k/sun3-head.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __SUN3_HEAD_H -#define __SUN3_HEAD_H - -#define KERNBASE 0xE000000 /* First address the kernel will eventually be */ -#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ -#define FC_CONTROL 3 -#define FC_SUPERD 5 -#define FC_CPU 7 - -#endif /* __SUN3_HEAD_H */ diff --git a/include/asm-m68k/sun3_pgalloc.h b/include/asm-m68k/sun3_pgalloc.h deleted file mode 100644 index d4c83f14381..00000000000 --- a/include/asm-m68k/sun3_pgalloc.h +++ /dev/null @@ -1,102 +0,0 @@ -/* sun3_pgalloc.h -- - * reorganization around 2.3.39, routines moved from sun3_pgtable.h - * - * - * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam) - * - * moved 1/26/2000 Sam Creasey - */ - -#ifndef _SUN3_PGALLOC_H -#define _SUN3_PGALLOC_H - -#include - -/* FIXME - when we get this compiling */ -/* erm, now that it's compiling, what do we do with it? */ -#define _KERNPG_TABLE 0 - -extern const char bad_pmd_string[]; - -#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) - - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long) pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t page) -{ - pgtable_page_dtor(page); - __free_page(page); -} - -#define __pte_free_tlb(tlb,pte) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb), pte); \ -} while (0) - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT); - - if (!page) - return NULL; - - memset((void *)page, 0, PAGE_SIZE); - return (pte_t *) (page); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0); - - if (page == NULL) - return NULL; - - clear_highpage(page); - pgtable_page_ctor(page); - return page; - -} - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) -{ - pmd_val(*pmd) = __pa((unsigned long)pte); -} - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page) -{ - pmd_val(*pmd) = __pa((unsigned long)page_address(page)); -} -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb, x) do { } while (0) - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - free_page((unsigned long) pgd); -} - -static inline pgd_t * pgd_alloc(struct mm_struct *mm) -{ - pgd_t *new_pgd; - - new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL); - memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE); - memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT)); - return new_pgd; -} - -#define pgd_populate(mm, pmd, pte) BUG() - -#endif /* SUN3_PGALLOC_H */ diff --git a/include/asm-m68k/sun3_pgtable.h b/include/asm-m68k/sun3_pgtable.h deleted file mode 100644 index f847ec732d6..00000000000 --- a/include/asm-m68k/sun3_pgtable.h +++ /dev/null @@ -1,234 +0,0 @@ -#ifndef _SUN3_PGTABLE_H -#define _SUN3_PGTABLE_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include - -/* - * This file contains all the things which change drastically for the sun3 - * pagetable stuff, to avoid making too much of a mess of the generic m68k - * `pgtable.h'; this should only be included from the generic file. --m - */ - -/* For virtual address to physical address conversion */ -#define VTOP(addr) __pa(addr) -#define PTOV(addr) __va(addr) - - -#endif /* !__ASSEMBLY__ */ - -/* These need to be defined for compatibility although the sun3 doesn't use them */ -#define _PAGE_NOCACHE030 0x040 -#define _CACHEMASK040 (~0x060) -#define _PAGE_NOCACHE_S 0x040 - -/* Page protection values within PTE. */ -#define SUN3_PAGE_VALID (0x80000000) -#define SUN3_PAGE_WRITEABLE (0x40000000) -#define SUN3_PAGE_SYSTEM (0x20000000) -#define SUN3_PAGE_NOCACHE (0x10000000) -#define SUN3_PAGE_ACCESSED (0x02000000) -#define SUN3_PAGE_MODIFIED (0x01000000) - - -/* Externally used page protection values. */ -#define _PAGE_PRESENT (SUN3_PAGE_VALID) -#define _PAGE_ACCESSED (SUN3_PAGE_ACCESSED) - -#define PTE_FILE_MAX_BITS 28 - -/* Compound page protection values. */ -//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix... -// is it just PAGE_KERNEL and PAGE_SHARED? -#define PAGE_NONE __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_SHARED __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_COPY __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_READONLY __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_NOCACHE) -#define PAGE_KERNEL __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_SYSTEM \ - | SUN3_PAGE_NOCACHE \ - | SUN3_PAGE_ACCESSED \ - | SUN3_PAGE_MODIFIED) -#define PAGE_INIT __pgprot(SUN3_PAGE_VALID \ - | SUN3_PAGE_WRITEABLE \ - | SUN3_PAGE_SYSTEM \ - | SUN3_PAGE_NOCACHE) - -/* - * Page protections for initialising protection_map. The sun3 has only two - * protection settings, valid (implying read and execute) and writeable. These - * are as close as we can get... - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED - -/* Use these fake page-protections on PMDs. */ -#define SUN3_PMD_VALID (0x00000001) -#define SUN3_PMD_MASK (0x0000003F) -#define SUN3_PMD_MAGIC (0x0000002B) - -#ifndef __ASSEMBLY__ - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -#define pmd_set(pmdp,ptep) do {} while (0) - -static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp) -{ - pgd_val(*pgdp) = virt_to_phys(pmdp); -} - -#define __pte_page(pte) \ -((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT)) -#define __pmd_page(pmd) \ -((unsigned long) __va (pmd_val (pmd) & PAGE_MASK)) - -static inline int pte_none (pte_t pte) { return !pte_val (pte); } -static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; } -static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_val (*ptep) = 0; -} - -#define pte_pfn(pte) (pte_val(pte) & SUN3_PAGE_PGNUM_MASK) -#define pfn_pte(pfn, pgprot) \ -({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; }) - -#define pte_page(pte) virt_to_page(__pte_page(pte)) -#define pmd_page(pmd) virt_to_page(__pmd_page(pmd)) - - -static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); } -#define pmd_none(pmd) pmd_none2(&(pmd)) -//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; } -static inline int pmd_bad2 (pmd_t *pmd) { return 0; } -#define pmd_bad(pmd) pmd_bad2(&(pmd)) -static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; } -/* #define pmd_present(pmd) pmd_present2(&(pmd)) */ -#define pmd_present(pmd) (!pmd_none2(&(pmd))) -static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; } - -static inline int pgd_none (pgd_t pgd) { return 0; } -static inline int pgd_bad (pgd_t pgd) { return 0; } -static inline int pgd_present (pgd_t pgd) { return 1; } -static inline void pgd_clear (pgd_t *pgdp) {} - - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not... - * [we have the full set here even if they don't change from m68k] - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & SUN3_PAGE_WRITEABLE; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & SUN3_PAGE_MODIFIED; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & SUN3_PAGE_ACCESSED; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; } -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mknocache(pte_t pte) { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; } -// use this version when caches work... -//static inline pte_t pte_mkcache(pte_t pte) { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; } -// until then, use: -static inline pte_t pte_mkcache(pte_t pte) { return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern pgd_t kernel_pg_dir[PTRS_PER_PGD]; - -/* Find an entry in a pagetable directory. */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -#define pgd_offset(mm, address) \ -((mm)->pgd + pgd_index(address)) - -/* Find an entry in a kernel pagetable directory. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the second-level pagetable. */ -static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address) -{ - return (pmd_t *) pgd; -} - -static inline unsigned long pte_to_pgoff(pte_t pte) -{ - return pte.pte & SUN3_PAGE_PGNUM_MASK; -} - -static inline pte_t pgoff_to_pte(unsigned off) -{ - pte_t pte = { off + SUN3_PAGE_ACCESSED }; - return pte; -} - - -/* Find an entry in the third-level pagetable. */ -#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1)) -#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address)) -/* FIXME: should we bother with kmap() here? */ -#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address)) -#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address) -#define pte_unmap(pte) kunmap(pte) -#define pte_unmap_nested(pte) kunmap(pte) - -/* Macros to (de)construct the fake PTEs representing swap pages. */ -#define __swp_type(x) ((x).val & 0x7F) -#define __swp_offset(x) (((x).val) >> 7) -#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ -#endif /* !_SUN3_PGTABLE_H */ diff --git a/include/asm-m68k/sun3ints.h b/include/asm-m68k/sun3ints.h deleted file mode 100644 index 309d6e6a137..00000000000 --- a/include/asm-m68k/sun3ints.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * sun3ints.h -- Linux/Sun3 interrupt handling code definitions - * - * Erik Verbruggen (erik@bigmama.xtdnet.nl) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef SUN3INTS_H -#define SUN3INTS_H - -#include -#include -#include -#include -#include -#include - -#define SUN3_INT_VECS 192 - -void sun3_enable_irq(unsigned int irq); -void sun3_disable_irq(unsigned int irq); -extern void sun3_init_IRQ (void); -extern void sun3_enable_interrupts (void); -extern void sun3_disable_interrupts (void); -extern volatile unsigned char* sun3_intreg; - -/* master list of VME vectors -- don't fuck with this */ -#define SUN3_VEC_FLOPPY (IRQ_USER+0) -#define SUN3_VEC_VMESCSI0 (IRQ_USER+0) -#define SUN3_VEC_VMESCSI1 (IRQ_USER+1) -#define SUN3_VEC_CG (IRQ_USER+104) - - -#endif /* SUN3INTS_H */ diff --git a/include/asm-m68k/sun3mmu.h b/include/asm-m68k/sun3mmu.h deleted file mode 100644 index d8f17a0d8c9..00000000000 --- a/include/asm-m68k/sun3mmu.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Definitions for Sun3 custom MMU. - */ -#ifndef __SUN3_MMU_H__ -#define __SUN3_MMU_H__ - -#include -#include -#include - -/* MMU characteristics. */ -#define SUN3_SEGMAPS_PER_CONTEXT 2048 -#define SUN3_PMEGS_NUM 256 -#define SUN3_CONTEXTS_NUM 8 - -#define SUN3_PMEG_SIZE_BITS 17 -#define SUN3_PMEG_SIZE (1 << SUN3_PMEG_SIZE_BITS) -#define SUN3_PMEG_MASK (SUN3_PMEG_SIZE - 1) - -#define SUN3_PTE_SIZE_BITS 13 -#define SUN3_PTE_SIZE (1 << SUN3_PTE_SIZE_BITS) -#define SUN3_PTE_MASK (SUN3_PTE_SIZE - 1) - -#define SUN3_CONTROL_MASK (0x0FFFFFFC) -#define SUN3_INVALID_PMEG 255 -#define SUN3_INVALID_CONTEXT 255 - -#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ -#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ -#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ -#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ -#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ -#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ -#define AC_BUS_ERROR 0x60000000 /* 34 Cleared on read, byte. */ -#define AC_SYNC_ERR 0x60000000 /* c fault type */ -#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ -#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ -#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ -#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ -#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ -#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ -#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ -#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ -#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ - -#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \ - | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED) - -/* Bus access type within PTE. */ -#define SUN3_PAGE_TYPE_MASK (0x0c000000) -#define SUN3_PAGE_TYPE_MEMORY (0x00000000) -#define SUN3_PAGE_TYPE_IO (0x04000000) -#define SUN3_PAGE_TYPE_VME16 (0x08000000) -#define SUN3_PAGE_TYPE_VME32 (0x0c000000) - -/* Mask for page number within PTE. */ -#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF) - -/* Bits within bus-error register. */ -#define SUN3_BUSERR_WATCHDOG (0x01) -#define SUN3_BUSERR_unused (0x02) -#define SUN3_BUSERR_FPAENERR (0x04) -#define SUN3_BUSERR_FPABERR (0x08) -#define SUN3_BUSERR_VMEBERR (0x10) -#define SUN3_BUSERR_TIMEOUT (0x20) -#define SUN3_BUSERR_PROTERR (0x40) -#define SUN3_BUSERR_INVALID (0x80) - -#ifndef __ASSEMBLY__ - -/* Read bus error status register (implicitly clearing it). */ -static inline unsigned char sun3_get_buserr(void) -{ - unsigned char sfc, c; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_BYTE (AC_BUS_ERROR, c); - SET_SFC (sfc); - - return c; -} - -/* Read segmap from hardware MMU. */ -static inline unsigned long sun3_get_segmap(unsigned long addr) -{ - register unsigned long entry; - unsigned char c, sfc; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c); - SET_SFC (sfc); - entry = c; - - return entry; -} - -/* Write segmap to hardware MMU. */ -static inline void sun3_put_segmap(unsigned long addr, unsigned long entry) -{ - unsigned char sfc; - - GET_DFC (sfc); - SET_DFC (FC_CONTROL); - SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_DFC (sfc); - - return; -} - -/* Read PTE from hardware MMU. */ -static inline unsigned long sun3_get_pte(unsigned long addr) -{ - register unsigned long entry; - unsigned char sfc; - - GET_SFC (sfc); - SET_SFC (FC_CONTROL); - GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_SFC (sfc); - - return entry; -} - -/* Write PTE to hardware MMU. */ -static inline void sun3_put_pte(unsigned long addr, unsigned long entry) -{ - unsigned char sfc; - - GET_DFC (sfc); - SET_DFC (FC_CONTROL); - SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry); - SET_DFC (sfc); - - return; -} - -/* get current context */ -static inline unsigned char sun3_get_context(void) -{ - unsigned char sfc, c; - - GET_SFC(sfc); - SET_SFC(FC_CONTROL); - GET_CONTROL_BYTE(AC_CONTEXT, c); - SET_SFC(sfc); - - return c; -} - -/* set alternate context */ -static inline void sun3_put_context(unsigned char c) -{ - unsigned char dfc; - GET_DFC(dfc); - SET_DFC(FC_CONTROL); - SET_CONTROL_BYTE(AC_CONTEXT, c); - SET_DFC(dfc); - - return; -} - -extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size, - unsigned long type); - -extern int sun3_map_test(unsigned long addr, char *val); - -#endif /* !__ASSEMBLY__ */ - -#endif /* !__SUN3_MMU_H__ */ diff --git a/include/asm-m68k/sun3x.h b/include/asm-m68k/sun3x.h deleted file mode 100644 index f5691a1ed7c..00000000000 --- a/include/asm-m68k/sun3x.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef SUN3X_H -#define SUN3X_H - -/* hardware addresses */ -#define SUN3X_IOMMU 0x60000000 -#define SUN3X_ENAREG 0x61000000 -#define SUN3X_INTREG 0x61001400 -#define SUN3X_DIAGREG 0x61001800 -#define SUN3X_ZS1 0x62000000 -#define SUN3X_ZS2 0x62002000 -#define SUN3X_LANCE 0x65002000 -#define SUN3X_EEPROM 0x64000000 -#define SUN3X_IDPROM 0x640007d8 -#define SUN3X_VIDEO_BASE 0x50000000 -#define SUN3X_VIDEO_P4ID 0x50300000 -#define SUN3X_ESP_BASE 0x66000000 -#define SUN3X_ESP_DMA 0x66001000 -#define SUN3X_FDC 0x6e000000 -#define SUN3X_FDC_FCR 0x6e000400 -#define SUN3X_FDC_FVR 0x6e000800 - -/* some NVRAM addresses */ -#define SUN3X_EEPROM_CONS (SUN3X_EEPROM + 0x1f) -#define SUN3X_EEPROM_PORTA (SUN3X_EEPROM + 0x58) -#define SUN3X_EEPROM_PORTB (SUN3X_EEPROM + 0x60) - -#endif diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h deleted file mode 100644 index 32c45f84ac6..00000000000 --- a/include/asm-m68k/sun3xflop.h +++ /dev/null @@ -1,263 +0,0 @@ -/* sun3xflop.h: Sun3/80 specific parts of the floppy driver. - * - * Derived partially from asm-sparc/floppy.h, which is: - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net) - */ - -#ifndef __ASM_SUN3X_FLOPPY_H -#define __ASM_SUN3X_FLOPPY_H - -#include -#include -#include -#include -#include - -/* default interrupt vector */ -#define SUN3X_FDC_IRQ 0x40 - -/* some constants */ -#define FCR_TC 0x1 -#define FCR_EJECT 0x2 -#define FCR_MTRON 0x4 -#define FCR_DSEL1 0x8 -#define FCR_DSEL0 0x10 - -/* We don't need no stinkin' I/O port allocation crap. */ -#undef release_region -#undef request_region -#define release_region(X, Y) do { } while(0) -#define request_region(X, Y, Z) (1) - -struct sun3xflop_private { - volatile unsigned char *status_r; - volatile unsigned char *data_r; - volatile unsigned char *fcr_r; - volatile unsigned char *fvr_r; - unsigned char fcr; -} sun3x_fdc; - -/* Super paranoid... */ -#undef HAVE_DISABLE_HLT - -/* Routines unique to each controller type on a Sun. */ -static unsigned char sun3x_82072_fd_inb(int port) -{ - static int once = 0; -// udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to read unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 4: /* FD_STATUS */ - return (*sun3x_fdc.status_r) & ~STATUS_DMA; - case 5: /* FD_DATA */ - return (*sun3x_fdc.data_r); - case 7: /* FD_DIR */ - /* ugly hack, I can't find a way to actually detect the disk */ - if(!once) { - once = 1; - return 0x80; - } - return 0; - }; - panic("sun_82072_fd_inb: How did I get here?"); -} - -static void sun3x_82072_fd_outb(unsigned char value, int port) -{ -// udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to write to unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 2: /* FD_DOR */ - /* Oh geese, 82072 on the Sun has no DOR register, - * so we make do with taunting the FCR. - * - * ASSUMPTIONS: There will only ever be one floppy - * drive attached to a Sun controller - * and it will be at drive zero. - */ - - { - unsigned char fcr = sun3x_fdc.fcr; - - if(value & 0x10) { - fcr |= (FCR_DSEL0 | FCR_MTRON); - } else - fcr &= ~(FCR_DSEL0 | FCR_MTRON); - - - if(fcr != sun3x_fdc.fcr) { - *(sun3x_fdc.fcr_r) = fcr; - sun3x_fdc.fcr = fcr; - } - } - break; - case 5: /* FD_DATA */ - *(sun3x_fdc.data_r) = value; - break; - case 7: /* FD_DCR */ - *(sun3x_fdc.status_r) = value; - break; - case 4: /* FD_STATUS */ - *(sun3x_fdc.status_r) = value; - break; - }; - return; -} - - -asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id) -{ - register unsigned char st; - -#undef TRACE_FLPY_INT -#define NO_FLOPPY_ASSEMBLER - -#ifdef TRACE_FLPY_INT - static int calls=0; - static int bytes=0; - static int dma_wait=0; -#endif - if(!doing_pdma) { - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - -// printk("doing pdma\n");// st %x\n", sun_fdc->status_82072); - -#ifdef TRACE_FLPY_INT - if(!calls) - bytes = virtual_dma_count; -#endif - - { - register int lcount; - register char *lptr; - - for(lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { -/* st=fd_inb(virtual_dma_port+4) & 0x80 ; */ - st = *(sun3x_fdc.status_r); -/* if(st != 0xa0) */ -/* break; */ - - if((st & 0x80) == 0) { - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - return IRQ_HANDLED; - } - - if((st & 0x20) == 0) - break; - - if(virtual_dma_mode) -/* fd_outb(*lptr, virtual_dma_port+5); */ - *(sun3x_fdc.data_r) = *lptr; - else -/* *lptr = fd_inb(virtual_dma_port+5); */ - *lptr = *(sun3x_fdc.data_r); - } - - virtual_dma_count = lcount; - virtual_dma_addr = lptr; -/* st = fd_inb(virtual_dma_port+4); */ - st = *(sun3x_fdc.status_r); - } - -#ifdef TRACE_FLPY_INT - calls++; -#endif -// printk("st=%02x\n", st); - if(st == 0x20) - return IRQ_HANDLED; - if(!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; - doing_pdma = 0; - -#ifdef TRACE_FLPY_INT - printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n", - virtual_dma_count, virtual_dma_residue, calls, bytes, - dma_wait); - calls = 0; - dma_wait=0; -#endif - - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - - -#ifdef TRACE_FLPY_INT - if(!virtual_dma_count) - dma_wait++; -#endif - return IRQ_HANDLED; -} - -static int sun3xflop_request_irq(void) -{ - static int once = 0; - int error; - - if(!once) { - once = 1; - error = request_irq(FLOPPY_IRQ, sun3xflop_hardint, - IRQF_DISABLED, "floppy", NULL); - return ((error == 0) ? 0 : -1); - } else return 0; -} - -static void __init floppy_set_flags(int *ints,int param, int param2); - -static int sun3xflop_init(void) -{ - if(FLOPPY_IRQ < 0x40) - FLOPPY_IRQ = SUN3X_FDC_IRQ; - - sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC; - sun3x_fdc.data_r = (volatile unsigned char *)(SUN3X_FDC+1); - sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR; - sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR; - sun3x_fdc.fcr = 0; - - /* Last minute sanity check... */ - if(*sun3x_fdc.status_r == 0xff) { - return -1; - } - - *sun3x_fdc.fvr_r = FLOPPY_IRQ; - - *sun3x_fdc.fcr_r = FCR_TC; - udelay(10); - *sun3x_fdc.fcr_r = 0; - - /* Success... */ - floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this. - allowed_drive_mask = 0x01; - return (int) SUN3X_FDC; -} - -/* I'm not precisely sure this eject routine works */ -static int sun3x_eject(void) -{ - if(MACH_IS_SUN3X) { - - sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT); - *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; - udelay(10); - sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT); - *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr; - } - - return 0; -} - -#define fd_eject(drive) sun3x_eject() - -#endif /* !(__ASM_SUN3X_FLOPPY_H) */ diff --git a/include/asm-m68k/sun3xprom.h b/include/asm-m68k/sun3xprom.h deleted file mode 100644 index 6735efcf5f6..00000000000 --- a/include/asm-m68k/sun3xprom.h +++ /dev/null @@ -1,43 +0,0 @@ -/* Useful PROM locations */ - -#ifndef SUN3X_PROM_H -#define SUN3X_PROM_H - -extern void (*sun3x_putchar)(int); -extern int (*sun3x_getchar)(void); -extern int (*sun3x_mayget)(void); -extern int (*sun3x_mayput)(int); - -void sun3x_reboot(void); -void sun3x_abort(void); -void sun3x_prom_init(void); -unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size); - -/* interesting hardware locations */ -#define SUN3X_IOMMU 0x60000000 -#define SUN3X_ENAREG 0x61000000 -#define SUN3X_INTREG 0x61001400 -#define SUN3X_DIAGREG 0x61001800 -#define SUN3X_ZS1 0x62000000 -#define SUN3X_ZS2 0x62002000 -#define SUN3X_LANCE 0x65002000 -#define SUN3X_EEPROM 0x64000000 -#define SUN3X_IDPROM 0x640007d8 -#define SUN3X_VIDEO_BASE 0x50400000 -#define SUN3X_VIDEO_REGS 0x50300000 - -/* vector table */ -#define SUN3X_PROM_BASE 0xfefe0000 -#define SUN3X_P_GETCHAR (SUN3X_PROM_BASE + 20) -#define SUN3X_P_PUTCHAR (SUN3X_PROM_BASE + 24) -#define SUN3X_P_MAYGET (SUN3X_PROM_BASE + 28) -#define SUN3X_P_MAYPUT (SUN3X_PROM_BASE + 32) -#define SUN3X_P_REBOOT (SUN3X_PROM_BASE + 96) -#define SUN3X_P_SETLEDS (SUN3X_PROM_BASE + 144) -#define SUN3X_P_ABORT (SUN3X_PROM_BASE + 152) - -/* mapped area */ -#define SUN3X_MAP_START 0xfee00000 -#define SUN3X_MAP_END 0xff000000 - -#endif diff --git a/include/asm-m68k/suspend.h b/include/asm-m68k/suspend.h deleted file mode 100644 index 57b3ddb4d26..00000000000 --- a/include/asm-m68k/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SUSPEND_H -#define _M68K_SUSPEND_H - -/* Dummy include. */ - -#endif /* _M68K_SUSPEND_H */ diff --git a/include/asm-m68k/swab.h b/include/asm-m68k/swab.h deleted file mode 100644 index 7221e306682..00000000000 --- a/include/asm-m68k/swab.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_SWAB_H -#define _M68K_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val)); - return val; -} -#define __arch_swab32 __arch_swab32 - -#endif /* _M68K_SWAB_H */ diff --git a/include/asm-m68k/system.h b/include/asm-m68k/system.h deleted file mode 100644 index dbb6515ffd5..00000000000 --- a/include/asm-m68k/system.h +++ /dev/null @@ -1,218 +0,0 @@ -#ifndef _M68K_SYSTEM_H -#define _M68K_SYSTEM_H - -#include -#include -#include -#include - -#ifdef __KERNEL__ - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1 - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) do { \ - register void *_prev __asm__ ("a0") = (prev); \ - register void *_next __asm__ ("a1") = (next); \ - register void *_last __asm__ ("d1"); \ - __asm__ __volatile__("jbsr resume" \ - : "=a" (_prev), "=a" (_next), "=d" (_last) \ - : "0" (_prev), "1" (_next) \ - : "d0", "d2", "d3", "d4", "d5"); \ - (last) = _last; \ -} while (0) - - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() do { asm volatile ("nop"); barrier(); } while (0) -#define mb() barrier() -#define rmb() barrier() -#define wmb() barrier() -#define read_barrier_depends() ((void)0) -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() ((void)0) - -/* interrupt control.. */ -#if 0 -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#else -#include -#define local_irq_enable() ({ \ - if (MACH_IS_Q40 || !hardirq_count()) \ - asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory"); \ -}) -#endif -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -static inline int irqs_disabled(void) -{ - unsigned long flags; - local_save_flags(flags); - return flags & ~ALLOWINT; -} - -/* For spinlocks etc */ -#define local_irq_save(x) ({ local_save_flags(x); local_irq_disable(); }) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long flags, tmp; - - local_irq_save(flags); - - switch (size) { - case 1: - tmp = *(u8 *)ptr; - *(u8 *)ptr = x; - x = tmp; - break; - case 2: - tmp = *(u16 *)ptr; - *(u16 *)ptr = x; - x = tmp; - break; - case 4: - tmp = *(u32 *)ptr; - *(u32 *)ptr = x; - x = tmp; - break; - default: - BUG(); - } - - local_irq_restore(flags); - return x; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include - -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -/* - * Atomic compare and exchange. Compare OLD with MEM, if identical, - * store NEW in MEM. Return the initial value in MEM. Success is - * indicated by comparing RETURN with OLD. - */ -#ifdef CONFIG_RMW_INSNS -#define __HAVE_ARCH_CMPXCHG 1 - -static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ ("casb %0,%2,%1" - : "=d" (old), "=m" (*(char *)p) - : "d" (new), "0" (old), "m" (*(char *)p)); - break; - case 2: - __asm__ __volatile__ ("casw %0,%2,%1" - : "=d" (old), "=m" (*(short *)p) - : "d" (new), "0" (old), "m" (*(short *)p)); - break; - case 4: - __asm__ __volatile__ ("casl %0,%2,%1" - : "=d" (old), "=m" (*(int *)p) - : "d" (new), "0" (old), "m" (*(int *)p)); - break; - } - return old; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#else - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) - -#ifndef CONFIG_SMP -#include -#endif - -#endif - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_SYSTEM_H */ diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h deleted file mode 100644 index 8c14170996b..00000000000 --- a/include/asm-m68k/termbits.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __ARCH_M68K_TERMBITS_H__ -#define __ARCH_M68K_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ARCH_M68K_TERMBITS_H__ */ diff --git a/include/asm-m68k/termios.h b/include/asm-m68k/termios.h deleted file mode 100644 index 0823032e404..00000000000 --- a/include/asm-m68k/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef _M68K_TERMIOS_H -#define _M68K_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - get_user((termios)->c_line, &(termio)->c_line); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TERMIOS_H */ diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h deleted file mode 100644 index af0fda46e94..00000000000 --- a/include/asm-m68k/thread_info.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_M68K_THREAD_INFO_H -#define _ASM_M68K_THREAD_INFO_H - -#include -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - unsigned long flags; - struct exec_domain *exec_domain; /* execution domain */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - __u32 cpu; /* should always be 0 on m68k */ - struct restart_block restart_block; -}; - -#define PREEMPT_ACTIVE 0x4000000 - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */ -#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT) - -#define init_thread_info (init_task.thread.info) -#define init_stack (init_thread_union.stack) - -#define task_thread_info(tsk) (&(tsk)->thread.info) -#define task_stack_page(tsk) ((tsk)->stack) -#define current_thread_info() task_thread_info(current) - -#define __HAVE_THREAD_FUNCTIONS - -#define setup_thread_stack(p, org) ({ \ - *(struct task_struct **)(p)->stack = (p); \ - task_thread_info(p)->task = (p); \ -}) - -#define end_of_stack(p) ((unsigned long *)(p)->stack + 1) - -/* entry.S relies on these definitions! - * bits 0-7 are tested at every exception exit - * bits 8-15 are also tested at syscall exit - */ -#define TIF_SIGPENDING 6 /* signal pending */ -#define TIF_NEED_RESCHED 7 /* rescheduling necessary */ -#define TIF_DELAYED_TRACE 14 /* single step a syscall */ -#define TIF_SYSCALL_TRACE 15 /* syscall trace active */ -#define TIF_MEMDIE 16 -#define TIF_FREEZE 17 /* thread is freezing for suspend */ - -#endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/include/asm-m68k/timex.h b/include/asm-m68k/timex.h deleted file mode 100644 index b87f2f278f6..00000000000 --- a/include/asm-m68k/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-m68k/timex.h - * - * m68k architecture timex specifications - */ -#ifndef _ASMm68k_TIMEX_H -#define _ASMm68k_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/include/asm-m68k/tlb.h b/include/asm-m68k/tlb.h deleted file mode 100644 index 1785cff7344..00000000000 --- a/include/asm-m68k/tlb.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _M68K_TLB_H -#define _M68K_TLB_H - -/* - * m68k doesn't need any special per-pte or - * per-vma handling.. - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it - * fills up. - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -#endif /* _M68K_TLB_H */ diff --git a/include/asm-m68k/tlbflush.h b/include/asm-m68k/tlbflush.h deleted file mode 100644 index acb6bf21a32..00000000000 --- a/include/asm-m68k/tlbflush.h +++ /dev/null @@ -1,219 +0,0 @@ -#ifndef _M68K_TLBFLUSH_H -#define _M68K_TLBFLUSH_H - - -#ifndef CONFIG_SUN3 - -#include - -static inline void flush_tlb_kernel_page(void *addr) -{ - if (CPU_IS_040_OR_060) { - mm_segment_t old_fs = get_fs(); - set_fs(KERNEL_DS); - __asm__ __volatile__(".chip 68040\n\t" - "pflush (%0)\n\t" - ".chip 68k" - : : "a" (addr)); - set_fs(old_fs); - } else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr)); -} - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - if (CPU_IS_040_OR_060) - __asm__ __volatile__(".chip 68040\n\t" - "pflushan\n\t" - ".chip 68k"); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #0,#4"); -} - -static inline void __flush_tlb040_one(unsigned long addr) -{ - __asm__ __volatile__(".chip 68040\n\t" - "pflush (%0)\n\t" - ".chip 68k" - : : "a" (addr)); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - if (CPU_IS_040_OR_060) - __flush_tlb040_one(addr); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr)); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - if (CPU_IS_040_OR_060) - __asm__ __volatile__(".chip 68040\n\t" - "pflusha\n\t" - ".chip 68k"); - else if (CPU_IS_020_OR_030) - __asm__ __volatile__("pflusha"); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - if (mm == current->active_mm) - __flush_tlb(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - if (vma->vm_mm == current->active_mm) { - mm_segment_t old_fs = get_fs(); - set_fs(USER_DS); - __flush_tlb_one(addr); - set_fs(old_fs); - } -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - if (vma->vm_mm == current->active_mm) - __flush_tlb(); -} - -static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - flush_tlb_all(); -} - -#else - - -/* Reserved PMEGs. */ -extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM]; -extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM]; -extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM]; -extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM]; - -/* Flush all userspace mappings one by one... (why no flush command, - sun?) */ -static inline void flush_tlb_all(void) -{ - unsigned long addr; - unsigned char ctx, oldctx; - - oldctx = sun3_get_context(); - for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) { - for(ctx = 0; ctx < 8; ctx++) { - sun3_put_context(ctx); - sun3_put_segmap(addr, SUN3_INVALID_PMEG); - } - } - - sun3_put_context(oldctx); - /* erase all of the userspace pmeg maps, we've clobbered them - all anyway */ - for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) { - if(pmeg_alloc[addr] == 1) { - pmeg_alloc[addr] = 0; - pmeg_ctx[addr] = 0; - pmeg_vaddr[addr] = 0; - } - } - -} - -/* Clear user TLB entries within the context named in mm */ -static inline void flush_tlb_mm (struct mm_struct *mm) -{ - unsigned char oldctx; - unsigned char seg; - unsigned long i; - - oldctx = sun3_get_context(); - sun3_put_context(mm->context); - - for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) { - seg = sun3_get_segmap(i); - if(seg == SUN3_INVALID_PMEG) - continue; - - sun3_put_segmap(i, SUN3_INVALID_PMEG); - pmeg_alloc[seg] = 0; - pmeg_ctx[seg] = 0; - pmeg_vaddr[seg] = 0; - } - - sun3_put_context(oldctx); - -} - -/* Flush a single TLB page. In this case, we're limited to flushing a - single PMEG */ -static inline void flush_tlb_page (struct vm_area_struct *vma, - unsigned long addr) -{ - unsigned char oldctx; - unsigned char i; - - oldctx = sun3_get_context(); - sun3_put_context(vma->vm_mm->context); - addr &= ~SUN3_PMEG_MASK; - if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG) - { - pmeg_alloc[i] = 0; - pmeg_ctx[i] = 0; - pmeg_vaddr[i] = 0; - sun3_put_segmap (addr, SUN3_INVALID_PMEG); - } - sun3_put_context(oldctx); - -} -/* Flush a range of pages from TLB. */ - -static inline void flush_tlb_range (struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned char seg, oldctx; - - start &= ~SUN3_PMEG_MASK; - - oldctx = sun3_get_context(); - sun3_put_context(mm->context); - - while(start < end) - { - if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG) - goto next; - if(pmeg_ctx[seg] == mm->context) { - pmeg_alloc[seg] = 0; - pmeg_ctx[seg] = 0; - pmeg_vaddr[seg] = 0; - } - sun3_put_segmap(start, SUN3_INVALID_PMEG); - next: - start += SUN3_PMEG_SIZE; - } -} - -static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - flush_tlb_all(); -} - -/* Flush kernel page from TLB. */ -static inline void flush_tlb_kernel_page (unsigned long addr) -{ - sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG); -} - -#endif - -#endif /* _M68K_TLBFLUSH_H */ diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h deleted file mode 100644 index ca173e9f26f..00000000000 --- a/include/asm-m68k/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/include/asm-m68k/traps.h b/include/asm-m68k/traps.h deleted file mode 100644 index 8caef25624c..00000000000 --- a/include/asm-m68k/traps.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * linux/include/asm/traps.h - * - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _M68K_TRAPS_H -#define _M68K_TRAPS_H - -#ifndef __ASSEMBLY__ - -#include -#include - -typedef void (*e_vector)(void); - -asmlinkage void auto_inthandler(void); -asmlinkage void user_inthandler(void); -asmlinkage void bad_inthandler(void); - -extern e_vector vectors[]; - -#endif - -#define VEC_RESETSP (0) -#define VEC_RESETPC (1) -#define VEC_BUSERR (2) -#define VEC_ADDRERR (3) -#define VEC_ILLEGAL (4) -#define VEC_ZERODIV (5) -#define VEC_CHK (6) -#define VEC_TRAP (7) -#define VEC_PRIV (8) -#define VEC_TRACE (9) -#define VEC_LINE10 (10) -#define VEC_LINE11 (11) -#define VEC_RESV12 (12) -#define VEC_COPROC (13) -#define VEC_FORMAT (14) -#define VEC_UNINT (15) -#define VEC_RESV16 (16) -#define VEC_RESV17 (17) -#define VEC_RESV18 (18) -#define VEC_RESV19 (19) -#define VEC_RESV20 (20) -#define VEC_RESV21 (21) -#define VEC_RESV22 (22) -#define VEC_RESV23 (23) -#define VEC_SPUR (24) -#define VEC_INT1 (25) -#define VEC_INT2 (26) -#define VEC_INT3 (27) -#define VEC_INT4 (28) -#define VEC_INT5 (29) -#define VEC_INT6 (30) -#define VEC_INT7 (31) -#define VEC_SYS (32) -#define VEC_TRAP1 (33) -#define VEC_TRAP2 (34) -#define VEC_TRAP3 (35) -#define VEC_TRAP4 (36) -#define VEC_TRAP5 (37) -#define VEC_TRAP6 (38) -#define VEC_TRAP7 (39) -#define VEC_TRAP8 (40) -#define VEC_TRAP9 (41) -#define VEC_TRAP10 (42) -#define VEC_TRAP11 (43) -#define VEC_TRAP12 (44) -#define VEC_TRAP13 (45) -#define VEC_TRAP14 (46) -#define VEC_TRAP15 (47) -#define VEC_FPBRUC (48) -#define VEC_FPIR (49) -#define VEC_FPDIVZ (50) -#define VEC_FPUNDER (51) -#define VEC_FPOE (52) -#define VEC_FPOVER (53) -#define VEC_FPNAN (54) -#define VEC_FPUNSUP (55) -#define VEC_MMUCFG (56) -#define VEC_MMUILL (57) -#define VEC_MMUACC (58) -#define VEC_RESV59 (59) -#define VEC_UNIMPEA (60) -#define VEC_UNIMPII (61) -#define VEC_RESV62 (62) -#define VEC_RESV63 (63) -#define VEC_USER (64) - -#define VECOFF(vec) ((vec)<<2) - -#ifndef __ASSEMBLY__ - -/* Status register bits */ -#define PS_T (0x8000) -#define PS_S (0x2000) -#define PS_M (0x1000) -#define PS_C (0x0001) - -/* bits for 68020/68030 special status word */ - -#define FC (0x8000) -#define FB (0x4000) -#define RC (0x2000) -#define RB (0x1000) -#define DF (0x0100) -#define RM (0x0080) -#define RW (0x0040) -#define SZ (0x0030) -#define DFC (0x0007) - -/* bits for 68030 MMU status register (mmusr,psr) */ - -#define MMU_B (0x8000) /* bus error */ -#define MMU_L (0x4000) /* limit violation */ -#define MMU_S (0x2000) /* supervisor violation */ -#define MMU_WP (0x0800) /* write-protected */ -#define MMU_I (0x0400) /* invalid descriptor */ -#define MMU_M (0x0200) /* ATC entry modified */ -#define MMU_T (0x0040) /* transparent translation */ -#define MMU_NUM (0x0007) /* number of levels traversed */ - - -/* bits for 68040 special status word */ -#define CP_040 (0x8000) -#define CU_040 (0x4000) -#define CT_040 (0x2000) -#define CM_040 (0x1000) -#define MA_040 (0x0800) -#define ATC_040 (0x0400) -#define LK_040 (0x0200) -#define RW_040 (0x0100) -#define SIZ_040 (0x0060) -#define TT_040 (0x0018) -#define TM_040 (0x0007) - -/* bits for 68040 write back status word */ -#define WBV_040 (0x80) -#define WBSIZ_040 (0x60) -#define WBBYT_040 (0x20) -#define WBWRD_040 (0x40) -#define WBLNG_040 (0x00) -#define WBTT_040 (0x18) -#define WBTM_040 (0x07) - -/* bus access size codes */ -#define BA_SIZE_BYTE (0x20) -#define BA_SIZE_WORD (0x40) -#define BA_SIZE_LONG (0x00) -#define BA_SIZE_LINE (0x60) - -/* bus access transfer type codes */ -#define BA_TT_MOVE16 (0x08) - -/* bits for 68040 MMU status register (mmusr) */ -#define MMU_B_040 (0x0800) -#define MMU_G_040 (0x0400) -#define MMU_S_040 (0x0080) -#define MMU_CM_040 (0x0060) -#define MMU_M_040 (0x0010) -#define MMU_WP_040 (0x0004) -#define MMU_T_040 (0x0002) -#define MMU_R_040 (0x0001) - -/* bits in the 68060 fault status long word (FSLW) */ -#define MMU060_MA (0x08000000) /* misaligned */ -#define MMU060_LK (0x02000000) /* locked transfer */ -#define MMU060_RW (0x01800000) /* read/write */ -# define MMU060_RW_W (0x00800000) /* write */ -# define MMU060_RW_R (0x01000000) /* read */ -# define MMU060_RW_RMW (0x01800000) /* read/modify/write */ -# define MMU060_W (0x00800000) /* general write, includes rmw */ -#define MMU060_SIZ (0x00600000) /* transfer size */ -#define MMU060_TT (0x00180000) /* transfer type (TT) bits */ -#define MMU060_TM (0x00070000) /* transfer modifier (TM) bits */ -#define MMU060_IO (0x00008000) /* instruction or operand */ -#define MMU060_PBE (0x00004000) /* push buffer bus error */ -#define MMU060_SBE (0x00002000) /* store buffer bus error */ -#define MMU060_PTA (0x00001000) /* pointer A fault */ -#define MMU060_PTB (0x00000800) /* pointer B fault */ -#define MMU060_IL (0x00000400) /* double indirect descr fault */ -#define MMU060_PF (0x00000200) /* page fault (invalid descr) */ -#define MMU060_SP (0x00000100) /* supervisor protection */ -#define MMU060_WP (0x00000080) /* write protection */ -#define MMU060_TWE (0x00000040) /* bus error on table search */ -#define MMU060_RE (0x00000020) /* bus error on read */ -#define MMU060_WE (0x00000010) /* bus error on write */ -#define MMU060_TTR (0x00000008) /* error caused by TTR translation */ -#define MMU060_BPE (0x00000004) /* branch prediction error */ -#define MMU060_SEE (0x00000001) /* software emulated error */ - -/* cases of missing or invalid descriptors */ -#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \ - MMU060_IL | MMU060_PF) -/* bits that indicate real errors */ -#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \ - MMU060_WP | MMU060_TWE | MMU060_RE | MMU060_WE) - -/* structure for stack frames */ - -struct frame { - struct pt_regs ptregs; - union { - struct { - unsigned long iaddr; /* instruction address */ - } fmt2; - struct { - unsigned long effaddr; /* effective address */ - } fmt3; - struct { - unsigned long effaddr; /* effective address */ - unsigned long pc; /* pc of faulted instr */ - } fmt4; - struct { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ - } fmt7; - struct { - unsigned long iaddr; /* instruction address */ - unsigned short int1[4]; /* internal registers */ - } fmt9; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[2]; - } fmta; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[4]; - unsigned long baddr; /* stage B address */ - unsigned short int4[2]; - unsigned long dibuf; /* data cycle input buffer */ - unsigned short int5[3]; - unsigned ver : 4; /* stack frame version # */ - unsigned int6:12; - unsigned short int7[18]; - } fmtb; - } un; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_TRAPS_H */ diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h deleted file mode 100644 index 6441cb5f8e7..00000000000 --- a/include/asm-m68k/types.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* DMA addresses are always 32-bits wide */ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h deleted file mode 100644 index 7107f3fbdbb..00000000000 --- a/include/asm-m68k/uaccess.h +++ /dev/null @@ -1,374 +0,0 @@ -#ifndef __M68K_UACCESS_H -#define __M68K_UACCESS_H - -/* - * User space memory access functions - */ -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* We let the MMU do all checking */ -static inline int access_ok(int type, const void __user *addr, - unsigned long size) -{ - return 1; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int __put_user_bad(void); -extern int __get_user_bad(void); - -#define __put_user_asm(res, x, ptr, bwl, reg, err) \ -asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: moveq.l %3,%0\n" \ - " jra 2b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (res), "=m" (*(ptr)) \ - : #reg (x), "i" (err)) - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -#define __put_user(x, ptr) \ -({ \ - typeof(*(ptr)) __pu_val = (x); \ - int __pu_err = 0; \ - __chk_user_ptr(ptr); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \ - break; \ - case 8: \ - { \ - const void __user *__pu_ptr = (ptr); \ - asm volatile ("\n" \ - "1: moves.l %2,(%1)+\n" \ - "2: moves.l %R2,(%1)\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: movel %3,%0\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .long 3b,10b\n" \ - " .previous" \ - : "+d" (__pu_err), "+a" (__pu_ptr) \ - : "r" (__pu_val), "i" (-EFAULT) \ - : "memory"); \ - break; \ - } \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) -#define put_user(x, ptr) __put_user(x, ptr) - - -#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({ \ - type __gu_val; \ - asm volatile ("\n" \ - "1: moves."#bwl" %2,%1\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub."#bwl" %1,%1\n" \ - " jra 2b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .previous" \ - : "+d" (res), "=&" #reg (__gu_val) \ - : "m" (*(ptr)), "i" (err)); \ - (x) = (typeof(*(ptr)))(unsigned long)__gu_val; \ -}) - -#define __get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT); \ - break; \ - case 2: \ - __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT); \ - break; \ - case 4: \ - __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT); \ - break; \ -/* case 8: disabled because gcc-4.1 has a broken typeof \ - { \ - const void *__gu_ptr = (ptr); \ - u64 __gu_val; \ - asm volatile ("\n" \ - "1: moves.l (%2)+,%1\n" \ - "2: moves.l (%2),%R1\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: move.l %3,%0\n" \ - " sub.l %1,%1\n" \ - " sub.l %R1,%R1\n" \ - " jra 3b\n" \ - " .previous\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10b\n" \ - " .long 2b,10b\n" \ - " .previous" \ - : "+d" (__gu_err), "=&r" (__gu_val), \ - "+a" (__gu_ptr) \ - : "i" (-EFAULT) \ - : "memory"); \ - (x) = (typeof(*(ptr)))__gu_val; \ - break; \ - } */ \ - default: \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) -#define get_user(x, ptr) __get_user(x, ptr) - -unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n); -unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n); - -#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\ - asm volatile ("\n" \ - "1: moves."#s1" (%2)+,%3\n" \ - " move."#s1" %3,(%1)+\n" \ - "2: moves."#s2" (%2)+,%3\n" \ - " move."#s2" %3,(%1)+\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - "3: moves."#s3" (%2)+,%3\n" \ - " move."#s3" %3,(%1)+\n" \ - " .endif\n" \ - "4:\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 1b,10f\n" \ - " .long 2b,20f\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " .long 3b,30f\n" \ - " .endif\n" \ - " .previous\n" \ - "\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "10: clr."#s1" (%1)+\n" \ - "20: clr."#s2" (%1)+\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - "30: clr."#s3" (%1)+\n" \ - " .endif\n" \ - " moveq.l #"#n",%0\n" \ - " jra 4b\n" \ - " .previous\n" \ - : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp) \ - : : "memory") - -static __always_inline unsigned long -__constant_copy_from_user(void *to, const void __user *from, unsigned long n) -{ - unsigned long res = 0, tmp; - - switch (n) { - case 1: - __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1); - break; - case 2: - __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2); - break; - case 3: - __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,); - break; - case 4: - __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4); - break; - case 5: - __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,); - break; - case 6: - __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,); - break; - case 7: - __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b); - break; - case 8: - __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,); - break; - case 9: - __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b); - break; - case 10: - __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w); - break; - case 12: - __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l); - break; - default: - /* we limit the inlined version to 3 moves */ - return __generic_copy_from_user(to, from, n); - } - - return res; -} - -#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3) \ - asm volatile ("\n" \ - " move."#s1" (%2)+,%3\n" \ - "11: moves."#s1" %3,(%1)+\n" \ - "12: move."#s2" (%2)+,%3\n" \ - "21: moves."#s2" %3,(%1)+\n" \ - "22:\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " move."#s3" (%2)+,%3\n" \ - "31: moves."#s3" %3,(%1)+\n" \ - "32:\n" \ - " .endif\n" \ - "4:\n" \ - "\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 4\n" \ - " .long 11b,5f\n" \ - " .long 12b,5f\n" \ - " .long 21b,5f\n" \ - " .long 22b,5f\n" \ - " .ifnc \""#s3"\",\"\"\n" \ - " .long 31b,5f\n" \ - " .long 32b,5f\n" \ - " .endif\n" \ - " .previous\n" \ - "\n" \ - " .section .fixup,\"ax\"\n" \ - " .even\n" \ - "5: moveq.l #"#n",%0\n" \ - " jra 4b\n" \ - " .previous\n" \ - : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp) \ - : : "memory") - -static __always_inline unsigned long -__constant_copy_to_user(void __user *to, const void *from, unsigned long n) -{ - unsigned long res = 0, tmp; - - switch (n) { - case 1: - __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1); - break; - case 2: - __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2); - break; - case 3: - __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,); - break; - case 4: - __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4); - break; - case 5: - __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,); - break; - case 6: - __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,); - break; - case 7: - __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b); - break; - case 8: - __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,); - break; - case 9: - __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b); - break; - case 10: - __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w); - break; - case 12: - __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l); - break; - default: - /* limit the inlined version to 3 moves */ - return __generic_copy_to_user(to, from, n); - } - - return res; -} - -#define __copy_from_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_from_user(to, from, n) : \ - __generic_copy_from_user(to, from, n)) - -#define __copy_to_user(to, from, n) \ -(__builtin_constant_p(n) ? \ - __constant_copy_to_user(to, from, n) : \ - __generic_copy_to_user(to, from, n)) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_from_user(to, from, n) __copy_from_user(to, from, n) -#define copy_to_user(to, from, n) __copy_to_user(to, from, n) - -long strncpy_from_user(char *dst, const char __user *src, long count); -long strnlen_user(const char __user *src, long n); -unsigned long __clear_user(void __user *to, unsigned long n); - -#define clear_user __clear_user - -#define strlen_user(str) strnlen_user(str, 32767) - -#endif /* _M68K_UACCESS_H */ diff --git a/include/asm-m68k/ucontext.h b/include/asm-m68k/ucontext.h deleted file mode 100644 index e4e22669edc..00000000000 --- a/include/asm-m68k/ucontext.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _M68K_UCONTEXT_H -#define _M68K_UCONTEXT_H - -typedef int greg_t; -#define NGREG 18 -typedef greg_t gregset_t[NGREG]; - -typedef struct fpregset { - int f_fpcntl[3]; - int f_fpregs[8*3]; -} fpregset_t; - -struct mcontext { - int version; - gregset_t gregs; - fpregset_t fpregs; -}; - -#define MCONTEXT_VERSION 2 - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct mcontext uc_mcontext; - unsigned long uc_filler[80]; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/include/asm-m68k/unaligned.h b/include/asm-m68k/unaligned.h deleted file mode 100644 index 77698f2dc33..00000000000 --- a/include/asm-m68k/unaligned.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_M68K_UNALIGNED_H -#define _ASM_M68K_UNALIGNED_H - -/* - * The m68k can do unaligned accesses itself. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_M68K_UNALIGNED_H */ diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h deleted file mode 100644 index 965abb8bc7f..00000000000 --- a/include/asm-m68k/unistd.h +++ /dev/null @@ -1,374 +0,0 @@ -#ifndef _ASM_M68K_UNISTD_H_ -#define _ASM_M68K_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -#define __NR_vserver 278 -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 - -#ifdef __KERNEL__ - -#define NR_syscalls 329 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* whitelist for checksyscalls */ -#define __IGNORE_restart_syscall - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/include/asm-m68k/user.h b/include/asm-m68k/user.h deleted file mode 100644 index f1f478d6e05..00000000000 --- a/include/asm-m68k/user.h +++ /dev/null @@ -1,86 +0,0 @@ -#ifndef _M68K_USER_H -#define _M68K_USER_H - -/* Core file format: The core file is written in such a way that gdb - can understand it and provide useful information to the user (under - linux we use the 'trad-core' bfd). There are quite a number of - obstacles to being able to view the contents of the floating point - registers, and until these are solved you will not be able to view the - contents of them. Actually, you can read in the core file and look at - the contents of the user struct to find out what the floating point - registers contain. - The actual file contents are as follows: - UPAGE: 1 page consisting of a user struct that tells gdb what is present - in the file. Directly after this is a copy of the task_struct, which - is currently not used by gdb, but it may come in useful at some point. - All of the registers are stored as part of the upage. The upage should - always be only one page. - DATA: The data area is stored. We use current->end_text to - current->brk to pick up all of the user variables, plus any memory - that may have been malloced. No attempt is made to determine if a page - is demand-zero or if a page is totally unused, we just cover the entire - range. All of the addresses are rounded in such a way that an integral - number of pages is written. - STACK: We need the stack information in order to get a meaningful - backtrace. We need to write the data from (esp) to - current->start_stack, so we round each of these off in order to be able - to write an integer number of pages. - The minimum core file size is 3 pages, or 12288 bytes. -*/ - -struct user_m68kfp_struct { - unsigned long fpregs[8*3]; /* fp0-fp7 registers */ - unsigned long fpcntl[3]; /* fp control regs */ -}; - -/* This is the old layout of "struct pt_regs" as of Linux 1.x, and - is still the layout used by user (the new pt_regs doesn't have - all registers). */ -struct user_regs_struct { - long d1,d2,d3,d4,d5,d6,d7; - long a0,a1,a2,a3,a4,a5,a6; - long d0; - long usp; - long orig_d0; - short stkadj; - short sr; - long pc; - short fmtvec; - short __fill; -}; - - -/* When the kernel dumps core, it starts by dumping the user struct - - this will be used by gdb to figure out where the data and stack segments - are within the file, and what virtual addresses to use. */ -struct user{ -/* We start with the registers, to mimic the way that "memory" is returned - from the ptrace(3,...) function. */ - struct user_regs_struct regs; /* Where the registers are actually stored */ -/* ptrace does not yet supply these. Someday.... */ - int u_fpvalid; /* True if math co-processor being used. */ - /* for this mess. Not yet used. */ - struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */ -/* The rest of this junk is to help gdb figure out what goes where */ - unsigned long int u_tsize; /* Text segment size (pages). */ - unsigned long int u_dsize; /* Data segment size (pages). */ - unsigned long int u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - This is actually the bottom of the stack, - the top of the stack is always found in the - esp register. */ - long int signal; /* Signal that caused the core dump. */ - int reserved; /* No longer used */ - unsigned long u_ar0; /* Used by gdb to help find the values for */ - /* the registers. */ - struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */ - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; -#define NBPG 4096 -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif diff --git a/include/asm-m68k/virtconvert.h b/include/asm-m68k/virtconvert.h deleted file mode 100644 index 22ab05c9c52..00000000000 --- a/include/asm-m68k/virtconvert.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __VIRT_CONVERT__ -#define __VIRT_CONVERT__ - -/* - * Macros used for converting between virtual and physical mappings. - */ - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -/* - * Change virtual addresses to physical addresses and vv. - */ -static inline unsigned long virt_to_phys(void *address) -{ - return __pa(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return __va(address); -} - -/* Permanent address of a page. */ -#ifdef CONFIG_SINGLE_MEMORY_CHUNK -#define page_to_phys(page) \ - __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT)) -#else -#define page_to_phys(_page) ({ \ - struct page *__page = _page; \ - struct pglist_data *pgdat; \ - pgdat = pg_data_table[page_to_nid(__page)]; \ - page_to_pfn(__page) << PAGE_SHIFT; \ -}) -#endif - -/* - * IO bus memory addresses are 1:1 with the physical address, - */ -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -#endif -#endif diff --git a/include/asm-m68k/xor.h b/include/asm-m68k/xor.h deleted file mode 100644 index c82eb12a5b1..00000000000 --- a/include/asm-m68k/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-m68k/zorro.h b/include/asm-m68k/zorro.h deleted file mode 100644 index 5ce97c22b58..00000000000 --- a/include/asm-m68k/zorro.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef _ASM_M68K_ZORRO_H -#define _ASM_M68K_ZORRO_H - -#include - -#define z_readb raw_inb -#define z_readw raw_inw -#define z_readl raw_inl - -#define z_writeb raw_outb -#define z_writew raw_outw -#define z_writel raw_outl - -#define z_memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER); -} - -static inline void __iomem *z_remap_writethrough(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void __iomem *z_remap_fullcache(unsigned long physaddr, - unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define z_unmap iounmap -#define z_iounmap iounmap -#define z_ioremap z_remap_nocache_ser - -#endif /* _ASM_M68K_ZORRO_H */ -- cgit v1.2.3-18-g5258