From 0f78231bffb868a30e8533aace142213266bb811 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 1 Dec 2009 13:37:02 +0100 Subject: mac80211: enable spatial multiplexing powersave Enable spatial multiplexing in mac80211 by telling the driver what to do and, where necessary, sending action frames to the AP to update the requested SMPS mode. Also includes a trivial implementation for hwsim that just logs the requested mode. For now, the userspace interface is in debugfs only, and let you toggle the requested mode at any time. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 25 +++++++++++++++++++- include/net/mac80211.h | 59 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 83 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d9724a28c0c..e8d43d0ff2c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -707,6 +707,10 @@ struct ieee80211_mgmt { u8 action; u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; } __attribute__ ((packed)) sa_query; + struct { + u8 action; + u8 smps_control; + } __attribute__ ((packed)) ht_smps; } u; } __attribute__ ((packed)) action; } u; @@ -824,6 +828,7 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_LDPC_CODING 0x0001 #define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 #define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 #define IEEE80211_HT_CAP_GRN_FLD 0x0010 #define IEEE80211_HT_CAP_SGI_20 0x0020 #define IEEE80211_HT_CAP_SGI_40 0x0040 @@ -839,6 +844,7 @@ struct ieee80211_ht_cap { /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 /* * Maximum length of AMPDU that the STA can receive. @@ -922,12 +928,17 @@ struct ieee80211_ht_info { #define IEEE80211_MAX_AMPDU_BUF 0x40 -/* Spatial Multiplexing Power Save Modes */ +/* Spatial Multiplexing Power Save Modes (for capability) */ #define WLAN_HT_CAP_SM_PS_STATIC 0 #define WLAN_HT_CAP_SM_PS_DYNAMIC 1 #define WLAN_HT_CAP_SM_PS_INVALID 2 #define WLAN_HT_CAP_SM_PS_DISABLED 3 +/* for SM power control field lower two bits */ +#define WLAN_HT_SMPS_CONTROL_DISABLED 0 +#define WLAN_HT_SMPS_CONTROL_STATIC 1 +#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 + /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 @@ -1150,6 +1161,18 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* HT action codes */ +enum ieee80211_ht_actioncode { + WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, + WLAN_HT_ACTION_SMPS = 1, + WLAN_HT_ACTION_PSMP = 2, + WLAN_HT_ACTION_PCO_PHASE = 3, + WLAN_HT_ACTION_CSI = 4, + WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, + WLAN_HT_ACTION_COMPRESSED_BF = 6, + WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, +}; + /* Security key length */ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e94cc526b0f..e6b6bf81d5b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -597,8 +597,10 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed + * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed */ enum ieee80211_conf_changed { + IEEE80211_CONF_CHANGE_SMPS = BIT(1), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_MONITOR = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), @@ -608,6 +610,21 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; +/** + * enum ieee80211_smps_mode - spatial multiplexing power save mode + * + * @ + */ +enum ieee80211_smps_mode { + IEEE80211_SMPS_AUTOMATIC, + IEEE80211_SMPS_OFF, + IEEE80211_SMPS_STATIC, + IEEE80211_SMPS_DYNAMIC, + + /* keep last */ + IEEE80211_SMPS_NUM_MODES, +}; + /** * struct ieee80211_conf - configuration of the device * @@ -636,6 +653,10 @@ enum ieee80211_conf_changed { * @short_frame_max_tx_count: Maximum number of transmissions for a "short" * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the * number of transmissions not the number of retries + * + * @smps_mode: spatial multiplexing powersave mode; note that + * %IEEE80211_SMPS_STATIC is used when the device is not + * configured for an HT channel */ struct ieee80211_conf { u32 flags; @@ -648,6 +669,7 @@ struct ieee80211_conf { struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + enum ieee80211_smps_mode smps_mode; }; /** @@ -930,6 +952,16 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_BEACON_FILTER: * Hardware supports dropping of irrelevant beacon frames to * avoid waking up cpu. + * + * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: + * Hardware supports static spatial multiplexing powersave, + * ie. can turn off all but one chain even on HT connections + * that should be using more chains. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS: + * Hardware supports dynamic spatial multiplexing powersave, + * ie. can turn off all but one chain and then wake the rest + * up as required after, for example, rts/cts handshake. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -947,6 +979,8 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_BEACON_FILTER = 1<<14, + IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, + IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, }; /** @@ -1214,6 +1248,31 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * signal strength threshold checking. */ +/** + * DOC: Spatial multiplexing power save + * + * SMPS (Spatial multiplexing power save) is a mechanism to conserve + * power in an 802.11n implementation. For details on the mechanism + * and rationale, please refer to 802.11 (as amended by 802.11n-2009) + * "11.2.3 SM power save". + * + * The mac80211 implementation is capable of sending action frames + * to update the AP about the station's SMPS mode, and will instruct + * the driver to enter the specific mode. It will also announce the + * requested SMPS mode during the association handshake. Hardware + * support for this feature is required, and can be indicated by + * hardware flags. + * + * The default mode will be "automatic", which nl80211/cfg80211 + * defines to be dynamic SMPS in (regular) powersave, and SMPS + * turned off otherwise. + * + * To support this feature, the driver must set the appropriate + * hardware support flags, and handle the SMPS flag to the config() + * operation. It will then with this mechanism be instructed to + * enter the requested SMPS mode while associated to an HT AP. + */ + /** * DOC: Frame filtering * -- cgit v1.2.3-18-g5258