From 84084a3197a9fdec10fa542c0df11928a784e7fc Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Fri, 22 Jul 2011 14:54:00 -0700 Subject: Bluetooth: Perform L2CAP SDU reassembly without copying data Use sk_buff fragment capabilities to link together incoming skbs instead of allocating a new skb for reassembly and copying. The new reassembly code works equally well for ERTM and streaming mode, so there is now one reassembly function instead of two. Signed-off-by: Mat Martineau Signed-off-by: Gustavo F. Padovan --- include/net/bluetooth/l2cap.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 7f878b9d564..ab90ae0970a 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -354,8 +354,8 @@ struct l2cap_chan { __u8 retry_count; __u8 num_acked; __u16 sdu_len; - __u16 partial_sdu_len; struct sk_buff *sdu; + struct sk_buff *sdu_last_frag; __u8 remote_tx_win; __u8 remote_max_tx; @@ -448,7 +448,6 @@ enum { #define L2CAP_CONF_MAX_CONF_RSP 2 enum { - CONN_SAR_SDU, CONN_SREJ_SENT, CONN_WAIT_F, CONN_SREJ_ACT, -- cgit v1.2.3-18-g5258 From 3b9ce80ce96aeaeacab5e26442987df45584a049 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 27 Sep 2011 20:56:12 +0200 Subject: cfg80211/mac80211: apply station uAPSD parameters selectively Currently, when hostapd sets the station as authorized we also overwrite its uAPSD parameter. This obviously leads to buggy behaviour (later, with my patches that actually add uAPSD support). To fix this, only apply those parameters if they were actually set in nl80211, and to achieve that add a bitmap of things to apply. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 31d823a3092..34b8f269976 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -423,6 +423,17 @@ enum plink_actions { PLINK_ACTION_BLOCK, }; +/** + * enum station_parameters_apply_mask - station parameter values to apply + * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * + * Not all station parameters have in-band "no change" signalling, + * for those that don't these flags will are used. + */ +enum station_parameters_apply_mask { + STATION_PARAM_APPLY_UAPSD = BIT(0), +}; + /** * struct station_parameters - station parameters * @@ -450,6 +461,7 @@ struct station_parameters { u8 *supported_rates; struct net_device *vlan; u32 sta_flags_mask, sta_flags_set; + u32 sta_modify_mask; int listen_interval; u16 aid; u8 supported_rates_len; -- cgit v1.2.3-18-g5258 From 109086ce0b0f94760bdb0e8e2566ff8a2d673639 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Sep 2011 14:12:50 +0300 Subject: nl80211: support sending TDLS commands/frames Add support for sending high-level TDLS commands and TDLS frames via NL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add appropriate cfg80211 callbacks for lower level drivers. Add wiphy capability flags for TDLS support and advertise them via nl80211. Signed-off-by: Arik Nemtsov Cc: Kalyan C Gaddam Signed-off-by: John W. Linville --- include/net/cfg80211.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 34b8f269976..74f4f85be32 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1422,6 +1422,9 @@ struct cfg80211_gtk_rekey_data { * @set_ringparam: Set tx and rx ring sizes. * * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tdls_mgmt: Transmit a TDLS management frame. + * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -1605,6 +1608,12 @@ struct cfg80211_ops { int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); + + int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, u8 action_code, u8 dialog_token, + u16 status_code, const u8 *buf, size_t len); + int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, enum nl80211_tdls_operation oper); }; /* @@ -1657,6 +1666,12 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the * firmware. * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. + * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. + * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) + * link setup/discovery operations internally. Setup, discovery and + * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT + * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be + * used for asking the driver/firmware to perform a TDLS operation. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1673,6 +1688,8 @@ enum wiphy_flags { WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), + WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), + WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), }; /** -- cgit v1.2.3-18-g5258 From 768db3438b4b48a33d073093bb364e624409cab7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 28 Sep 2011 14:12:51 +0300 Subject: mac80211: standardize adding supported rates IEs Relocate the mesh implementation of adding the (extended) supported rates IE to util.c, anticipating its use by other parts of mac80211. Signed-off-by: Arik Nemtsov Cc: Kalyan C Gaddam Signed-off-by: John W. Linville --- include/net/mac80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1e83afae3c6..b5f7ada2f87 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3444,4 +3444,9 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, int rssi_max_thold); void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); + +int ieee80211_add_srates_ie(struct ieee80211_vif *vif, struct sk_buff *skb); + +int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif, + struct sk_buff *skb); #endif /* MAC80211_H */ -- cgit v1.2.3-18-g5258 From 042ec4533720122e6cb93dd9f3b6a75fe2fcff16 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:26 +0200 Subject: mac80211: let drivers inform it about per TID buffered frames For uAPSD implementation, it is necessary to know on which ACs frames are buffered. mac80211 obviously knows about the frames it has buffered itself, but with aggregation many drivers buffer frames. Thus, mac80211 needs to be informed about this. For now, since we don't have APSD in any form, this will unconditionally set the TIM bit for the station but later with uAPSD only some ACs might cause the TIM bit to be set. ath9k is the only driver using this API and I only modify it in the most basic way, it won't be able to implement uAPSD with this yet. But it can't do that anyway since there's no way to selectively release frames to the peer yet. Since drivers will buffer frames per TID, let them inform mac80211 on a per TID basis, mac80211 will then sort out the AC mapping itself. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b5f7ada2f87..e66638e749c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2361,17 +2361,35 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, #define IEEE80211_TX_STATUS_HEADROOM 13 /** - * ieee80211_sta_set_tim - set the TIM bit for a sleeping station + * ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames * @sta: &struct ieee80211_sta pointer for the sleeping station + * @tid: the TID that has buffered frames + * @buffered: indicates whether or not frames are buffered for this TID * * If a driver buffers frames for a powersave station instead of passing - * them back to mac80211 for retransmission, the station needs to be told - * to wake up using the TIM bitmap in the beacon. - * - * This function sets the station's TIM bit - it will be cleared when the - * station wakes up. - */ -void ieee80211_sta_set_tim(struct ieee80211_sta *sta); + * them back to mac80211 for retransmission, the station may still need + * to be told that there are buffered frames via the TIM bit. + * + * This function informs mac80211 whether or not there are frames that are + * buffered in the driver for a given TID; mac80211 can then use this data + * to set the TIM bit (NOTE: This may call back into the driver's set_tim + * call! Beware of the locking!) + * + * If all frames are released to the station (due to PS-poll or uAPSD) + * then the driver needs to inform mac80211 that there no longer are + * frames buffered. However, when the station wakes up mac80211 assumes + * that all buffered frames will be transmitted and clears this data, + * drivers need to make sure they inform mac80211 about all buffered + * frames on the sleep transition (sta_notify() with %STA_NOTIFY_SLEEP). + * + * Note that technically mac80211 only needs to know this per AC, not per + * TID, but since driver buffering will inevitably happen per TID (since + * it is related to aggregation) it is easier to make mac80211 map the + * TID to the AC as required instead of keeping track in all drivers that + * use this API. + */ +void ieee80211_sta_set_buffered(struct ieee80211_sta *sta, + u8 tid, bool buffered); /** * ieee80211_tx_status - transmit status callback -- cgit v1.2.3-18-g5258 From 948d887dec1042a7d78ae311908113e26502062f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:29 +0200 Subject: mac80211: split PS buffers into ACs For uAPSD support we'll need to have per-AC PS buffers. As this is a major undertaking, split the buffers before really adding support for uAPSD. This already makes some reference to the uapsd_queues variable, but for now that will never be non-zero. Since book-keeping is complicated, also change the logic for keeping a maximum of frames only and allow 64 frames per AC (up from 128 for a station). Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e66638e749c..acf9eaf5964 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -109,6 +109,7 @@ enum ieee80211_ac_numbers { IEEE80211_AC_BE = 2, IEEE80211_AC_BK = 3, }; +#define IEEE80211_NUM_ACS 4 /** * struct ieee80211_tx_queue_params - transmit queue configuration -- cgit v1.2.3-18-g5258 From 4049e09acdf4ffd270cb8fbf1cf5b39c3d02357c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:32 +0200 Subject: mac80211: allow releasing driver-buffered frames If there are frames for a station buffered in the driver, mac80211 announces those in the TIM IE but there's no way to release them. Add new API to release such frames and use it when the station polls for a frame. Since the API will soon also be used for uAPSD it is easily extensible. Note that before this change drivers announcing driver-buffered frames in the TIM bit actually will respond to a PS-Poll with a potentially lower priority frame (if there are any frames buffered in mac80211), after this patch a driver that hasn't been changed will no longer respond at all. This only affects ath9k, which will need to be fixed to implement the new API. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index acf9eaf5964..dc2ea46eb5d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1621,6 +1621,14 @@ enum ieee80211_tx_sync_type { IEEE80211_TX_SYNC_ACTION, }; +/** + * enum ieee80211_frame_release_type - frame release reason + * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll + */ +enum ieee80211_frame_release_type { + IEEE80211_FRAME_RELEASE_PSPOLL, +}; + /** * struct ieee80211_ops - callbacks from mac80211 to the driver * @@ -1931,6 +1939,23 @@ enum ieee80211_tx_sync_type { * The callback can sleep. * @rssi_callback: Notify driver when the average RSSI goes above/below * thresholds that were registered previously. The callback can sleep. + * + * @release_buffered_frames: Release buffered frames according to the given + * parameters. In the case where the driver buffers some frames for + * sleeping stations mac80211 will use this callback to tell the driver + * to release some frames, either for PS-poll or uAPSD. + * Note that if the @more_data paramter is %false the driver must check + * if there are more frames on the given TIDs, and if there are more than + * the frames being released then it must still set the more-data bit in + * the frame. If the @more_data parameter is %true, then of course the + * more-data bit must always be set. + * The @tids parameter tells the driver which TIDs to release frames + * from, for PS-poll it will always have only a single bit set. + * In the case this is used for uAPSD, the @num_frames parameter may be + * bigger than one, but the driver may send fewer frames (it must send + * at least one, however). In this case it is also responsible for + * setting the EOSP flag in the QoS header of the frames. + * This callback must be atomic. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -2045,6 +2070,12 @@ struct ieee80211_ops { const struct cfg80211_bitrate_mask *mask); void (*rssi_callback)(struct ieee80211_hw *hw, enum ieee80211_rssi_event rssi_event); + + void (*release_buffered_frames)(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u16 tids, int num_frames, + enum ieee80211_frame_release_type reason, + bool more_data); }; /** -- cgit v1.2.3-18-g5258 From 47086fc51aa2220f58049704a8b73e4fcdf372b9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:33 +0200 Subject: mac80211: implement uAPSD Add uAPSD support to mac80211. This is probably not possible with all devices, so advertising it with the cfg80211 flag will be left up to drivers that want it. Due to my previous patches it is now a fairly straight-forward extension. Drivers need to have accurate TX status reporting for the EOSP frame. For drivers that buffer themselves, the provided APIs allow releasing the right number of frames, but then drivers need to set EOSP and more-data themselves. This is documented in more detail in the new code itself. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dc2ea46eb5d..dd07964ef15 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -339,9 +339,9 @@ struct ieee80211_bss_conf { * used to indicate that a frame was already retried due to PS * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, * used to indicate frame should not be encrypted - * @IEEE80211_TX_CTL_PSPOLL_RESPONSE: (internal?) - * This frame is a response to a PS-poll frame and should be sent - * although the station is in powersave mode. + * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll + * frame (PS-Poll or uAPSD) and should be sent although the station + * is in powersave mode. * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the * transmit function after the current frame, this can be used * by drivers to kick the DMA queue only if unset or when the @@ -367,6 +367,10 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_NO_CCK_RATE: This frame will be sent at non CCK rate. * This flag is actually used for management frame especially for P2P * frames not being sent at CCK rate in 2GHz band. + * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period, + * when its status is reported the service period ends. For frames in + * an SP that mac80211 transmits, it is already set; for driver frames + * the driver may set this flag. * * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. @@ -388,7 +392,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), - IEEE80211_TX_CTL_PSPOLL_RESPONSE = BIT(17), + IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17), IEEE80211_TX_CTL_MORE_FRAMES = BIT(18), IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19), IEEE80211_TX_INTFL_HAS_RADIOTAP = BIT(20), @@ -398,6 +402,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_TX_OFFCHAN = BIT(25), IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26), IEEE80211_TX_CTL_NO_CCK_RATE = BIT(27), + IEEE80211_TX_STATUS_EOSP = BIT(28), }; #define IEEE80211_TX_CTL_STBC_SHIFT 23 @@ -411,9 +416,9 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \ IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \ IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \ - IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_PSPOLL_RESPONSE | \ + IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \ IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \ - IEEE80211_TX_CTL_STBC) + IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP) /** * enum mac80211_rate_control_flags - per-rate flags set by the @@ -1624,9 +1629,12 @@ enum ieee80211_tx_sync_type { /** * enum ieee80211_frame_release_type - frame release reason * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll + * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to + * frame received on trigger-enabled AC */ enum ieee80211_frame_release_type { IEEE80211_FRAME_RELEASE_PSPOLL, + IEEE80211_FRAME_RELEASE_UAPSD, }; /** @@ -1954,7 +1962,9 @@ enum ieee80211_frame_release_type { * In the case this is used for uAPSD, the @num_frames parameter may be * bigger than one, but the driver may send fewer frames (it must send * at least one, however). In this case it is also responsible for - * setting the EOSP flag in the QoS header of the frames. + * setting the EOSP flag in the QoS header of the frames. Also, when the + * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP + * on the last frame in the SP. * This callback must be atomic. */ struct ieee80211_ops { -- cgit v1.2.3-18-g5258 From deeaee197b0fa694ba6c8f02cdb57b3be7115b4f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:35 +0200 Subject: mac80211: reply only once to each PS-poll If a PS-poll frame is retried (but was received) there is no way to detect that since it has no sequence number. As a consequence, the standard asks us to not react to PS-poll frames until the response to one made it out (was ACKed or lost). Implement this by using the WLAN_STA_SP flags to also indicate a PS-Poll "service period" and the IEEE80211_TX_STATUS_EOSP flag for the response packet to indicate the end of the "SP" as usual. We could use separate flags, but that will most likely completely confuse drivers, and while the standard doesn't exclude simultaneously polling using uAPSD and PS-Poll, doing that seems quite problematic. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dd07964ef15..ee6449eff7d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -370,7 +370,8 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period, * when its status is reported the service period ends. For frames in * an SP that mac80211 transmits, it is already set; for driver frames - * the driver may set this flag. + * the driver may set this flag. It is also used to do the same for + * PS-Poll responses. * * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. @@ -1959,6 +1960,12 @@ enum ieee80211_frame_release_type { * more-data bit must always be set. * The @tids parameter tells the driver which TIDs to release frames * from, for PS-poll it will always have only a single bit set. + * In the case this is used for a PS-poll initiated release, the + * @num_frames parameter will always be 1 so code can be shared. In + * this case the driver must also set %IEEE80211_TX_STATUS_EOSP flag + * on the TX status (and must report TX status) so that the PS-poll + * period is properly ended. This is used to avoid sending multiple + * responses for a retried PS-poll frame. * In the case this is used for uAPSD, the @num_frames parameter may be * bigger than one, but the driver may send fewer frames (it must send * at least one, however). In this case it is also responsible for -- cgit v1.2.3-18-g5258 From 40b96408831f038b1a6b45e8b22cd050f82a3896 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:38 +0200 Subject: mac80211: explicitly notify drivers of frame release iwlwifi needs to know the number of frames that are going to be sent to a station while it is asleep so it can properly handle the uCode blocking of that station. Before uAPSD, we got by by telling the device that a single frame was going to be released whenever we encountered IEEE80211_TX_CTL_POLL_RESPONSE. With uAPSD, however, that is no longer possible since there could be more than a single frame. To support this model, add a new callback to notify drivers when frames are going to be released. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ee6449eff7d..778572d38bd 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1973,6 +1973,18 @@ enum ieee80211_frame_release_type { * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP * on the last frame in the SP. * This callback must be atomic. + * @allow_buffered_frames: Prepare device to allow the given number of frames + * to go out to the given station. The frames will be sent by mac80211 + * via the usual TX path after this call. The TX information for frames + * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set + * and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case + * frames from multiple TIDs are released and the driver might reorder + * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag + * on the last frame and clear it on all others and also handle the EOSP + * bit in the QoS header correctly. + * The @tids parameter is a bitmap and tells the driver which TIDs the + * frames will be on; it will at most have two bits set. + * This callback must be atomic. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -2088,6 +2100,11 @@ struct ieee80211_ops { void (*rssi_callback)(struct ieee80211_hw *hw, enum ieee80211_rssi_event rssi_event); + void (*allow_buffered_frames)(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u16 tids, int num_frames, + enum ieee80211_frame_release_type reason, + bool more_data); void (*release_buffered_frames)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u16 tids, int num_frames, -- cgit v1.2.3-18-g5258 From 37fbd9080088f5f98ab81a6f2ad456857971a089 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:39 +0200 Subject: mac80211: allow out-of-band EOSP notification iwlwifi has a separate EOSP notification from the device, and to make use of that properly it needs to be passed to mac80211. To be able to mix with tx_status_irqsafe and rx_irqsafe it also needs to be an "_irqsafe" version in the sense that it goes through the tasklet, the actual flag clearing would be IRQ-safe but doing it directly would cause reordering issues. This is needed in the case of a P2P GO going into an absence period without transmitting any frames that should be driver-released as in this case there's no other way to inform mac80211 that the service period ended. Note that for drivers that don't use the _irqsafe functions another version of this function will be required. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 778572d38bd..3df32a04402 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1971,7 +1971,8 @@ enum ieee80211_frame_release_type { * at least one, however). In this case it is also responsible for * setting the EOSP flag in the QoS header of the frames. Also, when the * service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP - * on the last frame in the SP. + * on the last frame in the SP. Alternatively, it may call the function + * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP. * This callback must be atomic. * @allow_buffered_frames: Prepare device to allow the given number of frames * to go out to the given station. The frames will be sent by mac80211 @@ -1981,7 +1982,8 @@ enum ieee80211_frame_release_type { * frames from multiple TIDs are released and the driver might reorder * them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag * on the last frame and clear it on all others and also handle the EOSP - * bit in the QoS header correctly. + * bit in the QoS header correctly. Alternatively, it can also call the + * ieee80211_sta_eosp_irqsafe() function. * The @tids parameter is a bitmap and tells the driver which TIDs the * frames will be on; it will at most have two bits set. * This callback must be atomic. @@ -3112,6 +3114,24 @@ struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, void ieee80211_sta_block_awake(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, bool block); +/** + * ieee80211_sta_eosp - notify mac80211 about end of SP + * @pubsta: the station + * + * When a device transmits frames in a way that it can't tell + * mac80211 in the TX status about the EOSP, it must clear the + * %IEEE80211_TX_STATUS_EOSP bit and call this function instead. + * This applies for PS-Poll as well as uAPSD. + * + * Note that there is no non-_irqsafe version right now as + * it wasn't needed, but just like _tx_status() and _rx() + * must not be mixed in irqsafe/non-irqsafe versions, this + * function must not be mixed with those either. Use the + * all irqsafe, or all non-irqsafe, don't mix! If you need + * the non-irqsafe version of this, you need to add it. + */ +void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta); + /** * ieee80211_iter_keys - iterate keys programmed into the device * @hw: pointer obtained from ieee80211_alloc_hw() -- cgit v1.2.3-18-g5258 From 4b801bc969364a980c1366e48155d1a29d20661b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Sep 2011 16:04:40 +0200 Subject: mac80211: document client powersave With the addition of uAPSD and driver buffering the powersave handling has gotten quite complex. Add a section to the documentation to explain it for anyone wanting to implement it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3df32a04402..bc799304be7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1538,6 +1538,95 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * This rule applies to all other FIF flags as well. */ +/** + * DOC: AP support for powersaving clients + * + * In order to implement AP and P2P GO modes, mac80211 has support for + * client powersaving, both "legacy" PS (PS-Poll/null data) and uAPSD. + * There currently is no support for sAPSD. + * + * There is one assumption that mac80211 makes, namely that a client + * will not poll with PS-Poll and trigger with uAPSD at the same time. + * Both are supported, and both can be used by the same client, but + * they can't be used concurrently by the same client. This simplifies + * the driver code. + * + * The first thing to keep in mind is that there is a flag for complete + * driver implementation: %IEEE80211_HW_AP_LINK_PS. If this flag is set, + * mac80211 expects the driver to handle most of the state machine for + * powersaving clients and will ignore the PM bit in incoming frames. + * Drivers then use ieee80211_sta_ps_transition() to inform mac80211 of + * stations' powersave transitions. In this mode, mac80211 also doesn't + * handle PS-Poll/uAPSD. + * + * In the mode without %IEEE80211_HW_AP_LINK_PS, mac80211 will check the + * PM bit in incoming frames for client powersave transitions. When a + * station goes to sleep, we will stop transmitting to it. There is, + * however, a race condition: a station might go to sleep while there is + * data buffered on hardware queues. If the device has support for this + * it will reject frames, and the driver should give the frames back to + * mac80211 with the %IEEE80211_TX_STAT_TX_FILTERED flag set which will + * cause mac80211 to retry the frame when the station wakes up. The + * driver is also notified of powersave transitions by calling its + * @sta_notify callback. + * + * When the station is asleep, it has three choices: it can wake up, + * it can PS-Poll, or it can possibly start a uAPSD service period. + * Waking up is implemented by simply transmitting all buffered (and + * filtered) frames to the station. This is the easiest case. When + * the station sends a PS-Poll or a uAPSD trigger frame, mac80211 + * will inform the driver of this with the @allow_buffered_frames + * callback; this callback is optional. mac80211 will then transmit + * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE + * on each frame. The last frame in the service period (or the only + * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to + * indicate that it ends the service period; as this frame must have + * TX status report it also sets %IEEE80211_TX_CTL_REQ_TX_STATUS. + * When TX status is reported for this frame, the service period is + * marked has having ended and a new one can be started by the peer. + * + * Another race condition can happen on some devices like iwlwifi + * when there are frames queued for the station and it wakes up + * or polls; the frames that are already queued could end up being + * transmitted first instead, causing reordering and/or wrong + * processing of the EOSP. The cause is that allowing frames to be + * transmitted to a certain station is out-of-band communication to + * the device. To allow this problem to be solved, the driver can + * call ieee80211_sta_block_awake() if frames are buffered when it + * is notified that the station went to sleep. When all these frames + * have been filtered (see above), it must call the function again + * to indicate that the station is no longer blocked. + * + * If the driver buffers frames in the driver for aggregation in any + * way, it must use the ieee80211_sta_set_buffered() call when it is + * notified of the station going to sleep to inform mac80211 of any + * TIDs that have frames buffered. Note that when a station wakes up + * this information is reset (hence the requirement to call it when + * informed of the station going to sleep). Then, when a service + * period starts for any reason, @release_buffered_frames is called + * with the number of frames to be released and which TIDs they are + * to come from. In this case, the driver is responsible for setting + * the EOSP (for uAPSD) and MORE_DATA bits in the released frames, + * to help the @more_data paramter is passed to tell the driver if + * there is more data on other TIDs -- the TIDs to release frames + * from are ignored since mac80211 doesn't know how many frames the + * buffers for those TIDs contain. + * + * If the driver also implement GO mode, where absence periods may + * shorten service periods (or abort PS-Poll responses), it must + * filter those response frames except in the case of frames that + * are buffered in the driver -- those must remain buffered to avoid + * reordering. Because it is possible that no frames are released + * in this case, the driver must call ieee80211_sta_eosp_irqsafe() + * to indicate to mac80211 that the service period ended anyway. + * + * Finally, if frames from multiple TIDs are released from mac80211 + * but the driver might reorder them, it must clear & set the flags + * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP) + * and also take care of the EOSP and MORE_DATA bits in the frame. + * The driver may also use ieee80211_sta_eosp_irqsafe() in this case. + */ + /** * enum ieee80211_filter_flags - hardware filter flags * -- cgit v1.2.3-18-g5258 From 893d73f4a15bda966cb72f84897898eb235e134c Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 29 Sep 2011 13:42:25 +0200 Subject: mac80211: Allow noack flag overwrite for injected frames Allow injected unicast frames to be sent without having to wait for an ACK. Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- include/net/ieee80211_radiotap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/net') diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index b0be5fb9de1..7e2c4d483ad 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -251,6 +251,7 @@ enum ieee80211_radiotap_type { * retries */ #define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */ #define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */ +#define IEEE80211_RADIOTAP_F_TX_NOACK 0x0008 /* don't expect an ack */ /* For IEEE80211_RADIOTAP_MCS */ -- cgit v1.2.3-18-g5258 From b6f35301efda5e94342cfcca9e29b7b3e9a5f827 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 29 Sep 2011 20:34:04 +0530 Subject: mac80211: Send nullfunc frames at lower rate during connection monitor Recently mac80211 was changed to use nullfunc instead of probe request for connection monitoring for tx ack status reporting hardwares. Sometimes in congested network, STA got disconnected quickly after the association. It was observered that the rate control was not adopted to environment due to minimal transmission. As the nullfunc are used for monitoring purpose, these frames should not be sacrificed for rate control updation. So it is better to send the monitoring null func frames at minimum rate that could help to retain the connection. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index bc799304be7..135e897b61c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -372,6 +372,9 @@ struct ieee80211_bss_conf { * an SP that mac80211 transmits, it is already set; for driver frames * the driver may set this flag. It is also used to do the same for * PS-Poll responses. + * @IEEE80211_TX_CTL_USE_MINRATE: This frame will be sent at lowest rate. + * This flag is used to send nullfunc frame at minimum rate when + * the nullfunc is used for connection monitoring purpose. * * Note: If you have to add new flags to the enumeration, then don't * forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary. @@ -404,6 +407,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_TKIP_MIC_FAILURE = BIT(26), IEEE80211_TX_CTL_NO_CCK_RATE = BIT(27), IEEE80211_TX_STATUS_EOSP = BIT(28), + IEEE80211_TX_CTL_USE_MINRATE = BIT(29), }; #define IEEE80211_TX_CTL_STBC_SHIFT 23 -- cgit v1.2.3-18-g5258 From 8a3a3c85e44d58f5af0adac74a0b866ba89a1978 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 2 Oct 2011 10:15:52 +0200 Subject: mac80211: pass vif param to conf_tx() callback tx params should be configured per interface. add ieee80211_vif param to the conf_tx callback, and change all the drivers that use this callback. The following spatch was used: @rule1@ struct ieee80211_ops ops; identifier conf_tx_op; @@ ops.conf_tx = conf_tx_op; @rule2@ identifier rule1.conf_tx_op; identifier hw, queue, params; @@ conf_tx_op ( - struct ieee80211_hw *hw, + struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params) {...} Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- include/net/mac80211.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 135e897b61c..cd108dfa195 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2152,7 +2152,8 @@ struct ieee80211_ops { struct ieee80211_sta *sta); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); - int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, + int (*conf_tx)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, u16 queue, const struct ieee80211_tx_queue_params *params); u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, -- cgit v1.2.3-18-g5258