From c2315b4ea9ac9c3f8caf03c3511d86fabe4a5fcd Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Wed, 16 Sep 2009 17:10:55 -0700 Subject: wimax/i2400m: clarify and fix i2400m->{ready,updown} The i2400m driver uses two different bits to distinguish how much the driver is up. i2400m->ready is used to denote that the infrastructure to communicate with the device is up and running. i2400m->updown is used to indicate if 'ready' and the device is up and running, ready to take control and data traffic. However, all this was pretty dirty and not clear, with many open spots where race conditions were present. This commit cleans up the situation by: - documenting the usage of both bits - setting them only in specific, well controlled places (i2400m_dev_start, i2400m_dev_stop) - ensuring the i2400m workqueue can't get in the middle of the setting by flushing it when i2400m->ready is set to zero. This allows the report hook not having to check again for the bit to be set [rx.c:i2400m_report_hook_work()]. - using i2400m->updown to determine if the device is up and running instead of the wimax state in i2400m_dev_reset_handle(). - not loosing missed messages sent by the hardware before i2400m->ready is set. In rx.c, whatever the device sends can be sent to user space over the message pipes as soon as the wimax device is registered, so don't wait for i2400m->ready to be set. Signed-off-by: Inaky Perez-Gonzalez --- include/net/wimax.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/net/wimax.h') diff --git a/include/net/wimax.h b/include/net/wimax.h index 2af7bf839f2..d69c4a7a126 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -195,6 +195,12 @@ * defining the `struct nla_policy` for each message, it has to have * an array size of WIMAX_GNL_ATTR_MAX+1. * + * The op_*() function pointers will not be called if the wimax_dev is + * in a state <= %WIMAX_ST_UNINITIALIZED. The exception is: + * + * - op_reset: can be called at any time after wimax_dev_add() has + * been called. + * * THE PIPE INTERFACE: * * This interface is kept intentionally simple. The driver can send -- cgit v1.2.3-18-g5258