From b32e724308300a6ecead0f4895f0452a06a4291d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 23 Nov 2011 12:04:08 -0300 Subject: [media] rc: Add support for decoding Sanyo protocol This protocol is found on Sanyo/Aiwa remotes. Tested with an Aiwa RC-7AS06 remote control. Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/media') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 26a3bd0fe57..183d701eb3c 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -18,13 +18,15 @@ #define RC_TYPE_JVC (1 << 3) /* JVC protocol */ #define RC_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ #define RC_TYPE_RC5_SZ (1 << 5) /* RC5 variant used by Streamzap */ +#define RC_TYPE_SANYO (1 << 6) /* Sanyo protocol */ #define RC_TYPE_MCE_KBD (1 << 29) /* RC6-ish MCE keyboard/mouse */ #define RC_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */ #define RC_TYPE_OTHER (1u << 31) -#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ - RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ - RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER) +#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC | RC_TYPE_RC6 | \ + RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \ + RC_TYPE_RC5_SZ | RC_TYPE_SANYO | RC_TYPE_MCE_KBD | \ + RC_TYPE_OTHER) struct rc_map_table { u32 scancode; -- cgit v1.2.3-18-g5258 From c1026c580df130c1d1943fff99bae0bef2cafa7b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Nov 2011 16:59:05 -0300 Subject: [media] omap3isp: Clarify the clk_pol field in platform data The field is used to select the polarity of the pixel clock signal. "Inverted" and "non inverted" are bad descriptions, specify instead on which clock edge the signals are sampled. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- include/media/omap3isp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h index e917b1da657..042849a3464 100644 --- a/include/media/omap3isp.h +++ b/include/media/omap3isp.h @@ -58,7 +58,7 @@ enum { * ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0] * ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0] * @clk_pol: Pixel clock polarity - * 0 - Non Inverted, 1 - Inverted + * 0 - Sample on rising edge, 1 - Sample on falling edge * @hs_pol: Horizontal synchronization polarity * 0 - Active high, 1 - Active low * @vs_pol: Vertical synchronization polarity -- cgit v1.2.3-18-g5258 From fa5034c667c224be48db31a0d043dba305e8e7a8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sat, 5 Nov 2011 18:42:01 -0300 Subject: [media] media: fix truncated entity specification When enumerating an entity, assign the entire entity specification instead of only the first two words. (This requires giving the specification union a name.) So far, no driver actually uses more than two words, but this will be needed for ALSA entities. Signed-off-by: Clemens Ladisch [laurent.pinchart@ideasonboard.com: Rename specification to info] Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/media/media-entity.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/media-entity.h b/include/media/media-entity.h index cd8bca63a50..29e7bba78ff 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -98,7 +98,7 @@ struct media_entity { /* Sub-device specifications */ /* Nothing needed yet */ - }; + } info; }; static inline u32 media_entity_type(struct media_entity *entity) -- cgit v1.2.3-18-g5258 From 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 5 May 2011 15:39:25 -0300 Subject: [media] as3645a: Add driver for LED flash controller This patch adds the driver for the as3645a LED flash controller. This controller supports a high power led in flash and torch modes and an indicator light, sometimes also called privacy light. Signed-off-by: Laurent Pinchart Signed-off-by: Andy Shevchenko Signed-off-by: Nayden Kanchev Signed-off-by: Tuukka Toivonen Signed-off-by: Antti Koskipaa Signed-off-by: Stanimir Varbanov Signed-off-by: Vimarsh Zutshi Signed-off-by: Sakari Ailus Signed-off-by: Ivan T. Ivanov Signed-off-by: Mika Westerberg Signed-off-by: David Cohen Signed-off-by: Mauro Carvalho Chehab --- include/media/as3645a.h | 71 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 include/media/as3645a.h (limited to 'include/media') diff --git a/include/media/as3645a.h b/include/media/as3645a.h new file mode 100644 index 00000000000..5075496d2c9 --- /dev/null +++ b/include/media/as3645a.h @@ -0,0 +1,71 @@ +/* + * include/media/as3645a.h + * + * Copyright (C) 2008-2011 Nokia Corporation + * + * Contact: Laurent Pinchart + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __AS3645A_H__ +#define __AS3645A_H__ + +#include + +#define AS3645A_NAME "as3645a" +#define AS3645A_I2C_ADDR (0x60 >> 1) /* W:0x60, R:0x61 */ + +#define AS3645A_FLASH_TIMEOUT_MIN 100000 /* us */ +#define AS3645A_FLASH_TIMEOUT_MAX 850000 +#define AS3645A_FLASH_TIMEOUT_STEP 50000 + +#define AS3645A_FLASH_INTENSITY_MIN 200 /* mA */ +#define AS3645A_FLASH_INTENSITY_MAX_1LED 500 +#define AS3645A_FLASH_INTENSITY_MAX_2LEDS 400 +#define AS3645A_FLASH_INTENSITY_STEP 20 + +#define AS3645A_TORCH_INTENSITY_MIN 20 /* mA */ +#define AS3645A_TORCH_INTENSITY_MAX 160 +#define AS3645A_TORCH_INTENSITY_STEP 20 + +#define AS3645A_INDICATOR_INTENSITY_MIN 0 /* uA */ +#define AS3645A_INDICATOR_INTENSITY_MAX 10000 +#define AS3645A_INDICATOR_INTENSITY_STEP 2500 + +/* + * as3645a_platform_data - Flash controller platform data + * @set_power: Set power callback + * @vref: VREF offset (0=0V, 1=+0.3V, 2=-0.3V, 3=+0.6V) + * @peak: Inductor peak current limit (0=1.25A, 1=1.5A, 2=1.75A, 3=2.0A) + * @ext_strobe: True if external flash strobe can be used + * @flash_max_current: Max flash current (mA, <= AS3645A_FLASH_INTENSITY_MAX) + * @torch_max_current: Max torch current (mA, >= AS3645A_TORCH_INTENSITY_MAX) + * @timeout_max: Max flash timeout (us, <= AS3645A_FLASH_TIMEOUT_MAX) + */ +struct as3645a_platform_data { + int (*set_power)(struct v4l2_subdev *subdev, int on); + unsigned int vref; + unsigned int peak; + bool ext_strobe; + + /* Flash and torch currents and timeout limits */ + unsigned int flash_max_current; + unsigned int torch_max_current; + unsigned int timeout_max; +}; + +#endif /* __AS3645A_H__ */ -- cgit v1.2.3-18-g5258 From adddf86b4cf545b82e422a9897a377d7e55b50ee Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 4 Jan 2012 21:06:13 -0300 Subject: [media] cx25840: Add a flag to enable the CX23888 DIF to be enabled or not The CX23888 (HVR1850 and other new cards) contain a DIF which is responsible for demodulating the audio and video. It's built directly into the CX23888 PCIe bridge. It needs to be enabled and disabled on a per-card and per-input basis. We pass this flag from the cx23885 core driver to the sub-device when we need the cx25840 driver to enable/disable with the DIF correctly. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- include/media/cx25840.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/media') diff --git a/include/media/cx25840.h b/include/media/cx25840.h index 46d1a141208..783c5bdd63e 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -85,6 +85,7 @@ enum cx25840_video_input { CX25840_NONE1_CH3 = 0x800000c0, CX25840_SVIDEO_ON = 0x80000100, CX25840_COMPONENT_ON = 0x80000200, + CX25840_DIF_ON = 0x80000400, }; enum cx25840_audio_input { -- cgit v1.2.3-18-g5258 From 9a7f95ad1c946efdd7a7a72df27db738260a0fd8 Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Sat, 30 Apr 2011 03:01:40 -0300 Subject: [media] davinci vpbe: add dm365 VPBE display driver changes This patch implements the core additions to the display driver, mainly controlling the VENC and other encoders for dm365. This patch also includes addition of amplifier subdevice to the vpbe driver and interfacing with venc subdevice. Signed-off-by: Manjunath Hadli Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/davinci/vpbe.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/media') diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h index 8b11fb03798..8bc1b3c0e67 100644 --- a/include/media/davinci/vpbe.h +++ b/include/media/davinci/vpbe.h @@ -63,6 +63,7 @@ struct vpbe_output { * output basis. If per mode is needed, we may have to move this to * mode_info structure */ + enum v4l2_mbus_pixelcode if_params; }; /* encoder configuration info */ @@ -74,6 +75,15 @@ struct encoder_config_info { struct i2c_board_info board_info; }; +/*amplifier configuration info */ +struct amp_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + /* structure for defining vpbe display subsystem components */ struct vpbe_config { char module_name[32]; @@ -84,6 +94,8 @@ struct vpbe_config { /* external encoder information goes here */ int num_ext_encoders; struct encoder_config_info *ext_encoders; + /* amplifier information goes here */ + struct amp_config_info *amp; int num_outputs; /* Order is venc outputs followed by LCD and then external encoders */ struct vpbe_output *outputs; @@ -158,6 +170,8 @@ struct vpbe_device { struct v4l2_subdev **encoders; /* current encoder index */ int current_sd_index; + /* external amplifier v4l2 subdevice */ + struct v4l2_subdev *amp; struct mutex lock; /* device initialized */ int initialized; @@ -165,6 +179,8 @@ struct vpbe_device { struct clk *dac_clk; /* osd_device pointer */ struct osd_state *osd_device; + /* venc device pointer */ + struct venc_platform_data *venc_device; /* * fields below are accessed by users of vpbe_device. Not the * ones above -- cgit v1.2.3-18-g5258 From 194ed21925032b366e693373ba9bde62fbbf16ed Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Sat, 10 Sep 2011 02:19:55 -0300 Subject: [media] davinci vpbe: add VENC block changes to enable dm365 and dm355 This patch implements necessary changes for enabling dm365 and dm355 hardware for vpbe. The patch contains additional HD mode support for dm365 (720p60, 1080i30) and appropriate register modifications based on version numbers. VPBE_VERSION_2 = dm365 specific VPBE_VERSION_3 = dm355 specific Signed-off-by: Manjunath Hadli Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/davinci/vpbe_venc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/media') diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h index 426c205831a..6b57334f402 100644 --- a/include/media/davinci/vpbe_venc.h +++ b/include/media/davinci/vpbe_venc.h @@ -29,10 +29,14 @@ struct venc_platform_data { enum vpbe_version venc_type; + int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type, + int field); int (*setup_clock)(enum vpbe_enc_timings_type type, unsigned int mode); + int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode); /* Number of LCD outputs supported */ int num_lcd_outputs; + struct vpbe_if_params *lcd_if_params; }; enum venc_ioctls { -- cgit v1.2.3-18-g5258 From a08d2c727153dc6cea1d5d54a43fd7d69c1467c3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 31 Dec 2011 07:45:39 -0300 Subject: [media] pwc: Remove driver specific ioctls This stems from the v4l1 era, with v4l2 everything can be done with standardized v4l2 API calls. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- include/media/pwc-ioctl.h | 323 ---------------------------------------------- 1 file changed, 323 deletions(-) delete mode 100644 include/media/pwc-ioctl.h (limited to 'include/media') diff --git a/include/media/pwc-ioctl.h b/include/media/pwc-ioctl.h deleted file mode 100644 index 1ed1e616fe3..00000000000 --- a/include/media/pwc-ioctl.h +++ /dev/null @@ -1,323 +0,0 @@ -#ifndef PWC_IOCTL_H -#define PWC_IOCTL_H - -/* (C) 2001-2004 Nemosoft Unv. - (C) 2004-2006 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to . - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* This is pwc-ioctl.h belonging to PWC 10.0.10 - It contains structures and defines to communicate from user space - directly to the driver. - */ - -/* - Changes - 2001/08/03 Alvarado Added ioctl constants to access methods for - changing white balance and red/blue gains - 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE - 2003/12/13 Nemosft Unv. Some modifications to make interfacing to - PWCX easier - 2006/01/01 Luc Saillard Add raw format definition - */ - -/* These are private ioctl() commands, specific for the Philips webcams. - They contain functions not found in other webcams, and settings not - specified in the Video4Linux API. - - The #define names are built up like follows: - VIDIOC VIDeo IOCtl prefix - PWC Philps WebCam - G optional: Get - S optional: Set - ... the function - */ - -#include - -/* Enumeration of image sizes */ -#define PSZ_SQCIF 0x00 -#define PSZ_QSIF 0x01 -#define PSZ_QCIF 0x02 -#define PSZ_SIF 0x03 -#define PSZ_CIF 0x04 -#define PSZ_VGA 0x05 -#define PSZ_MAX 6 - - -/* The frame rate is encoded in the video_window.flags parameter using - the upper 16 bits, since some flags are defined nowadays. The following - defines provide a mask and shift to filter out this value. - This value can also be passing using the private flag when using v4l2 and - VIDIOC_S_FMT ioctl. - - In 'Snapshot' mode the camera freezes its automatic exposure and colour - balance controls. - */ -#define PWC_FPS_SHIFT 16 -#define PWC_FPS_MASK 0x00FF0000 -#define PWC_FPS_FRMASK 0x003F0000 -#define PWC_FPS_SNAPSHOT 0x00400000 -#define PWC_QLT_MASK 0x03000000 -#define PWC_QLT_SHIFT 24 - - -/* structure for transferring x & y coordinates */ -struct pwc_coord -{ - int x, y; /* guess what */ - int size; /* size, or offset */ -}; - - -/* Used with VIDIOCPWCPROBE */ -struct pwc_probe -{ - char name[32]; - int type; -}; - -struct pwc_serial -{ - char serial[30]; /* String with serial number. Contains terminating 0 */ -}; - -/* pwc_whitebalance.mode values */ -#define PWC_WB_INDOOR 0 -#define PWC_WB_OUTDOOR 1 -#define PWC_WB_FL 2 -#define PWC_WB_MANUAL 3 -#define PWC_WB_AUTO 4 - -/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). - Set mode to one of the PWC_WB_* values above. - *red and *blue are the respective gains of these colour components inside - the camera; range 0..65535 - When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; - otherwise undefined. - 'read_red' and 'read_blue' are read-only. -*/ -struct pwc_whitebalance -{ - int mode; - int manual_red, manual_blue; /* R/W */ - int read_red, read_blue; /* R/O */ -}; - -/* - 'control_speed' and 'control_delay' are used in automatic whitebalance mode, - and tell the camera how fast it should react to changes in lighting, and - with how much delay. Valid values are 0..65535. -*/ -struct pwc_wb_speed -{ - int control_speed; - int control_delay; - -}; - -/* Used with VIDIOCPWC[SG]LED */ -struct pwc_leds -{ - int led_on; /* Led on-time; range = 0..25000 */ - int led_off; /* Led off-time; range = 0..25000 */ -}; - -/* Image size (used with GREALSIZE) */ -struct pwc_imagesize -{ - int width; - int height; -}; - -/* Defines and structures for Motorized Pan & Tilt */ -#define PWC_MPT_PAN 0x01 -#define PWC_MPT_TILT 0x02 -#define PWC_MPT_TIMEOUT 0x04 /* for status */ - -/* Set angles; when absolute != 0, the angle is absolute and the - driver calculates the relative offset for you. This can only - be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns - absolute angles. - */ -struct pwc_mpt_angles -{ - int absolute; /* write-only */ - int pan; /* degrees * 100 */ - int tilt; /* degress * 100 */ -}; - -/* Range of angles of the camera, both horizontally and vertically. - */ -struct pwc_mpt_range -{ - int pan_min, pan_max; /* degrees * 100 */ - int tilt_min, tilt_max; -}; - -struct pwc_mpt_status -{ - int status; - int time_pan; - int time_tilt; -}; - - -/* This is used for out-of-kernel decompression. With it, you can get - all the necessary information to initialize and use the decompressor - routines in standalone applications. - */ -struct pwc_video_command -{ - int type; /* camera type (645, 675, 730, etc.) */ - int release; /* release number */ - - int size; /* one of PSZ_* */ - int alternate; - int command_len; /* length of USB video command */ - unsigned char command_buf[13]; /* Actual USB video command */ - int bandlength; /* >0 = compressed */ - int frame_size; /* Size of one (un)compressed frame */ -}; - -/* Flags for PWCX subroutines. Not all modules honour all flags. */ -#define PWCX_FLAG_PLANAR 0x0001 -#define PWCX_FLAG_BAYER 0x0008 - - -/* IOCTL definitions */ - - /* Restore user settings */ -#define VIDIOCPWCRUSER _IO('v', 192) - /* Save user settings */ -#define VIDIOCPWCSUSER _IO('v', 193) - /* Restore factory settings */ -#define VIDIOCPWCFACTORY _IO('v', 194) - - /* You can manipulate the compression factor. A compression preference of 0 - means use uncompressed modes when available; 1 is low compression, 2 is - medium and 3 is high compression preferred. Of course, the higher the - compression, the lower the bandwidth used but more chance of artefacts - in the image. The driver automatically chooses a higher compression when - the preferred mode is not available. - */ - /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ -#define VIDIOCPWCSCQUAL _IOW('v', 195, int) - /* Get preferred compression quality */ -#define VIDIOCPWCGCQUAL _IOR('v', 195, int) - - -/* Retrieve serial number of camera */ -#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) - - /* This is a probe function; since so many devices are supported, it - becomes difficult to include all the names in programs that want to - check for the enhanced Philips stuff. So in stead, try this PROBE; - it returns a structure with the original name, and the corresponding - Philips type. - To use, fill the structure with zeroes, call PROBE and if that succeeds, - compare the name with that returned from VIDIOCGCAP; they should be the - same. If so, you can be assured it is a Philips (OEM) cam and the type - is valid. - */ -#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) - - /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ -#define VIDIOCPWCSAGC _IOW('v', 200, int) - /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCGAGC _IOR('v', 200, int) - /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) - - /* Color compensation (Auto White Balance) */ -#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) -#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) - - /* Auto WB speed */ -#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) -#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) - - /* LEDs on/off/blink; int range 0..65535 */ -#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) -#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) - - /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ -#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) -#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) - - /* Backlight compensation; 0 = off, otherwise on */ -#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) -#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) - - /* Flickerless mode; = 0 off, otherwise on */ -#define VIDIOCPWCSFLICKER _IOW('v', 208, int) -#define VIDIOCPWCGFLICKER _IOR('v', 208, int) - - /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ -#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) -#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) - - /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ -#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) - - /* Motorized pan & tilt functions */ -#define VIDIOCPWCMPTRESET _IOW('v', 211, int) -#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) -#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) - - /* Get the USB set-video command; needed for initializing libpwcx */ -#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) -struct pwc_table_init_buffer { - int len; - char *buffer; - -}; -#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) - -/* - * This is private command used when communicating with v4l2. - * In the future all private ioctl will be remove/replace to - * use interface offer by v4l2. - */ - -#define V4L2_CID_PRIVATE_SAVE_USER (V4L2_CID_PRIVATE_BASE + 0) -#define V4L2_CID_PRIVATE_RESTORE_USER (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_PRIVATE_COLOUR_MODE (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_PRIVATE_AUTOCONTOUR (V4L2_CID_PRIVATE_BASE + 4) -#define V4L2_CID_PRIVATE_CONTOUR (V4L2_CID_PRIVATE_BASE + 5) -#define V4L2_CID_PRIVATE_BACKLIGHT (V4L2_CID_PRIVATE_BASE + 6) -#define V4L2_CID_PRIVATE_FLICKERLESS (V4L2_CID_PRIVATE_BASE + 7) -#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8) - -struct pwc_raw_frame { - __le16 type; /* type of the webcam */ - __le16 vbandlength; /* Size of 4lines compressed (used by the decompressor) */ - __u8 cmd[4]; /* the four byte of the command (in case of nala, - only the first 3 bytes is filled) */ - __u8 rawframe[0]; /* frame_size = H/4*vbandlength */ -} __attribute__ ((packed)); - - -#endif -- cgit v1.2.3-18-g5258 From 8843d119eaf1a7a87a2cf8c3eadbd1937b16bc27 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 21 Sep 2011 17:52:51 -0300 Subject: [media] soc-camera: remove redundant parameter from .set_bus_param() The "pixfmt" parameter of the struct soc_camera_host_ops::set_bus_param() method is redundant, because at the time, when this method is called, pixfmt is guaranteed to be equal to icd->current_fmt->host_fmt->fourcc. Remove this parameter and update all drivers accordingly. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- include/media/soc_camera.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 5fb2c3d10c0..b5c2b6cb0d8 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -94,7 +94,7 @@ struct soc_camera_host_ops { struct soc_camera_device *); int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *); int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); - int (*set_bus_param)(struct soc_camera_device *, __u32); + int (*set_bus_param)(struct soc_camera_device *); int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *); int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *); -- cgit v1.2.3-18-g5258 From d8ec0961ce5a9ddbece875c2b6fc028cb750df3a Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 8 Dec 2011 07:18:49 -0300 Subject: [media] atmel-isi: add code to enable/disable ISI_MCK clock This patch - add ISI_MCK clock enable/disable code. - change field name in isi_platform_data structure Signed-off-by: Josh Wu [g.liakhovetski@gmx.de: fix label names] Signed-off-by: Guennadi Liakhovetski Acked-by: Nicolas Ferre Signed-off-by: Mauro Carvalho Chehab --- include/media/atmel-isi.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h index 26cece59512..65682307570 100644 --- a/include/media/atmel-isi.h +++ b/include/media/atmel-isi.h @@ -110,10 +110,12 @@ struct isi_platform_data { u8 hsync_act_low; u8 vsync_act_low; u8 pclk_act_falling; - u8 isi_full_mode; + u8 full_mode; u32 data_width_flags; /* Using for ISI_CFG1 */ u32 frate; + /* Using for ISI_MCK */ + u32 mck_hz; }; #endif /* __ATMEL_ISI_H__ */ -- cgit v1.2.3-18-g5258 From 0e8caaceff160ad821c83d798fc03812cb810560 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 10 Aug 2011 10:37:47 -0300 Subject: [media] v4l: add support for selection api This patch introduces new api for a precise control of cropping and composing features for video devices. The new ioctls are VIDIOC_S_SELECTION and VIDIOC_G_SELECTION. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-ioctl.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/media') diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 4d1c74ad4c8..3f5d60fc5df 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -196,6 +196,10 @@ struct v4l2_ioctl_ops { struct v4l2_crop *a); int (*vidioc_s_crop) (struct file *file, void *fh, struct v4l2_crop *a); + int (*vidioc_g_selection) (struct file *file, void *fh, + struct v4l2_selection *s); + int (*vidioc_s_selection) (struct file *file, void *fh, + struct v4l2_selection *s); /* Compression ioctls */ int (*vidioc_g_jpegcomp) (struct file *file, void *fh, struct v4l2_jpegcompression *a); -- cgit v1.2.3-18-g5258 From 0963119fca6ad250146fd7d27eb90f205e188beb Mon Sep 17 00:00:00 2001 From: Samuel Rakitnican Date: Fri, 6 Jan 2012 17:34:53 -0300 Subject: [media] rc-videomate-m1f.c Rename to match remote controler name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This remote was added with support for card Compro VideoMate M1F. This remote is shipped with various Compro cards, not this one only. Furthermore this remote can be bought separately under name Compro VideoMate K100. http://compro.com.tw/en/product/k100/k100.html So give it a proper name. [mchehab@redhat.com: Fix the Makefile] Signed-off-by: Samuel Rakitničan Signed-off-by: Mauro Carvalho Chehab --- include/media/rc-map.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/media') diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 183d701eb3c..f688bde6122 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -147,7 +147,7 @@ void rc_map_init(void); #define RC_MAP_TREKSTOR "rc-trekstor" #define RC_MAP_TT_1500 "rc-tt-1500" #define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027" -#define RC_MAP_VIDEOMATE_M1F "rc-videomate-m1f" +#define RC_MAP_VIDEOMATE_K100 "rc-videomate-k100" #define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350" #define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" #define RC_MAP_WINFAST "rc-winfast" -- cgit v1.2.3-18-g5258