From 5e41486c408eb4206aee09303631427f57771691 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 23 May 2008 20:38:56 +0400 Subject: powerpc/QE: add support for QE USB clocks routing This patch adds a function to the qe_lib to setup QE USB clocks routing. To setup clocks safely, cmxgcr register needs locking, so I just reused ucc_lock since it was used only to protect cmxgcr. The idea behind placing clocks routing functions into the qe_lib is that later we'll hopefully switch to the generic Linux Clock API, thus, for example, FHCI driver may be used for QE and CPM chips without nasty #ifdefs. This patch also fixes QE_USB_RESTART_TX command definition in the qe.h. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index c3be6e2e149..d217288ec6b 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -16,6 +16,7 @@ #define _ASM_POWERPC_QE_H #ifdef __KERNEL__ +#include #include #define QE_NUM_OF_SNUM 28 @@ -74,6 +75,13 @@ enum qe_clock { QE_CLK_DUMMY }; +static inline bool qe_clock_is_brg(enum qe_clock clk) +{ + return clk >= QE_BRG1 && clk <= QE_BRG16; +} + +extern spinlock_t cmxgcr_lock; + /* Export QE common operations */ extern void qe_reset(void); extern int par_io_init(struct device_node *np); @@ -156,6 +164,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware); /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); +/* QE USB */ +int qe_usb_clock_set(enum qe_clock clk, int rate); + /* Buffer descriptors */ struct qe_bd { __be16 status; @@ -254,6 +265,16 @@ enum comm_dir { #define QE_CMXGCR_MII_ENET_MNG 0x00007000 #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXGCR_USBCS 0x0000000f +#define QE_CMXGCR_USBCS_CLK3 0x1 +#define QE_CMXGCR_USBCS_CLK5 0x2 +#define QE_CMXGCR_USBCS_CLK7 0x3 +#define QE_CMXGCR_USBCS_CLK9 0x4 +#define QE_CMXGCR_USBCS_CLK13 0x5 +#define QE_CMXGCR_USBCS_CLK17 0x6 +#define QE_CMXGCR_USBCS_CLK19 0x7 +#define QE_CMXGCR_USBCS_CLK21 0x8 +#define QE_CMXGCR_USBCS_BRG9 0x9 +#define QE_CMXGCR_USBCS_BRG10 0xa /* QE CECR Commands. */ @@ -283,7 +304,7 @@ enum comm_dir { #define QE_HPAC_START_TX 0x0000060b #define QE_HPAC_START_RX 0x0000070b #define QE_USB_STOP_TX 0x0000000a -#define QE_USB_RESTART_TX 0x0000000b +#define QE_USB_RESTART_TX 0x0000000c #define QE_QMC_STOP_TX 0x0000000c #define QE_QMC_STOP_RX 0x0000000d #define QE_SS7_SU_FIL_RESET 0x0000000e -- cgit v1.2.3-18-g5258 From 9572653ee01a2134ae3a1d7aa29ce9d026a6afe9 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 23 May 2008 20:38:58 +0400 Subject: powerpc/QE: prepare QE PIO code for GPIO LIB support - split and export __par_io_config_pin() out of par_io_config_pin(), so we could use the prefixed version with GPIO LIB API; - rename struct port_regs to qe_pio_regs, and place it into qe.h; - rename #define NUM_OF_PINS to QE_PIO_PINS, and place it into qe.h. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index d217288ec6b..c4523acad48 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -84,8 +84,27 @@ extern spinlock_t cmxgcr_lock; /* Export QE common operations */ extern void qe_reset(void); + +/* QE PIO */ +#define QE_PIO_PINS 32 + +struct qe_pio_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif +}; + extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); +extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, + int dir, int open_drain, int assignment, + int has_irq); extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, int assignment, int has_irq); extern int par_io_data_set(u8 port, u8 pin, u8 val); -- cgit v1.2.3-18-g5258 From 32def337aafee0bc65eb58d5b1b3617525eb7fb7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 19 May 2008 21:47:05 +0400 Subject: powerpc/QE: implement support for the GPIO LIB API This is needed to access QE GPIOs via Linux GPIO API. Signed-off-by: Anton Vorontsov Acked-By: Timur Tabi Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index c4523acad48..01e3c70b93a 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -100,8 +100,11 @@ struct qe_pio_regs { #endif }; +extern void __init qe_add_gpiochips(void); extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); +#define QE_PIO_DIR_IN 2 +#define QE_PIO_DIR_OUT 1 extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir, int open_drain, int assignment, int has_irq); -- cgit v1.2.3-18-g5258 From 5093bb965a163fe288c3e5db0275165f86c895c2 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 23 May 2008 20:39:06 +0400 Subject: powerpc/QE: switch to the cpm_muram implementation This is very trivial patch. We're transitioning to the cpm_muram_* calls. That's it. Less trivial changes: - BD_SC_* defines were defined in the cpm.h and qe.h, so to avoid redefines we remove BD_SC from the qe.h and use cpm.h along with cpm_muram_* prototypes; - qe_muram_dump was unused and thus removed; - added some code to the cpm_common.c to support legacy QE bindings (data-only node name). - For convenience, define qe_* calls to cpm_*. So drivers need not to be changed. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 36 ++++++++---------------------------- 1 file changed, 8 insertions(+), 28 deletions(-) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 01e3c70b93a..80807fd6a70 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -17,6 +17,7 @@ #ifdef __KERNEL__ #include +#include #include #define QE_NUM_OF_SNUM 28 @@ -119,20 +120,13 @@ unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); -unsigned long qe_muram_alloc(int size, int align); -int qe_muram_free(unsigned long offset); -unsigned long qe_muram_alloc_fixed(unsigned long offset, int size); -void qe_muram_dump(void); - -static inline void __iomem *qe_muram_addr(unsigned long offset) -{ - return (void __iomem *)&qe_immr->muram[offset]; -} - -static inline unsigned long qe_muram_offset(void __iomem *addr) -{ - return addr - (void __iomem *)qe_immr->muram; -} +/* we actually use cpm_muram implementation, define this for convenience */ +#define qe_muram_init cpm_muram_init +#define qe_muram_alloc cpm_muram_alloc +#define qe_muram_alloc_fixed cpm_muram_alloc_fixed +#define qe_muram_free cpm_muram_free +#define qe_muram_addr cpm_muram_addr +#define qe_muram_offset cpm_muram_offset /* Structure that defines QE firmware binary files. * @@ -199,20 +193,6 @@ struct qe_bd { #define BD_STATUS_MASK 0xffff0000 #define BD_LENGTH_MASK 0x0000ffff -#define BD_SC_EMPTY 0x8000 /* Receive is empty */ -#define BD_SC_READY 0x8000 /* Transmit is ready */ -#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */ -#define BD_SC_INTRPT 0x1000 /* Interrupt on change */ -#define BD_SC_LAST 0x0800 /* Last buffer in frame */ -#define BD_SC_CM 0x0200 /* Continous mode */ -#define BD_SC_ID 0x0100 /* Rec'd too many idles */ -#define BD_SC_P 0x0100 /* xmt preamble */ -#define BD_SC_BR 0x0020 /* Break received */ -#define BD_SC_FR 0x0010 /* Framing error */ -#define BD_SC_PR 0x0008 /* Parity error */ -#define BD_SC_OV 0x0002 /* Overrun */ -#define BD_SC_CD 0x0001 /* ?? */ - /* Alignment */ #define QE_INTR_TABLE_ALIGN 16 /* ??? */ #define QE_ALIGNMENT_OF_BD 8 -- cgit v1.2.3-18-g5258 From 5848f16947026601b9cb4df694bb9f44dfefc354 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 11 Jun 2008 16:32:48 +0400 Subject: powerpc/QE: qe_reset should be __init This patch fixes following section mismatch: WARNING: arch/powerpc/sysdev/built-in.o(.text+0x11d8): Section mismatch in reference from the function qe_reset() to the function .init.text:cpm_muram_init() Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 80807fd6a70..1355e726701 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -84,7 +84,7 @@ static inline bool qe_clock_is_brg(enum qe_clock clk) extern spinlock_t cmxgcr_lock; /* Export QE common operations */ -extern void qe_reset(void); +extern void __init qe_reset(void); /* QE PIO */ #define QE_PIO_PINS 32 -- cgit v1.2.3-18-g5258 From d14b3dd6190af7ce4f88be68f8df828af6d44584 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 12 Jun 2008 03:42:14 +0400 Subject: powerpc/QE: use arch_initcall to probe QUICC Engine GPIOs It was discussed that global arch_initcall() is preferred way to probe QE GPIOs, so let's use it. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- include/asm-powerpc/qe.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/asm-powerpc/qe.h') diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 1355e726701..edee15d269e 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -101,7 +101,6 @@ struct qe_pio_regs { #endif }; -extern void __init qe_add_gpiochips(void); extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); #define QE_PIO_DIR_IN 2 -- cgit v1.2.3-18-g5258