From 2368086344c3d67b0f4aecac39d620fb9b8795c3 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Tue, 21 Jun 2005 17:16:10 -0700 Subject: [PATCH] m32r: Support M3A-2170(Mappi-III) platform This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III) evaluation board. An M32R chip multiprocessor is equipped on the board. http://http://www.linux-m32r.org/eng/platform/platform.html * arch/m32r/Kconfig: Support Mappi-III platform. * arch/m32r/kernel/Makefile: ditto. * arch/m32r/kernel/io_mappi3.c: ditto. * arch/m32r/kernel/setup.c: ditto. * arch/m32r/kernel/setup_mappi3.c: ditto. * include/asm-m32r/m32102.h: ditto. * include/asm-m32r/m32r.h: ditto. * include/asm-m32r/mappi3/mappi3_pld.h: ditto. * include/asm-m32r/ide.h: CF support for Mappi-III. * arch/m32r/kernel/setup_mappi3.c: ditto. * arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III. * arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III. * arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III, on the contrary it makes MMU on for Mappi-II. * arch/m32r/kernel/io_mappi2.c: Update comments. * arch/m32r/kernel/setup_mappi2.c: ditto. Signed-off-by: Mamoru Sakugawa Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-m32r/ide.h | 2 +- include/asm-m32r/m32102.h | 1 + include/asm-m32r/m32r.h | 4 + include/asm-m32r/mappi3/mappi3_pld.h | 143 +++++++++++++++++++++++++++++++++++ 4 files changed, 149 insertions(+), 1 deletion(-) create mode 100644 include/asm-m32r/mappi3/mappi3_pld.h (limited to 'include/asm-m32r') diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h index be64f24e37e..194393bd8be 100644 --- a/include/asm-m32r/ide.h +++ b/include/asm-m32r/ide.h @@ -35,7 +35,7 @@ static __inline__ int ide_default_irq(unsigned long base) { switch (base) { -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3) case 0x1f0: return PLD_IRQ_CFIREQ; default: return 0; diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h index b56034026bf..cb98101f4f6 100644 --- a/include/asm-m32r/m32102.h +++ b/include/asm-m32r/m32102.h @@ -175,6 +175,7 @@ #define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ #define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ #define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */ #define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */ #define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */ #define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */ diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h index f116649bbef..fd2b2823762 100644 --- a/include/asm-m32r/m32r.h +++ b/include/asm-m32r/m32r.h @@ -36,6 +36,10 @@ #include #endif /* CONFIG_PLAT_MAPPI2 */ +#if defined(CONFIG_PLAT_MAPPI3) +#include +#endif /* CONFIG_PLAT_MAPPI3 */ + #if defined(CONFIG_PLAT_USRV) #include #endif diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h new file mode 100644 index 00000000000..3f1551f7f01 --- /dev/null +++ b/include/asm-m32r/mappi3/mappi3_pld.h @@ -0,0 +1,143 @@ +/* + * include/asm/mappi3/mappi3_pld.h + * + * Definitions for Extended IO Logic on MAPPI3 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + */ + +#ifndef _MAPPI3_PLD_H +#define _MAPPI3_PLD_H + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + + +/*==== ICU ====*/ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (8) /* INT7 CFC Card Eject */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ + + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +#endif /* _MAPPI3_PLD.H */ -- cgit v1.2.3-18-g5258