From 59d1ff3bfb56d9b8cf3ec864857e6a4dfd9d2dba Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 9 Nov 2005 15:04:22 +0000 Subject: [ARM] Clean up save_and_disable_irqs macro and allow use of ARMv6 CPSID save_and_disable_irqs does not need to use mov + msr (which was introduced to work around a documentation bug which was propagated into binutils.) Use msr with an immediate constant, and if we're building for ARMv6 or later, use the new CPSID instruction. Signed-off-by: Russell King --- include/asm-arm/assembler.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/asm-arm/assembler.h') diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h index 69a28f96bee..f31ac92b6c7 100644 --- a/include/asm-arm/assembler.h +++ b/include/asm-arm/assembler.h @@ -83,10 +83,13 @@ * Save the current IRQ state and disable IRQs. Note that this macro * assumes FIQs are enabled, and that the processor is in SVC mode. */ - .macro save_and_disable_irqs, oldcpsr, temp + .macro save_and_disable_irqs, oldcpsr mrs \oldcpsr, cpsr - mov \temp, #PSR_I_BIT | MODE_SVC - msr cpsr_c, \temp +#if __LINUX_ARM_ARCH__ >= 6 + cpsid i +#else + msr cpsr_c, #PSR_I_BIT | MODE_SVC +#endif .endm /* -- cgit v1.2.3-18-g5258