From ff4bfb2163e8914332267be3758eb28239460316 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 26 Apr 2007 08:26:13 +0100 Subject: [ARM] 4328/1: Move i.MX UART regs to driver This patch moves the i.MX UART register descriptions from include/asm-arm/arch-imx/imx-regs.h to the serial driver itself. This helps using the driver on other architectures like mx31 Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- include/asm-arm/arch-imx/imx-regs.h | 118 ------------------------------------ 1 file changed, 118 deletions(-) (limited to 'include/asm-arm/arch-imx') diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index e56a4e247d6..de6494a4dc6 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -477,122 +477,4 @@ #define LCDISR_EOF (1<<1) #define LCDISR_BOF (1<<0) -/* - * UART Module. Takes the UART base address as argument - */ -#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */ -#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */ -#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */ -#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */ -#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */ -#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */ -#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */ -#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */ -#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */ -#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */ -#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */ -#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */ -#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */ -#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */ -#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */ -#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */ -#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */ -#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */ -#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */ -#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */ -#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */ -#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */ -#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - #endif // _IMX_REGS_H -- cgit v1.2.3-18-g5258