From 14d87e6c399f3942d63dff41447ff08a615d9a6b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Jul 2009 10:28:19 -0700 Subject: sparc: Fix cleanup crash in bbc_envctrl_cleanup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If kthread_run() fails or never gets to run we'll have NULL or a pointer encoded error in kenvctrld_task, rather than a legitimate task pointer. So this makes bbc_envctrl_cleanup() crash as it passed this bogus pointer into kthread_stop(). Reported-by: BERTRAND Joël Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_envctrl.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c index 15dab96d05e..7c815d3327f 100644 --- a/drivers/sbus/char/bbc_envctrl.c +++ b/drivers/sbus/char/bbc_envctrl.c @@ -537,8 +537,12 @@ int bbc_envctrl_init(struct bbc_i2c_bus *bp) } if (temp_index != 0 && fan_index != 0) { kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); - if (IS_ERR(kenvctrld_task)) - return PTR_ERR(kenvctrld_task); + if (IS_ERR(kenvctrld_task)) { + int err = PTR_ERR(kenvctrld_task); + + kenvctrld_task = NULL; + return err; + } } return 0; @@ -561,7 +565,8 @@ void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp) struct bbc_cpu_temperature *tp, *tpos; struct bbc_fan_control *fp, *fpos; - kthread_stop(kenvctrld_task); + if (kenvctrld_task) + kthread_stop(kenvctrld_task); list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) { list_del(&tp->bp_list); -- cgit v1.2.3-18-g5258 From ec8b4b7085605e801a7740a2c3c33256aebe249c Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Wed, 12 Aug 2009 01:12:08 -0700 Subject: Input: joydev - decouple axis and button map ioctls from input constants The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: Stephen Kitt Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 68 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 41 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 4cfd084fa89..9a1d55b74d7 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -456,8 +456,11 @@ static int joydev_ioctl_common(struct joydev *joydev, unsigned int cmd, void __user *argp) { struct input_dev *dev = joydev->handle.dev; + size_t len; int i, j; + const char *name; + /* Process fixed-sized commands. */ switch (cmd) { case JS_SET_CAL: @@ -499,9 +502,22 @@ static int joydev_ioctl_common(struct joydev *joydev, return copy_to_user(argp, joydev->corr, sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0; - case JSIOCSAXMAP: - if (copy_from_user(joydev->abspam, argp, - sizeof(__u8) * (ABS_MAX + 1))) + } + + /* + * Process variable-sized commands (the axis and button map commands + * are considered variable-sized to decouple them from the values of + * ABS_MAX and KEY_MAX). + */ + switch (cmd & ~IOCSIZE_MASK) { + + case (JSIOCSAXMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); + /* + * FIXME: we should not copy into our axis map before + * validating the data. + */ + if (copy_from_user(joydev->abspam, argp, len)) return -EFAULT; for (i = 0; i < joydev->nabs; i++) { @@ -511,13 +527,17 @@ static int joydev_ioctl_common(struct joydev *joydev, } return 0; - case JSIOCGAXMAP: - return copy_to_user(argp, joydev->abspam, - sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0; - - case JSIOCSBTNMAP: - if (copy_from_user(joydev->keypam, argp, - sizeof(__u16) * (KEY_MAX - BTN_MISC + 1))) + case (JSIOCGAXMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); + return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0; + + case (JSIOCSBTNMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); + /* + * FIXME: we should not copy into our keymap before + * validating the data. + */ + if (copy_from_user(joydev->keypam, argp, len)) return -EFAULT; for (i = 0; i < joydev->nkey; i++) { @@ -529,25 +549,19 @@ static int joydev_ioctl_common(struct joydev *joydev, return 0; - case JSIOCGBTNMAP: - return copy_to_user(argp, joydev->keypam, - sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0; + case (JSIOCGBTNMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); + return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0; - default: - if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) { - int len; - const char *name = dev->name; - - if (!name) - return 0; - len = strlen(name) + 1; - if (len > _IOC_SIZE(cmd)) - len = _IOC_SIZE(cmd); - if (copy_to_user(argp, name, len)) - return -EFAULT; - return len; - } + case JSIOCGNAME(0): + name = dev->name; + if (!name) + return 0; + + len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1); + return copy_to_user(argp, name, len) ? -EFAULT : len; } + return -EINVAL; } -- cgit v1.2.3-18-g5258 From c9a2bfd1f08973115c2fc3da9372e0e81ac42a19 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 14 Aug 2009 13:09:32 -0700 Subject: pcmcia: add CNF-CDROM-ID for ide Fixes this report: http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/ Reported-by: John McGrath Signed-off-by: Wolfram Sang Signed-off-by: David S. Miller --- drivers/ide/ide-cs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 527908ff298..063b933d864 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -408,6 +408,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), + PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), -- cgit v1.2.3-18-g5258 From c5e7f5a38a7ebf3697281bc7cb494e676f287ac0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 3 Jun 2009 13:05:48 +0200 Subject: [WATCHDOG] ar7_wdt: fix path to ar7-specific headers AR7 is currently being resubmitted for mainline inclusion and we changed the path to the ar7-specific headers from ar7 to mach-ar7 to reflect the other MIPS-based boards header hierarchy. This patch will avoid any future compilation failure due to missing headers. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ar7_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 3fe9742c23c..2f8643efe92 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -37,7 +37,7 @@ #include #include -#include +#include #define DRVNAME "ar7_wdt" #define LONGNAME "TI AR7 Watchdog Timer" -- cgit v1.2.3-18-g5258 From 518ff04fd84290a7ad9042e8a46d78d29cb443d3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 17 Aug 2009 12:09:26 -0400 Subject: orinoco: correct key bounds check in orinoco_hw_get_tkip_iv If key is 4 that is an array out of bounds. Reported-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 632fac86a30..b3946272c72 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -70,7 +70,7 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) int err = 0; u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; - if ((key < 0) || (key > 4)) + if ((key < 0) || (key >= 4)) return -EINVAL; err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, -- cgit v1.2.3-18-g5258 From e7a5965a81a29a13cd4994fa23a6a7a1488bcdb6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 18 Aug 2009 20:21:40 -0700 Subject: yellowfin: Fix buffer underrun after dev_alloc_skb() failure yellowfin_init_ring() needs to clean up if dev_alloc_skb() fails and should pass an error status up to the caller. This also prevents an buffer underrun if failure occurred in the first iteration. yellowfin_open() which calls yellowfin_init_ring() should free its requested irq upon failure. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/yellowfin.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index a07580138e8..c2fd6187773 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -346,7 +346,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int yellowfin_open(struct net_device *dev); static void yellowfin_timer(unsigned long data); static void yellowfin_tx_timeout(struct net_device *dev); -static void yellowfin_init_ring(struct net_device *dev); +static int yellowfin_init_ring(struct net_device *dev); static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev); static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance); static int yellowfin_rx(struct net_device *dev); @@ -573,19 +573,24 @@ static int yellowfin_open(struct net_device *dev) { struct yellowfin_private *yp = netdev_priv(dev); void __iomem *ioaddr = yp->base; - int i; + int i, ret; /* Reset the chip. */ iowrite32(0x80000000, ioaddr + DMACtrl); - i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev); - if (i) return i; + ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev); + if (ret) + return ret; if (yellowfin_debug > 1) printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n", dev->name, dev->irq); - yellowfin_init_ring(dev); + ret = yellowfin_init_ring(dev); + if (ret) { + free_irq(dev->irq, dev); + return ret; + } iowrite32(yp->rx_ring_dma, ioaddr + RxPtr); iowrite32(yp->tx_ring_dma, ioaddr + TxPtr); @@ -725,10 +730,10 @@ static void yellowfin_tx_timeout(struct net_device *dev) } /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void yellowfin_init_ring(struct net_device *dev) +static int yellowfin_init_ring(struct net_device *dev) { struct yellowfin_private *yp = netdev_priv(dev); - int i; + int i, j; yp->tx_full = 0; yp->cur_rx = yp->cur_tx = 0; @@ -753,6 +758,11 @@ static void yellowfin_init_ring(struct net_device *dev) yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev, skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); } + if (i != RX_RING_SIZE) { + for (j = 0; j < i; j++) + dev_kfree_skb(yp->rx_skbuff[j]); + return -ENOMEM; + } yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP); yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); @@ -769,8 +779,6 @@ static void yellowfin_init_ring(struct net_device *dev) yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS); #else { - int j; - /* Tx ring needs a pair of descriptors, the second for the status. */ for (i = 0; i < TX_RING_SIZE; i++) { j = 2*i; @@ -805,7 +813,7 @@ static void yellowfin_init_ring(struct net_device *dev) } #endif yp->tx_tail_desc = &yp->tx_status[0]; - return; + return 0; } static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev) -- cgit v1.2.3-18-g5258 From 456d8991a795ff5e44dbc1c2a7f8d5b4ed675866 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Tue, 18 Aug 2009 23:34:58 -0700 Subject: net: Rename MAC platform driver for w90p910 platform Due to I modified the corresponding platform device name, so I make the patch to rename MAC platform driver for w90p910 platform. Signed-off-by: Wan ZongShun Signed-off-by: David S. Miller --- drivers/net/arm/w90p910_ether.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c index 616fb7985a3..ddd231cb54b 100644 --- a/drivers/net/arm/w90p910_ether.c +++ b/drivers/net/arm/w90p910_ether.c @@ -1080,7 +1080,7 @@ static struct platform_driver w90p910_ether_driver = { .probe = w90p910_ether_probe, .remove = __devexit_p(w90p910_ether_remove), .driver = { - .name = "w90p910-emc", + .name = "nuc900-emc", .owner = THIS_MODULE, }, }; @@ -1101,5 +1101,5 @@ module_exit(w90p910_ether_exit); MODULE_AUTHOR("Wan ZongShun "); MODULE_DESCRIPTION("w90p910 MAC driver!"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:w90p910-emc"); +MODULE_ALIAS("platform:nuc900-emc"); -- cgit v1.2.3-18-g5258 From f833bab87fca5c3ce13778421b1365845843b976 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 17 Aug 2009 14:34:59 -0700 Subject: clockevent: Prevent dead lock on clockevents_lock Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi Cc: "Pallipadi Venkatesh" Cc: "Brown Len" LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner --- drivers/acpi/processor_idle.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0efa59e7e3a..66393d5c4c7 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -162,8 +162,9 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr, pr->power.timer_broadcast_on_state = state; } -static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) +static void lapic_timer_propagate_broadcast(void *arg) { + struct acpi_processor *pr = (struct acpi_processor *) arg; unsigned long reason; reason = pr->power.timer_broadcast_on_state < INT_MAX ? @@ -635,7 +636,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) working++; } - lapic_timer_propagate_broadcast(pr); + smp_call_function_single(pr->id, lapic_timer_propagate_broadcast, + pr, 1); return (working); } -- cgit v1.2.3-18-g5258 From cbb35f8a2858f7e0fff5df598cb286c4bcae5976 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Aug 2009 12:13:31 -0700 Subject: net: fix ks8851 build errors Fix build errors due to missing Kconfig select of CRC32: ks8851.c:(.text+0x7d2ee): undefined reference to `crc32_le' ks8851.c:(.text+0x7d2f5): undefined reference to `bitrev32' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5f6509a5f64..7a90e7ce5a9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1733,6 +1733,7 @@ config KS8851 tristate "Micrel KS8851 SPI" depends on SPI select MII + select CRC32 help SPI driver for Micrel KS8851 SPI attached network chip. -- cgit v1.2.3-18-g5258 From 68947b8f9a36f7f7f54ca95e0c6e169bb603e803 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 19 Aug 2009 22:07:44 -0700 Subject: Input: iforce - support new revision of ACT LABS Force RS Reported-by: cemede@gmail.com Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 1 + drivers/input/joystick/iforce/iforce-usb.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index baabf830264..f6c688cae33 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -74,6 +74,7 @@ static struct iforce_device iforce_device[] = { { 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce }, { 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //? { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? + { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index f83185aeb51..9f289d8f52c 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -223,6 +223,7 @@ static struct usb_device_id iforce_usb_ids [] = { { USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */ { USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */ { USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */ + { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */ { USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */ { USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */ { USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */ -- cgit v1.2.3-18-g5258 From d3b325f9c25be6d504bc73afce7f92d0e25001d7 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Thu, 20 Aug 2009 02:21:27 -0700 Subject: ibm_newemac: emac_close() needs to call netif_carrier_off() When ibm_newemac netdev instance is shutdown with "ifconfig down", the netdev interface does not go properly down. netif_carrier_ok() keeps returning TRUE even after "ifconfig down". The problem can be seen when ibm_newemac instances are slaves of a bonding interface. The bonding interface code uses netif_carrier_ok() to determine the link status of its slaves. When ibm_newemac slave is shutdown with "ifconfig down", the bonding interface won't detect any link status change because netif_carrier_ok() keeps returning TRUE. Signed-off-by: Petri Gynther Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index beb84213b67..f0f89080371 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1305,6 +1305,8 @@ static int emac_close(struct net_device *ndev) free_irq(dev->emac_irq, dev); + netif_carrier_off(ndev); + return 0; } -- cgit v1.2.3-18-g5258 From 3b7307c2d66dd575ef24b88898b4bc4bddb254f4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 20 Aug 2009 21:41:04 -0700 Subject: Input: wacom - don't use on-stack memory for report buffers Tested-by: Martin Capitanio Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 43 +++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index a9d5031b855..ea30c983a33 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -388,6 +388,32 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi return result; } +static int wacom_query_tablet_data(struct usb_interface *intf) +{ + unsigned char *rep_data; + int limit = 0; + int error; + + rep_data = kmalloc(2, GFP_KERNEL); + if (!rep_data) + return -ENOMEM; + + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + + kfree(rep_data); + + return error < 0 ? error : 0; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -398,7 +424,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; - char rep_data[2], limit = 0; struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); @@ -489,20 +514,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i /* * Ask the tablet to report tablet data if it is not a Tablet PC. - * Repeat until it succeeds + * Note that if query fails it is not a hard failure. */ - if (wacom_wac->features->type != TABLETPC) { - do { - rep_data[0] = 2; - rep_data[1] = 2; - error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - 2, rep_data, 2); - if (error >= 0) - error = usb_get_report(intf, - WAC_HID_FEATURE_REPORT, 2, - rep_data, 2); - } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); - } + if (wacom_wac->features->type != TABLETPC) + wacom_query_tablet_data(intf); usb_set_intfdata(intf, wacom); return 0; -- cgit v1.2.3-18-g5258 From 1700f5fde88f9a251037bc86bde538ee32c59905 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Aug 2009 22:05:53 -0700 Subject: Input: ucb1400_ts - enable ADC Filter This patch enables ADC filtering on UCB1400 codec by default. The benefit from this change is mostly on some Colibri boards where the ADCSYNC pin of the UCB1400 codec isn't connected causing the touchscreen to jitter very badly. This change has no visible effect on boards where the ADCSYNC pin is connected. Signed-off-by: Marek Vasut Tested-by: Palo Revak Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 6954f550010..3b345f9cf0c 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -345,6 +345,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) static int ucb1400_ts_probe(struct platform_device *dev) { int error, x_res, y_res; + u16 fcsr; struct ucb1400_ts *ucb = dev->dev.platform_data; ucb->ts_idev = input_allocate_device(); @@ -382,6 +383,14 @@ static int ucb1400_ts_probe(struct platform_device *dev) ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + /* + * Enable ADC filter to prevent horrible jitter on Colibri. + * This also further reduces jitter on boards where ADCSYNC + * pin is connected. + */ + fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR); + ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE); + ucb1400_adc_enable(ucb->ac97); x_res = ucb1400_ts_read_xres(ucb); y_res = ucb1400_ts_read_yres(ucb); -- cgit v1.2.3-18-g5258 From 9b2fb2da4edfb163842800abbeb4c14bc1759469 Mon Sep 17 00:00:00 2001 From: Pavel Revak Date: Thu, 20 Aug 2009 22:30:54 -0700 Subject: Input: ucb1400_ts - enable interrupt unconditionally Sometimes, when using the touchscreen, it stops working till next restart and the following message is printed: ucb1400: unexpected IE_STATUS = 0x0 The following patch retriggers the touchscreen interrupt unconditionally. This prevents hanging of the touchscreen in case of bogus interrupt occurence. Signed-off-by: Pavel Revak Acked-by: Marek Vasut Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 3b345f9cf0c..3a7a58222f8 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -170,11 +170,11 @@ static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb) ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr); ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); - if (isr & UCB_IE_TSPX) { + if (isr & UCB_IE_TSPX) ucb1400_ts_irq_disable(ucb->ac97); - enable_irq(ucb->irq); - } else - printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr); + else + dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr); + enable_irq(ucb->irq); } static int ucb1400_ts_thread(void *_ucb) -- cgit v1.2.3-18-g5258 From 1a9937b7f07ab6e35515e32a7625f0ba50ab7670 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 20 Aug 2009 21:16:17 -0300 Subject: rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B RTL8187B always needs MSR_LINK_ENEDCA flag to be set even when it is in no link mode, otherwise it'll not be able to associate when this flag is not set after the change "mac80211: fix managed mode BSSID handling". By accident, setting BSSID of AP before association makes 8187B to successfuly associate even when ENEDCA flag isn't set, which was the case before the mac80211 change. But now the BSSID of AP we are trying to associate is only available after association is successful, and any attempt to associate without the needed flag doesn't work. Signed-off-by: Herton Ronaldo Krzesinski Tested-by: Larry Finger Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 294250e294d..87a95588a8e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -869,6 +869,9 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) priv->aifsn[3] = 3; /* AIFSN[AC_BE] */ rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); + /* ENEDCA flag must always be set, transmit issues? */ + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + return 0; } @@ -1173,13 +1176,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, rtl818x_iowrite8(priv, &priv->map->BSSID[i], info->bssid[i]); + if (priv->is_rtl8187b) + reg = RTL818X_MSR_ENEDCA; + else + reg = 0; + if (is_valid_ether_addr(info->bssid)) { - reg = RTL818X_MSR_INFRA; - if (priv->is_rtl8187b) - reg |= RTL818X_MSR_ENEDCA; + reg |= RTL818X_MSR_INFRA; rtl818x_iowrite8(priv, &priv->map->MSR, reg); } else { - reg = RTL818X_MSR_NO_LINK; + reg |= RTL818X_MSR_NO_LINK; rtl818x_iowrite8(priv, &priv->map->MSR, reg); } -- cgit v1.2.3-18-g5258 From 9f844e5118d1627025c8ea7cfc0ea69038ea63fd Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Sat, 22 Aug 2009 17:38:23 +0200 Subject: drm/radeon/kms: Fix radeon_gem_busy_ioctl harder. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was mixing up TTM placement values and flags. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_gem.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 14c19980292..d880edf254d 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -274,12 +274,18 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, } robj = gobj->driver_private; r = radeon_object_busy_domain(robj, &cur_placement); - if (cur_placement == TTM_PL_VRAM) + switch (cur_placement) { + case TTM_PL_VRAM: args->domain = RADEON_GEM_DOMAIN_VRAM; - if (cur_placement == TTM_PL_FLAG_TT) + break; + case TTM_PL_TT: args->domain = RADEON_GEM_DOMAIN_GTT; - if (cur_placement == TTM_PL_FLAG_SYSTEM) + break; + case TTM_PL_SYSTEM: args->domain = RADEON_GEM_DOMAIN_CPU; + default: + break; + } mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); -- cgit v1.2.3-18-g5258 From 06739a8ad321b1e5140b318c648b0cc4bf8c6daa Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Sun, 23 Aug 2009 18:09:04 +0200 Subject: [S390] cio: fix double free after failed device initialization If io_subchannel_initialize_dev fails it will release the only reference to the ccw device therefore the caller should not kfree this device since this is done in the release function. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 3c57c1a18bb..d593bc76afe 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -772,10 +772,8 @@ static struct ccw_device * io_subchannel_create_ccwdev(struct subchannel *sch) cdev = io_subchannel_allocate_dev(sch); if (!IS_ERR(cdev)) { ret = io_subchannel_initialize_dev(sch, cdev); - if (ret) { - kfree(cdev); + if (ret) cdev = ERR_PTR(ret); - } } return cdev; } -- cgit v1.2.3-18-g5258 From cf05b824dbb871159e1b4c4f2733b9c9d2f756cf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 23 Aug 2009 18:09:05 +0200 Subject: [S390] drivers/s390: put NULL test before dereference If the NULL test on block is needed, it should be before the dereference of the base field. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ expression E1,E2; identifier fld; statement S1,S2; @@ E1 = E2->fld; ( if (E1 == NULL) S1 else S2 | *if (E2 == NULL) S1 else S2 ) // Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 74983666865..3f62dd50bbb 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2135,9 +2135,9 @@ static int dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo) struct dasd_device *base; block = bdev->bd_disk->private_data; - base = block->base; if (!block) return -ENODEV; + base = block->base; if (!base->discipline || !base->discipline->fill_geometry) -- cgit v1.2.3-18-g5258 From 6ff9c2e7fa8ca63a575792534b63c5092099c286 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Sun, 23 Aug 2009 19:02:13 -0700 Subject: E100: fix interaction with swiotlb on X86. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Data in descriptors is accessed simultaneously by the chip (writing status and size when a packet is received) and CPU (reading to check if the packet was received). This isn't a valid usage of PCI DMA API, which requires use of the coherent (consistent) memory for such purpose. Unfortunately e100 chips working in "simplified" RX mode have to store received data directly after the descriptor. Fixing the driver to conform to the API would require using unsupported "flexible" RX mode or receiving data into a coherent memory and using CPU to copy it to network buffers. This patch, while not yet making the driver conform to the PCI DMA API, allows it to work correctly on X86 with swiotlb (while not breaking other architectures). Signed-off-by: Krzysztof Hałasa Signed-off-by: David S. Miller --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 41b648a67fe..3a6735dc9f6 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1899,7 +1899,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, nic->ru_running = RU_SUSPENDED; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, sizeof(struct rfd), - PCI_DMA_BIDIRECTIONAL); + PCI_DMA_FROMDEVICE); return -ENODATA; } -- cgit v1.2.3-18-g5258 From c189308bd8b6a29b11c3ec29a42a3f0aabad6bc8 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 21 Aug 2009 00:46:06 +0000 Subject: net: Fix Micrel KSZ8842 Kconfig description MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Mohr Acked-by: Richard Röjfors Signed-off-by: David S. Miller --- drivers/net/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7a90e7ce5a9..5ce7cbabd7a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1727,7 +1727,8 @@ config KS8842 tristate "Micrel KSZ8842" depends on HAS_IOMEM help - This platform driver is for Micrel KSZ8842 chip. + This platform driver is for Micrel KSZ8842 / KS8842 + 2-port ethernet switch chip (managed, VLAN, QoS). config KS8851 tristate "Micrel KS8851 SPI" -- cgit v1.2.3-18-g5258 From 4871953c0ef2cafeb37bbe186d9d13dcb24fc2c5 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Sun, 23 Aug 2009 19:49:07 -0700 Subject: drivers/net: fixed drivers that support netpoll use ndo_start_xmit() The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng Acked-by: Matt Mackall Signed-off-by: David S. Miller --- drivers/net/fec_mpc52xx.c | 5 +++-- drivers/net/ixp2000/ixpdev.c | 5 +++-- drivers/net/macb.c | 7 ++++--- drivers/net/mlx4/en_tx.c | 5 +++-- 4 files changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index cc786333d95..c40113f5896 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -309,6 +309,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct mpc52xx_fec_priv *priv = netdev_priv(dev); struct bcom_fec_bd *bd; + unsigned long flags; if (bcom_queue_full(priv->tx_dmatsk)) { if (net_ratelimit()) @@ -316,7 +317,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } - spin_lock_irq(&priv->lock); + spin_lock_irqsave(&priv->lock, flags); dev->trans_start = jiffies; bd = (struct bcom_fec_bd *) @@ -332,7 +333,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); } - spin_unlock_irq(&priv->lock); + spin_unlock_irqrestore(&priv->lock, flags); return NETDEV_TX_OK; } diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 2a0174b62e9..92fb8235c76 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -41,6 +41,7 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) struct ixpdev_priv *ip = netdev_priv(dev); struct ixpdev_tx_desc *desc; int entry; + unsigned long flags; if (unlikely(skb->len > PAGE_SIZE)) { /* @@@ Count drops. */ @@ -63,11 +64,11 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - local_irq_disable(); + local_irq_save(flags); ip->tx_queue_entries++; if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) netif_stop_queue(dev); - local_irq_enable(); + local_irq_restore(flags); return 0; } diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 5b5c25368d1..e3601cf3f93 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -620,6 +620,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_addr_t mapping; unsigned int len, entry; u32 ctrl; + unsigned long flags; #ifdef DEBUG int i; @@ -635,12 +636,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) #endif len = skb->len; - spin_lock_irq(&bp->lock); + spin_lock_irqsave(&bp->lock, flags); /* This is a hard error, log it. */ if (TX_BUFFS_AVAIL(bp) < 1) { netif_stop_queue(dev); - spin_unlock_irq(&bp->lock); + spin_unlock_irqrestore(&bp->lock, flags); dev_err(&bp->pdev->dev, "BUG! Tx Ring full when queue awake!\n"); dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n", @@ -674,7 +675,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) if (TX_BUFFS_AVAIL(bp) < 1) netif_stop_queue(dev); - spin_unlock_irq(&bp->lock); + spin_unlock_irqrestore(&bp->lock, flags); dev->trans_start = jiffies; diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 5a88b3f5769..62208401c4d 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -437,6 +437,7 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) { struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind]; struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind]; + unsigned long flags; /* If we don't have a pending timer, set one up to catch our recent post in case the interface becomes idle */ @@ -445,9 +446,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock_irq(&ring->comp_lock)) { + if (spin_trylock_irqsave(&ring->comp_lock, flags)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock_irq(&ring->comp_lock); + spin_unlock_irqrestore(&ring->comp_lock, flags); } } -- cgit v1.2.3-18-g5258 From d2f3ad4cedc00c8ee848e7abe9b2bbc93b9a8c2d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Aug 2009 22:57:30 -0700 Subject: pxaficp-ir: remove incorrect net_device_ops This patch fixes broken pxaficp-ir. The problem was in incorrect net_device_ops being specified which prevented the driver from operating. The symptoms were: - failing ifconfig for IrLAN, resulting in SIOCSIFFLAGS: Cannot assign requested address - irattach working for IrCOMM, but the port stayed disabled Moreover this patch corrects missing sysfs device link. Signed-off-by: Marek Vasut Signed-off-by: David S. Miller --- drivers/net/irda/pxaficp_ir.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 3376a4f39e0..77d10edefd2 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -803,9 +803,6 @@ static const struct net_device_ops pxa_irda_netdev_ops = { .ndo_stop = pxa_irda_stop, .ndo_start_xmit = pxa_irda_hard_xmit, .ndo_do_ioctl = pxa_irda_ioctl, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, }; static int pxa_irda_probe(struct platform_device *pdev) @@ -830,6 +827,7 @@ static int pxa_irda_probe(struct platform_device *pdev) if (!dev) goto err_mem_3; + SET_NETDEV_DEV(dev, &pdev->dev); si = netdev_priv(dev); si->dev = &pdev->dev; si->pdata = pdev->dev.platform_data; -- cgit v1.2.3-18-g5258 From 8ff499e43c537648399fca8ba39d24c0768b3fab Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Sun, 23 Aug 2009 22:59:04 -0700 Subject: smc91x: let smc91x work well under netpoll The NETPOLL requires that interrupts remain disabled in its callbacks. Using *_irq_save()/irq_restore() to replace *_irq_disable()/irq_enable() functions in NETPOLL's callbacks of smc91x, so that it doesn't enable interrupts when already disabled, and kgdboe/netconsole would work properly over smc91x. Signed-off-by: Dongdong Deng Acked-by: Nicolas Pitre Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1c70e999cc5..9da1fa12a67 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -196,21 +196,23 @@ static void PRINT_PKT(u_char *buf, int length) /* this enables an interrupt in the interrupt mask register */ #define SMC_ENABLE_INT(lp, x) do { \ unsigned char mask; \ - spin_lock_irq(&lp->lock); \ + unsigned long smc_enable_flags; \ + spin_lock_irqsave(&lp->lock, smc_enable_flags); \ mask = SMC_GET_INT_MASK(lp); \ mask |= (x); \ SMC_SET_INT_MASK(lp, mask); \ - spin_unlock_irq(&lp->lock); \ + spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \ } while (0) /* this disables an interrupt from the interrupt mask register */ #define SMC_DISABLE_INT(lp, x) do { \ unsigned char mask; \ - spin_lock_irq(&lp->lock); \ + unsigned long smc_disable_flags; \ + spin_lock_irqsave(&lp->lock, smc_disable_flags); \ mask = SMC_GET_INT_MASK(lp); \ mask &= ~(x); \ SMC_SET_INT_MASK(lp, mask); \ - spin_unlock_irq(&lp->lock); \ + spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \ } while (0) /* @@ -520,21 +522,21 @@ static inline void smc_rcv(struct net_device *dev) * any other concurrent access and C would always interrupt B. But life * isn't that easy in a SMP world... */ -#define smc_special_trylock(lock) \ +#define smc_special_trylock(lock, flags) \ ({ \ int __ret; \ - local_irq_disable(); \ + local_irq_save(flags); \ __ret = spin_trylock(lock); \ if (!__ret) \ - local_irq_enable(); \ + local_irq_restore(flags); \ __ret; \ }) -#define smc_special_lock(lock) spin_lock_irq(lock) -#define smc_special_unlock(lock) spin_unlock_irq(lock) +#define smc_special_lock(lock, flags) spin_lock_irq(lock, flags) +#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags) #else -#define smc_special_trylock(lock) (1) -#define smc_special_lock(lock) do { } while (0) -#define smc_special_unlock(lock) do { } while (0) +#define smc_special_trylock(lock, flags) (1) +#define smc_special_lock(lock, flags) do { } while (0) +#define smc_special_unlock(lock, flags) do { } while (0) #endif /* @@ -548,10 +550,11 @@ static void smc_hardware_send_pkt(unsigned long data) struct sk_buff *skb; unsigned int packet_no, len; unsigned char *buf; + unsigned long flags; DBG(3, "%s: %s\n", dev->name, __func__); - if (!smc_special_trylock(&lp->lock)) { + if (!smc_special_trylock(&lp->lock, flags)) { netif_stop_queue(dev); tasklet_schedule(&lp->tx_task); return; @@ -559,7 +562,7 @@ static void smc_hardware_send_pkt(unsigned long data) skb = lp->pending_tx_skb; if (unlikely(!skb)) { - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); return; } lp->pending_tx_skb = NULL; @@ -569,7 +572,7 @@ static void smc_hardware_send_pkt(unsigned long data) printk("%s: Memory allocation failed.\n", dev->name); dev->stats.tx_errors++; dev->stats.tx_fifo_errors++; - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); goto done; } @@ -608,7 +611,7 @@ static void smc_hardware_send_pkt(unsigned long data) /* queue the packet for TX */ SMC_SET_MMU_CMD(lp, MC_ENQUEUE); - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); dev->trans_start = jiffies; dev->stats.tx_packets++; @@ -633,6 +636,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; unsigned int numPages, poll_count, status; + unsigned long flags; DBG(3, "%s: %s\n", dev->name, __func__); @@ -658,7 +662,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - smc_special_lock(&lp->lock); + smc_special_lock(&lp->lock, flags); /* now, try to allocate the memory */ SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages); @@ -676,7 +680,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } } while (--poll_count); - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); lp->pending_tx_skb = skb; if (!poll_count) { -- cgit v1.2.3-18-g5258 From 94da210af4978b94cb70318bd1b282a73c50b175 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Thu, 20 Aug 2009 09:19:53 +0200 Subject: [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the loop in orion_nand_read_buf. This patch makes the instruction volatile to avoid the issue. I've discussed this at gcc-help, refer to the thread at http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html The early clobber is added to avoid the destination registers and the source register overlapping. Signed-off-by: Simon Kagstrom Signed-off-by: Nicolas Pitre --- drivers/mtd/nand/orion_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 7ad972229db..0d9d4bc9c76 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -61,7 +61,7 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) buf64 = (uint64_t *)buf; while (i < len/8) { uint64_t x; - asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base)); + asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base)); buf64[i++] = x; } i *= 8; -- cgit v1.2.3-18-g5258 From 942642a412454c3365f0abc8399c8ef2944f4eac Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 6 Aug 2009 17:35:50 +0800 Subject: drm/i915: Set the multiplier for SDVO on G33 platform http://bugs.freedesktop.org/show_bug.cgi?id=21417 Signed-off-by: Sean Young Reviewed-by: Zhao Yakui Acked-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d6fce213341..f611e216b0b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2396,7 +2396,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, if (is_sdvo) { dpll |= DPLL_DVO_HIGH_SPEED; sdvo_pixel_multiply = adjusted_mode->clock / mode->clock; - if (IS_I945G(dev) || IS_I945GM(dev)) + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; else if (IS_IGDNG(dev)) dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; -- cgit v1.2.3-18-g5258 From bc5e5718acd7f7d000d913e619562767863610bf Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Sat, 8 Aug 2009 13:01:17 +0200 Subject: drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 0c2e39525b3b53a97a0202c5f35058147e53977e is not sufficient to get fd.o bug #20115 fixed. In addition intel_find_best_PLL() must not only rely on BIOS settings for i9xx chips but also for i8xx, so drop the IS_I9XX() check. Signed-off-by: Bruno Prémont Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f611e216b0b..8fd90f31b60 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -666,7 +666,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, intel_clock_t clock; int err = target; - if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && (I915_READ(LVDS)) != 0) { /* * For LVDS, if the panel is on, just rely on its current -- cgit v1.2.3-18-g5258 From 19e1f888c681d9f71ae0a814902d334eac1911dd Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 9 Aug 2009 13:50:53 +0200 Subject: drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() Bit SDVO_OUTPUT_SVID0 was tested twice Signed-off-by: Roel Kluin Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 5371d933255..95ca0acc494 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1458,7 +1458,7 @@ intel_sdvo_multifunc_encoder(struct intel_output *intel_output) (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1)) caps++; if (sdvo_priv->caps.output_flags & - (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0)) + (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1)) caps++; if (sdvo_priv->caps.output_flags & (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1)) -- cgit v1.2.3-18-g5258 From 27185ae1b795a4ba5e25b95fb5584e950545d774 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 24 Aug 2009 13:50:23 +0800 Subject: drm/i915: Always use SDVO_B detect bit for SDVO output detection. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After the following commit is shipped, the SDVO C detection will depend on the SDVO_C/DP detion bit. commit 13520b051e8888dd3af9bda639d83e7df76613d1 Author: Kristian Høgsberg Date: Fri Mar 13 15:42:14 2009 -0400 drm/i915: Read the right SDVO register when detecting SVDO/HDMI. According to the spec we should continue to detect the SDVO_B/C based on the SDVO_B detection bit. The new detection bit on G4X platform is for the HDMI_C detection rather than SDVO_C detection. https://bugs.freedesktop.org/show_bug.cgi?id=20639 Signed-off-by: Ma Ling Acked-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8fd90f31b60..4fad113a1b2 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3218,30 +3218,30 @@ static void intel_setup_outputs(struct drm_device *dev) intel_dp_init(dev, PCH_DP_D); } else if (IS_I9XX(dev)) { - int found; - u32 reg; + bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOB); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) intel_dp_init(dev, DP_B); } /* Before G4X SDVOC doesn't have its own detect register */ - if (IS_G4X(dev)) - reg = SDVOC; - else - reg = SDVOB; - if (I915_READ(reg) & SDVO_DETECTED) { + if (I915_READ(SDVOB) & SDVO_DETECTED) found = intel_sdvo_init(dev, SDVOC); - if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) + + if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { + + if (SUPPORTS_INTEGRATED_HDMI(dev)) intel_hdmi_init(dev, SDVOC); - if (!found && SUPPORTS_INTEGRATED_DP(dev)) + if (SUPPORTS_INTEGRATED_DP(dev)) intel_dp_init(dev, DP_C); } + if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) intel_dp_init(dev, DP_D); } else -- cgit v1.2.3-18-g5258 From f8aed700c6ec46ddade6570004ce25332283b306 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 24 Aug 2009 13:50:24 +0800 Subject: drm/i915: Set crtc/clone mask in different output devices Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling Reviewed-by : Jesse Barnes Signed-off-by: Zhao Yakui Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 4 +++ drivers/gpu/drm/i915/intel_display.c | 49 +++--------------------------------- drivers/gpu/drm/i915/intel_dp.c | 12 +++++++++ drivers/gpu/drm/i915/intel_drv.h | 20 +++++++++++++++ drivers/gpu/drm/i915/intel_dvo.c | 6 +++++ drivers/gpu/drm/i915/intel_hdmi.c | 18 ++++++++----- drivers/gpu/drm/i915/intel_lvds.c | 2 ++ drivers/gpu/drm/i915/intel_sdvo.c | 11 ++++++++ drivers/gpu/drm/i915/intel_tv.c | 2 ++ 9 files changed, 73 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 4cf8e2e88a4..d1294978a38 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -537,6 +537,10 @@ void intel_crt_init(struct drm_device *dev) } intel_output->type = INTEL_OUTPUT_ANALOG; + intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) | + (1 << INTEL_ANALOG_CLONE_BIT) | + (1 << INTEL_SDVO_LVDS_CLONE_BIT); + intel_output->crtc_mask = (1 << 0) | (1 << 1); connector->interlace_allowed = 0; connector->doublescan_allowed = 0; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4fad113a1b2..3fadb535885 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3170,7 +3170,7 @@ static int intel_connector_clones(struct drm_device *dev, int type_mask) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct intel_output *intel_output = to_intel_output(connector); - if (type_mask & (1 << intel_output->type)) + if (type_mask & intel_output->clone_mask) index_mask |= (1 << entry); entry++; } @@ -3253,51 +3253,10 @@ static void intel_setup_outputs(struct drm_device *dev) list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct intel_output *intel_output = to_intel_output(connector); struct drm_encoder *encoder = &intel_output->enc; - int crtc_mask = 0, clone_mask = 0; - /* valid crtcs */ - switch(intel_output->type) { - case INTEL_OUTPUT_HDMI: - crtc_mask = ((1 << 0)| - (1 << 1)); - clone_mask = ((1 << INTEL_OUTPUT_HDMI)); - break; - case INTEL_OUTPUT_DVO: - case INTEL_OUTPUT_SDVO: - crtc_mask = ((1 << 0)| - (1 << 1)); - clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | - (1 << INTEL_OUTPUT_DVO) | - (1 << INTEL_OUTPUT_SDVO)); - break; - case INTEL_OUTPUT_ANALOG: - crtc_mask = ((1 << 0)| - (1 << 1)); - clone_mask = ((1 << INTEL_OUTPUT_ANALOG) | - (1 << INTEL_OUTPUT_DVO) | - (1 << INTEL_OUTPUT_SDVO)); - break; - case INTEL_OUTPUT_LVDS: - crtc_mask = (1 << 1); - clone_mask = (1 << INTEL_OUTPUT_LVDS); - break; - case INTEL_OUTPUT_TVOUT: - crtc_mask = ((1 << 0) | - (1 << 1)); - clone_mask = (1 << INTEL_OUTPUT_TVOUT); - break; - case INTEL_OUTPUT_DISPLAYPORT: - crtc_mask = ((1 << 0) | - (1 << 1)); - clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT); - break; - case INTEL_OUTPUT_EDP: - crtc_mask = (1 << 1); - clone_mask = (1 << INTEL_OUTPUT_EDP); - break; - } - encoder->possible_crtcs = crtc_mask; - encoder->possible_clones = intel_connector_clones(dev, clone_mask); + encoder->possible_crtcs = intel_output->crtc_mask; + encoder->possible_clones = intel_connector_clones(dev, + intel_output->clone_mask); } } diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index a6ff15ac548..f2afc4af4bc 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1254,6 +1254,18 @@ intel_dp_init(struct drm_device *dev, int output_reg) else intel_output->type = INTEL_OUTPUT_DISPLAYPORT; + if (output_reg == DP_B) + intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT); + else if (output_reg == DP_C) + intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT); + else if (output_reg == DP_D) + intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT); + + if (IS_eDP(intel_output)) { + intel_output->crtc_mask = (1 << 1); + intel_output->clone_mask = (1 << INTEL_OUTPUT_EDP); + } else + intel_output->crtc_mask = (1 << 0) | (1 << 1); connector->interlace_allowed = true; connector->doublescan_allowed = 0; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index d6f92ea1b55..25aa6facc12 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -57,6 +57,24 @@ #define INTEL_OUTPUT_DISPLAYPORT 7 #define INTEL_OUTPUT_EDP 8 +/* Intel Pipe Clone Bit */ +#define INTEL_HDMIB_CLONE_BIT 1 +#define INTEL_HDMIC_CLONE_BIT 2 +#define INTEL_HDMID_CLONE_BIT 3 +#define INTEL_HDMIE_CLONE_BIT 4 +#define INTEL_HDMIF_CLONE_BIT 5 +#define INTEL_SDVO_NON_TV_CLONE_BIT 6 +#define INTEL_SDVO_TV_CLONE_BIT 7 +#define INTEL_SDVO_LVDS_CLONE_BIT 8 +#define INTEL_ANALOG_CLONE_BIT 9 +#define INTEL_TV_CLONE_BIT 10 +#define INTEL_DP_B_CLONE_BIT 11 +#define INTEL_DP_C_CLONE_BIT 12 +#define INTEL_DP_D_CLONE_BIT 13 +#define INTEL_LVDS_CLONE_BIT 14 +#define INTEL_DVO_TMDS_CLONE_BIT 15 +#define INTEL_DVO_LVDS_CLONE_BIT 16 + #define INTEL_DVO_CHIP_NONE 0 #define INTEL_DVO_CHIP_LVDS 1 #define INTEL_DVO_CHIP_TMDS 2 @@ -86,6 +104,8 @@ struct intel_output { bool needs_tv_clock; void *dev_priv; void (*hot_plug)(struct intel_output *); + int crtc_mask; + int clone_mask; }; struct intel_crtc { diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 13bff20930e..a4d2606de77 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -435,14 +435,20 @@ void intel_dvo_init(struct drm_device *dev) continue; intel_output->type = INTEL_OUTPUT_DVO; + intel_output->crtc_mask = (1 << 0) | (1 << 1); switch (dvo->type) { case INTEL_DVO_CHIP_TMDS: + intel_output->clone_mask = + (1 << INTEL_DVO_TMDS_CLONE_BIT) | + (1 << INTEL_ANALOG_CLONE_BIT); drm_connector_init(dev, connector, &intel_dvo_connector_funcs, DRM_MODE_CONNECTOR_DVII); encoder_type = DRM_MODE_ENCODER_TMDS; break; case INTEL_DVO_CHIP_LVDS: + intel_output->clone_mask = + (1 << INTEL_DVO_LVDS_CLONE_BIT); drm_connector_init(dev, connector, &intel_dvo_connector_funcs, DRM_MODE_CONNECTOR_LVDS); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 1842290cded..fa304e13601 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -230,22 +230,28 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) connector->interlace_allowed = 0; connector->doublescan_allowed = 0; + intel_output->crtc_mask = (1 << 0) | (1 << 1); /* Set up the DDC bus. */ - if (sdvox_reg == SDVOB) + if (sdvox_reg == SDVOB) { + intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB"); - else if (sdvox_reg == SDVOC) + } else if (sdvox_reg == SDVOC) { + intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC"); - else if (sdvox_reg == HDMIB) + } else if (sdvox_reg == HDMIB) { + intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE, "HDMIB"); - else if (sdvox_reg == HDMIC) + } else if (sdvox_reg == HDMIC) { + intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD, "HDMIC"); - else if (sdvox_reg == HDMID) + } else if (sdvox_reg == HDMID) { + intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT); intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF, "HDMID"); - + } if (!intel_output->ddc_bus) goto err_connector; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 3f445a80c55..8df02ef8926 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -916,6 +916,8 @@ void intel_lvds_init(struct drm_device *dev) drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); intel_output->type = INTEL_OUTPUT_LVDS; + intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT); + intel_output->crtc_mask = (1 << 1); drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); connector->display_info.subpixel_order = SubPixelHorizontalRGB; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 95ca0acc494..d3b74ba62b4 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/g