From 23bd15ec662344dc10e9918fdd0dbc58bc71526d Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 14 Dec 2011 21:10:06 -0200 Subject: drm/i915: Fix TV Out refresh rate. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index f3c6a9a8b08..2b1fcadbc5c 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -417,7 +417,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ @@ -460,7 +460,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-443", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ @@ -502,7 +502,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-J", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -545,7 +545,7 @@ static const struct tv_mode tv_modes[] = { { .name = "PAL-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -589,7 +589,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL-N", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -634,7 +634,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -821,7 +821,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@50Hz", .clock = 148800, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, @@ -847,7 +847,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@60Hz", .clock = 148800, - .refresh = 30000, + .refresh = 60000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, -- cgit v1.2.3-18-g5258 From 55a6713b3f30a5024056027e9dbf03ac8f13bfc9 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 15 Dec 2011 14:47:33 -0200 Subject: drm/i915: Removing TV Out modes. These modes are no longer needed or are not according to TV timing standards. Intel PRM Vol 3 - Display Registers Updated - Section 5 TV-Out Programming / 5.2.1 Television Standards / 5.2.1.1 Timing tables Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 122 ---------------------------------------- 1 file changed, 122 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 2b1fcadbc5c..1571be37ce3 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -673,78 +673,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "480p@59.94Hz", - .clock = 107520, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 857, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "480p@60Hz", - .clock = 107520, - .refresh = 60000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 856, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "576p", - .clock = 107520, - .refresh = 50000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 139, - .hblank_start = 859, .htotal = 863, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 48, .vi_end_f2 = 48, - .nbr_end = 575, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@60Hz", .clock = 148800, @@ -769,30 +697,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "720p@59.94Hz", - .clock = 148800, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 80, .hblank_end = 300, - .hblank_start = 1580, .htotal = 1651, - - .progressive = true, .trilevel_sync = true, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 29, .vi_end_f2 = 29, - .nbr_end = 719, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@50Hz", .clock = 148800, @@ -868,32 +772,6 @@ static const struct tv_mode tv_modes[] = { .burst_ena = false, - .filter_table = filter_table, - }, - { - .name = "1080i@59.94Hz", - .clock = 148800, - .refresh = 29970, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 88, .hblank_end = 235, - .hblank_start = 2155, .htotal = 2201, - - .progressive = false, .trilevel_sync = true, - - .vsync_start_f1 = 4, .vsync_start_f2 = 5, - .vsync_len = 10, - - .veq_ena = true, .veq_start_f1 = 4, - .veq_start_f2 = 4, .veq_len = 10, - - - .vi_end_f1 = 21, .vi_end_f2 = 22, - .nbr_end = 539, - - .burst_ena = false, - .filter_table = filter_table, }, }; -- cgit v1.2.3-18-g5258 From ba68e086223a5f149f37bf8692c8cdbf1b0ba3ef Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 6 Jan 2012 19:45:34 -0200 Subject: drm/i915/sdvo: always set positive sync polarity This is a revert of 81a14b46846fea0741902e8d8dfcc6c6c78154c8. We already set the mode polarity using the SDVO commands with struct intel_sdvo_dtd. We have at least 3 bugs that get fixed with this patch. The documentation, despite not clear, can also be interpreted in a way that suggests this patch is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15766 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42174 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43333 Cc: stable@kernel.org Reviewed-by: Eric Anholt Reviewed-by: Jesse Barnes Signed-off-by: Paulo Zanoni Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_sdvo.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f7b9268df26..e334ec33a47 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1066,15 +1066,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* Set the SDVO control regs. */ if (INTEL_INFO(dev)->gen >= 4) { - sdvox = 0; + /* The real mode polarity is set by the SDVO commands, using + * struct intel_sdvo_dtd. */ + sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; if (intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range; if (INTEL_INFO(dev)->gen < 5) sdvox |= SDVO_BORDER_ENABLE; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - sdvox |= SDVO_VSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - sdvox |= SDVO_HSYNC_ACTIVE_HIGH; } else { sdvox = I915_READ(intel_sdvo->sdvo_reg); switch (intel_sdvo->sdvo_reg) { -- cgit v1.2.3-18-g5258 From a05a586239c66a256ea1fbae859e742e4c91c8d9 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 20 Dec 2011 08:54:15 -0800 Subject: drm/i915: Print debugfs object list sizes in KiB instead of bytes. They're all in increments of pages, so this just makes it easier on the eyes. Signed-off-by: Eric Anholt Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 11807989f91..f8b8ed22b4d 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -121,11 +121,11 @@ static const char *cache_level_str(int type) static void describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj) { - seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s", + seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s", &obj->base, get_pin_flag(obj), get_tiling_flag(obj), - obj->base.size, + obj->base.size / 1024, obj->base.read_domains, obj->base.write_domain, obj->last_rendering_seqno, -- cgit v1.2.3-18-g5258 From 5e5b7fa2ad84f7806d0c7f5af8e1440bc91b4ec7 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:34 -0200 Subject: drm/i915: simplify pipe checking This is also handled by i915_reg.h, so just reuse this trick to reduce universe entropy. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Reviewed-by: Cyril Brulebois Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 7886e4fb60e..c0b945cdcd9 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -28,6 +28,7 @@ #include "drm.h" #include "i915_drm.h" #include "intel_drv.h" +#include "i915_reg.h" static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { @@ -35,7 +36,7 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) u32 dpll_reg; if (HAS_PCH_SPLIT(dev)) - dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B; + dpll_reg = PCH_DPLL(pipe); else dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B; -- cgit v1.2.3-18-g5258 From 07c1e8c1462fa7324de4c36ae9e55da2abd79cee Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:35 -0200 Subject: drm/i915: handle 3rd pipe We don't need to check 3rd pipe specifically, as it shares PLL with some other one. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index c0b945cdcd9..30d924f447c 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -35,6 +35,10 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) struct drm_i915_private *dev_priv = dev->dev_private; u32 dpll_reg; + /* On IVB, 3rd pipe shares PLL with another one */ + if (pipe > 1) + return false; + if (HAS_PCH_SPLIT(dev)) dpll_reg = PCH_DPLL(pipe); else -- cgit v1.2.3-18-g5258 From d0cd5d482b8a6dc92c6c69a5387baf72ea84f23a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 14 Nov 2011 17:51:39 -0800 Subject: xhci: Fix USB 3.0 device restart on resume. The xHCI hub port code gets passed a zero-based port number by the USB core. It then adds one to in order to find a device slot by port number and device speed by calling xhci_find_slot_id_by_port. That function clearly states it requires a one-based port number. The xHCI port status change event handler was using a zero-based port number that it got from find_faked_portnum_from_hw_portnum, not a one-based port number. This lead to the doorbells never being rung for a device after a resume, or worse, a different device with the same speed having its doorbell rung (which could lead to bad power management in the xHCI host controller). This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Sarah Sharp Acked-by: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b90e1386418..5a818cbbab4 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci, * * Returns a zero-based port number, which is suitable for indexing into each of * the split roothubs' port arrays and bus state arrays. + * Add one to it in order to call xhci_find_slot_id_by_port. */ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, struct xhci_hcd *xhci, u32 port_id) @@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index); + faked_port_index + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; -- cgit v1.2.3-18-g5258 From 12183a20a8baf009bf570ab3db45a27fd6b1fd03 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 21 Dec 2011 23:01:20 +0100 Subject: mtd: nand: fix typo in comment Funny one :) "Heck" fits somehow, too, but I am sure it was meant to be "Check". Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 35b4565050f..8a393f9e602 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2588,7 +2588,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, instr->state = MTD_ERASING; while (len) { - /* Heck if we have a bad block, we do not erase bad blocks! */ + /* Check if we have a bad block, we do not erase bad blocks! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", -- cgit v1.2.3-18-g5258 From 9398d1ce09b9009996f7d2468e1d3c785fa6feda Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 4 Jan 2012 11:18:46 +0800 Subject: mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 In MX28, if we do not reset the BCH module. The BCH module may becomes unstable when the board reboots for several thousands times. This bug has been catched in customer's production. The patch adds some comments (some from Wolfram Sang), and fixes it now. Also change gpmi_reset_block() to static. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2a56fc6f399..c56f8e021b9 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -69,17 +69,19 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) * [1] enable the module. * [2] reset the module. * - * In most of the cases, it's ok. But there is a hardware bug in the BCH block. + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). * If you try to soft reset the BCH block, it becomes unusable until * the next hard reset. This case occurs in the NAND boot mode. When the board * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. * * To avoid this bug, just add a new parameter `just_enable` for * the mxs_reset_block(), and rewrite it here. */ -int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { int ret; int timeout = 0x400; @@ -206,7 +208,15 @@ int bch_set_geometry(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = gpmi_reset_block(r->bch_regs, true); + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * On the other hand, the MX28 needs the reset, because one case has been + * seen where the BCH produced ECC errors constantly after 10000 + * consecutive reboots. The latter case has not been seen on the MX23 yet, + * still we don't know if it could happen there as well. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) goto err_out; -- cgit v1.2.3-18-g5258 From 8ca4013d702dae4913fbb625aabf4c2966cdf1f0 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Tue, 25 Oct 2011 15:42:21 -0700 Subject: CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB This is the method used to override LVDS in intel_lvds and appears to be an effective way to ensure that the driver does not enable VGA hotplug. This is the same patch from 2.6.32 kernel in R12 but ported to 2.6.38, will send upstream next. Signed-off-by: Duncan Laurie BUG=chrome-os-partner:117 TEST=Check PORT_HOTPLUG_EN to see if hotplug interrupt is disabled. Run the following command as root, specifically looking at bit 9: mmio_read32 $[$(pci_read32 0 2 0 0x10) + 0x61110] = 0x00000000 Change-Id: Id8240f9fb31d058d8d79ee72f7b4615c43893f5a Reviewed-on: http://gerrit.chromium.org/gerrit/1390 Reviewed-by: Olof Johansson Tested-by: Duncan Laurie Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_crt.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index fee0ad02c6d..dd729d46a61 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -24,6 +24,7 @@ * Eric Anholt */ +#include #include #include #include "drmP.h" @@ -540,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { .destroy = intel_encoder_destroy, }; +static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_no_crt[] = { + { + .callback = intel_no_crt_dmi_callback, + .ident = "ACER ZGB", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), + }, + }, + { } +}; + void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; @@ -547,6 +566,10 @@ void intel_crt_init(struct drm_device *dev) struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; + /* Skip machines without VGA that falsely report hotplug events */ + if (dmi_check_system(intel_no_crt)) + return; + crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); if (!crt) return; -- cgit v1.2.3-18-g5258 From 44306ab302687b519a31aa498b954c1e26f95a6b Mon Sep 17 00:00:00 2001 From: Joel Sass Date: Tue, 10 Jan 2012 13:03:55 -0500 Subject: drm/i915: Add Clientron E830 to the ignore LVDS list Signed-off-by: Joel Sass Reviewed-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e44191132ac..798f6e1aa54 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -708,6 +708,14 @@ static const struct dmi_system_id intel_no_lvds[] = { }, }, { + .callback = intel_no_lvds_dmi_callback, + .ident = "Clientron E830", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clientron"), + DMI_MATCH(DMI_PRODUCT_NAME, "E830"), + }, + }, + { .callback = intel_no_lvds_dmi_callback, .ident = "Asus EeeBox PC EB1007", .matches = { -- cgit v1.2.3-18-g5258 From 7885d2052bd94395e337709cfba093a41f273ff1 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jan 2012 14:51:17 -0800 Subject: drm/i915: mask transcoder select bits before setting them on LVDS The transcoder port may changed from mode set to mode set, so make sure to mask out the selection bits before setting the right ones or we'll get black screens when going from transcoder B to A. Tested-by: Vincent Vanackere Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2a3f707caab..96cea08b10c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5808,12 +5808,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds) { temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; temp |= PORT_TRANS_SEL_CPT(pipe); - else if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; - else - temp &= ~LVDS_PIPEB_SELECT; + } else { + if (pipe == 1) + temp |= LVDS_PIPEB_SELECT; + else + temp &= ~LVDS_PIPEB_SELECT; + } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; -- cgit v1.2.3-18-g5258 From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:42:50 +0900 Subject: video: pvr2fb: Fix up spurious section mismatch warnings. pvr2fb special cases its init/exit routines which causes spurious section mismatches. Set the board_driver array __refdata to silence them. Signed-off-by: Paul Mundt --- drivers/video/pvr2fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f9975100d56..3a3fdc62c75 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif -- cgit v1.2.3-18-g5258 From 96c0a2f52c45d8ec0a2b70810f4693530feaba5d Mon Sep 17 00:00:00 2001 From: Rohit Jain Date: Thu, 12 Jan 2012 12:19:44 +0530 Subject: drm/i915: VBT Parser cleanup for eDP block Support for parsing parameters for S3D support and T3 optimization support is implemented. The order for the bdb_edp struct was also made similar to that indicated in spec. Signed-off-by: Rohit Jain Reviewed-by: Shobhit Kumar Reviewed-by: Vijay A. Purushothaman Reviewed-by: Eugeni Dodonov Acked-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_bios.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 8af3735e27c..dbda6e3bdf0 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -467,8 +467,12 @@ struct edp_link_params { struct bdb_edp { struct edp_power_seq power_seqs[16]; u32 color_depth; - u32 sdrrs_msa_timing_delay; struct edp_link_params link_params[16]; + u32 sdrrs_msa_timing_delay; + + /* ith bit indicates enabled/disabled for (i+1)th panel */ + u16 edp_s3d_feature; + u16 edp_t3_optimization; } __attribute__ ((packed)); void intel_setup_bios(struct drm_device *dev); -- cgit v1.2.3-18-g5258 From 00c2064b7766c4e24af42e21da1903aedc8ca4c0 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 13 Jan 2012 15:48:39 -0800 Subject: drm/i915: sprite init failure on pre-SNB is not a failure We can call the plane init function unconditionally, but don't need to complain if it fails, since that will only happen if we're out of memory (and other things will fail) or if we're on the wrong platform (which is ok). And remove the DRM_ERRORs from the sprite code itself to avoid dmesg spam. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 9 +++------ drivers/gpu/drm/i915/intel_sprite.c | 8 ++------ 2 files changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 96cea08b10c..b3b51c43dad 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9028,12 +9028,9 @@ void intel_modeset_init(struct drm_device *dev) for (i = 0; i < dev_priv->num_pipe; i++) { intel_crtc_init(dev, i); - if (HAS_PCH_SPLIT(dev)) { - ret = intel_plane_init(dev, i); - if (ret) - DRM_ERROR("plane %d init failed: %d\n", - i, ret); - } + ret = intel_plane_init(dev, i); + if (ret) + DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); } /* Just disable it once at startup */ diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d13989fda50..2288abf88cc 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -466,10 +466,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, obj, NULL); - if (ret) { - DRM_ERROR("failed to pin object\n"); + if (ret) goto out_unlock; - } intel_plane->obj = obj; @@ -632,10 +630,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe) unsigned long possible_crtcs; int ret; - if (!(IS_GEN6(dev) || IS_GEN7(dev))) { - DRM_ERROR("new plane code only for SNB+\n"); + if (!(IS_GEN6(dev) || IS_GEN7(dev))) return -ENODEV; - } intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL); if (!intel_plane) -- cgit v1.2.3-18-g5258 From 8109021313c7a3d8947677391ce6ab9cd0bb1d28 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 13 Jan 2012 16:20:06 -0800 Subject: drm/i915: convert force_wake_get to func pointer in the gpu reset code This was forgotten in the original multi-threaded forcewake conversion: commit 8d715f0024f64ad1b1be85d8c081cf577944c847 Author: Keith Packard Date: Fri Nov 18 20:39:01 2011 -0800 drm/i915: add multi-threaded forcewake support Signed-Off-by: Daniel Vetter Reviewed-by: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 8f7187915b0..46c36f5cafb 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -645,7 +645,7 @@ int i915_reset(struct drm_device *dev, u8 flags) ret = gen6_do_reset(dev, flags); /* If reset with a user forcewake, try to restore */ if (atomic_read(&dev_priv->forcewake_count)) - __gen6_gt_force_wake_get(dev_priv); + dev_priv->display.force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); -- cgit v1.2.3-18-g5258 From 48cfe37cc03f616e6c139796962e7ec677cde8a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 21 Dec 2011 14:20:23 -0500 Subject: target: don't allocate bio headroom in iblock We never embedd the bio into a structure, so there is no need to allocate 64 bytes of headroom per bio. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index cc8e6b58ef2..628e877381d 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -129,7 +129,7 @@ static struct se_device *iblock_create_virtdevice( /* * These settings need to be made tunable.. */ - ib_dev->ibd_bio_set = bioset_create(32, 64); + ib_dev->ibd_bio_set = bioset_create(32, 0); if (!ib_dev->ibd_bio_set) { pr_err("IBLOCK: Unable to create bioset()\n"); return ERR_PTR(-ENOMEM); -- cgit v1.2.3-18-g5258 From 9e08e34e3735ae057eb3834da3570995811b7eb9 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:57 -0800 Subject: target: Use correct preempted registration sense code The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 429ad729166..d14860ff250 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -3120,7 +3120,7 @@ static int core_scsi3_pro_preempt( if (!calling_it_nexus) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* @@ -3233,7 +3233,7 @@ static int core_scsi3_pro_preempt( * additional sense code set to REGISTRATIONS PREEMPTED; */ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* -- cgit v1.2.3-18-g5258 From 6816966a8418b980481b4dced7eddd1796b145e8 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:58 -0800 Subject: target: Allow PERSISTENT RESERVE IN for non-reservation holder Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index d14860ff250..68c71cd7a88 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -478,6 +478,7 @@ static int core_scsi3_pr_seq_non_holder( case READ_MEDIA_SERIAL_NUMBER: case REPORT_LUNS: case REQUEST_SENSE: + case PERSISTENT_RESERVE_IN: ret = 0; /*/ Allowed CDBs */ break; default: -- cgit v1.2.3-18-g5258 From 9db9da332250dbe662995703a4dcdd692112f0c3 Mon Sep 17 00:00:00 2001 From: "roland@purestorage.com" Date: Wed, 4 Jan 2012 15:59:58 -0800 Subject: target: Don't zero pages used for data buffers Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data buffers wastes a lot of CPU clearing pages that will be quickly be overwritten by the actual data. However, for emulated control commands such as INQUIRY and so on, the code does assume that the buffer is zeroed. To avoid this CPU overhead, skip the __GFP_ZERO for commands that are actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d3ddd136194..289bc0f125f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3516,6 +3516,7 @@ transport_generic_get_mem(struct se_cmd *cmd) u32 length = cmd->data_length; unsigned int nents; struct page *page; + gfp_t zero_flag; int i = 0; nents = DIV_ROUND_UP(length, PAGE_SIZE); @@ -3526,9 +3527,11 @@ transport_generic_get_mem(struct se_cmd *cmd) cmd->t_data_nents = nents; sg_init_table(cmd->t_data_sg, nents); + zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO; + while (length) { u32 page_len = min_t(u32, length, PAGE_SIZE); - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(GFP_KERNEL | zero_flag); if (!page) goto out; -- cgit v1.2.3-18-g5258 From 9fbc8909876a2160044e71d376848973b9bfdc3f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jan 2012 17:54:00 -0800 Subject: target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB} According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 289bc0f125f..2869fb7d2c0 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4451,8 +4451,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN CDB */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; break; @@ -4460,8 +4460,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN PARAMETER LIST */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26; break; -- cgit v1.2.3-18-g5258 From 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 13 Jan 2012 12:01:34 -0800 Subject: target: Add workaround for zero-length control CDB handling This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 2869fb7d2c0..50d6911d412 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3759,6 +3759,11 @@ transport_allocate_control_task(struct se_cmd *cmd) struct se_task *task; unsigned long flags; + /* Workaround for handling zero-length control CDBs */ + if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && + !cmd->data_length) + return 0; + task = transport_generic_get_task(cmd, cmd->data_direction); if (!task) return -ENOMEM; @@ -3830,6 +3835,14 @@ int transport_generic_new_cmd(struct se_cmd *cmd) else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { cmd->t_state = TRANSPORT_COMPLETE; atomic_set(&cmd->t_transport_active, 1); + + if (cmd->t_task_cdb[0] == REQUEST_SENSE) { + u8 ua_asc = 0, ua_ascq = 0; + + core_scsi3_ua_clear_for_request_sense(cmd, + &ua_asc, &ua_ascq); + } + INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- cgit v1.2.3-18-g5258 From e59a41b69a8e116d5ac8c95c4222f5a971f66bbd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:57 +0100 Subject: target: avoid multiple outputs in scsi_dump_inquiry() The multiple calls to pr_debug() each with one letter results in a new line. This patch merges the multiple requests into one call per line so we don't have the multiple line cuts. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 50d6911d412..e186f7db386 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1255,32 +1255,34 @@ static void core_setup_task_attr_emulation(struct se_device *dev) static void scsi_dump_inquiry(struct se_device *dev) { struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn; + char buf[17]; int i, device_type; /* * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer */ - pr_debug(" Vendor: "); for (i = 0; i < 8; i++) if (wwn->vendor[i] >= 0x20) - pr_debug("%c", wwn->vendor[i]); + buf[i] = wwn->vendor[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Vendor: %s\n", buf); - pr_debug(" Model: "); for (i = 0; i < 16; i++) if (wwn->model[i] >= 0x20) - pr_debug("%c", wwn->model[i]); + buf[i] = wwn->model[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Model: %s\n", buf); - pr_debug(" Revision: "); for (i = 0; i < 4; i++) if (wwn->revision[i] >= 0x20) - pr_debug("%c", wwn->revision[i]); + buf[i] = wwn->revision[i]; else - pr_debug(" "); - - pr_debug("\n"); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Revision: %s\n", buf); device_type = dev->transport->get_device_type(dev); pr_debug(" Type: %s ", scsi_device_type(device_type)); -- cgit v1.2.3-18-g5258 From 1dd0a0674530da61cdbfadd88c96949b483a7c19 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:58 +0100 Subject: target: use save/restore lock primitive in core_dec_lacl_count() It may happen that uasp will free the request in irq conntext, the callchain: uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count() where the last function enables the IRQ. Those irqs are re-disabled later (due to the spin.*irq_restore) but in between we could get hurt. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 0c5992f0d94..00159a4e781 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -320,11 +320,12 @@ int core_free_device_list_for_node( void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) { struct se_dev_entry *deve; + unsigned long flags; - spin_lock_irq(&se_nacl->device_list_lock); + spin_lock_irqsave(&se_nacl->device_list_lock, flags); deve = &se_nacl->device_list[se_cmd->orig_fe_lun]; deve->deve_cmds--; - spin_unlock_irq(&se_nacl->device_list_lock); + spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); } void core_update_device_list_access( -- cgit v1.2.3-18-g5258 From 8d9efe539cf78f6a90947d47100e4a86d907750f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 21:43:38 +0100 Subject: target: fix return code of core_tpg_.*_lun - core_tpg_pre_addlun() returns always ERR_PTR() or the pointer, never NULL. The additional check for NULL in core_dev_add_lun() is not required. - core_tpg_pre_dellun() returns always ERR_PTR() or the pointer, never NULL. The check for NULL in core_dev_del_lun() is wrong. The third argument (int *) is never used, remove it. - core_dev_add_lun() returns always NULL or the pointer, never ERR_PTR. The check for IS_ERR() is not required. (nab: Convert core_dev_add_lun() use err.h macros for failure handling to be consistent with the rest of target_core_fabric_configfs.c callers) Signed-off-by: Sebastian Andrzej Siewior Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 19 ++++++++++--------- drivers/target/target_core_fabric_configfs.c | 4 ++-- drivers/target/target_core_internal.h | 2 +- drivers/target/target_core_tpg.c | 3 +-- 4 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 00159a4e781..de5f4fea7f6 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1295,24 +1295,26 @@ struct se_lun *core_dev_add_lun( { struct se_lun *lun_p; u32 lun_access = 0; + int rc; if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) { pr_err("Unable to export struct se_device while dev_access_obj: %d\n", atomic_read(&dev->dev_access_obj.obj_access_count)); - return NULL; + return ERR_PTR(-EACCES); } lun_p = core_tpg_pre_addlun(tpg, lun); - if ((IS_ERR(lun_p)) || !lun_p) - return NULL; + if (IS_ERR(lun_p)) + return lun_p; if (dev->dev_flags & DF_READ_ONLY) lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; else lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; - if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0) - return NULL; + rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev); + if (rc < 0) + return ERR_PTR(rc); pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from" " CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -1349,11 +1351,10 @@ int core_dev_del_lun( u32 unpacked_lun) { struct se_lun *lun; - int ret = 0; - lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret); - if (!lun) - return ret; + lun = core_tpg_pre_dellun(tpg, unpacked_lun); + if (IS_ERR(lun)) + return PTR_ERR(lun); core_tpg_post_dellun(tpg, lun); diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index 4f77cce2264..9a2ce11e1a6 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -766,9 +766,9 @@ static int target_fabric_port_link( lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev, lun->unpacked_lun); - if (IS_ERR(lun_p) || !lun_p) { + if (IS_ERR(lun_p)) { pr_err("core_dev_add_lun() failed\n"); - ret = -EINVAL; + ret = PTR_ERR(lun_p); goto out; } diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 26f135e94f6..45001364788 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -90,7 +90,7 @@ void core_tpg_wait_for_nacl_pr_ref(struct se_node_acl *); struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32); int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *, u32, void *); -struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *); +struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun); int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *); /* target_core_transport.c */ diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index b7668029bb3..06336ecd872 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -807,8 +807,7 @@ static void core_tpg_shutdown_lun( struct se_lun *core_tpg_pre_dellun( struct se_portal_group *tpg, - u32 unpacked_lun, - int *ret) + u32 unpacked_lun) { struct se_lun *lun; -- cgit v1.2.3-18-g5258 From c1ce4bd56f2846de55043374598fd929ad3b711b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 16:04:15 -0800 Subject: iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [] warn_slowpath_common+0x80/0x98 [ 131.191092] [] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [] __list_del_entry+0x8d/0x98 [ 131.191092] [] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? schedule+0x55/0x57 [ 131.191092] [] kthread+0x7d/0x85 [ 131.191092] [] kernel_thread_helper+0x4/0x10 [ 131.191092] [] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [] ? gs_change+0x13/0x13 Reported-by: Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a05ca1c4f01..11287e1ece1 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -849,6 +849,17 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) case ISCSI_OP_SCSI_TMFUNC: transport_generic_free_cmd(&cmd->se_cmd, 1); break; + case ISCSI_OP_REJECT: + /* + * Handle special case for REJECT when iscsi_add_reject*() has + * overwritten the original iscsi_opcode assignment, and the + * associated cmd->se_cmd needs to be released. + */ + if (cmd->se_cmd.se_tfo != NULL) { + transport_generic_free_cmd(&cmd->se_cmd, 1); + break; + } + /* Fall-through */ default: iscsit_release_cmd(cmd); break; -- cgit v1.2.3-18-g5258 From cd931ee62fd0258fc85c76a7c5499fe85e0f3436 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 17:11:54 -0800 Subject: iscsi-target: Fix double list_add with iscsit_alloc_buffs reject This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ac44af165b2..6e070e0a839 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1061,7 +1061,7 @@ attach_cmd: if (ret < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); + 1, 0, buf, cmd); /* * Check the CmdSN against ExpCmdSN/MaxCmdSN here if * the Immediate Bit is not set, and no Immediate -- cgit v1.2.3-18-g5258 From f8d48ae52eeec906d7fb42485eb26a5d305bab0a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 15 Jan 2012 14:30:24 +0300 Subject: iscsi-target: make one-bit bitfields unsigned Signed bitfields are a problem because instead of being 1 or 0 like you'd expect they are 0 and -1. It doesn't cause a problem in this case but sparse complains: drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index f1a02dad05a..ebf81fdbb5c 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -561,8 +561,8 @@ struct iscsi_conn { struct hash_desc conn_tx_hash; /* Used for scheduling TX and RX connection kthreads */ cpumask_var_t conn_cpumask; - int conn_rx_reset_cpumask:1; - int conn_tx_reset_cpumask:1; + unsigned int conn_rx_reset_cpumask:1; + unsigned int conn_tx_reset_cpumask:1; /* list_head of struct iscsi_cmd for this connection */ struct list_head conn_cmd_list; struct list_head immed_queue_list; -- cgit v1.2.3-18-g5258 From e8904dc5008ef92f0f62391d6557f03f921eeb32 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 15 Jan 2012 19:33:30 +0100 Subject: iscsi-target: Fix up a few assignments A statement such as struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); has undefined behaviour since there are two assignments to 'na', strictly speaking (the order in which side-effects from the assignments take place is undefined since there's no intervening sequence point), and it looks unintentional in any case. Signed-off-by: Jesper Juhl Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 255c0d67e89..27901e37c12 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -1238,7 +1238,7 @@ void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd) { struct iscsi_conn *conn = cmd->conn; struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); spin_lock_bh(&cmd->dataout_timeout_lock); if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { @@ -1261,7 +1261,7 @@ void iscsit_start_dataout_timer( struct iscsi_conn *conn) { struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING) return; -- cgit v1.2.3-18-g5258 From 4949314c7283ea4f9ade182ca599583b89f7edd6 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Mon, 16 Jan 2012 16:57:08 -0800 Subject: target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 8 +++--- drivers/target/target_core_cdb.c | 28 ++++++++++----------- drivers/target/target_core_device.c | 4 +-- drivers/target/target_core_pr.c | 38 ++++++++++++++-------------- drivers/target/target_core_pscsi.c | 4 +-- drivers/target/target_core_transport.c | 45 +++++++++++++++++++++++++--------- 6 files changed, 75 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 1b1edd14f4b..01a2691dfb4 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -78,7 +78,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); spin_lock(&su_dev->t10_alua.tg_pt_gps_lock); list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list, @@ -163,7 +163,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) buf[2] = ((rd_len >> 8) & 0xff); buf[3] = (rd_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -194,7 +194,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed @@ -351,7 +351,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) } out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 2f2235edeff..07a3025d062 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -83,7 +83,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (dev == tpg->tpg_virt_lun0.lun_se_dev) { buf[0] = 0x3f; /* Not connected */ @@ -134,7 +134,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf[4] = 31; /* Set additional length to 31 */ out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -716,7 +716,7 @@ int target_emulate_inquiry(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = dev->transport->get_device_type(dev); @@ -733,7 +733,7 @@ int target_emulate_inquiry(struct se_task *task) ret = -EINVAL; out_unmap: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); out: if (!ret) { task->task_scsi_status = GOOD; @@ -755,7 +755,7 @@ int target_emulate_readcapacity(struct se_task *task) else blocks = (u32)blocks_long; - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 24) & 0xff; buf[1] = (blocks >> 16) & 0xff; @@ -771,7 +771,7 @@ int target_emulate_readcapacity(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) put_unaligned_be32(0xFFFFFFFF, &buf[0]); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -785,7 +785,7 @@ int target_emulate_readcapacity_16(struct se_task *task) unsigned char *buf; unsigned long long blocks = dev->transport->get_blocks(dev); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 56) & 0xff; buf[1] = (blocks >> 48) & 0xff; @@ -806,7 +806,7 @@ int target_emulate_readcapacity_16(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) buf[14] = 0x80; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1019,9 +1019,9 @@ int target_emulate_modesense(struct se_task *task) offset = cmd->data_length; } - rbuf = transport_kmap_first_data_page(cmd); + rbuf = transport_kmap_data_sg(cmd); memcpy(rbuf, buf, offset); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1043,7 +1043,7 @@ int target_emulate_request_sense(struct se_task *task) return -ENOSYS; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* @@ -1089,7 +1089,7 @@ int target_emulate_request_sense(struct se_task *task) } end: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; @@ -1123,7 +1123,7 @@ int target_emulate_unmap(struct se_task *task) dl = get_unaligned_be16(&cdb[0]); bd_dl = get_unaligned_be16(&cdb[2]); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); ptr = &buf[offset]; pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" @@ -1147,7 +1147,7 @@ int target_emulate_unmap(struct se_task *task) } err: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (!ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index de5f4fea7f6..edbcabbf85f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -657,7 +657,7 @@ int target_report_luns(struct se_task *se_task) unsigned char *buf; u32 cdb_offset = 0, lun_count = 0, offset = 8, i; - buf = transport_kmap_first_data_page(se_cmd); + buf = (unsigned char *) transport_kmap_data_sg(se_cmd); /* * If no struct se_session pointer is present, this struct se_cmd is @@ -695,7 +695,7 @@ int target_report_luns(struct se_task *se_task) * See SPC3 r07, page 159. */ done: - transport_kunmap_first_data_page(se_cmd); + transport_kunmap_data_sg(se_cmd); lun_count *= 8; buf[0] = ((lun_count >> 24) & 0xff); buf[1] = ((lun_count >> 16) & 0xff); diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 68c71cd7a88..b7c779389ee 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -15