From bfad9ceac5d11318c99ae8a0d1e926a380a56edd Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 2 Aug 2008 19:49:40 +0200 Subject: [SCSI] sd: select CRC_T10DIF only when necessary Signed-off-by: Stefan Richter Acked-by: "Martin K. Petersen" Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c7f06298bd3..4e0322b1c1e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)" config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI - select CRC_T10DIF + select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, -- cgit v1.2.3-18-g5258 From d4538817287e56abc938900886301a5bdfafbfcd Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:32 +0200 Subject: [SCSI] zfcp: Fix request queue locking The request queue lock can be acquired from softirq context when the SCSI midlayer issues commands. Disable softirqs for this lock when commands are issued from zfcp. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 56 +++++++++++++++++++++---------------------- drivers/s390/scsi/zfcp_qdio.c | 4 ++-- 2 files changed, 30 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 19c1ca91387..aad33241a2e 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -710,10 +710,10 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue) { - spin_lock(&queue->lock); + spin_lock_bh(&queue->lock); if (atomic_read(&queue->count)) return 1; - spin_unlock(&queue->lock); + spin_unlock_bh(&queue->lock); return 0; } @@ -722,13 +722,13 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) long ret; struct zfcp_qdio_queue *req_q = &adapter->req_q; - spin_unlock(&req_q->lock); + spin_unlock_bh(&req_q->lock); ret = wait_event_interruptible_timeout(adapter->request_wq, zfcp_fsf_sbal_check(req_q), 5 * HZ); if (ret > 0) return 0; - spin_lock(&req_q->lock); + spin_lock_bh(&req_q->lock); return -EIO; } @@ -870,7 +870,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter) volatile struct qdio_buffer_element *sbale; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -910,7 +910,7 @@ failed_buf: zfcp_fsf_req_free(req); zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1106,7 +1106,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, struct zfcp_fsf_req *req; int ret = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1148,7 +1148,7 @@ failed_send: if (erp_action) erp_action->fsf_req = NULL; out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return ret; } @@ -1263,7 +1263,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) struct zfcp_adapter *adapter = erp_action->adapter; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; req = zfcp_fsf_req_create(adapter, @@ -1295,7 +1295,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1306,7 +1306,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, struct zfcp_fsf_req *req = NULL; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1334,7 +1334,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); @@ -1359,7 +1359,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) return -EOPNOTSUPP; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, @@ -1385,7 +1385,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1405,7 +1405,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) return -EOPNOTSUPP; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; @@ -1427,7 +1427,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); @@ -1531,7 +1531,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1562,7 +1562,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1603,7 +1603,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1633,7 +1633,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1700,7 +1700,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1731,7 +1731,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1875,7 +1875,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1910,7 +1910,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1965,7 +1965,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN, @@ -1995,7 +1995,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -2417,7 +2417,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, return ERR_PTR(-EINVAL); } - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -2447,7 +2447,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) { wait_event(req->completion_wq, diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index d6dbd653fde..69d632d851d 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter) /* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */ req_q = &adapter->req_q; - spin_lock(&req_q->lock); + spin_lock_bh(&req_q->lock); atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status); - spin_unlock(&req_q->lock); + spin_unlock_bh(&req_q->lock); qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR); -- cgit v1.2.3-18-g5258 From 47f7bba52b01dd881fbd17b4b50c89ecf186eee2 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:33 +0200 Subject: [SCSI] zfcp: Correctly query end flag in gpn_ft response When the last port entry in the gpn_ft response is already a known port, the eval function would skip the end flag and try to attach ports with wwpn 0. Fix this by checking the flag first. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e984469bb98..27edabe5b20 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -475,7 +475,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) struct zfcp_adapter *adapter = ct->port->adapter; struct zfcp_port *port, *tmp; u32 d_id; - int ret = 0, x; + int ret = 0, x, last = 0; if (ct->status) return -EIO; @@ -492,12 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) down(&zfcp_data.config_sema); /* first entry is the header */ - for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) { + for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) { if (x % (ZFCP_GPN_FT_ENTRIES + 1)) acc++; else acc = sg_virt(++sg); + last = acc->control & 0x80; d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 | acc->port_id[2]; @@ -513,8 +514,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) ret = PTR_ERR(port); else zfcp_erp_port_reopen(port, 0, 149, NULL); - if (acc->control & 0x80) /* last entry */ - break; } zfcp_erp_wait(adapter); -- cgit v1.2.3-18-g5258 From f48bf7fb00f74d93105ba69522a3f6c9435d6af3 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:34 +0200 Subject: [SCSI] zfcp: Simplify ccw notify handler The notify handler does not change the list of adapters, it only triggers erp actions to open or shutdown the adapter. We don't need to hold the config semaphore and wait for the erp to complete. This is a prerequisite for a fix in the s390 common i/o code. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ccw.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 391dd29749f..51b6a05f4d1 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) */ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) { - struct zfcp_adapter *adapter; + struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev); - down(&zfcp_data.config_sema); - adapter = dev_get_drvdata(&ccw_device->dev); switch (event) { case CIO_GONE: dev_warn(&adapter->ccw_device->dev, "device gone\n"); @@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) 89, NULL); break; } - zfcp_erp_wait(adapter); - up(&zfcp_data.config_sema); return 1; } -- cgit v1.2.3-18-g5258 From 9528539cc2d506aa232b0d93881ac4d19738752f Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 21 Aug 2008 13:43:35 +0200 Subject: [SCSI] zfcp: Fix reference counter for remote ports Fix the remote port reference counter handling during ELS ADISC commands and find the remote port by WWPN not by D_IDs that could change. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 27edabe5b20..05e6b09c48f 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -39,18 +39,6 @@ struct zfcp_gpn_ft { struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS]; }; -static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter, - u32 d_id) -{ - struct zfcp_port *port; - - list_for_each_entry(port, &adapter->port_list_head, list) - if ((port->d_id == d_id) && - !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status)) - return port; - return NULL; -} - static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { @@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port) zfcp_port_get(port); retval = zfcp_fc_adisc(port); - if (retval == 0 || retval == -EBUSY) + if (retval == 0) return; /* send of ADISC was not possible */ zfcp_port_put(port); - zfcp_erp_port_forced_reopen(port, 0, 65, NULL); + if (retval != -EBUSY) + zfcp_erp_port_forced_reopen(port, 0, 65, NULL); } static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter) @@ -503,9 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) acc->port_id[2]; /* skip the adapter's port and known remote ports */ - if (acc->wwpn == fc_host_port_name(adapter->scsi_host) || - zfcp_get_port_by_did(adapter, d_id)) + if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; + port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); + if (port) { + zfcp_port_get(port); + continue; + } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_PORT_DID_DID | -- cgit v1.2.3-18-g5258 From 6139308dca9437975125290698cb9306240f525c Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 21 Aug 2008 13:43:36 +0200 Subject: [SCSI] zfcp: channel cannot be detached due to refcount imbalance Due to an imbalance of the nameserver refcounting, channel devices couldn't be take offline anymore after the channel was activated. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 05e6b09c48f..56196c98c07 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -352,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter) if (ret) return ret; zfcp_erp_wait(adapter); - zfcp_port_put(adapter->nameserver_port); } return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->nameserver_port->status); -- cgit v1.2.3-18-g5258 From 025270f0eaa2def673747ed6f77cca41f694f354 Mon Sep 17 00:00:00 2001 From: Hirofumi Nakagawa Date: Thu, 21 Aug 2008 13:43:37 +0200 Subject: [SCSI] zfcp: Remove duplicated unlikely() macros. Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless codes although there is no real effect on the kernel's behaviour. Signed-off-by: Hirofumi Nakagawa Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index aad33241a2e..49dbeb754e5 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -877,7 +877,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter) req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS, ZFCP_REQ_NO_QTCB, adapter->pool.fsf_req_status_read); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -988,7 +988,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (unlikely(IS_ERR(req))) + if (IS_ERR(req)) goto out; if (unlikely(!(atomic_read(&unit->status) & @@ -1112,7 +1112,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC, ZFCP_REQ_AUTO_CLEANUP, pool); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { ret = PTR_ERR(req); goto out; } @@ -1223,7 +1223,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS, ZFCP_REQ_AUTO_CLEANUP, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { ret = PTR_ERR(req); goto out; } @@ -1270,7 +1270,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) FSF_QTCB_EXCHANGE_CONFIG_DATA, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1312,7 +1312,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1365,7 +1365,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1411,7 +1411,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1539,7 +1539,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) FSF_QTCB_OPEN_PORT_WITH_DID, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1610,7 +1610,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1707,7 +1707,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1882,7 +1882,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1971,7 +1971,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -2228,7 +2228,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -2351,7 +2351,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (unlikely(IS_ERR(req))) + if (IS_ERR(req)) goto out; req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; @@ -2422,7 +2422,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = -EPERM; goto out; } -- cgit v1.2.3-18-g5258 From c7dbb627a2505f42b2e6b3581f3716d73453dd0c Mon Sep 17 00:00:00 2001 From: Mike Anderson Date: Tue, 12 Aug 2008 12:11:57 -0700 Subject: [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE Change scsi_dh check_sense functions to return ADD_TO_MLQUEUE to allow retries to occur without restriction of blk_noretry_request check. Signed-off-by: Mike Anderson Acked-by: Chandra Seetharaman Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_alua.c | 12 ++++++------ drivers/scsi/device_handler/scsi_dh_emc.c | 4 ++-- drivers/scsi/device_handler/scsi_dh_rdac.c | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 994da56fffe..708e475896b 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev, /* * LUN Not Accessible - ALUA state transition */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b) /* * LUN Not Accessible -- Target port in standby state @@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) { /* * ALUA state changed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) { /* * Implicit ALUA state transition failed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } break; } @@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state, if (!err) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } @@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (err == NEEDS_RETRY) + if (err == ADD_TO_MLQUEUE) goto retry; sdev_printk(KERN_INFO, sdev, "%s: rtpg sense code %02x/%02x/%02x\n", diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index b9d23e9e9a4..ef693e8412e 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev, * Unit Attention Code. This is the first IO * to the new path, so just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } @@ -514,7 +514,7 @@ retry: return SCSI_DH_IO; err = clariion_check_sense(sdev, &sshdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 2dee69da35c..6e2f130d56d 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -551,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev, * * Just retry and wait. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; case ILLEGAL_REQUEST: if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { @@ -568,7 +568,7 @@ static int rdac_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } /* success just means we do not care what scsi-ml does */ -- cgit v1.2.3-18-g5258 From bb0003c1e189d5766b6b39299b08c690c985c4dc Mon Sep 17 00:00:00 2001 From: Mike Anderson Date: Tue, 12 Aug 2008 12:11:58 -0700 Subject: [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry Change scsi_check_sense HARDWARE_ERROR check to return ADD_TO_MLQUEUE if device->retry_hwerror is set to allow retries to occur without restriction of blk_noretry_request check. Signed-off-by: Mike Anderson Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 880051c89bd..39ce3aba1da 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) case HARDWARE_ERROR: if (scmd->device->retry_hwerror) - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; else return SUCCESS; -- cgit v1.2.3-18-g5258 From 01b291bd66564b4bd826326af6bd0b6d17e99439 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 21 Aug 2008 15:14:14 -0500 Subject: [SCSI] fix check of PQ and PDT bits for WLUNs For IBM z series certain LUNs can no longer be accessed. This is because kernel version 2.6.19 a check was introduced not to create a generic SCSI device for devices that return PQ=1 and PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should be created unconditionally without looking at the PQ bit, so add a check for WLUNs in with this test. Acked-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 84b4879cff1..34d0de6cd51 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * PDT=1Fh none (no FDD connected to the requested logical unit) */ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && - (result[0] & 0x1f) == 0x1f) { + (result[0] & 0x1f) == 0x1f && + !scsi_is_wlun(lun)) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: peripheral device type" " of 31, no device added\n")); -- cgit v1.2.3-18-g5258 From c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Tue, 2 Sep 2008 10:19:29 +0200 Subject: i.MX serial: fix init failure Adds extra "out" label to probe function after calling .init form platform data. Because .init can return error number caused by gpio request fail. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6a29f9330a7..20189c447e9 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1133,13 +1133,19 @@ static int serial_imx_probe(struct platform_device *pdev) if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; - if (pdata->init) - pdata->init(pdev); + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } uart_add_one_port(&imx_reg, &sport->port); platform_set_drvdata(pdev, &sport->port); return 0; +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: -- cgit v1.2.3-18-g5258 From 4411805b13d4b8c31870b276c2730d585b062db7 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 12:10:34 +0200 Subject: imx serial: set RXD mux bit on i.MX27 and i.MX31 RX in i.MX27 and i.MX31 UART lines does not work unless the "RXD Muxed Input Select" bit is set on i.MX27 and i.MX31 processors. This patch sets the missing RXD mux bit in the UCR3 register. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 20189c447e9..312653e2f71 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -127,8 +127,13 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#ifdef CONFIG_ARCH_IMX +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#endif +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 +#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#endif #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ @@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port) temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 + temp = readl(sport->port.membase + UCR3); + temp |= UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); +#endif + /* * Enable modem status interrupts */ -- cgit v1.2.3-18-g5258 From 9fbe604456c5ae21768f1c98379e1b81c72adcd3 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 21:26:01 +0200 Subject: imx serial: fix rts handling for non imx1 based hardware The interrupt handler for muxed interrupts (imx2/imx3) was calling the rts handling subroutine if the RTSS bit was set. (Which indicates the status of the RTS line), leading to an interrupt flood on RTS bit low. This patch fixes the problem by looking at the RTSD bit instead, indicating a change in the RTS line. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 312653e2f71..3f90f1bbbbc 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -450,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) imx_txint(irq, dev_id); - if (sts & USR1_RTSS) + if (sts & USR1_RTSD) imx_rtsint(irq, dev_id); return IRQ_HANDLED; -- cgit v1.2.3-18-g5258 From cbda1ba898647aeb4ee770b803c922f595e97731 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 7 Sep 2008 16:35:26 +0100 Subject: PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets Some BIOSes (the Intel DG33BU, for example) wrongly claim to have DMAR when they don't. Avoid the resulting crashes when it doesn't work as expected. Signed-off-by: David Woodhouse Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes --- drivers/pci/intel-iommu.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8d0e60ac849..c3edcdc08e7 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void) } +static int blacklist_iommu(const struct dmi_system_id *id) +{ + printk(KERN_INFO "%s detected; disabling IOMMU\n", + id->ident); + dmar_disabled = 1; + return 0; +} + +static struct dmi_system_id __initdata intel_iommu_dmi_table[] = { + { /* Some DG33BU BIOS revisions advertised non-existent VT-d */ + .callback = blacklist_iommu, + .ident = "Intel DG33BU", + { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "DG33BU"), + } + }, + { } +}; + + void __init detect_intel_iommu(void) { if (swiotlb || no_iommu || iommu_detected || dmar_disabled) return; if (early_dmar_detect()) { + dmi_check_system(intel_iommu_dmi_table); + if (dmar_disabled) + return; iommu_detected = 1; } } -- cgit v1.2.3-18-g5258 From 4ca8a7726fb0e8094fdb56f2ae2d69fcf9254eae Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Fri, 22 Aug 2008 20:46:59 +0200 Subject: PCI: Fix printk warnings in probe.c The cleaned up resource code in probe.c introduced some warnings: drivers/pci/probe.c: In function 'pci_read_bridge_bases': drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' So fix them up. Signed-off-by: Johann Felix Soden Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index cce2f4cb1fb..0ad936765b2 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -383,7 +383,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; if (!res->end) res->end = limit + 0xfff; - printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end); + printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", + pci_name(dev), (unsigned long long) res->start, + (unsigned long long) res->end); } res = child->resource[1]; @@ -395,7 +397,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end); + printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), + (unsigned long long) res->start, (unsigned long long) res->end); } res = child->resource[2]; @@ -431,7 +434,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end); + printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", + pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32", + (unsigned long long) res->start, (unsigned long long) res->end); } } -- cgit v1.2.3-18-g5258 From 53bc88701be91e7f631ad31418b32392aa952e9b Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Fri, 22 Aug 2008 20:25:10 +0200 Subject: PCI: Fix printk warnings in setup-bus.c Again, the cleaned up code introduced some resource warnings: drivers/pci/setup-bus.c: In function 'pci_bus_dump_res': drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'resource_size_t' Fix those up too. Signed-off-by: Johann Felix Soden Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 82634a2f1b1..c6ea4e97e8b 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -539,7 +539,11 @@ static void pci_bus_dump_res(struct pci_bus *bus) if (!res) continue; - printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end); + printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", + bus->number, i, + (res->flags & IORESOURCE_IO) ? "io port" : "mmio", + (unsigned long long) res->start, + (unsigned long long) res->end); } } -- cgit v1.2.3-18-g5258 From 48902025af4da44dbbc0231061e542d6d40e712e Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 5 Sep 2008 14:05:03 -0700 Subject: PCI Hotplug: fakephp: fix deadlock... again Commit fe99740cac117f208707488c03f3789cf4904957 (construct one fakephp slot per PCI slot) introduced a regression, causing a deadlock when removing a PCI device. We also never actually removed the device from the PCI core. So we: - remove the device from the PCI core - do not directly call remove_slot() to prevent deadlock Yu Zhao reported and diagnosed this defect. Signed-off-by: Alex Chiang Acked-by: Yu Zhao Cc: Matthew Wilcox Cc: Kristen Carlson Accardi Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/fakephp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 40337a06c18..146ca9cd156 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -320,15 +320,15 @@ static int disable_slot(struct hotplug_slot *slot) return -ENODEV; } + /* remove the device from the pci core */ + pci_remove_bus_device(dev); + /* queue work item to blow away this sysfs entry and other * parts. */ INIT_WORK(&dslot->remove_work, remove_slot_worker); queue_work(dummyphp_wq, &dslot->remove_work); - /* blow away this sysfs entry and other parts. */ - remove_slot(dslot); - pci_dev_put(dev); } return 0; -- cgit v1.2.3-18-g5258 From a5827f40afafc864f57a1c44915f0bfaf3d94f53 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 28 Aug 2008 01:05:26 +0300 Subject: PCI: fix pciehp_free_irq() This patch fixes an obvious bug (loop was never entered) caused by commit 820943b6fc4781621dee52ba026106758a727dd3 (pciehp: cleanup pcie_poll_cmd). Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Acked-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index ab31f5ba665..9d934ddee95 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -258,7 +258,7 @@ static int pcie_poll_cmd(struct controller *ctrl) return 1; } } - while (timeout > 1000) { + while (timeout > 0) { msleep(10); timeout -= 10; if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { -- cgit v1.2.3-18-g5258 From 62ff2ecf7a4e69f7271b7f7a57aaee76ffe610f2 Mon Sep 17 00:00:00 2001 From: Masoud Sharbiani Date: Wed, 10 Sep 2008 22:22:34 +0200 Subject: ide: Fix pointer arithmetic in hpt3xx driver code (3rd try) git commit 74811f355f4f69a187fa74892dcf2a684b84ce99 causes crash at module load (or boot) time on my machine with a hpt374 controller. The reason for this is that for initializing second controller which sets (hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which advances it by one byte instead of advancing it by sizeof(hpt_info) bytes. Because of this, all initialization functions get corrupted data in info variable which causes a crash at boot time. This patch fixes that and makes my machine boot again. The card itself is a HPT374 raid conroller: Here is the lspci -v output: 03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 8000 [size=8] I/O ports at 7800 [size=4] I/O ports at 7400 [size=8] I/O ports at 7000 [size=4] I/O ports at 6800 [size=256] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 9800 [size=8] I/O ports at 9400 [size=4] I/O ports at 9000 [size=8] I/O ports at 8800 [size=4] I/O ports at 8400 [size=256] Capabilities: [60] Power Management version 2 Signed-off-by: Masoud Sharbiani Cc: Sergei Shtylyov Cc: Andrew Morton [bart: use dev_get_drvdata() per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index eb107eef0db..c37ab174381 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) return 0; } +static struct hpt_info *hpt3xx_get_info(struct device *dev) +{ + struct ide_host *host = dev_get_drvdata(dev); + struct hpt_info *info = (struct hpt_info *)host->host_priv; + + return dev == host->dev[1] ? info + 1 : info; +} + /* * The Marvell bridge chips used on the HighPoint SATA cards do not seem * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... @@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 mask = hwif->ultra_mask; switch (info->chip_type) { @@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) static u8 hpt3xx_mdma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); switch (info->chip_type) { case HPT372 : @@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; @@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); if (drive->quirk_list) { if (info->chip_type >= HPT370) { @@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) { unsigned long io_base = pci_resource_start(dev, 4); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(&dev->dev); const char *name = DRV_NAME; u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ u8 chip_type; @@ -1217,8 +1218,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; @@ -1262,8 +1262,7 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); int serialize = HPT_SERIALIZE_IO; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; -- cgit v1.2.3-18-g5258 From 5368f69c8b155d6e82dfc622d817c882689e9cd9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Sep 2008 22:15:18 +0200 Subject: VIDEO_SH_MOBILE_CEU should depend on HAS_DMA commit 0d3244d6439c8c31d2a29efd587c7aca9042c8aa ("V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG. Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this. Signed-off-by: Geert Uytterhoeven Acked-by: Paul Mundt Acked-by: Magnus Damm Signed-off-by: Linus Torvalds --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ecbfa1b39b7..3e9e0dcd217 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -968,7 +968,7 @@ config VIDEO_PXA27x config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV + depends on VIDEO_DEV && HAS_DMA select SOC_CAMERA select VIDEOBUF_DMA_CONTIG ---help--- -- cgit v1.2.3-18-g5258 From 2dc75d3c3b49c64fd26b4832a7efb75546cb3fc5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 11 Sep 2008 14:20:23 +0200 Subject: block: disable sysfs parts of the disk command filter We still have life time issues with the sysfs command filter kobject, so disable it for 2.6.27 release. We can revisit this and make it work properly for 2.6.28, for 2.6.27 release it's too risky. Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 2 -- drivers/scsi/sd.c | 2 -- drivers/scsi/sr.c | 2 -- 3 files changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index f1489999cf9..49a8c589e34 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1933,7 +1933,6 @@ static void ide_cd_remove(ide_drive_t *drive) ide_proc_unregister_driver(drive, info->driver); - blk_unregister_filter(info->disk); del_gendisk(info->disk); ide_cd_put(info); @@ -2159,7 +2158,6 @@ static int ide_cd_probe(ide_drive_t *drive) g->fops = &idecd_ops; g->flags |= GENHD_FL_REMOVABLE; add_disk(g); - blk_register_filter(g); return 0; out_free_cd: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 2a2bc89aba8..e5e7d785645 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1875,7 +1875,6 @@ static int sd_probe(struct device *dev) dev_set_drvdata(dev, sdkp); add_disk(gd); - blk_register_filter(gd); sd_dif_config_host(sdkp); sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", @@ -1909,7 +1908,6 @@ static int sd_remove(struct device *dev) struct scsi_disk *sdkp = dev_get_drvdata(dev); device_del(&sdkp->dev); - blk_unregister_filter(sdkp->disk); del_gendisk(sdkp->disk); sd_shutdown(dev); diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 3292965bfd8..27f5bfd1def 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -656,7 +656,6 @@ static int sr_probe(struct device *dev) dev_set_drvdata(dev, cd); disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); - blk_register_filter(disk); sdev_printk(KERN_DEBUG, sdev, "Attached scsi CD-ROM %s\n", cd->cdi.name); @@ -895,7 +894,6 @@ static int sr_remove(struct device *dev) { struct scsi_cd *cd = dev_get_drvdata(dev); - blk_unregister_filter(cd->disk); del_gendisk(cd->disk); mutex_lock(&sr_ref_mutex); -- cgit v1.2.3-18-g5258 From 69da6b87fcb270f758fe75141c32e041f8db510c Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:50 +0300 Subject: ath9k: Assign seq# when mac80211 requests this Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. (This is a backport of patch w/ same title already in net-next-2.6. It is verified to fix http://bugzilla.kernel.org/show_bug.cgi?id=11394 and it should be acceptable for -rc due to the driver being new in 2.6.27.) Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/beacon.c | 13 +++++++++++++ drivers/net/wireless/ath9k/core.h | 1 + drivers/net/wireless/ath9k/main.c | 14 ++++++++++++++ 3 files changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index caf569401a3..00a0eaa0886 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) unsigned int curlen; struct ath_txq *cabq; struct ath_txq *mcastq; + struct ieee80211_tx_info *info; avp = sc->sc_vaps[if_id]; mcastq = &avp->av_mcastq; @@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) */ curlen = skb->len; + info = IEEE80211_SKB_CB(skb); + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + /* + * TODO: make sure the seq# gets assigned properly (vs. other + * TX frames) + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + /* XXX: spin_lock_bh should not be used here, but sparse bitches * otherwise. We should fix sparse :) */ spin_lock_bh(&mcastq->axq_lock); diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 673b3d81133..4ee695b76b8 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -992,6 +992,7 @@ struct ath_softc { u32 sc_txintrperiod; /* tx interrupt batching */ int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */ u32 sc_ant_tx[8]; /* recent tx frames/antenna */ + u16 seq_no; /* TX sequence number */ /* Beacon */ struct ath9k_tx_queue_info sc_beacon_qi; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index c5107f269f2..99badf1404c 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw, { struct ath_softc *sc = hw->priv; int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } /* Add the padding after the header if this is not already done */ hdrlen = ieee80211_get_hdrlen_from_skb(skb); -- cgit v1.2.3-18-g5258 From cff502a38394fd33693f6233e03fca363dfa956d Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 12 Sep 2008 16:04:26 -0700 Subject: niu: panic on reset The reset_task function in the niu driver does not reset the tx and rx buffers properly. This leads to panic on reset. This patch is a modified implementation of the previously posted fix. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'drivers') diff --git a/drivers/net/niu.c b/drivers/net/niu.c index e4765b713ab..e3be81eba8a 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -5984,6 +5984,56 @@ static void niu_netif_start(struct niu *np) niu_enable_interrupts(np, 1); } +static void niu_reset_buffers(struct niu *np) +{ + int i, j, k, err; + + if (np->rx_rings) { + for (i = 0; i < np->num_rx_rings; i++) { + struct rx_ring_info *rp = &np->rx_rings[i]; + + for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) { + struct page *page; + + page = rp->rxhash[j]; + while (page) { + struct page *next = + (struct page *) page->mapping; + u64 base = page->index; + base = base >> RBR_DESCR_ADDR_SHIFT; + rp->rbr[k++] = cpu_to_le32(base); + page = next; + } + } + for (; k < MAX_RBR_RING_SIZE; k++) { + err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k); + if (unlikely(err)) + break; + } + + rp->rbr_index = rp->rbr_table_size - 1; + rp->rcr_index = 0; + rp->rbr_pending = 0; + rp->rbr_refill_pending = 0; + } + } + if (np->tx_rings) { + for (i = 0; i < np->num_tx_rings; i++) { + struct tx_ring_info *rp = &np->tx_rings[i]; + + for (j = 0; j < MAX_TX_RING_SIZE; j++) { + if (rp->tx_buffs[j].skb) + (void) release_tx_packet(np, rp, j); + } + + rp->pending = MAX_TX_RING_SIZE; + rp->prod = 0; + rp->cons = 0; + rp->wrap_bit = 0; + } + } +} + static void niu_reset_task(struct work_struct *work) { struct niu *np = container_of(work, struct niu, reset_task); @@ -6006,6 +6056,12 @@ static void niu_reset_task(struct work_struct *work) niu_stop_hw(np); + spin_unlock_irqrestore(&np->lock, flags); + + niu_reset_buffers(np); + + spin_lock_irqsave(&np->lock, flags); + err = niu_init_hw(np); if (!err) { np->timer.expires = jiffies + HZ; -- cgit v1.2.3-18-g5258 From 395a125c6237802b19bf22b41017c99ff57f1024 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 9 Sep 2008 12:27:52 -0700 Subject: PCI: re-add debug prints for unmodified BARs Print out for device BAR values before the kernel tries to update them. Also make related output use KERN_DEBUG. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 0ad936765b2..36698e57b97 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -304,6 +304,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, } else { res->start = l64; res->end = l64 + sz64; + printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n", + pci_name(dev), pos, (unsigned long long)res->start, + (unsigned long long)res->end); } } else { sz = pci_size(l, sz, mask); @@ -313,6 +316,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->start = l; res->end = l + sz; + printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev), + pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio", + (unsigned long long)res->start, (unsigned long long)res->end); } out: @@ -383,7 +389,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; if (!res->end) res->end = limit + 0xfff; - printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", + printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), (unsigned long long) res->start, (unsigned long long) res->end); } @@ -397,8 +403,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), - (unsigned long long) res->start, (unsigned long long) res->end); + printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", + pci_name(dev), (unsigned long long) res->start, + (unsigned long long) res->end); } res = child->resource[2]; @@ -434,7 +441,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", + printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32", (unsigned long long) res->start, (unsigned long long) res->end); } -- cgit v1.2.3-18-g5258 From 632480ea6548ae66e89a49ef037fd593c7a52418 Mon Sep 17 00:00:00 2001 From: Jürgen Schindele Date: Mon, 8 Sep 2008 22:06:29 +0100 Subject: [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia Fix warning when compiling "drivers/pcmcia/soc-common.c" The return value of the function "device_create_file" was not used / assigned. Signed-off-by: Jrgen Schindele Signed-off-by: Russell King --- drivers/pcmcia/soc_common.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index c48f3f69bda..da397215322 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops add_timer(&skt->poll_timer); - device_create_file(&skt->socket.dev, &dev_attr_status); + ret = device_create_file(&skt->socket.dev, &dev_attr_status); + if (ret) + goto out_err_8; } dev_set_drvdata(dev, sinfo); @@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops do { skt = &sinfo->skt[i]; + device_remove_file(&skt->socket.dev, &dev_attr_status); + out_err_8: del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); -- cgit v1.2.3-18-g5258 From da3ceb2288d0b50373b69d57a81c34fdd7cd11aa Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 8 Sep 2008 09:31:39 -0700 Subject: ata: duplicate variable sparse warning drivers/ata/ata_piix.c:1502:7: warning: symbol 'rc' shadows an earlier one Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b1d08a8f500..e6b4606e36b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1499,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, * off. */ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) { - int rc = piix_disable_ahci(pdev); + rc = piix_disable_ahci(pdev); if (rc) return rc; } -- cgit v1.2.3-18-g5258 From 99580664aa83ca04bb52988d504a4195b41833b0 Mon Sep 17 00:00:00 2001 From: Bob Stewart Date: Thu, 11 Sep 2008 11:50:03 +0200 Subject: sata_inic162x: enable LED blinking Enable LED blinking. Signed-off-by: Bob Stewart Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_inic162x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 3ead02fe379..5032c32fa50 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -96,6 +96,7 @@ enum { PORT_SCR = 0x20, /* HOST_CTL bits */ + HCTL_LEDEN = (1 << 3), /* enable LED operation */ HCTL_IRQOFF = (1 << 8), /* global IRQ off */ HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ @@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) void __iomem *port_base = inic_port_base(ap); /* fire up the ADMA engine */ - writew(HCTL_FTHD0, port_base + HOST_CTL); + writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); writeb(0, port_base + PORT_CPB_PTQFIFO); -- cgit v1.2.3-18-g5258 From 53604dbe1371c3c4458c2d741adbd8cfd8fe8e79 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sat, 13 Sep 2008 02:33:14 -0700 Subject: spi_mpc83xx: fix clockrate calculation for low speed Commit a61f5345 (spi_mpc83xx clockrate fixes) broke clockrate calculation for low speeds. SPMODE_DIV16 should be set if the divider is higher than 64, not only if the divider gets clipped to 1024. Furthermore, the clipping check was off by a factor 16 as well. Signed-off-by: Peter Korsgaard Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_mpc83xx.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index 070c6219e2d..ab7ee445d8b 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -267,16 +267,13 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) cs->hw_mode |= SPMODE_LEN(bits_per_word); if ((mpc83xx_spi->spibrg / hz) > 64) { + cs->hw_mode |= SPMODE_DIV16; pm = mpc83xx_spi->spibrg / (hz * 64); if (pm > 16) { - cs->hw_mode |= SPMODE_DIV16; - pm /= 16; - if (pm > 16) { - dev_err(&spi->dev, "Requested speed is too " - "low: %d Hz. Will use %d Hz instead.\n", - hz, mpc83xx_spi->spibrg / 1024); - pm = 16; - } + dev_err(&spi->dev, "Requested speed is too " + "low: %d Hz. Will use %d Hz instead.\n", + hz, mpc83xx_spi->spibrg / 1024); + pm = 16; } } else pm = mpc83xx_spi->spibrg / (hz * 4); -- cgit v1.2.3-18-g5258 From aa77d96ba94326db4f50d2aa36602824dd03286a Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sat, 13 Sep 2008 02:33:15 -0700 Subject: spi_mpc83xx: reject invalid transfer sizes Error out on transfer length != multiple of bytes per word with -EINVAL. Fixes a buffer overrun crash if length < bytes per word. Signed-off-by: Peter Korsgaard Acked-by: Joakim Tjernlund Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_mpc83xx.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index ab7ee445d8b..ac0e3e4b3c5 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -312,11 +312,20 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t) if (t->bits_per_word) bits_per_word = t->bits_per_word; len = t->len; - if (bits_per_word > 8) + if (bits_per_word > 8) { + /* invalid length? */ + if (len & 1) + return -EINVAL; len /= 2; - if (bits_per_word > 16) + } + if (bits_per_word > 16) { + /* invalid length? */ + if (len & 1) + return -EINVAL; len /= 2; + } mpc83xx_spi->count = len; + INIT_COMPLETION(mpc83xx_spi->done); /* enable rx ints */ -- cgit v1.2.3-18-g5258 From 8423597d676615f3dd2d9ab36f59f147086b90b8 Mon Sep 17 00:00:00 2001 From: Ned Forrester Date: Sat, 13 Sep 2008 02:33:17 -0700 Subject: pxa2xx_spi: chipselect bugfixes Fixes several chipselect bugs in the pxa2xx_spi driver. These bugs are in all versions of this driver and prevent using it with chips like m25p16 flash. 1. The spi_transfer.cs_change flag is handled too early: before spi_transfer.delay_usecs applies, thus making the delay ineffective at holding chip select. 2. spi_transfer.delay_usecs is ignored on the last transfer of a message (likewise not holding chipselect long enough). 3. If spi_transfer.cs_change is set on the last transfer, the chip select is always disabled, instead of the intended meaning: optionally holding chip select enabled for the next message. Those first three bugs were fixed with a relocation of delays and chip select de-assertions. 4. If a message has the cs_change flag set on the last transfer, and had the chip select stayed enabled as requested (see 3, above), it would not have been disabled if the next message is for a different chip. Fixed by dropping chip select regardless of cs_change at end of a message, if there is no next message or if the next message is for a different chip. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by: Ned Forrester Cc: Vernon Sauder Cc: Eric Miao Signed-off-by: David Brownell Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 59 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 34c7c987568..a7b9070e1b4 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -144,7 +144,6 @@ struct driver_data { size_t tx_map_len; u8 n_bytes; u32 dma_width; - int cs_change; int (*write)(struct driver_data *drv_data); int (*read)(struct driver_data *drv_data); irqreturn_t (*transfer_handler)(struct driver_data *drv_data); @@ -406,8 +405,45 @@ static void giveback(struct driver_data *drv_data) struct spi_transfer, transfer_list); + /* Delay if requested before any change in chip select */ + if (last_transfer->delay_usecs) + udelay(last_transfer->delay_usecs); + + /* Drop chip select UNLESS cs_change is true or we are returning + * a message with an error, or next message is for another chip + */ if (!last_transfer->cs_change) drv_data->cs_control(PXA2XX_CS_DEASSERT); + else { + struct spi_message *next_msg; + + /* Holding of cs was hinted, but we need to make sure + * the next message is for the same chip. Don't waste + * time with the following tests unless this was hinted. + * + * We cannot postpone this until pump_messages, because + * after calling msg->complete (below) the driver that + * sent the current message could be unloaded, which + * could invalidate the cs_control() callback... + */ + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue)) + next_msg = NULL; + else + next_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&drv_data->lock, flags); + + /* see if the next and current messages point + * to the same chip + */ + if (next_msg && next_msg->spi != msg->spi) + next_msg = NULL; + if (!next_msg || msg->state == ERROR_STATE) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + } msg->state = NULL; if (msg->complete) @@ -490,10 +526,9 @@ static void dma_transfer_complete(struct driver_data *drv_data) msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); - /* Release chip select if requested, transfer delays are - * handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(PXA2XX_CS_DEASSERT); + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ /* Move to next transfer */ msg->state = next_transfer(drv_data); @@ -602,10 +637,9 @@ static void int_transfer_complete(struct driver_data *drv_data) drv_data->cur_msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); - /* Release chip select if requested, transfer delays are - * handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(PXA2XX_CS_DEASSERT); + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ /* Move to next transfer */ drv_data->cur_msg->state = next_transfer(drv_data); @@ -840,13 +874,17 @@ static void pump_transfers(unsigned long data) return; } - /* Delay if requested at end of transfer*/ + /* Delay if requested at end of transfer before CS change */ if (message->state == RUNNING_STATE) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, transfer_list); if (previous->delay_usecs) udelay(previous->delay_usecs); + + /* Drop chip select only if cs_change is requested */ + if (previous->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); } /* Check transfer length */ @@ -878,7 +916,6 @@ static void pump_transfers(unsigned long data) drv_data->len = transfer->len & DCMD_LENGTH; drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; - drv_data->cs_change = transfer->cs_change; /* Change speed and bit per word on a per transfer */ cr0 = chip->cr0; -- cgit v1.2.3-18-g5258 From 7e96445533ac3f4f7964646a202ff3620602fab4 Mon Sep 17 00:00:00 2001 From: Ned Forrester Date: Sat, 13 Sep 2008 02:33:18 -0700 Subject: pxa2xx_spi: dma bugfixes Fixes two DMA bugs in the pxa2xx_spi driver. The first bug is in all versions of this driver; the second was introduced in the 2.6.20 kernel, and prevents using the driver with chips like m25p16 flash (which can issue large DMA reads). 1. Zero length transfers are permitted for use to insert timing, but pxa2xx_spi.c will fail if this is requested in DMA mode. Fixed by using programmed I/O (PIO) mode for such transfers. 2. Transfers larger than 8191 are not permitted in DMA mode. A test for length rejects all large transfers regardless of DMA or PIO mode. Worked around by rejecting only large transfers with DMA mapped buffers, and forcing all other transfers larger than 8191 to use PIO mode. A rate limited warning is issued for DMA transfers forced to PIO mode. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by: Ned Forrester Cc: Vernon Sauder Cc: Eric Miao Signed-off-by: David Brownell Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 57 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index a7b9070e1b4..0e53354c1cf 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -47,9 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define MAX_BUSES 3 -#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) -#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0) +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) +#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0) +#define MAX_DMA_LEN 8191 /* * for testing SSCR1 changes that require SSP restart, basically @@ -887,14 +888,27 @@ static void pump_transfers(unsigned long data) drv_data->cs_control(PXA2XX_CS_DEASSERT); } - /* Check transfer length */ - if (transfer->len > 8191) - { - dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer " - "length greater than 8191\n"); - message->status = -EINVAL; - giveback(drv_data); - return; + /* Check for transfers that need multiple DMA segments */ + if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + + /* reject already-mapped transfers; PIO won't always work */ + if (message->is_dma_mapped + || transfer->rx_dma || transfer->tx_dma) { + dev_err(&drv_data->pdev->dev, + "pump_transfers: mapped transfer length " + "of %lu is greater than %d\n", + transfer->len, MAX_DMA_LEN); + message->status = -EINVAL; + giveback(drv_data); + return; + } + + /* warn ... we force this to PIO mode */ + if (printk_ratelimit()) + dev_warn(&message->spi->dev, "pump_transfers: " + "DMA disabled for transfer length %ld " + "greater than %d\n", + (long)drv_data->len, MAX_DMA_LEN); } /* Setup the transfer state based on the type of transfer */ @@ -962,7 +976,7 @@ static void pump_transfers(unsigned long data) &dma_thresh)) if (printk_ratelimit()) dev_warn(&message->spi->dev, - "pump_transfer: " + "pump_transfers: " "DMA burst size reduced to " "match bits_per_word\n"); } @@ -976,8 +990,23 @@ static void pump_transfers(unsigned long data) message->state = RUNNING_STATE; - /* Try to map dma buffer and do a dma transfer if successful */ - if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) { + /* Try to map dma buffer and do a dma transfer if successful, but + * only if the length is non-zero and less than MAX_DMA_LEN. + * + * Zero-length non-descriptor DMA is illegal on PXA2xx; force use + * of PIO instead. Care is needed above because the transfer may + * have have been passed with buffers that are already dma mapped. + * A zero-length transfer in PIO mode will not try to write/read + * to/from the buffers + * + * REVISIT large transfers are exactly where we most want to be + * using DMA. If this happens much, split those transfers into + * multiple DMA segments rather than forcing PIO. + */ + drv_data->dma_mapped = 0; + if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN) + drv_data->dma_mapped = map_dma_buffers(drv_data); + if (drv_data->dma_mapped) { /* Ensure we have the correct interrupt handler */ drv_data->transfer_handler = dma_transfer; -- cgit v1.2.3-18-g5258 From 8275d102f8dbaa4f437f6b03b00d85bfb4e16025 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 13 Sep 2008 02:33:22 -0700 Subject: ia64: fix panic during `modprobe -r xpc' If you are on ia64 and you modprobe xpc then modprobe -r xpc, you immediately get a panic. xpc depends on xp which depends on gru for a symbol. That symbol is only used when we are running on UV hardware. Currently, the GRU driver detects we are not on UV hardware and does no initializing. It does not do the same check when unloading. As a result, the gru driver attempts to tear down stuff that was not setup. This is a simple two-line workaround to get us through this release. Once 2.6.28 is opened, we need to rework the symbols that xp is depending on from gru so the gru driver can properly fail to load when hardware is not available. Signed-off-by: Robin Holt Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grufile.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 23c91f5f6b6..d61cee796ef 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -445,6 +445,9 @@ static void __exit gru_exit(void) int order = get_order(sizeof(struct gru_state) * GRU_CHIPLETS_PER_BLADE); + if (!IS_UV()) + return; + for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) free_irq(IRQ_GRU + i, NULL); -- cgit v1.2.3-18-g5258 From 3aa04f1b07352be89960bddca4db0d5d8c09510c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sat, 13 Sep 2008 02:33:23 -0700 Subject: atmel_lcdfb: disable LCD and DMA engines when suspending When suspending the system with atmel_lcdfb enabled, I sometimes see this: atmel_lcdfb atmel_lcdfb.0: FIFO underflow 0x10 Which can be explained by the fact that we're not stopping the LCD controller and its DMA engine when suspending, we're just gating the clocks to them. There's another potential issue which may be harder to trigger but much more nasty: If we gate the clocks at _just_ the right moment, e.g. when the DMA engine is doing a bus transaction, we may cause the DMA engine to violate the system bus protocol and cause a lockup. Avoid these issues by shutting down the LCD controller before entering suspend (and restarting it when resuming). This prevents the underrun from happening in the first place, and prevents whatever nastiness is happening when the bus clock stops in the middle of a DMA transfer. Signed-off-by: Haavard Skinnemoen Acked-by: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 84 ++++++++++++++++++++++++++------------------- 1 file changed, 49 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 5a24c6411d3..75dac578104 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -208,6 +208,36 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) return value; } +static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo) +{ + /* Turn off the LCD controller and the DMA controller */ + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); + + /* Wait for the LCDC core to become idle */ + while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) + msleep(10); + + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); +} + +static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo) +{ + atmel_lcdfb_stop_nowait(sinfo); + + /* Wait for DMA engine to become idle... */ + while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) + msleep(10); +} + +static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo) +{ + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) + | ATMEL_LCDC_PWR); +} + static void atmel_lcdfb_update_dma(struct fb_info *info, struct fb_var_screeninfo *var) { @@ -420,26 +450,8 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo) { might_sleep(); - /* LCD power off */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); - - /* wait for the LCDC core to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) - msleep(10); - - /* DMA disable */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); - - /* wait for DMA engine to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) - msleep(10); - - /* LCD power on */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, - (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); - - /* DMA enable */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); + atmel_lcdfb_stop(sinfo); + atmel_lcdfb_start(sinfo); } /** @@ -471,14 +483,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) info->var.xres, info->var.yres, info->var.xres_virtual, info->var.yres_virtual); - /* Turn off the LCD controller and the DMA controller */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); - - /* Wait for the LCDC core to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) - msleep(10); - - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); + atmel_lcdfb_stop_nowait(sinfo); if (info->var.bits_per_pixel == 1) info->fix.visual = FB_VISUAL_MONO01; @@ -583,13 +588,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) msleep(10); - dev_dbg(info->device, " * re-enable DMA engine\n"); - /* ...and enable it with updated configuration */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); - - dev_dbg(info->device, " * re-enable LCDC core\n"); - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, - (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); + atmel_lcdfb_start(sinfo); dev_dbg(info->device, " * DONE\n"); @@ -1032,11 +1031,20 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) struct fb_info *info = platform_get_drvdata(pdev); struct atmel_lcdfb_info *sinfo = info->par; + /* + * We don't want to handle interrupts while the clock is + * stopped. It may take forever. + */ + lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); + sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(0); + + atmel_lcdfb_stop(sinfo); atmel_lcdfb_stop_clock(sinfo); + return 0; } @@ -1046,9 +1054,15 @@ static int atmel_lcdfb_resume(struct platform_device *pdev) struct atmel_lcdfb_info *sinfo = info->par; atmel_lcdfb_start_clock(sinfo); + atmel_lcdfb_start(sinfo); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(1); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon); + + /* Enable FIFO & DMA errors */ + lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI + | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); + return 0; } -- cgit v1.2.3-18-g5258 From 42cde4309b8f2671610be049352df2f8716e8809 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 13 Sep 2008 02:33:24 -0700 Subject: spi_s3c24xx: fix section warning Fix the section mismatch warning generated by the incorrect naming of s3c24xx_spidrv which should be s3c24xx_spi_driver: WARNING: drivers/spi/spi_s3c24xx.o(.data+0x4): Section mismatch in reference from the variable s3c24xx_spidrv to the (unknown reference) .exit.text:(unknown) Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 98abc73c1a1..3eb414b84a9 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -430,7 +430,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev) #endif MODULE_ALIAS("platform:s3c2410-spi"); -static struct platform_driver s3c24xx_spidrv = { +static struct platform_driver s3c24xx_spi_driver = { .remove = __exit_p(s3c24xx_spi_remove), .suspend = s3c24xx_spi_suspend, .resume = s3c24xx_spi_resume, @@ -442,12 +442,12 @@ static struct platform_driver s3c24xx_spidrv = { static int __init s3c24xx_spi_init(void) { - return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe); + return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe); } static void __exit s3c24xx_spi_exit(void) { - platform_driver_unregister(&s3c24xx_spidrv); + platform_driver_unregister(&s3c24xx_spi_driver); } module_init(s3c24xx_spi_init); -- cgit v1.2.3-18-g5258 From 8e82f8c34b1759ae0d80fe96101746ec51fb1ba4 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Sat, 13 Sep 2008 02:33:26 -0700 Subject: memstick: fix MSProHG 8-bit interface mode support - 8-bit interface mode never worked properly. The only adapter I have which supports the 8b mode (the Jmicron) had some problems with its clock wiring and they discovered it only now. We also discovered that ProHG media is more sensitive to the ordering of initialization commands. - Make the driver fall back to highest supported mode instead of always falling back to serial. The driver will attempt the switch to 8b mode for any new MSPro card, but not all of them support it. Previously, these new cards ended up in serial mode, which is not the best idea (they work fine with 4b, after all). - Edit some macros for better conformance to Sony documentation Signed-off-by: Alex Dubov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/memstick/core/memstick.c | 10 +++++----- drivers/memstick/core/mspro_block.c | 33 +++++++++++++++++++++++-------- drivers/memstick/host/jmb38x_ms.c | 39 +++++++++++++++++++++++++------------ 3 files changed, 57 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index a38005008a2..cea46906408 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -185,7 +185,7 @@ static void memstick_free(struct device *dev) } static struct class memstick_host_class = { - .name = "memstick_host", + .name = "memstick_host", .dev_release = memstick_free }; @@ -264,7 +264,7 @@ EXPORT_SYMBOL(memstick_new_req); * @sg - TPC argument */ void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc, - struct scatterlist *sg) + const struct scatterlist *sg) { mrq->tpc = tpc; if (tpc & 8) @@ -294,7 +294,7 @@ EXPORT_SYMBOL(memstick_init_req_sg); * user supplied buffer. */ void memstick_init_req(struct memstick_request *mrq, unsigned char tpc, - void *buf, size_t length) + const void *buf, size_t length) { mrq->tpc = tpc; if (tpc & 8) @@ -439,7 +439,7 @@ static void memstick_check(struct work_struct *work) if (!host->card) { if (memstick_power_on(host)) goto out_power_off; - } else + } else if (host->card->stop) host->card->stop(host->card); card = memstick_alloc_card(host); @@ -458,7 +458,7 @@ static void memstick_check(struct work_struct *work) || !(host->card->check(host->card))) { device_unregister(&host->card->dev); host->card = NULL; - } else + } else if (host->card->start) host->card->start(host->card); } diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 44b1817f2f2..d2d2318dafa 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -30,6 +30,8 @@ module_param(major, int, 0644); #define MSPRO_BLOCK_SIGNATURE 0xa5c3 #define MSPRO_BLOCK_MAX_ATTRIBUTES 41 +#define MSPRO_BLOCK_PART_SHIFT 3 + enum { MSPRO_BLOCK_ID_SYSINFO = 0x10, MSPRO_BLOCK_ID_MODELNAME = 0x15, @@ -195,7 +197,7 @@ static int mspro_block_bd_open(struct inode *inode, struct file *filp) static int mspro_block_disk_release(struct gendisk *disk) { struct mspro_block_data *msb = disk->private_data; - int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT; + int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT; mutex_lock(&mspro_block_disk_lock); @@ -877,6 +879,7 @@ static int mspro_block_switch_interface(struct memstick_dev *card) struct mspro_block_data *msb = memstick_get_drvdata(card); int rc = 0; +try_again: if (msb->caps & MEMSTICK_CAP_PAR4) rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4); else @@ -930,6 +933,18 @@ static int mspro_block_switch_interface(struct memstick_dev *card) rc = memstick_set_rw_addr(card); if (!rc) rc = mspro_block_set_interface(card, msb->system); + + if (!rc) { + msleep(150); + rc = mspro_block_wait_for_ced(card); + if (rc) + return rc; + + if (msb->caps & MEMSTICK_CAP_PAR8) { + msb->caps &= ~MEMSTICK_CAP_PAR8; + goto try_again; + } + } } return rc; } @@ -1117,14 +1132,16 @@ static int mspro_block_init_card(struct memstick_dev *card) return -EIO; msb->caps = host->caps; - rc = mspro_block_switch_interface(card); + + msleep(150); + rc = mspro_block_wait_for_ced(card); if (rc) return rc; - msleep(200); - rc = mspro_block_wait_for_ced(card); + rc = mspro_block_switch_interface(card); if (rc) return rc; + dev_dbg(&card->dev, "card activated\n"); if (msb->system != MEMSTICK_SYS_SERIAL) msb->caps |= MEMSTICK_CAP_AUTO_GET_INT; @@ -1192,12 +1209,12 @@ static int mspro_block_init_disk(struct memstick_dev *card) if (rc) return rc; - if ((disk_id << MEMSTICK_PART_SHIFT) > 255) { + if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) { rc = -ENOSPC; goto out_release_id; } - msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT); + msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT); if (!msb->disk) { rc = -ENOMEM; goto out_release_id; @@ -1220,7 +1237,7 @@ static int mspro_block_init_disk(struct memstick_dev *card) MSPRO_BLOCK_MAX_PAGES * msb->page_size); msb->disk->major = major; - msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT; + msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT; msb->disk->fops = &ms_block_bdops; msb->usage_count = 1; msb->disk->private_data = msb; @@ -1416,7 +1433,7 @@ out_unlock: static struct memstick_device_id mspro_block_id_tbl[] = { {MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO, - MEMSTICK_CLASS_GENERIC_DUO}, + MEMSTICK_CLASS_DUO}, {} }; diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 3485c63d20b..2fb95a5b72e 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -81,6 +81,8 @@ struct jmb38x_ms { #define TPC_CODE_SZ_MASK 0x00000700 #define TPC_DATA_SZ_MASK 0x00000007 +#define HOST_CONTROL_TDELAY_EN 0x00040000 +#define HOST_CONTROL_HW_OC_P 0x00010000 #define HOST_CONTROL_RESET_REQ 0x00008000 #define HOST_CONTROL_REI 0x00004000 #define HOST_CONTROL_LED 0x00000400 @@ -88,6 +90,7 @@ struct jmb38x_ms { #define HOST_CONTROL_RESET 0x00000100 #define HOST_CONTROL_POWER_EN 0x00000080 #define HOST_CONTROL_CLOCK_EN 0x00000040 +#define HOST_CONTROL_REO 0x00000008 #define HOST_CONTROL_IF_SHIFT 4 #define HOST_CONTROL_IF_SERIAL 0x0 @@ -133,11 +136,15 @@ struct jmb38x_ms { #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000 #define CLOCK_CONTROL_40MHZ 0x00000001 -#define CLOCK_CONTROL_50MHZ 0x00000002 +#define CLOCK_CONTROL_50MHZ 0x0000000a #define CLOCK_CONTROL_60MHZ 0x00000008 #define CLOCK_CONTROL_62_5MHZ 0x0000000c #define CLOCK_CONTROL_OFF 0x00000000 +#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0 +#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00 +#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000 + enum { CMD_READY = 0x01, FIFO_READY = 0x02, @@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh) return host->req->error; } - dev_dbg(&msh->dev, "control %08x\n", - readl(host->addr + HOST_CONTROL)); + dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL)); dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS)); dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS)); @@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host) ndelay(20); } dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n"); - return -EIO; + /* return -EIO; */ reset_next: writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN @@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, host_ctl = 7; host_ctl |= HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN; + | HOST_CONTROL_CLOCK_EN + | HOST_CONTROL_HW_OC_P + | HOST_CONTROL_TDELAY_EN; writel(host_ctl, host->addr + HOST_CONTROL); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 @@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, break; case MEMSTICK_INTERFACE: host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); + pci_read_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + &clock_delay); + clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B + : ~PCI_CTL_CLOCK_DLY_MASK_A; if (value == MEMSTICK_SERIAL) { host_ctl &= ~HOST_CONTROL_FAST_CLK; + host_ctl &= ~HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_SERIAL << HOST_CONTROL_IF_SHIFT; host_ctl |= HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 0; } else if (value == MEMSTICK_PAR4) { - host_ctl |= HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_PAR4 << HOST_CONTROL_IF_SHIFT; host_ctl &= ~HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 4; + clock_delay |= host->id ? (4 << 12) : (4 << 8); } else if (value == MEMSTICK_PAR8) { host_ctl |= HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_PAR8 << HOST_CONTROL_IF_SHIFT; - host_ctl &= ~HOST_CONTROL_REI; - clock_ctl = CLOCK_CONTROL_60MHZ; - clock_delay = 0; + host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO); + clock_ctl = CLOCK_CONTROL_50MHZ; } else return -EINVAL; + writel(host_ctl, host->addr + HOST_CONTROL); writel(clock_ctl, host->addr + CLOCK_CONTROL); - writel(clock_delay, host->addr + CLOCK_DELAY); + pci_write_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + clock_delay); break; }; return 0; -- cgit v1.2.3-18-g5258 From ba95487df97f9c45cfdae2a47de56235e7a13dc5 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Sun, 14 Sep 2008 13:41:19 -0700 Subject: crypto: talitos - Avoid consecutive packets going out with same IV The SEC's h/w IV out implementation DMAs the trailing encrypted payload block of the last encryption to ctx->iv. Since the last encryption may still be pending completion, we can sufficiently prevent successive packets from being transmitted with the same IV by xoring with sequence number. Also initialize alg_list earlier to prevent oopsing on a failed probe. Signed-off-by: Kim Phillips Signed-off-by: Lee Nipper Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index ee827a7f7c6..b6ad3ac5916 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1157,6 +1157,8 @@ static int aead_authenc_givencrypt( edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT; memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc)); + /* avoid consecutive packets going out with same IV */ + *(__be64 *)req->giv ^= cpu_to_be64(req->seq); return ipsec_esp(edesc, areq, req->giv, req->seq, ipsec_esp_encrypt_done); @@ -1449,6 +1451,8 @@ static int talitos_probe(struct of_device *ofdev, priv->ofdev = ofdev; + INIT_LIST_HEAD(&priv->alg_list); + tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev); tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev); @@ -1575,8 +1579,6 @@ static int talitos_probe(struct of_device *ofdev, } /* register crypto algorithms the device supports */ - INIT_LIST_HEAD(&priv->alg_list); - for (i = 0; i < ARRAY_SIZE(driver_algs); i++) { if (hw_supports(dev, driver_algs[i].desc_hdr_template)) { struct talitos_crypto_alg *t_alg; -- cgit v1.2.3-18-g5258 From e95926d05d028a6bf0ab60b21b484c3d622fdcd1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 16 Sep 2008 19:32:30 -0700 Subject: Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support" This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as Larry Finger reports causes the radio LED on his system to no longer respond to rfkill switch events. Reported-by: Larry Finger Requested-by: John W. Linville Signed-off-by: Linus Torvalds --- drivers/net/wireless/b43/rfkill.c | 18 ------------------ drivers/net/wireless/b43legacy/rfkill.c | 18 ------------------ 2 files changed, 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index fec5645944a..34ae125d538 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -43,23 +43,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43_rfkill_update_state(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -77,7 +60,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43_rfkill_update_state(dev); b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index 476add97e97..b32bf6a94f1 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev) -{ - struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43legacy_rfkill_update_state(dev); b43legacyinfo(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } -- cgit v1.2.3-18-g5258 From 49f276be7ce12d90b6941a000b09e61b68e6c4f2 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Sep 2008 16:04:12 -0700 Subject: hpplus: fix build regression This fixes kernel regression for 2.6.27-rc in http://bugzilla.kernel.org/show_bug.cgi?id=11547 The change to split 8390 into old isa and non-isa versions overlooked this driver. Signed-off-by: Stephen Hemminger Signed-off-by: Linus Torvalds --- drivers/net/hp-plus.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index 8239939554b..fbbd3e660c2 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -139,7 +139,7 @@ static int __init do_hpp_probe(struct net_device *dev) #ifndef MODULE struct net_device * __init hp_plus_probe(int unit) { - struct net_device *dev = alloc_ei_netdev(); + struct net_device *dev = alloc_eip_netdev(); int err; if (!dev) @@ -284,7 +284,7 @@ hpp_open(struct net_device *dev) int option_reg; int retval; - if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) { + if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { return retval; } @@ -302,7 +302,7 @@ hpp_open(struct net_device *dev) /* Select the operational page. */ outw(Perf_Page, ioaddr + HP_PAGING); - ei_open(dev); + eip_open(dev); return 0; } @@ -313,7 +313,7 @@ hpp_close(struct net_device *dev) int option_reg = inw(ioaddr + HPP_OPTION); free_irq(dev->irq, dev); - ei_close(dev); + eip_close(dev); outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset, ioaddr + HPP_OPTION); -- cgit v1.2.3-18-g5258