From 8343c89c4f1aac4fced7bb6919b0bdd0c13edcdc Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 31 Mar 2009 15:25:11 -0700 Subject: cirrusfb: acceleration improvements - Fix color expansion for 16bpp and 32bpp modes in the cirrusfb_RectFill(). - Make a function with a common blitter code (cirrusfb_set_blitter). - Add fb_sync function to allow a higher layer synchronize with the blitter. - Kill one redundant blitter reset. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 186 +++++++++++++++++++---------------------------- 1 file changed, 75 insertions(+), 111 deletions(-) (limited to 'drivers') diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index cac4e2b0cba..e4ac2f6d4d9 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -381,7 +381,7 @@ static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel, static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel, u_short x, u_short y, u_short width, u_short height, - u_char color, u_short line_length); + u32 color, u_short line_length); static void bestclock(long freq, int *nom, int *den, int *div); @@ -1550,9 +1550,6 @@ static void init_vgachip(struct fb_info *info) /* unlock all extension registers */ vga_wseq(cinfo->regbase, CL_SEQR6, 0x12); - /* reset blitter */ - vga_wgfx(cinfo->regbase, CL_GR31, 0x04); - switch (cinfo->btype) { case BT_GD5480: vga_wseq(cinfo->regbase, CL_SEQRF, 0x98); @@ -1747,6 +1744,17 @@ static void switch_monitor(struct cirrusfb_info *cinfo, int on) /* Linux 2.6-style accelerated functions */ /******************************************/ +static int cirrusfb_sync(struct fb_info *info) +{ + struct cirrusfb_info *cinfo = info->par; + + if (!is_laguna(cinfo)) { + while (vga_rgfx(cinfo->regbase, CL_GR31) & 0x03) + cpu_relax(); + } + return 0; +} + static void cirrusfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) { @@ -1966,6 +1974,7 @@ static struct fb_ops cirrusfb_ops = { .fb_blank = cirrusfb_blank, .fb_fillrect = cirrusfb_fillrect, .fb_copyarea = cirrusfb_copyarea, + .fb_sync = cirrusfb_sync, .fb_imageblit = cirrusfb_imageblit, }; @@ -2586,7 +2595,6 @@ static void RClut(struct cirrusfb_info *cinfo, unsigned char regnum, unsigned ch /* FIXME: use interrupts instead */ static void cirrusfb_WaitBLT(u8 __iomem *regbase) { - /* now busy-wait until we're done */ while (vga_rgfx(regbase, CL_GR31) & 0x08) cpu_relax(); } @@ -2597,58 +2605,12 @@ static void cirrusfb_WaitBLT(u8 __iomem *regbase) perform accelerated "scrolling" ********************************************************************/ -static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel, - u_short curx, u_short cury, - u_short destx, u_short desty, - u_short width, u_short height, - u_short line_length) -{ - u_short nwidth, nheight; - u_long nsrc, ndest; - u_char bltmode; - - nwidth = width - 1; - nheight = height - 1; - - bltmode = 0x00; - /* if source adr < dest addr, do the Blt backwards */ - if (cury <= desty) { - if (cury == desty) { - /* if src and dest are on the same line, check x */ - if (curx < destx) - bltmode |= 0x01; - } else - bltmode |= 0x01; - } - if (!bltmode) { - /* standard case: forward blitting */ - nsrc = (cury * line_length) + curx; - ndest = (desty * line_length) + destx; - } else { - /* this means start addresses are at the end, - * counting backwards - */ - nsrc = cury * line_length + curx + - nheight * line_length + nwidth; - ndest = desty * line_length + destx + - nheight * line_length + nwidth; - } - - /* - run-down of registers to be programmed: - destination pitch - source pitch - BLT width/height - source start - destination start - BLT mode - BLT ROP - VGA_GFX_SR_VALUE / VGA_GFX_SR_ENABLE: "fill color" - start/stop - */ - - cirrusfb_WaitBLT(regbase); +static void cirrusfb_set_blitter(u8 __iomem *regbase, + u_short nwidth, u_short nheight, + u_long nsrc, u_long ndest, + u_short bltmode, u_short line_length) +{ /* pitch: set to line_length */ /* dest pitch low */ vga_wgfx(regbase, CL_GR24, line_length & 0xff); @@ -2694,56 +2656,67 @@ static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel, vga_wgfx(regbase, CL_GR32, 0x0d); /* BLT ROP */ /* and finally: GO! */ - vga_wgfx(regbase, CL_GR31, 0x02); /* BLT Start/status */ + vga_wgfx(regbase, CL_GR31, 0x82); /* BLT Start/status */ } /******************************************************************* - cirrusfb_RectFill() + cirrusfb_BitBLT() - perform accelerated rectangle fill + perform accelerated "scrolling" ********************************************************************/ -static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel, - u_short x, u_short y, u_short width, u_short height, - u_char color, u_short line_length) +static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel, + u_short curx, u_short cury, + u_short destx, u_short desty, + u_short width, u_short height, + u_short line_length) { - u_short nwidth, nheight; - u_long ndest; - u_char op; - - nwidth = width - 1; - nheight = height - 1; + u_short nwidth = width - 1; + u_short nheight = height - 1; + u_long nsrc, ndest; + u_char bltmode; - ndest = (y * line_length) + x; + bltmode = 0x00; + /* if source adr < dest addr, do the Blt backwards */ + if (cury <= desty) { + if (cury == desty) { + /* if src and dest are on the same line, check x */ + if (curx < destx) + bltmode |= 0x01; + } else + bltmode |= 0x01; + } + /* standard case: forward blitting */ + nsrc = (cury * line_length) + curx; + ndest = (desty * line_length) + destx; + if (bltmode) { + /* this means start addresses are at the end, + * counting backwards + */ + nsrc += nheight * line_length + nwidth; + ndest += nheight * line_length + nwidth; + } cirrusfb_WaitBLT(regbase); - /* pitch: set to line_length */ - vga_wgfx(regbase, CL_GR24, line_length & 0xff); /* dest pitch low */ - vga_wgfx(regbase, CL_GR25, line_length >> 8); /* dest pitch hi */ - vga_wgfx(regbase, CL_GR26, line_length & 0xff); /* source pitch low */ - vga_wgfx(regbase, CL_GR27, line_length >> 8); /* source pitch hi */ + cirrusfb_set_blitter(regbase, nwidth, nheight, + nsrc, ndest, bltmode, line_length); +} - /* BLT width: actual number of pixels - 1 */ - vga_wgfx(regbase, CL_GR20, nwidth & 0xff); /* BLT width low */ - vga_wgfx(regbase, CL_GR21, nwidth >> 8); /* BLT width hi */ +/******************************************************************* + cirrusfb_RectFill() - /* BLT height: actual number of lines -1 */ - vga_wgfx(regbase, CL_GR22, nheight & 0xff); /* BLT height low */ - vga_wgfx(regbase, CL_GR23, nheight >> 8); /* BLT width hi */ + perform accelerated rectangle fill +********************************************************************/ - /* BLT destination */ - /* BLT dest low */ - vga_wgfx(regbase, CL_GR28, (u_char) (ndest & 0xff)); - /* BLT dest mid */ - vga_wgfx(regbase, CL_GR29, (u_char) (ndest >> 8)); - /* BLT dest hi */ - vga_wgfx(regbase, CL_GR2A, (u_char) (ndest >> 16)); +static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel, + u_short x, u_short y, u_short width, u_short height, + u32 color, u_short line_length) +{ + u_long ndest = (y * line_length) + x; + u_char op; - /* BLT source: set to 0 (is a dummy here anyway) */ - vga_wgfx(regbase, CL_GR2C, 0x00); /* BLT src low */ - vga_wgfx(regbase, CL_GR2D, 0x00); /* BLT src mid */ - vga_wgfx(regbase, CL_GR2E, 0x00); /* BLT src hi */ + cirrusfb_WaitBLT(regbase); /* This is a ColorExpand Blt, using the */ /* same color for foreground and background */ @@ -2751,29 +2724,20 @@ static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel, vga_wgfx(regbase, VGA_GFX_SR_ENABLE, color); /* background color */ op = 0xc0; - if (bits_per_pixel == 16) { - vga_wgfx(regbase, CL_GR10, color); /* foreground color */ - vga_wgfx(regbase, CL_GR11, color); /* background color */ - op = 0x50; + if (bits_per_pixel >= 16) { + vga_wgfx(regbase, CL_GR10, color >> 8); /* foreground color */ + vga_wgfx(regbase, CL_GR11, color >> 8); /* background color */ op = 0xd0; - } else if (bits_per_pixel == 32) { - vga_wgfx(regbase, CL_GR10, color); /* foreground color */ - vga_wgfx(regbase, CL_GR11, color); /* background color */ - vga_wgfx(regbase, CL_GR12, color); /* foreground color */ - vga_wgfx(regbase, CL_GR13, color); /* background color */ - vga_wgfx(regbase, CL_GR14, 0); /* foreground color */ - vga_wgfx(regbase, CL_GR15, 0); /* background color */ - op = 0x50; + } + if (bits_per_pixel == 32) { + vga_wgfx(regbase, CL_GR12, color >> 16);/* foreground color */ + vga_wgfx(regbase, CL_GR13, color >> 16);/* background color */ + vga_wgfx(regbase, CL_GR14, color >> 24);/* foreground color */ + vga_wgfx(regbase, CL_GR15, color >> 24);/* background color */ op = 0xf0; } - /* BLT mode: color expand, Enable 8x8 copy (faster?) */ - vga_wgfx(regbase, CL_GR30, op); /* BLT mode */ - - /* BLT ROP: SrcCopy */ - vga_wgfx(regbase, CL_GR32, 0x0d); /* BLT ROP */ - - /* and finally: GO! */ - vga_wgfx(regbase, CL_GR31, 0x02); /* BLT Start/status */ + cirrusfb_set_blitter(regbase, width - 1, height - 1, + 0, ndest, op, line_length); } /************************************************************************** -- cgit v1.2.3-18-g5258