From 0793a61d4df8daeac6492dbf8d2f3e5713caae5e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 4 Dec 2008 20:12:29 +0100 Subject: performance counters: core code Implement the core kernel bits of Performance Counters subsystem. The Linux Performance Counter subsystem provides an abstraction of performance counter hardware capabilities. It provides per task and per CPU counters, and it provides event capabilities on top of those. Performance counters are accessed via special file descriptors. There's one file descriptor per virtual counter used. The special file descriptor is opened via the perf_counter_open() system call: int perf_counter_open(u32 hw_event_type, u32 hw_event_period, u32 record_type, pid_t pid, int cpu); The syscall returns the new fd. The fd can be used via the normal VFS system calls: read() can be used to read the counter, fcntl() can be used to set the blocking mode, etc. Multiple counters can be kept open at a time, and the counters can be poll()ed. See more details in Documentation/perf-counters.txt. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- drivers/char/sysrq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index ce0d9da52a8..52146c2a8d9 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -244,6 +245,7 @@ static void sysrq_handle_showregs(int key, struct tty_struct *tty) struct pt_regs *regs = get_irq_regs(); if (regs) show_regs(regs); + perf_counter_print_debug(); } static struct sysrq_key_op sysrq_showregs_op = { .handler = sysrq_handle_showregs, -- cgit v1.2.3-18-g5258 From 4ac13294e44664bb7edf4daf52edb71e7c6bbe84 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 9 Dec 2008 21:43:39 +0100 Subject: perf counters: protect them against CSTATE transitions Impact: fix rare lost events problem There are CPUs whose performance counters misbehave on CSTATE transitions, so provide a way to just disable/enable them around deep idle methods. (hw_perf_enable_all() is cheap on x86.) Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- drivers/acpi/processor_idle.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 5f8d746a9b8..cca804e6f1d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -270,8 +270,11 @@ static atomic_t c3_cpu_count; /* Common C-state entry for C2, C3, .. */ static void acpi_cstate_enter(struct acpi_processor_cx *cstate) { + u64 pctrl; + /* Don't trace irqs off for idle */ stop_critical_timings(); + pctrl = hw_perf_disable_all(); if (cstate->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cstate); @@ -284,6 +287,7 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } + hw_perf_restore_ctrl(pctrl); start_critical_timings(); } #endif /* !CONFIG_CPU_IDLE */ @@ -1425,8 +1429,11 @@ static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr, */ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) { + u64 pctrl; + /* Don't trace irqs off for idle */ stop_critical_timings(); + pctrl = hw_perf_disable_all(); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); @@ -1441,6 +1448,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } + hw_perf_restore_ctrl(pctrl); start_critical_timings(); } -- cgit v1.2.3-18-g5258 From 01b2838c4298c5e0d30b4993c195ac34dd9df61e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 11 Dec 2008 13:45:51 +0100 Subject: perf counters: consolidate hw_perf save/restore APIs Impact: cleanup Rename them to better match up the usual IRQ disable/enable APIs: hw_perf_disable_all() => hw_perf_save_disable() hw_perf_restore_ctrl() => hw_perf_restore() Signed-off-by: Ingo Molnar --- drivers/acpi/processor_idle.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index cca804e6f1d..a3e66a33b7a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -270,11 +270,11 @@ static atomic_t c3_cpu_count; /* Common C-state entry for C2, C3, .. */ static void acpi_cstate_enter(struct acpi_processor_cx *cstate) { - u64 pctrl; + u64 perf_flags; /* Don't trace irqs off for idle */ stop_critical_timings(); - pctrl = hw_perf_disable_all(); + perf_flags = hw_perf_save_disable(); if (cstate->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cstate); @@ -287,7 +287,7 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } - hw_perf_restore_ctrl(pctrl); + hw_perf_restore(perf_flags); start_critical_timings(); } #endif /* !CONFIG_CPU_IDLE */ @@ -1433,7 +1433,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) /* Don't trace irqs off for idle */ stop_critical_timings(); - pctrl = hw_perf_disable_all(); + pctrl = hw_perf_save_disable(); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); @@ -1448,7 +1448,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } - hw_perf_restore_ctrl(pctrl); + hw_perf_restore(pctrl); start_critical_timings(); } -- cgit v1.2.3-18-g5258 From 37a25424252b6cff4dd4b1937ab6a1dbfcadabcc Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 16 Feb 2009 15:32:23 +0100 Subject: perfcounters: fix acpi_idle_do_entry() workaround Fix merge error in drivers/acpi/processor_idle.c. This resulted in non-working perfcounters on certain Nehalem systems. Signed-off-by: Ingo Molnar --- drivers/acpi/processor_idle.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 259f6e80631..08def2f20cd 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -826,12 +826,9 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) { u64 perf_flags; - u64 pctrl; - /* Don't trace irqs off for idle */ stop_critical_timings(); perf_flags = hw_perf_save_disable(); - pctrl = hw_perf_save_disable(); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); @@ -847,7 +844,6 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } hw_perf_restore(perf_flags); - hw_perf_restore(pctrl); start_critical_timings(); } -- cgit v1.2.3-18-g5258 From 1e6fcf840e11ceff8a656a678c6e4b0560a98e08 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 25 Mar 2009 17:46:42 +0000 Subject: xen: resume interrupts before system devices. Impact: bugfix Xen domain restore Otherwise the first timer interrupt after resume is missed and we never get another. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/manage.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 3ccd348d112..b703dd2c9f1 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -68,15 +68,15 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); - sysdev_resume(); - device_power_up(PMSG_RESUME); - if (!*cancelled) { xen_irq_resume(); xen_console_resume(); xen_timer_resume(); } + sysdev_resume(); + device_power_up(PMSG_RESUME); + return 0; } -- cgit v1.2.3-18-g5258 From d4c045364d3107603187f21a56ec231e74d26441 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 6 Feb 2009 19:20:31 -0800 Subject: xen: add irq_from_evtchn Given an evtchn, return the corresponding irq. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/events.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 30963af5dba..1cd2a0e15ae 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -151,6 +151,12 @@ static unsigned int evtchn_from_irq(unsigned irq) return info_for_irq(irq)->evtchn; } +unsigned irq_from_evtchn(unsigned int evtchn) +{ + return evtchn_to_irq[evtchn]; +} +EXPORT_SYMBOL_GPL(irq_from_evtchn); + static enum ipi_vector ipi_from_irq(unsigned irq) { struct irq_info *info = info_for_irq(irq); -- cgit v1.2.3-18-g5258 From f7116284c734f3a47180cd9c907944a1837ccb3c Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 6 Feb 2009 19:21:19 -0800 Subject: xen: add /dev/xen/evtchn driver This driver is used by application which wish to receive notifications from the hypervisor or other guests via Xen's event channel mechanism. In particular it is used by the xenstore daemon in domain 0. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/Kconfig | 10 ++ drivers/xen/Makefile | 3 +- drivers/xen/evtchn.c | 494 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 506 insertions(+), 1 deletion(-) create mode 100644 drivers/xen/evtchn.c (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 526187c8a12..1bbb9108f31 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -18,6 +18,16 @@ config XEN_SCRUB_PAGES secure, but slightly less efficient. If in doubt, say yes. +config XEN_DEV_EVTCHN + tristate "Xen /dev/xen/evtchn device" + depends on XEN + default y + help + The evtchn driver allows a userspace process to triger event + channels and to receive notification of an event channel + firing. + If in doubt, say yes. + config XENFS tristate "Xen filesystem" depends on XEN diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index ff8accc9e10..1567639847e 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -4,4 +4,5 @@ obj-y += xenbus/ obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o -obj-$(CONFIG_XENFS) += xenfs/ \ No newline at end of file +obj-$(CONFIG_XEN_DEV_EVTCHN) += evtchn.o +obj-$(CONFIG_XENFS) += xenfs/ diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c new file mode 100644 index 00000000000..517b9ee63e1 --- /dev/null +++ b/drivers/xen/evtchn.c @@ -0,0 +1,494 @@ +/****************************************************************************** + * evtchn.c + * + * Driver for receiving and demuxing event-channel signals. + * + * Copyright (c) 2004-2005, K A Fraser + * Multi-process extensions Copyright (c) 2004, Steven Smith + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct per_user_data { + /* Notification ring, accessed via /dev/xen/evtchn. */ +#define EVTCHN_RING_SIZE (PAGE_SIZE / sizeof(evtchn_port_t)) +#define EVTCHN_RING_MASK(_i) ((_i)&(EVTCHN_RING_SIZE-1)) + evtchn_port_t *ring; + unsigned int ring_cons, ring_prod, ring_overflow; + struct mutex ring_cons_mutex; /* protect against concurrent readers */ + + /* Processes wait on this queue when ring is empty. */ + wait_queue_head_t evtchn_wait; + struct fasync_struct *evtchn_async_queue; + const char *name; +}; + +/* Who's bound to each port? */ +static struct per_user_data *port_user[NR_EVENT_CHANNELS]; +static DEFINE_SPINLOCK(port_user_lock); + +irqreturn_t evtchn_interrupt(int irq, void *data) +{ + unsigned int port = (unsigned long)data; + struct per_user_data *u; + + spin_lock(&port_user_lock); + + u = port_user[port]; + + disable_irq_nosync(irq); + + if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) { + u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port; + wmb(); /* Ensure ring contents visible */ + if (u->ring_cons == u->ring_prod++) { + wake_up_interruptible(&u->evtchn_wait); + kill_fasync(&u->evtchn_async_queue, + SIGIO, POLL_IN); + } + } else { + u->ring_overflow = 1; + } + + spin_unlock(&port_user_lock); + + return IRQ_HANDLED; +} + +static ssize_t evtchn_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int rc; + unsigned int c, p, bytes1 = 0, bytes2 = 0; + struct per_user_data *u = file->private_data; + + /* Whole number of ports. */ + count &= ~(sizeof(evtchn_port_t)-1); + + if (count == 0) + return 0; + + if (count > PAGE_SIZE) + count = PAGE_SIZE; + + for (;;) { + mutex_lock(&u->ring_cons_mutex); + + rc = -EFBIG; + if (u->ring_overflow) + goto unlock_out; + + c = u->ring_cons; + p = u->ring_prod; + if (c != p) + break; + + mutex_unlock(&u->ring_cons_mutex); + + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + rc = wait_event_interruptible(u->evtchn_wait, + u->ring_cons != u->ring_prod); + if (rc) + return rc; + } + + /* Byte lengths of two chunks. Chunk split (if any) is at ring wrap. */ + if (((c ^ p) & EVTCHN_RING_SIZE) != 0) { + bytes1 = (EVTCHN_RING_SIZE - EVTCHN_RING_MASK(c)) * + sizeof(evtchn_port_t); + bytes2 = EVTCHN_RING_MASK(p) * sizeof(evtchn_port_t); + } else { + bytes1 = (p - c) * sizeof(evtchn_port_t); + bytes2 = 0; + } + + /* Truncate chunks according to caller's maximum byte count. */ + if (bytes1 > count) { + bytes1 = count; + bytes2 = 0; + } else if ((bytes1 + bytes2) > count) { + bytes2 = count - bytes1; + } + + rc = -EFAULT; + rmb(); /* Ensure that we see the port before we copy it. */ + if (copy_to_user(buf, &u->ring[EVTCHN_RING_MASK(c)], bytes1) || + ((bytes2 != 0) && + copy_to_user(&buf[bytes1], &u->ring[0], bytes2))) + goto unlock_out; + + u->ring_cons += (bytes1 + bytes2) / sizeof(evtchn_port_t); + rc = bytes1 + bytes2; + + unlock_out: + mutex_unlock(&u->ring_cons_mutex); + return rc; +} + +static ssize_t evtchn_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + int rc, i; + evtchn_port_t *kbuf = (evtchn_port_t *)__get_free_page(GFP_KERNEL); + struct per_user_data *u = file->private_data; + + if (kbuf == NULL) + return -ENOMEM; + + /* Whole number of ports. */ + count &= ~(sizeof(evtchn_port_t)-1); + + rc = 0; + if (count == 0) + goto out; + + if (count > PAGE_SIZE) + count = PAGE_SIZE; + + rc = -EFAULT; + if (copy_from_user(kbuf, buf, count) != 0) + goto out; + + spin_lock_irq(&port_user_lock); + for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) + if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u)) + enable_irq(irq_from_evtchn(kbuf[i])); + spin_unlock_irq(&port_user_lock); + + rc = count; + + out: + free_page((unsigned long)kbuf); + return rc; +} + +static int evtchn_bind_to_user(struct per_user_data *u, int port) +{ + int irq; + int rc = 0; + + spin_lock_irq(&port_user_lock); + + BUG_ON(port_user[port] != NULL); + + irq = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED, + u->name, (void *)(unsigned long)port); + if (rc < 0) + goto fail; + + port_user[port] = u; + +fail: + spin_unlock_irq(&port_user_lock); + return rc; +} + +static void evtchn_unbind_from_user(struct per_user_data *u, int port) +{ + int irq = irq_from_evtchn(port); + + unbind_from_irqhandler(irq, (void *)(unsigned long)port); + port_user[port] = NULL; +} + +static long evtchn_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int rc; + struct per_user_data *u = file->private_data; + void __user *uarg = (void __user *) arg; + + switch (cmd) { + case IOCTL_EVTCHN_BIND_VIRQ: { + struct ioctl_evtchn_bind_virq bind; + struct evtchn_bind_virq bind_virq; + + rc = -EFAULT; + if (copy_from_user(&bind, uarg, sizeof(bind))) + break; + + bind_virq.virq = bind.virq; + bind_virq.vcpu = 0; + rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq, + &bind_virq); + if (rc != 0) + break; + + rc = evtchn_bind_to_user(u, bind_virq.port); + if (rc == 0) + rc = bind_virq.port; + break; + } + + case IOCTL_EVTCHN_BIND_INTERDOMAIN: { + struct ioctl_evtchn_bind_interdomain bind; + struct evtchn_bind_interdomain bind_interdomain; + + rc = -EFAULT; + if (copy_from_user(&bind, uarg, sizeof(bind))) + break; + + bind_interdomain.remote_dom = bind.remote_domain; + bind_interdomain.remote_port = bind.remote_port; + rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_interdomain, + &bind_interdomain); + if (rc != 0) + break; + + rc = evtchn_bind_to_user(u, bind_interdomain.local_port); + if (rc == 0) + rc = bind_interdomain.local_port; + break; + } + + case IOCTL_EVTCHN_BIND_UNBOUND_PORT: { + struct ioctl_evtchn_bind_unbound_port bind; + struct evtchn_alloc_unbound alloc_unbound; + + rc = -EFAULT; + if (copy_from_user(&bind, uarg, sizeof(bind))) + break; + + alloc_unbound.dom = DOMID_SELF; + alloc_unbound.remote_dom = bind.remote_domain; + rc = HYPERVISOR_event_channel_op(EVTCHNOP_alloc_unbound, + &alloc_unbound); + if (rc != 0) + break; + + rc = evtchn_bind_to_user(u, alloc_unbound.port); + if (rc == 0) + rc = alloc_unbound.port; + break; + } + + case IOCTL_EVTCHN_UNBIND: { + struct ioctl_evtchn_unbind unbind; + + rc = -EFAULT; + if (copy_from_user(&unbind, uarg, sizeof(unbind))) + break; + + rc = -EINVAL; + if (unbind.port >= NR_EVENT_CHANNELS) + break; + + spin_lock_irq(&port_user_lock); + + rc = -ENOTCONN; + if (port_user[unbind.port] != u) { + spin_unlock_irq(&port_user_lock); + break; + } + + evtchn_unbind_from_user(u, unbind.port); + + spin_unlock_irq(&port_user_lock); + + rc = 0; + break; + } + + case IOCTL_EVTCHN_NOTIFY: { + struct ioctl_evtchn_notify notify; + + rc = -EFAULT; + if (copy_from_user(¬ify, uarg, sizeof(notify))) + break; + + if (notify.port >= NR_EVENT_CHANNELS) { + rc = -EINVAL; + } else if (port_user[notify.port] != u) { + rc = -ENOTCONN; + } else { + notify_remote_via_evtchn(notify.port); + rc = 0; + } + break; + } + + case IOCTL_EVTCHN_RESET: { + /* Initialise the ring to empty. Clear errors. */ + mutex_lock(&u->ring_cons_mutex); + spin_lock_irq(&port_user_lock); + u->ring_cons = u->ring_prod = u->ring_overflow = 0; + spin_unlock_irq(&port_user_lock); + mutex_unlock(&u->ring_cons_mutex); + rc = 0; + break; + } + + default: + rc = -ENOSYS; + break; + } + + return rc; +} + +static unsigned int evtchn_poll(struct file *file, poll_table *wait) +{ + unsigned int mask = POLLOUT | POLLWRNORM; + struct per_user_data *u = file->private_data; + + poll_wait(file, &u->evtchn_wait, wait); + if (u->ring_cons != u->ring_prod) + mask |= POLLIN | POLLRDNORM; + if (u->ring_overflow) + mask = POLLERR; + return mask; +} + +static int evtchn_fasync(int fd, struct file *filp, int on) +{ + struct per_user_data *u = filp->private_data; + return fasync_helper(fd, filp, on, &u->evtchn_async_queue); +} + +static int evtchn_open(struct inode *inode, struct file *filp) +{ + struct per_user_data *u; + + u = kzalloc(sizeof(*u), GFP_KERNEL); + if (u == NULL) + return -ENOMEM; + + u->name = kasprintf(GFP_KERNEL, "evtchn:%s", current->comm); + if (u->name == NULL) { + kfree(u); + return -ENOMEM; + } + + init_waitqueue_head(&u->evtchn_wait); + + u->ring = (evtchn_port_t *)__get_free_page(GFP_KERNEL); + if (u->ring == NULL) { + kfree(u->name); + kfree(u); + return -ENOMEM; + } + + mutex_init(&u->ring_cons_mutex); + + filp->private_data = u; + + return 0; +} + +static int evtchn_release(struct inode *inode, struct file *filp) +{ + int i; + struct per_user_data *u = filp->private_data; + + spin_lock_irq(&port_user_lock); + + free_page((unsigned long)u->ring); + + for (i = 0; i < NR_EVENT_CHANNELS; i++) { + if (port_user[i] != u) + continue; + + evtchn_unbind_from_user(port_user[i], i); + } + + spin_unlock_irq(&port_user_lock); + + kfree(u->name); + kfree(u); + + return 0; +} + +static const struct file_operations evtchn_fops = { + .owner = THIS_MODULE, + .read = evtchn_read, + .write = evtchn_write, + .unlocked_ioctl = evtchn_ioctl, + .poll = evtchn_poll, + .fasync = evtchn_fasync, + .open = evtchn_open, + .release = evtchn_release, +}; + +static struct miscdevice evtchn_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "evtchn", + .fops = &evtchn_fops, +}; +static int __init evtchn_init(void) +{ + int err; + + if (!xen_domain()) + return -ENODEV; + + spin_lock_init(&port_user_lock); + memset(port_user, 0, sizeof(port_user)); + + /* Create '/dev/misc/evtchn'. */ + err = misc_register(&evtchn_miscdev); + if (err != 0) { + printk(KERN_ALERT "Could not register /dev/misc/evtchn\n"); + return err; + } + + printk(KERN_INFO "Event-channel device installed.\n"); + + return 0; +} + +static void __exit evtchn_cleanup(void) +{ + misc_deregister(&evtchn_miscdev); +} + +module_init(evtchn_init); +module_exit(evtchn_cleanup); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-18-g5258 From 0a4666b539a0e896ec4e8396a034a479e3573125 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Feb 2009 13:03:24 -0800 Subject: xen/dev-evtchn: clean up locking in evtchn Define a new per_user_data mutex to serialize bind/unbind operations to prevent them from racing with each other. Fix error returns and don't do a bind while holding a spinlock. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/evtchn.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c index 517b9ee63e1..af031950f9b 100644 --- a/drivers/xen/evtchn.c +++ b/drivers/xen/evtchn.c @@ -54,6 +54,8 @@ #include struct per_user_data { + struct mutex bind_mutex; /* serialize bind/unbind operations */ + /* Notification ring, accessed via /dev/xen/evtchn. */ #define EVTCHN_RING_SIZE (PAGE_SIZE / sizeof(evtchn_port_t)) #define EVTCHN_RING_MASK(_i) ((_i)&(EVTCHN_RING_SIZE-1)) @@ -69,7 +71,7 @@ struct per_user_data { /* Who's bound to each port? */ static struct per_user_data *port_user[NR_EVENT_CHANNELS]; -static DEFINE_SPINLOCK(port_user_lock); +static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */ irqreturn_t evtchn_interrupt(int irq, void *data) { @@ -210,22 +212,24 @@ static ssize_t evtchn_write(struct file *file, const char __user *buf, static int evtchn_bind_to_user(struct per_user_data *u, int port) { - int irq; int rc = 0; - spin_lock_irq(&port_user_lock); - + /* + * Ports are never reused, so every caller should pass in a + * unique port. + * + * (Locking not necessary because we haven't registered the + * interrupt handler yet, and our caller has already + * serialized bind operations.) + */ BUG_ON(port_user[port] != NULL); - - irq = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED, - u->name, (void *)(unsigned long)port); - if (rc < 0) - goto fail; - port_user[port] = u; -fail: - spin_unlock_irq(&port_user_lock); + rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED, + u->name, (void *)(unsigned long)port); + if (rc >= 0) + rc = 0; + return rc; } @@ -234,6 +238,10 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port) int irq = irq_from_evtchn(port); unbind_from_irqhandler(irq, (void *)(unsigned long)port); + + /* make sure we unbind the irq handler before clearing the port */ + barrier(); + port_user[port] = NULL; } @@ -244,6 +252,9 @@ static long evtchn_ioctl(struct file *file, struct per_user_data *u = file->private_data; void __user *uarg = (void __user *) arg; + /* Prevent bind from racing with unbind */ + mutex_lock(&u->bind_mutex); + switch (cmd) { case IOCTL_EVTCHN_BIND_VIRQ: { struct ioctl_evtchn_bind_virq bind; @@ -368,6 +379,7 @@ static long evtchn_ioctl(struct file *file, rc = -ENOSYS; break; } + mutex_unlock(&u->bind_mutex); return rc; } @@ -414,6 +426,7 @@ static int evtchn_open(struct inode *inode, struct file *filp) return -ENOMEM; } + mutex_init(&u->bind_mutex); mutex_init(&u->ring_cons_mutex); filp->private_data = u; -- cgit v1.2.3-18-g5258 From a1ce1be578365a4da7e7d7db4812539d2d5da763 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 9 Feb 2009 12:05:50 -0800 Subject: xen: remove suspend_cancel hook Remove suspend_cancel hook from xenbus_driver, in preparation for using the device model for suspending. Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenbus/xenbus_probe.c | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 773d1cf2328..bd20361fb09 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -689,27 +689,6 @@ static int suspend_dev(struct device *dev, void *data) return 0; } -static int suspend_cancel_dev(struct device *dev, void *data) -{ - int err = 0; - struct xenbus_driver *drv; - struct xenbus_device *xdev; - - DPRINTK(""); - - if (dev->driver == NULL) - return 0; - drv = to_xenbus_driver(dev->driver); - xdev = container_of(dev, struct xenbus_device, dev); - if (drv->suspend_cancel) - err = drv->suspend_cancel(xdev); - if (err) - printk(KERN_WARNING - "xenbus: suspend_cancel %s failed: %i\n", - dev_name(dev), err); - return 0; -} - static int resume_dev(struct device *dev, void *data) { int err; @@ -777,8 +756,6 @@ EXPORT_SYMBOL_GPL(xenbus_resume); void xenbus_suspend_cancel(void) { xs_suspend_cancel(); - bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_cancel_dev); - xenbus_backend_resume(suspend_cancel_dev); } EXPORT_SYMBOL_GPL(xenbus_suspend_cancel); -- cgit v1.2.3-18-g5258 From de5b31bd47de7e6f41be2e271318dbc8f1af354d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 9 Feb 2009 12:05:50 -0800 Subject: xen: use device model for suspending xenbus devices Signed-off-by: Ian Campbell Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/manage.c | 9 ++++----- drivers/xen/xenbus/xenbus_probe.c | 37 +++++++++---------------------------- drivers/xen/xenbus/xenbus_xs.c | 2 ++ 3 files changed, 15 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index b703dd2c9f1..5269bb4d249 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -104,9 +104,8 @@ static void do_suspend(void) goto out; } - printk("suspending xenbus...\n"); - /* XXX use normal device tree? */ - xenbus_suspend(); + printk(KERN_DEBUG "suspending xenstore...\n"); + xs_suspend(); err = stop_machine(xen_suspend, &cancelled, cpumask_of(0)); if (err) { @@ -116,9 +115,9 @@ static void do_suspend(void) if (!cancelled) { xen_arch_resume(); - xenbus_resume(); + xs_resume(); } else - xenbus_suspend_cancel(); + xs_suspend_cancel(); device_resume(PMSG_RESUME); diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index bd20361fb09..4649213bed9 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -71,6 +71,9 @@ static int xenbus_probe_frontend(const char *type, const char *name); static void xenbus_dev_shutdown(struct device *_dev); +static int xenbus_dev_suspend(struct device *dev, pm_message_t state); +static int xenbus_dev_resume(struct device *dev); + /* If something in array of ids matches this device, return it. */ static const struct xenbus_device_id * match_device(const struct xenbus_device_id *arr, struct xenbus_device *dev) @@ -188,6 +191,9 @@ static struct xen_bus_type xenbus_frontend = { .remove = xenbus_dev_remove, .shutdown = xenbus_dev_shutdown, .dev_attrs = xenbus_dev_attrs, + + .suspend = xenbus_dev_suspend, + .resume = xenbus_dev_resume, }, }; @@ -669,7 +675,7 @@ static struct xenbus_watch fe_watch = { .callback = frontend_changed, }; -static int suspend_dev(struct device *dev, void *data) +static int xenbus_dev_suspend(struct device *dev, pm_message_t state) { int err = 0; struct xenbus_driver *drv; @@ -682,14 +688,14 @@ static int suspend_dev(struct device *dev, void *data) drv = to_xenbus_driver(dev->driver); xdev = container_of(dev, struct xenbus_device, dev); if (drv->suspend) - err = drv->suspend(xdev); + err = drv->suspend(xdev, state); if (err) printk(KERN_WARNING "xenbus: suspend %s failed: %i\n", dev_name(dev), err); return 0; } -static int resume_dev(struct device *dev, void *data) +static int xenbus_dev_resume(struct device *dev) { int err; struct xenbus_driver *drv; @@ -734,31 +740,6 @@ static int resume_dev(struct device *dev, void *data) return 0; } -void xenbus_suspend(void) -{ - DPRINTK(""); - - bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, suspend_dev); - xenbus_backend_suspend(suspend_dev); - xs_suspend(); -} -EXPORT_SYMBOL_GPL(xenbus_suspend); - -void xenbus_resume(void) -{ - xb_init_comms(); - xs_resume(); - bus_for_each_dev(&xenbus_frontend.bus, NULL, NULL, resume_dev); - xenbus_backend_resume(resume_dev); -} -EXPORT_SYMBOL_GPL(xenbus_resume); - -void xenbus_suspend_cancel(void) -{ - xs_suspend_cancel(); -} -EXPORT_SYMBOL_GPL(xenbus_suspend_cancel); - /* A flag to determine if xenstored is 'ready' (i.e. has started) */ int xenstored_ready = 0; diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index e325eab4724..eab33f1dbdf 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -673,6 +673,8 @@ void xs_resume(void) struct xenbus_watch *watch; char token[sizeof(watch) * 2 + 1]; + xb_init_comms(); + mutex_unlock(&xs_state.response_mutex); mutex_unlock(&xs_state.request_mutex); up_write(&xs_state.transaction_mutex); -- cgit v1.2.3-18-g5258 From c6a960ce8858f20036cc3afc3b9422670d0d9021 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 9 Feb 2009 12:05:53 -0800 Subject: xen/xenbus: export xenbus_dev_changed Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenbus/xenbus_probe.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 4649213bed9..d42e25d5968 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -660,6 +660,7 @@ void xenbus_dev_changed(const char *node, struct xen_bus_type *bus) kfree(root); } +EXPORT_SYMBOL_GPL(xenbus_dev_changed); static void frontend_changed(struct xenbus_watch *watch, const char **vec, unsigned int len) -- cgit v1.2.3-18-g5258 From cff7e81b3dd7c25cd2248cd7a04c5764552d5d55 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 10 Mar 2009 14:39:59 -0700 Subject: xen: add /sys/hypervisor support Adds support for Xen info under /sys/hypervisor. Taken from Novell 2.6.27 backport tree. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/Kconfig | 10 + drivers/xen/Makefile | 3 +- drivers/xen/sys-hypervisor.c | 475 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 487 insertions(+), 1 deletion(-) create mode 100644 drivers/xen/sys-hypervisor.c (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 526187c8a12..88bca1c42db 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -41,3 +41,13 @@ config XEN_COMPAT_XENFS a xen platform. If in doubt, say yes. +config XEN_SYS_HYPERVISOR + bool "Create xen entries under /sys/hypervisor" + depends on XEN && SYSFS + select SYS_HYPERVISOR + default y + help + Create entries under /sys/hypervisor describing the Xen + hypervisor environment. When running native or in another + virtual environment, /sys/hypervisor will still be present, + but will have no xen contents. \ No newline at end of file diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index ff8accc9e10..f3603a39db5 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -4,4 +4,5 @@ obj-y += xenbus/ obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o -obj-$(CONFIG_XENFS) += xenfs/ \ No newline at end of file +obj-$(CONFIG_XENFS) += xenfs/ +obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c new file mode 100644 index 00000000000..cb29d1ccf0d --- /dev/null +++ b/drivers/xen/sys-hypervisor.c @@ -0,0 +1,475 @@ +/* + * copyright (c) 2006 IBM Corporation + * Authored by: Mike D. Day + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#define HYPERVISOR_ATTR_RO(_name) \ +static struct hyp_sysfs_attr _name##_attr = __ATTR_RO(_name) + +#define HYPERVISOR_ATTR_RW(_name) \ +static struct hyp_sysfs_attr _name##_attr = \ + __ATTR(_name, 0644, _name##_show, _name##_store) + +struct hyp_sysfs_attr { + struct attribute attr; + ssize_t (*show)(struct hyp_sysfs_attr *, char *); + ssize_t (*store)(struct hyp_sysfs_attr *, const char *, size_t); + void *hyp_attr_data; +}; + +static ssize_t type_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + return sprintf(buffer, "xen\n"); +} + +HYPERVISOR_ATTR_RO(type); + +static int __init xen_sysfs_type_init(void) +{ + return sysfs_create_file(hypervisor_kobj, &type_attr.attr); +} + +static void xen_sysfs_type_destroy(void) +{ + sysfs_remove_file(hypervisor_kobj, &type_attr.attr); +} + +/* xen version attributes */ +static ssize_t major_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int version = HYPERVISOR_xen_version(XENVER_version, NULL); + if (version) + return sprintf(buffer, "%d\n", version >> 16); + return -ENODEV; +} + +HYPERVISOR_ATTR_RO(major); + +static ssize_t minor_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int version = HYPERVISOR_xen_version(XENVER_version, NULL); + if (version) + return sprintf(buffer, "%d\n", version & 0xff); + return -ENODEV; +} + +HYPERVISOR_ATTR_RO(minor); + +static ssize_t extra_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + char *extra; + + extra = kmalloc(XEN_EXTRAVERSION_LEN, GFP_KERNEL); + if (extra) { + ret = HYPERVISOR_xen_version(XENVER_extraversion, extra); + if (!ret) + ret = sprintf(buffer, "%s\n", extra); + kfree(extra); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(extra); + +static struct attribute *version_attrs[] = { + &major_attr.attr, + &minor_attr.attr, + &extra_attr.attr, + NULL +}; + +static struct attribute_group version_group = { + .name = "version", + .attrs = version_attrs, +}; + +static int __init xen_sysfs_version_init(void) +{ + return sysfs_create_group(hypervisor_kobj, &version_group); +} + +static void xen_sysfs_version_destroy(void) +{ + sysfs_remove_group(hypervisor_kobj, &version_group); +} + +/* UUID */ + +static ssize_t uuid_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + char *vm, *val; + int ret; + extern int xenstored_ready; + + if (!xenstored_ready) + return -EBUSY; + + vm = xenbus_read(XBT_NIL, "vm", "", NULL); + if (IS_ERR(vm)) + return PTR_ERR(vm); + val = xenbus_read(XBT_NIL, vm, "uuid", NULL); + kfree(vm); + if (IS_ERR(val)) + return PTR_ERR(val); + ret = sprintf(buffer, "%s\n", val); + kfree(val); + return ret; +} + +HYPERVISOR_ATTR_RO(uuid); + +static int __init xen_sysfs_uuid_init(void) +{ + return sysfs_create_file(hypervisor_kobj, &uuid_attr.attr); +} + +static void xen_sysfs_uuid_destroy(void) +{ + sysfs_remove_file(hypervisor_kobj, &uuid_attr.attr); +} + +/* xen compilation attributes */ + +static ssize_t compiler_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + struct xen_compile_info *info; + + info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL); + if (info) { + ret = HYPERVISOR_xen_version(XENVER_compile_info, info); + if (!ret) + ret = sprintf(buffer, "%s\n", info->compiler); + kfree(info); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(compiler); + +static ssize_t compiled_by_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + struct xen_compile_info *info; + + info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL); + if (info) { + ret = HYPERVISOR_xen_version(XENVER_compile_info, info); + if (!ret) + ret = sprintf(buffer, "%s\n", info->compile_by); + kfree(info); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(compiled_by); + +static ssize_t compile_date_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + struct xen_compile_info *info; + + info = kmalloc(sizeof(struct xen_compile_info), GFP_KERNEL); + if (info) { + ret = HYPERVISOR_xen_version(XENVER_compile_info, info); + if (!ret) + ret = sprintf(buffer, "%s\n", info->compile_date); + kfree(info); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(compile_date); + +static struct attribute *xen_compile_attrs[] = { + &compiler_attr.attr, + &compiled_by_attr.attr, + &compile_date_attr.attr, + NULL +}; + +static struct attribute_group xen_compilation_group = { + .name = "compilation", + .attrs = xen_compile_attrs, +}; + +int __init static xen_compilation_init(void) +{ + return sysfs_create_group(hypervisor_kobj, &xen_compilation_group); +} + +static void xen_compilation_destroy(void) +{ + sysfs_remove_group(hypervisor_kobj, &xen_compilation_group); +} + +/* xen properties info */ + +static ssize_t capabilities_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + char *caps; + + caps = kmalloc(XEN_CAPABILITIES_INFO_LEN, GFP_KERNEL); + if (caps) { + ret = HYPERVISOR_xen_version(XENVER_capabilities, caps); + if (!ret) + ret = sprintf(buffer, "%s\n", caps); + kfree(caps); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(capabilities); + +static ssize_t changeset_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + char *cset; + + cset = kmalloc(XEN_CHANGESET_INFO_LEN, GFP_KERNEL); + if (cset) { + ret = HYPERVISOR_xen_version(XENVER_changeset, cset); + if (!ret) + ret = sprintf(buffer, "%s\n", cset); + kfree(cset); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(changeset); + +static ssize_t virtual_start_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret = -ENOMEM; + struct xen_platform_parameters *parms; + + parms = kmalloc(sizeof(struct xen_platform_parameters), GFP_KERNEL); + if (parms) { + ret = HYPERVISOR_xen_version(XENVER_platform_parameters, + parms); + if (!ret) + ret = sprintf(buffer, "%lx\n", parms->virt_start); + kfree(parms); + } + + return ret; +} + +HYPERVISOR_ATTR_RO(virtual_start); + +static ssize_t pagesize_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + int ret; + + ret = HYPERVISOR_xen_version(XENVER_pagesize, NULL); + if (ret > 0) + ret = sprintf(buffer, "%x\n", ret); + + return ret; +} + +HYPERVISOR_ATTR_RO(pagesize); + +/* eventually there will be several more features to export */ +static ssize_t xen_feature_show(int index, char *buffer) +{ + int ret = -ENOMEM; + struct xen_feature_info *info; + + info = kmalloc(sizeof(struct xen_feature_info), GFP_KERNEL); + if (info) { + info->submap_idx = index; + ret = HYPERVISOR_xen_version(XENVER_get_features, info); + if (!ret) + ret = sprintf(buffer, "%d\n", info->submap); + kfree(info); + } + + return ret; +} + +static ssize_t writable_pt_show(struct hyp_sysfs_attr *attr, char *buffer) +{ + return xen_feature_show(XENFEAT_writable_page_tables, buffer); +} + +HYPERVISOR_ATTR_RO(writable_pt); + +static struct attribute *xen_properties_attrs[] = { + &capabilities_attr.attr, + &changeset_attr.attr, + &virtual_start_attr.attr, + &pagesize_attr.attr, + &writable_pt_attr.attr, + NULL +}; + +static struct attribute_group xen_properties_group = { + .name = "properties", + .attrs = xen_properties_attrs, +}; + +static int __init xen_properties_init(void) +{ + return sysfs_create_group(hypervisor_kobj, &xen_properties_group); +} + +static void xen_properties_destroy(void) +{ + sysfs_remove_group(hypervisor_kobj, &xen_properties_group); +} + +#ifdef CONFIG_KEXEC + +extern size_t vmcoreinfo_size_xen; +extern unsigned long paddr_vmcoreinfo_xen; + +static ssize_t vmcoreinfo_show(struct hyp_sysfs_attr *attr, char *page) +{ + return sprintf(page, "%lx %zx\n", + paddr_vmcoreinfo_xen, vmcoreinfo_size_xen); +} + +HYPERVISOR_ATTR_RO(vmcoreinfo); + +static int __init xen_sysfs_vmcoreinfo_init(void) +{ + return sysfs_create_file(hypervisor_kobj, + &vmcoreinfo_attr.attr); +} + +static void xen_sysfs_vmcoreinfo_destroy(void) +{ + sysfs_remove_file(hypervisor_kobj, &vmcoreinfo_attr.attr); +} + +#endif + +static int __init hyper_sysfs_init(void) +{ + int ret; + + if (!xen_domain()) + return -ENODEV; + + ret = xen_sysfs_type_init(); + if (ret) + goto out; + ret = xen_sysfs_version_init(); + if (ret) + goto version_out; + ret = xen_compilation_init(); + if (ret) + goto comp_out; + ret = xen_sysfs_uuid_init(); + if (ret) + goto uuid_out; + ret = xen_properties_init(); + if (ret) + goto prop_out; +#ifdef CONFIG_KEXEC + if (vmcoreinfo_size_xen != 0) { + ret = xen_sysfs_vmcoreinfo_init(); + if (ret) + goto vmcoreinfo_out; + } +#endif + + goto out; + +#ifdef CONFIG_KEXEC +vmcoreinfo_out: +#endif + xen_properties_destroy(); +prop_out: + xen_sysfs_uuid_destroy(); +uuid_out: + xen_compilation_destroy(); +comp_out: + xen_sysfs_version_destroy(); +version_out: + xen_sysfs_type_destroy(); +out: + return ret; +} + +static void __exit hyper_sysfs_exit(void) +{ +#ifdef CONFIG_KEXEC + if (vmcoreinfo_size_xen != 0) + xen_sysfs_vmcoreinfo_destroy(); +#endif + xen_properties_destroy(); + xen_compilation_destroy(); + xen_sysfs_uuid_destroy(); + xen_sysfs_version_destroy(); + xen_sysfs_type_destroy(); + +} +module_init(hyper_sysfs_init); +module_exit(hyper_sysfs_exit); + +static ssize_t hyp_sysfs_show(struct kobject *kobj, + struct attribute *attr, + char *buffer) +{ + struct hyp_sysfs_attr *hyp_attr; + hyp_attr = container_of(attr, struct hyp_sysfs_attr, attr); + if (hyp_attr->show) + return hyp_attr->show(hyp_attr, buffer); + return 0; +} + +static ssize_t hyp_sysfs_store(struct kobject *kobj, + struct attribute *attr, + const char *buffer, + size_t len) +{ + struct hyp_sysfs_attr *hyp_attr; + hyp_attr = container_of(attr, struct hyp_sysfs_attr, attr); + if (hyp_attr->store) + return hyp_attr->store(hyp_attr, buffer, len); + return 0; +} + +static struct sysfs_ops hyp_sysfs_ops = { + .show = hyp_sysfs_show, + .store = hyp_sysfs_store, +}; + +static struct kobj_type hyp_sysfs_kobj_type = { + .sysfs_ops = &hyp_sysfs_ops, +}; + +static int __init hypervisor_subsys_init(void) +{ + if (!xen_domain()) + return -ENODEV; + + hypervisor_kobj->ktype = &hyp_sysfs_kobj_type; + return 0; +} +device_initcall(hypervisor_subsys_init); -- cgit v1.2.3-18-g5258 From a649b720614d5675dc402bef75a92576143fede7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 10 Mar 2009 17:17:41 -0700 Subject: xen/sys/hypervisor: change writable_pt to features /sys/hypervisor/properties/writable_pt was misnamed. Rename to features, expressed as a bit array in hex. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/sys-hypervisor.c | 41 ++++++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index cb29d1ccf0d..1267d6fcc0c 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -293,37 +293,48 @@ static ssize_t pagesize_show(struct hyp_sysfs_attr *attr, char *buffer) HYPERVISOR_ATTR_RO(pagesize); -/* eventually there will be several more features to export */ static ssize_t xen_feature_show(int index, char *buffer) { - int ret = -ENOMEM; - struct xen_feature_info *info; + ssize_t ret; + struct xen_feature_info info; - info = kmalloc(sizeof(struct xen_feature_info), GFP_KERNEL); - if (info) { - info->submap_idx = index; - ret = HYPERVISOR_xen_version(XENVER_get_features, info); - if (!ret) - ret = sprintf(buffer, "%d\n", info->submap); - kfree(info); - } + info.submap_idx = index; + ret = HYPERVISOR_xen_version(XENVER_get_features, &info); + if (!ret) + ret = sprintf(buffer, "%08x", info.submap); return ret; } -static ssize_t writable_pt_show(struct hyp_sysfs_attr *attr, char *buffer) +static ssize_t features_show(struct hyp_sysfs_attr *attr, char *buffer) { - return xen_feature_show(XENFEAT_writable_page_tables, buffer); + ssize_t len; + int i; + + len = 0; + for (i = XENFEAT_NR_SUBMAPS-1; i >= 0; i--) { + int ret = xen_feature_show(i, buffer + len); + if (ret < 0) { + if (len == 0) + len = ret; + break; + } + len += ret; + } + if (len > 0) + buffer[len++] = '\n'; + + return len; } -HYPERVISOR_ATTR_RO(writable_pt); +HYPERVISOR_ATTR_RO(features); static struct attribute *xen_properties_attrs[] = { &capabilities_attr.attr, &changeset_attr.attr, &virtual_start_attr.attr, &pagesize_attr.attr, - &writable_pt_attr.attr, + &features_attr.attr, NULL }; -- cgit v1.2.3-18-g5258 From f0783708bf63a2827863cf2be57c08a24843e6bd Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 11 Mar 2009 10:19:54 +0000 Subject: xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet I needed this to compile since there is no kexec yet in pvops kernel CC drivers/xen/sys-hypervisor.o drivers/xen/sys-hypervisor.c: In function 'hyper_sysfs_init': drivers/xen/sys-hypervisor.c:405: error: 'vmcoreinfo_size_xen' undeclared (first use in this function) drivers/xen/sys-hypervisor.c:405: error: (Each undeclared identifier is reported only once drivers/xen/sys-hypervisor.c:405: error: for each function it appears in.) drivers/xen/sys-hypervisor.c:406: error: implicit declaration of function 'xen_sysfs_vmcoreinfo_init' drivers/xen/sys-hypervisor.c: In function 'hyper_sysfs_exit': drivers/xen/sys-hypervisor.c:433: error: 'vmcoreinfo_size_xen' undeclared (first use in this function) drivers/xen/sys-hypervisor.c:434: error: implicit declaration of function 'xen_sysfs_vmcoreinfo_destroy' Signed-off-by: Ian Campbell --- drivers/xen/sys-hypervisor.c | 41 ----------------------------------------- 1 file changed, 41 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index 1267d6fcc0c..88a60e03ccf 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -353,32 +353,6 @@ static void xen_properties_destroy(void) sysfs_remove_group(hypervisor_kobj, &xen_properties_group); } -#ifdef CONFIG_KEXEC - -extern size_t vmcoreinfo_size_xen; -extern unsigned long paddr_vmcoreinfo_xen; - -static ssize_t vmcoreinfo_show(struct hyp_sysfs_attr *attr, char *page) -{ - return sprintf(page, "%lx %zx\n", - paddr_vmcoreinfo_xen, vmcoreinfo_size_xen); -} - -HYPERVISOR_ATTR_RO(vmcoreinfo); - -static int __init xen_sysfs_vmcoreinfo_init(void) -{ - return sysfs_create_file(hypervisor_kobj, - &vmcoreinfo_attr.attr); -} - -static void xen_sysfs_vmcoreinfo_destroy(void) -{ - sysfs_remove_file(hypervisor_kobj, &vmcoreinfo_attr.attr); -} - -#endif - static int __init hyper_sysfs_init(void) { int ret; @@ -401,20 +375,9 @@ static int __init hyper_sysfs_init(void) ret = xen_properties_init(); if (ret) goto prop_out; -#ifdef CONFIG_KEXEC - if (vmcoreinfo_size_xen != 0) { - ret = xen_sysfs_vmcoreinfo_init(); - if (ret) - goto vmcoreinfo_out; - } -#endif goto out; -#ifdef CONFIG_KEXEC -vmcoreinfo_out: -#endif - xen_properties_destroy(); prop_out: xen_sysfs_uuid_destroy(); uuid_out: @@ -429,10 +392,6 @@ out: static void __exit hyper_sysfs_exit(void) { -#ifdef CONFIG_KEXEC - if (vmcoreinfo_size_xen != 0) - xen_sysfs_vmcoreinfo_destroy(); -#endif xen_properties_destroy(); xen_compilation_destroy(); xen_sysfs_uuid_destroy(); -- cgit v1.2.3-18-g5258 From 818fd20673df82031e604bb784d836f1fc2e2451 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 6 Feb 2009 18:46:47 -0800 Subject: xen: add "capabilities" file The xenfs capabilities file allows usermode to determine what capabilities the domain has. The only one at present is "control_d" in a privileged domain. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/super.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c index 515741a8e6b..6559e0c752c 100644 --- a/drivers/xen/xenfs/super.c +++ b/drivers/xen/xenfs/super.c @@ -20,10 +20,27 @@ MODULE_DESCRIPTION("Xen filesystem"); MODULE_LICENSE("GPL"); +static ssize_t capabilities_read(struct file *file, char __user *buf, + size_t size, loff_t *off) +{ + char *tmp = ""; + + if (xen_initial_domain()) + tmp = "control_d\n"; + + return simple_read_from_buffer(buf, size, off, tmp, strlen(tmp)); +} + +static const struct file_operations capabilities_file_ops = { + .read = capabilities_read, +}; + static int xenfs_fill_super(struct super_block *sb, void *data, int silent) { static struct tree_descr xenfs_files[] = { - [2] = {"xenbus", &xenbus_file_ops, S_IRUSR|S_IWUSR}, + [1] = {}, + { "xenbus", &xenbus_file_ops, S_IRUSR|S_IWUSR }, + { "capabilities", &capabilities_file_ops, S_IRUGO }, {""}, }; -- cgit v1.2.3-18-g5258 From 53152f957d4a5dfd537d17c823afeb1a2c03753e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 2 Apr 2009 13:24:28 +0100 Subject: xen: honour VCPU availability on boot If a VM is booted with offline VCPUs then unplug them during boot. Determining the availability of a VCPU requires access to XenStore which is not available at the point smp_prepare_cpus() is called, therefore we bring up all VCPUS initially and unplug the offline ones as soon as XenStore becomes available. Signed-off-by: Ian Campbell --- drivers/xen/cpu_hotplug.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c index 974f56d1ebe..411cb1fc927 100644 --- a/drivers/xen/cpu_hotplug.c +++ b/drivers/xen/cpu_hotplug.c @@ -21,29 +21,41 @@ static void disable_hotplug_cpu(int cpu) cpu_clear(cpu, cpu_present_map); } -static void vcpu_hotplug(unsigned int cpu) +static int vcpu_online(unsigned int cpu) { int err; char dir[32], state[32]; - if (!cpu_possible(cpu)) - return; - sprintf(dir, "cpu/%u", cpu); err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state); if (err != 1) { printk(KERN_ERR "XENBUS: Unable to read cpu state\n"); - return; + return err; } - if (strcmp(state, "online") == 0) { + if (strcmp(state, "online") == 0) + return 1; + else if (strcmp(state, "offline") == 0) + return 0; + + printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu); + return -EINVAL; +} +static void vcpu_hotplug(unsigned int cpu) +{ + if (!cpu_possible(cpu)) + return; + + switch (vcpu_online(cpu)) { + case 1: enable_hotplug_cpu(cpu); - } else if (strcmp(state, "offline") == 0) { + break; + case 0: (void)cpu_down(cpu); disable_hotplug_cpu(cpu); - } else { - printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", - state, cpu); + break; + default: + break; } } @@ -64,12 +76,20 @@ static void handle_vcpu_hotplug_event(struct xenbus_watch *watch, static int setup_cpu_watcher(struct notifier_block *notifier, unsigned long event, void *data) { + int cpu; static struct xenbus_watch cpu_watch = { .node = "cpu", .callback = handle_vcpu_hotplug_event}; (void)register_xenbus_watch(&cpu_watch); + for_each_possible_cpu(cpu) { + if (vcpu_online(cpu) == 0) { + (void)cpu_down(cpu); + cpu_clear(cpu, cpu_present_map); + } + } + return NOTIFY_DONE; } -- cgit v1.2.3-18-g5258 From 47948d2bd6d27648a107a27357b3bc5ad054ff64 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Apr 2009 11:42:47 +0900 Subject: serial: sh-sci: SH7724 support. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index d0aa82d7fce..84cc6512f08 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -91,6 +91,9 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -361,7 +364,8 @@ h8_sci_offset, h8_sci_size) \ CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ @@ -390,7 +394,8 @@ SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCxTDR, 0x20, 8) SCIF_FNS(SCxRDR, 0x24, 8) SCIF_FNS(SCLSR, 0x24, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) @@ -604,6 +609,17 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCFSR 0x0010 +# define SCASSR 0x0014 +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->type == PORT_SCIF) + return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + if (port->type == PORT_SCIFA) + return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { @@ -757,7 +773,8 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) static inline int scbrr_calc(struct uart_port *port, int bps, int clk) { if (port->type == PORT_SCIF) -- cgit v1.2.3-18-g5258 From d0deef5b14af7d5bbd0003a0a2a1a32326e20a6d Mon Sep 17 00:00:00 2001 From: Shawn Du Date: Tue, 14 Apr 2009 13:58:56 +0800 Subject: blktrace: support per-partition tracing Though one can specify '-d /dev/sda1' when using blktrace, it still traces the whole sda. To support per-partition tracing, when we start tracing, we initialize bt->start_lba and bt->end_lba to the start and end sector of that partition. Note some actions are per device, thus we don't filter 0-sector events. The original patch and discussion can be found here: http://marc.info/?l=linux-btrace&m=122949374214540&w=2 Signed-off-by: Shawn Du Signed-off-by: Li Zefan Acked-by: "Theodore Ts'o" Cc: Arnaldo Carvalho de Melo Cc: Jens Axboe LKML-Reference: <49E42620.4050701@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- drivers/scsi/sg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df9b0b..49c98730bb8 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1065,6 +1065,7 @@ sg_ioctl(struct inode *inode, struct file *filp, return blk_trace_setup(sdp->device->request_queue, sdp->disk->disk_name, MKDEV(SCSI_GENERIC_MAJOR, sdp->index), + NULL, (char *)arg); case BLKTRACESTART: return blk_trace_startstop(sdp->device->request_queue, 1); -- cgit v1.2.3-18-g5258 From 1e75540ec5202cae63cd238c86bd880e3d496546 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580..3a53e0834cf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3-18-g5258 From 853280a4dc8e3cc97ff10c1c02234d96078f437b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: use blk_run_queue() instead of blk_start_queueing() blk_start_queueing() is being phased out in favor of [__]blk_run_queue(). Switch. Signed-off-by: Tejun Heo --- drivers/ide/ide-park.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 310d03f2b5b..a914023d6d0 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -24,11 +24,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) start_queue = 1; spin_unlock_irq(&hwif->lock); - if (start_queue) { - spin_lock_irq(q->queue_lock); - blk_start_queueing(q); - spin_unlock_irq(q->queue_lock); - } + if (start_queue) + blk_run_queue(q); return; } spin_unlock_irq(&hwif->lock); -- cgit v1.2.3-18-g5258 From 55f3f399422a4a3f6cb84ea4096dfaddf8817399 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: don't set REQ_SOFTBARRIER ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it. Signed-off-by: Tejun Heo --- drivers/ide/ide-disk.c | 1 - drivers/ide/ide-ioctls.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a9fbe2c3121..c2438804d3c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -411,7 +411,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->cmd_flags |= REQ_SOFTBARRIER; rq->special = cmd; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index c1c25ebbaa1..5991b23793f 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -231,7 +231,6 @@ static int generic_drive_reset(ide_drive_t *drive) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; if (blk_execute_rq(drive->queue, NULL, rq, 1)) ret = rq->errors; blk_put_request(rq); -- cgit v1.2.3-18-g5258 From 1873b90cdea038715ec7140fccc2116fb930ffb5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-cd: clear sense buffer before issuing request sense Impact: code simplification ide_cd_request_sense_fixup() clears the tail of the sense buffer if the device didn't completely fill it. This patch makes cdrom_queue_request_sense() clear the sense buffer before issuing the command instead of clearing it afterwards. This simplifies code and eases future changes. Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3aec19d1fdf..509f1293cae 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -217,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, if (sense == NULL) sense = &info->sense_data; + memset(sense, 0, 18); + /* stuff the sense request in front of our current request */ blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; @@ -504,14 +506,8 @@ static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd) * and some drives don't send them. Sigh. */ if (rq->cmd[0] == GPCMD_REQUEST_SENSE && - cmd->nleft > 0 && cmd->nleft <= 5) { - unsigned int ofs = cmd->nbytes - cmd->nleft; - - while (cmd->nleft > 0) { - *((u8 *)rq->data + ofs++) = 0; - cmd->nleft--; - } - } + cmd->nleft > 0 && cmd->nleft <= 5) + cmd->nleft = 0; } int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, -- cgit v1.2.3-18-g5258 From 7f006dc24fae158131116c9472874f12e16cf040 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-floppy: block pc always uses bio Impact: remove unnecessary code path Block pc requests always use bio and rq->data is always NULL. No need to worry about !rq->bio cases in idefloppy_block_pc_cmd(). Note that ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg fine. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-floppy.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2b4868d95f8..3b22e066287 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -216,15 +216,13 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len && rq_data_dir(rq) == WRITE) - pc->flags |= PC_FLAG_WRITING; - pc->buf = rq->data; - if (rq->bio) + if (rq->data_len) { pc->flags |= PC_FLAG_DMA_OK; - /* - * possibly problematic, doesn't look like ide-floppy correctly - * handled scattered requests if dma fails... - */ + if (rq_data_dir(rq) == WRITE) + pc->flags |= PC_FLAG_WRITING; + } + /* pio will be performed by ide_pio_bytes() which handles sg fine */ + pc->buf = NULL; pc->req_xfer = pc->buf_size = rq->data_len; } -- cgit v1.2.3-18-g5258 From eace4cb04c0edc9388e987bf9bbdef461f6daca4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-taskfile: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide_raw_taskfile() directly uses rq->buffer to carry pointer to the data buffer. This complicates both block interface and ide backend request handling. Use blk_rq_map_kern() instead and drop special handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg(). Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it to initialize bio rw flag. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 5 +---- drivers/ide/ide-taskfile.c | 18 +++++++++++------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c..9b9e8b1aae5 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,10 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); - cmd->sg_nents = 1; - } else if (!rq->bio) { + if (!rq->bio) { sg_init_one(sg, rq->data, rq->data_len); cmd->sg_nents = 1; } else diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4aa6223c11b..f400eb4d4af 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -424,7 +424,9 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->buffer = buf; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + rq->cmd_flags |= REQ_RW; /* * (ks) We transfer currently only whole sectors. @@ -432,18 +434,20 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq->hard_nr_sectors = rq->nr_sectors = nsect; - rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } rq->special = cmd; cmd->rq = rq; error = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); +put_req: + blk_put_request(rq); return error; } -- cgit v1.2.3-18-g5258 From c267cc1c4db4ccb3406d045a8da8660f0bbfe08d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 7201b176d75..2894577237b 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -90,7 +90,7 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *)pc; + rq->special = (char *)pc; rq->rq_disk = disk; if (pc->req_xfer) { @@ -119,7 +119,7 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; - rq->buffer = (char *)pc; + rq->special = (char *)pc; if (pc->req_xfer) { rq->data = pc->buf; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3b22e066287..94600331a27 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -264,7 +264,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); } else if (blk_special_request(rq)) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3a53e0834cf..aadf53cfac6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -828,7 +828,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } if (rq->cmd[13] & REQ_IDETAPE_PC1) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; rq->cmd[13] &= ~(REQ_IDETAPE_PC1); rq->cmd[13] |= REQ_IDETAPE_PC2; goto out; -- cgit v1.2.3-18-g5258 From cbfd082abfcbed8c57a12636f36e9bead8d6cfc6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-cd uses rq->buffer to carry pointer to the original request when issuing REQUEST_SENSE. Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 509f1293cae..eb3c299d95d 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -232,8 +232,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; - /* NOTE! Save the failed command in "rq->buffer" */ - rq->buffer = (void *) failed_command; + /* NOTE! Save the failed command in "rq->special" */ + rq->special = (void *)failed_command; if (failed_command) ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", @@ -247,10 +247,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* - * For REQ_TYPE_SENSE, "rq->buffer" points to the original + * For REQ_TYPE_SENSE, "rq->special" points to the original * failed request */ - struct request *failed = (struct request *)rq->buffer; + struct request *failed = (struct request *)rq->special; struct cdrom_info *info = drive->driver_data; void *sense = &info->sense_data; -- cgit v1.2.3-18-g5258 From a1df5169f9bf08f6067029bfb840a05e282b1b97 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide: add helpers for preparing sense requests This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2894577237b..c6e03485a63 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -191,6 +191,67 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); +void ide_prep_sense(ide_drive_t *drive, struct request *rq) +{ + struct request_sense *sense = &drive->sense_data; + struct request *sense_rq = &drive->sense_rq; + unsigned int cmd_len, sense_len; + + debug_log("%s: enter\n", __func__); + + switch (drive->media) { + case ide_floppy: + cmd_len = 255; + sense_len = 18; + break; + case ide_tape: + cmd_len = 20; + sense_len = 20; + break; + default: + cmd_len = 18; + sense_len = 18; + } + + BUG_ON(sense_len > sizeof(*sense)); + + if (blk_sense_request(rq) || drive->sense_rq_armed) + return; + + memset(sense, 0, sizeof(*sense)); + + blk_rq_init(rq->q, sense_rq); + sense_rq->rq_disk = rq->rq_disk; + + sense_rq->data = sense; + sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; + sense_rq->cmd[4] = cmd_len; + sense_rq->data_len = sense_len; + + sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_flags |= REQ_PREEMPT; + + if (drive->media == ide_tape) + sense_rq->cmd[13] = REQ_IDETAPE_PC1; + + drive->sense_rq_armed = true; +} +EXPORT_SYMBOL_GPL(ide_prep_sense); + +void ide_queue_sense_rq(ide_drive_t *drive, void *special) +{ + BUG_ON(!drive->sense_rq_armed); + + drive->sense_rq.special = special; + drive->sense_rq_armed = false; + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, &drive->sense_rq, + ELEVATOR_INSERT_FRONT, 0); +} +EXPORT_SYMBOL_GPL(ide_queue_sense_rq); + /* * Called when an error was detected during the last packet command. * We queue a request sense packet command in the head of the request list. -- cgit v1.2.3-18-g5258 From 746d5e43274e9ea6cbd58818afc9239d41fb4e1e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: convert to using generic sense request Preallocate a sense request in the ->do_request method and reinitialize it only on demand, in case it's been consumed in the IRQ handler path. The reason for this is that we don't want to be mapping rq to bio in the IRQ path and introduce all kinds of unnecessary hacks to the block layer. tj: * Both user and kernel PC requests expect sense data to be stored in separate storage other than drive->sense_data. Copy sense data to rq->sense on completion if rq->sense is not NULL. This fixes bogus sense data on PC requests. As a result, remove cdrom_queue_request_sense. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 54 ++++++++++++---------------------------------------- drivers/ide/ide-cd.h | 4 ---- 2 files changed, 12 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb3c299d95d..7b21c7eac5b 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -206,44 +206,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, - struct request *failed_command) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = &drive->request_sense_rq; - - ide_debug_log(IDE_DBG_SENSE, "enter"); - - if (sense == NULL) - sense = &info->sense_data; - - memset(sense, 0, 18); - - /* stuff the sense request in front of our current request */ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = info->disk; - - rq->data = sense; - rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = 18; - rq->data_len = 18; - - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; - - /* NOTE! Save the failed command in "rq->special" */ - rq->special = (void *)failed_command; - - if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", - failed_command->cmd[0]); - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* @@ -251,11 +213,16 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) * failed request */ struct request *failed = (struct request *)rq->special; - struct cdrom_info *info = drive->driver_data; - void *sense = &info->sense_data; + struct request_sense *sense = &drive->sense_data; if (failed) { if (failed->sense) { + /* + * Sense is always read into drive->sense_data. + * Copy back if the failed request has its + * sense pointer set. + */ + memcpy(failed->sense, sense, 18); sense = failed->sense; failed->sense_len = rq->sense_len; } @@ -431,7 +398,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); + ide_queue_sense_rq(drive, NULL); return 1; end_request: @@ -445,7 +412,7 @@ end_request: hwif->rq = NULL; - cdrom_queue_request_sense(drive, rq->sense, rq); + ide_queue_sense_rq(drive, rq); return 1; } else return 2; @@ -893,6 +860,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, goto out_end; } + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 1d97101099c..93a3cf1b0f3 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -87,10 +87,6 @@ struct cdrom_info { struct atapi_toc *toc; - /* The result of the last successful request sense command - on this device. */ - struct request_sense sense_data; - u8 max_speed; /* Max speed of the drive. */ u8 current_speed; /* Current speed of the drive. */ -- cgit v1.2.3-18-g5258 From 6b544fcc8cd0a04eb42de9d1ecdd345e979d6ada Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 48 ++++++++++++++---------------------------------- drivers/ide/ide-floppy.c | 4 +++- drivers/ide/ide-tape.c | 7 +++++-- 3 files changed, 22 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index c6e03485a63..972c522516f 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -79,34 +79,6 @@ void ide_init_pc(struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_init_pc); -/* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. - */ -static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc, struct request *rq) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->special = (char *)pc; - rq->rq_disk = disk; - - if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; - } - - memcpy(rq->cmd, pc->c, 12); - if (drive->media == ide_tape) - rq->cmd[13] = REQ_IDETAPE_PC1; - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - /* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. @@ -254,18 +226,26 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); /* * Called when an error was detected during the last packet command. - * We queue a request sense packet command in the head of the request list. + * We queue a request sense packet command at the head of the request + * queue. */ -void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +void ide_retry_pc(ide_drive_t *drive) { - struct request *rq = &drive->request_sense_rq; + struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); - ide_create_request_sense_cmd(drive, pc); + + /* init pc from sense_rq */ + ide_init_pc(pc); + memcpy(pc->c, sense_rq->cmd, 12); + pc->buf = sense_rq->data; + pc->req_xfer = sense_rq->data_len; + if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_pc_head(drive, disk, pc, rq); + + ide_queue_sense_rq(drive, pc); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -404,7 +384,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - ide_retry_pc(drive, rq->rq_disk); + ide_retry_pc(drive); /* queued, but not started */ return ide_stopped; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 94600331a27..d3302cc891e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -263,7 +263,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq)) { + } else if (blk_special_request(rq) || blk_sense_request(rq)) { pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; @@ -273,6 +273,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index aadf53cfac6..8324dfa78a3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -695,7 +695,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - ide_retry_pc(drive, tape->disk); + ide_retry_pc(drive); return ide_stopped; } pc->error = 0; @@ -752,7 +752,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, (unsigned long long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); - if (!blk_special_request(rq)) { + if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); @@ -840,6 +840,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, BUG(); out: + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) -- cgit v1.2.3-18-g5258 From 5c4be57249e2e09136446597d2fe2a967c6ffef0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd,atapi: use bio for internal commands Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 52 +++++++++++++++++++++++++++++-------------------- drivers/ide/ide-cd.c | 28 +++++++++++++------------- drivers/ide/ide-io.c | 3 +++ drivers/ide/ide-tape.c | 3 +++ 4 files changed, 51 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 972c522516f..5cefe12f562 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -94,16 +94,18 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq->special = (char *)pc; if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; + error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer, + GFP_NOIO); + if (error) + goto put_req; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); +put_req: blk_put_request(rq); - return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); @@ -168,6 +170,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) struct request_sense *sense = &drive->sense_data; struct request *sense_rq = &drive->sense_rq; unsigned int cmd_len, sense_len; + int err; debug_log("%s: enter\n", __func__); @@ -193,13 +196,19 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) memset(sense, 0, sizeof(*sense)); blk_rq_init(rq->q, sense_rq); - sense_rq->rq_disk = rq->rq_disk; - sense_rq->data = sense; + err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, + GFP_NOIO); + if (unlikely(err)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: failed to map sense buffer\n", + drive->name); + return; + } + + sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; sense_rq->cmd[4] = cmd_len; - sense_rq->data_len = sense_len; - sense_rq->cmd_type = REQ_TYPE_SENSE; sense_rq->cmd_flags |= REQ_PREEMPT; @@ -210,9 +219,14 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) } EXPORT_SYMBOL_GPL(ide_prep_sense); -void ide_queue_sense_rq(ide_drive_t *drive, void *special) +int ide_queue_sense_rq(ide_drive_t *drive, void *special) { - BUG_ON(!drive->sense_rq_armed); + /* deferred failure from ide_prep_sense() */ + if (!drive->sense_rq_armed) { + printk(KERN_WARNING "%s: failed queue sense request\n", + drive->name); + return -ENOMEM; + } drive->sense_rq.special = special; drive->sense_rq_armed = false; @@ -221,6 +235,7 @@ void ide_queue_sense_rq(ide_drive_t *drive, void *special) elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT, 0); + return 0; } EXPORT_SYMBOL_GPL(ide_queue_sense_rq); @@ -239,13 +254,14 @@ void ide_retry_pc(ide_drive_t *drive) /* init pc from sense_rq */ ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); - pc->buf = sense_rq->data; + pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ pc->req_xfer = sense_rq->data_len; if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_sense_rq(drive, pc); + if (ide_queue_sense_rq(drive, pc)) + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -317,7 +333,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xferfunc; unsigned int timeout, done; u16 bcount; u8 stat, ireason, dsc = 0; @@ -411,7 +426,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape) + if (drive->media == ide_tape && !rq->bio) done = ide_rq_bytes(rq); /* FIXME */ else done = blk_rq_bytes(rq); @@ -448,16 +463,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - xferfunc = write ? tp_ops->output_data : tp_ops->input_data; - - if (drive->media == ide_floppy && pc->buf == NULL) { + if (drive->media == ide_tape && pc->bh) + done = drive->pc_io_buffers(drive, pc, bcount, write); + else { done = min_t(unsigned int, bcount, cmd->nleft); ide_pio_bytes(drive, cmd, write, done); - } else if (drive->media == ide_tape && pc->bh) { - done = drive->pc_io_buffers(drive, pc, bcount, write); - } else { - done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred); - xferfunc(drive, NULL, pc->cur_pos, done); } /* Update the current position */ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 7b21c7eac5b..392a5bdf2fd 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -210,10 +210,12 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* * For REQ_TYPE_SENSE, "rq->special" points to the original - * failed request + * failed request. Also, the sense data should be read + * directly from rq which might be different from the original + * sense buffer if it got copied during mapping. */ struct request *failed = (struct request *)rq->special; - struct request_sense *sense = &drive->sense_data; + void *sense = bio_data(rq->bio); if (failed) { if (failed->sense) { @@ -398,7 +400,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - ide_queue_sense_rq(drive, NULL); + return ide_queue_sense_rq(drive, NULL) ? 2 : 1; return 1; end_request: @@ -412,8 +414,7 @@ end_request: hwif->rq = NULL; - ide_queue_sense_rq(drive, rq); - return 1; + return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; } @@ -507,8 +508,12 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, rq->cmd_flags |= cmd_flags; rq->timeout = timeout; if (buffer) { - rq->data = buffer; - rq->data_len = *bufflen; + error = blk_rq_map_kern(drive->queue, rq, buffer, + *bufflen, GFP_NOIO); + if (error) { + blk_put_request(rq); + return error; + } } error = blk_execute_rq(drive->queue, info->disk, rq, 0); @@ -802,15 +807,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) drive->dma = 0; /* sg request */ - if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + if (rq->bio) { struct request_queue *q = drive->queue; + char *buf = bio_data(rq->bio); unsigned int alignment; - char *buf; - - if (rq->bio) - buf = bio_data(rq->bio); - else - buf = rq->data; drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9b9e8b1aae5..3245c2dbda3 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -481,6 +481,9 @@ void do_ide_request(struct request_queue *q) spin_unlock_irq(q->queue_lock); + /* HLD do_request() callback might sleep, make sure it's okay */ + might_sleep(); + if (ide_lock_host(host, hwif)) goto plug_device_2; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8324dfa78a3..9b762a2d5d9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -850,6 +850,9 @@ out: cmd.rq = rq; + ide_init_sg_cmd(&cmd, pc->req_xfer); + ide_map_sg(drive, &cmd); + return ide_tape_issue_pc(drive, &cmd, pc); } -- cgit v1.2.3-18-g5258 From fc38b521dcffcb07447cd98fedc56f495c10b90d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:43 +0900 Subject: ide-pm: don't abuse rq->data Impact: cleanup rq->data usage ide-pm uses rq->data to carry pointer to struct request_pm_state through request queue and rq->special is used to carray pointer to local struct ide_cmd, which isn't necessary. Use rq->special for request_pm_state instead and use local ide_cmd in ide_start_power_step(). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-pm.c | 38 +++++++++++++++----------------------- 2 files changed, 16 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 3245c2dbda3..6e3094e2277 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -368,7 +368,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 0d8a151c0a0..ba1488bd843 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int ret; /* call ACPI _GTM only once */ @@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_acpi_get_timing(hwif); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; @@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int err; /* call ACPI _PS0 / _STM only once */ @@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; @@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; - struct ide_cmd *cmd = rq->special; - - memset(cmd, 0, sizeof(*cmd)); + struct request_pm_state *pm = rq->special; + struct ide_cmd cmd = { }; switch (pm->pm_step) { case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ @@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) - cmd->tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - cmd->tf.command = ATA_CMD_FLUSH; + cmd.tf.command = ATA_CMD_FLUSH; goto out_do_tf; case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - cmd->tf.command = ATA_CMD_STANDBYNOW1; + cmd.tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ - cmd->tf.command = ATA_CMD_IDLEIMMEDIATE; + cmd.tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* @@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; - cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - cmd->protocol = ATA_PROT_NODATA; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_NODATA; - return do_rw_taskfile(drive, cmd); + return do_rw_taskfile(drive, &cmd); } /** @@ -181,7 +173,7 @@ out_do_tf: void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; unsigned long flags; ide_complete_power_step(drive, rq); @@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; if (blk_pm_suspend_request(rq) && pm->pm_step == IDE_PM_START_SUSPEND) -- cgit v1.2.3-18-g5258 From ea7066afcd590e4663e6dc010f93704164050f48 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape,floppy: fix failed command completion after request sense Impact: fix infinite retry loop After a command failed, ide-tape and floppy inserts REQUEST_SENSE in front of the failed command and according to the result, sets pc->retries, flags and errors. After REQUEST_SENSE is complete, the failed command is again at the front of the queue and if the verdict was to terminate the request, the issue functions tries to complete it directly by calling drive->pc_callback() and returning ide_stopped. However, drive->pc_callback() doesn't complete a request. It only prepares for completion of the request. As a result, this creates an infinite loop where the failed request is retried perpetually. Fix it by actually ending the request by calling ide_complete_rq(). Signed-off-by: Tejun Heo --- drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-tape.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d3302cc891e..d20704ac318 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -141,6 +141,7 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 9b762a2d5d9..2b9a13671c5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -643,6 +643,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, } drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From b3071d190d6757b14af002a9d79832f12de61bce Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 16 ++++++++++------ drivers/ide/ide-floppy.c | 5 ++++- drivers/ide/ide-tape.c | 5 ++++- 3 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 5cefe12f562..3df5442de71 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -409,6 +409,16 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; + /* + * ->pc_callback() might change rq->data_len for + * residual count, cache total length. + */ + if (!blk_special_request(rq) && + (drive->media == ide_tape && !rq->bio)) + done = ide_rq_bytes(rq); /* FIXME */ + else + done = blk_rq_bytes(rq); + /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -417,7 +427,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (blk_special_request(rq)) { rq->errors = 0; - done = blk_rq_bytes(rq); error = 0; } else { @@ -426,11 +435,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape && !rq->bio) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); - error = uptodate ? 0 : -EIO; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d20704ac318..537b7c55803 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -134,14 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); + /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2b9a13671c5..8226d52504d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -622,6 +622,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the @@ -641,9 +643,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; } + drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From 35ab8d3251833e4052aa64b09b08195e949518c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use single continuous buffer Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers ide-tape has its own multiple buffer mechanism using struct idetape_bh. It allocates buffer with decreasing order-of-two allocations so that it results in minimum number of segments. However, the implementation is quite complex and works in a way that no other block or ide driver works necessitating a lot of special case handling. The benefit this complex allocation scheme brings is questionable as PIO or DMA the number of segments (16 maximum) doesn't make any noticeable difference and it also doesn't negate the need for multiple order allocation which can fail under memory pressure or high fragmentation although it does lower the highest order necessary by one when the buffer size isn't power of two. As the first step to remove the custom buffer management, this patch makes ide-tape allocate single continous buffer. The maximum order is four. I doubt the change would cause any trouble but if it ever matters, it should be converted to regular sg mechanism like everyone else and even in that case dropping custom buffer handling and moving to standard mechanism first make sense as an intermediate step. This patch makes the first bh to contain the whole buffer and drops multi bh handling code. Following patches will make further changes. This patch has the side effect of killing OOM triggered by allocation path and fixing DMA transfers. Previously, bug in alloc path triggered OOM on command issue and commands were passed to DMA engine without DMA-mapping all the segments. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 256 +++++++++++-------------------------------------- 1 file changed, 58 insertions(+), 198 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8226d52504d..b2afbc7bcb6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -134,7 +134,6 @@ enum { struct idetape_bh { u32 b_size; atomic_t b_count; - struct idetape_bh *b_reqnext; char *b_data; }; @@ -228,10 +227,6 @@ typedef struct ide_tape_obj { char *b_data; int b_count; - int pages_per_buffer; - /* Wasted space in each stage */ - int excess_bh_size; - /* Measures average tape speed */ unsigned long avg_time; int avg_size; @@ -303,9 +298,7 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min( (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); @@ -313,15 +306,10 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + if (atomic_read(&bh->b_count) == bh->b_size) + pc->bh = NULL; } - pc->bh = bh; - return bcount; } @@ -331,22 +319,14 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min((unsigned int)pc->b_count, (unsigned int)bcount); drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); bcount -= count; pc->b_data += count; pc->b_count -= count; - if (!pc->b_count) { - bh = bh->b_reqnext; - pc->bh = bh; - if (bh) { - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - } - } + if (!pc->b_count) + pc->bh = NULL; } return bcount; @@ -355,24 +335,20 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; - int count; unsigned int bcount = pc->xferred; if (pc->flags & PC_FLAG_WRITING) return; - while (bcount) { - if (bh == NULL) { + if (bcount) { + if (bh == NULL || bcount > bh->b_size) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return; } - count = min((unsigned int)bh->b_size, (unsigned int)bcount); - atomic_set(&bh->b_count, count); + atomic_set(&bh->b_count, bcount); if (atomic_read(&bh->b_count) == bh->b_size) - bh = bh->b_reqnext; - bcount -= count; + pc->bh = NULL; } - pc->bh = bh; } /* @@ -439,24 +415,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* Free data buffers completely. */ static void ide_tape_kfree_buffer(idetape_tape_t *tape) { - struct idetape_bh *prev_bh, *bh = tape->merge_bh; - - while (bh) { - u32 size = bh->b_size; - - while (size) { - unsigned int order = fls(size >> PAGE_SHIFT)-1; - - if (bh->b_data) - free_pages((unsigned long)bh->b_data, order); + struct idetape_bh *bh = tape->merge_bh; - size &= (order-1); - bh->b_data += (1 << order) * PAGE_SIZE; - } - prev_bh = bh; - bh = bh->b_reqnext; - kfree(prev_bh); - } + kfree(bh->b_data); + kfree(bh); } static void ide_tape_handle_dsc(ide_drive_t *); @@ -861,117 +823,50 @@ out: } /* - * The function below uses __get_free_pages to allocate a data buffer of size - * tape->buffer_size (or a bit more). We attempt to combine sequential pages as - * much as possible. - * - * It returns a pointer to the newly allocated buffer, or NULL in case of - * failure. + * It returns a pointer to the newly allocated buffer, or NULL in case + * of failure. */ static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full, int clear) -{ - struct idetape_bh *prev_bh, *bh, *merge_bh; - int pages = tape->pages_per_buffer; - unsigned int order, b_allocd; - char *b_data = NULL; - - merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = merge_bh; - if (bh == NULL) - goto abort; - - order = fls(pages) - 1; - bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!bh->b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - pages &= (order-1); - - if (clear) - memset(bh->b_data, 0, b_allocd); - bh->b_reqnext = NULL; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); + int full) +{ + struct idetape_bh *bh; - while (pages) { - order = fls(pages) - 1; - b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - - if (clear) - memset(b_data, 0, b_allocd); - - /* newly allocated page frames below buffer header or ...*/ - if (bh->b_data == b_data + b_allocd) { - bh->b_size += b_allocd; - bh->b_data -= b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - /* they are above the header */ - if (b_data == bh->b_data + bh->b_size) { - bh->b_size += b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - prev_bh = bh; - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) { - free_pages((unsigned long) b_data, order); - goto abort; - } - bh->b_reqnext = NULL; - bh->b_data = b_data; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - prev_bh->b_reqnext = bh; + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) + return NULL; - pages &= (order-1); + bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!bh->b_data) { + kfree(bh); + return NULL; } - bh->b_size -= tape->excess_bh_size; - if (full) - atomic_sub(tape->excess_bh_size, &bh->b_count); - return merge_bh; -abort: - ide_tape_kfree_buffer(tape); - return NULL; + bh->b_size = tape->buffer_size; + atomic_set(&bh->b_count, full ? bh->b_size : 0); + + return bh; } static int idetape_copy_stage_from_user(idetape_tape_t *tape, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min((unsigned int) - (bh->b_size - atomic_read(&bh->b_count)), - (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - count)) + n)) ret = 1; - n -= count; - atomic_add(count, &bh->b_count); - buf += count; - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + atomic_add(n, &bh->b_count); + if (atomic_read(&bh->b_count) == bh->b_size) + tape->bh = NULL; } - tape->bh = bh; + return ret; } @@ -979,30 +874,20 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > tape->b_count) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min(tape->b_count, n); - if (copy_to_user(buf, tape->b_data, count)) + if (copy_to_user(buf, tape->b_data, n)) ret = 1; - n -= count; - tape->b_data += count; - tape->b_count -= count; - buf += count; - if (!tape->b_count) { - bh = bh->b_reqnext; - tape->bh = bh; - if (bh) { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } - } + tape->b_data += n; + tape->b_count -= n; + if (!tape->b_count) + tape->bh = NULL; } return ret; } @@ -1254,7 +1139,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks, min; + int blocks; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { @@ -1269,31 +1154,16 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) if (tape->merge_bh_size) { blocks = tape->merge_bh_size / tape->blk_size; if (tape->merge_bh_size % tape->blk_size) { - unsigned int i; - + unsigned int i = tape->blk_size - + tape->merge_bh_size % tape->blk_size; blocks++; - i = tape->blk_size - tape->merge_bh_size % - tape->blk_size; - bh = tape->bh->b_reqnext; - while (bh) { - atomic_set(&bh->b_count, 0); - bh = bh->b_reqnext; - } bh = tape->bh; - while (i) { - if (bh == NULL) { - printk(KERN_INFO "ide-tape: bug," - " bh NULL\n"); - break; - } - min = min(i, (unsigned int)(bh->b_size - - atomic_read(&bh->b_count))); + if (bh) { memset(bh->b_data + atomic_read(&bh->b_count), - 0, min); - atomic_add(min, &bh->b_count); - i -= min; - bh = bh->b_reqnext; - } + 0, i); + atomic_add(i, &bh->b_count); + } else + printk(KERN_INFO "ide-tape: bug, bh NULL\n"); } (void) idetape_add_chrdev_write_request(drive, blocks); tape->merge_bh_size = 0; @@ -1321,7 +1191,7 @@ static int idetape_init_read(ide_drive_t *drive) " 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -1368,23 +1238,18 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh; + struct idetape_bh *bh = tape->merge_bh; int blocks; while (bcount) { unsigned int count; - bh = tape->merge_bh; count = min(tape->buffer_size, bcount); bcount -= count; blocks = count / tape->blk_size; - while (count) { - atomic_set(&bh->b_count, - min(count, (unsigned int)bh->b_size)); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - count -= atomic_read(&bh->b_count); - bh = bh->b_reqnext; - } + atomic_set(&bh->b_count, count); + memset(bh->b_data, 0, atomic_read(&bh->b_count)); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_bh); } @@ -1596,7 +1461,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, "should be 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; @@ -1970,7 +1835,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); if (tape->merge_bh != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); @@ -2201,11 +2066,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->buffer_size = *ctl * tape->blk_size; } buffer_size = tape->buffer_size; - tape->pages_per_buffer = buffer_size / PAGE_SIZE; - if (buffer_size % PAGE_SIZE) { - tape->pages_per_buffer++; - tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; - } /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); -- cgit v1.2.3-18-g5258 From 21d9c5d227593d15630ae83a336d1519653e9b8a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use standard data transfer mechanism Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 6 +-- drivers/ide/ide-tape.c | 112 ++++++++++-------------------------------------- 2 files changed, 24 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3df5442de71..b9dd4503cbc 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -413,11 +413,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) * ->pc_callback() might change rq->data_len for * residual count, cache total length. */ - if (!blk_special_request(rq) && - (drive->media == ide_tape && !rq->bio)) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); + done = blk_rq_bytes(rq); /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b2afbc7bcb6..b373ac87635 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -292,65 +292,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min( - (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), - bcount); - drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data + - atomic_read(&bh->b_count), count); - bcount -= count; - atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } - - return bcount; -} - -static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min((unsigned int)pc->b_count, (unsigned int)bcount); - drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); - bcount -= count; - pc->b_data += count; - pc->b_count -= count; - if (!pc->b_count) - pc->bh = NULL; - } - - return bcount; -} - -static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct idetape_bh *bh = pc->bh; - unsigned int bcount = pc->xferred; - - if (pc->flags & PC_FLAG_WRITING) - return; - if (bcount) { - if (bh == NULL || bcount > bh->b_size) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - atomic_set(&bh->b_count, bcount); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -368,12 +309,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->xferred by asking the tape. */ - if (pc->flags & PC_FLAG_DMA_ERROR) { + if (pc->flags & PC_FLAG_DMA_ERROR) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(drive, pc); - } /* * If error was the result of a zero-length read or write command, @@ -458,7 +397,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; + rq->data_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -520,19 +459,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - unsigned int bleft; - - if (write) - bleft = idetape_output_buffers(drive, pc, bcount); - else - bleft = idetape_input_buffers(drive, pc, bcount); - - return bcount - bleft; -} - /* * Packet Command Interface * @@ -683,7 +609,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = bh; + pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; @@ -1063,10 +989,12 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; + size_t size = blocks * tape->blk_size; struct request *rq; - int ret, errors; + int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -1074,21 +1002,29 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->rq_disk = tape->disk; rq->special = (void *)bh; rq->sector = tape->first_frame; - rq->nr_sectors = blocks; - rq->current_nr_sectors = blocks; + + if (size) { + ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + __GFP_WAIT); + if (ret) + goto out_put; + } + blk_execute_rq(drive->queue, tape->disk, rq, 0); - errors = rq->errors; - ret = tape->blk_size * (blocks - rq->current_nr_sectors); - blk_put_request(rq); + /* calculate the number of transferred bytes and update bh */ + size -= rq->data_len; + if (cmd == REQ_IDETAPE_READ) + atomic_add(size, &bh->b_count); - if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) - return 0; + ret = size; + if (rq->errors == IDE_DRV_ERROR_GENERAL) + ret = -EIO; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (errors == IDE_DRV_ERROR_GENERAL) - return -EIO; +out_put: + blk_put_request(rq); return ret; } @@ -2034,8 +1970,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) u16 *ctl = (u16 *)&tape->caps[12]; drive->pc_callback = ide_tape_callback; - drive->pc_update_buffers = idetape_update_buffers; - drive->pc_io_buffers = ide_tape_io_buffers; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; -- cgit v1.2.3-18-g5258 From 963da55c4b9eeeb2085ca74ba927cf77bce966d4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: kill idetape_bh Impact: kill now unnecessary idetape_bh With everything using standard mechanisms, there is no need for idetape_bh anymore. Kill it and use tape->buf, cur and valid to describe data buffer instead. Changes worth mentioning are... * idetape_queue_rq_tail() now always queue tape->buf and and adjusts buffer state properly before completion. * idetape_pad_zeros() clears the buffer only once. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 305 ++++++++++++++----------------------------------- 1 file changed, 84 insertions(+), 221 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b373ac87635..d2e9c09b521 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -131,12 +131,6 @@ enum { IDETAPE_DIR_WRITE = (1 << 2), }; -struct idetape_bh { - u32 b_size; - atomic_t b_count; - char *b_data; -}; - /* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 @@ -218,14 +212,12 @@ typedef struct ide_tape_obj { /* Data buffer size chosen based on the tape's recommendation */ int buffer_size; - /* merge buffer */ - struct idetape_bh *merge_bh; - /* size of the merge buffer */ - int merge_bh_size; - /* pointer to current buffer head within the merge buffer */ - struct idetape_bh *bh; - char *b_data; - int b_count; + /* Staging buffer of buffer_size bytes */ + void *buf; + /* The read/write cursor */ + void *cur; + /* The number of valid bytes in buf */ + size_t valid; /* Measures average tape speed */ unsigned long avg_time; @@ -351,15 +343,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -/* Free data buffers completely. */ -static void ide_tape_kfree_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - - kfree(bh->b_data); - kfree(bh); -} - static void ide_tape_handle_dsc(ide_drive_t *); static int ide_tape_callback(ide_drive_t *drive, int dsc) @@ -603,8 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - struct idetape_bh *bh = (struct idetape_bh *)rq->special; - unsigned int length = rq->current_nr_sectors; + unsigned int length = rq->nr_sectors; ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -616,14 +598,11 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; - if (opcode == READ_6) { + if (opcode == READ_6) pc->c[0] = READ_6; - atomic_set(&bh->b_count, 0); - } else if (opcode == WRITE_6) { + else if (opcode == WRITE_6) { pc->c[0] = WRITE_6; pc->flags |= PC_FLAG_WRITING; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); } memcpy(rq->cmd, pc->c, 12); @@ -639,10 +618,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," - " current_nr_sectors: %u\n", - (unsigned long long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ @@ -748,89 +725,6 @@ out: return ide_tape_issue_pc(drive, &cmd, pc); } -/* - * It returns a pointer to the newly allocated buffer, or NULL in case - * of failure. - */ -static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full) -{ - struct idetape_bh *bh; - - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) - return NULL; - - bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!bh->b_data) { - kfree(bh); - return NULL; - } - - bh->b_size = tape->buffer_size; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - - return bh; -} - -static int idetape_copy_stage_from_user(idetape_tape_t *tape, - const char __user *buf, int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - n)) - ret = 1; - atomic_add(n, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - tape->bh = NULL; - } - - return ret; -} - -static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > tape->b_count) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_to_user(buf, tape->b_data, n)) - ret = 1; - tape->b_data += n; - tape->b_count -= n; - if (!tape->b_count) - tape->bh = NULL; - } - return ret; -} - -static void idetape_init_merge_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - tape->bh = tape->merge_bh; - - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) - atomic_set(&bh->b_count, 0); - else { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -928,10 +822,10 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) return; clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags); - tape->merge_bh_size = 0; - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + tape->valid = 0; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; @@ -985,8 +879,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, - struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) { idetape_tape_t *tape = drive->driver_data; size_t size = blocks * tape->blk_size; @@ -1000,11 +893,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->special = (void *)bh; rq->sector = tape->first_frame; if (size) { - ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, __GFP_WAIT); if (ret) goto out_put; @@ -1012,17 +904,17 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, blk_execute_rq(drive->queue, tape->disk, rq, 0); - /* calculate the number of transferred bytes and update bh */ + /* calculate the number of transferred bytes and update buffer state */ size -= rq->data_len; + tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) - atomic_add(size, &bh->b_count); + tape->valid = size; + else + tape->valid = 0; ret = size; if (rq->errors == IDE_DRV_ERROR_GENERAL) ret = -EIO; - - if (tape->merge_bh) - idetape_init_merge_buffer(tape); out_put: blk_put_request(rq); return ret; @@ -1064,49 +956,33 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) /* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks; - struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_bh_size > tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_bh_size = tape->buffer_size; - } - if (tape->merge_bh_size) { - blocks = tape->merge_bh_size / tape->blk_size; - if (tape->merge_bh_size % tape->blk_size) { - unsigned int i = tape->blk_size - - tape->merge_bh_size % tape->blk_size; + if (tape->buf) { + blocks = tape->valid / tape->blk_size; + if (tape->valid % tape->blk_size) { blocks++; - bh = tape->bh; - if (bh) { - memset(bh->b_data + atomic_read(&bh->b_count), - 0, i); - atomic_add(i, &bh->b_count); - } else - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + memset(tape->buf + tape->valid, 0, + tape->blk_size - tape->valid % tape->blk_size); } (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_bh_size = 0; } - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; } @@ -1122,15 +998,15 @@ static int idetape_init_read(ide_drive_t *drive) ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size should be" - " 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; + tape->cur = tape->buf; /* * Issue a read 0 command to ensure that DSC handshake is @@ -1140,11 +1016,10 @@ static int idetape_init_read(ide_drive_t *drive) */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0, - tape->merge_bh); + REQ_IDETAPE_READ, 0); if (bytes_read < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } @@ -1157,8 +1032,6 @@ static int idetape_init_read(ide_drive_t *drive) /* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* If we are at a filemark, return a read length of 0 */ @@ -1167,27 +1040,21 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_read(drive); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh = tape->merge_bh; - int blocks; + + memset(tape->buf, 0, tape->buffer_size); while (bcount) { - unsigned int count; + unsigned int count = min(tape->buffer_size, bcount); - count = min(tape->buffer_size, bcount); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + count / tape->blk_size); bcount -= count; - blocks = count / tape->blk_size; - atomic_set(&bh->b_count, count); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_bh); } } @@ -1267,7 +1134,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - tape->merge_bh_size = 0; + tape->valid = 0; if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) ++count; ide_tape_discard_merge_buffer(drive, 0); @@ -1333,20 +1200,20 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, return rc; if (count == 0) return (0); - if (tape->merge_bh_size) { - actually_read = min((unsigned int)(tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, actually_read)) + if (tape->valid) { + actually_read = min_t(unsigned int, tape->valid, count); + if (copy_to_user(buf, tape->cur, actually_read)) ret = -EFAULT; buf += actually_read; - tape->merge_bh_size -= actually_read; count -= actually_read; + tape->cur += actually_read; + tape->valid -= actually_read; } while (count >= tape->buffer_size) { bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, bytes_read)) + if (copy_to_user(buf, tape->cur, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -1357,10 +1224,11 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, temp)) + if (copy_to_user(buf, tape->cur, temp)) ret = -EFAULT; actually_read += temp; - tape->merge_bh_size = bytes_read-temp; + tape->cur += temp; + tape->valid -= temp; } finish: if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { @@ -1392,16 +1260,15 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { if (tape->chrdev_dir == IDETAPE_DIR_READ) ide_tape_discard_merge_buffer(drive, 1); - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size " - "should be 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_buffer(tape); + tape->cur = tape->buf; /* * Issue a write 0 command to ensure that DSC handshake is @@ -1411,11 +1278,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0, - tape->merge_bh); + REQ_IDETAPE_WRITE, 0); if (retval < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } @@ -1423,23 +1289,19 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->merge_bh_size) { - if (tape->merge_bh_size >= tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_bh_size = 0; - } - actually_written = min((unsigned int) - (tape->buffer_size - tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_from_user(tape, buf, actually_written)) - ret = -EFAULT; + if (tape->valid < tape->buffer_size) { + actually_written = min_t(unsigned int, + tape->buffer_size - tape->valid, + count); + if (copy_from_user(tape->cur, buf, actually_written)) + ret = -EFAULT; buf += actually_written; - tape->merge_bh_size += actually_written; count -= actually_written; + tape->cur += actually_written; + tape->valid += actually_written; - if (tape->merge_bh_size == tape->buffer_size) { + if (tape->valid == tape->buffer_size) { ssize_t retval; - tape->merge_bh_size = 0; retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); @@ -1447,7 +1309,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } while (count >= tape->buffer_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) + if (copy_from_user(tape->cur, buf, tape->buffer_size)) ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; @@ -1458,9 +1320,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, buf, count)) + if (copy_from_user(tape->cur, buf, count)) ret = -EFAULT; - tape->merge_bh_size += count; + tape->cur += count; + tape->valid += count; } return ret ? ret : actually_written; } @@ -1623,7 +1486,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = tape->merge_bh_size / + block_offset = tape->valid / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -1771,12 +1634,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); - if (tape->merge_bh != NULL) { + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (tape->buf != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -2042,7 +1905,7 @@ static void ide_tape_release(struct device *dev) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->merge_bh_size); + BUG_ON(tape->valid); drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; -- cgit v1.2.3-18-g5258 From 88f1b941c5c94016a59144a3c94c9ca31eb16205 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: unify r/w init paths Impact: cleanup Read and write init paths are almost identical. Unify them into idetape_init_rw(). Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 110 +++++++++++++++++++++---------------------------- 1 file changed, 46 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d2e9c09b521..4da7fa9bca1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; + int rc; - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; - tape->cur = tape->buf; + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0); - if (bytes_read < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } + if (tape->chrdev_dir == dir) + return 0; + + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } + + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } + + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; + + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; } } @@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) return 0; - idetape_init_read(drive); + idetape_init_rw(drive, IDETAPE_DIR_READ); return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } @@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; if (count == 0) @@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ssize_t actually_written = 0; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) @@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - tape->cur = tape->buf; - - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0); - if (retval < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; if (count == 0) return (0); if (tape->valid < tape->buffer_size) { -- cgit v1.2.3-18-g5258 From 6bb11dd14f70228f8dab25fd25dabeb9bc74926d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: use byte size instead of sectors on rw issue functions Impact: cleanup Byte size is what most issue functions deal with, make idetape_queue_rw_tail() and its wrappers take byte size instead of sector counts. idetape_chrdev_read() and write() functions are converted to use tape->buffer_size instead of ctl from tape->cap. This cleans up code a little bit and will ease the next r/w reimplementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 45 ++++++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4da7fa9bca1..d5e9bb286e3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) { idetape_tape_t *tape = drive->driver_data; - size_t size = blocks * tape->blk_size; struct request *rq; int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); + BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) } /* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) { debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" @@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) return; } if (tape->buf) { - blocks = tape->valid / tape->blk_size; - if (tape->valid % tape->blk_size) { - blocks++; - memset(tape->buf + tape->valid, 0, - tape->blk_size - tape->valid % tape->blk_size); - } - (void) idetape_add_chrdev_write_request(drive, blocks); - } - if (tape->buf != NULL) { + size_t aligned = roundup(tape->valid, tape->blk_size); + + memset(tape->cur, 0, aligned - tape->valid); + idetape_add_chrdev_write_request(drive, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1038,9 +1032,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) } /* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) { - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); + debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) @@ -1048,7 +1042,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_rw(drive, IDETAPE_DIR_READ); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -1060,8 +1054,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) while (bcount) { unsigned int count = min(tape->buffer_size, bcount); - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - count / tape->blk_size); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count); bcount -= count; } } @@ -1193,7 +1186,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1218,7 +1210,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, tape->valid -= actually_read; } while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; if (copy_to_user(buf, tape->cur, bytes_read)) @@ -1228,7 +1221,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -1256,7 +1250,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; int rc; /* The drive is write protected. */ @@ -1284,7 +1277,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->valid == tape->buffer_size) { ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); if (retval <= 0) return (retval); } @@ -1295,7 +1289,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); actually_written += tape->buffer_size; if (retval <= 0) return (retval); -- cgit v1.2.3-18-g5258 From 07bd9686c50c2b1f10e48089d4fb836a971f5177 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: simplify read/write functions Impact: cleanup idetape_chrdev_read/write() functions are unnecessarily complex when everything can be handled in a single loop. Collapse idetape_add_chrdev_read/write_request() into the rw functions and simplify the implementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 149 +++++++++++++++++-------------------------------- 1 file changed, 50 insertions(+), 99 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d5e9bb286e3..2599579e417 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -953,14 +953,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -/* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); -} - static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -974,7 +966,7 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) size_t aligned = roundup(tape->valid, tape->blk_size); memset(tape->cur, 0, aligned - tape->valid); - idetape_add_chrdev_write_request(drive, aligned); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1031,20 +1023,6 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) return 0; } -/* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); - - /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) - return 0; - - idetape_init_rw(drive, IDETAPE_DIR_READ); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); -} - static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; @@ -1184,8 +1162,9 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t bytes_read, temp, actually_read = 0, rc; + size_t done = 0; ssize_t ret = 0; + int rc; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1195,52 +1174,43 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid) { - actually_read = min_t(unsigned int, tape->valid, count); - if (copy_to_user(buf, tape->cur, actually_read)) - ret = -EFAULT; - buf += actually_read; - count -= actually_read; - tape->cur += actually_read; - tape->valid -= actually_read; - } - while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - if (copy_to_user(buf, tape->cur, bytes_read)) - ret = -EFAULT; - buf += bytes_read; - count -= bytes_read; - actually_read += bytes_read; - } - if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - temp = min((unsigned long)count, (unsigned long)bytes_read); - if (copy_to_user(buf, tape->cur, temp)) + + while (done < count) { + size_t todo; + + /* refill if staging buffer is empty */ + if (!tape->valid) { + /* If we are at a filemark, nothing more to read */ + if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) + break; + /* read */ + if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, + tape->buffer_size) <= 0) + break; + } + + /* copy out */ + todo = min_t(size_t, count - done, tape->valid); + if (copy_to_user(buf + done, tape->cur, todo)) ret = -EFAULT; - actually_read += temp; - tape->cur += temp; - tape->valid -= temp; + + tape->cur += todo; + tape->valid -= todo; + done += todo; } -finish: - if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { + + if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return ret ? ret : actually_read; + return ret ? ret : done; } static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, @@ -1248,7 +1218,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t actually_written = 0; + size_t done = 0; ssize_t ret = 0; int rc; @@ -1262,47 +1232,28 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid < tape->buffer_size) { - actually_written = min_t(unsigned int, - tape->buffer_size - tape->valid, - count); - if (copy_from_user(tape->cur, buf, actually_written)) - ret = -EFAULT; - buf += actually_written; - count -= actually_written; - tape->cur += actually_written; - tape->valid += actually_written; - - if (tape->valid == tape->buffer_size) { - ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - if (retval <= 0) - return (retval); - } - } - while (count >= tape->buffer_size) { - ssize_t retval; - if (copy_from_user(tape->cur, buf, tape->buffer_size)) - ret = -EFAULT; - buf += tape->buffer_size; - count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - actually_written += tape->buffer_size; - if (retval <= 0) - return (retval); - } - if (count) { - actually_written += count; - if (copy_from_user(tape->cur, buf, count)) + + while (done < count) { + size_t todo; + + /* flush if staging buffer is full */ + if (tape->valid == tape->buffer_size && + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + tape->buffer_size) <= 0) + return rc; + + /* copy in */ + todo = min_t(size_t, count - done, + tape->buffer_size - tape->valid); + if (copy_from_user(tape->cur, buf + done, todo)) ret = -EFAULT; - tape->cur += count; - tape->valid += count; + + tape->cur += todo; + tape->valid += todo; + done += todo; } - return ret ? ret : actually_written; + + return ret ? ret : done; } static int idetape_write_filemark(ide_drive_t *drive) -- cgit v1.2.3-18-g5258 From 6d7003877c2f0578f1c08f66d05c3f72ef4ae596 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-atapi: kill unused fields and callbacks Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 17 ++++------------- drivers/ide/ide-tape.c | 1 - 2 files changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index b9dd4503cbc..afe5a432387 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -359,11 +359,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; - } else { + } else pc->xferred = pc->req_xfer; - if (drive->pc_update_buffers) - drive->pc_update_buffers(drive, pc); - } debug_log("%s: DMA finished\n", drive->name); } @@ -463,16 +460,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - if (drive->media == ide_tape && pc->bh) - done = drive->pc_io_buffers(drive, pc, bcount, write); - else { - done = min_t(unsigned int, bcount, cmd->nleft); - ide_pio_bytes(drive, cmd, write, done); - } + done = min_t(unsigned int, bcount, cmd->nleft); + ide_pio_bytes(drive, cmd, write, done); - /* Update the current position */ + /* Update transferred byte count */ pc->xferred += done; - pc->cur_pos += done; bcount -= done; @@ -650,7 +642,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) /* We haven't transferred any data yet */ pc->xferred = 0; - pc->cur_pos = pc->buf; valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2599579e417..8dfc68892d6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -591,7 +591,6 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; -- cgit v1.2.3-18-g5258 From 2c316bb57ad4e9f0f3de2d7ef1ae85530c2a7e69 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide: drop rq->data handling from ide_map_sg() Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6e3094e2277..a0309ea661a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,11 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (!rq->bio) { - sg_init_one(sg, rq->data, rq->data_len); - cmd->sg_nents = 1; - } else - cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); + cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } EXPORT_SYMBOL_GPL(ide_map_sg); -- cgit v1.2.3-18-g5258 From e475eedb09ee9a0fd855f3e923aa9af31c17d141 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Apr 2009 10:50:04 +0000 Subject: clocksource: sh_cmt earlytimer support Add Early Platform Driver support to the sh_cmt driver using the earlytimer class. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 1c92c39a53a..02bae3994ab 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -566,9 +566,19 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) static int __devinit sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); + struct sh_cmt_config *cfg = pdev->dev.platform_data; int ret; - p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p) { + pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name); + return 0; + } + + if (is_early_platform_device(pdev)) + p = alloc_bootmem(sizeof(*p)); + else + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { dev_err(&pdev->dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -576,7 +586,10 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { - kfree(p); + if (is_early_platform_device(pdev)) + free_bootmem(__pa(p), sizeof(*p)); + else + kfree(p); platform_set_drvdata(pdev, NULL); } @@ -606,6 +619,7 @@ static void __exit sh_cmt_exit(void) platform_driver_unregister(&sh_cmt_device_driver); } +early_platform_init("earlytimer", &sh_cmt_device_driver); module_init(sh_cmt_init); module_exit(sh_cmt_exit); -- cgit v1.2.3-18-g5258 From 937582382c71b75b29fbb92615629494e1a05ac0 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:14 +0800 Subject: x86, intr-remap: enable interrupt remapping early Currently, when x2apic is not enabled, interrupt remapping will be enabled in init_dmars(), where it is too late to remap ioapic interrupts, that is, ioapic interrupts are really in compatibility mode, not remappable mode. This patch always enables interrupt remapping before ioapic setup, it guarantees all interrupts will be remapped when interrupt remapping is enabled. Thus it doesn't need to set the compatibility interrupt bit. [ Impact: refactor intr-remap init sequence, enable fuller remap mode ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- drivers/pci/intel-iommu.c | 9 --------- drivers/pci/intr_remapping.c | 28 ++++++++++++++-------------- 2 files changed, 14 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 001b328adf8..9ce8f0764be 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1968,15 +1968,6 @@ static int __init init_dmars(void) } } -#ifdef CONFIG_INTR_REMAP - if (!intr_remapping_enabled) { - ret = enable_intr_remapping(0); - if (ret) - printk(KERN_ERR - "IOMMU: enable interrupt remapping failed\n"); - } -#endif - /* * For each rmrr * for each dev attached to rmrr diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f5e0ea724a6..5c2142656e9 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -423,20 +423,6 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode) readl, (sts & DMA_GSTS_IRTPS), sts); spin_unlock_irqrestore(&iommu->register_lock, flags); - if (mode == 0) { - spin_lock_irqsave(&iommu->register_lock, flags); - - /* enable comaptiblity format interrupt pass through */ - cmd = iommu->gcmd | DMA_GCMD_CFI; - iommu->gcmd |= DMA_GCMD_CFI; - writel(cmd, iommu->reg + DMAR_GCMD_REG); - - IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, - readl, (sts & DMA_GSTS_CFIS), sts); - - spin_unlock_irqrestore(&iommu->register_lock, flags); - } - /* * global invalidation of interrupt entry cache before enabling * interrupt-remapping. @@ -516,6 +502,20 @@ end: spin_unlock_irqrestore(&iommu->register_lock, flags); } +int __init intr_remapping_supported(void) +{ + struct dmar_drhd_unit *drhd; + + for_each_drhd_unit(drhd) { + struct intel_iommu *iommu = drhd->iommu; + + if (!ecap_ir_support(iommu->ecap)) + return 0; + } + + return 1; +} + int __init enable_intr_remapping(int eim) { struct dmar_drhd_unit *drhd; -- cgit v1.2.3-18-g5258 From 03ea81550676296d94596e4337c771c6ba29f542 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:15 +0800 Subject: x86, intr-remap: add option to disable interrupt remapping Add option "nointremap" to disable interrupt remapping. [ Impact: add new boot option ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Acked-by: David Woodhouse Cc: iommu@lists.linux-foundation.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-5-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- drivers/pci/intr_remapping.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 5c2142656e9..842039e4955 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -15,6 +15,14 @@ static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; static int ir_ioapic_num; int intr_remapping_enabled; +static int disable_intremap; +static __init int setup_nointremap(char *str) +{ + disable_intremap = 1; + return 0; +} +early_param("nointremap", setup_nointremap); + struct irq_2_iommu { struct intel_iommu *iommu; u16 irte_index; @@ -506,6 +514,9 @@ int __init intr_remapping_supported(void) { struct dmar_drhd_unit *drhd; + if (disable_intremap) + return 0; + for_each_drhd_unit(drhd) { struct intel_iommu *iommu = drhd->iommu; -- cgit v1.2.3-18-g5258 From 2ecf0a57c60dcb588f310d94412118e15c510532 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2009 12:16:56 +0900 Subject: ide-dma: don't reset request fields on dma_timeout_retry() Impact: drop unnecessary code Now that everything uses bio and block operations, there is no need to reset request fields manually when retrying a request. Every field is guaranteed to be always valid. Drop unnecessary request field resetting from ide_dma_timeout_retry(). Signed-off-by: Tejun Heo --- drivers/ide/ide-dma.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index a0b8cab1d9a..d9123ecae4a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -510,23 +510,11 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) /* * un-busy drive etc and make sure request is sane */ - rq = hwif->rq; - if (!rq) - goto out; - - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: + if (rq) { + hwif->rq = NULL; + rq->errors = 0; + } return ret; } -- cgit v1.2.3-18-g5258 From 19bdc9d061bcb71efd2b53083d96b59bbe1a1751 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 17 Apr 2009 05:26:31 +0000 Subject: clocksource: sh_cmt clocksource support Add clocksource support to the sh_cmt driver. With this in place we can do tickless with a single CMT channel. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 66 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 02bae3994ab..c2475648961 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -47,6 +47,7 @@ struct sh_cmt_priv { unsigned long rate; spinlock_t lock; struct clock_event_device ced; + struct clocksource cs; unsigned long total_cycles; }; @@ -376,6 +377,68 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) spin_unlock_irqrestore(&p->lock, flags); } +static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs) +{ + return container_of(cs, struct sh_cmt_priv, cs); +} + +static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) +{ + struct sh_cmt_priv *p = cs_to_sh_cmt(cs); + unsigned long flags, raw; + unsigned long value; + int has_wrapped; + + spin_lock_irqsave(&p->lock, flags); + value = p->total_cycles; + raw = sh_cmt_get_counter(p, &has_wrapped); + + if (unlikely(has_wrapped)) + raw = p->match_value; + spin_unlock_irqrestore(&p->lock, flags); + + return value + raw; +} + +static int sh_cmt_clocksource_enable(struct clocksource *cs) +{ + struct sh_cmt_priv *p = cs_to_sh_cmt(cs); + int ret; + + p->total_cycles = 0; + + ret = sh_cmt_start(p, FLAG_CLOCKSOURCE); + if (ret) + return ret; + + /* TODO: calculate good shift from rate and counter bit width */ + cs->shift = 0; + cs->mult = clocksource_hz2mult(p->rate, cs->shift); + return 0; +} + +static void sh_cmt_clocksource_disable(struct clocksource *cs) +{ + sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE); +} + +static int sh_cmt_register_clocksource(struct sh_cmt_priv *p, + char *name, unsigned long rating) +{ + struct clocksource *cs = &p->cs; + + cs->name = name; + cs->rating = rating; + cs->read = sh_cmt_clocksource_read; + cs->enable = sh_cmt_clocksource_enable; + cs->disable = sh_cmt_clocksource_disable; + cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8); + cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + pr_info("sh_cmt: %s used as clock source\n", cs->name); + clocksource_register(cs); + return 0; +} + static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced) { return container_of(ced, struct sh_cmt_priv, ced); @@ -483,6 +546,9 @@ int sh_cmt_register(struct sh_cmt_priv *p, char *name, if (clockevent_rating) sh_cmt_register_clockevent(p, name, clockevent_rating); + if (clocksource_rating) + sh_cmt_register_clocksource(p, name, clocksource_rating); + return 0; } -- cgit v1.2.3-18-g5258 From 47c8a08bbe77ad3c06f63919a14b0f0b0cd54390 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Apr 2009 17:34:39 +0900 Subject: sh: rtc-generic support. This adds rtc-generic support for SUPERH32. Signed-off-by: Paul Mundt --- drivers/rtc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 4e9851fc174..277d35d232f 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -692,7 +692,7 @@ config RTC_DRV_GENERIC tristate "Generic RTC support" # Please consider writing a new RTC driver instead of using the generic # RTC abstraction - depends on PARISC || M68K || PPC + depends on PARISC || M68K || PPC || SUPERH32 help Say Y or M here to enable RTC support on systems using the generic RTC abstraction. If you do not know what you are doing, you should -- cgit v1.2.3-18-g5258 From ac2ff946a53e7bd0ae98f4e5d1d6c1b1dced82e5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 12:38:32 +0900 Subject: mg_disk: fix locking IRQ and timeout handlers call functions which expect locked queue lock without locking it. Fix it. While at it, convert 0s used as null pointer constant to NULLs. [ Impact: fix locking, cleanup ] Signed-off-by: Tejun Heo Cc: unsik Kim --- drivers/block/mg_disk.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index fb39d9aa3cd..d3e72ad08db 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -160,11 +160,16 @@ static irqreturn_t mg_irq(int irq, void *dev_id) struct mg_host *host = dev_id; void (*handler)(struct mg_host *) = host->mg_do_intr; - host->mg_do_intr = 0; + spin_lock(&host->lock); + + host->mg_do_intr = NULL; del_timer(&host->timer); if (!handler) handler = mg_unexpected_intr; handler(host); + + spin_unlock(&host->lock); + return IRQ_HANDLED; } @@ -319,7 +324,7 @@ static void mg_read(struct request *req) remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) != + if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) != MG_ERR_NONE) mg_bad_rw_intr(host); @@ -363,7 +368,7 @@ static void mg_write(struct request *req) remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) != + if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; @@ -521,9 +526,11 @@ void mg_times_out(unsigned long data) char *name; struct request *req; + spin_lock_irq(&host->lock); + req = elv_next_request(host->breq); if (!req) - return; + goto out_unlock; host->mg_do_intr = NULL; @@ -534,6 +541,8 @@ void mg_times_out(unsigned long data) mg_bad_rw_intr(host); mg_request(host->breq); +out_unlock: + spin_unlock_irq(&host->lock); } static void mg_request_poll(struct request_queue *q) -- cgit v1.2.3-18-g5258 From 7090a0a97f55cbf47547a140fcc5a349f32c598c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Apr 2009 12:38:33 +0900 Subject: mg_disk: fix CONFIG_LBD=y warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/block/mg_disk.c: In function ‘mg_dump_status’: drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘sector_t’ [ Impact: kill build warning ] Cc: unsik Kim Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo --- drivers/block/mg_disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index d3e72ad08db..f3898353d0a 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -79,7 +79,7 @@ static void mg_dump_status(const char *msg, unsigned int stat, if (host->breq) { req = elv_next_request(host->breq); if (req) - printk(", sector=%ld", req->sector); + printk(", sector=%u", (u32)req->sector); } } -- cgit v1.2.3-18-g5258 From e93b9fb7d85da4fd9d5171649e5ddcac1dd572bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 12:38:33 +0900 Subject: hd: fix locking hd dance around local irq and HD_IRQ enable without achieving much. It ends up transferring data from irq handler with both local irq and HD_IRQ disabled. The only place it actually does something is while transferring the first block of a request which it does with HD_IRQ disabled but local irq enabled. Unfortunately, the dancing is horribly broken from locking POV. IRQ and timeout handlers access block queue without grabbing the queue lock and running the driver in SMP configuration crashes the whole machine pretty quickly. Remove meaningless irq enable/disable dancing and add proper locking in issue, irq and timeout paths. Signed-off-by: Tejun Heo --- drivers/block/hd.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 3c11f062a18..baaa9e486e5 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -509,7 +509,6 @@ ok_to_write: if (i > 0) { SET_HANDLER(&write_intr); outsw(HD_DATA, req->buffer, 256); - local_irq_enable(); } else { #if (HD_DELAY > 0) last_req = read_timer(); @@ -541,8 +540,7 @@ static void hd_times_out(unsigned long dummy) if (!CURRENT) return; - disable_irq(HD_IRQ); - local_irq_enable(); + spin_lock_irq(hd_queue->queue_lock); reset = 1; name = CURRENT->rq_disk->disk_name; printk("%s: timeout\n", name); @@ -552,9 +550,8 @@ static void hd_times_out(unsigned long dummy) #endif end_request(CURRENT, 0); } - local_irq_disable(); hd_request(); - enable_irq(HD_IRQ); + spin_unlock_irq(hd_queue->queue_lock); } static int do_special_op(struct hd_i_struct *disk, struct request *req) @@ -592,7 +589,6 @@ static void hd_request(void) return; repeat: del_timer(&device_timer); - local_irq_enable(); req = CURRENT; if (!req) { @@ -601,7 +597,6 @@ repeat: } if (reset) { - local_irq_disable(); reset_hd(); return; } @@ -660,9 +655,7 @@ repeat: static void do_hd_request(struct request_queue *q) { - disable_irq(HD_IRQ); hd_request(); - enable_irq(HD_IRQ); } static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) @@ -684,12 +677,16 @@ static irqreturn_t hd_interrupt(int irq, void *dev_id) { void (*handler)(void) = do_hd; + spin_lock(hd_queue->queue_lock); + do_hd = NULL; del_timer(&device_timer); if (!handler) handler = unexpected_hd_interrupt; handler(); - local_irq_enable(); + + spin_unlock(hd_queue->queue_lock); + return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From e686307fdc84f249490e6c9da92fcb2424491f14 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 17 Apr 2009 08:41:21 +0200 Subject: loop: use BIO list management functions Now that the bio list management stuff is generic, convert loop to use bio lists instead of its own private bio list implementation. Cc: Jens Axboe Cc: Christoph Hellwig Signed-off-by: Akinobu Mita Signed-off-by: Jens Axboe --- drivers/block/loop.c | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index ddae8082589..9ca4bb01465 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -511,11 +511,7 @@ out: */ static void loop_add_bio(struct loop_device *lo, struct bio *bio) { - if (lo->lo_biotail) { - lo->lo_biotail->bi_next = bio; - lo->lo_biotail = bio; - } else - lo->lo_bio = lo->lo_biotail = bio; + bio_list_add(&lo->lo_bio_list, bio); } /* @@ -523,16 +519,7 @@ static void loop_add_bio(struct loop_device *lo, struct bio *bio) */ static struct bio *loop_get_bio(struct loop_device *lo) { - struct bio *bio; - - if ((bio = lo->lo_bio)) { - if (bio == lo->lo_biotail) - lo->lo_biotail = NULL; - lo->lo_bio = bio->bi_next; - bio->bi_next = NULL; - } - - return bio; + return bio_list_pop(&lo->lo_bio_list); } static int loop_make_request(struct request_queue *q, struct bio *old_bio) @@ -609,12 +596,13 @@ static int loop_thread(void *data) set_user_nice(current, -20); - while (!kthread_should_stop() || lo->lo_bio) { + while (!kthread_should_stop() || !bio_list_empty(&lo->lo_bio_list)) { wait_event_interruptible(lo->lo_event, - lo->lo_bio || kthread_should_stop()); + !bio_list_empty(&lo->lo_bio_list) || + kthread_should_stop()); - if (!lo->lo_bio) + if (bio_list_empty(&lo->lo_bio_list)) continue; spin_lock_irq(&lo->lo_lock); bio = loop_get_bio(lo); @@ -841,7 +829,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, lo->old_gfp_mask = mapping_gfp_mask(mapping); mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS)); - lo->lo_bio = lo->lo_biotail = NULL; + bio_list_init(&lo->lo_bio_list); /* * set queue make_request_fn, and add limits based on lower level -- cgit v1.2.3-18-g5258 From 0de57fb93b1daaeaecb658a98b3299ae460c02e9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580..3a53e0834cf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3-18-g5258 From 220d06b5531e7b8a6226b2fdfb21198c3ccc4f76 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: use blk_run_queue() instead of blk_start_queueing() blk_start_queueing() is being phased out in favor of [__]blk_run_queue(). Switch. Signed-off-by: Tejun Heo --- drivers/ide/ide-park.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c index 310d03f2b5b..a914023d6d0 100644 --- a/drivers/ide/ide-park.c +++ b/drivers/ide/ide-park.c @@ -24,11 +24,8 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout) start_queue = 1; spin_unlock_irq(&hwif->lock); - if (start_queue) { - spin_lock_irq(q->queue_lock); - blk_start_queueing(q); - spin_unlock_irq(q->queue_lock); - } + if (start_queue) + blk_run_queue(q); return; } spin_unlock_irq(&hwif->lock); -- cgit v1.2.3-18-g5258 From b2963ac1738542d30305d7e12c8c078a383a425c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide: don't set REQ_SOFTBARRIER ide doesn't have to worry about REQ_SOFTBARRIER. Don't set it. Signed-off-by: Tejun Heo --- drivers/ide/ide-disk.c | 1 - drivers/ide/ide-ioctls.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a9fbe2c3121..c2438804d3c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -411,7 +411,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) cmd->protocol = ATA_PROT_NODATA; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->cmd_flags |= REQ_SOFTBARRIER; rq->special = cmd; } diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index c1c25ebbaa1..5991b23793f 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -231,7 +231,6 @@ static int generic_drive_reset(ide_drive_t *drive) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; - rq->cmd_flags |= REQ_SOFTBARRIER; if (blk_execute_rq(drive->queue, NULL, rq, 1)) ret = rq->errors; blk_put_request(rq); -- cgit v1.2.3-18-g5258 From 59a4f6f355fc718581ddcf1bb45a469d4756c035 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-cd: clear sense buffer before issuing request sense Impact: code simplification ide_cd_request_sense_fixup() clears the tail of the sense buffer if the device didn't completely fill it. This patch makes cdrom_queue_request_sense() clear the sense buffer before issuing the command instead of clearing it afterwards. This simplifies code and eases future changes. Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3d4e0996976..b6a0d126b57 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -217,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, if (sense == NULL) sense = &info->sense_data; + memset(sense, 0, 18); + /* stuff the sense request in front of our current request */ blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; @@ -504,14 +506,8 @@ static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct ide_cmd *cmd) * and some drives don't send them. Sigh. */ if (rq->cmd[0] == GPCMD_REQUEST_SENSE && - cmd->nleft > 0 && cmd->nleft <= 5) { - unsigned int ofs = cmd->nbytes - cmd->nleft; - - while (cmd->nleft > 0) { - *((u8 *)rq->data + ofs++) = 0; - cmd->nleft--; - } - } + cmd->nleft > 0 && cmd->nleft <= 5) + cmd->nleft = 0; } int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, -- cgit v1.2.3-18-g5258 From 8968932e54db35cf9d69cfbbd50c26dfaaa586c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-floppy: block pc always uses bio Impact: remove unnecessary code path Block pc requests always use bio and rq->data is always NULL. No need to worry about !rq->bio cases in idefloppy_block_pc_cmd(). Note that ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg fine. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-floppy.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2b4868d95f8..3b22e066287 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -216,15 +216,13 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len && rq_data_dir(rq) == WRITE) - pc->flags |= PC_FLAG_WRITING; - pc->buf = rq->data; - if (rq->bio) + if (rq->data_len) { pc->flags |= PC_FLAG_DMA_OK; - /* - * possibly problematic, doesn't look like ide-floppy correctly - * handled scattered requests if dma fails... - */ + if (rq_data_dir(rq) == WRITE) + pc->flags |= PC_FLAG_WRITING; + } + /* pio will be performed by ide_pio_bytes() which handles sg fine */ + pc->buf = NULL; pc->req_xfer = pc->buf_size = rq->data_len; } -- cgit v1.2.3-18-g5258 From d868ca24302e99a0e8a86071ca2c66273edf97d9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-taskfile: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide_raw_taskfile() directly uses rq->buffer to carry pointer to the data buffer. This complicates both block interface and ide backend request handling. Use blk_rq_map_kern() instead and drop special handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg(). Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it to initialize bio rw flag. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 5 +---- drivers/ide/ide-taskfile.c | 18 +++++++++++------- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c..9b9e8b1aae5 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,10 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE); - cmd->sg_nents = 1; - } else if (!rq->bio) { + if (!rq->bio) { sg_init_one(sg, rq->data, rq->data_len); cmd->sg_nents = 1; } else diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4aa6223c11b..f400eb4d4af 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -424,7 +424,9 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_ATA_TASKFILE; - rq->buffer = buf; + + if (cmd->tf_flags & IDE_TFLAG_WRITE) + rq->cmd_flags |= REQ_RW; /* * (ks) We transfer currently only whole sectors. @@ -432,18 +434,20 @@ int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq->hard_nr_sectors = rq->nr_sectors = nsect; - rq->hard_cur_sectors = rq->current_nr_sectors = nsect; - - if (cmd->tf_flags & IDE_TFLAG_WRITE) - rq->cmd_flags |= REQ_RW; + if (nsect) { + error = blk_rq_map_kern(drive->queue, rq, buf, + nsect * SECTOR_SIZE, __GFP_WAIT); + if (error) + goto put_req; + } rq->special = cmd; cmd->rq = rq; error = blk_execute_rq(drive->queue, NULL, rq, 0); - blk_put_request(rq); +put_req: + blk_put_request(rq); return error; } -- cgit v1.2.3-18-g5258 From ac0b0113ddbab3ed2388132d368c97292f9f3c84 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 7201b176d75..2894577237b 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -90,7 +90,7 @@ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; - rq->buffer = (char *)pc; + rq->special = (char *)pc; rq->rq_disk = disk; if (pc->req_xfer) { @@ -119,7 +119,7 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; - rq->buffer = (char *)pc; + rq->special = (char *)pc; if (pc->req_xfer) { rq->data = pc->buf; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3b22e066287..94600331a27 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -264,7 +264,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); } else if (blk_special_request(rq)) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; idefloppy_blockpc_cmd(floppy, pc, rq); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3a53e0834cf..aadf53cfac6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -828,7 +828,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } if (rq->cmd[13] & REQ_IDETAPE_PC1) { - pc = (struct ide_atapi_pc *) rq->buffer; + pc = (struct ide_atapi_pc *)rq->special; rq->cmd[13] &= ~(REQ_IDETAPE_PC1); rq->cmd[13] |= REQ_IDETAPE_PC2; goto out; -- cgit v1.2.3-18-g5258 From 1f181d2b1569dfb88a584a6e1847e9e1c7645951 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: don't abuse rq->buffer Impact: rq->buffer usage cleanup ide-cd uses rq->buffer to carry pointer to the original request when issuing REQUEST_SENSE. Use rq->special instead. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b6a0d126b57..bb77c79c101 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -232,8 +232,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; - /* NOTE! Save the failed command in "rq->buffer" */ - rq->buffer = (void *) failed_command; + /* NOTE! Save the failed command in "rq->special" */ + rq->special = (void *)failed_command; if (failed_command) ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", @@ -247,10 +247,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* - * For REQ_TYPE_SENSE, "rq->buffer" points to the original + * For REQ_TYPE_SENSE, "rq->special" points to the original * failed request */ - struct request *failed = (struct request *)rq->buffer; + struct request *failed = (struct request *)rq->special; struct cdrom_info *info = drive->driver_data; void *sense = &info->sense_data; -- cgit v1.2.3-18-g5258 From e69d800f7e8797a8e3423380ee9d8ca1cb90c388 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide: add helpers for preparing sense requests This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2894577237b..c6e03485a63 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -191,6 +191,67 @@ void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); +void ide_prep_sense(ide_drive_t *drive, struct request *rq) +{ + struct request_sense *sense = &drive->sense_data; + struct request *sense_rq = &drive->sense_rq; + unsigned int cmd_len, sense_len; + + debug_log("%s: enter\n", __func__); + + switch (drive->media) { + case ide_floppy: + cmd_len = 255; + sense_len = 18; + break; + case ide_tape: + cmd_len = 20; + sense_len = 20; + break; + default: + cmd_len = 18; + sense_len = 18; + } + + BUG_ON(sense_len > sizeof(*sense)); + + if (blk_sense_request(rq) || drive->sense_rq_armed) + return; + + memset(sense, 0, sizeof(*sense)); + + blk_rq_init(rq->q, sense_rq); + sense_rq->rq_disk = rq->rq_disk; + + sense_rq->data = sense; + sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; + sense_rq->cmd[4] = cmd_len; + sense_rq->data_len = sense_len; + + sense_rq->cmd_type = REQ_TYPE_SENSE; + sense_rq->cmd_flags |= REQ_PREEMPT; + + if (drive->media == ide_tape) + sense_rq->cmd[13] = REQ_IDETAPE_PC1; + + drive->sense_rq_armed = true; +} +EXPORT_SYMBOL_GPL(ide_prep_sense); + +void ide_queue_sense_rq(ide_drive_t *drive, void *special) +{ + BUG_ON(!drive->sense_rq_armed); + + drive->sense_rq.special = special; + drive->sense_rq_armed = false; + + drive->hwif->rq = NULL; + + elv_add_request(drive->queue, &drive->sense_rq, + ELEVATOR_INSERT_FRONT, 0); +} +EXPORT_SYMBOL_GPL(ide_queue_sense_rq); + /* * Called when an error was detected during the last packet command. * We queue a request sense packet command in the head of the request list. -- cgit v1.2.3-18-g5258 From c457ce874a0f3dfa3d5e9f2309789f6f34e24325 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd: convert to using generic sense request Preallocate a sense request in the ->do_request method and reinitialize it only on demand, in case it's been consumed in the IRQ handler path. The reason for this is that we don't want to be mapping rq to bio in the IRQ path and introduce all kinds of unnecessary hacks to the block layer. tj: * Both user and kernel PC requests expect sense data to be stored in separate storage other than drive->sense_data. Copy sense data to rq->sense on completion if rq->sense is not NULL. This fixes bogus sense data on PC requests. As a result, remove cdrom_queue_request_sense. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-cd.c | 54 ++++++++++++---------------------------------------- drivers/ide/ide-cd.h | 4 ---- 2 files changed, 12 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index bb77c79c101..061d7bbcd34 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -206,44 +206,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, - struct request *failed_command) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = &drive->request_sense_rq; - - ide_debug_log(IDE_DBG_SENSE, "enter"); - - if (sense == NULL) - sense = &info->sense_data; - - memset(sense, 0, 18); - - /* stuff the sense request in front of our current request */ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = info->disk; - - rq->data = sense; - rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = 18; - rq->data_len = 18; - - rq->cmd_type = REQ_TYPE_SENSE; - rq->cmd_flags |= REQ_PREEMPT; - - /* NOTE! Save the failed command in "rq->special" */ - rq->special = (void *)failed_command; - - if (failed_command) - ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x", - failed_command->cmd[0]); - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* @@ -251,11 +213,16 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) * failed request */ struct request *failed = (struct request *)rq->special; - struct cdrom_info *info = drive->driver_data; - void *sense = &info->sense_data; + struct request_sense *sense = &drive->sense_data; if (failed) { if (failed->sense) { + /* + * Sense is always read into drive->sense_data. + * Copy back if the failed request has its + * sense pointer set. + */ + memcpy(failed->sense, sense, 18); sense = failed->sense; failed->sense_len = rq->sense_len; } @@ -431,7 +398,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - cdrom_queue_request_sense(drive, NULL, NULL); + ide_queue_sense_rq(drive, NULL); return 1; end_request: @@ -445,7 +412,7 @@ end_request: hwif->rq = NULL; - cdrom_queue_request_sense(drive, rq->sense, rq); + ide_queue_sense_rq(drive, rq); return 1; } else return 2; @@ -893,6 +860,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, goto out_end; } + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 1d97101099c..93a3cf1b0f3 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -87,10 +87,6 @@ struct cdrom_info { struct atapi_toc *toc; - /* The result of the last successful request sense command - on this device. */ - struct request_sense sense_data; - u8 max_speed; /* Max speed of the drive. */ u8 current_speed; /* Current speed of the drive. */ -- cgit v1.2.3-18-g5258 From 068753203e6cd085664a62e0fc0636e19b148a12 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz CC: FUJITA Tomonori Signed-off-by: Borislav Petkov Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 48 ++++++++++++++---------------------------------- drivers/ide/ide-floppy.c | 4 +++- drivers/ide/ide-tape.c | 7 +++++-- 3 files changed, 22 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index c6e03485a63..972c522516f 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -79,34 +79,6 @@ void ide_init_pc(struct ide_atapi_pc *pc) } EXPORT_SYMBOL_GPL(ide_init_pc); -/* - * Generate a new packet command request in front of the request queue, before - * the current request, so that it will be processed immediately, on the next - * pass through the driver. - */ -static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, - struct ide_atapi_pc *pc, struct request *rq) -{ - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_SPECIAL; - rq->cmd_flags |= REQ_PREEMPT; - rq->special = (char *)pc; - rq->rq_disk = disk; - - if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; - } - - memcpy(rq->cmd, pc->c, 12); - if (drive->media == ide_tape) - rq->cmd[13] = REQ_IDETAPE_PC1; - - drive->hwif->rq = NULL; - - elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); -} - /* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. @@ -254,18 +226,26 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); /* * Called when an error was detected during the last packet command. - * We queue a request sense packet command in the head of the request list. + * We queue a request sense packet command at the head of the request + * queue. */ -void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) +void ide_retry_pc(ide_drive_t *drive) { - struct request *rq = &drive->request_sense_rq; + struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); - ide_create_request_sense_cmd(drive, pc); + + /* init pc from sense_rq */ + ide_init_pc(pc); + memcpy(pc->c, sense_rq->cmd, 12); + pc->buf = sense_rq->data; + pc->req_xfer = sense_rq->data_len; + if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_pc_head(drive, disk, pc, rq); + + ide_queue_sense_rq(drive, pc); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -404,7 +384,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ - ide_retry_pc(drive, rq->rq_disk); + ide_retry_pc(drive); /* queued, but not started */ return ide_stopped; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 94600331a27..d3302cc891e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -263,7 +263,7 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, } pc = &floppy->queued_pc; idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block); - } else if (blk_special_request(rq)) { + } else if (blk_special_request(rq) || blk_sense_request(rq)) { pc = (struct ide_atapi_pc *)rq->special; } else if (blk_pc_request(rq)) { pc = &floppy->queued_pc; @@ -273,6 +273,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index aadf53cfac6..8324dfa78a3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -695,7 +695,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - ide_retry_pc(drive, tape->disk); + ide_retry_pc(drive); return ide_stopped; } pc->error = 0; @@ -752,7 +752,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, (unsigned long long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); - if (!blk_special_request(rq)) { + if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); @@ -840,6 +840,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, BUG(); out: + /* prepare sense request for this command */ + ide_prep_sense(drive, rq); + memset(&cmd, 0, sizeof(cmd)); if (rq_data_dir(rq)) -- cgit v1.2.3-18-g5258 From 02e7cf8f848841ca21864ccd019e480b73c323b7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:42 +0900 Subject: ide-cd,atapi: use bio for internal commands Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 52 +++++++++++++++++++++++++++++-------------------- drivers/ide/ide-cd.c | 28 +++++++++++++------------- drivers/ide/ide-io.c | 3 +++ drivers/ide/ide-tape.c | 3 +++ 4 files changed, 51 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 972c522516f..5cefe12f562 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -94,16 +94,18 @@ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, rq->special = (char *)pc; if (pc->req_xfer) { - rq->data = pc->buf; - rq->data_len = pc->req_xfer; + error = blk_rq_map_kern(drive->queue, rq, pc->buf, pc->req_xfer, + GFP_NOIO); + if (error) + goto put_req; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); +put_req: blk_put_request(rq); - return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); @@ -168,6 +170,7 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) struct request_sense *sense = &drive->sense_data; struct request *sense_rq = &drive->sense_rq; unsigned int cmd_len, sense_len; + int err; debug_log("%s: enter\n", __func__); @@ -193,13 +196,19 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) memset(sense, 0, sizeof(*sense)); blk_rq_init(rq->q, sense_rq); - sense_rq->rq_disk = rq->rq_disk; - sense_rq->data = sense; + err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, + GFP_NOIO); + if (unlikely(err)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: failed to map sense buffer\n", + drive->name); + return; + } + + sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; sense_rq->cmd[4] = cmd_len; - sense_rq->data_len = sense_len; - sense_rq->cmd_type = REQ_TYPE_SENSE; sense_rq->cmd_flags |= REQ_PREEMPT; @@ -210,9 +219,14 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) } EXPORT_SYMBOL_GPL(ide_prep_sense); -void ide_queue_sense_rq(ide_drive_t *drive, void *special) +int ide_queue_sense_rq(ide_drive_t *drive, void *special) { - BUG_ON(!drive->sense_rq_armed); + /* deferred failure from ide_prep_sense() */ + if (!drive->sense_rq_armed) { + printk(KERN_WARNING "%s: failed queue sense request\n", + drive->name); + return -ENOMEM; + } drive->sense_rq.special = special; drive->sense_rq_armed = false; @@ -221,6 +235,7 @@ void ide_queue_sense_rq(ide_drive_t *drive, void *special) elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT, 0); + return 0; } EXPORT_SYMBOL_GPL(ide_queue_sense_rq); @@ -239,13 +254,14 @@ void ide_retry_pc(ide_drive_t *drive) /* init pc from sense_rq */ ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); - pc->buf = sense_rq->data; + pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ pc->req_xfer = sense_rq->data_len; if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - ide_queue_sense_rq(drive, pc); + if (ide_queue_sense_rq(drive, pc)) + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); } EXPORT_SYMBOL_GPL(ide_retry_pc); @@ -317,7 +333,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) struct ide_cmd *cmd = &hwif->cmd; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; - xfer_func_t *xferfunc; unsigned int timeout, done; u16 bcount; u8 stat, ireason, dsc = 0; @@ -411,7 +426,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape) + if (drive->media == ide_tape && !rq->bio) done = ide_rq_bytes(rq); /* FIXME */ else done = blk_rq_bytes(rq); @@ -448,16 +463,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - xferfunc = write ? tp_ops->output_data : tp_ops->input_data; - - if (drive->media == ide_floppy && pc->buf == NULL) { + if (drive->media == ide_tape && pc->bh) + done = drive->pc_io_buffers(drive, pc, bcount, write); + else { done = min_t(unsigned int, bcount, cmd->nleft); ide_pio_bytes(drive, cmd, write, done); - } else if (drive->media == ide_tape && pc->bh) { - done = drive->pc_io_buffers(drive, pc, bcount, write); - } else { - done = min_t(unsigned int, bcount, pc->req_xfer - pc->xferred); - xferfunc(drive, NULL, pc->cur_pos, done); } /* Update the current position */ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 061d7bbcd34..673628790f1 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -210,10 +210,12 @@ static void ide_cd_complete_failed_rq(ide_drive_t *drive, struct request *rq) { /* * For REQ_TYPE_SENSE, "rq->special" points to the original - * failed request + * failed request. Also, the sense data should be read + * directly from rq which might be different from the original + * sense buffer if it got copied during mapping. */ struct request *failed = (struct request *)rq->special; - struct request_sense *sense = &drive->sense_data; + void *sense = bio_data(rq->bio); if (failed) { if (failed->sense) { @@ -398,7 +400,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) /* if we got a CHECK_CONDITION status, queue a request sense command */ if (stat & ATA_ERR) - ide_queue_sense_rq(drive, NULL); + return ide_queue_sense_rq(drive, NULL) ? 2 : 1; return 1; end_request: @@ -412,8 +414,7 @@ end_request: hwif->rq = NULL; - ide_queue_sense_rq(drive, rq); - return 1; + return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; } @@ -507,8 +508,12 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, rq->cmd_flags |= cmd_flags; rq->timeout = timeout; if (buffer) { - rq->data = buffer; - rq->data_len = *bufflen; + error = blk_rq_map_kern(drive->queue, rq, buffer, + *bufflen, GFP_NOIO); + if (error) { + blk_put_request(rq); + return error; + } } error = blk_execute_rq(drive->queue, info->disk, rq, 0); @@ -802,15 +807,10 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) drive->dma = 0; /* sg request */ - if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + if (rq->bio) { struct request_queue *q = drive->queue; + char *buf = bio_data(rq->bio); unsigned int alignment; - char *buf; - - if (rq->bio) - buf = bio_data(rq->bio); - else - buf = rq->data; drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9b9e8b1aae5..3245c2dbda3 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -481,6 +481,9 @@ void do_ide_request(struct request_queue *q) spin_unlock_irq(q->queue_lock); + /* HLD do_request() callback might sleep, make sure it's okay */ + might_sleep(); + if (ide_lock_host(host, hwif)) goto plug_device_2; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8324dfa78a3..9b762a2d5d9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -850,6 +850,9 @@ out: cmd.rq = rq; + ide_init_sg_cmd(&cmd, pc->req_xfer); + ide_map_sg(drive, &cmd); + return ide_tape_issue_pc(drive, &cmd, pc); } -- cgit v1.2.3-18-g5258 From 765139ef5f1a4b1d5cb1f1a7a12de7ee61f6500f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:43 +0900 Subject: ide-pm: don't abuse rq->data Impact: cleanup rq->data usage ide-pm uses rq->data to carry pointer to struct request_pm_state through request queue and rq->special is used to carray pointer to local struct ide_cmd, which isn't necessary. Use rq->special for request_pm_state instead and use local ide_cmd in ide_start_power_step(). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-pm.c | 38 +++++++++++++++----------------------- 2 files changed, 16 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 3245c2dbda3..6e3094e2277 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -368,7 +368,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", drive->name, pm->pm_step); diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 0d8a151c0a0..ba1488bd843 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -7,7 +7,6 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int ret; /* call ACPI _GTM only once */ @@ -15,11 +14,9 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) ide_acpi_get_timing(hwif); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_SUSPEND; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_SUSPEND; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; @@ -41,7 +38,6 @@ int generic_ide_resume(struct device *dev) ide_hwif_t *hwif = drive->hwif; struct request *rq; struct request_pm_state rqpm; - struct ide_cmd cmd; int err; /* call ACPI _PS0 / _STM only once */ @@ -53,12 +49,10 @@ int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); memset(&rqpm, 0, sizeof(rqpm)); - memset(&cmd, 0, sizeof(cmd)); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_PM_RESUME; rq->cmd_flags |= REQ_PREEMPT; - rq->special = &cmd; - rq->data = &rqpm; + rq->special = &rqpm; rqpm.pm_step = IDE_PM_START_RESUME; rqpm.pm_state = PM_EVENT_ON; @@ -77,7 +71,7 @@ int generic_ide_resume(struct device *dev) void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; #ifdef DEBUG_PM printk(KERN_INFO "%s: complete_power_step(step: %d)\n", @@ -107,10 +101,8 @@ void ide_complete_power_step(ide_drive_t *drive, struct request *rq) ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; - struct ide_cmd *cmd = rq->special; - - memset(cmd, 0, sizeof(*cmd)); + struct request_pm_state *pm = rq->special; + struct ide_cmd cmd = { }; switch (pm->pm_step) { case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */ @@ -123,12 +115,12 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) - cmd->tf.command = ATA_CMD_FLUSH_EXT; + cmd.tf.command = ATA_CMD_FLUSH_EXT; else - cmd->tf.command = ATA_CMD_FLUSH; + cmd.tf.command = ATA_CMD_FLUSH; goto out_do_tf; case IDE_PM_STANDBY: /* Suspend step 2 (standby) */ - cmd->tf.command = ATA_CMD_STANDBYNOW1; + cmd.tf.command = ATA_CMD_STANDBYNOW1; goto out_do_tf; case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -141,7 +133,7 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ - cmd->tf.command = ATA_CMD_IDLEIMMEDIATE; + cmd.tf.command = ATA_CMD_IDLEIMMEDIATE; goto out_do_tf; case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */ /* @@ -163,11 +155,11 @@ ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq) return ide_stopped; out_do_tf: - cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; - cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; - cmd->protocol = ATA_PROT_NODATA; + cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE; + cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE; + cmd.protocol = ATA_PROT_NODATA; - return do_rw_taskfile(drive, cmd); + return do_rw_taskfile(drive, &cmd); } /** @@ -181,7 +173,7 @@ out_do_tf: void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; unsigned long flags; ide_complete_power_step(drive, rq); @@ -207,7 +199,7 @@ void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq) void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { - struct request_pm_state *pm = rq->data; + struct request_pm_state *pm = rq->special; if (blk_pm_suspend_request(rq) && pm->pm_step == IDE_PM_START_SUSPEND) -- cgit v1.2.3-18-g5258 From 08f370f0a2fb223bf48d0bfa2a173be0393c19dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape,floppy: fix failed command completion after request sense Impact: fix infinite retry loop After a command failed, ide-tape and floppy inserts REQUEST_SENSE in front of the failed command and according to the result, sets pc->retries, flags and errors. After REQUEST_SENSE is complete, the failed command is again at the front of the queue and if the verdict was to terminate the request, the issue functions tries to complete it directly by calling drive->pc_callback() and returning ide_stopped. However, drive->pc_callback() doesn't complete a request. It only prepares for completion of the request. As a result, this creates an infinite loop where the failed request is retried perpetually. Fix it by actually ending the request by calling ide_complete_rq(). Signed-off-by: Tejun Heo --- drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-tape.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d3302cc891e..d20704ac318 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -141,6 +141,7 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 9b762a2d5d9..2b9a13671c5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -643,6 +643,7 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, } drive->failed_pc = NULL; drive->pc_callback(drive, 0); + ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From eb6a61bb9543aa54d62595e27206b3d3c0293bcc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 16 ++++++++++------ drivers/ide/ide-floppy.c | 5 ++++- drivers/ide/ide-tape.c | 5 ++++- 3 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 5cefe12f562..3df5442de71 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -409,6 +409,16 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; + /* + * ->pc_callback() might change rq->data_len for + * residual count, cache total length. + */ + if (!blk_special_request(rq) && + (drive->media == ide_tape && !rq->bio)) + done = ide_rq_bytes(rq); /* FIXME */ + else + done = blk_rq_bytes(rq); + /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -417,7 +427,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if (blk_special_request(rq)) { rq->errors = 0; - done = blk_rq_bytes(rq); error = 0; } else { @@ -426,11 +435,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) rq->errors = -EIO; } - if (drive->media == ide_tape && !rq->bio) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); - error = uptodate ? 0 : -EIO; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d20704ac318..537b7c55803 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -134,14 +134,17 @@ static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive, drive->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); + /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2b9a13671c5..8226d52504d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -622,6 +622,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, if (pc->retries > IDETAPE_MAX_PC_RETRIES || (pc->flags & PC_FLAG_ABORT)) { + unsigned int done = blk_rq_bytes(drive->hwif->rq); + /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the @@ -641,9 +643,10 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, /* Giving up */ pc->error = IDE_DRV_ERROR_GENERAL; } + drive->failed_pc = NULL; drive->pc_callback(drive, 0); - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + ide_complete_rq(drive, -EIO, done); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); -- cgit v1.2.3-18-g5258 From 7b13354eeaabaf6283b8c669a7d67d104ce7c638 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use single continuous buffer Impact: simpler buffer allocation and handling, kills OOM, fix DMA transfers ide-tape has its own multiple buffer mechanism using struct idetape_bh. It allocates buffer with decreasing order-of-two allocations so that it results in minimum number of segments. However, the implementation is quite complex and works in a way that no other block or ide driver works necessitating a lot of special case handling. The benefit this complex allocation scheme brings is questionable as PIO or DMA the number of segments (16 maximum) doesn't make any noticeable difference and it also doesn't negate the need for multiple order allocation which can fail under memory pressure or high fragmentation although it does lower the highest order necessary by one when the buffer size isn't power of two. As the first step to remove the custom buffer management, this patch makes ide-tape allocate single continous buffer. The maximum order is four. I doubt the change would cause any trouble but if it ever matters, it should be converted to regular sg mechanism like everyone else and even in that case dropping custom buffer handling and moving to standard mechanism first make sense as an intermediate step. This patch makes the first bh to contain the whole buffer and drops multi bh handling code. Following patches will make further changes. This patch has the side effect of killing OOM triggered by allocation path and fixing DMA transfers. Previously, bug in alloc path triggered OOM on command issue and commands were passed to DMA engine without DMA-mapping all the segments. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 256 +++++++++++-------------------------------------- 1 file changed, 58 insertions(+), 198 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8226d52504d..b2afbc7bcb6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -134,7 +134,6 @@ enum { struct idetape_bh { u32 b_size; atomic_t b_count; - struct idetape_bh *b_reqnext; char *b_data; }; @@ -228,10 +227,6 @@ typedef struct ide_tape_obj { char *b_data; int b_count; - int pages_per_buffer; - /* Wasted space in each stage */ - int excess_bh_size; - /* Measures average tape speed */ unsigned long avg_time; int avg_size; @@ -303,9 +298,7 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min( (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); @@ -313,15 +306,10 @@ static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + if (atomic_read(&bh->b_count) == bh->b_size) + pc->bh = NULL; } - pc->bh = bh; - return bcount; } @@ -331,22 +319,14 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, struct idetape_bh *bh = pc->bh; int count; - while (bcount) { - if (bh == NULL) - break; + if (bcount && bh) { count = min((unsigned int)pc->b_count, (unsigned int)bcount); drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); bcount -= count; pc->b_data += count; pc->b_count -= count; - if (!pc->b_count) { - bh = bh->b_reqnext; - pc->bh = bh; - if (bh) { - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - } - } + if (!pc->b_count) + pc->bh = NULL; } return bcount; @@ -355,24 +335,20 @@ static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; - int count; unsigned int bcount = pc->xferred; if (pc->flags & PC_FLAG_WRITING) return; - while (bcount) { - if (bh == NULL) { + if (bcount) { + if (bh == NULL || bcount > bh->b_size) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return; } - count = min((unsigned int)bh->b_size, (unsigned int)bcount); - atomic_set(&bh->b_count, count); + atomic_set(&bh->b_count, bcount); if (atomic_read(&bh->b_count) == bh->b_size) - bh = bh->b_reqnext; - bcount -= count; + pc->bh = NULL; } - pc->bh = bh; } /* @@ -439,24 +415,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* Free data buffers completely. */ static void ide_tape_kfree_buffer(idetape_tape_t *tape) { - struct idetape_bh *prev_bh, *bh = tape->merge_bh; - - while (bh) { - u32 size = bh->b_size; - - while (size) { - unsigned int order = fls(size >> PAGE_SHIFT)-1; - - if (bh->b_data) - free_pages((unsigned long)bh->b_data, order); + struct idetape_bh *bh = tape->merge_bh; - size &= (order-1); - bh->b_data += (1 << order) * PAGE_SIZE; - } - prev_bh = bh; - bh = bh->b_reqnext; - kfree(prev_bh); - } + kfree(bh->b_data); + kfree(bh); } static void ide_tape_handle_dsc(ide_drive_t *); @@ -861,117 +823,50 @@ out: } /* - * The function below uses __get_free_pages to allocate a data buffer of size - * tape->buffer_size (or a bit more). We attempt to combine sequential pages as - * much as possible. - * - * It returns a pointer to the newly allocated buffer, or NULL in case of - * failure. + * It returns a pointer to the newly allocated buffer, or NULL in case + * of failure. */ static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full, int clear) -{ - struct idetape_bh *prev_bh, *bh, *merge_bh; - int pages = tape->pages_per_buffer; - unsigned int order, b_allocd; - char *b_data = NULL; - - merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - bh = merge_bh; - if (bh == NULL) - goto abort; - - order = fls(pages) - 1; - bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!bh->b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - pages &= (order-1); - - if (clear) - memset(bh->b_data, 0, b_allocd); - bh->b_reqnext = NULL; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); + int full) +{ + struct idetape_bh *bh; - while (pages) { - order = fls(pages) - 1; - b_data = (char *) __get_free_pages(GFP_KERNEL, order); - if (!b_data) - goto abort; - b_allocd = (1 << order) * PAGE_SIZE; - - if (clear) - memset(b_data, 0, b_allocd); - - /* newly allocated page frames below buffer header or ...*/ - if (bh->b_data == b_data + b_allocd) { - bh->b_size += b_allocd; - bh->b_data -= b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - /* they are above the header */ - if (b_data == bh->b_data + bh->b_size) { - bh->b_size += b_allocd; - if (full) - atomic_add(b_allocd, &bh->b_count); - continue; - } - prev_bh = bh; - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) { - free_pages((unsigned long) b_data, order); - goto abort; - } - bh->b_reqnext = NULL; - bh->b_data = b_data; - bh->b_size = b_allocd; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - prev_bh->b_reqnext = bh; + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) + return NULL; - pages &= (order-1); + bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!bh->b_data) { + kfree(bh); + return NULL; } - bh->b_size -= tape->excess_bh_size; - if (full) - atomic_sub(tape->excess_bh_size, &bh->b_count); - return merge_bh; -abort: - ide_tape_kfree_buffer(tape); - return NULL; + bh->b_size = tape->buffer_size; + atomic_set(&bh->b_count, full ? bh->b_size : 0); + + return bh; } static int idetape_copy_stage_from_user(idetape_tape_t *tape, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min((unsigned int) - (bh->b_size - atomic_read(&bh->b_count)), - (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - count)) + n)) ret = 1; - n -= count; - atomic_add(count, &bh->b_count); - buf += count; - if (atomic_read(&bh->b_count) == bh->b_size) { - bh = bh->b_reqnext; - if (bh) - atomic_set(&bh->b_count, 0); - } + atomic_add(n, &bh->b_count); + if (atomic_read(&bh->b_count) == bh->b_size) + tape->bh = NULL; } - tape->bh = bh; + return ret; } @@ -979,30 +874,20 @@ static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, int n) { struct idetape_bh *bh = tape->bh; - int count; int ret = 0; - while (n) { - if (bh == NULL) { + if (n) { + if (bh == NULL || n > tape->b_count) { printk(KERN_ERR "ide-tape: bh == NULL in %s\n", __func__); return 1; } - count = min(tape->b_count, n); - if (copy_to_user(buf, tape->b_data, count)) + if (copy_to_user(buf, tape->b_data, n)) ret = 1; - n -= count; - tape->b_data += count; - tape->b_count -= count; - buf += count; - if (!tape->b_count) { - bh = bh->b_reqnext; - tape->bh = bh; - if (bh) { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } - } + tape->b_data += n; + tape->b_count -= n; + if (!tape->b_count) + tape->bh = NULL; } return ret; } @@ -1254,7 +1139,7 @@ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks, min; + int blocks; struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { @@ -1269,31 +1154,16 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) if (tape->merge_bh_size) { blocks = tape->merge_bh_size / tape->blk_size; if (tape->merge_bh_size % tape->blk_size) { - unsigned int i; - + unsigned int i = tape->blk_size - + tape->merge_bh_size % tape->blk_size; blocks++; - i = tape->blk_size - tape->merge_bh_size % - tape->blk_size; - bh = tape->bh->b_reqnext; - while (bh) { - atomic_set(&bh->b_count, 0); - bh = bh->b_reqnext; - } bh = tape->bh; - while (i) { - if (bh == NULL) { - printk(KERN_INFO "ide-tape: bug," - " bh NULL\n"); - break; - } - min = min(i, (unsigned int)(bh->b_size - - atomic_read(&bh->b_count))); + if (bh) { memset(bh->b_data + atomic_read(&bh->b_count), - 0, min); - atomic_add(min, &bh->b_count); - i -= min; - bh = bh->b_reqnext; - } + 0, i); + atomic_add(i, &bh->b_count); + } else + printk(KERN_INFO "ide-tape: bug, bh NULL\n"); } (void) idetape_add_chrdev_write_request(drive, blocks); tape->merge_bh_size = 0; @@ -1321,7 +1191,7 @@ static int idetape_init_read(ide_drive_t *drive) " 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; @@ -1368,23 +1238,18 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh; + struct idetape_bh *bh = tape->merge_bh; int blocks; while (bcount) { unsigned int count; - bh = tape->merge_bh; count = min(tape->buffer_size, bcount); bcount -= count; blocks = count / tape->blk_size; - while (count) { - atomic_set(&bh->b_count, - min(count, (unsigned int)bh->b_size)); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - count -= atomic_read(&bh->b_count); - bh = bh->b_reqnext; - } + atomic_set(&bh->b_count, count); + memset(bh->b_data, 0, atomic_read(&bh->b_count)); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_bh); } @@ -1596,7 +1461,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, "should be 0 now\n"); tape->merge_bh_size = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); if (!tape->merge_bh) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; @@ -1970,7 +1835,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0); + tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); if (tape->merge_bh != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); @@ -2201,11 +2066,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->buffer_size = *ctl * tape->blk_size; } buffer_size = tape->buffer_size; - tape->pages_per_buffer = buffer_size / PAGE_SIZE; - if (buffer_size % PAGE_SIZE) { - tape->pages_per_buffer++; - tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE; - } /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); -- cgit v1.2.3-18-g5258 From e998f30b45efb99a3c3ce7b5483f76317a17abed Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: use standard data transfer mechanism Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-atapi.c | 6 +-- drivers/ide/ide-tape.c | 112 ++++++++++-------------------------------------- 2 files changed, 24 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 3df5442de71..b9dd4503cbc 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -413,11 +413,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) * ->pc_callback() might change rq->data_len for * residual count, cache total length. */ - if (!blk_special_request(rq) && - (drive->media == ide_tape && !rq->bio)) - done = ide_rq_bytes(rq); /* FIXME */ - else - done = blk_rq_bytes(rq); + done = blk_rq_bytes(rq); /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b2afbc7bcb6..b373ac87635 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -292,65 +292,6 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -static int idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min( - (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), - bcount); - drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data + - atomic_read(&bh->b_count), count); - bcount -= count; - atomic_add(count, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } - - return bcount; -} - -static int idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - struct idetape_bh *bh = pc->bh; - int count; - - if (bcount && bh) { - count = min((unsigned int)pc->b_count, (unsigned int)bcount); - drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count); - bcount -= count; - pc->b_data += count; - pc->b_count -= count; - if (!pc->b_count) - pc->bh = NULL; - } - - return bcount; -} - -static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) -{ - struct idetape_bh *bh = pc->bh; - unsigned int bcount = pc->xferred; - - if (pc->flags & PC_FLAG_WRITING) - return; - if (bcount) { - if (bh == NULL || bcount > bh->b_size) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return; - } - atomic_set(&bh->b_count, bcount); - if (atomic_read(&bh->b_count) == bh->b_size) - pc->bh = NULL; - } -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -368,12 +309,10 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->xferred by asking the tape. */ - if (pc->flags & PC_FLAG_DMA_ERROR) { + if (pc->flags & PC_FLAG_DMA_ERROR) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(drive, pc); - } /* * If error was the result of a zero-length read or write command, @@ -458,7 +397,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; + rq->data_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -520,19 +459,6 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount, int write) -{ - unsigned int bleft; - - if (write) - bleft = idetape_output_buffers(drive, pc, bcount); - else - bleft = idetape_input_buffers(drive, pc, bcount); - - return bcount - bleft; -} - /* * Packet Command Interface * @@ -683,7 +609,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = bh; + pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; @@ -1063,10 +989,12 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; + size_t size = blocks * tape->blk_size; struct request *rq; - int ret, errors; + int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -1074,21 +1002,29 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->rq_disk = tape->disk; rq->special = (void *)bh; rq->sector = tape->first_frame; - rq->nr_sectors = blocks; - rq->current_nr_sectors = blocks; + + if (size) { + ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + __GFP_WAIT); + if (ret) + goto out_put; + } + blk_execute_rq(drive->queue, tape->disk, rq, 0); - errors = rq->errors; - ret = tape->blk_size * (blocks - rq->current_nr_sectors); - blk_put_request(rq); + /* calculate the number of transferred bytes and update bh */ + size -= rq->data_len; + if (cmd == REQ_IDETAPE_READ) + atomic_add(size, &bh->b_count); - if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) - return 0; + ret = size; + if (rq->errors == IDE_DRV_ERROR_GENERAL) + ret = -EIO; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (errors == IDE_DRV_ERROR_GENERAL) - return -EIO; +out_put: + blk_put_request(rq); return ret; } @@ -2034,8 +1970,6 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) u16 *ctl = (u16 *)&tape->caps[12]; drive->pc_callback = ide_tape_callback; - drive->pc_update_buffers = idetape_update_buffers; - drive->pc_io_buffers = ide_tape_io_buffers; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; -- cgit v1.2.3-18-g5258 From 6cf3d545f7d71b183e5b89960d4cc850a42c410d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: kill idetape_bh Impact: kill now unnecessary idetape_bh With everything using standard mechanisms, there is no need for idetape_bh anymore. Kill it and use tape->buf, cur and valid to describe data buffer instead. Changes worth mentioning are... * idetape_queue_rq_tail() now always queue tape->buf and and adjusts buffer state properly before completion. * idetape_pad_zeros() clears the buffer only once. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 305 ++++++++++++++----------------------------------- 1 file changed, 84 insertions(+), 221 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b373ac87635..d2e9c09b521 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -131,12 +131,6 @@ enum { IDETAPE_DIR_WRITE = (1 << 2), }; -struct idetape_bh { - u32 b_size; - atomic_t b_count; - char *b_data; -}; - /* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 @@ -218,14 +212,12 @@ typedef struct ide_tape_obj { /* Data buffer size chosen based on the tape's recommendation */ int buffer_size; - /* merge buffer */ - struct idetape_bh *merge_bh; - /* size of the merge buffer */ - int merge_bh_size; - /* pointer to current buffer head within the merge buffer */ - struct idetape_bh *bh; - char *b_data; - int b_count; + /* Staging buffer of buffer_size bytes */ + void *buf; + /* The read/write cursor */ + void *cur; + /* The number of valid bytes in buf */ + size_t valid; /* Measures average tape speed */ unsigned long avg_time; @@ -351,15 +343,6 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -/* Free data buffers completely. */ -static void ide_tape_kfree_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - - kfree(bh->b_data); - kfree(bh); -} - static void ide_tape_handle_dsc(ide_drive_t *); static int ide_tape_callback(ide_drive_t *drive, int dsc) @@ -603,8 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - struct idetape_bh *bh = (struct idetape_bh *)rq->special; - unsigned int length = rq->current_nr_sectors; + unsigned int length = rq->nr_sectors; ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -616,14 +598,11 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; - if (opcode == READ_6) { + if (opcode == READ_6) pc->c[0] = READ_6; - atomic_set(&bh->b_count, 0); - } else if (opcode == WRITE_6) { + else if (opcode == WRITE_6) { pc->c[0] = WRITE_6; pc->flags |= PC_FLAG_WRITING; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); } memcpy(rq->cmd, pc->c, 12); @@ -639,10 +618,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu," - " current_nr_sectors: %u\n", - (unsigned long long)rq->sector, rq->nr_sectors, - rq->current_nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ @@ -748,89 +725,6 @@ out: return ide_tape_issue_pc(drive, &cmd, pc); } -/* - * It returns a pointer to the newly allocated buffer, or NULL in case - * of failure. - */ -static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape, - int full) -{ - struct idetape_bh *bh; - - bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); - if (!bh) - return NULL; - - bh->b_data = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!bh->b_data) { - kfree(bh); - return NULL; - } - - bh->b_size = tape->buffer_size; - atomic_set(&bh->b_count, full ? bh->b_size : 0); - - return bh; -} - -static int idetape_copy_stage_from_user(idetape_tape_t *tape, - const char __user *buf, int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > bh->b_size - atomic_read(&bh->b_count)) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, - n)) - ret = 1; - atomic_add(n, &bh->b_count); - if (atomic_read(&bh->b_count) == bh->b_size) - tape->bh = NULL; - } - - return ret; -} - -static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - int n) -{ - struct idetape_bh *bh = tape->bh; - int ret = 0; - - if (n) { - if (bh == NULL || n > tape->b_count) { - printk(KERN_ERR "ide-tape: bh == NULL in %s\n", - __func__); - return 1; - } - if (copy_to_user(buf, tape->b_data, n)) - ret = 1; - tape->b_data += n; - tape->b_count -= n; - if (!tape->b_count) - tape->bh = NULL; - } - return ret; -} - -static void idetape_init_merge_buffer(idetape_tape_t *tape) -{ - struct idetape_bh *bh = tape->merge_bh; - tape->bh = tape->merge_bh; - - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) - atomic_set(&bh->b_count, 0); - else { - tape->b_data = bh->b_data; - tape->b_count = atomic_read(&bh->b_count); - } -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -928,10 +822,10 @@ static void __ide_tape_discard_merge_buffer(ide_drive_t *drive) return; clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags); - tape->merge_bh_size = 0; - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + tape->valid = 0; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; @@ -985,8 +879,7 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, - struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) { idetape_tape_t *tape = drive->driver_data; size_t size = blocks * tape->blk_size; @@ -1000,11 +893,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->special = (void *)bh; rq->sector = tape->first_frame; if (size) { - ret = blk_rq_map_kern(drive->queue, rq, bh->b_data, size, + ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, __GFP_WAIT); if (ret) goto out_put; @@ -1012,17 +904,17 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, blk_execute_rq(drive->queue, tape->disk, rq, 0); - /* calculate the number of transferred bytes and update bh */ + /* calculate the number of transferred bytes and update buffer state */ size -= rq->data_len; + tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) - atomic_add(size, &bh->b_count); + tape->valid = size; + else + tape->valid = 0; ret = size; if (rq->errors == IDE_DRV_ERROR_GENERAL) ret = -EIO; - - if (tape->merge_bh) - idetape_init_merge_buffer(tape); out_put: blk_put_request(rq); return ret; @@ -1064,49 +956,33 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) /* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks; - struct idetape_bh *bh; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" " but we are not writing.\n"); return; } - if (tape->merge_bh_size > tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); - tape->merge_bh_size = tape->buffer_size; - } - if (tape->merge_bh_size) { - blocks = tape->merge_bh_size / tape->blk_size; - if (tape->merge_bh_size % tape->blk_size) { - unsigned int i = tape->blk_size - - tape->merge_bh_size % tape->blk_size; + if (tape->buf) { + blocks = tape->valid / tape->blk_size; + if (tape->valid % tape->blk_size) { blocks++; - bh = tape->bh; - if (bh) { - memset(bh->b_data + atomic_read(&bh->b_count), - 0, i); - atomic_add(i, &bh->b_count); - } else - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + memset(tape->buf + tape->valid, 0, + tape->blk_size - tape->valid % tape->blk_size); } (void) idetape_add_chrdev_write_request(drive, blocks); - tape->merge_bh_size = 0; } - if (tape->merge_bh != NULL) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + if (tape->buf != NULL) { + kfree(tape->buf); + tape->buf = NULL; } tape->chrdev_dir = IDETAPE_DIR_NONE; } @@ -1122,15 +998,15 @@ static int idetape_init_read(ide_drive_t *drive) ide_tape_flush_merge_buffer(drive); idetape_flush_tape_buffers(drive); } - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size should be" - " 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_READ; + tape->cur = tape->buf; /* * Issue a read 0 command to ensure that DSC handshake is @@ -1140,11 +1016,10 @@ static int idetape_init_read(ide_drive_t *drive) */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0, - tape->merge_bh); + REQ_IDETAPE_READ, 0); if (bytes_read < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } @@ -1157,8 +1032,6 @@ static int idetape_init_read(ide_drive_t *drive) /* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { - idetape_tape_t *tape = drive->driver_data; - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* If we are at a filemark, return a read length of 0 */ @@ -1167,27 +1040,21 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_read(drive); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; - struct idetape_bh *bh = tape->merge_bh; - int blocks; + + memset(tape->buf, 0, tape->buffer_size); while (bcount) { - unsigned int count; + unsigned int count = min(tape->buffer_size, bcount); - count = min(tape->buffer_size, bcount); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + count / tape->blk_size); bcount -= count; - blocks = count / tape->blk_size; - atomic_set(&bh->b_count, count); - memset(bh->b_data, 0, atomic_read(&bh->b_count)); - - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, - tape->merge_bh); } } @@ -1267,7 +1134,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - tape->merge_bh_size = 0; + tape->valid = 0; if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) ++count; ide_tape_discard_merge_buffer(drive, 0); @@ -1333,20 +1200,20 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, return rc; if (count == 0) return (0); - if (tape->merge_bh_size) { - actually_read = min((unsigned int)(tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, actually_read)) + if (tape->valid) { + actually_read = min_t(unsigned int, tape->valid, count); + if (copy_to_user(buf, tape->cur, actually_read)) ret = -EFAULT; buf += actually_read; - tape->merge_bh_size -= actually_read; count -= actually_read; + tape->cur += actually_read; + tape->valid -= actually_read; } while (count >= tape->buffer_size) { bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, bytes_read)) + if (copy_to_user(buf, tape->cur, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -1357,10 +1224,11 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, temp)) + if (copy_to_user(buf, tape->cur, temp)) ret = -EFAULT; actually_read += temp; - tape->merge_bh_size = bytes_read-temp; + tape->cur += temp; + tape->valid -= temp; } finish: if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { @@ -1392,16 +1260,15 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { if (tape->chrdev_dir == IDETAPE_DIR_READ) ide_tape_discard_merge_buffer(drive, 1); - if (tape->merge_bh || tape->merge_bh_size) { - printk(KERN_ERR "ide-tape: merge_bh_size " - "should be 0 now\n"); - tape->merge_bh_size = 0; + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; } - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0); - if (!tape->merge_bh) + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) return -ENOMEM; tape->chrdev_dir = IDETAPE_DIR_WRITE; - idetape_init_merge_buffer(tape); + tape->cur = tape->buf; /* * Issue a write 0 command to ensure that DSC handshake is @@ -1411,11 +1278,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, */ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0, - tape->merge_bh); + REQ_IDETAPE_WRITE, 0); if (retval < 0) { - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } @@ -1423,23 +1289,19 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->merge_bh_size) { - if (tape->merge_bh_size >= tape->buffer_size) { - printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); - tape->merge_bh_size = 0; - } - actually_written = min((unsigned int) - (tape->buffer_size - tape->merge_bh_size), - (unsigned int)count); - if (idetape_copy_stage_from_user(tape, buf, actually_written)) - ret = -EFAULT; + if (tape->valid < tape->buffer_size) { + actually_written = min_t(unsigned int, + tape->buffer_size - tape->valid, + count); + if (copy_from_user(tape->cur, buf, actually_written)) + ret = -EFAULT; buf += actually_written; - tape->merge_bh_size += actually_written; count -= actually_written; + tape->cur += actually_written; + tape->valid += actually_written; - if (tape->merge_bh_size == tape->buffer_size) { + if (tape->valid == tape->buffer_size) { ssize_t retval; - tape->merge_bh_size = 0; retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); @@ -1447,7 +1309,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } while (count >= tape->buffer_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size)) + if (copy_from_user(tape->cur, buf, tape->buffer_size)) ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; @@ -1458,9 +1320,10 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, buf, count)) + if (copy_from_user(tape->cur, buf, count)) ret = -EFAULT; - tape->merge_bh_size += count; + tape->cur += count; + tape->valid += count; } return ret ? ret : actually_written; } @@ -1623,7 +1486,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = tape->merge_bh_size / + block_offset = tape->valid / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -1771,12 +1634,12 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor) idetape_tape_t *tape = drive->driver_data; ide_tape_flush_merge_buffer(drive); - tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1); - if (tape->merge_bh != NULL) { + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (tape->buf != NULL) { idetape_pad_zeros(drive, tape->blk_size * (tape->user_bs_factor - 1)); - ide_tape_kfree_buffer(tape); - tape->merge_bh = NULL; + kfree(tape->buf); + tape->buf = NULL; } idetape_write_filemark(drive); idetape_flush_tape_buffers(drive); @@ -2042,7 +1905,7 @@ static void ide_tape_release(struct device *dev) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->merge_bh_size); + BUG_ON(tape->valid); drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP; drive->driver_data = NULL; -- cgit v1.2.3-18-g5258 From 3596b66452491a3cff26256a5e6e6061a66c4142 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:02 +0900 Subject: ide-tape: unify r/w init paths Impact: cleanup Read and write init paths are almost identical. Unify them into idetape_init_rw(). Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 110 +++++++++++++++++++++---------------------------- 1 file changed, 46 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d2e9c09b521..4da7fa9bca1 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -987,42 +987,50 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) tape->chrdev_dir = IDETAPE_DIR_NONE; } -static int idetape_init_read(ide_drive_t *drive) +static int idetape_init_rw(ide_drive_t *drive, int dir) { idetape_tape_t *tape = drive->driver_data; - int bytes_read; + int rc; - /* Initialize read operation */ - if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { - ide_tape_flush_merge_buffer(drive); - idetape_flush_tape_buffers(drive); - } - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_READ; - tape->cur = tape->buf; + BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE); - /* - * Issue a read 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. - * No point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - bytes_read = idetape_queue_rw_tail(drive, - REQ_IDETAPE_READ, 0); - if (bytes_read < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return bytes_read; - } + if (tape->chrdev_dir == dir) + return 0; + + if (tape->chrdev_dir == IDETAPE_DIR_READ) + ide_tape_discard_merge_buffer(drive, 1); + else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { + ide_tape_flush_merge_buffer(drive); + idetape_flush_tape_buffers(drive); + } + + if (tape->buf || tape->valid) { + printk(KERN_ERR "ide-tape: valid should be 0 now\n"); + tape->valid = 0; + } + + tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); + if (!tape->buf) + return -ENOMEM; + tape->chrdev_dir = dir; + tape->cur = tape->buf; + + /* + * Issue a 0 rw command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. + */ + if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { + int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ + : REQ_IDETAPE_WRITE; + + rc = idetape_queue_rw_tail(drive, cmd, 0); + if (rc < 0) { + kfree(tape->buf); + tape->buf = NULL; + tape->chrdev_dir = IDETAPE_DIR_NONE; + return rc; } } @@ -1038,7 +1046,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) return 0; - idetape_init_read(drive); + idetape_init_rw(drive, IDETAPE_DIR_READ); return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); } @@ -1195,7 +1203,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive); + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; if (count == 0) @@ -1249,6 +1257,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ssize_t actually_written = 0; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; + int rc; /* The drive is write protected. */ if (tape->write_prot) @@ -1257,36 +1266,9 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { - if (tape->chrdev_dir == IDETAPE_DIR_READ) - ide_tape_discard_merge_buffer(drive, 1); - if (tape->buf || tape->valid) { - printk(KERN_ERR "ide-tape: valid should be 0 now\n"); - tape->valid = 0; - } - tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL); - if (!tape->buf) - return -ENOMEM; - tape->chrdev_dir = IDETAPE_DIR_WRITE; - tape->cur = tape->buf; - - /* - * Issue a write 0 command to ensure that DSC handshake is - * switched from completion mode to buffer available mode. No - * point in issuing this if DSC overlap isn't supported, some - * drives (Seagate STT3401A) will return an error. - */ - if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) { - ssize_t retval = idetape_queue_rw_tail(drive, - REQ_IDETAPE_WRITE, 0); - if (retval < 0) { - kfree(tape->buf); - tape->buf = NULL; - tape->chrdev_dir = IDETAPE_DIR_NONE; - return retval; - } - } - } + rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); + if (rc < 0) + return rc; if (count == 0) return (0); if (tape->valid < tape->buffer_size) { -- cgit v1.2.3-18-g5258 From 71294cf93d22ceaa75448cc6ebee2c65897be8c2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: use byte size instead of sectors on rw issue functions Impact: cleanup Byte size is what most issue functions deal with, make idetape_queue_rw_tail() and its wrappers take byte size instead of sector counts. idetape_chrdev_read() and write() functions are converted to use tape->buffer_size instead of ctl from tape->cap. This cleans up code a little bit and will ease the next r/w reimplementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 45 ++++++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4da7fa9bca1..d5e9bb286e3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -879,15 +879,15 @@ static void ide_tape_discard_merge_buffer(ide_drive_t *drive, * Generate a read/write request for the block device interface and wait for it * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) { idetape_tape_t *tape = drive->driver_data; - size_t size = blocks * tape->blk_size; struct request *rq; int ret; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); + BUG_ON(size < 0 || size % tape->blk_size); rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; @@ -954,17 +954,16 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) } /* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) { debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); } static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int blocks; if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer" @@ -972,15 +971,10 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) return; } if (tape->buf) { - blocks = tape->valid / tape->blk_size; - if (tape->valid % tape->blk_size) { - blocks++; - memset(tape->buf + tape->valid, 0, - tape->blk_size - tape->valid % tape->blk_size); - } - (void) idetape_add_chrdev_write_request(drive, blocks); - } - if (tape->buf != NULL) { + size_t aligned = roundup(tape->valid, tape->blk_size); + + memset(tape->cur, 0, aligned - tape->valid); + idetape_add_chrdev_write_request(drive, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1038,9 +1032,9 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) } /* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) { - debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); + debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) @@ -1048,7 +1042,7 @@ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) idetape_init_rw(drive, IDETAPE_DIR_READ); - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -1060,8 +1054,7 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) while (bcount) { unsigned int count = min(tape->buffer_size, bcount); - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - count / tape->blk_size); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count); bcount -= count; } } @@ -1193,7 +1186,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1218,7 +1210,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, tape->valid -= actually_read; } while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; if (copy_to_user(buf, tape->cur, bytes_read)) @@ -1228,7 +1221,8 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, ctl); + bytes_read = idetape_add_chrdev_read_request(drive, + tape->buffer_size); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -1256,7 +1250,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; - u16 ctl = *(u16 *)&tape->caps[12]; int rc; /* The drive is write protected. */ @@ -1284,7 +1277,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->valid == tape->buffer_size) { ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); if (retval <= 0) return (retval); } @@ -1295,7 +1289,8 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->buffer_size; count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, ctl); + retval = idetape_add_chrdev_write_request(drive, + tape->buffer_size); actually_written += tape->buffer_size; if (retval <= 0) return (retval); -- cgit v1.2.3-18-g5258 From 4344d07fb8dbf0cbfec1f7d7c1afeccaceaaa120 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-tape: simplify read/write functions Impact: cleanup idetape_chrdev_read/write() functions are unnecessarily complex when everything can be handled in a single loop. Collapse idetape_add_chrdev_read/write_request() into the rw functions and simplify the implementation. Signed-off-by: Tejun Heo --- drivers/ide/ide-tape.c | 149 +++++++++++++++++-------------------------------- 1 file changed, 50 insertions(+), 99 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d5e9bb286e3..2599579e417 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -953,14 +953,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) pc->flags |= PC_FLAG_WAIT_FOR_DSC; } -/* Queue up a character device originated write request. */ -static int idetape_add_chrdev_write_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, size); -} - static void ide_tape_flush_merge_buffer(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -974,7 +966,7 @@ static void ide_tape_flush_merge_buffer(ide_drive_t *drive) size_t aligned = roundup(tape->valid, tape->blk_size); memset(tape->cur, 0, aligned - tape->valid); - idetape_add_chrdev_write_request(drive, aligned); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned); kfree(tape->buf); tape->buf = NULL; } @@ -1031,20 +1023,6 @@ static int idetape_init_rw(ide_drive_t *drive, int dir) return 0; } -/* called from idetape_chrdev_read() to service a chrdev read request. */ -static int idetape_add_chrdev_read_request(ide_drive_t *drive, int size) -{ - debug_log(DBG_PROCS, "Enter %s, %d bytes\n", __func__, size); - - /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) - return 0; - - idetape_init_rw(drive, IDETAPE_DIR_READ); - - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, size); -} - static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; @@ -1184,8 +1162,9 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t bytes_read, temp, actually_read = 0, rc; + size_t done = 0; ssize_t ret = 0; + int rc; debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); @@ -1195,52 +1174,43 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } + rc = idetape_init_rw(drive, IDETAPE_DIR_READ); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid) { - actually_read = min_t(unsigned int, tape->valid, count); - if (copy_to_user(buf, tape->cur, actually_read)) - ret = -EFAULT; - buf += actually_read; - count -= actually_read; - tape->cur += actually_read; - tape->valid -= actually_read; - } - while (count >= tape->buffer_size) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - if (copy_to_user(buf, tape->cur, bytes_read)) - ret = -EFAULT; - buf += bytes_read; - count -= bytes_read; - actually_read += bytes_read; - } - if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, - tape->buffer_size); - if (bytes_read <= 0) - goto finish; - temp = min((unsigned long)count, (unsigned long)bytes_read); - if (copy_to_user(buf, tape->cur, temp)) + + while (done < count) { + size_t todo; + + /* refill if staging buffer is empty */ + if (!tape->valid) { + /* If we are at a filemark, nothing more to read */ + if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) + break; + /* read */ + if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, + tape->buffer_size) <= 0) + break; + } + + /* copy out */ + todo = min_t(size_t, count - done, tape->valid); + if (copy_to_user(buf + done, tape->cur, todo)) ret = -EFAULT; - actually_read += temp; - tape->cur += temp; - tape->valid -= temp; + + tape->cur += todo; + tape->valid -= todo; + done += todo; } -finish: - if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { + + if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) { debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return ret ? ret : actually_read; + return ret ? ret : done; } static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, @@ -1248,7 +1218,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, { struct ide_tape_obj *tape = file->private_data; ide_drive_t *drive = tape->drive; - ssize_t actually_written = 0; + size_t done = 0; ssize_t ret = 0; int rc; @@ -1262,47 +1232,28 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); if (rc < 0) return rc; - if (count == 0) - return (0); - if (tape->valid < tape->buffer_size) { - actually_written = min_t(unsigned int, - tape->buffer_size - tape->valid, - count); - if (copy_from_user(tape->cur, buf, actually_written)) - ret = -EFAULT; - buf += actually_written; - count -= actually_written; - tape->cur += actually_written; - tape->valid += actually_written; - - if (tape->valid == tape->buffer_size) { - ssize_t retval; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - if (retval <= 0) - return (retval); - } - } - while (count >= tape->buffer_size) { - ssize_t retval; - if (copy_from_user(tape->cur, buf, tape->buffer_size)) - ret = -EFAULT; - buf += tape->buffer_size; - count -= tape->buffer_size; - retval = idetape_add_chrdev_write_request(drive, - tape->buffer_size); - actually_written += tape->buffer_size; - if (retval <= 0) - return (retval); - } - if (count) { - actually_written += count; - if (copy_from_user(tape->cur, buf, count)) + + while (done < count) { + size_t todo; + + /* flush if staging buffer is full */ + if (tape->valid == tape->buffer_size && + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + tape->buffer_size) <= 0) + return rc; + + /* copy in */ + todo = min_t(size_t, count - done, + tape->buffer_size - tape->valid); + if (copy_from_user(tape->cur, buf + done, todo)) ret = -EFAULT; - tape->cur += count; - tape->valid += count; + + tape->cur += todo; + tape->valid += todo; + done += todo; } - return ret ? ret : actually_written; + + return ret ? ret : done; } static int idetape_write_filemark(ide_drive_t *drive) -- cgit v1.2.3-18-g5258 From 29d1a4371035e01b0d079bc5aa88b50f5af7a566 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide-atapi: kill unused fields and callbacks Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo --- drivers/ide/ide-atapi.c | 17 ++++------------- drivers/ide/ide-tape.c | 1 - 2 files changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index b9dd4503cbc..afe5a432387 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -359,11 +359,8 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; - } else { + } else pc->xferred = pc->req_xfer; - if (drive->pc_update_buffers) - drive->pc_update_buffers(drive, pc); - } debug_log("%s: DMA finished\n", drive->name); } @@ -463,16 +460,11 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } - if (drive->media == ide_tape && pc->bh) - done = drive->pc_io_buffers(drive, pc, bcount, write); - else { - done = min_t(unsigned int, bcount, cmd->nleft); - ide_pio_bytes(drive, cmd, write, done); - } + done = min_t(unsigned int, bcount, cmd->nleft); + ide_pio_bytes(drive, cmd, write, done); - /* Update the current position */ + /* Update transferred byte count */ pc->xferred += done; - pc->cur_pos += done; bcount -= done; @@ -650,7 +642,6 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) /* We haven't transferred any data yet */ pc->xferred = 0; - pc->cur_pos = pc->buf; valid_tf = IDE_VALID_DEVICE; bcount = ((drive->media == ide_tape) ? diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2599579e417..8dfc68892d6 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -591,7 +591,6 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->bh = NULL; pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; -- cgit v1.2.3-18-g5258 From 5ad960fe8d0e4f99fe2b8dded45e8251137293c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 08:46:03 +0900 Subject: ide: drop rq->data handling from ide_map_sg() Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: Tejun Heo Cc: Jens Axboe --- drivers/ide/ide-io.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6e3094e2277..a0309ea661a 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -248,11 +248,7 @@ void ide_map_sg(ide_drive_t *drive, struct ide_cmd *cmd) struct scatterlist *sg = hwif->sg_table; struct request *rq = cmd->rq; - if (!rq->bio) { - sg_init_one(sg, rq->data, rq->data_len); - cmd->sg_nents = 1; - } else - cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); + cmd->sg_nents = blk_rq_map_sg(drive->queue, rq, sg); } EXPORT_SYMBOL_GPL(ide_map_sg); -- cgit v1.2.3-18-g5258 From 586cf2681f527ce8b85b9bd57c8b9f7945fbe051 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Apr 2009 12:16:56 +0900 Subject: ide-dma: don't reset request fields on dma_timeout_retry() Impact: drop unnecessary code Now that everything uses bio and block operations, there is no need to reset request fields manually when retrying a request. Every field is guaranteed to be always valid. Drop unnecessary request field resetting from ide_dma_timeout_retry(). Signed-off-by: Tejun Heo --- drivers/ide/ide-dma.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index a0b8cab1d9a..d9123ecae4a 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -510,23 +510,11 @@ ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) /* * un-busy drive etc and make sure request is sane */ - rq = hwif->rq; - if (!rq) - goto out; - - hwif->rq = NULL; - - rq->errors = 0; - - if (!rq->bio) - goto out; - - rq->sector = rq->bio->bi_sector; - rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9; - rq->hard_cur_sectors = rq->current_nr_sectors; - rq->buffer = bio_data(rq->bio); -out: + if (rq) { + hwif->rq = NULL; + rq->errors = 0; + } return ret; } -- cgit v1.2.3-18-g5258 From 40cbbb781d3eba5d6ac0860db078af490e5c7c6b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:19 +0900 Subject: block: implement and use [__]blk_end_request_all() There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Russell King Cc: Stephen Rothwell Cc: Mike Miller Cc: Martin Schwidefsky Cc: Jeff Garzik Cc: Rusty Russell Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: James Bottomley --- drivers/block/cpqarray.c | 3 +-- drivers/block/sx8.c | 3 +-- drivers/block/virtio_blk.c | 2 +- drivers/block/xen-blkfront.c | 4 +--- drivers/cdrom/gdrom.c | 2 +- drivers/cdrom/viocd.c | 25 ++++--------------------- drivers/memstick/core/mspro_block.c | 2 +- drivers/s390/block/dasd.c | 17 ++++------------- drivers/s390/char/tape_block.c | 15 ++++----------- drivers/scsi/scsi_lib.c | 2 +- 10 files changed, 19 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index ca268ca1115..488a8f4a60a 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -1024,8 +1024,7 @@ static inline void complete_command(cmdlist_t *cmd, int timeout) cmd->req.sg[i].size, ddir); DBGPX(printk("Done with %p\n", rq);); - if (__blk_end_request(rq, error, blk_rq_bytes(rq))) - BUG(); + __blk_end_request_all(rq, error); } /* diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index ff0448e4bf0..60e85bb6f79 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -749,8 +749,7 @@ static inline void carm_end_request_queued(struct carm_host *host, struct request *req = crq->rq; int rc; - rc = __blk_end_request(req, error, blk_rq_bytes(req)); - assert(rc == 0); + __blk_end_request_all(req, error); rc = carm_put_request(host, crq); assert(rc == 0); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 5d34764c8a8..50745e64414 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -62,7 +62,7 @@ static void blk_done(struct virtqueue *vq) break; } - __blk_end_request(vbr->req, error, blk_rq_bytes(vbr->req)); + __blk_end_request_all(vbr->req, error); list_del(&vbr->list); mempool_free(vbr, vblk->pool); } diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8f905089b72..cd6cfe3b51e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -551,7 +551,6 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) for (i = info->ring.rsp_cons; i != rp; i++) { unsigned long id; - int ret; bret = RING_GET_RESPONSE(&info->ring, i); id = bret->id; @@ -578,8 +577,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) dev_dbg(&info->xbdev->dev, "Bad return from blkdev data " "request: %x\n", bret->status); - ret = __blk_end_request(req, error, blk_rq_bytes(req)); - BUG_ON(ret); + __blk_end_request_all(req, error); break; default: BUG(); diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 2eecb779437..fee9a9e83fc 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -632,7 +632,7 @@ static void gdrom_readdisk_dma(struct work_struct *work) * before handling ending the request */ spin_lock(&gdrom_lock); list_del_init(&req->queuelist); - __blk_end_request(req, err, blk_rq_bytes(req)); + __blk_end_request_all(req, err); } spin_unlock(&gdrom_lock); kfree(read_command); diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 13929356135..cc3efa096e1 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -291,23 +291,6 @@ static int send_request(struct request *req) return 0; } -static void viocd_end_request(struct request *req, int error) -{ - int nsectors = req->hard_nr_sectors; - - /* - * Make sure it's fully ended, and ensure that we process - * at least one sector. - */ - if (blk_pc_request(req)) - nsectors = (req->data_len + 511) >> 9; - if (!nsectors) - nsectors = 1; - - if (__blk_end_request(req, error, nsectors << 9)) - BUG(); -} - static int rwreq; static void do_viocd_request(struct request_queue *q) @@ -316,11 +299,11 @@ static void do_viocd_request(struct request_queue *q) while ((rwreq == 0) && ((req = elv_next_request(q)) != NULL)) { if (!blk_fs_request(req)) - viocd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); else if (send_request(req) < 0) { printk(VIOCD_KERN_WARNING "unable to send message to OS/400!"); - viocd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); } else rwreq++; } @@ -531,9 +514,9 @@ return_complete: "with rc %d:0x%04X: %s\n", req, event->xRc, bevent->sub_result, err->msg); - viocd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); } else - viocd_end_request(req, 0); + __blk_end_request_all(req, 0); /* restart handling of incoming requests */ spin_unlock_irqrestore(&viocd_reqlock, flags); diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index de143deb06f..a41634699f8 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -826,7 +826,7 @@ static void mspro_block_submit_req(struct request_queue *q) if (msb->eject) { while ((req = elv_next_request(q)) != NULL) - __blk_end_request(req, -ENODEV, blk_rq_bytes(req)); + __blk_end_request_all(req, -ENODEV); return; } diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index d1815272c43..fabec95686b 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1613,15 +1613,6 @@ void dasd_block_clear_timer(struct dasd_block *block) del_timer(&block->timer); } -/* - * posts the buffer_cache about a finalized request - */ -static inline void dasd_end_request(struct request *req, int error) -{ - if (__blk_end_request(req, error, blk_rq_bytes(req))) - BUG(); -} - /* * Process finished error recovery ccw. */ @@ -1676,7 +1667,7 @@ static void __dasd_process_request_queue(struct dasd_block *block) "Rejecting write request %p", req); blkdev_dequeue_request(req); - dasd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); continue; } cqr = basedev->discipline->build_cp(basedev, block, req); @@ -1705,7 +1696,7 @@ static void __dasd_process_request_queue(struct dasd_block *block) "on request %p", PTR_ERR(cqr), req); blkdev_dequeue_request(req); - dasd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); continue; } /* @@ -1731,7 +1722,7 @@ static void __dasd_cleanup_cqr(struct dasd_ccw_req *cqr) status = cqr->block->base->discipline->free_cp(cqr, req); if (status <= 0) error = status ? status : -EIO; - dasd_end_request(req, error); + __blk_end_request_all(req, error); } /* @@ -2040,7 +2031,7 @@ static void dasd_flush_request_queue(struct dasd_block *block) spin_lock_irq(&block->request_queue_lock); while ((req = elv_next_request(block->request_queue))) { blkdev_dequeue_request(req); - dasd_end_request(req, -EIO); + __blk_end_request_all(req, -EIO); } spin_unlock_irq(&block->request_queue_lock); } diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index f32e89e7c4f..86596d3813b 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -73,13 +73,6 @@ tapeblock_trigger_requeue(struct tape_device *device) /* * Post finished request. */ -static void -tapeblock_end_request(struct request *req, int error) -{ - if (blk_end_request(req, error, blk_rq_bytes(req))) - BUG(); -} - static void __tapeblock_end_request(struct tape_request *ccw_req, void *data) { @@ -90,7 +83,7 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data) device = ccw_req->device; req = (struct request *) data; - tapeblock_end_request(req, (ccw_req->rc == 0) ? 0 : -EIO); + blk_end_request_all(req, (ccw_req->rc == 0) ? 0 : -EIO); if (ccw_req->rc == 0) /* Update position. */ device->blk_data.block_position = @@ -118,7 +111,7 @@ tapeblock_start_request(struct tape_device *device, struct request *req) ccw_req = device->discipline->bread(device, req); if (IS_ERR(ccw_req)) { DBF_EVENT(1, "TBLOCK: bread failed\n"); - tapeblock_end_request(req, -EIO); + blk_end_request_all(req, -EIO); return PTR_ERR(ccw_req); } ccw_req->callback = __tapeblock_end_request; @@ -131,7 +124,7 @@ tapeblock_start_request(struct tape_device *device, struct request *req) * Start/enqueueing failed. No retries in * this case. */ - tapeblock_end_request(req, -EIO); + blk_end_request_all(req, -EIO); device->discipline->free_bread(ccw_req); } @@ -177,7 +170,7 @@ tapeblock_requeue(struct work_struct *work) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); blkdev_dequeue_request(req); spin_unlock_irq(&device->blk_data.request_queue_lock); - tapeblock_end_request(req, -EIO); + blk_end_request_all(req, -EIO); spin_lock_irq(&device->blk_data.request_queue_lock); continue; } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d1cb64ad1a3..756ac7c93de 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -922,7 +922,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (driver_byte(result) & DRIVER_SENSE) scsi_print_sense("", cmd); } - blk_end_request(req, -EIO, blk_rq_bytes(req)); + blk_end_request_all(req, -EIO); scsi_next_command(cmd); break; case ACTION_REPREP: -- cgit v1.2.3-18-g5258 From f06d9a2b52e246a66b606130cea3f0d7b7be17a7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:19 +0900 Subject: block: replace end_request() with [__]blk_end_request_cur() end_request() has been kept around for backward compatibility; however, it's about time for it to go away. * There aren't too many users left. * Its use of @updtodate is pretty confusing. * In some cases, newer code ends up using mixture of end_request() and [__]blk_end_request[_all](), which is way too confusing. So, add [__]blk_end_request_cur() and replace end_request() with it. Most conversions are straightforward. Noteworthy ones are... * paride/pcd: next_request() updated to take 0/-errno instead of 1/0. * paride/pf: pf_end_request() and next_request() updated to take 0/-errno instead of 1/0. * xd: xd_readwrite() updated to return 0/-errno instead of 1/0. * mtd/mtd_blkdevs: blktrans_discard_request() updated to return 0/-errno instead of 1/0. Unnecessary local variable res initialization removed from mtd_blktrans_thread(). [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Joerg Dorchain Acked-by: Geert Uytterhoeven Acked-by: Grant Likely Acked-by: Laurent Vivier Cc: Tim Waugh Cc: Stephen Rothwell Cc: Paul Mackerras Cc: Jeremy Fitzhardinge Cc: Markus Lidel Cc: David Woodhouse Cc: Pete Zaitcev Cc: unsik Kim --- drivers/block/amiflop.c | 10 +++++----- drivers/block/ataflop.c | 14 +++++++------- drivers/block/hd.c | 14 +++++++------- drivers/block/mg_disk.c | 16 ++++++++-------- drivers/block/paride/pcd.c | 12 ++++++------ drivers/block/paride/pd.c | 5 +++-- drivers/block/paride/pf.c | 28 ++++++++++++++-------------- drivers/block/ps3disk.c | 6 +++--- drivers/block/swim.c | 14 +++++++------- drivers/block/swim3.c | 26 +++++++++++++------------- drivers/block/xd.c | 15 ++++++++------- drivers/block/xen-blkfront.c | 2 +- drivers/block/xsysace.c | 4 ++-- drivers/block/z2ram.c | 4 ++-- drivers/cdrom/gdrom.c | 6 +++--- drivers/message/i2o/i2o_block.c | 2 +- drivers/mtd/mtd_blkdevs.c | 22 +++++++++++----------- drivers/sbus/char/jsflash.c | 8 ++++---- 18 files changed, 105 insertions(+), 103 deletions(-) (limited to 'drivers') diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 8df436ff706..b99a2a606d0 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1359,7 +1359,7 @@ static void redo_fd_request(void) #endif block = CURRENT->sector + cnt; if ((int)block > floppy->blocks) { - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } @@ -1373,11 +1373,11 @@ static void redo_fd_request(void) if ((rq_data_dir(CURRENT) != READ) && (rq_data_dir(CURRENT) != WRITE)) { printk(KERN_WARNING "do_fd_request: unknown command\n"); - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } if (get_track(drive, track) == -1) { - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } @@ -1391,7 +1391,7 @@ static void redo_fd_request(void) /* keep the drive spinning while writes are scheduled */ if (!fd_motor_on(drive)) { - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } /* @@ -1410,7 +1410,7 @@ static void redo_fd_request(void) CURRENT->nr_sectors -= CURRENT->current_nr_sectors; CURRENT->sector += CURRENT->current_nr_sectors; - end_request(CURRENT, 1); + __blk_end_request_cur(CURRENT, 0); goto repeat; } diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 4234c11c1e4..44a8702136a 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -612,7 +612,7 @@ static void fd_error( void ) CURRENT->errors++; if (CURRENT->errors >= MAX_ERRORS) { printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive ); - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); } else if (CURRENT->errors == RECALIBRATE_ERRORS) { printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive ); @@ -734,7 +734,7 @@ static void do_fd_action( int drive ) /* all sectors finished */ CURRENT->nr_sectors -= CURRENT->current_nr_sectors; CURRENT->sector += CURRENT->current_nr_sectors; - end_request(CURRENT, 1); + __blk_end_request_cur(CURRENT, 0); redo_fd_request(); return; } @@ -1141,7 +1141,7 @@ static void fd_rwsec_done1(int status) /* all sectors finished */ CURRENT->nr_sectors -= CURRENT->current_nr_sectors; CURRENT->sector += CURRENT->current_nr_sectors; - end_request(CURRENT, 1); + __blk_end_request_cur(CURRENT, 0); redo_fd_request(); } return; @@ -1414,7 +1414,7 @@ repeat: if (!UD.connected) { /* drive not connected */ printk(KERN_ERR "Unknown Device: fd%d\n", drive ); - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } @@ -1430,12 +1430,12 @@ repeat: /* user supplied disk type */ if (--type >= NUM_DISK_MINORS) { printk(KERN_WARNING "fd%d: invalid disk format", drive ); - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } if (minor2disktype[type].drive_types > DriveType) { printk(KERN_WARNING "fd%d: unsupported disk format", drive ); - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } type = minor2disktype[type].index; @@ -1445,7 +1445,7 @@ repeat: } if (CURRENT->sector + 1 > UDT->blocks) { - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); goto repeat; } diff --git a/drivers/block/hd.c b/drivers/block/hd.c index baaa9e486e5..5cb300b81c6 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -410,7 +410,7 @@ static void bad_rw_intr(void) if (req != NULL) { struct hd_i_struct *disk = req->rq_disk->private_data; if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); disk->special_op = disk->recalibrate = 1; } else if (req->errors % RESET_FREQ == 0) reset = 1; @@ -466,7 +466,7 @@ ok_to_read: req->buffer+512); #endif if (req->current_nr_sectors <= 0) - end_request(req, 1); + __blk_end_request_cur(req, 0); if (i > 0) { SET_HANDLER(&read_intr); return; @@ -505,7 +505,7 @@ ok_to_write: --req->current_nr_sectors; req->buffer += 512; if (!i || (req->bio && req->current_nr_sectors <= 0)) - end_request(req, 1); + __blk_end_request_cur(req, 0); if (i > 0) { SET_HANDLER(&write_intr); outsw(HD_DATA, req->buffer, 256); @@ -548,7 +548,7 @@ static void hd_times_out(unsigned long dummy) #ifdef DEBUG printk("%s: too many errors\n", name); #endif - end_request(CURRENT, 0); + __blk_end_request_cur(CURRENT, -EIO); } hd_request(); spin_unlock_irq(hd_queue->queue_lock); @@ -563,7 +563,7 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req) } if (disk->head > 16) { printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } disk->special_op = 0; return 1; @@ -607,7 +607,7 @@ repeat: ((block+nsect) > get_capacity(req->rq_disk))) { printk("%s: bad access: block=%d, count=%d\n", req->rq_disk->disk_name, block, nsect); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); goto repeat; } @@ -647,7 +647,7 @@ repeat: break; default: printk("unknown hd-command\n"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); break; } } diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index f3898353d0a..408c2bd8a43 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -285,7 +285,7 @@ static void mg_bad_rw_intr(struct mg_host *host) if (req != NULL) if (++req->errors >= MG_MAX_ERRORS || host->error == MG_ERR_TIMEOUT) - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } static unsigned int mg_out(struct mg_host *host, @@ -351,7 +351,7 @@ static void mg_read(struct request *req) if (req->current_nr_sectors <= 0) { MG_DBG("remain : %d sects\n", remains); - end_request(req, 1); + __blk_end_request_cur(req, 0); if (remains > 0) req = elv_next_request(host->breq); } @@ -395,7 +395,7 @@ static void mg_write(struct request *req) if (req->current_nr_sectors <= 0) { MG_DBG("remain : %d sects\n", remains); - end_request(req, 1); + __blk_end_request_cur(req, 0); if (remains > 0) req = elv_next_request(host->breq); } @@ -448,7 +448,7 @@ ok_to_read: /* let know if current segment done */ if (req->current_nr_sectors <= 0) - end_request(req, 1); + __blk_end_request_cur(req, 0); /* set handler if read remains */ if (i > 0) { @@ -497,7 +497,7 @@ ok_to_write: /* let know if current segment or all done */ if (!i || (req->bio && req->current_nr_sectors <= 0)) - end_request(req, 1); + __blk_end_request_cur(req, 0); /* write 1 sector and set handler if remains */ if (i > 0) { @@ -563,7 +563,7 @@ static void mg_request_poll(struct request_queue *q) default: printk(KERN_WARNING "%s:%d unknown command\n", __func__, __LINE__); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); break; } } @@ -617,7 +617,7 @@ static unsigned int mg_issue_req(struct request *req, default: printk(KERN_WARNING "%s:%d unknown command\n", __func__, __LINE__); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); break; } return MG_ERR_NONE; @@ -655,7 +655,7 @@ static void mg_request(struct request_queue *q) "%s: bad access: sector=%d, count=%d\n", req->rq_disk->disk_name, sect_num, sect_cnt); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index e91d4b4b014..9fd57c2aa46 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -735,16 +735,16 @@ static void do_pcd_request(struct request_queue * q) ps_set_intr(do_pcd_read, NULL, 0, nice); return; } else - end_request(pcd_req, 0); + __blk_end_request_cur(pcd_req, -EIO); } } -static inline void next_request(int success) +static inline void next_request(int err) { unsigned long saved_flags; spin_lock_irqsave(&pcd_lock, saved_flags); - end_request(pcd_req, success); + __blk_end_request_cur(pcd_req, err); pcd_busy = 0; do_pcd_request(pcd_queue); spin_unlock_irqrestore(&pcd_lock, saved_flags); @@ -781,7 +781,7 @@ static void pcd_start(void) if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) { pcd_bufblk = -1; - next_request(0); + next_request(-EIO); return; } @@ -796,7 +796,7 @@ static void do_pcd_read(void) pcd_retries = 0; pcd_transfer(); if (!pcd_count) { - next_request(1); + next_request(0); return; } @@ -815,7 +815,7 @@ static void do_pcd_read_drq(void) return; } pcd_bufblk = -1; - next_request(0); + next_request(-EIO); return; } diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 9299455b0af..0732df4e901 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -410,7 +410,8 @@ static void run_fsm(void) pd_claimed = 0; phase = NULL; spin_lock_irqsave(&pd_lock, saved_flags); - end_request(pd_req, res); + __blk_end_request_cur(pd_req, + res == Ok ? 0 : -EIO); pd_req = elv_next_request(pd_queue); if (!pd_req) stop = 1; @@ -477,7 +478,7 @@ static int pd_next_buf(void) if (pd_count) return 0; spin_lock_irqsave(&pd_lock, saved_flags); - end_request(pd_req, 1); + __blk_end_request_cur(pd_req, 0); pd_count = pd_req->current_nr_sectors; pd_buf = pd_req->buffer; spin_unlock_irqrestore(&pd_lock, saved_flags); diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index bef3b997ba3..3871e3586d6 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -750,10 +750,10 @@ static int pf_ready(void) static struct request_queue *pf_queue; -static void pf_end_request(int uptodate) +static void pf_end_request(int err) { if (pf_req) { - end_request(pf_req, uptodate); + __blk_end_request_cur(pf_req, err); pf_req = NULL; } } @@ -773,7 +773,7 @@ repeat: pf_count = pf_req->current_nr_sectors; if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) { - pf_end_request(0); + pf_end_request(-EIO); goto repeat; } @@ -788,7 +788,7 @@ repeat: pi_do_claimed(pf_current->pi, do_pf_write); else { pf_busy = 0; - pf_end_request(0); + pf_end_request(-EIO); goto repeat; } } @@ -805,7 +805,7 @@ static int pf_next_buf(void) return 1; if (!pf_count) { spin_lock_irqsave(&pf_spin_lock, saved_flags); - pf_end_request(1); + pf_end_request(0); pf_req = elv_next_request(pf_queue); spin_unlock_irqrestore(&pf_spin_lock, saved_flags); if (!pf_req) @@ -816,12 +816,12 @@ static int pf_next_buf(void) return 0; } -static inline void next_request(int success) +static inline void next_request(int err) { unsigned long saved_flags; spin_lock_irqsave(&pf_spin_lock, saved_flags); - pf_end_request(success); + pf_end_request(err); pf_busy = 0; do_pf_request(pf_queue); spin_unlock_irqrestore(&pf_spin_lock, saved_flags); @@ -844,7 +844,7 @@ static void do_pf_read_start(void) pi_do_claimed(pf_current->pi, do_pf_read_start); return; } - next_request(0); + next_request(-EIO); return; } pf_mask = STAT_DRQ; @@ -863,7 +863,7 @@ static void do_pf_read_drq(void) pi_do_claimed(pf_current->pi, do_pf_read_start); return; } - next_request(0); + next_request(-EIO); return; } pi_read_block(pf_current->pi, pf_buf, 512); @@ -871,7 +871,7 @@ static void do_pf_read_drq(void) break; } pi_disconnect(pf_current->pi); - next_request(1); + next_request(0); } static void do_pf_write(void) @@ -890,7 +890,7 @@ static void do_pf_write_start(void) pi_do_claimed(pf_current->pi, do_pf_write_start); return; } - next_request(0); + next_request(-EIO); return; } @@ -903,7 +903,7 @@ static void do_pf_write_start(void) pi_do_claimed(pf_current->pi, do_pf_write_start); return; } - next_request(0); + next_request(-EIO); return; } pi_write_block(pf_current->pi, pf_buf, 512); @@ -923,11 +923,11 @@ static void do_pf_write_done(void) pi_do_claimed(pf_current->pi, do_pf_write_start); return; } - next_request(0); + next_request(-EIO); return; } pi_disconnect(pf_current->pi); - next_request(1); + next_request(0); } static int __init pf_init(void) diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index bccc42bb921..d23b54bc2f5 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -158,7 +158,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev, if (res) { dev_err(&dev->sbd.core, "%s:%u: %s failed %d\n", __func__, __LINE__, op, res); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); return 0; } @@ -180,7 +180,7 @@ static int ps3disk_submit_flush_request(struct ps3_storage_device *dev, if (res) { dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n", __func__, __LINE__, res); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); return 0; } @@ -205,7 +205,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev, break; } else { blk_dump_rq_flags(req, DEVICE_NAME " bad request"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } } diff --git a/drivers/block/swim.c b/drivers/block/swim.c index d22cc385693..6544a7b06bf 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -532,39 +532,39 @@ static void redo_fd_request(struct request_queue *q) fs = req->rq_disk->private_data; if (req->sector < 0 || req->sector >= fs->total_secs) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (req->current_nr_sectors == 0) { - end_request(req, 1); + __blk_end_request_cur(req, 0); continue; } if (!fs->disk_in) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (rq_data_dir(req) == WRITE) { if (fs->write_protected) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } } switch (rq_data_dir(req)) { case WRITE: /* NOT IMPLEMENTED */ - end_request(req, 0); + __blk_end_request_cur(req, -EIO); break; case READ: if (floppy_read_sectors(fs, req->sector, req->current_nr_sectors, req->buffer)) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } req->nr_sectors -= req->current_nr_sectors; req->sector += req->current_nr_sectors; req->buffer += req->current_nr_sectors * 512; - end_request(req, 1); + __blk_end_request_cur(req, 0); break; } } diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index 612965307ba..5904f7b73c6 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -320,15 +320,15 @@ static void start_request(struct floppy_state *fs) #endif if (req->sector < 0 || req->sector >= fs->total_secs) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (req->current_nr_sectors == 0) { - end_request(req, 1); + __blk_end_request_cur(req, 0); continue; } if (fs->ejected) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } @@ -336,7 +336,7 @@ static void start_request(struct floppy_state *fs) if (fs->write_prot < 0) fs->write_prot = swim3_readbit(fs, WRITE_PROT); if (fs->write_prot) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } } @@ -508,7 +508,7 @@ static void act(struct floppy_state *fs) case do_transfer: if (fs->cur_cyl != fs->req_cyl) { if (fs->retries > 5) { - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; return; } @@ -540,7 +540,7 @@ static void scan_timeout(unsigned long data) out_8(&sw->intr_enable, 0); fs->cur_cyl = -1; if (fs->retries > 5) { - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); } else { @@ -559,7 +559,7 @@ static void seek_timeout(unsigned long data) out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); printk(KERN_ERR "swim3: seek timeout\n"); - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); } @@ -583,7 +583,7 @@ static void settle_timeout(unsigned long data) return; } printk(KERN_ERR "swim3: seek settle timeout\n"); - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); } @@ -615,7 +615,7 @@ static void xfer_timeout(unsigned long data) fd_req->current_nr_sectors -= s; printk(KERN_ERR "swim3: timeout %sing sector %ld\n", (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector); - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); } @@ -646,7 +646,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk(KERN_ERR "swim3: seen sector but cyl=ff?\n"); fs->cur_cyl = -1; if (fs->retries > 5) { - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); } else { @@ -731,7 +731,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk("swim3: error %sing block %ld (err=%x)\n", rq_data_dir(fd_req) == WRITE? "writ": "read", (long)fd_req->sector, err); - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; } } else { @@ -740,7 +740,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid); printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n", fs->state, rq_data_dir(fd_req), intr, err); - end_request(fd_req, 0); + __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); break; @@ -749,7 +749,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) fd_req->current_nr_sectors -= fs->scount; fd_req->buffer += fs->scount * 512; if (fd_req->current_nr_sectors <= 0) { - end_request(fd_req, 1); + __blk_end_request_cur(fd_req, 0); fs->state = idle; } else { fs->req_sector += fs->scount; diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 64b496fce98..6f6ad82ec0c 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -314,21 +314,22 @@ static void do_xd_request (struct request_queue * q) int retry; if (!blk_fs_request(req)) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (block + count > get_capacity(req->rq_disk)) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (rw != READ && rw != WRITE) { printk("do_xd_request: unknown request\n"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } for (retry = 0; (retry < XD_RETRIES) && !res; retry++) res = xd_readwrite(rw, disk, req->buffer, block, count); - end_request(req, res); /* wrap up, 0 = fail, 1 = success */ + /* wrap up, 0 = success, -errno = fail */ + __blk_end_request_cur(req, res); } } @@ -418,7 +419,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_ printk("xd%c: %s timeout, recalibrating drive\n",'a'+drive,(operation == READ ? "read" : "write")); xd_recalibrate(drive); spin_lock_irq(&xd_lock); - return (0); + return -EIO; case 2: if (sense[0] & 0x30) { printk("xd%c: %s - ",'a'+drive,(operation == READ ? "reading" : "writing")); @@ -439,7 +440,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_ else printk(" - no valid disk address\n"); spin_lock_irq(&xd_lock); - return (0); + return -EIO; } if (xd_dma_buffer) for (i=0; i < (temp * 0x200); i++) @@ -448,7 +449,7 @@ static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_ count -= temp, buffer += temp * 0x200, block += temp; } spin_lock_irq(&xd_lock); - return (1); + return 0; } /* xd_recalibrate: recalibrate a given drive and reset controller if necessary */ diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index cd6cfe3b51e..b4564479f64 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -302,7 +302,7 @@ static void do_blkif_request(struct request_queue *rq) while ((req = elv_next_request(rq)) != NULL) { info = req->rq_disk->private_data; if (!blk_fs_request(req)) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 4aecf5dc6a9..b1e1d7e5ab1 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -466,7 +466,7 @@ struct request *ace_get_next_request(struct request_queue * q) while ((req = elv_next_request(q)) != NULL) { if (blk_fs_request(req)) break; - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } return req; } @@ -494,7 +494,7 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Drop all pending requests */ while ((req = elv_next_request(ace->queue)) != NULL) - end_request(req, 0); + __blk_end_request_cur(req, -EIO); /* Drop back to IDLE state and notify waiters */ ace->fsm_state = ACE_FSM_STATE_IDLE; diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index 80754cdd311..b66ad58a3c3 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -77,7 +77,7 @@ static void do_z2_request(struct request_queue *q) if (start + len > z2ram_size) { printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n", req->sector, req->current_nr_sectors); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } while (len) { @@ -93,7 +93,7 @@ static void do_z2_request(struct request_queue *q) start += size; len -= size; } - end_request(req, 1); + __blk_end_request_cur(req, 0); } } diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index fee9a9e83fc..cab2b1fb2fe 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -654,17 +654,17 @@ static void gdrom_request(struct request_queue *rq) while ((req = elv_next_request(rq)) != NULL) { if (!blk_fs_request(req)) { printk(KERN_DEBUG "GDROM: Non-fs request ignored\n"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } if (rq_data_dir(req) != READ) { printk(KERN_NOTICE "GDROM: Read only device -"); printk(" write request ignored\n"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } if (req->nr_sectors) gdrom_request_handler_dma(req); else - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } } diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index a443e136dc4..221317e6a00 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -923,7 +923,7 @@ static void i2o_block_request_fn(struct request_queue *q) break; } } else - end_request(req, 0); + __blk_end_request_cur(req, -EIO); } }; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index a49a9c8f2cb..76c4c8d1307 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -54,33 +54,33 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, if (req->cmd_type == REQ_TYPE_LINUX_BLOCK && req->cmd[0] == REQ_LB_OP_DISCARD) - return !tr->discard(dev, block, nsect); + return tr->discard(dev, block, nsect); if (!blk_fs_request(req)) - return 0; + return -EIO; if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk)) - return 0; + return -EIO; switch(rq_data_dir(req)) { case READ: for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->readsect(dev, block, buf)) - return 0; - return 1; + return -EIO; + return 0; case WRITE: if (!tr->writesect) - return 0; + return -EIO; for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->writesect(dev, block, buf)) - return 0; - return 1; + return -EIO; + return 0; default: printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req)); - return 0; + return -EIO; } } @@ -96,7 +96,7 @@ static int mtd_blktrans_thread(void *arg) while (!kthread_should_stop()) { struct request *req; struct mtd_blktrans_dev *dev; - int res = 0; + int res; req = elv_next_request(rq); @@ -119,7 +119,7 @@ static int mtd_blktrans_thread(void *arg) spin_lock_irq(rq->queue_lock); - end_request(req, res); + __blk_end_request_cur(req, res); } spin_unlock_irq(rq->queue_lock); diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index a85ad05e854..09617884a50 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -192,25 +192,25 @@ static void jsfd_do_request(struct request_queue *q) size_t len = req->current_nr_sectors << 9; if ((offset + len) > jdp->dsize) { - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if (rq_data_dir(req) != READ) { printk(KERN_ERR "jsfd: write\n"); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } if ((jdp->dbase & 0xff000000) != 0x20000000) { printk(KERN_ERR "jsfd: bad base %x\n", (int)jdp->dbase); - end_request(req, 0); + __blk_end_request_cur(req, -EIO); continue; } jsfd_read(req->buffer, jdp->dbase + offset, len); - end_request(req, 1); + __blk_end_request_cur(req, 0); } } -- cgit v1.2.3-18-g5258 From 731ec497e5888c6792ad62613ae9be97eebcd7ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:20 +0900 Subject: block: kill rq->data Now that all block request data transfer is done via bio, rq->data isn't used. Kill it. While at it, make the roles of rq->special and buffer clear. [ Impact: drop now unncessary field from struct request ] Signed-off-by: Tejun Heo Cc: Boaz Harrosh --- drivers/scsi/scsi_lib.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 756ac7c93de..aa9fc572e45 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1088,7 +1088,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) return ret; } else { BUG_ON(req->data_len); - BUG_ON(req->data); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); req->buffer = NULL; -- cgit v1.2.3-18-g5258 From 5b5c5d12b91cb6b2a2967f06aef35d59008dc2e7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:06 +0900 Subject: amiflop,ataflop,xd,mg_disk: clean up unnecessary stuff from block drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rq_data_dir() can only be READ or WRITE and rq->sector and nr_sectors are always automatically updated after partial request completion. Don't worry about rq_data_dir() not being either READ or WRITE or manually update sector and nr_sectors. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Jörg Dorchain Cc: Geert Uytterhoeven Cc: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/amiflop.c | 7 ------- drivers/block/ataflop.c | 4 ---- drivers/block/mg_disk.c | 10 ---------- drivers/block/xd.c | 9 ++------- 4 files changed, 2 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index b99a2a606d0..8ff95f2c0ed 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1371,11 +1371,6 @@ static void redo_fd_request(void) "0x%08lx\n", track, sector, data); #endif - if ((rq_data_dir(CURRENT) != READ) && (rq_data_dir(CURRENT) != WRITE)) { - printk(KERN_WARNING "do_fd_request: unknown command\n"); - __blk_end_request_cur(CURRENT, -EIO); - goto repeat; - } if (get_track(drive, track) == -1) { __blk_end_request_cur(CURRENT, -EIO); goto repeat; @@ -1407,8 +1402,6 @@ static void redo_fd_request(void) break; } } - CURRENT->nr_sectors -= CURRENT->current_nr_sectors; - CURRENT->sector += CURRENT->current_nr_sectors; __blk_end_request_cur(CURRENT, 0); goto repeat; diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 44a8702136a..25067287211 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -732,8 +732,6 @@ static void do_fd_action( int drive ) } else { /* all sectors finished */ - CURRENT->nr_sectors -= CURRENT->current_nr_sectors; - CURRENT->sector += CURRENT->current_nr_sectors; __blk_end_request_cur(CURRENT, 0); redo_fd_request(); return; @@ -1139,8 +1137,6 @@ static void fd_rwsec_done1(int status) } else { /* all sectors finished */ - CURRENT->nr_sectors -= CURRENT->current_nr_sectors; - CURRENT->sector += CURRENT->current_nr_sectors; __blk_end_request_cur(CURRENT, 0); redo_fd_request(); } diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 408c2bd8a43..2c00ad90cd6 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -560,11 +560,6 @@ static void mg_request_poll(struct request_queue *q) case WRITE: mg_write(req); break; - default: - printk(KERN_WARNING "%s:%d unknown command\n", - __func__, __LINE__); - __blk_end_request_cur(req, -EIO); - break; } } } @@ -614,11 +609,6 @@ static unsigned int mg_issue_req(struct request *req, outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); break; - default: - printk(KERN_WARNING "%s:%d unknown command\n", - __func__, __LINE__); - __blk_end_request_cur(req, -EIO); - break; } return MG_ERR_NONE; } diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 6f6ad82ec0c..14be4c1ed1a 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -308,7 +308,6 @@ static void do_xd_request (struct request_queue * q) while ((req = elv_next_request(q)) != NULL) { unsigned block = req->sector; unsigned count = req->nr_sectors; - int rw = rq_data_dir(req); XD_INFO *disk = req->rq_disk->private_data; int res = 0; int retry; @@ -321,13 +320,9 @@ static void do_xd_request (struct request_queue * q) __blk_end_request_cur(req, -EIO); continue; } - if (rw != READ && rw != WRITE) { - printk("do_xd_request: unknown request\n"); - __blk_end_request_cur(req, -EIO); - continue; - } for (retry = 0; (retry < XD_RETRIES) && !res; retry++) - res = xd_readwrite(rw, disk, req->buffer, block, count); + res = xd_readwrite(rq_data_dir(req), disk, req->buffer, + block, count); /* wrap up, 0 = success, -errno = fail */ __blk_end_request_cur(req, res); } -- cgit v1.2.3-18-g5258 From cd4c34ebec155e5c10f897d9bebf618248121e70 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:07 +0900 Subject: ps3disk: simplify request completion ps3disk_interrupt() always completes requests fully but it uses rq->hard_cur_sectors for FLUSH requests for some reason. Drop them and simply use __blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/ps3disk.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index d23b54bc2f5..f6586e4d351 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -231,7 +231,6 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data) struct request *req; int res, read, error; u64 tag, status; - unsigned long num_sectors; const char *op; res = lv1_storage_get_async_status(dev->sbd.dev_id, &tag, &status); @@ -261,11 +260,9 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data) if (req->cmd_type == REQ_TYPE_LINUX_BLOCK && req->cmd[0] == REQ_LB_OP_FLUSH) { read = 0; - num_sectors = req->hard_cur_sectors; op = "flush"; } else { read = !rq_data_dir(req); - num_sectors = req->nr_sectors; op = read ? "read" : "write"; } if (status) { @@ -281,7 +278,7 @@ static irqreturn_t ps3disk_interrupt(int irq, void *data) } spin_lock(&priv->lock); - __blk_end_request(req, error, num_sectors << 9); + __blk_end_request_all(req, error); priv->req = NULL; ps3disk_do_request(dev, priv->queue); spin_unlock(&priv->lock); -- cgit v1.2.3-18-g5258 From 044208506d35bd62396c4673176e2c12393905b8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:08 +0900 Subject: sunvdc: kill vdc_end_request() vdc_end_request() is a thin silly wrapper on top of __blk_end_request(). Kill it. [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: David S. Miller Signed-off-by: Jens Axboe --- drivers/block/sunvdc.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index 5861e33efe6..f59887c5ffb 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -212,11 +212,6 @@ static void vdc_end_special(struct vdc_port *port, struct vio_disk_desc *desc) vdc_finish(&port->vio, -err, WAITING_FOR_GEN_CMD); } -static void vdc_end_request(struct request *req, int error, int num_sectors) -{ - __blk_end_request(req, error, num_sectors << 9); -} - static void vdc_end_one(struct vdc_port *port, struct vio_dring_state *dr, unsigned int index) { @@ -239,7 +234,7 @@ static void vdc_end_one(struct vdc_port *port, struct vio_dring_state *dr, rqe->req = NULL; - vdc_end_request(req, (desc->status ? -EIO : 0), desc->size >> 9); + __blk_end_request(req, (desc->status ? -EIO : 0), desc->size); if (blk_queue_stopped(port->disk->queue)) blk_start_queue(port->disk->queue); @@ -453,7 +448,7 @@ static void do_vdc_request(struct request_queue *q) blkdev_dequeue_request(req); if (__send_request(req) < 0) - vdc_end_request(req, -EIO, req->hard_nr_sectors); + __blk_end_request_all(req, -EIO); } } -- cgit v1.2.3-18-g5258 From e091eb67af957bac4e4f7410c5d1aa263ee483a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:11 +0900 Subject: hd: clean up request completion paths hd read/write_intr() functions manually manipulate request to incrementally complete it, which block layer already supports. Simply use block layer completion routines instead of manual partial completion. While at it, clear unnecessary elv_next_request() check at the tail of read_intr(). This also makes read and write_intr() more consistent. [ Impact: cleanup ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/hd.c | 36 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 5cb300b81c6..75b9ca95c4e 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -452,32 +452,25 @@ static void read_intr(void) bad_rw_intr(); hd_request(); return; + ok_to_read: req = CURRENT; insw(HD_DATA, req->buffer, 256); - req->sector++; - req->buffer += 512; - req->errors = 0; - i = --req->nr_sectors; - --req->current_nr_sectors; #ifdef DEBUG printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", - req->rq_disk->disk_name, req->sector, req->nr_sectors, + req->rq_disk->disk_name, req->sector + 1, req->nr_sectors - 1, req->buffer+512); #endif - if (req->current_nr_sectors <= 0) - __blk_end_request_cur(req, 0); - if (i > 0) { + if (__blk_end_request(req, 0, 512)) { SET_HANDLER(&read_intr); return; } + (void) inb_p(HD_STATUS); #if (HD_DELAY > 0) last_req = read_timer(); #endif - if (elv_next_request(QUEUE)) - hd_request(); - return; + hd_request(); } static void write_intr(void) @@ -499,23 +492,18 @@ static void write_intr(void) bad_rw_intr(); hd_request(); return; + ok_to_write: - req->sector++; - i = --req->nr_sectors; - --req->current_nr_sectors; - req->buffer += 512; - if (!i || (req->bio && req->current_nr_sectors <= 0)) - __blk_end_request_cur(req, 0); - if (i > 0) { + if (__blk_end_request(req, 0, 512)) { SET_HANDLER(&write_intr); outsw(HD_DATA, req->buffer, 256); - } else { + return; + } + #if (HD_DELAY > 0) - last_req = read_timer(); + last_req = read_timer(); #endif - hd_request(); - } - return; + hd_request(); } static void recal_intr(void) -- cgit v1.2.3-18-g5258 From 467ca759fc83fc35cb7d15aec0d74c62cffc4481 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:12 +0900 Subject: swim3: clean up request completion paths swim3 curiously tries to update request parameters before calling __blk_end_request() when __blk_end_request() will do it anyway, and it updates request for partial completion manually instead of using blk_update_request(). Also, it does some spurious checks on rq such as testing whether rq->sector is negative or current_nr_sectors is zero right after fetching. Drop unnecessary stuff and use standard block layer mechanisms. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Benjamin Herrenschmidt Signed-off-by: Jens Axboe --- drivers/block/swim3.c | 31 +++++-------------------------- 1 file changed, 5 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index 5904f7b73c6..424855945b9 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -319,14 +319,10 @@ static void start_request(struct floppy_state *fs) req->errors, req->current_nr_sectors); #endif - if (req->sector < 0 || req->sector >= fs->total_secs) { + if (req->sector >= fs->total_secs) { __blk_end_request_cur(req, -EIO); continue; } - if (req->current_nr_sectors == 0) { - __blk_end_request_cur(req, 0); - continue; - } if (fs->ejected) { __blk_end_request_cur(req, -EIO); continue; @@ -593,8 +589,6 @@ static void xfer_timeout(unsigned long data) struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; struct dbdma_regs __iomem *dr = fs->dma; - struct dbdma_cmd *cp = fs->dma_cmd; - unsigned long s; int n; fs->timeout_pending = 0; @@ -605,14 +599,6 @@ static void xfer_timeout(unsigned long data) out_8(&sw->intr_enable, 0); out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION); out_8(&sw->select, RELAX); - if (rq_data_dir(fd_req) == WRITE) - ++cp; - if (ld_le16(&cp->xfer_status) != 0) - s = fs->scount - ((ld_le16(&cp->res_count) + 511) >> 9); - else - s = 0; - fd_req->sector += s; - fd_req->current_nr_sectors -= s; printk(KERN_ERR "swim3: timeout %sing sector %ld\n", (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector); __blk_end_request_cur(fd_req, -EIO); @@ -719,9 +705,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) if (intr & ERROR_INTR) { n = fs->scount - 1 - resid / 512; if (n > 0) { - fd_req->sector += n; - fd_req->current_nr_sectors -= n; - fd_req->buffer += n * 512; + blk_update_request(fd_req, 0, n << 9); fs->req_sector += n; } if (fs->retries < 5) { @@ -745,13 +729,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) start_request(fs); break; } - fd_req->sector += fs->scount; - fd_req->current_nr_sectors -= fs->scount; - fd_req->buffer += fs->scount * 512; - if (fd_req->current_nr_sectors <= 0) { - __blk_end_request_cur(fd_req, 0); - fs->state = idle; - } else { + if (__blk_end_request(fd_req, 0, fs->scount << 9)) { fs->req_sector += fs->scount; if (fs->req_sector > fs->secpertrack) { fs->req_sector -= fs->secpertrack; @@ -761,7 +739,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) } } act(fs); - } + } else + fs->state = idle; } if (fs->state == idle) start_request(fs); -- cgit v1.2.3-18-g5258 From e138b4e08ef65771000fbe6d93d67e3960ff862b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:13 +0900 Subject: swim: clean up request completion paths swim curiously tries to update request parameters before calling __blk_end_request() when __blk_end_request() will do it anyway and unnecessarily checks whether current_nr_sectors is zero right after fetching. Drop unnecessary stuff and use standard block layer mechanisms. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/swim.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/swim.c b/drivers/block/swim.c index 6544a7b06bf..97ef4266c4c 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -535,10 +535,6 @@ static void redo_fd_request(struct request_queue *q) __blk_end_request_cur(req, -EIO); continue; } - if (req->current_nr_sectors == 0) { - __blk_end_request_cur(req, 0); - continue; - } if (!fs->disk_in) { __blk_end_request_cur(req, -EIO); continue; @@ -561,9 +557,6 @@ static void redo_fd_request(struct request_queue *q) __blk_end_request_cur(req, -EIO); continue; } - req->nr_sectors -= req->current_nr_sectors; - req->sector += req->current_nr_sectors; - req->buffer += req->current_nr_sectors * 512; __blk_end_request_cur(req, 0); break; } -- cgit v1.2.3-18-g5258 From eec9462088a26c046d4db3100796a340a50890b8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:14 +0900 Subject: mg_disk: fold mg_disk.h into mg_disk.c include/linux/mg_disk.h is used only by drivers/block/mg_disk.c. No reason to put it in a separate header. Fold it into mg_disk.c. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 186 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 185 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 2c00ad90cd6..2c6127ee834 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -22,10 +22,194 @@ #include #include #include -#include #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1) +/* name for block device */ +#define MG_DISK_NAME "mgd" +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +#define MG_DISK_MAJ 0 +#define MG_DISK_MAX_PART 16 +#define MG_SECTOR_SIZE 512 +#define MG_MAX_SECTS 256 + +/* Register offsets */ +#define MG_BUFF_OFFSET 0x8000 +#define MG_STORAGE_BUFFER_SIZE 0x200 +#define MG_REG_OFFSET 0xC000 +#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ +#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ +#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4) +#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6) +#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8) +#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA) +#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC) +#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */ +#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */ +#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) +#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) + +/* "Drive Select/Head Register" bit values */ +#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ +#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) + + +/* "Device Control Register" bit values */ +#define MG_REG_CTRL_INTR_ENABLE 0x0 +#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) +#define MG_REG_CTRL_RESET (0x1<<2) +#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 +#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) +#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 +#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) +#define MG_REG_CTRL_DPD_DISABLE 0x0 +#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) + +/* Status register bit */ +/* error bit in status register */ +#define MG_REG_STATUS_BIT_ERROR 0x01 +/* corrected error in status register */ +#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 +/* data request bit in status register */ +#define MG_REG_STATUS_BIT_DATA_REQ 0x08 +/* DSC - Drive Seek Complete */ +#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 +/* DWF - Drive Write Fault */ +#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 +#define MG_REG_STATUS_BIT_READY 0x40 +#define MG_REG_STATUS_BIT_BUSY 0x80 + +/* handy status */ +#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) +#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ + (MG_REG_STATUS_BIT_BUSY | \ + MG_REG_STATUS_BIT_WRITE_FAULT | \ + MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) + +/* Error register */ +#define MG_REG_ERR_AMNF 0x01 +#define MG_REG_ERR_ABRT 0x04 +#define MG_REG_ERR_IDNF 0x10 +#define MG_REG_ERR_UNC 0x40 +#define MG_REG_ERR_BBK 0x80 + +/* error code for others */ +#define MG_ERR_NONE 0 +#define MG_ERR_TIMEOUT 0x100 +#define MG_ERR_INIT_STAT 0x101 +#define MG_ERR_TRANSLATION 0x102 +#define MG_ERR_CTRL_RST 0x103 +#define MG_ERR_INV_STAT 0x104 +#define MG_ERR_RSTOUT 0x105 + +#define MG_MAX_ERRORS 6 /* Max read/write errors */ + +/* command */ +#define MG_CMD_RD 0x20 +#define MG_CMD_WR 0x30 +#define MG_CMD_SLEEP 0x99 +#define MG_CMD_WAKEUP 0xC3 +#define MG_CMD_ID 0xEC +#define MG_CMD_WR_CONF 0x3C +#define MG_CMD_RD_CONF 0x40 + +/* operation mode */ +#define MG_OP_CASCADE (1 << 0) +#define MG_OP_CASCADE_SYNC_RD (1 << 1) +#define MG_OP_CASCADE_SYNC_WR (1 << 2) +#define MG_OP_INTERLEAVE (1 << 3) + +/* synchronous */ +#define MG_BURST_LAT_4 (3 << 4) +#define MG_BURST_LAT_5 (4 << 4) +#define MG_BURST_LAT_6 (5 << 4) +#define MG_BURST_LAT_7 (6 << 4) +#define MG_BURST_LAT_8 (7 << 4) +#define MG_BURST_LEN_4 (1 << 1) +#define MG_BURST_LEN_8 (2 << 1) +#define MG_BURST_LEN_16 (3 << 1) +#define MG_BURST_LEN_32 (4 << 1) +#define MG_BURST_LEN_CONT (0 << 1) + +/* timeout value (unit: ms) */ +#define MG_TMAX_CONF_TO_CMD 1 +#define MG_TMAX_WAIT_RD_DRQ 10 +#define MG_TMAX_WAIT_WR_DRQ 500 +#define MG_TMAX_RST_TO_BUSY 10 +#define MG_TMAX_HDRST_TO_RDY 500 +#define MG_TMAX_SWRST_TO_RDY 500 +#define MG_TMAX_RSTOUT 3000 + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST) + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + struct mg_host *host; +}; + +/* main structure for mflash driver */ +struct mg_host { + struct device *dev; + + struct request_queue *breq; + spinlock_t lock; + struct gendisk *gd; + + struct timer_list timer; + void (*mg_do_intr) (struct mg_host *); + + u16 id[ATA_ID_WORDS]; + + u16 cyls; + u16 heads; + u16 sectors; + u32 n_sectors; + u32 nres_sectors; + + void __iomem *dev_base; + unsigned int irq; + unsigned int rst; + unsigned int rstout; + + u32 major; + u32 error; +}; + +/* + * Debugging macro and defines + */ +#undef DO_MG_DEBUG +#ifdef DO_MG_DEBUG +# define MG_DBG(fmt, args...) \ + printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args) +#else /* CONFIG_MG_DEBUG */ +# define MG_DBG(fmt, args...) do { } while (0) +#endif /* CONFIG_MG_DEBUG */ + static void mg_request(struct request_queue *); static void mg_dump_status(const char *msg, unsigned int stat, -- cgit v1.2.3-18-g5258 From a03bb5a32fff4aa23f081a3cff7e98d4084104cd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Apr 2009 13:06:15 +0900 Subject: mg_disk: clean up request completion paths mg_disk implements its own partial completion. Convert to standard block layer partial completion. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 117 ++++++++++++++---------------------------------- 1 file changed, 33 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 2c6127ee834..1a4cc968cfe 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -503,95 +503,68 @@ static unsigned int mg_out(struct mg_host *host, static void mg_read(struct request *req) { - u32 remains, j; + u32 j; struct mg_host *host = req->rq_disk->private_data; - remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) != MG_ERR_NONE) mg_bad_rw_intr(host); MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", - remains, req->sector, req->buffer); + req->nr_sectors, req->sector, req->buffer); + + do { + u16 *buff = (u16 *)req->buffer; - while (remains) { if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) { - *(u16 *)req->buffer = - inw((unsigned long)host->dev_base + - MG_BUFF_OFFSET + (j << 1)); - req->buffer += 2; - } - - req->sector++; - req->errors = 0; - remains = --req->nr_sectors; - --req->current_nr_sectors; - - if (req->current_nr_sectors <= 0) { - MG_DBG("remain : %d sects\n", remains); - __blk_end_request_cur(req, 0); - if (remains > 0) - req = elv_next_request(host->breq); - } + for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) + *buff++ = inw((unsigned long)host->dev_base + + MG_BUFF_OFFSET + (j << 1)); outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - } + } while (__blk_end_request(req, 0, MG_SECTOR_SIZE)); } static void mg_write(struct request *req) { - u32 remains, j; + u32 j; struct mg_host *host = req->rq_disk->private_data; - remains = req->nr_sectors; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", - remains, req->sector, req->buffer); - while (remains) { + req->nr_sectors, req->sector, req->buffer); + + do { + u16 *buff = (u16 *)req->buffer; + if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } - for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) { - outw(*(u16 *)req->buffer, - (unsigned long)host->dev_base + - MG_BUFF_OFFSET + (j << 1)); - req->buffer += 2; - } - req->sector++; - remains = --req->nr_sectors; - --req->current_nr_sectors; - - if (req->current_nr_sectors <= 0) { - MG_DBG("remain : %d sects\n", remains); - __blk_end_request_cur(req, 0); - if (remains > 0) - req = elv_next_request(host->breq); - } + for (j = 0; j < MG_SECTOR_SIZE >> 1; j++) + outw(*buff++, (unsigned long)host->dev_base + + MG_BUFF_OFFSET + (j << 1)); outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - } + } while (__blk_end_request(req, 0, MG_SECTOR_SIZE)); } static void mg_read_intr(struct mg_host *host) { u32 i; + u16 *buff; struct request *req; /* check status */ @@ -612,39 +585,24 @@ static void mg_read_intr(struct mg_host *host) ok_to_read: /* get current segment of request */ req = elv_next_request(host->breq); + buff = (u16 *)req->buffer; /* read 1 sector */ - for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) { - *(u16 *)req->buffer = - inw((unsigned long)host->dev_base + MG_BUFF_OFFSET + - (i << 1)); - req->buffer += 2; - } + for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) + *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET + + (i << 1)); - /* manipulate request */ MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n", req->sector, req->nr_sectors - 1, req->buffer); - req->sector++; - req->errors = 0; - i = --req->nr_sectors; - --req->current_nr_sectors; - - /* let know if current segment done */ - if (req->current_nr_sectors <= 0) - __blk_end_request_cur(req, 0); - - /* set handler if read remains */ - if (i > 0) { - host->mg_do_intr = mg_read_intr; - mod_timer(&host->timer, jiffies + 3 * HZ); - } - /* send read confirm */ outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - /* goto next request */ - if (!i) + if (__blk_end_request(req, 0, MG_SECTOR_SIZE)) { + /* set handler if read remains */ + host->mg_do_intr = mg_read_intr; + mod_timer(&host->timer, jiffies + 3 * HZ); + } else /* goto next request */ mg_request(host->breq); } @@ -653,6 +611,7 @@ static void mg_write_intr(struct mg_host *host) u32 i, j; u16 *buff; struct request *req; + bool rem; /* get current segment of request */ req = elv_next_request(host->breq); @@ -673,18 +632,8 @@ static void mg_write_intr(struct mg_host *host) return; ok_to_write: - /* manipulate request */ - req->sector++; - i = --req->nr_sectors; - --req->current_nr_sectors; - req->buffer += MG_SECTOR_SIZE; - - /* let know if current segment or all done */ - if (!i || (req->bio && req->current_nr_sectors <= 0)) - __blk_end_request_cur(req, 0); - - /* write 1 sector and set handler if remains */ - if (i > 0) { + if ((rem = __blk_end_request(req, 0, MG_SECTOR_SIZE))) { + /* write 1 sector and set handler if remains */ buff = (u16 *)req->buffer; for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) { outw(*buff, (unsigned long)host->dev_base + @@ -700,7 +649,7 @@ ok_to_write: /* send write confirm */ outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - if (!i) + if (!rem) mg_request(host->breq); } -- cgit v1.2.3-18-g5258 From 8a11a789c39cd6f61de4243234cf44a46c23ffd0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Apr 2009 13:06:16 +0900 Subject: mg_disk: fix dependency on libata Add local copies of ata_id_string() and ata_id_c_string() to mg_disk so there is no need for the driver to depend on ATA and SCSI. [ Impact: break dependency on libata by copying ata id string functions ] Cc: unsik Kim Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/Kconfig | 2 +- drivers/block/mg_disk.c | 44 ++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 41 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index ddea8e485cc..f42fa50d355 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -412,7 +412,7 @@ config ATA_OVER_ETH config MG_DISK tristate "mGine mflash, gflash support" - depends on ARM && ATA && GPIOLIB + depends on ARM && GPIOLIB help mGine mFlash(gFlash) block device driver diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 1a4cc968cfe..8e53cae9fa9 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include @@ -357,6 +357,42 @@ static irqreturn_t mg_irq(int irq, void *dev_id) return IRQ_HANDLED; } +/* local copy of ata_id_string() */ +static void mg_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned int c; + + BUG_ON(len & 1); + + while (len > 0) { + c = id[ofs] >> 8; + *s = c; + s++; + + c = id[ofs] & 0xff; + *s = c; + s++; + + ofs++; + len -= 2; + } +} + +/* local copy of ata_id_c_string() */ +static void mg_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + mg_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + static int mg_get_disk_id(struct mg_host *host) { u32 i; @@ -403,9 +439,9 @@ static int mg_get_disk_id(struct mg_host *host) host->n_sectors -= host->nres_sectors; } - ata_id_c_string(id, fwrev, ATA_ID_FW_REV, sizeof(fwrev)); - ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); - ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); + mg_id_c_string(id, fwrev, ATA_ID_FW_REV, sizeof(fwrev)); + mg_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); + mg_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); printk(KERN_INFO "mg_disk: model: %s\n", model); printk(KERN_INFO "mg_disk: firm: %.8s\n", fwrev); printk(KERN_INFO "mg_disk: serial: %s\n", serial); -- cgit v1.2.3-18-g5258 From f68adec3c7155a8bbf32a90cb4c4d0737df045d9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Apr 2009 13:06:17 +0900 Subject: mg_disk: use defines from While at it: - remove MG_REG_HEAD_MUST_BE_ON define - remove MG_REG_CTRL_INTR_ENABLE define - remove MG_REG_HEAD_LBA_MODE define - remove unused defines Cc: unsik Kim Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 144 +++++++++++++++--------------------------------- 1 file changed, 43 insertions(+), 101 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 8e53cae9fa9..71e56cc28ca 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -51,51 +51,10 @@ #define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) #define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) -/* "Drive Select/Head Register" bit values */ -#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ -#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) -#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) -#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) - - -/* "Device Control Register" bit values */ -#define MG_REG_CTRL_INTR_ENABLE 0x0 -#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) -#define MG_REG_CTRL_RESET (0x1<<2) -#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 -#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) -#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 -#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) -#define MG_REG_CTRL_DPD_DISABLE 0x0 -#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) - -/* Status register bit */ -/* error bit in status register */ -#define MG_REG_STATUS_BIT_ERROR 0x01 -/* corrected error in status register */ -#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 -/* data request bit in status register */ -#define MG_REG_STATUS_BIT_DATA_REQ 0x08 -/* DSC - Drive Seek Complete */ -#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 -/* DWF - Drive Write Fault */ -#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 -#define MG_REG_STATUS_BIT_READY 0x40 -#define MG_REG_STATUS_BIT_BUSY 0x80 - /* handy status */ -#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) -#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ - (MG_REG_STATUS_BIT_BUSY | \ - MG_REG_STATUS_BIT_WRITE_FAULT | \ - MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) - -/* Error register */ -#define MG_REG_ERR_AMNF 0x01 -#define MG_REG_ERR_ABRT 0x04 -#define MG_REG_ERR_IDNF 0x10 -#define MG_REG_ERR_UNC 0x40 -#define MG_REG_ERR_BBK 0x80 +#define MG_STAT_READY (ATA_DRDY | ATA_DSC) +#define MG_READY_OK(s) (((s) & (MG_STAT_READY | (ATA_BUSY | ATA_DF | \ + ATA_ERR))) == MG_STAT_READY) /* error code for others */ #define MG_ERR_NONE 0 @@ -225,41 +184,39 @@ static void mg_dump_status(const char *msg, unsigned int stat, } printk(KERN_ERR "%s: %s: status=0x%02x { ", name, msg, stat & 0xff); - if (stat & MG_REG_STATUS_BIT_BUSY) + if (stat & ATA_BUSY) printk("Busy "); - if (stat & MG_REG_STATUS_BIT_READY) + if (stat & ATA_DRDY) printk("DriveReady "); - if (stat & MG_REG_STATUS_BIT_WRITE_FAULT) + if (stat & ATA_DF) printk("WriteFault "); - if (stat & MG_REG_STATUS_BIT_SEEK_DONE) + if (stat & ATA_DSC) printk("SeekComplete "); - if (stat & MG_REG_STATUS_BIT_DATA_REQ) + if (stat & ATA_DRQ) printk("DataRequest "); - if (stat & MG_REG_STATUS_BIT_CORRECTED_ERROR) + if (stat & ATA_CORR) printk("CorrectedError "); - if (stat & MG_REG_STATUS_BIT_ERROR) + if (stat & ATA_ERR) printk("Error "); printk("}\n"); - if ((stat & MG_REG_STATUS_BIT_ERROR) == 0) { + if ((stat & ATA_ERR) == 0) { host->error = 0; } else { host->error = inb((unsigned long)host->dev_base + MG_REG_ERROR); printk(KERN_ERR "%s: %s: error=0x%02x { ", name, msg, host->error & 0xff); - if (host->error & MG_REG_ERR_BBK) + if (host->error & ATA_BBK) printk("BadSector "); - if (host->error & MG_REG_ERR_UNC) + if (host->error & ATA_UNC) printk("UncorrectableError "); - if (host->error & MG_REG_ERR_IDNF) + if (host->error & ATA_IDNF) printk("SectorIdNotFound "); - if (host->error & MG_REG_ERR_ABRT) + if (host->error & ATA_ABORTED) printk("DriveStatusError "); - if (host->error & MG_REG_ERR_AMNF) + if (host->error & ATA_AMNF) printk("AddrMarkNotFound "); printk("}"); - if (host->error & - (MG_REG_ERR_BBK | MG_REG_ERR_UNC | - MG_REG_ERR_IDNF | MG_REG_ERR_AMNF)) { + if (host->error & (ATA_BBK | ATA_UNC | ATA_IDNF | ATA_AMNF)) { if (host->breq) { req = elv_next_request(host->breq); if (req) @@ -284,12 +241,12 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec) do { cur_jiffies = jiffies; - if (status & MG_REG_STATUS_BIT_BUSY) { - if (expect == MG_REG_STATUS_BIT_BUSY) + if (status & ATA_BUSY) { + if (expect == ATA_BUSY) break; } else { /* Check the error condition! */ - if (status & MG_REG_STATUS_BIT_ERROR) { + if (status & ATA_ERR) { mg_dump_status("mg_wait", status, host); break; } @@ -298,8 +255,8 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec) if (MG_READY_OK(status)) break; - if (expect == MG_REG_STATUS_BIT_DATA_REQ) - if (status & MG_REG_STATUS_BIT_DATA_REQ) + if (expect == ATA_DRQ) + if (status & ATA_DRQ) break; } if (!msec) { @@ -404,12 +361,10 @@ static int mg_get_disk_id(struct mg_host *host) char serial[ATA_ID_SERNO_LEN + 1]; if (!prv_data->use_polling) - outb(MG_REG_CTRL_INTR_DISABLE, - (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); outb(MG_CMD_ID, (unsigned long)host->dev_base + MG_REG_COMMAND); - err = mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_RD_DRQ); + err = mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_RD_DRQ); if (err) return err; @@ -449,8 +404,7 @@ static int mg_get_disk_id(struct mg_host *host) host->n_sectors, host->nres_sectors); if (!prv_data->use_polling) - outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); return err; } @@ -464,7 +418,7 @@ static int mg_disk_init(struct mg_host *host) /* hdd rst low */ gpio_set_value(host->rst, 0); - err = mg_wait(host, MG_REG_STATUS_BIT_BUSY, MG_TMAX_RST_TO_BUSY); + err = mg_wait(host, ATA_BUSY, MG_TMAX_RST_TO_BUSY); if (err) return err; @@ -475,17 +429,14 @@ static int mg_disk_init(struct mg_host *host) return err; /* soft reset on */ - outb(MG_REG_CTRL_RESET | - (prv_data->use_polling ? MG_REG_CTRL_INTR_DISABLE : - MG_REG_CTRL_INTR_ENABLE), + outb(ATA_SRST | (prv_data->use_polling ? ATA_NIEN : 0), (unsigned long)host->dev_base + MG_REG_DRV_CTRL); - err = mg_wait(host, MG_REG_STATUS_BIT_BUSY, MG_TMAX_RST_TO_BUSY); + err = mg_wait(host, ATA_BUSY, MG_TMAX_RST_TO_BUSY); if (err) return err; /* soft reset off */ - outb(prv_data->use_polling ? MG_REG_CTRL_INTR_DISABLE : - MG_REG_CTRL_INTR_ENABLE, + outb(prv_data->use_polling ? ATA_NIEN : 0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); err = mg_wait(host, MG_STAT_READY, MG_TMAX_SWRST_TO_RDY); if (err) @@ -531,7 +482,7 @@ static unsigned int mg_out(struct mg_host *host, MG_REG_CYL_LOW); outb((u8)(sect_num >> 16), (unsigned long)host->dev_base + MG_REG_CYL_HIGH); - outb((u8)((sect_num >> 24) | MG_REG_HEAD_LBA_MODE), + outb((u8)((sect_num >> 24) | ATA_LBA | ATA_DEVICE_OBS), (unsigned long)host->dev_base + MG_REG_DRV_HEAD); outb(cmd, (unsigned long)host->dev_base + MG_REG_COMMAND); return MG_ERR_NONE; @@ -552,8 +503,8 @@ static void mg_read(struct request *req) do { u16 *buff = (u16 *)req->buffer; - if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, - MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) { + if (mg_wait(host, ATA_DRQ, + MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } @@ -583,8 +534,7 @@ static void mg_write(struct request *req) do { u16 *buff = (u16 *)req->buffer; - if (mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, - MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { + if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } @@ -606,11 +556,11 @@ static void mg_read_intr(struct mg_host *host) /* check status */ do { i = inb((unsigned long)host->dev_base + MG_REG_STATUS); - if (i & MG_REG_STATUS_BIT_BUSY) + if (i & ATA_BUSY) break; if (!MG_READY_OK(i)) break; - if (i & MG_REG_STATUS_BIT_DATA_REQ) + if (i & ATA_DRQ) goto ok_to_read; } while (0); mg_dump_status("mg_read_intr", i, host); @@ -655,11 +605,11 @@ static void mg_write_intr(struct mg_host *host) /* check status */ do { i = inb((unsigned long)host->dev_base + MG_REG_STATUS); - if (i & MG_REG_STATUS_BIT_BUSY) + if (i & ATA_BUSY) break; if (!MG_READY_OK(i)) break; - if ((req->nr_sectors <= 1) || (i & MG_REG_STATUS_BIT_DATA_REQ)) + if ((req->nr_sectors <= 1) || (i & ATA_DRQ)) goto ok_to_write; } while (0); mg_dump_status("mg_write_intr", i, host); @@ -752,18 +702,15 @@ static unsigned int mg_issue_req(struct request *req, break; case WRITE: /* TODO : handler */ - outb(MG_REG_CTRL_INTR_DISABLE, - (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); if (mg_out(host, sect_num, sect_cnt, MG_CMD_WR, &mg_write_intr) != MG_ERR_NONE) { mg_bad_rw_intr(host); return host->error; } del_timer(&host->timer); - mg_wait(host, MG_REG_STATUS_BIT_DATA_REQ, MG_TMAX_WAIT_WR_DRQ); - outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ); + outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); if (host->error) { mg_bad_rw_intr(host); return host->error; @@ -849,9 +796,7 @@ static int mg_suspend(struct platform_device *plat_dev, pm_message_t state) return -EIO; if (!prv_data->use_polling) - outb(MG_REG_CTRL_INTR_DISABLE, - (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(ATA_NIEN, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); outb(MG_CMD_SLEEP, (unsigned long)host->dev_base + MG_REG_COMMAND); /* wait until mflash deep sleep */ @@ -859,9 +804,7 @@ static int mg_suspend(struct platform_device *plat_dev, pm_message_t state) if (mg_wait(host, MG_STAT_READY, MG_TMAX_CONF_TO_CMD)) { if (!prv_data->use_polling) - outb(MG_REG_CTRL_INTR_ENABLE, - (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); return -EIO; } @@ -884,8 +827,7 @@ static int mg_resume(struct platform_device *plat_dev) return -EIO; if (!prv_data->use_polling) - outb(MG_REG_CTRL_INTR_ENABLE, (unsigned long)host->dev_base + - MG_REG_DRV_CTRL); + outb(0, (unsigned long)host->dev_base + MG_REG_DRV_CTRL); return 0; } -- cgit v1.2.3-18-g5258 From 5b644c7a218702668d7b610994e7dcbc3d4705d3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Apr 2009 08:17:54 +0000 Subject: clocksource: improve sh_cmt clocksource overflow handling This patch improves the sh_cmt clocksource handling. Currently the counter value is ignored in the case of overflow. With this patch the overflow flag is read before and after reading the counter, removing any counter value and overflow flag mismatch issues. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index c2475648961..d607ac2d516 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -111,16 +111,21 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, int *has_wrapped) { unsigned long v1, v2, v3; + int o1, o2; + + o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; /* Make sure the timer value is stable. Stolen from acpi_pm.c */ do { + o2 = o1; v1 = sh_cmt_read(p, CMCNT); v2 = sh_cmt_read(p, CMCNT); v3 = sh_cmt_read(p, CMCNT); - } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2))); + o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) + || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); - *has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit; + *has_wrapped = o1; return v2; } @@ -394,7 +399,7 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) raw = sh_cmt_get_counter(p, &has_wrapped); if (unlikely(has_wrapped)) - raw = p->match_value; + raw += p->match_value; spin_unlock_irqrestore(&p->lock, flags); return value + raw; -- cgit v1.2.3-18-g5258 From 8e0b842948156e3463879caed12b4ce51bed772e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Apr 2009 08:19:50 +0000 Subject: sh: setup timers in late_time_init() This patch moves the SuperH timer setup code from time_init() to late_time_init(). Good things about this change: - interrupts: they are enabled at late_time_init() - mm: regular kmalloc() can be used at late_time_init() Together with moving to late_time_init() this patch changes the sh_cmt driver to always allocate with kmalloc(). This simplifies the code a bit and also fixes section mismatches. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index d607ac2d516..bf3e4c11fd3 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -18,7 +18,6 @@ */ #include -#include #include #include #include @@ -645,11 +644,7 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) return 0; } - if (is_early_platform_device(pdev)) - p = alloc_bootmem(sizeof(*p)); - else - p = kmalloc(sizeof(*p), GFP_KERNEL); - + p = kmalloc(sizeof(*p), GFP_KERNEL); if (p == NULL) { dev_err(&pdev->dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -657,11 +652,7 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { - if (is_early_platform_device(pdev)) - free_bootmem(__pa(p), sizeof(*p)); - else - kfree(p); - + kfree(p); platform_set_drvdata(pdev, NULL); } return ret; -- cgit v1.2.3-18-g5258 From d5dedd4507d307eb3f35f21b6e16f336fdc0d82a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 17:59:21 -0700 Subject: irq: change ->set_affinity() to return status according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar --- drivers/parisc/iosapic.c | 6 ++++-- drivers/xen/events.c | 12 +++++++----- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 73348c4047e..4a9cc92d4d1 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -702,7 +702,7 @@ static unsigned int iosapic_startup_irq(unsigned int irq) } #ifdef CONFIG_SMP -static void iosapic_set_affinity_irq(unsigned int irq, +static int iosapic_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { struct vector_info *vi = iosapic_get_vector(irq); @@ -712,7 +712,7 @@ static void iosapic_set_affinity_irq(unsigned int irq, dest_cpu = cpu_check_affinity(irq, dest); if (dest_cpu < 0) - return; + return -1; cpumask_copy(irq_desc[irq].affinity, cpumask_of(dest_cpu)); vi->txn_addr = txn_affinity_addr(irq, dest_cpu); @@ -724,6 +724,8 @@ static void iosapic_set_affinity_irq(unsigned int irq, iosapic_set_irt_data(vi, &dummy_d0, &d1); iosapic_wr_irt_entry(vi, d0, d1); spin_unlock_irqrestore(&iosapic_lock, flags); + + return 0; } #endif diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 30963af5dba..33389880279 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -688,13 +688,13 @@ void rebind_evtchn_irq(int evtchn, int irq) } /* Rebind an evtchn so that it gets delivered to a specific cpu */ -static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) +static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu) { struct evtchn_bind_vcpu bind_vcpu; int evtchn = evtchn_from_irq(irq); if (!VALID_EVTCHN(evtchn)) - return; + return -1; /* Send future instances of this interrupt to other vcpu. */ bind_vcpu.port = evtchn; @@ -707,13 +707,15 @@ static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) */ if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0) bind_evtchn_to_cpu(evtchn, tcpu); -} + return 0; +} -static void set_affinity_irq(unsigned irq, const struct cpumask *dest) +static int set_affinity_irq(unsigned irq, const struct cpumask *dest) { unsigned tcpu = cpumask_first(dest); - rebind_irq_to_cpu(irq, tcpu); + + return rebind_irq_to_cpu(irq, tcpu); } int resend_irq_on_evtchn(unsigned int irq) -- cgit v1.2.3-18-g5258 From 85ac16d033370caf6f48d743c8dc8103700f5cc5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:00:38 -0700 Subject: x86/irq: change irq_desc_alloc() to take node instead of cpu This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: Jeremy Fitzhardinge LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/intr_remapping.c | 15 ++++++--------- drivers/xen/events.c | 2 +- 2 files changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f5e0ea724a6..9eff36a293e 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -23,15 +23,12 @@ struct irq_2_iommu { }; #ifdef CONFIG_GENERIC_HARDIRQS -static struct irq_2_iommu *get_one_free_irq_2_iommu(int cpu) +static struct irq_2_iommu *get_one_free_irq_2_iommu(int node) { struct irq_2_iommu *iommu; - int node; - - node = cpu_to_node(cpu); iommu = kzalloc_node(sizeof(*iommu), GFP_ATOMIC, node); - printk(KERN_DEBUG "alloc irq_2_iommu on cpu %d node %d\n", cpu, node); + printk(KERN_DEBUG "alloc irq_2_iommu on node %d\n", node); return iommu; } @@ -48,7 +45,7 @@ static struct irq_2_iommu *irq_2_iommu(unsigned int irq) return desc->irq_2_iommu; } -static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) +static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node) { struct irq_desc *desc; struct irq_2_iommu *irq_iommu; @@ -56,7 +53,7 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) /* * alloc irq desc if not allocated already. */ - desc = irq_to_desc_alloc_cpu(irq, cpu); + desc = irq_to_desc_alloc_node(irq, node); if (!desc) { printk(KERN_INFO "can not get irq_desc for %d\n", irq); return NULL; @@ -65,14 +62,14 @@ static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu) irq_iommu = desc->irq_2_iommu; if (!irq_iommu) - desc->irq_2_iommu = get_one_free_irq_2_iommu(cpu); + desc->irq_2_iommu = get_one_free_irq_2_iommu(node); return desc->irq_2_iommu; } static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq) { - return irq_2_iommu_alloc_cpu(irq, boot_cpu_id); + return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id)); } #else /* !CONFIG_SPARSE_IRQ */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 33389880279..be437c2bc94 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -335,7 +335,7 @@ static int find_unbound_irq(void) if (irq == nr_irqs) panic("No available IRQ to bind to: increase nr_irqs!\n"); - desc = irq_to_desc_alloc_cpu(irq, 0); + desc = irq_to_desc_alloc_node(irq, 0); if (WARN_ON(desc == NULL)) return -1; -- cgit v1.2.3-18-g5258 From a2f809b08ae4dddc1015c7dcd8659e5729e45b3e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:01:20 -0700 Subject: irq: change ACPI GSI APIs to also take a device argument We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu Acked-by: Len Brown Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell Cc: Len Brown Cc: Bjorn Helgaas Cc: Tony Luck Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar --- drivers/acpi/pci_irq.c | 5 +++-- drivers/char/hpet.c | 4 ++-- drivers/pnp/pnpacpi/rsparser.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 51b9f8280f8..2faa9e2ac89 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -401,7 +401,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev) /* Interrupt Line values above 0xF are forbidden */ if (dev->irq > 0 && (dev->irq <= 0xF)) { printk(" - using IRQ %d\n", dev->irq); - acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE, + acpi_register_gsi(&dev->dev, dev->irq, + ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); return 0; } else { @@ -410,7 +411,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev) } } - rc = acpi_register_gsi(gsi, triggering, polarity); + rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity); if (rc < 0) { dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n", pin_name(pin)); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 340ba4f9dc5..4a9f3492b92 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -224,7 +224,7 @@ static void hpet_timer_set_irq(struct hpet_dev *devp) break; } - gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE, + gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); if (gsi > 0) break; @@ -939,7 +939,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) irqp = &res->data.extended_irq; for (i = 0; i < irqp->interrupt_count; i++) { - irq = acpi_register_gsi(irqp->interrupts[i], + irq = acpi_register_gsi(NULL, irqp->interrupts[i], irqp->triggering, irqp->polarity); if (irq < 0) return AE_ERROR; diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index adf17856bac..7f207f335be 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -123,7 +123,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev, } flags = irq_flags(triggering, polarity, shareable); - irq = acpi_register_gsi(gsi, triggering, polarity); + irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity); if (irq >= 0) pcibios_penalize_isa_irq(irq, 1); else -- cgit v1.2.3-18-g5258 From 56b581ea9591b5767b1e0204c6a06c7d0c49396e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 27 Apr 2009 18:02:46 -0700 Subject: irq: make ht irq_desc more numa aware Try to get irq_desc on the same node as create_irq_nr(). [ Impact: optimization, make HT IRQs more NUMA-aware ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Suresh Siddha Cc: "Eric W. Biederman" Cc: Rusty Russell LKML-Reference: <49F655B6.8020109@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/htirq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c index bf7d6ce9bbb..4e9dd0fe274 100644 --- a/drivers/pci/htirq.c +++ b/drivers/pci/htirq.c @@ -98,6 +98,7 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) int max_irq; int pos; int irq; + int node; pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ); if (!pos) @@ -125,7 +126,8 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) cfg->msg.address_lo = 0xffffffff; cfg->msg.address_hi = 0xffffffff; - irq = create_irq(); + node = dev_to_node(&dev->dev); + irq = create_irq_nr(0, node); if (irq <= 0) { kfree(cfg); -- cgit v1.2.3-18-g5258 From 3014f47460ecfb13d4169daae51f26a20bacfa17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 29 Apr 2009 14:50:37 +0000 Subject: clocksource: sh_cmt 16-bit fixes This patch contains various fixes for 16-bit cmt hardware. With this applied periodic clockevents work fine on sh7203. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index bf3e4c11fd3..4ff1508e5ab 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -158,16 +158,18 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk); return ret; } - *rate = clk_get_rate(p->clk) / 8; /* make sure channel is disabled */ sh_cmt_start_stop_ch(p, 0); /* configure channel, periodic mode and maximum timeout */ - if (p->width == 16) - sh_cmt_write(p, CMCSR, 0); - else + if (p->width == 16) { + *rate = clk_get_rate(p->clk) / 512; + sh_cmt_write(p, CMCSR, 0x43); + } else { + *rate = clk_get_rate(p->clk) / 8; sh_cmt_write(p, CMCSR, 0x01a4); + } sh_cmt_write(p, CMCOR, 0xffffffff); sh_cmt_write(p, CMCNT, 0); @@ -615,7 +617,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) if (resource_size(res) == 6) { p->width = 16; p->overflow_bit = 0x80; - p->clear_bits = ~0xc0; + p->clear_bits = ~0x80; } else { p->width = 32; p->overflow_bit = 0x8000; -- cgit v1.2.3-18-g5258 From 03682411b1ccd38cbde2e9a6ab43884ff34fbefc Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 30 Apr 2009 18:38:01 +0200 Subject: alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC Some time ago we had to disable init_hwif callback for PowerPC builds. That was because of a historical IRQ overwrite in the driver, which was causing IDE malfunction on the MPC8610HPCD PowerPC boards. It's unclear whether this overwrite is still useful, but it is proven to cause a bit of harm, and today some PowerPC targets (Xilinx ML510, as reported by Roderick Colenbrander) need the init_hwif, so we have to re-enable it and remove the overwrite. Reported-by: Roderick Colenbrander Suggested-by: Bartlomiej Zolnierkiewicz Cc: Benjamin Herrenschmidt Signed-off-by: Anton Vorontsov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/alim15x3.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 537da1cde16..e59b6dee9ae 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -402,27 +402,23 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) return cbl; } -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure * * Obtain the IRQ tables for an ALi based IDE solution on the PC * class platforms. This part of the code isn't applicable to the - * Sparc and PowerPC systems. + * Sparc systems. */ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); u8 ideic, inmir; s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; int irq = -1; - if (dev->device == PCI_DEVICE_ID_AL_M5229) - hwif->irq = hwif->channel ? 15 : 14; - if (isa_dev) { /* * read IDE interface control @@ -455,7 +451,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) } #else #define init_hwif_ali15x3 NULL -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ +#endif /* CONFIG_SPARC64 */ /** * init_dma_ali15x3 - set up DMA on ALi15x3 -- cgit v1.2.3-18-g5258 From d5ed4c2e5ce9f5f6fd6a5a39ee1196a1f8a46eed Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Apr 2009 07:02:49 +0000 Subject: clocksource: SuperH MTU2 Timer driver This patch adds a MTU2 driver for the SuperH architecture. The MTU2 driver is a platform driver with early platform support to allow using a MTU2 channel as only clockevent during system bootup. Clocksource on sh2a is currently unsupported due to code generation issues with 64-bit math, so at this point only periodic clockevent support is in place. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/Makefile | 1 + drivers/clocksource/sh_mtu2.c | 357 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 358 insertions(+) create mode 100644 drivers/clocksource/sh_mtu2.c (limited to 'drivers') diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 1efb2879a94..9785586dc8c 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o +obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c new file mode 100644 index 00000000000..420566f4c50 --- /dev/null +++ b/drivers/clocksource/sh_mtu2.c @@ -0,0 +1,357 @@ +/* + * SuperH Timer Support - MTU2 + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct sh_mtu2_priv { + void __iomem *mapbase; + struct clk *clk; + struct irqaction irqaction; + struct platform_device *pdev; + unsigned long rate; + unsigned long periodic; + struct clock_event_device ced; +}; + +static DEFINE_SPINLOCK(sh_mtu2_lock); + +#define TSTR -1 /* shared register */ +#define TCR 0 /* channel register */ +#define TMDR 1 /* channel register */ +#define TIOR 2 /* channel register */ +#define TIER 3 /* channel register */ +#define TSR 4 /* channel register */ +#define TCNT 5 /* channel register */ +#define TGR 6 /* channel register */ + +static unsigned long mtu2_reg_offs[] = { + [TCR] = 0, + [TMDR] = 1, + [TIOR] = 2, + [TIER] = 4, + [TSR] = 5, + [TCNT] = 6, + [TGR] = 8, +}; + +static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) + return ioread8(base + cfg->channel_offset); + + offs = mtu2_reg_offs[reg_nr]; + + if ((reg_nr == TCNT) || (reg_nr == TGR)) + return ioread16(base + offs); + else + return ioread8(base + offs); +} + +static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, + unsigned long value) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) { + iowrite8(value, base + cfg->channel_offset); + return; + } + + offs = mtu2_reg_offs[reg_nr]; + + if ((reg_nr == TCNT) || (reg_nr == TGR)) + iowrite16(value, base + offs); + else + iowrite8(value, base + offs); +} + +static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + unsigned long flags, value; + + /* start stop register shared by multiple timer channels */ + spin_lock_irqsave(&sh_mtu2_lock, flags); + value = sh_mtu2_read(p, TSTR); + + if (start) + value |= 1 << cfg->timer_bit; + else + value &= ~(1 << cfg->timer_bit); + + sh_mtu2_write(p, TSTR, value); + spin_unlock_irqrestore(&sh_mtu2_lock, flags); +} + +static int sh_mtu2_enable(struct sh_mtu2_priv *p) +{ + struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + int ret; + + /* enable clock */ + ret = clk_enable(p->clk); + if (ret) { + pr_err("sh_mtu2: cannot enable clock \"%s\"\n", cfg->clk); + return ret; + } + + /* make sure channel is disabled */ + sh_mtu2_start_stop_ch(p, 0); + + p->rate = clk_get_rate(p->clk) / 64; + p->periodic = (p->rate + HZ/2) / HZ; + + /* "Periodic Counter Operation" */ + sh_mtu2_write(p, TCR, 0x23); /* TGRA clear, divide clock by 64 */ + sh_mtu2_write(p, TIOR, 0); + sh_mtu2_write(p, TGR, p->periodic); + sh_mtu2_write(p, TCNT, 0); + sh_mtu2_write(p, TMDR, 0); + sh_mtu2_write(p, TIER, 0x01); + + /* enable channel */ + sh_mtu2_start_stop_ch(p, 1); + + return 0; +} + +static void sh_mtu2_disable(struct sh_mtu2_priv *p) +{ + /* disable channel */ + sh_mtu2_start_stop_ch(p, 0); + + /* stop clock */ + clk_disable(p->clk); +} + +static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id) +{ + struct sh_mtu2_priv *p = dev_id; + + /* acknowledge interrupt */ + sh_mtu2_read(p, TSR); + sh_mtu2_write(p, TSR, 0xfe); + + /* notify clockevent layer */ + p->ced.event_handler(&p->ced); + return IRQ_HANDLED; +} + +static struct sh_mtu2_priv *ced_to_sh_mtu2(struct clock_event_device *ced) +{ + return container_of(ced, struct sh_mtu2_priv, ced); +} + +static void sh_mtu2_clock_event_mode(enum clock_event_mode mode, + struct clock_event_device *ced) +{ + struct sh_mtu2_priv *p = ced_to_sh_mtu2(ced); + int disabled = 0; + + /* deal with old setting first */ + switch (ced->mode) { + case CLOCK_EVT_MODE_PERIODIC: + sh_mtu2_disable(p); + disabled = 1; + break; + default: + break; + } + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("sh_mtu2: %s used for periodic clock events\n", + ced->name); + sh_mtu2_enable(p); + break; + case CLOCK_EVT_MODE_UNUSED: + if (!disabled) + sh_mtu2_disable(p); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } +} + +static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, + char *name, unsigned long rating) +{ + struct clock_event_device *ced = &p->ced; + int ret; + + memset(ced, 0, sizeof(*ced)); + + ced->name = name; + ced->features = CLOCK_EVT_FEAT_PERIODIC; + ced->rating = rating; + ced->cpumask = cpumask_of(0); + ced->set_mode = sh_mtu2_clock_event_mode; + + ret = setup_irq(p->irqaction.irq, &p->irqaction); + if (ret) { + pr_err("sh_mtu2: failed to request irq %d\n", + p->irqaction.irq); + return; + } + + pr_info("sh_mtu2: %s used for clock events\n", ced->name); + clockevents_register_device(ced); +} + +int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, + unsigned long clockevent_rating) +{ + if (clockevent_rating) + sh_mtu2_register_clockevent(p, name, clockevent_rating); + + return 0; +} + +static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) +{ + struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct resource *res; + int irq, ret; + ret = -ENXIO; + + memset(p, 0, sizeof(*p)); + p->pdev = pdev; + + if (!cfg) { + dev_err(&p->pdev->dev, "missing platform data\n"); + goto err0; + } + + platform_set_drvdata(pdev, p); + + res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&p->pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(p->pdev, 0); + if (irq < 0) { + dev_err(&p->pdev->dev, "failed to get irq\n"); + goto err0; + } + + /* map memory, let mapbase point to our channel */ + p->mapbase = ioremap_nocache(res->start, resource_size(res)); + if (p->mapbase == NULL) { + pr_err("sh_mtu2: failed to remap I/O memory\n"); + goto err0; + } + + /* setup data for setup_irq() (too early for request_irq()) */ + p->irqaction.name = cfg->name; + p->irqaction.handler = sh_mtu2_interrupt; + p->irqaction.dev_id = p; + p->irqaction.irq = irq; + p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; + p->irqaction.mask = CPU_MASK_NONE; + + /* get hold of clock */ + p->clk = clk_get(&p->pdev->dev, cfg->clk); + if (IS_ERR(p->clk)) { + pr_err("sh_mtu2: cannot get clock \"%s\"\n", cfg->clk); + ret = PTR_ERR(p->clk); + goto err1; + } + + return sh_mtu2_register(p, cfg->name, cfg->clockevent_rating); + err1: + iounmap(p->mapbase); + err0: + return ret; +} + +static int __devinit sh_mtu2_probe(struct platform_device *pdev) +{ + struct sh_mtu2_priv *p = platform_get_drvdata(pdev); + struct sh_mtu2_config *cfg = pdev->dev.platform_data; + int ret; + + if (p) { + pr_info("sh_mtu2: %s kept as earlytimer\n", cfg->name); + return 0; + } + + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + ret = sh_mtu2_setup(p, pdev); + if (ret) { + kfree(p); + platform_set_drvdata(pdev, NULL); + } + return ret; +} + +static int __devexit sh_mtu2_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent */ +} + +static struct platform_driver sh_mtu2_device_driver = { + .probe = sh_mtu2_probe, + .remove = __devexit_p(sh_mtu2_remove), + .driver = { + .name = "sh_mtu2", + } +}; + +static int __init sh_mtu2_init(void) +{ + return platform_driver_register(&sh_mtu2_device_driver); +} + +static void __exit sh_mtu2_exit(void) +{ + platform_driver_unregister(&sh_mtu2_device_driver); +} + +early_platform_init("earlytimer", &sh_mtu2_device_driver); +module_init(sh_mtu2_init); +module_exit(sh_mtu2_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH MTU2 Timer Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-18-g5258 From 9570ef20423b549757aa484ad388f9a7d5bdc4d9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 1 May 2009 06:51:00 +0000 Subject: clocksource: SuperH TMU Timer driver This patch adds a TMU driver for the SuperH architecture. The TMU driver is a platform driver with early platform support to allow using a TMU channel as clockevent or clocksource during system bootup or later. Clocksource or clockevent can be selected. Both periodic and oneshot clockevents are supported. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/Makefile | 1 + drivers/clocksource/sh_tmu.c | 461 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 462 insertions(+) create mode 100644 drivers/clocksource/sh_tmu.c (limited to 'drivers') diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 9785586dc8c..eef216f7f61 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o +obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c new file mode 100644 index 00000000000..21bd77aa6a3 --- /dev/null +++ b/drivers/clocksource/sh_tmu.c @@ -0,0 +1,461 @@ +/* + * SuperH Timer Support - TMU + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct sh_tmu_priv { + void __iomem *mapbase; + struct clk *clk; + struct irqaction irqaction; + struct platform_device *pdev; + unsigned long rate; + unsigned long periodic; + struct clock_event_device ced; + struct clocksource cs; +}; + +static DEFINE_SPINLOCK(sh_tmu_lock); + +#define TSTR -1 /* shared register */ +#define TCOR 0 /* channel register */ +#define TCNT 1 /* channel register */ +#define TCR 2 /* channel register */ + +static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) + return ioread8(base - cfg->channel_offset); + + offs = reg_nr << 2; + + if (reg_nr == TCR) + return ioread16(base + offs); + else + return ioread32(base + offs); +} + +static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, + unsigned long value) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + void __iomem *base = p->mapbase; + unsigned long offs; + + if (reg_nr == TSTR) { + iowrite8(value, base - cfg->channel_offset); + return; + } + + offs = reg_nr << 2; + + if (reg_nr == TCR) + iowrite16(value, base + offs); + else + iowrite32(value, base + offs); +} + +static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + unsigned long flags, value; + + /* start stop register shared by multiple timer channels */ + spin_lock_irqsave(&sh_tmu_lock, flags); + value = sh_tmu_read(p, TSTR); + + if (start) + value |= 1 << cfg->timer_bit; + else + value &= ~(1 << cfg->timer_bit); + + sh_tmu_write(p, TSTR, value); + spin_unlock_irqrestore(&sh_tmu_lock, flags); +} + +static int sh_tmu_enable(struct sh_tmu_priv *p) +{ + struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + int ret; + + /* enable clock */ + ret = clk_enable(p->clk); + if (ret) { + pr_err("sh_tmu: cannot enable clock \"%s\"\n", cfg->clk); + return ret; + } + + /* make sure channel is disabled */ + sh_tmu_start_stop_ch(p, 0); + + /* maximum timeout */ + sh_tmu_write(p, TCOR, 0xffffffff); + sh_tmu_write(p, TCNT, 0xffffffff); + + /* configure channel to parent clock / 4, irq off */ + p->rate = clk_get_rate(p->clk) / 4; + sh_tmu_write(p, TCR, 0x0000); + + /* enable channel */ + sh_tmu_start_stop_ch(p, 1); + + return 0; +} + +static void sh_tmu_disable(struct sh_tmu_priv *p) +{ + /* disable channel */ + sh_tmu_start_stop_ch(p, 0); + + /* stop clock */ + clk_disable(p->clk); +} + +static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, + int periodic) +{ + /* stop timer */ + sh_tmu_start_stop_ch(p, 0); + + /* acknowledge interrupt */ + sh_tmu_read(p, TCR); + + /* enable interrupt */ + sh_tmu_write(p, TCR, 0x0020); + + /* reload delta value in case of periodic timer */ + if (periodic) + sh_tmu_write(p, TCOR, delta); + else + sh_tmu_write(p, TCOR, 0); + + sh_tmu_write(p, TCNT, delta); + + /* start timer */ + sh_tmu_start_stop_ch(p, 1); +} + +static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id) +{ + struct sh_tmu_priv *p = dev_id; + + /* disable or acknowledge interrupt */ + if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) + sh_tmu_write(p, TCR, 0x0000); + else + sh_tmu_write(p, TCR, 0x0020); + + /* notify clockevent layer */ + p->ced.event_handler(&p->ced); + return IRQ_HANDLED; +} + +static struct sh_tmu_priv *cs_to_sh_tmu(struct clocksource *cs) +{ + return container_of(cs, struct sh_tmu_priv, cs); +} + +static cycle_t sh_tmu_clocksource_read(struct clocksource *cs) +{ + struct sh_tmu_priv *p = cs_to_sh_tmu(cs); + + return sh_tmu_read(p, TCNT) ^ 0xffffffff; +} + +static int sh_tmu_clocksource_enable(struct clocksource *cs) +{ + struct sh_tmu_priv *p = cs_to_sh_tmu(cs); + int ret; + + ret = sh_tmu_enable(p); + if (ret) + return ret; + + /* TODO: calculate good shift from rate and counter bit width */ + cs->shift = 10; + cs->mult = clocksource_hz2mult(p->rate, cs->shift); + return 0; +} + +static void sh_tmu_clocksource_disable(struct clocksource *cs) +{ + sh_tmu_disable(cs_to_sh_tmu(cs)); +} + +static int sh_tmu_register_clocksource(struct sh_tmu_priv *p, + char *name, unsigned long rating) +{ + struct clocksource *cs = &p->cs; + + cs->name = name; + cs->rating = rating; + cs->read = sh_tmu_clocksource_read; + cs->enable = sh_tmu_clocksource_enable; + cs->disable = sh_tmu_clocksource_disable; + cs->mask = CLOCKSOURCE_MASK(32); + cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; + pr_info("sh_tmu: %s used as clock source\n", cs->name); + clocksource_register(cs); + return 0; +} + +static struct sh_tmu_priv *ced_to_sh_tmu(struct clock_event_device *ced) +{ + return container_of(ced, struct sh_tmu_priv, ced); +} + +static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic) +{ + struct clock_event_device *ced = &p->ced; + + sh_tmu_enable(p); + + /* TODO: calculate good shift from rate and counter bit width */ + + ced->shift = 32; + ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); + ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced); + ced->min_delta_ns = 5000; + + if (periodic) { + p->periodic = (p->rate + HZ/2) / HZ; + sh_tmu_set_next(p, p->periodic, 1); + } +} + +static void sh_tmu_clock_event_mode(enum clock_event_mode mode, + struct clock_event_device *ced) +{ + struct sh_tmu_priv *p = ced_to_sh_tmu(ced); + int disabled = 0; + + /* deal with old setting first */ + switch (ced->mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + sh_tmu_disable(p); + disabled = 1; + break; + default: + break; + } + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + pr_info("sh_tmu: %s used for periodic clock events\n", + ced->name); + sh_tmu_clock_event_start(p, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + pr_info("sh_tmu: %s used for oneshot clock events\n", + ced->name); + sh_tmu_clock_event_start(p, 0); + break; + case CLOCK_EVT_MODE_UNUSED: + if (!disabled) + sh_tmu_disable(p); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } +} + +static int sh_tmu_clock_event_next(unsigned long delta, + struct clock_event_device *ced) +{ + struct sh_tmu_priv *p = ced_to_sh_tmu(ced); + + BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT); + + /* program new delta value */ + sh_tmu_set_next(p, delta, 0); + return 0; +} + +static void sh_tmu_register_clockevent(struct sh_tmu_priv *p, + char *name, unsigned long rating) +{ + struct clock_event_device *ced = &p->ced; + int ret; + + memset(ced, 0, sizeof(*ced)); + + ced->name = name; + ced->features = CLOCK_EVT_FEAT_PERIODIC; + ced->features |= CLOCK_EVT_FEAT_ONESHOT; + ced->rating = rating; + ced->cpumask = cpumask_of(0); + ced->set_next_event = sh_tmu_clock_event_next; + ced->set_mode = sh_tmu_clock_event_mode; + + ret = setup_irq(p->irqaction.irq, &p->irqaction); + if (ret) { + pr_err("sh_tmu: failed to request irq %d\n", + p->irqaction.irq); + return; + } + + pr_info("sh_tmu: %s used for clock events\n", ced->name); + clockevents_register_device(ced); +} + +static int sh_tmu_register(struct sh_tmu_priv *p, char *name, + unsigned long clockevent_rating, + unsigned long clocksource_rating) +{ + if (clockevent_rating) + sh_tmu_register_clockevent(p, name, clockevent_rating); + else if (clocksource_rating) + sh_tmu_register_clocksource(p, name, clocksource_rating); + + return 0; +} + +static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) +{ + struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct resource *res; + int irq, ret; + ret = -ENXIO; + + memset(p, 0, sizeof(*p)); + p->pdev = pdev; + + if (!cfg) { + dev_err(&p->pdev->dev, "missing platform data\n"); + goto err0; + } + + platform_set_drvdata(pdev, p); + + res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&p->pdev->dev, "failed to get I/O memory\n"); + goto err0; + } + + irq = platform_get_irq(p->pdev, 0); + if (irq < 0) { + dev_err(&p->pdev->dev, "failed to get irq\n"); + goto err0; + } + + /* map memory, let mapbase point to our channel */ + p->mapbase = ioremap_nocache(res->start, resource_size(res)); + if (p->mapbase == NULL) { + pr_err("sh_tmu: failed to remap I/O memory\n"); + goto err0; + } + + /* setup data for setup_irq() (too early for request_irq()) */ + p->irqaction.name = cfg->name; + p->irqaction.handler = sh_tmu_interrupt; + p->irqaction.dev_id = p; + p->irqaction.irq = irq; + p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; + p->irqaction.mask = CPU_MASK_NONE; + + /* get hold of clock */ + p->clk = clk_get(&p->pdev->dev, cfg->clk); + if (IS_ERR(p->clk)) { + pr_err("sh_tmu: cannot get clock \"%s\"\n", cfg->clk); + ret = PTR_ERR(p->clk); + goto err1; + } + + return sh_tmu_register(p, cfg->name, + cfg->clockevent_rating, + cfg->clocksource_rating); + err1: + iounmap(p->mapbase); + err0: + return ret; +} + +static int __devinit sh_tmu_probe(struct platform_device *pdev) +{ + struct sh_tmu_priv *p = platform_get_drvdata(pdev); + struct sh_tmu_config *cfg = pdev->dev.platform_data; + int ret; + + if (p) { + pr_info("sh_tmu: %s kept as earlytimer\n", cfg->name); + return 0; + } + + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + ret = sh_tmu_setup(p, pdev); + if (ret) { + kfree(p); + platform_set_drvdata(pdev, NULL); + } + return ret; +} + +static int __devexit sh_tmu_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent and clocksource */ +} + +static struct platform_driver sh_tmu_device_driver = { + .probe = sh_tmu_probe, + .remove = __devexit_p(sh_tmu_remove), + .driver = { + .name = "sh_tmu", + } +}; + +static int __init sh_tmu_init(void) +{ + return platform_driver_register(&sh_tmu_device_driver); +} + +static void __exit sh_tmu_exit(void) +{ + platform_driver_unregister(&sh_tmu_device_driver); +} + +early_platform_init("earlytimer", &sh_tmu_device_driver); +module_init(sh_tmu_init); +module_exit(sh_tmu_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("SuperH TMU Timer Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-18-g5258 From 46a12f7426d71cabc08972cf8d3ffdd441d26a3a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 17:57:17 +0900 Subject: sh: Consolidate MTU2/CMT/TMU timer platform data. All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 14 +++++++------- drivers/clocksource/sh_mtu2.c | 14 +++++++------- drivers/clocksource/sh_tmu.c | 14 +++++++------- 3 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 4ff1508e5ab..aeb8c9b27b5 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include struct sh_cmt_priv { void __iomem *mapbase; @@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(sh_cmt_lock); static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -83,7 +83,7 @@ static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, unsigned long value) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -131,7 +131,7 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -149,7 +149,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { - struct sh_cmt_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -560,7 +560,7 @@ int sh_cmt_register(struct sh_cmt_priv *p, char *name, static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) { - struct sh_cmt_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -638,7 +638,7 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) static int __devinit sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); - struct sh_cmt_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 420566f4c50..ef02185a827 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include struct sh_mtu2_priv { void __iomem *mapbase; @@ -63,7 +63,7 @@ static unsigned long mtu2_reg_offs[] = { static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -81,7 +81,7 @@ static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr) static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, unsigned long value) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -100,7 +100,7 @@ static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr, static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -118,7 +118,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start) static int sh_mtu2_enable(struct sh_mtu2_priv *p) { - struct sh_mtu2_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -243,7 +243,7 @@ int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) { - struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -303,7 +303,7 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev) static int __devinit sh_mtu2_probe(struct platform_device *pdev) { struct sh_mtu2_priv *p = platform_get_drvdata(pdev); - struct sh_mtu2_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 21bd77aa6a3..d6ea4398bf6 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include struct sh_tmu_priv { void __iomem *mapbase; @@ -51,7 +51,7 @@ static DEFINE_SPINLOCK(sh_tmu_lock); static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -69,7 +69,7 @@ static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr) static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, unsigned long value) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; void __iomem *base = p->mapbase; unsigned long offs; @@ -88,7 +88,7 @@ static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr, static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -106,7 +106,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start) static int sh_tmu_enable(struct sh_tmu_priv *p) { - struct sh_tmu_config *cfg = p->pdev->dev.platform_data; + struct sh_timer_config *cfg = p->pdev->dev.platform_data; int ret; /* enable clock */ @@ -345,7 +345,7 @@ static int sh_tmu_register(struct sh_tmu_priv *p, char *name, static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) { - struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; @@ -407,7 +407,7 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev) static int __devinit sh_tmu_probe(struct platform_device *pdev) { struct sh_tmu_priv *p = platform_get_drvdata(pdev); - struct sh_tmu_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg = pdev->dev.platform_data; int ret; if (p) { -- cgit v1.2.3-18-g5258 From d1fcc0a8db5e47c1abaa783a3e83dbf5f2184969 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 3 May 2009 18:05:42 +0900 Subject: clocksource: sh_mtu2/cmt_register() should be static. Neither of these need to be exported, so just make them static. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 6 +++--- drivers/clocksource/sh_mtu2.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index aeb8c9b27b5..cf56a2af5fe 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -537,9 +537,9 @@ static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, clockevents_register_device(ced); } -int sh_cmt_register(struct sh_cmt_priv *p, char *name, - unsigned long clockevent_rating, - unsigned long clocksource_rating) +static int sh_cmt_register(struct sh_cmt_priv *p, char *name, + unsigned long clockevent_rating, + unsigned long clocksource_rating) { if (p->width == (sizeof(p->max_match_value) * 8)) p->max_match_value = ~0; diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index ef02185a827..d1ae75454d1 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -232,8 +232,8 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p, clockevents_register_device(ced); } -int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, - unsigned long clockevent_rating) +static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name, + unsigned long clockevent_rating) { if (clockevent_rating) sh_mtu2_register_clockevent(p, name, clockevent_rating); -- cgit v1.2.3-18-g5258 From 22a7c31a9659deaddafbbcec6562d44141e84474 Mon Sep 17 00:00:00 2001 From: "Alan D. Brunelle" Date: Mon, 4 May 2009 16:35:08 -0400 Subject: blktrace: from-sector redundant in trace_block_remap Remove redundant from-sector parameter: it's /always/ the bio's sector passed in. [ Impact: cleanup ] Signed-off-by: Alan D. Brunelle Reviewed-by: Li Zefan Reviewed-by: KOSAKI Motohiro Cc: Jens Axboe Cc: Arnaldo Carvalho de Melo LKML-Reference: <49FF517C.7000503@hp.com> Signed-off-by: Ingo Molnar --- drivers/md/dm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 8a994be035b..b01514afb6b 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -657,8 +657,7 @@ static void __map_bio(struct dm_target *ti, struct bio *clone, /* the bio has been remapped so dispatch it */ trace_block_remap(bdev_get_queue(clone->bi_bdev), clone, - tio->io->bio->bi_bdev->bd_dev, - clone->bi_sector, sector); + tio->io->bio->bi_bdev->bd_dev, sector); generic_make_request(clone); } else if (r < 0 || r == DM_MAPIO_REQUEUE) { -- cgit v1.2.3-18-g5258 From 0fb849b9d743a20056f2418cd955e5c650658663 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 7 May 2009 18:10:27 +0900 Subject: sh: Integrate the SH-5 onchip_remap() more coherently. Presently this is special-cased for early initialization. While there are situations where these static early initializations are still necessary, with minor changes it is possible to use this for the regular ioremap implementation as well. This allows us to kill off the special-casing for the remap completely and to start tidying up all of the SH-5 special-casing in drivers. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index dbf5357a77b..728d6a062bf 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -985,13 +985,7 @@ static void sci_config_port(struct uart_port *port, int flags) port->type = s->type; if (port->flags & UPF_IOREMAP && !port->membase) { -#if defined(CONFIG_SUPERH64) - port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); - port->membase = (void __iomem *)port->mapbase; -#else port->membase = ioremap_nocache(port->mapbase, 0x40); -#endif - dev_err(port->dev, "can't remap port#%d\n", port->line); } } -- cgit v1.2.3-18-g5258 From 54f2c841fa0007e5fee3b7d01a911c774f0a6cda Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 7 May 2009 17:28:59 +0200 Subject: oprofile: fix cpu buffer size The unit of oprofile_cpu_buffer_size is in samples, but was allocated in bytes. This led to the allocation of too small cpu buffers. This patch recalculates the buffer size in bytes taking also the ring_buffer_event header size into account. Reported-by: Suravee Suthikulpanit Signed-off-by: Robert Richter --- drivers/oprofile/cpu_buffer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index f0e99d4c066..242257b1944 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -78,16 +78,20 @@ void free_cpu_buffers(void) op_ring_buffer_write = NULL; } +#define RB_EVENT_HDR_SIZE 4 + int alloc_cpu_buffers(void) { int i; unsigned long buffer_size = oprofile_cpu_buffer_size; + unsigned long byte_size = buffer_size * (sizeof(struct op_sample) + + RB_EVENT_HDR_SIZE); - op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_read) goto fail; - op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_write) goto fail; -- cgit v1.2.3-18-g5258 From e552de2413edad1a7b0c7f82a2f2753e4f905d93 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:42 +0000 Subject: sh-sci: add platform device private data This patch adds per-platform private data to the sh-sci driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 127 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 85 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 728d6a062bf..af5da110d52 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -47,6 +47,7 @@ #include #include #include +#include #ifdef CONFIG_SUPERH #include @@ -77,6 +78,16 @@ struct sci_port { #ifdef CONFIG_HAVE_CLK /* Port clock */ struct clk *clk; +#endif + struct list_head node; +}; + +struct sh_sci_priv { + spinlock_t lock; + struct list_head ports; + +#ifdef CONFIG_HAVE_CLK + struct notifier_block clk_nb; #endif }; @@ -726,19 +737,22 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) { - int i; + struct sh_sci_priv *priv = container_of(self, + struct sh_sci_priv, clk_nb); + struct sci_port *sci_port; + unsigned long flags; if ((phase == CPUFREQ_POSTCHANGE) || - (phase == CPUFREQ_RESUMECHANGE)) - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *s = &sci_ports[i]; - s->port.uartclk = clk_get_rate(s->clk); - } + (phase == CPUFREQ_RESUMECHANGE)) { + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(sci_port, &priv->ports, node) + sci_port->port.uartclk = clk_get_rate(sci_port->clk); + + spin_unlock_irqrestore(&priv->lock, flags); + } return NOTIFY_OK; } - -static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 }; #endif static int sci_request_irq(struct sci_port *port) @@ -1201,6 +1215,27 @@ static struct uart_driver sci_uart_driver = { .cons = SCI_CONSOLE, }; + +static int __devexit sci_remove(struct platform_device *dev) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + +#ifdef CONFIG_HAVE_CLK + cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); +#endif + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_remove_one_port(&sci_uart_driver, &p->port); + + spin_unlock_irqrestore(&priv->lock, flags); + + kfree(priv); + return 0; +} + /* * Register a set of serial devices attached to a platform device. The * list is terminated with a zero flags entry, which means we expect @@ -1210,7 +1245,22 @@ static struct uart_driver sci_uart_driver = { static int __devinit sci_probe(struct platform_device *dev) { struct plat_sci_port *p = dev->dev.platform_data; + struct sh_sci_priv *priv; int i, ret = -EINVAL; + unsigned long flags; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_LIST_HEAD(&priv->ports); + spin_lock_init(&priv->lock); + platform_set_drvdata(dev, priv); + +#ifdef CONFIG_HAVE_CLK + priv->clk_nb.notifier_call = sci_notifier; + cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); +#endif for (i = 0; p && p->flags != 0; p++, i++) { struct sci_port *sciport = &sci_ports[i]; @@ -1254,12 +1304,19 @@ static int __devinit sci_probe(struct platform_device *dev) memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); - uart_add_one_port(&sci_uart_driver, &sciport->port); - } + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); -#ifdef CONFIG_HAVE_CLK - cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); -#endif + if (ret && (p->flags & UPF_IOREMAP)) { + iounmap(p->membase); + goto err_unreg; + } + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + } #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); @@ -1268,50 +1325,36 @@ static int __devinit sci_probe(struct platform_device *dev) return 0; err_unreg: - for (i = i - 1; i >= 0; i--) - uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); - + sci_remove(dev); return ret; } -static int __devexit sci_remove(struct platform_device *dev) -{ - int i; - -#ifdef CONFIG_HAVE_CLK - cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); -#endif - - for (i = 0; i < SCI_NPORTS; i++) - uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); - - return 0; -} - static int sci_suspend(struct platform_device *dev, pm_message_t state) { - int i; + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *p = &sci_ports[i]; + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_suspend_port(&sci_uart_driver, &p->port); - if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) - uart_suspend_port(&sci_uart_driver, &p->port); - } + spin_unlock_irqrestore(&priv->lock, flags); return 0; } static int sci_resume(struct platform_device *dev) { - int i; + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; - for (i = 0; i < SCI_NPORTS; i++) { - struct sci_port *p = &sci_ports[i]; + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_resume_port(&sci_uart_driver, &p->port); - if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) - uart_resume_port(&sci_uart_driver, &p->port); - } + spin_unlock_irqrestore(&priv->lock, flags); return 0; } -- cgit v1.2.3-18-g5258 From 9080b72819650c3a757d173a19bc930d603b79d6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:58 +0000 Subject: sh-sci: remove early_sci_setup() Remove unused early_sci_setup() function from sh-sci. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index af5da110d52..5f37f7d3166 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1082,20 +1082,6 @@ static void __init sci_init_ports(void) } } -int __init early_sci_setup(struct uart_port *port) -{ - if (unlikely(port->line > SCI_NPORTS)) - return -ENODEV; - - sci_init_ports(); - - sci_ports[port->line].port.membase = port->membase; - sci_ports[port->line].port.mapbase = port->mapbase; - sci_ports[port->line].port.type = port->type; - - return 0; -} - #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE /* * Print a string to the serial port trying not to disturb -- cgit v1.2.3-18-g5258 From dc8e6f5bfcd6a307a8196d3e41fd9798be5a1c76 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:06 +0000 Subject: sh-sci: rework serial console support Rework sh-sci serial console code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 47 +++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5f37f7d3166..d2cd1a400c1 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -91,10 +91,6 @@ struct sh_sci_priv { #endif }; -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static struct sci_port *serial_console_port; -#endif - /* Function prototypes */ static void sci_stop_tx(struct uart_port *port); @@ -1083,6 +1079,18 @@ static void __init sci_init_ports(void) } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static struct tty_driver *serial_console_device(struct console *co, int *index) +{ + struct uart_driver *p = &sci_uart_driver; + *index = co->index; + return p->tty_driver; +} + +static void serial_console_putchar(struct uart_port *port, int ch) +{ + sci_poll_put_char(port, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1090,16 +1098,10 @@ static void __init sci_init_ports(void) static void serial_console_write(struct console *co, const char *s, unsigned count) { - struct uart_port *port = &serial_console_port->port; + struct uart_port *port = co->data; unsigned short bits; - int i; - for (i = 0; i < count; i++) { - if (*s == 10) - sci_poll_put_char(port, '\r'); - - sci_poll_put_char(port, *s++); - } + uart_console_write(co->data, s, count, serial_console_putchar); /* wait until fifo is empty and last bit has been transmitted */ bits = SCxSR_TDxE(port) | SCxSR_TEND(port); @@ -1109,6 +1111,7 @@ static void serial_console_write(struct console *co, const char *s, static int __init serial_console_setup(struct console *co, char *options) { + struct sci_port *sci_port; struct uart_port *port; int baud = 115200; int bits = 8; @@ -1124,8 +1127,9 @@ static int __init serial_console_setup(struct console *co, char *options) if (co->index >= SCI_NPORTS) co->index = 0; - serial_console_port = &sci_ports[co->index]; - port = &serial_console_port->port; + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; /* * Also need to check port->type, we don't actually have any @@ -1135,21 +1139,17 @@ static int __init serial_console_setup(struct console *co, char *options) */ if (!port->type) return -ENODEV; - if (!port->membase || !port->mapbase) - return -ENODEV; - - port->type = serial_console_port->type; #ifdef CONFIG_HAVE_CLK - if (!serial_console_port->clk) - serial_console_port->clk = clk_get(NULL, "module_clk"); + if (!sci_port->clk) + sci_port->clk = clk_get(NULL, "module_clk"); #endif if (port->flags & UPF_IOREMAP) sci_config_port(port, 0); - if (serial_console_port->enable) - serial_console_port->enable(port); + if (sci_port->enable) + sci_port->enable(port); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1165,12 +1165,11 @@ static int __init serial_console_setup(struct console *co, char *options) static struct console serial_console = { .name = "ttySC", - .device = uart_console_device, + .device = serial_console_device, .write = serial_console_write, .setup = serial_console_setup, .flags = CON_PRINTBUFFER, .index = -1, - .data = &sci_uart_driver, }; static int __init sci_console_init(void) -- cgit v1.2.3-18-g5258 From a5660adae85918f2ab6b10ab58e2f574c1bd5ce1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:38 +0000 Subject: sh-sci: use to_sci_port() if possible Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index d2cd1a400c1..17fa7f17bbe 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -618,7 +618,7 @@ static inline int sci_handle_breaks(struct uart_port *port) int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->info->port.tty; - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (uart_handle_break(port)) return 0; @@ -875,7 +875,7 @@ static void sci_break_ctl(struct uart_port *port, int break_state) static int sci_startup(struct uart_port *port) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (s->enable) s->enable(port); @@ -893,7 +893,7 @@ static int sci_startup(struct uart_port *port) static void sci_shutdown(struct uart_port *port) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); sci_stop_rx(port); sci_stop_tx(port); @@ -990,7 +990,7 @@ static int sci_request_port(struct uart_port *port) static void sci_config_port(struct uart_port *port, int flags) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); port->type = s->type; @@ -1002,7 +1002,7 @@ static void sci_config_port(struct uart_port *port, int flags) static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) { - struct sci_port *s = &sci_ports[port->line]; + struct sci_port *s = to_sci_port(port); if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) return -EINVAL; -- cgit v1.2.3-18-g5258 From 0ee70712922c15252183db8b50a7e369c96017c0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:13:50 +0000 Subject: sh-sci: allow single port platform devices Allow registration of single port sh-sci platform devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 125 ++++++++++++++++++++++++++++-------------------- 1 file changed, 72 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 17fa7f17bbe..e9b350c58ba 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1221,6 +1221,70 @@ static int __devexit sci_remove(struct platform_device *dev) return 0; } +static int __devinit sci_probe_single(struct platform_device *dev, + unsigned int index, + struct plat_sci_port *p, + struct sci_port *sciport) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + unsigned long flags; + int ret; + + /* Sanity check */ + if (unlikely(index >= SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port " + "%d when only %d are available.\n", + index+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping " + "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + return 0; + } + + sciport->port.mapbase = p->mapbase; + + if (p->mapbase && !p->membase) { + if (p->flags & UPF_IOREMAP) { + p->membase = ioremap_nocache(p->mapbase, 0x40); + if (IS_ERR(p->membase)) + return PTR_ERR(p->membase); + } else { + /* + * For the simple (and majority of) cases + * where we don't need to do any remapping, + * just cast the cookie directly. + */ + p->membase = (void __iomem *)p->mapbase; + } + } + + sciport->port.membase = p->membase; + + sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; + sciport->port.flags = p->flags; + sciport->port.dev = &dev->dev; + + sciport->type = sciport->port.type = p->type; + + memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); + + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + + if (ret) { + if (p->flags & UPF_IOREMAP) + iounmap(p->membase); + + return ret; + } + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + /* * Register a set of serial devices attached to a platform device. The * list is terminated with a zero flags entry, which means we expect @@ -1232,7 +1296,6 @@ static int __devinit sci_probe(struct platform_device *dev) struct plat_sci_port *p = dev->dev.platform_data; struct sh_sci_priv *priv; int i, ret = -EINVAL; - unsigned long flags; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) @@ -1247,60 +1310,16 @@ static int __devinit sci_probe(struct platform_device *dev) cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); #endif - for (i = 0; p && p->flags != 0; p++, i++) { - struct sci_port *sciport = &sci_ports[i]; - - /* Sanity check */ - if (unlikely(i == SCI_NPORTS)) { - dev_notice(&dev->dev, "Attempting to register port " - "%d when only %d are available.\n", - i+1, SCI_NPORTS); - dev_notice(&dev->dev, "Consider bumping " - "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - break; - } - - sciport->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) { - ret = PTR_ERR(p->membase); - goto err_unreg; - } - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - - sciport->port.membase = p->membase; - - sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; - sciport->port.flags = p->flags; - sciport->port.dev = &dev->dev; - - sciport->type = sciport->port.type = p->type; - - memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); - - ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - - if (ret && (p->flags & UPF_IOREMAP)) { - iounmap(p->membase); + if (dev->id != -1) { + ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); + if (ret) goto err_unreg; + } else { + for (i = 0; p && p->flags != 0; p++, i++) { + ret = sci_probe_single(dev, i, p, &sci_ports[i]); + if (ret) + goto err_unreg; } - - INIT_LIST_HEAD(&sciport->node); - - spin_lock_irqsave(&priv->lock, flags); - list_add(&sciport->node, &priv->ports); - spin_unlock_irqrestore(&priv->lock, flags); } #ifdef CONFIG_SH_STANDARD_BIOS -- cgit v1.2.3-18-g5258 From 7ed7e0711b3ff85b3e15591081b42f2af96d584b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:14 +0000 Subject: sh-sci: replace sci_init_ports() Replace sci_init_ports() with sci_init_single(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 107 ++++++++++++++++++++++-------------------------- 1 file changed, 50 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index e9b350c58ba..039c700ce1e 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1036,46 +1036,64 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __init sci_init_ports(void) +static int __devinit sci_init_single(struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { - static int first = 1; - int i; - - if (!first) - return; - - first = 0; - - for (i = 0; i < SCI_NPORTS; i++) { - sci_ports[i].port.ops = &sci_uart_ops; - sci_ports[i].port.iotype = UPIO_MEM; - sci_ports[i].port.line = i; - sci_ports[i].port.fifosize = 1; + sci_port->port.ops = &sci_uart_ops; + sci_port->port.iotype = UPIO_MEM; + sci_port->port.line = index; + sci_port->port.fifosize = 1; #if defined(__H8300H__) || defined(__H8300S__) #ifdef __H8300S__ - sci_ports[i].enable = h8300_sci_enable; - sci_ports[i].disable = h8300_sci_disable; + sci_port->enable = h8300_sci_enable; + sci_port->disable = h8300_sci_disable; #endif - sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK; + sci_port->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_HAVE_CLK) - /* - * XXX: We should use a proper SCI/SCIF clock - */ - { - struct clk *clk = clk_get(NULL, "module_clk"); - sci_ports[i].port.uartclk = clk_get_rate(clk); - clk_put(clk); - } + /* + * XXX: We should use a proper SCI/SCIF clock + */ + { + struct clk *clk = clk_get(NULL, "module_clk"); + sci_port->port.uartclk = clk_get_rate(clk); + clk_put(clk); + } #else #error "Need a valid uartclk" #endif - sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i]; - sci_ports[i].break_timer.function = sci_break_timer; + sci_port->break_timer.data = (unsigned long)sci_port; + sci_port->break_timer.function = sci_break_timer; + init_timer(&sci_port->break_timer); + + sci_port->port.mapbase = p->mapbase; - init_timer(&sci_ports[i].break_timer); + if (p->mapbase && !p->membase) { + if (p->flags & UPF_IOREMAP) { + p->membase = ioremap_nocache(p->mapbase, 0x40); + if (IS_ERR(p->membase)) + return PTR_ERR(p->membase); + } else { + /* + * For the simple (and majority of) cases + * where we don't need to do any remapping, + * just cast the cookie directly. + */ + p->membase = (void __iomem *)p->mapbase; + } } + + sci_port->port.membase = p->membase; + + sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; + sci_port->port.flags = p->flags; + sci_port->type = sci_port->port.type = p->type; + + memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + + return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1174,7 +1192,6 @@ static struct console serial_console = { static int __init sci_console_init(void) { - sci_init_ports(); register_console(&serial_console); return 0; } @@ -1240,32 +1257,10 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sciport->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) - return PTR_ERR(p->membase); - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - - sciport->port.membase = p->membase; - - sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; - sciport->port.flags = p->flags; - sciport->port.dev = &dev->dev; - - sciport->type = sciport->port.type = p->type; - - memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); + sciport->port.dev = &dev->dev; + ret = sci_init_single(sciport, index, p); + if (ret) + return ret; ret = uart_add_one_port(&sci_uart_driver, &sciport->port); @@ -1380,8 +1375,6 @@ static int __init sci_init(void) printk(banner); - sci_init_ports(); - ret = uart_register_driver(&sci_uart_driver); if (likely(ret == 0)) { ret = platform_driver_register(&sci_driver); -- cgit v1.2.3-18-g5258 From 08f8cb315fdf9195b472aeb440ae65b189b151da Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:22 +0000 Subject: sh-sci: ioremap() in a single place Handle ioremap() in sci_config_port only. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 54 ++++++++++++++++++------------------------------- 1 file changed, 20 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 039c700ce1e..408624ae7fe 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -994,9 +994,21 @@ static void sci_config_port(struct uart_port *port, int flags) port->type = s->type; - if (port->flags & UPF_IOREMAP && !port->membase) { + if (port->membase) + return; + + if (port->flags & UPF_IOREMAP) { port->membase = ioremap_nocache(port->mapbase, 0x40); - dev_err(port->dev, "can't remap port#%d\n", port->line); + + if (IS_ERR(port->membase)) + dev_err(port->dev, "can't remap port#%d\n", port->line); + } else { + /* + * For the simple (and majority of) cases where we don't + * need to do any remapping, just cast the cookie + * directly. + */ + port->membase = (void __iomem *)port->mapbase; } } @@ -1036,9 +1048,9 @@ static struct uart_ops sci_uart_ops = { #endif }; -static int __devinit sci_init_single(struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) +static void __devinit sci_init_single(struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; @@ -1069,22 +1081,6 @@ static int __devinit sci_init_single(struct sci_port *sci_port, init_timer(&sci_port->break_timer); sci_port->port.mapbase = p->mapbase; - - if (p->mapbase && !p->membase) { - if (p->flags & UPF_IOREMAP) { - p->membase = ioremap_nocache(p->mapbase, 0x40); - if (IS_ERR(p->membase)) - return PTR_ERR(p->membase); - } else { - /* - * For the simple (and majority of) cases - * where we don't need to do any remapping, - * just cast the cookie directly. - */ - p->membase = (void __iomem *)p->mapbase; - } - } - sci_port->port.membase = p->membase; sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; @@ -1092,8 +1088,6 @@ static int __devinit sci_init_single(struct sci_port *sci_port, sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); - - return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1163,8 +1157,7 @@ static int __init serial_console_setup(struct console *co, char *options) sci_port->clk = clk_get(NULL, "module_clk"); #endif - if (port->flags & UPF_IOREMAP) - sci_config_port(port, 0); + sci_config_port(port, 0); if (sci_port->enable) sci_port->enable(port); @@ -1258,18 +1251,11 @@ static int __devinit sci_probe_single(struct platform_device *dev, } sciport->port.dev = &dev->dev; - ret = sci_init_single(sciport, index, p); - if (ret) - return ret; + sci_init_single(sciport, index, p); ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - - if (ret) { - if (p->flags & UPF_IOREMAP) - iounmap(p->membase); - + if (ret) return ret; - } INIT_LIST_HEAD(&sciport->node); -- cgit v1.2.3-18-g5258 From 501b825d01efb93766c87d29f299851152cf4eb0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 21 Jan 2009 15:14:30 +0000 Subject: sh-sci: improve clock framework support Use enable/disable hooks for clock framework integration. Make sure we control the clock for the serial console as well. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 77 +++++++++++++++++++++++++++++-------------------- 1 file changed, 46 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 408624ae7fe..3daf76725ac 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -76,8 +76,10 @@ struct sci_port { int break_flag; #ifdef CONFIG_HAVE_CLK - /* Port clock */ - struct clk *clk; + /* Interface clock */ + struct clk *iclk; + /* Data clock */ + struct clk *dclk; #endif struct list_head node; }; @@ -166,12 +168,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl) *mstpcrl &= ~mask; } -static inline void h8300_sci_enable(struct uart_port *port) +static void h8300_sci_enable(struct uart_port *port) { h8300_sci_config(port, sci_enable); } -static inline void h8300_sci_disable(struct uart_port *port) +static void h8300_sci_disable(struct uart_port *port) { h8300_sci_config(port, sci_disable); } @@ -742,13 +744,34 @@ static int sci_notifier(struct notifier_block *self, (phase == CPUFREQ_RESUMECHANGE)) { spin_lock_irqsave(&priv->lock, flags); list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->clk); + sci_port->port.uartclk = clk_get_rate(sci_port->dclk); spin_unlock_irqrestore(&priv->lock, flags); } return NOTIFY_OK; } + +static void sci_clk_enable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_enable(sci_port->dclk); + sci_port->port.uartclk = clk_get_rate(sci_port->dclk); + + if (sci_port->iclk) + clk_enable(sci_port->iclk); +} + +static void sci_clk_disable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + if (sci_port->iclk) + clk_disable(sci_port->iclk); + + clk_disable(sci_port->dclk); +} #endif static int sci_request_irq(struct sci_port *port) @@ -880,10 +903,6 @@ static int sci_startup(struct uart_port *port) if (s->enable) s->enable(port); -#ifdef CONFIG_HAVE_CLK - s->clk = clk_get(NULL, "module_clk"); -#endif - sci_request_irq(s); sci_start_tx(port); sci_start_rx(port, 1); @@ -901,11 +920,6 @@ static void sci_shutdown(struct uart_port *port) if (s->disable) s->disable(port); - -#ifdef CONFIG_HAVE_CLK - clk_put(s->clk); - s->clk = NULL; -#endif } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, @@ -1048,7 +1062,8 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __devinit sci_init_single(struct sci_port *sci_port, +static void __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, unsigned int index, struct plat_sci_port *p) { @@ -1064,14 +1079,10 @@ static void __devinit sci_init_single(struct sci_port *sci_port, #endif sci_port->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_HAVE_CLK) - /* - * XXX: We should use a proper SCI/SCIF clock - */ - { - struct clk *clk = clk_get(NULL, "module_clk"); - sci_port->port.uartclk = clk_get_rate(clk); - clk_put(clk); - } + sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; + sci_port->dclk = clk_get(&dev->dev, "module_clk"); + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; #else #error "Need a valid uartclk" #endif @@ -1085,9 +1096,11 @@ static void __devinit sci_init_single(struct sci_port *sci_port, sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; sci_port->port.flags = p->flags; + sci_port->port.dev = &dev->dev; sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1111,14 +1124,21 @@ static void serial_console_write(struct console *co, const char *s, unsigned count) { struct uart_port *port = co->data; + struct sci_port *sci_port = to_sci_port(port); unsigned short bits; - uart_console_write(co->data, s, count, serial_console_putchar); + if (sci_port->enable) + sci_port->enable(port); + + uart_console_write(port, s, count, serial_console_putchar); /* wait until fifo is empty and last bit has been transmitted */ bits = SCxSR_TDxE(port) | SCxSR_TEND(port); while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); + + if (sci_port->disable); + sci_port->disable(port); } static int __init serial_console_setup(struct console *co, char *options) @@ -1152,11 +1172,6 @@ static int __init serial_console_setup(struct console *co, char *options) if (!port->type) return -ENODEV; -#ifdef CONFIG_HAVE_CLK - if (!sci_port->clk) - sci_port->clk = clk_get(NULL, "module_clk"); -#endif - sci_config_port(port, 0); if (sci_port->enable) @@ -1171,6 +1186,7 @@ static int __init serial_console_setup(struct console *co, char *options) if (ret == 0) sci_stop_rx(port); #endif + /* TODO: disable clock */ return ret; } @@ -1250,8 +1266,7 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sciport->port.dev = &dev->dev; - sci_init_single(sciport, index, p); + sci_init_single(dev, sciport, index, p); ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) -- cgit v1.2.3-18-g5258 From 54507f6ee99778a727ff1b38a1f4050fe6479835 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 8 May 2009 23:48:33 +0900 Subject: serial: sh-sci: Fix up section mismatch in error path. The sci_probe_single() path attempts to use sci_remove() for the error path, while sci_remove() is still flagged as __devexit. So, we simply discard the section annotation. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 3daf76725ac..686e4a456e3 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1227,7 +1227,7 @@ static struct uart_driver sci_uart_driver = { }; -static int __devexit sci_remove(struct platform_device *dev) +static int sci_remove(struct platform_device *dev) { struct sh_sci_priv *priv = platform_get_drvdata(dev); struct sci_port *p; -- cgit v1.2.3-18-g5258 From 168f36237b16e2b3159e24c7d3b658e3c912d149 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 28 Apr 2009 04:40:15 +0000 Subject: serial: sh-sci: Fix up h8300 support. - Dummy SCIF functions define. - h8300 specific header include. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 4 ++++ drivers/serial/sh-sci.h | 17 +++++++++++++++-- 2 files changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 686e4a456e3..4e3248d5860 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -54,6 +54,10 @@ #include #endif +#ifdef CONFIG_H8300 +#include +#endif + #include "sh-sci.h" struct sci_port { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 84cc6512f08..e3eae4eaadd 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -317,7 +317,18 @@ } \ } -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ +#ifdef CONFIG_H8300 +/* h8300 don't have SCIF */ +#define CPU_SCIF_FNS(name) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + return 0; \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + } +#else +#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ SCI_IN(scif_size, scif_offset); \ @@ -326,6 +337,7 @@ { \ SCI_OUT(scif_size, scif_offset, value); \ } +#endif #define CPU_SCI_FNS(name, sci_offset, sci_size) \ static inline unsigned int sci_##name##_in(struct uart_port* port) \ @@ -363,7 +375,8 @@ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ h8_sci_offset, h8_sci_size) \ CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name) #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ defined(CONFIG_CPU_SUBTYPE_SH7724) #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ -- cgit v1.2.3-18-g5258 From e9e8b1fb995543c4cc3930f465923a552b2e48b7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 9 May 2009 14:31:37 +0900 Subject: sh: Fix up the sh64 earlyprintk build. sci_rxd_in() on SH-5 wants to be using SCSPTR, not SCSPTR2. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index e3eae4eaadd..38072c15b84 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -636,7 +636,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) -- cgit v1.2.3-18-g5258 From 53d6979ab6747e758207e8ac861b96d0da0d3332 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:35 +0900 Subject: nbd: don't clear rq->sector and nr_sectors unnecessarily There's no reason to clear rq->sector and nr_sectors after calling blk_rq_init(). They're guaranteed to be clear. Drop unnecessary clearing. [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Paul Clements Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 4d6de4f15cc..a9ab8be9d92 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -580,13 +580,6 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo, blk_rq_init(NULL, &sreq); sreq.cmd_type = REQ_TYPE_SPECIAL; nbd_cmd(&sreq) = NBD_CMD_DISC; - /* - * Set these to sane values in case server implementation - * fails to check the request type first and also to keep - * debugging output cleaner. - */ - sreq.sector = 0; - sreq.nr_sectors = 0; if (!lo->sock) return -EINVAL; nbd_send_req(lo, &sreq); -- cgit v1.2.3-18-g5258 From 9720aef2539c10e3a872e9a92beec225030d99db Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:36 +0900 Subject: ide-tape: don't initialize rq->sector for rw requests rq->sector is set to the tape->first_frame but it's never actually used and not even in the correct unit (512 byte sectors). Don't set it. [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jens Axboe --- drivers/ide/ide-tape.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8dfc68892d6..7149224d1fe 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -892,7 +892,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd[13] = cmd; rq->rq_disk = tape->disk; - rq->sector = tape->first_frame; if (size) { ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size, -- cgit v1.2.3-18-g5258 From c3a4d78c580de4edc9ef0f7c59812fb02ceb037f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:37 +0900 Subject: block: add rq->resid_len rq->data_len served two purposes - the length of data buffer on issue and the residual count on completion. This duality creates some headaches. First of all, block layer and low level drivers can't really determine what rq->data_len contains while a request is executing. It could be the total request length or it coulde be anything else one of the lower layers is using to keep track of residual count. This complicates things because blk_rq_bytes() and thus [__]blk_end_request_all() relies on rq->data_len for PC commands. Drivers which want to report residual count should first cache the total request length, update rq->data_len and then complete the request with the cached data length. Secondly, it makes requests default to reporting full residual count, ie. reporting that no data transfer occurred. The residual count is an exception not the norm; however, the driver should clear rq->data_len to zero to signify the normal cases while leaving it alone means no data transfer occurred at all. This reverse default behavior complicates code unnecessarily and renders block PC on some drivers (ide-tape/floppy) unuseable. This patch adds rq->resid_len which is used only for residual count. While at it, remove now unnecessasry blk_rq_bytes() caching in ide_pc_intr() as rq->data_len is not changed anymore. Boaz : spotted missing conversion in osd Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape [ Impact: cleanup residual count handling, report 0 resid by default ] Signed-off-by: Tejun Heo Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Mike Miller Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Doug Gilbert Cc: Mike Miller Cc: Eric Moore Cc: Darrick J. Wong Cc: Pete Zaitcev Cc: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 13 ++++------- drivers/block/ub.c | 6 ++--- drivers/ide/ide-atapi.c | 9 +------- drivers/ide/ide-cd.c | 13 +++++------ drivers/ide/ide-tape.c | 4 ++-- drivers/message/fusion/mptsas.c | 3 +-- drivers/scsi/libsas/sas_expander.c | 6 +---- drivers/scsi/libsas/sas_host_smp.c | 38 +++++++++++++++++--------------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 +--- drivers/scsi/scsi_lib.c | 24 ++++++++++---------- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 2 +- 12 files changed, 51 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 4d4d5e0d3fa..f22d4932433 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1299,7 +1299,6 @@ static void cciss_softirq_done(struct request *rq) { CommandList_struct *cmd = rq->completion_data; ctlr_info_t *h = hba[cmd->ctlr]; - unsigned int nr_bytes; unsigned long flags; u64bit temp64; int i, ddir; @@ -1321,15 +1320,11 @@ static void cciss_softirq_done(struct request *rq) printk("Done with %p\n", rq); #endif /* CCISS_DEBUG */ - /* - * Store the full size and set the residual count for pc requests - */ - nr_bytes = blk_rq_bytes(rq); + /* set the residual count for pc requests */ if (blk_pc_request(rq)) - rq->data_len = cmd->err_info->ResidualCnt; + rq->resid_len = cmd->err_info->ResidualCnt; - if (blk_end_request(rq, (rq->errors == 0) ? 0 : -EIO, nr_bytes)) - BUG(); + blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO); spin_lock_irqsave(&h->lock, flags); cmd_free(h, cmd, 1); @@ -2691,7 +2686,7 @@ static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd, printk(KERN_WARNING "cciss: cmd %p has" " completed with data underrun " "reported\n", cmd); - cmd->rq->data_len = cmd->err_info->ResidualCnt; + cmd->rq->resid_len = cmd->err_info->ResidualCnt; } break; case CMD_DATA_OVERRUN: diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 689cd27ac89..8c2cc71327e 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -783,10 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (cmd->error == 0) { if (blk_pc_request(rq)) { - if (cmd->act_len >= rq->data_len) - rq->data_len = 0; - else - rq->data_len -= cmd->act_len; + if (cmd->act_len < rq->data_len) + rq->resid_len = rq->data_len - cmd->act_len; scsi_status = 0; } else { if (cmd->act_len != cmd->len) { diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index afe5a432387..e4a02a05fc8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -367,7 +367,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) /* No more interrupts */ if ((stat & ATA_DRQ) == 0) { int uptodate, error; - unsigned int done; debug_log("Packet command completed, %d bytes transferred\n", pc->xferred); @@ -406,12 +405,6 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; - /* - * ->pc_callback() might change rq->data_len for - * residual count, cache total length. - */ - done = blk_rq_bytes(rq); - /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); @@ -431,7 +424,7 @@ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) error = uptodate ? 0 : -EIO; } - ide_complete_rq(drive, error, done); + ide_complete_rq(drive, error, blk_rq_bytes(rq)); return ide_stopped; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 673628790f1..8bbe222c5e4 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -519,7 +519,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, error = blk_execute_rq(drive->queue, info->disk, rq, 0); if (buffer) - *bufflen = rq->data_len; + *bufflen = rq->resid_len; flags = rq->cmd_flags; blk_put_request(rq); @@ -707,11 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { - unsigned int dlen = rq->data_len; - - rq->data_len = 0; - - if (blk_end_request(rq, 0, dlen)) + if (blk_end_request(rq, 0, rq->data_len)) BUG(); hwif->rq = NULL; @@ -740,9 +736,10 @@ out_end: nsectors = 1; if (blk_fs_request(rq) == 0) { - rq->data_len -= (cmd->nbytes - cmd->nleft); + rq->resid_len = rq->data_len - + (cmd->nbytes - cmd->nleft); if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) - rq->data_len += cmd->last_xfer_len; + rq->resid_len += cmd->last_xfer_len; } ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7149224d1fe..65c5b705883 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->data_len -= blocks * tape->blk_size; + rq->resid_len = rq->data_len - blocks * tape->blk_size; if (pc->error) { uptodate = 0; @@ -903,7 +903,7 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) blk_execute_rq(drive->queue, tape->disk, rq, 0); /* calculate the number of transferred bytes and update buffer state */ - size -= rq->data_len; + size -= rq->resid_len; tape->cur = tape->buf; if (cmd == REQ_IDETAPE_READ) tape->valid = size; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index a9019f081b9..5d5f34715de 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1357,8 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; memcpy(req->sense, smprep, sizeof(*smprep)); req->sense_len = sizeof(*smprep); - req->data_len = 0; - rsp->data_len -= smprep->ResponseDataLength; + rsp->resid_len = rsp->data_len - smprep->ResponseDataLength; } else { printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n", ioc->name, __func__); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 3da02e43678..6605ec905cc 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1936,12 +1936,8 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, bio_data(rsp->bio), rsp->data_len); if (ret > 0) { /* positive number is the untransferred residual */ - rsp->data_len = ret; - req->data_len = 0; + rsp->resid_len = ret; ret = 0; - } else if (ret == 0) { - rsp->data_len = 0; - req->data_len = 0; } return ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index d110a366c48..89952edd0be 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -134,7 +134,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, { u8 *req_data = NULL, *resp_data = NULL, *buf; struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); - int error = -EINVAL, resp_data_len = rsp->data_len; + int error = -EINVAL; /* eight is the minimum size for request and response frames */ if (req->data_len < 8 || rsp->data_len < 8) @@ -176,17 +176,20 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; + req->resid_len = req->data_len; + rsp->resid_len = rsp->data_len; + switch (req_data[1]) { case SMP_REPORT_GENERAL: - req->data_len -= 8; - resp_data_len -= 32; + req->resid_len -= 8; + rsp->resid_len -= 32; resp_data[2] = SMP_RESP_FUNC_ACC; resp_data[9] = sas_ha->num_phys; break; case SMP_REPORT_MANUF_INFO: - req->data_len -= 8; - resp_data_len -= 64; + req->resid_len -= 8; + rsp->resid_len -= 64; resp_data[2] = SMP_RESP_FUNC_ACC; memcpy(resp_data + 12, shost->hostt->name, SAS_EXPANDER_VENDOR_ID_LEN); @@ -199,13 +202,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_DISCOVER: - req->data_len -= 16; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 16; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 56; + rsp->resid_len -= 56; sas_host_smp_discover(sas_ha, resp_data, req_data[9]); break; @@ -215,13 +218,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_REPORT_PHY_SATA: - req->data_len -= 16; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 16; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 60; + rsp->resid_len -= 60; sas_report_phy_sata(sas_ha, resp_data, req_data[9]); break; @@ -238,13 +241,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_PHY_CONTROL: - req->data_len -= 44; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 44; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 8; + rsp->resid_len -= 8; sas_phy_control(sas_ha, req_data[9], req_data[10], req_data[32] >> 4, req_data[33] >> 4, resp_data); @@ -265,7 +268,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, flush_kernel_dcache_page(bio_page(rsp->bio)); kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); local_irq_enable(); - rsp->data_len = resp_data_len; out: kfree(req_data); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index e03dc0b1e1a..53759c566bf 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1170,9 +1170,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - req->data_len = 0; - rsp->data_len -= mpi_reply->ResponseDataLength; - + rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index aa9fc572e45..7d49ef589f3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -240,11 +240,11 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, * is invalid. Prevent the garbage from being misinterpreted * and prevent security leaks by zeroing out the excess data. */ - if (unlikely(req->data_len > 0 && req->data_len <= bufflen)) - memset(buffer + (bufflen - req->data_len), 0, req->data_len); + if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen)) + memset(buffer + (bufflen - req->resid_len), 0, req->resid_len); if (resid) - *resid = req->data_len; + *resid = req->resid_len; ret = req->errors; out: blk_put_request(req); @@ -549,7 +549,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, int leftover = (req->hard_nr_sectors << 9); if (blk_pc_request(req)) - leftover = req->data_len; + leftover = req->resid_len; /* kill remainder if no retrys */ if (error && scsi_noretry_cmd(cmd)) @@ -673,11 +673,11 @@ void scsi_release_buffers(struct scsi_cmnd *cmd) EXPORT_SYMBOL(scsi_release_buffers); /* - * Bidi commands Must be complete as a whole, both sides at once. - * If part of the bytes were written and lld returned - * scsi_in()->resid and/or scsi_out()->resid this information will be left - * in req->data_len and req->next_rq->data_len. The upper-layer driver can - * decide what to do with this information. + * Bidi commands Must be complete as a whole, both sides at once. If + * part of the bytes were written and lld returned scsi_in()->resid + * and/or scsi_out()->resid this information will be left in + * req->resid_len and req->next_rq->resid_len. The upper-layer driver + * can decide what to do with this information. */ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) { @@ -685,8 +685,8 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) unsigned int dlen = req->data_len; unsigned int next_dlen = req->next_rq->data_len; - req->data_len = scsi_out(cmd)->resid; - req->next_rq->data_len = scsi_in(cmd)->resid; + req->resid_len = scsi_out(cmd)->resid; + req->next_rq->resid_len = scsi_in(cmd)->resid; /* The req and req->next_rq have not been completed */ BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen)); @@ -778,7 +778,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) scsi_end_bidi_request(cmd); return; } - req->data_len = scsi_get_resid(cmd); + req->resid_len = scsi_get_resid(cmd); } BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */ diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df9b0b..dec4c70677d 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1260,7 +1260,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate) sense = rq->sense; result = rq->errors; - resid = rq->data_len; + resid = rq->resid_len; SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n", sdp->disk->disk_name, srp->header.pack_id, result)); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index eb24efea8f1..8681b708344 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -463,7 +463,7 @@ static void st_scsi_execute_end(struct request *req, int uptodate) struct scsi_tape *STp = SRpnt->stp; STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; - STp->buffer->cmdstat.residual = req->data_len; + STp->buffer->cmdstat.residual = req->resid_len; if (SRpnt->waiting) complete(SRpnt->waiting); -- cgit v1.2.3-18-g5258 From 5b93629b4509c03ffa87a9316412fedf6f58cb37 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:38 +0900 Subject: block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones Implement accessors - blk_rq_pos(), blk_rq_sectors() and blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors and rq->hard_cur_sectors respectively and convert direct references of the said fields to the accessors. This is in preparation of request data length handling cleanup. Geert : suggested adding const to struct request * parameter to accessors Sergei : spotted error in patch description [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Acked-by: Stephen Rothwell Tested-by: Grant Likely Acked-by: Grant Likely Ackec-by: Sergei Shtylyov Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: James Bottomley Signed-off-by: Jens Axboe --- drivers/block/ps3disk.c | 2 +- drivers/block/viodasd.c | 6 +++--- drivers/block/xsysace.c | 10 +++++----- drivers/ide/ide-cd.c | 8 ++++---- drivers/ide/ide-io.c | 4 ++-- drivers/message/i2o/i2o_block.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- 7 files changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index f6586e4d351..c2388673684 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -136,7 +136,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev, dev_dbg(&dev->sbd.core, "%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n", __func__, __LINE__, op, n, req->nr_sectors, - req->hard_nr_sectors); + blk_rq_sectors(req)); #endif start_sector = req->sector * priv->blocking_factor; diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index ecccf65dce2..e821eed7132 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -368,12 +368,12 @@ static void do_viodasd_request(struct request_queue *q) blkdev_dequeue_request(req); /* check that request contains a valid command */ if (!blk_fs_request(req)) { - viodasd_end_request(req, -EIO, req->hard_nr_sectors); + viodasd_end_request(req, -EIO, blk_rq_sectors(req)); continue; } /* Try sending the request */ if (send_request(req) != 0) - viodasd_end_request(req, -EIO, req->hard_nr_sectors); + viodasd_end_request(req, -EIO, blk_rq_sectors(req)); } } @@ -590,7 +590,7 @@ static int viodasd_handle_read_write(struct vioblocklpevent *bevent) err = vio_lookup_rc(viodasd_err_table, bevent->sub_result); printk(VIOD_KERN_WARNING "read/write error %d:0x%04x (%s)\n", event->xRc, bevent->sub_result, err->msg); - num_sect = req->hard_nr_sectors; + num_sect = blk_rq_sectors(req); } qlock = req->q->queue_lock; spin_lock_irqsave(qlock, irq_flags); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index b1e1d7e5ab1..5722931d14c 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -645,8 +645,8 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, - "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n", - (unsigned long long) req->sector, req->hard_nr_sectors, + "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n", + (unsigned long long) req->sector, blk_rq_sectors(req), req->current_nr_sectors, rq_data_dir(req)); ace->req = req; @@ -654,7 +654,7 @@ static void ace_fsm_dostate(struct ace_device *ace) ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR; ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF); - count = req->hard_nr_sectors; + count = blk_rq_sectors(req); if (rq_data_dir(req)) { /* Kick off write request */ dev_dbg(ace->dev, "write data\n"); @@ -719,8 +719,8 @@ static void ace_fsm_dostate(struct ace_device *ace) /* bio finished; is there another one? */ if (__blk_end_request(ace->req, 0, blk_rq_cur_bytes(ace->req))) { - /* dev_dbg(ace->dev, "next block; h=%li c=%i\n", - * ace->req->hard_nr_sectors, + /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", + * blk_rq_sectors(ace->req), * ace->req->current_nr_sectors); */ ace->data_ptr = ace->req->buffer; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 8bbe222c5e4..182320dd6ea 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -730,7 +730,7 @@ out_end: if (blk_pc_request(rq)) nsectors = (rq->data_len + 511) >> 9; else - nsectors = rq->hard_nr_sectors; + nsectors = blk_rq_sectors(rq); if (nsectors == 0) nsectors = 1; @@ -875,7 +875,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, return ide_issue_pc(drive, &cmd); out_end: - nsectors = rq->hard_nr_sectors; + nsectors = blk_rq_sectors(rq); if (nsectors == 0) nsectors = 1; @@ -1359,8 +1359,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { int hard_sect = queue_hardsect_size(q); - long block = (long)rq->hard_sector / (hard_sect >> 9); - unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9); + long block = (long)blk_rq_pos(rq) / (hard_sect >> 9); + unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9); memset(rq->cmd, 0, BLK_MAX_CDB); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index a0309ea661a..df23bcbd94b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -118,7 +118,7 @@ unsigned int ide_rq_bytes(struct request *rq) if (blk_pc_request(rq)) return rq->data_len; else - return rq->hard_cur_sectors << 9; + return blk_rq_cur_sectors(rq) << 9; } EXPORT_SYMBOL_GPL(ide_rq_bytes); @@ -133,7 +133,7 @@ int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes) * and complete the whole request right now */ if (blk_noretry_request(rq) && error <= 0) - nr_bytes = rq->hard_nr_sectors << 9; + nr_bytes = blk_rq_sectors(rq) << 9; rc = ide_end_rq(drive, rq, error, nr_bytes); if (rc == 0) diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 221317e6a00..56e60f0d531 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -427,7 +427,7 @@ static void i2o_block_end_request(struct request *req, int error, unsigned long flags; if (blk_end_request(req, error, nr_bytes)) { - int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT); + int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); if (blk_pc_request(req)) leftover = req->data_len; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7d49ef589f3..9ff0ca9988a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = (req->hard_nr_sectors << 9); + int leftover = blk_rq_sectors(req) << 9; if (blk_pc_request(req)) leftover = req->resid_len; -- cgit v1.2.3-18-g5258 From 83096ebf1263b2c1ee5e653ba37d993d02e3eb7b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:39 +0900 Subject: block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Tested-by: Grant Likely Acked-by: Grant Likely Tested-by: Adrian McMenamin Acked-by: Adrian McMenamin Acked-by: Mike Miller Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Pete Zaitcev Cc: Stephen Rothwell Cc: Paul Clements Cc: Tim Waugh Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: David Woodhouse Cc: Martin Schwidefsky Cc: Dario Ballabio Cc: David S. Miller Cc: Rusty Russell Cc: unsik Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/DAC960.c | 6 ++--- drivers/block/amiflop.c | 6 ++--- drivers/block/ataflop.c | 10 +++---- drivers/block/cciss.c | 22 +++++++-------- drivers/block/cpqarray.c | 9 ++++--- drivers/block/floppy.c | 53 +++++++++++++++++++------------------ drivers/block/hd.c | 14 +++++----- drivers/block/mg_disk.c | 25 ++++++++--------- drivers/block/nbd.c | 12 ++++----- drivers/block/paride/pcd.c | 4 +-- drivers/block/paride/pd.c | 8 +++--- drivers/block/paride/pf.c | 8 +++--- drivers/block/ps3disk.c | 9 +++---- drivers/block/sunvdc.c | 2 +- drivers/block/swim.c | 6 ++--- drivers/block/swim3.c | 34 +++++++++++++----------- drivers/block/sx8.c | 6 ++--- drivers/block/ub.c | 6 ++--- drivers/block/viodasd.c | 2 +- drivers/block/virtio_blk.c | 2 +- drivers/block/xd.c | 4 +-- drivers/block/xen-blkfront.c | 11 ++++---- drivers/block/xsysace.c | 17 ++++++------ drivers/block/z2ram.c | 6 ++--- drivers/cdrom/gdrom.c | 6 ++--- drivers/cdrom/viocd.c | 2 +- drivers/memstick/core/mspro_block.c | 6 ++--- drivers/message/i2o/i2o_block.c | 20 +++++++------- drivers/mmc/card/block.c | 10 +++---- drivers/mtd/mtd_blkdevs.c | 7 ++--- drivers/s390/block/dasd.c | 2 +- drivers/s390/block/dasd_diag.c | 5 ++-- drivers/s390/block/dasd_eckd.c | 6 ++--- drivers/s390/block/dasd_fba.c | 7 ++--- drivers/s390/char/tape_34xx.c | 2 +- drivers/s390/char/tape_3590.c | 2 +- drivers/s390/char/tape_block.c | 2 +- drivers/sbus/char/jsflash.c | 4 +-- drivers/scsi/eata.c | 24 ++++++++--------- drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++-------- drivers/scsi/scsi_lib.c | 6 ++--- drivers/scsi/sd.c | 24 ++++++++--------- drivers/scsi/sd_dif.c | 2 +- drivers/scsi/sr.c | 15 ++++++----- drivers/scsi/u14-34f.c | 22 ++++++++------- 45 files changed, 245 insertions(+), 233 deletions(-) (limited to 'drivers') diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index f22ed6cc69f..774ab05973a 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -3338,8 +3338,8 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_ } Command->Completion = Request->end_io_data; Command->LogicalDriveNumber = (long)Request->rq_disk->private_data; - Command->BlockNumber = Request->sector; - Command->BlockCount = Request->nr_sectors; + Command->BlockNumber = blk_rq_pos(Request); + Command->BlockCount = blk_rq_sectors(Request); Command->Request = Request; blkdev_dequeue_request(Request); Command->SegmentCount = blk_rq_map_sg(req_q, @@ -3431,7 +3431,7 @@ static void DAC960_queue_partial_rw(DAC960_Command_T *Command) * successfully as possible. */ Command->SegmentCount = 1; - Command->BlockNumber = Request->sector; + Command->BlockNumber = blk_rq_pos(Request); Command->BlockCount = 1; DAC960_QueueReadWriteCommand(Command); return; diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 8ff95f2c0ed..e4a14b94828 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1351,13 +1351,13 @@ static void redo_fd_request(void) drive = floppy - unit; /* Here someone could investigate to be more efficient */ - for (cnt = 0; cnt < CURRENT->current_nr_sectors; cnt++) { + for (cnt = 0; cnt < blk_rq_cur_sectors(CURRENT); cnt++) { #ifdef DEBUG printk("fd: sector %ld + %d requested for %s\n", - CURRENT->sector,cnt, + blk_rq_pos(CURRENT), cnt, (rq_data_dir(CURRENT) == READ) ? "read" : "write"); #endif - block = CURRENT->sector + cnt; + block = blk_rq_pos(CURRENT) + cnt; if ((int)block > floppy->blocks) { __blk_end_request_cur(CURRENT, -EIO); goto repeat; diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 25067287211..234024cda5e 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -725,7 +725,7 @@ static void do_fd_action( int drive ) if (IS_BUFFERED( drive, ReqSide, ReqTrack )) { if (ReqCmd == READ) { copy_buffer( SECTOR_BUFFER(ReqSector), ReqData ); - if (++ReqCnt < CURRENT->current_nr_sectors) { + if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) { /* read next sector */ setup_req_params( drive ); goto repeat; @@ -1130,7 +1130,7 @@ static void fd_rwsec_done1(int status) } } - if (++ReqCnt < CURRENT->current_nr_sectors) { + if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) { /* read next sector */ setup_req_params( SelectedDrive ); do_fd_action( SelectedDrive ); @@ -1394,7 +1394,7 @@ static void redo_fd_request(void) DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n", CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "", - CURRENT ? CURRENT->sector : 0 )); + CURRENT ? blk_rq_pos(CURRENT) : 0 )); IsFormatting = 0; @@ -1440,7 +1440,7 @@ repeat: UD.autoprobe = 0; } - if (CURRENT->sector + 1 > UDT->blocks) { + if (blk_rq_pos(CURRENT) + 1 > UDT->blocks) { __blk_end_request_cur(CURRENT, -EIO); goto repeat; } @@ -1450,7 +1450,7 @@ repeat: ReqCnt = 0; ReqCmd = rq_data_dir(CURRENT); - ReqBlock = CURRENT->sector; + ReqBlock = blk_rq_pos(CURRENT); ReqBuffer = CURRENT->buffer; setup_req_params( drive ); do_fd_action( drive ); diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f22d4932433..ab7b04c0db7 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2835,10 +2835,10 @@ static void do_cciss_request(struct request_queue *q) c->Request.Timeout = 0; // Don't time out c->Request.CDB[0] = (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write; - start_blk = creq->sector; + start_blk = blk_rq_pos(creq); #ifdef CCISS_DEBUG - printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector, - (int)creq->nr_sectors); + printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", + (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq)); #endif /* CCISS_DEBUG */ sg_init_table(tmp_sg, MAXSGENTRIES); @@ -2864,8 +2864,8 @@ static void do_cciss_request(struct request_queue *q) h->maxSG = seg; #ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n", - creq->nr_sectors, seg); + printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n", + blk_rq_sectors(creq), seg); #endif /* CCISS_DEBUG */ c->Header.SGList = c->Header.SGTotal = seg; @@ -2877,8 +2877,8 @@ static void do_cciss_request(struct request_queue *q) c->Request.CDB[4] = (start_blk >> 8) & 0xff; c->Request.CDB[5] = start_blk & 0xff; c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB - c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff; - c->Request.CDB[8] = creq->nr_sectors & 0xff; + c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff; + c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff; c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; } else { u32 upper32 = upper_32_bits(start_blk); @@ -2893,10 +2893,10 @@ static void do_cciss_request(struct request_queue *q) c->Request.CDB[7]= (start_blk >> 16) & 0xff; c->Request.CDB[8]= (start_blk >> 8) & 0xff; c->Request.CDB[9]= start_blk & 0xff; - c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff; - c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff; - c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff; - c->Request.CDB[13]= creq->nr_sectors & 0xff; + c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff; + c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff; + c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff; + c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff; c->Request.CDB[14] = c->Request.CDB[15] = 0; } } else if (blk_pc_request(creq)) { diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 488a8f4a60a..a5caeff4718 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -919,10 +919,11 @@ queue_next: c->hdr.size = sizeof(rblk_t) >> 2; c->size += sizeof(rblk_t); - c->req.hdr.blk = creq->sector; + c->req.hdr.blk = blk_rq_pos(creq); c->rq = creq; DBGPX( - printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors); + printk("sector=%d, nr_sectors=%u\n", + blk_rq_pos(creq), blk_rq_sectors(creq)); ); sg_init_table(tmp_sg, SG_MAX); seg = blk_rq_map_sg(q, creq, tmp_sg); @@ -940,9 +941,9 @@ DBGPX( tmp_sg[i].offset, tmp_sg[i].length, dir); } -DBGPX( printk("Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); ); +DBGPX( printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); ); c->req.hdr.sg_cnt = seg; - c->req.hdr.blk_cnt = creq->nr_sectors; + c->req.hdr.blk_cnt = blk_rq_sectors(creq); c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE; c->type = CMD_RWREQ; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 1300df6f164..45248628338 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -2303,7 +2303,7 @@ static void floppy_end_request(struct request *req, int error) /* current_count_sectors can be zero if transfer failed */ if (error) - nr_sectors = req->current_nr_sectors; + nr_sectors = blk_rq_cur_sectors(req); if (__blk_end_request(req, error, nr_sectors << 9)) return; @@ -2332,7 +2332,7 @@ static void request_done(int uptodate) if (uptodate) { /* maintain values for invalidation on geometry * change */ - block = current_count_sectors + req->sector; + block = current_count_sectors + blk_rq_pos(req); INFBOUND(DRS->maxblock, block); if (block > _floppy->sect) DRS->maxtrack = 1; @@ -2346,10 +2346,10 @@ static void request_done(int uptodate) /* record write error information */ DRWE->write_errors++; if (DRWE->write_errors == 1) { - DRWE->first_error_sector = req->sector; + DRWE->first_error_sector = blk_rq_pos(req); DRWE->first_error_generation = DRS->generation; } - DRWE->last_error_sector = req->sector; + DRWE->last_error_sector = blk_rq_pos(req); DRWE->last_error_generation = DRS->generation; } spin_lock_irqsave(q->queue_lock, flags); @@ -2503,24 +2503,24 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) max_sector = transfer_size(ssize, min(max_sector, max_sector_2), - current_req->nr_sectors); + blk_rq_sectors(current_req)); if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE && - buffer_max > fsector_t + current_req->nr_sectors) + buffer_max > fsector_t + blk_rq_sectors(current_req)) current_count_sectors = min_t(int, buffer_max - fsector_t, - current_req->nr_sectors); + blk_rq_sectors(current_req)); remaining = current_count_sectors << 9; #ifdef FLOPPY_SANITY_CHECK - if ((remaining >> 9) > current_req->nr_sectors && + if ((remaining >> 9) > blk_rq_sectors(current_req) && CT(COMMAND) == FD_WRITE) { DPRINT("in copy buffer\n"); printk("current_count_sectors=%ld\n", current_count_sectors); printk("remaining=%d\n", remaining >> 9); - printk("current_req->nr_sectors=%ld\n", - current_req->nr_sectors); + printk("current_req->nr_sectors=%u\n", + blk_rq_sectors(current_req)); printk("current_req->current_nr_sectors=%u\n", - current_req->current_nr_sectors); + blk_rq_cur_sectors(current_req)); printk("max_sector=%d\n", max_sector); printk("ssize=%d\n", ssize); } @@ -2530,7 +2530,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9); - size = current_req->current_nr_sectors << 9; + size = blk_rq_cur_sectors(current_req) << 9; rq_for_each_segment(bv, current_req, iter) { if (!remaining) @@ -2648,10 +2648,10 @@ static int make_raw_rw_request(void) max_sector = _floppy->sect * _floppy->head; - TRACK = (int)current_req->sector / max_sector; - fsector_t = (int)current_req->sector % max_sector; + TRACK = (int)blk_rq_pos(current_req) / max_sector; + fsector_t = (int)blk_rq_pos(current_req) % max_sector; if (_floppy->track && TRACK >= _floppy->track) { - if (current_req->current_nr_sectors & 1) { + if (blk_rq_cur_sectors(current_req) & 1) { current_count_sectors = 1; return 1; } else @@ -2669,7 +2669,7 @@ static int make_raw_rw_request(void) if (fsector_t >= max_sector) { current_count_sectors = min_t(int, _floppy->sect - fsector_t, - current_req->nr_sectors); + blk_rq_sectors(current_req)); return 1; } SIZECODE = 2; @@ -2720,7 +2720,7 @@ static int make_raw_rw_request(void) in_sector_offset = (fsector_t % _floppy->sect) % ssize; aligned_sector_t = fsector_t - in_sector_offset; - max_size = current_req->nr_sectors; + max_size = blk_rq_sectors(current_req); if ((raw_cmd->track == buffer_track) && (current_drive == buffer_drive) && (fsector_t >= buffer_min) && (fsector_t < buffer_max)) { @@ -2729,10 +2729,10 @@ static int make_raw_rw_request(void) copy_buffer(1, max_sector, buffer_max); return 1; } - } else if (in_sector_offset || current_req->nr_sectors < ssize) { + } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) { if (CT(COMMAND) == FD_WRITE) { - if (fsector_t + current_req->nr_sectors > ssize && - fsector_t + current_req->nr_sectors < ssize + ssize) + if (fsector_t + blk_rq_sectors(current_req) > ssize && + fsector_t + blk_rq_sectors(current_req) < ssize + ssize) max_size = ssize + ssize; else max_size = ssize; @@ -2776,7 +2776,7 @@ static int make_raw_rw_request(void) (indirect * 2 > direct * 3 && *errors < DP->max_errors.read_track && ((!probing || (DP->read_track & (1 << DRS->probed_format)))))) { - max_size = current_req->nr_sectors; + max_size = blk_rq_sectors(current_req); } else { raw_cmd->kernel_data = current_req->buffer; raw_cmd->length = current_count_sectors << 9; @@ -2801,7 +2801,7 @@ static int make_raw_rw_request(void) fsector_t > buffer_max || fsector_t < buffer_min || ((CT(COMMAND) == FD_READ || - (!in_sector_offset && current_req->nr_sectors >= ssize)) && + (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) && max_sector > 2 * max_buffer_sectors + buffer_min && max_size + fsector_t > 2 * max_buffer_sectors + buffer_min) /* not enough space */ @@ -2879,8 +2879,8 @@ static int make_raw_rw_request(void) printk("write\n"); return 0; } - } else if (raw_cmd->length > current_req->nr_sectors << 9 || - current_count_sectors > current_req->nr_sectors) { + } else if (raw_cmd->length > blk_rq_sectors(current_req) << 9 || + current_count_sectors > blk_rq_sectors(current_req)) { DPRINT("buffer overrun in direct transfer\n"); return 0; } else if (raw_cmd->length < current_count_sectors << 9) { @@ -2990,8 +2990,9 @@ static void do_fd_request(struct request_queue * q) if (usage_count == 0) { printk("warning: usage count=0, current_req=%p exiting\n", current_req); - printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector, - current_req->cmd_type, current_req->cmd_flags); + printk("sect=%ld type=%x flags=%x\n", + (long)blk_rq_pos(current_req), current_req->cmd_type, + current_req->cmd_flags); return; } if (test_bit(0, &fdc_busy)) { diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 75b9ca95c4e..a3b39940ce0 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -228,7 +228,7 @@ static void dump_status(const char *msg, unsigned int stat) printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); if (CURRENT) - printk(", sector=%ld", CURRENT->sector); + printk(", sector=%ld", blk_rq_pos(CURRENT)); } printk("\n"); } @@ -457,9 +457,9 @@ ok_to_read: req = CURRENT; insw(HD_DATA, req->buffer, 256); #ifdef DEBUG - printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", - req->rq_disk->disk_name, req->sector + 1, req->nr_sectors - 1, - req->buffer+512); + printk("%s: read: sector %ld, remaining = %u, buffer=%p\n", + req->rq_disk->disk_name, blk_rq_pos(req) + 1, + blk_rq_sectors(req) - 1, req->buffer+512); #endif if (__blk_end_request(req, 0, 512)) { SET_HANDLER(&read_intr); @@ -485,7 +485,7 @@ static void write_intr(void) continue; if (!OK_STATUS(i)) break; - if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) + if ((blk_rq_sectors(req) <= 1) || (i & DRQ_STAT)) goto ok_to_write; } while (--retries > 0); dump_status("write_intr", i); @@ -589,8 +589,8 @@ repeat: return; } disk = req->rq_disk->private_data; - block = req->sector; - nsect = req->nr_sectors; + block = blk_rq_pos(req); + nsect = blk_rq_sectors(req); if (block >= get_capacity(req->rq_disk) || ((block+nsect) > get_capacity(req->rq_disk))) { printk("%s: bad access: block=%d, count=%d\n", diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 71e56cc28ca..826c3492b9f 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -220,7 +220,8 @@ static void mg_dump_status(const char *msg, unsigned int stat, if (host->breq) { req = elv_next_request(host->breq); if (req) - printk(", sector=%u", (u32)req->sector); + printk(", sector=%u", + (unsigned int)blk_rq_pos(req)); } } @@ -493,12 +494,12 @@ static void mg_read(struct request *req) u32 j; struct mg_host *host = req->rq_disk->private_data; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) != - MG_ERR_NONE) + if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req), + MG_CMD_RD, NULL) != MG_ERR_NONE) mg_bad_rw_intr(host); MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", - req->nr_sectors, req->sector, req->buffer); + blk_rq_sectors(req), blk_rq_pos(req), req->buffer); do { u16 *buff = (u16 *)req->buffer; @@ -522,14 +523,14 @@ static void mg_write(struct request *req) u32 j; struct mg_host *host = req->rq_disk->private_data; - if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) != - MG_ERR_NONE) { + if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req), + MG_CMD_WR, NULL) != MG_ERR_NONE) { mg_bad_rw_intr(host); return; } MG_DBG("requested %d sects (from %ld), buffer=0x%p\n", - req->nr_sectors, req->sector, req->buffer); + blk_rq_sectors(req), blk_rq_pos(req), req->buffer); do { u16 *buff = (u16 *)req->buffer; @@ -579,7 +580,7 @@ ok_to_read: (i << 1)); MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n", - req->sector, req->nr_sectors - 1, req->buffer); + blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer); /* send read confirm */ outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); @@ -609,7 +610,7 @@ static void mg_write_intr(struct mg_host *host) break; if (!MG_READY_OK(i)) break; - if ((req->nr_sectors <= 1) || (i & ATA_DRQ)) + if ((blk_rq_sectors(req) <= 1) || (i & ATA_DRQ)) goto ok_to_write; } while (0); mg_dump_status("mg_write_intr", i, host); @@ -627,7 +628,7 @@ ok_to_write: buff++; } MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n", - req->sector, req->nr_sectors, req->buffer); + blk_rq_pos(req), blk_rq_sectors(req), req->buffer); host->mg_do_intr = mg_write_intr; mod_timer(&host->timer, jiffies + 3 * HZ); } @@ -749,9 +750,9 @@ static void mg_request(struct request_queue *q) del_timer(&host->timer); - sect_num = req->sector; + sect_num = blk_rq_pos(req); /* deal whole segments */ - sect_cnt = req->nr_sectors; + sect_cnt = blk_rq_sectors(req); /* sanity check */ if (sect_num >= get_capacity(req->rq_disk) || diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index a9ab8be9d92..977a5737793 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -110,7 +110,7 @@ static void nbd_end_request(struct request *req) req, error ? "failed" : "done"); spin_lock_irqsave(q->queue_lock, flags); - __blk_end_request(req, error, req->nr_sectors << 9); + __blk_end_request(req, error, blk_rq_sectors(req) << 9); spin_unlock_irqrestore(q->queue_lock, flags); } @@ -231,19 +231,19 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req) { int result, flags; struct nbd_request request; - unsigned long size = req->nr_sectors << 9; + unsigned long size = blk_rq_sectors(req) << 9; request.magic = htonl(NBD_REQUEST_MAGIC); request.type = htonl(nbd_cmd(req)); - request.from = cpu_to_be64((u64) req->sector << 9); + request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9); request.len = htonl(size); memcpy(request.handle, &req, sizeof(req)); - dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%luB)\n", + dprintk(DBG_TX, "%s: request %p: sending control (%s@%llu,%uB)\n", lo->disk->disk_name, req, nbdcmd_to_ascii(nbd_cmd(req)), - (unsigned long long)req->sector << 9, - req->nr_sectors << 9); + (unsigned long long)blk_rq_pos(req) << 9, + blk_rq_sectors(req) << 9); result = sock_xmit(lo, 1, &request, sizeof(request), (nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0); if (result <= 0) { diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index 9fd57c2aa46..2d5dc0af55e 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -728,8 +728,8 @@ static void do_pcd_request(struct request_queue * q) if (cd != pcd_current) pcd_bufblk = -1; pcd_current = cd; - pcd_sector = pcd_req->sector; - pcd_count = pcd_req->current_nr_sectors; + pcd_sector = blk_rq_pos(pcd_req); + pcd_count = blk_rq_cur_sectors(pcd_req); pcd_buf = pcd_req->buffer; pcd_busy = 1; ps_set_intr(do_pcd_read, NULL, 0, nice); diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 0732df4e901..9ec5d4ac0b6 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -444,11 +444,11 @@ static enum action do_pd_io_start(void) pd_cmd = rq_data_dir(pd_req); if (pd_cmd == READ || pd_cmd == WRITE) { - pd_block = pd_req->sector; - pd_count = pd_req->current_nr_sectors; + pd_block = blk_rq_pos(pd_req); + pd_count = blk_rq_cur_sectors(pd_req); if (pd_block + pd_count > get_capacity(pd_req->rq_disk)) return Fail; - pd_run = pd_req->nr_sectors; + pd_run = blk_rq_sectors(pd_req); pd_buf = pd_req->buffer; pd_retries = 0; if (pd_cmd == READ) @@ -479,7 +479,7 @@ static int pd_next_buf(void) return 0; spin_lock_irqsave(&pd_lock, saved_flags); __blk_end_request_cur(pd_req, 0); - pd_count = pd_req->current_nr_sectors; + pd_count = blk_rq_cur_sectors(pd_req); pd_buf = pd_req->buffer; spin_unlock_irqrestore(&pd_lock, saved_flags); return 0; diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index 3871e3586d6..e88c889aa7f 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -768,9 +768,9 @@ repeat: return; pf_current = pf_req->rq_disk->private_data; - pf_block = pf_req->sector; - pf_run = pf_req->nr_sectors; - pf_count = pf_req->current_nr_sectors; + pf_block = blk_rq_pos(pf_req); + pf_run = blk_rq_sectors(pf_req); + pf_count = blk_rq_cur_sectors(pf_req); if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) { pf_end_request(-EIO); @@ -810,7 +810,7 @@ static int pf_next_buf(void) spin_unlock_irqrestore(&pf_spin_lock, saved_flags); if (!pf_req) return 1; - pf_count = pf_req->current_nr_sectors; + pf_count = blk_rq_cur_sectors(pf_req); pf_buf = pf_req->buffer; } return 0; diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index c2388673684..8d583081b50 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -134,13 +134,12 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev, rq_for_each_segment(bv, req, iter) n++; dev_dbg(&dev->sbd.core, - "%s:%u: %s req has %u bvecs for %lu sectors %lu hard sectors\n", - __func__, __LINE__, op, n, req->nr_sectors, - blk_rq_sectors(req)); + "%s:%u: %s req has %u bvecs for %u sectors\n", + __func__, __LINE__, op, n, blk_rq_sectors(req)); #endif - start_sector = req->sector * priv->blocking_factor; - sectors = req->nr_sectors * priv->blocking_factor; + start_sector = blk_rq_pos(req) * priv->blocking_factor; + sectors = blk_rq_sectors(req) * priv->blocking_factor; dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n", __func__, __LINE__, op, sectors, start_sector); diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index f59887c5ffb..9f351bfa15e 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -416,7 +416,7 @@ static int __send_request(struct request *req) desc->slice = 0; } desc->status = ~0; - desc->offset = (req->sector << 9) / port->vdisk_block_size; + desc->offset = (blk_rq_pos(req) << 9) / port->vdisk_block_size; desc->size = len; desc->ncookies = err; diff --git a/drivers/block/swim.c b/drivers/block/swim.c index 97ef4266c4c..fc6a1c32293 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -531,7 +531,7 @@ static void redo_fd_request(struct request_queue *q) while ((req = elv_next_request(q))) { fs = req->rq_disk->private_data; - if (req->sector < 0 || req->sector >= fs->total_secs) { + if (blk_rq_pos(req) >= fs->total_secs) { __blk_end_request_cur(req, -EIO); continue; } @@ -551,8 +551,8 @@ static void redo_fd_request(struct request_queue *q) __blk_end_request_cur(req, -EIO); break; case READ: - if (floppy_read_sectors(fs, req->sector, - req->current_nr_sectors, + if (floppy_read_sectors(fs, blk_rq_pos(req), + blk_rq_cur_sectors(req), req->buffer)) { __blk_end_request_cur(req, -EIO); continue; diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index 424855945b9..c1b9a4dc11b 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -312,14 +312,14 @@ static void start_request(struct floppy_state *fs) } while (fs->state == idle && (req = elv_next_request(swim3_queue))) { #if 0 - printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n", + printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", req->rq_disk->disk_name, req->cmd, - (long)req->sector, req->nr_sectors, req->buffer); - printk(" errors=%d current_nr_sectors=%ld\n", - req->errors, req->current_nr_sectors); + (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer); + printk(" errors=%d current_nr_sectors=%u\n", + req->errors, blk_rq_cur_sectors(req)); #endif - if (req->sector >= fs->total_secs) { + if (blk_rq_pos(req) >= fs->total_secs) { __blk_end_request_cur(req, -EIO); continue; } @@ -337,13 +337,14 @@ static void start_request(struct floppy_state *fs) } } - /* Do not remove the cast. req->sector is now a sector_t and - * can be 64 bits, but it will never go past 32 bits for this - * driver anyway, so we can safely cast it down and not have - * to do a 64/32 division + /* Do not remove the cast. blk_rq_pos(req) is now a + * sector_t and can be 64 bits, but it will never go + * past 32 bits for this driver anyway, so we can + * safely cast it down and not have to do a 64/32 + * division */ - fs->req_cyl = ((long)req->sector) / fs->secpercyl; - x = ((long)req->sector) % fs->secpercyl; + fs->req_cyl = ((long)blk_rq_pos(req)) / fs->secpercyl; + x = ((long)blk_rq_pos(req)) % fs->secpercyl; fs->head = x / fs->secpertrack; fs->req_sector = x % fs->secpertrack + 1; fd_req = req; @@ -420,7 +421,7 @@ static inline void setup_transfer(struct floppy_state *fs) struct dbdma_cmd *cp = fs->dma_cmd; struct dbdma_regs __iomem *dr = fs->dma; - if (fd_req->current_nr_sectors <= 0) { + if (blk_rq_cur_sectors(fd_req) <= 0) { printk(KERN_ERR "swim3: transfer 0 sectors?\n"); return; } @@ -428,8 +429,8 @@ static inline void setup_transfer(struct floppy_state *fs) n = 1; else { n = fs->secpertrack - fs->req_sector + 1; - if (n > fd_req->current_nr_sectors) - n = fd_req->current_nr_sectors; + if (n > blk_rq_cur_sectors(fd_req)) + n = blk_rq_cur_sectors(fd_req); } fs->scount = n; swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0); @@ -600,7 +601,8 @@ static void xfer_timeout(unsigned long data) out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION); out_8(&sw->select, RELAX); printk(KERN_ERR "swim3: timeout %sing sector %ld\n", - (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)fd_req->sector); + (rq_data_dir(fd_req)==WRITE? "writ": "read"), + (long)blk_rq_pos(fd_req)); __blk_end_request_cur(fd_req, -EIO); fs->state = idle; start_request(fs); @@ -714,7 +716,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) } else { printk("swim3: error %sing block %ld (err=%x)\n", rq_data_dir(fd_req) == WRITE? "writ": "read", - (long)fd_req->sector, err); + (long)blk_rq_pos(fd_req), err); __blk_end_request_cur(fd_req, -EIO); fs->state = idle; } diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index 60e85bb6f79..087c94c8b2d 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -903,10 +903,10 @@ queue_one_request: msg->sg_count = n_elem; msg->sg_type = SGT_32BIT; msg->handle = cpu_to_le32(TAG_ENCODE(crq->tag)); - msg->lba = cpu_to_le32(rq->sector & 0xffffffff); - tmp = (rq->sector >> 16) >> 16; + msg->lba = cpu_to_le32(blk_rq_pos(rq) & 0xffffffff); + tmp = (blk_rq_pos(rq) >> 16) >> 16; msg->lba_high = cpu_to_le16( (u16) tmp ); - msg->lba_count = cpu_to_le16(rq->nr_sectors); + msg->lba_count = cpu_to_le16(blk_rq_sectors(rq)); msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg); for (i = 0; i < n_elem; i++) { diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 8c2cc71327e..dc3b899ad2b 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -726,8 +726,8 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, * The call to blk_queue_hardsect_size() guarantees that request * is aligned, but it is given in terms of 512 byte units, always. */ - block = rq->sector >> lun->capacity.bshift; - nblks = rq->nr_sectors >> lun->capacity.bshift; + block = blk_rq_pos(rq) >> lun->capacity.bshift; + nblks = blk_rq_sectors(rq) >> lun->capacity.bshift; cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ @@ -739,7 +739,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb[8] = nblks; cmd->cdb_len = 10; - cmd->len = rq->nr_sectors * 512; + cmd->len = blk_rq_sectors(rq) * 512; } static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index e821eed7132..2086cb12d3e 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -252,7 +252,7 @@ static int send_request(struct request *req) struct viodasd_device *d; unsigned long flags; - start = (u64)req->sector << 9; + start = (u64)blk_rq_pos(req) << 9; if (rq_data_dir(req) == READ) { direction = DMA_FROM_DEVICE; diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 50745e64414..1980ab45635 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -85,7 +85,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, vbr->req = req; if (blk_fs_request(vbr->req)) { vbr->out_hdr.type = 0; - vbr->out_hdr.sector = vbr->req->sector; + vbr->out_hdr.sector = blk_rq_pos(vbr->req); vbr->out_hdr.ioprio = req_get_ioprio(vbr->req); } else if (blk_pc_request(vbr->req)) { vbr->out_hdr.type = VIRTIO_BLK_T_SCSI_CMD; diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 14be4c1ed1a..4ef88018bcd 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -306,8 +306,8 @@ static void do_xd_request (struct request_queue * q) return; while ((req = elv_next_request(q)) != NULL) { - unsigned block = req->sector; - unsigned count = req->nr_sectors; + unsigned block = blk_rq_pos(req); + unsigned count = blk_rq_sectors(req); XD_INFO *disk = req->rq_disk->private_data; int res = 0; int retry; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b4564479f64..91fc56597e9 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -231,7 +231,7 @@ static int blkif_queue_request(struct request *req) info->shadow[id].request = (unsigned long)req; ring_req->id = id; - ring_req->sector_number = (blkif_sector_t)req->sector; + ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req); ring_req->handle = info->handle; ring_req->operation = rq_data_dir(req) ? @@ -310,11 +310,10 @@ static void do_blkif_request(struct request_queue *rq) goto wait; pr_debug("do_blk_req %p: cmd %p, sec %lx, " - "(%u/%li) buffer:%p [%s]\n", - req, req->cmd, (unsigned long)req->sector, - req->current_nr_sectors, - req->nr_sectors, req->buffer, - rq_data_dir(req) ? "write" : "read"); + "(%u/%u) buffer:%p [%s]\n", + req, req->cmd, (unsigned long)blk_rq_pos(req), + blk_rq_cur_sectors(req), blk_rq_sectors(req), + req->buffer, rq_data_dir(req) ? "write" : "read"); blkdev_dequeue_request(req); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 5722931d14c..97c99b43f88 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -646,13 +646,14 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n", - (unsigned long long) req->sector, blk_rq_sectors(req), - req->current_nr_sectors, rq_data_dir(req)); + (unsigned long long)blk_rq_pos(req), + blk_rq_sectors(req), blk_rq_cur_sectors(req), + rq_data_dir(req)); ace->req = req; ace->data_ptr = req->buffer; - ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR; - ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF); + ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR; + ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF); count = blk_rq_sectors(req); if (rq_data_dir(req)) { @@ -688,7 +689,7 @@ static void ace_fsm_dostate(struct ace_device *ace) dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n", ace->fsm_task, ace->fsm_iter_num, - ace->req->current_nr_sectors * 16, + blk_rq_cur_sectors(ace->req) * 16, ace->data_count, ace->in_irq); ace_fsm_yield(ace); /* need to poll CFBSY bit */ break; @@ -697,7 +698,7 @@ static void ace_fsm_dostate(struct ace_device *ace) dev_dbg(ace->dev, "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n", ace->fsm_task, ace->fsm_iter_num, - ace->req->current_nr_sectors * 16, + blk_rq_cur_sectors(ace->req) * 16, ace->data_count, ace->in_irq); ace_fsm_yieldirq(ace); break; @@ -721,10 +722,10 @@ static void ace_fsm_dostate(struct ace_device *ace) blk_rq_cur_bytes(ace->req))) { /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", * blk_rq_sectors(ace->req), - * ace->req->current_nr_sectors); + * blk_rq_cur_sectors(ace->req)); */ ace->data_ptr = ace->req->buffer; - ace->data_count = ace->req->current_nr_sectors * 16; + ace->data_count = blk_rq_cur_sectors(ace->req) * 16; ace_fsm_yieldirq(ace); break; } diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index b66ad58a3c3..d4e6b71f514 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -71,12 +71,12 @@ static void do_z2_request(struct request_queue *q) { struct request *req; while ((req = elv_next_request(q)) != NULL) { - unsigned long start = req->sector << 9; - unsigned long len = req->current_nr_sectors << 9; + unsigned long start = blk_rq_pos(req) << 9; + unsigned long len = blk_rq_cur_sectors(req) << 9; if (start + len > z2ram_size) { printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n", - req->sector, req->current_nr_sectors); + blk_rq_pos(req), blk_rq_cur_sectors(req)); __blk_end_request_cur(req, -EIO); continue; } diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index cab2b1fb2fe..488423cab51 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -584,8 +584,8 @@ static void gdrom_readdisk_dma(struct work_struct *work) list_for_each_safe(elem, next, &gdrom_deferred) { req = list_entry(elem, struct request, queuelist); spin_unlock(&gdrom_lock); - block = req->sector/GD_TO_BLK + GD_SESSION_OFFSET; - block_cnt = req->nr_sectors/GD_TO_BLK; + block = blk_rq_pos(req)/GD_TO_BLK + GD_SESSION_OFFSET; + block_cnt = blk_rq_sectors(req)/GD_TO_BLK; ctrl_outl(PHYSADDR(req->buffer), GDROM_DMA_STARTADDR_REG); ctrl_outl(block_cnt * GDROM_HARD_SECTOR, GDROM_DMA_LENGTH_REG); ctrl_outl(1, GDROM_DMA_DIRECTION_REG); @@ -661,7 +661,7 @@ static void gdrom_request(struct request_queue *rq) printk(" write request ignored\n"); __blk_end_request_cur(req, -EIO); } - if (req->nr_sectors) + if (blk_rq_sectors(req)) gdrom_request_handler_dma(req); else __blk_end_request_cur(req, -EIO); diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index cc3efa096e1..6e190a93d8d 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -282,7 +282,7 @@ static int send_request(struct request *req) viopath_targetinst(viopath_hostLp), (u64)req, VIOVERSION << 16, ((u64)DEVICE_NR(diskinfo) << 48) | dmaaddr, - (u64)req->sector * 512, len, 0); + (u64)blk_rq_pos(req) * 512, len, 0); if (hvrc != HvLpEvent_Rc_Good) { printk(VIOCD_KERN_WARNING "hv error on op %d\n", (int)hvrc); return -1; diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index a41634699f8..9e600d22f40 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -677,10 +677,10 @@ try_again: continue; } - t_sec = msb->block_req->sector << 9; + t_sec = blk_rq_pos(msb->block_req) << 9; sector_div(t_sec, msb->page_size); - count = msb->block_req->nr_sectors << 9; + count = blk_rq_sectors(msb->block_req) << 9; count /= msb->page_size; param.system = msb->system; @@ -745,7 +745,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error) t_len *= msb->page_size; } } else - t_len = msb->block_req->nr_sectors << 9; + t_len = blk_rq_sectors(msb->block_req) << 9; dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 56e60f0d531..510eb472637 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -761,7 +761,7 @@ static int i2o_block_transfer(struct request *req) break; case CACHE_SMARTFETCH: - if (req->nr_sectors > 16) + if (blk_rq_sectors(req) > 16) ctl_flags = 0x201F0008; else ctl_flags = 0x001F0000; @@ -781,13 +781,13 @@ static int i2o_block_transfer(struct request *req) ctl_flags = 0x001F0010; break; case CACHE_SMARTBACK: - if (req->nr_sectors > 16) + if (blk_rq_sectors(req) > 16) ctl_flags = 0x001F0004; else ctl_flags = 0x001F0010; break; case CACHE_SMARTTHROUGH: - if (req->nr_sectors > 16) + if (blk_rq_sectors(req) > 16) ctl_flags = 0x001F0004; else ctl_flags = 0x001F0010; @@ -827,22 +827,24 @@ static int i2o_block_transfer(struct request *req) *mptr++ = cpu_to_le32(scsi_flags); - *((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec); - *((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec); + *((u32 *) & cmd[2]) = cpu_to_be32(blk_rq_pos(req) * hwsec); + *((u16 *) & cmd[7]) = cpu_to_be16(blk_rq_sectors(req) * hwsec); memcpy(mptr, cmd, 10); mptr += 4; - *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT); + *mptr++ = + cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); } else #endif { msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); *mptr++ = cpu_to_le32(ctl_flags); - *mptr++ = cpu_to_le32(req->nr_sectors << KERNEL_SECTOR_SHIFT); *mptr++ = - cpu_to_le32((u32) (req->sector << KERNEL_SECTOR_SHIFT)); + cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); + *mptr++ = + cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT)); *mptr++ = - cpu_to_le32(req->sector >> (32 - KERNEL_SECTOR_SHIFT)); + cpu_to_le32(blk_rq_pos(req) >> (32 - KERNEL_SECTOR_SHIFT)); } if (!i2o_block_sglist_alloc(c, ireq, &mptr)) { diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index fe8041e619e..949e99770ad 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -243,7 +243,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.mrq.cmd = &brq.cmd; brq.mrq.data = &brq.data; - brq.cmd.arg = req->sector; + brq.cmd.arg = blk_rq_pos(req); if (!mmc_card_blockaddr(card)) brq.cmd.arg <<= 9; brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; @@ -251,7 +251,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.stop.opcode = MMC_STOP_TRANSMISSION; brq.stop.arg = 0; brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - brq.data.blocks = req->nr_sectors; + brq.data.blocks = blk_rq_sectors(req); /* * After a read error, we redo the request one sector at a time @@ -293,7 +293,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * Adjust the sg list so it is the same size as the * request. */ - if (brq.data.blocks != req->nr_sectors) { + if (brq.data.blocks != blk_rq_sectors(req)) { int i, data_size = brq.data.blocks << 9; struct scatterlist *sg; @@ -344,8 +344,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) printk(KERN_ERR "%s: error %d transferring data," " sector %u, nr %u, card status %#x\n", req->rq_disk->disk_name, brq.data.error, - (unsigned)req->sector, - (unsigned)req->nr_sectors, status); + (unsigned)blk_rq_pos(req), + (unsigned)blk_rq_sectors(req), status); } if (brq.stop.error) { diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 76c4c8d1307..4ea2e67ac97 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -47,8 +47,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, unsigned long block, nsect; char *buf; - block = req->sector << 9 >> tr->blkshift; - nsect = req->current_nr_sectors << 9 >> tr->blkshift; + block = blk_rq_pos(req) << 9 >> tr->blkshift; + nsect = blk_rq_cur_sectors(req) << 9 >> tr->blkshift; buf = req->buffer; @@ -59,7 +59,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, if (!blk_fs_request(req)) return -EIO; - if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk)) + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > + get_capacity(req->rq_disk)) return -EIO; switch(rq_data_dir(req)) { diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index fabec95686b..7df03c7aea0 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -603,7 +603,7 @@ static void dasd_profile_end(struct dasd_block *block, if (dasd_profile_level != DASD_PROFILE_ON) return; - sectors = req->nr_sectors; + sectors = blk_rq_sectors(req); if (!cqr->buildclk || !cqr->startclk || !cqr->stopclk || !cqr->endclk || !sectors) diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index b9a7f773344..2efaddfae56 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -505,8 +505,9 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev, return ERR_PTR(-EINVAL); blksize = block->bp_block; /* Calculate record id of first and last block. */ - first_rec = req->sector >> block->s2b_shift; - last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift; + first_rec = blk_rq_pos(req) >> block->s2b_shift; + last_rec = + (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift; /* Check struct bio and count the number of blocks for the request. */ count = 0; rq_for_each_segment(bv, req, iter) { diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index cb52da033f0..a41c94053e6 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -2354,10 +2354,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev, blksize = block->bp_block; blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize); /* Calculate record id of first and last block. */ - first_rec = first_trk = req->sector >> block->s2b_shift; + first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift; first_offs = sector_div(first_trk, blk_per_trk); last_rec = last_trk = - (req->sector + req->nr_sectors - 1) >> block->s2b_shift; + (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift; last_offs = sector_div(last_trk, blk_per_trk); cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk); @@ -2420,7 +2420,7 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req) private = (struct dasd_eckd_private *) cqr->block->base->private; blksize = cqr->block->bp_block; blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize); - recid = req->sector >> cqr->block->s2b_shift; + recid = blk_rq_pos(req) >> cqr->block->s2b_shift; ccw = cqr->cpaddr; /* Skip over define extent & locate record. */ ccw++; diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index a3eb6fd1467..8912358daa2 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -270,8 +270,9 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev, return ERR_PTR(-EINVAL); blksize = block->bp_block; /* Calculate record id of first and last block. */ - first_rec = req->sector >> block->s2b_shift; - last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift; + first_rec = blk_rq_pos(req) >> block->s2b_shift; + last_rec = + (blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift; /* Check struct bio and count the number of blocks for the request. */ count = 0; cidaw = 0; @@ -309,7 +310,7 @@ static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev, ccw = cqr->cpaddr; /* First ccw is define extent. */ define_extent(ccw++, cqr->data, rq_data_dir(req), - block->bp_block, req->sector, req->nr_sectors); + block->bp_block, blk_rq_pos(req), blk_rq_sectors(req)); /* Build locate_record + read/write ccws. */ idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data)); LO_data = (struct LO_fba_data *) (idaws + cidaw); diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 5f8e8ef43dd..2d00a383a47 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -1134,7 +1134,7 @@ tape_34xx_bread(struct tape_device *device, struct request *req) /* Setup ccws. */ request->op = TO_BLOCK; start_block = (struct tape_34xx_block_id *) request->cpdata; - start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B; + start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B; DBF_EVENT(6, "start_block = %i\n", start_block->block); ccw = request->cpaddr; diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 823b05bd0dd..c453b2f3e9f 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -633,7 +633,7 @@ tape_3590_bread(struct tape_device *device, struct request *req) struct req_iterator iter; DBF_EVENT(6, "xBREDid:"); - start_block = req->sector >> TAPEBLOCK_HSEC_S2B; + start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B; DBF_EVENT(6, "start_block = %i\n", start_block); rq_for_each_segment(bv, req, iter) diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 86596d3813b..5d035e4939d 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -87,7 +87,7 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data) if (ccw_req->rc == 0) /* Update position. */ device->blk_data.block_position = - (req->sector + req->nr_sectors) >> TAPEBLOCK_HSEC_S2B; + (blk_rq_pos(req) + blk_rq_sectors(req)) >> TAPEBLOCK_HSEC_S2B; else /* We lost the position information due to an error. */ device->blk_data.block_position = -1; diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index 09617884a50..2132c906e53 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -188,8 +188,8 @@ static void jsfd_do_request(struct request_queue *q) while ((req = elv_next_request(q)) != NULL) { struct jsfd_part *jdp = req->rq_disk->private_data; - unsigned long offset = req->sector << 9; - size_t len = req->current_nr_sectors << 9; + unsigned long offset = blk_rq_pos(req) << 9; + size_t len = blk_rq_cur_sectors(req) << 9; if ((offset + len) > jdp->dsize) { __blk_end_request_cur(req, -EIO); diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index be5099dd94b..c7076ce25e2 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1825,7 +1825,7 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt, if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) { ha->cp_stat[i] = READY; - flush_dev(SCpnt->device, SCpnt->request->sector, ha, 0); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0); return 0; } @@ -2144,13 +2144,13 @@ static int reorder(struct hostdata *ha, unsigned long cursec, if (!cpp->din) input_only = 0; - if (SCpnt->request->sector < minsec) - minsec = SCpnt->request->sector; - if (SCpnt->request->sector > maxsec) - maxsec = SCpnt->request->sector; + if (blk_rq_pos(SCpnt->request) < minsec) + minsec = blk_rq_pos(SCpnt->request); + if (blk_rq_pos(SCpnt->request) > maxsec) + maxsec = blk_rq_pos(SCpnt->request); - sl[n] = SCpnt->request->sector; - ioseek += SCpnt->request->nr_sectors; + sl[n] = blk_rq_pos(SCpnt->request); + ioseek += blk_rq_sectors(SCpnt->request); if (!n) continue; @@ -2190,7 +2190,7 @@ static int reorder(struct hostdata *ha, unsigned long cursec, k = il[n]; cpp = &ha->cp[k]; SCpnt = cpp->SCpnt; - ll[n] = SCpnt->request->nr_sectors; + ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number; if (!n) @@ -2236,12 +2236,12 @@ static int reorder(struct hostdata *ha, unsigned long cursec, cpp = &ha->cp[k]; SCpnt = cpp->SCpnt; scmd_printk(KERN_INFO, SCpnt, - "%s pid %ld mb %d fc %d nr %d sec %ld ns %ld" + "%s pid %ld mb %d fc %d nr %d sec %ld ns %u" " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n", (ihdlr ? "ihdlr" : "qcomm"), SCpnt->serial_number, k, flushcount, - n_ready, SCpnt->request->sector, - SCpnt->request->nr_sectors, cursec, YESNO(s), + n_ready, blk_rq_pos(SCpnt->request), + blk_rq_sectors(SCpnt->request), cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), YESNO(overlap), cpp->din); } @@ -2408,7 +2408,7 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost) if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) - flush_dev(SCpnt->device, SCpnt->request->sector, ha, 1); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1); tstatus = status_byte(spp->target_status); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 36fd2e75da1..a8fab397711 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1313,10 +1313,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, uint32_t bgstat = bgf->bgstat; uint64_t failing_sector = 0; - printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx " + printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x " "bgstat=0x%x bghm=0x%x\n", cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd), - cmd->request->nr_sectors, bgstat, bghm); + blk_rq_sectors(cmd->request), bgstat, bghm); spin_lock(&_dump_buf_lock); if (!_dump_buf_done) { @@ -2375,15 +2375,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9035 BLKGRD: READ @ sector %llu, " - "count %lu\n", - (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors); + "count %u\n", + (unsigned long long)scsi_get_lba(cmnd), + blk_rq_sectors(cmnd->request)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9036 BLKGRD: WRITE @ sector %llu, " - "count %lu cmd=%p\n", + "count %u cmd=%p\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors, + blk_rq_sectors(cmnd->request), cmnd); err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); @@ -2403,15 +2403,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9040 dbg: READ @ sector %llu, " - "count %lu\n", + "count %u\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors); + blk_rq_sectors(cmnd->request)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9041 dbg: WRITE @ sector %llu, " - "count %lu cmd=%p\n", + "count %u cmd=%p\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors, cmnd); + blk_rq_sectors(cmnd->request), cmnd); else lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9042 dbg: parser not implemented\n"); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 9ff0ca9988a..39b3acfc0dd 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -787,9 +787,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) * Next deal with any sectors which we were able to correctly * handle. */ - SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, " + SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, " "%d bytes done.\n", - req->nr_sectors, good_bytes)); + blk_rq_sectors(req), good_bytes)); /* * Recovered errors need reporting, but they're always treated @@ -968,7 +968,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, if (blk_pc_request(req)) sdb->length = req->data_len; else - sdb->length = req->nr_sectors << 9; + sdb->length = blk_rq_sectors(req) << 9; return BLKPREP_OK; } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3fcb64b91c4..70c4dd99bbf 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -383,9 +383,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct scsi_device *sdp = q->queuedata; struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; - sector_t block = rq->sector; + sector_t block = blk_rq_pos(rq); sector_t threshold; - unsigned int this_count = rq->nr_sectors; + unsigned int this_count = blk_rq_sectors(rq); int ret, host_dif; if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { @@ -412,10 +412,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) this_count)); if (!sdp || !scsi_device_online(sdp) || - block + rq->nr_sectors > get_capacity(disk)) { + block + blk_rq_sectors(rq) > get_capacity(disk)) { SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, - "Finishing %ld sectors\n", - rq->nr_sectors)); + "Finishing %u sectors\n", + blk_rq_sectors(rq))); SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "Retry with 0x%p\n", SCpnt)); goto out; @@ -462,7 +462,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) * for this. */ if (sdp->sector_size == 1024) { - if ((block & 1) || (rq->nr_sectors & 1)) { + if ((block & 1) || (blk_rq_sectors(rq) & 1)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -472,7 +472,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } } if (sdp->sector_size == 2048) { - if ((block & 3) || (rq->nr_sectors & 3)) { + if ((block & 3) || (blk_rq_sectors(rq) & 3)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -482,7 +482,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } } if (sdp->sector_size == 4096) { - if ((block & 7) || (rq->nr_sectors & 7)) { + if ((block & 7) || (blk_rq_sectors(rq) & 7)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -511,10 +511,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, - "%s %d/%ld 512 byte blocks.\n", + "%s %d/%u 512 byte blocks.\n", (rq_data_dir(rq) == WRITE) ? "writing" : "reading", this_count, - rq->nr_sectors)); + blk_rq_sectors(rq))); /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); @@ -970,8 +970,8 @@ static struct block_device_operations sd_fops = { static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) { - u64 start_lba = scmd->request->sector; - u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512); + u64 start_lba = blk_rq_pos(scmd->request); + u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512); u64 bad_lba; int info_valid; diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 184dff49279..82f14a9482d 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -507,7 +507,7 @@ void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes) sector_sz = scmd->device->sector_size; sectors = good_bytes / sector_sz; - phys = scmd->request->sector & 0xffffffff; + phys = blk_rq_pos(scmd->request) & 0xffffffff; if (sector_sz == 4096) phys >>= 3; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 0e1a0f2d2ad..fddba53c7fe 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -292,7 +292,8 @@ static int sr_done(struct scsi_cmnd *SCpnt) if (cd->device->sector_size == 2048) error_sector <<= 2; error_sector &= ~(block_sectors - 1); - good_bytes = (error_sector - SCpnt->request->sector) << 9; + good_bytes = (error_sector - + blk_rq_pos(SCpnt->request)) << 9; if (good_bytes < 0 || good_bytes >= this_count) good_bytes = 0; /* @@ -349,8 +350,8 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) cd->disk->disk_name, block)); if (!cd->device || !scsi_device_online(cd->device)) { - SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", - rq->nr_sectors)); + SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n", + blk_rq_sectors(rq))); SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt)); goto out; } @@ -413,7 +414,7 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) /* * request doesn't start on hw block boundary, add scatter pads */ - if (((unsigned int)rq->sector % (s_size >> 9)) || + if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) || (scsi_bufflen(SCpnt) % s_size)) { scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n"); goto out; @@ -422,14 +423,14 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9); - SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n", + SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n", cd->cdi.name, (rq_data_dir(rq) == WRITE) ? "writing" : "reading", - this_count, rq->nr_sectors)); + this_count, blk_rq_sectors(rq))); SCpnt->cmnd[1] = 0; - block = (unsigned int)rq->sector / (s_size >> 9); + block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9); if (this_count > 0xffff) { this_count = 0xffff; diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 601e95141cb..54023d41fd1 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -1306,7 +1306,7 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) { HD(j)->cp_stat[i] = READY; - flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE); return 0; } @@ -1610,11 +1610,13 @@ static int reorder(unsigned int j, unsigned long cursec, if (!(cpp->xdir == DTD_IN)) input_only = FALSE; - if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector; - if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector; + if (blk_rq_pos(SCpnt->request) < minsec) + minsec = blk_rq_pos(SCpnt->request); + if (blk_rq_pos(SCpnt->request) > maxsec) + maxsec = blk_rq_pos(SCpnt->request); - sl[n] = SCpnt->request->sector; - ioseek += SCpnt->request->nr_sectors; + sl[n] = blk_rq_pos(SCpnt->request); + ioseek += blk_rq_sectors(SCpnt->request); if (!n) continue; @@ -1642,7 +1644,7 @@ static int reorder(unsigned int j, unsigned long cursec, if (!input_only) for (n = 0; n < n_ready; n++) { k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt; - ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number; + ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number; if (!n) continue; @@ -1666,12 +1668,12 @@ static int reorder(unsigned int j, unsigned long cursec, if (link_statistics && (overlap || !(flushcount % link_statistics))) for (n = 0; n < n_ready; n++) { k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt; - printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\ + printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\ " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n", (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready, - SCpnt->request->sector, SCpnt->request->nr_sectors, cursec, - YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), + blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request), + cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), YESNO(overlap), cpp->xdir); } #endif @@ -1799,7 +1801,7 @@ static irqreturn_t ihdlr(unsigned int j) if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) - flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE); tstatus = status_byte(spp->target_status); -- cgit v1.2.3-18-g5258 From 9780e2dd8254351f6cbe11304849126b51dbd561 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:40 +0900 Subject: ide: convert to rq pos and nr_sectors accessors ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo Acked-by: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-cd.c | 8 ++++---- drivers/ide/ide-disk.c | 8 ++++---- drivers/ide/ide-dma.c | 2 +- drivers/ide/ide-floppy.c | 6 +++--- drivers/ide/ide-io.c | 4 ++-- drivers/ide/ide-lib.c | 2 +- drivers/ide/ide-tape.c | 6 +++--- drivers/ide/ide-taskfile.c | 2 +- drivers/ide/pdc202xx_old.c | 2 +- drivers/ide/tc86c001.c | 2 +- drivers/ide/tx4939ide.c | 2 +- 11 files changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 182320dd6ea..eb4f3dc9f18 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -775,8 +775,8 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) } /* fs requests *must* be hardware frame aligned */ - if ((rq->nr_sectors & (sectors_per_frame - 1)) || - (rq->sector & (sectors_per_frame - 1))) + if ((blk_rq_sectors(rq) & (sectors_per_frame - 1)) || + (blk_rq_pos(rq) & (sectors_per_frame - 1))) return ide_stopped; /* use DMA, if possible */ @@ -868,8 +868,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cmd.rq = rq; if (blk_fs_request(rq) || rq->data_len) { - ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? (rq->nr_sectors << 9) - : rq->data_len); + ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? + (blk_rq_sectors(rq) << 9) : rq->data_len); ide_map_sg(drive, &cmd); } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c2438804d3c..ad18e14043c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -82,7 +82,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) { ide_hwif_t *hwif = drive->hwif; - u16 nsectors = (u16)rq->nr_sectors; + u16 nsectors = (u16)blk_rq_sectors(rq); u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48); u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); struct ide_cmd cmd; @@ -90,7 +90,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_startstop_t rc; if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { - if (block + rq->nr_sectors > 1ULL << 28) + if (block + blk_rq_sectors(rq) > 1ULL << 28) dma = 0; else lba48 = 0; @@ -195,9 +195,9 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ledtrig_ide_activity(); - pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n", + pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n", drive->name, rq_data_dir(rq) == READ ? "read" : "writ", - (unsigned long long)block, rq->nr_sectors, + (unsigned long long)block, blk_rq_sectors(rq), (unsigned long)rq->buffer); if (hwif->rw_disk) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d9123ecae4a..001f68f0bb2 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -103,7 +103,7 @@ ide_startstop_t ide_dma_intr(ide_drive_t *drive) ide_finish_cmd(drive, cmd, stat); else ide_complete_rq(drive, 0, - cmd->rq->nr_sectors << 9); + blk_rq_sectors(cmd->rq) << 9); return ide_stopped; } printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n", diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 537b7c55803..1c460bd5637 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -194,7 +194,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive, { struct ide_disk_obj *floppy = drive->driver_data; int block = sector / floppy->bs_factor; - int blocks = rq->nr_sectors / floppy->bs_factor; + int blocks = blk_rq_sectors(rq) / floppy->bs_factor; int cmd = rq_data_dir(rq); ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks); @@ -259,8 +259,8 @@ static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, goto out_end; } if (blk_fs_request(rq)) { - if (((long)rq->sector % floppy->bs_factor) || - (rq->nr_sectors % floppy->bs_factor)) { + if (((long)blk_rq_pos(rq) % floppy->bs_factor) || + (blk_rq_sectors(rq) % floppy->bs_factor)) { printk(KERN_ERR PFX "%s: unsupported r/w rq size\n", drive->name); goto out_end; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index df23bcbd94b..59799ca5524 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -279,7 +279,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, if (cmd) { if (cmd->protocol == ATA_PROT_PIO) { - ide_init_sg_cmd(cmd, rq->nr_sectors << 9); + ide_init_sg_cmd(cmd, blk_rq_sectors(rq) << 9); ide_map_sg(drive, cmd); } @@ -387,7 +387,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) drv = *(struct ide_driver **)rq->rq_disk->private_data; - return drv->do_request(drive, rq, rq->sector); + return drv->do_request(drive, rq, blk_rq_pos(rq)); } return do_special(drive); kill_rq: diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d..05b7fbc7ead 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -114,7 +114,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) if (rq) printk(KERN_CONT ", sector=%llu", - (unsigned long long)rq->sector); + (unsigned long long)blk_rq_pos(rq)); } printk(KERN_CONT "\n"); } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 65c5b705883..c6cf3a951f2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -586,7 +586,7 @@ static void ide_tape_create_rw_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, struct request *rq, u8 opcode) { - unsigned int length = rq->nr_sectors; + unsigned int length = blk_rq_sectors(rq); ide_init_pc(pc); put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); @@ -617,8 +617,8 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" - (unsigned long long)rq->sector, rq->nr_sectors); + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n" + (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); if (!(blk_special_request(rq) || blk_sense_request(rq))) { /* We do not support buffer cache originated requests. */ diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index f400eb4d4af..a0c3e1b2f73 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -385,7 +385,7 @@ out_end: if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) ide_finish_cmd(drive, cmd, stat); else - ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9); + ide_complete_rq(drive, 0, blk_rq_sectors(cmd->rq) << 9); return ide_stopped; out_err: ide_error_cmd(drive, cmd); diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 248a54bd238..c2a16a8f486 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -177,7 +177,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive) u8 clock = inb(high_16 + 0x11); outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11); - word_count = (rq->nr_sectors << 8); + word_count = (blk_rq_sectors(rq) << 8); word_count = (rq_data_dir(rq) == READ) ? word_count | 0x05000000 : word_count | 0x06000000; diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index b4cf42dc8a6..05a93d6baec 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c @@ -112,7 +112,7 @@ static void tc86c001_dma_start(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; unsigned long sc_base = hwif->config_data; unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04); - unsigned long nsectors = hwif->rq->nr_sectors; + unsigned long nsectors = blk_rq_sectors(hwif->rq); /* * We have to manually load the sector count and size into diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 564422d2397..5ca76224f6d 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c @@ -307,7 +307,7 @@ static int tx4939ide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) tx4939ide_writew(SECTOR_SIZE / 2, base, drive->dn ? TX4939IDE_Xfer_Cnt_2 : TX4939IDE_Xfer_Cnt_1); - tx4939ide_writew(cmd->rq->nr_sectors, base, TX4939IDE_Sec_Cnt); + tx4939ide_writew(blk_rq_sectors(cmd->rq), base, TX4939IDE_Sec_Cnt); return 0; } -- cgit v1.2.3-18-g5258 From b0790410300abaaf4f25f702803beff701baebf1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:42 +0900 Subject: block: cleanup rq->data_len usages With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct users to accessors. IDE will be converted in a separate patch. Boaz: spotted incorrect data_len/resid_len conversion in osd. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo Acked-by: Sergei Shtylyov Cc: Pete Zaitcev Cc: Eric Moore Cc: Markus Lidel Cc: Darrick J. Wong Cc: James Bottomley Cc: Eric Moore Cc: Boaz Harrosh Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/ata/libata-scsi.c | 2 +- drivers/block/ub.c | 8 ++++---- drivers/message/fusion/mptsas.c | 20 ++++++++++---------- drivers/message/i2o/i2o_block.c | 2 +- drivers/scsi/libsas/sas_expander.c | 8 ++++---- drivers/scsi/libsas/sas_host_smp.c | 18 +++++++++--------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 21 +++++++++++---------- drivers/scsi/osd/osd_initiator.c | 4 ++-- drivers/scsi/scsi_lib.c | 13 ++++++------- drivers/scsi/scsi_tgt_lib.c | 2 +- 10 files changed, 49 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2733b0c90b7..6e4c600f5a1 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1084,7 +1084,7 @@ static int atapi_drain_needed(struct request *rq) if (likely(!blk_pc_request(rq))) return 0; - if (!rq->data_len || (rq->cmd_flags & REQ_RW)) + if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_RW)) return 0; return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC; diff --git a/drivers/block/ub.c b/drivers/block/ub.c index dc3b899ad2b..1591f61b6c6 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -747,7 +747,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, { struct request *rq = urq->rq; - if (rq->data_len == 0) { + if (blk_rq_bytes(rq) == 0) { cmd->dir = UB_DIR_NONE; } else { if (rq_data_dir(rq) == WRITE) @@ -762,7 +762,7 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); cmd->cdb_len = rq->cmd_len; - cmd->len = rq->data_len; + cmd->len = blk_rq_bytes(rq); /* * To reapply this to every URB is not as incorrect as it looks. @@ -783,8 +783,8 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (cmd->error == 0) { if (blk_pc_request(rq)) { - if (cmd->act_len < rq->data_len) - rq->resid_len = rq->data_len - cmd->act_len; + if (cmd->act_len < blk_rq_bytes(rq)) + rq->resid_len = blk_rq_bytes(rq) - cmd->act_len; scsi_status = 0; } else { if (cmd->act_len != cmd->len) { diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 5d5f34715de..4e6fcf06a6f 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1277,8 +1277,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, /* do we need to support multiple segments? */ if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u %u, rsp %u %u\n", - ioc->name, __func__, req->bio->bi_vcnt, req->data_len, - rsp->bio->bi_vcnt, rsp->data_len); + ioc->name, __func__, req->bio->bi_vcnt, blk_rq_bytes(req), + rsp->bio->bi_vcnt, blk_rq_bytes(rsp)); return -EINVAL; } @@ -1295,7 +1295,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smpreq = (SmpPassthroughRequest_t *)mf; memset(smpreq, 0, sizeof(*smpreq)); - smpreq->RequestDataLength = cpu_to_le16(req->data_len - 4); + smpreq->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); smpreq->Function = MPI_FUNCTION_SMP_PASSTHROUGH; if (rphy) @@ -1321,10 +1321,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, MPI_SGE_FLAGS_END_OF_BUFFER | MPI_SGE_FLAGS_DIRECTION | mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT; - flagsLength |= (req->data_len - 4); + flagsLength |= (blk_rq_bytes(req) - 4); dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio), - req->data_len, PCI_DMA_BIDIRECTIONAL); + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_out) goto put_mf; mpt_add_sge(psge, flagsLength, dma_addr_out); @@ -1332,9 +1332,9 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, /* response */ flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; - flagsLength |= rsp->data_len + 4; + flagsLength |= blk_rq_bytes(rsp) + 4; dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio), - rsp->data_len, PCI_DMA_BIDIRECTIONAL); + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_in) goto unmap; mpt_add_sge(psge, flagsLength, dma_addr_in); @@ -1357,7 +1357,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; memcpy(req->sense, smprep, sizeof(*smprep)); req->sense_len = sizeof(*smprep); - rsp->resid_len = rsp->data_len - smprep->ResponseDataLength; + rsp->resid_len = blk_rq_bytes(rsp) - smprep->ResponseDataLength; } else { printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n", ioc->name, __func__); @@ -1365,10 +1365,10 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, } unmap: if (dma_addr_out) - pci_unmap_single(ioc->pcidev, dma_addr_out, req->data_len, + pci_unmap_single(ioc->pcidev, dma_addr_out, blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (dma_addr_in) - pci_unmap_single(ioc->pcidev, dma_addr_in, rsp->data_len, + pci_unmap_single(ioc->pcidev, dma_addr_in, blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); put_mf: if (mf) diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 510eb472637..6b61d289d6c 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -430,7 +430,7 @@ static void i2o_block_end_request(struct request *req, int error, int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); if (blk_pc_request(req)) - leftover = req->data_len; + leftover = blk_rq_bytes(req); if (error) blk_end_request(req, -EIO, leftover); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 6605ec905cc..531af9ed719 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1927,13 +1927,13 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, /* do we need to support multiple segments? */ if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { printk("%s: multiple segments req %u %u, rsp %u %u\n", - __func__, req->bio->bi_vcnt, req->data_len, - rsp->bio->bi_vcnt, rsp->data_len); + __func__, req->bio->bi_vcnt, blk_rq_bytes(req), + rsp->bio->bi_vcnt, blk_rq_bytes(rsp)); return -EINVAL; } - ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, - bio_data(rsp->bio), rsp->data_len); + ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req), + bio_data(rsp->bio), blk_rq_bytes(rsp)); if (ret > 0) { /* positive number is the untransferred residual */ rsp->resid_len = ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index 89952edd0be..be9a951b977 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -137,21 +137,21 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, int error = -EINVAL; /* eight is the minimum size for request and response frames */ - if (req->data_len < 8 || rsp->data_len < 8) + if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8) goto out; - if (bio_offset(req->bio) + req->data_len > PAGE_SIZE || - bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) { + if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE || + bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) { shost_printk(KERN_ERR, shost, "SMP request/response frame crosses page boundary"); goto out; } - req_data = kzalloc(req->data_len, GFP_KERNEL); + req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL); /* make sure frame can always be built ... we copy * back only the requested length */ - resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL); + resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL); if (!req_data || !resp_data) { error = -ENOMEM; @@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, local_irq_disable(); buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio); - memcpy(req_data, buf, req->data_len); + memcpy(req_data, buf, blk_rq_bytes(req)); kunmap_atomic(buf - bio_offset(req->bio), KM_USER0); local_irq_enable(); @@ -176,8 +176,8 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; - req->resid_len = req->data_len; - rsp->resid_len = rsp->data_len; + req->resid_len = blk_rq_bytes(req); + rsp->resid_len = blk_rq_bytes(rsp); switch (req_data[1]) { case SMP_REPORT_GENERAL: @@ -264,7 +264,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, local_irq_disable(); buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio); - memcpy(buf, resp_data, rsp->data_len); + memcpy(buf, resp_data, blk_rq_bytes(rsp)); flush_kernel_dcache_page(bio_page(rsp->bio)); kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); local_irq_enable(); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index 53759c566bf..af95a449930 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, " "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt, - req->data_len, rsp->bio->bi_vcnt, rsp->data_len); + blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp)); return -EINVAL; } @@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, *((u64 *)&mpi_request->SASAddress) = (rphy) ? cpu_to_le64(rphy->identify.sas_address) : cpu_to_le64(ioc->sas_hba.sas_address); - mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4); + mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); psge = &mpi_request->SGL; /* WRITE sgel first */ @@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), - req->data_len, PCI_DMA_BIDIRECTIONAL); + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_out) { mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); goto unmap; } - ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4), + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4), dma_addr_out); /* incr sgel */ @@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST); sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; - dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), - rsp->data_len, PCI_DMA_BIDIRECTIONAL); + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_in) { mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); goto unmap; } - ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4), + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4), dma_addr_in); dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " @@ -1170,7 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength; + rsp->resid_len = blk_rq_bytes(rsp) - + mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); @@ -1186,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, unmap: if (dma_addr_out) - pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len, + pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (dma_addr_in) - pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len, + pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); out: diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 2a5f0777148..d178a8b799e 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or, return ret; } OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", - _LLU(or->out.total_bytes), or->out.req->data_len); + _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req)); } if (or->in.bio) { ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); @@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or, return ret; } OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", - _LLU(or->in.total_bytes), or->in.req->data_len); + _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req)); } or->out.pad_buff = sg_out_pad_buffer; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 39b3acfc0dd..3d16c70fbde 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers); static void scsi_end_bidi_request(struct scsi_cmnd *cmd) { struct request *req = cmd->request; - unsigned int dlen = req->data_len; - unsigned int next_dlen = req->next_rq->data_len; req->resid_len = scsi_out(cmd)->resid; req->next_rq->resid_len = scsi_in(cmd)->resid; /* The req and req->next_rq have not been completed */ - BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen)); + BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req), + blk_rq_bytes(req->next_rq))); scsi_release_buffers(cmd); @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, BUG_ON(count > sdb->table.nents); sdb->table.nents = count; if (blk_pc_request(req)) - sdb->length = req->data_len; + sdb->length = blk_rq_bytes(req); else sdb->length = blk_rq_sectors(req) << 9; return BLKPREP_OK; @@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) if (unlikely(ret)) return ret; } else { - BUG_ON(req->data_len); + BUG_ON(blk_rq_bytes(req)); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); req->buffer = NULL; } cmd->cmd_len = req->cmd_len; - if (!req->data_len) + if (!blk_rq_bytes(req)) cmd->sc_data_direction = DMA_NONE; else if (rq_data_dir(req) == WRITE) cmd->sc_data_direction = DMA_TO_DEVICE; else cmd->sc_data_direction = DMA_FROM_DEVICE; - cmd->transfersize = req->data_len; + cmd->transfersize = blk_rq_bytes(req); cmd->allowed = req->retries; return BLKPREP_OK; } diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 48ba413f7f6..10303272ba4 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd, * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the * length for us. */ - cmd->sdb.length = rq->data_len; + cmd->sdb.length = blk_rq_bytes(rq); return 0; -- cgit v1.2.3-18-g5258 From 34b7d2c957199834c474c9d46739265643f4d9c7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:43 +0900 Subject: ide: cleanup rq->data_len usages With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all direct users to accessors. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo Acked-by: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 4 ++-- drivers/ide/ide-cd.c | 25 +++++++------------------ drivers/ide/ide-floppy.c | 4 ++-- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-tape.c | 2 +- 5 files changed, 13 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index e4a02a05fc8..792534db8f8 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -255,7 +255,7 @@ void ide_retry_pc(ide_drive_t *drive) ide_init_pc(pc); memcpy(pc->c, sense_rq->cmd, 12); pc->buf = bio_data(sense_rq->bio); /* pointer to mapped address */ - pc->req_xfer = sense_rq->data_len; + pc->req_xfer = blk_rq_bytes(sense_rq); if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); @@ -303,7 +303,7 @@ int ide_cd_get_xferlen(struct request *rq) return 32768; else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) - return rq->data_len; + return blk_rq_bytes(rq); else return 0; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb4f3dc9f18..2eadc9d2e96 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -577,7 +577,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) struct request *rq = hwif->rq; ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors; + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0; int sense = blk_sense_request(rq); unsigned int timeout; u16 len; @@ -707,9 +707,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { - if (blk_end_request(rq, 0, rq->data_len)) - BUG(); - + blk_end_request_all(rq, 0); hwif->rq = NULL; } else { if (sense && uptodate) @@ -727,22 +725,14 @@ out_end: ide_cd_error_cmd(drive, cmd); /* make sure it's fully ended */ - if (blk_pc_request(rq)) - nsectors = (rq->data_len + 511) >> 9; - else - nsectors = blk_rq_sectors(rq); - - if (nsectors == 0) - nsectors = 1; - if (blk_fs_request(rq) == 0) { - rq->resid_len = rq->data_len - + rq->resid_len = blk_rq_bytes(rq) - (cmd->nbytes - cmd->nleft); if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) rq->resid_len += cmd->last_xfer_len; } - ide_complete_rq(drive, uptodate ? 0 : -EIO, nsectors << 9); + ide_complete_rq(drive, uptodate ? 0 : -EIO, blk_rq_bytes(rq)); if (sense && rc == 2) ide_error(drive, "request sense failure", stat); @@ -819,7 +809,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; if ((unsigned long)buf & alignment - || rq->data_len & q->dma_pad_mask + || blk_rq_bytes(rq) & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } @@ -867,9 +857,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cmd.rq = rq; - if (blk_fs_request(rq) || rq->data_len) { - ide_init_sg_cmd(&cmd, blk_fs_request(rq) ? - (blk_rq_sectors(rq) << 9) : rq->data_len); + if (blk_fs_request(rq) || blk_rq_bytes(rq)) { + ide_init_sg_cmd(&cmd, blk_rq_bytes(rq)); ide_map_sg(drive, &cmd); } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1c460bd5637..650981758f1 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -220,14 +220,14 @@ static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy, ide_init_pc(pc); memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; - if (rq->data_len) { + if (blk_rq_bytes(rq)) { pc->flags |= PC_FLAG_DMA_OK; if (rq_data_dir(rq) == WRITE) pc->flags |= PC_FLAG_WRITING; } /* pio will be performed by ide_pio_bytes() which handles sg fine */ pc->buf = NULL; - pc->req_xfer = pc->buf_size = rq->data_len; + pc->req_xfer = pc->buf_size = blk_rq_bytes(rq); } static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive, diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 59799ca5524..ca2519d7b99 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -116,7 +116,7 @@ void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err) unsigned int ide_rq_bytes(struct request *rq) { if (blk_pc_request(rq)) - return rq->data_len; + return blk_rq_bytes(rq); else return blk_rq_cur_sectors(rq) << 9; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index c6cf3a951f2..e16604562f2 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->resid_len = rq->data_len - blocks * tape->blk_size; + rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size; if (pc->error) { uptodate = 0; -- cgit v1.2.3-18-g5258 From 1011c1b9f2e45ce7c6e38888d2b83936aec38771 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:45 +0900 Subject: block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Paul Clements Cc: Pete Zaitcev Cc: Alex Dubov Cc: Markus Lidel Cc: David Woodhouse Cc: James Bottomley Cc: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 7 +++---- drivers/block/nbd.c | 6 +++--- drivers/block/ub.c | 2 +- drivers/block/z2ram.c | 2 +- drivers/memstick/core/mspro_block.c | 4 ++-- drivers/message/i2o/i2o_block.c | 16 ++++------------ drivers/mtd/mtd_blkdevs.c | 2 +- drivers/sbus/char/jsflash.c | 2 +- drivers/scsi/scsi_lib.c | 7 ++----- 9 files changed, 18 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 45248628338..1e27ed9208b 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -2512,8 +2512,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) remaining = current_count_sectors << 9; #ifdef FLOPPY_SANITY_CHECK - if ((remaining >> 9) > blk_rq_sectors(current_req) && - CT(COMMAND) == FD_WRITE) { + if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) { DPRINT("in copy buffer\n"); printk("current_count_sectors=%ld\n", current_count_sectors); printk("remaining=%d\n", remaining >> 9); @@ -2530,7 +2529,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2) dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9); - size = blk_rq_cur_sectors(current_req) << 9; + size = blk_rq_cur_bytes(current_req); rq_for_each_segment(bv, current_req, iter) { if (!remaining) @@ -2879,7 +2878,7 @@ static int make_raw_rw_request(void) printk("write\n"); return 0; } - } else if (raw_cmd->length > blk_rq_sectors(current_req) << 9 || + } else if (raw_cmd->length > blk_rq_bytes(current_req) || current_count_sectors > blk_rq_sectors(current_req)) { DPRINT("buffer overrun in direct transfer\n"); return 0; diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 977a5737793..fad167de23b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -110,7 +110,7 @@ static void nbd_end_request(struct request *req) req, error ? "failed" : "done"); spin_lock_irqsave(q->queue_lock, flags); - __blk_end_request(req, error, blk_rq_sectors(req) << 9); + __blk_end_request_all(req, error); spin_unlock_irqrestore(q->queue_lock, flags); } @@ -231,7 +231,7 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req) { int result, flags; struct nbd_request request; - unsigned long size = blk_rq_sectors(req) << 9; + unsigned long size = blk_rq_bytes(req); request.magic = htonl(NBD_REQUEST_MAGIC); request.type = htonl(nbd_cmd(req)); @@ -243,7 +243,7 @@ static int nbd_send_req(struct nbd_device *lo, struct request *req) lo->disk->disk_name, req, nbdcmd_to_ascii(nbd_cmd(req)), (unsigned long long)blk_rq_pos(req) << 9, - blk_rq_sectors(req) << 9); + blk_rq_bytes(req)); result = sock_xmit(lo, 1, &request, sizeof(request), (nbd_cmd(req) == NBD_CMD_WRITE) ? MSG_MORE : 0); if (result <= 0) { diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 1591f61b6c6..40d03cf63f2 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -739,7 +739,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb[8] = nblks; cmd->cdb_len = 10; - cmd->len = blk_rq_sectors(rq) * 512; + cmd->len = blk_rq_bytes(rq); } static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index d4e6b71f514..6a1383834ec 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -72,7 +72,7 @@ static void do_z2_request(struct request_queue *q) struct request *req; while ((req = elv_next_request(q)) != NULL) { unsigned long start = blk_rq_pos(req) << 9; - unsigned long len = blk_rq_cur_sectors(req) << 9; + unsigned long len = blk_rq_cur_bytes(req); if (start + len > z2ram_size) { printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n", diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 9e600d22f40..93b2c618565 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -680,7 +680,7 @@ try_again: t_sec = blk_rq_pos(msb->block_req) << 9; sector_div(t_sec, msb->page_size); - count = blk_rq_sectors(msb->block_req) << 9; + count = blk_rq_bytes(msb->block_req); count /= msb->page_size; param.system = msb->system; @@ -745,7 +745,7 @@ static int mspro_block_complete_req(struct memstick_dev *card, int error) t_len *= msb->page_size; } } else - t_len = blk_rq_sectors(msb->block_req) << 9; + t_len = blk_rq_bytes(msb->block_req); dev_dbg(&card->dev, "transferred %x (%d)\n", t_len, error); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 6b61d289d6c..e153f5d5237 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -426,15 +426,9 @@ static void i2o_block_end_request(struct request *req, int error, struct request_queue *q = req->q; unsigned long flags; - if (blk_end_request(req, error, nr_bytes)) { - int leftover = (blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); - - if (blk_pc_request(req)) - leftover = blk_rq_bytes(req); - + if (blk_end_request(req, error, nr_bytes)) if (error) - blk_end_request(req, -EIO, leftover); - } + blk_end_request_all(req, -EIO); spin_lock_irqsave(q->queue_lock, flags); @@ -832,15 +826,13 @@ static int i2o_block_transfer(struct request *req) memcpy(mptr, cmd, 10); mptr += 4; - *mptr++ = - cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); + *mptr++ = cpu_to_le32(blk_rq_bytes(req)); } else #endif { msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); *mptr++ = cpu_to_le32(ctl_flags); - *mptr++ = - cpu_to_le32(blk_rq_sectors(req) << KERNEL_SECTOR_SHIFT); + *mptr++ = cpu_to_le32(blk_rq_bytes(req)); *mptr++ = cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT)); *mptr++ = diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 4ea2e67ac97..50c76a2ca76 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -48,7 +48,7 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, char *buf; block = blk_rq_pos(req) << 9 >> tr->blkshift; - nsect = blk_rq_cur_sectors(req) << 9 >> tr->blkshift; + nsect = blk_rq_cur_bytes(req) >> tr->blkshift; buf = req->buffer; diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index 2132c906e53..d56ddaa7703 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -189,7 +189,7 @@ static void jsfd_do_request(struct request_queue *q) while ((req = elv_next_request(q)) != NULL) { struct jsfd_part *jdp = req->rq_disk->private_data; unsigned long offset = blk_rq_pos(req) << 9; - size_t len = blk_rq_cur_sectors(req) << 9; + size_t len = blk_rq_cur_bytes(req); if ((offset + len) > jdp->dsize) { __blk_end_request_cur(req, -EIO); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3d16c70fbde..ee308f6f798 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = blk_rq_sectors(req) << 9; + int leftover = blk_rq_bytes(req); if (blk_pc_request(req)) leftover = req->resid_len; @@ -964,10 +964,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, count = blk_rq_map_sg(req->q, req, sdb->table.sgl); BUG_ON(count > sdb->table.nents); sdb->table.nents = count; - if (blk_pc_request(req)) - sdb->length = blk_rq_bytes(req); - else - sdb->length = blk_rq_sectors(req) << 9; + sdb->length = blk_rq_bytes(req); return BLKPREP_OK; } -- cgit v1.2.3-18-g5258 From 8f6205cd572fece673da0255d74843680f67f879 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:53:59 +0900 Subject: ide: dequeue in-flight request ide generally has single request in flight and tracks it using hwif->rq and all state handlers follow the following convention. * ide_started is returned if the request is in flight. * ide_stopped is returned if the queue needs to be restarted. The request might or might not have been processed fully or partially. * hwif->rq is set to NULL, when an issued request completes. So, dequeueing model can be implemented by dequeueing after fetch, requeueing if hwif->rq isn't NULL on ide_stopped return and doing about the same thing on completion / port unlock paths. These changes can be made in ide-io proper. In addition to the above main changes, the following updates are necessary. * ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it as the request is already dequeued. * ide-atapi uses request queue as stack when issuing REQUEST SENSE to put the REQUEST SENSE in front of the failed request. This now needs to be done using requeueing. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Signed-off-by: Jens Axboe --- drivers/ide/ide-atapi.c | 14 ++++++++++++-- drivers/ide/ide-cd.c | 8 -------- drivers/ide/ide-io.c | 34 +++++++++++++++++++++++++++------- 3 files changed, 39 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 792534db8f8..2874c3d703a 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -246,6 +246,7 @@ EXPORT_SYMBOL_GPL(ide_queue_sense_rq); */ void ide_retry_pc(ide_drive_t *drive) { + struct request *failed_rq = drive->hwif->rq; struct request *sense_rq = &drive->sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; @@ -260,8 +261,17 @@ void ide_retry_pc(ide_drive_t *drive) if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); - if (ide_queue_sense_rq(drive, pc)) - ide_complete_rq(drive, -EIO, blk_rq_bytes(drive->hwif->rq)); + /* + * Push back the failed request and put request sense on top + * of it. The failed command will be retried after sense data + * is acquired. + */ + blk_requeue_request(failed_rq->q, failed_rq); + drive->hwif->rq = NULL; + if (ide_queue_sense_rq(drive, pc)) { + blkdev_dequeue_request(failed_rq); + ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); + } } EXPORT_SYMBOL_GPL(ide_retry_pc); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2eadc9d2e96..4c7792fd5f9 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -405,15 +405,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) end_request: if (stat & ATA_ERR) { - struct request_queue *q = drive->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - blkdev_dequeue_request(rq); - spin_unlock_irqrestore(q->queue_lock, flags); - hwif->rq = NULL; - return ide_queue_sense_rq(drive, rq) ? 2 : 1; } else return 2; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index ca2519d7b99..abda7337b3f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -487,10 +487,10 @@ void do_ide_request(struct request_queue *q) if (!ide_lock_port(hwif)) { ide_hwif_t *prev_port; + + WARN_ON_ONCE(hwif->rq); repeat: prev_port = hwif->host->cur_port; - hwif->rq = NULL; - if (drive->dev_flags & IDE_DFLAG_SLEEPING && time_after(drive->sleep, jiffies)) { ide_unlock_port(hwif); @@ -519,7 +519,12 @@ repeat: * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ - rq = elv_next_request(drive->queue); + if (!rq) { + rq = elv_next_request(drive->queue); + if (rq) + blkdev_dequeue_request(rq); + } + spin_unlock_irq(q->queue_lock); spin_lock_irq(&hwif->lock); @@ -555,8 +560,11 @@ repeat: startstop = start_request(drive, rq); spin_lock_irq(&hwif->lock); - if (startstop == ide_stopped) + if (startstop == ide_stopped) { + rq = hwif->rq; + hwif->rq = NULL; goto repeat; + } } else goto plug_device; out: @@ -572,18 +580,24 @@ plug_device: plug_device_2: spin_lock_irq(q->queue_lock); + if (rq) + blk_requeue_request(q, rq); if (!elv_queue_empty(q)) blk_plug_device(q); } -static void ide_plug_device(ide_drive_t *drive) +static void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq) { struct request_queue *q = drive->queue; unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); + + if (rq) + blk_requeue_request(q, rq); if (!elv_queue_empty(q)) blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); } @@ -632,6 +646,7 @@ void ide_timer_expiry (unsigned long data) unsigned long flags; int wait = -1; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); spin_lock_irqsave(&hwif->lock, flags); @@ -693,6 +708,8 @@ void ide_timer_expiry (unsigned long data) spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); if (startstop == ide_stopped) { + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -701,7 +718,7 @@ void ide_timer_expiry (unsigned long data) if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } } @@ -787,6 +804,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) ide_startstop_t startstop; irqreturn_t irq_ret = IRQ_NONE; int plug_device = 0; + struct request *uninitialized_var(rq_in_flight); if (host->host_flags & IDE_HFLAG_SERIALIZE) { if (hwif != host->cur_port) @@ -866,6 +884,8 @@ irqreturn_t ide_intr (int irq, void *dev_id) */ if (startstop == ide_stopped) { BUG_ON(hwif->handler); + rq_in_flight = hwif->rq; + hwif->rq = NULL; ide_unlock_port(hwif); plug_device = 1; } @@ -875,7 +895,7 @@ out: out_early: if (plug_device) { ide_unlock_host(hwif->host); - ide_plug_device(drive); + ide_requeue_and_plug(drive, rq_in_flight); } return irq_ret; -- cgit v1.2.3-18-g5258 From 9a8d23d8855e554fc5887f14cb008b55c4300ccc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:00 +0900 Subject: mg_disk: fix queue hang / infinite retry on !fs requests Both request functions in mg_disk simply return when they encounter a !fs request, which means the request will never be cleared from the queue causing queue hang and indefinite retry of the request. Fix it. While at it, flatten condition checks and add unlikely to !fs tests. [ Impact: fix possible queue hang / infinite retry of !fs requests ] Signed-off-by: Tejun Heo Cc: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 826c3492b9f..be323880f24 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -672,16 +672,16 @@ static void mg_request_poll(struct request_queue *q) while ((req = elv_next_request(q)) != NULL) { host = req->rq_disk->private_data; - if (blk_fs_request(req)) { - switch (rq_data_dir(req)) { - case READ: - mg_read(req); - break; - case WRITE: - mg_write(req); - break; - } + + if (unlikely(!blk_fs_request(req))) { + __blk_end_request_cur(req, -EIO); + continue; } + + if (rq_data_dir(req) == READ) + mg_read(req); + else + mg_write(req); } } @@ -766,8 +766,10 @@ static void mg_request(struct request_queue *q) continue; } - if (!blk_fs_request(req)) - return; + if (unlikely(!blk_fs_request(req))) { + __blk_end_request_cur(req, -EIO); + continue; + } if (!mg_issue_req(req, host, sect_num, sect_cnt)) return; -- cgit v1.2.3-18-g5258 From 5b36ad6000ddea390aca3c3b67ead7616ace2ffc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:01 +0900 Subject: mg_disk: dequeue and track in-flight request mg_disk has at most single request in flight per device. Till now, whenever it needs to access the in-flight request it called elv_next_request(). This patch makes mg_disk track the in-flight request directly using mg_host->req and dequeue it when processing starts. q->queuedata is set to mg_host so that mg_host can be determined without fetching request from the queue. [ Impact: dequeue in-flight request, one elv_next_request() per request ] Signed-off-by: Tejun Heo Cc: unsik Kim Signed-off-by: Jens Axboe --- drivers/block/mg_disk.c | 109 ++++++++++++++++++++++++++---------------------- 1 file changed, 59 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index be323880f24..1ca5d1423fa 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -135,6 +135,7 @@ struct mg_host { struct device *dev; struct request_queue *breq; + struct request *req; spinlock_t lock; struct gendisk *gd; @@ -171,17 +172,27 @@ struct mg_host { static void mg_request(struct request_queue *); +static bool mg_end_request(struct mg_host *host, int err, unsigned int nr_bytes) +{ + if (__blk_end_request(host->req, err, nr_bytes)) + return true; + + host->req = NULL; + return false; +} + +static bool mg_end_request_cur(struct mg_host *host, int err) +{ + return mg_end_request(host, err, blk_rq_cur_bytes(host->req)); +} + static void mg_dump_status(const char *msg, unsigned int stat, struct mg_host *host) { char *name = MG_DISK_NAME; - struct request *req; - if (host->breq) { - req = elv_next_request(host->breq); - if (req) - name = req->rq_disk->disk_name; - } + if (host->req) + name = host->req->rq_disk->disk_name; printk(KERN_ERR "%s: %s: status=0x%02x { ", name, msg, stat & 0xff); if (stat & ATA_BUSY) @@ -217,13 +228,9 @@ static void mg_dump_status(const char *msg, unsigned int stat, printk("AddrMarkNotFound "); printk("}"); if (host->error & (ATA_BBK | ATA_UNC | ATA_IDNF | ATA_AMNF)) { - if (host->breq) { - req = elv_next_request(host->breq); - if (req) - printk(", sector=%u", - (unsigned int)blk_rq_pos(req)); - } - + if (host->req) + printk(", sector=%u", + (unsigned int)blk_rq_pos(host->req)); } printk("\n"); } @@ -453,11 +460,10 @@ static int mg_disk_init(struct mg_host *host) static void mg_bad_rw_intr(struct mg_host *host) { - struct request *req = elv_next_request(host->breq); - if (req != NULL) - if (++req->errors >= MG_MAX_ERRORS || - host->error == MG_ERR_TIMEOUT) - __blk_end_request_cur(req, -EIO); + if (host->req) + if (++host->req->errors >= MG_MAX_ERRORS || + host->error == MG_ERR_TIMEOUT) + mg_end_request_cur(host, -EIO); } static unsigned int mg_out(struct mg_host *host, @@ -515,7 +521,7 @@ static void mg_read(struct request *req) outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - } while (__blk_end_request(req, 0, MG_SECTOR_SIZE)); + } while (mg_end_request(host, 0, MG_SECTOR_SIZE)); } static void mg_write(struct request *req) @@ -545,14 +551,14 @@ static void mg_write(struct request *req) outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - } while (__blk_end_request(req, 0, MG_SECTOR_SIZE)); + } while (mg_end_request(host, 0, MG_SECTOR_SIZE)); } static void mg_read_intr(struct mg_host *host) { + struct request *req = host->req; u32 i; u16 *buff; - struct request *req; /* check status */ do { @@ -571,7 +577,6 @@ static void mg_read_intr(struct mg_host *host) ok_to_read: /* get current segment of request */ - req = elv_next_request(host->breq); buff = (u16 *)req->buffer; /* read 1 sector */ @@ -585,7 +590,7 @@ ok_to_read: /* send read confirm */ outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base + MG_REG_COMMAND); - if (__blk_end_request(req, 0, MG_SECTOR_SIZE)) { + if (mg_end_request(host, 0, MG_SECTOR_SIZE)) { /* set handler if read remains */ host->mg_do_intr = mg_read_intr; mod_timer(&host->timer, jiffies + 3 * HZ); @@ -595,14 +600,11 @@ ok_to_read: static void mg_write_intr(struct mg_host *host) { + struct request *req = host->req; u32 i, j; u16 *buff; - struct request *req; bool rem; - /* get current segment of request */ - req = elv_next_request(host->breq); - /* check status */ do { i = inb((unsigned long)host->dev_base + MG_REG_STATUS); @@ -619,7 +621,7 @@ static void mg_write_intr(struct mg_host *host) return; ok_to_write: - if ((rem = __blk_end_request(req, 0, MG_SECTOR_SIZE))) { + if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) { /* write 1 sector and set handler if remains */ buff = (u16 *)req->buffer; for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) { @@ -644,44 +646,47 @@ void mg_times_out(unsigned long data) { struct mg_host *host = (struct mg_host *)data; char *name; - struct request *req; spin_lock_irq(&host->lock); - req = elv_next_request(host->breq); - if (!req) + if (!host->req) goto out_unlock; host->mg_do_intr = NULL; - name = req->rq_disk->disk_name; + name = host->req->rq_disk->disk_name; printk(KERN_DEBUG "%s: timeout\n", name); host->error = MG_ERR_TIMEOUT; mg_bad_rw_intr(host); - mg_request(host->breq); out_unlock: + mg_request(host->breq); spin_unlock_irq(&host->lock); } static void mg_request_poll(struct request_queue *q) { - struct request *req; - struct mg_host *host; + struct mg_host *host = q->queuedata; - while ((req = elv_next_request(q)) != NULL) { - host = req->rq_disk->private_data; + while (1) { + if (!host->req) { + host->req = elv_next_request(q); + if (host->req) + blkdev_dequeue_request(host->req); + else + break; + } - if (unlikely(!blk_fs_request(req))) { - __blk_end_request_cur(req, -EIO); + if (unlikely(!blk_fs_request(host->req))) { + mg_end_request_cur(host, -EIO); continue; } - if (rq_data_dir(req) == READ) - mg_read(req); + if (rq_data_dir(host->req) == READ) + mg_read(host->req); else - mg_write(req); + mg_write(host->req); } } @@ -733,16 +738,19 @@ static unsigned int mg_issue_req(struct request *req, /* This function also called from IRQ context */ static void mg_request(struct request_queue *q) { + struct mg_host *host = q->queuedata; struct request *req; - struct mg_host *host; u32 sect_num, sect_cnt; while (1) { - req = elv_next_request(q); - if (!req) - return; - - host = req->rq_disk->private_data; + if (!host->req) { + host->req = elv_next_request(q); + if (host->req) + blkdev_dequeue_request(host->req); + else + break; + } + req = host->req; /* check unwanted request call */ if (host->mg_do_intr) @@ -762,12 +770,12 @@ static void mg_request(struct request_queue *q) "%s: bad access: sector=%d, count=%d\n", req->rq_disk->disk_name, sect_num, sect_cnt); - __blk_end_request_cur(req, -EIO); + mg_end_request_cur(host, -EIO); continue; } if (unlikely(!blk_fs_request(req))) { - __blk_end_request_cur(req, -EIO); + mg_end_request_cur(host, -EIO); continue; } @@ -981,6 +989,7 @@ static int mg_probe(struct platform_device *plat_dev) __func__, __LINE__); goto probe_err_5; } + host->breq->queuedata = host; /* mflash is random device, thanx for the noop */ elevator_exit(host->breq->elevator); -- cgit v1.2.3-18-g5258 From 8a12c4a456c7ee261a85c2cbec835601e6aae05a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:02 +0900 Subject: hd: dequeue and track in-flight request hd has at most single request in flight. Till now, whenever it needs to access the in-flight request it called elv_next_request(). This patch makes hd track the in-flight request directly and dequeue it when processing starts. The added complexity is minimal and this will help future block layer changes. [ Impact: dequeue in-flight request, one elv_next_request() per request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/hd.c | 63 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 40 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/block/hd.c b/drivers/block/hd.c index a3b39940ce0..288ab63c102 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -98,10 +98,9 @@ static DEFINE_SPINLOCK(hd_lock); static struct request_queue *hd_queue; +static struct request *hd_req; #define MAJOR_NR HD_MAJOR -#define QUEUE (hd_queue) -#define CURRENT elv_next_request(hd_queue) #define TIMEOUT_VALUE (6*HZ) #define HD_DELAY 0 @@ -195,11 +194,24 @@ static void __init hd_setup(char *str, int *ints) NR_HD = hdind+1; } +static bool hd_end_request(int err, unsigned int bytes) +{ + if (__blk_end_request(hd_req, err, bytes)) + return true; + hd_req = NULL; + return false; +} + +static bool hd_end_request_cur(int err) +{ + return hd_end_request(err, blk_rq_cur_bytes(hd_req)); +} + static void dump_status(const char *msg, unsigned int stat) { char *name = "hd?"; - if (CURRENT) - name = CURRENT->rq_disk->disk_name; + if (hd_req) + name = hd_req->rq_disk->disk_name; #ifdef VERBOSE_ERRORS printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); @@ -227,8 +239,8 @@ static void dump_status(const char *msg, unsigned int stat) if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); - if (CURRENT) - printk(", sector=%ld", blk_rq_pos(CURRENT)); + if (hd_req) + printk(", sector=%ld", blk_rq_pos(hd_req)); } printk("\n"); } @@ -406,11 +418,12 @@ static void unexpected_hd_interrupt(void) */ static void bad_rw_intr(void) { - struct request *req = CURRENT; + struct request *req = hd_req; + if (req != NULL) { struct hd_i_struct *disk = req->rq_disk->private_data; if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { - __blk_end_request_cur(req, -EIO); + hd_end_request_cur(-EIO); disk->special_op = disk->recalibrate = 1; } else if (req->errors % RESET_FREQ == 0) reset = 1; @@ -454,14 +467,14 @@ static void read_intr(void) return; ok_to_read: - req = CURRENT; + req = hd_req; insw(HD_DATA, req->buffer, 256); #ifdef DEBUG printk("%s: read: sector %ld, remaining = %u, buffer=%p\n", req->rq_disk->disk_name, blk_rq_pos(req) + 1, blk_rq_sectors(req) - 1, req->buffer+512); #endif - if (__blk_end_request(req, 0, 512)) { + if (hd_end_request(0, 512)) { SET_HANDLER(&read_intr); return; } @@ -475,7 +488,7 @@ ok_to_read: static void write_intr(void) { - struct request *req = CURRENT; + struct request *req = hd_req; int i; int retries = 100000; @@ -494,7 +507,7 @@ static void write_intr(void) return; ok_to_write: - if (__blk_end_request(req, 0, 512)) { + if (hd_end_request(0, 512)) { SET_HANDLER(&write_intr); outsw(HD_DATA, req->buffer, 256); return; @@ -525,18 +538,18 @@ static void hd_times_out(unsigned long dummy) do_hd = NULL; - if (!CURRENT) + if (!hd_req) return; spin_lock_irq(hd_queue->queue_lock); reset = 1; - name = CURRENT->rq_disk->disk_name; + name = hd_req->rq_disk->disk_name; printk("%s: timeout\n", name); - if (++CURRENT->errors >= MAX_ERRORS) { + if (++hd_req->errors >= MAX_ERRORS) { #ifdef DEBUG printk("%s: too many errors\n", name); #endif - __blk_end_request_cur(CURRENT, -EIO); + hd_end_request_cur(-EIO); } hd_request(); spin_unlock_irq(hd_queue->queue_lock); @@ -551,7 +564,7 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req) } if (disk->head > 16) { printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); - __blk_end_request_cur(req, -EIO); + hd_end_request_cur(-EIO); } disk->special_op = 0; return 1; @@ -578,11 +591,15 @@ static void hd_request(void) repeat: del_timer(&device_timer); - req = CURRENT; - if (!req) { - do_hd = NULL; - return; + if (!hd_req) { + hd_req = elv_next_request(hd_queue); + if (!hd_req) { + do_hd = NULL; + return; + } + blkdev_dequeue_request(hd_req); } + req = hd_req; if (reset) { reset_hd(); @@ -595,7 +612,7 @@ repeat: ((block+nsect) > get_capacity(req->rq_disk))) { printk("%s: bad access: block=%d, count=%d\n", req->rq_disk->disk_name, block, nsect); - __blk_end_request_cur(req, -EIO); + hd_end_request_cur(-EIO); goto repeat; } @@ -635,7 +652,7 @@ repeat: break; default: printk("unknown hd-command\n"); - __blk_end_request_cur(req, -EIO); + hd_end_request_cur(-EIO); break; } } -- cgit v1.2.3-18-g5258 From a336ca6fe6e0c46b2eef0e520951acb4e6cb2976 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:03 +0900 Subject: ataflop: dequeue and track in-flight request ataflop has single request in flight. Till now, whenever it needs to access the in-flight request it called elv_next_request(). This patch makes ataflop track the in-flight request directly and dequeue it when processing starts. The added complexity is minimal and this will help future block layer changes. [ Impact: dequeue in-flight request, one elv_next_request() per request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/ataflop.c | 63 +++++++++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 234024cda5e..89a591d9c83 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -79,9 +79,7 @@ #undef DEBUG static struct request_queue *floppy_queue; - -#define QUEUE (floppy_queue) -#define CURRENT elv_next_request(floppy_queue) +static struct request *fd_request; /* Disk types: DD, HD, ED */ static struct atari_disk_type { @@ -376,6 +374,12 @@ static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0); static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0); static DEFINE_TIMER(fd_timer, check_change, 0, 0); +static void fd_end_request_cur(int err) +{ + if (!__blk_end_request_cur(fd_request, err)) + fd_request = NULL; +} + static inline void start_motor_off_timer(void) { mod_timer(&motor_off_timer, jiffies + FD_MOTOR_OFF_DELAY); @@ -606,15 +610,15 @@ static void fd_error( void ) return; } - if (!CURRENT) + if (!fd_request) return; - CURRENT->errors++; - if (CURRENT->errors >= MAX_ERRORS) { + fd_request->errors++; + if (fd_request->errors >= MAX_ERRORS) { printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive ); - __blk_end_request_cur(CURRENT, -EIO); + fd_end_request_cur(-EIO); } - else if (CURRENT->errors == RECALIBRATE_ERRORS) { + else if (fd_request->errors == RECALIBRATE_ERRORS) { printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive ); if (SelectedDrive != -1) SUD.track = -1; @@ -725,14 +729,14 @@ static void do_fd_action( int drive ) if (IS_BUFFERED( drive, ReqSide, ReqTrack )) { if (ReqCmd == READ) { copy_buffer( SECTOR_BUFFER(ReqSector), ReqData ); - if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) { + if (++ReqCnt < blk_rq_cur_sectors(fd_request)) { /* read next sector */ setup_req_params( drive ); goto repeat; } else { /* all sectors finished */ - __blk_end_request_cur(CURRENT, 0); + fd_end_request_cur(0); redo_fd_request(); return; } @@ -1130,14 +1134,14 @@ static void fd_rwsec_done1(int status) } } - if (++ReqCnt < blk_rq_cur_sectors(CURRENT)) { + if (++ReqCnt < blk_rq_cur_sectors(fd_request)) { /* read next sector */ setup_req_params( SelectedDrive ); do_fd_action( SelectedDrive ); } else { /* all sectors finished */ - __blk_end_request_cur(CURRENT, 0); + fd_end_request_cur(0); redo_fd_request(); } return; @@ -1378,7 +1382,7 @@ static void setup_req_params( int drive ) ReqData = ReqBuffer + 512 * ReqCnt; if (UseTrackbuffer) - read_track = (ReqCmd == READ && CURRENT->errors == 0); + read_track = (ReqCmd == READ && fd_request->errors == 0); else read_track = 0; @@ -1392,25 +1396,28 @@ static void redo_fd_request(void) int drive, type; struct atari_floppy_struct *floppy; - DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n", - CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "", - CURRENT ? blk_rq_pos(CURRENT) : 0 )); + DPRINT(("redo_fd_request: fd_request=%p dev=%s fd_request->sector=%ld\n", + fd_request, fd_request ? fd_request->rq_disk->disk_name : "", + fd_request ? blk_rq_pos(fd_request) : 0 )); IsFormatting = 0; repeat: + if (!fd_request) { + fd_request = elv_next_request(floppy_queue); + if (!fd_request) + goto the_end; + blkdev_dequeue_request(fd_request); + } - if (!CURRENT) - goto the_end; - - floppy = CURRENT->rq_disk->private_data; + floppy = fd_request->rq_disk->private_data; drive = floppy - unit; type = floppy->type; if (!UD.connected) { /* drive not connected */ printk(KERN_ERR "Unknown Device: fd%d\n", drive ); - __blk_end_request_cur(CURRENT, -EIO); + fd_end_request_cur(-EIO); goto repeat; } @@ -1426,12 +1433,12 @@ repeat: /* user supplied disk type */ if (--type >= NUM_DISK_MINORS) { printk(KERN_WARNING "fd%d: invalid disk format", drive ); - __blk_end_request_cur(CURRENT, -EIO); + fd_end_request_cur(-EIO); goto repeat; } if (minor2disktype[type].drive_types > DriveType) { printk(KERN_WARNING "fd%d: unsupported disk format", drive ); - __blk_end_request_cur(CURRENT, -EIO); + fd_end_request_cur(-EIO); goto repeat; } type = minor2disktype[type].index; @@ -1440,8 +1447,8 @@ repeat: UD.autoprobe = 0; } - if (blk_rq_pos(CURRENT) + 1 > UDT->blocks) { - __blk_end_request_cur(CURRENT, -EIO); + if (blk_rq_pos(fd_request) + 1 > UDT->blocks) { + fd_end_request_cur(-EIO); goto repeat; } @@ -1449,9 +1456,9 @@ repeat: del_timer( &motor_off_timer ); ReqCnt = 0; - ReqCmd = rq_data_dir(CURRENT); - ReqBlock = blk_rq_pos(CURRENT); - ReqBuffer = CURRENT->buffer; + ReqCmd = rq_data_dir(fd_request); + ReqBlock = blk_rq_pos(fd_request); + ReqBuffer = fd_request->buffer; setup_req_params( drive ); do_fd_action( drive ); -- cgit v1.2.3-18-g5258 From f4bd4b90bfa86e867111aa182895cb5ac203aa7a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:04 +0900 Subject: swim3: dequeue in-flight request swim3 has at most single request in flight and already tracks it using fd_req. Convert it to dequeuing model by updating request fetching and wrapping completion function. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/swim3.c | 47 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 34 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index c1b9a4dc11b..f48c6dd47e0 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -251,6 +251,20 @@ static int floppy_release(struct gendisk *disk, fmode_t mode); static int floppy_check_change(struct gendisk *disk); static int floppy_revalidate(struct gendisk *disk); +static bool swim3_end_request(int err, unsigned int nr_bytes) +{ + if (__blk_end_request(fd_req, err, nr_bytes)) + return true; + + fd_req = NULL; + return false; +} + +static bool swim3_end_request_cur(int err) +{ + return swim3_end_request(err, blk_rq_cur_bytes(fd_req)); +} + static void swim3_select(struct floppy_state *fs, int sel) { struct swim3 __iomem *sw = fs->swim3; @@ -310,7 +324,14 @@ static void start_request(struct floppy_state *fs) wake_up(&fs->wait); return; } - while (fs->state == idle && (req = elv_next_request(swim3_queue))) { + while (fs->state == idle) { + if (!fd_req) { + fd_req = elv_next_request(swim3_queue); + if (!fd_req) + break; + blkdev_dequeue_request(fd_req); + } + req = fd_req; #if 0 printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", req->rq_disk->disk_name, req->cmd, @@ -320,11 +341,11 @@ static void start_request(struct floppy_state *fs) #endif if (blk_rq_pos(req) >= fs->total_secs) { - __blk_end_request_cur(req, -EIO); + swim3_end_request_cur(-EIO); continue; } if (fs->ejected) { - __blk_end_request_cur(req, -EIO); + swim3_end_request_cur(-EIO); continue; } @@ -332,7 +353,7 @@ static void start_request(struct floppy_state *fs) if (fs->write_prot < 0) fs->write_prot = swim3_readbit(fs, WRITE_PROT); if (fs->write_prot) { - __blk_end_request_cur(req, -EIO); + swim3_end_request_cur(-EIO); continue; } } @@ -505,7 +526,7 @@ static void act(struct floppy_state *fs) case do_transfer: if (fs->cur_cyl != fs->req_cyl) { if (fs->retries > 5) { - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; return; } @@ -537,7 +558,7 @@ static void scan_timeout(unsigned long data) out_8(&sw->intr_enable, 0); fs->cur_cyl = -1; if (fs->retries > 5) { - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); } else { @@ -556,7 +577,7 @@ static void seek_timeout(unsigned long data) out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); printk(KERN_ERR "swim3: seek timeout\n"); - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); } @@ -580,7 +601,7 @@ static void settle_timeout(unsigned long data) return; } printk(KERN_ERR "swim3: seek settle timeout\n"); - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); } @@ -603,7 +624,7 @@ static void xfer_timeout(unsigned long data) printk(KERN_ERR "swim3: timeout %sing sector %ld\n", (rq_data_dir(fd_req)==WRITE? "writ": "read"), (long)blk_rq_pos(fd_req)); - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); } @@ -634,7 +655,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk(KERN_ERR "swim3: seen sector but cyl=ff?\n"); fs->cur_cyl = -1; if (fs->retries > 5) { - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); } else { @@ -717,7 +738,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk("swim3: error %sing block %ld (err=%x)\n", rq_data_dir(fd_req) == WRITE? "writ": "read", (long)blk_rq_pos(fd_req), err); - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; } } else { @@ -726,12 +747,12 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid); printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n", fs->state, rq_data_dir(fd_req), intr, err); - __blk_end_request_cur(fd_req, -EIO); + swim3_end_request_cur(-EIO); fs->state = idle; start_request(fs); break; } - if (__blk_end_request(fd_req, 0, fs->scount << 9)) { + if (swim3_end_request(0, fs->scount << 9)) { fs->req_sector += fs->scount; if (fs->req_sector > fs->secpertrack) { fs->req_sector -= fs->secpertrack; -- cgit v1.2.3-18-g5258 From 2d75ce084eec2a8154225c7e978191b364029003 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:05 +0900 Subject: xsysace: dequeue in-flight request xsysace already tracks in-flight request using ace->req. Converting to dequeueing model is mostly a matter of adding dequeueing call after request fetching. The only tricky part is handling CF removal which should complete both in flight and on queue requests. Convert to dequeueing model. While at it, remove explicit blk_rq_cur_bytes() and use __blk_end_request_cur() instead. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Grant Likely Signed-off-by: Jens Axboe --- drivers/block/xsysace.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 97c99b43f88..edf137b6c37 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -466,7 +466,8 @@ struct request *ace_get_next_request(struct request_queue * q) while ((req = elv_next_request(q)) != NULL) { if (blk_fs_request(req)) break; - __blk_end_request_cur(req, -EIO); + blkdev_dequeue_request(req); + __blk_end_request_all(req, -EIO); } return req; } @@ -492,9 +493,15 @@ static void ace_fsm_dostate(struct ace_device *ace) set_capacity(ace->gd, 0); dev_info(ace->dev, "No CF in slot\n"); - /* Drop all pending requests */ - while ((req = elv_next_request(ace->queue)) != NULL) - __blk_end_request_cur(req, -EIO); + /* Drop all in-flight and pending requests */ + if (ace->req) { + __blk_end_request_all(ace->req, -EIO); + ace->req = NULL; + } + while ((req = elv_next_request(ace->queue)) != NULL) { + blkdev_dequeue_request(req); + __blk_end_request_all(req, -EIO); + } /* Drop back to IDLE state and notify waiters */ ace->fsm_state = ACE_FSM_STATE_IDLE; @@ -642,6 +649,7 @@ static void ace_fsm_dostate(struct ace_device *ace) ace->fsm_state = ACE_FSM_STATE_IDLE; break; } + blkdev_dequeue_request(req); /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, @@ -718,8 +726,7 @@ static void ace_fsm_dostate(struct ace_device *ace) } /* bio finished; is there another one? */ - if (__blk_end_request(ace->req, 0, - blk_rq_cur_bytes(ace->req))) { + if (__blk_end_request_cur(ace->req, 0)) { /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", * blk_rq_sectors(ace->req), * blk_rq_cur_sectors(ace->req)); -- cgit v1.2.3-18-g5258 From b12d4f82c1a3cdcb2441c803a3368a9426f2f47f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:06 +0900 Subject: paride: dequeue in-flight request pd/pf/pcd have track in-flight request by pd/pf/pcd_req. They can be converted to dequeueing model by updating fetching and completion paths. Convert them. Note that removal of elv_next_request() call from pf_next_buf() doesn't make any functional difference. The path is traveled only during partial completion of a request and elv_next_request() call must return the same request anyway. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Tim Waugh Signed-off-by: Jens Axboe --- drivers/block/paride/pcd.c | 18 ++++++++++++------ drivers/block/paride/pd.c | 14 +++++++++----- drivers/block/paride/pf.c | 14 +++++++------- 3 files changed, 28 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index 2d5dc0af55e..425f81586a3 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -719,9 +719,12 @@ static void do_pcd_request(struct request_queue * q) if (pcd_busy) return; while (1) { - pcd_req = elv_next_request(q); - if (!pcd_req) - return; + if (!pcd_req) { + pcd_req = elv_next_request(q); + if (!pcd_req) + return; + blkdev_dequeue_request(pcd_req); + } if (rq_data_dir(pcd_req) == READ) { struct pcd_unit *cd = pcd_req->rq_disk->private_data; @@ -734,8 +737,10 @@ static void do_pcd_request(struct request_queue * q) pcd_busy = 1; ps_set_intr(do_pcd_read, NULL, 0, nice); return; - } else - __blk_end_request_cur(pcd_req, -EIO); + } else { + __blk_end_request_all(pcd_req, -EIO); + pcd_req = NULL; + } } } @@ -744,7 +749,8 @@ static inline void next_request(int err) unsigned long saved_flags; spin_lock_irqsave(&pcd_lock, saved_flags); - __blk_end_request_cur(pcd_req, err); + if (!__blk_end_request_cur(pcd_req, err)) + pcd_req = NULL; pcd_busy = 0; do_pcd_request(pcd_queue); spin_unlock_irqrestore(&pcd_lock, saved_flags); diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 9ec5d4ac0b6..d2ca3f55206 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -410,11 +410,14 @@ static void run_fsm(void) pd_claimed = 0; phase = NULL; spin_lock_irqsave(&pd_lock, saved_flags); - __blk_end_request_cur(pd_req, - res == Ok ? 0 : -EIO); - pd_req = elv_next_request(pd_queue); - if (!pd_req) - stop = 1; + if (!__blk_end_request_cur(pd_req, + res == Ok ? 0 : -EIO)) { + pd_req = elv_next_request(pd_queue); + if (!pd_req) + stop = 1; + else + blkdev_dequeue_request(pd_req); + } spin_unlock_irqrestore(&pd_lock, saved_flags); if (stop) return; @@ -706,6 +709,7 @@ static void do_pd_request(struct request_queue * q) pd_req = elv_next_request(q); if (!pd_req) return; + blkdev_dequeue_request(pd_req); schedule_fsm(); } diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index e88c889aa7f..d6f7bd84ed3 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -752,10 +752,8 @@ static struct request_queue *pf_queue; static void pf_end_request(int err) { - if (pf_req) { - __blk_end_request_cur(pf_req, err); + if (pf_req && !__blk_end_request_cur(pf_req, err)) pf_req = NULL; - } } static void do_pf_request(struct request_queue * q) @@ -763,9 +761,12 @@ static void do_pf_request(struct request_queue * q) if (pf_busy) return; repeat: - pf_req = elv_next_request(q); - if (!pf_req) - return; + if (!pf_req) { + pf_req = elv_next_request(q); + if (!pf_req) + return; + blkdev_dequeue_request(pf_req); + } pf_current = pf_req->rq_disk->private_data; pf_block = blk_rq_pos(pf_req); @@ -806,7 +807,6 @@ static int pf_next_buf(void) if (!pf_count) { spin_lock_irqsave(&pf_spin_lock, saved_flags); pf_end_request(0); - pf_req = elv_next_request(pf_queue); spin_unlock_irqrestore(&pf_spin_lock, saved_flags); if (!pf_req) return 1; -- cgit v1.2.3-18-g5258 From 10e1e629b386aef97bf66de6ef28d450bec06ee3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:07 +0900 Subject: ps3disk: dequeue in-flight request Other than in issue error paths, ps3disk always completely finishes fetched requests. With full completion on error paths, it can be easily converted to dequeueing model. * After L1 r/w call failure, ps3disk_submit_request_sg() now fails the whole request. Issue failure isn't likely to benefit from partial retry anyway and ps3disk uses full failure in completion error path too, so I don't think this amounts to any meaningful functionality loss. * flush completion is converted to _all for consistency. It doesn't make any functional difference. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Geert Uytterhoeven Signed-off-by: Jens Axboe --- drivers/block/ps3disk.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index 8d583081b50..f4d8db944e7 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -157,7 +157,7 @@ static int ps3disk_submit_request_sg(struct ps3_storage_device *dev, if (res) { dev_err(&dev->sbd.core, "%s:%u: %s failed %d\n", __func__, __LINE__, op, res); - __blk_end_request_cur(req, -EIO); + __blk_end_request_all(req, -EIO); return 0; } @@ -179,7 +179,7 @@ static int ps3disk_submit_flush_request(struct ps3_storage_device *dev, if (res) { dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n", __func__, __LINE__, res); - __blk_end_request_cur(req, -EIO); + __blk_end_request_all(req, -EIO); return 0; } @@ -195,6 +195,8 @@ static void ps3disk_do_request(struct ps3_storage_device *dev, dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__); while ((req = elv_next_request(q))) { + blkdev_dequeue_request(req); + if (blk_fs_request(req)) { if (ps3disk_submit_request_sg(dev, req)) break; @@ -204,7 +206,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev, break; } else { blk_dump_rq_flags(req, DEVICE_NAME " bad request"); - __blk_end_request_cur(req, -EIO); + __blk_end_request_all(req, -EIO); continue; } } -- cgit v1.2.3-18-g5258 From 9e31bebee2d8b5f8abe9677f2a29b90cba848657 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:08 +0900 Subject: amiflop: dequeue in-flight request Request processing in amiflop is done sequentially in redo_fd_request() proper and redo_fd_request() can easily be converted to track in-flight request. Remove CURRENT, track in-flight request directly and dequeue it when processing starts. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/amiflop.c | 48 ++++++++++++++++++++++++------------------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index e4a14b94828..80a68b2e045 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -112,8 +112,6 @@ module_param(fd_def_df0, ulong, 0); MODULE_LICENSE("GPL"); static struct request_queue *floppy_queue; -#define QUEUE (floppy_queue) -#define CURRENT elv_next_request(floppy_queue) /* * Macros @@ -1335,59 +1333,61 @@ static int get_track(int drive, int track) static void redo_fd_request(void) { + struct request *rq; unsigned int cnt, block, track, sector; int drive; struct amiga_floppy_struct *floppy; char *data; unsigned long flags; + int err; - repeat: - if (!CURRENT) { +next_req: + rq = elv_next_request(floppy_queue); + if (!rq) { /* Nothing left to do */ return; } + blkdev_dequeue_request(rq); - floppy = CURRENT->rq_disk->private_data; + floppy = rq->rq_disk->private_data; drive = floppy - unit; +next_segment: /* Here someone could investigate to be more efficient */ - for (cnt = 0; cnt < blk_rq_cur_sectors(CURRENT); cnt++) { + for (cnt = 0, err = 0; cnt < blk_rq_cur_sectors(rq); cnt++) { #ifdef DEBUG printk("fd: sector %ld + %d requested for %s\n", - blk_rq_pos(CURRENT), cnt, - (rq_data_dir(CURRENT) == READ) ? "read" : "write"); + blk_rq_pos(rq), cnt, + (rq_data_dir(rq) == READ) ? "read" : "write"); #endif - block = blk_rq_pos(CURRENT) + cnt; + block = blk_rq_pos(rq) + cnt; if ((int)block > floppy->blocks) { - __blk_end_request_cur(CURRENT, -EIO); - goto repeat; + err = -EIO; + break; } track = block / (floppy->dtype->sects * floppy->type->sect_mult); sector = block % (floppy->dtype->sects * floppy->type->sect_mult); - data = CURRENT->buffer + 512 * cnt; + data = rq->buffer + 512 * cnt; #ifdef DEBUG printk("access to track %d, sector %d, with buffer at " "0x%08lx\n", track, sector, data); #endif if (get_track(drive, track) == -1) { - __blk_end_request_cur(CURRENT, -EIO); - goto repeat; + err = -EIO; + break; } - switch (rq_data_dir(CURRENT)) { - case READ: + if (rq_data_dir(rq) == READ) { memcpy(data, floppy->trackbuf + sector * 512, 512); - break; - - case WRITE: + } else { memcpy(floppy->trackbuf + sector * 512, data, 512); /* keep the drive spinning while writes are scheduled */ if (!fd_motor_on(drive)) { - __blk_end_request_cur(CURRENT, -EIO); - goto repeat; + err = -EIO; + break; } /* * setup a callback to write the track buffer @@ -1399,12 +1399,12 @@ static void redo_fd_request(void) /* reset the timer */ mod_timer (flush_track_timer + drive, jiffies + 1); local_irq_restore(flags); - break; } } - __blk_end_request_cur(CURRENT, 0); - goto repeat; + if (__blk_end_request_cur(rq, err)) + goto next_segment; + goto next_req; } static void do_fd_request(struct request_queue * q) -- cgit v1.2.3-18-g5258 From 06b0608e2b46465e8e663214e7db982ddb000346 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:09 +0900 Subject: swim: dequeue in-flight request swim processes requests one-by-one synchronously and can easily be converted to dequeuing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/swim.c | 47 +++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/block/swim.c b/drivers/block/swim.c index fc6a1c32293..dedd4893f5e 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -514,7 +514,7 @@ static int floppy_read_sectors(struct floppy_state *fs, ret = swim_read_sector(fs, side, track, sector, buffer); if (try-- == 0) - return -1; + return -EIO; } while (ret != 512); buffer += ret; @@ -528,38 +528,37 @@ static void redo_fd_request(struct request_queue *q) struct request *req; struct floppy_state *fs; - while ((req = elv_next_request(q))) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + + while (req) { + int err = -EIO; fs = req->rq_disk->private_data; - if (blk_rq_pos(req) >= fs->total_secs) { - __blk_end_request_cur(req, -EIO); - continue; - } - if (!fs->disk_in) { - __blk_end_request_cur(req, -EIO); - continue; - } - if (rq_data_dir(req) == WRITE) { - if (fs->write_protected) { - __blk_end_request_cur(req, -EIO); - continue; - } - } + if (blk_rq_pos(req) >= fs->total_secs) + goto done; + if (!fs->disk_in) + goto done; + if (rq_data_dir(req) == WRITE && fs->write_protected) + goto done; + switch (rq_data_dir(req)) { case WRITE: /* NOT IMPLEMENTED */ - __blk_end_request_cur(req, -EIO); break; case READ: - if (floppy_read_sectors(fs, blk_rq_pos(req), - blk_rq_cur_sectors(req), - req->buffer)) { - __blk_end_request_cur(req, -EIO); - continue; - } - __blk_end_request_cur(req, 0); + err = floppy_read_sectors(fs, blk_rq_pos(req), + blk_rq_cur_sectors(req), + req->buffer); break; } + done: + if (!__blk_end_request_cur(req, err)) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + } } } -- cgit v1.2.3-18-g5258 From bab2a807a489822ded0c9d4a5344c80bcac10b0a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:10 +0900 Subject: xd: dequeue in-flight request xd processes requests one-by-one synchronously and can be easily converted to dequeueing model. Convert it. While at it, use rq_cur_bytes instead of rq_bytes when checking for sector overflow. This is for for consistency and better behavior for merged requests. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/xd.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 4ef88018bcd..d4c4352354b 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -305,26 +305,31 @@ static void do_xd_request (struct request_queue * q) if (xdc_busy) return; - while ((req = elv_next_request(q)) != NULL) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + + while (req) { unsigned block = blk_rq_pos(req); - unsigned count = blk_rq_sectors(req); + unsigned count = blk_rq_cur_sectors(req); XD_INFO *disk = req->rq_disk->private_data; - int res = 0; + int res = -EIO; int retry; - if (!blk_fs_request(req)) { - __blk_end_request_cur(req, -EIO); - continue; - } - if (block + count > get_capacity(req->rq_disk)) { - __blk_end_request_cur(req, -EIO); - continue; - } + if (!blk_fs_request(req)) + goto done; + if (block + count > get_capacity(req->rq_disk)) + goto done; for (retry = 0; (retry < XD_RETRIES) && !res; retry++) res = xd_readwrite(rq_data_dir(req), disk, req->buffer, block, count); + done: /* wrap up, 0 = success, -errno = fail */ - __blk_end_request_cur(req, res); + if (!__blk_end_request_cur(req, res)) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + } } } -- cgit v1.2.3-18-g5258 From 1498ada7a8e80afe324f2b8d86158925d0096ec9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:11 +0900 Subject: mtd_blkdevs: dequeue in-flight request mtd_blkdevs processes requests one-by-one synchronously from a kthread and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: David Woodhouse Signed-off-by: Jens Axboe --- drivers/mtd/mtd_blkdevs.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 50c76a2ca76..3e10442615d 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -89,18 +89,22 @@ static int mtd_blktrans_thread(void *arg) { struct mtd_blktrans_ops *tr = arg; struct request_queue *rq = tr->blkcore_priv->rq; + struct request *req = NULL; /* we might get involved when memory gets low, so use PF_MEMALLOC */ current->flags |= PF_MEMALLOC; spin_lock_irq(rq->queue_lock); + while (!kthread_should_stop()) { - struct request *req; struct mtd_blktrans_dev *dev; int res; - req = elv_next_request(rq); - + if (!req) { + req = elv_next_request(rq); + if (req) + blkdev_dequeue_request(req); + } if (!req) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_irq(rq->queue_lock); @@ -120,8 +124,13 @@ static int mtd_blktrans_thread(void *arg) spin_lock_irq(rq->queue_lock); - __blk_end_request_cur(req, res); + if (!__blk_end_request_cur(req, res)) + req = NULL; } + + if (req) + __blk_end_request_all(req, -EIO); + spin_unlock_irq(rq->queue_lock); return 0; -- cgit v1.2.3-18-g5258 From 6b0bf407b586b6ba8e060ad9979cb2bc3370b7eb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:12 +0900 Subject: jsflash: dequeue in-flight request jsflash processes requests one-by-one synchronously from a kthread and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Pete Zaitcev Signed-off-by: Jens Axboe --- drivers/sbus/char/jsflash.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index d56ddaa7703..f572a4a1d14 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -186,31 +186,37 @@ static void jsfd_do_request(struct request_queue *q) { struct request *req; - while ((req = elv_next_request(q)) != NULL) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + + while (req) { struct jsfd_part *jdp = req->rq_disk->private_data; unsigned long offset = blk_rq_pos(req) << 9; size_t len = blk_rq_cur_bytes(req); + int err = -EIO; - if ((offset + len) > jdp->dsize) { - __blk_end_request_cur(req, -EIO); - continue; - } + if ((offset + len) > jdp->dsize) + goto end; if (rq_data_dir(req) != READ) { printk(KERN_ERR "jsfd: write\n"); - __blk_end_request_cur(req, -EIO); - continue; + goto end; } if ((jdp->dbase & 0xff000000) != 0x20000000) { printk(KERN_ERR "jsfd: bad base %x\n", (int)jdp->dbase); - __blk_end_request_cur(req, -EIO); - continue; + goto end; } jsfd_read(req->buffer, jdp->dbase + offset, len); - - __blk_end_request_cur(req, 0); + err = 0; + end: + if (!__blk_end_request_cur(req, err)) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + } } } -- cgit v1.2.3-18-g5258 From fb3ac7f6b811eac8e0aafa3df1c16ed872e898a8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:13 +0900 Subject: z2ram: dequeue in-flight request z2ram processes requests one-by-one synchronously and can be easily converted to dequeueing model. Convert it. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/z2ram.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index 6a1383834ec..c909c1a3f65 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -70,15 +70,21 @@ static struct gendisk *z2ram_gendisk; static void do_z2_request(struct request_queue *q) { struct request *req; - while ((req = elv_next_request(q)) != NULL) { + + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + + while (req) { unsigned long start = blk_rq_pos(req) << 9; unsigned long len = blk_rq_cur_bytes(req); + int err = 0; if (start + len > z2ram_size) { printk( KERN_ERR DEVICE_NAME ": bad access: block=%lu, count=%u\n", blk_rq_pos(req), blk_rq_cur_sectors(req)); - __blk_end_request_cur(req, -EIO); - continue; + err = -EIO; + goto done; } while (len) { unsigned long addr = start & Z2RAM_CHUNKMASK; @@ -93,7 +99,12 @@ static void do_z2_request(struct request_queue *q) start += size; len -= size; } - __blk_end_request_cur(req, 0); + done: + if (!__blk_end_request_cur(req, err)) { + req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + } } } -- cgit v1.2.3-18-g5258 From 296b2f6ae654581adc27f0d6f0af454c7f3d06ee Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:15 +0900 Subject: block: convert to dequeueing model (easy ones) plat-omap/mailbox, floppy, viocd, mspro_block, i2o_block and mmc/card/queue are already pretty close to dequeueing model and can be converted with simple changes. Convert them. While at it, * xen-blkfront: !fs check moved downwards to share dequeue call with normal path. * mspro_block: __blk_end_request(..., blk_rq_cur_byte()) converted to __blk_end_request_cur() * mmc/card/queue: loop of __blk_end_request() converted to __blk_end_request_all() [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: Jeremy Fitzhardinge Cc: Stephen Rothwell Cc: Alex Dubov Cc: Markus Lidel Cc: Pierre Ossman Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 4 +++- drivers/block/xen-blkfront.c | 13 +++++++------ drivers/cdrom/viocd.c | 2 ++ drivers/memstick/core/mspro_block.c | 8 +++++--- drivers/message/i2o/i2o_block.c | 6 ++++-- drivers/mmc/card/queue.c | 12 ++++++------ 6 files changed, 27 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 1e27ed9208b..e2c70d2085a 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -931,7 +931,7 @@ static inline void unlock_fdc(void) del_timer(&fd_timeout); cont = NULL; clear_bit(0, &fdc_busy); - if (elv_next_request(floppy_queue)) + if (current_req || elv_next_request(floppy_queue)) do_fd_request(floppy_queue); spin_unlock_irqrestore(&floppy_lock, flags); wake_up(&fdc_wait); @@ -2913,6 +2913,8 @@ static void redo_fd_request(void) spin_lock_irq(floppy_queue->queue_lock); req = elv_next_request(floppy_queue); + if (req) + blkdev_dequeue_request(req); spin_unlock_irq(floppy_queue->queue_lock); if (!req) { do_floppy = NULL; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 91fc56597e9..66f834571b8 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -301,22 +301,23 @@ static void do_blkif_request(struct request_queue *rq) while ((req = elv_next_request(rq)) != NULL) { info = req->rq_disk->private_data; - if (!blk_fs_request(req)) { - __blk_end_request_cur(req, -EIO); - continue; - } if (RING_FULL(&info->ring)) goto wait; + blkdev_dequeue_request(req); + + if (!blk_fs_request(req)) { + __blk_end_request_all(req, -EIO); + continue; + } + pr_debug("do_blk_req %p: cmd %p, sec %lx, " "(%u/%u) buffer:%p [%s]\n", req, req->cmd, (unsigned long)blk_rq_pos(req), blk_rq_cur_sectors(req), blk_rq_sectors(req), req->buffer, rq_data_dir(req) ? "write" : "read"); - - blkdev_dequeue_request(req); if (blkif_queue_request(req)) { blk_requeue_request(rq, req); wait: diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 6e190a93d8d..bbe9f086734 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -298,6 +298,8 @@ static void do_viocd_request(struct request_queue *q) struct request *req; while ((rwreq == 0) && ((req = elv_next_request(q)) != NULL)) { + blkdev_dequeue_request(req); + if (!blk_fs_request(req)) __blk_end_request_all(req, -EIO); else if (send_request(req) < 0) { diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 93b2c618565..58f5be8cd69 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -672,8 +672,7 @@ try_again: msb->req_sg); if (!msb->seg_count) { - chunk = __blk_end_request(msb->block_req, -ENOMEM, - blk_rq_cur_bytes(msb->block_req)); + chunk = __blk_end_request_cur(msb->block_req, -ENOMEM); continue; } @@ -711,6 +710,7 @@ try_again: dev_dbg(&card->dev, "issue end\n"); return -EAGAIN; } + blkdev_dequeue_request(msb->block_req); dev_dbg(&card->dev, "trying again\n"); chunk = 1; @@ -825,8 +825,10 @@ static void mspro_block_submit_req(struct request_queue *q) return; if (msb->eject) { - while ((req = elv_next_request(q)) != NULL) + while ((req = elv_next_request(q)) != NULL) { + blkdev_dequeue_request(req); __blk_end_request_all(req, -ENODEV); + } return; } diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index e153f5d5237..8b5cbfc3ba9 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -916,8 +916,10 @@ static void i2o_block_request_fn(struct request_queue *q) blk_stop_queue(q); break; } - } else - __blk_end_request_cur(req, -EIO); + } else { + blkdev_dequeue_request(req); + __blk_end_request_all(req, -EIO); + } } }; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 7a72e75d5c6..4b70f1e2834 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -54,8 +54,11 @@ static int mmc_queue_thread(void *d) spin_lock_irq(q->queue_lock); set_current_state(TASK_INTERRUPTIBLE); - if (!blk_queue_plugged(q)) + if (!blk_queue_plugged(q)) { req = elv_next_request(q); + if (req) + blkdev_dequeue_request(req); + } mq->req = req; spin_unlock_irq(q->queue_lock); @@ -88,15 +91,12 @@ static void mmc_request(struct request_queue *q) { struct mmc_queue *mq = q->queuedata; struct request *req; - int ret; if (!mq) { printk(KERN_ERR "MMC: killing requests for dead queue\n"); while ((req = elv_next_request(q)) != NULL) { - do { - ret = __blk_end_request(req, -EIO, - blk_rq_cur_bytes(req)); - } while (ret); + blkdev_dequeue_request(req); + __blk_end_request_all(req, -EIO); } return; } -- cgit v1.2.3-18-g5258 From 2343046826a8ca426b07601d9593ee046c298b68 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:14 +0900 Subject: gdrom: dequeue in-flight request gdrom already dequeues and fully completes requests on normal path and the error paths can be easily converted to do so too. Clean it up and dequeue requests on error paths too. While at it remove superflous blk_fs_request() && !blk_rq_sectors() condition check. [ Impact: dequeue in-flight request, cleanup ] Signed-off-by: Tejun Heo Cc: Adrian McMenamin Signed-off-by: Jens Axboe --- drivers/cdrom/gdrom.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 488423cab51..3cc02bfe828 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -638,33 +638,31 @@ static void gdrom_readdisk_dma(struct work_struct *work) kfree(read_command); } -static void gdrom_request_handler_dma(struct request *req) -{ - /* dequeue, add to list of deferred work - * and then schedule workqueue */ - blkdev_dequeue_request(req); - list_add_tail(&req->queuelist, &gdrom_deferred); - schedule_work(&work); -} - static void gdrom_request(struct request_queue *rq) { struct request *req; while ((req = elv_next_request(rq)) != NULL) { + blkdev_dequeue_request(req); + if (!blk_fs_request(req)) { printk(KERN_DEBUG "GDROM: Non-fs request ignored\n"); - __blk_end_request_cur(req, -EIO); + __blk_end_request_all(req, -EIO); + continue; } if (rq_data_dir(req) != READ) { printk(KERN_NOTICE "GDROM: Read only device -"); printk(" write request ignored\n"); - __blk_end_request_cur(req, -EIO); + __blk_end_request_all(req, -EIO); + continue; } - if (blk_rq_sectors(req)) - gdrom_request_handler_dma(req); - else - __blk_end_request_cur(req, -EIO); + + /* + * Add to list of deferred work and then schedule + * workqueue. + */ + list_add_tail(&req->queuelist, &gdrom_deferred); + schedule_work(&work); } } -- cgit v1.2.3-18-g5258 From 9934c8c04561413609d2bc38c6b9f268cba774a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:16 +0900 Subject: block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: James Bottomley Cc: Mike Miller Cc: unsik Kim Cc: Paul Clements Cc: Tim Waugh Cc: Geert Uytterhoeven Cc: David S. Miller Cc: Laurent Vivier Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Grant Likely Cc: Adrian McMenamin Cc: Stephen Rothwell Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Alex Dubov Cc: Pierre Ossman Cc: David Woodhouse Cc: Markus Lidel Cc: Stefan Weinhuber Cc: Martin Schwidefsky Cc: Pete Zaitcev Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/block/DAC960.c | 4 ++-- drivers/block/amiflop.c | 3 +-- drivers/block/ataflop.c | 3 +-- drivers/block/cciss.c | 4 ++-- drivers/block/cpqarray.c | 4 ++-- drivers/block/floppy.c | 6 ++---- drivers/block/hd.c | 3 +-- drivers/block/mg_disk.c | 12 ++++-------- drivers/block/nbd.c | 4 +--- drivers/block/paride/pcd.c | 3 +-- drivers/block/paride/pd.c | 7 ++----- drivers/block/paride/pf.c | 3 +-- drivers/block/ps3disk.c | 4 +--- drivers/block/sunvdc.c | 3 +-- drivers/block/swim.c | 12 +++--------- drivers/block/swim3.c | 3 +-- drivers/block/sx8.c | 8 +++----- drivers/block/ub.c | 8 ++++---- drivers/block/viodasd.c | 4 +--- drivers/block/virtio_blk.c | 4 ++-- drivers/block/xd.c | 12 +++--------- drivers/block/xen-blkfront.c | 4 ++-- drivers/block/xsysace.c | 10 ++++------ drivers/block/z2ram.c | 12 +++--------- drivers/cdrom/gdrom.c | 4 +--- drivers/cdrom/viocd.c | 4 +--- drivers/ide/ide-atapi.c | 2 +- drivers/ide/ide-io.c | 9 +++------ drivers/memstick/core/mspro_block.c | 9 +++------ drivers/message/i2o/i2o_block.c | 6 +++--- drivers/mmc/card/queue.c | 11 +++-------- drivers/mtd/mtd_blkdevs.c | 7 +------ drivers/s390/block/dasd.c | 16 +++++----------- drivers/s390/char/tape_block.c | 7 ++----- drivers/sbus/char/jsflash.c | 12 +++--------- drivers/scsi/scsi_lib.c | 10 +++++----- drivers/scsi/scsi_transport_sas.c | 4 +--- 37 files changed, 80 insertions(+), 161 deletions(-) (limited to 'drivers') diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 774ab05973a..668dc234b8e 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -3321,7 +3321,7 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_ DAC960_Command_T *Command; while(1) { - Request = elv_next_request(req_q); + Request = blk_peek_request(req_q); if (!Request) return 1; @@ -3341,7 +3341,7 @@ static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_ Command->BlockNumber = blk_rq_pos(Request); Command->BlockCount = blk_rq_sectors(Request); Command->Request = Request; - blkdev_dequeue_request(Request); + blk_start_request(Request); Command->SegmentCount = blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist); /* pci_map_sg MAY change the value of SegCount */ diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 80a68b2e045..9c6e5b0fe89 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1342,12 +1342,11 @@ static void redo_fd_request(void) int err; next_req: - rq = elv_next_request(floppy_queue); + rq = blk_fetch_request(floppy_queue); if (!rq) { /* Nothing left to do */ return; } - blkdev_dequeue_request(rq); floppy = rq->rq_disk->private_data; drive = floppy - unit; diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 89a591d9c83..f5e7180d7f4 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1404,10 +1404,9 @@ static void redo_fd_request(void) repeat: if (!fd_request) { - fd_request = elv_next_request(floppy_queue); + fd_request = blk_fetch_request(floppy_queue); if (!fd_request) goto the_end; - blkdev_dequeue_request(fd_request); } floppy = fd_request->rq_disk->private_data; diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index ab7b04c0db7..e714e7cce6f 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2801,7 +2801,7 @@ static void do_cciss_request(struct request_queue *q) goto startio; queue: - creq = elv_next_request(q); + creq = blk_peek_request(q); if (!creq) goto startio; @@ -2810,7 +2810,7 @@ static void do_cciss_request(struct request_queue *q) if ((c = cmd_alloc(h, 1)) == NULL) goto full; - blkdev_dequeue_request(creq); + blk_start_request(creq); spin_unlock_irq(q->queue_lock); diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index a5caeff4718..a02dcfc00f1 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -903,7 +903,7 @@ static void do_ida_request(struct request_queue *q) goto startio; queue_next: - creq = elv_next_request(q); + creq = blk_peek_request(q); if (!creq) goto startio; @@ -912,7 +912,7 @@ queue_next: if ((c = cmd_alloc(h,1)) == NULL) goto startio; - blkdev_dequeue_request(creq); + blk_start_request(creq); c->ctlr = h->ctlr; c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index e2c70d2085a..90877fee0ee 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -931,7 +931,7 @@ static inline void unlock_fdc(void) del_timer(&fd_timeout); cont = NULL; clear_bit(0, &fdc_busy); - if (current_req || elv_next_request(floppy_queue)) + if (current_req || blk_peek_request(floppy_queue)) do_fd_request(floppy_queue); spin_unlock_irqrestore(&floppy_lock, flags); wake_up(&fdc_wait); @@ -2912,9 +2912,7 @@ static void redo_fd_request(void) struct request *req; spin_lock_irq(floppy_queue->queue_lock); - req = elv_next_request(floppy_queue); - if (req) - blkdev_dequeue_request(req); + req = blk_fetch_request(floppy_queue); spin_unlock_irq(floppy_queue->queue_lock); if (!req) { do_floppy = NULL; diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 288ab63c102..961de56d00a 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -592,12 +592,11 @@ repeat: del_timer(&device_timer); if (!hd_req) { - hd_req = elv_next_request(hd_queue); + hd_req = blk_fetch_request(hd_queue); if (!hd_req) { do_hd = NULL; return; } - blkdev_dequeue_request(hd_req); } req = hd_req; diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 1ca5d1423fa..c0cd0a03f69 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -671,10 +671,8 @@ static void mg_request_poll(struct request_queue *q) while (1) { if (!host->req) { - host->req = elv_next_request(q); - if (host->req) - blkdev_dequeue_request(host->req); - else + host->req = blk_fetch_request(q); + if (!host->req) break; } @@ -744,10 +742,8 @@ static void mg_request(struct request_queue *q) while (1) { if (!host->req) { - host->req = elv_next_request(q); - if (host->req) - blkdev_dequeue_request(host->req); - else + host->req = blk_fetch_request(q); + if (!host->req) break; } req = host->req; diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index fad167de23b..5d23ffad7c7 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -533,11 +533,9 @@ static void do_nbd_request(struct request_queue *q) { struct request *req; - while ((req = elv_next_request(q)) != NULL) { + while ((req = blk_fetch_request(q)) != NULL) { struct nbd_device *lo; - blkdev_dequeue_request(req); - spin_unlock_irq(q->queue_lock); dprintk(DBG_BLKDEV, "%s: request %p: dequeued (flags=%x)\n", diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c index 425f81586a3..911dfd98d81 100644 --- a/drivers/block/paride/pcd.c +++ b/drivers/block/paride/pcd.c @@ -720,10 +720,9 @@ static void do_pcd_request(struct request_queue * q) return; while (1) { if (!pcd_req) { - pcd_req = elv_next_request(q); + pcd_req = blk_fetch_request(q); if (!pcd_req) return; - blkdev_dequeue_request(pcd_req); } if (rq_data_dir(pcd_req) == READ) { diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index d2ca3f55206..bf5955b3d87 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -412,11 +412,9 @@ static void run_fsm(void) spin_lock_irqsave(&pd_lock, saved_flags); if (!__blk_end_request_cur(pd_req, res == Ok ? 0 : -EIO)) { - pd_req = elv_next_request(pd_queue); + pd_req = blk_fetch_request(pd_queue); if (!pd_req) stop = 1; - else - blkdev_dequeue_request(pd_req); } spin_unlock_irqrestore(&pd_lock, saved_flags); if (stop) @@ -706,10 +704,9 @@ static void do_pd_request(struct request_queue * q) { if (pd_req) return; - pd_req = elv_next_request(q); + pd_req = blk_fetch_request(q); if (!pd_req) return; - blkdev_dequeue_request(pd_req); schedule_fsm(); } diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index d6f7bd84ed3..68a90834e99 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -762,10 +762,9 @@ static void do_pf_request(struct request_queue * q) return; repeat: if (!pf_req) { - pf_req = elv_next_request(q); + pf_req = blk_fetch_request(q); if (!pf_req) return; - blkdev_dequeue_request(pf_req); } pf_current = pf_req->rq_disk->private_data; diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index f4d8db944e7..338cee4cc0b 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -194,9 +194,7 @@ static void ps3disk_do_request(struct ps3_storage_device *dev, dev_dbg(&dev->sbd.core, "%s:%u\n", __func__, __LINE__); - while ((req = elv_next_request(q))) { - blkdev_dequeue_request(req); - + while ((req = blk_fetch_request(q))) { if (blk_fs_request(req)) { if (ps3disk_submit_request_sg(dev, req)) break; diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index 9f351bfa15e..cbfd9c0aef0 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -441,12 +441,11 @@ out: static void do_vdc_request(struct request_queue *q) { while (1) { - struct request *req = elv_next_request(q); + struct request *req = blk_fetch_request(q); if (!req) break; - blkdev_dequeue_request(req); if (__send_request(req) < 0) __blk_end_request_all(req, -EIO); } diff --git a/drivers/block/swim.c b/drivers/block/swim.c index dedd4893f5e..cf7877fb8a7 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -528,10 +528,7 @@ static void redo_fd_request(struct request_queue *q) struct request *req; struct floppy_state *fs; - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - + req = blk_fetch_request(q); while (req) { int err = -EIO; @@ -554,11 +551,8 @@ static void redo_fd_request(struct request_queue *q) break; } done: - if (!__blk_end_request_cur(req, err)) { - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - } + if (!__blk_end_request_cur(req, err)) + req = blk_fetch_request(q); } } diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index f48c6dd47e0..80df93e3cdd 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -326,10 +326,9 @@ static void start_request(struct floppy_state *fs) } while (fs->state == idle) { if (!fd_req) { - fd_req = elv_next_request(swim3_queue); + fd_req = blk_fetch_request(swim3_queue); if (!fd_req) break; - blkdev_dequeue_request(fd_req); } req = fd_req; #if 0 diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index 087c94c8b2d..da403b6a7f4 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -810,12 +810,10 @@ static void carm_oob_rq_fn(struct request_queue *q) while (1) { DPRINTK("get req\n"); - rq = elv_next_request(q); + rq = blk_fetch_request(q); if (!rq) break; - blkdev_dequeue_request(rq); - crq = rq->special; assert(crq != NULL); assert(crq->rq == rq); @@ -846,7 +844,7 @@ static void carm_rq_fn(struct request_queue *q) queue_one_request: VPRINTK("get req\n"); - rq = elv_next_request(q); + rq = blk_peek_request(q); if (!rq) return; @@ -857,7 +855,7 @@ queue_one_request: } crq->rq = rq; - blkdev_dequeue_request(rq); + blk_start_request(rq); if (rq_data_dir(rq) == WRITE) { writing = 1; diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 40d03cf63f2..178f459a50e 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -627,7 +627,7 @@ static void ub_request_fn(struct request_queue *q) struct ub_lun *lun = q->queuedata; struct request *rq; - while ((rq = elv_next_request(q)) != NULL) { + while ((rq = blk_peek_request(q)) != NULL) { if (ub_request_fn_1(lun, rq) != 0) { blk_stop_queue(q); break; @@ -643,13 +643,13 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) int n_elem; if (atomic_read(&sc->poison)) { - blkdev_dequeue_request(rq); + blk_start_request(rq); ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq)); return 0; } if (lun->changed && !blk_pc_request(rq)) { - blkdev_dequeue_request(rq); + blk_start_request(rq); ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq)); return 0; } @@ -660,7 +660,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); - blkdev_dequeue_request(rq); + blk_start_request(rq); urq = &lun->urq; memset(urq, 0, sizeof(struct ub_request)); diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index 2086cb12d3e..390d69bb7c4 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -361,11 +361,9 @@ static void do_viodasd_request(struct request_queue *q) * back later. */ while (num_req_outstanding < VIOMAXREQ) { - req = elv_next_request(q); + req = blk_fetch_request(q); if (req == NULL) return; - /* dequeue the current request from the queue */ - blkdev_dequeue_request(req); /* check that request contains a valid command */ if (!blk_fs_request(req)) { viodasd_end_request(req, -EIO, blk_rq_sectors(req)); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 1980ab45635..29a9daf4862 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -128,7 +128,7 @@ static void do_virtblk_request(struct request_queue *q) struct request *req; unsigned int issued = 0; - while ((req = elv_next_request(q)) != NULL) { + while ((req = blk_peek_request(q)) != NULL) { vblk = req->rq_disk->private_data; BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems); @@ -138,7 +138,7 @@ static void do_virtblk_request(struct request_queue *q) blk_stop_queue(q); break; } - blkdev_dequeue_request(req); + blk_start_request(req); issued++; } diff --git a/drivers/block/xd.c b/drivers/block/xd.c index d4c4352354b..ce242921992 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -305,10 +305,7 @@ static void do_xd_request (struct request_queue * q) if (xdc_busy) return; - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - + req = blk_fetch_request(q); while (req) { unsigned block = blk_rq_pos(req); unsigned count = blk_rq_cur_sectors(req); @@ -325,11 +322,8 @@ static void do_xd_request (struct request_queue * q) block, count); done: /* wrap up, 0 = success, -errno = fail */ - if (!__blk_end_request_cur(req, res)) { - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - } + if (!__blk_end_request_cur(req, res)) + req = blk_fetch_request(q); } } diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 66f834571b8..6d4ac76c280 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -299,13 +299,13 @@ static void do_blkif_request(struct request_queue *rq) queued = 0; - while ((req = elv_next_request(rq)) != NULL) { + while ((req = blk_peek_request(rq)) != NULL) { info = req->rq_disk->private_data; if (RING_FULL(&info->ring)) goto wait; - blkdev_dequeue_request(req); + blk_start_request(req); if (!blk_fs_request(req)) { __blk_end_request_all(req, -EIO); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index edf137b6c37..3a4397edab7 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -463,10 +463,10 @@ struct request *ace_get_next_request(struct request_queue * q) { struct request *req; - while ((req = elv_next_request(q)) != NULL) { + while ((req = blk_peek_request(q)) != NULL) { if (blk_fs_request(req)) break; - blkdev_dequeue_request(req); + blk_start_request(req); __blk_end_request_all(req, -EIO); } return req; @@ -498,10 +498,8 @@ static void ace_fsm_dostate(struct ace_device *ace) __blk_end_request_all(ace->req, -EIO); ace->req = NULL; } - while ((req = elv_next_request(ace->queue)) != NULL) { - blkdev_dequeue_request(req); + while ((req = blk_fetch_request(ace->queue)) != NULL) __blk_end_request_all(req, -EIO); - } /* Drop back to IDLE state and notify waiters */ ace->fsm_state = ACE_FSM_STATE_IDLE; @@ -649,7 +647,7 @@ static void ace_fsm_dostate(struct ace_device *ace) ace->fsm_state = ACE_FSM_STATE_IDLE; break; } - blkdev_dequeue_request(req); + blk_start_request(req); /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c index c909c1a3f65..4575171e5be 100644 --- a/drivers/block/z2ram.c +++ b/drivers/block/z2ram.c @@ -71,10 +71,7 @@ static void do_z2_request(struct request_queue *q) { struct request *req; - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - + req = blk_fetch_request(q); while (req) { unsigned long start = blk_rq_pos(req) << 9; unsigned long len = blk_rq_cur_bytes(req); @@ -100,11 +97,8 @@ static void do_z2_request(struct request_queue *q) len -= size; } done: - if (!__blk_end_request_cur(req, err)) { - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - } + if (!__blk_end_request_cur(req, err)) + req = blk_fetch_request(q); } } diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 3cc02bfe828..1e366ad8f68 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -642,9 +642,7 @@ static void gdrom_request(struct request_queue *rq) { struct request *req; - while ((req = elv_next_request(rq)) != NULL) { - blkdev_dequeue_request(req); - + while ((req = blk_fetch_request(rq)) != NULL) { if (!blk_fs_request(req)) { printk(KERN_DEBUG "GDROM: Non-fs request ignored\n"); __blk_end_request_all(req, -EIO); diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index bbe9f086734..ca741c21e4a 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -297,9 +297,7 @@ static void do_viocd_request(struct request_queue *q) { struct request *req; - while ((rwreq == 0) && ((req = elv_next_request(q)) != NULL)) { - blkdev_dequeue_request(req); - + while ((rwreq == 0) && ((req = blk_fetch_request(q)) != NULL)) { if (!blk_fs_request(req)) __blk_end_request_all(req, -EIO); else if (send_request(req) < 0) { diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 2874c3d703a..8a894fa37b5 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -269,7 +269,7 @@ void ide_retry_pc(ide_drive_t *drive) blk_requeue_request(failed_rq->q, failed_rq); drive->hwif->rq = NULL; if (ide_queue_sense_rq(drive, pc)) { - blkdev_dequeue_request(failed_rq); + blk_start_request(failed_rq); ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); } } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index abda7337b3f..e4e3a0e3201 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -519,11 +519,8 @@ repeat: * we know that the queue isn't empty, but this can happen * if the q->prep_rq_fn() decides to kill a request */ - if (!rq) { - rq = elv_next_request(drive->queue); - if (rq) - blkdev_dequeue_request(rq); - } + if (!rq) + rq = blk_fetch_request(drive->queue); spin_unlock_irq(q->queue_lock); spin_lock_irq(&hwif->lock); @@ -536,7 +533,7 @@ repeat: /* * Sanity: don't accept a request that isn't a PM request * if we are currently power managed. This is very important as - * blk_stop_queue() doesn't prevent the elv_next_request() + * blk_stop_queue() doesn't prevent the blk_fetch_request() * above to return us whatever is in the queue. Since we call * ide_do_request() ourselves, we end up taking requests while * the queue is blocked... diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 58f5be8cd69..c0bebc6a2f2 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -704,13 +704,12 @@ try_again: return 0; } - dev_dbg(&card->dev, "elv_next\n"); - msb->block_req = elv_next_request(msb->queue); + dev_dbg(&card->dev, "blk_fetch\n"); + msb->block_req = blk_fetch_request(msb->queue); if (!msb->block_req) { dev_dbg(&card->dev, "issue end\n"); return -EAGAIN; } - blkdev_dequeue_request(msb->block_req); dev_dbg(&card->dev, "trying again\n"); chunk = 1; @@ -825,10 +824,8 @@ static void mspro_block_submit_req(struct request_queue *q) return; if (msb->eject) { - while ((req = elv_next_request(q)) != NULL) { - blkdev_dequeue_request(req); + while ((req = blk_fetch_request(q)) != NULL) __blk_end_request_all(req, -ENODEV); - } return; } diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 8b5cbfc3ba9..6573ef4408f 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -877,7 +877,7 @@ static void i2o_block_request_fn(struct request_queue *q) struct request *req; while (!blk_queue_plugged(q)) { - req = elv_next_request(q); + req = blk_peek_request(q); if (!req) break; @@ -890,7 +890,7 @@ static void i2o_block_request_fn(struct request_queue *q) if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) { if (!i2o_block_transfer(req)) { - blkdev_dequeue_request(req); + blk_start_request(req); continue; } else osm_info("transfer error\n"); @@ -917,7 +917,7 @@ static void i2o_block_request_fn(struct request_queue *q) break; } } else { - blkdev_dequeue_request(req); + blk_start_request(req); __blk_end_request_all(req, -EIO); } } diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 4b70f1e2834..49e582356c6 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -54,11 +54,8 @@ static int mmc_queue_thread(void *d) spin_lock_irq(q->queue_lock); set_current_state(TASK_INTERRUPTIBLE); - if (!blk_queue_plugged(q)) { - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - } + if (!blk_queue_plugged(q)) + req = blk_fetch_request(q); mq->req = req; spin_unlock_irq(q->queue_lock); @@ -94,10 +91,8 @@ static void mmc_request(struct request_queue *q) if (!mq) { printk(KERN_ERR "MMC: killing requests for dead queue\n"); - while ((req = elv_next_request(q)) != NULL) { - blkdev_dequeue_request(req); + while ((req = blk_fetch_request(q)) != NULL) __blk_end_request_all(req, -EIO); - } return; } diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 3e10442615d..502622f628b 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -100,12 +100,7 @@ static int mtd_blktrans_thread(void *arg) struct mtd_blktrans_dev *dev; int res; - if (!req) { - req = elv_next_request(rq); - if (req) - blkdev_dequeue_request(req); - } - if (!req) { + if (!req && !(req = blk_fetch_request(rq))) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_irq(rq->queue_lock); schedule(); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 7df03c7aea0..e64f62d5e0f 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1656,17 +1656,13 @@ static void __dasd_process_request_queue(struct dasd_block *block) if (basedev->state < DASD_STATE_READY) return; /* Now we try to fetch requests from the request queue */ - while (!blk_queue_plugged(queue) && - elv_next_request(queue)) { - - req = elv_next_request(queue); - + while (!blk_queue_plugged(queue) && (req = blk_peek_request(queue))) { if (basedev->features & DASD_FEATURE_READONLY && rq_data_dir(req) == WRITE) { DBF_DEV_EVENT(DBF_ERR, basedev, "Rejecting write request %p", req); - blkdev_dequeue_request(req); + blk_start_request(req); __blk_end_request_all(req, -EIO); continue; } @@ -1695,7 +1691,7 @@ static void __dasd_process_request_queue(struct dasd_block *block) "CCW creation failed (rc=%ld) " "on request %p", PTR_ERR(cqr), req); - blkdev_dequeue_request(req); + blk_start_request(req); __blk_end_request_all(req, -EIO); continue; } @@ -1705,7 +1701,7 @@ static void __dasd_process_request_queue(struct dasd_block *block) */ cqr->callback_data = (void *) req; cqr->status = DASD_CQR_FILLED; - blkdev_dequeue_request(req); + blk_start_request(req); list_add_tail(&cqr->blocklist, &block->ccw_queue); dasd_profile_start(block, cqr, req); } @@ -2029,10 +2025,8 @@ static void dasd_flush_request_queue(struct dasd_block *block) return; spin_lock_irq(&block->request_queue_lock); - while ((req = elv_next_request(block->request_queue))) { - blkdev_dequeue_request(req); + while ((req = blk_fetch_request(block->request_queue))) __blk_end_request_all(req, -EIO); - } spin_unlock_irq(&block->request_queue_lock); } diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 5d035e4939d..1e796767598 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -93,7 +93,7 @@ __tapeblock_end_request(struct tape_request *ccw_req, void *data) device->blk_data.block_position = -1; device->discipline->free_bread(ccw_req); if (!list_empty(&device->req_queue) || - elv_next_request(device->blk_data.request_queue)) + blk_peek_request(device->blk_data.request_queue)) tapeblock_trigger_requeue(device); } @@ -162,19 +162,16 @@ tapeblock_requeue(struct work_struct *work) { spin_lock_irq(&device->blk_data.request_queue_lock); while ( !blk_queue_plugged(queue) && - elv_next_request(queue) && + (req = blk_fetch_request(queue)) && nr_queued < TAPEBLOCK_MIN_REQUEUE ) { - req = elv_next_request(queue); if (rq_data_dir(req) == WRITE) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); - blkdev_dequeue_request(req); spin_unlock_irq(&device->blk_data.request_queue_lock); blk_end_request_all(req, -EIO); spin_lock_irq(&device->blk_data.request_queue_lock); continue; } - blkdev_dequeue_request(req); nr_queued++; spin_unlock_irq(&device->blk_data.request_queue_lock); rc = tapeblock_start_request(device, req); diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index f572a4a1d14..6d465168468 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -186,10 +186,7 @@ static void jsfd_do_request(struct request_queue *q) { struct request *req; - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - + req = blk_fetch_request(q); while (req) { struct jsfd_part *jdp = req->rq_disk->private_data; unsigned long offset = blk_rq_pos(req) << 9; @@ -212,11 +209,8 @@ static void jsfd_do_request(struct request_queue *q) jsfd_read(req->buffer, jdp->dbase + offset, len); err = 0; end: - if (!__blk_end_request_cur(req, err)) { - req = elv_next_request(q); - if (req) - blkdev_dequeue_request(req); - } + if (!__blk_end_request_cur(req, err)) + req = blk_fetch_request(q); } } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ee308f6f798..b12750f8216 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1207,7 +1207,7 @@ int scsi_prep_return(struct request_queue *q, struct request *req, int ret) break; case BLKPREP_DEFER: /* - * If we defer, the elv_next_request() returns NULL, but the + * If we defer, the blk_peek_request() returns NULL, but the * queue must be restarted, so we plug here if no returning * command will automatically do that. */ @@ -1385,7 +1385,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; - blkdev_dequeue_request(req); + blk_start_request(req); if (unlikely(cmd == NULL)) { printk(KERN_CRIT "impossible request in %s.\n", @@ -1477,7 +1477,7 @@ static void scsi_request_fn(struct request_queue *q) if (!sdev) { printk("scsi: killing requests for dead queue\n"); - while ((req = elv_next_request(q)) != NULL) + while ((req = blk_peek_request(q)) != NULL) scsi_kill_request(req, q); return; } @@ -1498,7 +1498,7 @@ static void scsi_request_fn(struct request_queue *q) * that the request is fully prepared even if we cannot * accept it. */ - req = elv_next_request(q); + req = blk_peek_request(q); if (!req || !scsi_dev_queue_ready(q, sdev)) break; @@ -1514,7 +1514,7 @@ static void scsi_request_fn(struct request_queue *q) * Remove the request from the request list. */ if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req))) - blkdev_dequeue_request(req); + blk_start_request(req); sdev->device_busy++; spin_unlock(q->queue_lock); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 50988cbf7b2..d606452297c 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -163,12 +163,10 @@ static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost, int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); while (!blk_queue_plugged(q)) { - req = elv_next_request(q); + req = blk_fetch_request(q); if (!req) break; - blkdev_dequeue_request(req); - spin_unlock_irq(q->queue_lock); handler = to_sas_internal(shost->transportt)->f->smp_handler; -- cgit v1.2.3-18-g5258 From e20c06fd6950265a899edd96a02dc2e6ae2d1ce5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:08:22 -0700 Subject: x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing(). [ Impact: extend function call API to prepare for new functionality ] Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Cc: Len Brown Cc: Andrew Morton LKML-Reference: <4A01C406.2040303@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 56 +++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index dd18f857dfb..ef53b05a411 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_slot) return -1; } for (loop = 0; loop < len; loop++) { - if ((*cur_slot)->number == rtable->slots[loop].slot) { - if ((*cur_slot)->bus == rtable->slots[loop].bus) { + if ((*cur_slot)->number == rtable->slots[loop].slot && + (*cur_slot)->bus == rtable->slots[loop].bus) { + int ioapic = -1, ioapic_pin = -1; + int triggering, polarity; + (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, - (int) (*cur_slot)->device, i); - - debug("(*cur_slot)->irq[0] = %x\n", - (*cur_slot)->irq[0]); - debug("(*cur_slot)->irq[1] = %x\n", - (*cur_slot)->irq[1]); - debug("(*cur_slot)->irq[2] = %x\n", - (*cur_slot)->irq[2]); - debug("(*cur_slot)->irq[3] = %x\n", - (*cur_slot)->irq[3]); - - debug("rtable->exlusive_irqs = %x\n", + (int) (*cur_slot)->device, i. + &ioapic, &ioapic_pin, + &triggering, &polarity); + + debug("(*cur_slot)->irq[0] = %x\n", + (*cur_slot)->irq[0]); + debug("(*cur_slot)->irq[1] = %x\n", + (*cur_slot)->irq[1]); + debug("(*cur_slot)->irq[2] = %x\n", + (*cur_slot)->irq[2]); + debug("(*cur_slot)->irq[3] = %x\n", + (*cur_slot)->irq[3]); + + debug("rtable->exlusive_irqs = %x\n", rtable->exclusive_irqs); - debug("rtable->slots[loop].irq[0].bitmap = %x\n", + debug("rtable->slots[loop].irq[0].bitmap = %x\n", rtable->slots[loop].irq[0].bitmap); - debug("rtable->slots[loop].irq[1].bitmap = %x\n", + debug("rtable->slots[loop].irq[1].bitmap = %x\n", rtable->slots[loop].irq[1].bitmap); - debug("rtable->slots[loop].irq[2].bitmap = %x\n", + debug("rtable->slots[loop].irq[2].bitmap = %x\n", rtable->slots[loop].irq[2].bitmap); - debug("rtable->slots[loop].irq[3].bitmap = %x\n", + debug("rtable->slots[loop].irq[3].bitmap = %x\n", rtable->slots[loop].irq[3].bitmap); - debug("rtable->slots[loop].irq[0].link = %x\n", + debug("rtable->slots[loop].irq[0].link = %x\n", rtable->slots[loop].irq[0].link); - debug("rtable->slots[loop].irq[1].link = %x\n", + debug("rtable->slots[loop].irq[1].link = %x\n", rtable->slots[loop].irq[1].link); - debug("rtable->slots[loop].irq[2].link = %x\n", + debug("rtable->slots[loop].irq[2].link = %x\n", rtable->slots[loop].irq[2].link); - debug("rtable->slots[loop].irq[3].link = %x\n", + debug("rtable->slots[loop].irq[3].link = %x\n", rtable->slots[loop].irq[3].link); - debug("end of init_devno\n"); - kfree(rtable); - return 0; - } + debug("end of init_devno\n"); + kfree(rtable); + return 0; } } -- cgit v1.2.3-18-g5258 From e6bb7a96c2c36f20c05ef648f15bd3c2b1834c78 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 11 May 2009 17:56:08 +0900 Subject: scsi: simplify the bidi completion Let's use blk_end_request_all() instead of blk_end_bidi_request(). Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 43 +++++++++++++------------------------------ 1 file changed, 13 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b12750f8216..a54bec99438 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -672,33 +672,6 @@ void scsi_release_buffers(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_release_buffers); -/* - * Bidi commands Must be complete as a whole, both sides at once. If - * part of the bytes were written and lld returned scsi_in()->resid - * and/or scsi_out()->resid this information will be left in - * req->resid_len and req->next_rq->resid_len. The upper-layer driver - * can decide what to do with this information. - */ -static void scsi_end_bidi_request(struct scsi_cmnd *cmd) -{ - struct request *req = cmd->request; - - req->resid_len = scsi_out(cmd)->resid; - req->next_rq->resid_len = scsi_in(cmd)->resid; - - /* The req and req->next_rq have not been completed */ - BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req), - blk_rq_bytes(req->next_rq))); - - scsi_release_buffers(cmd); - - /* - * This will goose the queue request function at the end, so we don't - * need to worry about launching another command. - */ - scsi_next_command(cmd); -} - /* * Function: scsi_io_completion() * @@ -772,12 +745,22 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (!sense_deferred) error = -EIO; } + + req->resid_len = scsi_get_resid(cmd); + if (scsi_bidi_cmnd(cmd)) { - /* will also release_buffers */ - scsi_end_bidi_request(cmd); + /* + * Bidi commands Must be complete as a whole, + * both sides at once. + */ + req->next_rq->resid_len = scsi_in(cmd)->resid; + + blk_end_request_all(req, 0); + + scsi_release_buffers(cmd); + scsi_next_command(cmd); return; } - req->resid_len = scsi_get_resid(cmd); } BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */ -- cgit v1.2.3-18-g5258 From 6818173bd658439b83896a2a7586f64ab51bf29c Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 7 May 2009 15:37:36 +0200 Subject: splice: implement default splice_read method If f_op->splice_read() is not implemented, fall back to a plain read. Use vfs_readv() to read into previously allocated pages. This will allow splice and functions using splice, such as the loop device, to work on all filesystems. This includes "direct_io" files in fuse which bypass the page cache. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- drivers/block/loop.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 9ca4bb01465..801f4ab8330 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -709,10 +709,6 @@ static int loop_change_fd(struct loop_device *lo, struct block_device *bdev, if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode)) goto out_putf; - /* new backing store needs to support loop (eg splice_read) */ - if (!inode->i_fop->splice_read) - goto out_putf; - /* size of the new backing store needs to be the same */ if (get_loop_size(lo, file) != get_loop_size(lo, old_file)) goto out_putf; @@ -788,12 +784,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, error = -EINVAL; if (S_ISREG(inode->i_mode) || S_ISBLK(inode->i_mode)) { const struct address_space_operations *aops = mapping->a_ops; - /* - * If we can't read - sorry. If we only can't write - well, - * it's going to be read-only. - */ - if (!file->f_op->splice_read) - goto out_putf; + if (aops->write_begin) lo_flags |= LO_FLAGS_USE_AOPS; if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write) -- cgit v1.2.3-18-g5258 From e458824f9d32e9bf7700d1eb0d201749af48eee0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 08:49:32 +0200 Subject: scsi: fix resid_len mis-conversion in scsi_end_request() Commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f introduced rq->data_len and converted residual count users to it. While converting, it mistakenly converted scsi_end_request() to finish requests with residual count when it wants to do is fully complete the request. Fix it by using blk_end_request_all() instead. This bug was spotted by Boaz Harrosh. Signed-off-by: Tejun Heo Spotted-by: Boaz Harrosh Cc: FUJITA Tomonori Cc: James Bottomley Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a54bec99438..e410d667910 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,14 +546,9 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = blk_rq_bytes(req); - - if (blk_pc_request(req)) - leftover = req->resid_len; - /* kill remainder if no retrys */ if (error && scsi_noretry_cmd(cmd)) - blk_end_request(req, error, leftover); + blk_end_request_all(req, error); else { if (requeue) { /* -- cgit v1.2.3-18-g5258 From b5710ce92a8cf8e3fc0ffc230cfdbfa23463f1c8 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 12 May 2009 18:51:28 +0400 Subject: x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix Fix trivial typo in the drivers/pci/hotplug/ibmphp_core.c changes. [ Impact: build fix ] Signed-off-by: Cyrill Gorcunov CC: Yinghai Lu Cc: eswierk@aristanetworks.com LKML-Reference: <20090512145128.GA10220@lenovo> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index ef53b05a411..79901a0db88 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -161,7 +161,7 @@ int ibmphp_init_devno(struct slot **cur_slot) (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, - (int) (*cur_slot)->device, i. + (int) (*cur_slot)->device, i, &ioapic, &ioapic_pin, &triggering, &polarity); -- cgit v1.2.3-18-g5258 From af777ce42d3d51cdef353ce296d6f99dc503feef Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 13 May 2009 16:59:40 +0900 Subject: sh: clkfwk: module_clk -> peripheral_clk rename. For consistenct naming, and to allow us to fix up some confusion in the SH-Mobile clock framework, amongst other places. Signed-off-by: Paul Mundt --- drivers/i2c/busses/i2c-sh7760.c | 2 +- drivers/serial/sh-sci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c index baa28b73ae4..b9680f50f54 100644 --- a/drivers/i2c/busses/i2c-sh7760.c +++ b/drivers/i2c/busses/i2c-sh7760.c @@ -396,7 +396,7 @@ static int __devinit calc_CCR(unsigned long scl_hz) signed char cdf, cdfm; int scgd, scgdm, scgds; - mclk = clk_get(NULL, "module_clk"); + mclk = clk_get(NULL, "peripheral_clk"); if (IS_ERR(mclk)) { return PTR_ERR(mclk); } else { diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 4e3248d5860..fa4d52a6c03 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1084,7 +1084,7 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_HAVE_CLK) sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "module_clk"); + sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); sci_port->enable = sci_clk_enable; sci_port->disable = sci_clk_disable; #else -- cgit v1.2.3-18-g5258 From 4e5b6d006b61b6b998e15da850d959520f811b4c Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 14:02:32 -0700 Subject: wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/rx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 02419bfd64b..f9fc3890232 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, roq_data = (struct i2400m_roq_data *) &skb->cb; i2400m_net_erx(i2400m, skb, roq_data->cs); } - else { + else __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - } + __i2400m_roq_update_ws(i2400m, roq, sn + 1); i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, old_ws, len, sn, nsn, roq->ws); } -- cgit v1.2.3-18-g5258 From 9e35ad388bea89f7d6f375af4c0ae98803688666 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 13 May 2009 16:21:38 +0200 Subject: perf_counter: Rework the perf counter disable/enable The current disable/enable mechanism is: token = hw_perf_save_disable(); ... /* do bits */ ... hw_perf_restore(token); This works well, provided that the use nests properly. Except we don't. x86 NMI/INT throttling has non-nested use of this, breaking things. Therefore provide a reference counter disable/enable interface, where the first disable disables the hardware, and the last enable enables the hardware again. [ Impact: refactor, simplify the PMU disable/enable logic ] Signed-off-by: Peter Zijlstra Cc: Paul Mackerras Cc: Corey Ashford LKML-Reference: Signed-off-by: Ingo Molnar --- drivers/acpi/processor_idle.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d2830f39d46..9645758c047 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -763,11 +763,9 @@ static int acpi_idle_bm_check(void) */ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) { - u64 perf_flags; - /* Don't trace irqs off for idle */ stop_critical_timings(); - perf_flags = hw_perf_save_disable(); + perf_disable(); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); @@ -782,7 +780,7 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } - hw_perf_restore(perf_flags); + perf_enable(); start_critical_timings(); } -- cgit v1.2.3-18-g5258 From 251e8e3c7235f5944805a64f24c79fc4696793f1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 14 May 2009 05:16:59 +0200 Subject: perf_counter: Remove ACPI quirk We had a disable/enable around acpi_idle_do_entry() due to an erratum in an early prototype CPU i had access to. That erratum has been fixed in the BIOS so remove the quirk. The quirk also kept us from profiling interrupts that hit the ACPI idle instruction - so this is an improvement as well, beyond a cleanup and a micro-optimization. [ Impact: improve profiling scope, cleanup, micro-optimization ] Signed-off-by: Peter Zijlstra Cc: Paul Mackerras Cc: Corey Ashford LKML-Reference: Signed-off-by: Ingo Molnar --- drivers/acpi/processor_idle.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 9645758c047..f7ca8c55956 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -765,7 +765,6 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) { /* Don't trace irqs off for idle */ stop_critical_timings(); - perf_disable(); if (cx->entry_method == ACPI_CSTATE_FFH) { /* Call into architectural FFH based C-state */ acpi_processor_ffh_cstate_enter(cx); @@ -780,7 +779,6 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) gets asserted in time to freeze execution properly. */ unused = inl(acpi_gbl_FADT.xpm_timer_block.address); } - perf_enable(); start_critical_timings(); } -- cgit v1.2.3-18-g5258 From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt Signed-off-by: Tony Lindgren --- drivers/video/omap/dispc.c | 14 ++++++++------ drivers/video/omap/rfbi.c | 8 +++++--- 2 files changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index dfb72f5e4c9..148cbcc3960 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) { - dev_err(dispc.fbdev->dev, "can't get dss_ick\n"); + dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); + if (IS_ERR(dispc.dss_ick)) { + dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) { + dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); + if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - if (IS_ERR((dispc.dss_54m_fck = - clk_get(dispc.fbdev->dev, "dss_54m_fck")))) { - dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n"); + dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); + if (IS_ERR(dispc.dss_54m_fck)) { + dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); clk_put(dispc.dss1_fck); return PTR_ERR(dispc.dss_54m_fck); diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index a13c8dcad2a..9332d6ca645 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx) static int rfbi_get_clocks(void) { - if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) { - dev_err(rfbi.fbdev->dev, "can't get dss_ick\n"); + rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick"); + if (IS_ERR(rfbi.dss_ick)) { + dev_err(rfbi.fbdev->dev, "can't get ick\n"); return PTR_ERR(rfbi.dss_ick); } - if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) { + rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck"); + if (IS_ERR(rfbi.dss1_fck)) { dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); clk_put(rfbi.dss_ick); return PTR_ERR(rfbi.dss1_fck); -- cgit v1.2.3-18-g5258 From e8e7526c3c0863be25ab03a0871ee0978de5ba50 Mon Sep 17 00:00:00 2001 From: Mark de Wever Date: Sun, 17 May 2009 17:22:53 +0200 Subject: ide-tape: fix debug call This error only occurs when IDETAPE_DEBUG_LOG is enabled. Signed-off-by: Mark de Wever Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8dfc68892d6..203bbeac182 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -617,7 +617,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n" + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n", (unsigned long long)rq->sector, rq->nr_sectors); if (!(blk_special_request(rq) || blk_sense_request(rq))) { -- cgit v1.2.3-18-g5258 From 72876a603422d3767273ffb3918033fa1bfda0f3 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 17 May 2009 20:48:59 -0700 Subject: mlx4_en: Fix not deleted napi structures Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_cq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c index 91f50de84be..a276125b709 100644 --- a/drivers/net/mlx4/en_cq.c +++ b/drivers/net/mlx4/en_cq.c @@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) if (cq->is_tx) del_timer(&cq->timer); - else + else { napi_disable(&cq->napi); + netif_napi_del(&cq->napi); + } mlx4_cq_free(mdev->dev, &cq->mcq); } -- cgit v1.2.3-18-g5258 From a8f492c6ac6072d6c5bce4b2f13dc44612991051 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 01:21:58 +0000 Subject: NET: Meth: Fix unsafe mix of irq and non-irq spinlocks. Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 } ... key at: [] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 } ... key at: [] __key.32424+0x0/0x8 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] check_usage+0x470/0x4a0 [] check_irq_usage+0x90/0x130 [] __lock_acquire+0x12a4/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock_irqsave+0x60/0x84 [] meth_tx+0x48/0x43c [] __qdisc_run+0x150/0x30c [] dev_queue_xmit+0x334/0x4b0 [] ip_auto_config+0x8d0/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle Tested-by: Andrew Randrianasulu Signed-off-by: David S. Miller --- drivers/net/meth.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/meth.c b/drivers/net/meth.c index aa08987f6e8..dbd3436912b 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg) static int mdio_probe(struct meth_private *priv) { int i; - unsigned long p2, p3; + unsigned long p2, p3, flags; /* check if phy is detected already */ if(priv->phy_addr>=0&&priv->phy_addr<32) return 0; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); for (i=0;i<32;++i){ priv->phy_addr=i; p2=mdio_read(priv,2); @@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv) break; } } - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if(priv->phy_addr<32) { return 0; } @@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev) static void meth_rx(struct net_device* dev, unsigned long int_status) { struct sk_buff *skb; - unsigned long status; + unsigned long status, flags; struct meth_private *priv = netdev_priv(dev); unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); priv->dma_ctrl &= ~METH_DMA_RX_INT_EN; mace->eth.dma_ctrl = priv->dma_ctrl; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if (int_status & METH_INT_RX_UNDERFLOW) { fifo_rptr = (fifo_rptr - 1) & 0x0f; @@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status) mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write]; ADVANCE_RX_PTR(priv->rx_write); } - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* In case there was underflow, and Rx DMA was disabled */ priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; mace->eth.int_stat = METH_INT_RX_THRESHOLD; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static int meth_tx_full(struct net_device *dev) @@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev) static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) { struct meth_private *priv = netdev_priv(dev); - unsigned long status; + unsigned long status, flags; struct sk_buff *skb; unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* Stop DMA notification */ priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); @@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) } mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static void meth_error(struct net_device* dev, unsigned status) { struct meth_private *priv = netdev_priv(dev); + unsigned long flags; printk(KERN_WARNING "meth: error status: 0x%08x\n",status); /* check for errors too... */ @@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status) printk(KERN_WARNING "meth: Rx overflow\n"); if (status & (METH_INT_RX_UNDERFLOW)) { printk(KERN_WARNING "meth: Rx underflow\n"); - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); mace->eth.int_stat = METH_INT_RX_UNDERFLOW; /* more underflow interrupts will be delivered, * effectively throwing us into an infinite loop. @@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status) priv->dma_ctrl &= ~METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; DPRINTK("Disabled meth Rx DMA temporarily\n"); - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } mace->eth.int_stat = METH_INT_ERROR; } -- cgit v1.2.3-18-g5258 From 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 08:44:32 +0000 Subject: bonding: fix link down handling in 802.3ad mode One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 8c2e5ab51f0..faf094abef7 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, return best; } +static int agg_device_up(const struct aggregator *agg) +{ + return (netif_running(agg->slave->dev) && + netif_carrier_ok(agg->slave->dev)); +} + /** * ad_agg_selection_logic - select an aggregation group for a team * @aggregator: the aggregator we're looking at @@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg) struct port *port; origin = agg; - active = __get_active_agg(agg); - best = active; + best = (active && agg_device_up(active)) ? active : NULL; do { agg->is_active = 0; - if (agg->num_of_ports) + if (agg->num_of_ports && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } while ((agg = __get_next_agg(agg))); -- cgit v1.2.3-18-g5258 From eb0519b5a1cf07d5a1b919cffa0304cdaaa97a7e Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Sun, 17 May 2009 21:16:47 -0700 Subject: mv643xx_eth: fix PPC DMA breakage After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a400d7115f7..6bb5af35eda 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) if (rxq->rx_curr_desc == rxq->rx_ring_size) rxq->rx_curr_desc = 0; - dma_unmap_single(NULL, rx_desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr, rx_desc->buf_size, DMA_FROM_DEVICE); rxq->rx_desc_count--; rx++; @@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget) rx_desc = rxq->rx_desc_area + rx; - rx_desc->buf_ptr = dma_map_single(NULL, skb->data, - mp->skb_size, DMA_FROM_DEVICE); + rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent, + skb->data, mp->skb_size, + DMA_FROM_DEVICE); rx_desc->buf_size = mp->skb_size; rxq->rx_skb[rx] = skb; wmb(); @@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb) static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int frag; @@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) desc->l4i_chk = 0; desc->byte_cnt = this_frag->size; - desc->buf_ptr = dma_map_page(NULL, this_frag->page, - this_frag->page_offset, - this_frag->size, - DMA_TO_DEVICE); + desc->buf_ptr = dma_map_page(mp->dev->dev.parent, + this_frag->page, + this_frag->page_offset, + this_frag->size, DMA_TO_DEVICE); } } @@ -826,7 +828,8 @@ no_csum: desc->l4i_chk = l4i_chk; desc->byte_cnt = length; - desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); + desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data, + length, DMA_TO_DEVICE); __skb_queue_tail(&txq->tx_skb, skb); @@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) } if (cmd_sts & TX_FIRST_DESC) { - dma_unmap_single(NULL, desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } else { - dma_unmap_page(NULL, desc->buf_ptr, + dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } @@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) mp->rx_desc_sram_size); rxq->rx_desc_dma = mp->rx_desc_sram_addr; } else { - rxq->rx_desc_area = dma_alloc_coherent(NULL, size, - &rxq->rx_desc_dma, - GFP_KERNEL); + rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &rxq->rx_desc_dma, + GFP_KERNEL); } if (rxq->rx_desc_area == NULL) { @@ -1947,7 +1950,7 @@ out_free: if (index == 0 && size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, size, + dma_free_coherent(mp->dev->dev.parent, size, rxq->rx_desc_area, rxq->rx_desc_dma); @@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq) rxq->rx_desc_area_size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, rxq->rx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size, rxq->rx_desc_area, rxq->rx_desc_dma); kfree(rxq->rx_skb); @@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) mp->tx_desc_sram_size); txq->tx_desc_dma = mp->tx_desc_sram_addr; } else { - txq->tx_desc_area = dma_alloc_coherent(NULL, size, - &txq->tx_desc_dma, - GFP_KERNEL); + txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &txq->tx_desc_dma, + GFP_KERNEL); } if (txq->tx_desc_area == NULL) { @@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq) txq->tx_desc_area_size <= mp->tx_desc_sram_size) iounmap(txq->tx_desc_area); else - dma_free_coherent(NULL, txq->tx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size, txq->tx_desc_area, txq->tx_desc_dma); } -- cgit v1.2.3-18-g5258 From d77dd8d27e73a9277096453eb901aae0bfd4ca3c Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 15 May 2009 10:19:51 +0000 Subject: Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR? FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-traffic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c index 7be0ae10d69..c2eeac4125f 100644 --- a/drivers/net/vxge/vxge-traffic.c +++ b/drivers/net/vxge/vxge-traffic.c @@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp) VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR| - VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32), + VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32), &vp_reg->kdfcctl_errors_mask); __vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask); -- cgit v1.2.3-18-g5258 From e5198075c67a22ec9a09565b1ce88d3d3f5ba855 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 15 May 2009 13:05:16 -0700 Subject: x86, apic: introduce io_apic_irq_attr according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jesse Barnes Cc: Len Brown LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar --- drivers/pci/hotplug/ibmphp_core.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 79901a0db88..42e4260c3b1 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -155,15 +155,13 @@ int ibmphp_init_devno(struct slot **cur_slot) for (loop = 0; loop < len; loop++) { if ((*cur_slot)->number == rtable->slots[loop].slot && (*cur_slot)->bus == rtable->slots[loop].bus) { - int ioapic = -1, ioapic_pin = -1; - int triggering, polarity; + struct io_apic_irq_attr irq_attr; (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); for (i = 0; i < 4; i++) (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, (int) (*cur_slot)->device, i, - &ioapic, &ioapic_pin, - &triggering, &polarity); + &irq_attr); debug("(*cur_slot)->irq[0] = %x\n", (*cur_slot)->irq[0]); -- cgit v1.2.3-18-g5258 From 6c3b46f74587d46e71b8c2b78fdca626a3aca280 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 18 May 2009 14:38:28 +0200 Subject: virtio_blk: don't blindly derefence req->rq_disk request->rq_disk is only set for FS requests or BLOCK_PC requests originating from the generic block layer scsi ioctls. It's not set for requests origination from other soures or internal cache flush commands implemented by the patch I'll send after this. So instead of using it to get at the private data in do_virtblk_request setup queue->queuedata and use it. Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 29a9daf4862..dfe9ee5f169 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -124,12 +124,11 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, static void do_virtblk_request(struct request_queue *q) { - struct virtio_blk *vblk = NULL; + struct virtio_blk *vblk = q->queuedata; struct request *req; unsigned int issued = 0; while ((req = blk_peek_request(q)) != NULL) { - vblk = req->rq_disk->private_data; BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems); /* If this request fails, stop queue and wait for something to @@ -249,6 +248,7 @@ static int virtblk_probe(struct virtio_device *vdev) goto out_put_disk; } + vblk->disk->queue->queuedata = vblk; queue_flag_set_unlocked(QUEUE_FLAG_VIRT, vblk->disk->queue); if (index < 26) { -- cgit v1.2.3-18-g5258 From 1cde26f928863d90e9e7c1217880c8450464d305 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 18 May 2009 14:41:30 +0200 Subject: virtio_blk: SG_IO passthru support Add support for SG_IO passthru to virtio_blk. We add the scsi command block after the normal outhdr, and the scsi inhdr with full status information aswell as the sense buffer before the regular inhdr. [hch: forward ported, added the VIRTIO_BLK_F_SCSI flags, some comments and tested the whole beast] [axboe: updated to use ->resid and not dual-path the byte count] Signed-off-by: Hannes Reinecke Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell (+ checkpatch.pl tweak) Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 64 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 50 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index dfe9ee5f169..62275dbdf2e 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -37,6 +37,7 @@ struct virtblk_req struct list_head list; struct request *req; struct virtio_blk_outhdr out_hdr; + struct virtio_scsi_inhdr in_hdr; u8 status; }; @@ -49,7 +50,9 @@ static void blk_done(struct virtqueue *vq) spin_lock_irqsave(&vblk->lock, flags); while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) { + unsigned int nr_bytes; int error; + switch (vbr->status) { case VIRTIO_BLK_S_OK: error = 0; @@ -62,6 +65,12 @@ static void blk_done(struct virtqueue *vq) break; } + if (blk_pc_request(vbr->req)) { + vbr->req->resid_len = vbr->in_hdr.residual; + vbr->req->sense_len = vbr->in_hdr.sense_len; + vbr->req->errors = vbr->in_hdr.errors; + } + __blk_end_request_all(vbr->req, error); list_del(&vbr->list); mempool_free(vbr, vblk->pool); @@ -74,7 +83,7 @@ static void blk_done(struct virtqueue *vq) static bool do_req(struct request_queue *q, struct virtio_blk *vblk, struct request *req) { - unsigned long num, out, in; + unsigned long num, out = 0, in = 0; struct virtblk_req *vbr; vbr = mempool_alloc(vblk->pool, GFP_ATOMIC); @@ -99,18 +108,36 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, if (blk_barrier_rq(vbr->req)) vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER; - sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr)); - num = blk_rq_map_sg(q, vbr->req, vblk->sg+1); - sg_set_buf(&vblk->sg[num+1], &vbr->status, sizeof(vbr->status)); + sg_set_buf(&vblk->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr)); - if (rq_data_dir(vbr->req) == WRITE) { - vbr->out_hdr.type |= VIRTIO_BLK_T_OUT; - out = 1 + num; - in = 1; - } else { - vbr->out_hdr.type |= VIRTIO_BLK_T_IN; - out = 1; - in = 1 + num; + /* + * If this is a packet command we need a couple of additional headers. + * Behind the normal outhdr we put a segment with the scsi command + * block, and before the normal inhdr we put the sense data and the + * inhdr with additional status information before the normal inhdr. + */ + if (blk_pc_request(vbr->req)) + sg_set_buf(&vblk->sg[out++], vbr->req->cmd, vbr->req->cmd_len); + + num = blk_rq_map_sg(q, vbr->req, vblk->sg + out); + + if (blk_pc_request(vbr->req)) { + sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96); + sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr, + sizeof(vbr->in_hdr)); + } + + sg_set_buf(&vblk->sg[num + out + in++], &vbr->status, + sizeof(vbr->status)); + + if (num) { + if (rq_data_dir(vbr->req) == WRITE) { + vbr->out_hdr.type |= VIRTIO_BLK_T_OUT; + out += num; + } else { + vbr->out_hdr.type |= VIRTIO_BLK_T_IN; + in += num; + } } if (vblk->vq->vq_ops->add_buf(vblk->vq, vblk->sg, out, in, vbr)) { @@ -148,8 +175,16 @@ static void do_virtblk_request(struct request_queue *q) static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, unsigned long data) { - return scsi_cmd_ioctl(bdev->bd_disk->queue, - bdev->bd_disk, mode, cmd, + struct gendisk *disk = bdev->bd_disk; + struct virtio_blk *vblk = disk->private_data; + + /* + * Only allow the generic SCSI ioctls if the host can support it. + */ + if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI)) + return -ENOIOCTLCMD; + + return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, (void __user *)data); } @@ -356,6 +391,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, + VIRTIO_BLK_F_SCSI, }; static struct virtio_driver virtio_blk = { -- cgit v1.2.3-18-g5258 From f831cc03490c78a76e2d35ad77ec2292d0323728 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 18 May 2009 14:44:45 +0200 Subject: virtio_blk: get rid of unused variable drivers/block/virtio_blk.c: In function 'blk_done': drivers/block/virtio_blk.c:53: warning: unused variable 'nr_bytes' Leftover from commit 1cde26f928863d90e9e7c1217880c8450464d305 Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 62275dbdf2e..511d4ae2d17 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -50,7 +50,6 @@ static void blk_done(struct virtqueue *vq) spin_lock_irqsave(&vblk->lock, flags); while ((vbr = vblk->vq->vq_ops->get_buf(vblk->vq, &len)) != NULL) { - unsigned int nr_bytes; int error; switch (vbr->status) { -- cgit v1.2.3-18-g5258 From c4ca2374312b4de819dd700e72a68395eddb5fcb Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Mon, 18 May 2009 15:38:55 -0700 Subject: be2net: add two new pci device ids to pci device table Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 14 ++++++++++++++ drivers/net/benet/be_main.c | 10 +++++----- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index c49ddd08b2a..b4bb06fdf30 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -35,8 +35,22 @@ #define DRV_VER "2.0.348" #define DRV_NAME "be2net" #define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" +#define OC_NAME "Emulex OneConnect 10Gbps NIC" #define DRV_DESC BE_NAME "Driver" +#define BE_VENDOR_ID 0x19a2 +#define BE_DEVICE_ID1 0x211 +#define OC_DEVICE_ID1 0x700 +#define OC_DEVICE_ID2 0x701 + +static inline char *nic_name(struct pci_dev *pdev) +{ + if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2) + return OC_NAME; + else + return BE_NAME; +} + /* Number of bytes of an RX frame that are copied to skb->data */ #define BE_HDR_LEN 64 #define BE_MAX_JUMBO_FRAME_SIZE 9018 diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 30d0c81c989..5c378b5e8e4 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048; module_param(rx_frag_size, uint, S_IRUGO); MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); -#define BE_VENDOR_ID 0x19a2 -#define BE2_DEVICE_ID_1 0x0211 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = { - { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) }, + { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, { 0 } }; MODULE_DEVICE_TABLE(pci, be_dev_ids); @@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status != 0) goto stats_clean; - dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num); + dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num); return 0; stats_clean: @@ -1873,7 +1873,7 @@ rel_reg: disable_dev: pci_disable_device(pdev); do_none: - dev_warn(&pdev->dev, BE_NAME " initialization failed\n"); + dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); return status; } -- cgit v1.2.3-18-g5258 From 28afea5b2ffaa48f4f43d22ae8edcc384c05df80 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:25:48 +0200 Subject: xen/blkfront: allow xenbus state transition to Closing->Closed when not Connected This situation can occur when attempting to attach a block device whose backend is an empty physical CD-ROM driver. The backend in this case will go directly from the Initialising state to Closing->Closed. Previously this would result in a NULL pointer deref on info->gd (xenbus_dev_fatal does not return as a1a15ac5 seems to expect) Cc: stable@kernel.org Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8f905089b72..6971a12e8b9 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - if (info->gd == NULL) - xenbus_dev_fatal(dev, -ENODEV, "gd is NULL"); + if (info->gd == NULL) { + xenbus_frontend_closed(dev); + break; + } bd = bdget_disk(info->gd, 0); if (bd == NULL) xenbus_dev_fatal(dev, -ENODEV, "bdget failed"); -- cgit v1.2.3-18-g5258 From 31a14400e8f365e5d4d1a0b2a1ef4d5405d6091e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:27:42 +0200 Subject: xen/blkfront: fix warning when deleting gendisk on unplug/shutdown Currently blkfront gives a warning when hot unplugging due to calling del_gendisk() with interrupts disabled (due to blkif_io_lock). WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84() Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3 Call Trace: [] warn_slowpath+0x80/0xb6 [] xen_sched_clock+0x16/0x63 [] xen_force_evtchn_callback+0xc/0x10 [] check_events+0x8/0xe [] xen_restore_fl_direct_end+0x0/0x1 [] xen_mc_flush+0x10a/0x13f [] __switch_to+0x114/0x14e [] dequeue_task+0x62/0x70 [] finish_task_switch+0x2b/0x84 [] schedule+0x66d/0x6e7 [] xen_force_evtchn_callback+0xc/0x10 [] xen_force_evtchn_callback+0xc/0x10 [] local_bh_enable+0x36/0x84 [] sk_filter+0x57/0x5c [] netlink_broadcast+0x1d5/0x315 [] kobject_uevent_env+0x28d/0x331 [] device_del+0x10f/0x120 [] device_unregister+0x8/0x10 [] bdi_unregister+0x2d/0x39 [] unlink_gendisk+0x23/0x3e [] del_gendisk+0x7b/0xe7 [] blkfront_closing+0x28/0x6e [xen_blkfront] [] backend_changed+0x3ad/0x41d [xen_blkfront] We can fix this by calling del_gendisk() later in blkfront_closing, after releasing blkif_io_lock. Since the queue is stopped during the interrupts disabled phase I don't think there is any danger of an event occuring between releasing the blkif_io_lock and deleting the disk. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6971a12e8b9..a6cbf7b808e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev) spin_lock_irqsave(&blkif_io_lock, flags); - del_gendisk(info->gd); - /* No more blkif_request(). */ blk_stop_queue(info->rq); @@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev) blk_cleanup_queue(info->rq); info->rq = NULL; + del_gendisk(info->gd); + out: xenbus_frontend_closed(dev); } -- cgit v1.2.3-18-g5258 From 3755100dd5f66761aaaa7ae44c70b319a7c78a56 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 May 2009 18:33:04 +0900 Subject: ub: use __blk_end_request_all() ub_end_rq() always tries to complete full request. The @cmd_len parameter was there because rq->data_len used to be overwritten with residue count. Drop @cmd_len and use __blk_end_request_all(). Signed-off-by: Tejun Heo Cc: Pete Zaitcev Signed-off-by: Jens Axboe --- drivers/block/ub.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 178f459a50e..f32781cff45 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -360,8 +360,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, struct ub_scsi_cmd *cmd, struct ub_request *urq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_end_rq(struct request *rq, unsigned int status, - unsigned int cmd_len); +static void ub_end_rq(struct request *rq, unsigned int status); static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, struct ub_request *urq, struct ub_scsi_cmd *cmd); static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); @@ -644,13 +643,13 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) if (atomic_read(&sc->poison)) { blk_start_request(rq); - ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq)); + ub_end_rq(rq, DID_NO_CONNECT << 16); return 0; } if (lun->changed && !blk_pc_request(rq)) { blk_start_request(rq); - ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq)); + ub_end_rq(rq, SAM_STAT_CHECK_CONDITION); return 0; } @@ -702,7 +701,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) drop: ub_put_cmd(lun, cmd); - ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq)); + ub_end_rq(rq, DID_ERROR << 16); return 0; } @@ -777,7 +776,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) struct ub_request *urq = cmd->back; struct request *rq; unsigned int scsi_status; - unsigned int cmd_len; rq = urq->rq; @@ -816,17 +814,14 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) urq->rq = NULL; - cmd_len = cmd->len; ub_put_cmd(lun, cmd); - ub_end_rq(rq, scsi_status, cmd_len); + ub_end_rq(rq, scsi_status); blk_start_queue(lun->disk->queue); } -static void ub_end_rq(struct request *rq, unsigned int scsi_status, - unsigned int cmd_len) +static void ub_end_rq(struct request *rq, unsigned int scsi_status) { int error; - long rqlen; if (scsi_status == 0) { error = 0; @@ -834,12 +829,7 @@ static void ub_end_rq(struct request *rq, unsigned int scsi_status, error = -EIO; rq->errors = scsi_status; } - rqlen = blk_rq_bytes(rq); /* Oddly enough, this is the residue. */ - if (__blk_end_request(rq, error, cmd_len)) { - printk(KERN_WARNING DRV_NAME - ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n", - blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen); - } + __blk_end_request_all(rq, error); } static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, -- cgit v1.2.3-18-g5258 From 5f49f63178360b07a095bd33b0d850d60edf7590 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 May 2009 18:33:05 +0900 Subject: block: set rq->resid_len to blk_rq_bytes() on issue In commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing rq->resid_len, the default value of residue count was changed from full count to zero. The conversion was done under the assumption that when a request fails residue count wasn't defined. However, Boaz and James pointed out that this wasn't true and the residue count should be preserved for failed requests too. This patchset restores the original behavior by setting rq->resid_len to blk_rq_bytes(rq) on request start and restoring explicit clearing in affected drivers. While at it, take advantage of the fact that rq->resid_len is set to full count where applicable. * ide-cd: rq->resid_len cleared on pc success * mptsas: req->resid_len cleared on success * sas_expander: rsp/req->resid_len cleared on success * mpt2sas_transport: req->resid_len cleared on success * ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take advantage of initial full count to simplify code Boaz Harrosh spotted bug in resid_len initialization. Fixed as suggested. Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Cc: Boaz Harrosh Cc: James Bottomley Cc: Pete Zaitcev Cc: Bartlomiej Zolnierkiewicz Cc: Sergei Shtylyov Cc: Eric Moore Cc: Darrick J. Wong Signed-off-by: Jens Axboe --- drivers/block/ub.c | 6 ++++-- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- drivers/message/fusion/mptsas.c | 3 ++- drivers/scsi/libsas/sas_expander.c | 4 ++++ drivers/scsi/libsas/sas_host_smp.c | 3 --- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 ++-- 7 files changed, 15 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index f32781cff45..e67bbae9547 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -781,8 +781,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (cmd->error == 0) { if (blk_pc_request(rq)) { - if (cmd->act_len < blk_rq_bytes(rq)) - rq->resid_len = blk_rq_bytes(rq) - cmd->act_len; + if (cmd->act_len >= rq->resid_len) + rq->resid_len = 0; + else + rq->resid_len -= cmd->act_len; scsi_status = 0; } else { if (cmd->act_len != cmd->len) { diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 4c7792fd5f9..081aed6781c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -699,6 +699,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end: if (blk_pc_request(rq) && rc == 0) { + rq->resid_len = 0; blk_end_request_all(rq, 0); hwif->rq = NULL; } else { @@ -718,8 +719,7 @@ out_end: /* make sure it's fully ended */ if (blk_fs_request(rq) == 0) { - rq->resid_len = blk_rq_bytes(rq) - - (cmd->nbytes - cmd->nleft); + rq->resid_len -= cmd->nbytes - cmd->nleft; if (uptodate == 0 && (cmd->tf_flags & IDE_TFLAG_WRITE)) rq->resid_len += cmd->last_xfer_len; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index e16604562f2..683ff37d407 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->resid_len = blk_rq_bytes(rq) - blocks * tape->blk_size; + rq->resid_len -= blocks * tape->blk_size; if (pc->error) { uptodate = 0; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 4e6fcf06a6f..79f5433359f 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1357,7 +1357,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; memcpy(req->sense, smprep, sizeof(*smprep)); req->sense_len = sizeof(*smprep); - rsp->resid_len = blk_rq_bytes(rsp) - smprep->ResponseDataLength; + req->resid_len = 0; + rsp->resid_len -= smprep->ResponseDataLength; } else { printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n", ioc->name, __func__); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 531af9ed719..54fa1e42dc4 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1937,7 +1937,11 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, if (ret > 0) { /* positive number is the untransferred residual */ rsp->resid_len = ret; + req->resid_len = 0; ret = 0; + } else if (ret == 0) { + rsp->resid_len = 0; + req->resid_len = 0; } return ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index be9a951b977..1bc3b756799 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -176,9 +176,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; - req->resid_len = blk_rq_bytes(req); - rsp->resid_len = blk_rq_bytes(rsp); - switch (req_data[1]) { case SMP_REPORT_GENERAL: req->resid_len -= 8; diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index af95a449930..5c65da519e3 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1170,8 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - rsp->resid_len = blk_rq_bytes(rsp) - - mpi_reply->ResponseDataLength; + req->resid_len = 0; + rsp->resid_len -= mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); -- cgit v1.2.3-18-g5258 From bc38bf106c967389a465d926be22c7371abba69d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 17 May 2009 18:56:17 +0300 Subject: libosd: Use new blk_rq_map_kern Now that blk_rq_map_kern will append the buffer onto the request we can use it easily for adding extra segments (eg. attributes) This patch is dependent on a block layer patch titled: [BLOCK] allow blk_rq_map_kern to append to requests Signed-off-by: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/scsi/osd/osd_initiator.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index d178a8b799e..bf66e301866 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -826,26 +826,6 @@ int osd_req_add_set_attr_list(struct osd_request *or, } EXPORT_SYMBOL(osd_req_add_set_attr_list); -static int _append_map_kern(struct request *req, - void *buff, unsigned len, gfp_t flags) -{ - struct bio *bio; - int ret; - - bio = bio_map_kern(req->q, buff, len, flags); - if (IS_ERR(bio)) { - OSD_ERR("Failed bio_map_kern(%p, %d) => %ld\n", buff, len, - PTR_ERR(bio)); - return PTR_ERR(bio); - } - ret = blk_rq_append_bio(req->q, req, bio); - if (ret) { - OSD_ERR("Failed blk_rq_append_bio(%p) => %d\n", bio, ret); - bio_put(bio); - } - return ret; -} - static int _req_append_segment(struct osd_request *or, unsigned padding, struct _osd_req_data_segment *seg, struct _osd_req_data_segment *last_seg, struct _osd_io_info *io) @@ -861,14 +841,14 @@ static int _req_append_segment(struct osd_request *or, else pad_buff = io->pad_buff; - ret = _append_map_kern(io->req, pad_buff, padding, + ret = blk_rq_map_kern(io->req->q, io->req, pad_buff, padding, or->alloc_flags); if (ret) return ret; io->total_bytes += padding; } - ret = _append_map_kern(io->req, seg->buff, seg->total_bytes, + ret = blk_rq_map_kern(io->req->q, io->req, seg->buff, seg->total_bytes, or->alloc_flags); if (ret) return ret; -- cgit v1.2.3-18-g5258 From c29b70f6ee4f2fa3ef07f55bc9082945861e5391 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 17 May 2009 18:58:41 +0300 Subject: libosd: Use of new blk_make_request Use new blk_make_request() to allocate a request from bio and avoid using deprecated blk_rq_append_bio(). This patch is dependent on a block layer patch titled: [BLOCK] New blk_make_request() takes bio returns request This is the last usage of blk_rq_append_bio in osd, it can now be un-exported. Signed-off-by: Boaz Harrosh CC: Jeff Garzik CC: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/osd/osd_initiator.c | 48 +++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index bf66e301866..865ec0f4aa8 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1200,6 +1200,21 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, /* * osd_finalize_request and helpers */ +static struct request *_make_request(struct request_queue *q, bool has_write, + struct _osd_io_info *oii, gfp_t flags) +{ + if (oii->bio) + return blk_make_request(q, oii->bio, flags); + else { + struct request *req; + + req = blk_get_request(q, has_write ? WRITE : READ, flags); + if (unlikely(!req)) + return ERR_PTR(-ENOMEM); + + return req; + } +} static int _init_blk_request(struct osd_request *or, bool has_in, bool has_out) @@ -1208,11 +1223,13 @@ static int _init_blk_request(struct osd_request *or, struct scsi_device *scsi_device = or->osd_dev->scsi_device; struct request_queue *q = scsi_device->request_queue; struct request *req; - int ret = -ENOMEM; + int ret; - req = blk_get_request(q, has_out, flags); - if (!req) + req = _make_request(q, has_out, has_out ? &or->out : &or->in, flags); + if (IS_ERR(req)) { + ret = PTR_ERR(req); goto out; + } or->request = req; req->cmd_type = REQ_TYPE_BLOCK_PC; @@ -1225,9 +1242,10 @@ static int _init_blk_request(struct osd_request *or, or->out.req = req; if (has_in) { /* allocate bidi request */ - req = blk_get_request(q, READ, flags); - if (!req) { + req = _make_request(q, false, &or->in, flags); + if (IS_ERR(req)) { OSD_DEBUG("blk_get_request for bidi failed\n"); + ret = PTR_ERR(req); goto out; } req->cmd_type = REQ_TYPE_BLOCK_PC; @@ -1271,26 +1289,6 @@ int osd_finalize_request(struct osd_request *or, return ret; } - if (or->out.bio) { - ret = blk_rq_append_bio(or->request->q, or->out.req, - or->out.bio); - if (ret) { - OSD_DEBUG("blk_rq_append_bio out failed\n"); - return ret; - } - OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", - _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req)); - } - if (or->in.bio) { - ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); - if (ret) { - OSD_DEBUG("blk_rq_append_bio in failed\n"); - return ret; - } - OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", - _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req)); - } - or->out.pad_buff = sg_out_pad_buffer; or->in.pad_buff = sg_in_pad_buffer; -- cgit v1.2.3-18-g5258 From 8e7d2b2c6ecd3c21a54b877eae3d5be48292e6b5 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 8 May 2009 16:13:25 -0700 Subject: drm/i915: allocate large pointer arrays with vmalloc For awhile now, many of the GEM code paths have allocated page or object arrays with the slab allocator. This is nice and fast, but won't work well if memory is fragmented, since the slab allocator works with physically contiguous memory (i.e. order > 2 allocations are likely to fail fairly early after booting and doing some work). This patch works around the issue by falling back to vmalloc for >PAGE_SIZE allocations. This is ugly, but much less work than chaining a bunch of pages together by hand (suprisingly there's not a bunch of generic kernel helpers for this yet afaik). vmalloc space is somewhat precious on 32 bit kernels, but our allocations shouldn't be big enough to cause problems, though they're routinely more than a page. Note that this patch doesn't address the unchecked alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate patch. Also, I've deliberately ignored the DRM's "area" junk. I don't think anyone actually uses it anymore and I'm hoping it gets ripped out soon. [Updated: removed size arg to new free function. We could unify the free functions as well once the DRM mem tracking is ripped out.] fd.o bug #20152 (part 1/3) Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 38 +++++++++++++++----------------------- 1 file changed, 15 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b189b49c760..4a24c90fb94 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -349,7 +349,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -429,7 +429,7 @@ fail_put_user_pages: SetPageDirty(user_pages[i]); page_cache_release(user_pages[i]); } - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -649,7 +649,7 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -719,7 +719,7 @@ out_unlock: out_unpin_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -824,7 +824,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -902,7 +902,7 @@ fail_unlock: fail_put_user_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -1408,9 +1408,7 @@ i915_gem_object_put_pages(struct drm_gem_object *obj) } obj_priv->dirty = 0; - drm_free(obj_priv->pages, - page_count * sizeof(struct page *), - DRM_MEM_DRIVER); + drm_free_large(obj_priv->pages); obj_priv->pages = NULL; } @@ -2024,8 +2022,7 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) */ page_count = obj->size / PAGE_SIZE; BUG_ON(obj_priv->pages != NULL); - obj_priv->pages = drm_calloc(page_count, sizeof(struct page *), - DRM_MEM_DRIVER); + obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *)); if (obj_priv->pages == NULL) { DRM_ERROR("Faled to allocate page list\n"); obj_priv->pages_refcount--; @@ -3111,7 +3108,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, reloc_count += exec_list[i].relocation_count; } - *relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER); + *relocs = drm_calloc_large(reloc_count, sizeof(**relocs)); if (*relocs == NULL) return -ENOMEM; @@ -3125,8 +3122,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, exec_list[i].relocation_count * sizeof(**relocs)); if (ret != 0) { - drm_free(*relocs, reloc_count * sizeof(**relocs), - DRM_MEM_DRIVER); + drm_free_large(*relocs); *relocs = NULL; return -EFAULT; } @@ -3165,7 +3161,7 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, } err: - drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER); + drm_free_large(relocs); return ret; } @@ -3198,10 +3194,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } /* Copy in the exec list from userland */ - exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, - DRM_MEM_DRIVER); - object_list = drm_calloc(sizeof(*object_list), args->buffer_count, - DRM_MEM_DRIVER); + exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count); + object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count); if (exec_list == NULL || object_list == NULL) { DRM_ERROR("Failed to allocate exec or object list " "for %d buffers\n", @@ -3462,10 +3456,8 @@ err: } pre_mutex_err: - drm_free(object_list, sizeof(*object_list) * args->buffer_count, - DRM_MEM_DRIVER); - drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, - DRM_MEM_DRIVER); + drm_free_large(object_list); + drm_free_large(exec_list); drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects, DRM_MEM_DRIVER); -- cgit v1.2.3-18-g5258 From ac36552a52a6ec8563ac0a109e2a0935673f4abb Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 19 May 2009 19:54:09 +0200 Subject: scsi_lib: remove unused variable The last request completion cleanup in scsi_lib left an unused this_count variable in scsi_io_completion(). (It was used before in a code segment that now uses blk_end_request_all()) Signed-off-by: Boaz Harrosh Acked-by: Tejun Heo Acked-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e410d667910..d7c6c752e0a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -706,7 +706,6 @@ EXPORT_SYMBOL(scsi_release_buffers); void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -789,7 +788,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; - this_count = blk_rq_bytes(req); error = -EIO; -- cgit v1.2.3-18-g5258 From b126d113484886d900179b4ae55ea7fabe15f936 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Apr 2009 14:48:36 +0100 Subject: mfd: Keep a cache of WM8350 volatile values Due to the way that the WM8350 audio driver handles CODEC_ENA many of the WM8350 audio registers are marked as volatile when they aren't actually so. Allow the audio driver to see a cache of these values for inspection during interrupt context. To do this we need to stop satisfying any bits from volatile registers from cache - there's no real benefit from doing so anyway, we did the read already. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index c2be3088e2e..fe24079387c 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, /* Cache is CPU endian */ dest[i - reg] = be16_to_cpu(dest[i - reg]); - /* Satisfy non-volatile bits from cache */ - dest[i - reg] &= wm8350_reg_io_map[i].vol; - dest[i - reg] |= wm8350->reg_cache[i]; - /* Mask out non-readable bits */ dest[i - reg] &= wm8350_reg_io_map[i].readable; } @@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; - /* Don't store volatile bits */ - wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; - src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { value = be16_to_cpu(wm8350->reg_cache[i]); value &= wm8350_reg_io_map[i].readable; - value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; -- cgit v1.2.3-18-g5258 From f43ab901005c2bb3c5440e91b6efae9f5db02e7c Mon Sep 17 00:00:00 2001 From: Nelson Castillo Date: Tue, 12 May 2009 13:26:47 -0700 Subject: mfd: pcf50633: fix unsafe disable_irq() Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock. As pointed out in other patches this issue is in the wild since the merge of: : commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 : Author: Thomas Gleixner : Date: Mon Mar 23 18:28:15 2009 +0100 : : genirq: add threaded interrupt handler support : : Add support for threaded interrupt handlers Signed-off-by: Nelson Castillo Cc: Ingo Molnar Cc: Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Samuel Ortiz --- drivers/mfd/pcf50633-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 7793932a513..11a6248cc1c 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) dev_dbg(pcf->dev, "pcf50633_irq\n"); get_device(pcf->dev); - disable_irq(pcf->irq); + disable_irq_nosync(pcf->irq); schedule_work(&pcf->irq_work); return IRQ_HANDLED; -- cgit v1.2.3-18-g5258 From b3bad72e494fb2ff0c81be4ca2ddb94adf6a47c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 17 May 2009 20:17:06 +0200 Subject: PCI PM: Fix initialization and kexec breakage for some devices Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 34bf0fdf504..1a91bf9687a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ - pci_update_current_state(dev, PCI_D0); + if (!dev->pm_cap) + dev->current_state = PCI_D0; } return error; -- cgit v1.2.3-18-g5258 From fbaa58696cef848de818768783ef185bd3f05158 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 13 May 2009 12:50:40 -0400 Subject: TPM: get_event_name stack corruption get_event_name uses sprintf to fill a buffer declared on the stack. It fills the buffer 2 bytes at a time. What the code doesn't take into account is that sprintf(buf, "%02x", data) actually writes 3 bytes. 2 bytes for the data and then it nul terminates the string. Since we declare buf to be 40 characters long and then we write 40 bytes of data into buf sprintf is going to write 41 characters. The fix is to leave room in buf for the nul terminator. Signed-off-by: Eric Paris Signed-off-by: James Morris --- drivers/char/tpm/tpm_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index ed306eb1057..0c2f55a38b9 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event, unsigned char * event_entry) { const char *name = ""; - char data[40] = ""; + /* 41 so there is room for 40 data and 1 nul */ + char data[41] = ""; int i, n_len = 0, d_len = 0; struct tcpa_pc_event *pc_event; -- cgit v1.2.3-18-g5258 From b674137755bbe2750f997a2a1264db3cdf8abcb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 May 2009 11:56:16 +1000 Subject: drm: Round size of SHM maps to PAGE_SIZE Currently, userspace can fail to obtain the SAREA mapping (among other reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the page size. This breaks for example on PowerPC with 64K pages and radeon despite the kernel radeon actually doing the right rouding in the first place. The way SAREA_MAX is defined with a bunch of ifdef's and duplicated between libdrm and the X server is gross, ultimately it should be retrieved by userspace from the kernel, but in the meantime, we have plenty of existing userspace built with bad values that need to work. This patch works around broken userspace by rounding the requested size in drm_addmap_core() of any SHM map to the page size. Since the backing memory for SHM maps is also allocated within addmap_core, there is no danger of adjacent memory being exposed due to the increased map size. The only side effect is that drivers that previously tried to create or access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL), will now succeed at the cost of a little bit more memory used if that happens to be when the map is created. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_bufs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 6d80d17f1e9..0411d912d82 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, } DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n", (unsigned long long)map->offset, map->size, map->type); + + /* page-align _DRM_SHM maps. They are allocated here so there is no security + * hole created by that and it works around various broken drivers that use + * a non-aligned quantity to map the SAREA. --BenH + */ + if (map->type == _DRM_SHM) + map->size = PAGE_ALIGN(map->size); + if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) { drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; -- cgit v1.2.3-18-g5258 From 62669e61a5f559826b1d2e863649a6005eee629b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 May 2009 11:27:13 +0900 Subject: sh: mach-hp6xx: Fix up the hp6xx build for hd64461 changes. Fixes several compile errors due to the recent hd64461 I/O base changes. Signed-off-by: Paul Mundt --- drivers/video/hitfb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index e6467cf9f19..020db7fc915 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -335,9 +335,9 @@ static int __init hitfb_probe(struct platform_device *dev) if (fb_get_options("hitfb", NULL)) return -ENODEV; - hitfb_fix.mmio_start = CONFIG_HD64461_IOBASE+0x1000; + hitfb_fix.mmio_start = HD64461_IO_OFFSET(0x1000); hitfb_fix.mmio_len = 0x1000; - hitfb_fix.smem_start = CONFIG_HD64461_IOBASE + 0x02000000; + hitfb_fix.smem_start = HD64461_IO_OFFSET(0x02000000); hitfb_fix.smem_len = 512 * 1024; lcdclor = fb_readw(HD64461_LCDCLOR); -- cgit v1.2.3-18-g5258 From d3375ea7213d09284ee3683d8bc075b9d3786a03 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 08:42:06 +0200 Subject: cdrom: beyond ARRAY_SIZE of viocd_diskinfo Do not go beyond ARRAY_SIZE of viocd_diskinfo Signed-off-by: Roel Kluin Signed-off-by: Jens Axboe --- drivers/cdrom/viocd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 13929356135..9b1624e0dde 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) struct device_node *node = vdev->dev.archdata.of_node; deviceno = vdev->unit_address; - if (deviceno > VIOCD_MAX_CD) + if (deviceno >= VIOCD_MAX_CD) return -ENODEV; if (!node) return -ENODEV; -- cgit v1.2.3-18-g5258 From 2b611cb6eed04062d0a9861c82248e02c844ba3f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Mar 2009 17:47:27 -0400 Subject: ath5k: fix scanning in AR2424 AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 7a17d31b2fd..faede828c8f 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -359,7 +359,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) mode |= AR5K_PHY_MODE_FREQ_5GHZ; if (ah->ah_radio == AR5K_RF5413) - clock |= AR5K_PHY_PLL_40MHZ_5413; + clock = AR5K_PHY_PLL_40MHZ_5413; else clock |= AR5K_PHY_PLL_40MHZ; -- cgit v1.2.3-18-g5258 From a54be5d43aa2d6febc5a4f8dd3b87b9429b60437 Mon Sep 17 00:00:00 2001 From: Forrest Zhang Date: Wed, 13 May 2009 11:14:39 -0400 Subject: ath5k: fix exp off-by-one when computing OFDM delta slope Commit e8f055f0c3b ("ath5k: Update reset code") subtly changed the code that computes floating point values for the PHY3_TIMING register such that the exponent is off by a decimal point, which can cause problems with OFDM channel operation. get_bitmask_order() actually returns the highest bit set plus one, whereas the previous code wanted the highest bit set. Instead, use ilog2 which is what this code is really calculating. Also check coef_scaled to handle the (invalid) case where we need log2(0). Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index faede828c8f..5f72c111c2e 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -26,7 +26,7 @@ \*****************************/ #include /* To determine if a card is pci-e */ -#include /* For get_bitmask_order */ +#include #include "ath5k.h" #include "reg.h" #include "base.h" @@ -69,10 +69,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, /* Get exponent * ALGO: coef_exp = 14 - highest set bit position */ - coef_exp = get_bitmask_order(coef_scaled); + coef_exp = ilog2(coef_scaled); /* Doesn't make sense if it's zero*/ - if (!coef_exp) + if (!coef_scaled || !coef_exp) return -EINVAL; /* Note: we've shifted coef_scaled by 24 */ -- cgit v1.2.3-18-g5258 From fbc9f97bbf5e1eaee562eba93dc60faaff3f3bfa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 15 May 2009 16:13:46 -0700 Subject: iwlwifi: do not cancel delayed work inside spin_lock_irqsave Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane Signed-off-by: Reinette Chatre Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 7 ------- drivers/net/wireless/iwlwifi/iwl-scan.c | 7 ++++--- drivers/net/wireless/iwlwifi/iwl3945-base.c | 9 ++------- 3 files changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3bb28db4a40..f46ba247577 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -669,13 +669,6 @@ static int iwl_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl_commit_rxon(priv); return 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index e7c65c4f741..6330b91e37c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -227,9 +227,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); - /* The scan completion notification came in, so kill that timer... */ - cancel_delayed_work(&priv->scan_check); - IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n", (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? "2.4" : "5.2", @@ -712,6 +709,8 @@ static void iwl_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; @@ -925,6 +924,8 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + cancel_delayed_work(&priv->scan_check); + ieee80211_scan_completed(priv->hw, false); if (test_bit(STATUS_EXIT_PENDING, &priv->status)) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4cce6613350..ff4d0e41d7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -782,13 +782,6 @@ static int iwl3945_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl3945_commit_rxon(priv); return 0; @@ -3298,6 +3291,8 @@ static void iwl3945_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; -- cgit v1.2.3-18-g5258 From 875690c378d64d9ee2de15cad8206d3f11ae5096 Mon Sep 17 00:00:00 2001 From: Fabio Rossi Date: Wed, 1 Apr 2009 20:37:50 +0200 Subject: ath5k: fix interpolation with equal power levels When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 49 +++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 9e2faae5ae9..b48b29dca3d 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1487,28 +1487,35 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, { s8 tmp; s16 min_pwrL, min_pwrR; - s16 pwr_i = pwrL[0]; - - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrL[0], pwrL[1], - stepL[0], stepL[1]); - - } while (tmp > 1); - - min_pwrL = pwr_i; - - pwr_i = pwrR[0]; - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrR[0], pwrR[1], - stepR[0], stepR[1]); - - } while (tmp > 1); + s16 pwr_i; + + if (pwrL[0] == pwrL[1]) + min_pwrL = pwrL[0]; + else { + pwr_i = pwrL[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + } while (tmp > 1); + + min_pwrL = pwr_i; + } - min_pwrR = pwr_i; + if (pwrR[0] == pwrR[1]) + min_pwrR = pwrR[0]; + else { + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + } while (tmp > 1); + + min_pwrR = pwr_i; + } /* Keep the right boundary so that it works for both curves */ return max(min_pwrL, min_pwrR); -- cgit v1.2.3-18-g5258 From 267d493b322b05984048aef8ea9b5b213490bbe0 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 20 May 2009 10:51:41 -0400 Subject: airo: fix airo_get_encode{,ext} buffer overflow like I mean it... "airo: airo_get_encode{,ext} potential buffer overflow" was actually a no-op, due to an unrecognized type overflow in an assignment. Oddly, gcc only seems to tell me about it when using -Wextra...grrr... Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index d7347573912..9eabf4d1f2e 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6467,6 +6467,7 @@ static int airo_get_encode(struct net_device *dev, { struct airo_info *local = dev->ml_priv; int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6500,11 +6501,13 @@ static int airo_get_encode(struct net_device *dev, dwrq->flags |= index + 1; /* Copy the key to the user buffer */ - dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - if (dwrq->length != -1) - memcpy(extra, buf, dwrq->length); - else + wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { dwrq->length = 0; + } else { + dwrq->length = wep_key_len; + memcpy(extra, buf, dwrq->length); + } return 0; } @@ -6617,7 +6620,7 @@ static int airo_get_encodeext(struct net_device *dev, struct airo_info *local = dev->ml_priv; struct iw_point *encoding = &wrqu->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; + int idx, max_key_len, wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6661,11 +6664,13 @@ static int airo_get_encodeext(struct net_device *dev, memset(extra, 0, 16); /* Copy the key to the user buffer */ - ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - if (ext->key_len != -1) - memcpy(extra, buf, ext->key_len); - else + wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { ext->key_len = 0; + } else { + ext->key_len = wep_key_len; + memcpy(extra, buf, ext->key_len); + } return 0; } -- cgit v1.2.3-18-g5258 From c9d2fbf36df5e04efa226614093bb1bacc6fe131 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Tue, 19 May 2009 14:56:36 -0700 Subject: iwlwifi: update 5000 ucode support to version 2 of API enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e5ca2511a81..9452461ce86 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -46,7 +46,7 @@ #include "iwl-6000-hw.h" /* Highest firmware API version supported */ -#define IWL5000_UCODE_API_MAX 1 +#define IWL5000_UCODE_API_MAX 2 #define IWL5150_UCODE_API_MAX 2 /* Lowest firmware API version supported */ -- cgit v1.2.3-18-g5258 From a6c67339784db5763d6f20ae1881aeebe8c5a9f4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 02:12:56 +0200 Subject: wireless: beyond ARRAY_SIZE of intf->crypto_stats Do not go beyond ARRAY_SIZE of intf->crypto_stats Signed-off-by: Roel Kluin Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 07d378ef0b4..7b3ee8c2eae 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -138,7 +138,7 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, if (cipher == CIPHER_TKIP_NO_MIC) cipher = CIPHER_TKIP; - if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX) return; /* Remove CIPHER_NONE index */ -- cgit v1.2.3-18-g5258 From 9b6fe313bfce27d4a261257da70196be0ac2bef5 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 20 May 2009 13:32:00 +0200 Subject: drm: Copy back ioctl data to userspace regardless of return code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes a regression from commit 9d5b3ffc42f7820e8ee07705496955e4c2c38dd9 ('drm: fixup some of the ioctl function exit paths'): The vblank ioctl needs to update the userspace parameters when interrupted by a signal, which was prevented by the return code check. This could cause the X server to hang in drmWaitVBlank(). Signed-off-by: Michel Dänzer Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index f01def16a66..019b7c57823 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, } retcode = func(dev, kdata, file_priv); - if ((retcode == 0) && (cmd & IOC_OUT)) { + if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) retcode = -EFAULT; -- cgit v1.2.3-18-g5258 From 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 20 May 2009 22:39:08 +0100 Subject: [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini Signed-off-by: Russell King --- drivers/input/serio/ambakmi.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/rtc/rtc-pl030.c | 2 +- drivers/rtc/rtc-pl031.c | 2 +- drivers/serial/amba-pl010.c | 2 +- drivers/serial/amba-pl011.c | 2 +- drivers/video/amba-clcd.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index e29cdc13a19..a28c06d686e 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int amba_kmi_probe(struct amba_device *dev, void *id) +static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 36875dcfa49..7d4febdab28 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + HZ); } -static int __devinit mmci_probe(struct amba_device *dev, void *id) +static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmc_platform_data *plat = dev->dev.platform_data; struct mmci_host *host; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index 82615355215..aaf1f75fa29 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, void *id) +static int pl030_probe(struct amba_device *dev, struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 333eec689d2..451fc13784d 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, void *id) +static int pl031_probe(struct amba_device *adev, struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e3a5ad5ef1d..cdc049d4350 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -665,7 +665,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl010_probe(struct amba_device *dev, void *id) +static int pl010_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 8b2b9700f3e..88fdac51b6c 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -729,7 +729,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl011_probe(struct amba_device *dev, void *id) +static int pl011_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 61050ab1412..d1f80bac54f 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } -static int clcdfb_probe(struct amba_device *dev, void *id) +static int clcdfb_probe(struct amba_device *dev, struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; -- cgit v1.2.3-18-g5258 From 05ff3004d278b54760abd71530506d803182c71d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 01:28:33 +0900 Subject: sh: irq: Teach ipr and intc about dynamically allocating irq_descs. This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 12d13d99b6f..098b767e9af 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -671,7 +671,7 @@ unsigned int intc_evt2irq(unsigned int vector) void __init register_intc_controller(struct intc_desc *desc) { - unsigned int i, k, smp; + unsigned int i, k, smp, cpu = smp_processor_id(); struct intc_desc_int *d; d = alloc_bootmem(sizeof(*d)); @@ -770,11 +770,19 @@ void __init register_intc_controller(struct intc_desc *desc) /* register the vectors one by one */ for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; + unsigned int irq = evt2irq(vect->vect); + struct irq_desc *irq_desc; if (!vect->enum_id) continue; - intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect)); + irq_desc = irq_to_desc_alloc_cpu(irq, cpu); + if (unlikely(!irq_desc)) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; + } + + intc_register_irq(desc, d, vect->enum_id, irq); } } -- cgit v1.2.3-18-g5258 From c40499e04b2005e61f989824251f9343b55f96bb Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 21 May 2009 15:04:15 -0700 Subject: gigaset: beyond ARRAY_SIZE of iwb->data Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/isdn/gigaset/isocdata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index b171e75cb52..29808c4fb1c 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -175,7 +175,7 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size) return -EINVAL; } src = iwb->read; - if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD || + if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD || (read < src && limit >= src))) { pr_err("isoc write buffer frame reservation violated\n"); return -EFAULT; -- cgit v1.2.3-18-g5258 From 8e9bb19ef97d6594e735bee64b6d72103e350854 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:34:43 +0000 Subject: video: stop sh_mobile_lcdcfb only if started This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 92ea0ab44ce..f10d2fbeda0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv { #endif unsigned long lddckr; struct sh_mobile_lcdc_chan ch[2]; + int started; }; /* shared registers */ @@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* start the lcdc */ sh_mobile_lcdc_start_stop(priv, 1); + priv->started = 1; /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { @@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) } /* stop the lcdc */ - sh_mobile_lcdc_start_stop(priv, 0); + if (priv->started) { + sh_mobile_lcdc_start_stop(priv, 0); + priv->started = 0; + } /* stop clocks */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) -- cgit v1.2.3-18-g5258 From 2f3ed17e010e8c0873094016f93c1afbb4adb666 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 22 May 2009 13:47:52 +0900 Subject: sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily. irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in -next, but as we can not presently enable SPARSE_IRQ without the early irq_desc alloc patch, protect it with an ifdef until the interface has settled and we are ready to enable it system-wide. Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index 098b767e9af..caf06569404 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -771,16 +771,19 @@ void __init register_intc_controller(struct intc_desc *desc) for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; unsigned int irq = evt2irq(vect->vect); +#ifdef CONFIG_SPARSE_IRQ struct irq_desc *irq_desc; - +#endif if (!vect->enum_id) continue; +#ifdef CONFIG_SPARSE_IRQ irq_desc = irq_to_desc_alloc_cpu(irq, cpu); if (unlikely(!irq_desc)) { printk(KERN_INFO "can not get irq_desc for %d\n", irq); continue; } +#endif intc_register_irq(desc, d, vect->enum_id, irq); } -- cgit v1.2.3-18-g5258 From e069c0cf7c169ae5a8bfdc8d083a5d66fbef73d8 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 15:51:44 -0700 Subject: wimax/i2400m: usb: fix device reset on autosuspend while not yet idle When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/usb.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index ca4151a9e22..17851321b7f 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg) #ifdef CONFIG_PM struct usb_device *usb_dev = i2400mu->usb_dev; #endif + unsigned is_autosuspend = 0; struct i2400m *i2400m = &i2400mu->i2400m; +#ifdef CONFIG_PM + if (usb_dev->auto_pm > 0) + is_autosuspend = 1; +#endif + d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event); if (i2400m->updown == 0) goto no_firmware; - d_printf(1, dev, "fw up, requesting standby\n"); + if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) { + /* ugh -- the device is connected and this suspend + * request is an autosuspend one (not a system standby + * / hibernate). + * + * The only way the device can go to standby is if the + * link with the base station is in IDLE mode; that + * were the case, we'd be in status + * I2400M_SS_CONNECTED_IDLE. But we are not. + * + * If we *tell* him to go power save now, it'll reset + * as a precautionary measure, so if this is an + * autosuspend thing, say no and it'll come back + * later, when the link is IDLE + */ + result = -EBADF; + d_printf(1, dev, "fw up, link up, not-idle, autosuspend: " + "not entering powersave\n"); + goto error_not_now; + } + d_printf(1, dev, "fw up: entering powersave\n"); atomic_dec(&i2400mu->do_autopm); result = i2400m_cmd_enter_powersave(i2400m); atomic_inc(&i2400mu->do_autopm); -#ifdef CONFIG_PM - if (result < 0 && usb_dev->auto_pm == 0) { + if (result < 0 && !is_autosuspend) { /* System suspend, can't fail */ dev_err(dev, "failed to suspend, will reset on resume\n"); result = 0; } -#endif if (result < 0) goto error_enter_powersave; i2400mu_notification_release(i2400mu); - d_printf(1, dev, "fw up, got standby\n"); + d_printf(1, dev, "powersave requested\n"); error_enter_powersave: +error_not_now: no_firmware: d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n", iface, pm_msg.event, result); -- cgit v1.2.3-18-g5258 From b9ed7252d219c1c663944bf03846eabb515dbe75 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 22 May 2009 09:25:32 +0200 Subject: xen-blkfront: beyond ARRAY_SIZE of info->shadow Do not go beyond ARRAY_SIZE of info->shadow Signed-off-by: Roel Kluin Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6d4ac76c280..6d5950839bd 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -122,7 +122,7 @@ static DEFINE_SPINLOCK(blkif_io_lock); static int get_id_from_freelist(struct blkfront_info *info) { unsigned long free = info->shadow_free; - BUG_ON(free > BLK_RING_SIZE); + BUG_ON(free >= BLK_RING_SIZE); info->shadow_free = info->shadow[free].req.id; info->shadow[free].req.id = 0x0fffffee; /* debug */ return free; -- cgit v1.2.3-18-g5258 From f47edc6dab11801c2e97088ba7bbce042ded867c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 22 May 2009 16:46:52 +0800 Subject: fsldma: fix check on potential fdev->chan[] overflow Fix the check of potential array overflow when using corrupted channel device tree nodes. Signed-off-by: Roel Kluin Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index da8a8ed9e41..391b1bd7098 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -830,7 +830,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7; - if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) { + if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) { dev_err(fdev->dev, "There is no %d channel!\n", new_fsl_chan->id); err = -EINVAL; -- cgit v1.2.3-18-g5258 From 138ef0185177a6d221d24b6aa8f12d867fbbef90 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Tue, 19 May 2009 15:42:13 -0700 Subject: fsldma: fix "DMA halt timeout!" errors When using the DMA controller from multiple threads at the same time, it is possible to get lots of "DMA halt timeout!" errors printed to the kernel log. This occurs due to a race between fsl_dma_memcpy_issue_pending() and the interrupt handler, fsl_dma_chan_do_interrupt(). Both call the fsl_chan_xfer_ld_queue() function, which does not protect against concurrent accesses to dma_halt() and dma_start(). The existing spinlock is moved to cover the dma_halt() and dma_start() functions. Testing shows that the "DMA halt timeout!" errors disappear. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 391b1bd7098..a4151c3bb78 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -598,15 +598,16 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) dma_addr_t next_dest_addr; unsigned long flags; + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + if (!dma_is_idle(fsl_chan)) - return; + goto out_unlock; dma_halt(fsl_chan); /* If there are some link descriptors * not transfered in queue. We need to start it. */ - spin_lock_irqsave(&fsl_chan->desc_lock, flags); /* Find the first un-transfer desciptor */ for (ld_node = fsl_chan->ld_queue.next; @@ -617,8 +618,6 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) fsl_chan->common.cookie) == DMA_SUCCESS); ld_node = ld_node->next); - spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); - if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; @@ -630,6 +629,9 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) set_cdar(fsl_chan, 0); set_ndar(fsl_chan, 0); } + +out_unlock: + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); } /** -- cgit v1.2.3-18-g5258 From bcfb7465c03a8c62c89da374677df56f6b894d44 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 14:27:16 -0700 Subject: fsldma: fix infinite loop on multi-descriptor DMA chain completion When creating a DMA transaction with multiple descriptors, the async_tx cookie is set to 0 for each descriptor in the chain, excluding the last descriptor, whose cookie is set to -EBUSY. When fsl_dma_tx_submit() is run, it only assigns a cookie to the first descriptor. All of the remaining descriptors keep their original value, including the last descriptor, which is set to -EBUSY. After the DMA completes, the driver will update the last completed cookie to be -EBUSY, which is an error code instead of a valid cookie. This causes dma_async_is_complete() to always return DMA_IN_PROGRESS. This causes the fsldma driver to never cleanup the queue of link descriptors, and the driver will re-run the DMA transaction on the hardware each time it receives the End-of-Chain interrupt. This causes an infinite loop. With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every descriptor in the chain. The rest of the code then works without problems. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index a4151c3bb78..7313a1ae5f8 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -313,8 +313,8 @@ static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable) static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan); + struct fsl_desc_sw *desc; unsigned long flags; dma_cookie_t cookie; @@ -322,14 +322,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_irqsave(&fsl_chan->desc_lock, flags); cookie = fsl_chan->common.cookie; - cookie++; - if (cookie < 0) - cookie = 1; - desc->async_tx.cookie = cookie; - fsl_chan->common.cookie = desc->async_tx.cookie; - - append_ld_queue(fsl_chan, desc); - list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev); + list_for_each_entry(desc, &tx->tx_list, node) { + cookie++; + if (cookie < 0) + cookie = 1; + + desc->async_tx.cookie = cookie; + } + + fsl_chan->common.cookie = cookie; + append_ld_queue(fsl_chan, tx_to_fsl_desc(tx)); + list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev); spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); -- cgit v1.2.3-18-g5258 From 776c8943f2766f2819fafd88fdfbaf418ecd6e41 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 11:33:20 -0700 Subject: fsldma: snooping is not enabled for last entry in descriptor chain On the 83xx controller, snooping is necessary for the DMA controller to ensure cache coherence with the CPU when transferring to/from RAM. The last descriptor in a chain will always have the End-of-Chain interrupt bit set, so we can set the snoop bit while adding the End-of-Chain interrupt bit. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 7313a1ae5f8..ff9194d7ebb 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -179,9 +179,14 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan) static void set_ld_eol(struct fsl_dma_chan *fsl_chan, struct fsl_desc_sw *desc) { + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) + ? FSL_DMA_SNEN : 0; + desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, - DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL, - 64); + DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL + | snoop_bits, 64); } static void append_ld_queue(struct fsl_dma_chan *fsl_chan, -- cgit v1.2.3-18-g5258 From 2e077f8e8337e52eef3c39c24c31e103b11a0326 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 09:59:46 -0700 Subject: fsldma: fix memory leak on error path in fsl_dma_prep_memcpy() When preparing a memcpy operation, if the kernel fails to allocate memory for a link descriptor after the first link descriptor has already been allocated, then some memory will never be released. Fix the problem by walking the list of allocated descriptors backwards, and freeing the allocated descriptors back into the DMA pool. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ff9194d7ebb..15783102bf1 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -462,8 +462,8 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( { struct fsl_dma_chan *fsl_chan; struct fsl_desc_sw *first = NULL, *prev = NULL, *new; + struct list_head *list; size_t copy; - LIST_HEAD(link_chain); if (!chan) return NULL; @@ -480,7 +480,7 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( if (!new) { dev_err(fsl_chan->dev, "No free memory for link descriptor\n"); - return NULL; + goto fail; } #ifdef FSL_DMA_LD_DEBUG dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); @@ -515,7 +515,19 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( /* Set End-of-link to the last link descriptor of new list*/ set_ld_eol(fsl_chan, new); - return first ? &first->async_tx : NULL; + return &first->async_tx; + +fail: + if (!first) + return NULL; + + list = &first->async_tx.tx_list; + list_for_each_entry_safe_reverse(new, prev, list, node) { + list_del(&new->node); + dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); + } + + return NULL; } /** -- cgit v1.2.3-18-g5258 From 8369d5fa63260cc54464b4687aa6a0f78402d98e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:36 +0200 Subject: ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2) Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c19a221b1e1..06fe002116e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { @@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; -- cgit v1.2.3-18-g5258 From e3b29f05124b07303088795396ff858811d2acb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix OOPS during ide-cd error recovery On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser Reported-and-tested-by: Modestas Vainius Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c..6415a2e2ba8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { ide_unlock_port(hwif); plug_device = 1; } @@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); ide_unlock_port(hwif); plug_device = 1; -- cgit v1.2.3-18-g5258 From 26bfcf21e25fa090f099fa0ccf201424989cbd7b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix printk() levels in ide_dump_ata[pi]_error() Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d..85b9bae111f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -91,7 +91,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -121,7 +121,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) -- cgit v1.2.3-18-g5258 From cc30137a221372c67a943ad9ea68121a2bd57a6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: improve failed opcode reporting Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 85b9bae111f..2148df836ce 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - struct ide_cmd *cmd = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - cmd = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (cmd == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", cmd->tf.command); -} - u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { struct ide_taskfile *tf = &cmd->tf; @@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); -- cgit v1.2.3-18-g5258 From 28ee9bc5cc42776e0364399b401a64906ac1ac8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: report timeouts in ide_busy_sleep() * change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed1141..c895ed52b2e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) + if (ide_busy_sleep(drive, timeout, use_altstatus)) return 1; /* wait for IRQ and ATA_DRQ */ @@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) return rc; } -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { + ide_hwif_t *hwif = drive->hwif; u8 stat; timeout += jiffies; @@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } @@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); rc = ide_dev_read_id(drive, cmd, id); } -- cgit v1.2.3-18-g5258 From 5993856e53fbc4b4f28e2d481deaebeb715b1267 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 22 May 2009 16:23:39 +0200 Subject: via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte Cc: Joseph Chan Cc: Bruce Chang Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 3ff7231e485..028de26a25f 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -67,6 +67,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, -- cgit v1.2.3-18-g5258 From 9a2845c453d170e4e9b1437fa671dbf39b0e7bd8 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 20 May 2009 13:36:17 -0500 Subject: ipmi: fix ipmi_si modprobe hang Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard Cc: Ferenc Wagner Cc: Dan Frazier Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index aa83a0865ec..09050797c76 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, /* Assume a single IPMB channel at zero. */ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; + intf->curr_channel = IPMI_MAX_CHANNELS; } if (rv == 0) @@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t intf, } /* - ** We need to make sure the channels have been initialized. - ** The channel_handler routine will set the "curr_channel" - ** equal to or greater than IPMI_MAX_CHANNELS when all the - ** channels for this interface have been initialized. - */ + * We need to make sure the channels have been initialized. + * The channel_handler routine will set the "curr_channel" + * equal to or greater than IPMI_MAX_CHANNELS when all the + * channels for this interface have been initialized. + */ if (intf->curr_channel < IPMI_MAX_CHANNELS) { - requeue = 1; /* Just put the message back for now */ + requeue = 0; /* Throw the message away */ goto out; } -- cgit v1.2.3-18-g5258 From 14b60391587ab9b2207c4fb6281763a93ae85e0f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 20 May 2009 16:47:08 -0400 Subject: i915: support 8xx desktop cursors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For some reason we never added 8xx desktop cursor support to the kernel. This patch fixes that. [krh: Also set the size on pre-i915 hw.] Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 4 ++-- drivers/gpu/drm/i915/i915_reg.h | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++------ 3 files changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4a24c90fb94..717b6a854bc 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,7 +1145,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } /* Need a new fence register? */ @@ -1375,7 +1375,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); return ret; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } drm_gem_object_unreference(obj); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 15da44cf21b..9668cc0d7f4 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1410,9 +1410,25 @@ /* Cursor A & B regs */ #define CURACNTR 0x70080 +/* Old style CUR*CNTR flags (desktop 8xx) */ +#define CURSOR_ENABLE 0x80000000 +#define CURSOR_GAMMA_ENABLE 0x40000000 +#define CURSOR_STRIDE_MASK 0x30000000 +#define CURSOR_FORMAT_SHIFT 24 +#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) +/* New style CUR*CNTR flags */ +#define CURSOR_MODE 0x27 #define CURSOR_MODE_DISABLE 0x00 #define CURSOR_MODE_64_32B_AX 0x07 #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_PIPE_SELECT (1 << 28) +#define MCURSOR_PIPE_A 0x00 +#define MCURSOR_PIPE_B (1 << 28) #define MCURSOR_GAMMA_ENABLE (1 << 26) #define CURABASE 0x70084 #define CURAPOS 0x70088 @@ -1420,6 +1436,7 @@ #define CURSOR_POS_SIGN 0x8000 #define CURSOR_X_SHIFT 0 #define CURSOR_Y_SHIFT 16 +#define CURSIZE 0x700a0 #define CURBCNTR 0x700c0 #define CURBBASE 0x700c4 #define CURBPOS 0x700c8 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3387cf32f38..c9d6f10ba92 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1357,7 +1357,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, int pipe = intel_crtc->pipe; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; - uint32_t temp; + uint32_t temp = I915_READ(control); size_t addr; int ret; @@ -1366,7 +1366,12 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG("cursor off\n"); - temp = CURSOR_MODE_DISABLE; + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); + temp |= CURSOR_MODE_DISABLE; + } else { + temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); + } addr = 0; bo = NULL; mutex_lock(&dev->struct_mutex); @@ -1409,10 +1414,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = obj_priv->phys_obj->handle->busaddr; } - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + if (!IS_I9XX(dev)) + I915_WRITE(CURSIZE, (height << 12) | width); + + /* Hooray for CUR*CNTR differences */ + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + temp |= (pipe << 28); /* Connect to correct pipe */ + } else { + temp &= ~(CURSOR_FORMAT_MASK); + temp |= CURSOR_ENABLE; + temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE; + } finish: I915_WRITE(control, temp); -- cgit v1.2.3-18-g5258 From 8863170628da4b0b461eb96bf797df1dca0bd03e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:19:55 +0800 Subject: drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 3 +- drivers/gpu/drm/i915/intel_bios.c | 102 +++++++++++++++++++++++++++----------- drivers/gpu/drm/i915/intel_bios.h | 17 +++++++ drivers/gpu/drm/i915/intel_lvds.c | 4 +- 4 files changed, 93 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9b149fe824c..c431fa54bbb 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -180,7 +180,8 @@ typedef struct drm_i915_private { int backlight_duty_cycle; /* restore backlight to this value */ bool panel_wants_dither; struct drm_display_mode *panel_fixed_mode; - struct drm_display_mode *vbt_mode; /* if any */ + struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ + struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ /* Feature bits from the VBIOS */ unsigned int int_tv_support:1; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index fc28e2bbd54..9d78cff33b2 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -57,9 +57,43 @@ find_section(struct bdb_header *bdb, int section_id) return NULL; } -/* Try to find panel data */ static void -parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, + struct lvds_dvo_timing *dvo_timing) +{ + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + + drm_mode_set_name(panel_fixed_mode); +} + +/* Try to find integrated panel data */ +static void +parse_lfp_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) { struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; @@ -91,38 +125,45 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), DRM_MEM_DRIVER); - panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | - dvo_timing->hactive_lo; - panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + - ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); - panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + - dvo_timing->hsync_pulse_width; - panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + - ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + fill_detail_timing_data(panel_fixed_mode, dvo_timing); - panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | - dvo_timing->vactive_lo; - panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + - dvo_timing->vsync_off; - panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + - dvo_timing->vsync_pulse_width; - panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + - ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); - panel_fixed_mode->clock = dvo_timing->clock * 10; - panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; - /* Some VBTs have bogus h/vtotal values */ - if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) - panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; - if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) - panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); + drm_mode_debug_printmodeline(panel_fixed_mode); - drm_mode_set_name(panel_fixed_mode); + return; +} + +/* Try to find sdvo panel data */ +static void +parse_sdvo_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_sdvo_lvds_options *sdvo_lvds_options; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; - dev_priv->vbt_mode = panel_fixed_mode; + dev_priv->sdvo_lvds_vbt_mode = NULL; - DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); - drm_mode_debug_printmodeline(panel_fixed_mode); + sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); + if (!sdvo_lvds_options) + return; + + dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); + if (!dvo_timing) + return; + + panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), + DRM_MEM_DRIVER); + + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, + dvo_timing + sdvo_lvds_options->panel_type); + + dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode; return; } @@ -199,7 +240,8 @@ intel_init_bios(struct drm_device *dev) /* Grab useful general definitions */ parse_general_features(dev_priv, bdb); - parse_panel_data(dev_priv, bdb); + parse_lfp_panel_data(dev_priv, bdb); + parse_sdvo_panel_data(dev_priv, bdb); pci_unmap_rom(pdev, bios); diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index de621aad85b..8ca2cde1580 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -279,6 +279,23 @@ struct vch_bdb_22 { struct vch_panel_data panels[16]; } __attribute__((packed)); +struct bdb_sdvo_lvds_options { + u8 panel_backlight; + u8 h40_set_panel_type; + u8 panel_type; + u8 ssc_clk_freq; + u16 als_low_trip; + u16 als_high_trip; + u8 sclalarcoeff_tab_row_num; + u8 sclalarcoeff_tab_row_size; + u8 coefficient[8]; + u8 panel_misc_bits_1; + u8 panel_misc_bits_2; + u8 panel_misc_bits_3; + u8 panel_misc_bits_4; +} __attribute__((packed)); + + bool intel_init_bios(struct drm_device *dev); /* diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 439a8651499..53731f0ffcb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -511,10 +511,10 @@ void intel_lvds_init(struct drm_device *dev) } /* Failed to get EDID, what about VBT? */ - if (dev_priv->vbt_mode) { + if (dev_priv->lfp_lvds_vbt_mode) { mutex_lock(&dev->mode_config.mutex); dev_priv->panel_fixed_mode = - drm_mode_duplicate(dev, dev_priv->vbt_mode); + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); mutex_unlock(&dev->mode_config.mutex); if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= -- cgit v1.2.3-18-g5258 From 7086c87fb1446ceb37918ffa0941359a7c2ec6cf Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:20:06 +0800 Subject: drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. Some new SDVO LVDS hardware doesn't have DDC available, and this should fix the display on it. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9913651c1e1..f79ebf4de63 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -69,6 +69,10 @@ struct intel_sdvo_priv { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; + /** + * This is set if we detect output of sdvo device as LVDS. + */ + bool is_lvds; /** * Returned SDTV resolutions allowed for the current format, if the @@ -1543,6 +1547,37 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) } } +static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct drm_i915_private *dev_priv = connector->dev->dev_private; + + /* + * Attempt to get the mode list from DDC. + * Assume that the preferred modes are + * arranged in priority order. + */ + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + intel_ddc_get_modes(intel_output); + if (list_empty(&connector->probed_modes) == false) + return; + + /* Fetch modes from VBT */ + if (dev_priv->sdvo_lvds_vbt_mode != NULL) { + struct drm_display_mode *newmode; + newmode = drm_mode_duplicate(connector->dev, + dev_priv->sdvo_lvds_vbt_mode); + if (newmode != NULL) { + /* Guarantee the mode is preferred */ + newmode->type = (DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER); + drm_mode_probed_add(connector, newmode); + } + } +} + static int intel_sdvo_get_modes(struct drm_connector *connector) { struct intel_output *output = to_intel_output(connector); @@ -1550,6 +1585,8 @@ static int intel_sdvo_get_modes(struct drm_connector *connector) if (sdvo_priv->is_tv) intel_sdvo_get_tv_modes(connector); + else if (sdvo_priv->is_lvds == true) + intel_sdvo_get_lvds_modes(connector); else intel_sdvo_get_ddc_modes(connector); @@ -1720,6 +1757,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* In defaut case sdvo lvds is false */ + sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (sdvo_priv->caps.output_flags & @@ -1773,6 +1812,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { @@ -1780,6 +1820,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else { -- cgit v1.2.3-18-g5258 From ad5b2a6db3eddc41358d8a73f5cfe1c38e7e3a19 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Fri, 15 May 2009 09:10:41 +0200 Subject: drm/i915: Determine type before initialising connector drm_connector_init sets both the connector type and the connector type_id on the newly initialised connector. As the connector type_id is coupled to the connector type, the connector type cannot simply be modified on an initialised connector. This patch changes the order of operations on intel_sdvo_init so that the type is determined before the connector is intialised. This fixes a bug whereby the name card0-VGA-1 would be allocted to both a CRT and an SDVO connector since the SDVO connector would be initialised with type 'unknown' and hence have its type_id assigned from the wrong pool. Signed-off-by: Jonas Bonn Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f79ebf4de63..ded122c1ae2 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1713,17 +1713,9 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return false; } - connector = &intel_output->base; - - drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, - DRM_MODE_CONNECTOR_Unknown); - drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); intel_output->type = INTEL_OUTPUT_SDVO; - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - /* setup the DDC bus. */ if (output_device == SDVOB) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); @@ -1731,7 +1723,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); if (!i2cbus) - goto err_connector; + goto err_inteloutput; sdvo_priv->i2c_bus = i2cbus; @@ -1747,7 +1739,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->i2c_bus = i2cbus; intel_output->dev_priv = sdvo_priv; - /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { @@ -1768,7 +1759,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TMDS; connector_type = DRM_MODE_CONNECTOR_DVID; @@ -1786,7 +1776,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0) { sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TVDAC; connector_type = DRM_MODE_CONNECTOR_SVIDEO; sdvo_priv->is_tv = true; @@ -1795,21 +1784,18 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1817,7 +1803,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1836,9 +1821,16 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) goto err_i2c; } + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); - connector->connector_type = connector_type; drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); drm_sysfs_connector_add(connector); @@ -1876,8 +1868,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) err_i2c: intel_i2c_destroy(intel_output->i2c_bus); -err_connector: - drm_connector_cleanup(connector); +err_inteloutput: kfree(intel_output); return false; -- cgit v1.2.3-18-g5258 From 619ac3b75a1e9b2df66857f6a0fb466f1da5fa9e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 18 May 2009 16:12:46 +0800 Subject: drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. Previously, we would set the control bus switch before calls were made to request EDID information over DDC. But recently the DDC code started doing multiple I2C transfers to get the EDID extensions as well. This tripped up SDVO, because the control bus switch is only in effect until the next STOP after a START. By doing our own algo, we can wrap each i2c transaction on the DDC I2C bus with the control bus switch it requires. freedesktop.org bug #21042 Signed-off-by: Ma Ling [anholt: Hand application for conflict, fixed error path] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 67 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index ded122c1ae2..f3ef6bfd8ff 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1402,10 +1402,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); #if 0 @@ -1601,6 +1599,9 @@ static void intel_sdvo_destroy(struct drm_connector *connector) if (intel_output->i2c_bus) intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); kfree(intel_output); @@ -1697,12 +1698,56 @@ intel_sdvo_get_digital_encoding_mode(struct intel_output *output) return true; } +static struct intel_output * +intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) +{ + struct drm_device *dev = chan->drm_dev; + struct drm_connector *connector; + struct intel_output *intel_output = NULL; + + list_for_each_entry(connector, + &dev->mode_config.connector_list, head) { + if (to_intel_output(connector)->ddc_bus == chan) { + intel_output = to_intel_output(connector); + break; + } + } + return intel_output; +} + +static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct i2c_algo_bit_data *algo_data; + struct i2c_algorithm *algo; + + algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; + intel_output = + intel_sdvo_chan_to_intel_output( + (struct intel_i2c_chan *)(algo_data->data)); + if (intel_output == NULL) + return -EINVAL; + + sdvo_priv = intel_output->dev_priv; + algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + return algo->master_xfer(i2c_adap, msgs, num); +} + +static struct i2c_algorithm intel_sdvo_i2c_bit_algo = { + .master_xfer = intel_sdvo_master_xfer, +}; + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct intel_i2c_chan *i2cbus = NULL; + struct intel_i2c_chan *ddcbus = NULL; int connector_type; u8 ch[0x40]; int i; @@ -1748,6 +1793,20 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* setup the DDC bus. */ + if (output_device == SDVOB) + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + else + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + + if (ddcbus == NULL) + goto err_i2c; + + intel_sdvo_i2c_bit_algo.functionality = + intel_output->i2c_bus->adapter.algo->functionality; + ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; + intel_output->ddc_bus = ddcbus; + /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); @@ -1862,11 +1921,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) sdvo_priv->caps.output_flags & (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); - intel_output->ddc_bus = i2cbus; - return true; err_i2c: + if (ddcbus != NULL) + intel_i2c_destroy(intel_output->ddc_bus); intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); -- cgit v1.2.3-18-g5258 From e1defc4ff0cf57aca6c5e3ff99fa503f5943c1f1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:49 -0400 Subject: block: Do away with the notion of hardsect_size Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 6 +++--- drivers/block/cpqarray.c | 4 ++-- drivers/block/hd.c | 2 +- drivers/block/mg_disk.c | 2 +- drivers/block/pktcdvd.c | 2 +- drivers/block/ps3disk.c | 2 +- drivers/block/ub.c | 6 +++--- drivers/block/virtio_blk.c | 2 +- drivers/block/xen-blkfront.c | 2 +- drivers/block/xsysace.c | 2 +- drivers/cdrom/gdrom.c | 2 +- drivers/cdrom/viocd.c | 4 ++-- drivers/char/raw.c | 2 +- drivers/ide/ide-cd.c | 12 ++++++------ drivers/md/bitmap.c | 4 ++-- drivers/md/dm-exception-store.c | 2 +- drivers/md/dm-log.c | 3 ++- drivers/md/dm-snap-persistent.c | 2 +- drivers/md/dm-table.c | 12 +++++++----- drivers/md/md.c | 2 +- drivers/memstick/core/mspro_block.c | 2 +- drivers/message/i2o/i2o_block.c | 5 +++-- drivers/mmc/card/block.c | 2 +- drivers/mtd/mtd_blkdevs.c | 2 +- drivers/s390/block/dasd.c | 2 +- drivers/s390/block/dcssblk.c | 2 +- drivers/s390/block/xpram.c | 2 +- drivers/s390/char/tape_block.c | 2 +- drivers/scsi/sd.c | 2 +- drivers/scsi/sr.c | 2 +- 30 files changed, 51 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e714e7cce6f..94474f5f8bc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1389,8 +1389,8 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, disk->queue->queuedata = h; - blk_queue_hardsect_size(disk->queue, - h->drv[drv_index].block_size); + blk_queue_logical_block_size(disk->queue, + h->drv[drv_index].block_size); /* Make sure all queue data is written out before */ /* setting h->drv[drv_index].queue, as setting this */ @@ -2298,7 +2298,7 @@ static int cciss_revalidate(struct gendisk *disk) cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv); - blk_queue_hardsect_size(drv->queue, drv->block_size); + blk_queue_logical_block_size(drv->queue, drv->block_size); set_capacity(disk, drv->nr_blocks); kfree(inq_buff); diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index a02dcfc00f1..44fa2018f6b 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -474,7 +474,7 @@ static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev) disk->fops = &ida_fops; if (j && !drv->nr_blks) continue; - blk_queue_hardsect_size(hba[i]->queue, drv->blk_size); + blk_queue_logical_block_size(hba[i]->queue, drv->blk_size); set_capacity(disk, drv->nr_blks); disk->queue = hba[i]->queue; disk->private_data = drv; @@ -1546,7 +1546,7 @@ static int revalidate_allvol(ctlr_info_t *host) drv_info_t *drv = &host->drv[i]; if (i && !drv->nr_blks) continue; - blk_queue_hardsect_size(host->queue, drv->blk_size); + blk_queue_logical_block_size(host->queue, drv->blk_size); set_capacity(disk, drv->nr_blks); disk->queue = host->queue; disk->private_data = drv; diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 961de56d00a..f65b3f369eb 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -724,7 +724,7 @@ static int __init hd_init(void) blk_queue_max_sectors(hd_queue, 255); init_timer(&device_timer); device_timer.function = hd_times_out; - blk_queue_hardsect_size(hd_queue, 512); + blk_queue_logical_block_size(hd_queue, 512); if (!NR_HD) { /* diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index c0cd0a03f69..60de5a01e71 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -996,7 +996,7 @@ static int mg_probe(struct platform_device *plat_dev) goto probe_err_6; } blk_queue_max_sectors(host->breq, MG_MAX_SECTS); - blk_queue_hardsect_size(host->breq, MG_SECTOR_SIZE); + blk_queue_logical_block_size(host->breq, MG_SECTOR_SIZE); init_timer(&host->timer); host->timer.function = mg_times_out; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index dc7a8c352da..293f5858921 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2657,7 +2657,7 @@ static void pkt_init_queue(struct pktcdvd_device *pd) struct request_queue *q = pd->disk->queue; blk_queue_make_request(q, pkt_make_request); - blk_queue_hardsect_size(q, CD_FRAMESIZE); + blk_queue_logical_block_size(q, CD_FRAMESIZE); blk_queue_max_sectors(q, PACKET_MAX_SECTORS); blk_queue_merge_bvec(q, pkt_merge_bvec); q->queuedata = pd; diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index 338cee4cc0b..aaeeb544228 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -477,7 +477,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev) blk_queue_max_sectors(queue, dev->bounce_size >> 9); blk_queue_segment_boundary(queue, -1UL); blk_queue_dma_alignment(queue, dev->blk_size-1); - blk_queue_hardsect_size(queue, dev->blk_size); + blk_queue_logical_block_size(queue, dev->blk_size); blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH, ps3disk_prepare_flush); diff --git a/drivers/block/ub.c b/drivers/block/ub.c index e67bbae9547..cc54473b8e7 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -722,7 +722,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, /* * build the command * - * The call to blk_queue_hardsect_size() guarantees that request + * The call to blk_queue_logical_block_size() guarantees that request * is aligned, but it is given in terms of 512 byte units, always. */ block = blk_rq_pos(rq) >> lun->capacity.bshift; @@ -1749,7 +1749,7 @@ static int ub_bd_revalidate(struct gendisk *disk) ub_revalidate(lun->udev, lun); /* XXX Support sector size switching like in sr.c */ - blk_queue_hardsect_size(disk->queue, lun->capacity.bsize); + blk_queue_logical_block_size(disk->queue, lun->capacity.bsize); set_capacity(disk, lun->capacity.nsec); // set_disk_ro(sdkp->disk, lun->readonly); @@ -2324,7 +2324,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum) blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ blk_queue_max_sectors(q, UB_MAX_SECTORS); - blk_queue_hardsect_size(q, lun->capacity.bsize); + blk_queue_logical_block_size(q, lun->capacity.bsize); lun->disk = disk; q->queuedata = lun; diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 511d4ae2d17..c4845b16946 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -347,7 +347,7 @@ static int virtblk_probe(struct virtio_device *vdev) offsetof(struct virtio_blk_config, blk_size), &blk_size); if (!err) - blk_queue_hardsect_size(vblk->disk->queue, blk_size); + blk_queue_logical_block_size(vblk->disk->queue, blk_size); add_disk(vblk->disk); return 0; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 132120ae4bd..c1996829d5e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -344,7 +344,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq); /* Hard sector size and max sectors impersonate the equiv. hardware. */ - blk_queue_hardsect_size(rq, sector_size); + blk_queue_logical_block_size(rq, sector_size); blk_queue_max_sectors(rq, 512); /* Each segment in a request is up to an aligned page in size. */ diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index 3a4397edab7..f08491a3a81 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -984,7 +984,7 @@ static int __devinit ace_setup(struct ace_device *ace) ace->queue = blk_init_queue(ace_request, &ace->lock); if (ace->queue == NULL) goto err_blk_initq; - blk_queue_hardsect_size(ace->queue, 512); + blk_queue_logical_block_size(ace->queue, 512); /* * Allocate and initialize GD structure diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 1e366ad8f68..b5621f27c4b 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -739,7 +739,7 @@ static void __devinit probe_gdrom_setupdisk(void) static int __devinit probe_gdrom_setupqueue(void) { - blk_queue_hardsect_size(gd.gdrom_rq, GDROM_HARD_SECTOR); + blk_queue_logical_block_size(gd.gdrom_rq, GDROM_HARD_SECTOR); /* using DMA so memory will need to be contiguous */ blk_queue_max_hw_segments(gd.gdrom_rq, 1); /* set a large max size to get most from DMA */ diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index f177c2d4017..0fff646cc2f 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -469,8 +469,8 @@ static void vio_handle_cd_event(struct HvLpEvent *event) case viocdopen: if (event->xRc == 0) { di = &viocd_diskinfo[bevent->disk]; - blk_queue_hardsect_size(di->viocd_disk->queue, - bevent->block_size); + blk_queue_logical_block_size(di->viocd_disk->queue, + bevent->block_size); set_capacity(di->viocd_disk, bevent->media_size * bevent->block_size / 512); diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 20d90e6a6e5..db32f0e4c7d 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -71,7 +71,7 @@ static int raw_open(struct inode *inode, struct file *filp) err = bd_claim(bdev, raw_open); if (err) goto out1; - err = set_blocksize(bdev, bdev_hardsect_size(bdev)); + err = set_blocksize(bdev, bdev_logical_block_size(bdev)); if (err) goto out2; filp->f_flags |= O_DIRECT; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 1799328decf..424140c6c40 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -182,7 +182,7 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, (sense->information[2] << 8) | (sense->information[3]); - if (drive->queue->hardsect_size == 2048) + if (queue_logical_block_size(drive->queue) == 2048) /* device sector size is 2K */ sector <<= 2; @@ -737,7 +737,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) struct request_queue *q = drive->queue; int write = rq_data_dir(rq) == WRITE; unsigned short sectors_per_frame = - queue_hardsect_size(q) >> SECTOR_BITS; + queue_logical_block_size(q) >> SECTOR_BITS; ide_debug_log(IDE_DBG_RQ, "rq->cmd[0]: 0x%x, rq->cmd_flags: 0x%x, " "secs_per_frame: %u", @@ -1021,8 +1021,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; - blk_queue_hardsect_size(drive->queue, - sectors_per_frame << SECTOR_BITS); + blk_queue_logical_block_size(drive->queue, + sectors_per_frame << SECTOR_BITS); /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, @@ -1338,7 +1338,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive) /* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { - int hard_sect = queue_hardsect_size(q); + int hard_sect = queue_logical_block_size(q); long block = (long)blk_rq_pos(rq) / (hard_sect >> 9); unsigned long blocks = blk_rq_sectors(rq) / (hard_sect >> 9); @@ -1543,7 +1543,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) nslots = ide_cdrom_probe_capabilities(drive); - blk_queue_hardsect_size(q, CD_FRAMESIZE); + blk_queue_logical_block_size(q, CD_FRAMESIZE); if (ide_cdrom_register(drive, nslots)) { printk(KERN_ERR PFX "%s: %s failed to register device with the" diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 47c68bc75a1..06b0ded1ce2 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -232,7 +232,7 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, target = rdev->sb_start + offset + index * (PAGE_SIZE/512); if (sync_page_io(rdev->bdev, target, - roundup(size, bdev_hardsect_size(rdev->bdev)), + roundup(size, bdev_logical_block_size(rdev->bdev)), page, READ)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will @@ -287,7 +287,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) int size = PAGE_SIZE; if (page->index == bitmap->file_pages-1) size = roundup(bitmap->last_page_size, - bdev_hardsect_size(rdev->bdev)); + bdev_logical_block_size(rdev->bdev)); /* Just make sure we aren't corrupting data or * metadata */ diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index a2e26c24214..75d8081a904 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -178,7 +178,7 @@ static int set_chunk_size(struct dm_exception_store *store, } /* Validate the chunk size against the device block size */ - if (chunk_size_ulong % (bdev_hardsect_size(store->cow->bdev) >> 9)) { + if (chunk_size_ulong % (bdev_logical_block_size(store->cow->bdev) >> 9)) { *error = "Chunk size is not a multiple of device blocksize"; return -EINVAL; } diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index be233bc4d91..6fa8ccf91c7 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -413,7 +413,8 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti, * Buffer holds both header and bitset. */ buf_size = dm_round_up((LOG_OFFSET << SECTOR_SHIFT) + - bitset_size, ti->limits.hardsect_size); + bitset_size, + ti->limits.logical_block_size); if (buf_size > dev->bdev->bd_inode->i_size) { DMWARN("log device %s too small: need %llu bytes", diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index e75c6dd76a9..2662a41337e 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -282,7 +282,7 @@ static int read_header(struct pstore *ps, int *new_snapshot) */ if (!ps->store->chunk_size) { ps->store->chunk_size = max(DM_CHUNK_SIZE_DEFAULT_SECTORS, - bdev_hardsect_size(ps->store->cow->bdev) >> 9); + bdev_logical_block_size(ps->store->cow->bdev) >> 9); ps->store->chunk_mask = ps->store->chunk_size - 1; ps->store->chunk_shift = ffs(ps->store->chunk_size) - 1; chunk_size_supplied = 0; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 429b50b975d..65e2d975985 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -108,7 +108,8 @@ static void combine_restrictions_low(struct io_restrictions *lhs, lhs->max_hw_segments = min_not_zero(lhs->max_hw_segments, rhs->max_hw_segments); - lhs->hardsect_size = max(lhs->hardsect_size, rhs->hardsect_size); + lhs->logical_block_size = max(lhs->logical_block_size, + rhs->logical_block_size); lhs->max_segment_size = min_not_zero(lhs->max_segment_size, rhs->max_segment_size); @@ -529,7 +530,8 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) rs->max_hw_segments = min_not_zero(rs->max_hw_segments, q->max_hw_segments); - rs->hardsect_size = max(rs->hardsect_size, q->hardsect_size); + rs->logical_block_size = max(rs->logical_block_size, + queue_logical_block_size(q)); rs->max_segment_size = min_not_zero(rs->max_segment_size, q->max_segment_size); @@ -683,8 +685,8 @@ static void check_for_valid_limits(struct io_restrictions *rs) rs->max_phys_segments = MAX_PHYS_SEGMENTS; if (!rs->max_hw_segments) rs->max_hw_segments = MAX_HW_SEGMENTS; - if (!rs->hardsect_size) - rs->hardsect_size = 1 << SECTOR_SHIFT; + if (!rs->logical_block_size) + rs->logical_block_size = 1 << SECTOR_SHIFT; if (!rs->max_segment_size) rs->max_segment_size = MAX_SEGMENT_SIZE; if (!rs->seg_boundary_mask) @@ -914,7 +916,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) blk_queue_max_sectors(q, t->limits.max_sectors); q->max_phys_segments = t->limits.max_phys_segments; q->max_hw_segments = t->limits.max_hw_segments; - q->hardsect_size = t->limits.hardsect_size; + q->logical_block_size = t->limits.logical_block_size; q->max_segment_size = t->limits.max_segment_size; q->max_hw_sectors = t->limits.max_hw_sectors; q->seg_boundary_mask = t->limits.seg_boundary_mask; diff --git a/drivers/md/md.c b/drivers/md/md.c index fccc8343a25..4cbc19f5c30 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1202,7 +1202,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) atomic_set(&rdev->corrected_errors, le32_to_cpu(sb->cnt_corrected_read)); rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256; - bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1; + bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1; if (rdev->sb_size & bmask) rdev->sb_size = (rdev->sb_size | bmask) + 1; diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index c0bebc6a2f2..7847bbc1440 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -1242,7 +1242,7 @@ static int mspro_block_init_disk(struct memstick_dev *card) sprintf(msb->disk->disk_name, "mspblk%d", disk_id); - blk_queue_hardsect_size(msb->queue, msb->page_size); + blk_queue_logical_block_size(msb->queue, msb->page_size); capacity = be16_to_cpu(sys_info->user_block_count); capacity *= be16_to_cpu(sys_info->block_size); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 6573ef4408f..335d4c78a77 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -794,8 +794,9 @@ static int i2o_block_transfer(struct request *req) if (c->adaptec) { u8 cmd[10]; u32 scsi_flags; - u16 hwsec = queue_hardsect_size(req->q) >> KERNEL_SECTOR_SHIFT; + u16 hwsec; + hwsec = queue_logical_block_size(req->q) >> KERNEL_SECTOR_SHIFT; memset(cmd, 0, 10); sgl_offset = SGL_OFFSET_12; @@ -1078,7 +1079,7 @@ static int i2o_block_probe(struct device *dev) */ if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) || !i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { - blk_queue_hardsect_size(queue, le32_to_cpu(blocksize)); + blk_queue_logical_block_size(queue, le32_to_cpu(blocksize)); } else osm_warn("unable to get blocksize of %s\n", gd->disk_name); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index c5df8654645..98ffc41eaf2 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -521,7 +521,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) sprintf(md->disk->disk_name, "mmcblk%d", devidx); - blk_queue_hardsect_size(md->queue.queue, 512); + blk_queue_logical_block_size(md->queue.queue, 512); if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { /* diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 502622f628b..aaac3b6800b 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -378,7 +378,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr) } tr->blkcore_priv->rq->queuedata = tr; - blk_queue_hardsect_size(tr->blkcore_priv->rq, tr->blksize); + blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize); if (tr->discard) blk_queue_set_discard(tr->blkcore_priv->rq, blktrans_discard_request); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index e64f62d5e0f..27a1be0cd4d 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1990,7 +1990,7 @@ static void dasd_setup_queue(struct dasd_block *block) { int max; - blk_queue_hardsect_size(block->request_queue, block->bp_block); + blk_queue_logical_block_size(block->request_queue, block->bp_block); max = block->base->discipline->max_blocks << block->s2b_shift; blk_queue_max_sectors(block->request_queue, max); blk_queue_max_phys_segments(block->request_queue, -1L); diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index cfdcf1aed33..a4c7ffcd998 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -602,7 +602,7 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char dev_info->gd->private_data = dev_info; dev_info->gd->driverfs_dev = &dev_info->dev; blk_queue_make_request(dev_info->dcssblk_queue, dcssblk_make_request); - blk_queue_hardsect_size(dev_info->dcssblk_queue, 4096); + blk_queue_logical_block_size(dev_info->dcssblk_queue, 4096); seg_byte_size = (dev_info->end - dev_info->start + 1); set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 76814f3e898..0ae0c83ef87 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -343,7 +343,7 @@ static int __init xpram_setup_blkdev(void) goto out; } blk_queue_make_request(xpram_queues[i], xpram_make_request); - blk_queue_hardsect_size(xpram_queues[i], 4096); + blk_queue_logical_block_size(xpram_queues[i], 4096); } /* diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 1e796767598..47ff695255e 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -222,7 +222,7 @@ tapeblock_setup_device(struct tape_device * device) if (rc) goto cleanup_queue; - blk_queue_hardsect_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE); + blk_queue_logical_block_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE); blk_queue_max_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC); blk_queue_max_phys_segments(blkdat->request_queue, -1L); blk_queue_max_hw_segments(blkdat->request_queue, -1L); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 40d2860f235..bcf3bd40bbd 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1510,7 +1510,7 @@ got_data: */ sector_size = 512; } - blk_queue_hardsect_size(sdp->request_queue, sector_size); + blk_queue_logical_block_size(sdp->request_queue, sector_size); { char cap_str_2[10], cap_str_10[10]; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index fddba53c7fe..cd350dfc121 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -727,7 +727,7 @@ static void get_sectorsize(struct scsi_cd *cd) } queue = cd->device->request_queue; - blk_queue_hardsect_size(queue, sector_size); + blk_queue_logical_block_size(queue, sector_size); return; } -- cgit v1.2.3-18-g5258 From ae03bf639a5027d27270123f5f6e3ee6a412781d Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:50 -0400 Subject: block: Use accessor functions for queue limits Convert all external users of queue limits to using wrapper functions instead of poking the request queue variables directly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/block/pktcdvd.c | 6 ++++-- drivers/cdrom/cdrom.c | 4 ++-- drivers/md/dm-table.c | 28 ++++++++++++++-------------- drivers/md/linear.c | 2 +- drivers/md/multipath.c | 4 ++-- drivers/md/raid0.c | 2 +- drivers/md/raid1.c | 4 ++-- drivers/md/raid10.c | 8 ++++---- drivers/md/raid5.c | 4 ++-- drivers/scsi/sg.c | 15 ++++++++------- drivers/scsi/st.c | 4 ++-- drivers/usb/storage/scsiglue.c | 4 ++-- 12 files changed, 44 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 293f5858921..d57f1175948 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -991,13 +991,15 @@ static void pkt_iosched_process_queue(struct pktcdvd_device *pd) */ static int pkt_set_segment_merging(struct pktcdvd_device *pd, struct request_queue *q) { - if ((pd->settings.size << 9) / CD_FRAMESIZE <= q->max_phys_segments) { + if ((pd->settings.size << 9) / CD_FRAMESIZE + <= queue_max_phys_segments(q)) { /* * The cdrom device can handle one segment/frame */ clear_bit(PACKET_MERGE_SEGS, &pd->flags); return 0; - } else if ((pd->settings.size << 9) / PAGE_SIZE <= q->max_phys_segments) { + } else if ((pd->settings.size << 9) / PAGE_SIZE + <= queue_max_phys_segments(q)) { /* * We can handle this case at the expense of some extra memory * copies during write operations diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index cceace61ef2..71d1b9bab70 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -2101,8 +2101,8 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, nr = nframes; if (cdi->cdda_method == CDDA_BPC_SINGLE) nr = 1; - if (nr * CD_FRAMESIZE_RAW > (q->max_sectors << 9)) - nr = (q->max_sectors << 9) / CD_FRAMESIZE_RAW; + if (nr * CD_FRAMESIZE_RAW > (queue_max_sectors(q) << 9)) + nr = (queue_max_sectors(q) << 9) / CD_FRAMESIZE_RAW; len = nr * CD_FRAMESIZE_RAW; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 65e2d975985..e9a73bb242b 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -510,7 +510,7 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) * combine_restrictions_low() */ rs->max_sectors = - min_not_zero(rs->max_sectors, q->max_sectors); + min_not_zero(rs->max_sectors, queue_max_sectors(q)); /* * Check if merge fn is supported. @@ -525,25 +525,25 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) rs->max_phys_segments = min_not_zero(rs->max_phys_segments, - q->max_phys_segments); + queue_max_phys_segments(q)); rs->max_hw_segments = - min_not_zero(rs->max_hw_segments, q->max_hw_segments); + min_not_zero(rs->max_hw_segments, queue_max_hw_segments(q)); rs->logical_block_size = max(rs->logical_block_size, queue_logical_block_size(q)); rs->max_segment_size = - min_not_zero(rs->max_segment_size, q->max_segment_size); + min_not_zero(rs->max_segment_size, queue_max_segment_size(q)); rs->max_hw_sectors = - min_not_zero(rs->max_hw_sectors, q->max_hw_sectors); + min_not_zero(rs->max_hw_sectors, queue_max_hw_sectors(q)); rs->seg_boundary_mask = min_not_zero(rs->seg_boundary_mask, - q->seg_boundary_mask); + queue_segment_boundary(q)); - rs->bounce_pfn = min_not_zero(rs->bounce_pfn, q->bounce_pfn); + rs->bounce_pfn = min_not_zero(rs->bounce_pfn, queue_bounce_pfn(q)); rs->no_cluster |= !test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); } @@ -914,13 +914,13 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) * restrictions. */ blk_queue_max_sectors(q, t->limits.max_sectors); - q->max_phys_segments = t->limits.max_phys_segments; - q->max_hw_segments = t->limits.max_hw_segments; - q->logical_block_size = t->limits.logical_block_size; - q->max_segment_size = t->limits.max_segment_size; - q->max_hw_sectors = t->limits.max_hw_sectors; - q->seg_boundary_mask = t->limits.seg_boundary_mask; - q->bounce_pfn = t->limits.bounce_pfn; + blk_queue_max_phys_segments(q, t->limits.max_phys_segments); + blk_queue_max_hw_segments(q, t->limits.max_hw_segments); + blk_queue_logical_block_size(q, t->limits.logical_block_size); + blk_queue_max_segment_size(q, t->limits.max_segment_size); + blk_queue_max_hw_sectors(q, t->limits.max_hw_sectors); + blk_queue_segment_boundary(q, t->limits.seg_boundary_mask); + blk_queue_bounce_limit(q, t->limits.bounce_pfn); if (t->limits.no_cluster) queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q); diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 7a36e38393a..64f1f3e046e 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -146,7 +146,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) * a one page request is never in violation. */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); disk->num_sectors = rdev->sectors; diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 41ced0cbe82..4ee31aa13c4 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -303,7 +303,7 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) * merge_bvec_fn will be involved in multipath.) */ if (q->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(q) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); conf->working_disks++; @@ -467,7 +467,7 @@ static int multipath_run (mddev_t *mddev) * violating it, not that we ever expect a device with * a merge_bvec_fn to be involved in multipath */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); if (!test_bit(Faulty, &rdev->flags)) diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index c08d7559be5..925507e7d67 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -144,7 +144,7 @@ static int create_strip_zones (mddev_t *mddev) */ if (rdev1->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); if (!smallest || (rdev1->sectors < smallest->sectors)) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 36df9109cde..e23758b4a34 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1130,7 +1130,7 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) * a one page request is never in violation. */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); p->head_position = 0; @@ -1996,7 +1996,7 @@ static int run(mddev_t *mddev) * a one page request is never in violation. */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); disk->head_position = 0; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 499620afb44..750550c1166 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1158,8 +1158,8 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) * a one page request is never in violation. */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) - mddev->queue->max_sectors = (PAGE_SIZE>>9); + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) + blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); p->head_position = 0; rdev->raid_disk = mirror; @@ -2145,8 +2145,8 @@ static int run(mddev_t *mddev) * a one page request is never in violation. */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && - mddev->queue->max_sectors > (PAGE_SIZE>>9)) - mddev->queue->max_sectors = (PAGE_SIZE>>9); + queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) + blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); disk->head_position = 0; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4616bc3a6e7..7970dc8c522 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3463,10 +3463,10 @@ static int bio_fits_rdev(struct bio *bi) { struct request_queue *q = bdev_get_queue(bi->bi_bdev); - if ((bi->bi_size>>9) > q->max_sectors) + if ((bi->bi_size>>9) > queue_max_sectors(q)) return 0; blk_recount_segments(q, bi); - if (bi->bi_phys_segments > q->max_phys_segments) + if (bi->bi_phys_segments > queue_max_phys_segments(q)) return 0; if (q->merge_bvec_fn) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 0fc2c0ae769..9bd407fa98e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -289,8 +289,8 @@ sg_open(struct inode *inode, struct file *filp) if (list_empty(&sdp->sfds)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; - sdp->sg_tablesize = min(q->max_hw_segments, - q->max_phys_segments); + sdp->sg_tablesize = min(queue_max_hw_segments(q), + queue_max_phys_segments(q)); } if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; @@ -909,7 +909,7 @@ sg_ioctl(struct inode *inode, struct file *filp, if (val < 0) return -EINVAL; val = min_t(int, val, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); if (val != sfp->reserve.bufflen) { if (sg_res_in_use(sfp) || sfp->mmap_called) return -EBUSY; @@ -919,7 +919,7 @@ sg_ioctl(struct inode *inode, struct file *filp, return 0; case SG_GET_RESERVED_SIZE: val = min_t(int, sfp->reserve.bufflen, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); return put_user(val, ip); case SG_SET_COMMAND_Q: result = get_user(val, ip); @@ -1059,7 +1059,7 @@ sg_ioctl(struct inode *inode, struct file *filp, return -ENODEV; return scsi_ioctl(sdp->device, cmd_in, p); case BLKSECTGET: - return put_user(sdp->device->request_queue->max_sectors * 512, + return put_user(queue_max_sectors(sdp->device->request_queue) * 512, ip); case BLKTRACESETUP: return blk_trace_setup(sdp->device->request_queue, @@ -1377,7 +1377,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) sdp->device = scsidp; INIT_LIST_HEAD(&sdp->sfds); init_waitqueue_head(&sdp->o_excl_wait); - sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); + sdp->sg_tablesize = min(queue_max_hw_segments(q), + queue_max_phys_segments(q)); sdp->index = k; kref_init(&sdp->d_ref); @@ -2055,7 +2056,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sg_big_buff = def_reserved_size; bufflen = min_t(int, sg_big_buff, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); sg_build_reserve(sfp, bufflen); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n", sfp->reserve.bufflen, sfp->reserve.k_use_sg)); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 8681b708344..89bd438e1fe 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3983,8 +3983,8 @@ static int st_probe(struct device *dev) return -ENODEV; } - i = min(SDp->request_queue->max_hw_segments, - SDp->request_queue->max_phys_segments); + i = min(queue_max_hw_segments(SDp->request_queue), + queue_max_phys_segments(SDp->request_queue)); if (st_max_sg_segs < i) i = st_max_sg_segs; buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 4ca3b586064..cfa26d56ce6 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -132,7 +132,7 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; - if (sdev->request_queue->max_sectors > max_sectors) + if (queue_max_sectors(sdev->request_queue) > max_sectors) blk_queue_max_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { @@ -483,7 +483,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att { struct scsi_device *sdev = to_scsi_device(dev); - return sprintf(buf, "%u\n", sdev->request_queue->max_sectors); + return sprintf(buf, "%u\n", queue_max_sectors(sdev->request_queue)); } /* Input routine for the sysfs max_sectors file */ -- cgit v1.2.3-18-g5258 From 95caa0a9bdaf93607bd0cc8932f53112496f2f22 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 22 May 2009 21:30:39 -0300 Subject: icom: fix rmmod crash Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6579e2be1dd..a461b3b2c72 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); iounmap(icom_adapter->base_addr); - icom_free_adapter(icom_adapter); pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); } static void icom_kref_release(struct kref *kref) -- cgit v1.2.3-18-g5258 From 3b77f777b8f1c001b63e317c4ce317292ff0ff94 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sat, 23 May 2009 08:23:16 +0200 Subject: ide-disk: fix missing max_sectors accessor function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The recent move to accessor functions for querying queue limits missed an entry in ide-disk.c: drivers/ide/ide-disk.c: In function ‘ide_disk_setup’: drivers/ide/ide-disk.c:642: error: ‘struct request_queue’ has no member named ‘max_sectors’ Fix it. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/ide/ide-disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index ad18e14043c..c6f7fcfb9d6 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -639,7 +639,7 @@ static void ide_disk_setup(ide_drive_t *drive) } printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, - q->max_sectors / 2); + queue_max_sectors(q) / 2); if (ata_id_is_ssd(id)) queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); -- cgit v1.2.3-18-g5258 From df391e0eda1e678add56a8e34226edf05d89af6a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 23 May 2009 09:51:20 -0700 Subject: Input: multitouch - add tracking ID to the protocol MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg Tested-by: Stéphane Chatty Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index e54e002665b..5d445f48789 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -42,6 +42,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_POSITION_Y, ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, + ABS_MT_TRACKING_ID, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; -- cgit v1.2.3-18-g5258 From 32bdfac5462d777f35b00838893c4f87baf23efe Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 24 May 2009 21:15:07 +0200 Subject: PM: Do not hold dpm_list_mtx while disabling/enabling nonboot CPUs We shouldn't hold dpm_list_mtx while executing [disable|enable]_nonboot_cpus(), because theoretically this may lead to a deadlock as shown by the following example (provided by Johannes Berg): CPU 3 CPU 2 CPU 1 suspend/hibernate something: rtnl_lock() device_pm_lock() -> mutex_lock(&dpm_list_mtx) mutex_lock(&dpm_list_mtx) linkwatch_work -> rtnl_lock() disable_nonboot_cpus() -> flush CPU 3 workqueue Fortunately, device drivers are supposed to stop any activities that might lead to the registration of new device objects way before disable_nonboot_cpus() is called, so it shouldn't be necessary to hold dpm_list_mtx over the entire late part of device suspend and early part of device resume. Thus, during the late suspend and the early resume of devices acquire dpm_list_mtx only when dpm_list is going to be traversed and release it right after that. This patch is reported to fix the regressions tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13245. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Reported-by: Miles Lane Tested-by: Ming Lei --- drivers/base/power/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 69b4ddb7de3..3e4bc699bc0 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -357,6 +357,7 @@ static void dpm_power_up(pm_message_t state) { struct device *dev; + mutex_lock(&dpm_list_mtx); list_for_each_entry(dev, &dpm_list, power.entry) if (dev->power.status > DPM_OFF) { int error; @@ -366,6 +367,7 @@ static void dpm_power_up(pm_message_t state) if (error) pm_dev_err(dev, state, " early", error); } + mutex_unlock(&dpm_list_mtx); } /** @@ -614,6 +616,7 @@ int device_power_down(pm_message_t state) int error = 0; suspend_device_irqs(); + mutex_lock(&dpm_list_mtx); list_for_each_entry_reverse(dev, &dpm_list, power.entry) { error = suspend_device_noirq(dev, state); if (error) { @@ -622,6 +625,7 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } + mutex_unlock(&dpm_list_mtx); if (error) device_power_up(resume_event(state)); return error; -- cgit v1.2.3-18-g5258 From 4e2fd555199977c5994d1a4d2d3b8761b20ca4c7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 25 May 2009 00:42:34 -0700 Subject: gianfar: fix BUG under load after introduction of skb recycling Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche Tested-by: Michael Guntsche Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b2c49679bba..a0519184e54 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1885,8 +1885,17 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - else if (skb) + else if (skb) { + /* + * We need to reset ->data to what it + * was before gfar_new_skb() re-aligned + * it to an RXBUF_ALIGNMENT boundary + * before we put the skb back on the + * recycle list. + */ + skb->data = skb->head + NET_SKB_PAD; __skb_queue_head(&priv->rx_recycle, skb); + } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v1.2.3-18-g5258 From 62e1e389f87a8839ad83b08c44691d1df8320846 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:40:59 +1000 Subject: md: always update level / chunk_size / layout when writing v1.x metadata. We previously didn't update these fields when writing the metadata because they could never change. They can now, so we better write them. v0.90 metadata always updated these fields. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index fccc8343a25..aa79d55875f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1375,6 +1375,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->raid_disks = cpu_to_le32(mddev->raid_disks); sb->size = cpu_to_le64(mddev->dev_sectors); + sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9); + sb->level = cpu_to_le32(mddev->level); + sb->layout = cpu_to_le32(mddev->layout); if (mddev->bitmap && mddev->bitmap_file == NULL) { sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset); -- cgit v1.2.3-18-g5258 From 2b69c83924396ad1eda36fdd267c9d2f360f5555 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: improve errno return when setting array_size Instead of always returns EINVAL if anything goes wrong when setting the array size, add the option of E2BIG if the size requested is too large. This makes it easier for user-space to be sure what went wrong. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index aa79d55875f..58e0b02a74c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3683,7 +3683,7 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len) if (strict_blocks_to_sectors(buf, §ors) < 0) return -EINVAL; if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors) - return -EINVAL; + return -E2BIG; mddev->external_size = 1; } -- cgit v1.2.3-18-g5258 From be512691036cc989c11d0f418187efbbf14468e6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: bitmap: improve bitmap maintenance code. The code for checking which bits in the bitmap can be cleared has 2 problems: 1/ it repeatedly takes and drops a spinlock, where it would make more sense to just hold on to it most of the time. 2/ it doesn't make use of some opportunities to skip large sections of the bitmap This patch fixes those. It will only affect CPU consumption, not correctness. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 47c68bc75a1..56df1cee8fb 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1097,14 +1097,12 @@ void bitmap_daemon_work(struct bitmap *bitmap) } bitmap->allclean = 1; + spin_lock_irqsave(&bitmap->lock, flags); for (j = 0; j < bitmap->chunks; j++) { bitmap_counter_t *bmc; - spin_lock_irqsave(&bitmap->lock, flags); - if (!bitmap->filemap) { + if (!bitmap->filemap) /* error or shutdown */ - spin_unlock_irqrestore(&bitmap->lock, flags); break; - } page = filemap_get_page(bitmap, j); @@ -1121,6 +1119,8 @@ void bitmap_daemon_work(struct bitmap *bitmap) write_page(bitmap, page, 0); bitmap->allclean = 0; } + spin_lock_irqsave(&bitmap->lock, flags); + j |= (PAGE_BITS - 1); continue; } @@ -1181,9 +1181,10 @@ void bitmap_daemon_work(struct bitmap *bitmap) ext2_clear_bit(file_page_offset(j), paddr); kunmap_atomic(paddr, KM_USER0); } - } - spin_unlock_irqrestore(&bitmap->lock, flags); + } else + j |= PAGE_COUNTER_MASK; } + spin_unlock_irqrestore(&bitmap->lock, flags); /* now sync the final page */ if (lastpage != NULL) { -- cgit v1.2.3-18-g5258 From b6a9ce688f613e2ee5f15e6720e0bb8520efc36e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: md: export 'frozen' resync state through sysfs The md resync engine has a 'frozen' state which ensures that no resync/recovery. This is used to avoid races. Export this state through the 'sync_action' sysfs attribute so that user-space can benefit and also avoid some races. Signed-off-by: NeilBrown --- drivers/md/md.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 58e0b02a74c..384e4f0904c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3306,7 +3306,9 @@ static ssize_t action_show(mddev_t *mddev, char *page) { char *type = "idle"; - if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || + if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) + type = "frozen"; + else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) { if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) type = "reshape"; @@ -3329,7 +3331,12 @@ action_store(mddev_t *mddev, const char *page, size_t len) if (!mddev->pers || !mddev->pers->sync_request) return -EINVAL; - if (cmd_match(page, "idle")) { + if (cmd_match(page, "frozen")) + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + else + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + + if (cmd_match(page, "idle") || cmd_match(page, "frozen")) { if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_unregister_thread(mddev->sync_thread); -- cgit v1.2.3-18-g5258 From 848b3182365fdf5a05bcd5ed949071cac2c894b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:41:08 +1000 Subject: md: raid5: avoid sector values going negative when testing reshape progress. As sector_t in unsigned, we cannot afford to let 'safepos' etc go negative. So replace a -= b; by a -= min(b,a); Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4616bc3a6e7..3c3626d2a1f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= reshape_sectors; + writepos -= min(reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= reshape_sectors; - safepos -= reshape_sectors; + readpos -= min(reshape_sectors, readpos); + safepos -= min(reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. -- cgit v1.2.3-18-g5258 From 7a91ee1f628ef6bfe3f13067c0ddf9db520cb86b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:21 +1000 Subject: md: don't update curr_resync_completed without also updating reshape_position. In order for the metadata to always be consistent, we mustn't updated curr_resync_completed without also updating reshape_position. The reshape code updates both at the same time. However since commit 97e4f42d62badb0f9fbc27c013e89bc1336a03bc the common md_do_sync will sometimes update curr_resync_completed but is not in a position to update reshape_position. So if MD_RECOVERY_RESHAPE is set (indicating that a reshape is happening, so reshape_position might change), don't update curr_resync_completed in md_do_sync, leave it to the per-personality reshape code. Signed-off-by: NeilBrown --- drivers/md/md.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 384e4f0904c..954456532ac 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6362,12 +6362,13 @@ void md_do_sync(mddev_t *mddev) skipped = 0; - if ((mddev->curr_resync > mddev->curr_resync_completed && - (mddev->curr_resync - mddev->curr_resync_completed) - > (max_sectors >> 4)) || - (j - mddev->curr_resync_completed)*2 - >= mddev->resync_max - mddev->curr_resync_completed - ) { + if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + ((mddev->curr_resync > mddev->curr_resync_completed && + (mddev->curr_resync - mddev->curr_resync_completed) + > (max_sectors >> 4)) || + (j - mddev->curr_resync_completed)*2 + >= mddev->resync_max - mddev->curr_resync_completed + )) { /* time to update curr_resync_completed */ blk_unplug(mddev->queue); wait_event(mddev->recovery_wait, -- cgit v1.2.3-18-g5258 From b492b852cd8c99505708152c29a5e09a787af9de Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:36 +1000 Subject: md: don't use locked_ioctl. md has no need for the BKL - it does its own locking. So md_ioctl doesn't need to be a locked_ioctl. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 954456532ac..641b211fe3f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5567,7 +5567,7 @@ static struct block_device_operations md_fops = .owner = THIS_MODULE, .open = md_open, .release = md_release, - .locked_ioctl = md_ioctl, + .ioctl = md_ioctl, .getgeo = md_getgeo, .media_changed = md_media_changed, .revalidate_disk= md_revalidate, -- cgit v1.2.3-18-g5258 From 217cbfa856dc1cbc2890781626c4032d9e3ec59f Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 25 May 2009 22:43:49 -0700 Subject: mac8390: fix regression caused during net_device_ops conversion Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- drivers/net/mac8390.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1fc4602a6ff..a1c25cb4669 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -102,7 +102,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_HP100) += hp100.o diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index 8e884869a05..f26667d5eaa 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit) if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return ERR_PTR(-ENOMEM); @@ -481,10 +481,10 @@ void cleanup_module(void) static const struct net_device_ops mac8390_netdev_ops = { .ndo_open = mac8390_open, .ndo_stop = mac8390_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_multicast_list = __ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, -- cgit v1.2.3-18-g5258 From f11a377b3f4e897d11f0e8d1fc688667e2f19708 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Fri, 22 May 2009 15:29:34 +0000 Subject: r8169: avoid losing MSI interrupts The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow Tested-by: Michael Buesch Signed-off-by: David S. Miller --- drivers/net/r8169.c | 102 +++++++++++++++++++++++++++++----------------------- 1 file changed, 57 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0b6e8c89683..8247a945a1d 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3554,54 +3554,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) int handled = 0; int status; + /* loop handling interrupts until we have no new ones or + * we hit a invalid/hotplug case. + */ status = RTL_R16(IntrStatus); + while (status && status != 0xffff) { + handled = 1; - /* hotplug/major error/no more work/shared irq */ - if ((status == 0xffff) || !status) - goto out; - - handled = 1; + /* Handle all of the error cases first. These will reset + * the chip, so just exit the loop. + */ + if (unlikely(!netif_running(dev))) { + rtl8169_asic_down(ioaddr); + break; + } - if (unlikely(!netif_running(dev))) { - rtl8169_asic_down(ioaddr); - goto out; - } + /* Work around for rx fifo overflow */ + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + break; + } - status &= tp->intr_mask; - RTL_W16(IntrStatus, - (status & RxFIFOOver) ? (status | RxOverflow) : status); + if (unlikely(status & SYSErr)) { + rtl8169_pcierr_interrupt(dev); + break; + } - if (!(status & tp->intr_event)) - goto out; + if (status & LinkChg) + rtl8169_check_link_status(dev, tp, ioaddr); - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - goto out; - } + /* We need to see the lastest version of tp->intr_mask to + * avoid ignoring an MSI interrupt and having to wait for + * another event which may never come. + */ + smp_rmb(); + if (status & tp->intr_mask & tp->napi_event) { + RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); + tp->intr_mask = ~tp->napi_event; + + if (likely(napi_schedule_prep(&tp->napi))) + __napi_schedule(&tp->napi); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); + } + } - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - goto out; + /* We only get a new MSI interrupt when all active irq + * sources on the chip have been acknowledged. So, ack + * everything we've seen and check if new sources have become + * active to avoid blocking all interrupts from the chip. + */ + RTL_W16(IntrStatus, + (status & RxFIFOOver) ? (status | RxOverflow) : status); + status = RTL_R16(IntrStatus); } - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); - - if (status & tp->napi_event) { - RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); - tp->intr_mask = ~tp->napi_event; - - if (likely(napi_schedule_prep(&tp->napi))) - __napi_schedule(&tp->napi); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x in poll\n", - dev->name, status); - } - } -out: return IRQ_RETVAL(handled); } @@ -3617,13 +3627,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete(napi); - tp->intr_mask = 0xffff; - /* - * 20040426: the barrier is not strictly required but the - * behavior of the irq handler could be less predictable - * without it. Btw, the lack of flush for the posted pci - * write is safe - FR + + /* We need for force the visibility of tp->intr_mask + * for other CPUs, as we can loose an MSI interrupt + * and potentially wait for a retransmit timeout if we don't. + * The posted write to IntrMask is safe, as it will + * eventually make it to the chip and we won't loose anything + * until it does. */ + tp->intr_mask = 0xffff; smp_wmb(); RTL_W16(IntrMask, tp->intr_event); } -- cgit v1.2.3-18-g5258 From 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:23:52 -0400 Subject: [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ The patches linked above depend on the following patch to remove circular locking dependency : cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call (the following issue was faced when using cancel_delayed_work_sync() in the timer teardown (which fixes a race). * KOSAKI Motohiro (kosaki.motohiro@jp.fujitsu.com) wrote: > Hi > > my box output following warnings. > it seems regression by commit 7ccc7608b836e58fbacf65ee4f8eefa288e86fac. > > A: work -> do_dbs_timer() -> cpu_policy_rwsem > B: store() -> cpu_policy_rwsem -> cpufreq_governor_dbs() -> work > > Hrm, I think it must be due to my attempt to fix the timer teardown race in ondemand governor mixed with new locking behavior in 2.6.30-rc. The rwlock seems to be taken around the whole call to cpufreq_governor_dbs(), when it should be only taken around accesses to the locked data, and especially *not* around the call to dbs_timer_exit(). Reverting my fix attempt would put the teardown race back in place (replacing the cancel_delayed_work_sync by cancel_delayed_work). Instead, a proper fix would imply modifying this critical section : cpufreq.c: __cpufreq_remove_dev() ... if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); unlock_policy_rwsem_write(cpu); To make sure the __cpufreq_governor() callback is not called with rwsem held. This would allow execution of cancel_delayed_work_sync() without being nested within the rwsem. Applies on top of the 2.6.30-rc5 tree. Required to remove circular dep in teardown of both conservative and ondemande governors so they can use cancel_delayed_work_sync(). CPUFREQ_GOV_STOP does not modify the policy, therefore this locking seemed unneeded. Signed-off-by: Mathieu Desnoyers CC: KOSAKI Motohiro Cc: Greg KH CC: Ingo Molnar CC: "Rafael J. Wysocki" CC: Ben Slusky CC: Chris Wright CC: Andrew Morton Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d270e8eb3e6..47d2ad0ae07 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1070,11 +1070,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif + unlock_policy_rwsem_write(cpu); + if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - unlock_policy_rwsem_write(cpu); - kobject_put(&data->kobj); /* we need to make sure that the underlying kobj is actually -- cgit v1.2.3-18-g5258 From b253d2b2d28ead6fed012feb54694b3d0562839a Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:29:33 -0400 Subject: [CPUFREQ] fix timer teardown in conservative governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (re-send with updated changelog) cpufreq fix timer teardown in conservative governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call The following patch applies to 2.6.30-rc2. Stable kernels have a similar issue which should also be fixed, but the code changed between 2.6.29 and 2.6.30, so this patch only applies to 2.6.30-rc. Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 2ecd95e4ab1..7a74d175287 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -91,6 +91,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -542,7 +545,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, -- cgit v1.2.3-18-g5258 From b14893a62c73af0eca414cfed505b8c09efc613c Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:30:45 -0400 Subject: [CPUFREQ] fix timer teardown in ondemand governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (updated changelog) cpufreq fix timer teardown in ondemand governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. The following patch applies to, at least, 2.6.28.x, 2.6.29.1, 2.6.30-rc2. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_ondemand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 338f428a15b..e741c339df7 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -98,6 +98,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -562,7 +565,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, -- cgit v1.2.3-18-g5258 From e4a5d54f924ea5ce2913d9d0687d034004816465 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Tue, 26 May 2009 11:31:00 +0800 Subject: drm/i915: Add support for VGA load detection (pre-945). Two approaches for VGA detections: hot plug detection for 945G onwards and load pipe detection for Pre-945G. Load pipe detection will get one free pipe, set border color as red and blue, then check CRT status by swf register. This is a sync-up with the 2D driver. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 149 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 147 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 19148c3df63..640f5158eff 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -198,9 +198,142 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) return intel_ddc_probe(intel_output); } +static enum drm_connector_status +intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pipe = intel_crtc->pipe; + uint32_t save_bclrpat; + uint32_t save_vtotal; + uint32_t vtotal, vactive; + uint32_t vsample; + uint32_t vblank, vblank_start, vblank_end; + uint32_t dsl; + uint32_t bclrpat_reg; + uint32_t vtotal_reg; + uint32_t vblank_reg; + uint32_t vsync_reg; + uint32_t pipeconf_reg; + uint32_t pipe_dsl_reg; + uint8_t st00; + enum drm_connector_status status; + + if (pipe == 0) { + bclrpat_reg = BCLRPAT_A; + vtotal_reg = VTOTAL_A; + vblank_reg = VBLANK_A; + vsync_reg = VSYNC_A; + pipeconf_reg = PIPEACONF; + pipe_dsl_reg = PIPEADSL; + } else { + bclrpat_reg = BCLRPAT_B; + vtotal_reg = VTOTAL_B; + vblank_reg = VBLANK_B; + vsync_reg = VSYNC_B; + pipeconf_reg = PIPEBCONF; + pipe_dsl_reg = PIPEBDSL; + } + + save_bclrpat = I915_READ(bclrpat_reg); + save_vtotal = I915_READ(vtotal_reg); + vblank = I915_READ(vblank_reg); + + vtotal = ((save_vtotal >> 16) & 0xfff) + 1; + vactive = (save_vtotal & 0x7ff) + 1; + + vblank_start = (vblank & 0xfff) + 1; + vblank_end = ((vblank >> 16) & 0xfff) + 1; + + /* Set the border color to purple. */ + I915_WRITE(bclrpat_reg, 0x500050); + + if (IS_I9XX(dev)) { + uint32_t pipeconf = I915_READ(pipeconf_reg); + I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER); + /* Wait for next Vblank to substitue + * border color for Color info */ + intel_wait_for_vblank(dev); + st00 = I915_READ8(VGA_MSR_WRITE); + status = ((st00 & (1 << 4)) != 0) ? + connector_status_connected : + connector_status_disconnected; + + I915_WRITE(pipeconf_reg, pipeconf); + } else { + bool restore_vblank = false; + int count, detect; + + /* + * If there isn't any border, add some. + * Yes, this will flicker + */ + if (vblank_start <= vactive && vblank_end >= vtotal) { + uint32_t vsync = I915_READ(vsync_reg); + uint32_t vsync_start = (vsync & 0xffff) + 1; + + vblank_start = vsync_start; + I915_WRITE(vblank_reg, + (vblank_start - 1) | + ((vblank_end - 1) << 16)); + restore_vblank = true; + } + /* sample in the vertical border, selecting the larger one */ + if (vblank_start - vactive >= vtotal - vblank_end) + vsample = (vblank_start + vactive) >> 1; + else + vsample = (vtotal + vblank_end) >> 1; + + /* + * Wait for the border to be displayed + */ + while (I915_READ(pipe_dsl_reg) >= vactive) + ; + while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample) + ; + /* + * Watch ST00 for an entire scanline + */ + detect = 0; + count = 0; + do { + count++; + /* Read the ST00 VGA status register */ + st00 = I915_READ8(VGA_MSR_WRITE); + if (st00 & (1 << 4)) + detect++; + } while ((I915_READ(pipe_dsl_reg) == dsl)); + + /* restore vblank if necessary */ + if (restore_vblank) + I915_WRITE(vblank_reg, vblank); + /* + * If more than 3/4 of the scanline detected a monitor, + * then it is assumed to be present. This works even on i830, + * where there isn't any way to force the border color across + * the screen + */ + status = detect * 4 > count * 3 ? + connector_status_connected : + connector_status_disconnected; + } + + /* Restore previous settings */ + I915_WRITE(bclrpat_reg, save_bclrpat); + + return status; +} + static enum drm_connector_status intel_crt_detect(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc; + int dpms_mode; + enum drm_connector_status status; if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { if (intel_crt_detect_hotplug(connector)) @@ -212,8 +345,20 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto if (intel_crt_detect_ddc(connector)) return connector_status_connected; - /* TODO use load detect */ - return connector_status_unknown; + /* for pre-945g platforms use load detect */ + if (encoder->crtc && encoder->crtc->enabled) { + status = intel_crt_load_detect(encoder->crtc, intel_output); + } else { + crtc = intel_get_load_detect_pipe(intel_output, + NULL, &dpms_mode); + if (crtc) { + status = intel_crt_load_detect(crtc, intel_output); + intel_release_load_detect_pipe(intel_output, dpms_mode); + } else + status = connector_status_unknown; + } + + return status; } static void intel_crt_destroy(struct drm_connector *connector) -- cgit v1.2.3-18-g5258 From 564346224daaa8f7222d7a92cdbb7bafde59ae6e Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 May 2009 20:54:41 +0930 Subject: lguest: fix on Intel when KVM loaded (unhandled trap 13) When KVM is loaded, and hence VT set up, the vmcall instruction in an lguest guest causes a #GP, not #UD. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/lguest/x86/core.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 1a83910f674..eaf722fe309 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -358,6 +358,16 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) if (emulate_insn(cpu)) return; } + /* If KVM is active, the vmcall instruction triggers a + * General Protection Fault. Normally it triggers an + * invalid opcode fault (6): */ + case 6: + /* We need to check if ring == GUEST_PL and + * faulting instruction == vmcall. */ + if (is_hypercall(cpu)) { + rewrite_hypercall(cpu); + return; + } break; case 14: /* We've intercepted a Page Fault. */ /* The Guest accessed a virtual address that wasn't mapped. @@ -403,15 +413,6 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) * up the pointer now to indicate a hypercall is pending. */ cpu->hcall = (struct hcall_args *)cpu->regs; return; - case 6: - /* kvm hypercalls trigger an invalid opcode fault (6). - * We need to check if ring == GUEST_PL and - * faulting instruction == vmcall. */ - if (is_hypercall(cpu)) { - rewrite_hypercall(cpu); - return; - } - break; } /* We didn't handle the trap, so it needs to go to the Guest. */ -- cgit v1.2.3-18-g5258 From e76a16deb8785317a23cca7204331af053e0fb4e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 17:44:56 -0700 Subject: drm/i915: Fix tiling pitch handling on 8xx. The pitch field is an exponent on pre-965, so we were rejecting buffers on 8xx that we shouldn't have. 915 got lucky in that the largest legal value happened to match (8KB / 512 = 0x10), but 8xx has a smaller tile width. Additionally, we programmed that bad value into the register on 8xx, so the only pitch that would work correctly was 4096 (512-1023 pixels), while others would probably give bad rendering or hangs. Signed-off-by: Eric Anholt fd.o bug #20473. --- drivers/gpu/drm/i915/i915_gem.c | 6 ++++-- drivers/gpu/drm/i915/i915_gem_tiling.c | 14 +++++++++++--- drivers/gpu/drm/i915/i915_reg.h | 3 ++- 3 files changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 717b6a854bc..e4408daf8ce 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2128,8 +2128,10 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) return; } - pitch_val = (obj_priv->stride / 128) - 1; - WARN_ON(pitch_val & ~0x0000000f); + pitch_val = obj_priv->stride / 128; + pitch_val = ffs(pitch_val) - 1; + WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); + val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 52a059354e8..540dd336e6e 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -213,7 +213,8 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (tiling_mode == I915_TILING_NONE) return true; - if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + if (!IS_I9XX(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) tile_width = 128; else tile_width = 512; @@ -225,11 +226,18 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride / 128 > I965_FENCE_MAX_PITCH_VAL) return false; } else if (IS_I9XX(dev)) { - if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB) + * instead of 4 (2KB) on 945s. + */ + if (pitch_val > I915_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 20)) return false; } else { - if (stride / 128 > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + if (pitch_val > I830_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 19)) return false; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9668cc0d7f4..375569d01d0 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -190,7 +190,8 @@ #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) -#define I830_FENCE_MAX_PITCH_VAL 0x10 +#define I915_FENCE_MAX_PITCH_VAL 0x10 +#define I830_FENCE_MAX_PITCH_VAL 6 #define I830_FENCE_MAX_SIZE_VAL (1<<8) #define I915_FENCE_START_MASK 0x0ff00000 -- cgit v1.2.3-18-g5258 From cfa16a0de5392c54db553ec2233a7110e4b4da7a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 18:46:16 -0700 Subject: drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing. On the 865, but not the 855, the clflush we do appears to not actually make it out to the hardware all the time. An easy way to safely reproduce was X -retro, which would show that some of the blits involved in drawing the lovely root weave didn't make it out to the hardware. Those blits are 32 bytes each, and 1-2 would be missing at various points around the screen. Other experimentation (doing more clflush, doing more AGP chipset flush, poking at some more device registers to maybe trigger more flushing) didn't help. krh came up with the wbinvd as a way to successfully get all those blits to appear. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e4408daf8ce..e2421869a40 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2423,6 +2423,16 @@ i915_gem_clflush_object(struct drm_gem_object *obj) if (obj_priv->pages == NULL) return; + /* XXX: The 865 in particular appears to be weird in how it handles + * cache flushing. We haven't figured it out, but the + * clflush+agp_chipset_flush doesn't appear to successfully get the + * data visible to the PGU, while wbinvd + agp_chipset_flush does. + */ + if (IS_I865G(obj->dev)) { + wbinvd(); + return; + } + drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); } -- cgit v1.2.3-18-g5258 From 87ad57bacb25c3f24c54f142ef445f68277705f0 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:42 +0800 Subject: cpuidle: makes AMD C1E work in acpi_idle When AMD C1E is enabled, local APIC timer will stop even in C1. This patch uses broadcast IPI to replace local APIC timer in C1. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid boot hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 72069ba5f1e..6b7bcc7e3e1 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -148,6 +148,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; + if (boot_cpu_has(X86_FEATURE_AMDC1E)) + type = ACPI_STATE_C1; + /* * Check, if one of the previous states already marked the lapic * unstable @@ -611,6 +614,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; + acpi_timer_check_state(i, pr, cx); break; case ACPI_STATE_C2: @@ -835,6 +839,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } + acpi_state_timer_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); kt2 = ktime_get_real(); @@ -842,6 +847,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_enable(); cx->usage++; + acpi_state_timer_broadcast(pr, cx, 0); return idle_time; } -- cgit v1.2.3-18-g5258 From 7d60e8ab0d5507229dfbdf456501cc378610fa01 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:54 +0800 Subject: cpuidle: fix AMD C1E suspend hang When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in suspend/resume path. This hasn't any impact in runtime path. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6b7bcc7e3e1..10a2d913635 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -834,8 +834,8 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, /* Do not access any ACPI IO ports in suspend path */ if (acpi_idle_suspend) { - acpi_safe_halt(); local_irq_enable(); + cpu_relax(); return 0; } -- cgit v1.2.3-18-g5258 From 18a36c1a398055e87a3646738abf3c1b0e98e7e2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 26 May 2009 20:48:04 -0700 Subject: gianfar: fix babbling rx error event bug Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 0642d52aef5..cf352961ae9 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -259,7 +259,7 @@ extern const char gfar_driver_version[]; (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \ | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \ - | IEVENT_MAG) + | IEVENT_MAG | IEVENT_BABR) #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_BABR 0x80000000 -- cgit v1.2.3-18-g5258 From 5ad18900355743757e7f415bcb850ea8406a13e2 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 26 May 2009 20:50:12 -0700 Subject: atlx: move modinfo data from atlx.h to atl1.c Both atl1.c and atl2.c include atlx.h, which defines some modinfo stuff. But atl2.c seems like it doesn't want the modinfo data from atlx.h, as it defines its own. Running modinfo on atl2.ko, we get conflicting information: $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn Move the modinfo data out of atlx.h and into atl1.c to eliminate the confusion: $ /sbin/modinfo drivers/net/atlx/atl1.ko | egrep "version|description|author" version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn description: Atheros L1 Gigabit Ethernet Driver $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook Reported-by: Scott Scriven Signed-off-by: Alex Chiang Acked-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ drivers/net/atlx/atlx.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 0ab22540bf5..4e817126e28 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -82,6 +82,12 @@ #include "atl1.h" +#define ATLX_DRIVER_VERSION "2.1.3" +MODULE_AUTHOR("Xiong Huang , \ + Chris Snook , Jay Cliburn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATLX_DRIVER_VERSION); + /* Temporary hack for merging atl1 and atl2 */ #include "atlx.c" diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h index 297a03da6b7..14054b75aa6 100644 --- a/drivers/net/atlx/atlx.h +++ b/drivers/net/atlx/atlx.h @@ -29,12 +29,6 @@ #include #include -#define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang , \ - Chris Snook , Jay Cliburn "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(ATLX_DRIVER_VERSION); - #define ATLX_ERR_PHY 2 #define ATLX_ERR_PHY_SPEED 7 #define ATLX_ERR_PHY_RES 8 -- cgit v1.2.3-18-g5258 From b63dc8fef7ca5c51d163295d824e78c770d48ccf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 20:55:33 -0700 Subject: bfin_mac: fix build error due to net_device_ops convert MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous commit "convert to net_device_ops" broke the Blackfin MAC driver as it declared the new structure before the function it used: CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:984: error: ‘bfin_mac_close’ undeclared here (not in a function) make[1]: *** [drivers/net/bfin_mac.o] Error 1 Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9f971ed6b58..b4da1821332 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,22 +979,7 @@ static int bfin_mac_open(struct net_device *dev) return 0; } -static const struct net_device_ops bfin_mac_netdev_ops = { - .ndo_open = bfin_mac_open, - .ndo_stop = bfin_mac_close, - .ndo_start_xmit = bfin_mac_hard_start_xmit, - .ndo_set_mac_address = bfin_mac_set_mac_address, - .ndo_tx_timeout = bfin_mac_timeout, - .ndo_set_multicast_list = bfin_mac_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = bfin_mac_poll, -#endif -}; - /* - * * this makes the board clean up everything that it can * and not talk to the outside world. Caused by * an 'ifconfig ethX down' @@ -1019,6 +1004,20 @@ static int bfin_mac_close(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; -- cgit v1.2.3-18-g5258 From 9d911d7903926a65ef49ec671bacd86bcee5eb51 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 May 2009 16:21:15 -0600 Subject: PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [] show_stack+0x50/0xa0 [] show_regs+0x820/0x860 [] die+0x190/0x2a0 [] ia64_do_page_fault+0x8e0/0xa40 [] ia64_native_leave_kernel+0x0/0x270 [] pci_remove_bus_device+0x120/0x260 [] acpiphp_disable_slot+0x410/0x540 [acpiphp] [] disable_slot+0xc0/0x120 [acpiphp] [] power_write_file+0x1e0/0x2a0 [pci_hotplug] [] pci_slot_attr_store+0x60/0xa0 [] sysfs_write_file+0x230/0x2c0 [] vfs_write+0x190/0x2e0 [] sys_write+0x80/0x100 [] ia64_ret_from_syscall+0x0/0x20 [] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Reported-by: Kenji Kaneshige Acked-by: Bjorn Helgaas Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp.h | 1 - drivers/pci/hotplug/acpiphp_glue.c | 63 ++++++++++++++++---------------------- 2 files changed, 26 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 4fc168b7009..e68d5f20ffb 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -129,7 +129,6 @@ struct acpiphp_func { struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */ struct list_head sibling; - struct pci_dev *pci_dev; struct notifier_block nb; acpi_handle handle; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index a33794d9e0d..3a6064bce56 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -32,9 +32,6 @@ /* * Lifetime rules for pci_dev: - * - The one in acpiphp_func has its refcount elevated by pci_get_slot() - * when the driver is loaded or when an insertion event occurs. It loses - * a refcount when its ejected or the driver unloads. * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() * when the bridge is scanned and it loses a refcount when the bridge * is removed. @@ -130,6 +127,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) unsigned long long adr, sun; int device, function, retval; struct pci_bus *pbus = bridge->pci_bus; + struct pci_dev *pdev; if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; @@ -213,10 +211,10 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) newfunc->slot = slot; list_add_tail(&newfunc->sibling, &slot->funcs); - /* associate corresponding pci_dev */ - newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function)); - if (newfunc->pci_dev) { + pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); + if (pdev) { slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); + pci_dev_put(pdev); } if (is_dock_device(handle)) { @@ -617,7 +615,6 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge) if (ACPI_FAILURE(status)) err("failed to remove notify handler\n"); } - pci_dev_put(func->pci_dev); list_del(list); kfree(func); } @@ -1101,22 +1098,24 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_enable_bridges(bus); pci_bus_add_devices(bus); - /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { func = list_entry(l, struct acpiphp_func, sibling); - func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, - func->function)); - if (!func->pci_dev) + dev = pci_get_slot(bus, PCI_DEVFN(slot->device, + func->function)); + if (!dev) continue; - if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && - func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && + dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { + pci_dev_put(dev); continue; + } status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); if (ACPI_FAILURE(status)) warn("find_p2p_bridge failed (error code = 0x%x)\n", status); + pci_dev_put(dev); } slot->flags |= SLOT_ENABLED; @@ -1142,17 +1141,14 @@ static void disable_bridges(struct pci_bus *bus) */ static int disable_device(struct acpiphp_slot *slot) { - int retval = 0; struct acpiphp_func *func; - struct list_head *l; + struct pci_dev *pdev; /* is this slot already disabled? */ if (!(slot->flags & SLOT_ENABLED)) goto err_exit; - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { if (func->bridge) { /* cleanup p2p bridges under this P2P bridge */ cleanup_p2p_bridge(func->bridge->handle, @@ -1160,35 +1156,28 @@ static int disable_device(struct acpiphp_slot *slot) func->bridge = NULL; } - if (func->pci_dev) { - pci_stop_bus_device(func->pci_dev); - if (func->pci_dev->subordinate) { - disable_bridges(func->pci_dev->subordinate); - pci_disable_device(func->pci_dev); + pdev = pci_get_slot(slot->bridge->pci_bus, + PCI_DEVFN(slot->device, func->function)); + if (pdev) { + pci_stop_bus_device(pdev); + if (pdev->subordinate) { + disable_bridges(pdev->subordinate); + pci_disable_device(pdev); } + pci_remove_bus_device(pdev); + pci_dev_put(pdev); } } - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { acpiphp_unconfigure_ioapics(func->handle); acpiphp_bus_trim(func->handle); - /* try to remove anyway. - * acpiphp_bus_add might have been failed */ - - if (!func->pci_dev) - continue; - - pci_remove_bus_device(func->pci_dev); - pci_dev_put(func->pci_dev); - func->pci_dev = NULL; } slot->flags &= (~SLOT_ENABLED); - err_exit: - return retval; +err_exit: + return 0; } -- cgit v1.2.3-18-g5258 From ed37d83e6aa218192fb28bb6b82498d2a8c74070 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 27 May 2009 21:39:05 +1000 Subject: md: raid5: change incorrect usage of 'min' macro to 'min_t' A recent patch to raid5.c use min on an int and a sector_t. This isn't allowed. So change it to min_t(sector_t,x,y). Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3c3626d2a1f..5d400aef8d9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= min(reshape_sectors, writepos); + writepos -= min_t(sector_t, reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= min(reshape_sectors, readpos); - safepos -= min(reshape_sectors, safepos); + readpos -= min_t(sector_t, reshape_sectors, readpos); + safepos -= min_t(sector_t, reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. -- cgit v1.2.3-18-g5258 From 346a850e3c3a20159cef2b79235e6d34aa497c65 Mon Sep 17 00:00:00 2001 From: Manuel Traut Date: Wed, 27 May 2009 06:20:05 -0700 Subject: Input: usb1400_ts - fix access to "device data" in resume function platform_data != driver_data driver data is actually the "correct" place of the struct however it is not placed there due to the need of the ac97 struct. This is broken since d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen" Signed-off-by: Manuel Traut Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index f100c7f4c1d..6954f550010 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -419,7 +419,7 @@ static int ucb1400_ts_remove(struct platform_device *dev) #ifdef CONFIG_PM static int ucb1400_ts_resume(struct platform_device *dev) { - struct ucb1400_ts *ucb = platform_get_drvdata(dev); + struct ucb1400_ts *ucb = dev->dev.platform_data; if (ucb->ts_task) { /* -- cgit v1.2.3-18-g5258 From 07f4f3e8a24138ca2f3650723d670df25687cd05 Mon Sep 17 00:00:00 2001 From: Kristian Høgsberg Date: Wed, 27 May 2009 14:37:28 -0400 Subject: i915: Set object to gtt domain when faulting it back in MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a GEM object is evicted from the GTT we set it to the CPU domain, as it might get swapped in and out or ever mmapped regularly. If the object is mmapped through the GTT it can still get evicted in this way by other objects requiring GTT space. When the GTT mapping is touched again we fault it back into the GTT, but fail to set it back to the GTT domain. This means we fail to flush any cached CPU writes to the pages backing the object which will then happen "eventually", typically after we write to the page through the uncached GTT mapping. [anholt: Note that userland does do a set_domain(GTT, GTT) when starting to access the GTT mapping. That covers getting the existing mapping of the object synchronized if it's bound to the GTT. But set_domain(GTT, GTT) doesn't do anything if the object is currently unbound. This fix covers the transition to being bound for GTT mapping.] Fixes glyph and other pixmap corruption during swapping. fd.o bug #21790 Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e2421869a40..670d1288146 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,6 +1145,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } + + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } -- cgit v1.2.3-18-g5258 From b787f2e2a37a373a045f4d9b9bed941ccff01663 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 16:25:57 -0500 Subject: fsldma: Fix compile warnings We we build with dma_addr_t as a 64-bit quantity we get: drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different Signed-off-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 15783102bf1..f18d1bde043 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -641,8 +641,8 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; - dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n", - (void *)next_dest_addr); + dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n", + (unsigned long long)next_dest_addr); set_cdar(fsl_chan, next_dest_addr); dma_start(fsl_chan); } else { @@ -756,8 +756,9 @@ static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data) */ if (stat & FSL_DMA_SR_EOSI) { dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n"); - dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n", - (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan)); + dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n", + (unsigned long long)get_cdar(fsl_chan), + (unsigned long long)get_ndar(fsl_chan)); stat &= ~FSL_DMA_SR_EOSI; update_cookie = 1; } @@ -947,8 +948,8 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, } dev_info(&dev->dev, "Probe the Freescale DMA driver for %s " - "controller at %p...\n", - match->compatible, (void *)fdev->reg.start); + "controller at 0x%llx...\n", + match->compatible, (unsigned long long)fdev->reg.start); fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end - fdev->reg.start + 1); -- cgit v1.2.3-18-g5258 From dacd2549ca61ddbdd1ed62a76ca95dea3f0e02c6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 26 May 2009 09:08:03 +0900 Subject: PCI/ACPI: fix wrong ref count handling in acpi_pci_bind() The 'dev' field of struct acpi_pci_data is having a pointer to struct pci_dev without incrementing the reference counter. Because of this, I got the following kernel oops when I was doing some pci hotplug operations. This patch fixes this bug by replacing wrong hand-made pci_find_slot() with pci_get_slot() in acpi_pci_bind(). BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [] acpi_pci_unbind+0xb1/0xdd Call Trace: [] acpi_bus_remove+0x54/0x68 [] acpi_bus_trim+0x75/0xe3 [] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp] [] disable_slot+0x20/0x60 [acpiphp] [] power_write_file+0xc8/0x110 [] pci_slot_attr_store+0x24/0x30 [] sysfs_write_file+0xce/0x140 [] vfs_write+0xc7/0x170 [] sys_write+0x50/0x90 [] system_call_fastpath+0x16/0x1b Signed-off-by: Kenji Kaneshige Reviewed-by: Bjorn Helgaas Reviewed-by: Alex Chiang Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/pci_bind.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 95650f83ce2..bc46de3d967 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device) struct acpi_pci_data *pdata; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; - struct pci_dev *dev; - struct pci_bus *bus; - if (!device || !device->parent) return -EINVAL; @@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device) * Locate matching device in PCI namespace. If it doesn't exist * this typically means that the device isn't currently inserted * (e.g. docking station, port replicator, etc.). - * We cannot simply search the global pci device list, since - * PCI devices are added to the global pci list when the root - * bridge start ops are run, which may not have happened yet. */ - bus = pci_find_bus(data->id.segment, data->id.bus); - if (bus) { - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->devfn == PCI_DEVFN(data->id.device, - data->id.function)) { - data->dev = dev; - break; - } - } - } + data->dev = pci_get_slot(pdata->bus, + PCI_DEVFN(data->id.device, data->id.function)); if (!data->dev) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %04x:%02x:%02x.%d not present in PCI namespace\n", @@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device) end: kfree(buffer.pointer); - if (result) + if (result) { + pci_dev_put(data->dev); kfree(data); - + } return result; } @@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device) if (data->dev->subordinate) { acpi_pci_irq_del_prt(data->id.segment, data->bus->number); } + pci_dev_put(data->dev); kfree(data); end: -- cgit v1.2.3-18-g5258 From a3ce6ea46cc0d6397d1b92b1a5983bb2935306ed Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 28 May 2009 09:51:31 -0700 Subject: Input: libps2 - better handle bad scheduler decisions Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler Signed-off-by: Dmitry Torokhov --- drivers/input/serio/libps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 67248c31e19..be5bbbb8ae4 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -210,7 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) timeout = wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD1), timeout); - if (ps2dev->cmdcnt && timeout > 0) { + if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) { timeout = ps2_adjust_timeout(ps2dev, command, timeout); wait_event_timeout(ps2dev->wait, -- cgit v1.2.3-18-g5258 From f42706c90470851fd2e97eda7a4109e8949bde8a Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 1 May 2009 17:21:11 +0200 Subject: USB: atmel-usba-udc : fix control out requests. usbtest #14 was failing with "udc: ep0: TXCOMP: Invalid endpoint state 2, halting endpoint..." This occured since ep0 is bidirectional and ep->is_in is not valid (must always use ep->state) Signed-off-by: Martin Fuzzey Acked-by: David Brownell Acked-by: Haavard Skinnemoen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 563d5727544..5644897c1c5 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc) { list_add_tail(&req->queue, &ep->queue); - if (ep->is_in || (ep_is_control(ep) + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || ep->state == STATUS_STAGE_IN))) usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); -- cgit v1.2.3-18-g5258 From fe92c9e481a147a9e1e14f55870f32903b967777 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 May 2009 17:22:43 -0700 Subject: USB: atmel_usb_udc: Use kzalloc() to allocate ep structures This ensures that all fields are properly initialized. Signed-off-by: Haavard Skinnemoen Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5644897c1c5..05c913cc365 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1941,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, + usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, GFP_KERNEL); if (!usba_ep) goto err_alloc_ep; -- cgit v1.2.3-18-g5258 From cab98a0a349829b145d924c0649a2d30cd6a9e3d Mon Sep 17 00:00:00 2001 From: Xiao Kaijian Date: Fri, 8 May 2009 00:48:23 +0800 Subject: USB: Yet another Conexant Clone to add to cdc-acm.c This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c Signed-off-by: Xiao Kaijian Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0a69c0977e3..7a1164dd1d3 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1375,6 +1375,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ -- cgit v1.2.3-18-g5258 From 0afb20e00b5053170c85298fed842b32d20b4ea9 Mon Sep 17 00:00:00 2001 From: Warren Free Date: Fri, 8 May 2009 10:27:08 +0200 Subject: USB: isp1760: urb_dequeue doesn't always find the urbs The option driver (and presumably others) allocates several URBs when it opens and tries to free them when it closes. The isp1760_urb_dequeue function gets called, but the packet being dequeued is not necessarily at the front of one of the 32 queues. If not, the isp1760_urb_done function doesn't get called for the URB and the process trying to free it hangs forever on a wait_queue. This patch does two things. If the URB being dequeued has others queued behind it, it re-queues them. And it searches the queues looking for the URB being dequeued rather than just looking at the one at the front of the queue. [bigeasy@linutronix] whitespace fixes, reformating Cc: stable Signed-off-by: Warren Free Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cd07ea3f0c6..15438469f21 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 reg_base, or_reg, skip_reg; unsigned long flags; struct ptd ptd; + packet_enqueue *pe; switch (usb_pipetype(urb->pipe)) { case PIPE_ISOCHRONOUS: @@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = INT_REGS_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; + pe = enqueue_an_INT_packet; break; default: @@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = ATL_REGS_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; + pe = enqueue_an_ATL_packet; break; } @@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; + struct isp1760_qh *qh = ints->qh; skip_map = isp1760_readl(hcd->regs + skip_reg); skip_map |= 1 << i; @@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base + i * sizeof(ptd), sizeof(ptd)); qtd = ints->qtd; - - clean_up_qtdlist(qtd); + qtd = clean_up_qtdlist(qtd); free_mem(priv, ints->payload); @@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, ints->payload = 0; isp1760_urb_done(priv, urb, status); + if (qtd) + pe(hcd, qh, qtd); break; + + } else if (ints->qtd) { + struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + + for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + if (qtd->urb == urb) { + prev_qtd->hw_next = clean_up_qtdlist(qtd); + isp1760_urb_done(priv, urb, status); + break; + } + prev_qtd = qtd; + } + /* we found the urb before the end of the list */ + if (qtd) + break; } ints++; } -- cgit v1.2.3-18-g5258 From 0a3c8549ea7e94d74a41096d42bc6cdf43d183bf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 27 May 2009 11:25:52 -0400 Subject: usb-serial: fix crash when sub-driver updates firmware This patch (as1244) fixes a crash in usb-serial that occurs when a sub-driver returns a positive value from its attach method, indicating that new firmware was loaded and the device will disconnect and reconnect. The usb-serial core then skips the step of registering the port devices; when the disconnect occurs, the attempt to unregister the ports fails dramatically. This problem shows up with Keyspan devices and it might affect others as well. When the attach method returns a positive value, the patch sets num_ports to 0. This tells usb_serial_disconnect() not to try unregistering any of the ports; instead they are cleaned up by destroy_serial(). Signed-off-by: Alan Stern Tested-by: Benjamin Herrenschmidt Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0a566eea49c..f331e2bde88 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -974,6 +974,7 @@ int usb_serial_probe(struct usb_interface *interface, if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ + serial->num_ports = 0; goto exit; } } -- cgit v1.2.3-18-g5258 From 29868b281f6d057b4cbe348f4483f1717c021c5c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 08:49:48 -0400 Subject: Revert "USB: Correct Makefile to make isp1760 buildable" This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger CC: Greg Kroah-Hartman CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 0716cdb44cd..0a3dc5ece63 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ -obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ -- cgit v1.2.3-18-g5258 From 5c8563d773c0e9f0ac2a552e84806decd98ce732 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 28 May 2009 14:24:07 -0700 Subject: Driver Core: do not oops when driver_unregister() is called for unregistered drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We also fix a problem with cleaning up properly when initializing drivers and devices, so checks like this will work successfully. Portions of the patch by Linus and Greg and Ingo. Reported-by: Ozan Çağlayan Signed-off-by: Kay Sievers Cc: Linus Torvalds Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 4 +++- drivers/base/core.c | 5 ++++- drivers/base/driver.c | 4 ++++ 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/bus.c b/drivers/base/bus.c index dc030f1f00f..c6599618523 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -700,8 +700,10 @@ int bus_add_driver(struct device_driver *drv) } kobject_uevent(&priv->kobj, KOBJ_ADD); - return error; + return 0; out_unregister: + kfree(drv->p); + drv->p = NULL; kobject_put(&priv->kobj); out_put_bus: bus_put(bus); diff --git a/drivers/base/core.c b/drivers/base/core.c index 4aa527b8a91..1977d4beb89 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -879,7 +879,7 @@ int device_add(struct device *dev) } if (!dev_name(dev)) - goto done; + goto name_error; pr_debug("device: '%s': %s\n", dev_name(dev), __func__); @@ -978,6 +978,9 @@ done: cleanup_device_parent(dev); if (parent) put_device(parent); +name_error: + kfree(dev->p); + dev->p = NULL; goto done; } diff --git a/drivers/base/driver.c b/drivers/base/driver.c index c51f11bb29a..8ae0f63602e 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -257,6 +257,10 @@ EXPORT_SYMBOL_GPL(driver_register); */ void driver_unregister(struct device_driver *drv) { + if (!drv || !drv->p) { + WARN(1, "Unexpected driver unregister!\n"); + return; + } driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } -- cgit v1.2.3-18-g5258 From 2f102607ac77354b02a76cf2748598ce9f270f08 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 27 May 2009 23:59:58 -0400 Subject: i7300_idle: allow testing on i5000-series hardware w/o re-compile Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown Acked-by: Andrew Henroid --- drivers/dma/ioat_dma.c | 2 +- drivers/idle/i7300_idle.c | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 1955ee8d6d2..a600fc0f796 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,7 +173,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); #ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL - if (i7300_idle_platform_probe(NULL, NULL) == 0) { + if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) { device->common.chancnt--; } #endif diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index bf740394d70..949c97ff57e 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -41,6 +41,10 @@ static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); +static int forceload; +module_param_named(forceload, forceload, uint, 0644); +MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); + #define dprintk(fmt, arg...) \ do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) @@ -552,7 +556,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) return -ENODEV; if (i7300_idle_thrt_save()) -- cgit v1.2.3-18-g5258 From 10b6d95612672f89deb39b5a60fb677c78ba4844 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:02 +0000 Subject: cxgb3: fix dma mapping regression Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/adapter.h | 4 ++-- drivers/net/cxgb3/sge.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 714df2b675e..c888e97c967 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -85,8 +85,8 @@ struct fl_pg_chunk { struct page *page; void *va; unsigned int offset; - u64 *p_cnt; - DECLARE_PCI_UNMAP_ADDR(mapping); + unsigned long *p_cnt; + dma_addr_t mapping; }; struct rx_desc; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 26d3587f339..b3ee2bc1a00 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -355,7 +355,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, (*d->pg_chunk.p_cnt)--; if (!*d->pg_chunk.p_cnt) pci_unmap_page(pdev, - pci_unmap_addr(&d->pg_chunk, mapping), + d->pg_chunk.mapping, q->alloc_size, PCI_DMA_FROMDEVICE); put_page(d->pg_chunk.page); @@ -454,7 +454,7 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, q->pg_chunk.offset = 0; mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, 0, q->alloc_size, PCI_DMA_FROMDEVICE); - pci_unmap_addr_set(&q->pg_chunk, mapping, mapping); + q->pg_chunk.mapping = mapping; } sd->pg_chunk = q->pg_chunk; @@ -511,8 +511,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) nomem: q->alloc_failed++; break; } - mapping = pci_unmap_addr(&sd->pg_chunk, mapping) + - sd->pg_chunk.offset; + mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset; pci_unmap_addr_set(sd, dma_addr, mapping); add_one_rx_chunk(mapping, d, q->gen); @@ -881,7 +880,7 @@ recycle: (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); if (!skb) { @@ -2096,7 +2095,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); -- cgit v1.2.3-18-g5258 From c22c8149313ee85c912e7b77a7afd04be8b8cba8 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:08 +0000 Subject: cxgb3: link fault fixes Do not call t3_link_fault() under spinlock, as it calls msleep(). Besides, only the access to pi->link_fault needs to be serialized. Also initialize local variables before checking the link status, link state fields might otherwise end up containing garbage. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 8 +++++--- drivers/net/cxgb3/t3_hw.c | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 7ea48414c6c..17858b9a583 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2496,14 +2496,16 @@ static void check_link_status(struct adapter *adapter) for_each_port(adapter, i) { struct net_device *dev = adapter->port[i]; struct port_info *p = netdev_priv(dev); + int link_fault; spin_lock_irq(&adapter->work_lock); - if (p->link_fault) { + link_fault = p->link_fault; + spin_unlock_irq(&adapter->work_lock); + + if (link_fault) { t3_link_fault(adapter, i); - spin_unlock_irq(&adapter->work_lock); continue; } - spin_unlock_irq(&adapter->work_lock); if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) { t3_xgm_intr_disable(adapter, i); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 4f68aeb2679..4950d5d789a 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1274,6 +1274,11 @@ void t3_link_fault(struct adapter *adapter, int port_id) A_XGM_INT_STATUS + mac->offset); link_fault &= F_LINKFAULTCHANGE; + link_ok = lc->link_ok; + speed = lc->speed; + duplex = lc->duplex; + fc = lc->fc; + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); if (link_fault) { -- cgit v1.2.3-18-g5258 From 4e0168fa4842e27795a75b205a510f25b62181d9 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Thu, 28 May 2009 02:05:53 +0000 Subject: mac8390: fix build with NET_POLL_CONTROLLER Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion"). Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/mac8390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index f26667d5eaa..22e74a0e036 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -489,7 +489,7 @@ static const struct net_device_ops mac8390_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, + .ndo_poll_controller = __ei_poll, #endif }; -- cgit v1.2.3-18-g5258 From 8541c1180a355c4da283fc6b03a92c0233823c1b Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Thu, 23 Apr 2009 15:47:22 +0400 Subject: mtd: MXC NAND driver fixes (v5) The following patch fixes: - re-initialization of host->col_addr which is used as byte index between the successive READID flash commands. - compile error when CONFIG_PM is enabled - pass on the error code from clk_get() - return -ENOMEM in case of failed ioremap() - pass on the return value of platform_driver_probe() directly - remove excessive printk - let command line partition table parsing with mxc_nand name. The cmd_line parsing is done via name that differs from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit" Signed-off-by: Vladimir Barinov Signed-off-by: Lothar Wassmann Acked-by: Sascha Hauer Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 43 +++++++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index f3548d04801..40c26080ecd 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READID: + host->col_addr = 0; send_read_id(host); break; @@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; + mtd->name = "mxc_nand"; /* 50 us command delay time */ this->chip_delay = 5; @@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) + if (IS_ERR(host->clk)) { + err = PTR_ERR(host->clk); goto eclk; + } clk_enable(host->clk); host->clk_act = 1; @@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->regs = ioremap(res->start, res->end - res->start + 1); if (!host->regs) { - err = -EIO; + err = -ENOMEM; goto eres; } @@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - if (info) - ret = info->suspend(info); - - /* Disable the NFC clock */ - clk_disable(nfc_clk); /* FIXME */ + if (mtd) { + ret = mtd->suspend(mtd); + /* Disable the NFC clock */ + clk_disable(host->clk); + } return ret; } static int mxcnd_resume(struct platform_device *pdev) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - /* Enable the NFC clock */ - clk_enable(nfc_clk); /* FIXME */ - if (info) - info->resume(info); + if (mtd) { + /* Enable the NFC clock */ + clk_enable(host->clk); + mtd->resume(mtd); + } return ret; } @@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = { static int __init mxc_nd_init(void) { - /* Register the device driver structure. */ - pr_info("MXC MTD nand Driver\n"); - if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) { - printk(KERN_ERR "Driver register failed for mxcnd_driver\n"); - return -ENODEV; - } - return 0; + return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) -- cgit v1.2.3-18-g5258 From 21a4cc00e8e67edcfc1bdb9af6d370ed1226eb86 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 28 May 2009 11:39:02 +0200 Subject: at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan http://bugzilla.kernel.org/show_bug.cgi?id=13312 at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed, which then calls at76_config which needs the same mutex. This reworks the ordering to not hold the lock while calling ieee80211_scan_completed. Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 744f4f4dd3d..8d93ca4651b 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1873,18 +1873,18 @@ static void at76_dwork_hw_scan(struct work_struct *work) if (ret != CMD_STATUS_COMPLETE) { queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, SCAN_POLL_INTERVAL); - goto exit; + mutex_unlock(&priv->mtx); + return; } - ieee80211_scan_completed(priv->hw, false); - if (is_valid_ether_addr(priv->bssid)) at76_join(priv); - ieee80211_wake_queues(priv->hw); - -exit: mutex_unlock(&priv->mtx); + + ieee80211_scan_completed(priv->hw, false); + + ieee80211_wake_queues(priv->hw); } static int at76_hw_scan(struct ieee80211_hw *hw, -- cgit v1.2.3-18-g5258 From aeeab4ff06b8e29cfe2fe730ba626f7e2487ba03 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 May 2009 09:21:57 +0200 Subject: rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8a0823588c5..3d94e7dfea6 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -430,6 +430,7 @@ config RTL8187 ASUS P5B Deluxe Toshiba Satellite Pro series of laptops Asus Wireless Link + Linksys WUSB54GC-EU Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bac6cfba6ab..d51ba0a88c2 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -71,6 +71,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, /* AirLive */ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, + /* Linksys */ + {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, {} }; -- cgit v1.2.3-18-g5258 From b898f4f869da5b9d41f297fff87aca4cd42d80b3 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 28 May 2009 14:34:29 -0700 Subject: drivers/serial/mpc52xx_uart.c: fix array overindexing check The check for an overindexing of mpc52xx_uart_{ports,nodes} has an off-by-one. Signed-off-by: Roel Kluin Acked-by: Wolfram Sang Acked-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/mpc52xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7f72f8ceaa6..b3feb6198d5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options) pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", co, co->index, options); - if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { pr_debug("PSC%x out of range\n", co->index); return -EINVAL; } -- cgit v1.2.3-18-g5258 From b5d598b41aebee67bf95802b68b888e98a449687 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:33 -0700 Subject: parport_gsc: fix printk format error drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index e6a7e847ee8..ea31a452b15 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", - dev->hpa.start); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", + (unsigned long long)dev->hpa.start); return -ENODEV; } -- cgit v1.2.3-18-g5258 From 8e8e8267f0a08c2415d5f51bc9a9fde6d5400619 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:34 -0700 Subject: serial: 8250_gsc: fix printk format error drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Cc: Alan Cox Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 418b4fe9a0a..33149d982e8 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) printk(KERN_INFO - "Serial: device 0x%lx not configured.\n" + "Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", - dev->hpa.start); + (unsigned long long)dev->hpa.start); return -ENODEV; } -- cgit v1.2.3-18-g5258 From 17663e59704bea838a9236f299104e30909a43b1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 28 May 2009 14:34:35 -0700 Subject: S3C-fb: PM fix Correctly restore the FrameBuffer register state in the resume function. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c-fb.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 5e9c6302433..d3a568e6b16 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) int win; for (win = 0; win <= S3C_FB_MAX_WIN; win++) - s3c_fb_release_win(sfb, sfb->windows[win]); + if (sfb->windows[win]) + s3c_fb_release_win(sfb, sfb->windows[win]); iounmap(sfb->regs); @@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_fb_resume(struct platform_device *pdev) { struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_platdata *pd = sfb->pdata; struct s3c_fb_win *win; int win_no; clk_enable(sfb->bus_clk); + /* setup registers */ + writel(pd->vidcon1, sfb->regs + VIDCON1); + + /* zero all windows before we do anything */ + for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) + s3c_fb_clear_win(sfb, win_no); + + /* restore framebuffers */ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { win = sfb->windows[win_no]; if (!win) -- cgit v1.2.3-18-g5258 From 53b7479bbdaedcc7846c66fd608fe66f1b5aa35b Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 28 May 2009 14:34:36 -0700 Subject: atmel_lcdfb: correct fifo size for some products Remove wrong fifo size definition for some AT91 products. Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048 (words) has been introduced by mistake. In fact, all products (AT91/AT32) are sharing the same fifo size of 512 words. Signed-off-by: Nicolas Ferre Cc: Andrew Victor Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 9a577a800db..2fb63f6ea2f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -29,14 +29,8 @@ /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 -#define ATMEL_LCDC_DMA_BURST_LEN 8 - -#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \ - defined(CONFIG_ARCH_AT91SAM9RL) -#define ATMEL_LCDC_FIFO_SIZE 2048 -#else -#define ATMEL_LCDC_FIFO_SIZE 512 -#endif +#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ +#define ATMEL_LCDC_FIFO_SIZE 512 /* words */ #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ -- cgit v1.2.3-18-g5258 From 56ec0c7b88c6eb17733e5015f31302f6312511ed Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:42 -0700 Subject: edac: AMD8111 & AMD8131 use dev_name() The "bus_id" member in the device structure has been obsolete, use dev_name() instead. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/amd8111_edac.c | 4 ++-- drivers/edac/amd8131_edac.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c index 61469218112..2cb58ef743e 100644 --- a/drivers/edac/amd8111_edac.c +++ b/drivers/edac/amd8111_edac.c @@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev, dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = dev_info->check; @@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev, pci_info->edac_dev->dev = &pci_info->dev->dev; pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) pci_info->edac_dev->edac_check = pci_info->check; diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c index c083b31cac5..b432d60c622 100644 --- a/drivers/edac/amd8131_edac.c +++ b/drivers/edac/amd8131_edac.c @@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = amd8131_chipset.check; -- cgit v1.2.3-18-g5258 From 715fe7af9fd7328af661742bfadc195e665a837f Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:43 -0700 Subject: edac: AMD8111 & AMD8131 Kconfig fixup The amd8111_edac.c driver will fail allmodconfig on architectures other than PPC, introduce Kconfig dependency to avoid this, since both AMD8111 and AMD8131 chips are only adopted on Maple so far. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/Kconfig | 8 ++++++-- drivers/edac/Makefile | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index e5f5c5a8ba6..956982f8739 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -192,16 +192,20 @@ config EDAC_PPC4XX config EDAC_AMD8131 tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8131 HyperTransport PCI-X Tunnel chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. config EDAC_AMD8111 tristate "AMD8111 HyperTransport I/O Hub" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8111 HyperTransport I/O Hub chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index a5fdcf02f59..59076819135 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -35,3 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o +obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o -- cgit v1.2.3-18-g5258 From b8e7e40abeac49644fec4a4f52ffe74c7b05eca0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 28 May 2009 14:01:35 +0100 Subject: 8250: Fix oops from setserial If you setserial a port which has never been initialised we change the type but don't update the I/O method pointers. The same problem is true if you change the io type of a port - but nobody ever does that so nobody noticed! Remember the old type and when attaching if the type has changed reload the port accessor pointers. We can't do it blindly as some 8250 drivers load custom accessors and we must not stomp those. Tested-by: Victor Seryodkin Closes-bug: #13367 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b4b39811b44..a0127e93ade 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -137,6 +137,7 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must @@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) static void set_io_from_upio(struct uart_port *p) { + struct uart_8250_port *up = (struct uart_8250_port *)p; switch (p->iotype) { case UPIO_HUB6: p->serial_in = hub6_serial_in; @@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = io_serial_out; break; } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void @@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port) up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) @@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + serial8250_isa_init_ports(); for (i = 0; i < nr_uarts; i++) { -- cgit v1.2.3-18-g5258 From 34d531e640cb805973cf656b15c716b961565cea Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 26 May 2009 15:11:06 -0400 Subject: ACPI: sanity check _PSS frequency to prevent cpufreq crash When BIOS SETUP is changed to disable EIST, some BIOS hand the OS an un-initialized _PSS: Name (_PSS, Package (0x06) { Package (0x06) { 0x80000000, // frequency [MHz] 0x80000000, // power [mW] 0x80000000, // latency [us] 0x80000000, // BM latency [us] 0x80000000, // control 0x80000000 // status }, ... These are outrageous values for frequency, power and latency, raising the question where to draw the line between legal and illegal. We tend to survive garbage in the power and latency fields, but we can BUG_ON when garbage is in the frequency field. Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz. So disregard a _PSS with a frequency so large that it can't be represented by cpufreq. https://bugzilla.redhat.com/show_bug.cgi?id=500311 Signed-off-by: Len Brown --- drivers/acpi/processor_perflib.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index cafb41000f6..60e543d3234 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr) (u32) px->bus_master_latency, (u32) px->control, (u32) px->status)); - if (!px->core_frequency) { - printk(KERN_ERR PREFIX - "Invalid _PSS data: freq is zero\n"); + /* + * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq + */ + if (!px->core_frequency || + ((u32)(px->core_frequency * 1000) != + (px->core_frequency * 1000))) { + printk(KERN_ERR FW_BUG PREFIX + "Invalid BIOS _PSS frequency: 0x%llx MHz\n", + px->core_frequency); result = -EFAULT; kfree(pr->performance->states); goto end; -- cgit v1.2.3-18-g5258 From 34ac272b3aaef11a91e19a72f3ac5772a96ffbc5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 May 2009 23:35:34 -0400 Subject: ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7..ee45e760422 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -570,6 +570,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "eMachines E510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), + }, + }, {} }; -- cgit v1.2.3-18-g5258 From 93bcece20ef87c29548ec7e66532f1018572cea0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 19 May 2009 15:08:41 -0400 Subject: ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ee45e760422..6d897bbd3bd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -578,6 +578,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5315", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), + }, + }, {} }; -- cgit v1.2.3-18-g5258 From 1fc8d33acafe68bdcc21b327d22ef3820b819727 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 20 May 2009 11:56:08 +0530 Subject: drm/i915: acpi/video.c fix section mismatch warning Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7..a79b8853526 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2334,7 +2334,7 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -void __exit acpi_video_exit(void) +void acpi_video_exit(void) { acpi_bus_unregister_driver(&acpi_video_bus); -- cgit v1.2.3-18-g5258 From 21671b88be331fb9c95891d5ee7d2e940e6b024c Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Fri, 22 May 2009 10:23:40 +0200 Subject: ACPI processor: remove spurious newline from warning message Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 7f16f5f8e7d..227543789ba 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -840,7 +840,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) state = acpi_get_throttling_state(pr, value); if (state == -1) { ACPI_WARNING((AE_INFO, - "Invalid throttling state, reset\n")); + "Invalid throttling state, reset")); state = 0; ret = acpi_processor_set_throttling(pr, state); if (ret) -- cgit v1.2.3-18-g5258 From 31db5645bda24682dadbc97d5e8a7918ade2a298 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 29 May 2009 21:11:27 -0400 Subject: ACPI, i915: build fix (v2) drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' v2: move under DRM_I915 from DRM_I915_KMS Signed-off-by: Len Brown Signed-off-by: Randy Dunlap --- drivers/gpu/drm/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4cd35d8fd79..f5d46e7199d 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -67,12 +67,18 @@ config DRM_I830 will load the correct one. config DRM_I915 + tristate "i915 driver" select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB select FRAMEBUFFER_CONSOLE if !EMBEDDED - tristate "i915 driver" + # i915 depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the @@ -84,12 +90,6 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 - # i915 KMS depends on ACPI_VIDEO when ACPI is enabled - # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI - select BACKLIGHT_CLASS_DEVICE if ACPI - select INPUT if ACPI - select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old -- cgit v1.2.3-18-g5258 From 465440d2720543669841db5b0691ba41892ed0ae Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 25 May 2009 20:57:21 +0000 Subject: mlx4_en: Fix a kernel panic when waking tx queue When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index ac6fc499b28..e5c98a98ad3 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -426,7 +426,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) INC_PERF_COUNTER(priv->pstats.tx_poll); - if (!spin_trylock(&ring->comp_lock)) { + if (!spin_trylock_irq(&ring->comp_lock)) { mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); return; } @@ -439,7 +439,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) if (inflight && priv->port_up) mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, @@ -482,9 +482,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock(&ring->comp_lock)) { + if (spin_trylock_irq(&ring->comp_lock)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } } -- cgit v1.2.3-18-g5258 From bdb0e010bf0061a73027cc84dd7ad192c663eca3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 May 2009 22:04:54 -0700 Subject: ath1e: add new device id for asus hardware Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/atl1e/atl1e_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index fb57b750866..1342418fb20 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -37,6 +37,7 @@ char atl1e_driver_version[] = DRV_VERSION; */ static struct pci_device_id atl1e_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)}, /* required last entry */ { 0 } }; -- cgit v1.2.3-18-g5258 From c339dfdd65b52bfd947ab29d1210314a2f6d622d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 30 May 2009 20:06:54 +0200 Subject: ide_pci_generic: add quirk for Netcell ATA RAID We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pci-generic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 61111fd2713..39d4e01f5c9 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -33,6 +33,16 @@ static int ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); +static void netcell_quirkproc(ide_drive_t *drive) +{ + /* mark words 85-87 as valid */ + drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000; +} + +static const struct ide_port_ops netcell_port_ops = { + .quirkproc = netcell_quirkproc, +}; + #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ .name = DRV_NAME, \ @@ -74,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 6: Revolution */ .name = DRV_NAME, + .port_ops = &netcell_port_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_OFF_BOARD, -- cgit v1.2.3-18-g5258 From cf9f6e21c155d5add733b969c695837ead79eeab Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 1 Jun 2009 03:12:04 -0700 Subject: 3c509: Add missing EISA IDs Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/3c509.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index fbb37192199..682aad89708 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -480,9 +480,13 @@ static int pnp_registered; #ifdef CONFIG_EISA static struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, { "TCM5092" }, { "TCM5093" }, + { "TCM5094" }, { "TCM5095" }, + { "TCM5098" }, { "" } }; MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); -- cgit v1.2.3-18-g5258 From 39d8bbedb9571a89d638f5b05358f26ab503d7a6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 1 Jun 2009 13:46:49 +0200 Subject: hwmon: (lm78) Add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger Signed-off-by: Jean Delvare --- drivers/hwmon/lm78.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index b5e3b285169..a1787fdf5b9 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -182,7 +182,7 @@ static struct platform_driver lm78_isa_driver = { .name = "lm78", }, .probe = lm78_isa_probe, - .remove = lm78_isa_remove, + .remove = __devexit_p(lm78_isa_remove), }; -- cgit v1.2.3-18-g5258 From dd0a3e77c825c9f5c6d2a97deb047f8d52026581 Mon Sep 17 00:00:00 2001 From: SUGIOKA Toshinobu Date: Mon, 1 Jun 2009 03:53:41 +0000 Subject: serial: sh-sci: Fix up PORT_SCI console output ordering. Fix SCI transmission sequence in console output function. This reorders the write sequence to match the SH-3 manual, and corrects a console corruption bug observed on SH-3 SCI. Signed-off-by: Toshinobu Sugioka Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index fa4d52a6c03..a4cf1079b31 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -151,9 +151,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); sci_out(port, SCxTDR, c); + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ -- cgit v1.2.3-18-g5258 From 5a9a8e32ebe269c71d8d3e78f9435fe7729f38e9 Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Tue, 2 Jun 2009 00:19:52 -0700 Subject: forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Add a phy_power_down parameter to forcedeth: set to 1 to power down the phy and disable the link when an interface goes down; set to 0 to always leave the phy powered up. The phy power state persists across reboots; Windows, some BIOSes, and older versions of Linux don't bother to power up the phy again, forcing users to remove all power to get the interface working (see http://bugzilla.kernel.org/show_bug.cgi?id=13072). Leaving the phy powered on is the safest default behavior. Users accustomed to seeing the link state reflect the interface state and/or wanting to minimize power consumption can set phy_power_down=1 if compatibility with other OSes is not an issue. Signed-off-by: Ed Swierk Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index f9a846b1b92..9f6a68fb7b4 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -897,6 +897,12 @@ enum { }; static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED; +/* + * Power down phy when interface is down (persists through reboot; + * older Linux and other OSes may not power it up again) + */ +static int phy_power_down = 0; + static inline struct fe_priv *get_nvpriv(struct net_device *dev) { return netdev_priv(dev); @@ -1485,7 +1491,10 @@ static int phy_init(struct net_device *dev) /* restart auto negotiation, power down phy */ mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN); + mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE); + if (phy_power_down) { + mii_control |= BMCR_PDOWN; + } if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { return PHY_ERROR; } @@ -5513,7 +5522,7 @@ static int nv_close(struct net_device *dev) nv_drain_rxtx(dev); - if (np->wolenabled) { + if (np->wolenabled || !phy_power_down) { writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags); nv_start_rx(dev); } else { @@ -6367,6 +6376,8 @@ module_param(dma_64bit, int, 0); MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0."); module_param(phy_cross, int, 0); MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0."); +module_param(phy_power_down, int, 0); +MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0)."); MODULE_AUTHOR("Manfred Spraul "); MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver"); -- cgit v1.2.3-18-g5258 From ea30e11970a96cfe5e32c03a29332554573b4a10 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 2 Jun 2009 01:29:58 -0700 Subject: e1000: add missing length check to e1000 receive routine Patch to fix bad length checking in e1000. E1000 by default does two things: 1) Spans rx descriptors for packets that don't fit into 1 skb on recieve 2) Strips the crc from a frame by subtracting 4 bytes from the length prior to doing an skb_put Since the e1000 driver isn't written to support receiving packets that span multiple rx buffers, it checks the End of Packet bit of every frame, and discards it if its not set. This places us in a situation where, if we have a spanning packet, the first part is discarded, but the second part is not (since it is the end of packet, and it passes the EOP bit test). If the second part of the frame is small (4 bytes or less), we subtract 4 from it to remove its crc, underflow the length, and wind up in skb_over_panic, when we try to skb_put a huge number of bytes into the skb. This amounts to a remote DOS attack through careful selection of frame size in relation to interface MTU. The fix for this is already in the e1000e driver, as well as the e1000 sourceforge driver, but no one ever pushed it to e1000. This is lifted straight from e1000e, and prevents small frames from causing the underflow described above Signed-off-by: Neil Horman Tested-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b1419e21b46..fffb006b7d9 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4027,8 +4027,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, PCI_DMA_FROMDEVICE); length = le16_to_cpu(rx_desc->length); - - if (unlikely(!(status & E1000_RXD_STAT_EOP))) { + /* !EOP means multiple descriptors were used to store a single + * packet, also make sure the frame isn't just CRC only */ + if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); -- cgit v1.2.3-18-g5258 From 4a4b2d7684c66dbd8ed04eb284bc94a78e061d29 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 2 Jun 2009 14:47:50 +0200 Subject: cciss: factor out core of sendcmd() for a more sane interface Factor out the core of sendcmd() to provide a simpler interface which exposes all the error information to the caller and make the original sendcmd use this new function. Rationale: The SCSI error handling routines need to send commands with interrupts turned off, but they also need access to the full error information. Signed-off-by: Stephen M. Cameron Cc: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 225 ++++++++++++++++++++++++-------------------------- 1 file changed, 109 insertions(+), 116 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 94474f5f8bc..8d0f8932fee 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2373,41 +2373,21 @@ static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) return 0; } -/* - * Send a command to the controller, and wait for it to complete. - * Only used at init time. +/* Send command c to controller h and poll for it to complete. + * Turns interrupts off on the board. Used at driver init time + * and during SCSI error recovery. */ -static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, - __u8 page_code, unsigned char *scsi3addr, int cmd_type) +static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c) { - CommandList_struct *c; int i; unsigned long complete; - ctlr_info_t *info_p = hba[ctlr]; + int status = IO_ERROR; u64bit buff_dma_handle; - int status, done = 0; - if ((c = cmd_alloc(info_p, 1)) == NULL) { - printk(KERN_WARNING "cciss: unable to get memory"); - return IO_ERROR; - } - status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, scsi3addr, cmd_type); - if (status != IO_OK) { - cmd_free(info_p, c, 1); - return status; - } - resend_cmd1: - /* - * Disable interrupt - */ -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "cciss: turning intr off\n"); -#endif /* CCISS_DEBUG */ - info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF); +resend_cmd1: + + /* Disable interrupt on the board. */ + h->access.set_intr_mask(h, CCISS_INTR_OFF); /* Make sure there is room in the command FIFO */ /* Actually it should be completely empty at this time */ @@ -2415,21 +2395,15 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use /* tape side of the driver. */ for (i = 200000; i > 0; i--) { /* if fifo isn't full go */ - if (!(info_p->access.fifo_full(info_p))) { - + if (!(h->access.fifo_full(h))) break; - } udelay(10); printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," - " waiting!\n", ctlr); + " waiting!\n", h->ctlr); } - /* - * Send the cmd - */ - info_p->access.submit_command(info_p, c); - done = 0; + h->access.submit_command(h, c); /* Send the cmd */ do { - complete = pollcomplete(ctlr); + complete = pollcomplete(h->ctlr); #ifdef CCISS_DEBUG printk(KERN_DEBUG "cciss: command completed\n"); @@ -2438,97 +2412,116 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use if (complete == 1) { printk(KERN_WARNING "cciss cciss%d: SendCmd Timeout out, " - "No command list address returned!\n", ctlr); + "No command list address returned!\n", h->ctlr); status = IO_ERROR; - done = 1; break; } - /* This will need to change for direct lookup completions */ - if ((complete & CISS_ERROR_BIT) - && (complete & ~CISS_ERROR_BIT) == c->busaddr) { - /* if data overrun or underun on Report command - ignore it - */ - if (((c->Request.CDB[0] == CISS_REPORT_LOG) || - (c->Request.CDB[0] == CISS_REPORT_PHYS) || - (c->Request.CDB[0] == CISS_INQUIRY)) && - ((c->err_info->CommandStatus == - CMD_DATA_OVERRUN) || - (c->err_info->CommandStatus == CMD_DATA_UNDERRUN) - )) { - complete = c->busaddr; - } else { - if (c->err_info->CommandStatus == - CMD_UNSOLICITED_ABORT) { - printk(KERN_WARNING "cciss%d: " - "unsolicited abort %p\n", - ctlr, c); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying %p\n", - ctlr, c); - c->retry_count++; - /* erase the old error */ - /* information */ - memset(c->err_info, 0, - sizeof - (ErrorInfo_struct)); - goto resend_cmd1; - } else { - printk(KERN_WARNING - "cciss%d: retried %p too " - "many times\n", ctlr, c); - status = IO_ERROR; - goto cleanup1; - } - } else if (c->err_info->CommandStatus == - CMD_UNABORTABLE) { - printk(KERN_WARNING - "cciss%d: command could not be aborted.\n", - ctlr); - status = IO_ERROR; - goto cleanup1; - } - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " Error %x \n", ctlr, - c->err_info->CommandStatus); - printk(KERN_WARNING "ciss ciss%d: sendcmd" - " offensive info\n" - " size %x\n num %x value %x\n", - ctlr, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_size, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_num, - c->err_info->MoreErrInfo.Invalid_Cmd. - offense_value); - status = IO_ERROR; - goto cleanup1; - } + /* If it's not the cmd we're looking for, save it for later */ + if ((complete & ~CISS_ERROR_BIT) != c->busaddr) { + if (add_sendcmd_reject(c->Request.CDB[0], + h->ctlr, complete) != 0) + BUG(); /* we are hosed if we get here. */ + continue; + } + + /* It is our command. If no error, we're done. */ + if (!(complete & CISS_ERROR_BIT)) { + status = IO_OK; + break; + } + + /* There is an error... */ + + /* if data overrun or underun on Report command ignore it */ + if (((c->Request.CDB[0] == CISS_REPORT_LOG) || + (c->Request.CDB[0] == CISS_REPORT_PHYS) || + (c->Request.CDB[0] == CISS_INQUIRY)) && + ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) || + (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) { + complete = c->busaddr; + status = IO_OK; + break; } - /* This will need changing for direct lookup completions */ - if (complete != c->busaddr) { - if (add_sendcmd_reject(cmd, ctlr, complete) != 0) { - BUG(); /* we are pretty much hosed if we get here. */ + + if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) { + printk(KERN_WARNING "cciss%d: unsolicited abort %p\n", + h->ctlr, c); + if (c->retry_count < MAX_CMD_RETRIES) { + printk(KERN_WARNING "cciss%d: retrying %p\n", + h->ctlr, c); + c->retry_count++; + /* erase the old error information */ + memset(c->err_info, 0, sizeof(c->err_info)); + goto resend_cmd1; } - continue; - } else - done = 1; - } while (!done); + printk(KERN_WARNING "cciss%d: retried %p too many " + "times\n", h->ctlr, c); + status = IO_ERROR; + goto cleanup1; + } + + if (c->err_info->CommandStatus == CMD_UNABORTABLE) { + printk(KERN_WARNING "cciss%d: command could not be " + "aborted.\n", h->ctlr); + status = IO_ERROR; + goto cleanup1; + } + + printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr); + printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n", + c->Request.CDB[0], c->err_info->CommandStatus); + if (c->err_info->CommandStatus == CMD_TARGET_STATUS) { + printk(KERN_WARNING "Target status = 0x%02x\n", + c->err_info->ScsiStatus); + if (c->err_info->ScsiStatus == 2) /* chk cond */ + printk(KERN_WARNING "Sense key = 0x%02x\n", + 0xf & c->err_info->SenseInfo[2]); + } + + status = IO_ERROR; + goto cleanup1; + + } while (1); - cleanup1: +cleanup1: /* unlock the data buffer from DMA */ buff_dma_handle.val32.lower = c->SG[0].Addr.lower; buff_dma_handle.val32.upper = c->SG[0].Addr.upper; - pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val, + pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); #ifdef CONFIG_CISS_SCSI_TAPE /* if we saved some commands for later, process them now. */ - if (info_p->scsi_rejects.ncompletions > 0) - do_cciss_intr(0, info_p); + if (h->scsi_rejects.ncompletions > 0) + do_cciss_intr(0, h); #endif - cmd_free(info_p, c, 1); + return status; +} + +/* + * Send a command to the controller, and wait for it to complete. + * Used at init time, and during SCSI error recovery. + */ +static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, + unsigned int use_unit_num,/* 0: address the controller, + 1: address logical volume log_unit, + 2: periph device address is scsi3addr */ + unsigned int log_unit, + __u8 page_code, unsigned char *scsi3addr, int cmd_type) +{ + CommandList_struct *c; + int status; + + c = cmd_alloc(hba[ctlr], 1); + if (!c) { + printk(KERN_WARNING "cciss: unable to get memory"); + return IO_ERROR; + } + status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, + log_unit, page_code, scsi3addr, cmd_type); + if (status == IO_OK) + status = sendcmd_core(hba[ctlr], c); + cmd_free(hba[ctlr], c, 1); return status; } -- cgit v1.2.3-18-g5258 From 88f627ae394eadd75ada669904269f1a4a77b3bd Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Tue, 2 Jun 2009 14:48:11 +0200 Subject: cciss: fix SCSI device reset handler Fix the SCSI reset error handler to send a working, properly addressed reset message to the target device and add code to wait for the target device to become ready by polling it with Test Unit Ready. The existing reset code was broken in that it didn't bother to set the 8-byte LUN address to anything besides zero, so the command was addressed to the controller, which pretended to the driver that the command succeeded, while doing nothing. Ages ago I tested this code, but unbeknownst to me, my test was flawed, and what I thought was a tape drive getting reset was actually nothing of the sort. Unfortunately, there is still lots of Smartarray firmware that doesn't handle doing target resets right, and this code won't help in those cases, but it also shouldn't make things worse in those cases than they already are. Signed-off-by: Stephen M. Cameron Cc: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 14 ++++++-- drivers/block/cciss_scsi.c | 85 ++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 90 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 8d0f8932fee..cb43fb3af15 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1974,6 +1974,13 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; break; + case TEST_UNIT_READY: + memcpy(c->Header. LUN.LunAddrBytes, scsi3addr, 8); + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; default: printk(KERN_WARNING "cciss%d: Unknown Command 0x%c\n", ctlr, cmd); @@ -1992,13 +1999,14 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ memcpy(&c->Request.CDB[4], buff, 8); break; case 1: /* RESET message */ - c->Request.CDBLen = 12; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + c->Request.CDBLen = 16; c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_WRITE; + c->Request.Type.Direction = XFER_NONE; c->Request.Timeout = 0; memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); c->Request.CDB[0] = cmd; /* reset */ - c->Request.CDB[1] = 0x04; /* reset a LUN */ + c->Request.CDB[1] = 0x03; /* reset a target */ break; case 3: /* No-Op message */ c->Request.CDBLen = 1; diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index a3fd87b4144..8575c48c891 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -58,6 +58,18 @@ static int sendcmd( unsigned char *scsi3addr, int cmd_type); +static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, + size_t size, + unsigned int use_unit_num, /* 0: address the controller, + 1: address logical volume log_unit, + 2: periph device address is scsi3addr */ + unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c); + +static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool); +static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool); static int cciss_scsi_proc_info( struct Scsi_Host *sh, @@ -1575,6 +1587,68 @@ cciss_seq_tape_report(struct seq_file *seq, int ctlr) CPQ_TAPE_UNLOCK(ctlr, flags); } +static int wait_for_device_to_become_ready(ctlr_info_t *h, + unsigned char lunaddr[]) +{ + int rc; + int count = 0; + int waittime = HZ; + CommandList_struct *c; + + c = cmd_alloc(h, 1); + if (!c) { + printk(KERN_WARNING "cciss%d: out of memory in " + "wait_for_device_to_become_ready.\n", h->ctlr); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < 20) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < (HZ * 30)) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, 0, 0, + lunaddr, TYPE_CMD); + if (rc == 0) { + rc = sendcmd_core(h, c); + /* sendcmd turned off interrupts, turn 'em back on. */ + h->access.set_intr_mask(h, CCISS_INTR_ON); + } + + if (rc == 0 && c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (rc == 0 && + c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + printk(KERN_WARNING "cciss%d: Waiting %d secs " + "for device to become ready.\n", + h->ctlr, waittime / HZ); + rc = 1; /* device not ready. */ + } + + if (rc) + printk("cciss%d: giving up on device.\n", h->ctlr); + else + printk(KERN_WARNING "cciss%d: device is ready.\n", h->ctlr); + + cmd_free(h, c, 1); + return rc; +} /* Need at least one of these error handlers to keep ../scsi/hosts.c from * complaining. Doing a host- or bus-reset can't do anything good here. @@ -1591,6 +1665,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) { int rc; CommandList_struct *cmd_in_trouble; + unsigned char lunaddr[8]; ctlr_info_t **c; int ctlr; @@ -1600,19 +1675,17 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return FAILED; ctlr = (*c)->ctlr; printk(KERN_WARNING "cciss%d: resetting tape drive or medium changer.\n", ctlr); - /* find the command that's giving us trouble */ cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble; - if (cmd_in_trouble == NULL) { /* paranoia */ + if (cmd_in_trouble == NULL) /* paranoia */ return FAILED; - } + memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8); /* send a reset to the SCSI LUN which the command was sent to */ - rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, - (unsigned char *) &cmd_in_trouble->Header.LUN.LunAddrBytes[0], + rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, lunaddr, TYPE_MSG); /* sendcmd turned off interrupts on the board, turn 'em back on. */ (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); - if (rc == 0) + if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0) return SUCCESS; printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr); return FAILED; -- cgit v1.2.3-18-g5258 From 7fe063268e73681cdca1a6496a25f93d3332f517 Mon Sep 17 00:00:00 2001 From: Andrew Patterson Date: Tue, 2 Jun 2009 14:48:39 +0200 Subject: cciss: add cciss driver sysfs entries Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices//ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices//ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller Cc: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 267 +++++++++++++++++++++++++++++++++++++++++++++++++- drivers/block/cciss.h | 24 +++-- 2 files changed, 281 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index cb43fb3af15..e7d00952dd4 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -437,6 +437,194 @@ static void __devinit cciss_procinit(int i) } #endif /* CONFIG_PROC_FS */ +#define MAX_PRODUCT_NAME_LEN 19 + +#define to_hba(n) container_of(n, struct ctlr_info, dev) +#define to_drv(n) container_of(n, drive_info_struct, dev) + +static struct device_type cciss_host_type = { + .name = "cciss_host", +}; + +static ssize_t dev_show_unique_id(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + __u8 sn[16]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(sn, drv->serial_no, sizeof(sn)); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + + if (ret) + return ret; + else + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} +DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); + +static ssize_t dev_show_vendor(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char vendor[VENDOR_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(vendor, drv->vendor, VENDOR_LEN + 1); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); +} +DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); + +static ssize_t dev_show_model(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char model[MODEL_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(model, drv->model, MODEL_LEN + 1); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); +} +DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); + +static ssize_t dev_show_rev(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + char rev[REV_LEN + 1]; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) + ret = -EBUSY; + else + memcpy(rev, drv->rev, REV_LEN + 1); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + + if (ret) + return ret; + else + return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); +} +DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); + +static struct attribute *cciss_dev_attrs[] = { + &dev_attr_unique_id.attr, + &dev_attr_model.attr, + &dev_attr_vendor.attr, + &dev_attr_rev.attr, + NULL +}; + +static struct attribute_group cciss_dev_attr_group = { + .attrs = cciss_dev_attrs, +}; + +static struct attribute_group *cciss_dev_attr_groups[] = { + &cciss_dev_attr_group, + NULL +}; + +static struct device_type cciss_dev_type = { + .name = "cciss_device", + .groups = cciss_dev_attr_groups, +}; + +static struct bus_type cciss_bus_type = { + .name = "cciss", +}; + + +/* + * Initialize sysfs entry for each controller. This sets up and registers + * the 'cciss#' directory for each individual controller under + * /sys/bus/pci/devices//. + */ +static int cciss_create_hba_sysfs_entry(struct ctlr_info *h) +{ + device_initialize(&h->dev); + h->dev.type = &cciss_host_type; + h->dev.bus = &cciss_bus_type; + dev_set_name(&h->dev, "%s", h->devname); + h->dev.parent = &h->pdev->dev; + + return device_add(&h->dev); +} + +/* + * Remove sysfs entries for an hba. + */ +static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) +{ + device_del(&h->dev); +} + +/* + * Initialize sysfs for each logical drive. This sets up and registers + * the 'c#d#' directory for each individual logical drive under + * /sys/bus/pci/devices/dev); + drv->dev.type = &cciss_dev_type; + drv->dev.bus = &cciss_bus_type; + dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index); + drv->dev.parent = &h->dev; + return device_add(&drv->dev); +} + +/* + * Remove sysfs entries for a logical drive. + */ +static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv) +{ + device_del(&drv->dev); +} + /* * For operations that cannot sleep, a command block is allocated at init, * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track @@ -1332,6 +1520,45 @@ static void cciss_softirq_done(struct request *rq) spin_unlock_irqrestore(&h->lock, flags); } +/* This function gets the SCSI vendor, model, and revision of a logical drive + * via the inquiry page 0. Model, vendor, and rev are set to empty strings if + * they cannot be read. + */ +static void cciss_get_device_descr(int ctlr, int logvol, int withirq, + char *vendor, char *model, char *rev) +{ + int rc; + InquiryData_struct *inq_buf; + + *vendor = '\0'; + *model = '\0'; + *rev = '\0'; + + inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL); + if (!inq_buf) + return; + + if (withirq) + rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, + sizeof(InquiryData_struct), 1, logvol, + 0, TYPE_CMD); + else + rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf, + sizeof(InquiryData_struct), 1, logvol, 0, NULL, + TYPE_CMD); + if (rc == IO_OK) { + memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN); + vendor[VENDOR_LEN] = '\0'; + memcpy(model, &inq_buf->data_byte[16], MODEL_LEN); + model[MODEL_LEN] = '\0'; + memcpy(rev, &inq_buf->data_byte[32], REV_LEN); + rev[REV_LEN] = '\0'; + } + + kfree(inq_buf); + return; +} + /* This function gets the serial number of a logical drive via * inquiry page 0x83. Serial no. is 16 bytes. If the serial * number cannot be had, for whatever reason, 16 bytes of 0xff @@ -1372,7 +1599,7 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, disk->first_minor = drv_index << NWD_SHIFT; disk->fops = &cciss_fops; disk->private_data = &h->drv[drv_index]; - disk->driverfs_dev = &h->pdev->dev; + disk->driverfs_dev = &h->drv[drv_index].dev; /* Set up queue information */ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); @@ -1463,6 +1690,8 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) drvinfo->block_size = block_size; drvinfo->nr_blocks = total_size + 1; + cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor, + drvinfo->model, drvinfo->rev); cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no, sizeof(drvinfo->serial_no)); @@ -1512,6 +1741,9 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) h->drv[drv_index].cylinders = drvinfo->cylinders; h->drv[drv_index].raid_level = drvinfo->raid_level; memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16); + memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1); + memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1); + memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1); ++h->num_luns; disk = h->gendisk[drv_index]; @@ -1586,6 +1818,8 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) } } h->drv[drv_index].LunID = lunid; + if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index)) + goto err_free_disk; /* Don't need to mark this busy because nobody */ /* else knows about this disk yet to contend */ @@ -1593,6 +1827,11 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) h->drv[drv_index].busy_configuring = 0; wmb(); return drv_index; + +err_free_disk: + put_disk(h->gendisk[drv_index]); + h->gendisk[drv_index] = NULL; + return -1; } /* This is for the special case of a controller which @@ -1713,6 +1952,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) h->drv[i].busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); return_code = deregister_disk(h, i, 1); + cciss_destroy_ld_sysfs_entry(&h->drv[i]); h->drv[i].busy_configuring = 0; } } @@ -3719,12 +3959,15 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, INIT_HLIST_HEAD(&hba[i]->reqQ); if (cciss_pci_init(hba[i], pdev) != 0) - goto clean1; + goto clean0; sprintf(hba[i]->devname, "cciss%d", i); hba[i]->ctlr = i; hba[i]->pdev = pdev; + if (cciss_create_hba_sysfs_entry(hba[i])) + goto clean0; + /* configure PCI DMA stuff */ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) dac = 1; @@ -3868,6 +4111,8 @@ clean4: clean2: unregister_blkdev(hba[i]->major, hba[i]->devname); clean1: + cciss_destroy_hba_sysfs_entry(hba[i]); +clean0: hba[i]->busy_initializing = 0; /* cleanup any queues that may have been initialized */ for (j=0; j <= hba[i]->highest_lun; j++){ @@ -3978,6 +4223,7 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) */ pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); + cciss_destroy_hba_sysfs_entry(hba[i]); free_hba(i); } @@ -3995,6 +4241,8 @@ static struct pci_driver cciss_pci_driver = { */ static int __init cciss_init(void) { + int err; + /* * The hardware requires that commands are aligned on a 64-bit * boundary. Given that we use pci_alloc_consistent() to allocate an @@ -4004,8 +4252,20 @@ static int __init cciss_init(void) printk(KERN_INFO DRIVER_NAME "\n"); + err = bus_register(&cciss_bus_type); + if (err) + return err; + /* Register for our PCI devices */ - return pci_register_driver(&cciss_pci_driver); + err = pci_register_driver(&cciss_pci_driver); + if (err) + goto err_bus_register; + + return 0; + +err_bus_register: + bus_unregister(&cciss_bus_type); + return err; } static void __exit cciss_cleanup(void) @@ -4022,6 +4282,7 @@ static void __exit cciss_cleanup(void) } } remove_proc_entry("driver/cciss", NULL); + bus_unregister(&cciss_bus_type); } static void fail_all_cmds(unsigned long ctlr) diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index 703e08038fb..dd1926d8cd9 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -12,6 +12,10 @@ #define IO_OK 0 #define IO_ERROR 1 +#define VENDOR_LEN 8 +#define MODEL_LEN 16 +#define REV_LEN 4 + struct ctlr_info; typedef struct ctlr_info ctlr_info_t; @@ -34,13 +38,18 @@ typedef struct _drive_info_struct int cylinders; int raid_level; /* set to -1 to indicate that * the drive is not in use/configured - */ - int busy_configuring; /*This is set when the drive is being removed - *to prevent it from being opened or it's queue - *from being started. - */ - __u8 serial_no[16]; /* from inquiry page 0x83, */ - /* not necc. null terminated. */ + */ + int busy_configuring; /* This is set when a drive is being removed + * to prevent it from being opened or it's + * queue from being started. + */ + struct device dev; + __u8 serial_no[16]; /* from inquiry page 0x83, + * not necc. null terminated. + */ + char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */ + char model[MODEL_LEN + 1]; /* SCSI model string */ + char rev[REV_LEN + 1]; /* SCSI revision string */ } drive_info_struct; #ifdef CONFIG_CISS_SCSI_TAPE @@ -123,6 +132,7 @@ struct ctlr_info unsigned char alive; struct completion *rescan_wait; struct task_struct *cciss_scan_thread; + struct device dev; }; /* Defining the diffent access_menthods */ -- cgit v1.2.3-18-g5258 From 77b0308a0778861111184e097533000f7a458c37 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Jun 2009 14:51:30 +0200 Subject: cciss: use schedule_timeout_interruptible() Use schedule_timeout_interruptible() instead of open-coding the set and schedule parts. Cc: Mike Miller Cc: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 8575c48c891..2edfc9b644e 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1608,8 +1608,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h, /* Wait for a bit. do this first, because if we send * the TUR right away, the reset will just abort it. */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(waittime); + schedule_timeout_interruptible(waittime); count++; /* Increase wait time with each try, up to a point. */ -- cgit v1.2.3-18-g5258 From d3ae33efb8e2f277f9007eb060c9d0b91ab38ae1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 2 Jun 2009 12:34:31 +0100 Subject: pata_netcell: LBA48 force identify bits correct This matches Bartlomiej's patch for ide_pci_generic: c339dfdd65b52bfd947ab29d1210314a2f6d622d In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/ata/pata_netcell.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index bdb236957cb..9a698097134 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -20,13 +20,24 @@ /* No PIO or DMA methods needed for this device */ +static unsigned int netcell_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) +{ + unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); + /* Firmware forgets to mark words 85-87 valid */ + if (err_mask == 0) + id[ATA_ID_CSF_DEFAULT] |= 0x0400; + return err_mask; +} + static struct scsi_host_template netcell_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations netcell_ops = { .inherits = &ata_bmdma_port_ops, - .cable_detect = ata_cable_80wire, + .cable_detect = ata_cable_80wire, + .read_id = netcell_read_id, }; -- cgit v1.2.3-18-g5258 From 05ad709d04799125ed85dd816fdb558258102172 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 2 Jun 2009 16:58:10 +0100 Subject: parport: quickfix the proc registration bug Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/share.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/share.c b/drivers/parport/share.c index 0ebca450ed2..dffa5d4fb29 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -614,7 +614,10 @@ parport_register_device(struct parport *port, const char *name, * pardevice fields. -arca */ port->ops->init_state(tmp, tmp->state); - parport_device_proc_register(tmp); + if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) { + port->proc_device = tmp; + parport_device_proc_register(tmp); + } return tmp; out_free_all: @@ -646,10 +649,14 @@ void parport_unregister_device(struct pardevice *dev) } #endif - parport_device_proc_unregister(dev); - port = dev->port->physport; + if (port->proc_device == dev) { + port->proc_device = NULL; + clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags); + parport_device_proc_unregister(dev); + } + if (port->cad == dev) { printk(KERN_DEBUG "%s: %s forgot to release port\n", port->name, dev->name); -- cgit v1.2.3-18-g5258 From a05c0205ba031c01bba33a21bf0a35920eb64833 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 3 Jun 2009 09:33:18 +0200 Subject: block: Fix bounce limit setting in DM blk_queue_bounce_limit() is more than a wrapper about the request queue limits.bounce_pfn variable. Introduce blk_queue_bounce_pfn() which can be called by stacking drivers that wish to set the bounce limit explicitly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/md/dm-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index e9a73bb242b..3ca1604ddd5 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -920,7 +920,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) blk_queue_max_segment_size(q, t->limits.max_segment_size); blk_queue_max_hw_sectors(q, t->limits.max_hw_sectors); blk_queue_segment_boundary(q, t->limits.seg_boundary_mask); - blk_queue_bounce_limit(q, t->limits.bounce_pfn); + blk_queue_bounce_pfn(q, t->limits.bounce_pfn); if (t->limits.no_cluster) queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q); -- cgit v1.2.3-18-g5258 From e76afc4e7816a0a5300073098cdac93a994eb5ca Mon Sep 17 00:00:00 2001 From: Eric Lammerts Date: Tue, 19 May 2009 20:53:20 -0400 Subject: fix oops when using console=ttymxcN with N > 0 Signed-off-by: Eric Lammerts Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 9f460b175c5..5f0be40dfda 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1031,6 +1031,8 @@ imx_console_setup(struct console *co, char *options) if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) co->index = 0; sport = imx_ports[co->index]; + if(sport == NULL) + return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); -- cgit v1.2.3-18-g5258 From c499b0672f8df9379764965c5ec124751699d7c4 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 3 Apr 2009 14:41:56 +0200 Subject: mxcmmc: decrease minimum frequency to make MMC cards work This is a temporary workaround until the MMC stack can be fixed. Signed-off-by: Sascha Hauer Signed-off-by: Pierre Ossman --- drivers/mmc/host/mxcmmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index b4a615c55f2..5950102113f 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -724,7 +724,9 @@ static int mxcmci_probe(struct platform_device *pdev) goto out_clk_put; } - mmc->f_min = clk_get_rate(host->clk) >> 7; + mmc->f_min = clk_get_rate(host->clk) >> 16; + if (mmc->f_min < 400000) + mmc->f_min = 400000; mmc->f_max = clk_get_rate(host->clk) >> 1; /* recommended in data sheet */ -- cgit v1.2.3-18-g5258 From 85b843227a9b8c1a27ebd354a80c89aef067f2ca Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Wed, 15 Apr 2009 17:44:58 +0530 Subject: omap_hsmmc: Trivial fix for a typo in comment Signed-off-by: Anand Gadiyar Signed-off-by: Pierre Ossman --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e62a22a7f00..c40cb96255a 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -680,7 +680,7 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) host->dma_ch = -1; /* * DMA Callback: run in interrupt context. - * mutex_unlock will through a kernel warning if used. + * mutex_unlock will throw a kernel warning if used. */ up(&host->sem); } -- cgit v1.2.3-18-g5258 From 18489fa2ba4c170d96ffc1a41f7b9002dcb983b7 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 16 Apr 2009 22:00:36 +0200 Subject: mxcmmc : Reset the SDHC hardware if software timeout occurs. When a software timeout occurs in polling mode hardware was left in an indeterminate state causing subsequent operations to block. Signed-off-by: Martin Fuzzey --- drivers/mmc/host/mxcmmc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 5950102113f..dcc9cdb2a4d 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -140,6 +140,8 @@ struct mxcmci_host { struct work_struct datawork; }; +static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); + static inline int mxcmci_use_dma(struct mxcmci_host *host) { return host->do_dma; @@ -345,8 +347,11 @@ static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) stat = readl(host->base + MMC_REG_STATUS); if (stat & STATUS_ERR_MASK) return stat; - if (time_after(jiffies, timeout)) + if (time_after(jiffies, timeout)) { + mxcmci_softreset(host); + mxcmci_set_clk_rate(host, host->clock); return STATUS_TIME_OUT_READ; + } if (stat & mask) return 0; cpu_relax(); -- cgit v1.2.3-18-g5258 From 656217d28480f63313a488f6973980f9fbb921a1 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 16 Apr 2009 22:00:41 +0200 Subject: mxcmmc: Fix missing return value checking in DMA setup code. Signed-off-by: Martin Fuzzey --- drivers/mmc/host/mxcmmc.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index dcc9cdb2a4d..f4cbe473670 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -162,7 +162,7 @@ static void mxcmci_softreset(struct mxcmci_host *host) writew(0xff, host->base + MMC_REG_RES_TO); } -static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; unsigned int blksz = data->blksz; @@ -170,6 +170,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) #ifdef HAS_DMA struct scatterlist *sg; int i; + int ret; #endif if (data->flags & MMC_DATA_STREAM) nob = 0xffff; @@ -185,7 +186,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->offset & 3 || sg->length & 3) { host->do_dma = 0; - return; + return 0; } } @@ -194,23 +195,30 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); - imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_READ); + ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, + datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); } else { host->dma_dir = DMA_TO_DEVICE; host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); - imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_WRITE); + ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, + datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); } + if (ret) { + dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret); + return ret; + } wmb(); imx_dma_enable(host->dma); #endif /* HAS_DMA */ + return 0; } static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, @@ -536,6 +544,7 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) { struct mxcmci_host *host = mmc_priv(mmc); unsigned int cmdat = host->cmdat; + int error; WARN_ON(host->req != NULL); @@ -545,7 +554,12 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) host->do_dma = 1; #endif if (req->data) { - mxcmci_setup_data(host, req->data); + error = mxcmci_setup_data(host, req->data); + if (error) { + req->cmd->error = error; + goto out; + } + cmdat |= CMD_DAT_CONT_DATA_ENABLE; @@ -553,7 +567,9 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) cmdat |= CMD_DAT_CONT_WRITE; } - if (mxcmci_start_cmd(host, req->cmd, cmdat)) + error = mxcmci_start_cmd(host, req->cmd, cmdat); +out: + if (error) mxcmci_finish_request(host, req); } -- cgit v1.2.3-18-g5258 From 703aaced2b9c9a98285f265f3444c2f89d9d4d19 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 9 May 2009 01:03:52 -0400 Subject: mvsdio: allow automatic loading when modular Signed-off-by: Nicolas Pitre Tested-by: Martin Michlmayr Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index c643d0fe118..1783043a26a 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -882,3 +882,4 @@ module_param(nodma, int, 0); MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre"); MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mvsdio"); -- cgit v1.2.3-18-g5258 From 992697e9b342115dcf052ffa41d418cb4fe1a841 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 8 May 2009 08:52:49 -0500 Subject: sdhci-of: Add fsl,esdhc as a valid compatible to bind against We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it. Signed-off-by: Kumar Gala Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-of.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 3ff4ac3abe8..09cc597c631 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -277,6 +277,7 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev) static const struct of_device_id sdhci_of_match[] = { { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, + { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, { .compatible = "generic-sdhci", }, {}, }; -- cgit v1.2.3-18-g5258 From e749c6f21fd7dc618f61dd178b4ee739c3cb1c31 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 16 Apr 2009 15:55:21 +1000 Subject: mmc/omap: Use disable_irq_nosync() from within irq handlers. disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman --- drivers/mmc/host/omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index bfa25c01c87..dceb5ee3bda 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -822,7 +822,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) del_timer(&host->cmd_abort_timer); host->abort = 1; OMAP_MMC_WRITE(host, IE, 0); - disable_irq(host->irq); + disable_irq_nosync(host->irq); schedule_work(&host->cmd_abort_work); return IRQ_HANDLED; } -- cgit v1.2.3-18-g5258 From 9ca6944cbfad11f2368cf10292e7f3eb036386c2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 14 May 2009 21:28:05 -0400 Subject: mvsdio: ignore high speed timing requests from the core Empirical evidences show that this is causing far more problems than it solves when this mode is enabled in the host hardware. Amongst those cards that are known to be non functional when this bit is set are: A-Data "Speedy" 2GB SD card Kodak 512MB SD card Ativa 1GB MicroSD card Marvell 8688 (WIFI/Bluetooth) SDIO card Since those cards do work on other host controllers which do honnor the hs timing, the issue must be with this particular host hardware. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 1783043a26a..9d3cfa9909c 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -620,9 +620,18 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_width == MMC_BUS_WIDTH_4) ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS; + /* + * The HI_SPEED_EN bit is causing trouble with many (but not all) + * high speed SD, SDHC and SDIO cards. Not enabling that bit + * makes all cards work. So let's just ignore that bit for now + * and revisit this issue if problems for not enabling this bit + * are ever reported. + */ +#if 0 if (ios->timing == MMC_TIMING_MMC_HS || ios->timing == MMC_TIMING_SD_HS) ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN; +#endif host->ctrl = ctrl_reg; mvsd_write(MVSD_HOST_CTRL, ctrl_reg); -- cgit v1.2.3-18-g5258 From a6d297f008e124d0bb4312369191b012c10a1a4e Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 26 May 2009 22:35:34 -0400 Subject: mvsdio: fix config failure with some high speed SDHC cards Especially with Sandisk SDHC cards, the second SWITCH command was failing with a timeout and the card was not recognized at all. However if the system was busy, or debugging was enabled, or a udelay(100) was inserted before the second SWITCH command in the core code, then the timing was so that the card started to work. With some unusual block sizes, the data FIFO status doesn't indicate a "empty" state right away when the data transfer is done. Queuing another data transfer in that condition results in a transfer timeout. The empty FIFO bit eventually get set by itself in less than 50 usecs when it is not set right away. So let's just poll for that bit before configuring the controller with a new data transfer. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 9d3cfa9909c..b56d72ff06e 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -64,6 +64,31 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) unsigned int tmout; int tmout_index; + /* + * Hardware weirdness. The FIFO_EMPTY bit of the HW_STATE + * register is sometimes not set before a while when some + * "unusual" data block sizes are used (such as with the SWITCH + * command), even despite the fact that the XFER_DONE interrupt + * was raised. And if another data transfer starts before + * this bit comes to good sense (which eventually happens by + * itself) then the new transfer simply fails with a timeout. + */ + if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) { + unsigned long t = jiffies + HZ; + unsigned int hw_state, count = 0; + do { + if (time_after(jiffies, t)) { + dev_warn(host->dev, "FIFO_EMPTY bit missing\n"); + break; + } + hw_state = mvsd_read(MVSD_HW_STATE); + count++; + } while (!(hw_state & (1 << 13))); + dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit " + "(hw=0x%04x, count=%d, jiffies=%ld)\n", + hw_state, count, jiffies - (t - HZ)); + } + /* If timeout=0 then maximum timeout index is used. */ tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk); tmout += data->timeout_clks; -- cgit v1.2.3-18-g5258 From fbf6a5fcbcc2248f1e676f7a0a7d49cd4b535d2a Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 6 May 2009 18:40:07 +0800 Subject: sdhci-of: Fix the wrong accessor to HOSTVER register Freescale eSDHC controller has the special order for the HOST version register. that is not same as the other's registers. The address of HOSTVER in spec is 0xFE, and we need use the in_be16(0xFE) to access it, not in_be16(0xFC). Signed-off-by: Dave Liu Acked-by: Anton Vorontsov Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-of.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 09cc597c631..128c614d11a 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -55,7 +55,13 @@ static u32 esdhc_readl(struct sdhci_host *host, int reg) static u16 esdhc_readw(struct sdhci_host *host, int reg) { - return in_be16(host->ioaddr + (reg ^ 0x2)); + u16 ret; + + if (unlikely(reg == SDHCI_HOST_VERSION)) + ret = in_be16(host->ioaddr + reg); + else + ret = in_be16(host->ioaddr + (reg ^ 0x2)); + return ret; } static u8 esdhc_readb(struct sdhci_host *host, int reg) -- cgit v1.2.3-18-g5258 From b8da7de56ca0ad34726478a50d138a29a9ff76cb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 2 Jun 2009 16:50:35 +1000 Subject: drm: fix irq naming for kms drivers. allocating devname in the i915 driver was a hack originally and I forgot to figure out how to do this properly back then. So this is the cleaner version that just picks devname or driver name in the irq code. It removes the devname allocs from the i915 driver. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 8 +++++++- drivers/gpu/drm/i915/i915_dma.c | 12 ++---------- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 93e677a481f..fc8e5acd9d9 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -196,6 +196,7 @@ int drm_irq_install(struct drm_device *dev) { int ret = 0; unsigned long sh_flags = 0; + char *irqname; if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return -EINVAL; @@ -227,8 +228,13 @@ int drm_irq_install(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED)) sh_flags = IRQF_SHARED; + if (dev->devname) + irqname = dev->devname; + else + irqname = dev->driver->name; + ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler, - sh_flags, dev->devname, dev); + sh_flags, irqname, dev); if (ret < 0) { mutex_lock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 53d54455262..0ccb63ee50e 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -987,12 +987,6 @@ static int i915_load_modeset_init(struct drm_device *dev) int fb_bar = IS_I9XX(dev) ? 2 : 0; int ret = 0; - dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL); - if (!dev->devname) { - ret = -ENOMEM; - goto out; - } - dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; @@ -1006,7 +1000,7 @@ static int i915_load_modeset_init(struct drm_device *dev) ret = i915_probe_agp(dev, &agp_size, &prealloc_size); if (ret) - goto kfree_devname; + goto out; /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); @@ -1024,7 +1018,7 @@ static int i915_load_modeset_init(struct drm_device *dev) ret = i915_gem_init_ringbuffer(dev); if (ret) - goto kfree_devname; + goto out; /* Allow hardware batchbuffers unless told otherwise. */ @@ -1056,8 +1050,6 @@ static int i915_load_modeset_init(struct drm_device *dev) destroy_ringbuffer: i915_gem_cleanup_ringbuffer(dev); -kfree_devname: - kfree(dev->devname); out: return ret; } -- cgit v1.2.3-18-g5258 From 9863871bd1bbf218b921af5e0bc48ca4f6ea9f12 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 4 Jun 2009 07:08:13 +1000 Subject: drm/radeon: fix ring free alignment calculations fd.o bz#21849 We were aligning to +16 dwords, instead of to the next 16dword boundary in the ring. Fix the calculation to go to the next 16dword boundary when space checking. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 4 ++-- drivers/gpu/drm/radeon/radeon_drv.h | 5 ++++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 77a7a4d8465..aff90bb9648 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2185,9 +2185,9 @@ void radeon_commit_ring(drm_radeon_private_t *dev_priv) /* check if the ring is padded out to 16-dword alignment */ - tail_aligned = dev_priv->ring.tail & 0xf; + tail_aligned = dev_priv->ring.tail & (RADEON_RING_ALIGN-1); if (tail_aligned) { - int num_p2 = 16 - tail_aligned; + int num_p2 = RADEON_RING_ALIGN - tail_aligned; ring = dev_priv->ring.start; /* pad with some CP_PACKET2 */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 8071d965f14..0c6bfc1de15 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -1964,11 +1964,14 @@ do { \ #define RING_LOCALS int write, _nr, _align_nr; unsigned int mask; u32 *ring; +#define RADEON_RING_ALIGN 16 + #define BEGIN_RING( n ) do { \ if ( RADEON_VERBOSE ) { \ DRM_INFO( "BEGIN_RING( %d )\n", (n)); \ } \ - _align_nr = (n + 0xf) & ~0xf; \ + _align_nr = RADEON_RING_ALIGN - ((dev_priv->ring.tail + n) & (RADEON_RING_ALIGN-1)); \ + _align_nr += n; \ if (dev_priv->ring.space <= (_align_nr * sizeof(u32))) { \ COMMIT_RING(); \ radeon_wait_ring( dev_priv, _align_nr * sizeof(u32)); \ -- cgit v1.2.3-18-g5258 From 75185c929ed241f5cf1aa28999b8012181e2c7cb Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:25 -0700 Subject: drm: add newlines to text sysfs files The contents of various simple text files in sysfs should end with a newline to make them easier to read from the console. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 8f9372921f8..182bdf99cf7 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -147,7 +147,7 @@ static ssize_t status_show(struct device *device, enum drm_connector_status status; status = connector->funcs->detect(connector); - return snprintf(buf, PAGE_SIZE, "%s", + return snprintf(buf, PAGE_SIZE, "%s\n", drm_get_connector_status_name(status)); } @@ -166,7 +166,7 @@ static ssize_t dpms_show(struct device *device, if (ret) return 0; - return snprintf(buf, PAGE_SIZE, "%s", + return snprintf(buf, PAGE_SIZE, "%s\n", drm_get_dpms_name((int)dpms_status)); } @@ -176,7 +176,7 @@ static ssize_t enabled_show(struct device *device, { struct drm_connector *connector = to_drm_connector(device); - return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" : + return snprintf(buf, PAGE_SIZE, "%s\n", connector->encoder ? "enabled" : "disabled"); } -- cgit v1.2.3-18-g5258 From e36ebaf49274ffa78f17b62bcae4c92c33b5b391 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:26 -0700 Subject: drm: set permissions on edid file to 0444 Without initializing the sysfs attributes for the edid file, it was created with mode 0, making it difficult for applications to use. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 182bdf99cf7..9987ab88083 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -317,6 +317,7 @@ static struct device_attribute connector_attrs_opt1[] = { static struct bin_attribute edid_attr = { .attr.name = "edid", + .attr.mode = 0444, .size = 128, .read = edid_show, }; -- cgit v1.2.3-18-g5258 From c9fb15f60eb517c958dec64dca9357bf62bf2201 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:28 -0700 Subject: drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms. Making the drm_crtc.c code recognize the DPMS property and invoke the connector->dpms function doesn't remove any capability from the driver while reducing code duplication. That just highlighted the problem with the existing DPMS functions which could turn off the connector, but failed to turn off any relevant crtcs. The new drm_helper_connector_dpms function manages all of that, using the drm_helper-specific crtc and encoder dpms functions, automatically computing the appropriate DPMS level for each object in the system. This fixes the current troubles in the i915 driver which left PLLs, pipes and planes running while in DPMS_OFF mode or even while they were unused. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 7 ++- drivers/gpu/drm/drm_crtc_helper.c | 109 +++++++++++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_crt.c | 6 +-- drivers/gpu/drm/i915/intel_dvo.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lvds.c | 6 +-- drivers/gpu/drm/i915/intel_sdvo.c | 1 + drivers/gpu/drm/i915/intel_tv.c | 1 + 8 files changed, 119 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 94a76887173..8fab7890a36 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2294,7 +2294,12 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, } } - if (connector->funcs->set_property) + /* Do DPMS ourselves */ + if (property == connector->dev->mode_config.dpms_property) { + if (connector->funcs->dpms) + (*connector->funcs->dpms)(connector, (int) out_resp->value); + ret = 0; + } else if (connector->funcs->set_property) ret = connector->funcs->set_property(connector, property, out_resp->value); /* store the property value if succesful */ diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 45890447fee..a6f73f1e99d 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -198,6 +198,29 @@ static void drm_helper_add_std_modes(struct drm_device *dev, } } +/** + * drm_helper_encoder_in_use - check if a given encoder is in use + * @encoder: encoder to check + * + * LOCKING: + * Caller must hold mode config lock. + * + * Walk @encoders's DRM device's mode_config and see if it's in use. + * + * RETURNS: + * True if @encoder is part of the mode_config, false otherwise. + */ +bool drm_helper_encoder_in_use(struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + return true; + return false; +} +EXPORT_SYMBOL(drm_helper_encoder_in_use); + /** * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config * @crtc: CRTC to check @@ -216,7 +239,7 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; /* FIXME: Locking around list access? */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) - if (encoder->crtc == crtc) + if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder)) return true; return false; } @@ -240,7 +263,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { encoder_funcs = encoder->helper_private; - if (!encoder->crtc) + if (!drm_helper_encoder_in_use(encoder)) (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); } @@ -935,6 +958,88 @@ bool drm_helper_initial_config(struct drm_device *dev) } EXPORT_SYMBOL(drm_helper_initial_config); +static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = crtc->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder && connector->encoder->crtc == crtc) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +/** + * drm_helper_connector_dpms + * @connector affected connector + * @mode DPMS mode + * + * Calls the low-level connector DPMS function, then + * calls appropriate encoder and crtc DPMS functions as well + */ +void drm_helper_connector_dpms(struct drm_connector *connector, int mode) +{ + struct drm_encoder *encoder = connector->encoder; + struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; + int old_dpms; + + if (mode == connector->dpms) + return; + + old_dpms = connector->dpms; + connector->dpms = mode; + + /* from off to on, do crtc then encoder */ + if (mode < old_dpms) { + if (crtc) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + if (encoder) { + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + } + } + + /* from on to off, do encoder then crtc */ + if (mode > old_dpms) { + if (encoder) { + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + } + if (crtc) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } + + return; +} +EXPORT_SYMBOL(drm_helper_connector_dpms); + /** * drm_hotplug_stage_two * @dev DRM device diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 640f5158eff..79acc4f4c1f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -381,11 +381,6 @@ static int intel_crt_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { - struct drm_device *dev = connector->dev; - - if (property == dev->mode_config.dpms_property && connector->encoder) - intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf)); - return 0; } @@ -402,6 +397,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { }; static const struct drm_connector_funcs intel_crt_connector_funcs = { + .dpms = drm_helper_connector_dpms, .detect = intel_crt_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = intel_crt_destroy, diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 8b8d6e65cd3..1ee3007d6ec 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -316,6 +316,7 @@ static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { }; static const struct drm_connector_funcs intel_dvo_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_dvo_save, .restore = intel_dvo_restore, .detect = intel_dvo_detect, diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index d0983bb93a1..7d6bdd70532 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -219,6 +219,7 @@ static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = { }; static const struct drm_connector_funcs intel_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_hdmi_save, .restore = intel_hdmi_restore, .detect = intel_hdmi_detect, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 53731f0ffcb..c92a64ac854 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -343,11 +343,6 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { - struct drm_device *dev = connector->dev; - - if (property == dev->mode_config.dpms_property && connector->encoder) - intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf)); - return 0; } @@ -366,6 +361,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs }; static const struct drm_connector_funcs intel_lvds_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_lvds_save, .restore = intel_lvds_restore, .detect = intel_lvds_detect, diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f3ef6bfd8ff..3093b4d4a4d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1616,6 +1616,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { }; static const struct drm_connector_funcs intel_sdvo_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_sdvo_save, .restore = intel_sdvo_restore, .detect = intel_sdvo_detect, diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index d2c32983242..98ac0546b7b 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1626,6 +1626,7 @@ static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = { }; static const struct drm_connector_funcs intel_tv_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_tv_save, .restore = intel_tv_restore, .detect = intel_tv_detect, -- cgit v1.2.3-18-g5258 From 93c05f222413e3a16e8785f252db4726693abd71 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 4 Jun 2009 09:41:19 +1000 Subject: drm/i915: intel_lvds.c fix section mismatch intel_no_lvds[] does not require __initdata as it is used only by void intel_lvds_init(struct drm_device *dev). Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index c92a64ac854..53cccfa58b9 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -387,7 +387,7 @@ static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) } /* These systems claim to have LVDS, but really don't */ -static const struct dmi_system_id __initdata intel_no_lvds[] = { +static const struct dmi_system_id intel_no_lvds[] = { { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", -- cgit v1.2.3-18-g5258 From 6c51d1cfa0a370b48a157163340190cf5fd2346b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 26 May 2009 10:35:52 +1000 Subject: drm: don't associate _DRM_DRIVER maps with a master A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_bufs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 0411d912d82..80a257554b3 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -371,7 +371,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); - list->master = dev->primary->master; + if (!(map->flags & _DRM_DRIVER)) + list->master = dev->primary->master; *maplist = list; return 0; } -- cgit v1.2.3-18-g5258 From fc43896630a421321a19d7970bac27ac94e9d162 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Thu, 4 Jun 2009 10:20:34 +1000 Subject: drm: ignore EDID with really tiny modes. Some EDIDs lie and report tiny modes that aren't possible. Ignore these modes. Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ca9c6165671..6f6b26479d8 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -289,6 +289,11 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, struct drm_display_mode *mode; struct detailed_pixel_timing *pt = &timing->data.pixel_data; + /* ignore tiny modes */ + if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 || + ((pt->vactive_hi << 8) | pt->hactive_lo) < 64) + return NULL; + if (pt->stereo) { printk(KERN_WARNING "stereo mode not supported\n"); return NULL; -- cgit v1.2.3-18-g5258 From f79b1b146b52765ee38bfb91bb14eb850fa98017 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 28 May 2009 00:25:05 +0800 Subject: PCI: use fixed-up device class when configuring device The device class may be changed after the fixup, so re-read the class value from pci_dev when configuring the device. Otherwise some devices such as JMicron SATA controller won't work. Reviewed-by: Matthew Wilcox Reviewed-by: Grant Grundler Tested-by: Marc Dionne Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e3c3e081b83..f1ae2475fff 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -745,6 +745,8 @@ int pci_setup_device(struct pci_dev *dev) /* Early fixups, before probing the BARs */ pci_fixup_device(pci_fixup_early, dev); + /* device class may be changed after fixup */ + class = dev->class >> 8; switch (dev->hdr_type) { /* header type */ case PCI_HEADER_TYPE_NORMAL: /* standard header */ -- cgit v1.2.3-18-g5258 From 0e7ddf7eeeef5aea85412120539ab5369577faeb Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 4 Jun 2009 11:18:14 +0000 Subject: drm/i915: Remove a bad BUG_ON in the fence management code. This could be triggered by a gtt mapping fault on 965 that decides to remove the fence from another object that happens to be active currently. Since the other object doesn't rely on the fence reg for its execution, we don't wait for it to finish. We'll soon be not waiting on 915 most of the time as well, so just drop the BUG_ON. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 670d1288146..39f5c658ef5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2260,9 +2260,6 @@ try_again: goto try_again; } - BUG_ON(old_obj_priv->active || - (reg->obj->write_domain & I915_GEM_GPU_DOMAINS)); - /* * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. -- cgit v1.2.3-18-g5258 From 730c586ad5228c339949b2eb4e72b80ae167abc4 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Thu, 4 Jun 2009 15:20:39 -0700 Subject: drivers/char/mem.c: avoid OOM lockup during large reads from /dev/zero While running 20 parallel instances of dd as follows: #!/bin/bash for i in `seq 1 20`; do dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 & done wait on a 16G machine, we noticed that rather than just killing the processes, the entire kernel went down. Stracing dd reveals that it first does an mmap2, which makes 1GB worth of zero page mappings. Then it performs a read on those pages from /dev/zero, and finally it performs a write. The machine died during the reads. Looking at the code, it was noticed that /dev/zero's read operation had been changed by 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") from giving zero page mappings to actually zeroing the page. The zeroing of the pages causes physical pages to be allocated to the process. But, when the process exhausts all the memory that it can, the kernel cannot kill it, as it is still in the kernel mode allocating more memory. Consequently, the kernel eventually crashes. To fix this, I propose that when a fatal signal is pending during /dev/zero read operation, we simply return and let the user process die. Signed-off-by: Salman Qazi Cc: Nick Piggin Signed-off-by: Andrew Morton [ Modified error return and comment trivially. - Linus] Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 8f05c38c2f0..65e12bca657 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -694,6 +694,9 @@ static ssize_t read_zero(struct file * file, char __user * buf, written += chunk - unwritten; if (unwritten) break; + /* Consider changing this to just 'signal_pending()' with lots of testing */ + if (fatal_signal_pending(current)) + return written ? written : -EINTR; buf += chunk; count -= chunk; cond_resched(); -- cgit v1.2.3-18-g5258 From e9e10124e269a39de089c5e0d9936fae2ff889b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Jun 2009 11:56:18 +0100 Subject: ivtv: Fix PCI DMA direction The ivtv stream buffers may be for receive or for send but the attached sg handle is always destined cpu->device. We flush it correctly but the allocation is wrongly done with the same type as the buffers. See bug: http://bugzilla.kernel.org/show_bug.cgi?id=13385 (Note this doesn't close the bug - it fixes the ivtv part and in turn the logging next shows up some rather alarming DMA sg list warnings in libata) Signed-off-by: Alan Cox Acked-by: Hans Verkuil Signed-off-by: Linus Torvalds --- drivers/media/video/ivtv/ivtv-queue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index ff7b7deded4..7fde36e6d22 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -230,7 +230,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s) return -ENOMEM; } if (ivtv_might_use_dma(s)) { - s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma); + s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); ivtv_stream_sync_for_cpu(s); } -- cgit v1.2.3-18-g5258 From 27704a16c9e0fb4c6b04344c7c4c40ac16148ec0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Jun 2009 10:21:52 -0700 Subject: Revert "drm: don't associate _DRM_DRIVER maps with a master" This reverts commit 6c51d1cfa0a370b48a157163340190cf5fd2346b, which apparently causes DRI initialization failures on Radeons. Reported-by: Markus Trippelsdorf Requested-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_bufs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 80a257554b3..0411d912d82 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -371,8 +371,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); - if (!(map->flags & _DRM_DRIVER)) - list->master = dev->primary->master; + list->master = dev->primary->master; *maplist = list; return 0; } -- cgit v1.2.3-18-g5258 From 45bc955bb1324a46c9539550cc615994e6d0a43d Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 5 Jun 2009 10:41:39 -0400 Subject: pata_legacy: wait for async probing The basic problem here that pata_legacy attaches the host, sees if it found any devices and detaches it if none were found. With async probing, it's not waiting until discovery is finished before deciding it has no devices and trying the detach leading to this warning: ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ------------[ cut here ]------------ WARNING: at drivers/ata/libata-core.c:6222 ata_host_detach+0x75/0x90() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.30-rc7 #1 Call Trace: [] ? ata_host_detach+0x75/0x90 [] ? ata_host_detach+0x75/0x90 [] ? warn_slowpath_common+0x45/0x80 [] ? warn_slowpath_null+0xa/0x10 [] ? ata_host_detach+0x75/0x90 [] ? legacy_init+0x44e/0x87f [] ? legacy_init+0x0/0x87f [] ? _stext+0x21/0x140 [] ? proc_register+0x2f/0x190 [] ? create_proc_entry+0x5c/0xc0 [] ? register_irq_proc+0x6e/0x90 [] ? kernel_init+0x6e/0xbf [] ? kernel_init+0x0/0xbf [] ? kernel_thread_helper+0x7/0x10 ---[ end trace ef1ee36e873ae3a0 ]--- Because it detaches before the probe is complete. One way to fix it would be to put an async_synchronize_full() before looking for devices, which this patch does. A better way might be to separate libata into its own domain and only wait for that. Reported-by: Mikael Pettersson Signed-off-by: James Bottomley Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index f72c6c5b820..6932e56d179 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -48,6 +48,7 @@ * */ +#include #include #include #include @@ -1028,6 +1029,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) &legacy_sht); if (ret) goto fail; + async_synchronize_full(); ld->platform_dev = pdev; /* Nothing found means we drop the port as its probably not there */ -- cgit v1.2.3-18-g5258 From 5f33b3bcd7aac66a51e6bfaf35e8cff4eabafb06 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 1 Jun 2009 22:42:10 +0300 Subject: pata_efar: fix PIO2 underclocking Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the PIIX/ICH drivers do. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 2085e0a3a05..2a6412f5d11 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -22,7 +22,7 @@ #include #define DRV_NAME "pata_efar" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /** * efar_pre_reset - Enable bits @@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ - control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ + control |= 2; /* IE */ + /* Intel specifies that the prefetch/posting is for disk only */ if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ + control |= 4; /* PPE */ pci_read_config_word(dev, idetm_port, &idetm_data); - /* Enable PPE, IE and TIME as appropriate */ - + /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { idetm_data &= 0xCCF0; idetm_data |= control; @@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + idetm_data |= 0x4000; /* Ensure SITRE is set */ pci_write_config_word(dev, idetm_port, idetm_data); } -- cgit v1.2.3-18-g5258 From 9b10ae86d1616f46dabb67c663fe6a9c3a502663 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 30 May 2009 20:50:12 +0900 Subject: ahci: add warning messages for hp laptops with broken suspend Harddisks on HP dv[4-6] and HDX18 fail to come online after resume on earlier BIOSen. Fortunately, HP recently released BIOS updates for all machines to fix the issue. Detect old BIOSen, warn the user to update BIOS on boot and suspend attempts and fail suspend. Kudos to all the bug reporters. Signed-off-by: Tejun Heo Cc: kernel.org@epperson.homelinux.net Cc: emisca@gmail.com Cc: Gadi Cohen Cc: Paul Swanson Cc: s@ourada.org Cc: Trevor Davenport Cc: corruptor1972 Cc: Victoria Wilson Cc: khiraly Cc: Sean Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 08186ecbaf8..6b91c26a463 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -220,6 +220,7 @@ enum { AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ /* ap->flags bits */ @@ -2316,9 +2317,17 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 ctl; + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_printk(KERN_ERR, &pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + if (mesg.event & PM_EVENT_SLEEP) { /* AHCI spec rev1.1 section 8.3.3: * Software must disable interrupts prior to requesting a @@ -2610,6 +2619,63 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) return false; } +static bool ahci_broken_suspend(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* + * On HP dv[4-6] and HDX18 with earlier BIOSen, link + * to the harddisk doesn't become online after + * resuming from STR. Warn and fail suspend. + */ + { + .ident = "dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv4 Notebook PC"), + }, + .driver_data = "F.30", /* cutoff BIOS version */ + }, + { + .ident = "dv5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv5 Notebook PC"), + }, + .driver_data = "F.16", /* cutoff BIOS version */ + }, + { + .ident = "dv6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv6 Notebook PC"), + }, + .driver_data = "F.21", /* cutoff BIOS version */ + }, + { + .ident = "HDX18", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP HDX18 Notebook PC"), + }, + .driver_data = "F.23", /* cutoff BIOS version */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + const char *ver; + + if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2)) + return false; + + ver = dmi_get_system_info(DMI_BIOS_VERSION); + + return !ver || strcmp(ver, dmi->driver_data) < 0; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2715,6 +2781,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "quirky BIOS, skipping spindown on poweroff\n"); } + if (ahci_broken_suspend(pdev)) { + hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; + dev_printk(KERN_WARNING, &pdev->dev, + "BIOS update required for suspend/resume\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at -- cgit v1.2.3-18-g5258 From 65e31643115349fd7a81acbe75ec4a54d5df8aad Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Tue, 19 May 2009 01:37:44 +0300 Subject: ata_piix: Add HP Compaq nc6000 to the broken poweroff list HP Compaq nc6000 suffers from the double disk spindown issue. Add it to the broken poweroff DMI list. Signed-off-by: Ville Syrjala Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d51a17c0f59..1aeb7082b0c 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1455,6 +1455,15 @@ static bool piix_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq nc6000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; -- cgit v1.2.3-18-g5258 From cd24f8c1e7e27a2c6051a9a338d4704a2431dbf0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 5 Jun 2009 18:48:08 +0100 Subject: mtd: davinci nand: update clock naming DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman Acked-by: David Brownell Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/nand/davinci_nand.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 0119220de7d..02700f769b8 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -407,16 +407,17 @@ static int __init nand_davinci_probe(struct platform_device *pdev) } info->chip.ecc.mode = ecc_mode; - info->clk = clk_get(&pdev->dev, "AEMIFCLK"); + info->clk = clk_get(&pdev->dev, "aemif"); if (IS_ERR(info->clk)) { ret = PTR_ERR(info->clk); - dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); goto err_clk; } ret = clk_enable(info->clk); if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", + ret); goto err_clk_enable; } -- cgit v1.2.3-18-g5258 From a3cb900cc408977a11519bc7c760f3e499079589 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 13 May 2009 15:02:27 +0100 Subject: [libata] pata_ali: Use IGN_SIMPLEX Some ALi devices report simplex if they have been disabled and re-enabled, and restoring the byte does not work. Ignore it - the needed supporting logic is already present for the SATA ULi ports. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 751b7ea4816..fc9c5d6d7d8 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -497,14 +497,16 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, @@ -512,7 +514,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -520,7 +523,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -528,7 +532,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -536,7 +541,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { - .flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, -- cgit v1.2.3-18-g5258 From 521a415c9f6d4e5463807ce6d36598acabcd204f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: pdc202xx_old: fix 'pdc20246_dma_ops' Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 248a54bd238..8df26302a0b 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -328,9 +328,8 @@ static const struct ide_dma_ops pdc20246_dma_ops = { .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_lost_irq = ide_dma_lost_irq, .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_clear = pdc202xx_reset, .dma_sff_read_status = ide_dma_sff_read_status, }; -- cgit v1.2.3-18-g5258 From 669165daad2ec839df85b8c5f7bc155e76a2f404 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: pdc202xx_old: fix resetproc() method pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 8df26302a0b..b3bc96f930a 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1998-2002 Andre Hedrick - * Copyright (C) 2006-2007 MontaVista Software, Inc. + * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * Portions Copyright (C) 1999 Promise Technology, Inc. @@ -227,28 +227,19 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static void pdc202xx_reset_host (ide_hwif_t *hwif) +static void pdc202xx_reset(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long high_16 = hwif->extra_base - 16; u8 udma_speed_flag = inb(high_16 | 0x001f); + printk(KERN_WARNING "PDC202xx: software reset...\n"); + outb(udma_speed_flag | 0x10, high_16 | 0x001f); mdelay(100); outb(udma_speed_flag & ~0x10, high_16 | 0x001f); mdelay(2000); /* 2 seconds ?! */ - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - hwif->channel ? "Secondary" : "Primary"); -} - -static void pdc202xx_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_hwif_t *mate = hwif->mate; - - pdc202xx_reset_host(hwif); - pdc202xx_reset_host(mate); - ide_set_max_pio(drive); } -- cgit v1.2.3-18-g5258 From e36b80b658d471be5a8a40f00e2c7614524b86a2 Mon Sep 17 00:00:00 2001 From: Matthieu Castet Date: Fri, 22 May 2009 22:25:04 +0200 Subject: SSB: BCM47xx: Export ssb_watchdog_timer_set this patch export ssb_watchdog_timer_set to allow to use it in a Linux watchdog driver. Signed-off-by: Matthieu CASTET Acked-by : Michael Buesch Signed-off-by: Ralf Baechle --- drivers/ssb/embedded.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c index 7dc3a6b4139..a0e0d246b59 100644 --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -29,6 +29,7 @@ int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks) } return -ENODEV; } +EXPORT_SYMBOL(ssb_watchdog_timer_set); u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask) { -- cgit v1.2.3-18-g5258 From 5284c6b99ea017f73c09b50f34a637ff9d5d26a0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Jun 2009 12:31:00 +0100 Subject: pata_netcell: Fix typo The previous patch submission had a I typo I didn't catch but Bartlomiej noted. Guess this proves the point about any patch being risky late in an rc Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/ata/pata_netcell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 9a698097134..f0d52f72f5b 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -26,7 +26,7 @@ static unsigned int netcell_read_id(struct ata_device *adev, unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); /* Firmware forgets to mark words 85-87 valid */ if (err_mask == 0) - id[ATA_ID_CSF_DEFAULT] |= 0x0400; + id[ATA_ID_CSF_DEFAULT] |= 0x4000; return err_mask; } -- cgit v1.2.3-18-g5258 From 40df6ae4277a67e97aa0a8bd8e293fdbb00e5623 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 15:59:38 -0500 Subject: cciss: Use schedule_timeout_uninterruptible in SCSI error handling code Use schedule_timeout_uninterruptible instead of schedule_timeout in the scsi error handling code when waiting between TUR polls since we are not interested in nor want to be interrupted by signals. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 2edfc9b644e..134fdf25d7f 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1608,7 +1608,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h, /* Wait for a bit. do this first, because if we send * the TUR right away, the reset will just abort it. */ - schedule_timeout_interruptible(waittime); + schedule_timeout_uninterruptible(waittime); count++; /* Increase wait time with each try, up to a point. */ -- cgit v1.2.3-18-g5258 From 5390cfc3fea49d015ae1eed8551c0bf00489b50e Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:01:11 -0500 Subject: cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code Factor the core of sendcmd_withirq out to provide a simpler interface which provides access to full error information. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 183 ++++++++++++++++++++++++++------------------------ 1 file changed, 96 insertions(+), 87 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e7d00952dd4..74fc85aded9 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2278,114 +2278,123 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ return status; } -static int sendcmd_withirq(__u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int use_unit_num, - unsigned int log_unit, __u8 page_code, int cmd_type) +static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c) { - ctlr_info_t *h = hba[ctlr]; - CommandList_struct *c; + DECLARE_COMPLETION_ONSTACK(wait); u64bit buff_dma_handle; unsigned long flags; - int return_status; - DECLARE_COMPLETION_ONSTACK(wait); + int return_status = IO_OK; - if ((c = cmd_alloc(h, 0)) == NULL) - return -ENOMEM; - return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, NULL, cmd_type); - if (return_status != IO_OK) { - cmd_free(h, c, 0); - return return_status; - } - resend_cmd2: +resend_cmd2: c->waiting = &wait; - /* Put the request on the tail of the queue and send it */ - spin_lock_irqsave(CCISS_LOCK(ctlr), flags); + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); addQ(&h->reqQ, c); h->Qdepth++; start_io(h); - spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); wait_for_completion(&wait); - if (c->err_info->CommandStatus != 0) { /* an error has occurred */ - switch (c->err_info->CommandStatus) { - case CMD_TARGET_STATUS: - printk(KERN_WARNING "cciss: cmd %p has " - " completed with errors\n", c); - if (c->err_info->ScsiStatus) { - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status = %x\n", - c, c->err_info->ScsiStatus); - } + if (c->err_info->CommandStatus == 0) + goto command_done; - break; - case CMD_DATA_UNDERRUN: - case CMD_DATA_OVERRUN: - /* expected for inquire and report lun commands */ - break; - case CMD_INVALID: - printk(KERN_WARNING "cciss: Cmd %p is " - "reported invalid\n", c); - return_status = IO_ERROR; - break; - case CMD_PROTOCOL_ERR: - printk(KERN_WARNING "cciss: cmd %p has " - "protocol error \n", c); - return_status = IO_ERROR; - break; - case CMD_HARDWARE_ERR: - printk(KERN_WARNING "cciss: cmd %p had " - " hardware error\n", c); - return_status = IO_ERROR; - break; - case CMD_CONNECTION_LOST: - printk(KERN_WARNING "cciss: cmd %p had " - "connection lost\n", c); - return_status = IO_ERROR; - break; - case CMD_ABORTED: - printk(KERN_WARNING "cciss: cmd %p was " - "aborted\n", c); - return_status = IO_ERROR; - break; - case CMD_ABORT_FAILED: - printk(KERN_WARNING "cciss: cmd %p reports " - "abort failed\n", c); - return_status = IO_ERROR; - break; - case CMD_UNSOLICITED_ABORT: + switch (c->err_info->CommandStatus) { + case CMD_TARGET_STATUS: + printk(KERN_WARNING "cciss: cmd 0x%02x " + "has completed with errors\n", c->Request.CDB[0]); + if (c->err_info->ScsiStatus) { + printk(KERN_WARNING "cciss: cmd 0x%02x " + "has SCSI Status = %x\n", + c->Request.CDB[0], c->err_info->ScsiStatus); + } + break; + case CMD_DATA_UNDERRUN: + case CMD_DATA_OVERRUN: + /* expected for inquiry and report lun commands */ + break; + case CMD_INVALID: + printk(KERN_WARNING "cciss: Cmd 0x%02x is " + "reported invalid\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_PROTOCOL_ERR: + printk(KERN_WARNING "cciss: cmd 0x%02x has " + "protocol error \n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_HARDWARE_ERR: + printk(KERN_WARNING "cciss: cmd 0x%02x had " + " hardware error\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_CONNECTION_LOST: + printk(KERN_WARNING "cciss: cmd 0x%02x had " + "connection lost\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_ABORTED: + printk(KERN_WARNING "cciss: cmd 0x%02x was " + "aborted\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_ABORT_FAILED: + printk(KERN_WARNING "cciss: cmd 0x%02x reports " + "abort failed\n", c->Request.CDB[0]); + return_status = IO_ERROR; + break; + case CMD_UNSOLICITED_ABORT: + printk(KERN_WARNING + "cciss%d: unsolicited abort 0x%02x\n", h->ctlr, + c->Request.CDB[0]); + if (c->retry_count < MAX_CMD_RETRIES) { printk(KERN_WARNING - "cciss%d: unsolicited abort %p\n", ctlr, c); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying %p\n", ctlr, c); - c->retry_count++; - /* erase the old error information */ - memset(c->err_info, 0, - sizeof(ErrorInfo_struct)); - return_status = IO_OK; - INIT_COMPLETION(wait); - goto resend_cmd2; - } - return_status = IO_ERROR; - break; - default: - printk(KERN_WARNING "cciss: cmd %p returned " - "unknown status %x\n", c, - c->err_info->CommandStatus); - return_status = IO_ERROR; + "cciss%d: retrying 0x%02x\n", h->ctlr, + c->Request.CDB[0]); + c->retry_count++; + /* erase the old error information */ + memset(c->err_info, 0, + sizeof(ErrorInfo_struct)); + return_status = IO_OK; + INIT_COMPLETION(wait); + goto resend_cmd2; } + return_status = IO_ERROR; + break; + default: + printk(KERN_WARNING "cciss: cmd 0x%02x returned " + "unknown status %x\n", c->Request.CDB[0], + c->err_info->CommandStatus); + return_status = IO_ERROR; } + +command_done: /* unlock the buffers from DMA */ buff_dma_handle.val32.lower = c->SG[0].Addr.lower; buff_dma_handle.val32.upper = c->SG[0].Addr.upper; pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); + return return_status; +} + +static int sendcmd_withirq(__u8 cmd, + int ctlr, + void *buff, + size_t size, + unsigned int use_unit_num, + unsigned int log_unit, __u8 page_code, int cmd_type) +{ + ctlr_info_t *h = hba[ctlr]; + CommandList_struct *c; + int return_status; + + c = cmd_alloc(h, 0); + if (!c) + return -ENOMEM; + return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, + log_unit, page_code, NULL, cmd_type); + if (return_status == IO_OK) + return_status = sendcmd_withirq_core(h, c); cmd_free(h, c, 0); return return_status; } -- cgit v1.2.3-18-g5258 From b57695fe131b13d3f2460cfeb9175cff673ed337 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:02:17 -0500 Subject: cciss: simplify interface of sendcmd() and sendcmd_withirq() Simplify interfaces of sendcmd() and sendcmd_withirq() so that they provide only one way to address commands instead of three ways. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 115 +++++++++++++++++++++------------------------ drivers/block/cciss_cmd.h | 2 + drivers/block/cciss_scsi.c | 26 ++-------- 3 files changed, 59 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 74fc85aded9..885ea1e38e4 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -180,11 +180,10 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, __u32); static void start_io(ctlr_info_t *h); static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num, unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, int cmd_type); static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num, unsigned int log_unit, - __u8 page_code, int cmd_type); + __u8 page_code, unsigned char scsi3addr[], + int cmd_type); static void fail_all_cmds(unsigned long ctlr); static int scan_thread(void *data); @@ -1520,6 +1519,15 @@ static void cciss_softirq_done(struct request *rq) spin_unlock_irqrestore(&h->lock, flags); } +static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[], + uint32_t log_unit) +{ + log_unit = h->drv[log_unit].LunID & 0x03fff; + memset(&scsi3addr[4], 0, 4); + memcpy(&scsi3addr[0], &log_unit, 4); + scsi3addr[3] |= 0x40; +} + /* This function gets the SCSI vendor, model, and revision of a logical drive * via the inquiry page 0. Model, vendor, and rev are set to empty strings if * they cannot be read. @@ -1529,6 +1537,7 @@ static void cciss_get_device_descr(int ctlr, int logvol, int withirq, { int rc; InquiryData_struct *inq_buf; + unsigned char scsi3addr[8]; *vendor = '\0'; *model = '\0'; @@ -1538,14 +1547,15 @@ static void cciss_get_device_descr(int ctlr, int logvol, int withirq, if (!inq_buf) return; + log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); if (withirq) rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, - sizeof(InquiryData_struct), 1, logvol, - 0, TYPE_CMD); + sizeof(InquiryData_struct), 0, + scsi3addr, TYPE_CMD); else rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf, - sizeof(InquiryData_struct), 1, logvol, 0, NULL, - TYPE_CMD); + sizeof(InquiryData_struct), 0, + scsi3addr, TYPE_CMD); if (rc == IO_OK) { memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN); vendor[VENDOR_LEN] = '\0'; @@ -1570,6 +1580,7 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, #define PAGE_83_INQ_BYTES 64 int rc; unsigned char *buf; + unsigned char scsi3addr[8]; if (buflen > 16) buflen = 16; @@ -1578,12 +1589,13 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, if (!buf) return; memset(serial_no, 0, buflen); + log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); if (withirq) rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf, - PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD); + PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); else rc = sendcmd(CISS_INQUIRY, ctlr, buf, - PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD); + PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD); if (rc == IO_OK) memcpy(serial_no, &buf[8], buflen); kfree(buf); @@ -1902,8 +1914,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) goto mem_msg; return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, - sizeof(ReportLunData_struct), 0, - 0, 0, TYPE_CMD); + sizeof(ReportLunData_struct), + 0, CTLR_LUNID, TYPE_CMD); if (return_code == IO_OK) listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); @@ -2112,11 +2124,9 @@ static int deregister_disk(ctlr_info_t *h, int drv_index, return 0; } -static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, __u8 page_code, - unsigned char *scsi3addr, int cmd_type) +static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, + size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) { ctlr_info_t *h = hba[ctlr]; u64bit buff_dma_handle; @@ -2132,27 +2142,12 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Header.SGTotal = 0; } c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); c->Request.Type.Type = cmd_type; if (cmd_type == TYPE_CMD) { switch (cmd) { case CISS_INQUIRY: - /* If the logical unit number is 0 then, this is going - to controller so It's a physical command - mode = 0 target = 0. So we have nothing to write. - otherwise, if use_unit_num == 1, - mode = 1(volume set addressing) target = LUNID - otherwise, if use_unit_num == 2, - mode = 0(periph dev addr) target = scsi3addr */ - if (use_unit_num == 1) { - c->Header.LUN.LogDev.VolId = - h->drv[log_unit].LunID; - c->Header.LUN.LogDev.Mode = 1; - } else if (use_unit_num == 2) { - memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, - 8); - c->Header.LUN.LogDev.Mode = 0; - } /* are we trying to read a vital product page */ if (page_code != 0) { c->Request.CDB[1] = 0x01; @@ -2182,8 +2177,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ break; case CCISS_READ_CAPACITY: - c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID; - c->Header.LUN.LogDev.Mode = 1; c->Request.CDBLen = 10; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_READ; @@ -2191,8 +2184,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.CDB[0] = cmd; break; case CCISS_READ_CAPACITY_16: - c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID; - c->Header.LUN.LogDev.Mode = 1; c->Request.CDBLen = 16; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_READ; @@ -2215,7 +2206,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ c->Request.CDB[6] = BMIC_CACHE_FLUSH; break; case TEST_UNIT_READY: - memcpy(c->Header. LUN.LunAddrBytes, scsi3addr, 8); c->Request.CDBLen = 6; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_NONE; @@ -2239,7 +2229,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_ memcpy(&c->Request.CDB[4], buff, 8); break; case 1: /* RESET message */ - memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); c->Request.CDBLen = 16; c->Request.Type.Attribute = ATTR_SIMPLE; c->Request.Type.Direction = XFER_NONE; @@ -2307,6 +2296,9 @@ resend_cmd2: printk(KERN_WARNING "cciss: cmd 0x%02x " "has SCSI Status = %x\n", c->Request.CDB[0], c->err_info->ScsiStatus); + if (c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) + printk(KERN_WARNING "sense key = 0x%02x\n", + 0xf & c->err_info->SenseInfo[2]); } break; case CMD_DATA_UNDERRUN: @@ -2377,12 +2369,9 @@ command_done: return return_status; } -static int sendcmd_withirq(__u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int use_unit_num, - unsigned int log_unit, __u8 page_code, int cmd_type) +static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, + __u8 page_code, unsigned char scsi3addr[], + int cmd_type) { ctlr_info_t *h = hba[ctlr]; CommandList_struct *c; @@ -2391,8 +2380,8 @@ static int sendcmd_withirq(__u8 cmd, c = cmd_alloc(h, 0); if (!c) return -ENOMEM; - return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, NULL, cmd_type); + return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code, + scsi3addr, cmd_type); if (return_status == IO_OK) return_status = sendcmd_withirq_core(h, c); cmd_free(h, c, 0); @@ -2407,15 +2396,17 @@ static void cciss_geometry_inquiry(int ctlr, int logvol, { int return_code; unsigned long t; + unsigned char scsi3addr[8]; memset(inq_buff, 0, sizeof(InquiryData_struct)); + log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); if (withirq) return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, - inq_buff, sizeof(*inq_buff), 1, - logvol, 0xC1, TYPE_CMD); + inq_buff, sizeof(*inq_buff), + 0xC1, scsi3addr, TYPE_CMD); else return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff, - sizeof(*inq_buff), 1, logvol, 0xC1, NULL, + sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD); if (return_code == IO_OK) { if (inq_buff->data_byte[8] == 0xFF) { @@ -2456,6 +2447,7 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size, { ReadCapdata_struct *buf; int return_code; + unsigned char scsi3addr[8]; buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL); if (!buf) { @@ -2463,14 +2455,15 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size, return; } + log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); if (withirq) return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, buf, sizeof(ReadCapdata_struct), - 1, logvol, 0, TYPE_CMD); + 0, scsi3addr, TYPE_CMD); else return_code = sendcmd(CCISS_READ_CAPACITY, ctlr, buf, sizeof(ReadCapdata_struct), - 1, logvol, 0, NULL, TYPE_CMD); + 0, scsi3addr, TYPE_CMD); if (return_code == IO_OK) { *total_size = be32_to_cpu(*(__be32 *) buf->total_size); *block_size = be32_to_cpu(*(__be32 *) buf->block_size); @@ -2490,6 +2483,7 @@ cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size, { ReadCapdata_struct_16 *buf; int return_code; + unsigned char scsi3addr[8]; buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL); if (!buf) { @@ -2497,15 +2491,16 @@ cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size, return; } + log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol); if (withirq) { return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16, ctlr, buf, sizeof(ReadCapdata_struct_16), - 1, logvol, 0, TYPE_CMD); + 0, scsi3addr, TYPE_CMD); } else { return_code = sendcmd(CCISS_READ_CAPACITY_16, ctlr, buf, sizeof(ReadCapdata_struct_16), - 1, logvol, 0, NULL, TYPE_CMD); + 0, scsi3addr, TYPE_CMD); } if (return_code == IO_OK) { *total_size = be64_to_cpu(*(__be64 *) buf->total_size); @@ -2760,10 +2755,6 @@ cleanup1: * Used at init time, and during SCSI error recovery. */ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num,/* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, int cmd_type) { CommandList_struct *c; @@ -2774,8 +2765,8 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, printk(KERN_WARNING "cciss: unable to get memory"); return IO_ERROR; } - status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, - log_unit, page_code, scsi3addr, cmd_type); + status = fill_cmd(c, cmd, ctlr, buff, size, page_code, + scsi3addr, cmd_type); if (status == IO_OK) status = sendcmd_core(hba[ctlr], c); cmd_free(hba[ctlr], c, 1); @@ -4076,7 +4067,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, } return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff, - sizeof(InquiryData_struct), 0, 0 , 0, TYPE_CMD); + sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD); if (return_code == IO_OK) { hba[i]->firm_ver[0] = inq_buff->data_byte[32]; hba[i]->firm_ver[1] = inq_buff->data_byte[33]; @@ -4157,8 +4148,8 @@ static void cciss_shutdown(struct pci_dev *pdev) /* sendcmd will turn off interrupt, and send the flush... * To write all data in the battery backed cache to disks */ memset(flush_buf, 0, 4); - return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL, - TYPE_CMD); + return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, + CTLR_LUNID, TYPE_CMD); if (return_code == IO_OK) { printk(KERN_INFO "Completed flushing cache on controller %d\n", i); } else { diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h index 40b1b92dae7..cd665b00c7c 100644 --- a/drivers/block/cciss_cmd.h +++ b/drivers/block/cciss_cmd.h @@ -217,6 +217,8 @@ typedef union _LUNAddr_struct { LogDevAddr_struct LogDev; } LUNAddr_struct; +#define CTLR_LUNID "\0\0\0\0\0\0\0\0" + typedef struct _CommandListHeader_struct { BYTE ReplyQueue; BYTE SGList; diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 134fdf25d7f..007ab8aea85 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -44,26 +44,9 @@ #define CCISS_ABORT_MSG 0x00 #define CCISS_RESET_MSG 0x01 -/* some prototypes... */ -static int sendcmd( - __u8 cmd, - int ctlr, - void *buff, - size_t size, - unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: address is in scsi3addr */ - unsigned int log_unit, - __u8 page_code, - unsigned char *scsi3addr, - int cmd_type); - static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, - unsigned int use_unit_num, /* 0: address the controller, - 1: address logical volume log_unit, - 2: periph device address is scsi3addr */ - unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, + __u8 page_code, unsigned char *scsi3addr, int cmd_type); static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c); @@ -1616,7 +1599,7 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h, waittime = waittime * 2; /* Send the Test Unit Ready */ - rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, 0, 0, + rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, lunaddr, TYPE_CMD); if (rc == 0) { rc = sendcmd_core(h, c); @@ -1680,7 +1663,7 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return FAILED; memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8); /* send a reset to the SCSI LUN which the command was sent to */ - rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 2, 0, 0, lunaddr, + rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr, TYPE_MSG); /* sendcmd turned off interrupts on the board, turn 'em back on. */ (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); @@ -1708,8 +1691,7 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble; if (cmd_to_abort == NULL) /* paranoia */ return FAILED; - rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, - 0, 2, 0, 0, + rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, 0, 0, (unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], TYPE_MSG); /* sendcmd turned off interrupts on the board, turn 'em back on. */ -- cgit v1.2.3-18-g5258 From 3c2ab40296894d1f7ad9714550fdf9b96d4e9ee6 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:04:35 -0500 Subject: cciss: factor out fix target status processing code from sendcmd functions Factor out code to process target status of completed commands in sendcmd() and sendcmd_withirq_core(), and fix problem that bad target status was ignored in sendcmd_withirq_core. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 56 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 34 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 885ea1e38e4..2d128831d3c 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2267,6 +2267,31 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, return status; } +static int check_target_status(ctlr_info_t *h, CommandList_struct *c) +{ + switch (c->err_info->ScsiStatus) { + case SAM_STAT_GOOD: + return IO_OK; + case SAM_STAT_CHECK_CONDITION: + switch (0xf & c->err_info->SenseInfo[2]) { + case 0: return IO_OK; /* no sense */ + case 1: return IO_OK; /* recovered error */ + default: + printk(KERN_WARNING "cciss%d: cmd 0x%02x " + "check condition, sense key = 0x%02x\n", + h->ctlr, c->Request.CDB[0], + c->err_info->SenseInfo[2]); + } + break; + default: + printk(KERN_WARNING "cciss%d: cmd 0x%02x" + "scsi status = 0x%02x\n", h->ctlr, + c->Request.CDB[0], c->err_info->ScsiStatus); + break; + } + return IO_ERROR; +} + static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c) { DECLARE_COMPLETION_ONSTACK(wait); @@ -2290,16 +2315,7 @@ resend_cmd2: switch (c->err_info->CommandStatus) { case CMD_TARGET_STATUS: - printk(KERN_WARNING "cciss: cmd 0x%02x " - "has completed with errors\n", c->Request.CDB[0]); - if (c->err_info->ScsiStatus) { - printk(KERN_WARNING "cciss: cmd 0x%02x " - "has SCSI Status = %x\n", - c->Request.CDB[0], c->err_info->ScsiStatus); - if (c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) - printk(KERN_WARNING "sense key = 0x%02x\n", - 0xf & c->err_info->SenseInfo[2]); - } + return_status = check_target_status(h, c); break; case CMD_DATA_UNDERRUN: case CMD_DATA_OVERRUN: @@ -2710,33 +2726,29 @@ resend_cmd1: printk(KERN_WARNING "cciss%d: retried %p too many " "times\n", h->ctlr, c); status = IO_ERROR; - goto cleanup1; + break; } if (c->err_info->CommandStatus == CMD_UNABORTABLE) { printk(KERN_WARNING "cciss%d: command could not be " "aborted.\n", h->ctlr); status = IO_ERROR; - goto cleanup1; + break; } - printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr); - printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n", - c->Request.CDB[0], c->err_info->CommandStatus); if (c->err_info->CommandStatus == CMD_TARGET_STATUS) { - printk(KERN_WARNING "Target status = 0x%02x\n", - c->err_info->ScsiStatus); - if (c->err_info->ScsiStatus == 2) /* chk cond */ - printk(KERN_WARNING "Sense key = 0x%02x\n", - 0xf & c->err_info->SenseInfo[2]); + status = check_target_status(h, c); + break; } + printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr); + printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n", + c->Request.CDB[0], c->err_info->CommandStatus); status = IO_ERROR; - goto cleanup1; + break; } while (1); -cleanup1: /* unlock the data buffer from DMA */ buff_dma_handle.val32.lower = c->SG[0].Addr.lower; buff_dma_handle.val32.upper = c->SG[0].Addr.upper; -- cgit v1.2.3-18-g5258 From 789a424ad1352b335960e7c56494d0410577fa61 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:05:56 -0500 Subject: cciss: separate error processing and command retrying code in sendcmd_withirq_core() Separate the error processing from sendcmd_withirq_core from the code which retries commands. The rationale for this is that the SCSI error handling code can then be made to use sendcmd_withirq_core, but avoid retrying commands. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 77 ++++++++++++++++++++++++++++++--------------------- drivers/block/cciss.h | 1 + 2 files changed, 46 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 2d128831d3c..70017071106 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2292,26 +2292,12 @@ static int check_target_status(ctlr_info_t *h, CommandList_struct *c) return IO_ERROR; } -static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c) +static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c) { - DECLARE_COMPLETION_ONSTACK(wait); - u64bit buff_dma_handle; - unsigned long flags; int return_status = IO_OK; -resend_cmd2: - c->waiting = &wait; - /* Put the request on the tail of the queue and send it */ - spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); - addQ(&h->reqQ, c); - h->Qdepth++; - start_io(h); - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - - wait_for_completion(&wait); - - if (c->err_info->CommandStatus == 0) - goto command_done; + if (c->err_info->CommandStatus == CMD_SUCCESS) + return IO_OK; switch (c->err_info->CommandStatus) { case CMD_TARGET_STATUS: @@ -2322,7 +2308,7 @@ resend_cmd2: /* expected for inquiry and report lun commands */ break; case CMD_INVALID: - printk(KERN_WARNING "cciss: Cmd 0x%02x is " + printk(KERN_WARNING "cciss: cmd 0x%02x is " "reported invalid\n", c->Request.CDB[0]); return_status = IO_ERROR; break; @@ -2355,19 +2341,7 @@ resend_cmd2: printk(KERN_WARNING "cciss%d: unsolicited abort 0x%02x\n", h->ctlr, c->Request.CDB[0]); - if (c->retry_count < MAX_CMD_RETRIES) { - printk(KERN_WARNING - "cciss%d: retrying 0x%02x\n", h->ctlr, - c->Request.CDB[0]); - c->retry_count++; - /* erase the old error information */ - memset(c->err_info, 0, - sizeof(ErrorInfo_struct)); - return_status = IO_OK; - INIT_COMPLETION(wait); - goto resend_cmd2; - } - return_status = IO_ERROR; + return_status = IO_NEEDS_RETRY; break; default: printk(KERN_WARNING "cciss: cmd 0x%02x returned " @@ -2375,6 +2349,44 @@ resend_cmd2: c->err_info->CommandStatus); return_status = IO_ERROR; } + return return_status; +} + +static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, + int attempt_retry) +{ + DECLARE_COMPLETION_ONSTACK(wait); + u64bit buff_dma_handle; + unsigned long flags; + int return_status = IO_OK; + +resend_cmd2: + c->waiting = &wait; + /* Put the request on the tail of the queue and send it */ + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + addQ(&h->reqQ, c); + h->Qdepth++; + start_io(h); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + + wait_for_completion(&wait); + + if (c->err_info->CommandStatus == 0 || !attempt_retry) + goto command_done; + + return_status = process_sendcmd_error(h, c); + + if (return_status == IO_NEEDS_RETRY && + c->retry_count < MAX_CMD_RETRIES) { + printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr, + c->Request.CDB[0]); + c->retry_count++; + /* erase the old error information */ + memset(c->err_info, 0, sizeof(ErrorInfo_struct)); + return_status = IO_OK; + INIT_COMPLETION(wait); + goto resend_cmd2; + } command_done: /* unlock the buffers from DMA */ @@ -2399,7 +2411,8 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code, scsi3addr, cmd_type); if (return_status == IO_OK) - return_status = sendcmd_withirq_core(h, c); + return_status = sendcmd_withirq_core(h, c, 1); + cmd_free(h, c, 0); return return_status; } diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index dd1926d8cd9..25cd58e2502 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -11,6 +11,7 @@ #define IO_OK 0 #define IO_ERROR 1 +#define IO_NEEDS_RETRY 3 #define VENDOR_LEN 8 #define MODEL_LEN 16 -- cgit v1.2.3-18-g5258 From 85cc61ae41084cb6d8ecc6c9e01ac4563005c8ac Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:07:45 -0500 Subject: cciss: change SCSI error handling routines to work with interrupts enabled. Change cciss scsi error handling routines to work with interrupts enabled. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 3 +++ drivers/block/cciss_scsi.c | 24 +++++++++--------------- 2 files changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 70017071106..9a9db6deefc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -184,6 +184,9 @@ static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, __u8 page_code, unsigned char scsi3addr[], int cmd_type); +static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, + int attempt_retry); +static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c); static void fail_all_cmds(unsigned long ctlr); static int scan_thread(void *data); diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 007ab8aea85..d2eb4897741 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -49,8 +49,6 @@ static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, __u8 page_code, unsigned char *scsi3addr, int cmd_type); -static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c); - static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool); static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool); @@ -1601,11 +1599,10 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h, /* Send the Test Unit Ready */ rc = fill_cmd(c, TEST_UNIT_READY, h->ctlr, NULL, 0, 0, lunaddr, TYPE_CMD); - if (rc == 0) { - rc = sendcmd_core(h, c); - /* sendcmd turned off interrupts, turn 'em back on. */ - h->access.set_intr_mask(h, CCISS_INTR_ON); - } + if (rc == 0) + rc = sendcmd_withirq_core(h, c, 0); + + (void) process_sendcmd_error(h, c); if (rc == 0 && c->err_info->CommandStatus == CMD_SUCCESS) break; @@ -1663,10 +1660,8 @@ static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd) return FAILED; memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8); /* send a reset to the SCSI LUN which the command was sent to */ - rc = sendcmd(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr, + rc = sendcmd_withirq(CCISS_RESET_MSG, ctlr, NULL, 0, 0, lunaddr, TYPE_MSG); - /* sendcmd turned off interrupts on the board, turn 'em back on. */ - (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); if (rc == 0 && wait_for_device_to_become_ready(*c, lunaddr) == 0) return SUCCESS; printk(KERN_WARNING "cciss%d: resetting device failed.\n", ctlr); @@ -1677,6 +1672,7 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) { int rc; CommandList_struct *cmd_to_abort; + unsigned char lunaddr[8]; ctlr_info_t **c; int ctlr; @@ -1691,11 +1687,9 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble; if (cmd_to_abort == NULL) /* paranoia */ return FAILED; - rc = sendcmd(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, 0, 0, - (unsigned char *) &cmd_to_abort->Header.LUN.LunAddrBytes[0], - TYPE_MSG); - /* sendcmd turned off interrupts on the board, turn 'em back on. */ - (*c)->access.set_intr_mask(*c, CCISS_INTR_ON); + memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8); + rc = sendcmd_withirq(CCISS_ABORT_MSG, ctlr, &cmd_to_abort->Header.Tag, + 0, 0, lunaddr, TYPE_MSG); if (rc == 0) return SUCCESS; return FAILED; -- cgit v1.2.3-18-g5258 From 72f9f1324fc4cd450c92e4600a710231b0445c75 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:09:32 -0500 Subject: cciss: Remove no longer needed sendcmd reject processing code Now that the cciss SCSI error handling routines operate with interrupts enabled, we no longer need to maintain the list of command completions that sendcmd() might inadvertantly scoop up, since now it only runs at driver init time, and there won't be any other commands for it to scoop up. So we can remove that list and the code that adds to it and processes it. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 98 ++------------------------------------------------- drivers/block/cciss.h | 9 ----- 2 files changed, 3 insertions(+), 104 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9a9db6deefc..b22cec97ea1 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2612,51 +2612,6 @@ static unsigned long pollcomplete(int ctlr) return 1; } -static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) -{ - /* We get in here if sendcmd() is polling for completions - and gets some command back that it wasn't expecting -- - something other than that which it just sent down. - Ordinarily, that shouldn't happen, but it can happen when - the scsi tape stuff gets into error handling mode, and - starts using sendcmd() to try to abort commands and - reset tape drives. In that case, sendcmd may pick up - completions of commands that were sent to logical drives - through the block i/o system, or cciss ioctls completing, etc. - In that case, we need to save those completions for later - processing by the interrupt handler. - */ - -#ifdef CONFIG_CISS_SCSI_TAPE - struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects; - - /* If it's not the scsi tape stuff doing error handling, (abort */ - /* or reset) then we don't expect anything weird. */ - if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) { -#endif - printk(KERN_WARNING "cciss cciss%d: SendCmd " - "Invalid command list address returned! (%lx)\n", - ctlr, complete); - /* not much we can do. */ -#ifdef CONFIG_CISS_SCSI_TAPE - return 1; - } - - /* We've sent down an abort or reset, but something else - has completed */ - if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) { - /* Uh oh. No room to save it for later... */ - printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, " - "reject list overflow, command lost!\n", ctlr); - return 1; - } - /* Save it for later */ - srl->complete[srl->ncompletions] = complete; - srl->ncompletions++; -#endif - return 0; -} - /* Send command c to controller h and poll for it to complete. * Turns interrupts off on the board. Used at driver init time * and during SCSI error recovery. @@ -2701,11 +2656,10 @@ resend_cmd1: break; } - /* If it's not the cmd we're looking for, save it for later */ + /* Make sure it's the command we're expecting. */ if ((complete & ~CISS_ERROR_BIT) != c->busaddr) { - if (add_sendcmd_reject(c->Request.CDB[0], - h->ctlr, complete) != 0) - BUG(); /* we are hosed if we get here. */ + printk(KERN_WARNING "cciss%d: Unexpected command " + "completion.\n", h->ctlr); continue; } @@ -2770,11 +2724,6 @@ resend_cmd1: buff_dma_handle.val32.upper = c->SG[0].Addr.upper; pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val, c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); -#ifdef CONFIG_CISS_SCSI_TAPE - /* if we saved some commands for later, process them now. */ - if (h->scsi_rejects.ncompletions > 0) - do_cciss_intr(0, h); -#endif return status; } @@ -3195,44 +3144,18 @@ startio: static inline unsigned long get_next_completion(ctlr_info_t *h) { -#ifdef CONFIG_CISS_SCSI_TAPE - /* Any rejects from sendcmd() lying around? Process them first */ - if (h->scsi_rejects.ncompletions == 0) - return h->access.command_completed(h); - else { - struct sendcmd_reject_list *srl; - int n; - srl = &h->scsi_rejects; - n = --srl->ncompletions; - /* printk("cciss%d: processing saved reject\n", h->ctlr); */ - printk("p"); - return srl->complete[n]; - } -#else return h->access.command_completed(h); -#endif } static inline int interrupt_pending(ctlr_info_t *h) { -#ifdef CONFIG_CISS_SCSI_TAPE - return (h->access.intr_pending(h) - || (h->scsi_rejects.ncompletions > 0)); -#else return h->access.intr_pending(h); -#endif } static inline long interrupt_not_for_us(ctlr_info_t *h) { -#ifdef CONFIG_CISS_SCSI_TAPE - return (((h->access.intr_pending(h) == 0) || - (h->interrupts_enabled == 0)) - && (h->scsi_rejects.ncompletions == 0)); -#else return (((h->access.intr_pending(h) == 0) || (h->interrupts_enabled == 0))); -#endif } static irqreturn_t do_cciss_intr(int irq, void *dev_id) @@ -4054,15 +3977,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, printk(KERN_ERR "cciss: out of memory"); goto clean4; } -#ifdef CONFIG_CISS_SCSI_TAPE - hba[i]->scsi_rejects.complete = - kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) * - (hba[i]->nr_cmds + 5), GFP_KERNEL); - if (hba[i]->scsi_rejects.complete == NULL) { - printk(KERN_ERR "cciss: out of memory"); - goto clean4; - } -#endif spin_lock_init(&hba[i]->lock); /* Initialize the pdev driver private data. @@ -4122,9 +4036,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, clean4: kfree(inq_buff); -#ifdef CONFIG_CISS_SCSI_TAPE - kfree(hba[i]->scsi_rejects.complete); -#endif kfree(hba[i]->cmd_pool_bits); if (hba[i]->cmd_pool) pci_free_consistent(hba[i]->pdev, @@ -4242,9 +4153,6 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct), hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); kfree(hba[i]->cmd_pool_bits); -#ifdef CONFIG_CISS_SCSI_TAPE - kfree(hba[i]->scsi_rejects.complete); -#endif /* * Deliberately omit pci_disable_device(): it does something nasty to * Smart Array controllers that pci_enable_device does not undo diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index 25cd58e2502..06a5db25b29 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -53,14 +53,6 @@ typedef struct _drive_info_struct char rev[REV_LEN + 1]; /* SCSI revision string */ } drive_info_struct; -#ifdef CONFIG_CISS_SCSI_TAPE - -struct sendcmd_reject_list { - int ncompletions; - unsigned long *complete; /* array of NR_CMDS tags */ -}; - -#endif struct ctlr_info { int ctlr; @@ -128,7 +120,6 @@ struct ctlr_info void *scsi_ctlr; /* ptr to structure containing scsi related stuff */ /* list of block side commands the scsi error handling sucked up */ /* and saved for later processing */ - struct sendcmd_reject_list scsi_rejects; #endif unsigned char alive; struct completion *rescan_wait; -- cgit v1.2.3-18-g5258 From 3969251b80a7b143d01576780073fe0cc9ef6253 Mon Sep 17 00:00:00 2001 From: "scameron@beardog.cca.cpqcorp.net" Date: Mon, 8 Jun 2009 16:10:57 -0500 Subject: cciss: decode unit attention in SCSI error handling code Make SCSI reset error handler decode unit attention ASC and after a target reset wait for a unit attention that indicates a reset occurred rather than just for any old unit attention. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index d2eb4897741..3315268b4ec 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1604,16 +1604,25 @@ static int wait_for_device_to_become_ready(ctlr_info_t *h, (void) process_sendcmd_error(h, c); - if (rc == 0 && c->err_info->CommandStatus == CMD_SUCCESS) - break; + if (rc != 0) + goto retry_tur; - if (rc == 0 && - c->err_info->CommandStatus == CMD_TARGET_STATUS && - c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && - (c->err_info->SenseInfo[2] == NO_SENSE || - c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + if (c->err_info->CommandStatus == CMD_SUCCESS) break; + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) { + if (c->err_info->SenseInfo[2] == NO_SENSE) + break; + if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) { + unsigned char asc; + asc = c->err_info->SenseInfo[12]; + check_for_unit_attention(h, c); + if (asc == POWER_OR_RESET) + break; + } + } +retry_tur: printk(KERN_WARNING "cciss%d: Waiting %d secs " "for device to become ready.\n", h->ctlr, waittime / HZ); -- cgit v1.2.3-18-g5258 From 9df1bb9b516daeece159ab7fb262d01a0359247c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 9 Jun 2009 06:22:57 +0200 Subject: Revert "block: Fix bounce limit setting in DM" This reverts commit a05c0205ba031c01bba33a21bf0a35920eb64833. DM doesn't need to access the bounce_pfn directly. Signed-off-by: Jens Axboe --- drivers/md/dm-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 3ca1604ddd5..e9a73bb242b 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -920,7 +920,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) blk_queue_max_segment_size(q, t->limits.max_segment_size); blk_queue_max_hw_sectors(q, t->limits.max_hw_sectors); blk_queue_segment_boundary(q, t->limits.seg_boundary_mask); - blk_queue_bounce_pfn(q, t->limits.bounce_pfn); + blk_queue_bounce_limit(q, t->limits.bounce_pfn); if (t->limits.no_cluster) queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q); -- cgit v1.2.3-18-g5258 From f001a70cdc61c01452d42e8b32fd7c7842ef62d5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 14:30:31 +1000 Subject: md/raid5: use conf->raid_disks in preference to mddev->raid_disk mddev->raid_disks can be changed and any time by a request from user-space. It is a suggestion as to what number of raid_disks is desired. conf->raid_disks can only be changed by the raid5 module with suitable locks in place. It is a statement as to the current number of raid_disks. There are two places where the latter should be used, but the former is used. This can lead to a crash when reshaping an array. This patch changes to mddev-> to conf-> Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 5d400aef8d9..75469e63ff1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3288,7 +3288,7 @@ static void unplug_slaves(mddev_t *mddev) int i; rcu_read_lock(); - for (i=0; iraid_disks; i++) { + for (i = 0; i < conf->raid_disks; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) { struct request_queue *r_queue = bdev_get_queue(rdev->bdev); @@ -4034,7 +4034,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski * We don't need to check the 'failed' flag as when that gets set, * recovery aborts. */ - for (i=0; iraid_disks; i++) + for (i = 0; i < conf->raid_disks; i++) if (conf->disks[i].rdev == NULL) still_degraded = 1; -- cgit v1.2.3-18-g5258 From a8c906ca3f63d05f0d25490cf82276f73c6fe095 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 14:39:59 +1000 Subject: md/raid5 - avoid deadlocks in get_active_stripe during reshape md has functionality to 'quiesce' and array so that all pending IO completed and no new IO starts. This is used to achieve a stable state before making internal changes. Currently this quiescing applies equally to normal IO, resync IO, and reshape IO. However there is a problem with applying it to reshape IO. Reshape can have multiple 'stripe_heads' that must be active together. If the quiesce come between allocating the first and the last of such a collection, then we deadlock, as the last will not be allocated until the quiesce is lifted, the quiesce will not be lifted until the first (which has been allocated) gets used, and that first cannot be used until the last is allocated. It is not necessary to inhibit reshape IO when a quiesce is requested. Those places in the code that require a full quiesce will ensure the reshape thread is not running at all. So allow reshape requests to get access to new stripe_heads without being blocked by a 'quiesce'. This only affects in-place reshapes (i.e. where the array does not grow or shrink) and these are only newly supported. So this patch is not needed in earlier kernels. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 75469e63ff1..59f2ec0759b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -362,7 +362,7 @@ static void raid5_unplug_device(struct request_queue *q); static struct stripe_head * get_active_stripe(raid5_conf_t *conf, sector_t sector, - int previous, int noblock) + int previous, int noblock, int noquiesce) { struct stripe_head *sh; @@ -372,7 +372,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector, do { wait_event_lock_irq(conf->wait_for_stripe, - conf->quiesce == 0, + conf->quiesce == 0 || noquiesce, conf->device_lock, /* nothing */); sh = __find_stripe(conf, sector, conf->generation - previous); if (!sh) { @@ -2671,7 +2671,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, sector_t bn = compute_blocknr(sh, i, 1); sector_t s = raid5_compute_sector(conf, bn, 0, &dd_idx, NULL); - sh2 = get_active_stripe(conf, s, 0, 1); + sh2 = get_active_stripe(conf, s, 0, 1, 1); if (sh2 == NULL) /* so far only the early blocks of this stripe * have been requested. When later blocks @@ -2944,7 +2944,7 @@ static bool handle_stripe5(struct stripe_head *sh) /* Finish reconstruct operations initiated by the expansion process */ if (sh->reconstruct_state == reconstruct_state_result) { struct stripe_head *sh2 - = get_active_stripe(conf, sh->sector, 1, 1); + = get_active_stripe(conf, sh->sector, 1, 1, 1); if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { /* sh cannot be written until sh2 has been read. * so arrange for sh to be delayed a little @@ -3189,7 +3189,7 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { struct stripe_head *sh2 - = get_active_stripe(conf, sh->sector, 1, 1); + = get_active_stripe(conf, sh->sector, 1, 1, 1); if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { /* sh cannot be written until sh2 has been read. * so arrange for sh to be delayed a little @@ -3675,7 +3675,7 @@ static int make_request(struct request_queue *q, struct bio * bi) (unsigned long long)logical_sector); sh = get_active_stripe(conf, new_sector, previous, - (bi->bi_rw&RWA_MASK)); + (bi->bi_rw&RWA_MASK), 0); if (sh) { if (unlikely(previous)) { /* expansion might have moved on while waiting for a @@ -3873,7 +3873,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) { int j; int skipped = 0; - sh = get_active_stripe(conf, stripe_addr+i, 0, 0); + sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1); set_bit(STRIPE_EXPANDING, &sh->state); atomic_inc(&conf->reshape_stripes); /* If any of this stripe is beyond the end of the old @@ -3922,7 +3922,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped if (last_sector >= mddev->dev_sectors) last_sector = mddev->dev_sectors - 1; while (first_sector <= last_sector) { - sh = get_active_stripe(conf, first_sector, 1, 0); + sh = get_active_stripe(conf, first_sector, 1, 0, 1); set_bit(STRIPE_EXPAND_SOURCE, &sh->state); set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); @@ -4022,9 +4022,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski bitmap_cond_end_sync(mddev->bitmap, sector_nr); - sh = get_active_stripe(conf, sector_nr, 0, 1); + sh = get_active_stripe(conf, sector_nr, 0, 1, 0); if (sh == NULL) { - sh = get_active_stripe(conf, sector_nr, 0, 0); + sh = get_active_stripe(conf, sector_nr, 0, 0, 0); /* make sure we don't swamp the stripe cache if someone else * is trying to get access */ @@ -4086,7 +4086,7 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) /* already done this stripe */ continue; - sh = get_active_stripe(conf, sector, 0, 1); + sh = get_active_stripe(conf, sector, 0, 1, 0); if (!sh) { /* failed to get a stripe - must wait */ -- cgit v1.2.3-18-g5258 From 0e6e0271a210817e202c8a4bfffbde3e3c0616d1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 16:32:22 +1000 Subject: md/raid5: fix bug in reshape code when chunk_size decreases. Now that we support changing the chunksize, we calculate "reshape_sectors" to be the max of number of sectors in old and new chunk size. However there is one please where we still use 'chunksize' rather than 'reshape_sectors'. This causes a reshape that reduces the size of chunks to freeze. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 59f2ec0759b..bb37fb1b2d8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3916,7 +3916,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped raid5_compute_sector(conf, stripe_addr*(new_data_disks), 1, &dd_idx, NULL); last_sector = - raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512) + raid5_compute_sector(conf, ((stripe_addr+reshape_sectors) *(new_data_disks) - 1), 1, &dd_idx, NULL); if (last_sector >= mddev->dev_sectors) -- cgit v1.2.3-18-g5258 From fdd7b4c3302c93f6833e338903ea77245eb510b4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 Jun 2009 04:01:02 -0700 Subject: r8169: fix crash when large packets are received Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC. ( original thread at http://lkml.org/lkml/2009/6/8/192 ) Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used) When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory. Fix is to tell to NIC what is the maximum size a frame can be. This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions. Reported-by: Michael Tokarev Signed-off-by: Eric Dumazet Tested-by: Michael Tokarev Signed-off-by: David S. Miller --- drivers/net/r8169.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 8247a945a1d..3b19e0ce290 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -66,7 +66,6 @@ static const int multicast_filter_limit = 32; #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ #define EarlyTxThld 0x3F /* 0x3F means NO early transmit */ -#define RxPacketMaxSize 0x3FE8 /* 16K - 1 - ETH_HLEN - VLAN - CRC... */ #define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */ #define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ @@ -2357,10 +2356,10 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) return cmd; } -static void rtl_set_rx_max_size(void __iomem *ioaddr) +static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, 16383); + RTL_W16(RxMaxSize, rx_buf_sz); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) @@ -2407,7 +2406,7 @@ static void rtl_hw_start_8169(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); if ((tp->mac_version == RTL_GIGA_MAC_VER_01) || (tp->mac_version == RTL_GIGA_MAC_VER_02) || @@ -2668,7 +2667,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1; @@ -2846,7 +2845,7 @@ static void rtl_hw_start_8101(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW; -- cgit v1.2.3-18-g5258 From 1d589bb16b825b3a7b4edd34d997f1f1f953033d Mon Sep 17 00:00:00 2001 From: john cooper Date: Tue, 9 Jun 2009 14:41:40 +0200 Subject: Add serial number support for virtio_blk, V4a This patch extracts the opaque data from pci i/o region 0 via the added VIRTIO_BLK_F_IDENTIFY field. By convention this data takes the form of that returned by an ATA IDENTIFY DEVICE command, however the driver (except for structure size) makes no interpretation of the data. The structure data is copied wholesale to userspace via a HDIO_GET_IDENTITY ioctl command (eg: hdparm -i ). Signed-off-by: john cooper Signed-off-by: Rusty Russell Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c4845b16946..c0facaa55cf 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -171,11 +171,43 @@ static void do_virtblk_request(struct request_queue *q) vblk->vq->vq_ops->kick(vblk->vq); } +/* return ATA identify data + */ +static int virtblk_identify(struct gendisk *disk, void *argp) +{ + struct virtio_blk *vblk = disk->private_data; + void *opaque; + int err = -ENOMEM; + + opaque = kmalloc(VIRTIO_BLK_ID_BYTES, GFP_KERNEL); + if (!opaque) + goto out; + + err = virtio_config_buf(vblk->vdev, VIRTIO_BLK_F_IDENTIFY, + offsetof(struct virtio_blk_config, identify), opaque, + VIRTIO_BLK_ID_BYTES); + + if (err) + goto out_kfree; + + if (copy_to_user(argp, opaque, VIRTIO_BLK_ID_BYTES)) + err = -EFAULT; + +out_kfree: + kfree(opaque); +out: + return err; +} + static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, unsigned long data) { struct gendisk *disk = bdev->bd_disk; struct virtio_blk *vblk = disk->private_data; + void __user *argp = (void __user *)data; + + if (cmd == HDIO_GET_IDENTITY) + return virtblk_identify(disk, argp); /* * Only allow the generic SCSI ioctls if the host can support it. @@ -183,8 +215,7 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode, if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI)) return -ENOIOCTLCMD; - return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, - (void __user *)data); + return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp); } /* We provide getgeo only to please some old bootloader/partitioning tools */ @@ -390,7 +421,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE, - VIRTIO_BLK_F_SCSI, + VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY }; static struct virtio_driver virtio_blk = { -- cgit v1.2.3-18-g5258 From eaa958402ea40851097d051f52ba1bb7a885efe9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 6 Jun 2009 14:51:36 -0700 Subject: cpumask: alloc zeroed cpumask for static cpumask_var_ts These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu Signed-off-by: Rusty Russell --- drivers/acpi/processor_core.c | 2 +- drivers/cpufreq/cpufreq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 45ad3288c5f..23f0fb84f1c 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -844,7 +844,7 @@ static int acpi_processor_add(struct acpi_device *device) if (!pr) return -ENOMEM; - if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { kfree(pr); return -ENOMEM; } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 47d2ad0ae07..6e2ec0b1894 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -808,7 +808,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = -ENOMEM; goto nomem_out; } - if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { free_cpumask_var(policy->cpus); kfree(policy); ret = -ENOMEM; -- cgit v1.2.3-18-g5258 From 55782138e47d9baf2f7d3a7af9e7cf42adf72c56 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 9 Jun 2009 13:43:05 +0800 Subject: tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- drivers/md/dm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e2ee4a79ea2..3fd8b1e6548 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -20,7 +20,8 @@ #include #include #include -#include + +#include #define DM_MSG_PREFIX "core" @@ -53,8 +54,6 @@ struct dm_target_io { union map_info info; }; -DEFINE_TRACE(block_bio_complete); - /* * For request-based dm. * One of these is allocated per request. -- cgit v1.2.3-18-g5258 From 96050dfb25966612008dcea7d342e91fa01e993c Mon Sep 17 00:00:00 2001 From: Peter Botha Date: Tue, 9 Jun 2009 17:16:32 -0700 Subject: char: mxser, fix ISA board lookup There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" Signed-off-by: Jiri Slaby Acked-by: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index a420e8d437d..13f8871e5b2 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -2711,7 +2711,7 @@ static int __init mxser_module_init(void) continue; brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(!ioaddr[b], brd); + retval = mxser_get_ISA_conf(ioaddr[b], brd); if (retval <= 0) { brd->info = NULL; continue; -- cgit v1.2.3-18-g5258 From 2b83868723d090078ac0e2120e06a1cc94dbaef0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 9 Jun 2009 20:40:25 -0700 Subject: Make /dev/zero reads interruptible by signals This helps with bad latencies for large reads from /dev/zero, but might conceivably break some application that "knows" that a read of /dev/zero cannot return early. So do this early in the merge window to give us maximal test coverage, even if the patch is totally trivial. Obviously, no well-behaved application should ever depend on the read being uninterruptible, but hey, bugs happen. Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 65e12bca657..f96d0bef855 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -694,9 +694,8 @@ static ssize_t read_zero(struct file * file, char __user * buf, written += chunk - unwritten; if (unwritten) break; - /* Consider changing this to just 'signal_pending()' with lots of testing */ - if (fatal_signal_pending(current)) - return written ? written : -EINTR; + if (signal_pending(current)) + return written ? written : -ERESTARTSYS; buf += chunk; count -= chunk; cond_resched(); -- cgit v1.2.3-18-g5258 From d357cbb445208ea0c33b268e08a65e53fdbb5e86 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 14 May 2009 17:49:28 +0200 Subject: edac: fold __func__ into edac_debug_printk This shortens debugfX() calls a bit. Reviewed-by: Mauro Carvalho Chehab CC: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/edac_core.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 6ad95c8d636..48d3b140983 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -76,10 +76,11 @@ extern int edac_debug_level; #ifndef CONFIG_EDAC_DEBUG_VERBOSE -#define edac_debug_printk(level, fmt, arg...) \ - do { \ - if (level <= edac_debug_level) \ - edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \ +#define edac_debug_printk(level, fmt, arg...) \ + do { \ + if (level <= edac_debug_level) \ + edac_printk(KERN_DEBUG, EDAC_DEBUG, \ + "%s: " fmt, __func__, ##arg); \ } while (0) #else /* CONFIG_EDAC_DEBUG_VERBOSE */ #define edac_debug_printk(level, fmt, arg...) \ -- cgit v1.2.3-18-g5258 From cfe40fdb4a46a68e45fa9a5ecbe588e94b89b4f3 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 4 May 2009 19:25:34 +0200 Subject: amd64_edac: add driver header Borislav: - remove register bit descriptions (complete text in BKDG) - cleanup and remove excessive/superfluous comments Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.h | 628 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 628 insertions(+) create mode 100644 drivers/edac/amd64_edac.h (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h new file mode 100644 index 00000000000..6f5d5d62cef --- /dev/null +++ b/drivers/edac/amd64_edac.h @@ -0,0 +1,628 @@ +/* + * AMD64 class Memory Controller kernel module + * + * Copyright (c) 2009 SoftwareBitMaker. + * Copyright (c) 2009 Advanced Micro Devices, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Originally Written by Thayne Harbaugh + * + * Changes by Douglas "norsk" Thompson : + * - K8 CPU Revision D and greater support + * + * Changes by Dave Peterson : + * - Module largely rewritten, with new (and hopefully correct) + * code for dealing with node and chip select interleaving, + * various code cleanup, and bug fixes + * - Added support for memory hoisting using DRAM hole address + * register + * + * Changes by Douglas "norsk" Thompson : + * -K8 Rev (1207) revision support added, required Revision + * specific mini-driver code to support Rev F as well as + * prior revisions + * + * Changes by Douglas "norsk" Thompson : + * -Family 10h revision support added. New PCI Device IDs, + * indicating new changes. Actual registers modified + * were slight, less than the Rev E to Rev F transition + * but changing the PCI Device ID was the proper thing to + * do, as it provides for almost automactic family + * detection. The mods to Rev F required more family + * information detection. + * + * Changes/Fixes by Borislav Petkov : + * - misc fixes and code cleanups + * + * This module is based on the following documents + * (available from http://www.amd.com/): + * + * Title: BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD + * Opteron Processors + * AMD publication #: 26094 + *` Revision: 3.26 + * + * Title: BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh + * Processors + * AMD publication #: 32559 + * Revision: 3.00 + * Issue Date: May 2006 + * + * Title: BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h + * Processors + * AMD publication #: 31116 + * Revision: 3.00 + * Issue Date: September 07, 2007 + * + * Sections in the first 2 documents are no longer in sync with each other. + * The Family 10h BKDG was totally re-written from scratch with a new + * presentation model. + * Therefore, comments that refer to a Document section might be off. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "edac_core.h" + +#define amd64_printk(level, fmt, arg...) \ + edac_printk(level, "amd64", fmt, ##arg) + +#define amd64_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg) + +/* + * Throughout the comments in this code, the following terms are used: + * + * SysAddr, DramAddr, and InputAddr + * + * These terms come directly from the amd64 documentation + * (AMD publication #26094). They are defined as follows: + * + * SysAddr: + * This is a physical address generated by a CPU core or a device + * doing DMA. If generated by a CPU core, a SysAddr is the result of + * a virtual to physical address translation by the CPU core's address + * translation mechanism (MMU). + * + * DramAddr: + * A DramAddr is derived from a SysAddr by subtracting an offset that + * depends on which node the SysAddr maps to and whether the SysAddr + * is within a range affected by memory hoisting. The DRAM Base + * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers + * determine which node a SysAddr maps to. + * + * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr + * is within the range of addresses specified by this register, then + * a value x from the DHAR is subtracted from the SysAddr to produce a + * DramAddr. Here, x represents the base address for the node that + * the SysAddr maps to plus an offset due to memory hoisting. See + * section 3.4.8 and the comments in amd64_get_dram_hole_info() and + * sys_addr_to_dram_addr() below for more information. + * + * If the SysAddr is not affected by the DHAR then a value y is + * subtracted from the SysAddr to produce a DramAddr. Here, y is the + * base address for the node that the SysAddr maps to. See section + * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more + * information. + * + * InputAddr: + * A DramAddr is translated to an InputAddr before being passed to the + * memory controller for the node that the DramAddr is associated + * with. The memory controller then maps the InputAddr to a csrow. + * If node interleaving is not in use, then the InputAddr has the same + * value as the DramAddr. Otherwise, the InputAddr is produced by + * discarding the bits used for node interleaving from the DramAddr. + * See section 3.4.4 for more information. + * + * The memory controller for a given node uses its DRAM CS Base and + * DRAM CS Mask registers to map an InputAddr to a csrow. See + * sections 3.5.4 and 3.5.5 for more information. + */ + +#define EDAC_AMD64_VERSION " Ver: 3.2.0 " __DATE__ +#define EDAC_MOD_STR "amd64_edac" + +/* Extended Model from CPUID, for CPU Revision numbers */ +#define OPTERON_CPU_LE_REV_C 0 +#define OPTERON_CPU_REV_D 1 +#define OPTERON_CPU_REV_E 2 + +/* NPT processors have the following Extended Models */ +#define OPTERON_CPU_REV_F 4 +#define OPTERON_CPU_REV_FA 5 + +/* Hardware limit on ChipSelect rows per MC and processors per system */ +#define CHIPSELECT_COUNT 8 +#define DRAM_REG_COUNT 8 + + +/* + * PCI-defined configuration space registers + */ + + +/* + * Function 1 - Address Map + */ +#define K8_DRAM_BASE_LOW 0x40 +#define K8_DRAM_LIMIT_LOW 0x44 +#define K8_DHAR 0xf0 + +#define DHAR_VALID BIT(0) +#define F10_DRAM_MEM_HOIST_VALID BIT(1) + +#define DHAR_BASE_MASK 0xff000000 +#define dhar_base(dhar) (dhar & DHAR_BASE_MASK) + +#define K8_DHAR_OFFSET_MASK 0x0000ff00 +#define k8_dhar_offset(dhar) ((dhar & K8_DHAR_OFFSET_MASK) << 16) + +#define F10_DHAR_OFFSET_MASK 0x0000ff80 + /* NOTE: Extra mask bit vs K8 */ +#define f10_dhar_offset(dhar) ((dhar & F10_DHAR_OFFSET_MASK) << 16) + + +/* F10 High BASE/LIMIT registers */ +#define F10_DRAM_BASE_HIGH 0x140 +#define F10_DRAM_LIMIT_HIGH 0x144 + + +/* + * Function 2 - DRAM controller + */ +#define K8_DCSB0 0x40 +#define F10_DCSB1 0x140 + +#define K8_DCSB_CS_ENABLE BIT(0) +#define K8_DCSB_NPT_SPARE BIT(1) +#define K8_DCSB_NPT_TESTFAIL BIT(2) + +/* + * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form + * the address + */ +#define REV_E_DCSB_BASE_BITS (0xFFE0FE00ULL) +#define REV_E_DCS_SHIFT 4 +#define REV_E_DCSM_COUNT 8 + +#define REV_F_F1Xh_DCSB_BASE_BITS (0x1FF83FE0ULL) +#define REV_F_F1Xh_DCS_SHIFT 8 + +/* + * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount + * to form the address + */ +#define REV_F_DCSB_BASE_BITS (0x1FF83FE0ULL) +#define REV_F_DCS_SHIFT 8 +#define REV_F_DCSM_COUNT 4 +#define F10_DCSM_COUNT 4 +#define F11_DCSM_COUNT 2 + +/* DRAM CS Mask Registers */ +#define K8_DCSM0 0x60 +#define F10_DCSM1 0x160 + +/* REV E: select [29:21] and [15:9] from DCSM */ +#define REV_E_DCSM_MASK_BITS 0x3FE0FE00 + +/* unused bits [24:20] and [12:0] */ +#define REV_E_DCS_NOTUSED_BITS 0x01F01FFF + +/* REV F and later: select [28:19] and [13:5] from DCSM */ +#define REV_F_F1Xh_DCSM_MASK_BITS 0x1FF83FE0 + +/* unused bits [26:22] and [12:0] */ +#define REV_F_F1Xh_DCS_NOTUSED_BITS 0x07C01FFF + +#define DBAM0 0x80 +#define DBAM1 0x180 + +/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */ +#define DBAM_DIMM(i, reg) ((((reg) >> (4*i))) & 0xF) + +#define DBAM_MAX_VALUE 11 + + +#define F10_DCLR_0 0x90 +#define F10_DCLR_1 0x190 +#define REVE_WIDTH_128 BIT(16) +#define F10_WIDTH_128 BIT(11) + + +#define F10_DCHR_0 0x94 +#define F10_DCHR_1 0x194 + +#define F10_DCHR_FOUR_RANK_DIMM BIT(18) +#define F10_DCHR_Ddr3Mode BIT(8) +#define F10_DCHR_MblMode BIT(6) + + +#define F10_DCTL_SEL_LOW 0x110 + +#define dct_sel_baseaddr(pvt) \ + ((pvt->dram_ctl_select_low) & 0xFFFFF800) + +#define dct_sel_interleave_addr(pvt) \ + (((pvt->dram_ctl_select_low) >> 6) & 0x3) + +enum { + F10_DCTL_SEL_LOW_DctSelHiRngEn = BIT(0), + F10_DCTL_SEL_LOW_DctSelIntLvEn = BIT(2), + F10_DCTL_SEL_LOW_DctGangEn = BIT(4), + F10_DCTL_SEL_LOW_DctDatIntLv = BIT(5), + F10_DCTL_SEL_LOW_DramEnable = BIT(8), + F10_DCTL_SEL_LOW_MemCleared = BIT(10), +}; + +#define dct_high_range_enabled(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn) + +#define dct_interleave_enabled(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn) + +#define dct_ganging_enabled(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn) + +#define dct_data_intlv_enabled(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv) + +#define dct_dram_enabled(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable) + +#define dct_memory_cleared(pvt) \ + (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared) + + +#define F10_DCTL_SEL_HIGH 0x114 + + +/* + * Function 3 - Misc Control + */ +#define K8_NBCTL 0x40 + +/* Correctable ECC error reporting enable */ +#define K8_NBCTL_CECCEn BIT(0) + +/* UnCorrectable ECC error reporting enable */ +#define K8_NBCTL_UECCEn BIT(1) + +#define K8_NBCFG 0x44 +#define K8_NBCFG_CHIPKILL BIT(23) +#define K8_NBCFG_ECC_ENABLE BIT(22) + +#define K8_NBSL 0x48 + + +#define EXTRACT_HIGH_SYNDROME(x) (((x) >> 24) & 0xff) +#define EXTRACT_EXT_ERROR_CODE(x) (((x) >> 16) & 0x1f) + +/* Family F10h: Normalized Extended Error Codes */ +#define F10_NBSL_EXT_ERR_RES 0x0 +#define F10_NBSL_EXT_ERR_CRC 0x1 +#define F10_NBSL_EXT_ERR_SYNC 0x2 +#define F10_NBSL_EXT_ERR_MST 0x3 +#define F10_NBSL_EXT_ERR_TGT 0x4 +#define F10_NBSL_EXT_ERR_GART 0x5 +#define F10_NBSL_EXT_ERR_RMW 0x6 +#define F10_NBSL_EXT_ERR_WDT 0x7 +#define F10_NBSL_EXT_ERR_ECC 0x8 +#define F10_NBSL_EXT_ERR_DEV 0x9 +#define F10_NBSL_EXT_ERR_LINK_DATA 0xA + +/* Next two are overloaded values */ +#define F10_NBSL_EXT_ERR_LINK_PROTO 0xB +#define F10_NBSL_EXT_ERR_L3_PROTO 0xB + +#define F10_NBSL_EXT_ERR_NB_ARRAY 0xC +#define F10_NBSL_EXT_ERR_DRAM_PARITY 0xD +#define F10_NBSL_EXT_ERR_LINK_RETRY 0xE + +/* Next two are overloaded values */ +#define F10_NBSL_EXT_ERR_GART_WALK 0xF +#define F10_NBSL_EXT_ERR_DEV_WALK 0xF + +/* 0x10 to 0x1B: Reserved */ +#define F10_NBSL_EXT_ERR_L3_DATA 0x1C +#define F10_NBSL_EXT_ERR_L3_TAG 0x1D +#define F10_NBSL_EXT_ERR_L3_LRU 0x1E + +/* K8: Normalized Extended Error Codes */ +#define K8_NBSL_EXT_ERR_ECC 0x0 +#define K8_NBSL_EXT_ERR_CRC 0x1 +#define K8_NBSL_EXT_ERR_SYNC 0x2 +#define K8_NBSL_EXT_ERR_MST 0x3 +#define K8_NBSL_EXT_ERR_TGT 0x4 +#define K8_NBSL_EXT_ERR_GART 0x5 +#define K8_NBSL_EXT_ERR_RMW 0x6 +#define K8_NBSL_EXT_ERR_WDT 0x7 +#define K8_NBSL_EXT_ERR_CHIPKILL_ECC 0x8 +#define K8_NBSL_EXT_ERR_DRAM_PARITY 0xD + +#define EXTRACT_ERROR_CODE(x) ((x) & 0xffff) +#define TEST_TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010) +#define TEST_MEM_ERROR(x) (((x) & 0xFF00) == 0x0100) +#define TEST_BUS_ERROR(x) (((x) & 0xF800) == 0x0800) +#define EXTRACT_TT_CODE(x) (((x) >> 2) & 0x3) +#define EXTRACT_II_CODE(x) (((x) >> 2) & 0x3) +#define EXTRACT_LL_CODE(x) (((x) >> 0) & 0x3) +#define EXTRACT_RRRR_CODE(x) (((x) >> 4) & 0xf) +#define EXTRACT_TO_CODE(x) (((x) >> 8) & 0x1) +#define EXTRACT_PP_CODE(x) (((x) >> 9) & 0x3) + +/* + * The following are for BUS type errors AFTER values have been normalized by + * shifting right + */ +#define K8_NBSL_PP_SRC 0x0 +#define K8_NBSL_PP_RES 0x1 +#define K8_NBSL_PP_OBS 0x2 +#define K8_NBSL_PP_GENERIC 0x3 + + +#define K8_NBSH 0x4C + +#define K8_NBSH_VALID_BIT BIT(31) +#define K8_NBSH_OVERFLOW BIT(30) +#define K8_NBSH_UNCORRECTED_ERR BIT(29) +#define K8_NBSH_ERR_ENABLE BIT(28) +#define K8_NBSH_MISC_ERR_VALID BIT(27) +#define K8_NBSH_VALID_ERROR_ADDR BIT(26) +#define K8_NBSH_PCC BIT(25) +#define K8_NBSH_CECC BIT(14) +#define K8_NBSH_UECC BIT(13) +#define K8_NBSH_ERR_SCRUBER BIT(8) +#define K8_NBSH_CORE3 BIT(3) +#define K8_NBSH_CORE2 BIT(2) +#define K8_NBSH_CORE1 BIT(1) +#define K8_NBSH_CORE0 BIT(0) + +#define EXTRACT_LDT_LINK(x) (((x) >> 4) & 0x7) +#define EXTRACT_ERR_CPU_MAP(x) ((x) & 0xF) +#define EXTRACT_LOW_SYNDROME(x) (((x) >> 15) & 0xff) + + +#define K8_NBEAL 0x50 +#define K8_NBEAH 0x54 +#define K8_SCRCTRL 0x58 + +#define F10_NB_CFG_LOW 0x88 +#define F10_NB_CFG_LOW_ENABLE_EXT_CFG BIT(14) + +#define F10_NB_CFG_HIGH 0x8C + +#define F10_ONLINE_SPARE 0xB0 +#define F10_ONLINE_SPARE_SWAPDONE0(x) ((x) & BIT(1)) +#define F10_ONLINE_SPARE_SWAPDONE1(x) ((x) & BIT(3)) +#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007) +#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007) + +#define F10_NB_ARRAY_ADDR 0xB8 + +#define F10_NB_ARRAY_DRAM_ECC 0x80000000 + +/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */ +#define SET_NB_ARRAY_ADDRESS(section) (((section) & 0x3) << 1) + +#define F10_NB_ARRAY_DATA 0xBC + +#define SET_NB_DRAM_INJECTION_WRITE(word, bits) \ + (BIT(((word) & 0xF) + 20) | \ + BIT(17) | \ + ((bits) & 0xF)) + +#define SET_NB_DRAM_INJECTION_READ(word, bits) \ + (BIT(((word) & 0xF) + 20) | \ + BIT(16) | \ + ((bits) & 0xF)) + +#define K8_NBCAP 0xE8 +#define K8_NBCAP_CORES (BIT(12)|BIT(13)) +#define K8_NBCAP_CHIPKILL BIT(4) +#define K8_NBCAP_SECDED BIT(3) +#define K8_NBCAP_8_NODE BIT(2) +#define K8_NBCAP_DUAL_NODE BIT(1) +#define K8_NBCAP_DCT_DUAL BIT(0) + +/* + * MSR Regs + */ +#define K8_MSR_MCGCTL 0x017b +#define K8_MSR_MCGCTL_NBE BIT(4) + +#define K8_MSR_MC4CTL 0x0410 +#define K8_MSR_MC4STAT 0x0411 +#define K8_MSR_MC4ADDR 0x0412 + +/* AMD sets the first MC device at device ID 0x18. */ +static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev) +{ + return PCI_SLOT(pdev->devfn) - 0x18; +} + +enum amd64_chipset_families { + K8_CPUS = 0, + F10_CPUS, + F11_CPUS, +}; + +/* + * Structure to hold: + * + * 1) dynamically read status and error address HW registers + * 2) sysfs entered values + * 3) MCE values + * + * Depends on entry into the modules + */ +struct amd64_error_info_regs { + u32 nbcfg; + u32 nbsh; + u32 nbsl; + u32 nbeah; + u32 nbeal; +}; + +/* Error injection control structure */ +struct error_injection { + u32 section; + u32 word; + u32 bit_map; +}; + +struct amd64_pvt { + /* pci_device handles which we utilize */ + struct pci_dev *addr_f1_ctl; + struct pci_dev *dram_f2_ctl; + struct pci_dev *misc_f3_ctl; + + int mc_node_id; /* MC index of this MC node */ + int ext_model; /* extended model value of this node */ + + struct low_ops *ops; /* pointer to per PCI Device ID func table */ + + int channel_count; + + /* Raw registers */ + u32 dclr0; /* DRAM Configuration Low DCT0 reg */ + u32 dclr1; /* DRAM Configuration Low DCT1 reg */ + u32 dchr0; /* DRAM Configuration High DCT0 reg */ + u32 dchr1; /* DRAM Configuration High DCT1 reg */ + u32 nbcap; /* North Bridge Capabilities */ + u32 nbcfg; /* F10 North Bridge Configuration */ + u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */ + u32 dhar; /* DRAM Hoist reg */ + u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */ + u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ + + /* DRAM CS Base Address Registers F2x[1,0][5C:40] */ + u32 dcsb0[CHIPSELECT_COUNT]; + u32 dcsb1[CHIPSELECT_COUNT]; + + /* DRAM CS Mask Registers F2x[1,0][6C:60] */ + u32 dcsm0[CHIPSELECT_COUNT]; + u32 dcsm1[CHIPSELECT_COUNT]; + + /* + * Decoded parts of DRAM BASE and LIMIT Registers + * F1x[78,70,68,60,58,50,48,40] + */ + u64 dram_base[DRAM_REG_COUNT]; + u64 dram_limit[DRAM_REG_COUNT]; + u8 dram_IntlvSel[DRAM_REG_COUNT]; + u8 dram_IntlvEn[DRAM_REG_COUNT]; + u8 dram_DstNode[DRAM_REG_COUNT]; + u8 dram_rw_en[DRAM_REG_COUNT]; + + /* + * The following fields are set at (load) run time, after CPU revision + * has been determined, since the dct_base and dct_mask registers vary + * based on revision + */ + u32 dcsb_base; /* DCSB base bits */ + u32 dcsm_mask; /* DCSM mask bits */ + u32 num_dcsm; /* Number of DCSM registers */ + u32 dcs_mask_notused; /* DCSM notused mask bits */ + u32 dcs_shift; /* DCSB and DCSM shift value */ + + u64 top_mem; /* top of memory below 4GB */ + u64 top_mem2; /* top of memory above 4GB */ + + u32 dram_ctl_select_low; /* DRAM Controller Select Low Reg */ + u32 dram_ctl_select_high; /* DRAM Controller Select High Reg */ + u32 online_spare; /* On-Line spare Reg */ + + /* temp storage for when input is received from sysfs */ + struct amd64_error_info_regs ctl_error_info; + + /* place to store error injection parameters prior to issue */ + struct error_injection injection; + + /* Save old hw registers' values before we modified them */ + u32 nbctl_mcgctl_saved; /* When true, following 2 are valid */ + u32 old_nbctl; + u32 *old_mcgctl; /* per core on this node */ + + /* MC Type Index value: socket F vs Family 10h */ + u32 mc_type_index; + + /* misc settings */ + struct flags { + unsigned long cf8_extcfg:1; + } flags; +}; + +struct scrubrate { + u32 scrubval; /* bit pattern for scrub rate */ + u32 bandwidth; /* bandwidth consumed (bytes/sec) */ +}; + +extern struct scrubrate scrubrates[23]; +extern u32 revf_quad_ddr2_shift[16]; +extern const char *tt_msgs[4]; +extern const char *ll_msgs[4]; +extern const char *rrrr_msgs[16]; +extern const char *to_msgs[2]; +extern const char *pp_msgs[4]; +extern const char *ii_msgs[4]; +extern const char *ext_msgs[32]; +extern const char *htlink_msgs[8]; + +/* + * Each of the PCI Device IDs types have their own set of hardware accessor + * functions and per device encoding/decoding logic. + */ +struct low_ops { + int (*probe_valid_hardware)(struct amd64_pvt *pvt); + int (*early_channel_count)(struct amd64_pvt *pvt); + + u64 (*get_error_address)(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info); + void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram); + void (*read_dram_ctl_register)(struct amd64_pvt *pvt); + void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + u64 SystemAddr); + int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map); +}; + +struct amd64_family_type { + const char *ctl_name; + u16 addr_f1_ctl; + u16 misc_f3_ctl; + struct low_ops ops; +}; + +static struct amd64_family_type amd64_family_types[]; + +static inline const char *get_amd_family_name(int index) +{ + return amd64_family_types[index].ctl_name; +} + +static inline struct low_ops *family_ops(int index) +{ + return &amd64_family_types[index].ops; +} + +/* + * For future CPU versions, verify the following as new 'slow' rates appear and + * modify the necessary skip values for the supported CPU. + */ +#define K8_MIN_SCRUB_RATE_BITS 0x0 +#define F10_MIN_SCRUB_RATE_BITS 0x5 +#define F11_MIN_SCRUB_RATE_BITS 0x6 + +int amd64_process_error_info(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + int handle_errors); +int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, + u64 *hole_offset, u64 *hole_size); -- cgit v1.2.3-18-g5258 From fd3d6780f7358225a6ea1ffb1bb8fd8b2d6df446 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 19:50:23 +0200 Subject: amd64_edac: add debugging/testing code This is for dumping different registers and testing the address mapping logic using the ECC syndromes. Borislav: - split sysfs attrs per file - use more conform names for the sysfs attrs - fix function return value patterns - cleanup/fix comments - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac_dbg.c | 255 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 255 insertions(+) create mode 100644 drivers/edac/amd64_edac_dbg.c (limited to 'drivers') diff --git a/drivers/edac/amd64_edac_dbg.c b/drivers/edac/amd64_edac_dbg.c new file mode 100644 index 00000000000..0a41b248a4a --- /dev/null +++ b/drivers/edac/amd64_edac_dbg.c @@ -0,0 +1,255 @@ +#include "amd64_edac.h" + +/* + * accept a hex value and store it into the virtual error register file, field: + * nbeal and nbeah. Assume virtual error values have already been set for: NBSL, + * NBSH and NBCFG. Then proceed to map the error values to a MC, CSROW and + * CHANNEL + */ +static ssize_t amd64_nbea_store(struct mem_ctl_info *mci, const char *data, + size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long long value; + int ret = 0; + + ret = strict_strtoull(data, 16, &value); + if (ret != -EINVAL) { + debugf0("received NBEA= 0x%llx\n", value); + + /* place the value into the virtual error packet */ + pvt->ctl_error_info.nbeal = (u32) value; + value >>= 32; + pvt->ctl_error_info.nbeah = (u32) value; + + /* Process the Mapping request */ + /* TODO: Add race prevention */ + amd64_process_error_info(mci, &pvt->ctl_error_info, 1); + + return count; + } + return ret; +} + +/* display back what the last NBEA (MCA NB Address (MC4_ADDR)) was written */ +static ssize_t amd64_nbea_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u64 value; + + value = pvt->ctl_error_info.nbeah; + value <<= 32; + value |= pvt->ctl_error_info.nbeal; + + return sprintf(data, "%llx\n", value); +} + +/* store the NBSL (MCA NB Status Low (MC4_STATUS)) value user desires */ +static ssize_t amd64_nbsl_store(struct mem_ctl_info *mci, const char *data, + size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 16, &value); + if (ret != -EINVAL) { + debugf0("received NBSL= 0x%lx\n", value); + + pvt->ctl_error_info.nbsl = (u32) value; + + return count; + } + return ret; +} + +/* display back what the last NBSL value written */ +static ssize_t amd64_nbsl_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 value; + + value = pvt->ctl_error_info.nbsl; + + return sprintf(data, "%x\n", value); +} + +/* store the NBSH (MCA NB Status High) value user desires */ +static ssize_t amd64_nbsh_store(struct mem_ctl_info *mci, const char *data, + size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 16, &value); + if (ret != -EINVAL) { + debugf0("received NBSH= 0x%lx\n", value); + + pvt->ctl_error_info.nbsh = (u32) value; + + return count; + } + return ret; +} + +/* display back what the last NBSH value written */ +static ssize_t amd64_nbsh_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 value; + + value = pvt->ctl_error_info.nbsh; + + return sprintf(data, "%x\n", value); +} + +/* accept and store the NBCFG (MCA NB Configuration) value user desires */ +static ssize_t amd64_nbcfg_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 16, &value); + if (ret != -EINVAL) { + debugf0("received NBCFG= 0x%lx\n", value); + + pvt->ctl_error_info.nbcfg = (u32) value; + + return count; + } + return ret; +} + +/* various show routines for the controls of a MCI */ +static ssize_t amd64_nbcfg_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return sprintf(data, "%x\n", pvt->ctl_error_info.nbcfg); +} + + +static ssize_t amd64_dhar_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return sprintf(data, "%x\n", pvt->dhar); +} + + +static ssize_t amd64_dbam_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return sprintf(data, "%x\n", pvt->dbam0); +} + + +static ssize_t amd64_topmem_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return sprintf(data, "%llx\n", pvt->top_mem); +} + + +static ssize_t amd64_topmem2_show(struct mem_ctl_info *mci, char *data) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return sprintf(data, "%llx\n", pvt->top_mem2); +} + +static ssize_t amd64_hole_show(struct mem_ctl_info *mci, char *data) +{ + u64 hole_base = 0; + u64 hole_offset = 0; + u64 hole_size = 0; + + amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size); + + return sprintf(data, "%llx %llx %llx\n", hole_base, hole_offset, + hole_size); +} + +/* + * update NUM_DBG_ATTRS in case you add new members + */ +struct mcidev_sysfs_attribute amd64_dbg_attrs[] = { + + { + .attr = { + .name = "nbea_ctl", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = amd64_nbea_show, + .store = amd64_nbea_store, + }, + { + .attr = { + .name = "nbsl_ctl", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = amd64_nbsl_show, + .store = amd64_nbsl_store, + }, + { + .attr = { + .name = "nbsh_ctl", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = amd64_nbsh_show, + .store = amd64_nbsh_store, + }, + { + .attr = { + .name = "nbcfg_ctl", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = amd64_nbcfg_show, + .store = amd64_nbcfg_store, + }, + { + .attr = { + .name = "dhar", + .mode = (S_IRUGO) + }, + .show = amd64_dhar_show, + .store = NULL, + }, + { + .attr = { + .name = "dbam", + .mode = (S_IRUGO) + }, + .show = amd64_dbam_show, + .store = NULL, + }, + { + .attr = { + .name = "topmem", + .mode = (S_IRUGO) + }, + .show = amd64_topmem_show, + .store = NULL, + }, + { + .attr = { + .name = "topmem2", + .mode = (S_IRUGO) + }, + .show = amd64_topmem2_show, + .store = NULL, + }, + { + .attr = { + .name = "dram_hole", + .mode = (S_IRUGO) + }, + .show = amd64_hole_show, + .store = NULL, + }, +}; -- cgit v1.2.3-18-g5258 From eb919690be994386eac326f8c53c4540602de563 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Tue, 5 May 2009 20:07:11 +0200 Subject: amd64_edac: add DRAM error injection logic using sysfs Borislav: - rename sysfs attrs to more conform names - cleanup/fix comments according to BKDG text - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac_inj.c | 185 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100644 drivers/edac/amd64_edac_inj.c (limited to 'drivers') diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c new file mode 100644 index 00000000000..d3675b76b3a --- /dev/null +++ b/drivers/edac/amd64_edac_inj.c @@ -0,0 +1,185 @@ +#include "amd64_edac.h" + +/* + * store error injection section value which refers to one of 4 16-byte sections + * within a 64-byte cacheline + * + * range: 0..3 + */ +static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 10, &value); + if (ret != -EINVAL) { + pvt->injection.section = (u32) value; + return count; + } + return ret; +} + +/* + * store error injection word value which refers to one of 9 16-bit word of the + * 16-byte (128-bit + ECC bits) section + * + * range: 0..8 + */ +static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 10, &value); + if (ret != -EINVAL) { + + value = (value <= 8) ? value : 0; + pvt->injection.word = (u32) value; + + return count; + } + return ret; +} + +/* + * store 16 bit error injection vector which enables injecting errors to the + * corresponding bit within the error injection word above. When used during a + * DRAM ECC read, it holds the contents of the of the DRAM ECC bits. + */ +static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret = 0; + + ret = strict_strtoul(data, 16, &value); + if (ret != -EINVAL) { + + pvt->injection.bit_map = (u32) value & 0xFFFF; + + return count; + } + return ret; +} + +/* + * Do a DRAM ECC read. Assemble staged values in the pvt area, format into + * fields needed by the injection registers and read the NB Array Data Port. + */ +static ssize_t amd64_inject_read_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + u32 section, word_bits; + int ret = 0; + + ret = strict_strtoul(data, 10, &value); + if (ret != -EINVAL) { + + /* Form value to choose 16-byte section of cacheline */ + section = F10_NB_ARRAY_DRAM_ECC | + SET_NB_ARRAY_ADDRESS(pvt->injection.section); + pci_write_config_dword(pvt->misc_f3_ctl, + F10_NB_ARRAY_ADDR, section); + + word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word, + pvt->injection.bit_map); + + /* Issue 'word' and 'bit' along with the READ request */ + pci_write_config_dword(pvt->misc_f3_ctl, + F10_NB_ARRAY_DATA, word_bits); + + debugf0("section=0x%x word_bits=0x%x\n", section, word_bits); + + return count; + } + return ret; +} + +/* + * Do a DRAM ECC write. Assemble staged values in the pvt area and format into + * fields needed by the injection registers. + */ +static ssize_t amd64_inject_write_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + u32 section, word_bits; + int ret = 0; + + ret = strict_strtoul(data, 10, &value); + if (ret != -EINVAL) { + + /* Form value to choose 16-byte section of cacheline */ + section = F10_NB_ARRAY_DRAM_ECC | + SET_NB_ARRAY_ADDRESS(pvt->injection.section); + pci_write_config_dword(pvt->misc_f3_ctl, + F10_NB_ARRAY_ADDR, section); + + word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word, + pvt->injection.bit_map); + + /* Issue 'word' and 'bit' along with the READ request */ + pci_write_config_dword(pvt->misc_f3_ctl, + F10_NB_ARRAY_DATA, word_bits); + + debugf0("section=0x%x word_bits=0x%x\n", section, word_bits); + + return count; + } + return ret; +} + +/* + * update NUM_INJ_ATTRS in case you add new members + */ +struct mcidev_sysfs_attribute amd64_inj_attrs[] = { + + { + .attr = { + .name = "inject_section", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = NULL, + .store = amd64_inject_section_store, + }, + { + .attr = { + .name = "inject_word", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = NULL, + .store = amd64_inject_word_store, + }, + { + .attr = { + .name = "inject_ecc_vector", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = NULL, + .store = amd64_inject_ecc_vector_store, + }, + { + .attr = { + .name = "inject_write", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = NULL, + .store = amd64_inject_write_store, + }, + { + .attr = { + .name = "inject_read", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = NULL, + .store = amd64_inject_read_store, + }, +}; -- cgit v1.2.3-18-g5258 From b52401cecedf669211f0b7a5095abcb6d3fc82c2 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Wed, 6 May 2009 17:57:20 +0200 Subject: amd64_edac: add MCA error types Borislav: - cleanup comments Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac_err_types.c | 161 ++++++++++++++++++++++++++++++++++++ 1 file changed, 161 insertions(+) create mode 100644 drivers/edac/amd64_edac_err_types.c (limited to 'drivers') diff --git a/drivers/edac/amd64_edac_err_types.c b/drivers/edac/amd64_edac_err_types.c new file mode 100644 index 00000000000..f212ff12a9d --- /dev/null +++ b/drivers/edac/amd64_edac_err_types.c @@ -0,0 +1,161 @@ +#include "amd64_edac.h" + +/* + * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only + * for DDR2 DRAM mapping. + */ +u32 revf_quad_ddr2_shift[] = { + 0, /* 0000b NULL DIMM (128mb) */ + 28, /* 0001b 256mb */ + 29, /* 0010b 512mb */ + 29, /* 0011b 512mb */ + 29, /* 0100b 512mb */ + 30, /* 0101b 1gb */ + 30, /* 0110b 1gb */ + 31, /* 0111b 2gb */ + 31, /* 1000b 2gb */ + 32, /* 1001b 4gb */ + 32, /* 1010b 4gb */ + 33, /* 1011b 8gb */ + 0, /* 1100b future */ + 0, /* 1101b future */ + 0, /* 1110b future */ + 0 /* 1111b future */ +}; + +/* + * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing + * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching- + * or higher value'. + * + *FIXME: Produce a better mapping/linearisation. + */ + +struct scrubrate scrubrates[] = { + { 0x01, 1600000000UL}, + { 0x02, 800000000UL}, + { 0x03, 400000000UL}, + { 0x04, 200000000UL}, + { 0x05, 100000000UL}, + { 0x06, 50000000UL}, + { 0x07, 25000000UL}, + { 0x08, 12284069UL}, + { 0x09, 6274509UL}, + { 0x0A, 3121951UL}, + { 0x0B, 1560975UL}, + { 0x0C, 781440UL}, + { 0x0D, 390720UL}, + { 0x0E, 195300UL}, + { 0x0F, 97650UL}, + { 0x10, 48854UL}, + { 0x11, 24427UL}, + { 0x12, 12213UL}, + { 0x13, 6101UL}, + { 0x14, 3051UL}, + { 0x15, 1523UL}, + { 0x16, 761UL}, + { 0x00, 0UL}, /* scrubbing off */ +}; + +/* + * string representation for the different MCA reported error types, see F3x48 + * or MSR0000_0411. + */ +const char *tt_msgs[] = { /* transaction type */ + "instruction", + "data", + "generic", + "reserved" +}; + +const char *ll_msgs[] = { /* cache level */ + "L0", + "L1", + "L2", + "L3/generic" +}; + +const char *rrrr_msgs[] = { + "generic", + "generic read", + "generic write", + "data read", + "data write", + "inst fetch", + "prefetch", + "evict", + "snoop", + "reserved RRRR= 9", + "reserved RRRR= 10", + "reserved RRRR= 11", + "reserved RRRR= 12", + "reserved RRRR= 13", + "reserved RRRR= 14", + "reserved RRRR= 15" +}; + +const char *pp_msgs[] = { /* participating processor */ + "local node originated (SRC)", + "local node responded to request (RES)", + "local node observed as 3rd party (OBS)", + "generic" +}; + +const char *to_msgs[] = { + "no timeout", + "timed out" +}; + +const char *ii_msgs[] = { /* memory or i/o */ + "mem access", + "reserved", + "i/o access", + "generic" +}; + +/* Map the 5 bits of Extended Error code to the string table. */ +const char *ext_msgs[] = { /* extended error */ + "K8 ECC error/F10 reserved", /* 0_0000b */ + "CRC error", /* 0_0001b */ + "sync error", /* 0_0010b */ + "mst abort", /* 0_0011b */ + "tgt abort", /* 0_0100b */ + "GART error", /* 0_0101b */ + "RMW error", /* 0_0110b */ + "Wdog timer error", /* 0_0111b */ + "F10-ECC/K8-Chipkill error", /* 0_1000b */ + "DEV Error", /* 0_1001b */ + "Link Data error", /* 0_1010b */ + "Link or L3 Protocol error", /* 0_1011b */ + "NB Array error", /* 0_1100b */ + "DRAM Parity error", /* 0_1101b */ + "Link Retry/GART Table Walk/DEV Table Walk error", /* 0_1110b */ + "Res 0x0ff error", /* 0_1111b */ + "Res 0x100 error", /* 1_0000b */ + "Res 0x101 error", /* 1_0001b */ + "Res 0x102 error", /* 1_0010b */ + "Res 0x103 error", /* 1_0011b */ + "Res 0x104 error", /* 1_0100b */ + "Res 0x105 error", /* 1_0101b */ + "Res 0x106 error", /* 1_0110b */ + "Res 0x107 error", /* 1_0111b */ + "Res 0x108 error", /* 1_1000b */ + "Res 0x109 error", /* 1_1001b */ + "Res 0x10A error", /* 1_1010b */ + "Res 0x10B error", /* 1_1011b */ + "L3 Cache Data error", /* 1_1100b */ + "L3 CacheTag error", /* 1_1101b */ + "L3 Cache LRU error", /* 1_1110b */ + "Res 0x1FF error" /* 1_1111b */ +}; + +const char *htlink_msgs[] = { + "none", + "1", + "2", + "1 2", + "3", + "1 3", + "2 3", + "1 2 3" +}; -- cgit v1.2.3-18-g5258 From 2bc65418724a0ddbb20c9eeb9de8285af7748c16 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 4 May 2009 20:11:14 +0200 Subject: amd64_edac: add memory scrubber interface Borislav: - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 130 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 drivers/edac/amd64_edac.c (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c new file mode 100644 index 00000000000..6876d435979 --- /dev/null +++ b/drivers/edac/amd64_edac.c @@ -0,0 +1,130 @@ +#include "amd64_edac.h" + +static struct edac_pci_ctl_info *amd64_ctl_pci; + +static int report_gart_errors; +module_param(report_gart_errors, int, 0644); + +/* + * Set by command line parameter. If BIOS has enabled the ECC, this override is + * cleared to prevent re-enabling the hardware by this driver. + */ +static int ecc_enable_override; +module_param(ecc_enable_override, int, 0644); + +/* Lookup table for all possible MC control instances */ +struct amd64_pvt; +static struct mem_ctl_info *mci_lookup[MAX_NUMNODES]; +static struct amd64_pvt *pvt_lookup[MAX_NUMNODES]; + +/* + * Memory scrubber control interface. For K8, memory scrubbing is handled by + * hardware and can involve L2 cache, dcache as well as the main memory. With + * F10, this is extended to L3 cache scrubbing on CPU models sporting that + * functionality. + * + * This causes the "units" for the scrubbing speed to vary from 64 byte blocks + * (dram) over to cache lines. This is nasty, so we will use bandwidth in + * bytes/sec for the setting. + * + * Currently, we only do dram scrubbing. If the scrubbing is done in software on + * other archs, we might not have access to the caches directly. + */ + +/* + * scan the scrub rate mapping table for a close or matching bandwidth value to + * issue. If requested is too big, then use last maximum value found. + */ +static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, + u32 min_scrubrate) +{ + u32 scrubval; + int i; + + /* + * map the configured rate (new_bw) to a value specific to the AMD64 + * memory controller and apply to register. Search for the first + * bandwidth entry that is greater or equal than the setting requested + * and program that. If at last entry, turn off DRAM scrubbing. + */ + for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { + /* + * skip scrub rates which aren't recommended + * (see F10 BKDG, F3x58) + */ + if (scrubrates[i].scrubval < min_scrubrate) + continue; + + if (scrubrates[i].bandwidth <= new_bw) + break; + + /* + * if no suitable bandwidth found, turn off DRAM scrubbing + * entirely by falling back to the last element in the + * scrubrates array. + */ + } + + scrubval = scrubrates[i].scrubval; + if (scrubval) + edac_printk(KERN_DEBUG, EDAC_MC, + "Setting scrub rate bandwidth: %u\n", + scrubrates[i].bandwidth); + else + edac_printk(KERN_DEBUG, EDAC_MC, "Turning scrubbing off.\n"); + + pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F); + + return 0; +} + +static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 min_scrubrate = 0x0; + + switch (boot_cpu_data.x86) { + case 0xf: + min_scrubrate = K8_MIN_SCRUB_RATE_BITS; + break; + case 0x10: + min_scrubrate = F10_MIN_SCRUB_RATE_BITS; + break; + case 0x11: + min_scrubrate = F11_MIN_SCRUB_RATE_BITS; + break; + + default: + amd64_printk(KERN_ERR, "Unsupported family!\n"); + break; + } + return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth, + min_scrubrate); +} + +static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 scrubval = 0; + int status = -1, i, ret = 0; + + ret = pci_read_config_dword(pvt->misc_f3_ctl, K8_SCRCTRL, &scrubval); + if (ret) + debugf0("Reading K8_SCRCTRL failed\n"); + + scrubval = scrubval & 0x001F; + + edac_printk(KERN_DEBUG, EDAC_MC, + "pci-read, sdram scrub control value: %d \n", scrubval); + + for (i = 0; ARRAY_SIZE(scrubrates); i++) { + if (scrubrates[i].scrubval == scrubval) { + *bw = scrubrates[i].bandwidth; + status = 0; + break; + } + } + + return status; +} + -- cgit v1.2.3-18-g5258 From 6775763a2377e1ea865299b6daadc875d622de3f Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 15:53:22 +0200 Subject: amd64_edac: add sys addr to memory controller mapping helpers Borislav: - cleanup comments - cleanup debug calls - simplify find_mc_by_sys_addr's exit path Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 141 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 6876d435979..a774f34d508 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -128,3 +128,144 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) return status; } +/* Map from a CSROW entry to the mask entry that operates on it */ +static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow) +{ + return csrow >> (pvt->num_dcsm >> 3); +} + +/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */ +static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow) +{ + if (dct == 0) + return pvt->dcsb0[csrow]; + else + return pvt->dcsb1[csrow]; +} + +/* + * Return the 'mask' address the i'th CS entry. This function is needed because + * there number of DCSM registers on Rev E and prior vs Rev F and later is + * different. + */ +static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow) +{ + if (dct == 0) + return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)]; + else + return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)]; +} + + +/* + * In *base and *limit, pass back the full 40-bit base and limit physical + * addresses for the node given by node_id. This information is obtained from + * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The + * base and limit addresses are of type SysAddr, as defined at the start of + * section 3.4.4 (p. 70). They are the lowest and highest physical addresses + * in the address range they represent. + */ +static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id, + u64 *base, u64 *limit) +{ + *base = pvt->dram_base[node_id]; + *limit = pvt->dram_limit[node_id]; +} + +/* + * Return 1 if the SysAddr given by sys_addr matches the base/limit associated + * with node_id + */ +static int amd64_base_limit_match(struct amd64_pvt *pvt, + u64 sys_addr, int node_id) +{ + u64 base, limit, addr; + + amd64_get_base_and_limit(pvt, node_id, &base, &limit); + + /* The K8 treats this as a 40-bit value. However, bits 63-40 will be + * all ones if the most significant implemented address bit is 1. + * Here we discard bits 63-40. See section 3.4.2 of AMD publication + * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1 + * Application Programming. + */ + addr = sys_addr & 0x000000ffffffffffull; + + return (addr >= base) && (addr <= limit); +} + +/* + * Attempt to map a SysAddr to a node. On success, return a pointer to the + * mem_ctl_info structure for the node that the SysAddr maps to. + * + * On failure, return NULL. + */ +static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, + u64 sys_addr) +{ + struct amd64_pvt *pvt; + int node_id; + u32 intlv_en, bits; + + /* + * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section + * 3.4.4.2) registers to map the SysAddr to a node ID. + */ + pvt = mci->pvt_info; + + /* + * The value of this field should be the same for all DRAM Base + * registers. Therefore we arbitrarily choose to read it from the + * register for node 0. + */ + intlv_en = pvt->dram_IntlvEn[0]; + + if (intlv_en == 0) { + for (node_id = 0; ; ) { + if (amd64_base_limit_match(pvt, sys_addr, node_id)) + break; + + if (++node_id >= DRAM_REG_COUNT) + goto err_no_match; + } + goto found; + } + + if (unlikely((intlv_en != (0x01 << 8)) && + (intlv_en != (0x03 << 8)) && + (intlv_en != (0x07 << 8)))) { + amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from " + "IntlvEn field of DRAM Base Register for node 0: " + "This probably indicates a BIOS bug.\n", intlv_en); + return NULL; + } + + bits = (((u32) sys_addr) >> 12) & intlv_en; + + for (node_id = 0; ; ) { + if ((pvt->dram_limit[node_id] & intlv_en) == bits) + break; /* intlv_sel field matches */ + + if (++node_id >= DRAM_REG_COUNT) + goto err_no_match; + } + + /* sanity test for sys_addr */ + if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) { + amd64_printk(KERN_WARNING, + "%s(): sys_addr 0x%lx falls outside base/limit " + "address range for node %d with node interleaving " + "enabled.\n", __func__, (unsigned long)sys_addr, + node_id); + return NULL; + } + +found: + return edac_mc_find(node_id); + +err_no_match: + debugf2("sys_addr 0x%lx doesn't match any node\n", + (unsigned long)sys_addr); + + return NULL; +} -- cgit v1.2.3-18-g5258 From e2ce7255e84db656853e91536e6023f92ff89f97 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 15:57:12 +0200 Subject: amd64_edac: add functionality to compute the DRAM hole Borislav: - cleanup/fix comments, add BKDG refs - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 166 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index a774f34d508..4716fb561e6 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -269,3 +269,169 @@ err_no_match: return NULL; } + +/* + * Extract the DRAM CS base address from selected csrow register. + */ +static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow) +{ + return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) << + pvt->dcs_shift; +} + +/* + * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way. + */ +static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow) +{ + u64 dcsm_bits, other_bits; + u64 mask; + + /* Extract bits from DRAM CS Mask. */ + dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask; + + other_bits = pvt->dcsm_mask; + other_bits = ~(other_bits << pvt->dcs_shift); + + /* + * The extracted bits from DCSM belong in the spaces represented by + * the cleared bits in other_bits. + */ + mask = (dcsm_bits << pvt->dcs_shift) | other_bits; + + return mask; +} + +/* + * @input_addr is an InputAddr associated with the node given by mci. Return the + * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr). + */ +static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) +{ + struct amd64_pvt *pvt; + int csrow; + u64 base, mask; + + pvt = mci->pvt_info; + + /* + * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS + * base/mask register pair, test the condition shown near the start of + * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E). + */ + for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) { + + /* This DRAM chip select is disabled on this node */ + if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0) + continue; + + base = base_from_dct_base(pvt, csrow); + mask = ~mask_from_dct_mask(pvt, csrow); + + if ((input_addr & mask) == (base & mask)) { + debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n", + (unsigned long)input_addr, csrow, + pvt->mc_node_id); + + return csrow; + } + } + + debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n", + (unsigned long)input_addr, pvt->mc_node_id); + + return -1; +} + +/* + * Return the base value defined by the DRAM Base register for the node + * represented by mci. This function returns the full 40-bit value despite the + * fact that the register only stores bits 39-24 of the value. See section + * 3.4.4.1 (BKDG #26094, K8, revA-E) + */ +static inline u64 get_dram_base(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return pvt->dram_base[pvt->mc_node_id]; +} + +/* + * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094) + * for the node represented by mci. Info is passed back in *hole_base, + * *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if + * info is invalid. Info may be invalid for either of the following reasons: + * + * - The revision of the node is not E or greater. In this case, the DRAM Hole + * Address Register does not exist. + * + * - The DramHoleValid bit is cleared in the DRAM Hole Address Register, + * indicating that its contents are not valid. + * + * The values passed back in *hole_base, *hole_offset, and *hole_size are + * complete 32-bit values despite the fact that the bitfields in the DHAR + * only represent bits 31-24 of the base and offset values. + */ +int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, + u64 *hole_offset, u64 *hole_size) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u64 base; + + /* only revE and later have the DRAM Hole Address Register */ + if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) { + debugf1(" revision %d for node %d does not support DHAR\n", + pvt->ext_model, pvt->mc_node_id); + return 1; + } + + /* only valid for Fam10h */ + if (boot_cpu_data.x86 == 0x10 && + (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) { + debugf1(" Dram Memory Hoisting is DISABLED on this system\n"); + return 1; + } + + if ((pvt->dhar & DHAR_VALID) == 0) { + debugf1(" Dram Memory Hoisting is DISABLED on this node %d\n", + pvt->mc_node_id); + return 1; + } + + /* This node has Memory Hoisting */ + + /* +------------------+--------------------+--------------------+----- + * | memory | DRAM hole | relocated | + * | [0, (x - 1)] | [x, 0xffffffff] | addresses from | + * | | | DRAM hole | + * | | | [0x100000000, | + * | | | (0x100000000+ | + * | | | (0xffffffff-x))] | + * +------------------+--------------------+--------------------+----- + * + * Above is a diagram of physical memory showing the DRAM hole and the + * relocated addresses from the DRAM hole. As shown, the DRAM hole + * starts at address x (the base address) and extends through address + * 0xffffffff. The DRAM Hole Address Register (DHAR) relocates the + * addresses in the hole so that they start at 0x100000000. + */ + + base = dhar_base(pvt->dhar); + + *hole_base = base; + *hole_size = (0x1ull << 32) - base; + + if (boot_cpu_data.x86 > 0xf) + *hole_offset = f10_dhar_offset(pvt->dhar); + else + *hole_offset = k8_dhar_offset(pvt->dhar); + + debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n", + pvt->mc_node_id, (unsigned long)*hole_base, + (unsigned long)*hole_offset, (unsigned long)*hole_size); + + return 0; +} +EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info); + + -- cgit v1.2.3-18-g5258 From 93c2df58b5b1a434cca8f60067e0e12d1942b7f1 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 4 May 2009 20:46:50 +0200 Subject: amd64_edac: add DRAM address type conversion facilities Borislav: - cleanup/fix comments, add BKDG refs - fix function return value patterns - cleanup dbg calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 294 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 294 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 4716fb561e6..28f85c9e3af 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -434,4 +434,298 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, } EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info); +/* + * Return the DramAddr that the SysAddr given by @sys_addr maps to. It is + * assumed that sys_addr maps to the node given by mci. + * + * The first part of section 3.4.4 (p. 70) shows how the DRAM Base (section + * 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers are used to translate a + * SysAddr to a DramAddr. If the DRAM Hole Address Register (DHAR) is enabled, + * then it is also involved in translating a SysAddr to a DramAddr. Sections + * 3.4.8 and 3.5.8.2 describe the DHAR and how it is used for memory hoisting. + * These parts of the documentation are unclear. I interpret them as follows: + * + * When node n receives a SysAddr, it processes the SysAddr as follows: + * + * 1. It extracts the DRAMBase and DRAMLimit values from the DRAM Base and DRAM + * Limit registers for node n. If the SysAddr is not within the range + * specified by the base and limit values, then node n ignores the Sysaddr + * (since it does not map to node n). Otherwise continue to step 2 below. + * + * 2. If the DramHoleValid bit of the DHAR for node n is clear, the DHAR is + * disabled so skip to step 3 below. Otherwise see if the SysAddr is within + * the range of relocated addresses (starting at 0x100000000) from the DRAM + * hole. If not, skip to step 3 below. Else get the value of the + * DramHoleOffset field from the DHAR. To obtain the DramAddr, subtract the + * offset defined by this value from the SysAddr. + * + * 3. Obtain the base address for node n from the DRAMBase field of the DRAM + * Base register for node n. To obtain the DramAddr, subtract the base + * address from the SysAddr, as shown near the start of section 3.4.4 (p.70). + */ +static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) +{ + u64 dram_base, hole_base, hole_offset, hole_size, dram_addr; + int ret = 0; + + dram_base = get_dram_base(mci); + + ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, + &hole_size); + if (!ret) { + if ((sys_addr >= (1ull << 32)) && + (sys_addr < ((1ull << 32) + hole_size))) { + /* use DHAR to translate SysAddr to DramAddr */ + dram_addr = sys_addr - hole_offset; + + debugf2("using DHAR to translate SysAddr 0x%lx to " + "DramAddr 0x%lx\n", + (unsigned long)sys_addr, + (unsigned long)dram_addr); + + return dram_addr; + } + } + + /* + * Translate the SysAddr to a DramAddr as shown near the start of + * section 3.4.4 (p. 70). Although sys_addr is a 64-bit value, the k8 + * only deals with 40-bit values. Therefore we discard bits 63-40 of + * sys_addr below. If bit 39 of sys_addr is 1 then the bits we + * discard are all 1s. Otherwise the bits we discard are all 0s. See + * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture + * Programmer's Manual Volume 1 Application Programming. + */ + dram_addr = (sys_addr & 0xffffffffffull) - dram_base; + + debugf2("using DRAM Base register to translate SysAddr 0x%lx to " + "DramAddr 0x%lx\n", (unsigned long)sys_addr, + (unsigned long)dram_addr); + return dram_addr; +} + +/* + * @intlv_en is the value of the IntlvEn field from a DRAM Base register + * (section 3.4.4.1). Return the number of bits from a SysAddr that are used + * for node interleaving. + */ +static int num_node_interleave_bits(unsigned intlv_en) +{ + static const int intlv_shift_table[] = { 0, 1, 0, 2, 0, 0, 0, 3 }; + int n; + + BUG_ON(intlv_en > 7); + n = intlv_shift_table[intlv_en]; + return n; +} + +/* Translate the DramAddr given by @dram_addr to an InputAddr. */ +static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr) +{ + struct amd64_pvt *pvt; + int intlv_shift; + u64 input_addr; + + pvt = mci->pvt_info; + + /* + * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) + * concerning translating a DramAddr to an InputAddr. + */ + intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); + input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) + + (dram_addr & 0xfff); + + debugf2(" Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n", + intlv_shift, (unsigned long)dram_addr, + (unsigned long)input_addr); + + return input_addr; +} + +/* + * Translate the SysAddr represented by @sys_addr to an InputAddr. It is + * assumed that @sys_addr maps to the node given by mci. + */ +static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr) +{ + u64 input_addr; + + input_addr = + dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr)); + + debugf2("SysAdddr 0x%lx translates to InputAddr 0x%lx\n", + (unsigned long)sys_addr, (unsigned long)input_addr); + + return input_addr; +} + + +/* + * @input_addr is an InputAddr associated with the node represented by mci. + * Translate @input_addr to a DramAddr and return the result. + */ +static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr) +{ + struct amd64_pvt *pvt; + int node_id, intlv_shift; + u64 bits, dram_addr; + u32 intlv_sel; + + /* + * Near the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) + * shows how to translate a DramAddr to an InputAddr. Here we reverse + * this procedure. When translating from a DramAddr to an InputAddr, the + * bits used for node interleaving are discarded. Here we recover these + * bits from the IntlvSel field of the DRAM Limit register (section + * 3.4.4.2) for the node that input_addr is associated with. + */ + pvt = mci->pvt_info; + node_id = pvt->mc_node_id; + BUG_ON((node_id < 0) || (node_id > 7)); + + intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]); + + if (intlv_shift == 0) { + debugf1(" InputAddr 0x%lx translates to DramAddr of " + "same value\n", (unsigned long)input_addr); + + return input_addr; + } + + bits = ((input_addr & 0xffffff000ull) << intlv_shift) + + (input_addr & 0xfff); + + intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1); + dram_addr = bits + (intlv_sel << 12); + + debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx " + "(%d node interleave bits)\n", (unsigned long)input_addr, + (unsigned long)dram_addr, intlv_shift); + + return dram_addr; +} + +/* + * @dram_addr is a DramAddr that maps to the node represented by mci. Convert + * @dram_addr to a SysAddr. + */ +static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u64 hole_base, hole_offset, hole_size, base, limit, sys_addr; + int ret = 0; + + ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, + &hole_size); + if (!ret) { + if ((dram_addr >= hole_base) && + (dram_addr < (hole_base + hole_size))) { + sys_addr = dram_addr + hole_offset; + + debugf1("using DHAR to translate DramAddr 0x%lx to " + "SysAddr 0x%lx\n", (unsigned long)dram_addr, + (unsigned long)sys_addr); + + return sys_addr; + } + } + + amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit); + sys_addr = dram_addr + base; + + /* + * The sys_addr we have computed up to this point is a 40-bit value + * because the k8 deals with 40-bit values. However, the value we are + * supposed to return is a full 64-bit physical address. The AMD + * x86-64 architecture specifies that the most significant implemented + * address bit through bit 63 of a physical address must be either all + * 0s or all 1s. Therefore we sign-extend the 40-bit sys_addr to a + * 64-bit value below. See section 3.4.2 of AMD publication 24592: + * AMD x86-64 Architecture Programmer's Manual Volume 1 Application + * Programming. + */ + sys_addr |= ~((sys_addr & (1ull << 39)) - 1); + + debugf1(" Node %d, DramAddr 0x%lx to SysAddr 0x%lx\n", + pvt->mc_node_id, (unsigned long)dram_addr, + (unsigned long)sys_addr); + + return sys_addr; +} + +/* + * @input_addr is an InputAddr associated with the node given by mci. Translate + * @input_addr to a SysAddr. + */ +static inline u64 input_addr_to_sys_addr(struct mem_ctl_info *mci, + u64 input_addr) +{ + return dram_addr_to_sys_addr(mci, + input_addr_to_dram_addr(mci, input_addr)); +} + +/* + * Find the minimum and maximum InputAddr values that map to the given @csrow. + * Pass back these values in *input_addr_min and *input_addr_max. + */ +static void find_csrow_limits(struct mem_ctl_info *mci, int csrow, + u64 *input_addr_min, u64 *input_addr_max) +{ + struct amd64_pvt *pvt; + u64 base, mask; + + pvt = mci->pvt_info; + BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT)); + + base = base_from_dct_base(pvt, csrow); + mask = mask_from_dct_mask(pvt, csrow); + + *input_addr_min = base & ~mask; + *input_addr_max = base | mask | pvt->dcs_mask_notused; +} + +/* + * Extract error address from MCA NB Address Low (section 3.6.4.5) and MCA NB + * Address High (section 3.6.4.6) register values and return the result. Address + * is located in the info structure (nbeah and nbeal), the encoding is device + * specific. + */ +static u64 extract_error_address(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + return pvt->ops->get_error_address(mci, info); +} + + +/* Map the Error address to a PAGE and PAGE OFFSET. */ +static inline void error_address_to_page_and_offset(u64 error_address, + u32 *page, u32 *offset) +{ + *page = (u32) (error_address >> PAGE_SHIFT); + *offset = ((u32) error_address) & ~PAGE_MASK; +} + +/* + * @sys_addr is an error address (a SysAddr) extracted from the MCA NB Address + * Low (section 3.6.4.5) and MCA NB Address High (section 3.6.4.6) registers + * of a node that detected an ECC memory error. mci represents the node that + * the error address maps to (possibly different from the node that detected + * the error). Return the number of the csrow that sys_addr maps to, or -1 on + * error. + */ +static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) +{ + int csrow; + + csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr)); + + if (csrow == -1) + amd64_mc_printk(mci, KERN_ERR, + "Failed to translate InputAddr to csrow for " + "address 0x%lx\n", (unsigned long)sys_addr); + return csrow; +} -- cgit v1.2.3-18-g5258 From 2da11654ea4d32c5700693675dfbd55c70619519 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:09:09 +0200 Subject: amd64_edac: add helper to dump relevant registers Borislav: - cleanup/fix comments - fix function return value patterns - cleanup dbg calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 28f85c9e3af..3d6d0007ed5 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -729,3 +729,145 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) return csrow; } +static int get_channel_from_ecc_syndrome(unsigned short syndrome); + +static void amd64_cpu_display_info(struct amd64_pvt *pvt) +{ + if (boot_cpu_data.x86 == 0x11) + edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n"); + else if (boot_cpu_data.x86 == 0x10) + edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n"); + else if (boot_cpu_data.x86 == 0xf) + edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n", + (pvt->ext_model >= OPTERON_CPU_REV_F) ? + "Rev F or later" : "Rev E or earlier"); + else + /* we'll hardly ever ever get here */ + edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n"); +} + +/* + * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs + * are ECC capable. + */ +static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt) +{ + int bit; + enum dev_type edac_cap = EDAC_NONE; + + bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F) + ? 19 + : 17; + + if (pvt->dclr0 >> BIT(bit)) + edac_cap = EDAC_FLAG_SECDED; + + return edac_cap; +} + + +static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt, + int ganged); + +/* Display and decode various NB registers for debug purposes. */ +static void amd64_dump_misc_regs(struct amd64_pvt *pvt) +{ + int ganged; + + debugf1(" nbcap:0x%8.08x DctDualCap=%s DualNode=%s 8-Node=%s\n", + pvt->nbcap, + (pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "True" : "False", + (pvt->nbcap & K8_NBCAP_DUAL_NODE) ? "True" : "False", + (pvt->nbcap & K8_NBCAP_8_NODE) ? "True" : "False"); + debugf1(" ECC Capable=%s ChipKill Capable=%s\n", + (pvt->nbcap & K8_NBCAP_SECDED) ? "True" : "False", + (pvt->nbcap & K8_NBCAP_CHIPKILL) ? "True" : "False"); + debugf1(" DramCfg0-low=0x%08x DIMM-ECC=%s Parity=%s Width=%s\n", + pvt->dclr0, + (pvt->dclr0 & BIT(19)) ? "Enabled" : "Disabled", + (pvt->dclr0 & BIT(8)) ? "Enabled" : "Disabled", + (pvt->dclr0 & BIT(11)) ? "128b" : "64b"); + debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s DIMM Type=%s\n", + (pvt->dclr0 & BIT(12)) ? "Y" : "N", + (pvt->dclr0 & BIT(13)) ? "Y" : "N", + (pvt->dclr0 & BIT(14)) ? "Y" : "N", + (pvt->dclr0 & BIT(15)) ? "Y" : "N", + (pvt->dclr0 & BIT(16)) ? "UN-Buffered" : "Buffered"); + + + debugf1(" online-spare: 0x%8.08x\n", pvt->online_spare); + + if (boot_cpu_data.x86 == 0xf) { + debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n", + pvt->dhar, dhar_base(pvt->dhar), + k8_dhar_offset(pvt->dhar)); + debugf1(" DramHoleValid=%s\n", + (pvt->dhar & DHAR_VALID) ? "True" : "False"); + + debugf1(" dbam-dkt: 0x%8.08x\n", pvt->dbam0); + + /* everything below this point is Fam10h and above */ + return; + + } else { + debugf1(" dhar: 0x%8.08x Base=0x%08x Offset=0x%08x\n", + pvt->dhar, dhar_base(pvt->dhar), + f10_dhar_offset(pvt->dhar)); + debugf1(" DramMemHoistValid=%s DramHoleValid=%s\n", + (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) ? + "True" : "False", + (pvt->dhar & DHAR_VALID) ? + "True" : "False"); + } + + /* Only if NOT ganged does dcl1 have valid info */ + if (!dct_ganging_enabled(pvt)) { + debugf1(" DramCfg1-low=0x%08x DIMM-ECC=%s Parity=%s " + "Width=%s\n", pvt->dclr1, + (pvt->dclr1 & BIT(19)) ? "Enabled" : "Disabled", + (pvt->dclr1 & BIT(8)) ? "Enabled" : "Disabled", + (pvt->dclr1 & BIT(11)) ? "128b" : "64b"); + debugf1(" DIMM x4 Present: L0=%s L1=%s L2=%s L3=%s " + "DIMM Type=%s\n", + (pvt->dclr1 & BIT(12)) ? "Y" : "N", + (pvt->dclr1 & BIT(13)) ? "Y" : "N", + (pvt->dclr1 & BIT(14)) ? "Y" : "N", + (pvt->dclr1 & BIT(15)) ? "Y" : "N", + (pvt->dclr1 & BIT(16)) ? "UN-Buffered" : "Buffered"); + } + + /* + * Determine if ganged and then dump memory sizes for first controller, + * and if NOT ganged dump info for 2nd controller. + */ + ganged = dct_ganging_enabled(pvt); + + f10_debug_display_dimm_sizes(0, pvt, ganged); + + if (!ganged) + f10_debug_display_dimm_sizes(1, pvt, ganged); +} + +/* Read in both of DBAM registers */ +static void amd64_read_dbam_reg(struct amd64_pvt *pvt) +{ + int err = 0; + unsigned int reg; + + reg = DBAM0; + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam0); + if (err) + goto err_reg; + + if (boot_cpu_data.x86 >= 0x10) { + reg = DBAM1; + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, &pvt->dbam1); + + if (err) + goto err_reg; + } + +err_reg: + debugf0("Error reading F2x%03x.\n", reg); +} + -- cgit v1.2.3-18-g5258 From 94be4bff21990674ac418c970c708a1a01cf709f Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:12:00 +0200 Subject: amd64_edac: assign DRAM chip select base and mask in a family-specific way Borislav: - cleanup/fix comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3d6d0007ed5..5ec44a440d6 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -871,3 +871,145 @@ err_reg: debugf0("Error reading F2x%03x.\n", reg); } +/* + * NOTE: CPU Revision Dependent code: Rev E and Rev F + * + * Set the DCSB and DCSM mask values depending on the CPU revision value. Also + * set the shift factor for the DCSB and DCSM values. + * + * ->dcs_mask_notused, RevE: + * + * To find the max InputAddr for the csrow, start with the base address and set + * all bits that are "don't care" bits in the test at the start of section + * 3.5.4 (p. 84). + * + * The "don't care" bits are all set bits in the mask and all bits in the gaps + * between bit ranges [35:25] and [19:13]. The value REV_E_DCS_NOTUSED_BITS + * represents bits [24:20] and [12:0], which are all bits in the above-mentioned + * gaps. + * + * ->dcs_mask_notused, RevF and later: + * + * To find the max InputAddr for the csrow, start with the base address and set + * all bits that are "don't care" bits in the test at the start of NPT section + * 4.5.4 (p. 87). + * + * The "don't care" bits are all set bits in the mask and all bits in the gaps + * between bit ranges [36:27] and [21:13]. + * + * The value REV_F_F1Xh_DCS_NOTUSED_BITS represents bits [26:22] and [12:0], + * which are all bits in the above-mentioned gaps. + */ +static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt) +{ + if (pvt->ext_model >= OPTERON_CPU_REV_F) { + pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS; + pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS; + pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS; + pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT; + + switch (boot_cpu_data.x86) { + case 0xf: + pvt->num_dcsm = REV_F_DCSM_COUNT; + break; + + case 0x10: + pvt->num_dcsm = F10_DCSM_COUNT; + break; + + case 0x11: + pvt->num_dcsm = F11_DCSM_COUNT; + break; + + default: + amd64_printk(KERN_ERR, "Unsupported family!\n"); + break; + } + } else { + pvt->dcsb_base = REV_E_DCSB_BASE_BITS; + pvt->dcsm_mask = REV_E_DCSM_MASK_BITS; + pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS; + pvt->dcs_shift = REV_E_DCS_SHIFT; + pvt->num_dcsm = REV_E_DCSM_COUNT; + } +} + +/* + * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask hw registers + */ +static void amd64_read_dct_base_mask(struct amd64_pvt *pvt) +{ + int cs, reg, err = 0; + + amd64_set_dct_base_and_mask(pvt); + + for (cs = 0; cs < CHIPSELECT_COUNT; cs++) { + reg = K8_DCSB0 + (cs * 4); + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, + &pvt->dcsb0[cs]); + if (unlikely(err)) + debugf0("Reading K8_DCSB0[%d] failed\n", cs); + else + debugf0(" DCSB0[%d]=0x%08x reg: F2x%x\n", + cs, pvt->dcsb0[cs], reg); + + /* If DCT are NOT ganged, then read in DCT1's base */ + if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { + reg = F10_DCSB1 + (cs * 4); + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, + &pvt->dcsb1[cs]); + if (unlikely(err)) + debugf0("Reading F10_DCSB1[%d] failed\n", cs); + else + debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n", + cs, pvt->dcsb1[cs], reg); + } else { + pvt->dcsb1[cs] = 0; + } + } + + for (cs = 0; cs < pvt->num_dcsm; cs++) { + reg = K8_DCSB0 + (cs * 4); + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, + &pvt->dcsm0[cs]); + if (unlikely(err)) + debugf0("Reading K8_DCSM0 failed\n"); + else + debugf0(" DCSM0[%d]=0x%08x reg: F2x%x\n", + cs, pvt->dcsm0[cs], reg); + + /* If DCT are NOT ganged, then read in DCT1's mask */ + if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) { + reg = F10_DCSM1 + (cs * 4); + err = pci_read_config_dword(pvt->dram_f2_ctl, reg, + &pvt->dcsm1[cs]); + if (unlikely(err)) + debugf0("Reading F10_DCSM1[%d] failed\n", cs); + else + debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n", + cs, pvt->dcsm1[cs], reg); + } else + pvt->dcsm1[cs] = 0; + } +} + +static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt) +{ + enum mem_type type; + + if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= OPTERON_CPU_REV_F) { + /* Rev F and later */ + type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2; + } else { + /* Rev E and earlier */ + type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR; + } + + debugf1(" Memory type is: %s\n", + (type == MEM_DDR2) ? "MEM_DDR2" : + (type == MEM_RDDR2) ? "MEM_RDDR2" : + (type == MEM_DDR) ? "MEM_DDR" : "MEM_RDDR"); + + return type; +} + -- cgit v1.2.3-18-g5258 From ddff876d2022c5e06509f6535bc4fd61c4d6ffd6 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:14:52 +0200 Subject: amd64_edac: add k8-specific methods Borislav: - fix/cleanup/move comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 173 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 5ec44a440d6..24c031f7975 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1013,3 +1013,176 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt) return type; } +/* + * Read the DRAM Configuration Low register. It differs between CG, D & E revs + * and the later RevF memory controllers (DDR vs DDR2) + * + * Return: + * number of memory channels in operation + * Pass back: + * contents of the DCL0_LOW register + */ +static int k8_early_channel_count(struct amd64_pvt *pvt) +{ + int flag, err = 0; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); + if (err) + return err; + + if ((boot_cpu_data.x86_model >> 4) >= OPTERON_CPU_REV_F) { + /* RevF (NPT) and later */ + flag = pvt->dclr0 & F10_WIDTH_128; + } else { + /* RevE and earlier */ + flag = pvt->dclr0 & REVE_WIDTH_128; + } + + /* not used */ + pvt->dclr1 = 0; + + return (flag) ? 2 : 1; +} + +/* extract the ERROR ADDRESS for the K8 CPUs */ +static u64 k8_get_error_address(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + return (((u64) (info->nbeah & 0xff)) << 32) + + (info->nbeal & ~0x03); +} + +/* + * Read the Base and Limit registers for K8 based Memory controllers; extract + * fields from the 'raw' reg into separate data fields + * + * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN + */ +static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +{ + u32 low; + u32 off = dram << 3; /* 8 bytes between DRAM entries */ + int err; + + err = pci_read_config_dword(pvt->addr_f1_ctl, + K8_DRAM_BASE_LOW + off, &low); + if (err) + debugf0("Reading K8_DRAM_BASE_LOW failed\n"); + + /* Extract parts into separate data entries */ + pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8; + pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7; + pvt->dram_rw_en[dram] = (low & 0x3); + + err = pci_read_config_dword(pvt->addr_f1_ctl, + K8_DRAM_LIMIT_LOW + off, &low); + if (err) + debugf0("Reading K8_DRAM_LIMIT_LOW failed\n"); + + /* + * Extract parts into separate data entries. Limit is the HIGHEST memory + * location of the region, so lower 24 bits need to be all ones + */ + pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF; + pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7; + pvt->dram_DstNode[dram] = (low & 0x7); +} + +static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + u64 SystemAddress) +{ + struct mem_ctl_info *src_mci; + unsigned short syndrome; + int channel, csrow; + u32 page, offset; + + /* Extract the syndrome parts and form a 16-bit syndrome */ + syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8; + syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh); + + /* CHIPKILL enabled */ + if (info->nbcfg & K8_NBCFG_CHIPKILL) { + channel = get_channel_from_ecc_syndrome(syndrome); + if (channel < 0) { + /* + * Syndrome didn't map, so we don't know which of the + * 2 DIMMs is in error. So we need to ID 'both' of them + * as suspect. + */ + amd64_mc_printk(mci, KERN_WARNING, + "unknown syndrome 0x%x - possible error " + "reporting race\n", syndrome); + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); + return; + } + } else { + /* + * non-chipkill ecc mode + * + * The k8 documentation is unclear about how to determine the + * channel number when using non-chipkill memory. This method + * was obtained from email communication with someone at AMD. + * (Wish the email was placed in this comment - norsk) + */ + channel = ((SystemAddress & BIT(3)) != 0); + } + + /* + * Find out which node the error address belongs to. This may be + * different from the node that detected the error. + */ + src_mci = find_mc_by_sys_addr(mci, SystemAddress); + if (src_mci) { + amd64_mc_printk(mci, KERN_ERR, + "failed to map error address 0x%lx to a node\n", + (unsigned long)SystemAddress); + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); + return; + } + + /* Now map the SystemAddress to a CSROW */ + csrow = sys_addr_to_csrow(src_mci, SystemAddress); + if (csrow < 0) { + edac_mc_handle_ce_no_info(src_mci, EDAC_MOD_STR); + } else { + error_address_to_page_and_offset(SystemAddress, &page, &offset); + + edac_mc_handle_ce(src_mci, page, offset, syndrome, csrow, + channel, EDAC_MOD_STR); + } +} + +/* + * determrine the number of PAGES in for this DIMM's size based on its DRAM + * Address Mapping. + * + * First step is to calc the number of bits to shift a value of 1 left to + * indicate show many pages. Start with the DBAM value as the starting bits, + * then proceed to adjust those shift bits, based on CPU rev and the table. + * See BKDG on the DBAM + */ +static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) +{ + int nr_pages; + + if (pvt->ext_model >= OPTERON_CPU_REV_F) { + nr_pages = 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT); + } else { + /* + * RevE and less section; this line is tricky. It collapses the + * table used by RevD and later to one that matches revisions CG + * and earlier. + */ + dram_map -= (pvt->ext_model >= OPTERON_CPU_REV_D) ? + (dram_map > 8 ? 4 : (dram_map > 5 ? + 3 : (dram_map > 2 ? 1 : 0))) : 0; + + /* 25 shift is 32MiB minimum DIMM size in RevE and prior */ + nr_pages = 1 << (dram_map + 25 - PAGE_SHIFT); + } + + return nr_pages; +} + + -- cgit v1.2.3-18-g5258 From 1afd3c98b5e8df68e1840b56c0ced15f314ce30d Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:16:50 +0200 Subject: amd64_edac: add F10h-and-later methods-p1 Borislav: Fail f10_early_channel_count() if error encountered while reading a NB register since those cached register contents are accessed afterwards. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 24c031f7975..b4ef2c70500 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1185,4 +1185,185 @@ static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) return nr_pages; } +/* + * Get the number of DCT channels in use. + * + * Return: + * number of Memory Channels in operation + * Pass back: + * contents of the DCL0_LOW register + */ +static int f10_early_channel_count(struct amd64_pvt *pvt) +{ + int err = 0, channels = 0; + u32 dbam; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1); + if (err) + goto err_reg; + + /* If we are in 128 bit mode, then we are using 2 channels */ + if (pvt->dclr0 & F10_WIDTH_128) { + debugf0("Data WIDTH is 128 bits - 2 channels\n"); + channels = 2; + return channels; + } + + /* + * Need to check if in UN-ganged mode: In such, there are 2 channels, + * but they are NOT in 128 bit mode and thus the above 'dcl0' status bit + * will be OFF. + * + * Need to check DCT0[0] and DCT1[0] to see if only one of them has + * their CSEnable bit on. If so, then SINGLE DIMM case. + */ + debugf0("Data WIDTH is NOT 128 bits - need more decoding\n"); + /* + * Check DRAM Bank Address Mapping values for each DIMM to see if there + * is more than just one DIMM present in unganged mode. Need to check + * both controllers since DIMMs can be placed in either one. + */ + channels = 0; + err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM0, &dbam); + if (err) + goto err_reg; + + if (DBAM_DIMM(0, dbam) > 0) + channels++; + if (DBAM_DIMM(1, dbam) > 0) + channels++; + if (DBAM_DIMM(2, dbam) > 0) + channels++; + if (DBAM_DIMM(3, dbam) > 0) + channels++; + + /* If more than 2 DIMMs are present, then we have 2 channels */ + if (channels > 2) + channels = 2; + else if (channels == 0) { + /* No DIMMs on DCT0, so look at DCT1 */ + err = pci_read_config_dword(pvt->dram_f2_ctl, DBAM1, &dbam); + if (err) + goto err_reg; + + if (DBAM_DIMM(0, dbam) > 0) + channels++; + if (DBAM_DIMM(1, dbam) > 0) + channels++; + if (DBAM_DIMM(2, dbam) > 0) + channels++; + if (DBAM_DIMM(3, dbam) > 0) + channels++; + + if (channels > 2) + channels = 2; + } + + /* If we found ALL 0 values, then assume just ONE DIMM-ONE Channel */ + if (channels == 0) + channels = 1; + + debugf0("DIMM count= %d\n", channels); + + return channels; + +err_reg: + return -1; + +} + +static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map) +{ + return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT); +} + +/* Enable extended configuration access via 0xCF8 feature */ +static void amd64_setup(struct amd64_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); + + pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG); + reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; + pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); +} + +/* Restore the extended configuration access via 0xCF8 feature */ +static void amd64_teardown(struct amd64_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, ®); + + reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG; + if (pvt->flags.cf8_extcfg) + reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG; + pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg); +} + +static u64 f10_get_error_address(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + return (((u64) (info->nbeah & 0xffff)) << 32) + + (info->nbeal & ~0x01); +} + +/* + * Read the Base and Limit registers for F10 based Memory controllers. Extract + * fields from the 'raw' reg into separate data fields. + * + * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN. + */ +static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) +{ + u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit; + + low_offset = K8_DRAM_BASE_LOW + (dram << 3); + high_offset = F10_DRAM_BASE_HIGH + (dram << 3); + + /* read the 'raw' DRAM BASE Address register */ + pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_base); + + /* Read from the ECS data register */ + pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_base); + + /* Extract parts into separate data entries */ + pvt->dram_rw_en[dram] = (low_base & 0x3); + + if (pvt->dram_rw_en[dram] == 0) + return; + + pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7; + + pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) | + ((u64) low_base & 0xFFFF0000))) << 8; + + low_offset = K8_DRAM_LIMIT_LOW + (dram << 3); + high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3); + + /* read the 'raw' LIMIT registers */ + pci_read_config_dword(pvt->addr_f1_ctl, low_offset, &low_limit); + + /* Read from the ECS data register for the HIGH portion */ + pci_read_config_dword(pvt->addr_f1_ctl, high_offset, &high_limit); + + debugf0(" HW Regs: BASE=0x%08x-%08x LIMIT= 0x%08x-%08x\n", + high_base, low_base, high_limit, low_limit); + + pvt->dram_DstNode[dram] = (low_limit & 0x7); + pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7; + + /* + * Extract address values and form a LIMIT address. Limit is the HIGHEST + * memory location of the region, so low 24 bits need to be all ones. + */ + low_limit |= 0x0000FFFF; + pvt->dram_limit[dram] = + ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF); +} -- cgit v1.2.3-18-g5258 From 6163b5d4fb45d20e3eb92d627943f26572726889 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:20:17 +0200 Subject: amd64_edac: add F10h-and-later methods-p2 Borislav: - fix a wrong negation in f10_determine_base_addr_offset() - fix a wrong mask in f10_determine_base_addr_offset() which should select DctSelBaseAddr[31:11] and not [31:16] as it was before - remove StinkyIdentifiers, trivially simplify code. - fix/cleanup comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 196 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index b4ef2c70500..744a49ac9f5 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1367,3 +1367,199 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram) pvt->dram_limit[dram] = ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF); } + +static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) +{ + int err = 0; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW, + &pvt->dram_ctl_select_low); + if (err) { + debugf0("Reading F10_DCTL_SEL_LOW failed\n"); + } else { + debugf0("DRAM_DCTL_SEL_LOW=0x%x DctSelBaseAddr=0x%x\n", + pvt->dram_ctl_select_low, dct_sel_baseaddr(pvt)); + + debugf0(" DRAM DCTs are=%s DRAM Is=%s DRAM-Ctl-" + "sel-hi-range=%s\n", + (dct_ganging_enabled(pvt) ? "GANGED" : "NOT GANGED"), + (dct_dram_enabled(pvt) ? "Enabled" : "Disabled"), + (dct_high_range_enabled(pvt) ? "Enabled" : "Disabled")); + + debugf0(" DctDatIntLv=%s MemCleared=%s DctSelIntLvAddr=0x%x\n", + (dct_data_intlv_enabled(pvt) ? "Enabled" : "Disabled"), + (dct_memory_cleared(pvt) ? "True " : "False "), + dct_sel_interleave_addr(pvt)); + } + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH, + &pvt->dram_ctl_select_high); + if (err) + debugf0("Reading F10_DCTL_SEL_HIGH failed\n"); +} + +static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, + int hi_range_sel, u32 intlv_en) +{ + u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1; + + if (dct_ganging_enabled(pvt)) + cs = 0; + else if (hi_range_sel) + cs = dct_sel_high; + else if (dct_interleave_enabled(pvt)) { + if (dct_sel_interleave_addr(pvt) == 0) + cs = sys_addr >> 6 & 1; + else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) { + temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2; + + if (dct_sel_interleave_addr(pvt) & 1) + cs = (sys_addr >> 9 & 1) ^ temp; + else + cs = (sys_addr >> 6 & 1) ^ temp; + } else if (intlv_en & 4) + cs = sys_addr >> 15 & 1; + else if (intlv_en & 2) + cs = sys_addr >> 14 & 1; + else if (intlv_en & 1) + cs = sys_addr >> 13 & 1; + else + cs = sys_addr >> 12 & 1; + } else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt)) + cs = ~dct_sel_high & 1; + else + cs = 0; + + return cs; +} + +static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en) +{ + if (intlv_en == 1) + return 1; + else if (intlv_en == 3) + return 2; + else if (intlv_en == 7) + return 3; + + return 0; +} + +static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel, + u32 dct_sel_base_addr, + u64 dct_sel_base_off, + u32 hole_en, u32 hole_off, + u64 dram_base) +{ + u64 chan_off; + + if (hi_range_sel) { + if (!(dct_sel_base_addr & 0xFFFFF800) && + (hole_en & 1) && (sys_addr >= 0x100000000ULL)) + chan_off = hole_off << 16; + else + chan_off = dct_sel_base_off; + } else { + if ((hole_en & 1) && (sys_addr >= 0x100000000ULL)) + chan_off = hole_off << 16; + else + chan_off = dram_base & 0xFFFFF8000000ULL; + } + + return (sys_addr & 0x0000FFFFFFFFFFC0ULL) - + (chan_off & 0x0000FFFFFF800000ULL); +} + +/* Hack for the time being - Can we get this from BIOS?? */ +#define CH0SPARE_RANK 0 +#define CH1SPARE_RANK 1 + +/* + * checks if the csrow passed in is marked as SPARED, if so returns the new + * spare row + */ +static inline int f10_process_possible_spare(int csrow, + u32 cs, struct amd64_pvt *pvt) +{ + u32 swap_done; + u32 bad_dram_cs; + + /* Depending on channel, isolate respective SPARING info */ + if (cs) { + swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare); + bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare); + if (swap_done && (csrow == bad_dram_cs)) + csrow = CH1SPARE_RANK; + } else { + swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare); + bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare); + if (swap_done && (csrow == bad_dram_cs)) + csrow = CH0SPARE_RANK; + } + return csrow; +} + +/* + * Iterate over the DRAM DCT "base" and "mask" registers looking for a + * SystemAddr match on the specified 'ChannelSelect' and 'NodeID' + * + * Return: + * -EINVAL: NOT FOUND + * 0..csrow = Chip-Select Row + */ +static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) +{ + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + u32 cs_base, cs_mask; + int cs_found = -EINVAL; + int csrow; + + mci = mci_lookup[nid]; + if (!mci) + return cs_found; + + pvt = mci->pvt_info; + + debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs); + + for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) { + + cs_base = amd64_get_dct_base(pvt, cs, csrow); + if (!(cs_base & K8_DCSB_CS_ENABLE)) + continue; + + /* + * We have an ENABLED CSROW, Isolate just the MASK bits of the + * target: [28:19] and [13:5], which map to [36:27] and [21:13] + * of the actual address. + */ + cs_base &= REV_F_F1Xh_DCSB_BASE_BITS; + + /* + * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and + * [4:0] to become ON. Then mask off bits [28:0] ([36:8]) + */ + cs_mask = amd64_get_dct_mask(pvt, cs, csrow); + + debugf1(" CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n", + csrow, cs_base, cs_mask); + + cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF; + + debugf1(" Final CSMask=0x%x\n", cs_mask); + debugf1(" (InputAddr & ~CSMask)=0x%x " + "(CSBase & ~CSMask)=0x%x\n", + (in_addr & ~cs_mask), (cs_base & ~cs_mask)); + + if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) { + cs_found = f10_process_possible_spare(csrow, cs, pvt); + + debugf1(" MATCH csrow=%d\n", cs_found); + break; + } + } + return cs_found; +} + + -- cgit v1.2.3-18-g5258 From f71d0a05001afd10e2be491ca002c55c7df42ed8 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:22:43 +0200 Subject: amd64_edac: add F10h-and-later methods-p3 Borislav: - compute dct_sel_base_off in f10_match_to_this_node() correctly since it cannot be assumed that the Reserved bits are zero and they have to be masked out instead. - cleanup, remove StinkyIdentifiers, simplify logic - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 269 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 265 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 744a49ac9f5..c2e2c3c37f5 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1398,6 +1398,10 @@ static void f10_read_dram_ctl_register(struct amd64_pvt *pvt) debugf0("Reading F10_DCTL_SEL_HIGH failed\n"); } +/* + * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory + * Interleaving Modes. + */ static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, int hi_range_sel, u32 intlv_en) { @@ -1408,6 +1412,9 @@ static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, else if (hi_range_sel) cs = dct_sel_high; else if (dct_interleave_enabled(pvt)) { + /* + * see F2x110[DctSelIntLvAddr] - channel interleave mode + */ if (dct_sel_interleave_addr(pvt) == 0) cs = sys_addr >> 6 & 1; else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) { @@ -1445,22 +1452,23 @@ static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en) return 0; } -static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel, +/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */ +static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel, u32 dct_sel_base_addr, u64 dct_sel_base_off, - u32 hole_en, u32 hole_off, + u32 hole_valid, u32 hole_off, u64 dram_base) { u64 chan_off; if (hi_range_sel) { if (!(dct_sel_base_addr & 0xFFFFF800) && - (hole_en & 1) && (sys_addr >= 0x100000000ULL)) + hole_valid && (sys_addr >= 0x100000000ULL)) chan_off = hole_off << 16; else chan_off = dct_sel_base_off; } else { - if ((hole_en & 1) && (sys_addr >= 0x100000000ULL)) + if (hole_valid && (sys_addr >= 0x100000000ULL)) chan_off = hole_off << 16; else chan_off = dram_base & 0xFFFFF8000000ULL; @@ -1562,4 +1570,257 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs) return cs_found; } +/* For a given @dram_range, check if @sys_addr falls within it. */ +static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range, + u64 sys_addr, int *nid, int *chan_sel) +{ + int node_id, cs_found = -EINVAL, high_range = 0; + u32 intlv_en, intlv_sel, intlv_shift, hole_off; + u32 hole_valid, tmp, dct_sel_base, channel; + u64 dram_base, chan_addr, dct_sel_base_off; + + dram_base = pvt->dram_base[dram_range]; + intlv_en = pvt->dram_IntlvEn[dram_range]; + + node_id = pvt->dram_DstNode[dram_range]; + intlv_sel = pvt->dram_IntlvSel[dram_range]; + + debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n", + dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]); + + /* + * This assumes that one node's DHAR is the same as all the other + * nodes' DHAR. + */ + hole_off = (pvt->dhar & 0x0000FF80); + hole_valid = (pvt->dhar & 0x1); + dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16; + + debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n", + hole_off, hole_valid, intlv_sel); + + if (intlv_en || + (intlv_sel != ((sys_addr >> 12) & intlv_en))) + return -EINVAL; + + dct_sel_base = dct_sel_baseaddr(pvt); + + /* + * check whether addresses >= DctSelBaseAddr[47:27] are to be used to + * select between DCT0 and DCT1. + */ + if (dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt) && + ((sys_addr >> 27) >= (dct_sel_base >> 11))) + high_range = 1; + + channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en); + + chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base, + dct_sel_base_off, hole_valid, + hole_off, dram_base); + + intlv_shift = f10_map_intlv_en_to_shift(intlv_en); + + /* remove Node ID (in case of memory interleaving) */ + tmp = chan_addr & 0xFC0; + + chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp; + + /* remove channel interleave and hash */ + if (dct_interleave_enabled(pvt) && + !dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt)) { + if (dct_sel_interleave_addr(pvt) != 1) + chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL; + else { + tmp = chan_addr & 0xFC0; + chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1) + | tmp; + } + } + + debugf1(" (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n", + chan_addr, (u32)(chan_addr >> 8)); + + cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel); + + if (cs_found >= 0) { + *nid = node_id; + *chan_sel = channel; + } + return cs_found; +} + +static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr, + int *node, int *chan_sel) +{ + int dram_range, cs_found = -EINVAL; + u64 dram_base, dram_limit; + + for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) { + + if (!pvt->dram_rw_en[dram_range]) + continue; + + dram_base = pvt->dram_base[dram_range]; + dram_limit = pvt->dram_limit[dram_range]; + + if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) { + + cs_found = f10_match_to_this_node(pvt, dram_range, + sys_addr, node, + chan_sel); + if (cs_found >= 0) + break; + } + } + return cs_found; +} + +/* + * This the F10h reference code from AMD to map a @sys_addr to NodeID, + * CSROW, Channel. + * + * The @sys_addr is usually an error address received from the hardware. + */ +static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + u64 sys_addr) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 page, offset; + unsigned short syndrome; + int nid, csrow, chan = 0; + + csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan); + + if (csrow >= 0) { + error_address_to_page_and_offset(sys_addr, &page, &offset); + + syndrome = EXTRACT_HIGH_SYNDROME(info->nbsl) << 8; + syndrome |= EXTRACT_LOW_SYNDROME(info->nbsh); + + /* + * Is CHIPKILL on? If so, then we can attempt to use the + * syndrome to isolate which channel the error was on. + */ + if (pvt->nbcfg & K8_NBCFG_CHIPKILL) + chan = get_channel_from_ecc_syndrome(syndrome); + + if (chan >= 0) { + edac_mc_handle_ce(mci, page, offset, syndrome, + csrow, chan, EDAC_MOD_STR); + } else { + /* + * Channel unknown, report all channels on this + * CSROW as failed. + */ + for (chan = 0; chan < mci->csrows[csrow].nr_channels; + chan++) { + edac_mc_handle_ce(mci, page, offset, + syndrome, + csrow, chan, + EDAC_MOD_STR); + } + } + + } else { + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); + } +} + +/* + * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift + * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0 + * indicates an empty DIMM slot, as reported by Hardware on empty slots. + * + * Normalize to 128MB by subracting 27 bit shift. + */ +static int map_dbam_to_csrow_size(int index) +{ + int mega_bytes = 0; + + if (index > 0 && index <= DBAM_MAX_VALUE) + mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27))); + + return mega_bytes; +} + +/* + * debug routine to display the memory sizes of a DIMM (ganged or not) and it + * CSROWs as well + */ +static void f10_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt, + int ganged) +{ + int dimm, size0, size1; + u32 dbam; + u32 *dcsb; + + debugf1(" dbam%d: 0x%8.08x CSROW is %s\n", ctrl, + ctrl ? pvt->dbam1 : pvt->dbam0, + ganged ? "GANGED - dbam1 not used" : "NON-GANGED"); + + dbam = ctrl ? pvt->dbam1 : pvt->dbam0; + dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0; + + /* Dump memory sizes for DIMM and its CSROWs */ + for (dimm = 0; dimm < 4; dimm++) { + + size0 = 0; + if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE) + size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); + + size1 = 0; + if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE) + size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam)); + + debugf1(" CTRL-%d DIMM-%d=%5dMB CSROW-%d=%5dMB " + "CSROW-%d=%5dMB\n", + ctrl, + dimm, + size0 + size1, + dimm * 2, + size0, + dimm * 2 + 1, + size1); + } +} + +/* + * Very early hardware probe on pci_probe thread to determine if this module + * supports the hardware. + * + * Return: + * 0 for OK + * 1 for error + */ +static int f10_probe_valid_hardware(struct amd64_pvt *pvt) +{ + int ret = 0; + + /* + * If we are on a DDR3 machine, we don't know yet if + * we support that properly at this time + */ + if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) || + (pvt->dchr1 & F10_DCHR_Ddr3Mode)) { + + amd64_printk(KERN_WARNING, + "%s() This machine is running with DDR3 memory. " + "This is not currently supported. " + "DCHR0=0x%x DCHR1=0x%x\n", + __func__, pvt->dchr0, pvt->dchr1); + + amd64_printk(KERN_WARNING, + " Contact '%s' module MAINTAINER to help add" + " support.\n", + EDAC_MOD_STR); + + ret = 1; + + } + return ret; +} -- cgit v1.2.3-18-g5258 From 4d37607adbff69596a3170cf84badaf26efc59ac Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:25:05 +0200 Subject: amd64_edac: add per-family descriptors Borislav: - fix comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c2e2c3c37f5..e5f4a92faa3 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1824,3 +1824,75 @@ static int f10_probe_valid_hardware(struct amd64_pvt *pvt) return ret; } +/* + * There currently are 3 types type of MC devices for AMD Athlon/Opterons + * (as per PCI DEVICE_IDs): + * + * Family K8: That is the Athlon64 and Opteron CPUs. They all have the same PCI + * DEVICE ID, even though there is differences between the different Revisions + * (CG,D,E,F). + * + * Family F10h and F11h. + * + */ +static struct amd64_family_type amd64_family_types[] = { + [K8_CPUS] = { + .ctl_name = "RevF", + .addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP, + .misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC, + .ops = { + .early_channel_count = k8_early_channel_count, + .get_error_address = k8_get_error_address, + .read_dram_base_limit = k8_read_dram_base_limit, + .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, + .dbam_map_to_pages = k8_dbam_map_to_pages, + } + }, + [F10_CPUS] = { + .ctl_name = "Family 10h", + .addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP, + .misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC, + .ops = { + .probe_valid_hardware = f10_probe_valid_hardware, + .early_channel_count = f10_early_channel_count, + .get_error_address = f10_get_error_address, + .read_dram_base_limit = f10_read_dram_base_limit, + .read_dram_ctl_register = f10_read_dram_ctl_register, + .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, + .dbam_map_to_pages = f10_dbam_map_to_pages, + } + }, + [F11_CPUS] = { + .ctl_name = "Family 11h", + .addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP, + .misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC, + .ops = { + .probe_valid_hardware = f10_probe_valid_hardware, + .early_channel_count = f10_early_channel_count, + .get_error_address = f10_get_error_address, + .read_dram_base_limit = f10_read_dram_base_limit, + .read_dram_ctl_register = f10_read_dram_ctl_register, + .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow, + .dbam_map_to_pages = f10_dbam_map_to_pages, + } + }, +}; + +static struct pci_dev *pci_get_related_function(unsigned int vendor, + unsigned int device, + struct pci_dev *related) +{ + struct pci_dev *dev = NULL; + + dev = pci_get_device(vendor, device, dev); + while (dev) { + if ((dev->bus->number == related->bus->number) && + (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn))) + break; + dev = pci_get_device(vendor, device, dev); + } + + return dev; +} + + -- cgit v1.2.3-18-g5258 From b1289d6f9d23abab396077abb65d5a23a775cdb0 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 16:37:05 +0200 Subject: amd64_edac: add ECC chipkill syndrome mapping table Borislav: - fix comments - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index e5f4a92faa3..feb4986ea76 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1895,4 +1895,139 @@ static struct pci_dev *pci_get_related_function(unsigned int vendor, return dev; } +/* + * syndrome mapping table for ECC ChipKill devices + * + * The comment in each row is the token (nibble) number that is in error. + * The least significant nibble of the syndrome is the mask for the bits + * that are in error (need to be toggled) for the particular nibble. + * + * Each row contains 16 entries. + * The first entry (0th) is the channel number for that row of syndromes. + * The remaining 15 entries are the syndromes for the respective Error + * bit mask index. + * + * 1st index entry is 0x0001 mask, indicating that the rightmost bit is the + * bit in error. + * The 2nd index entry is 0x0010 that the second bit is damaged. + * The 3rd index entry is 0x0011 indicating that the rightmost 2 bits + * are damaged. + * Thus so on until index 15, 0x1111, whose entry has the syndrome + * indicating that all 4 bits are damaged. + * + * A search is performed on this table looking for a given syndrome. + * + * See the AMD documentation for ECC syndromes. This ECC table is valid + * across all the versions of the AMD64 processors. + * + * A fast lookup is to use the LAST four bits of the 16-bit syndrome as a + * COLUMN index, then search all ROWS of that column, looking for a match + * with the input syndrome. The ROW value will be the token number. + * + * The 0'th entry on that row, can be returned as the CHANNEL (0 or 1) of this + * error. + */ +#define NUMBER_ECC_ROWS 36 +static const unsigned short ecc_chipkill_syndromes[NUMBER_ECC_ROWS][16] = { + /* Channel 0 syndromes */ + {/*0*/ 0, 0xe821, 0x7c32, 0x9413, 0xbb44, 0x5365, 0xc776, 0x2f57, + 0xdd88, 0x35a9, 0xa1ba, 0x499b, 0x66cc, 0x8eed, 0x1afe, 0xf2df }, + {/*1*/ 0, 0x5d31, 0xa612, 0xfb23, 0x9584, 0xc8b5, 0x3396, 0x6ea7, + 0xeac8, 0xb7f9, 0x4cda, 0x11eb, 0x7f4c, 0x227d, 0xd95e, 0x846f }, + {/*2*/ 0, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, + 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f }, + {/*3*/ 0, 0x2021, 0x3032, 0x1013, 0x4044, 0x6065, 0x7076, 0x5057, + 0x8088, 0xa0a9, 0xb0ba, 0x909b, 0xc0cc, 0xe0ed, 0xf0fe, 0xd0df }, + {/*4*/ 0, 0x5041, 0xa082, 0xf0c3, 0x9054, 0xc015, 0x30d6, 0x6097, + 0xe0a8, 0xb0e9, 0x402a, 0x106b, 0x70fc, 0x20bd, 0xd07e, 0x803f }, + {/*5*/ 0, 0xbe21, 0xd732, 0x6913, 0x2144, 0x9f65, 0xf676, 0x4857, + 0x3288, 0x8ca9, 0xe5ba, 0x5b9b, 0x13cc, 0xaded, 0xc4fe, 0x7adf }, + {/*6*/ 0, 0x4951, 0x8ea2, 0xc7f3, 0x5394, 0x1ac5, 0xdd36, 0x9467, + 0xa1e8, 0xe8b9, 0x2f4a, 0x661b, 0xf27c, 0xbb2d, 0x7cde, 0x358f }, + {/*7*/ 0, 0x74e1, 0x9872, 0xec93, 0xd6b4, 0xa255, 0x4ec6, 0x3a27, + 0x6bd8, 0x1f39, 0xf3aa, 0x874b, 0xbd6c, 0xc98d, 0x251e, 0x51ff }, + {/*8*/ 0, 0x15c1, 0x2a42, 0x3f83, 0xcef4, 0xdb35, 0xe4b6, 0xf177, + 0x4758, 0x5299, 0x6d1a, 0x78db, 0x89ac, 0x9c6d, 0xa3ee, 0xb62f }, + {/*9*/ 0, 0x3d01, 0x1602, 0x2b03, 0x8504, 0xb805, 0x9306, 0xae07, + 0xca08, 0xf709, 0xdc0a, 0xe10b, 0x4f0c, 0x720d, 0x590e, 0x640f }, + {/*a*/ 0, 0x9801, 0xec02, 0x7403, 0x6b04, 0xf305, 0x8706, 0x1f07, + 0xbd08, 0x2509, 0x510a, 0xc90b, 0xd60c, 0x4e0d, 0x3a0e, 0xa20f }, + {/*b*/ 0, 0xd131, 0x6212, 0xb323, 0x3884, 0xe9b5, 0x5a96, 0x8ba7, + 0x1cc8, 0xcdf9, 0x7eda, 0xafeb, 0x244c, 0xf57d, 0x465e, 0x976f }, + {/*c*/ 0, 0xe1d1, 0x7262, 0x93b3, 0xb834, 0x59e5, 0xca56, 0x2b87, + 0xdc18, 0x3dc9, 0xae7a, 0x4fab, 0x542c, 0x85fd, 0x164e, 0xf79f }, + {/*d*/ 0, 0x6051, 0xb0a2, 0xd0f3, 0x1094, 0x70c5, 0xa036, 0xc067, + 0x20e8, 0x40b9, 0x904a, 0x601b, 0x307c, 0x502d, 0x80de, 0xe08f }, + {/*e*/ 0, 0xa4c1, 0xf842, 0x5c83, 0xe6f4, 0x4235, 0x1eb6, 0xba77, + 0x7b58, 0xdf99, 0x831a, 0x27db, 0x9dac, 0x396d, 0x65ee, 0xc12f }, + {/*f*/ 0, 0x11c1, 0x2242, 0x3383, 0xc8f4, 0xd935, 0xeab6, 0xfb77, + 0x4c58, 0x5d99, 0x6e1a, 0x7fdb, 0x84ac, 0x956d, 0xa6ee, 0xb72f }, + + /* Channel 1 syndromes */ + {/*10*/ 1, 0x45d1, 0x8a62, 0xcfb3, 0x5e34, 0x1be5, 0xd456, 0x9187, + 0xa718, 0xe2c9, 0x2d7a, 0x68ab, 0xf92c, 0xbcfd, 0x734e, 0x369f }, + {/*11*/ 1, 0x63e1, 0xb172, 0xd293, 0x14b4, 0x7755, 0xa5c6, 0xc627, + 0x28d8, 0x4b39, 0x99aa, 0xfa4b, 0x3c6c, 0x5f8d, 0x8d1e, 0xeeff }, + {/*12*/ 1, 0xb741, 0xd982, 0x6ec3, 0x2254, 0x9515, 0xfbd6, 0x4c97, + 0x33a8, 0x84e9, 0xea2a, 0x5d6b, 0x11fc, 0xa6bd, 0xc87e, 0x7f3f }, + {/*13*/ 1, 0xdd41, 0x6682, 0xbbc3, 0x3554, 0xe815, 0x53d6, 0xce97, + 0x1aa8, 0xc7e9, 0x7c2a, 0xa1fb, 0x2ffc, 0xf2bd, 0x497e, 0x943f }, + {/*14*/ 1, 0x2bd1, 0x3d62, 0x16b3, 0x4f34, 0x64e5, 0x7256, 0x5987, + 0x8518, 0xaec9, 0xb87a, 0x93ab, 0xca2c, 0xe1fd, 0xf74e, 0xdc9f }, + {/*15*/ 1, 0x83c1, 0xc142, 0x4283, 0xa4f4, 0x2735, 0x65b6, 0xe677, + 0xf858, 0x7b99, 0x391a, 0xbadb, 0x5cac, 0xdf6d, 0x9dee, 0x1e2f }, + {/*16*/ 1, 0x8fd1, 0xc562, 0x4ab3, 0xa934, 0x26e5, 0x6c56, 0xe387, + 0xfe18, 0x71c9, 0x3b7a, 0xb4ab, 0x572c, 0xd8fd, 0x924e, 0x1d9f }, + {/*17*/ 1, 0x4791, 0x89e2, 0xce73, 0x5264, 0x15f5, 0xdb86, 0x9c17, + 0xa3b8, 0xe429, 0x2a5a, 0x6dcb, 0xf1dc, 0xb64d, 0x783e, 0x3faf }, + {/*18*/ 1, 0x5781, 0xa9c2, 0xfe43, 0x92a4, 0xc525, 0x3b66, 0x6ce7, + 0xe3f8, 0xb479, 0x4a3a, 0x1dbb, 0x715c, 0x26dd, 0xd89e, 0x8f1f }, + {/*19*/ 1, 0xbf41, 0xd582, 0x6ac3, 0x2954, 0x9615, 0xfcd6, 0x4397, + 0x3ea8, 0x81e9, 0xeb2a, 0x546b, 0x17fc, 0xa8bd, 0xc27e, 0x7d3f }, + {/*1a*/ 1, 0x9891, 0xe1e2, 0x7273, 0x6464, 0xf7f5, 0x8586, 0x1617, + 0xb8b8, 0x2b29, 0x595a, 0xcacb, 0xdcdc, 0x4f4d, 0x3d3e, 0xaeaf }, + {/*1b*/ 1, 0xcce1, 0x4472, 0x8893, 0xfdb4, 0x3f55, 0xb9c6, 0x7527, + 0x56d8, 0x9a39, 0x12aa, 0xde4b, 0xab6c, 0x678d, 0xef1e, 0x23ff }, + {/*1c*/ 1, 0xa761, 0xf9b2, 0x5ed3, 0xe214, 0x4575, 0x1ba6, 0xbcc7, + 0x7328, 0xd449, 0x8a9a, 0x2dfb, 0x913c, 0x365d, 0x688e, 0xcfef }, + {/*1d*/ 1, 0xff61, 0x55b2, 0xaad3, 0x7914, 0x8675, 0x2ca6, 0xd3c7, + 0x9e28, 0x6149, 0xcb9a, 0x34fb, 0xe73c, 0x185d, 0xb28e, 0x4def }, + {/*1e*/ 1, 0x5451, 0xa8a2, 0xfcf3, 0x9694, 0xc2c5, 0x3e36, 0x6a67, + 0xebe8, 0xbfb9, 0x434a, 0x171b, 0x7d7c, 0x292d, 0xd5de, 0x818f }, + {/*1f*/ 1, 0x6fc1, 0xb542, 0xda83, 0x19f4, 0x7635, 0xacb6, 0xc377, + 0x2e58, 0x4199, 0x9b1a, 0xf4db, 0x37ac, 0x586d, 0x82ee, 0xed2f }, + + /* ECC bits are also in the set of tokens and they too can go bad + * first 2 cover channel 0, while the second 2 cover channel 1 + */ + {/*20*/ 0, 0xbe01, 0xd702, 0x6903, 0x2104, 0x9f05, 0xf606, 0x4807, + 0x3208, 0x8c09, 0xe50a, 0x5b0b, 0x130c, 0xad0d, 0xc40e, 0x7a0f }, + {/*21*/ 0, 0x4101, 0x8202, 0xc303, 0x5804, 0x1905, 0xda06, 0x9b07, + 0xac08, 0xed09, 0x2e0a, 0x6f0b, 0x640c, 0xb50d, 0x760e, 0x370f }, + {/*22*/ 1, 0xc441, 0x4882, 0x8cc3, 0xf654, 0x3215, 0xbed6, 0x7a97, + 0x5ba8, 0x9fe9, 0x132a, 0xd76b, 0xadfc, 0x69bd, 0xe57e, 0x213f }, + {/*23*/ 1, 0x7621, 0x9b32, 0xed13, 0xda44, 0xac65, 0x4176, 0x3757, + 0x6f88, 0x19a9, 0xf4ba, 0x829b, 0xb5cc, 0xc3ed, 0x2efe, 0x58df } +}; + +/* + * Given the syndrome argument, scan each of the channel tables for a syndrome + * match. Depending on which table it is found, return the channel number. + */ +static int get_channel_from_ecc_syndrome(unsigned short syndrome) +{ + int row; + int column; + /* Determine column to scan */ + column = syndrome & 0xF; + + /* Scan all rows, looking for syndrome, or end of table */ + for (row = 0; row < NUMBER_ECC_ROWS; row++) { + if (ecc_chipkill_syndromes[row][column] == syndrome) + return ecc_chipkill_syndromes[row][0]; + } + + debugf0("syndrome(%x) not found\n", syndrome); + return -1; +} -- cgit v1.2.3-18-g5258 From d27bf6fa369ca0272df10558d2f290d6fc72e675 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Wed, 6 May 2009 17:55:27 +0200 Subject: amd64_edac: add error decoding logic Borislav: - fold amd64_error_info_valid() into its only user - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 425 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 425 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index feb4986ea76..09991c8a6ee 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2031,3 +2031,428 @@ static int get_channel_from_ecc_syndrome(unsigned short syndrome) debugf0("syndrome(%x) not found\n", syndrome); return -1; } + +/* + * Check for valid error in the NB Status High register. If so, proceed to read + * NB Status Low, NB Address Low and NB Address High registers and store data + * into error structure. + * + * Returns: + * - 1: if hardware regs contains valid error info + * - 0: if no valid error is indicated + */ +static int amd64_get_error_info_regs(struct mem_ctl_info *mci, + struct amd64_error_info_regs *regs) +{ + struct amd64_pvt *pvt; + struct pci_dev *misc_f3_ctl; + int err = 0; + + pvt = mci->pvt_info; + misc_f3_ctl = pvt->misc_f3_ctl; + + err = pci_read_config_dword(misc_f3_ctl, K8_NBSH, ®s->nbsh); + if (err) + goto err_reg; + + if (!(regs->nbsh & K8_NBSH_VALID_BIT)) + return 0; + + /* valid error, read remaining error information registers */ + err = pci_read_config_dword(misc_f3_ctl, K8_NBSL, ®s->nbsl); + if (err) + goto err_reg; + + err = pci_read_config_dword(misc_f3_ctl, K8_NBEAL, ®s->nbeal); + if (err) + goto err_reg; + + err = pci_read_config_dword(misc_f3_ctl, K8_NBEAH, ®s->nbeah); + if (err) + goto err_reg; + + err = pci_read_config_dword(misc_f3_ctl, K8_NBCFG, ®s->nbcfg); + if (err) + goto err_reg; + + return 1; + +err_reg: + debugf0("Reading error info register failed\n"); + return 0; +} + +/* + * This function is called to retrieve the error data from hardware and store it + * in the info structure. + * + * Returns: + * - 1: if a valid error is found + * - 0: if no error is found + */ +static int amd64_get_error_info(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + struct amd64_pvt *pvt; + struct amd64_error_info_regs regs; + + pvt = mci->pvt_info; + + if (!amd64_get_error_info_regs(mci, info)) + return 0; + + /* + * Here's the problem with the K8's EDAC reporting: There are four + * registers which report pieces of error information. They are shared + * between CEs and UEs. Furthermore, contrary to what is stated in the + * BKDG, the overflow bit is never used! Every error always updates the + * reporting registers. + * + * Can you see the race condition? All four error reporting registers + * must be read before a new error updates them! There is no way to read + * all four registers atomically. The best than can be done is to detect + * that a race has occured and then report the error without any kind of + * precision. + * + * What is still positive is that errors are still reported and thus + * problems can still be detected - just not localized because the + * syndrome and address are spread out across registers. + * + * Grrrrr!!!!! Here's hoping that AMD fixes this in some future K8 rev. + * UEs and CEs should have separate register sets with proper overflow + * bits that are used! At very least the problem can be fixed by + * honoring the ErrValid bit in 'nbsh' and not updating registers - just + * set the overflow bit - unless the current error is CE and the new + * error is UE which would be the only situation for overwriting the + * current values. + */ + + regs = *info; + + /* Use info from the second read - most current */ + if (unlikely(!amd64_get_error_info_regs(mci, info))) + return 0; + + /* clear the error bits in hardware */ + pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT); + + /* Check for the possible race condition */ + if ((regs.nbsh != info->nbsh) || + (regs.nbsl != info->nbsl) || + (regs.nbeah != info->nbeah) || + (regs.nbeal != info->nbeal)) { + amd64_mc_printk(mci, KERN_WARNING, + "hardware STATUS read access race condition " + "detected!\n"); + return 0; + } + return 1; +} + +static inline void amd64_decode_gart_tlb_error(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + u32 err_code; + u32 ec_tt; /* error code transaction type (2b) */ + u32 ec_ll; /* error code cache level (2b) */ + + err_code = EXTRACT_ERROR_CODE(info->nbsl); + ec_ll = EXTRACT_LL_CODE(err_code); + ec_tt = EXTRACT_TT_CODE(err_code); + + amd64_mc_printk(mci, KERN_ERR, + "GART TLB event: transaction type(%s), " + "cache level(%s)\n", tt_msgs[ec_tt], ll_msgs[ec_ll]); +} + +static inline void amd64_decode_mem_cache_error(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + u32 err_code; + u32 ec_rrrr; /* error code memory transaction (4b) */ + u32 ec_tt; /* error code transaction type (2b) */ + u32 ec_ll; /* error code cache level (2b) */ + + err_code = EXTRACT_ERROR_CODE(info->nbsl); + ec_ll = EXTRACT_LL_CODE(err_code); + ec_tt = EXTRACT_TT_CODE(err_code); + ec_rrrr = EXTRACT_RRRR_CODE(err_code); + + amd64_mc_printk(mci, KERN_ERR, + "cache hierarchy error: memory transaction type(%s), " + "transaction type(%s), cache level(%s)\n", + rrrr_msgs[ec_rrrr], tt_msgs[ec_tt], ll_msgs[ec_ll]); +} + + +/* + * Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR + * ADDRESS and process. + */ +static void amd64_handle_ce(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u64 SystemAddress; + + /* Ensure that the Error Address is VALID */ + if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) { + amd64_mc_printk(mci, KERN_ERR, + "HW has no ERROR_ADDRESS available\n"); + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR); + return; + } + + SystemAddress = extract_error_address(mci, info); + + amd64_mc_printk(mci, KERN_ERR, + "CE ERROR_ADDRESS= 0x%llx\n", SystemAddress); + + pvt->ops->map_sysaddr_to_csrow(mci, info, SystemAddress); +} + +/* Handle any Un-correctable Errors (UEs) */ +static void amd64_handle_ue(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + int csrow; + u64 SystemAddress; + u32 page, offset; + struct mem_ctl_info *log_mci, *src_mci = NULL; + + log_mci = mci; + + if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) { + amd64_mc_printk(mci, KERN_CRIT, + "HW has no ERROR_ADDRESS available\n"); + edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); + return; + } + + SystemAddress = extract_error_address(mci, info); + + /* + * Find out which node the error address belongs to. This may be + * different from the node that detected the error. + */ + src_mci = find_mc_by_sys_addr(mci, SystemAddress); + if (!src_mci) { + amd64_mc_printk(mci, KERN_CRIT, + "ERROR ADDRESS (0x%lx) value NOT mapped to a MC\n", + (unsigned long)SystemAddress); + edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); + return; + } + + log_mci = src_mci; + + csrow = sys_addr_to_csrow(log_mci, SystemAddress); + if (csrow < 0) { + amd64_mc_printk(mci, KERN_CRIT, + "ERROR_ADDRESS (0x%lx) value NOT mapped to 'csrow'\n", + (unsigned long)SystemAddress); + edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR); + } else { + error_address_to_page_and_offset(SystemAddress, &page, &offset); + edac_mc_handle_ue(log_mci, page, offset, csrow, EDAC_MOD_STR); + } +} + +static void amd64_decode_bus_error(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info) +{ + u32 err_code, ext_ec; + u32 ec_pp; /* error code participating processor (2p) */ + u32 ec_to; /* error code timed out (1b) */ + u32 ec_rrrr; /* error code memory transaction (4b) */ + u32 ec_ii; /* error code memory or I/O (2b) */ + u32 ec_ll; /* error code cache level (2b) */ + + ext_ec = EXTRACT_EXT_ERROR_CODE(info->nbsl); + err_code = EXTRACT_ERROR_CODE(info->nbsl); + + ec_ll = EXTRACT_LL_CODE(err_code); + ec_ii = EXTRACT_II_CODE(err_code); + ec_rrrr = EXTRACT_RRRR_CODE(err_code); + ec_to = EXTRACT_TO_CODE(err_code); + ec_pp = EXTRACT_PP_CODE(err_code); + + amd64_mc_printk(mci, KERN_ERR, + "BUS ERROR:\n" + " time-out(%s) mem or i/o(%s)\n" + " participating processor(%s)\n" + " memory transaction type(%s)\n" + " cache level(%s) Error Found by: %s\n", + to_msgs[ec_to], + ii_msgs[ec_ii], + pp_msgs[ec_pp], + rrrr_msgs[ec_rrrr], + ll_msgs[ec_ll], + (info->nbsh & K8_NBSH_ERR_SCRUBER) ? + "Scrubber" : "Normal Operation"); + + /* If this was an 'observed' error, early out */ + if (ec_pp == K8_NBSL_PP_OBS) + return; /* We aren't the node involved */ + + /* Parse out the extended error code for ECC events */ + switch (ext_ec) { + /* F10 changed to one Extended ECC error code */ + case F10_NBSL_EXT_ERR_RES: /* Reserved field */ + case F10_NBSL_EXT_ERR_ECC: /* F10 ECC ext err code */ + break; + + default: + amd64_mc_printk(mci, KERN_ERR, "NOT ECC: no special error " + "handling for this error\n"); + return; + } + + if (info->nbsh & K8_NBSH_CECC) + amd64_handle_ce(mci, info); + else if (info->nbsh & K8_NBSH_UECC) + amd64_handle_ue(mci, info); + + /* + * If main error is CE then overflow must be CE. If main error is UE + * then overflow is unknown. We'll call the overflow a CE - if + * panic_on_ue is set then we're already panic'ed and won't arrive + * here. Else, then apparently someone doesn't think that UE's are + * catastrophic. + */ + if (info->nbsh & K8_NBSH_OVERFLOW) + edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR + "Error Overflow set"); +} + +int amd64_process_error_info(struct mem_ctl_info *mci, + struct amd64_error_info_regs *info, + int handle_errors) +{ + struct amd64_pvt *pvt; + struct amd64_error_info_regs *regs; + u32 err_code, ext_ec; + int gart_tlb_error = 0; + + pvt = mci->pvt_info; + + /* If caller doesn't want us to process the error, return */ + if (!handle_errors) + return 1; + + regs = info; + + debugf1("NorthBridge ERROR: mci(0x%p)\n", mci); + debugf1(" MC node(%d) Error-Address(0x%.8x-%.8x)\n", + pvt->mc_node_id, regs->nbeah, regs->nbeal); + debugf1(" nbsh(0x%.8x) nbsl(0x%.8x)\n", + regs->nbsh, regs->nbsl); + debugf1(" Valid Error=%s Overflow=%s\n", + (regs->nbsh & K8_NBSH_VALID_BIT) ? "True" : "False", + (regs->nbsh & K8_NBSH_OVERFLOW) ? "True" : "False"); + debugf1(" Err Uncorrected=%s MCA Error Reporting=%s\n", + (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) ? + "True" : "False", + (regs->nbsh & K8_NBSH_ERR_ENABLE) ? + "True" : "False"); + debugf1(" MiscErr Valid=%s ErrAddr Valid=%s PCC=%s\n", + (regs->nbsh & K8_NBSH_MISC_ERR_VALID) ? + "True" : "False", + (regs->nbsh & K8_NBSH_VALID_ERROR_ADDR) ? + "True" : "False", + (regs->nbsh & K8_NBSH_PCC) ? + "True" : "False"); + debugf1(" CECC=%s UECC=%s Found by Scruber=%s\n", + (regs->nbsh & K8_NBSH_CECC) ? + "True" : "False", + (regs->nbsh & K8_NBSH_UECC) ? + "True" : "False", + (regs->nbsh & K8_NBSH_ERR_SCRUBER) ? + "True" : "False"); + debugf1(" CORE0=%s CORE1=%s CORE2=%s CORE3=%s\n", + (regs->nbsh & K8_NBSH_CORE0) ? "True" : "False", + (regs->nbsh & K8_NBSH_CORE1) ? "True" : "False", + (regs->nbsh & K8_NBSH_CORE2) ? "True" : "False", + (regs->nbsh & K8_NBSH_CORE3) ? "True" : "False"); + + + err_code = EXTRACT_ERROR_CODE(regs->nbsl); + + /* Determine which error type: + * 1) GART errors - non-fatal, developmental events + * 2) MEMORY errors + * 3) BUS errors + * 4) Unknown error + */ + if (TEST_TLB_ERROR(err_code)) { + /* + * GART errors are intended to help graphics driver developers + * to detect bad GART PTEs. It is recommended by AMD to disable + * GART table walk error reporting by default[1] (currently + * being disabled in mce_cpu_quirks()) and according to the + * comment in mce_cpu_quirks(), such GART errors can be + * incorrectly triggered. We may see these errors anyway and + * unless requested by the user, they won't be reported. + * + * [1] section 13.10.1 on BIOS and Kernel Developers Guide for + * AMD NPT family 0Fh processors + */ + if (report_gart_errors == 0) + return 1; + + /* + * Only if GART error reporting is requested should we generate + * any logs. + */ + gart_tlb_error = 1; + + debugf1("GART TLB error\n"); + amd64_decode_gart_tlb_error(mci, info); + } else if (TEST_MEM_ERROR(err_code)) { + debugf1("Memory/Cache error\n"); + amd64_decode_mem_cache_error(mci, info); + } else if (TEST_BUS_ERROR(err_code)) { + debugf1("Bus (Link/DRAM) error\n"); + amd64_decode_bus_error(mci, info); + } else { + /* shouldn't reach here! */ + amd64_mc_printk(mci, KERN_WARNING, + "%s(): unknown MCE error 0x%x\n", __func__, + err_code); + } + + ext_ec = EXTRACT_EXT_ERROR_CODE(regs->nbsl); + amd64_mc_printk(mci, KERN_ERR, + "ExtErr=(0x%x) %s\n", ext_ec, ext_msgs[ext_ec]); + + if (((ext_ec >= F10_NBSL_EXT_ERR_CRC && + ext_ec <= F10_NBSL_EXT_ERR_TGT) || + (ext_ec == F10_NBSL_EXT_ERR_RMW)) && + EXTRACT_LDT_LINK(info->nbsh)) { + + amd64_mc_printk(mci, KERN_ERR, + "Error on hypertransport link: %s\n", + htlink_msgs[ + EXTRACT_LDT_LINK(info->nbsh)]); + } + + /* + * Check the UE bit of the NB status high register, if set generate some + * logs. If NOT a GART error, then process the event as a NO-INFO event. + * If it was a GART error, skip that process. + */ + if (regs->nbsh & K8_NBSH_UNCORRECTED_ERR) { + amd64_mc_printk(mci, KERN_CRIT, "uncorrected error\n"); + if (!gart_tlb_error) + edac_mc_handle_ue_no_info(mci, "UE bit is set\n"); + } + + if (regs->nbsh & K8_NBSH_PCC) + amd64_mc_printk(mci, KERN_CRIT, + "PCC (processor context corrupt) set\n"); + + return 1; +} +EXPORT_SYMBOL_GPL(amd64_process_error_info); + + -- cgit v1.2.3-18-g5258 From 0ec449ee95b20245fef4aa9fa2486456f1540514 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 19:41:25 +0200 Subject: amd64_edac: add EDAC core-related initializers Borislav: - add a amd64_free_mc_sibling_devices() helper instead of opencoding the release-path. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 315 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 315 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 09991c8a6ee..5a6e714b115 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2455,4 +2455,319 @@ int amd64_process_error_info(struct mem_ctl_info *mci, } EXPORT_SYMBOL_GPL(amd64_process_error_info); +/* + * The main polling 'check' function, called FROM the edac core to perform the + * error checking and if an error is encountered, error processing. + */ +static void amd64_check(struct mem_ctl_info *mci) +{ + struct amd64_error_info_regs info; + + if (amd64_get_error_info(mci, &info)) + amd64_process_error_info(mci, &info, 1); +} + +/* + * Input: + * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer + * 2) AMD Family index value + * + * Ouput: + * Upon return of 0, the following filled in: + * + * struct pvt->addr_f1_ctl + * struct pvt->misc_f3_ctl + * + * Filled in with related device funcitions of 'dram_f2_ctl' + * These devices are "reserved" via the pci_get_device() + * + * Upon return of 1 (error status): + * + * Nothing reserved + */ +static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx) +{ + const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx]; + + /* Reserve the ADDRESS MAP Device */ + pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, + amd64_dev->addr_f1_ctl, + pvt->dram_f2_ctl); + + if (!pvt->addr_f1_ctl) { + amd64_printk(KERN_ERR, "error address map device not found: " + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl); + return 1; + } + + /* Reserve the MISC Device */ + pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor, + amd64_dev->misc_f3_ctl, + pvt->dram_f2_ctl); + + if (!pvt->misc_f3_ctl) { + pci_dev_put(pvt->addr_f1_ctl); + pvt->addr_f1_ctl = NULL; + + amd64_printk(KERN_ERR, "error miscellaneous device not found: " + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl); + return 1; + } + + debugf1(" Addr Map device PCI Bus ID:\t%s\n", + pci_name(pvt->addr_f1_ctl)); + debugf1(" DRAM MEM-CTL PCI Bus ID:\t%s\n", + pci_name(pvt->dram_f2_ctl)); + debugf1(" Misc device PCI Bus ID:\t%s\n", + pci_name(pvt->misc_f3_ctl)); + + return 0; +} + +static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt) +{ + pci_dev_put(pvt->addr_f1_ctl); + pci_dev_put(pvt->misc_f3_ctl); +} + +/* + * Retrieve the hardware registers of the memory controller (this includes the + * 'Address Map' and 'Misc' device regs) + */ +static void amd64_read_mc_registers(struct amd64_pvt *pvt) +{ + u64 msr_val; + int dram, err = 0; + + /* + * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since + * those are Read-As-Zero + */ + rdmsrl(MSR_K8_TOP_MEM1, msr_val); + pvt->top_mem = msr_val >> 23; + debugf0(" TOP_MEM=0x%08llx\n", pvt->top_mem); + + /* check first whether TOP_MEM2 is enabled */ + rdmsrl(MSR_K8_SYSCFG, msr_val); + if (msr_val & (1U << 21)) { + rdmsrl(MSR_K8_TOP_MEM2, msr_val); + pvt->top_mem2 = msr_val >> 23; + debugf0(" TOP_MEM2=0x%08llx\n", pvt->top_mem2); + } else + debugf0(" TOP_MEM2 disabled.\n"); + + amd64_cpu_display_info(pvt); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap); + if (err) + goto err_reg; + + if (pvt->ops->read_dram_ctl_register) + pvt->ops->read_dram_ctl_register(pvt); + + for (dram = 0; dram < DRAM_REG_COUNT; dram++) { + /* + * Call CPU specific READ function to get the DRAM Base and + * Limit values from the DCT. + */ + pvt->ops->read_dram_base_limit(pvt, dram); + + /* + * Only print out debug info on rows with both R and W Enabled. + * Normal processing, compiler should optimize this whole 'if' + * debug output block away. + */ + if (pvt->dram_rw_en[dram] != 0) { + debugf1(" DRAM_BASE[%d]: 0x%8.08x-%8.08x " + "DRAM_LIMIT: 0x%8.08x-%8.08x\n", + dram, + (u32)(pvt->dram_base[dram] >> 32), + (u32)(pvt->dram_base[dram] & 0xFFFFFFFF), + (u32)(pvt->dram_limit[dram] >> 32), + (u32)(pvt->dram_limit[dram] & 0xFFFFFFFF)); + debugf1(" IntlvEn=%s %s %s " + "IntlvSel=%d DstNode=%d\n", + pvt->dram_IntlvEn[dram] ? + "Enabled" : "Disabled", + (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W", + (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R", + pvt->dram_IntlvSel[dram], + pvt->dram_DstNode[dram]); + } + } + + amd64_read_dct_base_mask(pvt); + + err = pci_read_config_dword(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar); + if (err) + goto err_reg; + + amd64_read_dbam_reg(pvt); + + err = pci_read_config_dword(pvt->misc_f3_ctl, + F10_ONLINE_SPARE, &pvt->online_spare); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0); + if (err) + goto err_reg; + + if (!dct_ganging_enabled(pvt)) { + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCLR_1, + &pvt->dclr1); + if (err) + goto err_reg; + + err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCHR_1, + &pvt->dchr1); + if (err) + goto err_reg; + } + + amd64_dump_misc_regs(pvt); + +err_reg: + debugf0("Reading an MC register failed\n"); + +} + +/* + * NOTE: CPU Revision Dependent code + * + * Input: + * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1) + * k8 private pointer to --> + * DRAM Bank Address mapping register + * node_id + * DCL register where dual_channel_active is + * + * The DBAM register consists of 4 sets of 4 bits each definitions: + * + * Bits: CSROWs + * 0-3 CSROWs 0 and 1 + * 4-7 CSROWs 2 and 3 + * 8-11 CSROWs 4 and 5 + * 12-15 CSROWs 6 and 7 + * + * Values range from: 0 to 15 + * The meaning of the values depends on CPU revision and dual-channel state, + * see relevant BKDG more info. + * + * The memory controller provides for total of only 8 CSROWs in its current + * architecture. Each "pair" of CSROWs normally represents just one DIMM in + * single channel or two (2) DIMMs in dual channel mode. + * + * The following code logic collapses the various tables for CSROW based on CPU + * revision. + * + * Returns: + * The number of PAGE_SIZE pages on the specified CSROW number it + * encompasses + * + */ +static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt) +{ + u32 dram_map, nr_pages; + + /* + * The math on this doesn't look right on the surface because x/2*4 can + * be simplified to x*2 but this expression makes use of the fact that + * it is integral math where 1/2=0. This intermediate value becomes the + * number of bits to shift the DBAM register to extract the proper CSROW + * field. + */ + dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF; + + nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map); + + /* + * If dual channel then double the memory size of single channel. + * Channel count is 1 or 2 + */ + nr_pages <<= (pvt->channel_count - 1); + + debugf0(" (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map); + debugf0(" nr_pages= %u channel-count = %d\n", + nr_pages, pvt->channel_count); + + return nr_pages; +} + +/* + * Initialize the array of csrow attribute instances, based on the values + * from pci config hardware registers. + */ +static int amd64_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow; + struct amd64_pvt *pvt; + u64 input_addr_min, input_addr_max, sys_addr; + int i, err = 0, empty = 1; + + pvt = mci->pvt_info; + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg); + if (err) + debugf0("Reading K8_NBCFG failed\n"); + + debugf0("NBCFG= 0x%x CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg, + (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", + (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled" + ); + + for (i = 0; i < CHIPSELECT_COUNT; i++) { + csrow = &mci->csrows[i]; + + if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) { + debugf1("----CSROW %d EMPTY for node %d\n", i, + pvt->mc_node_id); + continue; + } + + debugf1("----CSROW %d VALID for MC node %d\n", + i, pvt->mc_node_id); + + empty = 0; + csrow->nr_pages = amd64_csrow_nr_pages(i, pvt); + find_csrow_limits(mci, i, &input_addr_min, &input_addr_max); + sys_addr = input_addr_to_sys_addr(mci, input_addr_min); + csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT); + sys_addr = input_addr_to_sys_addr(mci, input_addr_max); + csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT); + csrow->page_mask = ~mask_from_dct_mask(pvt, i); + /* 8 bytes of resolution */ + + csrow->mtype = amd64_determine_memory_type(pvt); + + debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i); + debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n", + (unsigned long)input_addr_min, + (unsigned long)input_addr_max); + debugf1(" sys_addr: 0x%lx page_mask: 0x%lx\n", + (unsigned long)sys_addr, csrow->page_mask); + debugf1(" nr_pages: %u first_page: 0x%lx " + "last_page: 0x%lx\n", + (unsigned)csrow->nr_pages, + csrow->first_page, csrow->last_page); + + /* + * determine whether CHIPKILL or JUST ECC or NO ECC is operating + */ + if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) + csrow->edac_mode = + (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? + EDAC_S4ECD4ED : EDAC_SECDED; + else + csrow->edac_mode = EDAC_NONE; + } + + return empty; +} -- cgit v1.2.3-18-g5258 From f9431992b6227069bc54800d55531c6f78d276a7 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 19:46:08 +0200 Subject: amd64_edac: add ECC reporting initializers Borislav: - convert to the new {rd|wr}msr_on_cpus interfaces. - convert pvt->old_mcgctl to a bitmask thus saving some bytes - fix/cleanup comments - fix function return value patterns - add a proper bugfix found by Doug to amd64_check_ecc_enabled where we missed checking for the ECC enabled bit in NB CFG. - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 207 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/edac/amd64_edac.h | 3 +- 2 files changed, 209 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 5a6e714b115..3b6c421531c 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2771,3 +2771,210 @@ static int amd64_init_csrows(struct mem_ctl_info *mci) return empty; } +/* + * Only if 'ecc_enable_override' is set AND BIOS had ECC disabled, do "we" + * enable it. + */ +static void amd64_enable_ecc_error_reporting(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id); + int cpu, idx = 0, err = 0; + struct msr msrs[cpumask_weight(cpumask)]; + u32 value; + u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; + + if (!ecc_enable_override) + return; + + memset(msrs, 0, sizeof(msrs)); + + amd64_printk(KERN_WARNING, + "'ecc_enable_override' parameter is active, " + "Enabling AMD ECC hardware now: CAUTION\n"); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value); + if (err) + debugf0("Reading K8_NBCTL failed\n"); + + /* turn on UECCn and CECCEn bits */ + pvt->old_nbctl = value & mask; + pvt->nbctl_mcgctl_saved = 1; + + value |= mask; + pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value); + + rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); + + for_each_cpu(cpu, cpumask) { + if (msrs[idx].l & K8_MSR_MCGCTL_NBE) + set_bit(idx, &pvt->old_mcgctl); + + msrs[idx].l |= K8_MSR_MCGCTL_NBE; + idx++; + } + wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); + if (err) + debugf0("Reading K8_NBCFG failed\n"); + + debugf0("NBCFG(1)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value, + (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", + (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"); + + if (!(value & K8_NBCFG_ECC_ENABLE)) { + amd64_printk(KERN_WARNING, + "This node reports that DRAM ECC is " + "currently Disabled; ENABLING now\n"); + + /* Attempt to turn on DRAM ECC Enable */ + value |= K8_NBCFG_ECC_ENABLE; + pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); + if (err) + debugf0("Reading K8_NBCFG failed\n"); + + if (!(value & K8_NBCFG_ECC_ENABLE)) { + amd64_printk(KERN_WARNING, + "Hardware rejects Enabling DRAM ECC checking\n" + "Check memory DIMM configuration\n"); + } else { + amd64_printk(KERN_DEBUG, + "Hardware accepted DRAM ECC Enable\n"); + } + } + debugf0("NBCFG(2)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value, + (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled", + (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"); + + pvt->ctl_error_info.nbcfg = value; +} + +static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt) +{ + const cpumask_t *cpumask = cpumask_of_node(pvt->mc_node_id); + int cpu, idx = 0, err = 0; + struct msr msrs[cpumask_weight(cpumask)]; + u32 value; + u32 mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn; + + if (!pvt->nbctl_mcgctl_saved) + return; + + memset(msrs, 0, sizeof(msrs)); + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCTL, &value); + if (err) + debugf0("Reading K8_NBCTL failed\n"); + value &= ~mask; + value |= pvt->old_nbctl; + + /* restore the NB Enable MCGCTL bit */ + pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value); + + rdmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); + + for_each_cpu(cpu, cpumask) { + msrs[idx].l &= ~K8_MSR_MCGCTL_NBE; + msrs[idx].l |= + test_bit(idx, &pvt->old_mcgctl) << K8_MSR_MCGCTL_NBE; + idx++; + } + + wrmsr_on_cpus(cpumask, K8_MSR_MCGCTL, msrs); +} + +static void check_mcg_ctl(void *ret) +{ + u64 msr_val = 0; + u8 nbe; + + rdmsrl(MSR_IA32_MCG_CTL, msr_val); + nbe = msr_val & K8_MSR_MCGCTL_NBE; + + debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n", + raw_smp_processor_id(), msr_val, + (nbe ? "enabled" : "disabled")); + + if (!nbe) + *(int *)ret = 0; +} + +/* check MCG_CTL on all the cpus on this node */ +static int amd64_mcg_ctl_enabled_on_cpus(const cpumask_t *mask) +{ + int ret = 1; + preempt_disable(); + smp_call_function_many(mask, check_mcg_ctl, &ret, 1); + preempt_enable(); + + return ret; +} + +/* + * EDAC requires that the BIOS have ECC enabled before taking over the + * processing of ECC errors. This is because the BIOS can properly initialize + * the memory system completely. A command line option allows to force-enable + * hardware ECC later in amd64_enable_ecc_error_reporting(). + */ +static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) +{ + u32 value; + int err = 0, ret = 0; + u8 ecc_enabled = 0; + + err = pci_read_config_dword(pvt->misc_f3_ctl, K8_NBCFG, &value); + if (err) + debugf0("Reading K8_NBCTL failed\n"); + + ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE); + + ret = amd64_mcg_ctl_enabled_on_cpus(cpumask_of_node(pvt->mc_node_id)); + + debugf0("K8_NBCFG=0x%x, DRAM ECC is %s\n", value, + (value & K8_NBCFG_ECC_ENABLE ? "enabled" : "disabled")); + + if (!ecc_enabled || !ret) { + if (!ecc_enabled) { + amd64_printk(KERN_WARNING, "This node reports that " + "Memory ECC is currently " + "disabled.\n"); + + amd64_printk(KERN_WARNING, "bit 0x%lx in register " + "F3x%x of the MISC_CONTROL device (%s) " + "should be enabled\n", K8_NBCFG_ECC_ENABLE, + K8_NBCFG, pci_name(pvt->misc_f3_ctl)); + } + if (!ret) { + amd64_printk(KERN_WARNING, "bit 0x%016lx in MSR 0x%08x " + "of node %d should be enabled\n", + K8_MSR_MCGCTL_NBE, MSR_IA32_MCG_CTL, + pvt->mc_node_id); + } + if (!ecc_enable_override) { + amd64_printk(KERN_WARNING, "WARNING: ECC is NOT " + "currently enabled by the BIOS. Module " + "will NOT be loaded.\n" + " Either Enable ECC in the BIOS, " + "or use the 'ecc_enable_override' " + "parameter.\n" + " Might be a BIOS bug, if BIOS says " + "ECC is enabled\n" + " Use of the override can cause " + "unknown side effects.\n"); + ret = -ENODEV; + } + } else { + amd64_printk(KERN_INFO, + "ECC is enabled by BIOS, Proceeding " + "with EDAC module initialization\n"); + + /* CLEAR the override, since BIOS controlled it */ + ecc_enable_override = 0; + } + + return ret; +} + diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 6f5d5d62cef..e7aa760614c 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -70,6 +70,7 @@ #include #include #include +#include #include "edac_core.h" #define amd64_printk(level, fmt, arg...) \ @@ -549,7 +550,7 @@ struct amd64_pvt { /* Save old hw registers' values before we modified them */ u32 nbctl_mcgctl_saved; /* When true, following 2 are valid */ u32 old_nbctl; - u32 *old_mcgctl; /* per core on this node */ + unsigned long old_mcgctl; /* per core on this node */ /* MC Type Index value: socket F vs Family 10h */ u32 mc_type_index; -- cgit v1.2.3-18-g5258 From 7d6034d3213e2dd1c0f8678e11064007413011c4 Mon Sep 17 00:00:00 2001 From: Doug Thompson Date: Mon, 27 Apr 2009 20:01:01 +0200 Subject: amd64_edac: add module registration routines Also, link into Kbuild by adding Kconfig and Makefile entries. Borislav: - Kconfig/Makefile splitting - use zero-sized arrays for the sysfs attrs if not enabled - rename sysfs attrs to more conform values - shorten CONFIG_ names - make multiple structure members assignment vertically aligned - fix/cleanup comments - fix function return value patterns - fix err labels - fix a memleak bug caught by Ingo - remove the NUMA dependency and use num_k8_northbrides for initializing a driver instance per NB. - do not copy the pvt contents into the mci struct in amd64_init_2nd_stage() and save it in the mci->pvt_info void ptr instead. - cleanup debug calls - simplify amd64_setup_pci_device() Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/Kconfig | 26 ++++ drivers/edac/Makefile | 7 + drivers/edac/amd64_edac.c | 374 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/edac/amd64_edac.h | 15 ++ 4 files changed, 422 insertions(+) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 956982f8739..3dc650a7422 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -58,6 +58,32 @@ config EDAC_MM_EDAC occurred so that a particular failing memory module can be replaced. If unsure, select 'Y'. +config EDAC_AMD64 + tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h" + depends on EDAC_MM_EDAC && X86 && PCI + default m + help + Support for error detection and correction on the AMD 64 + Families of Memory Controllers (K8, F10h and F11h) + +config EDAC_AMD64_ERROR_INJECTION + bool "Sysfs Error Injection facilities" + depends on EDAC_AMD64 + help + Recent Opterons (Family 10h and later) provide for Memory Error + Injection into the ECC detection circuits. The amd64_edac module + allows the operator/user to inject Uncorrectable and Correctable + errors into DRAM. + + When enabled, in each of the respective memory controller directories + (/sys/devices/system/edac/mc/mcX), there are 3 input files: + + - inject_section (0..3, 16-byte section of 64-byte cacheline), + - inject_word (0..8, 16-bit word of 16-byte section), + - inject_ecc_vector (hex ecc vector: select bits of inject word) + + In addition, there are two control files, inject_read and inject_write, + which trigger the DRAM ECC Read and Write respectively. config EDAC_AMD76X tristate "AMD 76x (760, 762, 768)" diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 59076819135..633dc5604ee 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -30,6 +30,13 @@ obj-$(CONFIG_EDAC_I3000) += i3000_edac.o obj-$(CONFIG_EDAC_X38) += x38_edac.o obj-$(CONFIG_EDAC_I82860) += i82860_edac.o obj-$(CONFIG_EDAC_R82600) += r82600_edac.o + +amd64_edac_mod-y := amd64_edac_err_types.o amd64_edac.o +amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o +amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o + +obj-$(CONFIG_EDAC_AMD64) += amd64_edac_mod.o + obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3b6c421531c..c36bf40568c 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1,4 +1,5 @@ #include "amd64_edac.h" +#include static struct edac_pci_ctl_info *amd64_ctl_pci; @@ -2978,3 +2979,376 @@ static int amd64_check_ecc_enabled(struct amd64_pvt *pvt) return ret; } +struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) + + ARRAY_SIZE(amd64_inj_attrs) + + 1]; + +struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } }; + +static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci) +{ + unsigned int i = 0, j = 0; + + for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++) + sysfs_attrs[i] = amd64_dbg_attrs[i]; + + for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++) + sysfs_attrs[i] = amd64_inj_attrs[j]; + + sysfs_attrs[i] = terminator; + + mci->mc_driver_sysfs_attributes = sysfs_attrs; +} + +static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + + if (pvt->nbcap & K8_NBCAP_SECDED) + mci->edac_ctl_cap |= EDAC_FLAG_SECDED; + + if (pvt->nbcap & K8_NBCAP_CHIPKILL) + mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED; + + mci->edac_cap = amd64_determine_edac_cap(pvt); + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = EDAC_AMD64_VERSION; + mci->ctl_name = get_amd_family_name(pvt->mc_type_index); + mci->dev_name = pci_name(pvt->dram_f2_ctl); + mci->ctl_page_to_phys = NULL; + + /* IMPORTANT: Set the polling 'check' function in this module */ + mci->edac_check = amd64_check; + + /* memory scrubber interface */ + mci->set_sdram_scrub_rate = amd64_set_scrub_rate; + mci->get_sdram_scrub_rate = amd64_get_scrub_rate; +} + +/* + * Init stuff for this DRAM Controller device. + * + * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration + * Space feature MUST be enabled on ALL Processors prior to actually reading + * from the ECS registers. Since the loading of the module can occur on any + * 'core', and cores don't 'see' all the other processors ECS data when the + * others are NOT enabled. Our solution is to first enable ECS access in this + * routine on all processors, gather some data in a amd64_pvt structure and + * later come back in a finish-setup function to perform that final + * initialization. See also amd64_init_2nd_stage() for that. + */ +static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl, + int mc_type_index) +{ + struct amd64_pvt *pvt = NULL; + int err = 0, ret; + + ret = -ENOMEM; + pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL); + if (!pvt) + goto err_exit; + + pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl); + + pvt->dram_f2_ctl = dram_f2_ctl; + pvt->ext_model = boot_cpu_data.x86_model >> 4; + pvt->mc_type_index = mc_type_index; + pvt->ops = family_ops(mc_type_index); + pvt->old_mcgctl = 0; + + /* + * We have the dram_f2_ctl device as an argument, now go reserve its + * sibling devices from the PCI system. + */ + ret = -ENODEV; + err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index); + if (err) + goto err_free; + + ret = -EINVAL; + err = amd64_check_ecc_enabled(pvt); + if (err) + goto err_put; + + /* + * Key operation here: setup of HW prior to performing ops on it. Some + * setup is required to access ECS data. After this is performed, the + * 'teardown' function must be called upon error and normal exit paths. + */ + if (boot_cpu_data.x86 >= 0x10) + amd64_setup(pvt); + + /* + * Save the pointer to the private data for use in 2nd initialization + * stage + */ + pvt_lookup[pvt->mc_node_id] = pvt; + + return 0; + +err_put: + amd64_free_mc_sibling_devices(pvt); + +err_free: + kfree(pvt); + +err_exit: + return ret; +} + +/* + * This is the finishing stage of the init code. Needs to be performed after all + * MCs' hardware have been prepped for accessing extended config space. + */ +static int amd64_init_2nd_stage(struct amd64_pvt *pvt) +{ + int node_id = pvt->mc_node_id; + struct mem_ctl_info *mci; + int ret, err = 0; + + amd64_read_mc_registers(pvt); + + ret = -ENODEV; + if (pvt->ops->probe_valid_hardware) { + err = pvt->ops->probe_valid_hardware(pvt); + if (err) + goto err_exit; + } + + /* + * We need to determine how many memory channels there are. Then use + * that information for calculating the size of the dynamic instance + * tables in the 'mci' structure + */ + pvt->channel_count = pvt->ops->early_channel_count(pvt); + if (pvt->channel_count < 0) + goto err_exit; + + ret = -ENOMEM; + mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id); + if (!mci) + goto err_exit; + + mci->pvt_info = pvt; + + mci->dev = &pvt->dram_f2_ctl->dev; + amd64_setup_mci_misc_attributes(mci); + + if (amd64_init_csrows(mci)) + mci->edac_cap = EDAC_FLAG_NONE; + + amd64_enable_ecc_error_reporting(mci); + amd64_set_mc_sysfs_attributes(mci); + + ret = -ENODEV; + if (edac_mc_add_mc(mci)) { + debugf1("failed edac_mc_add_mc()\n"); + goto err_add_mc; + } + + mci_lookup[node_id] = mci; + pvt_lookup[node_id] = NULL; + return 0; + +err_add_mc: + edac_mc_free(mci); + +err_exit: + debugf0("failure to init 2nd stage: ret=%d\n", ret); + + amd64_restore_ecc_error_reporting(pvt); + + if (boot_cpu_data.x86 > 0xf) + amd64_teardown(pvt); + + amd64_free_mc_sibling_devices(pvt); + + kfree(pvt_lookup[pvt->mc_node_id]); + pvt_lookup[node_id] = NULL; + + return ret; +} + + +static int __devinit amd64_init_one_instance(struct pci_dev *pdev, + const struct pci_device_id *mc_type) +{ + int ret = 0; + + debugf0("(MC node=%d,mc_type='%s')\n", + get_mc_node_id_from_pdev(pdev), + get_amd_family_name(mc_type->driver_data)); + + ret = pci_enable_device(pdev); + if (ret < 0) + ret = -EIO; + else + ret = amd64_probe_one_instance(pdev, mc_type->driver_data); + + if (ret < 0) + debugf0("ret=%d\n", ret); + + return ret; +} + +static void __devexit amd64_remove_one_instance(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + + /* Remove from EDAC CORE tracking list */ + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + pvt = mci->pvt_info; + + amd64_restore_ecc_error_reporting(pvt); + + if (boot_cpu_data.x86 > 0xf) + amd64_teardown(pvt); + + amd64_free_mc_sibling_devices(pvt); + + kfree(pvt); + mci->pvt_info = NULL; + + mci_lookup[pvt->mc_node_id] = NULL; + + /* Free the EDAC CORE resources */ + edac_mc_free(mci); +} + +/* + * This table is part of the interface for loading drivers for PCI devices. The + * PCI core identifies what devices are on a system during boot, and then + * inquiry this table to see if this driver is for a given device found. + */ +static const struct pci_device_id amd64_pci_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = K8_CPUS + }, + { + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = F10_CPUS + }, + { + .vendor = PCI_VENDOR_ID_AMD, + .device = PCI_DEVICE_ID_AMD_11H_NB_DRAM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = F11_CPUS + }, + {0, } +}; +MODULE_DEVICE_TABLE(pci, amd64_pci_table); + +static struct pci_driver amd64_pci_driver = { + .name = EDAC_MOD_STR, + .probe = amd64_init_one_instance, + .remove = __devexit_p(amd64_remove_one_instance), + .id_table = amd64_pci_table, +}; + +static void amd64_setup_pci_device(void) +{ + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + + if (amd64_ctl_pci) + return; + + mci = mci_lookup[0]; + if (mci) { + + pvt = mci->pvt_info; + amd64_ctl_pci = + edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev, + EDAC_MOD_STR); + + if (!amd64_ctl_pci) { + pr_warning("%s(): Unable to create PCI control\n", + __func__); + + pr_warning("%s(): PCI error report via EDAC not set\n", + __func__); + } + } +} + +static int __init amd64_edac_init(void) +{ + int nb, err = -ENODEV; + + edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n"); + + opstate_init(); + + if (cache_k8_northbridges() < 0) + goto err_exit; + + err = pci_register_driver(&amd64_pci_driver); + if (err) + return err; + + /* + * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd + * amd64_pvt structs. These will be used in the 2nd stage init function + * to finish initialization of the MC instances. + */ + for (nb = 0; nb < num_k8_northbridges; nb++) { + if (!pvt_lookup[nb]) + continue; + + err = amd64_init_2nd_stage(pvt_lookup[nb]); + if (err) + goto err_exit; + } + + amd64_setup_pci_device(); + + return 0; + +err_exit: + debugf0("'finish_setup' stage failed\n"); + pci_unregister_driver(&amd64_pci_driver); + + return err; +} + +static void __exit amd64_edac_exit(void) +{ + if (amd64_ctl_pci) + edac_pci_release_generic_ctl(amd64_ctl_pci); + + pci_unregister_driver(&amd64_pci_driver); +} + +module_init(amd64_edac_init); +module_exit(amd64_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, " + "Dave Peterson, Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for AMD64 memory controllers - " + EDAC_AMD64_VERSION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index e7aa760614c..a159957e167 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -577,6 +577,21 @@ extern const char *ii_msgs[4]; extern const char *ext_msgs[32]; extern const char *htlink_msgs[8]; +#ifdef CONFIG_EDAC_DEBUG +#define NUM_DBG_ATTRS 9 +#else +#define NUM_DBG_ATTRS 0 +#endif + +#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION +#define NUM_INJ_ATTRS 5 +#else +#define NUM_INJ_ATTRS 0 +#endif + +extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS], + amd64_inj_attrs[NUM_INJ_ATTRS]; + /* * Each of the PCI Device IDs types have their own set of hardware accessor * functions and per device encoding/decoding logic. -- cgit v1.2.3-18-g5258 From 3d373290450b10933dad7c387c42179f54417009 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 20 May 2009 20:18:46 +0200 Subject: amd64_edac: do not enable module by default While at it, fix a link failure when !K8_NB. Acked-by: Doug Thompson Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Borislav Petkov --- drivers/edac/Kconfig | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 3dc650a7422..eff363d727e 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -60,11 +60,10 @@ config EDAC_MM_EDAC config EDAC_AMD64 tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h" - depends on EDAC_MM_EDAC && X86 && PCI - default m + depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI help - Support for error detection and correction on the AMD 64 - Families of Memory Controllers (K8, F10h and F11h) + Support for error detection and correction on the AMD 64 + Families of Memory Controllers (K8, F10h and F11h) config EDAC_AMD64_ERROR_INJECTION bool "Sysfs Error Injection facilities" -- cgit v1.2.3-18-g5258 From 9456ffffcf3c2f8fafeb9dee45f1502209602253 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 20 May 2009 20:26:53 +0200 Subject: EDAC: do not enable modules by default Prevent EDAC compilation units from being built by default and let the user explicitly select the needed modules. Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Borislav Petkov --- drivers/edac/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index eff363d727e..ab4f3592a11 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -49,7 +49,6 @@ config EDAC_DEBUG_VERBOSE config EDAC_MM_EDAC tristate "Main Memory EDAC (Error Detection And Correction) reporting" - default y help Some systems are able to detect and correct errors in main memory. EDAC can report statistics on memory error -- cgit v1.2.3-18-g5258 From 4da646b7b52552f3b43eae27ffa5aa2c200f6db6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 8 Apr 2009 02:00:13 -0400 Subject: [libata] ahci: use less error-prone array initializers Also, remove unneeded prototype. Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6b91c26a463..cd832cb6949 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -313,7 +313,6 @@ static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static int ahci_port_resume(struct ata_port *ap); static void ahci_dev_config(struct ata_device *dev); -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); #ifdef CONFIG_PM @@ -404,14 +403,14 @@ static struct ata_port_operations ahci_sb600_ops = { #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { - /* board_ahci */ + [board_ahci] = { .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_vt8251 */ + [board_ahci_vt8251] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, @@ -419,7 +418,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, - /* board_ahci_ign_iferr */ + [board_ahci_ign_iferr] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, @@ -427,7 +426,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb600 */ + [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | @@ -437,7 +436,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mv */ + [board_ahci_mv] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), @@ -447,7 +446,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb700, for SB700 and SB800 */ + [board_ahci_sb700] = /* for SB700 and SB800 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, @@ -455,7 +454,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mcp65 */ + [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, @@ -463,7 +462,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_nopmp */ + [board_ahci_nopmp] = { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, -- cgit v1.2.3-18-g5258 From 2102d7497393e982bf38ffe8f5fd3d487104880d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 15 Feb 2009 23:30:38 +0400 Subject: libata-sff: avoid byte swapping in ata_sff_data_xfer() Handling of the trailing byte in ata_sff_data_xfer() is suboptimal bacause: - it always initializes the padding buffer to 0 which is not really needed in both the read and write cases; - it has to use memcpy() to transfer a single byte from/to the padding buffer; - it uses io{read|write}16() accessors which swap bytes on the big endian CPUs and so have to additionally convert the data from/to the little endian format instead of using io{read|write}16_rep() accessors which are not supposed to change the byte ordering. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index bb18415d3d6..bbbb1fab175 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -727,17 +727,23 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, else iowrite16_rep(data_addr, buf, words); - /* Transfer trailing 1 byte, if any. */ + /* Transfer trailing byte, if any. */ if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; + unsigned char pad[2]; + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + /* + * Use io*16_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - align_buf[0] = cpu_to_le16(ioread16(data_addr)); - memcpy(trailing_buf, align_buf, 1); + ioread16_rep(data_addr, pad, 1); + *buf = pad[0]; } else { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), data_addr); + pad[0] = *buf; + iowrite16_rep(data_addr, pad, 1); } words++; } -- cgit v1.2.3-18-g5258 From f35b5e7c066a41f60683d2689e52a1336479913b Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 15 Apr 2009 00:00:54 +0400 Subject: sata_sx4: speed up ECC initialization ECC initialization takes too long. It writes zeroes by portions of 4 byte, it takes more than 6 minutes on my machine to initialize 512Mb ECC DIMM module. Change portion to 128Kb - it significantly reduces initialization time. Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index eb05a3c82a9..bbcf970068a 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -193,6 +193,7 @@ enum { PDC_TIMER_MASK_INT, }; +#define ECC_ERASE_BUF_SZ (128 * 1024) struct pdc_port_priv { u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; @@ -1280,7 +1281,6 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) { int speed, size, length; u32 addr, spd0, pci_status; - u32 tmp = 0; u32 time_period = 0; u32 tcount = 0; u32 ticks = 0; @@ -1395,14 +1395,17 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { + void *buf; VPRINTK("Start ECC initialization\n"); addr = 0; length = size * 1024 * 1024; + buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL); while (addr < length) { - pdc20621_put_to_dimm(host, (void *) &tmp, addr, - sizeof(u32)); - addr += sizeof(u32); + pdc20621_put_to_dimm(host, buf, addr, + ECC_ERASE_BUF_SZ); + addr += ECC_ERASE_BUF_SZ; } + kfree(buf); VPRINTK("Finish ECC initialization\n"); } return 0; -- cgit v1.2.3-18-g5258 From 31f80112cc7e7ea4c220d6f62b0a7052754befb3 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Mon, 13 Apr 2009 22:57:28 -0600 Subject: sata_sil: enable 32-bit PIO 32-bit PIO seems to work fine on sata_sil hardware (tested on SiI3114) and is listed as OK in the Silicon Image datasheets. Enable it. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index e67ce8e5caa..030ec079b18 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = { }; static struct ata_port_operations sil_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &ata_bmdma32_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, .bmdma_setup = sil_bmdma_setup, -- cgit v1.2.3-18-g5258 From 437681800bdaa9feb58cf943dfbbd239c21d3705 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 20 May 2009 09:44:39 +0200 Subject: [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c9242301cfa..ca4d208ddf3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5031,7 +5031,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) { int nr_done = 0; u32 done_mask; - int i; done_mask = ap->qc_active ^ qc_active; @@ -5041,16 +5040,16 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) return -EINVAL; } - for (i = 0; i < ATA_MAX_QUEUE; i++) { + while (done_mask) { struct ata_queued_cmd *qc; + unsigned int tag = __ffs(done_mask); - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { + qc = ata_qc_from_tag(ap, tag); + if (qc) { ata_qc_complete(qc); nr_done++; } + done_mask &= ~(1 << tag); } return nr_done; -- cgit v1.2.3-18-g5258 From d50ce07d6fd8a422757a231f9d7293cbddeaec31 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 10:57:41 +0900 Subject: ahci: misc cleanups for EM stuff Make the following EM related cleanups. * Use msleep(1) instead of udelay(100) and reduce retry count to 5. * s/MAX_SLOTS/EM_MAX_SLOTS/, s/MAX_RETRY/EM_MAX_RETRY/ * Make EM constants enums as suggested by Jeff. Signed-off-by: Tejun Heo Acked-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cd832cb6949..2141a31f176 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -77,8 +77,6 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, ssize_t size); -#define MAX_SLOTS 8 -#define MAX_RETRY 15 enum { AHCI_PCI_BAR = 5, @@ -231,6 +229,10 @@ enum { ICH_MAP = 0x90, /* ICH MAP register */ + /* em constants */ + EM_MAX_SLOTS = 8, + EM_MAX_RETRY = 5, + /* em_ctl bits */ EM_CTL_RST = (1 << 9), /* Reset */ EM_CTL_TM = (1 << 8), /* Transmit Message */ @@ -282,8 +284,8 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ - struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info - * per PM slot */ + /* enclosure management info per PM slot */ + struct ahci_em_priv em_priv[EM_MAX_SLOTS]; }; static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); @@ -1140,12 +1142,12 @@ static void ahci_start_port(struct ata_port *ap) emp = &pp->em_priv[link->pmp]; /* EM Transmit bit maybe busy during init */ - for (i = 0; i < MAX_RETRY; i++) { + for (i = 0; i < EM_MAX_RETRY; i++) { rc = ahci_transmit_led_message(ap, emp->led_state, 4); if (rc == -EBUSY) - udelay(100); + msleep(1); else break; } @@ -1339,7 +1341,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; @@ -1407,7 +1409,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; -- cgit v1.2.3-18-g5258 From 347979a034539ab20f3bc0c30ac0ccd3c4fd4c2e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:10:08 +0100 Subject: ata_piix: Turn on hotplugging support for older chips We can't do this for the later ones as they have all sorts of magic boot time stuff that needs reviewing and the like. However we can do it for the older ones and it turns out we need to as some IBM docking stations have a second PIIX series device in them and without this change you can't use it very well Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 1aeb7082b0c..716e369f39b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1509,8 +1509,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* no hotplugging support (FIXME) */ - if (!in_module_init) + /* no hotplugging support for later devices (FIXME) */ + if (!in_module_init && ent->driver_data >= ich5_sata) return -ENODEV; if (piix_broken_system_poweroff(pdev)) { -- cgit v1.2.3-18-g5258 From 7654db1a9256d746ae4d229ba675f616a5d5e1a1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:10:17 +0100 Subject: ata_piix: Remove stale comment Combined mode pci quirk hacks went away - so the table to keep in sync no longer exists. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 716e369f39b..6e165bf91d6 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -223,10 +223,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - /* NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - + /* SATA ports */ + /* 82801EB (ICH5) */ { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, /* 82801EB (ICH5) */ -- cgit v1.2.3-18-g5258 From 58a09b38cfcd700b796ea07ae3d2e0efbb28b561 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Wed, 27 May 2009 15:04:43 +0800 Subject: [libata] ahci: Restore SB600 SATA controller 64 bit DMA Community reported one SB600 SATA issue(BZ #9412), which led to 64 bit DMA disablement for all SB600 revisions by driver maintainers with commits c7a42156d99bcea7f8173ba7a6034bbaa2ecb77c and 4cde32fc4b32e96a99063af3183acdfd54c563f0. But the root cause is ASUS M2A-VM system BIOS bug in old revisions like 0901, while forcing into 32bit DMA happens to work as workaround. Now it's time to withdraw 4cde32fc4b32e96a99063af3183acdfd54c563f0 so as to restore the SB600 SATA 64bit DMA capability. This patch is also adding the workaround for M2A-VM old BIOS revisions, but users are suggested to upgrade their system BIOS to the latest one if they meet this issue. Signed-off-by: Shane Huang Cc: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 52 +++++++++++++++++++++++++++++++++++++++++++-- drivers/firmware/dmi_scan.c | 1 + 2 files changed, 51 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2141a31f176..15a23031833 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -431,8 +431,7 @@ static const struct ata_port_info ahci_port_info[] = { [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255), + AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, @@ -2585,6 +2584,51 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +/* + * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older + * BIOS. The oldest version known to be broken is 0901 and working is + * 1501 which was released on 2007-10-26. Force 32bit DMA on anything + * older than 1501. Please read bko#9412 for more info. + */ +static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "ASUS M2A-VM", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"), + }, + }, + { } + }; + const char *cutoff_mmdd = "10/26"; + const char *date; + int year; + + if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) || + !dmi_check_system(sysids)) + return false; + + /* + * Argh.... both version and date are free form strings. + * Let's hope they're using the same date format across + * different versions. + */ + date = dmi_get_system_info(DMI_BIOS_DATE); + year = dmi_get_year(DMI_BIOS_DATE); + if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' && + (year > 2007 || + (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0))) + return false; + + dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, " + "forcing 32bit DMA, update BIOS\n"); + + return true; +} + static bool ahci_broken_system_poweroff(struct pci_dev *pdev) { static const struct dmi_system_id broken_systems[] = { @@ -2745,6 +2789,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + /* apply ASUS M2A_VM quirk */ + if (ahci_asus_m2a_vm_32bit_only(pdev)) + hpriv->flags |= AHCI_HFLAG_32BIT_ONLY; + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) pci_enable_msi(pdev); diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 5f1b5400d96..24c84ae8152 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -596,6 +596,7 @@ int dmi_get_year(int field) return year; } +EXPORT_SYMBOL(dmi_get_year); /** * dmi_walk - Walk the DMI table and get called back for every record -- cgit v1.2.3-18-g5258 From 7f4774b38ee6270bbc6c3015cb3fa6c415ffb340 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 10 Jun 2009 16:29:07 +0900 Subject: sata_nv: use hardreset only for post-boot probing When I thought it was finally defeated, it came back with vengeance. The failure cases are ever more convoluted. Now there is a single combination which fails boot probing - MCP5x + Intel SSD and there are two hotplug failure reports on different flavors where softreset fails to bring up the device. Through the many bug reports after the switch to hardreset, the following patterns emerged. - Softreset during boot always works. - Hardreset during boot sometimes fails to bring up the link on certain comibnations and device signature acquisition is unreliable. - Hardreset is often necessary after hotplug. It looks like the old behavior of preferring softreset was somehow pretty close to the working reset protocol although it could have lost a device during phy error handling by issuing hardreset. This patch implements nv_hardreset() which kicks in only for post-boot (!LOADING) device probing resets. This should be able to work around all known problem cases. This isn't perfect but given the various hardreset quirks on these controllers, I think this is as good as it can get. Tested on mcp5x (swncq), nf3 and ck804 for all both boot, warm and hot probing cases. Kudos to all the bug reporters and their painful hours with these damn controllers. ;-) Signed-off-by: Tejun Heo Cc: Robert Hancock Reported-by: David Lang Reported-by: Samo Vodopivec Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 131 +++++++++++++++++++++++++++++++------------------- 1 file changed, 81 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6cda12ba812..b2d11f300c3 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,8 +305,8 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); @@ -406,49 +406,82 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_common_ops = { +/* + * NV SATA controllers have various different problems with hardreset + * protocol depending on the specific controller and device. + * + * GENERIC: + * + * bko11195 reports that link doesn't come online after hardreset on + * generic nv's and there have been several other similar reports on + * linux-ide. + * + * bko12351#c23 reports that warmplug on MCP61 doesn't work with + * softreset. + * + * NF2/3: + * + * bko3352 reports nf2/3 controllers can't determine device signature + * reliably after hardreset. The following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * bko12176 reports that hardreset fails to bring up the link during + * boot on nf2. + * + * CK804: + * + * For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port + * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg + * FIS in somewhat undeterministic way. + * + * SWNCQ: + * + * bko12351 reports that when SWNCQ is enabled, for hotplug to work, + * hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. + * + * bko12703 reports that boot probing fails for intel SSD with + * hardreset. Link fails to come online. Softreset works fine. + * + * The failures are varied but the following patterns seem true for + * all flavors. + * + * - Softreset during boot always works. + * + * - Hardreset during boot sometimes fails to bring up the link on + * certain comibnations and device signature acquisition is + * unreliable. + * + * - Hardreset is often necessary after hotplug. + * + * So, preferring softreset for boot probing and error handling (as + * hardreset might bring down the link) but using hardreset for + * post-boot probing should work around the above issues in most + * cases. Define nv_hardreset() which only kicks in for post-boot + * probing and use it for all variants. + */ +static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, + .hardreset = nv_hardreset, }; -/* OSDL bz11195 reports that link doesn't come online after hardreset - * on generic nv's and there have been several other similar reports - * on linux-ide. Disable hardreset for generic nv's. - */ -static struct ata_port_operations nv_generic_ops = { - .inherits = &nv_common_ops, - .hardreset = ATA_OP_NULL, -}; - -/* nf2 is ripe with hardreset related problems. - * - * kernel bz#3352 reports nf2/3 controllers can't determine device - * signature reliably. The following thread reports detection failure - * on cold boot with the standard debouncing timing. - * - * http://thread.gmane.org/gmane.linux.ide/34098 - * - * And bz#12176 reports that hardreset simply doesn't work on nf2. - * Give up on it and just don't do hardreset. - */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; -/* For initial probing after boot and hot plugging, hardreset mostly - * works fine on CK804 but curiously, reprobing on the initial port by - * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS - * in somewhat undeterministic way. Use noclassify hardreset. - */ static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, - .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -476,19 +509,8 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to - * work, hardreset should be used and hardreset can't report proper - * signature, which suggests that mcp5x is closer to nf2 as long as - * reset quirkiness is concerned. Define separate ops for mcp5x with - * nv_noclassify_hardreset(). - */ -static struct ata_port_operations nv_mcp5x_ops = { - .inherits = &nv_common_ops, - .hardreset = nv_noclassify_hardreset, -}; - static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_mcp5x_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -557,7 +579,7 @@ static const struct ata_port_info nv_port_info[] = { .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_mcp5x_ops, + .port_ops = &nv_generic_ops, .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), }, /* SWNCQ */ @@ -1559,15 +1581,24 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - bool online; - int rc; + struct ata_eh_context *ehc = &link->eh_context; - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; + /* Do hardreset iff it's post-boot probing, please read the + * comment above port ops for details. + */ + if (!(link->ap->pflags & ATA_PFLAG_LOADING) && + !ata_dev_enabled(link->device)) + sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + NULL, NULL); + else if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, + "nv: skipping hardreset on occupied port\n"); + + /* device signature acquisition is unreliable */ + return -EAGAIN; } static void nv_nf2_freeze(struct ata_port *ap) -- cgit v1.2.3-18-g5258 From 517d3cc15b36392e518abab6bacbb72089658313 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 13 May 2009 15:02:42 +0100 Subject: [libata] ata_piix: Enable parallel scan This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. Signed-off-by: Arjan van de Ven Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 6e165bf91d6..d0a14cf2bd7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1589,6 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->ports[1]->mwdma_mask = 0; host->ports[1]->udma_mask = 0; } + host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht); -- cgit v1.2.3-18-g5258 From 1adbee50fd6fce5af4feb34d2db93cfe4d2066a4 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 10 Jun 2009 12:57:08 -0700 Subject: ramdisk: remove long-deprecated "ramdisk=" boot-time parameter The "ramdisk" parameter was removed from the defunct rd.c file quite some time ago, in favour of the more specific "ramdisk_size" parameter so, for consistency, the same should be done here. Signed-off-by: Robert P. J. Day Acked-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/brd.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 5f7e64ba87e..4bf8705b3ac 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -407,12 +407,7 @@ static int __init ramdisk_size(char *str) rd_size = simple_strtol(str, NULL, 0); return 1; } -static int __init ramdisk_size2(char *str) -{ - return ramdisk_size(str); -} -__setup("ramdisk=", ramdisk_size); -__setup("ramdisk_size=", ramdisk_size2); +__setup("ramdisk_size=", ramdisk_size); #endif /* -- cgit v1.2.3-18-g5258 From 5e50b9ef975219304cc91d601530994861585bfe Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Wed, 10 Jun 2009 12:57:09 -0700 Subject: floppy: fix hibernation Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary Cc: "Rafael J. Wysocki" Cc: Ingo Molnar Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 90877fee0ee..862b40c9018 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4148,6 +4148,24 @@ static void floppy_device_release(struct device *dev) { } +static int floppy_resume(struct platform_device *dev) +{ + int fdc; + + for (fdc = 0; fdc < N_FDC; fdc++) + if (FDCS->address != -1) + user_reset_fdc(-1, FD_RESET_ALWAYS, 0); + + return 0; +} + +static struct platform_driver floppy_driver = { + .resume = floppy_resume, + .driver = { + .name = "floppy", + }, +}; + static struct platform_device floppy_device[N_DRIVE]; static struct kobject *floppy_find(dev_t dev, int *part, void *data) @@ -4196,10 +4214,14 @@ static int __init floppy_init(void) if (err) goto out_put_disk; + err = platform_driver_register(&floppy_driver); + if (err) + goto out_unreg_blkdev; + floppy_queue = blk_init_queue(do_fd_request, &floppy_lock); if (!floppy_queue) { err = -ENOMEM; - goto out_unreg_blkdev; + goto out_unreg_driver; } blk_queue_max_sectors(floppy_queue, 64); @@ -4346,6 +4368,8 @@ out_flush_work: out_unreg_region: blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); blk_cleanup_queue(floppy_queue); +out_unreg_driver: + platform_driver_unregister(&floppy_driver); out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: @@ -4566,6 +4590,7 @@ static void __exit floppy_module_exit(void) blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256); unregister_blkdev(FLOPPY_MAJOR, "fd"); + platform_driver_unregister(&floppy_driver); for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); -- cgit v1.2.3-18-g5258 From 54ff328b46e58568c4b3350c2fa3223ef862e5a4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 11 Jun 2009 10:33:09 +0300 Subject: sh: Tie sparseirq in to Kconfig. Now that the dependent patches are merged, we are ready to enable sparseirq support. This simply adds the Kconfig option, and then converts from the _cpu to the _node allocation routines to follow the upstream sparseirq API changes. Signed-off-by: Paul Mundt --- drivers/sh/intc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c index caf06569404..d687a9b93d0 100644 --- a/drivers/sh/intc.c +++ b/drivers/sh/intc.c @@ -24,6 +24,7 @@ #include #include #include +#include #define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \ ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \ @@ -671,7 +672,7 @@ unsigned int intc_evt2irq(unsigned int vector) void __init register_intc_controller(struct intc_desc *desc) { - unsigned int i, k, smp, cpu = smp_processor_id(); + unsigned int i, k, smp; struct intc_desc_int *d; d = alloc_bootmem(sizeof(*d)); @@ -771,19 +772,16 @@ void __init register_intc_controller(struct intc_desc *desc) for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; unsigned int irq = evt2irq(vect->vect); -#ifdef CONFIG_SPARSE_IRQ struct irq_desc *irq_desc; -#endif + if (!vect->enum_id) continue; -#ifdef CONFIG_SPARSE_IRQ - irq_desc = irq_to_desc_alloc_cpu(irq, cpu); + irq_desc = irq_to_desc_alloc_node(irq, numa_node_id()); if (unlikely(!irq_desc)) { printk(KERN_INFO "can not get irq_desc for %d\n", irq); continue; } -#endif intc_register_irq(desc, d, vect->enum_id, irq); } -- cgit v1.2.3-18-g5258 From ace08c3c4403140e5ce82116c8f2acb38f58f61d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:20:38 +0100 Subject: tty:cyclades, load firmware even on Ze Ze needs firmware to be loaded as well as Zo. Move cyz_load_fw one level upper to achieve that. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 1fdb9f657d8..bde24583bcf 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5043,6 +5043,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; + nchan = 8; #ifdef CY_PCI_DEBUG if (mailbox == ZO_V1) { @@ -5065,15 +5066,11 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, */ if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) cy_writel(addr2 + ID_ADDRESS, 0L); - - retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval) - goto err_unmap; - /* This must be a Cyclades-8Zo/PCI. The extendable - version will have a different device_id and will - be allocated its maximum number of ports. */ - nchan = 8; } + + retval = cyz_load_fw(pdev, addr2, addr0, irq); + if (retval) + goto err_unmap; } if ((cy_next_channel + nchan) > NR_PORTS) { -- cgit v1.2.3-18-g5258 From eca1b592d600bb2b7d24b66e4106de1e751ae510 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:21:30 +0100 Subject: tty: cyclades, don't kill FW Don't reset the PLX chip after FW load, which effectively kills the FW, so that user had to boot manually. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index bde24583bcf..6d524391e99 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -4932,8 +4932,6 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | 0x00030800UL); - plx_init(pdev, irq, ctl_addr); - return 0; err_rel: release_firmware(fw); -- cgit v1.2.3-18-g5258 From 65a29f60e121ae5116ac1736b50a237bf2db3225 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:22:27 +0100 Subject: tty: cyclades, remove spurious check in ISR No need to check if dev_id is NULL, it never is. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 6d524391e99..ccf68a9e24b 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1737,14 +1737,6 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) { struct cyclades_card *cinfo = dev_id; - if (unlikely(cinfo == NULL)) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n", - irq); -#endif - return IRQ_NONE; /* spurious interrupt */ - } - if (unlikely(!ISZLOADED(*cinfo))) { #ifdef CY_DEBUG_INTERRUPTS printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " -- cgit v1.2.3-18-g5258 From fcc8ac1825d3d0fb81f73bc1a80ebc863168bb56 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:24:17 +0100 Subject: tty: Add carrier processing on close to the tty_port core Some drivers implement this internally, others miss it out. Push the behaviour into the core code as that way everyone will do it consistently. Update the dtr rts method to raise or lower depending upon flags. Having a single method in this style fits most of the implementations more cleanly than two funtions. We need this in place before we tackle the USB side Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/epca.c | 4 ++-- drivers/char/isicom.c | 19 +++++++++++++------ drivers/char/istallion.c | 8 ++++---- drivers/char/mxser.c | 12 ++++++++---- drivers/char/pcmcia/synclink_cs.c | 11 +++++++---- drivers/char/rocket.c | 13 +++++++++---- drivers/char/stallion.c | 6 +++--- drivers/char/synclink.c | 9 ++++++--- drivers/char/synclink_gt.c | 9 ++++++--- drivers/char/synclinkmp.c | 9 ++++++--- drivers/char/tty_port.c | 27 +++++++++++++++++++++++---- 11 files changed, 87 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/char/epca.c b/drivers/char/epca.c index af7c13ca949..8797b774235 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -745,7 +745,7 @@ static int epca_carrier_raised(struct tty_port *port) return 0; } -static void epca_raise_dtr_rts(struct tty_port *port) +static void epca_dtr_rts(struct tty_port *port, int onoff) { } @@ -925,7 +925,7 @@ static const struct tty_operations pc_ops = { static const struct tty_port_operations epca_port_ops = { .carrier_raised = epca_carrier_raised, - .raise_dtr_rts = epca_raise_dtr_rts, + .dtr_rts = epca_dtr_rts, }; static int info_open(struct tty_struct *tty, struct file *filp) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index a59eac584d1..4d745a89504 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -329,7 +329,7 @@ static inline void drop_rts(struct isi_port *port) /* card->lock MUST NOT be held */ -static void isicom_raise_dtr_rts(struct tty_port *port) +static void isicom_dtr_rts(struct tty_port *port, int on) { struct isi_port *ip = container_of(port, struct isi_port, port); struct isi_board *card = ip->card; @@ -339,10 +339,17 @@ static void isicom_raise_dtr_rts(struct tty_port *port) if (!lock_card(card)) return; - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0f04, base); - InterruptTheCard(base); - ip->status |= (ISI_DTR | ISI_RTS); + if (on) { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0f04, base); + InterruptTheCard(base); + ip->status |= (ISI_DTR | ISI_RTS); + } else { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0C04, base); + InterruptTheCard(base); + ip->status &= ~(ISI_DTR | ISI_RTS); + } unlock_card(card); } @@ -1339,7 +1346,7 @@ static const struct tty_operations isicom_ops = { static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, - .raise_dtr_rts = isicom_raise_dtr_rts, + .dtr_rts = isicom_dtr_rts, }; static int __devinit reset_card(struct pci_dev *pdev, diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index fff19f7e29d..e18800c400b 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -1140,14 +1140,14 @@ static int stli_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stli_raise_dtr_rts(struct tty_port *port) +static void stli_dtr_rts(struct tty_port *port, int on) { struct stliport *portp = container_of(port, struct stliport, port); struct stlibrd *brdp = stli_brds[portp->brdnr]; - stli_mkasysigs(&portp->asig, 1, 1); + stli_mkasysigs(&portp->asig, on, on); if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, sizeof(asysigs_t), 0) < 0) - printk(KERN_WARNING "istallion: dtr raise failed.\n"); + printk(KERN_WARNING "istallion: dtr set failed.\n"); } @@ -4417,7 +4417,7 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, - .raise_dtr_rts = stli_raise_dtr_rts, + .dtr_rts = stli_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 13f8871e5b2..9533f43a30b 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -547,14 +547,18 @@ static int mxser_carrier_raised(struct tty_port *port) return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; } -static void mxser_raise_dtr_rts(struct tty_port *port) +static void mxser_dtr_rts(struct tty_port *port, int on) { struct mxser_port *mp = container_of(port, struct mxser_port, port); unsigned long flags; spin_lock_irqsave(&mp->slock, flags); - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); spin_unlock_irqrestore(&mp->slock, flags); } @@ -2356,7 +2360,7 @@ static const struct tty_operations mxser_ops = { struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, - .raise_dtr_rts = mxser_raise_dtr_rts, + .dtr_rts = mxser_dtr_rts, }; /* diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 19d79fc5446..77b36488922 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -383,7 +383,7 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); static int carrier_raised(struct tty_port *port); -static void raise_dtr_rts(struct tty_port *port); +static void dtr_rts(struct tty_port *port, int onoff); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -513,7 +513,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, static const struct tty_port_operations mgslpc_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts + .dtr_rts = dtr_rts }; static int mgslpc_probe(struct pcmcia_device *link) @@ -2528,13 +2528,16 @@ static int carrier_raised(struct tty_port *port) return 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int onoff) { MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (onoff) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR; set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index f59fc5cea06..7399188049d 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -872,11 +872,16 @@ static int carrier_raised(struct tty_port *port) return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct r_port *info = container_of(port, struct r_port, port); - sSetDTR(&info->channel); - sSetRTS(&info->channel); + if (on) { + sSetDTR(&info->channel); + sSetRTS(&info->channel); + } else { + sClrDTR(&info->channel); + sClrRTS(&info->channel); + } } /* @@ -2250,7 +2255,7 @@ static const struct tty_operations rocket_ops = { static const struct tty_port_operations rocket_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 2ad813a801d..53e504f41b2 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -772,11 +772,11 @@ static int stl_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stl_raise_dtr_rts(struct tty_port *port) +static void stl_dtr_rts(struct tty_port *port, int on) { struct stlport *portp = container_of(port, struct stlport, port); /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); + stl_setsignals(portp, on, on); } /*****************************************************************************/ @@ -2547,7 +2547,7 @@ static const struct tty_operations stl_ops = { static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, - .raise_dtr_rts = stl_raise_dtr_rts, + .dtr_rts = stl_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index afd0b26ca05..afded3a2379 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -3247,13 +3247,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); unsigned long flags; spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); usc_set_serial_signals(info); spin_unlock_irqrestore(&info->irq_spinlock,flags); } @@ -4258,7 +4261,7 @@ static void mgsl_add_device( struct mgsl_struct *info ) static const struct tty_port_operations mgsl_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 5e256494686..67986ea0d47 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -3099,13 +3099,16 @@ static int carrier_raised(struct tty_port *port) return (info->signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { unsigned long flags; struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3419,7 +3422,7 @@ static void add_device(struct slgt_info *info) static const struct tty_port_operations slgt_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 26de60efe4b..6f727e3c53a 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -3277,13 +3277,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { SLMP_INFO *info = container_of(port, SLMP_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3746,7 +3749,7 @@ static void add_device(SLMP_INFO *info) static const struct tty_port_operations port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* Allocate and initialize a device instance structure diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 9b8004c7268..926d4a5593f 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -137,7 +137,7 @@ int tty_port_carrier_raised(struct tty_port *port) EXPORT_SYMBOL(tty_port_carrier_raised); /** - * tty_port_raise_dtr_rts - Riase DTR/RTS + * tty_port_raise_dtr_rts - Raise DTR/RTS * @port: tty port * * Wrapper for the DTR/RTS raise logic. For the moment this is used @@ -147,11 +147,27 @@ EXPORT_SYMBOL(tty_port_carrier_raised); void tty_port_raise_dtr_rts(struct tty_port *port) { - if (port->ops->raise_dtr_rts) - port->ops->raise_dtr_rts(port); + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 1); } EXPORT_SYMBOL(tty_port_raise_dtr_rts); +/** + * tty_port_lower_dtr_rts - Lower DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_lower_dtr_rts(struct tty_port *port) +{ + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 0); +} +EXPORT_SYMBOL(tty_port_lower_dtr_rts); + /** * tty_port_block_til_ready - Waiting logic for tty open * @port: the tty port being opened @@ -167,7 +183,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts); * - port flags and counts * * The passed tty_port must implement the carrier_raised method if it can - * do carrier detect and the raise_dtr_rts method if it supports software + * do carrier detect and the dtr_rts method if it supports software * management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ @@ -302,6 +318,9 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) tty_ldisc_flush(tty); + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(port); + spin_lock_irqsave(&port->lock, flags); tty->closing = 0; -- cgit v1.2.3-18-g5258 From 1ec739be75a6cb961a46ba0b1982d0edb7f27558 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:25:25 +0100 Subject: tty: Implement a drain delay in the tty port We need this for devices that cannot flush and wait, but which do not order data and modem events. Without it we will hang up before all the data clears the hardware. Needed for the USB changes. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 926d4a5593f..4d08b6d27c2 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -308,6 +308,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f if (port->flags & ASYNC_INITIALIZED && port->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, port->closing_wait); + if (port->drain_delay) { + unsigned int bps = tty_get_baud_rate(tty); + long timeout; + + if (bps > 1200) + timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps, + HZ / 10); + else + timeout = 2 * HZ; + schedule_timeout_interruptible(timeout); + } return 1; } EXPORT_SYMBOL(tty_port_close_start); -- cgit v1.2.3-18-g5258 From 335f8514f200e63d689113d29cb7253a5c282967 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:26:29 +0100 Subject: tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/belkin_sa.c | 6 +- drivers/usb/serial/ch341.c | 46 ++++++----- drivers/usb/serial/console.c | 6 +- drivers/usb/serial/cp210x.c | 6 +- drivers/usb/serial/cyberjack.c | 6 +- drivers/usb/serial/cypress_m8.c | 81 ++++++------------- drivers/usb/serial/digi_acceleport.c | 75 +++++------------- drivers/usb/serial/empeg.c | 6 +- drivers/usb/serial/ftdi_sio.c | 50 ++++++------ drivers/usb/serial/garmin_gps.c | 3 +- drivers/usb/serial/generic.c | 3 +- drivers/usb/serial/io_edgeport.c | 10 +-- drivers/usb/serial/io_ti.c | 3 +- drivers/usb/serial/ipaq.c | 6 +- drivers/usb/serial/ipw.c | 18 ++--- drivers/usb/serial/ir-usb.c | 6 +- drivers/usb/serial/iuu_phoenix.c | 25 +----- drivers/usb/serial/keyspan.c | 13 ++- drivers/usb/serial/keyspan.h | 8 +- drivers/usb/serial/keyspan_pda.c | 48 ++++++++---- drivers/usb/serial/kl5kusb105.c | 6 +- drivers/usb/serial/kobil_sct.c | 9 +-- drivers/usb/serial/mct_u232.c | 37 ++++----- drivers/usb/serial/mos7720.c | 3 +- drivers/usb/serial/mos7840.c | 48 +----------- drivers/usb/serial/navman.c | 3 +- drivers/usb/serial/omninet.c | 6 +- drivers/usb/serial/opticon.c | 3 +- drivers/usb/serial/option.c | 68 ++++++++-------- drivers/usb/serial/oti6858.c | 57 ++------------ drivers/usb/serial/pl2303.c | 79 ++++++++----------- drivers/usb/serial/sierra.c | 97 ++++++++++------------- drivers/usb/serial/spcp8x5.c | 85 ++++++++------------ drivers/usb/serial/symbolserial.c | 3 +- drivers/usb/serial/ti_usb_3410_5052.c | 6 +- drivers/usb/serial/usb-serial.c | 144 +++++++++++++++++++++++----------- drivers/usb/serial/visor.c | 6 +- drivers/usb/serial/whiteheat.c | 33 +------- 38 files changed, 461 insertions(+), 657 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index b7eacad4d48..2bfd6dd85b5 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -93,8 +93,7 @@ static int belkin_sa_startup(struct usb_serial *serial); static void belkin_sa_shutdown(struct usb_serial *serial); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void belkin_sa_close(struct usb_serial_port *port); static void belkin_sa_read_int_callback(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); @@ -244,8 +243,7 @@ exit: } /* belkin_sa_open */ -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void belkin_sa_close(struct usb_serial_port *port) { dbg("%s port %d", __func__, port->number); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ab4cc277aa6..2830766f5b3 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -262,13 +262,33 @@ error: kfree(priv); return r; } -static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int ch341_carrier_raised(struct usb_serial_port *port) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & CH341_BIT_DCD) + return 1; + return 0; +} + +static void ch341_dtr_rts(struct usb_serial_port *port, int on) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; + dbg("%s - port %d", __func__, port->number); + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR; + else + priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); + wake_up_interruptible(&priv->delta_msr_wait); +} + +static void ch341_close(struct usb_serial_port *port) +{ dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ @@ -276,18 +296,6 @@ static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - ch341_set_handshake(port->serial->dev, 0); - } - } - wake_up_interruptible(&priv->delta_msr_wait); } @@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r) @@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, r); - ch341_close(tty, port, NULL); + ch341_close(port); return -EPROTO; } @@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty, dbg("ch341_set_termios()"); - if (!tty || !tty->termios) - return; - baud_rate = tty_get_baud_rate(tty); priv->baud_rate = baud_rate; @@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = { .usb_driver = &ch341_driver, .num_ports = 1, .open = ch341_open, + .dtr_rts = ch341_dtr_rts, + .carrier_raised = ch341_carrier_raised, .close = ch341_close, .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 19e24045b13..247b61bfb7f 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options) kfree(tty); } } - + /* So we know not to kill the hardware on a hangup on this + port. We have also bumped the use count by one so it won't go + idle */ port->console = 1; retval = 0; @@ -182,7 +184,7 @@ free_tty: kfree(tty); reset_open_count: port->port.count = 0; -goto out; + goto out; } static void usb_console_write(struct console *co, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e8d5133ce9c..d9f586dc6ec 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -36,8 +36,7 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *, struct file *); static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct tty_struct *, struct usb_serial_port *, - struct file*); +static void cp2101_close(struct usb_serial_port *); static void cp2101_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp2101_get_termios_port(struct usb_serial_port *port, @@ -398,8 +397,7 @@ static void cp2101_cleanup(struct usb_serial_port *port) } } -static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void cp2101_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index dd501bb63ed..933ba913e66 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_shutdown(struct usb_serial *serial); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cyberjack_close(struct usb_serial_port *port); static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int cyberjack_write_room(struct tty_struct *tty); @@ -185,8 +184,7 @@ static int cyberjack_open(struct tty_struct *tty, return result; } -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cyberjack_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e568710b263..669f9384853 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -174,8 +174,8 @@ static int cypress_ca42v2_startup(struct usb_serial *serial); static void cypress_shutdown(struct usb_serial *serial); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cypress_close(struct usb_serial_port *port); +static void cypress_dtr_rts(struct usb_serial_port *port, int on); static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); @@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* raise both lines and set termios */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = CONTROL_DTR | CONTROL_RTS; - priv->cmd_ctrl = 1; - spin_unlock_irqrestore(&priv->lock, flags); + /* Set termios */ result = cypress_write(tty, port, NULL, 0); if (result) { @@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty, __func__, result); cypress_set_dead(port); } - + port->port.drain_delay = 256; return result; } /* cypress_open */ +static void cypress_dtr_rts(struct usb_serial_port *port, int on) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + /* drop dtr and rts */ + priv = usb_get_serial_port_data(port); + spin_lock_irq(&priv->lock); + if (on == 0) + priv->line_control = 0; + else + priv->line_control = CONTROL_DTR | CONTROL_RTS; + priv->cmd_ctrl = 1; + spin_unlock_irq(&priv->lock); + cypress_write(NULL, port, NULL, 0); +} -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cypress_close(struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from buffer */ - spin_lock_irq(&priv->lock); - timeout = CYPRESS_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (cypress_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - /* without mutex, allowed due to harmless failure mode */ - || port->serial->disconnected) - break; - spin_unlock_irq(&priv->lock); - timeout = schedule_timeout(timeout); - spin_lock_irq(&priv->lock); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - cypress_buf_clear(priv->buf); - spin_unlock_irq(&priv->lock); - /* writing is potentially harmful, lock must be taken */ mutex_lock(&port->serial->disc_mutex); if (port->serial->disconnected) { mutex_unlock(&port->serial->disc_mutex); return; } - /* wait for characters to drain from device */ - if (tty) { - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ * 2560) / bps, HZ / 10); - else - timeout = 2 * HZ; - schedule_timeout_interruptible(timeout); - } - + cypress_buf_clear(priv->buf); dbg("%s - stopping urbs", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop dtr and rts */ - priv = usb_get_serial_port_data(port); - spin_lock_irq(&priv->lock); - priv->line_control = 0; - priv->cmd_ctrl = 1; - spin_unlock_irq(&priv->lock); - cypress_write(tty, port, NULL, 0); - } - } if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 38ba4ea8b6b..30f5140eff0 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -422,7 +422,6 @@ struct digi_port { int dp_throttled; int dp_throttle_restart; wait_queue_head_t dp_flush_wait; - int dp_in_close; /* close in progress */ wait_queue_head_t dp_close_wait; /* wait queue for close */ struct work_struct dp_wakeup_work; struct usb_serial_port *dp_port; @@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void digi_close(struct usb_serial_port *port); +static int digi_carrier_raised(struct usb_serial_port *port); +static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_shutdown(struct usb_serial *serial); @@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .num_ports = 3, .open = digi_open, .close = digi_close, + .dtr_rts = digi_dtr_rts, + .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty) } +static void digi_dtr_rts(struct usb_serial_port *port, int on) +{ + /* Adjust DTR and RTS */ + digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); +} + +static int digi_carrier_raised(struct usb_serial_port *port) +{ + struct digi_port *priv = usb_get_serial_port_data(port); + if (priv->dp_modem_signals & TIOCM_CD) + return 1; + return 0; +} static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - unsigned long flags = 0; dbg("digi_open: TOP: port=%d, open_count=%d", priv->dp_port_num, port->port.count); @@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, if (digi_startup_device(port->serial) != 0) return -ENXIO; - spin_lock_irqsave(&priv->dp_port_lock, flags); - - /* don't wait on a close in progress for non-blocking opens */ - if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - return -EAGAIN; - } - - /* wait for a close in progress to finish */ - while (priv->dp_in_close) { - cond_wait_interruptible_timeout_irqrestore( - &priv->dp_close_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags); - if (signal_pending(current)) - return -EINTR; - spin_lock_irqsave(&priv->dp_port_lock, flags); - } - - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - /* read modem signals automatically whenever they change */ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; buf[1] = priv->dp_port_num; @@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, not_termios.c_iflag = ~tty->termios->c_iflag; digi_set_termios(tty, port, ¬_termios); } - - /* set DTR and RTS */ - digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1); - return 0; } -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void digi_close(struct usb_serial_port *port) { DEFINE_WAIT(wait); int ret; @@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, if (port->serial->disconnected) goto exit; - /* do cleanup only after final close on this port */ - spin_lock_irq(&priv->dp_port_lock); - priv->dp_in_close = 1; - spin_unlock_irq(&priv->dp_port_lock); - - /* tell line discipline to process only XON/XOFF */ - tty->closing = 1; - - /* wait for output to drain */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT); - - /* flush driver and line discipline buffers */ - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - if (port->serial->dev) { - /* wait for transmit idle */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - /* drop DTR and RTS */ - digi_set_modem_signals(port, 0, 0); + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); /* disable input flow control */ buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; @@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, /* shutdown any outstanding bulk writes */ usb_kill_urb(port->write_urb); } - tty->closing = 0; exit: spin_lock_irq(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - priv->dp_in_close = 0; wake_up_interruptible(&priv->dp_close_wait); spin_unlock_irq(&priv->dp_port_lock); mutex_unlock(&port->serial->disc_mutex); @@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial) priv->dp_throttled = 0; priv->dp_throttle_restart = 0; init_waitqueue_head(&priv->dp_flush_wait); - priv->dp_in_close = 0; init_waitqueue_head(&priv->dp_close_wait); INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); priv->dp_port = serial->port[i]; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index c709ec474a8..2b141ccb0cd 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -81,8 +81,7 @@ static int debug; /* function prototypes for an empeg-car player */ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void empeg_close(struct usb_serial_port *port); static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, } -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void empeg_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9fcdaedf38..d9d87111f9a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -719,8 +719,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ftdi_close(struct usb_serial_port *port); +static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int ftdi_write_room(struct tty_struct *tty); @@ -758,6 +758,7 @@ static struct usb_serial_driver ftdi_sio_device = { .port_remove = ftdi_sio_port_remove, .open = ftdi_open, .close = ftdi_close, + .dtr_rts = ftdi_dtr_rts, .throttle = ftdi_throttle, .unthrottle = ftdi_unthrottle, .write = ftdi_write, @@ -1558,6 +1559,30 @@ static int ftdi_open(struct tty_struct *tty, } /* ftdi_open */ +static void ftdi_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char buf[1]; + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, buf, 0, + WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} /* * usbserial:__serial_close only calls ftdi_close if the point is open @@ -1567,31 +1592,12 @@ static int ftdi_open(struct tty_struct *tty, * */ -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ftdi_close(struct usb_serial_port *port) { /* ftdi_close */ - unsigned int c_cflag = tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; dbg("%s", __func__); - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* Disable flow control */ - if (usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, - WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "error from flowcontrol urb\n"); - } - - /* drop RTS and DTR */ - clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } /* Note change no line if hupcl is off */ - mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ cancel_delayed_work_sync(&priv->rx_work); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 586d30ff450..ee25a3fe3b0 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty, } -static void garmin_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void garmin_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 4cec9906ccf..be82ea95672 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) } EXPORT_SYMBOL_GPL(usb_serial_generic_resume); -void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +void usb_serial_generic_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); generic_cleanup(port); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index fb4a73d090f..53ef5996e33 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void edge_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void edge_close(struct usb_serial_port *port); static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int edge_write_room(struct tty_struct *tty); @@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->txfifo.fifo) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->write_urb) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) * edge_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 513b25e044c..eabf20eeb37 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2009,8 +2009,7 @@ release_es_lock: return status; } -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index cd62825a9ac..c610a99fa47 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -76,8 +76,7 @@ static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ipaq_close(struct usb_serial_port *port); static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static void ipaq_shutdown(struct usb_serial *serial); @@ -714,8 +713,7 @@ error: } -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipaq_close(struct usb_serial_port *port) { struct ipaq_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index da2a2b46644..29ad038b9c8 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty, return 0; } -static void ipw_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipw_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; int result; - if (tty_hung_up_p(filp)) { - dbg("%s: tty_hung_up_p ...", __func__); - return; - } - /*--1: drop the dtr */ dbg("%s:dropping dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRDTR, + on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, 0, NULL, 0, @@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty, result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRRTS, + on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, 0, NULL, 0, @@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty, if (result < 0) dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); +} +static void ipw_close(struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + int result; /*--3: purge */ dbg("%s:sending purge", __func__); @@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = { .num_ports = 1, .open = ipw_open, .close = ipw_close, + .dtr_rts = ipw_dtr_rts, .port_probe = ipw_probe, .port_remove = ipw_disconnect, .write = ipw_write, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 4e2cda93da5..66009b6b763 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -88,8 +88,7 @@ static int xbof = -1; static int ir_startup (struct usb_serial *serial); static int ir_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filep); -static void ir_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filep); +static void ir_close(struct usb_serial_port *port); static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void ir_write_bulk_callback (struct urb *urb); @@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty, return result; } -static void ir_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) +static void ir_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 4473d442b2a..bb572cee6ec 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ wait_queue_head_t delta_msr_wait; - u8 line_control; u8 line_status; u8 termios_initialized; int tiostatus; /* store IUART SIGNAL for tiocmget call */ @@ -946,19 +945,10 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } -static int set_control_lines(struct usb_device *dev, u8 value) -{ - return 0; -} - -static void iuu_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ struct usb_serial *serial; - struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; serial = port->serial; if (!serial) @@ -968,17 +958,6 @@ static void iuu_close(struct tty_struct *tty, iuu_uart_off(port); if (serial->dev) { - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } /* free writebuf */ /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); @@ -1154,7 +1133,7 @@ static int iuu_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - iuu_close(tty, port, NULL); + iuu_close(port); return -EPROTO; } else { dbg("%s - rxcmd OK", __func__); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 00daa8f7759..f1195a98f31 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb) usb_kill_urb(urb); } -static void keyspan_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = on; + p_priv->dtr_state = on; + keyspan_send_setup(port, 0); +} + +static void keyspan_close(struct usb_serial_port *port) { int i; struct usb_serial *serial = port->serial; @@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty, stop_urb(p_priv->out_urbs[i]); } } - tty_port_tty_set(&port->port, NULL); } /* download the firmware to a pre-renumeration device */ diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 38b4582e073..0d4569b6076 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -38,9 +38,8 @@ static int keyspan_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void keyspan_close (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); +static void keyspan_close (struct usb_serial_port *port); +static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); static void keyspan_shutdown (struct usb_serial *serial); static int keyspan_write_room (struct tty_struct *tty); @@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = { .num_ports = 1, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = { .num_ports = 2, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = { .num_ports = 4, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index bf1ae247da6..ab769dbea1b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty) } +static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_serial *serial = port->serial; + + if (serial->dev) { + if (on) + keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2)); + else + keyspan_pda_set_modem_info(serial, 0); + } +} + +static int keyspan_pda_carrier_raised(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + unsigned char modembits; + + /* If we can read the modem status and the DCD is low then + carrier is not raised yet */ + if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { + if (!(modembits & (1>>6))) + return 0; + } + /* Carrier raised, or we failed (eg disconnected) so + progress accordingly */ + return 1; +} + + static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { @@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty, priv->tx_room = room; priv->tx_throttled = room ? 0 : 1; - /* the normal serial device seems to always turn on DTR and RTS here, - so do the same */ - if (tty && (tty->termios->c_cflag & CBAUD)) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2)); - else - keyspan_pda_set_modem_info(serial, 0); - /*Start reading from the device*/ port->interrupt_in_urb->dev = serial->dev; rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); @@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty, error: return rc; } - - -static void keyspan_pda_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_pda_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; if (serial->dev) { - /* the normal serial device seems to always shut - off DTR and RTS now */ - if (tty->termios->c_cflag & HUPCL) - keyspan_pda_set_modem_info(serial, 0); - /* shutdown our bulk reads and writes */ usb_kill_urb(port->write_urb); usb_kill_urb(port->interrupt_in_urb); @@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = { .usb_driver = &keyspan_pda_driver, .id_table = id_table_std, .num_ports = 1, + .dtr_rts = keyspan_pda_dtr_rts, + .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index fcd9082f3e7..fa817c66b3e 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -76,8 +76,7 @@ static int klsi_105_startup(struct usb_serial *serial); static void klsi_105_shutdown(struct usb_serial *serial); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void klsi_105_close(struct usb_serial_port *port); static int klsi_105_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void klsi_105_write_bulk_callback(struct urb *urb); @@ -447,8 +446,7 @@ exit: } /* klsi_105_open */ -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void klsi_105_close(struct usb_serial_port *port) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int rc; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index c148544953b..6b570498287 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -72,8 +72,7 @@ static int kobil_startup(struct usb_serial *serial); static void kobil_shutdown(struct usb_serial *serial); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int kobil_write_room(struct tty_struct *tty); @@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { while (serial->port[i]->port.count > 0) - kobil_close(NULL, serial->port[i], NULL); + kobil_close(serial->port[i]); kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } @@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty, } -static void kobil_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void kobil_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); + /* FIXME: Add rts/dtr methods */ if (port->write_urb) { usb_kill_urb(port->write_urb); usb_free_urb(port->write_urb); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 82930a7d509..873795548fc 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -95,8 +95,8 @@ static int mct_u232_startup(struct usb_serial *serial); static void mct_u232_shutdown(struct usb_serial *serial); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void mct_u232_close(struct usb_serial_port *port); +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = { .num_ports = 1, .open = mct_u232_open, .close = mct_u232_close, + .dtr_rts = mct_u232_dtr_rts, .throttle = mct_u232_throttle, .unthrottle = mct_u232_unthrottle, .read_int_callback = mct_u232_read_int_callback, @@ -496,29 +497,29 @@ error: return retval; } /* mct_u232_open */ - -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) { - unsigned int c_cflag; unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); - dbg("%s port %d", __func__, port->number); - if (tty) { - c_cflag = tty->termios->c_cflag; - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* drop DTR and RTS */ - spin_lock_irq(&priv->lock); + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* drop DTR and RTS */ + spin_lock_irq(&priv->lock); + if (on) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - control_state = priv->control_state; - spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port->serial, control_state); - } - mutex_unlock(&port->serial->disc_mutex); + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + mct_u232_set_modem_ctrl(port->serial, control_state); } + mutex_unlock(&port->serial->disc_mutex); +} +static void mct_u232_close(struct usb_serial_port *port) +{ + dbg("%s port %d", __func__, port->number); if (port->serial->dev) { /* shutdown our urbs */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 24e3b5d4b4d..9e1a013ee7f 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) return chars; } -static void mos7720_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7720_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7720_port; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 84fb1dcd30d..10b78a37214 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) } -/************************************************************************ - * - * mos7840_block_until_tx_empty - * - * This function will block the close until one of the following: - * 1. TX count are 0 - * 2. The mos7840 has stopped - * 3. A timeout of 3 seconds without activity has expired - * - ************************************************************************/ -static void mos7840_block_until_tx_empty(struct tty_struct *tty, - struct moschip_port *mos7840_port) -{ - int timeout = HZ / 10; - int wait = 30; - int count; - - while (1) { - - count = mos7840_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) - return; - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&mos7840_port->wait_chase, - timeout); - - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timeout value back to seconds */ - wait = 30; - } - } -} - /***************************************************************************** * mos7840_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void mos7840_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7840_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty, } } - if (serial->dev) - /* flush and block until tx is empty */ - mos7840_block_until_tx_empty(tty, mos7840_port); - /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists */ if (serial->dev) { diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index bcdcbb82270..f5f3751a888 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty, return result; } -static void navman_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void navman_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index df653971272..1104617334f 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -66,8 +66,7 @@ static int debug; /* function prototypes */ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void omninet_close(struct usb_serial_port *port); static void omninet_read_bulk_callback(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty, return result; } -static void omninet_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void omninet_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index b500ad10b75..c20480aa975 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void opticon_close(struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7817b82889c..a16d69fadba 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -45,8 +45,9 @@ /* Function prototypes */ static int option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void option_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void option_close(struct usb_serial_port *port); +static void option_dtr_rts(struct usb_serial_port *port, int on); + static int option_startup(struct usb_serial *serial); static void option_shutdown(struct usb_serial *serial); static int option_write_room(struct tty_struct *tty); @@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty, static int option_tiocmget(struct tty_struct *tty, struct file *file); static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); +static int option_send_setup(struct usb_serial_port *port); static int option_suspend(struct usb_serial *serial, pm_message_t message); static int option_resume(struct usb_serial *serial); @@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = { .num_ports = 1, .open = option_open, .close = option_close, + .dtr_rts = option_dtr_rts, .write = option_write, .write_room = option_write_room, .chars_in_buffer = option_chars_in_buffer, @@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty, dbg("%s", __func__); /* Doesn't support option setting */ tty_termios_copy_hw(tty->termios, old_termios); - option_send_setup(tty, port); + option_send_setup(port); } static int option_tiocmget(struct tty_struct *tty, struct file *file) @@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return option_send_setup(tty, port); + return option_send_setup(port); } /* Write */ @@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty, dbg("%s", __func__); - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; - /* Reset low level data toggle and start reading from endpoints */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; @@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - option_send_setup(tty, port); + option_send_setup(port); return 0; } -static void option_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void option_dtr_rts(struct usb_serial_port *port, int on) { - int i; struct usb_serial *serial = port->serial; struct option_port_private *portdata; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); + mutex_lock(&serial->disc_mutex); + portdata->rts_state = on; + portdata->dtr_state = on; + if (serial->dev) + option_send_setup(port); + mutex_unlock(&serial->disc_mutex); +} - portdata->rts_state = 0; - portdata->dtr_state = 0; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - option_send_setup(tty, port); - mutex_unlock(&serial->disc_mutex); +static void option_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __func__); + portdata = usb_get_serial_port_data(port); + if (serial->dev) { /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); } - tty_port_tty_set(&port->port, NULL); } /* Helper functions used by option_setup_urbs */ @@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial) * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN * CDC. */ -static int option_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int option_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + int val = 0; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); - } - return 0; + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); } static int option_startup(struct usb_serial *serial) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index ba551f00f16..7de54781fe6 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -143,8 +143,7 @@ struct oti6858_control_pkt { /* function prototypes */ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int oti6858_ioctl(struct tty_struct *tty, struct file *file, @@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty, if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); - oti6858_close(tty, port, NULL); + oti6858_close(port); return -EPROTO; } /* setup termios */ if (tty) oti6858_set_termios(tty, port, &tmp_termios); - + port->port.drain_delay = 256; /* FIXME: check the FIFO length */ return 0; } -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void oti6858_close(struct usb_serial_port *port) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; - long timeout; - wait_queue_t wait; dbg("%s(port = %d)", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - dbg("%s(): entering wait loop", __func__); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (oti6858_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - || port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - dbg("%s(): after wait loop", __func__); - /* clear out any remaining data in the buffer */ oti6858_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - /* FIXME - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - */ - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - dbg("%s(): after schedule_timeout_interruptible()", __func__); + dbg("%s(): after buf_clear()", __func__); /* cancel scheduled setup */ cancel_delayed_work(&priv->delayed_setup_work); @@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty, usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - /* - if (tty && (tty->termios->c_cflag) & HUPCL) { - // drop DTR and RTS - spin_lock_irqsave(&priv->lock, flags); - priv->pending_setup.control &= ~CONTROL_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - } - */ } static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 751a533a434..e02dc3d643c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty, kfree(buf); } -static void pl2303_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + /* Change DTR and RTS */ + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, control); +} + +static void pl2303_close(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 || - timeout == 0 || signal_pending(current) || - port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ pl2303_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps, HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } } static int pl2303_open(struct tty_struct *tty, @@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } @@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) return result; } +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & UART_DCD) + return 1; + return 0; +} + static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = { .num_ports = 1, .open = pl2303_open, .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, .write = pl2303_write, .ioctl = pl2303_ioctl, .break_ctl = pl2303_break_ctl, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 913225c6161..1319b8968d8 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -240,57 +240,39 @@ struct sierra_port_private { int ri_state; }; -static int sierra_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int sierra_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; __u16 interface = 0; + int val = 0; dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; - - /* If composite device then properly report interface */ - if (serial->num_ports == 1) { - interface = sierra_calc_interface(serial); - - /* Control message is sent only to interfaces with - * interrupt_in endpoints - */ - if (port->interrupt_in_urb) { - /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); - } - } - - /* Otherwise the need to do non-composite mapping */ - else { - if (port->bulk_out_endpointAddress == 2) - interface = 0; - else if (port->bulk_out_endpointAddress == 4) - interface = 1; - else if (port->bulk_out_endpointAddress == 5) - interface = 2; - - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); - - } + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + /* If composite device then properly report interface */ + if (serial->num_ports == 1) + interface = sierra_calc_interface(serial); + + /* Otherwise the need to do non-composite mapping */ + else { + if (port->bulk_out_endpointAddress == 2) + interface = 0; + else if (port->bulk_out_endpointAddress == 4) + interface = 1; + else if (port->bulk_out_endpointAddress == 5) + interface = 2; } - + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); return 0; } @@ -299,7 +281,7 @@ static void sierra_set_termios(struct tty_struct *tty, { dev_dbg(&port->dev, "%s", __func__); tty_termios_copy_hw(tty->termios, old_termios); - sierra_send_setup(tty, port); + sierra_send_setup(port); } static int sierra_tiocmget(struct tty_struct *tty, struct file *file) @@ -338,7 +320,7 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return sierra_send_setup(tty, port); + return sierra_send_setup(port); } static void sierra_outdat_callback(struct urb *urb) @@ -598,7 +580,7 @@ static int sierra_open(struct tty_struct *tty, } } - sierra_send_setup(tty, port); + sierra_send_setup(port); /* start up the interrupt endpoint if we have one */ if (port->interrupt_in_urb) { @@ -610,32 +592,38 @@ static int sierra_open(struct tty_struct *tty, return 0; } -static void sierra_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_dtr_rts(struct usb_serial_port *port, int on) { - int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); - - portdata->rts_state = 0; - portdata->dtr_state = 0; + portdata->rts_state = on; + portdata->dtr_state = on; if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) - sierra_send_setup(tty, port); + sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + } +} + +static void sierra_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + dev_dbg(&port->dev, "%s", __func__); + portdata = usb_get_serial_port_data(port); + + if (serial->dev) { /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); } - usb_kill_urb(port->interrupt_in_urb); - tty_port_tty_set(&port->port, NULL); } static int sierra_startup(struct usb_serial *serial) @@ -737,6 +725,7 @@ static struct usb_serial_driver sierra_device = { .probe = sierra_probe, .open = sierra_open, .close = sierra_close, + .dtr_rts = sierra_dtr_rts, .write = sierra_write, .write_room = sierra_write_room, .set_termios = sierra_set_termios, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 5e7528cc81a..8f7ed8f1399 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); } +static int spcp8x5_carrier_raised(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & MSR_STATUS_LINE_DCD) + return 1; + return 0; +} + +static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control = MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS; + else + priv->line_control &= ~ (MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); +} + /* close the serial port. We should wait for data sending to device 1st and * then kill all urb. */ -static void spcp8x5_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void spcp8x5_close(struct usb_serial_port *port) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; int result; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = SPCP8x5_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (ringbuf_avail_data(priv->buf) == 0 || - timeout == 0 || signal_pending(current)) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ clear_ringbuf(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device (this is long enough - * for the entire all byte spcp8x5 hardware buffer to drain with no - * flow control for data rates of 1200 bps or more, for lower rates we - * should really know how much data is in the buffer to compute a delay - * that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560) / bps, HZ/10); - else - timeout = 2*HZ; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(timeout); - - /* clear control lines */ - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type); - } - } - /* kill urb */ if (port->write_urb != NULL) { result = usb_unlink_urb(port->write_urb); @@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty, if (ret) return ret; - spin_lock_irqsave(&priv->lock, flags); - if (tty && (tty->termios->c_cflag & CBAUD)) - priv->line_control = MCR_DTR | MCR_RTS; - else - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ @@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty, port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret) { - spcp8x5_close(tty, port, NULL); + spcp8x5_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = { .num_ports = 1, .open = spcp8x5_open, .close = spcp8x5_close, + .dtr_rts = spcp8x5_dtr_rts, + .carrier_raised = spcp8x5_carrier_raised, .write = spcp8x5_write, .set_termios = spcp8x5_set_termios, .ioctl = spcp8x5_ioctl, diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 69879e43794..8b07ebc6bae 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void symbol_close(struct usb_serial_port *port) { struct symbol_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 0a64bac306e..42cb04c403b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial); static void ti_shutdown(struct usb_serial *serial); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *file); -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file); +static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); @@ -647,8 +646,7 @@ release_lock: } -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file) +static void ti_close(struct usb_serial_port *port) { struct ti_device *tdev; struct ti_port *tport; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index f331e2bde88..1967a7edc10 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_interface_put; mutex_unlock(&serial->disc_mutex); } - mutex_unlock(&port->mutex); - return 0; + /* Now do the correct tty layer semantics */ + retval = tty_port_block_til_ready(&port->port, tty, filp); + if (retval == 0) + return 0; bailout_interface_put: usb_autopm_put_interface(serial->interface); @@ -259,64 +261,89 @@ bailout_serial_put: return retval; } -static void serial_close(struct tty_struct *tty, struct file *filp) +/** + * serial_do_down - shut down hardware + * @port: port to shut down + * + * Shut down a USB port unless it is the console. We never shut down the + * console hardware as it will always be in use. + * + * Don't free any resources at this point + */ +static void serial_do_down(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; + struct usb_serial_driver *drv = port->serial->type; struct usb_serial *serial; struct module *owner; - int count; - if (!port) + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) return; - dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->mutex); serial = port->serial; owner = serial->type->driver.owner; - if (port->port.count == 0) { - mutex_unlock(&port->mutex); - return; - } - - if (port->port.count == 1) - /* only call the device specific close if this - * port is being closed by the last owner. Ensure we do - * this before we drop the port count. The call is protected - * by the port mutex - */ - serial->type->close(tty, port, filp); - - if (port->port.count == (port->console ? 2 : 1)) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - /* We must do this before we drop the port count to - zero. */ - if (tty->driver_data) - tty->driver_data = NULL; - tty_port_tty_set(&port->port, NULL); - tty_kref_put(tty); - } - } + if (drv->close) + drv->close(port); - --port->port.count; - count = port->port.count; mutex_unlock(&port->mutex); - put_device(&port->dev); +} + +/** + * serial_do_free - free resources post close/hangup + * @port: port to free up + * + * Do the resource freeing and refcount dropping for the port. We must + * be careful about ordering and we must avoid freeing up the console. + */ +static void serial_do_free(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct module *owner; + + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) + return; + + serial = port->serial; + owner = serial->type->driver.owner; + put_device(&port->dev); /* Mustn't dereference port any more */ - if (count == 0) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); - } + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); - /* Mustn't dereference serial any more */ - if (count == 0) - module_put(owner); + module_put(owner); +} + +static void serial_close(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + + dbg("%s - port %d", __func__, port->number); + + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + + serial_do_down(port); + tty_port_close_end(&port->port, tty); + tty_port_tty_set(&port->port, NULL); + serial_do_free(port); +} + +static void serial_hangup(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + serial_do_down(port); + tty_port_hangup(&port->port); + serial_do_free(port); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device( return NULL; } +static int serial_carrier_raised(struct tty_port *port) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->carrier_raised) + return drv->carrier_raised(p); + /* No carrier control - don't block */ + return 1; +} + +static void serial_dtr_rts(struct tty_port *port, int on) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->dtr_rts) + drv->dtr_rts(p, on); +} + +static const struct tty_port_operations serial_port_ops = { + .carrier_raised = serial_carrier_raised, + .dtr_rts = serial_dtr_rts, +}; + int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface, if (!port) goto probe_error; tty_port_init(&port->port); + port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); mutex_init(&port->mutex); @@ -1071,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface) if (port) { struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty) { + /* The hangup will occur asynchronously but + the object refcounts will sort out all the + cleanup */ tty_hangup(tty); tty_kref_put(tty); } @@ -1135,6 +1189,7 @@ static const struct tty_operations serial_ops = { .open = serial_open, .close = serial_close, .write = serial_write, + .hangup = serial_hangup, .write_room = serial_write_room, .ioctl = serial_ioctl, .set_termios = serial_set_termios, @@ -1147,6 +1202,7 @@ static const struct tty_operations serial_ops = { .proc_fops = &serial_proc_fops, }; + struct tty_driver *usb_serial_tty_driver; static int __init usb_serial_init(void) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 5ac414bda71..b15f1c0e1d4 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -38,8 +38,7 @@ /* function prototypes for a handspring visor */ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void visor_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void visor_close(struct usb_serial_port *port); static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int visor_write_room(struct tty_struct *tty); @@ -324,8 +323,7 @@ exit: } -static void visor_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void visor_close(struct usb_serial_port *port) { struct visor_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5335d3211c0..7c7295d09f3 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -147,8 +147,7 @@ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_shutdown(struct usb_serial *serial); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void whiteheat_close(struct usb_serial_port *port); static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -712,8 +711,7 @@ exit: } -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void whiteheat_close(struct usb_serial_port *port) { struct whiteheat_private *info = usb_get_serial_port_data(port); struct whiteheat_urb_wrap *wrap; @@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->serial->disc_mutex); - /* filp is NULL when called from usb_serial_disconnect */ - if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - mutex_unlock(&port->serial->disc_mutex); - - tty->closing = 1; - -/* - * Not currently in use; tty_wait_until_sent() calls - * serial_chars_in_buffer() which deadlocks on the second semaphore - * acquisition. This should be fixed at some point. Greg's been - * notified. - if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { - tty_wait_until_sent(tty, CLOSING_DELAY); - } -*/ - - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - firm_report_tx_done(port); - firm_close(port); /* shutdown our bulk reads and writes */ @@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty, } spin_unlock_irq(&info->lock); mutex_unlock(&info->deathwarrant); - stop_command_port(port->serial); - - tty->closing = 0; } -- cgit v1.2.3-18-g5258 From 739e0285cbb162c8ddd0061fda581ee54a34c19a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:27:50 +0100 Subject: tty: Update cdc_acm The CDC ACM driver uses the tty layer correctly so needs conversion. Start by adding and initializing the port structures. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 5 +++++ drivers/usb/class/cdc-acm.h | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7a1164dd1d3..41d4ca527f8 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -89,6 +89,9 @@ static DEFINE_MUTEX(open_mutex); #define ACM_READY(acm) (acm && acm->dev && acm->used) +static const struct tty_port_operations acm_port_ops = { +}; + #ifdef VERBOSE_DEBUG #define verbose 1 #else @@ -1082,6 +1085,8 @@ skip_normal_probe: spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); + tty_port_init(&acm->port); + acm->port.ops = &acm_port_ops; buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 1f95e7aa1b6..19967cdb269 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -90,7 +90,8 @@ struct acm { struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ struct tty_struct *tty; /* the corresponding tty */ - struct urb *ctrlurb; /* urbs */ + struct tty_port port; /* our tty port data */ + struct urb *ctrlurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ dma_addr_t ctrl_dma; /* dma handles of buffers */ u8 *country_codes; /* country codes from device */ -- cgit v1.2.3-18-g5258 From 5ba5a5d21204f61ff655b322a90ed91c75194e4b Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Thu, 11 Jun 2009 12:28:37 +0100 Subject: tty: synclink_gt add receive pio mode Add receive programmed IO mode to reduce receive latency when using low data rates. The receive FIFO trigger level of 128 bytes used in DMA mode creates excessive latency when operating at low data rates. PIO mode is selected when user application requests data in blocks of less than 128 bytes. Signed-off-by: Paul Fulghum Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/synclink_gt.c | 77 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 67986ea0d47..1386625fc4c 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -214,6 +214,7 @@ struct slgt_desc #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) #define desc_count(a) (le16_to_cpu((a).count)) #define desc_status(a) (le16_to_cpu((a).status)) #define desc_complete(a) (le16_to_cpu((a).status) & BIT15) @@ -297,6 +298,7 @@ struct slgt_info { u32 max_frame_size; /* as set by device config */ unsigned int rbuf_fill_level; + unsigned int rx_pio; unsigned int if_mode; unsigned int base_clock; @@ -331,6 +333,8 @@ struct slgt_info { struct slgt_desc *rbufs; unsigned int rbuf_current; unsigned int rbuf_index; + unsigned int rbuf_fill_index; + unsigned short rbuf_fill_count; unsigned int tbuf_count; struct slgt_desc *tbufs; @@ -2110,6 +2114,40 @@ static void ri_change(struct slgt_info *info, unsigned short status) info->pending_bh |= BH_STATUS; } +static void isr_rxdata(struct slgt_info *info) +{ + unsigned int count = info->rbuf_fill_count; + unsigned int i = info->rbuf_fill_index; + unsigned short reg; + + while (rd_reg16(info, SSR) & IRQ_RXDATA) { + reg = rd_reg16(info, RDR); + DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); + if (desc_complete(info->rbufs[i])) { + /* all buffers full */ + rx_stop(info); + info->rx_restart = 1; + continue; + } + info->rbufs[i].buf[count++] = (unsigned char)reg; + /* async mode saves status byte to buffer for each data byte */ + if (info->params.mode == MGSL_MODE_ASYNC) + info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); + if (count == info->rbuf_fill_level || (reg & BIT10)) { + /* buffer full or end of frame */ + set_desc_count(info->rbufs[i], count); + set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); + info->rbuf_fill_count = count = 0; + if (++i == info->rbuf_count) + i = 0; + info->pending_bh |= BH_RECEIVE; + } + } + + info->rbuf_fill_index = i; + info->rbuf_fill_count = count; +} + static void isr_serial(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -2125,6 +2163,8 @@ static void isr_serial(struct slgt_info *info) if (info->tx_count) isr_txeom(info, status); } + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { info->icount.brk++; /* process break detection if tty control allows */ @@ -2141,7 +2181,8 @@ static void isr_serial(struct slgt_info *info) } else { if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) isr_txeom(info, status); - + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if (status & IRQ_RXIDLE) { if (status & RXIDLE) info->icount.rxidle++; @@ -2642,6 +2683,10 @@ static int rx_enable(struct slgt_info *info, int enable) return -EINVAL; } info->rbuf_fill_level = rbuf_fill_level; + if (rbuf_fill_level < 128) + info->rx_pio = 1; /* PIO mode */ + else + info->rx_pio = 0; /* DMA mode */ rx_stop(info); /* restart receiver to use new fill level */ } @@ -3844,15 +3889,27 @@ static void rx_start(struct slgt_info *info) rdma_reset(info); reset_rbufs(info); - /* set 1st descriptor address */ - wr_reg32(info, RDDAR, info->rbufs[0].pdesc); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* enable rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT2 + BIT0)); + if (info->rx_pio) { + /* rx request when rx FIFO not empty */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); + slgt_irq_on(info, IRQ_RXDATA); + if (info->params.mode == MGSL_MODE_ASYNC) { + /* enable saving of rx status */ + wr_reg32(info, RDCSR, BIT6); + } } else { - /* enable saving of rx status, rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + /* rx request when rx FIFO half full */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } } slgt_irq_on(info, IRQ_RXOVER); @@ -4470,6 +4527,8 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last static void reset_rbufs(struct slgt_info *info) { free_rbufs(info, 0, info->rbuf_count - 1); + info->rbuf_fill_index = 0; + info->rbuf_fill_count = 0; } /* -- cgit v1.2.3-18-g5258 From 97e87f8ebe978e881c7325ba490574bd5500b133 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:29:27 +0100 Subject: tty: cyclades, plx9060 casts cleanup Remove ugly all-over-the-code casts of ctl_addr to 9060 space. Add an union to the cyclades_card structure, which contains a pointer to both 9050 and 9060 spaces. The 9050 space layout is unknown, so let it still as a void __iomem pointer. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 65 +++++++++++++++++++++++++------------------------ 1 file changed, 33 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index ccf68a9e24b..2cbf74134f1 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -666,12 +666,10 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1) #define Z_FPGA_CHECK(card) \ - ((readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) + ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->mail_box_0)) || \ - Z_FPGA_CHECK(card)) && \ +#define ISZLOADED(card) (((ZO_V1 == readl(&(card).ctl_addr.p9060->mail_box_0)) \ + || Z_FPGA_CHECK(card)) && \ (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) @@ -1400,14 +1398,12 @@ cyz_fetch_msg(struct cyclades_card *cinfo, zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; - loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->loc_doorbell); + loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); if (loc_doorbell) { *cmd = (char)(0xff & loc_doorbell); *channel = readl(&board_ctrl->fwcmd_channel); *param = (__u32) readl(&board_ctrl->fwcmd_param); - cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - loc_doorbell, 0xffffffff); + cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); return 1; } return 0; @@ -1431,8 +1427,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo, board_ctrl = &zfw_ctrl->board_ctrl; index = 0; - pci_doorbell = - &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; + pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; while ((readl(pci_doorbell) & 0xff) != 0) { if (index++ == 1000) return (int)(readl(pci_doorbell) & 0xff); @@ -1635,8 +1630,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; fw_ver = readl(&board_ctrl->fw_version); - hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - mail_box_0); + hw_ver = readl(&cinfo->ctl_addr.p9060->mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; @@ -2394,8 +2388,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->mail_box_0)) && + if (((ZE_V1 == readl(&cinfo->ctl_addr.p9060-> + mail_box_0)) && Z_FPGA_CHECK(*cinfo)) && (ZFIRM_HLT == readl( &firm_id->signature))) { @@ -2417,6 +2411,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) if (!cinfo->intr_enabled) { struct ZFW_CTRL __iomem *zfw_ctrl; struct BOARD_CTRL __iomem *board_ctrl; + u16 intr; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & @@ -2425,8 +2420,10 @@ static int cy_open(struct tty_struct *tty, struct file *filp) board_ctrl = &zfw_ctrl->board_ctrl; /* Enable interrupts on the PLX chip */ - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) | 0x0900); + intr = readw(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat) | 0x0900; + cy_writew(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat, intr); /* Enable interrupts on the FW */ retval = cyz_issue_cmd(cinfo, 0, C_CM_IRQ_ENBL, 0L); @@ -4347,8 +4344,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ - mailbox = readl(&((struct RUNTIME_9060 __iomem *) - cinfo->ctl_addr)->mail_box_0); + mailbox = readl(&cinfo->ctl_addr.p9060->mail_box_0); nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after @@ -4613,7 +4609,7 @@ static int __init cy_detect_isa(void) /* set cy_card */ cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr = NULL; + cy_card[j].ctl_addr.p9050 = NULL; cy_card[j].irq = (int)cy_isa_irq; cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; @@ -5013,7 +5009,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } /* Disable interrupts on the PLX before resetting it */ - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); plx_init(pdev, irq, addr0); @@ -5109,7 +5106,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, /* set cy_card */ cy_card[card_no].base_addr = addr2; - cy_card[card_no].ctl_addr = addr0; + cy_card[card_no].ctl_addr.p9050 = addr0; cy_card[card_no].irq = irq; cy_card[card_no].bus_index = 1; cy_card[card_no].first_line = cy_next_channel; @@ -5125,17 +5122,20 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; switch (plx_ver) { case PLX_9050: - cy_writeb(addr0 + 0x4c, 0x43); break; case PLX_9060: case PLX_9080: default: /* Old boards, use PLX_9060 */ - plx_init(pdev, irq, addr0); - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); + { + struct RUNTIME_9060 __iomem *ctl_addr = addr0; + plx_init(pdev, irq, ctl_addr); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) | 0x0900); break; } + } } dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " @@ -5168,17 +5168,18 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) /* non-Z with old PLX */ if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == PLX_9050) - cy_writeb(cinfo->ctl_addr + 0x4c, 0); + cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); else #ifndef CONFIG_CYZ_INTR if (!IS_CYC_Z(*cinfo)) #endif - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) & ~0x0900); + cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, + readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & + ~0x0900); iounmap(cinfo->base_addr); - if (cinfo->ctl_addr) - iounmap(cinfo->ctl_addr); + if (cinfo->ctl_addr.p9050) + iounmap(cinfo->ctl_addr.p9050); if (cinfo->irq #ifndef CONFIG_CYZ_INTR && !IS_CYC_Z(*cinfo) @@ -5373,8 +5374,8 @@ static void __exit cy_cleanup_module(void) /* clear interrupt */ cy_writeb(card->base_addr + Cy_ClrIntr, 0); iounmap(card->base_addr); - if (card->ctl_addr) - iounmap(card->ctl_addr); + if (card->ctl_addr.p9050) + iounmap(card->ctl_addr.p9050); if (card->irq #ifndef CONFIG_CYZ_INTR && !IS_CYC_Z(*card) -- cgit v1.2.3-18-g5258 From 101b81590d8df0a74c33cf739886247c0a13f4af Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:30:10 +0100 Subject: tty: cyclades, cache HW version Store HW version locally to not read it all the time in interrupts and alike. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 32 +++++++++++--------------------- 1 file changed, 11 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 2cbf74134f1..cf191cc1c92 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -668,8 +668,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define Z_FPGA_CHECK(card) \ ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1 == readl(&(card).ctl_addr.p9060->mail_box_0)) \ - || Z_FPGA_CHECK(card)) && \ +#define ISZLOADED(card) ((ZO_V1 == (card).hw_ver || Z_FPGA_CHECK(card)) && \ (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) @@ -1393,8 +1392,6 @@ cyz_fetch_msg(struct cyclades_card *cinfo, unsigned long loc_doorbell; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) - return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -1619,10 +1616,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) static struct BOARD_CTRL __iomem *board_ctrl; static struct CH_CTRL __iomem *ch_ctrl; static struct BUF_CTRL __iomem *buf_ctrl; - __u32 channel; + __u32 channel, param, fw_ver; __u8 cmd; - __u32 param; - __u32 hw_ver, fw_ver; int special_count; int delta_count; @@ -1630,7 +1625,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; fw_ver = readl(&board_ctrl->fw_version); - hw_ver = readl(&cinfo->ctl_addr.p9060->mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; @@ -2388,11 +2382,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp) struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == readl(&cinfo->ctl_addr.p9060-> - mail_box_0)) && - Z_FPGA_CHECK(*cinfo)) && - (ZFIRM_HLT == readl( - &firm_id->signature))) { + if (cinfo->hw_ver == ZE_V1 && Z_FPGA_CHECK(*cinfo) && + readl(&firm_id->signature) == + ZFIRM_HLT) { printk(KERN_ERR "cyc:Cyclades-Z Error: you " "need an external power supply for " "this number of ports.\nFirmware " @@ -4336,7 +4328,6 @@ static void cy_hangup(struct tty_struct *tty) static int __devinit cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; - u32 uninitialized_var(mailbox); unsigned int nports, port; unsigned short chip_number; int uninitialized_var(index); @@ -4344,8 +4335,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ - mailbox = readl(&cinfo->ctl_addr.p9060->mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; + nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after Z FW is loaded */ @@ -4377,7 +4367,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) if (IS_CYC_Z(*cinfo)) { info->type = PORT_STARTECH; - if (mailbox == ZO_V1) + if (cinfo->hw_ver == ZO_V1) info->xmit_fifo_size = CYZ_FIFO_SIZE; else info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; @@ -4932,7 +4922,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, { void __iomem *addr0 = NULL, *addr2 = NULL; char *card_name = NULL; - u32 mailbox; + u32 uninitialized_var(mailbox); unsigned int device_id, nchan = 0, card_no, i; unsigned char plx_ver; int retval, irq; @@ -5014,7 +5004,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, plx_init(pdev, irq, addr0); - mailbox = (u32)readl(&ctl_addr->mail_box_0); + mailbox = readl(&ctl_addr->mail_box_0); addr2 = ioremap_nocache(pci_resource_start(pdev, 2), mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); @@ -5026,7 +5016,6 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (mailbox == ZE_V1) { card_name = "Cyclades-Ze"; - readl(&ctl_addr->mail_box_0); nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; @@ -5089,6 +5078,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } cy_card[card_no].num_chips = nchan / 4; } else { + cy_card[card_no].hw_ver = mailbox; + cy_card[card_no].num_chips = (unsigned int)-1; #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ if (irq != 0 && irq != 255) { @@ -5101,7 +5092,6 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } } #endif /* CONFIG_CYZ_INTR */ - cy_card[card_no].num_chips = (unsigned int)-1; } /* set cy_card */ -- cgit v1.2.3-18-g5258 From 2693f485c22d18474c077f12fd0f797ee8679b33 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:31:06 +0100 Subject: tty: cyclades, convert macros to inlines Remove ugly macros and add inlines instead of them. This improves readability and type checking a much. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 130 ++++++++++++++++++++++++++---------------------- 1 file changed, 71 insertions(+), 59 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index cf191cc1c92..c9a503f4724 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -663,15 +663,6 @@ static void cy_throttle(struct tty_struct *tty); static void cy_send_xchar(struct tty_struct *tty, char ch); -#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1) - -#define Z_FPGA_CHECK(card) \ - ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) - -#define ISZLOADED(card) ((ZO_V1 == (card).hw_ver || Z_FPGA_CHECK(card)) && \ - (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ - ((card).base_addr+ID_ADDRESS))->signature))) - #ifndef SERIAL_XMIT_SIZE #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) #endif @@ -684,8 +675,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define DRIVER_VERSION 0x02010203 #define RAM_SIZE 0x80000 -#define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0) - enum zblock_type { ZBLOCK_PRG = 0, ZBLOCK_FPGA = 1 @@ -880,6 +869,29 @@ static void cyz_rx_restart(unsigned long); static struct timer_list cyz_rx_full_timer[NR_PORTS]; #endif /* CONFIG_CYZ_INTR */ +static inline bool cy_is_Z(struct cyclades_card *card) +{ + return card->num_chips == (unsigned int)-1; +} + +static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) +{ + return readl(&ctl_addr->init_ctrl) & (1 << 17); +} + +static inline bool cyz_fpga_loaded(struct cyclades_card *card) +{ + return __cyz_fpga_loaded(card->ctl_addr.p9060); +} + +static inline bool cyz_is_loaded(struct cyclades_card *card) +{ + struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; + + return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && + readl(&fw_id->signature) == ZFIRM_ID; +} + static inline int serial_paranoia_check(struct cyclades_port *info, char *name, const char *routine) { @@ -1417,7 +1429,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo, unsigned int index; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); @@ -1725,7 +1737,7 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) { struct cyclades_card *cinfo = dev_id; - if (unlikely(!ISZLOADED(*cinfo))) { + if (unlikely(!cyz_is_loaded(cinfo))) { #ifdef CY_DEBUG_INTERRUPTS printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " "(IRQ%d).\n", irq); @@ -1773,9 +1785,9 @@ static void cyz_poll(unsigned long arg) for (card = 0; card < NR_CARDS; card++) { cinfo = &cy_card[card]; - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) continue; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) continue; firm_id = cinfo->base_addr + ID_ADDRESS; @@ -1854,7 +1866,7 @@ static int startup(struct cyclades_port *info) set_line_char(info); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -1911,7 +1923,7 @@ static int startup(struct cyclades_port *info) base_addr = card->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return -ENODEV; zfw_ctrl = card->base_addr + @@ -2006,7 +2018,7 @@ static void start_xmit(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2050,7 +2062,7 @@ static void shutdown(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2106,7 +2118,7 @@ static void shutdown(struct cyclades_port *info) #endif firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + @@ -2213,7 +2225,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #endif info->port.blocked_open++; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; index = cinfo->bus_index; @@ -2276,7 +2288,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, base_addr = cinfo->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { + if (!cyz_is_loaded(cinfo)) { __set_current_state(TASK_RUNNING); remove_wait_queue(&info->port.open_wait, &wait); return -EINVAL; @@ -2377,12 +2389,12 @@ static int cy_open(struct tty_struct *tty, struct file *filp) treat it as absent from the system. This will make the user pay attention. */ - if (IS_CYC_Z(*info->card)) { + if (cy_is_Z(info->card)) { struct cyclades_card *cinfo = info->card; struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { - if (cinfo->hw_ver == ZE_V1 && Z_FPGA_CHECK(*cinfo) && + if (!cyz_is_loaded(cinfo)) { + if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && readl(&firm_id->signature) == ZFIRM_HLT) { printk(KERN_ERR "cyc:Cyclades-Z Error: you " @@ -2537,7 +2549,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) #endif card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2582,7 +2594,7 @@ static void cy_flush_buffer(struct tty_struct *tty) info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; spin_unlock_irqrestore(&card->card_lock, flags); - if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board + if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board buffers as well */ spin_lock_irqsave(&card->card_lock, flags); retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); @@ -2663,7 +2675,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { int channel = info->line - card->first_line; int index = card->bus_index; void __iomem *base_addr = card->base_addr + @@ -2883,7 +2895,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) channel = (info->line) - (card->first_line); #ifdef Z_EXT_CHARS_IN_BUFFER - if (!IS_CYC_Z(cy_card[card])) { + if (!cy_is_Z(card)) { #endif /* Z_EXT_CHARS_IN_BUFFER */ #ifdef CY_DEBUG_IO printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", @@ -2996,7 +3008,7 @@ static void set_line_char(struct cyclades_port *info) channel = info->line - card->first_line; chip_number = channel / 4; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { index = card->bus_index; @@ -3221,7 +3233,7 @@ static void set_line_char(struct cyclades_port *info) int retval; firm_id = card->base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + @@ -3438,7 +3450,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3478,7 +3490,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3504,7 +3516,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) } else { base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3547,7 +3559,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3622,7 +3634,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3694,7 +3706,7 @@ static int cy_break(struct tty_struct *tty, int break_state) card = info->card; spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { /* Let the transmit ISR take care of this (since it requires stuffing characters into the output stream). */ @@ -3763,7 +3775,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3791,7 +3803,7 @@ static int get_threshold(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3825,7 +3837,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3848,7 +3860,7 @@ static int get_timeout(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4102,7 +4114,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch) card = info->card; channel = info->line - card->first_line; - if (IS_CYC_Z(*card)) { + if (cy_is_Z(card)) { if (ch == STOP_CHAR(tty)) cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); else if (ch == START_CHAR(tty)) @@ -4135,7 +4147,7 @@ static void cy_throttle(struct tty_struct *tty) card = info->card; if (I_IXOFF(tty)) { - if (!IS_CYC_Z(*card)) + if (!cy_is_Z(card)) cy_send_xchar(tty, STOP_CHAR(tty)); else info->throttle = 1; @@ -4143,7 +4155,7 @@ static void cy_throttle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4200,7 +4212,7 @@ static void cy_unthrottle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4244,7 +4256,7 @@ static void cy_stop(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { index = cinfo->bus_index; chip = channel >> 2; channel &= 0x03; @@ -4277,7 +4289,7 @@ static void cy_start(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; index = cinfo->bus_index; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); @@ -4334,7 +4346,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); - if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ + if (cy_is_Z(cinfo)) { /* Cyclades-Z */ nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after @@ -4365,7 +4377,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) init_completion(&info->shutdown_wait); init_waitqueue_head(&info->delta_msr_wait); - if (IS_CYC_Z(*cinfo)) { + if (cy_is_Z(cinfo)) { info->type = PORT_STARTECH; if (cinfo->hw_ver == ZO_V1) info->xmit_fifo_size = CYZ_FIFO_SIZE; @@ -4408,7 +4420,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) } #ifndef CONFIG_CYZ_INTR - if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { + if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { mod_timer(&cyz_timerlist, jiffies + 1); #ifdef CY_PCI_DEBUG printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); @@ -4771,7 +4783,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, /* Check whether the firmware is already loaded and running. If positive, skip this board */ - if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { + if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { u32 cntval = readl(base_addr + 0x190); udelay(100); @@ -4790,7 +4802,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, mailbox = readl(&ctl_addr->mail_box_0); - if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) { + if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { /* stops CPU and set window to beginning of RAM */ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); cy_writel(&cust->cpu_stop, 0); @@ -4806,7 +4818,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr); if (retval) goto err_rel; - if (!Z_FPGA_LOADED(ctl_addr)) { + if (!__cyz_fpga_loaded(ctl_addr)) { dev_err(&pdev->dev, "fw upload successful, but fw is " "not loaded\n"); goto err_rel; @@ -4865,7 +4877,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, "system before loading the new FW to the " "Cyclades-Z.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); retval = -EIO; @@ -4889,7 +4901,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, "check the connection between the Z host card and the " "serial expanders.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); dev_info(&pdev->dev, "Null number of ports detected. Board " @@ -5156,12 +5168,12 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) unsigned int i; /* non-Z with old PLX */ - if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == PLX_9050) cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); else #ifndef CONFIG_CYZ_INTR - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) #endif cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & @@ -5172,7 +5184,7 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) iounmap(cinfo->ctl_addr.p9050); if (cinfo->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*cinfo) + && !cy_is_Z(cinfo) #endif /* CONFIG_CYZ_INTR */ ) free_irq(cinfo->irq, cinfo); @@ -5368,7 +5380,7 @@ static void __exit cy_cleanup_module(void) iounmap(card->ctl_addr.p9050); if (card->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*card) + && !cy_is_Z(card) #endif /* CONFIG_CYZ_INTR */ ) free_irq(card->irq, card); -- cgit v1.2.3-18-g5258 From 963118eef9e6706e2b5356309fb0cdd9c9eba81d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:34:27 +0100 Subject: tty: cyclades, fix nports handling Set up ports right after FW load so that we won't allocate maximal (64) ports when we use few. Also remove reading of nports in irq context, since we know it from initialisation now. This also fixes a tty ports unregistration on some fail paths and for Ze which registered 64 and unregistered real port count. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 58 +++++++++++++++---------------------------------- 1 file changed, 17 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index c9a503f4724..6adbc975966 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -604,7 +604,6 @@ #define NR_PORTS 256 -#define ZE_V1_NPORTS 64 #define ZO_V1 0 #define ZO_V2 1 #define ZE_V1 2 @@ -1777,7 +1776,6 @@ static void cyz_poll(unsigned long arg) struct tty_struct *tty; struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct BUF_CTRL __iomem *buf_ctrl; unsigned long expires = jiffies + HZ; unsigned int port, card; @@ -1793,11 +1791,9 @@ static void cyz_poll(unsigned long arg) firm_id = cinfo->base_addr + ID_ADDRESS; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &(zfw_ctrl->board_ctrl); /* Skip first polling cycle to avoid racing conditions with the FW */ if (!cinfo->intr_enabled) { - cinfo->nports = (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; continue; } @@ -2413,16 +2409,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) interrupts should be enabled as soon as the first open happens to one of its ports. */ if (!cinfo->intr_enabled) { - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; u16 intr; - zfw_ctrl = cinfo->base_addr + - (readl(&firm_id->zfwctrl_addr) & - 0xfffff); - - board_ctrl = &zfw_ctrl->board_ctrl; - /* Enable interrupts on the PLX chip */ intr = readw(&cinfo->ctl_addr.p9060-> intr_ctrl_stat) | 0x0900; @@ -2435,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp) printk(KERN_ERR "cyc:IRQ enable retval " "was %x\n", retval); } - cinfo->nports = - (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; } } @@ -4340,30 +4326,20 @@ static void cy_hangup(struct tty_struct *tty) static int __devinit cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; - unsigned int nports, port; + unsigned int port; unsigned short chip_number; - int uninitialized_var(index); spin_lock_init(&cinfo->card_lock); + cinfo->intr_enabled = 0; - if (cy_is_Z(cinfo)) { /* Cyclades-Z */ - nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - } else { - index = cinfo->bus_index; - nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - } - - cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); + cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), + GFP_KERNEL); if (cinfo->ports == NULL) { printk(KERN_ERR "Cyclades: cannot allocate ports\n"); - cinfo->nports = 0; return -ENOMEM; } - for (port = cinfo->first_line; port < cinfo->first_line + nports; + for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports; port++) { info = &cinfo->ports[port - cinfo->first_line]; tty_port_init(&info->port); @@ -4388,6 +4364,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) cyz_rx_restart, (unsigned long)info); #endif } else { + int index = cinfo->bus_index; info->type = PORT_CIRRUS; info->xmit_fifo_size = CyMAX_CHAR_FIFO; info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; @@ -4615,7 +4592,8 @@ static int __init cy_detect_isa(void) cy_card[j].irq = (int)cy_isa_irq; cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan / 4; + cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + cy_card[j].nports = cy_isa_nchan; if (cy_init_card(&cy_card[j])) { cy_card[j].base_addr = NULL; free_irq(cy_isa_irq, &cy_card[j]); @@ -4771,7 +4749,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, struct CUSTOM_REG __iomem *cust = base_addr; struct ZFW_CTRL __iomem *pt_zfwctrl; void __iomem *tmp; - u32 mailbox, status; + u32 mailbox, status, nchan; unsigned int i; int retval; @@ -4892,11 +4870,11 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), base_addr + readl(&fid->zfwctrl_addr)); + nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", - readl(&pt_zfwctrl->board_ctrl.fw_version), - readl(&pt_zfwctrl->board_ctrl.n_channel)); + readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); - if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) { + if (nchan == 0) { dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " "check the connection between the Z host card and the " "serial expanders.\n"); @@ -4922,7 +4900,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | 0x00030800UL); - return 0; + return nchan; err_rel: release_firmware(fw); err: @@ -5027,12 +5005,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (mailbox == ZE_V1) { card_name = "Cyclades-Ze"; - - nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; - nchan = 8; - #ifdef CY_PCI_DEBUG if (mailbox == ZO_V1) { cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); @@ -5057,8 +5031,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval) + if (retval <= 0) goto err_unmap; + nchan = retval; } if ((cy_next_channel + nchan) > NR_PORTS) { @@ -5088,7 +5063,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "could not allocate IRQ\n"); goto err_unmap; } - cy_card[card_no].num_chips = nchan / 4; + cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; } else { cy_card[card_no].hw_ver = mailbox; cy_card[card_no].num_chips = (unsigned int)-1; @@ -5112,6 +5087,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, cy_card[card_no].irq = irq; cy_card[card_no].bus_index = 1; cy_card[card_no].first_line = cy_next_channel; + cy_card[card_no].nports = nchan; retval = cy_init_card(&cy_card[card_no]); if (retval) goto err_null; -- cgit v1.2.3-18-g5258 From b39933fbd304021580800796683b8ddaa3dd0a6a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:35:21 +0100 Subject: tty: cyclades, remove unused variables Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 6adbc975966..45601905174 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2963,7 +2963,6 @@ static void set_line_char(struct cyclades_port *info) void __iomem *base_addr; int chip, channel, index; unsigned cflag, iflag; - unsigned short chip_number; int baud, baud_rate = 0; int i; @@ -2992,7 +2991,6 @@ static void set_line_char(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - chip_number = channel / 4; if (!cy_is_Z(card)) { @@ -3212,9 +3210,7 @@ static void set_line_char(struct cyclades_port *info) } else { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct CH_CTRL __iomem *ch_ctrl; - struct BUF_CTRL __iomem *buf_ctrl; __u32 sw_flow; int retval; @@ -3224,9 +3220,7 @@ static void set_line_char(struct cyclades_port *info) zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; /* baud rate */ baud = tty_get_baud_rate(info->port.tty); -- cgit v1.2.3-18-g5258 From 10077d4a6674f535abdbe25cdecb1202af7948f1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:36:09 +0100 Subject: tty: cdc_acm add krefs Now we have a port structure begin using the fields and kref counts Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 164 ++++++++++++++++++++++++++------------------ drivers/usb/class/cdc-acm.h | 2 - 2 files changed, 98 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 41d4ca527f8..b4e73aa759d 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -62,7 +62,7 @@ #include #include #include -#include +#include #include #include #include @@ -87,7 +87,7 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(open_mutex); -#define ACM_READY(acm) (acm && acm->dev && acm->used) +#define ACM_READY(acm) (acm && acm->dev && acm->port.count) static const struct tty_port_operations acm_port_ops = { }; @@ -265,6 +265,7 @@ static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; struct usb_cdc_notification *dr = urb->transfer_buffer; + struct tty_struct *tty; unsigned char *data; int newctrl; int retval; @@ -297,12 +298,16 @@ static void acm_ctrl_irq(struct urb *urb) break; case USB_CDC_NOTIFY_SERIAL_STATE: - + tty = tty_port_tty_get(&acm->port); newctrl = get_unaligned_le16(data); - if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { - dbg("calling hangup"); - tty_hangup(acm->tty); + if (tty) { + if (!acm->clocal && + (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dbg("calling hangup"); + tty_hangup(tty); + } + tty_kref_put(tty); } acm->ctrlin = newctrl; @@ -374,15 +379,14 @@ static void acm_rx_tasklet(unsigned long _acm) { struct acm *acm = (void *)_acm; struct acm_rb *buf; - struct tty_struct *tty = acm->tty; + struct tty_struct *tty; struct acm_ru *rcv; unsigned long flags; unsigned char throttled; dbg("Entering acm_rx_tasklet"); - if (!ACM_READY(acm)) - { + if (!ACM_READY(acm)) { dbg("acm_rx_tasklet: ACM not ready"); return; } @@ -390,12 +394,13 @@ static void acm_rx_tasklet(unsigned long _acm) spin_lock_irqsave(&acm->throttle_lock, flags); throttled = acm->throttle; spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (throttled) - { + if (throttled) { dbg("acm_rx_tasklet: throttled"); return; } + tty = tty_port_tty_get(&acm->port); + next_buffer: spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->filled_read_bufs)) { @@ -409,20 +414,22 @@ next_buffer: dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); - tty_buffer_request_room(tty, buf->size); - spin_lock_irqsave(&acm->throttle_lock, flags); - throttled = acm->throttle; - spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (!throttled) - tty_insert_flip_string(tty, buf->base, buf->size); - tty_flip_buffer_push(tty); - - if (throttled) { - dbg("Throttling noticed"); - spin_lock_irqsave(&acm->read_lock, flags); - list_add(&buf->list, &acm->filled_read_bufs); - spin_unlock_irqrestore(&acm->read_lock, flags); - return; + if (tty) { + spin_lock_irqsave(&acm->throttle_lock, flags); + throttled = acm->throttle; + spin_unlock_irqrestore(&acm->throttle_lock, flags); + if (!throttled) { + tty_buffer_request_room(tty, buf->size); + tty_insert_flip_string(tty, buf->base, buf->size); + tty_flip_buffer_push(tty); + } else { + tty_kref_put(tty); + dbg("Throttling noticed"); + spin_lock_irqsave(&acm->read_lock, flags); + list_add(&buf->list, &acm->filled_read_bufs); + spin_unlock_irqrestore(&acm->read_lock, flags); + return; + } } spin_lock_irqsave(&acm->read_lock, flags); @@ -431,6 +438,8 @@ next_buffer: goto next_buffer; urbs: + tty_kref_put(tty); + while (!list_empty(&acm->spare_read_bufs)) { spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->spare_read_urbs)) { @@ -502,11 +511,14 @@ static void acm_write_bulk(struct urb *urb) static void acm_softint(struct work_struct *work) { struct acm *acm = container_of(work, struct acm, work); + struct tty_struct *tty; dev_vdbg(&acm->data->dev, "tx work\n"); if (!ACM_READY(acm)) return; - tty_wakeup(acm->tty); + tty = tty_port_tty_get(&acm->port); + tty_wakeup(tty); + tty_kref_put(tty); } static void acm_waker(struct work_struct *waker) @@ -546,8 +558,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) rv = 0; set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); + tty->driver_data = acm; - acm->tty = tty; + tty_port_tty_set(&acm->port, tty); if (usb_autopm_get_interface(acm->control) < 0) goto early_bail; @@ -555,11 +568,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->control->needs_remote_wakeup = 1; mutex_lock(&acm->mutex); - if (acm->used++) { + if (acm->port.count++) { usb_autopm_put_interface(acm->control); goto done; - } - + } acm->ctrlurb->dev = acm->dev; if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { @@ -570,6 +582,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) && (acm->ctrl_caps & USB_CDC_CAP_LINE)) goto full_bailout; + usb_autopm_put_interface(acm->control); INIT_LIST_HEAD(&acm->spare_read_urbs); @@ -585,7 +598,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; tasklet_schedule(&acm->urb_task); - + rv = tty_port_block_til_ready(&acm->port, tty, filp); done: mutex_unlock(&acm->mutex); err_out: @@ -596,16 +609,17 @@ full_bailout: usb_kill_urb(acm->ctrlurb); bail_out: usb_autopm_put_interface(acm->control); - acm->used--; + acm->port.count--; mutex_unlock(&acm->mutex); early_bail: mutex_unlock(&open_mutex); + tty_port_tty_set(&acm->port, NULL); return -EIO; } static void acm_tty_unregister(struct acm *acm) { - int i,nr; + int i, nr; nr = acm->rx_buflimit; tty_unregister_device(acm_tty_driver, acm->minor); @@ -622,37 +636,51 @@ static void acm_tty_unregister(struct acm *acm) static int acm_tty_chars_in_buffer(struct tty_struct *tty); +static void acm_port_down(struct acm *acm, int drain) +{ + int i, nr = acm->rx_buflimit; + mutex_lock(&open_mutex); + if (acm->dev) { + usb_autopm_get_interface(acm->control); + acm_set_control(acm, acm->ctrlout = 0); + /* try letting the last writes drain naturally */ + if (drain) { + wait_event_interruptible_timeout(acm->drain_wait, + (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, + ACM_CLOSE_TIMEOUT * HZ); + } + usb_kill_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_kill_urb(acm->wb[i].urb); + for (i = 0; i < nr; i++) + usb_kill_urb(acm->ru[i].urb); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + } + mutex_unlock(&open_mutex); +} + +static void acm_tty_hangup(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + tty_port_hangup(&acm->port); + acm_port_down(acm, 0); +} + static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; - int i,nr; - if (!acm || !acm->used) + /* Perform the closing process and see if we need to do the hardware + shutdown */ + if (tty_port_close_start(&acm->port, tty, filp) == 0) return; - - nr = acm->rx_buflimit; + acm_port_down(acm, 0); + tty_port_close_end(&acm->port, tty); mutex_lock(&open_mutex); - if (!--acm->used) { - if (acm->dev) { - usb_autopm_get_interface(acm->control); - acm_set_control(acm, acm->ctrlout = 0); - - /* try letting the last writes drain naturally */ - wait_event_interruptible_timeout(acm->drain_wait, - (ACM_NW == acm_wb_is_avail(acm)) - || !acm->dev, - ACM_CLOSE_TIMEOUT * HZ); - - usb_kill_urb(acm->ctrlurb); - for (i = 0; i < ACM_NW; i++) - usb_kill_urb(acm->wb[i].urb); - for (i = 0; i < nr; i++) - usb_kill_urb(acm->ru[i].urb); - acm->control->needs_remote_wakeup = 0; - usb_autopm_put_interface(acm->control); - } else - acm_tty_unregister(acm); - } + tty_port_tty_set(&acm->port, NULL); + if (!acm->dev) + acm_tty_unregister(acm); mutex_unlock(&open_mutex); } @@ -885,8 +913,8 @@ static int acm_write_buffers_alloc(struct acm *acm) return 0; } -static int acm_probe (struct usb_interface *intf, - const struct usb_device_id *id) +static int acm_probe(struct usb_interface *intf, + const struct usb_device_id *id) { struct usb_cdc_union_desc *union_header = NULL; struct usb_cdc_country_functional_desc *cfd = NULL; @@ -1232,6 +1260,7 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); struct usb_device *usb_dev = interface_to_usbdev(intf); + struct tty_struct *tty; /* sibling interface is already cleaning up */ if (!acm) @@ -1258,16 +1287,18 @@ static void acm_disconnect(struct usb_interface *intf) usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : acm->control); - if (!acm->used) { + if (acm->port.count == 0) { acm_tty_unregister(acm); mutex_unlock(&open_mutex); return; } mutex_unlock(&open_mutex); - - if (acm->tty) - tty_hangup(acm->tty); + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } #ifdef CONFIG_PM @@ -1302,7 +1333,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) */ mutex_lock(&acm->mutex); - if (acm->used) + if (acm->port.count) stop_data_traffic(acm); mutex_unlock(&acm->mutex); @@ -1324,7 +1355,7 @@ static int acm_resume(struct usb_interface *intf) return 0; mutex_lock(&acm->mutex); - if (acm->used) { + if (acm->port.count) { rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); if (rv < 0) goto err_out; @@ -1434,6 +1465,7 @@ static struct usb_driver acm_driver = { static const struct tty_operations acm_ops = { .open = acm_tty_open, .close = acm_tty_close, + .hangup = acm_tty_hangup, .write = acm_tty_write, .write_room = acm_tty_write_room, .ioctl = acm_tty_ioctl, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 19967cdb269..4c3856420ad 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -89,7 +89,6 @@ struct acm { struct usb_device *dev; /* the corresponding usb device */ struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ - struct tty_struct *tty; /* the corresponding tty */ struct tty_port port; /* our tty port data */ struct urb *ctrlurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ @@ -121,7 +120,6 @@ struct acm { unsigned int ctrlout; /* output control lines (DTR, RTS) */ unsigned int writesize; /* max packet size for the output bulk endpoint */ unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ - unsigned int used; /* someone has this acm's device open */ unsigned int minor; /* acm minor number */ unsigned char throttle; /* throttled by tty layer */ unsigned char clocal; /* termios CLOCAL */ -- cgit v1.2.3-18-g5258 From 6e47e069eb4dffa88ad91ddfc3fd85f32c35654b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:37:06 +0100 Subject: tty: Clean up the ACM driver to CodingStyle Or at least most of it. There are further clean ups possible and there are are also thing checkpatch moans about that would be silly to "fix". Also note some FIXME points found as the cleanup was done. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 291 ++++++++++++++++++++++++-------------------- 1 file changed, 160 insertions(+), 131 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b4e73aa759d..ddeb6919253 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -16,7 +16,8 @@ * v0.9 - thorough cleaning, URBification, almost a rewrite * v0.10 - some more cleanups * v0.11 - fixed flow control, read error doesn't stop reads - * v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced + * v0.12 - added TIOCM ioctls, added break handling, made struct acm + * kmalloced * v0.13 - added termios, added hangup * v0.14 - sized down struct acm * v0.15 - fixed flow control again - characters could be lost @@ -102,13 +103,15 @@ static const struct tty_port_operations acm_port_ops = { * Functions for ACM control messages. */ -static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len) +static int acm_ctrl_msg(struct acm *acm, int request, int value, + void *buf, int len) { int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), request, USB_RT_ACM, value, acm->control->altsetting[0].desc.bInterfaceNumber, buf, len, 5000); - dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval); + dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", + request, value, len, retval); return retval < 0 ? retval : 0; } @@ -153,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm) n = ACM_NW; spin_lock_irqsave(&acm->write_lock, flags); - for (i = 0; i < ACM_NW; i++) { + for (i = 0; i < ACM_NW; i++) n -= acm->wb[i].use; - } spin_unlock_irqrestore(&acm->write_lock, flags); return n; } @@ -186,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb) wb->urb->transfer_buffer_length = wb->len; wb->urb->dev = acm->dev; - if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) { + rc = usb_submit_urb(wb->urb, GFP_ATOMIC); + if (rc < 0) { dbg("usb_submit_urb(write bulk) failed: %d", rc); acm_write_done(acm, wb); } @@ -291,44 +294,45 @@ static void acm_ctrl_irq(struct urb *urb) data = (unsigned char *)(dr + 1); switch (dr->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + dbg("%s network", dr->wValue ? + "connected to" : "disconnected from"); + break; - case USB_CDC_NOTIFY_NETWORK_CONNECTION: + case USB_CDC_NOTIFY_SERIAL_STATE: + tty = tty_port_tty_get(&acm->port); + newctrl = get_unaligned_le16(data); - dbg("%s network", dr->wValue ? "connected to" : "disconnected from"); - break; - - case USB_CDC_NOTIFY_SERIAL_STATE: - tty = tty_port_tty_get(&acm->port); - newctrl = get_unaligned_le16(data); - - if (tty) { - if (!acm->clocal && - (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { - dbg("calling hangup"); - tty_hangup(tty); - } - tty_kref_put(tty); + if (tty) { + if (!acm->clocal && + (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dbg("calling hangup"); + tty_hangup(tty); } + tty_kref_put(tty); + } - acm->ctrlin = newctrl; - - dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", - acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', - acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', acm->ctrlin & ACM_CTRL_RI ? '+' : '-', - acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', - acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); + acm->ctrlin = newctrl; + dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", + acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', + acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', + acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', + acm->ctrlin & ACM_CTRL_RI ? '+' : '-', + acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', + acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', + acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); break; - default: - dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", - dr->bNotificationType, dr->wIndex, - dr->wLength, data[0], data[1]); - break; + default: + dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", + dr->bNotificationType, dr->wIndex, + dr->wLength, data[0], data[1]); + break; } exit: usb_mark_last_busy(acm->dev); - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with " "result %d", __func__, retval); @@ -466,10 +470,11 @@ urbs: rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* This shouldn't kill the driver as unsuccessful URBs are returned to the - free-urbs-pool and resubmited ASAP */ + /* This shouldn't kill the driver as unsuccessful URBs are + returned to the free-urbs-pool and resubmited ASAP */ spin_lock_irqsave(&acm->read_lock, flags); - if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { + if (acm->susp_count || + usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { list_add(&buf->list, &acm->spare_read_bufs); list_add(&rcv->list, &acm->spare_read_urbs); acm->processing = 0; @@ -588,12 +593,11 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) INIT_LIST_HEAD(&acm->spare_read_urbs); INIT_LIST_HEAD(&acm->spare_read_bufs); INIT_LIST_HEAD(&acm->filled_read_bufs); - for (i = 0; i < acm->rx_buflimit; i++) { + + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->ru[i].list), &acm->spare_read_urbs); - } - for (i = 0; i < acm->rx_buflimit; i++) { + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->rb[i].list), &acm->spare_read_bufs); - } acm->throttle = 0; @@ -684,7 +688,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&open_mutex); } -static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int acm_tty_write(struct tty_struct *tty, + const unsigned char *buf, int count) { struct acm *acm = tty->driver_data; int stat; @@ -700,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c return 0; spin_lock_irqsave(&acm->write_lock, flags); - if ((wbn = acm_wb_alloc(acm)) < 0) { + wbn = acm_wb_alloc(acm); + if (wbn < 0) { spin_unlock_irqrestore(&acm->write_lock, flags); return 0; } @@ -712,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c wb->len = count; spin_unlock_irqrestore(&acm->write_lock, flags); - if ((stat = acm_write_start(acm, wbn)) < 0) + stat = acm_write_start(acm, wbn); + if (stat < 0) return stat; return count; } @@ -798,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return -EINVAL; newctrl = acm->ctrlout; - set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); - clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); + set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); + clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); newctrl = (newctrl & ~clear) | set; @@ -808,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return acm_set_control(acm, acm->ctrlout = newctrl); } -static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct acm *acm = tty->driver_data; @@ -830,7 +840,8 @@ static const __u8 acm_tty_size[] = { 5, 6, 7, 8 }; -static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old) { struct acm *acm = tty->driver_data; struct ktermios *termios = tty->termios; @@ -840,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios if (!ACM_READY(acm)) return; + /* FIXME: Needs to support the tty_baud interface */ + /* FIXME: Broken on sparc */ newline.dwDTERate = cpu_to_le32p(acm_tty_speed + (termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0)); newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0; newline.bParityType = termios->c_cflag & PARENB ? - (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + (termios->c_cflag & PARODD ? 1 : 2) + + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; - + /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); if (!newline.dwDTERate) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else newctrl |= ACM_CTRL_DTR; + } else + newctrl |= ACM_CTRL_DTR; if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); @@ -877,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm) struct acm_wb *wb; struct usb_device *usb_dev = interface_to_usbdev(acm->control); - for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { + for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); - } } static void acm_read_buffers_free(struct acm *acm) @@ -888,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm) int i, n = acm->rx_buflimit; for (i = 0; i < n; i++) - usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); + usb_buffer_free(usb_dev, acm->readsize, + acm->rb[i].base, acm->rb[i].dma); } /* Little helper: write buffers allocate */ @@ -928,7 +943,7 @@ static int acm_probe(struct usb_interface *intf, struct usb_device *usb_dev = interface_to_usbdev(intf); struct acm *acm; int minor; - int ctrlsize,readsize; + int ctrlsize, readsize; u8 *buf; u8 ac_management_function = 0; u8 call_management_function = 0; @@ -948,7 +963,7 @@ static int acm_probe(struct usb_interface *intf, control_interface = usb_ifnum_to_if(usb_dev, 0); goto skip_normal_probe; } - + /* normal probing*/ if (!buffer) { dev_err(&intf->dev, "Weird descriptor references\n"); @@ -956,8 +971,10 @@ static int acm_probe(struct usb_interface *intf, } if (!buflen) { - if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) { - dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n"); + if (intf->cur_altsetting->endpoint->extralen && + intf->cur_altsetting->endpoint->extra) { + dev_dbg(&intf->dev, + "Seeking extra descriptors on endpoint\n"); buflen = intf->cur_altsetting->endpoint->extralen; buffer = intf->cur_altsetting->endpoint->extra; } else { @@ -968,47 +985,43 @@ static int acm_probe(struct usb_interface *intf, } while (buflen > 0) { - if (buffer [1] != USB_DT_CS_INTERFACE) { + if (buffer[1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; } - switch (buffer [2]) { - case USB_CDC_UNION_TYPE: /* we've found it */ - if (union_header) { - dev_err(&intf->dev, "More than one " - "union descriptor, " - "skipping ...\n"); - goto next_desc; - } - union_header = (struct usb_cdc_union_desc *) - buffer; - break; - case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ - cfd = (struct usb_cdc_country_functional_desc *)buffer; - break; - case USB_CDC_HEADER_TYPE: /* maybe check version */ - break; /* for now we ignore it */ - case USB_CDC_ACM_TYPE: - ac_management_function = buffer[3]; - break; - case USB_CDC_CALL_MANAGEMENT_TYPE: - call_management_function = buffer[3]; - call_interface_num = buffer[4]; - if ((call_management_function & 3) != 3) - dev_err(&intf->dev, "This device " - "cannot do calls on its own. " - "It is no modem.\n"); - break; - default: - /* there are LOTS more CDC descriptors that - * could legitimately be found here. - */ - dev_dbg(&intf->dev, "Ignoring descriptor: " - "type %02x, length %d\n", - buffer[2], buffer[0]); - break; + switch (buffer[2]) { + case USB_CDC_UNION_TYPE: /* we've found it */ + if (union_header) { + dev_err(&intf->dev, "More than one " + "union descriptor, skipping ...\n"); + goto next_desc; } + union_header = (struct usb_cdc_union_desc *)buffer; + break; + case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ + cfd = (struct usb_cdc_country_functional_desc *)buffer; + break; + case USB_CDC_HEADER_TYPE: /* maybe check version */ + break; /* for now we ignore it */ + case USB_CDC_ACM_TYPE: + ac_management_function = buffer[3]; + break; + case USB_CDC_CALL_MANAGEMENT_TYPE: + call_management_function = buffer[3]; + call_interface_num = buffer[4]; + if ((call_management_function & 3) != 3) + dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); + break; + default: + /* there are LOTS more CDC descriptors that + * could legitimately be found here. + */ + dev_dbg(&intf->dev, "Ignoring descriptor: " + "type %02x, length %d\n", + buffer[2], buffer[0]); + break; + } next_desc: buflen -= buffer[0]; buffer += buffer[0]; @@ -1016,33 +1029,36 @@ next_desc: if (!union_header) { if (call_interface_num > 0) { - dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n"); + dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); control_interface = intf; } else { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + dev_dbg(&intf->dev, + "No union descriptor, giving up\n"); return -ENODEV; } } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); if (!control_interface || !data_interface) { - dev_dbg(&intf->dev,"no interfaces\n"); + dev_dbg(&intf->dev, "no interfaces\n"); return -ENODEV; } } - + if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); skip_normal_probe: /*workaround for switched interfaces */ - if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) { - if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { + if (data_interface->cur_altsetting->desc.bInterfaceClass + != CDC_DATA_INTERFACE_TYPE) { + if (control_interface->cur_altsetting->desc.bInterfaceClass + == CDC_DATA_INTERFACE_TYPE) { struct usb_interface *t; - dev_dbg(&intf->dev,"Your device has switched interfaces.\n"); - + dev_dbg(&intf->dev, + "Your device has switched interfaces.\n"); t = control_interface; control_interface = data_interface; data_interface = t; @@ -1054,9 +1070,9 @@ skip_normal_probe: /* Accept probe requests only for the control interface */ if (intf != control_interface) return -ENODEV; - + if (usb_interface_claimed(data_interface)) { /* valid in this context */ - dev_dbg(&intf->dev,"The data interface isn't available\n"); + dev_dbg(&intf->dev, "The data interface isn't available\n"); return -EBUSY; } @@ -1073,8 +1089,8 @@ skip_normal_probe: if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; - dev_dbg(&intf->dev,"The data interface has switched endpoints\n"); - + dev_dbg(&intf->dev, + "The data interface has switched endpoints\n"); t = epread; epread = epwrite; epwrite = t; @@ -1087,13 +1103,15 @@ skip_normal_probe: return -ENODEV; } - if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { + acm = kzalloc(sizeof(struct acm), GFP_KERNEL); + if (acm == NULL) { dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); goto alloc_fail; } ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2); + readsize = le16_to_cpu(epread->wMaxPacketSize) * + (quirks == SINGLE_RX_URB ? 1 : 2); acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; acm->control = control_interface; acm->data = data_interface; @@ -1136,8 +1154,10 @@ skip_normal_probe: for (i = 0; i < num_rx_buf; i++) { struct acm_ru *rcv = &(acm->ru[i]); - if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + rcv->urb = usb_alloc_urb(0, GFP_KERNEL); + if (rcv->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (read urbs usb_alloc_urb)\n"); goto alloc_fail7; } @@ -1150,26 +1170,29 @@ skip_normal_probe: rb->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &rb->dma); if (!rb->base) { - dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + dev_dbg(&intf->dev, + "out of memory (read bufs usb_buffer_alloc)\n"); goto alloc_fail7; } } - for(i = 0; i < ACM_NW; i++) - { + for (i = 0; i < ACM_NW; i++) { struct acm_wb *snd = &(acm->wb[i]); - if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)"); + snd->urb = usb_alloc_urb(0, GFP_KERNEL); + if (snd->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (write urbs usb_alloc_urb)"); goto alloc_fail7; } - usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), - NULL, acm->writesize, acm_write_bulk, snd); + usb_fill_bulk_urb(snd->urb, usb_dev, + usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; snd->instance = acm; } - usb_set_intfdata (intf, acm); + usb_set_intfdata(intf, acm); i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); if (i < 0) @@ -1180,7 +1203,8 @@ skip_normal_probe: if (!acm->country_codes) goto skip_countries; acm->country_code_size = cfd->bLength - 4; - memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4); + memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, + cfd->bLength - 4); acm->country_rel_date = cfd->iCountryCodeRelDate; i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); @@ -1189,7 +1213,8 @@ skip_normal_probe: goto skip_countries; } - i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + i = device_create_file(&intf->dev, + &dev_attr_iCountryCodeRelDate); if (i < 0) { kfree(acm->country_codes); goto skip_countries; @@ -1197,8 +1222,10 @@ skip_normal_probe: } skip_countries: - usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), - acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval); + usb_fill_int_urb(acm->ctrlurb, usb_dev, + usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), + acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, + epctrl->bInterval); acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; @@ -1245,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm) tasklet_disable(&acm->urb_task); usb_kill_urb(acm->ctrlurb); - for(i = 0; i < ACM_NW; i++) + for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->ru[i].urb); @@ -1267,7 +1294,7 @@ static void acm_disconnect(struct usb_interface *intf) return; mutex_lock(&open_mutex); - if (acm->country_codes){ + if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, @@ -1281,7 +1308,8 @@ static void acm_disconnect(struct usb_interface *intf) stop_data_traffic(acm); acm_write_buffers_free(acm); - usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, + acm->ctrl_dma); acm_read_buffers_free(acm); usb_driver_release_interface(&acm_driver, intf == acm->control ? @@ -1434,7 +1462,7 @@ static struct usb_device_id acm_ids[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_GSM) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, - USB_CDC_ACM_PROTO_AT_3G ) }, + USB_CDC_ACM_PROTO_AT_3G) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_CDMA) }, @@ -1442,7 +1470,7 @@ static struct usb_device_id acm_ids[] = { { } }; -MODULE_DEVICE_TABLE (usb, acm_ids); +MODULE_DEVICE_TABLE(usb, acm_ids); static struct usb_driver acm_driver = { .name = "cdc_acm", @@ -1497,7 +1525,8 @@ static int __init acm_init(void) acm_tty_driver->subtype = SERIAL_TYPE_NORMAL, acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; acm_tty_driver->init_termios = tty_std_termios; - acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; tty_set_operations(acm_tty_driver, &acm_ops); retval = tty_register_driver(acm_tty_driver); @@ -1529,7 +1558,7 @@ static void __exit acm_exit(void) module_init(acm_init); module_exit(acm_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR); -- cgit v1.2.3-18-g5258 From a391ad0f09014856bbc4eeea309593eba977b3b0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:40:17 +0100 Subject: rocket: fix test_bit parameters Switch from ASYNC_* to ASYNCB_*, because {test,set}_bit expect bit number, not mask. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/rocket.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 7399188049d..63d5b628477 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -939,7 +939,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -963,7 +963,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - set_bit(ASYNC_INITIALIZED, &info->port.flags); + set_bit(ASYNCB_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge @@ -1646,7 +1646,7 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { /* Hung up ? */ - if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) + if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); -- cgit v1.2.3-18-g5258 From c3301a5c04800bcf8afc8a815bf9e570a4e25a08 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:41:05 +0100 Subject: epca: fix test_bit parameters Switch from ASYNC_* to ASYNCB_*, because test_bit expects bit number, not mask. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/epca.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 8797b774235..710ee933305 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1518,7 +1518,7 @@ static void doevent(int crd) if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { + if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1765,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - clear_bit(ASYNC_CHECK_CD, &ch->port.flags); + clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); else - set_bit(ASYNC_CHECK_CD, &ch->port.flags); + set_bit(ASYNCB_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -2244,7 +2244,8 @@ static void do_softint(struct work_struct *work) if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); + clear_bit(ASYNCB_NORMAL_ACTIVE, + &ch->port.flags); } } tty_kref_put(tty); -- cgit v1.2.3-18-g5258 From 70fd8fdecc4430ffcede7704dd812d4054d1faf9 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 11 Jun 2009 12:41:57 +0100 Subject: 8250_pci: add the OXCB950 chip to the 8250 PCI driver. This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: Andre Przywara Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 938bc1b6c3f..e371a9c1534 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_OXSEMI, 0x950a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_115200 }, -- cgit v1.2.3-18-g5258 From 38db89799bdf11625a831c5af33938dcb11908b6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:44:17 +0100 Subject: tty: throttling race fix The tty throttling code can race due to the lock drops. It takes very high loads but this has been observed and verified by Rob Duncan. The basic problem is that on an SMP box we can go CPU #1 CPU #2 need to throttle ? suppose we should buffer space cleared are we throttled yes ? - unthrottle call throttle method This changeet take the termios lock to protect against this. The termios lock isn't the initial obvious candidate but many implementations of throttle methods already need to poke around their own termios structures (and nobody really locks them against a racing change of flow control). This does mean that anyone who is setting tty->low_latency = 1 and then calling tty_flip_buffer_push from their unthrottle method is going to end up collapsing in a pile of locks. However we've removed all the known bogus users of low_latency = 1 and such use isn't safe anyway for other reasons so catching it would be an improvement. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ioctl.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 6f4c7d0a53b..2401dbcbee9 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -97,14 +97,19 @@ EXPORT_SYMBOL(tty_driver_flush_buffer); * @tty: terminal * * Indicate that a tty should stop transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. */ void tty_throttle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); /* check TTY_THROTTLED first so it indicates our state */ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && tty->ops->throttle) tty->ops->throttle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_throttle); @@ -113,13 +118,21 @@ EXPORT_SYMBOL(tty_throttle); * @tty: terminal * * Indicate that a tty may continue transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. + * + * Drivers should however remember that the stack can issue a throttle, + * then change flow control method, then unthrottle. */ void tty_unthrottle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) && tty->ops->unthrottle) tty->ops->unthrottle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_unthrottle); -- cgit v1.2.3-18-g5258 From 620df3c0a5b70656c4de6049825de214f108218e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:45:53 +0100 Subject: pty: Fix a comment We fixed the globals, so now fix the comment Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/pty.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 31038a0052a..da2cb8c70c1 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -30,7 +30,6 @@ #include -/* These are global because they are accessed in tty_io.c */ #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; static struct tty_driver *pts_driver; -- cgit v1.2.3-18-g5258 From 5f0878acba7db24323f5ba4055ec9a96895bb150 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:46:41 +0100 Subject: tty: Fix oops when scanning the polling list for kgdb Costantino Leandro found a bug in tty_find_polling_driver and provided a patch that fixed the crash but not the underlying bug. This fixes the underlying bug where the list walk corrupts the values it is using on a match but then reuses them if the open fails. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 66b99a2049e..6c817398232 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -295,7 +295,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) struct tty_driver *p, *res = NULL; int tty_line = 0; int len; - char *str; + char *str, *stp; for (str = name; *str; str++) if ((*str >= '0' && *str <= '9') || *str == ',') @@ -311,13 +311,14 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) list_for_each_entry(p, &tty_drivers, tty_drivers) { if (strncmp(name, p->name, len) != 0) continue; - if (*str == ',') - str++; - if (*str == '\0') - str = NULL; + stp = str; + if (*stp == ',') + stp++; + if (*stp == '\0') + stp = NULL; if (tty_line >= 0 && tty_line <= p->num && p->ops && - p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) { + p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) { res = tty_driver_kref_get(p); *line = tty_line; break; -- cgit v1.2.3-18-g5258 From e8b70e7d3e86319a8b2aaabde3866833d92cd80f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:48:02 +0100 Subject: tty: Extract various bits of ldisc code Before trying to tackle the ldisc bugs the code needs to be a good deal more readable, so do the simple extractions of routines first. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 24 +++++++++--- drivers/char/tty_ldisc.c | 97 ++++++++++++++++++++++++++++++++---------------- 2 files changed, 85 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 6c817398232..be49d0730bb 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2481,6 +2481,24 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int return tty->ops->tiocmset(tty, file, set, clear); } +struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + tty = tty->link; + return tty; +} +EXPORT_SYMBOL(tty_pair_get_tty); + +struct tty_struct *tty_pair_get_pty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + return tty; + return tty->link; +} +EXPORT_SYMBOL(tty_pair_get_pty); + /* * Split this up, as gcc can choke on it otherwise.. */ @@ -2496,11 +2514,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; - real_tty = tty; - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER) - real_tty = tty->link; - + real_tty = tty_pair_get_tty(tty); /* * Factor out some common prep work diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f78f5b0127a..e3c6416aa86 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -443,6 +443,50 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) } } +/** + * tty_ldisc_halt - shutdown the line discipline + * @tty: tty device + * + * Shut down the line discipline and work queue for this tty device. + * The TTY_LDISC flag being cleared ensures no further references can + * be obtained while the delayed work queue halt ensures that no more + * data is fed to the ldisc. + * + * In order to wait for any existing references to complete see + * tty_ldisc_wait_idle. + */ + +static void tty_ldisc_halt(struct tty_struct *tty) +{ + clear_bit(TTY_LDISC, &tty->flags); + cancel_delayed_work(&tty->buf.work); + /* + * Wait for ->hangup_work and ->buf.work handlers to terminate + */ + flush_scheduled_work(); +} + +/** + * tty_ldisc_wait_idle - wait for the ldisc to become idle + * @tty: tty to wait for + * + * Wait for the line discipline to become idle. The discipline must + * have been halted for this to guarantee it remains idle. + * + */ + +static void tty_ldisc_wait_idle(struct tty_struct *tty) +{ + unsigned long flags; + spin_lock_irqsave(&tty_ldisc_lock, flags); + while (tty->ldisc.refcount) { + spin_unlock_irqrestore(&tty_ldisc_lock, flags); + wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); + spin_lock_irqsave(&tty_ldisc_lock, flags); + } + spin_unlock_irqrestore(&tty_ldisc_lock, flags); +} + /** * tty_set_ldisc - set line discipline * @tty: the terminal to set @@ -636,6 +680,21 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) return 0; } +static void tty_ldisc_reinit(struct tty_struct *tty) +{ + struct tty_ldisc ld; + + if (tty->ldisc.ops->close) + (tty->ldisc.ops->close)(tty); + tty_ldisc_put(tty->ldisc.ops); + /* + * Switch the line discipline back + */ + WARN_ON(tty_ldisc_get(N_TTY, &ld)); + tty_ldisc_assign(tty, &ld); + tty_set_termios_ldisc(tty, N_TTY); +} + /** * tty_ldisc_release - release line discipline * @tty: tty being shut down @@ -647,58 +706,34 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) { - unsigned long flags; - struct tty_ldisc ld; + /* * Prevent flush_to_ldisc() from rescheduling the work for later. Then * kill any delayed work. As this is the final close it does not * race with the set_ldisc code path. */ - clear_bit(TTY_LDISC, &tty->flags); - cancel_delayed_work(&tty->buf.work); - /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - */ - - flush_scheduled_work(); + tty_ldisc_halt(tty); /* * Wait for any short term users (we know they are just driver * side waiters as the file is closing so user count on the file * side is zero. */ - spin_lock_irqsave(&tty_ldisc_lock, flags); - while (tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); - spin_lock_irqsave(&tty_ldisc_lock, flags); - } - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + + tty_ldisc_wait_idle(tty); + /* * Shutdown the current line discipline, and reset it to N_TTY. * * FIXME: this MUST get fixed for the new reflocking */ - if (tty->ldisc.ops->close) - (tty->ldisc.ops->close)(tty); - tty_ldisc_put(tty->ldisc.ops); - /* - * Switch the line discipline back - */ - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(tty, &ld); - tty_set_termios_ldisc(tty, N_TTY); + tty_ldisc_reinit(tty); if (o_tty) { /* FIXME: could o_tty be in setldisc here ? */ clear_bit(TTY_LDISC, &o_tty->flags); - if (o_tty->ldisc.ops->close) - (o_tty->ldisc.ops->close)(o_tty); - tty_ldisc_put(o_tty->ldisc.ops); - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(o_tty, &ld); - tty_set_termios_ldisc(o_tty, N_TTY); + tty_ldisc_reinit(o_tty); } } -- cgit v1.2.3-18-g5258 From c65c9bc3efa5589f691276bb9db689119a711222 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:50:12 +0100 Subject: tty: rewrite the ldisc locking There are several pretty much unfixable races in the old ldisc code, especially with respect to pty behaviour and also to hangup. It's easier to rewrite the code than simply try and patch it up. This patch - splits the ldisc from the tty (so we will be able to refcount it more cleanly later) - introduces a mutex lock for ldisc changing on an active device - fixes the complete mess that hangup caused - implements hopefully correct setldisc/close/hangup locking There are still some problems around pty pairs that have always been there but at least it is now possible to understand the code and fix further problems. This fixes the following known bugs - hang up can leak ldisc references - hang up may not call open/close on ldisc in a matched way - pty/tty pairs can deadlock during an ldisc change - reading the ldisc proc files can cause every ldisc to be loaded and probably a few other of the mysterious ldisc race reports. I'm sure it also adds the odd new one. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ldisc.c | 4 +- drivers/char/cyclades.c | 2 +- drivers/char/epca.c | 4 +- drivers/char/ip2/i2lib.c | 4 +- drivers/char/ip2/ip2main.c | 4 +- drivers/char/n_hdlc.c | 4 +- drivers/char/pty.c | 10 +- drivers/char/selection.c | 2 +- drivers/char/tty_io.c | 64 +----- drivers/char/tty_ldisc.c | 477 ++++++++++++++++++++++++++---------------- 10 files changed, 323 insertions(+), 252 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index af761dc434f..68801512859 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -277,8 +277,8 @@ static int hci_uart_tty_open(struct tty_struct *tty) /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); return 0; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 45601905174..f3366d3f06c 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5200,7 +5200,7 @@ static int cyclades_proc_show(struct seq_file *m, void *v) (cur_jifs - info->idle_stats.recv_idle)/ HZ, info->idle_stats.overruns, /* FIXME: double check locking */ - (long)info->port.tty->ldisc.ops->num); + (long)info->port.tty->ldisc->ops->num); else seq_printf(m, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 710ee933305..abef1f7d84f 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -2114,8 +2114,8 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, tty_wait_until_sent(tty, 0); } else { /* ldisc lock already held in ioctl */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); } unlock_kernel(); /* Fall Thru */ diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c index 0061e18aff6..0d10b89218e 100644 --- a/drivers/char/ip2/i2lib.c +++ b/drivers/char/ip2/i2lib.c @@ -868,11 +868,11 @@ i2Input(i2ChanStrPtr pCh) amountToMove = count; } // Move the first block - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); // If we needed to wrap, do the second data move if (count > amountToMove) { - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, pCh->Ibuf, NULL, count - amountToMove ); } // Bump and wrap the stripIndex all at once by the amount of data read. This diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index afd9247cf08..517271c762e 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1315,8 +1315,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush) if (tty->pgrp) kill_pgrp(tty->pgrp, sig, 1); if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc.ops->flush_buffer ) - tty->ldisc.ops->flush_buffer(tty); + if ( tty->ldisc->ops->flush_buffer ) + tty->ldisc->ops->flush_buffer(tty); i2InputFlush( tty->driver_data ); } } diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index bacb3e2872a..461ece591a5 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -342,8 +342,8 @@ static int n_hdlc_tty_open (struct tty_struct *tty) #endif /* Flush any pending characters in the driver and discipline. */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); diff --git a/drivers/char/pty.c b/drivers/char/pty.c index da2cb8c70c1..5acd29e6e04 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -110,7 +110,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, c = to->receive_room; if (c > count) c = count; - to->ldisc.ops->receive_buf(to, buf, NULL, c); + to->ldisc->ops->receive_buf(to, buf, NULL, c); return c; } @@ -148,11 +148,11 @@ static int pty_chars_in_buffer(struct tty_struct *tty) int count; /* We should get the line discipline lock for "tty->link" */ - if (!to || !to->ldisc.ops->chars_in_buffer) + if (!to || !to->ldisc->ops->chars_in_buffer) return 0; /* The ldisc must report 0 if no characters available to be read */ - count = to->ldisc.ops->chars_in_buffer(to); + count = to->ldisc->ops->chars_in_buffer(to); if (tty->driver->subtype == PTY_TYPE_SLAVE) return count; @@ -186,8 +186,8 @@ static void pty_flush_buffer(struct tty_struct *tty) if (!to) return; - if (to->ldisc.ops->flush_buffer) - to->ldisc.ops->flush_buffer(to); + if (to->ldisc->ops->flush_buffer) + to->ldisc->ops->flush_buffer(to); if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); diff --git a/drivers/char/selection.c b/drivers/char/selection.c index cb8ca569896..f97b9e84806 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -327,7 +327,7 @@ int paste_selection(struct tty_struct *tty) } count = sel_buffer_lth - pasted; count = min(count, tty->receive_room); - tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted, + tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index be49d0730bb..2f44b0b241c 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -491,22 +491,6 @@ void tty_ldisc_flush(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_ldisc_flush); -/** - * tty_reset_termios - reset terminal state - * @tty: tty to reset - * - * Restore a terminal to the driver default state - */ - -static void tty_reset_termios(struct tty_struct *tty) -{ - mutex_lock(&tty->termios_mutex); - *tty->termios = tty->driver->init_termios; - tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); - tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); - mutex_unlock(&tty->termios_mutex); -} - /** * do_tty_hangup - actual handler for hangup events * @work: tty device @@ -536,7 +520,6 @@ static void do_tty_hangup(struct work_struct *work) struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; - struct tty_ldisc *ld; int closecount = 0, n; unsigned long flags; int refs = 0; @@ -567,40 +550,8 @@ static void do_tty_hangup(struct work_struct *work) filp->f_op = &hung_up_tty_fops; } file_list_unlock(); - /* - * FIXME! What are the locking issues here? This may me overdoing - * things... This question is especially important now that we've - * removed the irqlock. - */ - ld = tty_ldisc_ref(tty); - if (ld != NULL) { - /* We may have no line discipline at this point */ - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_driver_flush_buffer(tty); - if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && - ld->ops->write_wakeup) - ld->ops->write_wakeup(tty); - if (ld->ops->hangup) - ld->ops->hangup(tty); - } - /* - * FIXME: Once we trust the LDISC code better we can wait here for - * ldisc completion and fix the driver call race - */ - wake_up_interruptible_poll(&tty->write_wait, POLLOUT); - wake_up_interruptible_poll(&tty->read_wait, POLLIN); - /* - * Shutdown the current line discipline, and reset it to - * N_TTY. - */ - if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) - tty_reset_termios(tty); - /* Defer ldisc switch */ - /* tty_deferred_ldisc_switch(N_TTY); - This should get done automatically when the port closes and - tty_release is called */ + tty_ldisc_hangup(tty); read_lock(&tasklist_lock); if (tty->session) { @@ -629,12 +580,15 @@ static void do_tty_hangup(struct work_struct *work) read_unlock(&tasklist_lock); spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->flags = 0; + clear_bit(TTY_THROTTLED, &tty->flags); + clear_bit(TTY_PUSH, &tty->flags); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); put_pid(tty->session); put_pid(tty->pgrp); tty->session = NULL; tty->pgrp = NULL; tty->ctrl_status = 0; + set_bit(TTY_HUPPED, &tty->flags); spin_unlock_irqrestore(&tty->ctrl_lock, flags); /* Account for the p->signal references we killed */ @@ -660,10 +614,7 @@ static void do_tty_hangup(struct work_struct *work) * can't yet guarantee all that. */ set_bit(TTY_HUPPED, &tty->flags); - if (ld) { - tty_ldisc_enable(tty); - tty_ldisc_deref(ld); - } + tty_ldisc_enable(tty); unlock_kernel(); if (f) fput(f); @@ -2570,7 +2521,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGSID: return tiocgsid(tty, real_tty, p); case TIOCGETD: - return put_user(tty->ldisc.ops->num, (int __user *)p); + return put_user(tty->ldisc->ops->num, (int __user *)p); case TIOCSETD: return tiocsetd(tty, p); /* @@ -2785,6 +2736,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->buf.head = tty->buf.tail = NULL; tty_buffer_init(tty); mutex_init(&tty->termios_mutex); + mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index e3c6416aa86..a58a19a6a5e 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -115,19 +115,22 @@ EXPORT_SYMBOL(tty_unregister_ldisc); /** * tty_ldisc_try_get - try and reference an ldisc * @disc: ldisc number - * @ld: tty ldisc structure to complete * * Attempt to open and lock a line discipline into place. Return - * the line discipline refcounted and assigned in ld. On an error - * report the error code back + * the line discipline refcounted or an error. */ -static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_try_get(int disc) { unsigned long flags; + struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; int err = -EINVAL; + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL); + if (ld == NULL) + return ERR_PTR(-ENOMEM); + spin_lock_irqsave(&tty_ldisc_lock, flags); ld->ops = NULL; ldops = tty_ldiscs[disc]; @@ -140,17 +143,19 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) /* lock it */ ldops->refcount++; ld->ops = ldops; + ld->refcount = 0; err = 0; } } spin_unlock_irqrestore(&tty_ldisc_lock, flags); - return err; + if (err) + return ERR_PTR(err); + return ld; } /** * tty_ldisc_get - take a reference to an ldisc * @disc: ldisc number - * @ld: tty line discipline structure to use * * Takes a reference to a line discipline. Deals with refcounts and * module locking counts. Returns NULL if the discipline is not available. @@ -161,44 +166,46 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) * takes tty_ldisc_lock to guard against ldisc races */ -static int tty_ldisc_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_get(int disc) { - int err; + struct tty_ldisc *ld; if (disc < N_TTY || disc >= NR_LDISCS) - return -EINVAL; - err = tty_ldisc_try_get(disc, ld); - if (err < 0) { + return ERR_PTR(-EINVAL); + ld = tty_ldisc_try_get(disc); + if (IS_ERR(ld)) { request_module("tty-ldisc-%d", disc); - err = tty_ldisc_try_get(disc, ld); + ld = tty_ldisc_try_get(disc); } - return err; + return ld; } /** * tty_ldisc_put - drop ldisc reference - * @disc: ldisc number + * @ld: ldisc * * Drop a reference to a line discipline. Manage refcounts and - * module usage counts + * module usage counts. Free the ldisc once the recount hits zero. * * Locking: * takes tty_ldisc_lock to guard against ldisc races */ -static void tty_ldisc_put(struct tty_ldisc_ops *ld) +static void tty_ldisc_put(struct tty_ldisc *ld) { unsigned long flags; - int disc = ld->num; + int disc = ld->ops->num; + struct tty_ldisc_ops *ldo; BUG_ON(disc < N_TTY || disc >= NR_LDISCS); spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = tty_ldiscs[disc]; - BUG_ON(ld->refcount == 0); - ld->refcount--; - module_put(ld->owner); + ldo = tty_ldiscs[disc]; + BUG_ON(ldo->refcount == 0); + ldo->refcount--; + module_put(ldo->owner); spin_unlock_irqrestore(&tty_ldisc_lock, flags); + kfree(ld); } static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) @@ -219,12 +226,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v) static int tty_ldiscs_seq_show(struct seq_file *m, void *v) { int i = *(loff_t *)v; - struct tty_ldisc ld; + struct tty_ldisc *ld; - if (tty_ldisc_get(i, &ld) < 0) + ld = tty_ldisc_try_get(i); + if (IS_ERR(ld)) return 0; - seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i); - tty_ldisc_put(ld.ops); + seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i); + tty_ldisc_put(ld); return 0; } @@ -263,8 +271,7 @@ const struct file_operations tty_ldiscs_proc_fops = { static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld) { - ld->refcount = 0; - tty->ldisc = *ld; + tty->ldisc = ld; } /** @@ -286,7 +293,7 @@ static int tty_ldisc_try(struct tty_struct *tty) int ret = 0; spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = &tty->ldisc; + ld = tty->ldisc; if (test_bit(TTY_LDISC, &tty->flags)) { ld->refcount++; ret = 1; @@ -315,8 +322,8 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - WARN_ON(tty->ldisc.refcount == 0); - return &tty->ldisc; + WARN_ON(tty->ldisc->refcount == 0); + return tty->ldisc; } EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); @@ -335,7 +342,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) { if (tty_ldisc_try(tty)) - return &tty->ldisc; + return tty->ldisc; return NULL; } @@ -407,6 +414,39 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) mutex_unlock(&tty->termios_mutex); } +/** + * tty_ldisc_open - open a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to open + * + * A helper opening method. Also a convenient debugging and check + * point. + */ + +static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); + if (ld->ops->open) + return ld->ops->open(tty); + return 0; +} + +/** + * tty_ldisc_close - close a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to close + * + * A helper close method. Also a convenient debugging and check + * point. + */ + +static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags)); + clear_bit(TTY_LDISC_OPEN, &tty->flags); + if (ld->ops->close) + ld->ops->close(tty); +} /** * tty_ldisc_restore - helper for tty ldisc change @@ -420,31 +460,32 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { char buf[64]; - struct tty_ldisc new_ldisc; + struct tty_ldisc *new_ldisc; + int r; /* There is an outstanding reference here so this is safe */ - tty_ldisc_get(old->ops->num, old); + old = tty_ldisc_get(old->ops->num); + WARN_ON(IS_ERR(old)); tty_ldisc_assign(tty, old); tty_set_termios_ldisc(tty, old->ops->num); - if (old->ops->open && (old->ops->open(tty) < 0)) { - tty_ldisc_put(old->ops); + if (tty_ldisc_open(tty, old) < 0) { + tty_ldisc_put(old); /* This driver is always present */ - if (tty_ldisc_get(N_TTY, &new_ldisc) < 0) + new_ldisc =tty_ldisc_get(N_TTY); + if (IS_ERR(new_ldisc)) panic("n_tty: get"); - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, N_TTY); - if (new_ldisc.ops->open) { - int r = new_ldisc.ops->open(tty); - if (r < 0) - panic("Couldn't open N_TTY ldisc for " - "%s --- error %d.", - tty_name(tty, buf), r); - } + r = tty_ldisc_open(tty, new_ldisc); + if (r < 0) + panic("Couldn't open N_TTY ldisc for " + "%s --- error %d.", + tty_name(tty, buf), r); } } /** - * tty_ldisc_halt - shutdown the line discipline + * tty_ldisc_halt - shut down the line discipline * @tty: tty device * * Shut down the line discipline and work queue for this tty device. @@ -456,14 +497,10 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) * tty_ldisc_wait_idle. */ -static void tty_ldisc_halt(struct tty_struct *tty) +static int tty_ldisc_halt(struct tty_struct *tty) { clear_bit(TTY_LDISC, &tty->flags); - cancel_delayed_work(&tty->buf.work); - /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - */ - flush_scheduled_work(); + return cancel_delayed_work(&tty->buf.work); } /** @@ -473,18 +510,22 @@ static void tty_ldisc_halt(struct tty_struct *tty) * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. * + * tty_ldisc_lock protects the ref counts currently. */ -static void tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty) { unsigned long flags; spin_lock_irqsave(&tty_ldisc_lock, flags); - while (tty->ldisc.refcount) { + while (tty->ldisc->refcount) { spin_unlock_irqrestore(&tty_ldisc_lock, flags); - wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); + if (wait_event_timeout(tty_ldisc_wait, + tty->ldisc->refcount == 0, 5 * HZ) == 0) + return -EBUSY; spin_lock_irqsave(&tty_ldisc_lock, flags); } spin_unlock_irqrestore(&tty_ldisc_lock, flags); + return 0; } /** @@ -493,38 +534,63 @@ static void tty_ldisc_wait_idle(struct tty_struct *tty) * @ldisc: the line discipline * * Set the discipline of a tty line. Must be called from a process - * context. + * context. The ldisc change logic has to protect itself against any + * overlapping ldisc change (including on the other end of pty pairs), + * the close of one side of a tty/pty pair, and eventually hangup. * - * Locking: takes tty_ldisc_lock. - * called functions take termios_mutex + * Locking: takes tty_ldisc_lock, termios_mutex */ int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval; - struct tty_ldisc o_ldisc, new_ldisc; - int work; - unsigned long flags; + struct tty_ldisc *o_ldisc, *new_ldisc; + int work, o_work = 0; struct tty_struct *o_tty; -restart: - /* This is a bit ugly for now but means we can break the 'ldisc - is part of the tty struct' assumption later */ - retval = tty_ldisc_get(ldisc, &new_ldisc); - if (retval) - return retval; + new_ldisc = tty_ldisc_get(ldisc); + if (IS_ERR(new_ldisc)) + return PTR_ERR(new_ldisc); /* - * Problem: What do we do if this blocks ? + * We need to look at the tty locking here for pty/tty pairs + * when both sides try to change in parallel. */ - tty_wait_until_sent(tty, 0); + o_tty = tty->link; /* o_tty is the pty side or NULL */ + - if (tty->ldisc.ops->num == ldisc) { - tty_ldisc_put(new_ldisc.ops); + /* + * Check the no-op case + */ + + if (tty->ldisc->ops->num == ldisc) { + tty_ldisc_put(new_ldisc); return 0; } + /* + * Problem: What do we do if this blocks ? + * We could deadlock here + */ + + tty_wait_until_sent(tty, 0); + + mutex_lock(&tty->ldisc_mutex); + + /* + * We could be midstream of another ldisc change which has + * dropped the lock during processing. If so we need to wait. + */ + + while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { + mutex_unlock(&tty->ldisc_mutex); + wait_event(tty_ldisc_wait, + test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); + mutex_lock(&tty->ldisc_mutex); + } + set_bit(TTY_LDISC_CHANGING, &tty->flags); + /* * No more input please, we are switching. The new ldisc * will update this value in the ldisc open function @@ -533,8 +599,6 @@ restart: tty->receive_room = 0; o_ldisc = tty->ldisc; - o_tty = tty->link; - /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -545,108 +609,181 @@ restart: * with a userspace app continually trying to use the tty in * parallel to the change and re-referencing the tty. */ - clear_bit(TTY_LDISC, &tty->flags); - if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); - spin_lock_irqsave(&tty_ldisc_lock, flags); - if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { - if (tty->ldisc.refcount) { - /* Free the new ldisc we grabbed. Must drop the lock - first. */ - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_ldisc.ops); - /* - * There are several reasons we may be busy, including - * random momentary I/O traffic. We must therefore - * retry. We could distinguish between blocking ops - * and retries if we made tty_ldisc_wait() smarter. - * That is up for discussion. - */ - if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - if (o_tty && o_tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_tty->ldisc.ops); - if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - } - /* - * If the TTY_LDISC bit is set, then we are racing against - * another ldisc change - */ - if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { - struct tty_ldisc *ld; - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(new_ldisc.ops); - ld = tty_ldisc_ref_wait(tty); - tty_ldisc_deref(ld); - goto restart; - } - /* - * This flag is used to avoid two parallel ldisc changes. Once - * open and close are fine grained locked this may work better - * as a mutex shared with the open/close/hup paths - */ - set_bit(TTY_LDISC_CHANGING, &tty->flags); + work = tty_ldisc_halt(tty); if (o_tty) - set_bit(TTY_LDISC_CHANGING, &o_tty->flags); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - - /* - * From this point on we know nobody has an ldisc - * usage reference, nor can they obtain one until - * we say so later on. - */ + o_work = tty_ldisc_halt(o_tty); - work = cancel_delayed_work(&tty->buf.work); /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - * MUST NOT hold locks here. + * Wait for ->hangup_work and ->buf.work handlers to terminate. + * We must drop the mutex here in case a hangup is also in process. */ + + mutex_unlock(&tty->ldisc_mutex); + flush_scheduled_work(); + + /* Let any existing reference holders finish */ + retval = tty_ldisc_wait_idle(tty); + if (retval < 0) { + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + tty_ldisc_put(new_ldisc); + return retval; + } + + mutex_lock(&tty->ldisc_mutex); + if (test_bit(TTY_HUPPED, &tty->flags)) { + /* We were raced by the hangup method. It will have stomped + the ldisc data and closed the ldisc down */ + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + mutex_unlock(&tty->ldisc_mutex); + tty_ldisc_put(new_ldisc); + return -EIO; + } + /* Shutdown the current discipline. */ - if (o_ldisc.ops->close) - (o_ldisc.ops->close)(tty); + tty_ldisc_close(tty, o_ldisc); /* Now set up the new line discipline. */ - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, ldisc); - if (new_ldisc.ops->open) - retval = (new_ldisc.ops->open)(tty); + + retval = tty_ldisc_open(tty, new_ldisc); if (retval < 0) { - tty_ldisc_put(new_ldisc.ops); - tty_ldisc_restore(tty, &o_ldisc); + /* Back to the old one or N_TTY if we can't */ + tty_ldisc_put(new_ldisc); + tty_ldisc_restore(tty, o_ldisc); } + /* At this point we hold a reference to the new ldisc and a a reference to the old ldisc. If we ended up flipping back to the existing ldisc we have two references to it */ - if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc) + if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc) tty->ops->set_ldisc(tty); - tty_ldisc_put(o_ldisc.ops); + tty_ldisc_put(o_ldisc); /* - * Allow ldisc referencing to occur as soon as the driver - * ldisc callback completes. + * Allow ldisc referencing to occur again */ tty_ldisc_enable(tty); if (o_tty) tty_ldisc_enable(o_tty); - /* Restart it in case no characters kick it off. Safe if + /* Restart the work queue in case no characters kick it off. Safe if already running */ if (work) schedule_delayed_work(&tty->buf.work, 1); + if (o_work) + schedule_delayed_work(&o_tty->buf.work, 1); + mutex_unlock(&tty->ldisc_mutex); return retval; } +/** + * tty_reset_termios - reset terminal state + * @tty: tty to reset + * + * Restore a terminal to the driver default state. + */ + +static void tty_reset_termios(struct tty_struct *tty) +{ + mutex_lock(&tty->termios_mutex); + *tty->termios = tty->driver->init_termios; + tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); + tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); + mutex_unlock(&tty->termios_mutex); +} + + +/** + * tty_ldisc_reinit - reinitialise the tty ldisc + * @tty: tty to reinit + * + * Switch the tty back to N_TTY line discipline and leave the + * ldisc state closed + */ + +static void tty_ldisc_reinit(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; + /* + * Switch the line discipline back + */ + ld = tty_ldisc_get(N_TTY); + BUG_ON(IS_ERR(ld)); + tty_ldisc_assign(tty, ld); + tty_set_termios_ldisc(tty, N_TTY); +} + +/** + * tty_ldisc_hangup - hangup ldisc reset + * @tty: tty being hung up + * + * Some tty devices reset their termios when they receive a hangup + * event. In that situation we must also switch back to N_TTY properly + * before we reset the termios data. + * + * Locking: We can take the ldisc mutex as the rest of the code is + * careful to allow for this. + * + * In the pty pair case this occurs in the close() path of the + * tty itself so we must be careful about locking rules. + */ + +void tty_ldisc_hangup(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + /* + * FIXME! What are the locking issues here? This may me overdoing + * things... This question is especially important now that we've + * removed the irqlock. + */ + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + /* We may have no line discipline at this point */ + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_driver_flush_buffer(tty); + if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && + ld->ops->write_wakeup) + ld->ops->write_wakeup(tty); + if (ld->ops->hangup) + ld->ops->hangup(tty); + tty_ldisc_deref(ld); + } + /* + * FIXME: Once we trust the LDISC code better we can wait here for + * ldisc completion and fix the driver call race + */ + wake_up_interruptible_poll(&tty->write_wait, POLLOUT); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); + /* + * Shutdown the current line discipline, and reset it to + * N_TTY. + */ + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { + /* Avoid racing set_ldisc */ + mutex_lock(&tty->ldisc_mutex); + /* Switch back to N_TTY */ + tty_ldisc_reinit(tty); + /* At this point we have a closed ldisc and we want to + reopen it. We could defer this to the next open but + it means auditing a lot of other paths so this is a FIXME */ + WARN_ON(tty_ldisc_open(tty, tty->ldisc)); + tty_ldisc_enable(tty); + mutex_unlock(&tty->ldisc_mutex); + tty_reset_termios(tty); + } +} /** * tty_ldisc_setup - open line discipline @@ -654,24 +791,23 @@ restart: * @o_tty: pair tty for pty/tty pairs * * Called during the initial open of a tty/pty pair in order to set up the - * line discplines and bind them to the tty. + * line disciplines and bind them to the tty. This has no locking issues + * as the device isn't yet active. */ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) { - struct tty_ldisc *ld = &tty->ldisc; + struct tty_ldisc *ld = tty->ldisc; int retval; - if (ld->ops->open) { - retval = (ld->ops->open)(tty); - if (retval) - return retval; - } - if (o_tty && o_tty->ldisc.ops->open) { - retval = (o_tty->ldisc.ops->open)(o_tty); + retval = tty_ldisc_open(tty, ld); + if (retval) + return retval; + + if (o_tty) { + retval = tty_ldisc_open(o_tty, o_tty->ldisc); if (retval) { - if (ld->ops->close) - (ld->ops->close)(tty); + tty_ldisc_close(tty, ld); return retval; } tty_ldisc_enable(o_tty); @@ -679,34 +815,18 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } - -static void tty_ldisc_reinit(struct tty_struct *tty) -{ - struct tty_ldisc ld; - - if (tty->ldisc.ops->close) - (tty->ldisc.ops->close)(tty); - tty_ldisc_put(tty->ldisc.ops); - /* - * Switch the line discipline back - */ - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(tty, &ld); - tty_set_termios_ldisc(tty, N_TTY); -} - /** * tty_ldisc_release - release line discipline * @tty: tty being shut down * @o_tty: pair tty for pty/tty pairs * * Called during the final close of a tty/pty pair in order to shut down the - * line discpline layer. + * line discpline layer. On exit the ldisc assigned is N_TTY and the + * ldisc has not been opened. */ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) { - /* * Prevent flush_to_ldisc() from rescheduling the work for later. Then * kill any delayed work. As this is the final close it does not @@ -714,6 +834,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) */ tty_ldisc_halt(tty); + flush_scheduled_work(); /* * Wait for any short term users (we know they are just driver @@ -730,11 +851,9 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) */ tty_ldisc_reinit(tty); - if (o_tty) { - /* FIXME: could o_tty be in setldisc here ? */ - clear_bit(TTY_LDISC, &o_tty->flags); - tty_ldisc_reinit(o_tty); - } + /* This will need doing differently if we need to lock */ + if (o_tty) + tty_ldisc_release(o_tty, NULL); } /** @@ -747,10 +866,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_init(struct tty_struct *tty) { - struct tty_ldisc ld; - if (tty_ldisc_get(N_TTY, &ld) < 0) + struct tty_ldisc *ld = tty_ldisc_get(N_TTY); + if (IS_ERR(ld)) panic("n_tty: init_tty"); - tty_ldisc_assign(tty, &ld); + tty_ldisc_assign(tty, ld); } void tty_ldisc_begin(void) -- cgit v1.2.3-18-g5258 From f2c4c65c8350d885d74dcdea7061dcecc1223c36 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:50:58 +0100 Subject: tty: Move ldisc_flush We have a tty_ldisc file now so put tty_ldisc_flush in the right place Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 21 --------------------- drivers/char/tty_ldisc.c | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 2f44b0b241c..939e198d767 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -470,27 +470,6 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); -/** - * tty_ldisc_flush - flush line discipline queue - * @tty: tty - * - * Flush the line discipline queue (if any) for this tty. If there - * is no line discipline active this is a no-op. - */ - -void tty_ldisc_flush(struct tty_struct *tty) -{ - struct tty_ldisc *ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); - } - tty_buffer_flush(tty); -} - -EXPORT_SYMBOL_GPL(tty_ldisc_flush); - /** * do_tty_hangup - actual handler for hangup events * @work: tty device diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index a58a19a6a5e..01c70c01f64 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -395,6 +395,27 @@ void tty_ldisc_enable(struct tty_struct *tty) wake_up(&tty_ldisc_wait); } +/** + * tty_ldisc_flush - flush line discipline queue + * @tty: tty + * + * Flush the line discipline queue (if any) for this tty. If there + * is no line discipline active this is a no-op. + */ + +void tty_ldisc_flush(struct tty_struct *tty) +{ + struct tty_ldisc *ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + tty_buffer_flush(tty); +} + +EXPORT_SYMBOL_GPL(tty_ldisc_flush); + /** * tty_set_termios_ldisc - set ldisc field * @tty: tty structure -- cgit v1.2.3-18-g5258 From 852e99d22f2231d232c45216b027565e3bae7add Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:51:41 +0100 Subject: tty: bring ldisc into CodingStyle Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 01c70c01f64..39c8f86dedd 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -126,7 +126,7 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc) struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; int err = -EINVAL; - + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL); if (ld == NULL) return ERR_PTR(-ENOMEM); @@ -208,12 +208,12 @@ static void tty_ldisc_put(struct tty_ldisc *ld) kfree(ld); } -static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) +static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) { return (*pos < NR_LDISCS) ? pos : NULL; } -static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) +static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) { (*pos)++; return (*pos < NR_LDISCS) ? pos : NULL; @@ -227,7 +227,7 @@ static int tty_ldiscs_seq_show(struct seq_file *m, void *v) { int i = *(loff_t *)v; struct tty_ldisc *ld; - + ld = tty_ldisc_try_get(i); if (IS_ERR(ld)) return 0; @@ -325,7 +325,6 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) WARN_ON(tty->ldisc->refcount == 0); return tty->ldisc; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); /** @@ -345,7 +344,6 @@ struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) return tty->ldisc; return NULL; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref); /** @@ -373,7 +371,6 @@ void tty_ldisc_deref(struct tty_ldisc *ld) wake_up(&tty_ldisc_wait); spin_unlock_irqrestore(&tty_ldisc_lock, flags); } - EXPORT_SYMBOL_GPL(tty_ldisc_deref); /** @@ -413,7 +410,6 @@ void tty_ldisc_flush(struct tty_struct *tty) } tty_buffer_flush(tty); } - EXPORT_SYMBOL_GPL(tty_ldisc_flush); /** @@ -492,7 +488,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) if (tty_ldisc_open(tty, old) < 0) { tty_ldisc_put(old); /* This driver is always present */ - new_ldisc =tty_ldisc_get(N_TTY); + new_ldisc = tty_ldisc_get(N_TTY); if (IS_ERR(new_ldisc)) panic("n_tty: get"); tty_ldisc_assign(tty, new_ldisc); @@ -514,7 +510,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) * be obtained while the delayed work queue halt ensures that no more * data is fed to the ldisc. * - * In order to wait for any existing references to complete see + * In order to wait for any existing references to complete see * tty_ldisc_wait_idle. */ @@ -611,7 +607,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) mutex_lock(&tty->ldisc_mutex); } set_bit(TTY_LDISC_CHANGING, &tty->flags); - + /* * No more input please, we are switching. The new ldisc * will update this value in the ldisc open function @@ -841,8 +837,8 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) * @tty: tty being shut down * @o_tty: pair tty for pty/tty pairs * - * Called during the final close of a tty/pty pair in order to shut down the - * line discpline layer. On exit the ldisc assigned is N_TTY and the + * Called during the final close of a tty/pty pair in order to shut down + * the line discpline layer. On exit the ldisc assigned is N_TTY and the * ldisc has not been opened. */ -- cgit v1.2.3-18-g5258 From 5fcf62b0f1f24ee25931636216f28bc87448a60f Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:52:26 +0100 Subject: tty: iuu_phoenix: fix locking. Bring in the relevant bits of the 0.9 vendor driver. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index bb572cee6ec..637d0ddbfb4 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -650,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port) unsigned long flags; int result; int i; + int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; dbg("%s - enter", __func__); + spin_lock_irqsave(&priv->lock, flags); *buf_ptr++ = IUU_UART_ESC; *buf_ptr++ = IUU_UART_TX; *buf_ptr++ = priv->writelen; - memcpy(buf_ptr, priv->writebuf, - priv->writelen); + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); if (debug == 1) { - for (i = 0; i < priv->writelen; i++) + for (i = 0; i < buf_len; i++) sprintf(priv->dbgbuf + i*2 , "%02X", priv->writebuf[i]); - priv->dbgbuf[priv->writelen+i*2] = 0; + priv->dbgbuf[buf_len+i*2] = 0; dbg("%s - writing %i chars : %s", __func__, - priv->writelen, priv->dbgbuf); + buf_len, priv->dbgbuf); } usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, priv->writelen + 3, + port->write_urb->transfer_buffer, buf_len + 3, iuu_rxcmd, port); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - spin_lock_irqsave(&priv->lock, flags); - priv->writelen = 0; - spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); return result; } @@ -769,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, return -ENOMEM; spin_lock_irqsave(&priv->lock, flags); - if (priv->writelen > 0) { - /* buffer already filled but not commited */ - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } + /* fill the buffer */ - memcpy(priv->writebuf, buf, count); - priv->writelen = count; + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; spin_unlock_irqrestore(&priv->lock, flags); return count; -- cgit v1.2.3-18-g5258 From cc3447d179d8a5e16807e52b77d7f4c095ffedb7 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:53:24 +0100 Subject: tty: iuu_phoenix: Fix stopbit when uart goes on. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 637d0ddbfb4..ef6d12fd579 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -815,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port) buf[0] = IUU_UART_ENABLE; buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); buf[2] = (u8) (0x00FF & IUU_BAUD_9600); - buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { -- cgit v1.2.3-18-g5258 From 96dab77ebf3868cc8723ac95e048e8a9c1dccf22 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:54:20 +0100 Subject: tty: iuu_phoenix: set termios. set_termios can now be used for setting the parity and the stopbits. This is needed to use with cards which use a different parity then the parity used at start (even). If the iuu_uart_baud function return an error, we will return the old_termios instead of the new one. Signed-off-by: Olivier Bornet This was then revamped to use the various helpers, not copy non-hardware bits any to add mark/space parity and csize reporting Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 50 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index ef6d12fd579..fa86f6e7415 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -942,6 +942,55 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + const u32 supported_mask = CMSPAR|PARENB|PARODD; + + unsigned int cflag = tty->termios->c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud = 9600; /* Fixed for the moment */ + u32 newval = cflag & supported_mask; + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + (clockmode == 2) ? 16457 : 9600 * boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios->c_cflag &= ~(supported_mask|CSIZE); + tty->termios->c_cflag |= newval | csize; +} + static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ @@ -1151,6 +1200,7 @@ static struct usb_serial_driver iuu_device = { .read_bulk_callback = iuu_uart_read_callback, .tiocmget = iuu_tiocmget, .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, .attach = iuu_startup, .shutdown = iuu_shutdown, }; -- cgit v1.2.3-18-g5258 From 9bb41699ad5c74519dc054bfe469a8074799c863 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:55:01 +0100 Subject: tty: iuu_phoenix: update version number. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index fa86f6e7415..76a3cc327bb 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.10" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { -- cgit v1.2.3-18-g5258 From 13858d36903990441a89eb342247b71436808eeb Mon Sep 17 00:00:00 2001 From: "Alexander Y. Fomichev" Date: Thu, 11 Jun 2009 12:56:00 +0100 Subject: jsm: correctly support multiple 4/8-port boards If there are more then one 4/8-port board jsm_uart_port_init allocate a line numbers of the second and further boards from range of previous one. This patch fixed the problem. Signed-off-by: Alexander Y. Fomichev [printks fixed to add jsm: ] Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm.h | 1 + drivers/serial/jsm/jsm_tty.c | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index c0a3e2734e2..4e5f3bde046 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -61,6 +61,7 @@ enum { if ((DBG_##nlevel & jsm_debug)) \ dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) +#define MAXLINES 256 #define MAXPORTS 8 #define MAX_STOPS_SENT 5 diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 31496dc0a0d..107ce2e187b 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -33,6 +33,8 @@ #include "jsm.h" +static DECLARE_BITMAP(linemap, MAXLINES); + static void jsm_carrier(struct jsm_channel *ch); static inline int jsm_get_mstat(struct jsm_channel *ch) @@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) int __devinit jsm_uart_port_init(struct jsm_board *brd) { int i; + unsigned int line; struct jsm_channel *ch; if (!brd) @@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd) brd->channels[i]->uart_port.membase = brd->re_map_membase; brd->channels[i]->uart_port.fifosize = 16; brd->channels[i]->uart_port.ops = &jsm_ops; - brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2; + line = find_first_zero_bit(linemap, MAXLINES); + if (line >= MAXLINES) { + printk(KERN_INFO "jsm: linemap is full, added device failed\n"); + continue; + } else + set_bit((int)line, linemap); + brd->channels[i]->uart_port.line = line; if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) - printk(KERN_INFO "Added device failed\n"); + printk(KERN_INFO "jsm: add device failed\n"); else printk(KERN_INFO "Added device \n"); } @@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd) ch = brd->channels[i]; + clear_bit((int)(ch->uart_port.line), linemap); uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); } -- cgit v1.2.3-18-g5258 From aba6593bf77371e71331ba76dacc98b47760cba3 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 11 Jun 2009 13:02:59 +0100 Subject: icom: fixing a if clause spaghetti adapter->version can only be ADAPTER_V2 or ADAPTER_V1. So, that OR operand in the "if" clause is non-sense and can be removed. Signed-off-by: Breno Leitao Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index a461b3b2c72..fd5fd23804b 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -408,7 +408,7 @@ static void load_code(struct icom_port *icom_port) release_firmware(fw); /* Set Hardware level */ - if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2) + if (icom_port->adapter->version == ADAPTER_V2) writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); /* Start the processor in Adapter */ @@ -861,7 +861,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id) /* find icom_port for this interrupt */ icom_adapter = (struct icom_adapter *) dev_id; - if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) { + if (icom_adapter->version == ADAPTER_V2) { int_reg = icom_adapter->base_addr + 0x8024; adapter_interrupts = readl(int_reg); -- cgit v1.2.3-18-g5258 From c481c707fe4b07783d9a2499a9bbbb94497e9b18 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:04:27 +0100 Subject: tty: remove buffer special casing Long long ago a 4K kmalloc allocated two pages so the tty layer used the page allocator, except on some machines where the page size was huge. This was removed from the core tty layer with the tty buffer re-implementation but not from tty_audit or the n_tty ldisc. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/n_tty.c | 11 ++--------- drivers/char/tty_audit.c | 10 ++-------- 2 files changed, 4 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index f6f0e4ec2b5..b4b12b4f0ac 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -76,19 +76,12 @@ static inline unsigned char *alloc_buf(void) { gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; - - if (PAGE_SIZE != N_TTY_BUF_SIZE) - return kmalloc(N_TTY_BUF_SIZE, prio); - else - return (unsigned char *)__get_free_page(prio); + return kmalloc(N_TTY_BUF_SIZE, prio); } static inline void free_buf(unsigned char *buf) { - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf); - else - free_page((unsigned long) buf); + kfree(buf); } static inline int tty_put_user(struct tty_struct *tty, unsigned char x, diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c index 55ba6f14288..ac16fbec72d 100644 --- a/drivers/char/tty_audit.c +++ b/drivers/char/tty_audit.c @@ -29,10 +29,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor, buf = kmalloc(sizeof(*buf), GFP_KERNEL); if (!buf) goto err; - if (PAGE_SIZE != N_TTY_BUF_SIZE) - buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - else - buf->data = (unsigned char *)__get_free_page(GFP_KERNEL); + buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!buf->data) goto err_buf; atomic_set(&buf->count, 1); @@ -52,10 +49,7 @@ err: static void tty_audit_buf_free(struct tty_audit_buf *buf) { WARN_ON(buf->valid != 0); - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf->data); - else - free_page((unsigned long)buf->data); + kfree(buf->data); kfree(buf); } -- cgit v1.2.3-18-g5258 From 0b4068a1287b02018d1b3159e7be6f27f3e3e68c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:05:49 +0100 Subject: tty: simplify buffer allocator cleanups Having cleaned up the allocators we might as well remove the inline helpers for some of it Signed-off-by: Alan Cox --- drivers/char/n_tty.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index b4b12b4f0ac..94a5d5020ab 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -73,17 +73,6 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 -static inline unsigned char *alloc_buf(void) -{ - gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; - return kmalloc(N_TTY_BUF_SIZE, prio); -} - -static inline void free_buf(unsigned char *buf) -{ - kfree(buf); -} - static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -1551,11 +1540,11 @@ static void n_tty_close(struct tty_struct *tty) { n_tty_flush_buffer(tty); if (tty->read_buf) { - free_buf(tty->read_buf); + kfree(tty->read_buf); tty->read_buf = NULL; } if (tty->echo_buf) { - free_buf(tty->echo_buf); + kfree(tty->echo_buf); tty->echo_buf = NULL; } } @@ -1577,17 +1566,16 @@ static int n_tty_open(struct tty_struct *tty) /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { - tty->read_buf = alloc_buf(); + tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!tty->read_buf) return -ENOMEM; } if (!tty->echo_buf) { - tty->echo_buf = alloc_buf(); + tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + if (!tty->echo_buf) return -ENOMEM; } - memset(tty->read_buf, 0, N_TTY_BUF_SIZE); - memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); -- cgit v1.2.3-18-g5258 From 73e0d48b8c28fb39a0bb6713c875e9919a9af546 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 11 Jun 2009 13:06:31 +0100 Subject: parport_pc: Fix subscription bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes array subscription bugs in the parport_pc driver. drivers/parport/parport_pc.c: In function ‘parport_irq_probe’: drivers/parport/parport_pc.c:1589: warning: array subscript is above array bounds drivers/parport/parport_pc.c: In function ‘parport_pc_probe_port’: drivers/parport/parport_pc.c:1579: warning: array subscript is above array bounds The patch also fixes a few other array bugs, which the compiler was unable to find. Coding style violations are also fixed. Signed-off-by: Michael Buesch Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 4e63cc9e277..24984c4a1ba 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1246,17 +1246,17 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], (cr4 & 0x40) ? "1.7" : "1.9"); } - + /* Heuristics ! BIOS setup for this mainboard device limits the choices to standard settings, i.e. io-address and IRQ are related, however DMA can be 1 or 3, assume DMA_A=DMA1, DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */ - if(cr23*4 >=0x100) { /* if active */ - while((superios[i].io!= 0) && (i= 0x100) { /* if active */ + while ((i < NR_SUPERIOS) && (superios[i].io != 0)) i++; - if(i==NR_SUPERIOS) + if (i == NR_SUPERIOS) { printk(KERN_INFO "Super-IO: too many chips!\n"); - else { + } else { int d; switch (cr23*4) { case 0x3bc: @@ -1332,12 +1332,12 @@ static void __devinit show_parconfig_winbond(int io, int key) printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]); } - if(cr30 & 0x01) { /* the settings can be interrogated later ... */ - while((superios[i].io!= 0) && (i 3) ? @@ -1575,24 +1575,26 @@ static void __devinit detect_and_report_it87(void) static int get_superio_dma (struct parport *p) { - int i=0; - while( (superios[i].io != p->base) && (ibase)) i++; - if (i!=NR_SUPERIOS) + if (i != NR_SUPERIOS) return superios[i].dma; return PARPORT_DMA_NONE; } static int get_superio_irq (struct parport *p) { - int i=0; - while( (superios[i].io != p->base) && (ibase)) i++; - if (i!=NR_SUPERIOS) + if (i != NR_SUPERIOS) return superios[i].irq; return PARPORT_IRQ_NONE; } - + /* --- Mode detection ------------------------------------- */ -- cgit v1.2.3-18-g5258 From 3aeda9bc95d064308a70664e6f4a158c96cc1918 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:07:29 +0100 Subject: parport_pc: Coding style Michael's patch fixed some of the coding style so the style is now inconsistent. Sort the rest out Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 1746 ++++++++++++++++++++++-------------------- 1 file changed, 916 insertions(+), 830 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 24984c4a1ba..edf83e94585 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1,5 +1,5 @@ /* Low-level parallel-port routines for 8255-based PC-style hardware. - * + * * Authors: Phil Blundell * Tim Waugh * Jose Renau @@ -11,7 +11,7 @@ * Cleaned up include files - Russell King * DMA support - Bert De Jonghe * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999 - * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. + * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. * Various hacks, Fred Barnes, 04/2001 * Updated probing logic - Adam Belay */ @@ -56,10 +56,10 @@ #include #include #include +#include +#include -#include #include -#include #include #include @@ -82,7 +82,7 @@ #define ECR_TST 06 #define ECR_CNF 07 #define ECR_MODE_MASK 0xe0 -#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v)) +#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v)) #undef DEBUG @@ -109,27 +109,27 @@ static int pci_registered_parport; static int pnp_registered_parport; /* frob_control, but for ECR */ -static void frob_econtrol (struct parport *pb, unsigned char m, +static void frob_econtrol(struct parport *pb, unsigned char m, unsigned char v) { unsigned char ectr = 0; if (m != 0xff) - ectr = inb (ECONTROL (pb)); + ectr = inb(ECONTROL(pb)); - DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", + DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", m, v, ectr, (ectr & ~m) ^ v); - outb ((ectr & ~m) ^ v, ECONTROL (pb)); + outb((ectr & ~m) ^ v, ECONTROL(pb)); } -static __inline__ void frob_set_mode (struct parport *p, int mode) +static inline void frob_set_mode(struct parport *p, int mode) { - frob_econtrol (p, ECR_MODE_MASK, mode << 5); + frob_econtrol(p, ECR_MODE_MASK, mode << 5); } #ifdef CONFIG_PARPORT_PC_FIFO -/* Safely change the mode bits in the ECR +/* Safely change the mode bits in the ECR Returns: 0 : Success -EBUSY: Could not drain FIFO in some finite amount of time, @@ -141,17 +141,18 @@ static int change_mode(struct parport *p, int m) unsigned char oecr; int mode; - DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m); + DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m); if (!priv->ecr) { - printk (KERN_DEBUG "change_mode: but there's no ECR!\n"); + printk(KERN_DEBUG "change_mode: but there's no ECR!\n"); return 0; } /* Bits <7:5> contain the mode. */ - oecr = inb (ECONTROL (p)); + oecr = inb(ECONTROL(p)); mode = (oecr >> 5) & 0x7; - if (mode == m) return 0; + if (mode == m) + return 0; if (mode >= 2 && !(priv->ctr & 0x20)) { /* This mode resets the FIFO, so we may @@ -163,19 +164,21 @@ static int change_mode(struct parport *p, int m) case ECR_ECP: /* ECP Parallel Port mode */ /* Busy wait for 200us */ for (counter = 0; counter < 40; counter++) { - if (inb (ECONTROL (p)) & 0x01) + if (inb(ECONTROL(p)) & 0x01) break; - if (signal_pending (current)) break; - udelay (5); + if (signal_pending(current)) + break; + udelay(5); } /* Poll slowly. */ - while (!(inb (ECONTROL (p)) & 0x01)) { - if (time_after_eq (jiffies, expire)) + while (!(inb(ECONTROL(p)) & 0x01)) { + if (time_after_eq(jiffies, expire)) /* The FIFO is stuck. */ return -EBUSY; - schedule_timeout_interruptible(msecs_to_jiffies(10)); - if (signal_pending (current)) + schedule_timeout_interruptible( + msecs_to_jiffies(10)); + if (signal_pending(current)) break; } } @@ -185,20 +188,20 @@ static int change_mode(struct parport *p, int m) /* We have to go through mode 001 */ oecr &= ~(7 << 5); oecr |= ECR_PS2 << 5; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); } /* Set the mode. */ oecr &= ~(7 << 5); oecr |= m << 5; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); return 0; } #ifdef CONFIG_PARPORT_1284 /* Find FIFO lossage; FIFO is reset */ #if 0 -static int get_fifo_residue (struct parport *p) +static int get_fifo_residue(struct parport *p) { int residue; int cnfga; @@ -206,26 +209,26 @@ static int get_fifo_residue (struct parport *p) /* Adjust for the contents of the FIFO. */ for (residue = priv->fifo_depth; ; residue--) { - if (inb (ECONTROL (p)) & 0x2) + if (inb(ECONTROL(p)) & 0x2) /* Full up. */ break; - outb (0, FIFO (p)); + outb(0, FIFO(p)); } - printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name, + printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name, residue); /* Reset the FIFO. */ - frob_set_mode (p, ECR_PS2); + frob_set_mode(p, ECR_PS2); /* Now change to config mode and clean up. FIXME */ - frob_set_mode (p, ECR_CNF); - cnfga = inb (CONFIGA (p)); - printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga); + frob_set_mode(p, ECR_CNF); + cnfga = inb(CONFIGA(p)); + printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga); if (!(cnfga & (1<<2))) { - printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name); + printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name); residue++; } @@ -233,9 +236,11 @@ static int get_fifo_residue (struct parport *p) * PWord != 1 byte. */ /* Back to PS2 mode. */ - frob_set_mode (p, ECR_PS2); + frob_set_mode(p, ECR_PS2); - DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p))); + DPRINTK(KERN_DEBUG + "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", + inb(ECONTROL(p))); return residue; } #endif /* 0 */ @@ -257,8 +262,8 @@ static int clear_epp_timeout(struct parport *pb) /* To clear timeout some chips require double read */ parport_pc_read_status(pb); r = parport_pc_read_status(pb); - outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */ - outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */ + outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */ + outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */ r = parport_pc_read_status(pb); return !(r & 0x01); @@ -272,7 +277,8 @@ static int clear_epp_timeout(struct parport *pb) * of these are in parport_pc.h. */ -static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s) +static void parport_pc_init_state(struct pardevice *dev, + struct parport_state *s) { s->u.pc.ctr = 0xc; if (dev->irq_func && @@ -289,22 +295,23 @@ static void parport_pc_save_state(struct parport *p, struct parport_state *s) const struct parport_pc_private *priv = p->physport->private_data; s->u.pc.ctr = priv->ctr; if (priv->ecr) - s->u.pc.ecr = inb (ECONTROL (p)); + s->u.pc.ecr = inb(ECONTROL(p)); } -static void parport_pc_restore_state(struct parport *p, struct parport_state *s) +static void parport_pc_restore_state(struct parport *p, + struct parport_state *s) { struct parport_pc_private *priv = p->physport->private_data; register unsigned char c = s->u.pc.ctr & priv->ctr_writable; - outb (c, CONTROL (p)); + outb(c, CONTROL(p)); priv->ctr = c; if (priv->ecr) - ECR_WRITE (p, s->u.pc.ecr); + ECR_WRITE(p, s->u.pc.ecr); } #ifdef CONFIG_PARPORT_1284 -static size_t parport_pc_epp_read_data (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_epp_read_data(struct parport *port, void *buf, + size_t length, int flags) { size_t got = 0; @@ -316,54 +323,52 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf, * nFault is 0 if there is at least 1 byte in the Warp's FIFO * pError is 1 if there are 16 bytes in the Warp's FIFO */ - status = inb (STATUS (port)); + status = inb(STATUS(port)); - while (!(status & 0x08) && (got < length)) { - if ((left >= 16) && (status & 0x20) && !(status & 0x08)) { + while (!(status & 0x08) && got < length) { + if (left >= 16 && (status & 0x20) && !(status & 0x08)) { /* can grab 16 bytes from warp fifo */ - if (!((long)buf & 0x03)) { - insl (EPPDATA (port), buf, 4); - } else { - insb (EPPDATA (port), buf, 16); - } + if (!((long)buf & 0x03)) + insl(EPPDATA(port), buf, 4); + else + insb(EPPDATA(port), buf, 16); buf += 16; got += 16; left -= 16; } else { /* grab single byte from the warp fifo */ - *((char *)buf) = inb (EPPDATA (port)); + *((char *)buf) = inb(EPPDATA(port)); buf++; got++; left--; } - status = inb (STATUS (port)); + status = inb(STATUS(port)); if (status & 0x01) { /* EPP timeout should never occur... */ - printk (KERN_DEBUG "%s: EPP timeout occurred while talking to " - "w91284pic (should not have done)\n", port->name); - clear_epp_timeout (port); + printk(KERN_DEBUG +"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name); + clear_epp_timeout(port); } } return got; } if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - if (!(((long)buf | length) & 0x03)) { - insl (EPPDATA (port), buf, (length >> 2)); - } else { - insb (EPPDATA (port), buf, length); - } - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (!(((long)buf | length) & 0x03)) + insl(EPPDATA(port), buf, (length >> 2)); + else + insb(EPPDATA(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; got < length; got++) { - *((char*)buf) = inb (EPPDATA(port)); + *((char *)buf) = inb(EPPDATA(port)); buf++; - if (inb (STATUS (port)) & 0x01) { + if (inb(STATUS(port)) & 0x01) { /* EPP timeout */ - clear_epp_timeout (port); + clear_epp_timeout(port); break; } } @@ -371,28 +376,27 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf, return got; } -static size_t parport_pc_epp_write_data (struct parport *port, const void *buf, - size_t length, int flags) +static size_t parport_pc_epp_write_data(struct parport *port, const void *buf, + size_t length, int flags) { size_t written = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - if (!(((long)buf | length) & 0x03)) { - outsl (EPPDATA (port), buf, (length >> 2)); - } else { - outsb (EPPDATA (port), buf, length); - } - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (!(((long)buf | length) & 0x03)) + outsl(EPPDATA(port), buf, (length >> 2)); + else + outsb(EPPDATA(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; written < length; written++) { - outb (*((char*)buf), EPPDATA(port)); + outb(*((char *)buf), EPPDATA(port)); buf++; - if (inb (STATUS(port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -400,24 +404,24 @@ static size_t parport_pc_epp_write_data (struct parport *port, const void *buf, return written; } -static size_t parport_pc_epp_read_addr (struct parport *port, void *buf, +static size_t parport_pc_epp_read_addr(struct parport *port, void *buf, size_t length, int flags) { size_t got = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - insb (EPPADDR (port), buf, length); - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + insb(EPPADDR(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; got < length; got++) { - *((char*)buf) = inb (EPPADDR (port)); + *((char *)buf) = inb(EPPADDR(port)); buf++; - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -425,25 +429,25 @@ static size_t parport_pc_epp_read_addr (struct parport *port, void *buf, return got; } -static size_t parport_pc_epp_write_addr (struct parport *port, +static size_t parport_pc_epp_write_addr(struct parport *port, const void *buf, size_t length, int flags) { size_t written = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - outsb (EPPADDR (port), buf, length); - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + outsb(EPPADDR(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; written < length; written++) { - outb (*((char*)buf), EPPADDR (port)); + outb(*((char *)buf), EPPADDR(port)); buf++; - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -451,74 +455,74 @@ static size_t parport_pc_epp_write_addr (struct parport *port, return written; } -static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf, + size_t length, int flags) { size_t got; - frob_set_mode (port, ECR_EPP); - parport_pc_data_reverse (port); - parport_pc_write_control (port, 0x4); - got = parport_pc_epp_read_data (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_data_reverse(port); + parport_pc_write_control(port, 0x4); + got = parport_pc_epp_read_data(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return got; } -static size_t parport_pc_ecpepp_write_data (struct parport *port, - const void *buf, size_t length, - int flags) +static size_t parport_pc_ecpepp_write_data(struct parport *port, + const void *buf, size_t length, + int flags) { size_t written; - frob_set_mode (port, ECR_EPP); - parport_pc_write_control (port, 0x4); - parport_pc_data_forward (port); - written = parport_pc_epp_write_data (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_write_control(port, 0x4); + parport_pc_data_forward(port); + written = parport_pc_epp_write_data(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return written; } -static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf, + size_t length, int flags) { size_t got; - frob_set_mode (port, ECR_EPP); - parport_pc_data_reverse (port); - parport_pc_write_control (port, 0x4); - got = parport_pc_epp_read_addr (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_data_reverse(port); + parport_pc_write_control(port, 0x4); + got = parport_pc_epp_read_addr(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return got; } -static size_t parport_pc_ecpepp_write_addr (struct parport *port, +static size_t parport_pc_ecpepp_write_addr(struct parport *port, const void *buf, size_t length, int flags) { size_t written; - frob_set_mode (port, ECR_EPP); - parport_pc_write_control (port, 0x4); - parport_pc_data_forward (port); - written = parport_pc_epp_write_addr (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_write_control(port, 0x4); + parport_pc_data_forward(port); + written = parport_pc_epp_write_addr(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return written; } #endif /* IEEE 1284 support */ #ifdef CONFIG_PARPORT_PC_FIFO -static size_t parport_pc_fifo_write_block_pio (struct parport *port, +static size_t parport_pc_fifo_write_block_pio(struct parport *port, const void *buf, size_t length) { int ret = 0; const unsigned char *bufp = buf; size_t left = length; unsigned long expire = jiffies + port->physport->cad->timeout; - const int fifo = FIFO (port); + const int fifo = FIFO(port); int poll_for = 8; /* 80 usecs */ const struct parport_pc_private *priv = port->physport->private_data; const int fifo_depth = priv->fifo_depth; @@ -526,25 +530,25 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, port = port->physport; /* We don't want to be interrupted every character. */ - parport_pc_disable_irq (port); + parport_pc_disable_irq(port); /* set nErrIntrEn and serviceIntr */ - frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2)); /* Forward mode. */ - parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_data_forward(port); /* Must be in PS2 mode */ while (left) { unsigned char byte; - unsigned char ecrval = inb (ECONTROL (port)); + unsigned char ecrval = inb(ECONTROL(port)); int i = 0; - if (need_resched() && time_before (jiffies, expire)) + if (need_resched() && time_before(jiffies, expire)) /* Can't yield the port. */ - schedule (); + schedule(); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } @@ -552,21 +556,22 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, /* FIFO is full. Wait for interrupt. */ /* Clear serviceIntr */ - ECR_WRITE (port, ecrval & ~(1<<2)); - false_alarm: - ret = parport_wait_event (port, HZ); - if (ret < 0) break; + ECR_WRITE(port, ecrval & ~(1<<2)); +false_alarm: + ret = parport_wait_event(port, HZ); + if (ret < 0) + break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ - printk (KERN_DEBUG "FIFO write timed out\n"); + printk(KERN_DEBUG "FIFO write timed out\n"); break; } - ecrval = inb (ECONTROL (port)); + ecrval = inb(ECONTROL(port)); if (!(ecrval & (1<<2))) { if (need_resched() && - time_before (jiffies, expire)) - schedule (); + time_before(jiffies, expire)) + schedule(); goto false_alarm; } @@ -577,38 +582,38 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, /* Can't fail now. */ expire = jiffies + port->cad->timeout; - poll: - if (signal_pending (current)) +poll: + if (signal_pending(current)) break; if (ecrval & 0x01) { /* FIFO is empty. Blast it full. */ const int n = left < fifo_depth ? left : fifo_depth; - outsb (fifo, bufp, n); + outsb(fifo, bufp, n); bufp += n; left -= n; /* Adjust the poll time. */ - if (i < (poll_for - 2)) poll_for--; + if (i < (poll_for - 2)) + poll_for--; continue; } else if (i++ < poll_for) { - udelay (10); - ecrval = inb (ECONTROL (port)); + udelay(10); + ecrval = inb(ECONTROL(port)); goto poll; } - /* Half-full (call me an optimist) */ + /* Half-full(call me an optimist) */ byte = *bufp++; - outb (byte, fifo); + outb(byte, fifo); left--; - } - -dump_parport_state ("leave fifo_write_block_pio", port); + } + dump_parport_state("leave fifo_write_block_pio", port); return length - left; } #ifdef HAS_DMA -static size_t parport_pc_fifo_write_block_dma (struct parport *port, +static size_t parport_pc_fifo_write_block_dma(struct parport *port, const void *buf, size_t length) { int ret = 0; @@ -621,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma (struct parport *port, unsigned long start = (unsigned long) buf; unsigned long end = (unsigned long) buf + length - 1; -dump_parport_state ("enter fifo_write_block_dma", port); +dump_parport_state("enter fifo_write_block_dma", port); if (end < MAX_DMA_ADDRESS) { /* If it would cross a 64k boundary, cap it at the end. */ if ((start ^ end) & ~0xffffUL) @@ -629,8 +634,9 @@ dump_parport_state ("enter fifo_write_block_dma", port); dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length, DMA_TO_DEVICE); - } else { - /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */ + } else { + /* above 16 MB we use a bounce buffer as ISA-DMA + is not possible */ maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */ dma_addr = priv->dma_handle; dma_handle = 0; @@ -639,12 +645,12 @@ dump_parport_state ("enter fifo_write_block_dma", port); port = port->physport; /* We don't want to be interrupted every character. */ - parport_pc_disable_irq (port); + parport_pc_disable_irq(port); /* set nErrIntrEn and serviceIntr */ - frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2)); /* Forward mode. */ - parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_data_forward(port); /* Must be in PS2 mode */ while (left) { unsigned long expire = jiffies + port->physport->cad->timeout; @@ -665,10 +671,10 @@ dump_parport_state ("enter fifo_write_block_dma", port); set_dma_count(port->dma, count); /* Set DMA mode */ - frob_econtrol (port, 1<<3, 1<<3); + frob_econtrol(port, 1<<3, 1<<3); /* Clear serviceIntr */ - frob_econtrol (port, 1<<2, 0); + frob_econtrol(port, 1<<2, 0); enable_dma(port->dma); release_dma_lock(dmaflag); @@ -676,20 +682,22 @@ dump_parport_state ("enter fifo_write_block_dma", port); /* assume DMA will be successful */ left -= count; buf += count; - if (dma_handle) dma_addr += count; + if (dma_handle) + dma_addr += count; /* Wait for interrupt. */ - false_alarm: - ret = parport_wait_event (port, HZ); - if (ret < 0) break; +false_alarm: + ret = parport_wait_event(port, HZ); + if (ret < 0) + break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ - printk (KERN_DEBUG "DMA write timed out\n"); + printk(KERN_DEBUG "DMA write timed out\n"); break; } /* Is serviceIntr set? */ - if (!(inb (ECONTROL (port)) & (1<<2))) { + if (!(inb(ECONTROL(port)) & (1<<2))) { cond_resched(); goto false_alarm; @@ -705,14 +713,15 @@ dump_parport_state ("enter fifo_write_block_dma", port); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } /* update for possible DMA residue ! */ buf -= count; left += count; - if (dma_handle) dma_addr -= count; + if (dma_handle) + dma_addr -= count; } /* Maybe got here through break, so adjust for DMA residue! */ @@ -723,12 +732,12 @@ dump_parport_state ("enter fifo_write_block_dma", port); release_dma_lock(dmaflag); /* Turn off DMA mode */ - frob_econtrol (port, 1<<3, 0); + frob_econtrol(port, 1<<3, 0); if (dma_handle) dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE); -dump_parport_state ("leave fifo_write_block_dma", port); +dump_parport_state("leave fifo_write_block_dma", port); return length - left; } #endif @@ -738,13 +747,13 @@ static inline size_t parport_pc_fifo_write_block(struct parport *port, { #ifdef HAS_DMA if (port->dma != PARPORT_DMA_NONE) - return parport_pc_fifo_write_block_dma (port, buf, length); + return parport_pc_fifo_write_block_dma(port, buf, length); #endif - return parport_pc_fifo_write_block_pio (port, buf, length); + return parport_pc_fifo_write_block_pio(port, buf, length); } /* Parallel Port FIFO mode (ECP chipsets) */ -static size_t parport_pc_compat_write_block_pio (struct parport *port, +static size_t parport_pc_compat_write_block_pio(struct parport *port, const void *buf, size_t length, int flags) { @@ -756,14 +765,16 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_write_compat (port, buf, + return parport_ieee1284_write_compat(port, buf, length, flags); /* Set up parallel port FIFO mode.*/ - parport_pc_data_forward (port); /* Must be in PS2 mode */ - parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0); - r = change_mode (port, ECR_PPF); /* Parallel port FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name); + parport_pc_data_forward(port); /* Must be in PS2 mode */ + parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0); + r = change_mode(port, ECR_PPF); /* Parallel port FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; @@ -775,40 +786,39 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, * the FIFO is empty, so allow 4 seconds for each position * in the fifo. */ - expire = jiffies + (priv->fifo_depth * HZ * 4); + expire = jiffies + (priv->fifo_depth * HZ * 4); do { /* Wait for the FIFO to empty */ - r = change_mode (port, ECR_PS2); - if (r != -EBUSY) { + r = change_mode(port, ECR_PS2); + if (r != -EBUSY) break; - } - } while (time_before (jiffies, expire)); + } while (time_before(jiffies, expire)); if (r == -EBUSY) { - printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); /* Prevent further data transfer. */ - frob_set_mode (port, ECR_TST); + frob_set_mode(port, ECR_TST); /* Adjust for the contents of the FIFO. */ for (written -= priv->fifo_depth; ; written++) { - if (inb (ECONTROL (port)) & 0x2) { + if (inb(ECONTROL(port)) & 0x2) { /* Full up. */ break; } - outb (0, FIFO (port)); + outb(0, FIFO(port)); } /* Reset the FIFO and return to PS2 mode. */ - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_PS2); } - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); if (r) - printk (KERN_DEBUG - "%s: BUSY timeout (%d) in compat_write_block_pio\n", + printk(KERN_DEBUG + "%s: BUSY timeout (%d) in compat_write_block_pio\n", port->name, r); port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; @@ -818,7 +828,7 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, /* ECP */ #ifdef CONFIG_PARPORT_1284 -static size_t parport_pc_ecp_write_block_pio (struct parport *port, +static size_t parport_pc_ecp_write_block_pio(struct parport *port, const void *buf, size_t length, int flags) { @@ -830,36 +840,38 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_ecp_write_data (port, buf, + return parport_ieee1284_ecp_write_data(port, buf, length, flags); /* Switch to forward mode if necessary. */ if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) { /* Event 47: Set nInit high. */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT | PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_INIT | PARPORT_CONTROL_AUTOFD); /* Event 49: PError goes high. */ - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - printk (KERN_DEBUG "%s: PError timeout (%d) " + printk(KERN_DEBUG "%s: PError timeout (%d) " "in ecp_write_block_pio\n", port->name, r); } } /* Set up ECP parallel port mode.*/ - parport_pc_data_forward (port); /* Must be in PS2 mode */ - parport_pc_frob_control (port, + parport_pc_data_forward(port); /* Must be in PS2 mode */ + parport_pc_frob_control(port, PARPORT_CONTROL_STROBE | PARPORT_CONTROL_AUTOFD, 0); - r = change_mode (port, ECR_ECP); /* ECP FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + r = change_mode(port, ECR_ECP); /* ECP FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; /* Write the data to the FIFO. */ @@ -873,55 +885,54 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, expire = jiffies + (priv->fifo_depth * (HZ * 4)); do { /* Wait for the FIFO to empty */ - r = change_mode (port, ECR_PS2); - if (r != -EBUSY) { + r = change_mode(port, ECR_PS2); + if (r != -EBUSY) break; - } - } while (time_before (jiffies, expire)); + } while (time_before(jiffies, expire)); if (r == -EBUSY) { - printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); /* Prevent further data transfer. */ - frob_set_mode (port, ECR_TST); + frob_set_mode(port, ECR_TST); /* Adjust for the contents of the FIFO. */ for (written -= priv->fifo_depth; ; written++) { - if (inb (ECONTROL (port)) & 0x2) { + if (inb(ECONTROL(port)) & 0x2) { /* Full up. */ break; } - outb (0, FIFO (port)); + outb(0, FIFO(port)); } /* Reset the FIFO and return to PS2 mode. */ - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_PS2); /* Host transfer recovery. */ - parport_pc_data_reverse (port); /* Must be in PS2 mode */ - udelay (5); - parport_frob_control (port, PARPORT_CONTROL_INIT, 0); - r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); + parport_pc_data_reverse(port); /* Must be in PS2 mode */ + udelay(5); + parport_frob_control(port, PARPORT_CONTROL_INIT, 0); + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0); if (r) - printk (KERN_DEBUG "%s: PE,1 timeout (%d) " + printk(KERN_DEBUG "%s: PE,1 timeout (%d) " "in ecp_write_block_pio\n", port->name, r); - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); - if (r) - printk (KERN_DEBUG "%s: PE,2 timeout (%d) " + if (r) + printk(KERN_DEBUG "%s: PE,2 timeout (%d) " "in ecp_write_block_pio\n", port->name, r); } - r = parport_wait_peripheral (port, - PARPORT_STATUS_BUSY, + r = parport_wait_peripheral(port, + PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); - if(r) - printk (KERN_DEBUG + if (r) + printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n", port->name, r); @@ -931,7 +942,7 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, } #if 0 -static size_t parport_pc_ecp_read_block_pio (struct parport *port, +static size_t parport_pc_ecp_read_block_pio(struct parport *port, void *buf, size_t length, int flags) { @@ -944,13 +955,13 @@ static size_t parport_pc_ecp_read_block_pio (struct parport *port, char *bufp = buf; port = port->physport; -DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); -dump_parport_state ("enter fcn", port); +DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); +dump_parport_state("enter fcn", port); /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_ecp_read_data (port, buf, + return parport_ieee1284_ecp_read_data(port, buf, length, flags); if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) { @@ -966,173 +977,177 @@ dump_parport_state ("enter fcn", port); * go through software emulation. Otherwise we may have to throw * away data. */ if (length < fifofull) - return parport_ieee1284_ecp_read_data (port, buf, + return parport_ieee1284_ecp_read_data(port, buf, length, flags); if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) { /* change to reverse-idle phase (must be in forward-idle) */ /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE, PARPORT_CONTROL_AUTOFD); - parport_pc_data_reverse (port); /* Must be in PS2 mode */ - udelay (5); + parport_pc_data_reverse(port); /* Must be in PS2 mode */ + udelay(5); /* Event 39: Set nInit low to initiate bus reversal */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT, 0); /* Event 40: Wait for nAckReverse (PError) to go low */ - r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); - if (r) { - printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) " + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0); + if (r) { + printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) " "in ecp_read_block_pio\n", port->name, r); return 0; } } /* Set up ECP FIFO mode.*/ -/* parport_pc_frob_control (port, +/* parport_pc_frob_control(port, PARPORT_CONTROL_STROBE | PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD); */ - r = change_mode (port, ECR_ECP); /* ECP FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + r = change_mode(port, ECR_ECP); /* ECP FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", + port->name); port->ieee1284.phase = IEEE1284_PH_REV_DATA; /* the first byte must be collected manually */ -dump_parport_state ("pre 43", port); + dump_parport_state("pre 43", port); /* Event 43: Wait for nAck to go low */ - r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0); + r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0); if (r) { /* timed out while reading -- no data */ - printk (KERN_DEBUG "PIO read timed out (initial byte)\n"); + printk(KERN_DEBUG "PIO read timed out (initial byte)\n"); goto out_no_data; } /* read byte */ - *bufp++ = inb (DATA (port)); + *bufp++ = inb(DATA(port)); left--; -dump_parport_state ("43-44", port); + dump_parport_state("43-44", port); /* Event 44: nAutoFd (HostAck) goes high to acknowledge */ - parport_pc_frob_control (port, + parport_pc_frob_control(port, PARPORT_CONTROL_AUTOFD, 0); -dump_parport_state ("pre 45", port); + dump_parport_state("pre 45", port); /* Event 45: Wait for nAck to go high */ -/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */ -dump_parport_state ("post 45", port); -r = 0; + /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, + PARPORT_STATUS_ACK); */ + dump_parport_state("post 45", port); + r = 0; if (r) { /* timed out while waiting for peripheral to respond to ack */ - printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n"); + printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n"); /* keep hold of the byte we've got already */ goto out_no_data; } /* Event 46: nAutoFd (HostAck) goes low to accept more data */ - parport_pc_frob_control (port, + parport_pc_frob_control(port, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD); -dump_parport_state ("rev idle", port); + dump_parport_state("rev idle", port); /* Do the transfer. */ while (left > fifofull) { int ret; unsigned long expire = jiffies + port->cad->timeout; - unsigned char ecrval = inb (ECONTROL (port)); + unsigned char ecrval = inb(ECONTROL(port)); - if (need_resched() && time_before (jiffies, expire)) + if (need_resched() && time_before(jiffies, expire)) /* Can't yield the port. */ - schedule (); + schedule(); /* At this point, the FIFO may already be full. In - * that case ECP is already holding back the - * peripheral (assuming proper design) with a delayed - * handshake. Work fast to avoid a peripheral - * timeout. */ + * that case ECP is already holding back the + * peripheral (assuming proper design) with a delayed + * handshake. Work fast to avoid a peripheral + * timeout. */ if (ecrval & 0x01) { /* FIFO is empty. Wait for interrupt. */ -dump_parport_state ("FIFO empty", port); + dump_parport_state("FIFO empty", port); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } /* Clear serviceIntr */ - ECR_WRITE (port, ecrval & ~(1<<2)); - false_alarm: -dump_parport_state ("waiting", port); - ret = parport_wait_event (port, HZ); -DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret); + ECR_WRITE(port, ecrval & ~(1<<2)); +false_alarm: + dump_parport_state("waiting", port); + ret = parport_wait_event(port, HZ); + DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n", + ret); if (ret < 0) break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ -dump_parport_state ("timeout", port); - printk (KERN_DEBUG "PIO read timed out\n"); + dump_parport_state("timeout", port); + printk(KERN_DEBUG "PIO read timed out\n"); break; } - ecrval = inb (ECONTROL (port)); + ecrval = inb(ECONTROL(port)); if (!(ecrval & (1<<2))) { if (need_resched() && - time_before (jiffies, expire)) { - schedule (); + time_before(jiffies, expire)) { + schedule(); } goto false_alarm; } /* Depending on how the FIFO threshold was - * set, how long interrupt service took, and - * how fast the peripheral is, we might be - * lucky and have a just filled FIFO. */ + * set, how long interrupt service took, and + * how fast the peripheral is, we might be + * lucky and have a just filled FIFO. */ continue; } if (ecrval & 0x02) { /* FIFO is full. */ -dump_parport_state ("FIFO full", port); - insb (fifo, bufp, fifo_depth); +dump_parport_state("FIFO full", port); + insb(fifo, bufp, fifo_depth); bufp += fifo_depth; left -= fifo_depth; continue; } -DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); +DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); /* FIFO not filled. We will cycle this loop for a while - * and either the peripheral will fill it faster, - * tripping a fast empty with insb, or we empty it. */ - *bufp++ = inb (fifo); + * and either the peripheral will fill it faster, + * tripping a fast empty with insb, or we empty it. */ + *bufp++ = inb(fifo); left--; } /* scoop up anything left in the FIFO */ - while (left && !(inb (ECONTROL (port) & 0x01))) { - *bufp++ = inb (fifo); + while (left && !(inb(ECONTROL(port) & 0x01))) { + *bufp++ = inb(fifo); left--; } port->ieee1284.phase = IEEE1284_PH_REV_IDLE; -dump_parport_state ("rev idle2", port); +dump_parport_state("rev idle2", port); out_no_data: /* Go to forward idle mode to shut the peripheral up (event 47). */ - parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); + parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); /* event 49: PError goes high */ - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - printk (KERN_DEBUG + printk(KERN_DEBUG "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n", port->name, r); } @@ -1141,14 +1156,14 @@ out_no_data: /* Finish up. */ { - int lost = get_fifo_residue (port); + int lost = get_fifo_residue(port); if (lost) /* Shouldn't happen with compliant peripherals. */ - printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n", + printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n", port->name, lost); } -dump_parport_state ("fwd idle", port); +dump_parport_state("fwd idle", port); return length - left; } #endif /* 0 */ @@ -1164,8 +1179,7 @@ dump_parport_state ("fwd idle", port); /* GCC is not inlining extern inline function later overwriten to non-inline, so we use outlined_ variants here. */ -static const struct parport_operations parport_pc_ops = -{ +static const struct parport_operations parport_pc_ops = { .write_data = parport_pc_write_data, .read_data = parport_pc_read_data, @@ -1205,46 +1219,52 @@ static const struct parport_operations parport_pc_ops = /* Super-IO chipset detection, Winbond, SMSC */ static void __devinit show_parconfig_smsc37c669(int io, int key) { - int cr1,cr4,cra,cr23,cr26,cr27,i=0; - static const char *const modes[]={ + int cr1, cr4, cra, cr23, cr26, cr27, i = 0; + static const char *const modes[] = { "SPP and Bidirectional (PS/2)", "EPP and SPP", "ECP", "ECP and EPP" }; - outb(key,io); - outb(key,io); - outb(1,io); - cr1=inb(io+1); - outb(4,io); - cr4=inb(io+1); - outb(0x0a,io); - cra=inb(io+1); - outb(0x23,io); - cr23=inb(io+1); - outb(0x26,io); - cr26=inb(io+1); - outb(0x27,io); - cr27=inb(io+1); - outb(0xaa,io); + outb(key, io); + outb(key, io); + outb(1, io); + cr1 = inb(io + 1); + outb(4, io); + cr4 = inb(io + 1); + outb(0x0a, io); + cra = inb(io + 1); + outb(0x23, io); + cr23 = inb(io + 1); + outb(0x26, io); + cr26 = inb(io + 1); + outb(0x27, io); + cr27 = inb(io + 1); + outb(0xaa, io); if (verbose_probing) { - printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " + printk(KERN_INFO + "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n", - cr1,cr4,cra,cr23,cr26,cr27); - + cr1, cr4, cra, cr23, cr26, cr27); + /* The documentation calls DMA and IRQ-Lines by letters, so the board maker can/will wire them appropriately/randomly... G=reserved H=IDE-irq, */ - printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, " - "fifo threshold=%d\n", cr23*4, - (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-', - (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f); + printk(KERN_INFO + "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n", + cr23 * 4, + (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-', + (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-', + cra & 0x0f); printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", - (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no"); - printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n", - (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], - (cr4 & 0x40) ? "1.7" : "1.9"); + (cr23 * 4 >= 0x100) ? "yes" : "no", + (cr1 & 4) ? "yes" : "no"); + printk(KERN_INFO + "SMSC LPT Config: Port mode=%s, EPP version =%s\n", + (cr1 & 0x08) ? "Standard mode only (SPP)" + : modes[cr4 & 0x03], + (cr4 & 0x40) ? "1.7" : "1.9"); } /* Heuristics ! BIOS setup for this mainboard device limits @@ -1258,32 +1278,32 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) printk(KERN_INFO "Super-IO: too many chips!\n"); } else { int d; - switch (cr23*4) { - case 0x3bc: - superios[i].io = 0x3bc; - superios[i].irq = 7; - break; - case 0x378: - superios[i].io = 0x378; - superios[i].irq = 7; - break; - case 0x278: - superios[i].io = 0x278; - superios[i].irq = 5; + switch (cr23 * 4) { + case 0x3bc: + superios[i].io = 0x3bc; + superios[i].irq = 7; + break; + case 0x378: + superios[i].io = 0x378; + superios[i].irq = 7; + break; + case 0x278: + superios[i].io = 0x278; + superios[i].irq = 5; } - d=(cr26 &0x0f); - if((d==1) || (d==3)) - superios[i].dma= d; + d = (cr26 & 0x0f); + if (d == 1 || d == 3) + superios[i].dma = d; else - superios[i].dma= PARPORT_DMA_NONE; + superios[i].dma = PARPORT_DMA_NONE; } - } + } } static void __devinit show_parconfig_winbond(int io, int key) { - int cr30,cr60,cr61,cr70,cr74,crf0,i=0; + int cr30, cr60, cr61, cr70, cr74, crf0, i = 0; static const char *const modes[] = { "Standard (SPP) and Bidirectional(PS/2)", /* 0 */ "EPP-1.9 and SPP", @@ -1296,40 +1316,43 @@ static void __devinit show_parconfig_winbond(int io, int key) static char *const irqtypes[] = { "pulsed low, high-Z", "follows nACK" }; - + /* The registers are called compatible-PnP because the - register layout is modelled after ISA-PnP, the access - method is just another ... */ - outb(key,io); - outb(key,io); - outb(0x07,io); /* Register 7: Select Logical Device */ - outb(0x01,io+1); /* LD1 is Parallel Port */ - outb(0x30,io); - cr30=inb(io+1); - outb(0x60,io); - cr60=inb(io+1); - outb(0x61,io); - cr61=inb(io+1); - outb(0x70,io); - cr70=inb(io+1); - outb(0x74,io); - cr74=inb(io+1); - outb(0xf0,io); - crf0=inb(io+1); - outb(0xaa,io); + register layout is modelled after ISA-PnP, the access + method is just another ... */ + outb(key, io); + outb(key, io); + outb(0x07, io); /* Register 7: Select Logical Device */ + outb(0x01, io + 1); /* LD1 is Parallel Port */ + outb(0x30, io); + cr30 = inb(io + 1); + outb(0x60, io); + cr60 = inb(io + 1); + outb(0x61, io); + cr61 = inb(io + 1); + outb(0x70, io); + cr70 = inb(io + 1); + outb(0x74, io); + cr74 = inb(io + 1); + outb(0xf0, io); + crf0 = inb(io + 1); + outb(0xaa, io); if (verbose_probing) { - printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x " - "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0); - printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", - (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f ); + printk(KERN_INFO + "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n", + cr30, cr60, cr61, cr70, cr74, crf0); + printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", + (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f); if ((cr74 & 0x07) > 3) printk("dma=none\n"); else - printk("dma=%d\n",cr74 & 0x07); - printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", - irqtypes[crf0>>7], (crf0>>3)&0x0f); - printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]); + printk("dma=%d\n", cr74 & 0x07); + printk(KERN_INFO + "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", + irqtypes[crf0>>7], (crf0>>3)&0x0f); + printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", + modes[crf0 & 0x07]); } if (cr30 & 0x01) { /* the settings can be interrogated later ... */ @@ -1346,60 +1369,82 @@ static void __devinit show_parconfig_winbond(int io, int key) } } -static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid) +static void __devinit decode_winbond(int efer, int key, int devid, + int devrev, int oldid) { const char *type = "unknown"; - int id,progif=2; + int id, progif = 2; if (devid == devrev) /* simple heuristics, we happened to read some - non-winbond register */ + non-winbond register */ return; - id=(devid<<8) | devrev; + id = (devid << 8) | devrev; /* Values are from public data sheets pdf files, I can just - confirm 83977TF is correct :-) */ - if (id == 0x9771) type="83977F/AF"; - else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x"; - else if (id == 0x9774) type="83977ATF"; - else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x"; - else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x"; - else if ((id & ~0x0f) == 0x5210) type="83627"; - else if ((id & ~0x0f) == 0x6010) type="83697HF"; - else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;} - else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;} - else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;} - else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;} - else progif=0; + confirm 83977TF is correct :-) */ + if (id == 0x9771) + type = "83977F/AF"; + else if (id == 0x9773) + type = "83977TF / SMSC 97w33x/97w34x"; + else if (id == 0x9774) + type = "83977ATF"; + else if ((id & ~0x0f) == 0x5270) + type = "83977CTF / SMSC 97w36x"; + else if ((id & ~0x0f) == 0x52f0) + type = "83977EF / SMSC 97w35x"; + else if ((id & ~0x0f) == 0x5210) + type = "83627"; + else if ((id & ~0x0f) == 0x6010) + type = "83697HF"; + else if ((oldid & 0x0f) == 0x0a) { + type = "83877F"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0b) { + type = "83877AF"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0c) { + type = "83877TF"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0d) { + type = "83877ATF"; + progif = 1; + } else + progif = 0; if (verbose_probing) printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " - "devid=%02x devrev=%02x oldid=%02x type=%s\n", + "devid=%02x devrev=%02x oldid=%02x type=%s\n", efer, key, devid, devrev, oldid, type); if (progif == 2) - show_parconfig_winbond(efer,key); + show_parconfig_winbond(efer, key); } static void __devinit decode_smsc(int efer, int key, int devid, int devrev) { - const char *type = "unknown"; + const char *type = "unknown"; void (*func)(int io, int key); - int id; + int id; - if (devid == devrev) + if (devid == devrev) /* simple heuristics, we happened to read some - non-smsc register */ + non-smsc register */ return; - func=NULL; - id=(devid<<8) | devrev; + func = NULL; + id = (devid << 8) | devrev; - if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;} - else if (id==0x6582) type="37c665IR"; - else if (devid==0x65) type="37c665GT"; - else if (devid==0x66) type="37c666GT"; + if (id == 0x0302) { + type = "37c669"; + func = show_parconfig_smsc37c669; + } else if (id == 0x6582) + type = "37c665IR"; + else if (devid == 0x65) + type = "37c665GT"; + else if (devid == 0x66) + type = "37c666GT"; if (verbose_probing) printk(KERN_INFO "SMSC chip at EFER=0x%x " @@ -1407,138 +1452,138 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev) efer, key, devid, devrev, type); if (func) - func(efer,key); + func(efer, key); } static void __devinit winbond_check(int io, int key) { - int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + int devid, devrev, oldid, x_devid, x_devrev, x_oldid; if (!request_region(io, 3, __func__)) return; /* First probe without key */ - outb(0x20,io); - x_devid=inb(io+1); - outb(0x21,io); - x_devrev=inb(io+1); - outb(0x09,io); - x_oldid=inb(io+1); - - outb(key,io); - outb(key,io); /* Write Magic Sequence to EFER, extended - funtion enable register */ - outb(0x20,io); /* Write EFIR, extended function index register */ - devid=inb(io+1); /* Read EFDR, extended function data register */ - outb(0x21,io); - devrev=inb(io+1); - outb(0x09,io); - oldid=inb(io+1); - outb(0xaa,io); /* Magic Seal */ + outb(0x20, io); + x_devid = inb(io + 1); + outb(0x21, io); + x_devrev = inb(io + 1); + outb(0x09, io); + x_oldid = inb(io + 1); + + outb(key, io); + outb(key, io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x20, io); /* Write EFIR, extended function index register */ + devid = inb(io + 1); /* Read EFDR, extended function data register */ + outb(0x21, io); + devrev = inb(io + 1); + outb(0x09, io); + oldid = inb(io + 1); + outb(0xaa, io); /* Magic Seal */ if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) goto out; /* protection against false positives */ - decode_winbond(io,key,devid,devrev,oldid); + decode_winbond(io, key, devid, devrev, oldid); out: release_region(io, 3); } -static void __devinit winbond_check2(int io,int key) +static void __devinit winbond_check2(int io, int key) { - int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + int devid, devrev, oldid, x_devid, x_devrev, x_oldid; if (!request_region(io, 3, __func__)) return; /* First probe without the key */ - outb(0x20,io+2); - x_devid=inb(io+2); - outb(0x21,io+1); - x_devrev=inb(io+2); - outb(0x09,io+1); - x_oldid=inb(io+2); - - outb(key,io); /* Write Magic Byte to EFER, extended - funtion enable register */ - outb(0x20,io+2); /* Write EFIR, extended function index register */ - devid=inb(io+2); /* Read EFDR, extended function data register */ - outb(0x21,io+1); - devrev=inb(io+2); - outb(0x09,io+1); - oldid=inb(io+2); - outb(0xaa,io); /* Magic Seal */ - - if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) + outb(0x20, io + 2); + x_devid = inb(io + 2); + outb(0x21, io + 1); + x_devrev = inb(io + 2); + outb(0x09, io + 1); + x_oldid = inb(io + 2); + + outb(key, io); /* Write Magic Byte to EFER, extended + funtion enable register */ + outb(0x20, io + 2); /* Write EFIR, extended function index register */ + devid = inb(io + 2); /* Read EFDR, extended function data register */ + outb(0x21, io + 1); + devrev = inb(io + 2); + outb(0x09, io + 1); + oldid = inb(io + 2); + outb(0xaa, io); /* Magic Seal */ + + if (x_devid == devid && x_devrev == devrev && x_oldid == oldid) goto out; /* protection against false positives */ - decode_winbond(io,key,devid,devrev,oldid); + decode_winbond(io, key, devid, devrev, oldid); out: release_region(io, 3); } static void __devinit smsc_check(int io, int key) { - int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev; + int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev; if (!request_region(io, 3, __func__)) return; /* First probe without the key */ - outb(0x0d,io); - x_oldid=inb(io+1); - outb(0x0e,io); - x_oldrev=inb(io+1); - outb(0x20,io); - x_id=inb(io+1); - outb(0x21,io); - x_rev=inb(io+1); - - outb(key,io); - outb(key,io); /* Write Magic Sequence to EFER, extended - funtion enable register */ - outb(0x0d,io); /* Write EFIR, extended function index register */ - oldid=inb(io+1); /* Read EFDR, extended function data register */ - outb(0x0e,io); - oldrev=inb(io+1); - outb(0x20,io); - id=inb(io+1); - outb(0x21,io); - rev=inb(io+1); - outb(0xaa,io); /* Magic Seal */ - - if ((x_id == id) && (x_oldrev == oldrev) && - (x_oldid == oldid) && (x_rev == rev)) + outb(0x0d, io); + x_oldid = inb(io + 1); + outb(0x0e, io); + x_oldrev = inb(io + 1); + outb(0x20, io); + x_id = inb(io + 1); + outb(0x21, io); + x_rev = inb(io + 1); + + outb(key, io); + outb(key, io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x0d, io); /* Write EFIR, extended function index register */ + oldid = inb(io + 1); /* Read EFDR, extended function data register */ + outb(0x0e, io); + oldrev = inb(io + 1); + outb(0x20, io); + id = inb(io + 1); + outb(0x21, io); + rev = inb(io + 1); + outb(0xaa, io); /* Magic Seal */ + + if (x_id == id && x_oldrev == oldrev && + x_oldid == oldid && x_rev == rev) goto out; /* protection against false positives */ - decode_smsc(io,key,oldid,oldrev); + decode_smsc(io, key, oldid, oldrev); out: release_region(io, 3); } -static void __devinit detect_and_report_winbond (void) -{ +static void __devinit detect_and_report_winbond(void) +{ if (verbose_probing) printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n"); - winbond_check(0x3f0,0x87); - winbond_check(0x370,0x87); - winbond_check(0x2e ,0x87); - winbond_check(0x4e ,0x87); - winbond_check(0x3f0,0x86); - winbond_check2(0x250,0x88); - winbond_check2(0x250,0x89); + winbond_check(0x3f0, 0x87); + winbond_check(0x370, 0x87); + winbond_check(0x2e , 0x87); + winbond_check(0x4e , 0x87); + winbond_check(0x3f0, 0x86); + winbond_check2(0x250, 0x88); + winbond_check2(0x250, 0x89); } -static void __devinit detect_and_report_smsc (void) +static void __devinit detect_and_report_smsc(void) { if (verbose_probing) printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n"); - smsc_check(0x3f0,0x55); - smsc_check(0x370,0x55); - smsc_check(0x3f0,0x44); - smsc_check(0x370,0x44); + smsc_check(0x3f0, 0x55); + smsc_check(0x370, 0x55); + smsc_check(0x3f0, 0x44); + smsc_check(0x370, 0x44); } static void __devinit detect_and_report_it87(void) @@ -1573,7 +1618,7 @@ static void __devinit detect_and_report_it87(void) } #endif /* CONFIG_PARPORT_PC_SUPERIO */ -static int get_superio_dma (struct parport *p) +static int get_superio_dma(struct parport *p) { int i = 0; @@ -1584,15 +1629,15 @@ static int get_superio_dma (struct parport *p) return PARPORT_DMA_NONE; } -static int get_superio_irq (struct parport *p) +static int get_superio_irq(struct parport *p) { int i = 0; - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].irq; - return PARPORT_IRQ_NONE; + while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) + i++; + if (i != NR_SUPERIOS) + return superios[i].irq; + return PARPORT_IRQ_NONE; } @@ -1600,9 +1645,9 @@ static int get_superio_irq (struct parport *p) /* * Checks for port existence, all ports support SPP MODE - * Returns: + * Returns: * 0 : No parallel port at this address - * PARPORT_MODE_PCSPP : SPP port detected + * PARPORT_MODE_PCSPP : SPP port detected * (if the user specified an ioport himself, * this shall always be the case!) * @@ -1612,7 +1657,7 @@ static int parport_SPP_supported(struct parport *pb) unsigned char r, w; /* - * first clear an eventually pending EPP timeout + * first clear an eventually pending EPP timeout * I (sailer@ife.ee.ethz.ch) have an SMSC chipset * that does not even respond to SPP cycles if an EPP * timeout is pending @@ -1621,19 +1666,19 @@ static int parport_SPP_supported(struct parport *pb) /* Do a simple read-write test to make sure the port exists. */ w = 0xc; - outb (w, CONTROL (pb)); + outb(w, CONTROL(pb)); /* Is there a control register that we can read from? Some * ports don't allow reads, so read_control just returns a * software copy. Some ports _do_ allow reads, so bypass the * software copy here. In addition, some bits aren't * writable. */ - r = inb (CONTROL (pb)); + r = inb(CONTROL(pb)); if ((r & 0xf) == w) { w = 0xe; - outb (w, CONTROL (pb)); - r = inb (CONTROL (pb)); - outb (0xc, CONTROL (pb)); + outb(w, CONTROL(pb)); + r = inb(CONTROL(pb)); + outb(0xc, CONTROL(pb)); if ((r & 0xf) == w) return PARPORT_MODE_PCSPP; } @@ -1641,18 +1686,18 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) /* That didn't work, but the user thinks there's a * port here. */ - printk (KERN_INFO "parport 0x%lx (WARNING): CTR: " + printk(KERN_INFO "parport 0x%lx (WARNING): CTR: " "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); /* Try the data register. The data lines aren't tri-stated at * this stage, so we expect back what we wrote. */ w = 0xaa; - parport_pc_write_data (pb, w); - r = parport_pc_read_data (pb); + parport_pc_write_data(pb, w); + r = parport_pc_read_data(pb); if (r == w) { w = 0x55; - parport_pc_write_data (pb, w); - r = parport_pc_read_data (pb); + parport_pc_write_data(pb, w); + r = parport_pc_read_data(pb); if (r == w) return PARPORT_MODE_PCSPP; } @@ -1660,9 +1705,9 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) { /* Didn't work, but the user is convinced this is the * place. */ - printk (KERN_INFO "parport 0x%lx (WARNING): DATA: " + printk(KERN_INFO "parport 0x%lx (WARNING): DATA: " "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); - printk (KERN_INFO "parport 0x%lx: You gave this address, " + printk(KERN_INFO "parport 0x%lx: You gave this address, " "but there is probably no parallel port there!\n", pb->base); } @@ -1693,33 +1738,33 @@ static int parport_ECR_present(struct parport *pb) struct parport_pc_private *priv = pb->private_data; unsigned char r = 0xc; - outb (r, CONTROL (pb)); - if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) { - outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */ + outb(r, CONTROL(pb)); + if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) { + outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */ - r = inb (CONTROL (pb)); - if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2)) + r = inb(CONTROL(pb)); + if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2)) goto no_reg; /* Sure that no ECR register exists */ } - - if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1) + + if ((inb(ECONTROL(pb)) & 0x3) != 0x1) goto no_reg; - ECR_WRITE (pb, 0x34); - if (inb (ECONTROL (pb)) != 0x35) + ECR_WRITE(pb, 0x34); + if (inb(ECONTROL(pb)) != 0x35) goto no_reg; priv->ecr = 1; - outb (0xc, CONTROL (pb)); - + outb(0xc, CONTROL(pb)); + /* Go to mode 000 */ - frob_set_mode (pb, ECR_SPP); + frob_set_mode(pb, ECR_SPP); return 1; no_reg: - outb (0xc, CONTROL (pb)); - return 0; + outb(0xc, CONTROL(pb)); + return 0; } #ifdef CONFIG_PARPORT_1284 @@ -1729,7 +1774,7 @@ static int parport_ECR_present(struct parport *pb) * allows us to read data from the data lines. In theory we would get back * 0xff but any peripheral attached to the port may drag some or all of the * lines down to zero. So if we get back anything that isn't the contents - * of the data register we deem PS/2 support to be present. + * of the data register we deem PS/2 support to be present. * * Some SPP ports have "half PS/2" ability - you can't turn off the line * drivers, but an external peripheral with sufficiently beefy drivers of @@ -1737,26 +1782,28 @@ static int parport_ECR_present(struct parport *pb) * where they can then be read back as normal. Ports with this property * and the right type of device attached are likely to fail the SPP test, * (as they will appear to have stuck bits) and so the fact that they might - * be misdetected here is rather academic. + * be misdetected here is rather academic. */ static int parport_PS2_supported(struct parport *pb) { int ok = 0; - + clear_epp_timeout(pb); /* try to tri-state the buffer */ - parport_pc_data_reverse (pb); - + parport_pc_data_reverse(pb); + parport_pc_write_data(pb, 0x55); - if (parport_pc_read_data(pb) != 0x55) ok++; + if (parport_pc_read_data(pb) != 0x55) + ok++; parport_pc_write_data(pb, 0xaa); - if (parport_pc_read_data(pb) != 0xaa) ok++; + if (parport_pc_read_data(pb) != 0xaa) + ok++; /* cancel input mode */ - parport_pc_data_forward (pb); + parport_pc_data_forward(pb); if (ok) { pb->modes |= PARPORT_MODE_TRISTATE; @@ -1775,68 +1822,68 @@ static int parport_ECP_supported(struct parport *pb) int config, configb; int pword; struct parport_pc_private *priv = pb->private_data; - /* Translate ECP intrLine to ISA irq value */ - static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; + /* Translate ECP intrLine to ISA irq value */ + static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 }; /* If there is no ECR, we have no hope of supporting ECP. */ if (!priv->ecr) return 0; /* Find out FIFO depth */ - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */ - for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++) - outb (0xaa, FIFO (pb)); + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */ + for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++) + outb(0xaa, FIFO(pb)); /* * Using LGS chipset it uses ECR register, but * it doesn't support ECP or FIFO MODE */ if (i == 1024) { - ECR_WRITE (pb, ECR_SPP << 5); + ECR_WRITE(pb, ECR_SPP << 5); return 0; } priv->fifo_depth = i; if (verbose_probing) - printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); + printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); /* Find out writeIntrThreshold */ - frob_econtrol (pb, 1<<2, 1<<2); - frob_econtrol (pb, 1<<2, 0); + frob_econtrol(pb, 1<<2, 1<<2); + frob_econtrol(pb, 1<<2, 0); for (i = 1; i <= priv->fifo_depth; i++) { - inb (FIFO (pb)); - udelay (50); - if (inb (ECONTROL (pb)) & (1<<2)) + inb(FIFO(pb)); + udelay(50); + if (inb(ECONTROL(pb)) & (1<<2)) break; } if (i <= priv->fifo_depth) { if (verbose_probing) - printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", + printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", pb->base, i); } else /* Number of bytes we know we can write if we get an - interrupt. */ + interrupt. */ i = 0; priv->writeIntrThreshold = i; /* Find out readIntrThreshold */ - frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */ - parport_pc_data_reverse (pb); /* Must be in PS2 mode */ - frob_set_mode (pb, ECR_TST); /* Test FIFO */ - frob_econtrol (pb, 1<<2, 1<<2); - frob_econtrol (pb, 1<<2, 0); + frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */ + parport_pc_data_reverse(pb); /* Must be in PS2 mode */ + frob_set_mode(pb, ECR_TST); /* Test FIFO */ + frob_econtrol(pb, 1<<2, 1<<2); + frob_econtrol(pb, 1<<2, 0); for (i = 1; i <= priv->fifo_depth; i++) { - outb (0xaa, FIFO (pb)); - if (inb (ECONTROL (pb)) & (1<<2)) + outb(0xaa, FIFO(pb)); + if (inb(ECONTROL(pb)) & (1<<2)) break; } if (i <= priv->fifo_depth) { if (verbose_probing) - printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n", + printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n", pb->base, i); } else /* Number of bytes we can read if we get an interrupt. */ @@ -1844,23 +1891,23 @@ static int parport_ECP_supported(struct parport *pb) priv->readIntrThreshold = i; - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, 0xf4); /* Configuration mode */ - config = inb (CONFIGA (pb)); + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, 0xf4); /* Configuration mode */ + config = inb(CONFIGA(pb)); pword = (config >> 4) & 0x7; switch (pword) { case 0: pword = 2; - printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", pb->base); break; case 2: pword = 4; - printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", pb->base); break; default: - printk (KERN_WARNING "0x%lx: Unknown implementation ID\n", + printk(KERN_WARNING "0x%lx: Unknown implementation ID\n", pb->base); /* Assume 1 */ case 1: @@ -1869,28 +1916,29 @@ static int parport_ECP_supported(struct parport *pb) priv->pword = pword; if (verbose_probing) { - printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword); - - printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, + printk(KERN_DEBUG "0x%lx: PWord is %d bits\n", + pb->base, 8 * pword); + + printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, config & 0x80 ? "Level" : "Pulses"); - configb = inb (CONFIGB (pb)); - printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", + configb = inb(CONFIGB(pb)); + printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", pb->base, config, configb); - printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); - if ((configb >>3) & 0x07) - printk("%d",intrline[(configb >>3) & 0x07]); + printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); + if ((configb >> 3) & 0x07) + printk("%d", intrline[(configb >> 3) & 0x07]); else printk(""); - printk (" dma="); - if( (configb & 0x03 ) == 0x00) + printk(" dma="); + if ((configb & 0x03) == 0x00) printk("\n"); else - printk("%d\n",configb & 0x07); + printk("%d\n", configb & 0x07); } /* Go back to mode 000 */ - frob_set_mode (pb, ECR_SPP); + frob_set_mode(pb, ECR_SPP); return 1; } @@ -1905,10 +1953,10 @@ static int parport_ECPPS2_supported(struct parport *pb) if (!priv->ecr) return 0; - oecr = inb (ECONTROL (pb)); - ECR_WRITE (pb, ECR_PS2 << 5); + oecr = inb(ECONTROL(pb)); + ECR_WRITE(pb, ECR_PS2 << 5); result = parport_PS2_supported(pb); - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); return result; } @@ -1932,16 +1980,15 @@ static int parport_EPP_supported(struct parport *pb) */ /* If EPP timeout bit clear then EPP available */ - if (!clear_epp_timeout(pb)) { + if (!clear_epp_timeout(pb)) return 0; /* No way to clear timeout */ - } /* Check for Intel bug. */ if (priv->ecr) { unsigned char i; for (i = 0x00; i < 0x80; i += 0x20) { - ECR_WRITE (pb, i); - if (clear_epp_timeout (pb)) { + ECR_WRITE(pb, i); + if (clear_epp_timeout(pb)) { /* Phony EPP in ECP. */ return 0; } @@ -1965,17 +2012,16 @@ static int parport_ECPEPP_supported(struct parport *pb) int result; unsigned char oecr; - if (!priv->ecr) { + if (!priv->ecr) return 0; - } - oecr = inb (ECONTROL (pb)); + oecr = inb(ECONTROL(pb)); /* Search for SMC style EPP+ECP mode */ - ECR_WRITE (pb, 0x80); - outb (0x04, CONTROL (pb)); + ECR_WRITE(pb, 0x80); + outb(0x04, CONTROL(pb)); result = parport_EPP_supported(pb); - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); if (result) { /* Set up access functions to use ECP+EPP hardware. */ @@ -1993,11 +2039,25 @@ static int parport_ECPEPP_supported(struct parport *pb) /* Don't bother probing for modes we know we won't use. */ static int __devinit parport_PS2_supported(struct parport *pb) { return 0; } #ifdef CONFIG_PARPORT_PC_FIFO -static int parport_ECP_supported(struct parport *pb) { return 0; } +static int parport_ECP_supported(struct parport *pb) +{ + return 0; +} #endif -static int __devinit parport_EPP_supported(struct parport *pb) { return 0; } -static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;} -static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;} +static int __devinit parport_EPP_supported(struct parport *pb) +{ + return 0; +} + +static int __devinit parport_ECPEPP_supported(struct parport *pb) +{ + return 0; +} + +static int __devinit parport_ECPPS2_supported(struct parport *pb) +{ + return 0; +} #endif /* No IEEE 1284 support */ @@ -2007,17 +2067,17 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;} static int programmable_irq_support(struct parport *pb) { int irq, intrLine; - unsigned char oecr = inb (ECONTROL (pb)); + unsigned char oecr = inb(ECONTROL(pb)); static const int lookup[8] = { PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5 }; - ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */ + ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */ - intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07; + intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07; irq = lookup[intrLine]; - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); return irq; } @@ -2027,17 +2087,17 @@ static int irq_probe_ECP(struct parport *pb) unsigned long irqs; irqs = probe_irq_on(); - - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, (ECR_TST << 5) | 0x04); - ECR_WRITE (pb, ECR_TST << 5); + + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, (ECR_TST << 5) | 0x04); + ECR_WRITE(pb, ECR_TST << 5); /* If Full FIFO sure that writeIntrThreshold is generated */ - for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) - outb (0xaa, FIFO (pb)); - + for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++) + outb(0xaa, FIFO(pb)); + pb->irq = probe_irq_off(irqs); - ECR_WRITE (pb, ECR_SPP << 5); + ECR_WRITE(pb, ECR_SPP << 5); if (pb->irq <= 0) pb->irq = PARPORT_IRQ_NONE; @@ -2047,7 +2107,7 @@ static int irq_probe_ECP(struct parport *pb) /* * This detection seems that only works in National Semiconductors - * This doesn't work in SMC, LGS, and Winbond + * This doesn't work in SMC, LGS, and Winbond */ static int irq_probe_EPP(struct parport *pb) { @@ -2058,16 +2118,16 @@ static int irq_probe_EPP(struct parport *pb) unsigned char oecr; if (pb->modes & PARPORT_MODE_PCECR) - oecr = inb (ECONTROL (pb)); + oecr = inb(ECONTROL(pb)); irqs = probe_irq_on(); if (pb->modes & PARPORT_MODE_PCECR) - frob_econtrol (pb, 0x10, 0x10); - + frob_econtrol(pb, 0x10, 0x10); + clear_epp_timeout(pb); - parport_pc_frob_control (pb, 0x20, 0x20); - parport_pc_frob_control (pb, 0x10, 0x10); + parport_pc_frob_control(pb, 0x20, 0x20); + parport_pc_frob_control(pb, 0x10, 0x10); clear_epp_timeout(pb); /* Device isn't expecting an EPP read @@ -2076,9 +2136,9 @@ static int irq_probe_EPP(struct parport *pb) parport_pc_read_epp(pb); udelay(20); - pb->irq = probe_irq_off (irqs); + pb->irq = probe_irq_off(irqs); if (pb->modes & PARPORT_MODE_PCECR) - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); parport_pc_write_control(pb, 0xc); if (pb->irq <= 0) @@ -2135,28 +2195,28 @@ static int parport_irq_probe(struct parport *pb) /* --- DMA detection -------------------------------------- */ /* Only if chipset conforms to ECP ISA Interface Standard */ -static int programmable_dma_support (struct parport *p) +static int programmable_dma_support(struct parport *p) { - unsigned char oecr = inb (ECONTROL (p)); + unsigned char oecr = inb(ECONTROL(p)); int dma; - frob_set_mode (p, ECR_CNF); - - dma = inb (CONFIGB(p)) & 0x07; + frob_set_mode(p, ECR_CNF); + + dma = inb(CONFIGB(p)) & 0x07; /* 000: Indicates jumpered 8-bit DMA if read-only. 100: Indicates jumpered 16-bit DMA if read-only. */ if ((dma & 0x03) == 0) dma = PARPORT_DMA_NONE; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); return dma; } -static int parport_dma_probe (struct parport *p) +static int parport_dma_probe(struct parport *p) { const struct parport_pc_private *priv = p->private_data; - if (priv->ecr) - p->dma = programmable_dma_support(p); /* ask ECP chipset first */ + if (priv->ecr) /* ask ECP chipset first */ + p->dma = programmable_dma_support(p); if (p->dma == PARPORT_DMA_NONE) { /* ask known Super-IO chips proper, although these claim ECP compatible, some don't report their DMA @@ -2214,7 +2274,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (!base_res) goto out4; - memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations)); + memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations)); priv->ctr = 0xc; priv->ctr_writable = ~0x10; priv->ecr = 0; @@ -2241,7 +2301,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (!parport_EPP_supported(p)) parport_ECPEPP_supported(p); } - if (!parport_SPP_supported (p)) + if (!parport_SPP_supported(p)) /* No port. */ goto out5; if (priv->ecr) @@ -2249,7 +2309,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, else parport_PS2_supported(p); - p->size = (p->modes & PARPORT_MODE_EPP)?8:3; + p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3; printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); if (p->base_hi && priv->ecr) @@ -2273,7 +2333,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, } } if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq - is mandatory (see above) */ + is mandatory (see above) */ p->dma = PARPORT_DMA_NONE; #ifdef CONFIG_PARPORT_PC_FIFO @@ -2290,16 +2350,23 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (p->dma != PARPORT_DMA_NONE) { printk(", dma %d", p->dma); p->modes |= PARPORT_MODE_DMA; - } - else printk(", using FIFO"); - } - else + } else + printk(", using FIFO"); + } else /* We can't use the DMA channel after all. */ p->dma = PARPORT_DMA_NONE; #endif /* Allowed to use FIFO/DMA */ printk(" ["); -#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}} + +#define printmode(x) \ + {\ + if (p->modes & PARPORT_MODE_##x) {\ + printk("%s%s", f ? "," : "", #x);\ + f++;\ + } \ + } + { int f = 0; printmode(PCSPP); @@ -2311,10 +2378,10 @@ struct parport *parport_pc_probe_port(unsigned long int base, } #undef printmode #ifndef CONFIG_PARPORT_1284 - printk ("(,...)"); + printk("(,...)"); #endif /* CONFIG_PARPORT_1284 */ printk("]\n"); - if (probedirq != PARPORT_IRQ_NONE) + if (probedirq != PARPORT_IRQ_NONE) printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); /* If No ECP release the ports grabbed above. */ @@ -2330,7 +2397,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (p->irq != PARPORT_IRQ_NONE) { if (request_irq(p->irq, parport_irq_handler, irqflags, p->name, p)) { - printk (KERN_WARNING "%s: irq %d in use, " + printk(KERN_WARNING "%s: irq %d in use, " "resorting to polled operation\n", p->name, p->irq); p->irq = PARPORT_IRQ_NONE; @@ -2340,8 +2407,8 @@ struct parport *parport_pc_probe_port(unsigned long int base, #ifdef CONFIG_PARPORT_PC_FIFO #ifdef HAS_DMA if (p->dma != PARPORT_DMA_NONE) { - if (request_dma (p->dma, p->name)) { - printk (KERN_WARNING "%s: dma %d in use, " + if (request_dma(p->dma, p->name)) { + printk(KERN_WARNING "%s: dma %d in use, " "resorting to PIO operation\n", p->name, p->dma); p->dma = PARPORT_DMA_NONE; @@ -2351,8 +2418,8 @@ struct parport *parport_pc_probe_port(unsigned long int base, PAGE_SIZE, &priv->dma_handle, GFP_KERNEL); - if (! priv->dma_buf) { - printk (KERN_WARNING "%s: " + if (!priv->dma_buf) { + printk(KERN_WARNING "%s: " "cannot get buffer for DMA, " "resorting to PIO operation\n", p->name); @@ -2371,10 +2438,10 @@ struct parport *parport_pc_probe_port(unsigned long int base, * Put the ECP detected port in PS2 mode. * Do this also for ports that have ECR but don't do ECP. */ - ECR_WRITE (p, 0x34); + ECR_WRITE(p, 0x34); parport_pc_write_data(p, 0); - parport_pc_data_forward (p); + parport_pc_data_forward(p); /* Now that we've told the sharing engine about the port, and found out its characteristics, let the high-level drivers @@ -2382,7 +2449,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, spin_lock(&ports_lock); list_add(&priv->list, &ports_list); spin_unlock(&ports_lock); - parport_announce_port (p); + parport_announce_port(p); return p; @@ -2395,18 +2462,17 @@ out5: out4: parport_put_port(p); out3: - kfree (priv); + kfree(priv); out2: - kfree (ops); + kfree(ops); out1: if (pdev) platform_device_unregister(pdev); return NULL; } +EXPORT_SYMBOL(parport_pc_probe_port); -EXPORT_SYMBOL (parport_pc_probe_port); - -void parport_pc_unregister_port (struct parport *p) +void parport_pc_unregister_port(struct parport *p) { struct parport_pc_private *priv = p->private_data; struct parport_operations *ops = p->ops; @@ -2432,17 +2498,16 @@ void parport_pc_unregister_port (struct parport *p) priv->dma_buf, priv->dma_handle); #endif - kfree (p->private_data); + kfree(p->private_data); parport_put_port(p); - kfree (ops); /* hope no-one cached it */ + kfree(ops); /* hope no-one cached it */ } - -EXPORT_SYMBOL (parport_pc_unregister_port); +EXPORT_SYMBOL(parport_pc_unregister_port); #ifdef CONFIG_PCI /* ITE support maintained by Rich Liu */ -static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, +static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, const struct parport_pc_via_data *via) { @@ -2454,73 +2519,74 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, int irq; int i; - DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n"); - - // make sure which one chip - for(i = 0; i < 5; i++) { + DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n"); + + /* make sure which one chip */ + for (i = 0; i < 5; i++) { base_res = request_region(inta_addr[i], 32, "it887x"); if (base_res) { int test; - pci_write_config_dword (pdev, 0x60, + pci_write_config_dword(pdev, 0x60, 0xe5000000 | inta_addr[i]); - pci_write_config_dword (pdev, 0x78, + pci_write_config_dword(pdev, 0x78, 0x00000000 | inta_addr[i]); - test = inb (inta_addr[i]); - if (test != 0xff) break; + test = inb(inta_addr[i]); + if (test != 0xff) + break; release_region(inta_addr[i], 0x8); } } - if(i >= 5) { - printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); + if (i >= 5) { + printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); return 0; } - type = inb (inta_addr[i] + 0x18); + type = inb(inta_addr[i] + 0x18); type &= 0x0f; switch (type) { case 0x2: - printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n"); + printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n"); ite8872set = 0x64200000; break; case 0xa: - printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n"); + printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n"); ite8872set = 0x64200000; break; case 0xe: - printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); + printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); ite8872set = 0x64e00000; break; case 0x6: - printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n"); + printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); return 0; case 0x8: - DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); + DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); return 0; default: - printk (KERN_INFO "parport_pc: unknown ITE887x\n"); - printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' " + printk(KERN_INFO "parport_pc: unknown ITE887x\n"); + printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' " "output to Rich.Liu@ite.com.tw\n"); return 0; } - pci_read_config_byte (pdev, 0x3c, &ite8872_irq); - pci_read_config_dword (pdev, 0x1c, &ite8872_lpt); + pci_read_config_byte(pdev, 0x3c, &ite8872_irq); + pci_read_config_dword(pdev, 0x1c, &ite8872_lpt); ite8872_lpt &= 0x0000ff00; - pci_read_config_dword (pdev, 0x20, &ite8872_lpthi); + pci_read_config_dword(pdev, 0x20, &ite8872_lpthi); ite8872_lpthi &= 0x0000ff00; - pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt); - pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi); - pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt); - // SET SPP&EPP , Parallel Port NO DMA , Enable All Function - // SET Parallel IRQ - pci_write_config_dword (pdev, 0x9c, + pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt); + pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi); + pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt); + /* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */ + /* SET Parallel IRQ */ + pci_write_config_dword(pdev, 0x9c, ite8872set | (ite8872_irq * 0x11111)); - DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); - DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", + DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); + DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", ite8872_lpt); - DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", + DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", ite8872_lpthi); /* Let the user (or defaults) steer us away from interrupts */ @@ -2532,14 +2598,14 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, * Release the resource so that parport_pc_probe_port can get it. */ release_resource(base_res); - if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi, + if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi, irq, PARPORT_DMA_NONE, &pdev->dev, 0)) { - printk (KERN_INFO + printk(KERN_INFO "parport_pc: ITE 8872 parallel port: io=0x%X", - ite8872_lpt); + ite8872_lpt); if (irq != PARPORT_IRQ_NONE) - printk (", irq=%d", irq); - printk ("\n"); + printk(", irq=%d", irq); + printk("\n"); return 1; } @@ -2548,7 +2614,7 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, /* VIA 8231 support by Pavel Fedin based on VIA 686a support code by Jeff Garzik */ -static int __devinitdata parport_init_mode = 0; +static int __devinitdata parport_init_mode; /* Data for two known VIA chips */ static struct parport_pc_via_data via_686a_data __devinitdata = { @@ -2570,7 +2636,7 @@ static struct parport_pc_via_data via_8231_data __devinitdata = { 0xF6 }; -static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, +static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, const struct parport_pc_via_data *via) { @@ -2582,38 +2648,38 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n"); - switch(parport_init_mode) - { + switch (parport_init_mode) { case 1: - printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_SPP; - break; + printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + break; case 2: - printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); - siofunc = VIA_FUNCTION_PARPORT_SPP; - ppcontrol = VIA_PARPORT_BIDIR; - break; + printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + ppcontrol = VIA_PARPORT_BIDIR; + break; case 3: - printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_EPP; - ppcontrol = VIA_PARPORT_BIDIR; - have_epp = 1; - break; + printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_EPP; + ppcontrol = VIA_PARPORT_BIDIR; + have_epp = 1; + break; case 4: - printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_ECP; - ppcontrol = VIA_PARPORT_BIDIR; - break; + printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR; + break; case 5: - printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_ECP; - ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP; - have_epp = 1; - break; - default: - printk(KERN_DEBUG "parport_pc: probing current configuration\n"); - siofunc = VIA_FUNCTION_PROBE; - break; + printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP; + have_epp = 1; + break; + default: + printk(KERN_DEBUG + "parport_pc: probing current configuration\n"); + siofunc = VIA_FUNCTION_PROBE; + break; } /* * unlock super i/o configuration @@ -2624,38 +2690,36 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, /* Bits 1-0: Parallel Port Mode / Enable */ outb(via->viacfg_function, VIA_CONFIG_INDEX); - tmp = inb (VIA_CONFIG_DATA); + tmp = inb(VIA_CONFIG_DATA); /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); - tmp2 = inb (VIA_CONFIG_DATA); - if (siofunc == VIA_FUNCTION_PROBE) - { - siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE; - ppcontrol = tmp2; + tmp2 = inb(VIA_CONFIG_DATA); + if (siofunc == VIA_FUNCTION_PROBE) { + siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE; + ppcontrol = tmp2; + } else { + tmp &= ~VIA_FUNCTION_PARPORT_DISABLE; + tmp |= siofunc; + outb(via->viacfg_function, VIA_CONFIG_INDEX); + outb(tmp, VIA_CONFIG_DATA); + tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP); + tmp2 |= ppcontrol; + outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); + outb(tmp2, VIA_CONFIG_DATA); } - else - { - tmp &= ~VIA_FUNCTION_PARPORT_DISABLE; - tmp |= siofunc; - outb(via->viacfg_function, VIA_CONFIG_INDEX); - outb(tmp, VIA_CONFIG_DATA); - tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP); - tmp2 |= ppcontrol; - outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); - outb(tmp2, VIA_CONFIG_DATA); - } - + /* Parallel Port I/O Base Address, bits 9-2 */ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); port1 = inb(VIA_CONFIG_DATA) << 2; - - printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1); - if ((port1 == 0x3BC) && have_epp) - { - outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); - outb((0x378 >> 2), VIA_CONFIG_DATA); - printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n"); - port1 = 0x378; + + printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n", + port1); + if (port1 == 0x3BC && have_epp) { + outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); + outb((0x378 >> 2), VIA_CONFIG_DATA); + printk(KERN_DEBUG + "parport_pc: Parallel port base changed to 0x378\n"); + port1 = 0x378; } /* @@ -2669,36 +2733,39 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); return 0; } - + /* Bits 7-4: PnP Routing for Parallel Port IRQ */ pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp); irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4); - if (siofunc == VIA_FUNCTION_PARPORT_ECP) - { - /* Bits 3-2: PnP Routing for Parallel Port DMA */ - pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp); - dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2); - } - else - /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */ - dma = PARPORT_DMA_NONE; + if (siofunc == VIA_FUNCTION_PARPORT_ECP) { + /* Bits 3-2: PnP Routing for Parallel Port DMA */ + pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp); + dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2); + } else + /* if ECP not enabled, DMA is not enabled, assumed + bogus 'dma' value */ + dma = PARPORT_DMA_NONE; /* Let the user (or defaults) steer us away from interrupts and DMA */ if (autoirq == PARPORT_IRQ_NONE) { - irq = PARPORT_IRQ_NONE; - dma = PARPORT_DMA_NONE; + irq = PARPORT_IRQ_NONE; + dma = PARPORT_DMA_NONE; } if (autodma == PARPORT_DMA_NONE) - dma = PARPORT_DMA_NONE; + dma = PARPORT_DMA_NONE; switch (port1) { - case 0x3bc: port2 = 0x7bc; break; - case 0x378: port2 = 0x778; break; - case 0x278: port2 = 0x678; break; + case 0x3bc: + port2 = 0x7bc; break; + case 0x378: + port2 = 0x778; break; + case 0x278: + port2 = 0x678; break; default: - printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n", - port1); + printk(KERN_INFO + "parport_pc: Weird VIA parport base 0x%X, ignoring\n", + port1); return 0; } @@ -2716,17 +2783,17 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, } /* finally, do the probe with values obtained */ - if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) { - printk (KERN_INFO + if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) { + printk(KERN_INFO "parport_pc: VIA parallel port: io=0x%X", port1); if (irq != PARPORT_IRQ_NONE) - printk (", irq=%d", irq); + printk(", irq=%d", irq); if (dma != PARPORT_DMA_NONE) - printk (", dma=%d", dma); - printk ("\n"); + printk(", dma=%d", dma); + printk("\n"); return 1; } - + printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", port1, irq, dma); return 0; @@ -2734,8 +2801,8 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, enum parport_pc_sio_types { - sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */ - sio_via_8231, /* Via VT8231 south bridge integrated Super IO */ + sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */ + sio_via_8231, /* Via VT8231 south bridge integrated Super IO */ sio_ite_8872, last_sio }; @@ -2806,15 +2873,15 @@ enum parport_pc_pci_cards { }; -/* each element directly indexed from enum list, above +/* each element directly indexed from enum list, above * (but offset by last_sio) */ static struct parport_pc_pci { int numports; struct { /* BAR (base address registers) numbers in the config - space header */ + space header */ int lo; - int hi; /* -1 if not there, >6 for offset-method (max - BAR is 6) */ + int hi; + /* -1 if not there, >6 for offset-method (max BAR is 6) */ } addr[4]; /* If set, this is called immediately after pci_enable_device. @@ -2859,7 +2926,7 @@ static struct parport_pc_pci { /* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* SYBA uses fixed offsets in - a 1K io window */ + a 1K io window */ /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } }, /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } }, /* titan_010l */ { 1, { { 3, -1 }, } }, @@ -2875,11 +2942,14 @@ static struct parport_pc_pci { /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, - /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */ - /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ - /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ - /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */ - /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */ + + /* The netmos entries below are untested */ + /* netmos_9705 */ { 1, { { 0, -1 }, } }, + /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, + /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, + /* netmos_9805 */ { 1, { { 0, -1 }, } }, + /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, + /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -2908,7 +2978,7 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 }, + PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 }, /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/ { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a }, { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h }, @@ -2942,7 +3012,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 }, { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 }, /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ - { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */ + /* AFAVLAB_TK9902 */ + { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p}, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 }, @@ -2985,14 +3056,14 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, { 0, } /* terminate list */ }; -MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl); +MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl); struct pci_parport_data { int num; struct parport *ports[2]; }; -static int parport_pc_pci_probe (struct pci_dev *dev, +static int parport_pc_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { int err, count, n, i = id->driver_data; @@ -3005,7 +3076,8 @@ static int parport_pc_pci_probe (struct pci_dev *dev, /* This is a PCI card */ i -= last_sio; count = 0; - if ((err = pci_enable_device (dev)) != 0) + err = pci_enable_device(dev); + if (err) return err; data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL); @@ -3013,7 +3085,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev, return -ENOMEM; if (cards[i].preinit_hook && - cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) { + cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) { kfree(data); return -ENODEV; } @@ -3023,25 +3095,25 @@ static int parport_pc_pci_probe (struct pci_dev *dev, int hi = cards[i].addr[n].hi; int irq; unsigned long io_lo, io_hi; - io_lo = pci_resource_start (dev, lo); + io_lo = pci_resource_start(dev, lo); io_hi = 0; if ((hi >= 0) && (hi <= 6)) - io_hi = pci_resource_start (dev, hi); + io_hi = pci_resource_start(dev, hi); else if (hi > 6) io_lo += hi; /* Reinterpret the meaning of - "hi" as an offset (see SYBA - def.) */ + "hi" as an offset (see SYBA + def.) */ /* TODO: test if sharing interrupts works */ irq = dev->irq; if (irq == IRQ_NONE) { - printk (KERN_DEBUG + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n", parport_pc_pci_tbl[i + last_sio].vendor, parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi); irq = PARPORT_IRQ_NONE; } else { - printk (KERN_DEBUG + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n", parport_pc_pci_tbl[i + last_sio].vendor, parport_pc_pci_tbl[i + last_sio].device, @@ -3058,7 +3130,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev, data->num = count; if (cards[i].postinit_hook) - cards[i].postinit_hook (dev, count == 0); + cards[i].postinit_hook(dev, count == 0); if (count) { pci_set_drvdata(dev, data); @@ -3092,7 +3164,7 @@ static struct pci_driver parport_pc_pci_driver = { .remove = __devexit_p(parport_pc_pci_remove), }; -static int __init parport_pc_init_superio (int autoirq, int autodma) +static int __init parport_pc_init_superio(int autoirq, int autodma) { const struct pci_device_id *id; struct pci_dev *pdev = NULL; @@ -3103,8 +3175,9 @@ static int __init parport_pc_init_superio (int autoirq, int autodma) if (id == NULL || id->driver_data >= last_sio) continue; - if (parport_pc_superio_info[id->driver_data].probe - (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) { + if (parport_pc_superio_info[id->driver_data].probe( + pdev, autoirq, autodma, + parport_pc_superio_info[id->driver_data].via)) { ret++; } } @@ -3113,7 +3186,10 @@ static int __init parport_pc_init_superio (int autoirq, int autodma) } #else static struct pci_driver parport_pc_pci_driver; -static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;} +static int __init parport_pc_init_superio(int autoirq, int autodma) +{ + return 0; +} #endif /* CONFIG_PCI */ #ifdef CONFIG_PNP @@ -3126,44 +3202,45 @@ static const struct pnp_device_id parport_pc_pnp_tbl[] = { { } }; -MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl); +MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl); -static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id) +static int parport_pc_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *id) { struct parport *pdata; unsigned long io_lo, io_hi; int dma, irq; - if (pnp_port_valid(dev,0) && - !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) { - io_lo = pnp_port_start(dev,0); + if (pnp_port_valid(dev, 0) && + !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { + io_lo = pnp_port_start(dev, 0); } else return -EINVAL; - if (pnp_port_valid(dev,1) && - !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) { - io_hi = pnp_port_start(dev,1); + if (pnp_port_valid(dev, 1) && + !(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) { + io_hi = pnp_port_start(dev, 1); } else io_hi = 0; - if (pnp_irq_valid(dev,0) && - !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) { - irq = pnp_irq(dev,0); + if (pnp_irq_valid(dev, 0) && + !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) { + irq = pnp_irq(dev, 0); } else irq = PARPORT_IRQ_NONE; - if (pnp_dma_valid(dev,0) && - !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) { - dma = pnp_dma(dev,0); + if (pnp_dma_valid(dev, 0) && + !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) { + dma = pnp_dma(dev, 0); } else dma = PARPORT_DMA_NONE; dev_info(&dev->dev, "reported by %s\n", dev->protocol->name); - if (!(pdata = parport_pc_probe_port(io_lo, io_hi, - irq, dma, &dev->dev, 0))) + pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0); + if (pdata == NULL) return -ENODEV; - pnp_set_drvdata(dev,pdata); + pnp_set_drvdata(dev, pdata); return 0; } @@ -3205,7 +3282,7 @@ static struct platform_driver parport_pc_platform_driver = { /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */ static int __devinit __attribute__((unused)) -parport_pc_find_isa_ports (int autoirq, int autodma) +parport_pc_find_isa_ports(int autoirq, int autodma) { int count = 0; @@ -3229,7 +3306,7 @@ parport_pc_find_isa_ports (int autoirq, int autodma) * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO */ -static void __init parport_pc_find_ports (int autoirq, int autodma) +static void __init parport_pc_find_ports(int autoirq, int autodma) { int count = 0, err; @@ -3263,11 +3340,18 @@ static void __init parport_pc_find_ports (int autoirq, int autodma) * syntax and keep in mind that code below is a cleaned up version. */ -static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 }; -static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = - { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO }; -static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE }; -static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY }; +static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { + [0 ... PARPORT_PC_MAX_PORTS] = 0 +}; +static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = { + [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO +}; +static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { + [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE +}; +static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { + [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY +}; static int __init parport_parse_param(const char *s, int *val, int automatic, int none, int nofifo) @@ -3308,18 +3392,19 @@ static int __init parport_parse_dma(const char *dmastr, int *val) #ifdef CONFIG_PCI static int __init parport_init_mode_setup(char *str) { - printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); - - if (!strcmp (str, "spp")) - parport_init_mode=1; - if (!strcmp (str, "ps2")) - parport_init_mode=2; - if (!strcmp (str, "epp")) - parport_init_mode=3; - if (!strcmp (str, "ecp")) - parport_init_mode=4; - if (!strcmp (str, "ecpepp")) - parport_init_mode=5; + printk(KERN_DEBUG + "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); + + if (!strcmp(str, "spp")) + parport_init_mode = 1; + if (!strcmp(str, "ps2")) + parport_init_mode = 2; + if (!strcmp(str, "epp")) + parport_init_mode = 3; + if (!strcmp(str, "ecp")) + parport_init_mode = 4; + if (!strcmp(str, "ecpepp")) + parport_init_mode = 5; return 1; } #endif @@ -3343,7 +3428,8 @@ module_param(verbose_probing, int, 0644); #endif #ifdef CONFIG_PCI static char *init_mode; -MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)"); +MODULE_PARM_DESC(init_mode, + "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)"); module_param(init_mode, charp, 0); #endif @@ -3374,7 +3460,7 @@ static int __init parse_parport_params(void) irqval[0] = val; break; default: - printk (KERN_WARNING + printk(KERN_WARNING "parport_pc: irq specified " "without base address. Use 'io=' " "to specify one\n"); @@ -3387,7 +3473,7 @@ static int __init parse_parport_params(void) dmaval[0] = val; break; default: - printk (KERN_WARNING + printk(KERN_WARNING "parport_pc: dma specified " "without base address. Use 'io=' " "to specify one\n"); @@ -3398,7 +3484,7 @@ static int __init parse_parport_params(void) #else -static int parport_setup_ptr __initdata = 0; +static int parport_setup_ptr __initdata; /* * Acceptable parameters: @@ -3409,7 +3495,7 @@ static int parport_setup_ptr __initdata = 0; * * IRQ/DMA may be numeric or 'auto' or 'none' */ -static int __init parport_setup (char *str) +static int __init parport_setup(char *str) { char *endptr; char *sep; @@ -3421,15 +3507,15 @@ static int __init parport_setup (char *str) return 1; } - if (!strncmp (str, "auto", 4)) { + if (!strncmp(str, "auto", 4)) { irqval[0] = PARPORT_IRQ_AUTO; dmaval[0] = PARPORT_DMA_AUTO; return 1; } - val = simple_strtoul (str, &endptr, 0); + val = simple_strtoul(str, &endptr, 0); if (endptr == str) { - printk (KERN_WARNING "parport=%s not understood\n", str); + printk(KERN_WARNING "parport=%s not understood\n", str); return 1; } @@ -3463,7 +3549,7 @@ static int __init parse_parport_params(void) return io[0] == PARPORT_DISABLE; } -__setup ("parport=", parport_setup); +__setup("parport=", parport_setup); /* * Acceptable parameters: @@ -3471,7 +3557,7 @@ __setup ("parport=", parport_setup); * parport_init_mode=[spp|ps2|epp|ecp|ecpepp] */ #ifdef CONFIG_PCI -__setup("parport_init_mode=",parport_init_mode_setup); +__setup("parport_init_mode=", parport_init_mode_setup); #endif #endif @@ -3495,13 +3581,13 @@ static int __init parport_pc_init(void) for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) { if (!io[i]) break; - if ((io_hi[i]) == PARPORT_IOHI_AUTO) - io_hi[i] = 0x400 + io[i]; + if (io_hi[i] == PARPORT_IOHI_AUTO) + io_hi[i] = 0x400 + io[i]; parport_pc_probe_port(io[i], io_hi[i], - irqval[i], dmaval[i], NULL, 0); + irqval[i], dmaval[i], NULL, 0); } } else - parport_pc_find_ports (irqval[0], dmaval[0]); + parport_pc_find_ports(irqval[0], dmaval[0]); return 0; } @@ -3509,9 +3595,9 @@ static int __init parport_pc_init(void) static void __exit parport_pc_exit(void) { if (pci_registered_parport) - pci_unregister_driver (&parport_pc_pci_driver); + pci_unregister_driver(&parport_pc_pci_driver); if (pnp_registered_parport) - pnp_unregister_driver (&parport_pc_pnp_driver); + pnp_unregister_driver(&parport_pc_pnp_driver); platform_driver_unregister(&parport_pc_platform_driver); while (!list_empty(&ports_list)) { -- cgit v1.2.3-18-g5258 From 181bf1e815a2ad2a9a8b30ef6e92583d1530b255 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:08:10 +0100 Subject: parport_pc: clean up the modified while loops using for And tidy up a few bits coding style detectors missed Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 98 ++++++++++++++++++++++++++------------------ 1 file changed, 57 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index edf83e94585..151bf5bc8af 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -626,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma(struct parport *port, unsigned long start = (unsigned long) buf; unsigned long end = (unsigned long) buf + length - 1; -dump_parport_state("enter fifo_write_block_dma", port); + dump_parport_state("enter fifo_write_block_dma", port); if (end < MAX_DMA_ADDRESS) { /* If it would cross a 64k boundary, cap it at the end. */ if ((start ^ end) & ~0xffffUL) @@ -737,7 +737,7 @@ false_alarm: if (dma_handle) dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE); -dump_parport_state("leave fifo_write_block_dma", port); + dump_parport_state("leave fifo_write_block_dma", port); return length - left; } #endif @@ -955,8 +955,8 @@ static size_t parport_pc_ecp_read_block_pio(struct parport *port, char *bufp = buf; port = port->physport; -DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); -dump_parport_state("enter fcn", port); + DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); + dump_parport_state("enter fcn", port); /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ @@ -1112,14 +1112,15 @@ false_alarm: if (ecrval & 0x02) { /* FIFO is full. */ -dump_parport_state("FIFO full", port); + dump_parport_state("FIFO full", port); insb(fifo, bufp, fifo_depth); bufp += fifo_depth; left -= fifo_depth; continue; } -DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); + DPRINTK(KERN_DEBUG + "*** ecp_read_block_pio: reading one byte from the FIFO\n"); /* FIFO not filled. We will cycle this loop for a while * and either the peripheral will fill it faster, @@ -1135,7 +1136,7 @@ DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); } port->ieee1284.phase = IEEE1284_PH_REV_IDLE; -dump_parport_state("rev idle2", port); + dump_parport_state("rev idle2", port); out_no_data: @@ -1163,7 +1164,7 @@ out_no_data: port->name, lost); } -dump_parport_state("fwd idle", port); + dump_parport_state("fwd idle", port); return length - left; } #endif /* 0 */ @@ -1216,10 +1217,23 @@ static const struct parport_operations parport_pc_ops = { }; #ifdef CONFIG_PARPORT_PC_SUPERIO + +static struct superio_struct *find_free_superio(void) +{ + int i; + for (i = 0; i < NR_SUPERIOS; i++) + if (superios[i].io == 0) + return &superios[i]; + return NULL; +} + + /* Super-IO chipset detection, Winbond, SMSC */ static void __devinit show_parconfig_smsc37c669(int io, int key) { - int cr1, cr4, cra, cr23, cr26, cr27, i = 0; + int cr1, cr4, cra, cr23, cr26, cr27; + struct superio_struct *s; + static const char *const modes[] = { "SPP and Bidirectional (PS/2)", "EPP and SPP", @@ -1272,30 +1286,29 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) are related, however DMA can be 1 or 3, assume DMA_A=DMA1, DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */ if (cr23 * 4 >= 0x100) { /* if active */ - while ((i < NR_SUPERIOS) && (superios[i].io != 0)) - i++; - if (i == NR_SUPERIOS) { + s = find_free_superio(); + if (s == NULL) printk(KERN_INFO "Super-IO: too many chips!\n"); - } else { + else { int d; switch (cr23 * 4) { case 0x3bc: - superios[i].io = 0x3bc; - superios[i].irq = 7; + s->io = 0x3bc; + s->irq = 7; break; case 0x378: - superios[i].io = 0x378; - superios[i].irq = 7; + s->io = 0x378; + s->irq = 7; break; case 0x278: - superios[i].io = 0x278; - superios[i].irq = 5; + s->io = 0x278; + s->irq = 5; } d = (cr26 & 0x0f); if (d == 1 || d == 3) - superios[i].dma = d; + s->dma = d; else - superios[i].dma = PARPORT_DMA_NONE; + s->dma = PARPORT_DMA_NONE; } } } @@ -1303,7 +1316,8 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) static void __devinit show_parconfig_winbond(int io, int key) { - int cr30, cr60, cr61, cr70, cr74, crf0, i = 0; + int cr30, cr60, cr61, cr70, cr74, crf0; + struct superio_struct *s; static const char *const modes[] = { "Standard (SPP) and Bidirectional(PS/2)", /* 0 */ "EPP-1.9 and SPP", @@ -1356,14 +1370,13 @@ static void __devinit show_parconfig_winbond(int io, int key) } if (cr30 & 0x01) { /* the settings can be interrogated later ... */ - while ((i < NR_SUPERIOS) && (superios[i].io != 0)) - i++; - if (i == NR_SUPERIOS) { + s = find_free_superio(); + if (s == NULL) printk(KERN_INFO "Super-IO: too many chips!\n"); - } else { - superios[i].io = (cr60<<8)|cr61; - superios[i].irq = cr70&0x0f; - superios[i].dma = (((cr74 & 0x07) > 3) ? + else { + s->io = (cr60 << 8) | cr61; + s->irq = cr70 & 0x0f; + s->dma = (((cr74 & 0x07) > 3) ? PARPORT_DMA_NONE : (cr74 & 0x07)); } } @@ -1618,25 +1631,28 @@ static void __devinit detect_and_report_it87(void) } #endif /* CONFIG_PARPORT_PC_SUPERIO */ -static int get_superio_dma(struct parport *p) +static struct superio_struct *find_superio(struct parport *p) { - int i = 0; + int i; + for (i = 0; i < NR_SUPERIOS; i++) + if (superios[i].io != p->base) + return &superios[i]; + return NULL; +} - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].dma; +static int get_superio_dma(struct parport *p) +{ + struct superio_struct *s = find_superio(p); + if (s) + return s->dma; return PARPORT_DMA_NONE; } static int get_superio_irq(struct parport *p) { - int i = 0; - - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].irq; + struct superio_struct *s = find_superio(p); + if (s) + return s->irq; return PARPORT_IRQ_NONE; } -- cgit v1.2.3-18-g5258 From 257a6e8cc7f9274f0af090494a3f1ee06548b5bd Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 11 Jun 2009 13:20:09 +0100 Subject: icom: fix compile errors when defining ICOM_TRACE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As it is, defining ICOM_TRACE produces some compile errors, as "parameter name omitted" and "redefinition of ‘trace’" This patch removes the wrong trace definition. Signed-off-by: Breno Leitao Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index fd5fd23804b..9f2891c2c4a 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head); static spinlock_t icom_lock; #ifdef ICOM_TRACE -static inline void trace(struct icom_port *, char *, unsigned long) {}; +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} #else static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; #endif @@ -1647,15 +1652,6 @@ static void __exit icom_exit(void) module_init(icom_init); module_exit(icom_exit); -#ifdef ICOM_TRACE -static inline void trace(struct icom_port *icom_port, char *trace_pt, - unsigned long trace_data) -{ - dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", - icom_port->port, trace_pt, trace_data); -} -#endif - MODULE_AUTHOR("Michael Anderson "); MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); MODULE_SUPPORTED_DEVICE -- cgit v1.2.3-18-g5258 From 08e0992f60ad44025a8a8b8a821838ca4a562686 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Jun 2009 13:21:24 +0100 Subject: serial: add support for the TI AR7 internal UART This patch adds support for the TI AR7 internal UART. Signed-off-by: Florian Fainelli Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a0127e93ade..fb867a9f55e 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -287,6 +287,13 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO, }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; #if defined (CONFIG_SERIAL_8250_AU1X00) -- cgit v1.2.3-18-g5258 From b5c6794fe4256fd63664aa185c468647c28bfd4a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 13:23:02 +0100 Subject: Blackfin SPORT UART: fix typo in sport_set_termios prototype Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 529c0ff7952..fd5cb9576a0 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -419,7 +419,7 @@ static void sport_shutdown(struct uart_port *port) } static void sport_set_termios(struct uart_port *port, - struct termios *termios, struct termios *old) + struct ktermios *termios, struct ktermios *old) { pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); uart_update_timeout(port, CS8 ,port->uartclk); -- cgit v1.2.3-18-g5258 From a19e8b205915b2925aca75b2d2bf0c3104c8be14 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 11 Jun 2009 13:23:42 +0100 Subject: Blackfin SPORT UART: fix data misses while using transmit frame sync SPORT transmit frame sync (TFS) isn't used as an electrical signal during normal SPORT UART emulation. However, it is useful in EIA RS-485 emulation as RS-485 Transceiver Driver Enable DE strobe. This patch configures: TFS to be active high in order to drive an DE strobe of an eventually connected RS-485 Transceiver. Late frame sync mode (LATFS) gating the entire TX shift cycle. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index fd5cb9576a0..6687ccd422b 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -149,7 +149,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) int tclkdiv, tfsdiv, rclkdiv; /* Set TCR1 and TCR2 */ - SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK)); + SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); SPORT_PUT_TCR2(up, 10); pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); -- cgit v1.2.3-18-g5258 From 4328e3e5ef1ae3427a4f6863aa65916a68ec2dd9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 13:37:11 +0100 Subject: Blackfin SPORT UART: rewrite inline assembly Hopefuly the new version is easier to read, but in the process it declares proper clobber lists and better constraints so that GCC can do a better job at allocating free registers. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 54 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 6687ccd422b..34b4ae0fe76 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { pr_debug("%s value:%x\n", __func__, value); /* Place a Start and Stop bit */ - __asm__ volatile ( - "R2 = b#01111111100;\n\t" - "R3 = b#10000000001;\n\t" - "%0 <<= 2;\n\t" - "%0 = %0 & R2;\n\t" - "%0 = %0 | R3;\n\t" - :"=r"(value) - :"0"(value) - :"R2", "R3"); + __asm__ __volatile__ ( + "R2 = b#01111111100;" + "R3 = b#10000000001;" + "%0 <<= 2;" + "%0 = %0 & R2;" + "%0 = %0 | R3;" + : "=d"(value) + : "d"(value) + : "ASTAT", "R2", "R3" + ); pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); @@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) static inline unsigned int rx_one_byte(struct sport_uart_port *up) { unsigned int value, extract; + u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; value = SPORT_GET_RX32(up); pr_debug("%s value:%x\n", __func__, value); /* Extract 8 bits data */ - __asm__ volatile ( - "R5 = 0;\n\t" - "P0 = 8;\n\t" - "R1 = 0x1801(Z);\n\t" - "R3 = 0x0300(Z);\n\t" - "R4 = 0;\n\t" - "LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t" - "R2 = extract(%1, R1.L)(Z);\n\t" - "R2 <<= R4;\n\t" - "R5 = R5 | R2;\n\t" - "R1 = R1 - R3;\nloop_e:\t" - "R4 += 1;\n\t" - "%0 = R5;\n\t" - :"=r"(extract) - :"r"(value) - :"P0", "R1", "R2","R3","R4", "R5"); + __asm__ __volatile__ ( + "%[extr] = 0;" + "%[mask1] = 0x1801(Z);" + "%[mask2] = 0x0300(Z);" + "%[shift] = 0;" + "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" + ".Lloop_s:" + "%[tmp] = extract(%[val], %[mask1].L)(Z);" + "%[tmp] <<= %[shift];" + "%[extr] = %[extr] | %[tmp];" + "%[mask1] = %[mask1] - %[mask2];" + ".Lloop_e:" + "%[shift] += 1;" + : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp), + [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2) + : "d"(value), [lc]"a"(8) + : "ASTAT", "LB0", "LC0", "LT0" + ); pr_debug(" extract:%x\n", extract); return extract; -- cgit v1.2.3-18-g5258 From 8516c568f25666a012ec4c859e640a76fc9b6ec0 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:38:16 +0100 Subject: Blackfin Serial Driver: fix error while transferring large files Ignore receiving data if new position is in the same line of current buffer tail and is small. This should decrease overruns. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d86123e0339..65a4c07f619 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -477,6 +477,15 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) spin_lock_irqsave(&uart->port.lock, flags); + /* 2D DMA RX buffer ring is used. Because curr_y_count and + * curr_x_count can't be read as an atomic operation, + * curr_y_count should be read before curr_x_count. When + * curr_x_count is read, curr_y_count may already indicate + * next buffer line. But, the position calculated here is + * still indicate the old line. The wrong position data may + * be smaller than current buffer tail, which cause garbages + * are received if it is not prohibit. + */ uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; @@ -487,7 +496,11 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - if (pos != uart->rx_dma_buf.tail) { + /* Ignore receiving data if new position is in the same line of + * current buffer tail and small. + */ + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { uart->rx_dma_buf.head = pos; bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.tail = uart->rx_dma_buf.head; @@ -532,11 +545,25 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; + int pos; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); - bfin_serial_dma_rx_chars(uart); + + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + uart->rx_dma_nrows = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + spin_unlock(&uart->port.lock); return IRQ_HANDLED; -- cgit v1.2.3-18-g5258 From 7de7c55bf54dede2bd2262349fc7b558bcc8e413 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Thu, 11 Jun 2009 13:38:57 +0100 Subject: Blackfin Serial Driver: fix baudrate for early_printk Since we already setup the early console UART in arch/blackfin/kernel/early_printk.c, and common functions which are enabled from the .setup will override the proper settings later, don't fill in these structures. Otherwise we get mangled baudrate settings when using early_printk. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 65a4c07f619..dfae22d47bf 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1272,12 +1272,17 @@ static __init void early_serial_write(struct console *con, const char *s, } } +/* + * This should have a .setup or .early_setup in it, but then things get called + * without the command line options, and the baud rate gets messed up - so + * don't let the common infrastructure play with things. (see calls to setup + * & earlysetup in ./kernel/printk.c:register_console() + */ static struct __initdata console bfin_early_serial_console = { .name = "early_BFuart", .write = early_serial_write, .device = uart_console_device, .flags = CON_PRINTBUFFER, - .setup = bfin_serial_console_setup, .index = -1, .data = &bfin_serial_reg, }; -- cgit v1.2.3-18-g5258 From f9d36da9cdc2504cd9bb6034cfaba0673ce2d6df Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Thu, 11 Jun 2009 13:42:17 +0100 Subject: Blackfin Serial Driver: fix missing new lines when under load Add a SSYNC() into bfin_serial_dma_tx_chars() to ensure DMA registers are written with new data otherwise we might miss a byte or two when the system is under load. PIO mode is OK though. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index dfae22d47bf..676efdad371 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -415,6 +415,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); + SSYNC(); enable_dma(uart->tx_dma_channel); UART_SET_IER(uart, ETBEI); -- cgit v1.2.3-18-g5258 From 35ff69357949cfff5c3d8e3038b77146872e3bd3 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:42:57 +0100 Subject: Blackfin Serial Driver: handle irregular DMA register status in auto start mode This bug is caused by irregular behavior of DMA register CURR_X_COUNT and CURR_Y_COUNT when an auto restart uart rx DMA run to last byte in DMA buffer, trigger the interrupt and stay at this possiton. The status of current x and y is 0:7 instead of 512:8 or 0:8. The driver doesn't take care of this case when calculating the position. URL: http://blackfin.uclinux.org/gf/tracker/5063 Reported-by: Tomasz Motylewski Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 676efdad371..854e96dfb07 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -490,7 +490,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) uart->rx_dma_nrows = 0; x_pos = DMA_RX_XCOUNT - x_pos; if (x_pos == DMA_RX_XCOUNT) @@ -546,15 +546,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; - int pos; + int x_pos, pos; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) uart->rx_dma_nrows = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; -- cgit v1.2.3-18-g5258 From 0efa4f2c944fabffc81918cc86d4d17dba39a021 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:45:07 +0100 Subject: Blackfin Serial Driver: annotate anomalies 05000215 and 05000099 Add some comments for how these anomalies are addressed: 05000215 - UART TX Interrupt Masked Erroneously We always clear ETBEI within last UART TX interrupt to end a string. It is always set when starting a new tx transfer. 05000099 - UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time This anomaly affects driver only in POLL code where multi bits of UART_LSR are checked. It doesn't affect current bfin_5xx.c driver. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 854e96dfb07..ab583ef3a30 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); #endif + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ UART_CLEAR_IER(uart, ETBEI); return; } @@ -528,6 +533,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { disable_dma(uart->tx_dma_channel); clear_dma_irqstat(uart->tx_dma_channel); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ UART_CLEAR_IER(uart, ETBEI); xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; @@ -969,6 +979,10 @@ static void bfin_serial_reset_irda(struct uart_port *port) } #ifdef CONFIG_CONSOLE_POLL +/* Anomaly notes: + * 05000099 - Because we only use THRE in poll_put and DR in poll_get, + * losing other bits of UART_LSR is not a problem here. + */ static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -- cgit v1.2.3-18-g5258 From 84507794a9d5d4decd6bc9c111480076dba0d301 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:50:20 +0100 Subject: Blackfin Serial Driver: handle anomaly 05000231 05000231 - UART STB Bit Incorrectly Affects Receiver Setting For processors affected by this, we cannot safely allow CSTOPB to be set as the UART will then be unable to properly clock in bytes. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ab583ef3a30..64603f5bb70 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -828,8 +828,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, __func__); } - if (termios->c_cflag & CSTOPB) - lcr |= STB; + /* Anomaly notes: + * 05000231 - STOP bit is always set to 1 whatever the user is set. + */ + if (termios->c_cflag & CSTOPB) { + if (ANOMALY_05000231) + printk(KERN_WARNING "STOP bits other than 1 is not " + "supported in case of anomaly 05000231.\n"); + else + lcr |= STB; + } if (termios->c_cflag & PARENB) lcr |= PEN; if (!(termios->c_cflag & PARODD)) -- cgit v1.2.3-18-g5258 From 2860b7911137eabb01c159abefb506e538ff3cb7 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:51:33 +0100 Subject: Blackfin Serial Driver: disable dma rx interrupt only rather than all irqs The UART RX handling code isn't exactly speeding, so don't go disabling all interrupts when processing the buffer. Just disable the relevant DMA interrupt. This greatly improves latency of the system when utilizing the UART. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 64603f5bb70..e2f6b1bfac9 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -479,9 +479,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - unsigned long flags; - spin_lock_irqsave(&uart->port.lock, flags); + dma_disable_irq(uart->rx_dma_channel); + spin_lock_bh(&uart->port.lock); /* 2D DMA RX buffer ring is used. Because curr_y_count and * curr_x_count can't be read as an atomic operation, @@ -512,7 +512,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_irqrestore(&uart->port.lock, flags); + spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } -- cgit v1.2.3-18-g5258 From b7c7cbc898e8a97829f33ad3bcd1b5e91690d8f4 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:52:31 +0100 Subject: USB: CP210X Add device IDs Signed-off-by: Craig Shelley Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index d9f586dc6ec..ac4944a8152 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -57,13 +57,16 @@ static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ + { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ + { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ @@ -84,10 +87,12 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ @@ -98,7 +103,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ + { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ + { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ -- cgit v1.2.3-18-g5258 From 93ef1f1fbce37f14666e4856ff933d4a1b735d02 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:53:30 +0100 Subject: USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 98 ++++++++++++++++++++++++++------------------- 1 file changed, 56 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ac4944a8152..b50f27fa11d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -27,7 +27,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.08" +#define DRIVER_VERSION "v0.09" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -144,23 +144,40 @@ static struct usb_serial_driver cp2101_device = { #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/* Config SET requests. To GET, add 1 to the request number */ -#define CP2101_UART 0x00 /* Enable / Disable */ -#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ -#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ -#define CP2101_BREAK 0x05 /* On / Off */ -#define CP2101_CONTROL 0x07 /* Flow control line states */ -#define CP2101_MODEMCTL 0x13 /* Modem controls */ -#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ - -/* CP2101_UART */ +/* Config request codes */ +#define CP210X_IFC_ENABLE 0x00 +#define CP210X_SET_BAUDDIV 0x01 +#define CP210X_GET_BAUDDIV 0x02 +#define CP210X_SET_LINE_CTL 0x03 +#define CP210X_GET_LINE_CTL 0x04 +#define CP210X_SET_BREAK 0x05 +#define CP210X_IMM_CHAR 0x06 +#define CP210X_SET_MHS 0x07 +#define CP210X_GET_MDMSTS 0x08 +#define CP210X_SET_XON 0x09 +#define CP210X_SET_XOFF 0x0A +#define CP210X_SET_EVENTMASK 0x0B +#define CP210X_GET_EVENTMASK 0x0C +#define CP210X_SET_CHAR 0x0D +#define CP210X_GET_CHARS 0x0E +#define CP210X_GET_PROPS 0x0F +#define CP210X_GET_COMM_STATUS 0x10 +#define CP210X_RESET 0x11 +#define CP210X_PURGE 0x12 +#define CP210X_SET_FLOW 0x13 +#define CP210X_GET_FLOW 0x14 +#define CP210X_EMBED_EVENTS 0x15 +#define CP210X_GET_EVENTSTATE 0x16 +#define CP210X_SET_CHARS 0x19 + +/* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/* CP2101_BAUDRATE */ +/* CP210X_(SET|GET)_BAUDDIV */ #define BAUD_RATE_GEN_FREQ 0x384000 -/* CP2101_BITS */ +/* CP210X_(SET|GET)_LINE_CTL */ #define BITS_DATA_MASK 0X0f00 #define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 @@ -180,11 +197,11 @@ static struct usb_serial_driver cp2101_device = { #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 -/* CP2101_BREAK */ +/* CP210X_SET_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 -/* CP2101_CONTROL */ +/* CP210X_(SET_MHS|GET_MDMSTS) */ #define CONTROL_DTR 0x0001 #define CONTROL_RTS 0x0002 #define CONTROL_CTS 0x0010 @@ -217,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, return -ENOMEM; } - /* For get requests, the request number must be incremented */ - request++; - /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, @@ -357,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -415,7 +429,7 @@ static void cp2101_close(struct usb_serial_port *port) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } @@ -456,7 +470,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + cp2101_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); @@ -466,7 +480,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag = *cflagp; - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -491,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -521,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -547,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -557,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -594,7 +608,7 @@ static void cp2101_set_termios(struct tty_struct *tty, if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -605,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -635,13 +649,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -652,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -667,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -693,7 +707,7 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } @@ -731,7 +745,7 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + return cp2101_set_config(port, CP210X_SET_MHS, &control, 2); } static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) @@ -742,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_CONTROL, &control, 1); + cp2101_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -768,7 +782,7 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, &state, 2); + cp2101_set_config(port, CP210X_SET_BREAK, &state, 2); } static int cp2101_startup(struct usb_serial *serial) -- cgit v1.2.3-18-g5258 From 4cc27bd6d7d6750dba33b4ccb4585c00b8fca7d2 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:54:40 +0100 Subject: USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley (Fixed some collisions merging) Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 194 ++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b50f27fa11d..16a154d3b2f 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1,5 +1,5 @@ /* - * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver + * Silicon Laboratories CP210x USB to RS232 serial adaptor driver * * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) * @@ -28,29 +28,29 @@ * Version Information */ #define DRIVER_VERSION "v0.09" -#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" +#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" /* * Function Prototypes */ -static int cp2101_open(struct tty_struct *, struct usb_serial_port *, +static int cp210x_open(struct tty_struct *, struct usb_serial_port *, struct file *); -static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct usb_serial_port *); -static void cp2101_get_termios(struct tty_struct *, +static void cp210x_cleanup(struct usb_serial_port *); +static void cp210x_close(struct usb_serial_port *); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); -static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, +static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); -static int cp2101_tiocmget(struct tty_struct *, struct file *); -static int cp2101_tiocmset(struct tty_struct *, struct file *, +static int cp210x_tiocmget(struct tty_struct *, struct file *); +static int cp210x_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, unsigned int, unsigned int); -static void cp2101_break_ctl(struct tty_struct *, int); -static int cp2101_startup(struct usb_serial *); -static void cp2101_shutdown(struct usb_serial *); +static void cp210x_break_ctl(struct tty_struct *, int); +static int cp210x_startup(struct usb_serial *); +static void cp210x_shutdown(struct usb_serial *); static int debug; @@ -114,30 +114,30 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver cp2101_driver = { - .name = "cp2101", +static struct usb_driver cp210x_driver = { + .name = "cp210x", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, .no_dynamic_id = 1, }; -static struct usb_serial_driver cp2101_device = { +static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, - .name = "cp2101", + .name = "cp210x", }, - .usb_driver = &cp2101_driver, + .usb_driver = &cp210x_driver, .id_table = id_table, .num_ports = 1, - .open = cp2101_open, - .close = cp2101_close, - .break_ctl = cp2101_break_ctl, - .set_termios = cp2101_set_termios, - .tiocmget = cp2101_tiocmget, - .tiocmset = cp2101_tiocmset, - .attach = cp2101_startup, - .shutdown = cp2101_shutdown, + .open = cp210x_open, + .close = cp210x_close, + .break_ctl = cp210x_break_ctl, + .set_termios = cp210x_set_termios, + .tiocmget = cp210x_tiocmget, + .tiocmset = cp210x_tiocmset, + .attach = cp210x_startup, + .shutdown = cp210x_shutdown, }; /* Config request types */ @@ -212,13 +212,13 @@ static struct usb_serial_driver cp2101_device = { #define CONTROL_WRITE_RTS 0x0200 /* - * cp2101_get_config - * Reads from the CP2101 configuration registers + * cp210x_get_config + * Reads from the CP210x configuration registers * 'size' is specified in bytes. * 'data' is a pointer to a pre-allocated array of integers large * enough to hold 'size' bytes (with 4 bytes to each integer) */ -static int cp2101_get_config(struct usb_serial_port *port, u8 request, +static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -256,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config - * Writes to the CP2101 configuration registers + * cp210x_set_config + * Writes to the CP210x configuration registers * Values less than 16 bits wide are sent directly * 'size' is specified in bytes. */ -static int cp2101_set_config(struct usb_serial_port *port, u8 request, +static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -312,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config_single - * Convenience function for calling cp2101_set_config on single data values + * cp210x_set_config_single + * Convenience function for calling cp210x_set_config on single data values * without requiring an integer pointer */ -static inline int cp2101_set_config_single(struct usb_serial_port *port, +static inline int cp210x_set_config_single(struct usb_serial_port *port, u8 request, unsigned int data) { - return cp2101_set_config(port, request, &data, 2); + return cp210x_set_config(port, request, &data, 2); } /* - * cp2101_quantise_baudrate + * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ -static unsigned int cp2101_quantise_baudrate(unsigned int baud) { +static unsigned int cp210x_quantise_baudrate(unsigned int baud) { if (baud <= 56) baud = 0; else if (baud <= 300) baud = 300; else if (baud <= 600) baud = 600; @@ -363,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) { return baud; } -static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -371,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { + if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -393,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, } /* Configure the termios structure */ - cp2101_get_termios(tty, port); + cp210x_get_termios(tty, port); /* Set the DTR and RTS pins low */ - cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data + cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data : port, NULL, TIOCM_DTR | TIOCM_RTS, 0); return 0; } -static void cp2101_cleanup(struct usb_serial_port *port) +static void cp210x_cleanup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -418,7 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port) } } -static void cp2101_close(struct usb_serial_port *port) +static void cp210x_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); @@ -429,23 +429,23 @@ static void cp2101_close(struct usb_serial_port *port) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } /* - * cp2101_get_termios + * cp210x_get_termios * Reads the baud rate, data bits, parity, stop bits and flow control mode * from the device, corrects any unsupported values, and configures the * termios structure to reflect the state of the device */ -static void cp2101_get_termios(struct tty_struct *tty, +static void cp210x_get_termios(struct tty_struct *tty, struct usb_serial_port *port) { unsigned int baud; if (tty) { - cp2101_get_termios_port(tty->driver_data, + cp210x_get_termios_port(tty->driver_data, &tty->termios->c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); } @@ -453,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty, else { unsigned int cflag; cflag = 0; - cp2101_get_termios_port(port, &cflag, &baud); + cp210x_get_termios_port(port, &cflag, &baud); } } /* - * cp2101_get_termios_port - * This is the heart of cp2101_get_termios which always uses a &usb_serial_port. + * cp210x_get_termios_port + * This is the heart of cp210x_get_termios which always uses a &usb_serial_port. */ -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { unsigned int cflag, modem_ctl[4]; @@ -470,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); + cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) - baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; cflag = *cflagp; - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -505,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -535,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -561,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -571,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -587,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } -static void cp2101_set_termios(struct tty_struct *tty, +static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; @@ -602,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty, tty->termios->c_cflag &= ~CMSPAR; cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); + baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); /* If the baud rate is to be updated*/ if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP210X_SET_BAUDDIV, + if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -619,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -643,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - data bits = 9", __func__); break;*/ default: - dbg("cp2101 driver does not " + dbg("cp210x driver does not " "support the number of bits requested," " using 8 bit mode\n"); bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -666,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -681,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -707,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); + cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } -static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, +static int cp210x_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - return cp2101_tiocmset_port(port, file, set, clear); + return cp210x_tiocmset_port(port, file, set, clear); } -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) { unsigned int control = 0; @@ -745,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP210X_SET_MHS, &control, 2); + return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } -static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) +static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; unsigned int control; @@ -756,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP210X_GET_MDMSTS, &control, 1); + cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -770,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static void cp2101_break_ctl (struct tty_struct *tty, int break_state) +static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned int state; @@ -782,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP210X_SET_BREAK, &state, 2); + cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } -static int cp2101_startup(struct usb_serial *serial) +static int cp210x_startup(struct usb_serial *serial) { - /* CP2101 buffers behave strangely unless device is reset */ + /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } -static void cp2101_shutdown(struct usb_serial *serial) +static void cp210x_shutdown(struct usb_serial *serial) { int i; @@ -800,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial) /* Stop reads and writes on all ports */ for (i = 0; i < serial->num_ports; ++i) - cp2101_cleanup(serial->port[i]); + cp210x_cleanup(serial->port[i]); } -static int __init cp2101_init(void) +static int __init cp210x_init(void) { int retval; - retval = usb_serial_register(&cp2101_device); + retval = usb_serial_register(&cp210x_device); if (retval) return retval; /* Failed to register */ - retval = usb_register(&cp2101_driver); + retval = usb_register(&cp210x_driver); if (retval) { /* Failed to register */ - usb_serial_deregister(&cp2101_device); + usb_serial_deregister(&cp210x_device); return retval; } @@ -824,14 +824,14 @@ static int __init cp2101_init(void) return 0; } -static void __exit cp2101_exit(void) +static void __exit cp210x_exit(void) { - usb_deregister(&cp2101_driver); - usb_serial_deregister(&cp2101_device); + usb_deregister(&cp210x_driver); + usb_serial_deregister(&cp210x_device); } -module_init(cp2101_init); -module_exit(cp2101_exit); +module_init(cp210x_init); +module_exit(cp210x_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); -- cgit v1.2.3-18-g5258 From 557aaa7ffab639d0190b935a041b16ae44606342 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:55:34 +0100 Subject: ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox --- drivers/usb/serial/ftdi_sio.c | 94 +++++++++++++++++++++++++++---------------- 1 file changed, 60 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9d87111f9a..21c053c31b9 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -89,6 +89,7 @@ struct ftdi_private { int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ unsigned long tx_bytes; unsigned long tx_outstanding_bytes; @@ -1038,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) return rv; } +static int write_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + char buf[1]; + int rv = 0; + int l = priv->latency; + + if (priv->flags & ASYNC_LOW_LATENCY) + l = 1; + + dbg("%s: setting latency timer = %i", __func__, l); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + l, priv->interface, + buf, 0, WDR_TIMEOUT); + if (rv < 0) + dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); + return rv; +} + +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + unsigned short latency = 0; + int rv = 0; + + + dbg("%s", __func__); + + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + (char *) &latency, 1, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + return -EIO; + } + return latency; +} static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) @@ -1098,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty, priv->custom_divisor = new_serial.custom_divisor; tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != @@ -1193,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; - int rv = 0; - - - dbg("%s", __func__); - - rv = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - FTDI_SIO_GET_LATENCY_TIMER_REQUEST, - FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } - return sprintf(buf, "%i\n", latency); + if (priv->flags & ASYNC_LOW_LATENCY) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "%i\n", priv->latency); } + /* Write a new value of the latency timer, in units of milliseconds. */ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf, @@ -1221,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __func__, v); - - rv = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - FTDI_SIO_SET_LATENCY_TIMER_REQUEST, - FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, - buf, 0, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to write latency timer: %i\n", rv); + priv->latency = v; + rv = write_latency_timer(port); + if (rv < 0) return -EIO; - } - return count; } @@ -1393,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); ftdi_determine_type(port); + read_latency_timer(port); create_sysfs_attrs(port); return 0; } @@ -1515,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty, if (tty) tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); + /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), -- cgit v1.2.3-18-g5258 From 7f8d09eae26a8108406583192996561665b36371 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:56:16 +0100 Subject: tty: fix bluetooth scribbling on low latency flags Bluetooth shouldn't be doing this as most drivers don't support the flag, furthermore it shouldn't be needed with newer buffering. This becomes rather more visible as the locking fixes make the abuse of low_latency visible as spew on the users console/dmesg. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ldisc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 68801512859..4895f0e0532 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -463,7 +463,6 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, clear_bit(HCI_UART_PROTO_SET, &hu->flags); return err; } - tty->low_latency = 1; } else return -EBUSY; break; -- cgit v1.2.3-18-g5258 From 7e9cd3a617414cfe74342659ceeb4e92975c1efa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:57:01 +0100 Subject: ftdi_sio: don't override modem bits The new open/close logic handles DTR and friends, so don't do it in our own open routine as well. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/ftdi_sio.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 21c053c31b9..683304d6061 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1556,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty, if (tty) ftdi_set_termios(tty, port, tty->termios); - /* FIXME: Flow control might be enabled, so it should be checked - - we have no control of defaults! */ - /* Turn on RTS and DTR since we are not flow controlling by default */ - set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - /* Not throttled */ spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); -- cgit v1.2.3-18-g5258 From 0b91421857414f525690ee452c0b0acb6ab1dba3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 14:01:45 +0100 Subject: tty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interface The Blackfin JTAG interface has a 4 byte generic data field (EMUDAT). With a little creative thinking, we can turn this into a TTY device. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 13 ++ drivers/char/Makefile | 1 + drivers/char/bfin_jtag_comm.c | 365 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 379 insertions(+) create mode 100644 drivers/char/bfin_jtag_comm.c (limited to 'drivers') diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 735bbe2be51..02ecfd5fa61 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -97,6 +97,19 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 9caf5b5ad1c..189efcff08c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c new file mode 100644 index 00000000000..44c113d5604 --- /dev/null +++ b/drivers/char/bfin_jtag_comm.c @@ -0,0 +1,365 @@ +/* + * TTY over Blackfin JTAG Communication + * + * Copyright 2008-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +#define DRV_NAME "bfin-jtag-comm" +#define DEV_NAME "ttyBFJC" + +#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args) + +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) +{ + return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); +} + +#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ +#define CIRC_MASK (CIRC_SIZE - 1) +#define circ_empty(circ) ((circ)->head == (circ)->tail) +#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) + +static struct tty_driver *bfin_jc_driver; +static struct task_struct *bfin_jc_kthread; +static struct tty_struct * volatile bfin_jc_tty; +static unsigned long bfin_jc_count; +static DEFINE_MUTEX(bfin_jc_tty_mutex); +static volatile struct circ_buf bfin_jc_write_buf; + +static int +bfin_jc_emudat_manager(void *arg) +{ + uint32_t inbound_len = 0, outbound_len = 0; + + while (!kthread_should_stop()) { + /* no one left to give data to, so sleep */ + if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for readers\n"); + __set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + __set_current_state(TASK_RUNNING); + } + + /* no data available, so just chill */ + if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for data (in_len = %i) (circ: %i %i)\n", + inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); + if (inbound_len) + schedule(); + else + schedule_timeout_interruptible(HZ); + continue; + } + + /* if incoming data is ready, eat it */ + if (bfin_read_DBGSTAT() & EMUDIF) { + struct tty_struct *tty; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty != NULL) { + uint32_t emudat = bfin_read_emudat(); + if (inbound_len == 0) { + debug("incoming length: 0x%08x\n", emudat); + inbound_len = emudat; + } else { + size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); + debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); + inbound_len -= num_chars; + tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); + tty_flip_buffer_push(tty); + } + } + mutex_unlock(&bfin_jc_tty_mutex); + } + + /* if outgoing data is ready, post it */ + if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { + if (outbound_len == 0) { + outbound_len = circ_cnt(&bfin_jc_write_buf); + bfin_write_emudat(outbound_len); + debug("outgoing length: 0x%08x\n", outbound_len); + } else { + struct tty_struct *tty; + int tail = bfin_jc_write_buf.tail; + size_t ate = (4 <= outbound_len ? 4 : outbound_len); + uint32_t emudat = + bfin_write_emudat_chars( + circ_byte(&bfin_jc_write_buf, tail + 0), + circ_byte(&bfin_jc_write_buf, tail + 1), + circ_byte(&bfin_jc_write_buf, tail + 2), + circ_byte(&bfin_jc_write_buf, tail + 3) + ); + bfin_jc_write_buf.tail += ate; + outbound_len -= ate; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty) + tty_wakeup(tty); + mutex_unlock(&bfin_jc_tty_mutex); + debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); + } + } + } + + __set_current_state(TASK_RUNNING); + return 0; +} + +static int +bfin_jc_open(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("open %lu\n", bfin_jc_count); + ++bfin_jc_count; + bfin_jc_tty = tty; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); + return 0; +} + +static void +bfin_jc_close(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("close %lu\n", bfin_jc_count); + if (--bfin_jc_count == 0) + bfin_jc_tty = NULL; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); +} + +/* XXX: we dont handle the put_char() case where we must handle count = 1 */ +static int +bfin_jc_circ_write(const unsigned char *buf, int count) +{ + int i; + count = min(count, circ_free(&bfin_jc_write_buf)); + debug("going to write chunk of %i bytes\n", count); + for (i = 0; i < count; ++i) + circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; + bfin_jc_write_buf.head += i; + return i; +} + +#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE +# define acquire_console_sem() +# define release_console_sem() +#endif +static int +bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int i; + acquire_console_sem(); + i = bfin_jc_circ_write(buf, count); + release_console_sem(); + wake_up_process(bfin_jc_kthread); + return i; +} + +static void +bfin_jc_flush_chars(struct tty_struct *tty) +{ + wake_up_process(bfin_jc_kthread); +} + +static int +bfin_jc_write_room(struct tty_struct *tty) +{ + return circ_free(&bfin_jc_write_buf); +} + +static int +bfin_jc_chars_in_buffer(struct tty_struct *tty) +{ + return circ_cnt(&bfin_jc_write_buf); +} + +static void +bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long expire = jiffies + timeout; + while (!circ_empty(&bfin_jc_write_buf)) { + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} + +static struct tty_operations bfin_jc_ops = { + .open = bfin_jc_open, + .close = bfin_jc_close, + .write = bfin_jc_write, + /*.put_char = bfin_jc_put_char,*/ + .flush_chars = bfin_jc_flush_chars, + .write_room = bfin_jc_write_room, + .chars_in_buffer = bfin_jc_chars_in_buffer, + .wait_until_sent = bfin_jc_wait_until_sent, +}; + +static int __init bfin_jc_init(void) +{ + int ret; + + bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); + if (IS_ERR(bfin_jc_kthread)) + return PTR_ERR(bfin_jc_kthread); + + ret = -ENOMEM; + + bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; + bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); + if (!bfin_jc_write_buf.buf) + goto err; + + bfin_jc_driver = alloc_tty_driver(1); + if (!bfin_jc_driver) + goto err; + + bfin_jc_driver->owner = THIS_MODULE; + bfin_jc_driver->driver_name = DRV_NAME; + bfin_jc_driver->name = DEV_NAME; + bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; + bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; + bfin_jc_driver->init_termios = tty_std_termios; + tty_set_operations(bfin_jc_driver, &bfin_jc_ops); + + ret = tty_register_driver(bfin_jc_driver); + if (ret) + goto err; + + pr_init(KERN_INFO DRV_NAME ": initialized\n"); + + return 0; + + err: + put_tty_driver(bfin_jc_driver); + kfree(bfin_jc_write_buf.buf); + kthread_stop(bfin_jc_kthread); + return ret; +} +module_init(bfin_jc_init); + +static void __exit bfin_jc_exit(void) +{ + kthread_stop(bfin_jc_kthread); + kfree(bfin_jc_write_buf.buf); + tty_unregister_driver(bfin_jc_driver); + put_tty_driver(bfin_jc_driver); +} +module_exit(bfin_jc_exit); + +#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static void +bfin_jc_straight_buffer_write(const char *buf, unsigned count) +{ + unsigned ate = 0; + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat(count); + while (ate < count) { + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); + ate += 4; + } +} +#endif + +#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE +static void +bfin_jc_console_write(struct console *co, const char *buf, unsigned count) +{ + if (bfin_jc_kthread == NULL) + bfin_jc_straight_buffer_write(buf, count); + else + bfin_jc_circ_write(buf, count); +} + +static struct tty_driver * +bfin_jc_console_device(struct console *co, int *index) +{ + *index = co->index; + return bfin_jc_driver; +} + +static struct console bfin_jc_console = { + .name = DEV_NAME, + .write = bfin_jc_console_write, + .device = bfin_jc_console_device, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +static int __init bfin_jc_console_init(void) +{ + register_console(&bfin_jc_console); + return 0; +} +console_initcall(bfin_jc_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +static void __init +bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) +{ + bfin_jc_straight_buffer_write(buf, count); +} + +static struct __initdata console bfin_jc_early_console = { + .name = "early_BFJC", + .write = bfin_jc_early_write, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +struct console * __init +bfin_jc_early_init(unsigned int port, unsigned int cflag) +{ + return &bfin_jc_early_console; +} +#endif + +MODULE_AUTHOR("Mike Frysinger "); +MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-18-g5258 From 26a2e20f4a966bebc312836aeb4423fbfd4e33e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:03:13 +0100 Subject: tty: Untangle termios and mm mutex dependencies Although this doesn't cause any problems it could potentially do so for future mmap using devices. No real work is needed to sort it out so untangle it before it causes problems Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ioctl.c | 75 +++++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 2401dbcbee9..8116bb1c8f8 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -626,9 +626,25 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return 0; } +static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + +static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios_locked, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + static int get_termio(struct tty_struct *tty, struct termio __user *termio) { - if (kernel_termios_to_user_termio(termio, tty->termios)) + struct ktermios kterm; + copy_termios(tty, &kterm); + if (kernel_termios_to_user_termio(termio, &kterm)) return -EFAULT; return 0; } @@ -930,6 +946,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, struct tty_struct *real_tty; void __user *p = (void __user *)arg; int ret = 0; + struct ktermios kterm; + struct termiox ktermx; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) @@ -965,23 +983,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_OLD); #ifndef TCGETS2 case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; #else case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCGETS2: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCSETSF2: return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); @@ -1000,34 +1015,36 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_TERMIO); #ifndef TCGETS2 case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios(real_tty->termios_locked, + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); - return ret; + return 0; #else case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios_1(real_tty->termios_locked, + return -EPERM; + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios_1(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); return ret; #endif @@ -1036,9 +1053,10 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, if (real_tty->termiox == NULL) return -EINVAL; mutex_lock(&real_tty->termios_mutex); - if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox))) - ret = -EFAULT; + memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox)); mutex_unlock(&real_tty->termios_mutex); + if (copy_to_user(p, &ktermx, sizeof(struct termiox))) + ret = -EFAULT; return ret; case TCSETX: return set_termiox(real_tty, p, 0); @@ -1048,10 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termiox(real_tty, p, TERMIOS_FLUSH); #endif case TIOCGSOFTCAR: - mutex_lock(&real_tty->termios_mutex); - ret = put_user(C_CLOCAL(real_tty) ? 1 : 0, + copy_termios(real_tty, &kterm); + ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0, (int __user *)arg); - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSSOFTCAR: if (get_user(arg, (unsigned int __user *) arg)) -- cgit v1.2.3-18-g5258 From 34aec591847c696339189b070cce2a11f901cfea Mon Sep 17 00:00:00 2001 From: Richard Röjfors Date: Thu, 11 Jun 2009 14:05:39 +0100 Subject: serial: Added Timberdale UART driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver for the UART found in the Timberdale FPGA Signed-off-by: Richard Röjfors Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 7 + drivers/serial/Makefile | 1 + drivers/serial/timbuart.c | 520 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/serial/timbuart.h | 58 ++++++ 4 files changed, 586 insertions(+) create mode 100644 drivers/serial/timbuart.c create mode 100644 drivers/serial/timbuart.h (limited to 'drivers') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 343e3a35b6a..3391ef0d761 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1433,4 +1433,11 @@ config SPORT_BAUD_RATE default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) +config SERIAL_TIMBERDALE + tristate "Support for timberdale UART" + depends on MFD_TIMBERDALE + select SERIAL_CORE + ---help--- + Add support for UART controller on timberdale. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d438eb2a73d..45a8658f54d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o +obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c new file mode 100644 index 00000000000..30ba3c4cc18 --- /dev/null +++ b/drivers/serial/timbuart.c @@ -0,0 +1,520 @@ +/* + * timbuart.c timberdale FPGA UART driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#include +#include +#include +#include +#include +#include + +#include "timbuart.h" + +struct timbuart_port { + struct uart_port port; + struct tasklet_struct tasklet; + int usedma; + u8 last_ier; + struct platform_device *dev; +}; + +static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, + 921600, 1843200, 3250000}; + +static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier); + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); + +static void timbuart_stop_rx(struct uart_port *port) +{ + /* spin lock held by upper layer, disable all RX interrupts */ + u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS; + iowrite8(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_stop_tx(struct uart_port *port) +{ + /* spinlock held by upper layer, disable TX interrupt */ + u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE; + iowrite8(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_start_tx(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + /* do not transfer anything here -> fire off the tasklet */ + tasklet_schedule(&uart->tasklet); +} + +static void timbuart_flush_buffer(struct uart_port *port) +{ + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX; + + iowrite8(ctl, port->membase + TIMBUART_CTRL); + iowrite8(TXBF, port->membase + TIMBUART_ISR); +} + +static void timbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->info->port.tty; + + while (ioread8(port->membase + TIMBUART_ISR) & RXDP) { + u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); + port->icount.rx++; + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(port->info->port.tty); + spin_lock(&port->lock); + + dev_dbg(port->dev, "%s - total read %d bytes\n", + __func__, port->icount.rx); +} + +static void timbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) && + !uart_circ_empty(xmit)) { + iowrite8(xmit->buf[xmit->tail], + port->membase + TIMBUART_TXFIFO); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + dev_dbg(port->dev, + "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", + __func__, + port->icount.tx, + ioread8(port->membase + TIMBUART_CTRL), + port->mctrl & TIOCM_RTS, + ioread8(port->membase + TIMBUART_BAUDRATE)); +} + +static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + struct circ_buf *xmit = &port->info->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + if (port->x_char) + return; + + if (isr & TXFLAGS) { + timbuart_tx_chars(port); + /* clear all TX interrupts */ + iowrite8(TXFLAGS, port->membase + TIMBUART_ISR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } else + /* Re-enable any tx interrupt */ + *ier |= uart->last_ier & TXFLAGS; + + /* enable interrupts if there are chars in the transmit buffer, + * Or if we delivered some bytes and want the almost empty interrupt + * we wake up the upper layer later when we got the interrupt + * to give it some time to go out... + */ + if (!uart_circ_empty(xmit)) + *ier |= TXBAE; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier) +{ + if (isr & RXFLAGS) { + /* Some RX status is set */ + if (isr & RXBF) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHRX; + iowrite8(ctl, port->membase + TIMBUART_CTRL); + port->icount.overrun++; + } else if (isr & (RXDP)) + timbuart_rx_chars(port); + + /* ack all RX interrupts */ + iowrite8(RXFLAGS, port->membase + TIMBUART_ISR); + } + + /* always have the RX interrupts enabled */ + *ier |= RXBAF | RXBF | RXTT; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_tasklet(unsigned long arg) +{ + struct timbuart_port *uart = (struct timbuart_port *)arg; + u8 isr, ier = 0; + + spin_lock(&uart->port.lock); + + isr = ioread8(uart->port.membase + TIMBUART_ISR); + dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); + + if (!uart->usedma) + timbuart_handle_tx_port(&uart->port, isr, &ier); + + timbuart_mctrl_check(&uart->port, isr, &ier); + + if (!uart->usedma) + timbuart_handle_rx_port(&uart->port, isr, &ier); + + iowrite8(ier, uart->port.membase + TIMBUART_IER); + + spin_unlock(&uart->port.lock); + dev_dbg(uart->port.dev, "%s leaving\n", __func__); +} + +static unsigned int timbuart_tx_empty(struct uart_port *port) +{ + u8 isr = ioread8(port->membase + TIMBUART_ISR); + + return (isr & TXBAE) ? TIOCSER_TEMT : 0; +} + +static unsigned int timbuart_get_mctrl(struct uart_port *port) +{ + u8 cts = ioread8(port->membase + TIMBUART_CTRL); + dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); + + if (cts & TIMBUART_CTRL_CTS) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); + + if (mctrl & TIOCM_RTS) + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); + else + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); +} + +static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier) +{ + unsigned int cts; + + if (isr & CTS_DELTA) { + /* ack */ + iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR); + cts = timbuart_get_mctrl(port); + uart_handle_cts_change(port, cts & TIOCM_CTS); + wake_up_interruptible(&port->info->delta_msr_wait); + } + + *ier |= CTS_DELTA; +} + +static void timbuart_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void timbuart_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int timbuart_startup(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + dev_dbg(port->dev, "%s\n", __func__); + + iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); + iowrite8(0xff, port->membase + TIMBUART_ISR); + /* Enable all but TX interrupts */ + iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA, + port->membase + TIMBUART_IER); + + return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, + "timb-uart", uart); +} + +static void timbuart_shutdown(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + dev_dbg(port->dev, "%s\n", __func__); + free_irq(port->irq, uart); + iowrite8(0, port->membase + TIMBUART_IER); +} + +static int get_bindex(int baud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(baudrates); i++) + if (baud == baudrates[i]) + return i; + + return -1; +} + +static void timbuart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + short bindex; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + bindex = get_bindex(baud); + dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); + + if (bindex < 0) { + printk(KERN_ALERT "timbuart: Unsupported baud rate\n"); + } else { + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); + } +} + +static const char *timbuart_type(struct uart_port *port) +{ + return port->type == PORT_UNKNOWN ? "timbuart" : NULL; +} + +/* We do not request/release mappings of the registers here, + * currently it's done in the proble function. + */ +static void timbuart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); +} + +static int timbuart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (!request_mem_region(port->mapbase, size, "timb-uart")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) +{ + struct timbuart_port *uart = (struct timbuart_port *)devid; + + if (ioread8(uart->port.membase + TIMBUART_IPR)) { + uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER); + + /* disable interrupts, the tasklet enables them again */ + iowrite8(0, uart->port.membase + TIMBUART_IER); + + /* fire off bottom half */ + tasklet_schedule(&uart->tasklet); + + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * Configure/autoconfigure the port. + */ +static void timbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_TIMBUART; + timbuart_request_port(port); + } +} + +static int timbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static struct uart_ops timbuart_ops = { + .tx_empty = timbuart_tx_empty, + .set_mctrl = timbuart_set_mctrl, + .get_mctrl = timbuart_get_mctrl, + .stop_tx = timbuart_stop_tx, + .start_tx = timbuart_start_tx, + .flush_buffer = timbuart_flush_buffer, + .stop_rx = timbuart_stop_rx, + .enable_ms = timbuart_enable_ms, + .break_ctl = timbuart_break_ctl, + .startup = timbuart_startup, + .shutdown = timbuart_shutdown, + .set_termios = timbuart_set_termios, + .type = timbuart_type, + .release_port = timbuart_release_port, + .request_port = timbuart_request_port, + .config_port = timbuart_config_port, + .verify_port = timbuart_verify_port +}; + +static struct uart_driver timbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "timberdale_uart", + .dev_name = "ttyTU", + .major = TIMBUART_MAJOR, + .minor = TIMBUART_MINOR, + .nr = 1 +}; + +static int timbuart_probe(struct platform_device *dev) +{ + int err; + struct timbuart_port *uart; + struct resource *iomem; + + dev_dbg(&dev->dev, "%s\n", __func__); + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + err = -EINVAL; + goto err_mem; + } + + uart->usedma = 0; + + uart->port.uartclk = 3250000 * 16; + uart->port.fifosize = TIMBUART_FIFO_SIZE; + uart->port.regshift = 2; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &timbuart_ops; + uart->port.irq = 0; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = 0; + uart->port.dev = &dev->dev; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) { + err = -ENOMEM; + goto err_register; + } + uart->port.mapbase = iomem->start; + uart->port.membase = NULL; + + uart->port.irq = platform_get_irq(dev, 0); + if (uart->port.irq < 0) { + err = -EINVAL; + goto err_register; + } + + tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); + + err = uart_register_driver(&timbuart_driver); + if (err) + goto err_register; + + err = uart_add_one_port(&timbuart_driver, &uart->port); + if (err) + goto err_add_port; + + platform_set_drvdata(dev, uart); + + return 0; + +err_add_port: + uart_unregister_driver(&timbuart_driver); +err_register: + kfree(uart); +err_mem: + printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", + err); + + return err; +} + +static int timbuart_remove(struct platform_device *dev) +{ + struct timbuart_port *uart = platform_get_drvdata(dev); + + tasklet_kill(&uart->tasklet); + uart_remove_one_port(&timbuart_driver, &uart->port); + uart_unregister_driver(&timbuart_driver); + kfree(uart); + + return 0; +} + +static struct platform_driver timbuart_platform_driver = { + .driver = { + .name = "timb-uart", + .owner = THIS_MODULE, + }, + .probe = timbuart_probe, + .remove = timbuart_remove, +}; + +/*--------------------------------------------------------------------------*/ + +static int __init timbuart_init(void) +{ + return platform_driver_register(&timbuart_platform_driver); +} + +static void __exit timbuart_exit(void) +{ + platform_driver_unregister(&timbuart_platform_driver); +} + +module_init(timbuart_init); +module_exit(timbuart_exit); + +MODULE_DESCRIPTION("Timberdale UART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:timb-uart"); + diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h new file mode 100644 index 00000000000..7e566766bc4 --- /dev/null +++ b/drivers/serial/timbuart.h @@ -0,0 +1,58 @@ +/* + * timbuart.c timberdale FPGA GPIO driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#ifndef _TIMBUART_H +#define _TIMBUART_H + +#define TIMBUART_FIFO_SIZE 2048 + +#define TIMBUART_RXFIFO 0x08 +#define TIMBUART_TXFIFO 0x0c +#define TIMBUART_IER 0x10 +#define TIMBUART_IPR 0x14 +#define TIMBUART_ISR 0x18 +#define TIMBUART_CTRL 0x1c +#define TIMBUART_BAUDRATE 0x20 + +#define TIMBUART_CTRL_RTS 0x01 +#define TIMBUART_CTRL_CTS 0x02 +#define TIMBUART_CTRL_FLSHTX 0x40 +#define TIMBUART_CTRL_FLSHRX 0x80 + +#define TXBF 0x01 +#define TXBAE 0x02 +#define CTS_DELTA 0x04 +#define RXDP 0x08 +#define RXBAF 0x10 +#define RXBF 0x20 +#define RXTT 0x40 +#define RXBNAE 0x80 +#define TXBE 0x100 + +#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) +#define TXFLAGS (TXBF | TXBAE) + +#define TIMBUART_MAJOR 204 +#define TIMBUART_MINOR 192 + +#endif /* _TIMBUART_H */ + -- cgit v1.2.3-18-g5258 From 7d55deaf50182c47c1e805dc8cc85f2769f0673e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:27:13 +0100 Subject: timbuart: Fix the termios logic The driver only handles speeds but it fails to return the current values for the hardware features it does not support. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/timbuart.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 30ba3c4cc18..ac9e5d5f742 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -278,7 +278,7 @@ static int get_bindex(int baud) int i; for (i = 0; i < ARRAY_SIZE(baudrates); i++) - if (baud == baudrates[i]) + if (baud <= baudrates[i]) return i; return -1; @@ -296,14 +296,20 @@ static void timbuart_set_termios(struct uart_port *port, bindex = get_bindex(baud); dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); - if (bindex < 0) { - printk(KERN_ALERT "timbuart: Unsupported baud rate\n"); - } else { - spin_lock_irqsave(&port->lock, flags); - iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); - uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); - } + if (bindex < 0) + bindex = 0; + baud = baudrates[bindex]; + + /* The serial layer calls into this once with old = NULL when setting + up initially */ + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); } static const char *timbuart_type(struct uart_port *port) -- cgit v1.2.3-18-g5258 From 00b040deca907a113f5bef67a6cc7a4f65a5ace9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:29:29 +0100 Subject: tty: resolve some sierra breakage The various merges into the sierra driver inadvertently undid commit 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa by Elina Pasheva . Put it back so the OBEX port works again. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 1319b8968d8..222a6230276 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -257,8 +257,19 @@ static int sierra_send_setup(struct usb_serial_port *port) val |= 0x02; /* If composite device then properly report interface */ - if (serial->num_ports == 1) + if (serial->num_ports == 1) { interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + } /* Otherwise the need to do non-composite mapping */ else { @@ -268,11 +279,11 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - } - return usb_control_msg(serial->dev, + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + } return 0; } -- cgit v1.2.3-18-g5258 From b9a44bc19f48fd82b8f411500a9bb0ea4153d23c Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 11 Jun 2009 14:30:21 +0100 Subject: sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 228 ++++++++++++++++++++++++++++---------------- 1 file changed, 144 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 222a6230276..88ec7bfd9d3 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -26,12 +26,10 @@ #include #include #include -#include #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -/* per port private data */ #define N_IN_URB 4 #define N_OUT_URB 4 #define IN_BUFLEN 4096 @@ -229,7 +227,6 @@ struct sierra_port_private { /* Input endpoints and buffers for this port */ struct urb *in_urbs[N_IN_URB]; - char *in_buffer[N_IN_URB]; /* Settings for the port */ int rts_state; /* Handshaking pins (outputs) */ @@ -334,6 +331,17 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file, return sierra_send_setup(port); } +static void sierra_release_urb(struct urb *urb) +{ + struct usb_serial_port *port; + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } +} + static void sierra_outdat_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -458,7 +466,7 @@ static void sierra_indat_callback(struct urb *urb) " received", __func__); /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN) { + if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -550,100 +558,184 @@ static int sierra_write_room(struct tty_struct *tty) return 2048; } -static int sierra_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_stop_rx_urbs(struct usb_serial_port *port) { - struct sierra_port_private *portdata; - struct usb_serial *serial = port->serial; int i; - struct urb *urb; - int result; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - portdata = usb_get_serial_port_data(port); + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) + usb_kill_urb(portdata->in_urbs[i]); - dev_dbg(&port->dev, "%s", __func__); + usb_kill_urb(port->interrupt_in_urb); +} - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; +static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags) +{ + int ok_cnt; + int err = -EINVAL; + int i; + struct urb *urb; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - /* Reset low level data toggle and start reading from endpoints */ - for (i = 0; i < N_IN_URB; i++) { + ok_cnt = 0; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { urb = portdata->in_urbs[i]; if (!urb) continue; - if (urb->dev != serial->dev) { - dev_dbg(&port->dev, "%s: dev %p != %p", - __func__, urb->dev, serial->dev); - continue; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", + __func__, err); + } else { + ok_cnt++; } + } - /* - * make sure endpoint data toggle is synchronized with the - * device - */ - usb_clear_halt(urb->dev, urb->pipe); - - result = usb_submit_urb(urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "submit urb %d failed (%d) %d\n", - i, result, urb->transfer_buffer_length); + if (ok_cnt && port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit intr urb failed: %d\n", + __func__, err); } } - sierra_send_setup(port); + if (ok_cnt > 0) /* at least one rx urb submitted */ + return 0; + else + return err; +} + +static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, int len, + gfp_t mem_flags, + usb_complete_t callback) +{ + struct urb *urb; + u8 *buf; + + if (endpoint == -1) + return NULL; - /* start up the interrupt endpoint if we have one */ - if (port->interrupt_in_urb) { - result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, "submit irq_in urb failed %d\n", - result); + urb = usb_alloc_urb(0, mem_flags); + if (urb == NULL) { + dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n", + __func__, endpoint); + return NULL; } - return 0; + + buf = kmalloc(len, mem_flags); + if (buf) { + /* Fill URB using supplied data */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + /* debug */ + dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + } else { + dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + + sierra_release_urb(urb); + urb = NULL; + } + + return urb; } -static void sierra_dtr_rts(struct usb_serial_port *port, int on) +static void sierra_close(struct usb_serial_port *port) { + int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; + dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); - portdata->rts_state = on; - portdata->dtr_state = on; + + portdata->rts_state = 0; + portdata->dtr_state = 0; if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ + for (i = 0; i < N_IN_URB; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } } } -static void sierra_close(struct usb_serial_port *port) +static int sierra_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { + struct sierra_port_private *portdata; + struct usb_serial *serial = port->serial; int i; + int err; + int endpoint; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s", __func__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + + endpoint = port->bulk_in_endpointAddress; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); + portdata->in_urbs[i] = urb; + } + /* clear halt condition */ + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ + sierra_close(port); + return err; + } + sierra_send_setup(port); + + return 0; +} + + +static void sierra_dtr_rts(struct usb_serial_port *port, int on) +{ struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); + portdata->rts_state = on; + portdata->dtr_state = on; if (serial->dev) { - /* Stop reading/writing urbs */ - for (i = 0; i < N_IN_URB; i++) - usb_kill_urb(portdata->in_urbs[i]); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + sierra_send_setup(port); + mutex_unlock(&serial->disc_mutex); } - usb_kill_urb(port->interrupt_in_urb); } static int sierra_startup(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_port_private *portdata; - struct urb *urb; int i; - int j; dev_dbg(&serial->dev->dev, "%s", __func__); @@ -665,34 +757,8 @@ static int sierra_startup(struct usb_serial *serial) return -ENOMEM; } spin_lock_init(&portdata->lock); - for (j = 0; j < N_IN_URB; j++) { - portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL); - if (!portdata->in_buffer[j]) { - for (--j; j >= 0; j--) - kfree(portdata->in_buffer[j]); - kfree(portdata); - return -ENOMEM; - } - } - + /* Set the port private data pointer */ usb_set_serial_port_data(port, portdata); - - /* initialize the in urbs */ - for (j = 0; j < N_IN_URB; ++j) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) { - dev_dbg(&port->dev, "%s: alloc for in " - "port failed.", __func__); - continue; - } - /* Fill URB using supplied data. */ - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - portdata->in_buffer[j], IN_BUFLEN, - sierra_indat_callback, port); - portdata->in_urbs[j] = urb; - } } return 0; @@ -700,7 +766,7 @@ static int sierra_startup(struct usb_serial *serial) static void sierra_shutdown(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -713,12 +779,6 @@ static void sierra_shutdown(struct usb_serial *serial) portdata = usb_get_serial_port_data(port); if (!portdata) continue; - - for (j = 0; j < N_IN_URB; j++) { - usb_kill_urb(portdata->in_urbs[j]); - usb_free_urb(portdata->in_urbs[j]); - kfree(portdata->in_buffer[j]); - } kfree(portdata); usb_set_serial_port_data(port, NULL); } -- cgit v1.2.3-18-g5258 From 4db2299da213d1ba8cf7f4c0a197ae7ba49db5cb Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 11 Jun 2009 14:32:01 +0100 Subject: sierra: driver interface blacklisting Interface blacklisting is necessary for non-serial interfaces that are handled by a different driver. The interface blacklisting is implemented in sierra driver per device. Each device in need of a blacklist has a static information array kept in the driver. This array contains the interface numbers that are blacklisted. The pointer for each blacklist array and the length of that blacklist are 'bundled' in data structure sierra_iface_info. A pointer to this information is set in id_table when the device is added to the id_table. The following is summary of changes we have made to sierra.c driver in this patch dealing with interface blacklisting support: - Added data structure sierra_iface_info and function is_blacklisted() to support blacklisting - Modified sierra_probe() to handle blacklisted interfaces accordingly - Improved comments in id_table - Added new device in id_table with blacklist interface support Signed-off-by: Elina Pasheva Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 51 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 88ec7bfd9d3..17ac34f4d66 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -37,6 +37,12 @@ static int debug; static int nmea; +/* Used in interface blacklisting */ +struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ +}; + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; @@ -83,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial) return result; } +static int is_blacklisted(const u8 ifnum, + const struct sierra_iface_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return 1; + } + } + return 0; +} + static int sierra_calc_interface(struct usb_serial *serial) { int interface; @@ -151,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial, */ usb_set_serial_data(serial, (void *)num_ports); + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); + + if (is_blacklisted(ifnum, + (struct sierra_iface_info *)id->driver_info)) { + dev_dbg(&serial->dev->dev, + "Ignoring blacklisted interface #%d\n", ifnum); + return -ENODEV; + } + return result; } +static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; +static const struct sierra_iface_info direct_ip_interface_blacklist = { + .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), + .ifaceinfo = direct_ip_non_serial_ifaces, +}; + static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ @@ -186,9 +225,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ - { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ + { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ @@ -209,6 +250,10 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ + { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + { } }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.3-18-g5258 From 5fc5b42a3bb564f0b6e03f0f1b522ed9100250ad Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 14:32:42 +0100 Subject: tty: remove sleep_on Use wait_event instead of sleep_on in tty_block_til_ready. Wait for ASYNC_CLOSING flag being 0. Signed-off-by: Jiri Slaby Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 4d08b6d27c2..931af103074 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -198,7 +198,8 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); + wait_event_interruptible(port->close_wait, + !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else -- cgit v1.2.3-18-g5258 From 3e3b5c087799e536871c8261b05bc28e4783c8da Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 14:33:37 +0100 Subject: tty: use prepare/finish_wait Use prepare_to_wait and finish_wait instead of add_wait_queue and remove_wait_queue. This avoids us setting a task state. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 931af103074..62dadfc95e3 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -222,7 +222,6 @@ int tty_port_block_til_ready(struct tty_port *port, before the next open may complete */ retval = 0; - add_wait_queue(&port->open_wait, &wait); /* The port lock protects the port counts */ spin_lock_irqsave(&port->lock, flags); @@ -236,7 +235,7 @@ int tty_port_block_til_ready(struct tty_port *port, if (tty->termios->c_cflag & CBAUD) tty_port_raise_dtr_rts(port); - set_current_state(TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); /* Check for a hangup or uninitialised port. Return accordingly */ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) @@ -257,8 +256,7 @@ int tty_port_block_til_ready(struct tty_port *port, } schedule(); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); + finish_wait(&port->open_wait, &wait); /* Update counts. A parallel hangup will have set count to zero and we must not mess that up further */ -- cgit v1.2.3-18-g5258 From d3810cd4d7064b109574374f73c41b11b481dbf2 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:35:01 +0100 Subject: imx: serial: fix whitespaces (no changes in functionality) Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 5f0be40dfda..76c8fa1884e 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -302,8 +302,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) /* send xmit->buf[xmit->tail] * out the port here */ writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); sport->port.icount.tx++; if (uart_circ_empty(xmit)) break; @@ -395,8 +394,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) continue; } - if (uart_handle_sysrq_char - (&sport->port, (unsigned char)rx)) + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) continue; if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { @@ -471,26 +469,26 @@ static unsigned int imx_tx_empty(struct uart_port *port) */ static unsigned int imx_get_mctrl(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + struct imx_port *sport = (struct imx_port *)port; + unsigned int tmp = TIOCM_DSR | TIOCM_CAR; - if (readl(sport->port.membase + USR1) & USR1_RTSS) - tmp |= TIOCM_CTS; + if (readl(sport->port.membase + USR1) & USR1_RTSS) + tmp |= TIOCM_CTS; - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; + if (readl(sport->port.membase + UCR2) & UCR2_CTS) + tmp |= TIOCM_RTS; - return tmp; + return tmp; } static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = (struct imx_port *)port; unsigned long temp; temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - if (mctrl & TIOCM_RTS) + if (mctrl & TIOCM_RTS) temp |= UCR2_CTS; writel(temp, sport->port.membase + UCR2); @@ -1072,22 +1070,22 @@ static struct uart_driver imx_reg = { static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) { - struct imx_port *sport = platform_get_drvdata(dev); + struct imx_port *sport = platform_get_drvdata(dev); - if (sport) - uart_suspend_port(&imx_reg, &sport->port); + if (sport) + uart_suspend_port(&imx_reg, &sport->port); - return 0; + return 0; } static int serial_imx_resume(struct platform_device *dev) { - struct imx_port *sport = platform_get_drvdata(dev); + struct imx_port *sport = platform_get_drvdata(dev); - if (sport) - uart_resume_port(&imx_reg, &sport->port); + if (sport) + uart_resume_port(&imx_reg, &sport->port); - return 0; + return 0; } static int serial_imx_probe(struct platform_device *pdev) @@ -1143,7 +1141,7 @@ static int serial_imx_probe(struct platform_device *pdev) imx_ports[pdev->id] = sport; pdata = pdev->dev.platform_data; - if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) + if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; if (pdata->init) { @@ -1193,13 +1191,13 @@ static int serial_imx_remove(struct platform_device *pdev) } static struct platform_driver serial_imx_driver = { - .probe = serial_imx_probe, - .remove = serial_imx_remove, + .probe = serial_imx_probe, + .remove = serial_imx_remove, .suspend = serial_imx_suspend, .resume = serial_imx_resume, .driver = { - .name = "imx-uart", + .name = "imx-uart", .owner = THIS_MODULE, }, }; -- cgit v1.2.3-18-g5258 From 26bbb3ff1ff6163d6a233055766e26af8054a212 Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Thu, 11 Jun 2009 14:36:29 +0100 Subject: imx: serial: fix one bit field type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "have_rtscts" is assigned 1, while it is declared int:1, two's complement, which can hold 0 and -1 only. The code works, as the upper bits are cut off, and tests are done against 0 only. Nonetheless, correctly declaring the bit field as unsigned int:1 renders the code more robust. Signed-off-by: Daniel Glöckner Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 76c8fa1884e..6b8f12f4a70 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -211,7 +211,7 @@ struct imx_port { struct timer_list timer; unsigned int old_status; int txirq,rxirq,rtsirq; - int have_rtscts:1; + unsigned int have_rtscts:1; struct clk *clk; }; -- cgit v1.2.3-18-g5258 From 977757311e50dc5d832c9fef34e7555411f7ccd8 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:37:19 +0100 Subject: imx: serial: notify higher layers in case xmit IRQ was not called upper layers, namely line discipline, need to be notified when transmission of more data is possible. For spurious cases, where IRQ handling does not supply notification for sure, it is given additionally here, when data has just been transmitted and space in the buffer will most probably be available. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6b8f12f4a70..49f2e12ba58 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -308,6 +308,9 @@ static inline void imx_transmit_buffer(struct imx_port *sport) break; } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + if (uart_circ_empty(xmit)) imx_stop_tx(&sport->port); } -- cgit v1.2.3-18-g5258 From 2e1463922a35584c863f71d4021e1e71f76eaed0 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:38:38 +0100 Subject: imx: serial: be sure to stop xmit upon shutdown needed to avoid continued transmission by hardware while software already shuts down, which might cause dangling characters to show up in hardware queues when restarting the device. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 49f2e12ba58..e6c2ba26dcb 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -634,6 +634,10 @@ static void imx_shutdown(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + /* * Stop our timer. */ -- cgit v1.2.3-18-g5258 From 9f322ad064f9210e7d472dfe77e702274d5c9dba Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Thu, 11 Jun 2009 14:39:21 +0100 Subject: imx: serial: handle initialisation failure correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit correctly de-initialise device when setting up failed, call to pdata->exit() was missing. Signed-off-by: Daniel Glöckner Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e6c2ba26dcb..cbd4f322464 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1157,10 +1157,15 @@ static int serial_imx_probe(struct platform_device *pdev) goto clkput; } - uart_add_one_port(&imx_reg, &sport->port); + ret = uart_add_one_port(&imx_reg, &sport->port); + if (ret) + goto deinit; platform_set_drvdata(pdev, &sport->port); return 0; +deinit: + if (pdata->exit) + pdata->exit(pdev); clkput: clk_put(sport->clk); clk_disable(sport->clk); -- cgit v1.2.3-18-g5258 From 534fca068ec8063ec8b67626b3eb34ba6ec86967 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:52:23 +0100 Subject: imx: serial: use rational library function for calculation of numerator and denominator used in baud rate setting, use generic library function for optimum settings. Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 1 + drivers/serial/imx.c | 30 ++++++++++-------------------- 2 files changed, 11 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3391ef0d761..641e800ed69 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -833,6 +833,7 @@ config SERIAL_IMX bool "IMX serial port support" depends on ARM && (ARCH_IMX || ARCH_MXC) select SERIAL_CORE + select RATIONAL help If you have a machine based on a Motorola IMX CPU you can enable its onboard serial port by enabling this option. diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index cbd4f322464..0de81f71f88 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -670,7 +671,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int div, num, denom, ufcr; + unsigned int div, ufcr; + unsigned long num, denom; /* * If we don't support modem control lines, don't allow @@ -772,32 +774,20 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (!div) div = 1; - num = baud; - denom = port->uartclk / div / 16; + rational_best_approximation(16 * div * baud, sport->port.uartclk, + 1 << 16, 1 << 16, &num, &denom); - /* shift num and denom right until they fit into 16 bits */ - while (num > 0x10000 || denom > 0x10000) { - num >>= 1; - denom >>= 1; - } - if (num > 0) - num -= 1; - if (denom > 0) - denom -= 1; - - writel(num, sport->port.membase + UBIR); - writel(denom, sport->port.membase + UBMR); - - if (div == 7) - div = 6; /* 6 in RFDIV means divide by 7 */ - else - div = 6 - div; + num -= 1; + denom -= 1; ufcr = readl(sport->port.membase + UFCR); ufcr = (ufcr & (~UFCR_RFDIV)) | (div << 7); writel(ufcr, sport->port.membase + UFCR); + writel(num, sport->port.membase + UBIR); + writel(denom, sport->port.membase + UBMR); + #ifdef ONEMS writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS); #endif -- cgit v1.2.3-18-g5258 From b6e4913834cd032082e5c76dfade61050212dc98 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:53:18 +0100 Subject: imx: serial: add IrDA support to serial driver Using the iMX serial driver with an IrDA device needs extra peripheral settings and specific timing depending on the transmitter circuitry used. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 176 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 0de81f71f88..8c79e8c2fd4 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -8,6 +8,9 @@ * Author: Sascha Hauer * Copyright (C) 2004 Pengutronix * + * Copyright (C) 2009 emlix GmbH + * Author: Fabian Godehardt (added IrDA support for iMX) + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -41,6 +44,7 @@ #include #include #include +#include #include #include @@ -149,6 +153,7 @@ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ #define USR1_RTSS (1<<14) /* RTS pin status */ @@ -213,9 +218,19 @@ struct imx_port { unsigned int old_status; int txirq,rxirq,rtsirq; unsigned int have_rtscts:1; + unsigned int use_irda:1; + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short trcv_delay; /* transceiver delay */ struct clk *clk; }; +#ifdef CONFIG_IRDA +#define USE_IRDA(sport) ((sport)->use_irda) +#else +#define USE_IRDA(sport) (0) +#endif + /* * Handle any change of modem status signal since we were last called. */ @@ -269,6 +284,48 @@ static void imx_stop_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (USE_IRDA(sport)) { + /* half duplex - wait for end of transmission */ + int n = 256; + while ((--n > 0) && + !(readl(sport->port.membase + USR2) & USR2_TXDC)) { + udelay(5); + barrier(); + } + /* + * irda transceiver - wait a bit more to avoid + * cutoff, hardware dependent + */ + udelay(sport->trcv_delay); + + /* + * half duplex - reactivate receive mode, + * flush receive pipe echo crap + */ + if (readl(sport->port.membase + USR2) & USR2_TXDC) { + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_TCEN); + writel(temp, sport->port.membase + UCR4); + + while (readl(sport->port.membase + URXD0) & + URXD_CHARRDY) + barrier(); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_DREN; + writel(temp, sport->port.membase + UCR4); + } + return; + } + temp = readl(sport->port.membase + UCR1); writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); } @@ -324,9 +381,30 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (USE_IRDA(sport)) { + /* half duplex in IrDA mode; have to disable receive mode */ + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_DREN); + writel(temp, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + } + temp = readl(sport->port.membase + UCR1); writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_TRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_TCEN; + writel(temp, sport->port.membase + UCR4); + } + if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) imx_transmit_buffer(sport); } @@ -536,12 +614,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) if(!ufcr_rfdiv) ufcr_rfdiv = 1; - if(ufcr_rfdiv >= 7) - ufcr_rfdiv = 6; - else - ufcr_rfdiv = 6 - ufcr_rfdiv; - - val |= UFCR_RFDIV & (ufcr_rfdiv << 7); + val |= UFCR_RFDIV_REG(ufcr_rfdiv); writel(val, sport->port.membase + UFCR); @@ -560,8 +633,24 @@ static int imx_startup(struct uart_port *port) * requesting IRQs */ temp = readl(sport->port.membase + UCR4); + + if (USE_IRDA(sport)) + temp |= UCR4_IRSC; + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + if (USE_IRDA(sport)) { + /* reset fifo's and state machines */ + int i = 100; + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && + (--i > 0)) { + udelay(1); + } + } + /* * Allocate the IRQ(s) i.MX1 has three interrupts whereas later * chips only have one interrupt. @@ -577,12 +666,16 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) - goto error_out3; + /* do not use RTS IRQ on IrDA */ + if (!USE_IRDA(sport)) { + retval = request_irq(sport->rtsirq, imx_rtsint, + (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + DRIVER_NAME, sport); + if (retval) + goto error_out3; + } } else { retval = request_irq(sport->port.irq, imx_int, 0, DRIVER_NAME, sport); @@ -599,18 +692,49 @@ static int imx_startup(struct uart_port *port) temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + + if (USE_IRDA(sport)) { + temp |= UCR1_IREN; + temp &= ~(UCR1_RTSDEN); + } + writel(temp, sport->port.membase + UCR1); temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + if (USE_IRDA(sport)) { + /* clear RX-FIFO */ + int i = 64; + while ((--i > 0) && + (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { + barrier(); + } + } + #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 temp = readl(sport->port.membase + UCR3); temp |= UCR3_RXDMUXSEL; writel(temp, sport->port.membase + UCR3); #endif + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR4); + if (sport->irda_inv_rx) + temp |= UCR4_INVR; + else + temp &= ~(UCR4_INVR); + writel(temp | UCR4_DREN, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR3); + if (sport->irda_inv_tx) + temp |= UCR3_INVT; + else + temp &= ~(UCR3_INVT); + writel(temp, sport->port.membase + UCR3); + } + /* * Enable modem status interrupts */ @@ -618,6 +742,16 @@ static int imx_startup(struct uart_port *port) imx_enable_ms(&sport->port); spin_unlock_irqrestore(&sport->port.lock,flags); + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + sport->irda_inv_rx = pdata->irda_inv_rx; + sport->irda_inv_tx = pdata->irda_inv_tx; + sport->trcv_delay = pdata->transceiver_delay; + if (pdata->irda_enable) + pdata->irda_enable(1); + } + return 0; error_out3: @@ -639,6 +773,13 @@ static void imx_shutdown(struct uart_port *port) temp &= ~(UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + if (pdata->irda_enable) + pdata->irda_enable(0); + } + /* * Stop our timer. */ @@ -648,7 +789,8 @@ static void imx_shutdown(struct uart_port *port) * Free the interrupts */ if (sport->txirq > 0) { - free_irq(sport->rtsirq, sport); + if (!USE_IRDA(sport)) + free_irq(sport->rtsirq, sport); free_irq(sport->txirq, sport); free_irq(sport->rxirq, sport); } else @@ -660,6 +802,9 @@ static void imx_shutdown(struct uart_port *port) temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); + if (USE_IRDA(sport)) + temp &= ~(UCR1_IREN); + writel(temp, sport->port.membase + UCR1); } @@ -768,11 +913,19 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, sport->port.membase + UCR2); old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - div = sport->port.uartclk / (baud * 16); - if (div > 7) - div = 7; - if (!div) + if (USE_IRDA(sport)) { + /* + * use maximum available submodule frequency to + * avoid missing short pulses due to low sampling rate + */ div = 1; + } else { + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + } rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); @@ -781,8 +934,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, denom -= 1; ufcr = readl(sport->port.membase + UFCR); - ufcr = (ufcr & (~UFCR_RFDIV)) | - (div << 7); + ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); writel(ufcr, sport->port.membase + UFCR); writel(num, sport->port.membase + UBIR); @@ -1141,6 +1293,11 @@ static int serial_imx_probe(struct platform_device *pdev) if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; +#ifdef CONFIG_IRDA + if (pdata && (pdata->flags & IMXUART_IRDA)) + sport->use_irda = 1; +#endif + if (pdata->init) { ret = pdata->init(pdev); if (ret) -- cgit v1.2.3-18-g5258 From d7f8d437bda0ec409e26cffb846bc28a40603ee3 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:55:22 +0100 Subject: imx: serial: use tty_encode_baud_rate to set true rate real baud rate may be different from the one requested. for upper layers, set the nearest value to the real rate in favour of the rate previously requested. Signed-off-by: Oskar Schirmer Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 8c79e8c2fd4..7b5d1de9cfe 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -818,6 +818,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; unsigned int div, ufcr; unsigned long num, denom; + uint64_t tdiv64; /* * If we don't support modem control lines, don't allow @@ -930,6 +931,12 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_encode_baud_rate(sport->port.info->port.tty, + (speed_t)tdiv64, (speed_t)tdiv64); + num -= 1; denom -= 1; -- cgit v1.2.3-18-g5258 From f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Thu, 11 Jun 2009 14:56:44 +0100 Subject: moxa: prevent opening unavailable ports In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. Signed-off-by: Dirk Eibach Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/moxa.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 4a4cab73d0b..65b6ff2442c 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; ch->port.count++; tty->driver_data = ch; -- cgit v1.2.3-18-g5258 From 2e1483c995bbd0fa6cbd055ad76088a520799ba4 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 11 Jun 2009 13:24:13 +0100 Subject: kmemleak: Remove some of the kmemleak false positives There are allocations for which the main pointer cannot be found but they are not memory leaks. This patch fixes some of them. For more information on false positives, see Documentation/kmemleak.txt. Signed-off-by: Catalin Marinas --- drivers/char/vt.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 08151d4de48..961c1a788c6 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -104,6 +104,7 @@ #include #include #include +#include #define MAX_NR_CON_DRIVER 16 @@ -2880,6 +2881,12 @@ static int __init con_init(void) */ for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data)); + /* + * Kmemleak does not track the memory allocated via + * alloc_bootmem() but this block contains pointers to + * other blocks allocated via kmalloc. + */ + kmemleak_alloc(vc, sizeof(struct vc_data), 1, GFP_ATOMIC); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size); -- cgit v1.2.3-18-g5258 From a5f4f52e82114e85aa1a066bd1a450acc19a464d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Wed, 10 Jun 2009 23:53:37 +0300 Subject: vt: use kzalloc() instead of the bootmem allocator Now that kmem_cache_init() happens before console_init(), we should use kzalloc() and not the bootmem allocator. Signed-off-by: Pekka Enberg --- drivers/char/vt.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 08151d4de48..c796a86ab7f 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -95,7 +95,6 @@ #include #include #include -#include #include #include #include @@ -2875,14 +2874,11 @@ static int __init con_init(void) mod_timer(&console_timer, jiffies + blankinterval); } - /* - * kmalloc is not running yet - we use the bootmem allocator. - */ for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { - vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data)); + vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT); INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); - vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size); + vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT); vc->vc_kmalloced = 0; vc_init(vc, vc->vc_rows, vc->vc_cols, currcons || !vc->vc_sw->con_save_screen); -- cgit v1.2.3-18-g5258 From b8ec757390282e21d349bf6b602a8cb182da0429 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 11 Jun 2009 19:25:37 +0300 Subject: vgacon: use slab allocator instead of the bootmem allocator Slab is initialized before the console subsystem so use the slab allocator in vgacon_scrollback_startup(). Signed-off-by: Pekka Enberg --- drivers/video/console/vgacon.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 38e86b84dce..59d7d5ec17a 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -180,7 +180,7 @@ static inline void vga_set_mem_top(struct vc_data *c) } #ifdef CONFIG_VGACON_SOFT_SCROLLBACK -#include +#include /* software scrollback */ static void *vgacon_scrollback; static int vgacon_scrollback_tail; @@ -210,8 +210,7 @@ static void vgacon_scrollback_init(int pitch) */ static void __init_refok vgacon_scrollback_startup(void) { - vgacon_scrollback = alloc_bootmem(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE - * 1024); + vgacon_scrollback = kcalloc(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, GFP_NOWAIT); vgacon_scrollback_init(vga_video_num_columns * 2); } -- cgit v1.2.3-18-g5258 From 9fd5746fd3d7838bf6ff991d50f1257057d1156f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 21 May 2009 16:01:00 -0400 Subject: fs: Remove i_cindex from struct inode The only user of the i_cindex element in the inode structure is used is by the firewire drivers. As part of an attempt to slim down the inode structure to save memory --- since a typical Linux system will have hundreds of thousands if not millions of inodes cached, a reduction in the size inode has high leverage. The firewire driver does not need i_cindex in any fast path, so it's simple enough to calculate when it is needed, instead of wasting space in the inode structure. Signed-off-by: "Theodore Ts'o" Cc: krh@redhat.com Cc: stefanr@s5r6.in-berlin.de Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- drivers/ieee1394/dv1394.c | 5 +++-- drivers/ieee1394/ieee1394_core.h | 6 +++++- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 823a6297a1a..2cd00b5b45b 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1789,12 +1789,13 @@ static int dv1394_open(struct inode *inode, struct file *file) } else { /* look up the card by ID */ unsigned long flags; + int idx = ieee1394_file_to_instance(file); spin_lock_irqsave(&dv1394_cards_lock, flags); if (!list_empty(&dv1394_cards)) { struct video_card *p; list_for_each_entry(p, &dv1394_cards, list) { - if ((p->id) == ieee1394_file_to_instance(file)) { + if ((p->id) == idx) { video = p; break; } @@ -1803,7 +1804,7 @@ static int dv1394_open(struct inode *inode, struct file *file) spin_unlock_irqrestore(&dv1394_cards_lock, flags); if (!video) { - debug_printk("dv1394: OHCI card %d not found", ieee1394_file_to_instance(file)); + debug_printk("dv1394: OHCI card %d not found", idx); return -ENODEV; } diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h index 21d50f73a21..28b9f58bafd 100644 --- a/drivers/ieee1394/ieee1394_core.h +++ b/drivers/ieee1394/ieee1394_core.h @@ -5,6 +5,7 @@ #include #include #include +#include #include #include "hosts.h" @@ -155,7 +156,10 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size, */ static inline unsigned char ieee1394_file_to_instance(struct file *file) { - return file->f_path.dentry->d_inode->i_cindex; + int idx = cdev_index(file->f_path.dentry->d_inode); + if (idx < 0) + idx = 0; + return idx; } extern int hpsb_disable_irm; -- cgit v1.2.3-18-g5258 From 337eb00a2c3a421999c39c94ce7e33545ee8baa7 Mon Sep 17 00:00:00 2001 From: Alessio Igor Bogani Date: Tue, 12 May 2009 15:10:54 +0200 Subject: Push BKL down into ->remount_fs() [xfs, btrfs, capifs, shmem don't need BKL, exempt] Signed-off-by: Alessio Igor Bogani Signed-off-by: Al Viro --- drivers/usb/core/inode.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index dff5760a37f..ffe75e83787 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "usb.h" #include "hcd.h" @@ -265,9 +266,13 @@ static int remount(struct super_block *sb, int *flags, char *data) return -EINVAL; } + lock_kernel(); + if (usbfs_mount && usbfs_mount->mnt_sb) update_sb(usbfs_mount->mnt_sb); + unlock_kernel(); + return 0; } -- cgit v1.2.3-18-g5258