From b68a890fa3cd977365fda2b1f1ec4e8dc58baddf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 23 May 2007 14:56:45 -0700 Subject: [SCSI] pluto: Use wait_for_completion_timeout. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/scsi/pluto.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c index 3b2e1a53e6e..d953d43fe2e 100644 --- a/drivers/scsi/pluto.c +++ b/drivers/scsi/pluto.c @@ -4,6 +4,7 @@ * */ +#include #include #include #include @@ -50,16 +51,10 @@ static struct ctrl_inquiry { } *fcs __initdata; static int fcscount __initdata = 0; static atomic_t fcss __initdata = ATOMIC_INIT(0); -DECLARE_MUTEX_LOCKED(fc_sem); +static DECLARE_COMPLETION(fc_detect_complete); static int pluto_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd); -static void __init pluto_detect_timeout(unsigned long data) -{ - PLND(("Timeout\n")) - up(&fc_sem); -} - static void __init pluto_detect_done(Scsi_Cmnd *SCpnt) { /* Do nothing */ @@ -69,7 +64,7 @@ static void __init pluto_detect_scsi_done(Scsi_Cmnd *SCpnt) { PLND(("Detect done %08lx\n", (long)SCpnt)) if (atomic_dec_and_test (&fcss)) - up(&fc_sem); + complete(&fc_detect_complete); } int pluto_slave_configure(struct scsi_device *device) @@ -96,7 +91,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt) int i, retry, nplutos; fc_channel *fc; struct scsi_device dev; - DEFINE_TIMER(fc_timer, pluto_detect_timeout, 0, 0); tpnt->proc_name = "pluto"; fcscount = 0; @@ -187,15 +181,11 @@ int __init pluto_detect(struct scsi_host_template *tpnt) } } - fc_timer.expires = jiffies + 10 * HZ; - add_timer(&fc_timer); - - down(&fc_sem); + wait_for_completion_timeout(&fc_detect_complete, 10 * HZ); PLND(("Woken up\n")) if (!atomic_read(&fcss)) break; /* All fc channels have answered us */ } - del_timer_sync(&fc_timer); PLND(("Finished search\n")) for (i = 0, nplutos = 0; i < fcscount; i++) { -- cgit v1.2.3-18-g5258 From 9977e390dd25751fc40e01850da88b37d3c81109 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 19 May 2007 12:06:02 -0700 Subject: [SERIAL] sunzilog: section mismatch fix This patch fixes section mismatch warnings in the sunzilog driver. Signed-off-by: Krzysztof Helt Signed-off-by: David S. Miller --- drivers/serial/sunzilog.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 0985193dc57..15b6e1cb040 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1239,7 +1239,7 @@ static inline struct console *SUNZILOG_CONSOLE(void) #define SUNZILOG_CONSOLE() (NULL) #endif -static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel) +static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel) { int baud, brg; @@ -1259,7 +1259,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe } #ifdef CONFIG_SERIO -static void __init sunzilog_register_serio(struct uart_sunzilog_port *up) +static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) { struct serio *serio = &up->serio; -- cgit v1.2.3-18-g5258 From 5ff263667798946abc15314eae3f341345877d7a Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 22 May 2007 17:03:44 -0700 Subject: [SCSI] jazz_esp: Converted to use esp_core. Use new esp_scsi for JAZZ SCSI host adapter driver Signed-off-by: Thomas Bogendoerfer Signed-off-by: David S. Miller --- drivers/scsi/Makefile | 2 +- drivers/scsi/jazz_esp.c | 429 +++++++++++++++++++++--------------------------- 2 files changed, 184 insertions(+), 247 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 51e884fa10b..fc05d90229a 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -121,7 +121,7 @@ obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_IMM) += imm.o -obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o +obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o obj-$(CONFIG_SCSI_FCAL) += fcal.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c index 19dd4b962e1..81e497d9eae 100644 --- a/drivers/scsi/jazz_esp.c +++ b/drivers/scsi/jazz_esp.c @@ -1,307 +1,244 @@ -/* - * jazz_esp.c: Driver for SCSI chip on Mips Magnum Boards (JAZZ architecture) +/* jazz_esp.c: ESP front-end for MIPS JAZZ systems. * - * Copyright (C) 1997 Thomas Bogendoerfer (tsbogend@alpha.franken.de) - * - * jazz_esp is based on David S. Miller's ESP driver and cyber_esp + * Copyright (C) 2007 Thomas Bogendörfer (tsbogend@alpha.frankende) */ -#include #include -#include #include -#include -#include -#include -#include -#include - -#include "scsi.h" -#include -#include "NCR53C9x.h" +#include +#include +#include +#include +#include #include +#include +#include + #include #include -#include -#include - -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); -static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_dump_state(struct NCR_ESP *esp); -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length); -static void dma_ints_off(struct NCR_ESP *esp); -static void dma_ints_on(struct NCR_ESP *esp); -static int dma_irq_p(struct NCR_ESP *esp); -static int dma_ports_p(struct NCR_ESP *esp); -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write); -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp); -static void dma_advance_sg (struct scsi_cmnd *sp); -static void dma_led_off(struct NCR_ESP *); -static void dma_led_on(struct NCR_ESP *); - - -static volatile unsigned char cmd_buffer[16]; - /* This is where all commands are put - * before they are trasfered to the ESP chip - * via PIO. - */ - -static int jazz_esp_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, NULL); - if (shost->dma_channel != 0xff) - free_dma(shost->dma_channel); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - scsi_unregister(shost); - return 0; -} +#include -/***************************************************************** Detection */ -static int jazz_esp_detect(struct scsi_host_template *tpnt) -{ - struct NCR_ESP *esp; - struct ConfigDev *esp_dev; - - /* - * first assumption it is there:-) - */ - if (1) { - esp_dev = NULL; - esp = esp_allocate(tpnt, esp_dev, 0); - - /* Do command transfer with programmed I/O */ - esp->do_pio_cmds = 1; - - /* Required functions */ - esp->dma_bytes_sent = &dma_bytes_sent; - esp->dma_can_transfer = &dma_can_transfer; - esp->dma_dump_state = &dma_dump_state; - esp->dma_init_read = &dma_init_read; - esp->dma_init_write = &dma_init_write; - esp->dma_ints_off = &dma_ints_off; - esp->dma_ints_on = &dma_ints_on; - esp->dma_irq_p = &dma_irq_p; - esp->dma_ports_p = &dma_ports_p; - esp->dma_setup = &dma_setup; - - /* Optional functions */ - esp->dma_barrier = NULL; - esp->dma_drain = NULL; - esp->dma_invalidate = NULL; - esp->dma_irq_entry = NULL; - esp->dma_irq_exit = NULL; - esp->dma_poll = NULL; - esp->dma_reset = NULL; - esp->dma_led_off = &dma_led_off; - esp->dma_led_on = &dma_led_on; - - /* virtual DMA functions */ - esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; - esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; - esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; - esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; - esp->dma_advance_sg = &dma_advance_sg; - - - /* SCSI chip speed */ - esp->cfreq = 40000000; +#include "esp_scsi.h" - /* - * we don't give the address of DMA channel, but the number - * of DMA channel, so we can use the jazz DMA functions - * - */ - esp->dregs = (void *) JAZZ_SCSI_DMA; - - /* ESP register base */ - esp->eregs = (struct ESP_regs *)(JAZZ_SCSI_BASE); - - /* Set the command buffer */ - esp->esp_command = (volatile unsigned char *)cmd_buffer; - - /* get virtual dma address for command buffer */ - esp->esp_command_dvma = vdma_alloc(CPHYSADDR(cmd_buffer), sizeof (cmd_buffer)); - - esp->irq = JAZZ_SCSI_IRQ; - request_irq(JAZZ_SCSI_IRQ, esp_intr, IRQF_DISABLED, "JAZZ SCSI", - esp->ehost); - - /* - * FIXME, look if the scsi id is available from NVRAM - */ - esp->scsi_id = 7; - - /* Check for differential SCSI-bus */ - /* What is this stuff? */ - esp->diff = 0; - - esp_initialize(esp); - - printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,esps_in_use); - esps_running = esps_in_use; - return esps_in_use; - } - return 0; -} +#define DRV_MODULE_NAME "jazz_esp" +#define PFX DRV_MODULE_NAME ": " +#define DRV_VERSION "1.000" +#define DRV_MODULE_RELDATE "May 19, 2007" -/************************************************************* DMA Functions */ -static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count) +static void jazz_esp_write8(struct esp *esp, u8 val, unsigned long reg) { - return fifo_count; + *(volatile u8 *)(esp->regs + reg) = val; } -static int dma_can_transfer(struct NCR_ESP *esp, struct scsi_cmnd *sp) +static u8 jazz_esp_read8(struct esp *esp, unsigned long reg) { - /* - * maximum DMA size is 1MB - */ - unsigned long sz = sp->SCp.this_residual; - if(sz > 0x100000) - sz = 0x100000; - return sz; + return *(volatile u8 *)(esp->regs + reg); } -static void dma_dump_state(struct NCR_ESP *esp) +static dma_addr_t jazz_esp_map_single(struct esp *esp, void *buf, + size_t sz, int dir) { - - ESPLOG(("esp%d: dma -- enable <%08x> residue <%08x\n", - esp->esp_id, vdma_get_enable((int)esp->dregs), vdma_get_residue((int)esp->dregs))); + return dma_map_single(esp->dev, buf, sz, dir); } -static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length) +static int jazz_esp_map_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length); - vdma_disable ((int)esp->dregs); - vdma_set_mode ((int)esp->dregs, DMA_MODE_READ); - vdma_set_addr ((int)esp->dregs, vaddress); - vdma_set_count ((int)esp->dregs, length); - vdma_enable ((int)esp->dregs); + return dma_map_sg(esp->dev, sg, num_sg, dir); } -static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length) +static void jazz_esp_unmap_single(struct esp *esp, dma_addr_t addr, + size_t sz, int dir) { - dma_cache_wback_inv ((unsigned long)phys_to_virt(vdma_log2phys(vaddress)), length); - vdma_disable ((int)esp->dregs); - vdma_set_mode ((int)esp->dregs, DMA_MODE_WRITE); - vdma_set_addr ((int)esp->dregs, vaddress); - vdma_set_count ((int)esp->dregs, length); - vdma_enable ((int)esp->dregs); + dma_unmap_single(esp->dev, addr, sz, dir); } -static void dma_ints_off(struct NCR_ESP *esp) +static void jazz_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) { - disable_irq(esp->irq); + dma_unmap_sg(esp->dev, sg, num_sg, dir); } -static void dma_ints_on(struct NCR_ESP *esp) +static int jazz_esp_irq_pending(struct esp *esp) { - enable_irq(esp->irq); + if (jazz_esp_read8(esp, ESP_STATUS) & ESP_STAT_INTR) + return 1; + return 0; } -static int dma_irq_p(struct NCR_ESP *esp) +static void jazz_esp_reset_dma(struct esp *esp) { - return (esp_read(esp->eregs->esp_status) & ESP_STAT_INTR); + vdma_disable ((int)esp->dma_regs); } -static int dma_ports_p(struct NCR_ESP *esp) +static void jazz_esp_dma_drain(struct esp *esp) { - int enable = vdma_get_enable((int)esp->dregs); - - return (enable & R4030_CHNL_ENABLE); + /* nothing to do */ } -static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write) +static void jazz_esp_dma_invalidate(struct esp *esp) { - /* - * On the Sparc, DMA_ST_WRITE means "move data from device to memory" - * so when (write) is true, it actually means READ! - */ - if(write){ - dma_init_read(esp, addr, count); - } else { - dma_init_write(esp, addr, count); - } + vdma_disable ((int)esp->dma_regs); } -static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp) +static void jazz_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, + u32 dma_count, int write, u8 cmd) { - sp->SCp.have_data_in = vdma_alloc(CPHYSADDR(sp->SCp.buffer), sp->SCp.this_residual); - sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in); + BUG_ON(!(cmd & ESP_CMD_DMA)); + + jazz_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); + jazz_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); + vdma_disable ((int)esp->dma_regs); + if (write) + vdma_set_mode ((int)esp->dma_regs, DMA_MODE_READ); + else + vdma_set_mode ((int)esp->dma_regs, DMA_MODE_WRITE); + + vdma_set_addr ((int)esp->dma_regs, addr); + vdma_set_count ((int)esp->dma_regs, dma_count); + vdma_enable ((int)esp->dma_regs); + + scsi_esp_cmd(esp, cmd); } -static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp) -{ - int sz = sp->SCp.buffers_residual; - struct scatterlist *sg = (struct scatterlist *) sp->SCp.buffer; - - while (sz >= 0) { - sg[sz].dma_address = vdma_alloc(CPHYSADDR(page_address(sg[sz].page) + sg[sz].offset), sg[sz].length); - sz--; - } - sp->SCp.ptr=(char *)(sp->SCp.buffer->dma_address); -} - -static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, struct scsi_cmnd *sp) +static int jazz_esp_dma_error(struct esp *esp) { - vdma_free(sp->SCp.have_data_in); + u32 enable = vdma_get_enable((int)esp->dma_regs); + + if (enable & (R4030_MEM_INTR|R4030_ADDR_INTR)) + return 1; + + return 0; } -static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, struct scsi_cmnd *sp) +static const struct esp_driver_ops jazz_esp_ops = { + .esp_write8 = jazz_esp_write8, + .esp_read8 = jazz_esp_read8, + .map_single = jazz_esp_map_single, + .map_sg = jazz_esp_map_sg, + .unmap_single = jazz_esp_unmap_single, + .unmap_sg = jazz_esp_unmap_sg, + .irq_pending = jazz_esp_irq_pending, + .reset_dma = jazz_esp_reset_dma, + .dma_drain = jazz_esp_dma_drain, + .dma_invalidate = jazz_esp_dma_invalidate, + .send_dma_cmd = jazz_esp_send_dma_cmd, + .dma_error = jazz_esp_dma_error, +}; + +static int __devinit esp_jazz_probe(struct platform_device *dev) { - int sz = sp->use_sg - 1; - struct scatterlist *sg = (struct scatterlist *)sp->request_buffer; - - while(sz >= 0) { - vdma_free(sg[sz].dma_address); - sz--; - } + struct scsi_host_template *tpnt = &scsi_esp_template; + struct Scsi_Host *host; + struct esp *esp; + struct resource *res; + int err; + + host = scsi_host_alloc(tpnt, sizeof(struct esp)); + + err = -ENOMEM; + if (!host) + goto fail; + + host->max_id = 8; + esp = host_to_esp(host); + + esp->host = host; + esp->dev = dev; + esp->ops = &jazz_esp_ops; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + goto fail_unlink; + + esp->regs = (void __iomem *)res->start; + if (!esp->regs) + goto fail_unlink; + + res = platform_get_resource(dev, IORESOURCE_MEM, 1); + if (!res) + goto fail_unlink; + + esp->dma_regs = (void __iomem *)res->start; + + esp->command_block = dma_alloc_coherent(esp->dev, 16, + &esp->command_block_dma, + GFP_KERNEL); + if (!esp->command_block) + goto fail_unmap_regs; + + host->irq = platform_get_irq(dev, 0); + err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp); + if (err < 0) + goto fail_unmap_command_block; + + esp->scsi_id = 7; + esp->host->this_id = esp->scsi_id; + esp->scsi_id_mask = (1 << esp->scsi_id); + esp->cfreq = 40000000; + + dev_set_drvdata(&dev->dev, esp); + + err = scsi_esp_register(esp, &dev->dev); + if (err) + goto fail_free_irq; + + return 0; + +fail_free_irq: + free_irq(host->irq, esp); +fail_unmap_command_block: + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); +fail_unmap_regs: +fail_unlink: + scsi_host_put(host); +fail: + return err; } -static void dma_advance_sg (struct scsi_cmnd *sp) +static int __devexit esp_jazz_remove(struct platform_device *dev) { - sp->SCp.ptr = (char *)(sp->SCp.buffer->dma_address); + struct esp *esp = dev_get_drvdata(&dev->dev); + unsigned int irq = esp->host->irq; + + scsi_esp_unregister(esp); + + free_irq(irq, esp); + dma_free_coherent(esp->dev, 16, + esp->command_block, + esp->command_block_dma); + + scsi_host_put(esp->host); + + return 0; } -#define JAZZ_HDC_LED 0xe000d100 /* FIXME, find correct address */ +static struct platform_driver esp_jazz_driver = { + .probe = esp_jazz_probe, + .remove = __devexit_p(esp_jazz_remove), + .driver = { + .name = "jazz_esp", + }, +}; -static void dma_led_off(struct NCR_ESP *esp) +static int __init jazz_esp_init(void) { -#if 0 - *(unsigned char *)JAZZ_HDC_LED = 0; -#endif + return platform_driver_register(&esp_jazz_driver); } -static void dma_led_on(struct NCR_ESP *esp) -{ -#if 0 - *(unsigned char *)JAZZ_HDC_LED = 1; -#endif +static void __exit jazz_esp_exit(void) +{ + platform_driver_unregister(&esp_jazz_driver); } -static struct scsi_host_template driver_template = { - .proc_name = "jazz_esp", - .proc_info = esp_proc_info, - .name = "ESP 100/100a/200", - .detect = jazz_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = jazz_esp_release, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" +MODULE_DESCRIPTION("JAZZ ESP SCSI driver"); +MODULE_AUTHOR("Thomas Bogendoerfer (tsbogend@alpha.franken.de)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(jazz_esp_init); +module_exit(jazz_esp_exit); -- cgit v1.2.3-18-g5258 From 89a4063e959a4701b998f3f1c3f8a6562ab5ba51 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 22 May 2007 23:48:10 -0700 Subject: [SCSI] ESP: Kill SCSI_ESP_CORE and link directly just like jazz_esp Signed-off-by: David S. Miller --- drivers/scsi/Kconfig | 14 -------------- drivers/scsi/Makefile | 3 +-- 2 files changed, 1 insertion(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d28c14e23c3..572034ceb14 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1753,23 +1753,9 @@ config SUN3X_ESP The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. -config SCSI_ESP_CORE - tristate "ESP Scsi Driver Core" - depends on SCSI - select SCSI_SPI_ATTRS - help - This is a core driver for NCR53c9x based scsi chipsets, - also known as "ESP" for Emulex Scsi Processor or - Enhanced Scsi Processor. This driver does not exist by - itself, there are front-end drivers which, when enabled, - select and enable this driver. One example is SCSI_SUNESP. - These front-end drivers provide probing, DMA, and register - access support for the core driver. - config SCSI_SUNESP tristate "Sparc ESP Scsi Driver" depends on SBUS && SCSI - select SCSI_ESP_CORE help This is the driver for the Sun ESP SCSI host adapter. The ESP chipset is present in most SPARC SBUS-based computers. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index fc05d90229a..b1b63279158 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -106,8 +106,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o -obj-$(CONFIG_SCSI_ESP_CORE) += esp_scsi.o -obj-$(CONFIG_SCSI_SUNESP) += sun_esp.o +obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o obj-$(CONFIG_SCSI_INITIO) += initio.o obj-$(CONFIG_SCSI_INIA100) += a100u2w.o -- cgit v1.2.3-18-g5258 From b00ccd0f0b3fe8776aead63ec96313e84451b337 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 27 May 2007 14:48:54 -0700 Subject: [SPARC]: Linux always started with 9600 8N1 The Linux kernel ignored the PROM's serial settings (115200,n,8,1 in my case). This was because mode_prop remained "ttyX-mode" (expected: "ttya-mode") due to the constness of string literals when used with "char *". Since there is no "ttyX-mode" property in the PROM, Linux always used the default 9600. [ Investigation of the suncore.s assembler reveals that gcc optimizied away the stores, yet did not emit a warning, which is a pretty anti-social thing to do and is the only reason this bug lived for so long -DaveM ] Signed-off-by: Jan Engelhardt Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index e35d9ab359f..b45ba5392dd 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -30,9 +30,9 @@ void sunserial_console_termios(struct console *con) { char mode[16], buf[16], *s; - char *mode_prop = "ttyX-mode"; - char *cd_prop = "ttyX-ignore-cd"; - char *dtr_prop = "ttyX-rts-dtr-off"; + char mode_prop[] = "ttyX-mode"; + char cd_prop[] = "ttyX-ignore-cd"; + char dtr_prop[] = "ttyX-rts-dtr-off"; char *ssp_console_modes_prop = "ssp-console-modes"; int baud, bits, stop, cflag; char parity; -- cgit v1.2.3-18-g5258 From 5f81941c9d47f783e834028dcfb8548809da5a53 Mon Sep 17 00:00:00 2001 From: Martin Habets Date: Tue, 29 May 2007 01:11:57 -0700 Subject: [SPARC]: Mark as emulating cmpxchg, add appropriate depends for DRM. The DRM code depends on an atomic version of cmpxchg(), which is not available on sparc32. Since other platforms besides sparc32 have this issue a KCONFIG option is added for it. Signed-off-by: Martin Habets Signed-off-by: David S. Miller --- drivers/char/drm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index ef833a1c27e..0b7ffa5191c 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -6,7 +6,7 @@ # config DRM tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" - depends on (AGP || AGP=n) && PCI + depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select -- cgit v1.2.3-18-g5258