From 63a14ce449dd6d647de2725809159eb072b2c44f Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 2 Nov 2009 14:30:40 +0000 Subject: tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flag Broadcom 50610M parts changed the default definitions of the RGMII mode shadow register. The 5785 needs the RGMII mode selection bits [4:3] cleared. The default value of the remaining bits in this register are zero. Rather than unnecessarily burn an extra bit in the dev_flags member in an attempt to enumerate all possible combinations, this patch take a more course grained approach and labels the option as "clear all bits". Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 6 ++++++ drivers/net/tg3.c | 1 + 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index ace0ccc87a0..5d2a2e90aba 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -105,6 +105,7 @@ #define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) /* LED1 / ~LINKSPD[1] selector */ #define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ #define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ #define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ #define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ @@ -330,6 +331,11 @@ static int bcm54xx_config_init(struct phy_device *phydev) if (err < 0) return err; + if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) && + (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) + bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0); + bcm54xx_phydsp_config(phydev); return 0; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0aecd07d3f6..e7128f6ae2d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1100,6 +1100,7 @@ static int tg3_mdio_init(struct tg3 *tp) break; case TG3_PHY_ID_BCM50610: case TG3_PHY_ID_BCM50610M: + phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE; if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE) phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE; if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN) -- cgit v1.2.3-18-g5258