From d535bad90dad4eb42ec6528043fcfb53627d4f89 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 9 Jul 2010 16:22:47 +0200 Subject: hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek Signed-off-by: Andreas Herrmann Signed-off-by: Jean Delvare --- drivers/hwmon/k8temp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c index f26acdb1168..8bdf80d9159 100644 --- a/drivers/hwmon/k8temp.c +++ b/drivers/hwmon/k8temp.c @@ -180,11 +180,13 @@ static int __devinit k8temp_probe(struct pci_dev *pdev, } if ((model >= 0x69) && - !(model == 0xc1 || model == 0x6c || model == 0x7c)) { + !(model == 0xc1 || model == 0x6c || model == 0x7c || + model == 0x6b || model == 0x6f || model == 0x7f)) { /* - * RevG desktop CPUs (i.e. no socket S1G1 parts) - * need additional offset, otherwise reported - * temperature is below ambient temperature + * RevG desktop CPUs (i.e. no socket S1G1 or + * ASB1 parts) need additional offset, + * otherwise reported temperature is below + * ambient temperature */ data->temp_offset = 21000; } -- cgit v1.2.3-18-g5258 From 436cad2a41a40c6c32bd9152b63d17eeb1f7c99b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 9 Jul 2010 16:22:48 +0200 Subject: hwmon: (it87) Fix in7 on IT8720F The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare Cc: Jean-Marc Spaggiari Cc: stable@kernel.org --- drivers/hwmon/it87.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 5be09c048c5..25763d2223b 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -80,6 +80,13 @@ superio_inb(int reg) return inb(VAL); } +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + static int superio_inw(int reg) { int val; @@ -1517,6 +1524,21 @@ static int __init it87_find(unsigned short *address, sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); + /* + * The IT8720F has no VIN7 pin, so VCCH should always be + * routed internally to VIN7 with an internal divider. + * Curiously, there still is a configuration bit to control + * this, which means it can be set incorrectly. And even + * more curiously, many boards out there are improperly + * configured, even though the IT8720F datasheet claims + * that the internal routing of VCCH to VIN7 is the default + * setting. So we force the internal routing in this case. + */ + if (sio_data->type == it8720 && !(reg & (1 << 1))) { + reg |= (1 << 1); + superio_outb(IT87_SIO_PINX2_REG, reg); + pr_notice("it87: Routing internal VCCH to in7\n"); + } if (reg & (1 << 0)) pr_info("it87: in3 is VCC (+5V)\n"); if (reg & (1 << 1)) -- cgit v1.2.3-18-g5258 From d883b9f0977269d519469da72faec6a7f72cb489 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 9 Jul 2010 16:22:49 +0200 Subject: hwmon: (coretemp) Skip duplicate CPU entries On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by: Jean Delvare Acked-by: Huaxu Wan Cc: stable@kernel.org --- drivers/hwmon/coretemp.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 2988da150ed..3b168faee79 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -405,6 +405,10 @@ struct pdev_entry { struct list_head list; struct platform_device *pdev; unsigned int cpu; +#ifdef CONFIG_SMP + u16 phys_proc_id; + u16 cpu_core_id; +#endif }; static LIST_HEAD(pdev_list); @@ -415,6 +419,22 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) int err; struct platform_device *pdev; struct pdev_entry *pdev_entry; +#ifdef CONFIG_SMP + struct cpuinfo_x86 *c = &cpu_data(cpu); +#endif + + mutex_lock(&pdev_list_mutex); + +#ifdef CONFIG_SMP + /* Skip second HT entry of each core */ + list_for_each_entry(pdev_entry, &pdev_list, list) { + if (c->phys_proc_id == pdev_entry->phys_proc_id && + c->cpu_core_id == pdev_entry->cpu_core_id) { + err = 0; /* Not an error */ + goto exit; + } + } +#endif pdev = platform_device_alloc(DRVNAME, cpu); if (!pdev) { @@ -438,7 +458,10 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) pdev_entry->pdev = pdev; pdev_entry->cpu = cpu; - mutex_lock(&pdev_list_mutex); +#ifdef CONFIG_SMP + pdev_entry->phys_proc_id = c->phys_proc_id; + pdev_entry->cpu_core_id = c->cpu_core_id; +#endif list_add_tail(&pdev_entry->list, &pdev_list); mutex_unlock(&pdev_list_mutex); @@ -449,6 +472,7 @@ exit_device_free: exit_device_put: platform_device_put(pdev); exit: + mutex_unlock(&pdev_list_mutex); return err; } -- cgit v1.2.3-18-g5258 From 3f4f09b4be35d38d6e2bf22c989443e65e70fc4c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 9 Jul 2010 16:22:51 +0200 Subject: hwmon: (coretemp) Properly label the sensors Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by: Jean Delvare Acked-by: Huaxu Wan Cc: stable@kernel.org --- drivers/hwmon/coretemp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 3b168faee79..05344af5073 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -53,6 +53,7 @@ struct coretemp_data { struct mutex update_lock; const char *name; u32 id; + u16 core_id; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ int temp; @@ -75,7 +76,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute if (attr->index == SHOW_NAME) ret = sprintf(buf, "%s\n", data->name); else /* show label */ - ret = sprintf(buf, "Core %d\n", data->id); + ret = sprintf(buf, "Core %d\n", data->core_id); return ret; } @@ -304,6 +305,9 @@ static int __devinit coretemp_probe(struct platform_device *pdev) } data->id = pdev->id; +#ifdef CONFIG_SMP + data->core_id = c->cpu_core_id; +#endif data->name = "coretemp"; mutex_init(&data->update_lock); -- cgit v1.2.3-18-g5258 From faabd47f7e3a36574abcdff0b3506abb092bbe24 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 9 Jul 2010 16:22:51 +0200 Subject: hwmon: Fix autoloading of fschmd on recent Fujitsu machines Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare Tested-by: Sergey Spiridonov Cc: Hans de Goede --- drivers/i2c/busses/i2c-i801.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index f4b21f2bb8e..c60081169cc 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -655,7 +655,7 @@ static void __devinit dmi_check_onboard_device(u8 type, const char *name, /* & ~0x80, ignore enabled/disabled bit */ if ((type & ~0x80) != dmi_devices[i].type) continue; - if (strcmp(name, dmi_devices[i].name)) + if (strcasecmp(name, dmi_devices[i].name)) continue; memset(&info, 0, sizeof(struct i2c_board_info)); @@ -704,9 +704,6 @@ static int __devinit i801_probe(struct pci_dev *dev, { unsigned char temp; int err, i; -#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE - const char *vendor; -#endif I801_dev = dev; i801_features = 0; @@ -808,8 +805,7 @@ static int __devinit i801_probe(struct pci_dev *dev, } #endif #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE - vendor = dmi_get_system_info(DMI_BOARD_VENDOR); - if (vendor && !strcmp(vendor, "FUJITSU SIEMENS")) + if (dmi_name_in_vendors("FUJITSU")) dmi_walk(dmi_check_onboard_devices, &i801_adapter); #endif -- cgit v1.2.3-18-g5258