From 567c89032cfdda8047562abe450947ac01f2d3c7 Mon Sep 17 00:00:00 2001 From: Johan Rudholm Date: Mon, 28 Jan 2013 15:08:27 +0100 Subject: mmc: core: Break out start_signal_voltage_switch Allow callers to access the start_signal_voltage_switch host_ops member without going through any cmd11 logic. This is mostly a preparation for the following signal voltage switch patch. Also, reset ios.signal_voltage to its original value if start_signal_voltage_switch fails. Signed-off-by: Johan Rudholm Acked-by: Ulf Hansson Tested-by: Wei WANG Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 35 +++++++++++++++++++++++------------ drivers/mmc/core/core.h | 4 ++-- drivers/mmc/core/mmc.c | 8 ++++---- drivers/mmc/core/sd.c | 2 +- drivers/mmc/core/sdio.c | 3 +-- 5 files changed, 31 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 789056fbfc9..bb794c78459 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1317,7 +1317,26 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) return ocr; } -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11) +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) +{ + int err = 0; + int old_signal_voltage = host->ios.signal_voltage; + + host->ios.signal_voltage = signal_voltage; + if (host->ops->start_signal_voltage_switch) { + mmc_host_clk_hold(host); + err = host->ops->start_signal_voltage_switch(host, &host->ios); + mmc_host_clk_release(host); + } + + if (err) + host->ios.signal_voltage = old_signal_voltage; + + return err; + +} + +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) { struct mmc_command cmd = {0}; int err = 0; @@ -1328,7 +1347,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11 * Send CMD11 only if the request is to switch the card to * 1.8V signalling. */ - if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) { + if (signal_voltage != MMC_SIGNAL_VOLTAGE_330) { cmd.opcode = SD_SWITCH_VOLTAGE; cmd.arg = 0; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; @@ -1341,15 +1360,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11 return -EIO; } - host->ios.signal_voltage = signal_voltage; - - if (host->ops->start_signal_voltage_switch) { - mmc_host_clk_hold(host); - err = host->ops->start_signal_voltage_switch(host, &host->ios); - mmc_host_clk_release(host); - } - - return err; + return __mmc_set_signal_voltage(host, signal_voltage); } /* @@ -1412,7 +1423,7 @@ static void mmc_power_up(struct mmc_host *host) mmc_set_ios(host); /* Set signal voltage to 3.3V */ - mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false); + __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330); /* * This delay should be sufficient to allow the power supply diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 9007de74d8a..b9f18a2a887 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -40,8 +40,8 @@ void mmc_set_ungated(struct mmc_host *host); void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); void mmc_set_bus_width(struct mmc_host *host, unsigned int width); u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); -int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, - bool cmd11); +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); +int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); void mmc_set_timing(struct mmc_host *host, unsigned int timing); void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); void mmc_power_off(struct mmc_host *host); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 0d7a9795a6d..8a3ad602a87 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -769,11 +769,11 @@ static int mmc_select_hs200(struct mmc_card *card) if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && host->caps2 & MMC_CAP2_HS200_1_2V_SDR) - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0); + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V && host->caps2 & MMC_CAP2_HS200_1_8V_SDR) - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0); + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); /* If fails try again during next card power cycle */ if (err) @@ -1221,8 +1221,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * WARNING: eMMC rules are NOT the same as SD DDR */ if (ddr == MMC_1_2V_DDR_MODE) { - err = mmc_set_signal_voltage(host, - MMC_SIGNAL_VOLTAGE_120, 0); + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); if (err) goto err; } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 93736394807..9a59fcd55a7 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -757,7 +757,7 @@ try_again: */ if (!mmc_host_is_spi(host) && rocr && ((*rocr & 0x41000000) == 0x41000000)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true); + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); if (err) { ocr &= ~SD_OCR_S18R; goto try_again; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 3a64933466b..1a726aef211 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -647,8 +647,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, * it. */ if ((ocr & R4_18V_PRESENT) && mmc_host_uhs(host)) { - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - true); + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); if (err) { ocr &= ~R4_18V_PRESENT; host->ocr &= ~R4_18V_PRESENT; -- cgit v1.2.3-18-g5258