From 6c7ee8905d54e66d01902c59490bbc99d87d4efb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Jun 2014 12:32:33 +0300 Subject: clk: ti: apll: not allocating enough data There is a cut and paste bug here which will lead to memory corruption because we don't allocate enough data. Fixes: 4d008589e271 ('CLK: TI: APLL: add support for omap2 aplls') Signed-off-by: Dan Carpenter Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 5428c9c547c..18dbaf128a3 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -338,7 +338,7 @@ static void __init of_omap2_apll_setup(struct device_node *node) const char *parent_name; u32 val; - ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + ad = kzalloc(sizeof(*ad), GFP_KERNEL); clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); init = kzalloc(sizeof(*init), GFP_KERNEL); -- cgit v1.2.3-18-g5258 From 8d2f9e8eca807479c83c8f765b6859838da618eb Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 19 May 2014 19:25:48 +0800 Subject: clk: ti: dra7: return error code in failure case Add a returned error code in the MAX_APLL_WAIT_TRIES case. Remove the updating of the return variable r to 0 if MAX_APLL_WAIT_TRIES is not yet reached, because r is already 0 at this point. Signed-off-by: Julia Lawall Signed-off-by: Tero Kristo --- drivers/clk/ti/apll.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index 18dbaf128a3..72d97279eae 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -77,13 +77,11 @@ static int dra7_apll_enable(struct clk_hw *hw) if (i == MAX_APLL_WAIT_TRIES) { pr_warn("clock: %s failed transition to '%s'\n", clk_name, (state) ? "locked" : "bypassed"); - } else { + r = -EBUSY; + } else pr_debug("clock: %s transition to '%s' in %d loops\n", clk_name, (state) ? "locked" : "bypassed", i); - r = 0; - } - return r; } -- cgit v1.2.3-18-g5258 From 32cff42d0dc4fa5f474eff0980829537c520df5d Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Reported-by: Tony Lindgren Signed-off-by: Tero Kristo --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f83..79791e1bf28 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3-18-g5258 From 7d5fc85d961b807c799786afd175f5d964a2109f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jun 2014 11:04:32 +0300 Subject: clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock When setting the rate of a clock, by default the clock framework will change the parent of the clock to the most suitable one in __clk_mux_determine_rate() (most suitable by looking at the clock rate). This is a rather dangerous default, and causes problems on AM43x when using display and ethernet. There are multiple ways to select the clock muxes on AM43x, and some of those clock paths have the same source clocks for display and ethernet. When changing the clock rate for the display subsystem, the clock framework decides to change the display mux from the dedicated display PLL to a shared PLL which is used by the ethernet, and then changes the rate of the shared PLL, breaking the ethernet. As I don't think there ever is a case where we want the clock framework to automatically change the parent clock of a clock mux, this patch sets the CLK_SET_RATE_NO_REPARENT for all ti,mux-clocks. Signed-off-by: Tomi Valkeinen Reviewed-by: Paul Walmsley Tested-by: Felipe Balbi Signed-off-by: Tero Kristo --- drivers/clk/ti/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 0197a478720..e9d650e5128 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -160,7 +160,7 @@ static void of_mux_clk_setup(struct device_node *node) u8 clk_mux_flags = 0; u32 mask = 0; u32 shift = 0; - u32 flags = 0; + u32 flags = CLK_SET_RATE_NO_REPARENT; num_parents = of_clk_get_parent_count(node); if (num_parents < 2) { -- cgit v1.2.3-18-g5258 From cec1cdea6f6d9fadf5f14fa80754d4a066ca76e0 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:09 +0300 Subject: clk: samsung: fix several typos to fix boot on s3c2410 There's a several typos in a driver: 2410 instead of S3C2410 and wrong argument to ARRAY_SIZE(). They prevent s3c2410 from properly booting. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index ba0716801db..bd9a873da09 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -378,7 +378,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, if (!np) s3c2410_common_clk_register_fixed_ext(ctx, xti_f); - if (current_soc == 2410) { + if (current_soc == S3C2410) { if (_get_rate("xti") == 12 * MHZ) { s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; @@ -432,7 +432,7 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor, ARRAY_SIZE(s3c2410_ffactor)); samsung_clk_register_alias(ctx, s3c2410_aliases, - ARRAY_SIZE(s3c2410_common_aliases)); + ARRAY_SIZE(s3c2410_aliases)); break; case S3C2440: samsung_clk_register_mux(ctx, s3c2440_muxes, -- cgit v1.2.3-18-g5258 From 34ece9e610682f34776136cba7b4600ea5d8fd94 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 23 Jun 2014 23:29:10 +0300 Subject: clk: samsung: add more aliases for s3c24xx Without these aliases clock lookup fails in s3c2410fb, s3cmci, s3c2410-nand, s3c24xx-i2s, and i2c-s3c2410 drivers. Signed-off-by: Vasily Khoruzhick Reviewed-by: Heiko Stuebner Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c2410.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c index bd9a873da09..140f4733c02 100644 --- a/drivers/clk/samsung/clk-s3c2410.c +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -152,6 +152,11 @@ struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { ALIAS(HCLK, NULL, "hclk"), ALIAS(MPLL, NULL, "mpll"), ALIAS(FCLK, NULL, "fclk"), + ALIAS(PCLK, NULL, "watchdog"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_NAND, NULL, "nand"), + ALIAS(PCLK_I2S, NULL, "iis"), + ALIAS(PCLK_I2C, NULL, "i2c"), }; /* S3C2410 specific clocks */ -- cgit v1.2.3-18-g5258 From a37c82a3b3c0910019abfd22a97be1fdf11ae3e5 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Tue, 24 Jun 2014 15:57:12 +0200 Subject: clk: samsung: exynos4: Remove SRC_MASK_ISP gates ISP special clocks have dedicated gating registers and so MUX SRC_MASK register should not be used. This patch fixes the problem of Exynos4x12-based boards freezing on system suspend, because those mux outputs need not to be masked while suspending. Signed-off-by: Tomasz Figa Cc: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index 4f150c9dd38..7f4a473a7ad 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -925,21 +925,13 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0), GATE(CLK_KEYIF, "keyif", "aclk100", E4X12_GATE_IP_PERIR, 16, 0, 0), - GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "div_pwm_isp", - E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp_pre", - E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp_pre", - E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0), - GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp", - E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0), - GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "sclk_pwm_isp", + GATE(CLK_PWM_ISP_SCLK, "pwm_isp_sclk", "div_pwm_isp", E4X12_GATE_IP_ISP, 0, 0, 0), - GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "sclk_spi0_isp", + GATE(CLK_SPI0_ISP_SCLK, "spi0_isp_sclk", "div_spi0_isp_pre", E4X12_GATE_IP_ISP, 1, 0, 0), - GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "sclk_spi1_isp", + GATE(CLK_SPI1_ISP_SCLK, "spi1_isp_sclk", "div_spi1_isp_pre", E4X12_GATE_IP_ISP, 2, 0, 0), - GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "sclk_uart_isp", + GATE(CLK_UART_ISP_SCLK, "uart_isp_sclk", "div_uart_isp", E4X12_GATE_IP_ISP, 3, 0, 0), GATE(CLK_WDT, "watchdog", "aclk100", E4X12_GATE_IP_PERIR, 14, 0, 0), GATE(CLK_PCM0, "pcm0", "aclk100", E4X12_GATE_IP_MAUDIO, 2, -- cgit v1.2.3-18-g5258 From a92dda4bfad338b48c6190b1da70fe7f0eefc55d Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 18 Jun 2014 10:52:23 +0100 Subject: clk: s3c64xx: Hookup SPI clocks correctly In the move to this clock driver the hookups for the SPI clocks were dropped, which causes my system Cragganmore (s3c6410 based) to be unable to locate any spibus clocks. This patch adds them back in. When taking the clock from the epll clock (SCLK) the rates on the SPI bus are incorrect, this needs further debugging but the hookup here should be correct and the problem should be else where. The USBCLK case has been dropped because this requires the USB PHY to be enabled. Signed-off-by: Charles Keepax Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-s3c64xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c index efa16ee592c..8889ff1c10f 100644 --- a/drivers/clk/samsung/clk-s3c64xx.c +++ b/drivers/clk/samsung/clk-s3c64xx.c @@ -418,8 +418,10 @@ static struct samsung_clock_alias s3c64xx_clock_aliases[] = { ALIAS(SCLK_MMC2, "s3c-sdhci.2", "mmc_busclk.2"), ALIAS(SCLK_MMC1, "s3c-sdhci.1", "mmc_busclk.2"), ALIAS(SCLK_MMC0, "s3c-sdhci.0", "mmc_busclk.2"), - ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi-bus"), - ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi-bus"), + ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi_busclk0"), + ALIAS(SCLK_SPI1, "s3c6410-spi.1", "spi_busclk2"), + ALIAS(PCLK_SPI0, "s3c6410-spi.0", "spi_busclk0"), + ALIAS(SCLK_SPI0, "s3c6410-spi.0", "spi_busclk2"), ALIAS(SCLK_AUDIO1, "samsung-pcm.1", "audio-bus"), ALIAS(SCLK_AUDIO1, "samsung-i2s.1", "audio-bus"), ALIAS(SCLK_AUDIO0, "samsung-pcm.0", "audio-bus"), -- cgit v1.2.3-18-g5258 From 0b1643b39ddae68f1b1b5ed848c8268a004a60a9 Mon Sep 17 00:00:00 2001 From: Rahul Sharma Date: Thu, 19 Jun 2014 11:17:16 +0530 Subject: clk/exynos5250: fix bit number for tv sysmmu clock Change bit from 2 to 9 for tv (mixer) sysmmu clock. Signed-off-by: Rahul Sharma Reviewed-by: Sachin Kamat Acked-by: Kukjin Kim Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 1fad4c5e3f5..184f64293b2 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -661,7 +661,7 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0), GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0), GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub", - GATE_IP_DISP1, 2, 0, 0), + GATE_IP_DISP1, 9, 0, 0), GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub", GATE_IP_DISP1, 8, 0, 0), GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0), -- cgit v1.2.3-18-g5258 From 44ff0254b89079a8a95e652635e760d93196ac1f Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 5 Jun 2014 13:35:14 -0700 Subject: clk: exynos5420: Remove aclk66_peric from the clock tree description The "aclk66_peric" clock is a gate clock with a whole bunch of gates underneath it. This big gate isn't very useful to include in our clock tree. If any of the children need to be turned on then the big gate will need to be on anyway. ...and there are plenty of other "big gates" that aren't described in our clock tree, some of which shut off collections of clocks that have no relationship in the hierarchy so are hard to model. "aclk66_peric" is causing earlyprintk problems since it gets disabled as part of the boot process, so let's just remove it. Strangely (and for no good reason) this clock is exported as part of the common clock bindings. Remove it since there are no in-kernel device trees using it and no reason anyone out of tree should refer to it either. Signed-off-by: Doug Anderson Signed-off-by: Tomasz Figa --- drivers/clk/samsung/clk-exynos5420.c | 85 +++++++++++++++++++++++------------- 1 file changed, 55 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 9d7d7eed03f..61eccf0dd72 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen", GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), - GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric", - GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk266_isp", "mout_user_aclk266_isp", GATE_BUS_TOP, 13, 0, 0), GATE(0, "aclk166", "mout_user_aclk166", @@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = { SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), /* PERIC Block */ - GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0), - GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0), - GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0), - GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0), - GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0), - GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0), - GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0), - GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0), - GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0), - GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0), - GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0), - GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0), - GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0), - GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0), - GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0), - GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0), - GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0), - GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0), - GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0), - GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0), - GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0), - GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0), - GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0), - GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0), - GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0), - GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0), - - GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0), + GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 0, 0, 0), + GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 1, 0, 0), + GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 2, 0, 0), + GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 3, 0, 0), + GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 6, 0, 0), + GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 7, 0, 0), + GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 8, 0, 0), + GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 9, 0, 0), + GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 10, 0, 0), + GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 11, 0, 0), + GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 12, 0, 0), + GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric", + GATE_IP_PERIC, 13, 0, 0), + GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric", + GATE_IP_PERIC, 14, 0, 0), + GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric", + GATE_IP_PERIC, 15, 0, 0), + GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric", + GATE_IP_PERIC, 16, 0, 0), + GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 17, 0, 0), + GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 18, 0, 0), + GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 20, 0, 0), + GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 21, 0, 0), + GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric", + GATE_IP_PERIC, 22, 0, 0), + GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric", + GATE_IP_PERIC, 23, 0, 0), + GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric", + GATE_IP_PERIC, 24, 0, 0), + GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric", + GATE_IP_PERIC, 26, 0, 0), + GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric", + GATE_IP_PERIC, 28, 0, 0), + GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric", + GATE_IP_PERIC, 30, 0, 0), + GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric", + GATE_IP_PERIC, 31, 0, 0), + + GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric", + GATE_BUS_PERIC, 22, 0, 0), /* PERIS Block */ GATE(CLK_CHIPID, "chipid", "aclk66_psgen", -- cgit v1.2.3-18-g5258 From 4332ec1a99510943e50acbe03d6c023d5e327093 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 17 Jun 2014 17:03:24 +0300 Subject: clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.192752] [] (show_stack) from [] (dump_stack+0x80/0x9c) [ 2.200486] [] (dump_stack) from [] (Ldiv0+0x8/0x10) [ 2.207678] [] (Ldiv0) from [] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [] (gpmc_calc_divider) from [] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [] (gpmc_cs_set_timings) from [] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [] (gpmc_nand_init) from [] (gpmc_probe+0x52c/0x874) [ 2.242089] [] (gpmc_probe) from [] (platform_drv_probe+0x18/0x48) [ 2.250534] [] (platform_drv_probe) from [] (driver_probe_device+0x104/0x22c) [ 2.259988] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [] (bus_for_each_drv) from [] (device_attach+0x74/0x8c) [ 2.277620] [] (device_attach) from [] (bus_probe_device+0x88/0xb0) [ 2.286074] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [] (deferred_probe_work_func) from [] (process_one_work+0x1b4/0x4bc) [ 2.305288] [] (process_one_work) from [] (worker_thread+0x148/0x550) [ 2.313954] [] (worker_thread) from [] (kthread+0xc8/0xe4) [ 2.321628] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros Signed-off-by: Mike Turquette --- drivers/clk/ti/dpll.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index abd956d5f83..79791e1bf28 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -161,7 +161,8 @@ cleanup: } #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) /** * ti_clk_register_dpll_x2 - Registers a DPLLx2 clock * @node: device node for this clock @@ -322,7 +323,7 @@ CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", of_ti_omap4_dpll_x2_setup); #endif -#ifdef CONFIG_SOC_AM33XX +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) { ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL); -- cgit v1.2.3-18-g5258 From 2a96dfa49c83a2a7cbdb11382976aaa6b2636764 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 27 Jun 2014 14:21:10 +0200 Subject: clk: s2mps11: Fix double free corruption during driver unbind After unbinding the driver memory was corrupted by double free of clk_lookup structure. This lead to OOPS when re-binding the driver again. The driver allocated memory for 'clk_lookup' with devm_kzalloc. During driver removal this memory was freed twice: once by clkdev_drop() and second by devm code. Kernel panic log: [ 30.839284] Unable to handle kernel paging request at virtual address 5f343173 [ 30.846476] pgd = dee14000 [ 30.849165] [5f343173] *pgd=00000000 [ 30.852703] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 30.858166] Modules linked in: [ 30.861208] CPU: 0 PID: 1 Comm: bash Not tainted 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 30.869364] task: df478000 ti: df480000 task.ti: df480000 [ 30.874752] PC is at clkdev_add+0x2c/0x38 [ 30.878738] LR is at clkdev_add+0x18/0x38 [ 30.882732] pc : [] lr : [] psr: 60000013 [ 30.882732] sp : df481e78 ip : 00000001 fp : c0700ed8 [ 30.894187] r10: 0000000c r9 : 00000000 r8 : c07b0e3c [ 30.899396] r7 : 00000002 r6 : df45f9d0 r5 : df421390 r4 : c0700d6c [ 30.905906] r3 : 5f343173 r2 : c0700d84 r1 : 60000013 r0 : c0700d6c [ 30.912417] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 30.919534] Control: 10c53c7d Table: 5ee1406a DAC: 00000015 [ 30.925262] Process bash (pid: 1, stack limit = 0xdf480240) [ 30.930817] Stack: (0xdf481e78 to 0xdf482000) [ 30.935159] 1e60: 00001000 df6de610 [ 30.943321] 1e80: df7f4558 c0355650 c05ec6ec c0700eb0 df6de600 df7f4510 dec9d69c 00000014 [ 30.951480] 1ea0: 00167b48 df6de610 c0700e30 c0713518 00000000 c0700e30 dec9d69c 00000006 [ 30.959639] 1ec0: 00167b48 c02c1b7c c02c1b64 df6de610 c07aff48 c02c0420 c06fb150 c047cc20 [ 30.967798] 1ee0: df6de610 df6de610 c0700e30 df6de644 c06fb150 0000000c dec9d690 c02bef90 [ 30.975957] 1f00: dec9c6c0 dece4c00 df481f80 dece4c00 0000000c c02be73c 0000000c c016ca8c [ 30.984116] 1f20: c016ca48 00000000 00000000 c016c1f4 00000000 00000000 b6f18000 df481f80 [ 30.992276] 1f40: df7f66c0 0000000c df480000 df480000 b6f18000 c011094c df47839c 60000013 [ 31.000435] 1f60: 00000000 00000000 df7f66c0 df7f66c0 0000000c df480000 b6f18000 c0110dd4 [ 31.008594] 1f80: 00000000 00000000 0000000c b6ec05d8 0000000c b6f18000 00000004 c000f2a8 [ 31.016753] 1fa0: 00001000 c000f0e0 b6ec05d8 0000000c 00000001 b6f18000 0000000c 00000000 [ 31.024912] 1fc0: b6ec05d8 0000000c b6f18000 00000004 0000000c 00000001 00000000 00167b48 [ 31.033071] 1fe0: 00000000 bed83a80 b6e004f0 b6e5122c 60000010 00000001 ffffffff ffffffff [ 31.041248] [] (clkdev_add) from [] (s2mps11_clk_probe+0x2b4/0x3b4) [ 31.049223] [] (s2mps11_clk_probe) from [] (platform_drv_probe+0x18/0x48) [ 31.057728] [] (platform_drv_probe) from [] (driver_probe_device+0x13c/0x384) [ 31.066579] [] (driver_probe_device) from [] (bind_store+0x88/0xd8) [ 31.074564] [] (bind_store) from [] (drv_attr_store+0x20/0x2c) [ 31.082118] [] (drv_attr_store) from [] (sysfs_kf_write+0x44/0x48) [ 31.090016] [] (sysfs_kf_write) from [] (kernfs_fop_write+0xc0/0x17c) [ 31.098176] [] (kernfs_fop_write) from [] (vfs_write+0xa0/0x1c4) [ 31.105899] [] (vfs_write) from [] (SyS_write+0x40/0x8c) [ 31.112931] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x3c) [ 31.120481] Code: e2842018 e584501c e1a00004 e885000c (e5835000) [ 31.126596] ---[ end trace efad45bfa3a61b05 ]--- [ 31.131181] Kernel panic - not syncing: Fatal exception [ 31.136368] CPU1: stopping [ 31.139054] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 31.148697] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 31.156419] [] (show_stack) from [] (dump_stack+0x80/0xcc) [ 31.163622] [] (dump_stack) from [] (handle_IPI+0x130/0x15c) [ 31.170998] [] (handle_IPI) from [] (gic_handle_irq+0x60/0x68) [ 31.178549] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x70) [ 31.186009] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 31.191046] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 31.199207] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 31.207363] dfc0: c0010324 c0010328 60000013 ffffffff [ 31.212402] [] (__irq_svc) from [] (arch_cpu_idle+0x28/0x30) [ 31.219783] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x2c4/0x3f0) [ 31.228027] [] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 31.234968] ---[ end Kernel panic - not syncing: Fatal exception Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Yadwinder Singh Brar Signed-off-by: Mike Turquette --- drivers/clk/clk-s2mps11.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index 9b7b5859a42..3757e9e72d3 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -230,16 +230,13 @@ static int s2mps11_clk_probe(struct platform_device *pdev) goto err_reg; } - s2mps11_clk->lookup = devm_kzalloc(&pdev->dev, - sizeof(struct clk_lookup), GFP_KERNEL); + s2mps11_clk->lookup = clkdev_alloc(s2mps11_clk->clk, + s2mps11_name(s2mps11_clk), NULL); if (!s2mps11_clk->lookup) { ret = -ENOMEM; goto err_lup; } - s2mps11_clk->lookup->con_id = s2mps11_name(s2mps11_clk); - s2mps11_clk->lookup->clk = s2mps11_clk->clk; - clkdev_add(s2mps11_clk->lookup); } -- cgit v1.2.3-18-g5258 From c3dcac875e35c2e67ccaef10ef62ae5b1410d29c Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Sat, 28 Jun 2014 22:53:55 +0530 Subject: clk: sunxi: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // Signed-off-by: Himangi Saraogi Acked-by: Julia Lawall Acked-by Boris BREZILLON Signed-off-by: Mike Turquette --- drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index 44cd27c5c40..670f90d629d 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -29,7 +29,7 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = devm_ioremap_resource(&pdev->dev, r); - if (!reg) + if (IS_ERR(reg)) return PTR_ERR(reg); clk_parent = of_clk_get_parent_name(np, 0); -- cgit v1.2.3-18-g5258 From c556bcddc78096caeb46dbe3ad0314dd951f1665 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 25 Jun 2014 14:44:19 -0700 Subject: clk: qcom: HDMI source sel is 3 not 2 The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL. Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Reported-by: Rob Clark Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- drivers/clk/qcom/mmcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 12f3c0b64fc..4c449b3170f 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -1209,7 +1209,7 @@ static struct clk_branch rot_clk = { static u8 mmcc_pxo_hdmi_map[] = { [P_PXO] = 0, - [P_HDMI_PLL] = 2, + [P_HDMI_PLL] = 3, }; static const char *mmcc_pxo_hdmi[] = { -- cgit v1.2.3-18-g5258 From 15ebb05248d025534773c9ef64915bd888f04e4b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:23 +0000 Subject: clk: spear3xx: Use proper control register offset The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index c2d20431554..125eba86c84 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -211,7 +211,7 @@ static inline void spear310_clk_init(void) { } /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 -#define SPEAR320_CONTROL_REG (soc_config_base + 0x0000) +#define SPEAR320_CONTROL_REG (soc_config_base + 0x0010) #define SPEAR320_EXT_CTRL_REG (soc_config_base + 0x0018) #define SPEAR320_UARTX_PCLK_MASK 0x1 -- cgit v1.2.3-18-g5258 From 449437778bd09b73a5e51554f7219706da08917f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 19 Jun 2014 21:52:24 +0000 Subject: clk: spear3xx: Set proper clock parent of uart1/2 The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner Acked-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/spear/spear3xx_clock.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index 125eba86c84..bb5f387774e 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -245,7 +245,8 @@ static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", "ras_syn0_gclk", }; static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", }; -static void __init spear320_clk_init(void __iomem *soc_config_base) +static void __init spear320_clk_init(void __iomem *soc_config_base, + struct clk *ras_apb_clk) { struct clk *clk; @@ -342,6 +343,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a3000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -349,6 +352,8 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a4000000.serial"); + /* Enforce ras_apb_clk */ + clk_set_parent(clk, ras_apb_clk); clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, ARRAY_SIZE(uartx_parents), @@ -379,12 +384,12 @@ static void __init spear320_clk_init(void __iomem *soc_config_base) clk_register_clkdev(clk, NULL, "60100000.serial"); } #else -static inline void spear320_clk_init(void __iomem *soc_config_base) { } +static inline void spear320_clk_init(void __iomem *sb, struct clk *rc) { } #endif void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base) { - struct clk *clk, *clk1; + struct clk *clk, *clk1, *ras_apb_clk; clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); @@ -613,6 +618,7 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB, RAS_APB_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_apb_clk", NULL); + ras_apb_clk = clk; clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0, RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock); @@ -659,5 +665,5 @@ void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_ else if (of_machine_is_compatible("st,spear310")) spear310_clk_init(); else if (of_machine_is_compatible("st,spear320")) - spear320_clk_init(soc_config_base); + spear320_clk_init(soc_config_base, ras_apb_clk); } -- cgit v1.2.3-18-g5258