From 4d52b48b43d0d1d5959fa722ee0046e3542e5e1b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 30 Jan 2006 11:38:00 -0800 Subject: [PATCH] sky2: support msi interrupt (revised) This hardware supports Message Signaled interrupts. When setting up, use software interrupt to check for bad hardware. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/sky2.h | 1 + 2 files changed, 78 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 62733a6ec75..8ed4bd17c0c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -101,6 +101,10 @@ static int copybreak __read_mostly = 256; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); +static int disable_msi = 0; +module_param(disable_msi, int, 0); +MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); + static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, @@ -3064,6 +3068,61 @@ static void __devinit sky2_show_addr(struct net_device *dev) dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); } +/* Handle software interrupt used during MSI test */ +static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct sky2_hw *hw = dev_id; + u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); + + if (status == 0) + return IRQ_NONE; + + if (status & Y2_IS_IRQ_SW) { + sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); + hw->msi = 1; + } + sky2_write32(hw, B0_Y2_SP_ICR, 2); + + sky2_read32(hw, B0_IMSK); + return IRQ_HANDLED; +} + +/* Test interrupt path by forcing a a software IRQ */ +static int __devinit sky2_test_msi(struct sky2_hw *hw) +{ + struct pci_dev *pdev = hw->pdev; + int i, err; + + sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); + + err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + return err; + } + + sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); + wmb(); + + for (i = 0; i < 10; i++) { + barrier(); + if (hw->msi) + goto found; + mdelay(1); + } + + err = -EOPNOTSUPP; + sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); + found: + sky2_write32(hw, B0_IMSK, 0); + + free_irq(pdev->irq, hw); + + return err; +} + static int __devinit sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -3184,6 +3243,20 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } + if (!disable_msi && pci_enable_msi(pdev) == 0) { + err = sky2_test_msi(hw); + if (err == -EOPNOTSUPP) { + /* MSI test failed, go back to INTx mode */ + printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, " + "switching to INTx mode. Please report this failure to " + "the PCI maintainer and include system chipset information.\n", + pci_name(pdev)); + pci_disable_msi(pdev); + } + else if (err) + goto err_out_unregister; + } + err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, hw); if (err) { @@ -3200,6 +3273,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: + if (hw->msi) + pci_disable_msi(pdev); if (dev1) { unregister_netdev(dev1); free_netdev(dev1); @@ -3242,6 +3317,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); + if (hw->msi) + pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 70525ac501d..fd12c289a23 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1841,6 +1841,7 @@ struct sky2_hw { struct net_device *dev[2]; int pm_cap; + int msi; u8 chip_id; u8 chip_rev; u8 copper; -- cgit v1.2.3-18-g5258