From 03d152d5582abc8a1c19cb107164c3724bbd4be4 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 1 Oct 2013 17:35:43 +0300 Subject: gpio/lynxpoint: check if the interrupt is enabled in IRQ handler Checking LP_INT_STAT is not enough in the interrupt handler because its contents get updated regardless of whether the pin has interrupt enabled or not. This causes the driver to loop forever for GPIOs that are pulled up. Fix this by checking the interrupt enable bit for the pin as well. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Acked-by: Mathias Nyman Signed-off-by: Linus Walleij --- drivers/gpio/gpio-lynxpoint.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c index 2d9ca6055e5..41b5913ddab 100644 --- a/drivers/gpio/gpio-lynxpoint.c +++ b/drivers/gpio/gpio-lynxpoint.c @@ -248,14 +248,15 @@ static void lp_gpio_irq_handler(unsigned irq, struct irq_desc *desc) struct lp_gpio *lg = irq_data_get_irq_handler_data(data); struct irq_chip *chip = irq_data_get_irq_chip(data); u32 base, pin, mask; - unsigned long reg, pending; + unsigned long reg, ena, pending; unsigned virq; /* check from GPIO controller which pin triggered the interrupt */ for (base = 0; base < lg->chip.ngpio; base += 32) { reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); + ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); - while ((pending = inl(reg))) { + while ((pending = (inl(reg) & inl(ena)))) { pin = __ffs(pending); mask = BIT(pin); /* Clear before handling so we don't lose an edge */ -- cgit v1.2.3-18-g5258 From 8c0fca8153224822121c85a64d6401903b9e4690 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Fri, 4 Oct 2013 10:59:57 -0700 Subject: gpiolib: safer implementation of desc_to_gpio() The current implementation of desc_to_gpio() relies on the chip pointer to be set to a valid value in order to compute the GPIO number. This was done in the hope that we can get rid of the gpio_desc global array, but this is not happening anytime soon. This patch reimplements desc_to_gpio() in a fashion similar to that of gpio_to_desc(). As a result, desc_to_gpio(gpio_to_desc(gpio)) == gpio is now always true. This allows to call desc_to_gpio() on non-initialized descriptors as some error-handling code currently does. Signed-off-by: Alexandre Courbot Reported-by: Dr. H. Nikolaus Schaller Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 86ef3461ec0..f33063114d5 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -136,7 +136,7 @@ static struct gpio_desc *gpio_to_desc(unsigned gpio) */ static int desc_to_gpio(const struct gpio_desc *desc) { - return desc->chip->base + gpio_chip_hwgpio(desc); + return desc - &gpio_desc[0]; } -- cgit v1.2.3-18-g5258 From 0204df470d6db830f0f2f5654ec582be84d81588 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Fri, 4 Oct 2013 10:59:58 -0700 Subject: gpiolib: let gpiod_request() return -EPROBE_DEFER Patch be1a4b brought some improvements to the GPIO error handling code, but also changed the return value of gpiod_request() when called on a not yet initialized GPIO descriptor: it now returns -EINVAL instead of -EPROBE_DEFER, and this affects some drivers. This patch restores the original behavior for gpiod_request(). It is safe to do so now that desc_to_gpio() does not rely on the GPIO descriptor to be initialized. Other functions changed by patch be1a4b do not see their return value affected, so these are not reverted. Signed-off-by: Alexandre Courbot Reported-by: Dr. H. Nikolaus Schaller Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f33063114d5..0dee0e0c247 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1398,7 +1398,7 @@ static int gpiod_request(struct gpio_desc *desc, const char *label) int status = -EPROBE_DEFER; unsigned long flags; - if (!desc || !desc->chip) { + if (!desc) { pr_warn("%s: invalid GPIO\n", __func__); return -EINVAL; } @@ -1406,6 +1406,8 @@ static int gpiod_request(struct gpio_desc *desc, const char *label) spin_lock_irqsave(&gpio_lock, flags); chip = desc->chip; + if (chip == NULL) + goto done; if (!try_module_get(chip->owner)) goto done; -- cgit v1.2.3-18-g5258