From 271002ca7956e5ef140c02af1bd8e93063924ec6 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 25 Mar 2012 17:23:19 -0700
Subject: Input: xilinx_ps2 - allocate serio port separately

'struct serio' is a refcounted data structure with lifetime rules different
from 'struct xps2data'. It is quite likely that serio_unregister_port() will
try to free memory allocated by the port and that is why it should be
allocated separately.

Also switch to using platform_get/set_drvdata instead of dev_get/set_drvdata
because we are dealing with platform device.

Reported-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/xilinx_ps2.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index d96d4c2a76a..1e983bec7d8 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -73,7 +73,8 @@ struct xps2data {
 	spinlock_t lock;
 	void __iomem *base_address;	/* virt. address of control registers */
 	unsigned int flags;
-	struct serio serio;		/* serio */
+	struct serio *serio;		/* serio */
+	struct device *dev;
 };
 
 /************************************/
@@ -119,7 +120,7 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 
 	/* Check which interrupt is active */
 	if (intr_sr & XPS2_IPIXR_RX_OVF)
-		dev_warn(drvdata->serio.dev.parent, "receive overrun error\n");
+		dev_warn(drvdata->dev, "receive overrun error\n");
 
 	if (intr_sr & XPS2_IPIXR_RX_ERR)
 		drvdata->flags |= SERIO_PARITY;
@@ -132,10 +133,10 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 
 		/* Error, if a byte is not received */
 		if (status) {
-			dev_err(drvdata->serio.dev.parent,
+			dev_err(drvdata->dev,
 				"wrong rcvd byte count (%d)\n", status);
 		} else {
-			serio_interrupt(&drvdata->serio, c, drvdata->flags);
+			serio_interrupt(drvdata->serio, c, drvdata->flags);
 			drvdata->flags = 0;
 		}
 	}
@@ -193,7 +194,7 @@ static int sxps2_open(struct serio *pserio)
 	error = request_irq(drvdata->irq, &xps2_interrupt, 0,
 				DRIVER_NAME, drvdata);
 	if (error) {
-		dev_err(drvdata->serio.dev.parent,
+		dev_err(drvdata->dev,
 			"Couldn't allocate interrupt %d\n", drvdata->irq);
 		return error;
 	}
@@ -259,15 +260,16 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 	}
 
 	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
-	if (!drvdata) {
-		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!drvdata || !serio) {
+		error = -ENOMEM;
+		goto failed1;
 	}
 
-	dev_set_drvdata(dev, drvdata);
-
 	spin_lock_init(&drvdata->lock);
 	drvdata->irq = r_irq.start;
+	drvdata->serio = serio;
+	drvdata->dev = dev;
 
 	phys_addr = r_mem.start;
 	remap_size = resource_size(&r_mem);
@@ -298,7 +300,6 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 		 (unsigned long long)phys_addr, drvdata->base_address,
 		 drvdata->irq);
 
-	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
 	serio->write = sxps2_write;
 	serio->open = sxps2_open;
@@ -312,13 +313,14 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
 
 	serio_register_port(serio);
 
+	platform_set_drvdata(ofdev, drvdata);
 	return 0;		/* success */
 
 failed2:
 	release_mem_region(phys_addr, remap_size);
 failed1:
+	kfree(serio);
 	kfree(drvdata);
-	dev_set_drvdata(dev, NULL);
 
 	return error;
 }
@@ -333,22 +335,21 @@ failed1:
  */
 static int __devexit xps2_of_remove(struct platform_device *of_dev)
 {
-	struct device *dev = &of_dev->dev;
-	struct xps2data *drvdata = dev_get_drvdata(dev);
+	struct xps2data *drvdata = platform_get_drvdata(of_dev);
 	struct resource r_mem; /* IO mem resources */
 
-	serio_unregister_port(&drvdata->serio);
+	serio_unregister_port(drvdata->serio);
 	iounmap(drvdata->base_address);
 
 	/* Get iospace of the device */
 	if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
-		dev_err(dev, "invalid address\n");
+		dev_err(drvdata->dev, "invalid address\n");
 	else
 		release_mem_region(r_mem.start, resource_size(&r_mem));
 
 	kfree(drvdata);
 
-	dev_set_drvdata(dev, NULL);
+	platform_set_drvdata(of_dev, NULL);
 
 	return 0;
 }
-- 
cgit v1.2.3-18-g5258


From 5a966261c0dfb836f54444ff3893638802183cac Mon Sep 17 00:00:00 2001
From: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Date: Sun, 25 Mar 2012 17:23:19 -0700
Subject: Input: add support for Wacom Stylus device with I2C interface

This adds support for Wacom Stylus device with I2C interface.

[Dan Carpenter <dan.carpenter@oracle.com>: fix NULL-pointer dereference
 in error handling path.]
Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig     |  12 ++
 drivers/input/touchscreen/Makefile    |   1 +
 drivers/input/touchscreen/wacom_i2c.c | 315 ++++++++++++++++++++++++++++++++++
 3 files changed, 328 insertions(+)
 create mode 100644 drivers/input/touchscreen/wacom_i2c.c

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 97b31a0e052..c5eb2b925be 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -306,6 +306,18 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+config TOUCHSCREEN_WACOM_I2C
+	tristate "Wacom Tablet support (I2C)"
+	depends on I2C
+	help
+	  Say Y here if you want to use the I2C version of the Wacom
+	  Pen Tablet.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wacom_i2c.
+
 config TOUCHSCREEN_LPC32XX
 	tristate "LPC32XX touchscreen controller"
 	depends on ARCH_LPC32XX
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3d5cf8cbf89..7cca7ddb464 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C)	+= wacom_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_WM831X)	+= wm831x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
new file mode 100644
index 00000000000..b8ca4a6bc91
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -0,0 +1,315 @@
+/*
+ * Wacom Penabled Driver for I2C
+ *
+ * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * <tobita.tatsunosuke@wacom.co.jp>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version of 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/unaligned.h>
+
+#define WACOM_CMD_QUERY0	0x04
+#define WACOM_CMD_QUERY1	0x00
+#define WACOM_CMD_QUERY2	0x33
+#define WACOM_CMD_QUERY3	0x02
+#define WACOM_CMD_THROW0	0x05
+#define WACOM_CMD_THROW1	0x00
+#define WACOM_QUERY_SIZE	19
+#define WACOM_RETRY_CNT		100
+
+struct wacom_features {
+	int x_max;
+	int y_max;
+	int pressure_max;
+	char fw_version;
+};
+
+struct wacom_i2c {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned int gpio;
+	u8 data[WACOM_QUERY_SIZE];
+};
+
+static int wacom_query_device(struct i2c_client *client,
+			      struct wacom_features *features)
+{
+	int ret;
+	u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
+			WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
+	u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
+	u8 data[WACOM_QUERY_SIZE];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd1),
+			.buf = cmd1,
+		},
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd2),
+			.buf = cmd2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(data),
+			.buf = data,
+		},
+	};
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	features->x_max = get_unaligned_le16(&data[3]);
+	features->y_max = get_unaligned_le16(&data[5]);
+	features->pressure_max = get_unaligned_le16(&data[11]);
+	features->fw_version = get_unaligned_le16(&data[13]);
+
+	dev_dbg(&client->dev,
+		"x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
+		features->x_max, features->y_max,
+		features->pressure_max, features->fw_version);
+
+	return 0;
+}
+
+static int wacom_i2c_fetch_data(struct wacom_i2c *wac_i2c)
+{
+	int retries = 0;
+	int ret;
+
+	do {
+		ret = i2c_master_recv(wac_i2c->client,
+				      wac_i2c->data, sizeof(wac_i2c->data));
+	} while (gpio_get_value(wac_i2c->gpio) == 0 &&
+		 retries++ < WACOM_RETRY_CNT);
+
+	if (retries >= WACOM_RETRY_CNT)
+		ret = -EIO;
+
+	return ret < 0 ? ret : 0;
+}
+
+static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
+{
+	struct wacom_i2c *wac_i2c = dev_id;
+	struct input_dev *input = wac_i2c->input;
+	u8 *data = wac_i2c->data;
+	unsigned int x, y, pressure;
+	unsigned char tsw, f1, f2, ers;
+	int error;
+
+	error = wacom_i2c_fetch_data(wac_i2c);
+	if (error)
+		goto out;
+
+	tsw = data[3] & 0x01;
+	ers = data[3] & 0x04;
+	f1 = data[3] & 0x02;
+	f2 = data[3] & 0x10;
+	x = le16_to_cpup((__le16 *)&data[4]);
+	y = le16_to_cpup((__le16 *)&data[6]);
+	pressure = le16_to_cpup((__le16 *)&data[8]);
+
+	input_report_key(input, BTN_TOUCH, tsw || ers);
+	input_report_key(input, BTN_TOOL_PEN, tsw);
+	input_report_key(input, BTN_TOOL_RUBBER, ers);
+	input_report_key(input, BTN_STYLUS, f1);
+	input_report_key(input, BTN_STYLUS2, f2);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int wacom_i2c_open(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+	int error;
+
+	/* Clear the device buffer */
+	error = wacom_i2c_fetch_data(wac_i2c);
+	if (error)
+		return error;
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void wacom_i2c_close(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	disable_irq(client->irq);
+}
+
+static int __devinit wacom_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct wacom_i2c *wac_i2c;
+	struct input_dev *input;
+	struct wacom_features features;
+	int gpio;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -EIO;
+	}
+
+	gpio = irq_to_gpio(client->irq);
+	if (gpio < 0) {
+		error = gpio;
+		dev_err(&client->dev,
+			"irq_to_gpio() failed, error: %d\n", error);
+		return error;
+	}
+
+	error = wacom_query_device(client, &features);
+	if (error)
+		return error;
+
+	wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!wac_i2c || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	wac_i2c->client = client;
+	wac_i2c->input = input;
+	wac_i2c->gpio = gpio;
+
+	input->name = "Wacom I2C Digitizer";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x56a;
+	input->id.version = features.fw_version;
+	input->dev.parent = &client->dev;
+	input->open = wacom_i2c_open;
+	input->close = wacom_i2c_close;
+
+	input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOOL_PEN, input->keybit);
+	__set_bit(BTN_TOOL_RUBBER, input->keybit);
+	__set_bit(BTN_STYLUS, input->keybit);
+	__set_bit(BTN_STYLUS2, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     0, features.pressure_max, 0, 0);
+
+	input_set_drvdata(input, wac_i2c);
+
+	error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
+				     IRQF_TRIGGER_FALLING,
+				     "wacom_i2c", wac_i2c);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ, error: %d\n", error);
+		goto err_free_mem;
+	}
+
+	/* Disable the IRQ, we'll enable it in wac_i2c_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(wac_i2c->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device, error: %d\n", error);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, wac_i2c);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, wac_i2c);
+err_free_mem:
+	input_free_device(input);
+	kfree(wac_i2c);
+
+	return error;
+}
+
+static int __devexit wacom_i2c_remove(struct i2c_client *client)
+{
+	struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
+
+	free_irq(client->irq, wac_i2c);
+	input_unregister_device(wac_i2c->input);
+	kfree(wac_i2c);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wacom_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int wacom_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
+
+static const struct i2c_device_id wacom_i2c_id[] = {
+	{ "WAC_I2C_EMR", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
+
+static struct i2c_driver wacom_i2c_driver = {
+	.driver	= {
+		.name	= "wacom_i2c",
+		.owner	= THIS_MODULE,
+		.pm	= &wacom_i2c_pm,
+	},
+
+	.probe		= wacom_i2c_probe,
+	.remove		= __devexit_p(wacom_i2c_remove),
+	.id_table	= wacom_i2c_id,
+};
+module_i2c_driver(wacom_i2c_driver);
+
+MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>");
+MODULE_DESCRIPTION("WACOM EMR I2C Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-18-g5258


From 0bf25a45386f284d591530ef174eaa9e44d84956 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Tue, 3 Apr 2012 13:39:44 -0700
Subject: Input: add support for LM8333 keypads

This driver adds support for the keypad part of the LM8333 and is
prepared for possible GPIO/PWM drivers. Note that this is not a MFD
because you cannot disable the keypad functionality which, thus,
has to be handled by the core anyhow.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/Kconfig  |  10 ++
 drivers/input/keyboard/Makefile |   1 +
 drivers/input/keyboard/lm8333.c | 236 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 247 insertions(+)
 create mode 100644 drivers/input/keyboard/lm8333.c

(limited to 'drivers')

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index f354813a13e..7eaf93fe512 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -309,6 +309,16 @@ config KEYBOARD_LM8323
 	  To compile this driver as a module, choose M here: the
 	  module will be called lm8323.
 
+config KEYBOARD_LM8333
+	tristate "LM8333 keypad chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LM8333 keypad controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lm8333.
+
 config KEYBOARD_LOCOMO
 	tristate "LoCoMo Keyboard Support"
 	depends on SHARP_LOCOMO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df7061f1291..b03b02456a8 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
 obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
 obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
+obj-$(CONFIG_KEYBOARD_LM8333)		+= lm8333.o
 obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
new file mode 100644
index 00000000000..9a8c4a6cf5c
--- /dev/null
+++ b/drivers/input/keyboard/lm8333.c
@@ -0,0 +1,236 @@
+/*
+ * LM8333 keypad driver
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/input/lm8333.h>
+
+#define LM8333_FIFO_READ		0x20
+#define LM8333_DEBOUNCE			0x22
+#define LM8333_READ_INT			0xD0
+#define LM8333_ACTIVE			0xE4
+#define LM8333_READ_ERROR		0xF0
+
+#define LM8333_KEYPAD_IRQ		(1 << 0)
+#define LM8333_ERROR_IRQ		(1 << 3)
+
+#define LM8333_ERROR_KEYOVR		0x04
+#define LM8333_ERROR_FIFOOVR		0x40
+
+#define LM8333_FIFO_TRANSFER_SIZE	16
+
+#define LM8333_ROW_SHIFT	4
+#define LM8333_NUM_ROWS		8
+
+
+struct lm8333 {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT];
+};
+
+/* The accessors try twice because the first access may be needed for wakeup */
+#define LM8333_READ_RETRIES 2
+
+int lm8333_read8(struct lm8333 *lm8333, u8 cmd)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_byte_data(lm8333->client, cmd);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf)
+{
+	int retries = 0, ret;
+
+	do {
+		ret = i2c_smbus_read_i2c_block_data(lm8333->client,
+						    cmd, len, buf);
+	} while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+	return ret;
+}
+
+static void lm8333_key_handler(struct lm8333 *lm8333)
+{
+	struct input_dev *input = lm8333->input;
+	u8 keys[LM8333_FIFO_TRANSFER_SIZE];
+	u8 code, pressed;
+	int i, ret;
+
+	ret = lm8333_read_block(lm8333, LM8333_FIFO_READ,
+				LM8333_FIFO_TRANSFER_SIZE, keys);
+	if (ret != LM8333_FIFO_TRANSFER_SIZE) {
+		dev_err(&lm8333->client->dev,
+			"Error %d while reading FIFO\n", ret);
+		return;
+	}
+
+	for (i = 0; keys[i] && i < LM8333_FIFO_TRANSFER_SIZE; i++) {
+		pressed = keys[i] & 0x80;
+		code = keys[i] & 0x7f;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, lm8333->keycodes[code], pressed);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t lm8333_irq_thread(int irq, void *data)
+{
+	struct lm8333 *lm8333 = data;
+	u8 status = lm8333_read8(lm8333, LM8333_READ_INT);
+
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & LM8333_ERROR_IRQ) {
+		u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR);
+
+		if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) {
+			u8 dummy[LM8333_FIFO_TRANSFER_SIZE];
+
+			lm8333_read_block(lm8333, LM8333_FIFO_READ,
+					LM8333_FIFO_TRANSFER_SIZE, dummy);
+		}
+		dev_err(&lm8333->client->dev, "Got error %02x\n", err);
+	}
+
+	if (status & LM8333_KEYPAD_IRQ)
+		lm8333_key_handler(lm8333);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit lm8333_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	const struct lm8333_platform_data *pdata = client->dev.platform_data;
+	struct lm8333 *lm8333;
+	struct input_dev *input;
+	int err, active_time;
+
+	if (!pdata)
+		return -EINVAL;
+
+	active_time = pdata->active_time ?: 500;
+	if (active_time / 3 <= pdata->debounce_time / 3) {
+		dev_err(&client->dev, "Active time not big enough!\n");
+		return -EINVAL;
+	}
+
+	lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!lm8333 || !input) {
+		err = -ENOMEM;
+		goto free_mem;
+	}
+
+	lm8333->client = client;
+	lm8333->input = input;
+
+	input->name = client->name;
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	input->keycode = lm8333->keycodes;
+	input->keycodesize = sizeof(lm8333->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(lm8333->keycodes);
+	input->evbit[0] = BIT_MASK(EV_KEY);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	matrix_keypad_build_keymap(pdata->matrix_data, LM8333_ROW_SHIFT,
+			input->keycode, input->keybit);
+
+	if (pdata->debounce_time) {
+		err = lm8333_write8(lm8333, LM8333_DEBOUNCE,
+				    pdata->debounce_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set debounce time\n");
+	}
+
+	if (pdata->active_time) {
+		err = lm8333_write8(lm8333, LM8333_ACTIVE,
+				    pdata->active_time / 3);
+		if (err)
+			dev_warn(&client->dev, "Unable to set active time\n");
+	}
+
+	err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "lm8333", lm8333);
+	if (err)
+		goto free_mem;
+
+	err = input_register_device(input);
+	if (err)
+		goto free_irq;
+
+	i2c_set_clientdata(client, lm8333);
+	return 0;
+
+ free_irq:
+	free_irq(client->irq, lm8333);
+ free_mem:
+	input_free_device(input);
+	kfree(lm8333);
+	return err;
+}
+
+static int __devexit lm8333_remove(struct i2c_client *client)
+{
+	struct lm8333 *lm8333 = i2c_get_clientdata(client);
+
+	free_irq(client->irq, lm8333);
+	input_unregister_device(lm8333->input);
+	kfree(lm8333);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm8333_id[] = {
+	{ "lm8333", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm8333_id);
+
+static struct i2c_driver lm8333_driver = {
+	.driver = {
+		.name		= "lm8333",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= lm8333_probe,
+	.remove		= __devexit_p(lm8333_remove),
+	.id_table	= lm8333_id,
+};
+module_i2c_driver(lm8333_driver);
+
+MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("LM8333 keyboard driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-18-g5258


From e6293d2f8a6cd427a1ef4ddecb16b1d5ae1929cd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 3 Apr 2012 11:30:28 -0700
Subject: Input: st1232 - add device tree support

This patch enables DT support for the st1232 driver
which is primarily used on the sh7372 Mackerel board.

[dtor@mail.ru: chnaged to use CONFIG_OF and of_match_ptr]
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/st1232.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index cbbf71b2269..216fabb5acc 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -255,6 +255,14 @@ static const struct i2c_device_id st1232_ts_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id st1232_ts_dt_ids[] __devinitconst = {
+	{ .compatible = "sitronix,st1232", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
+#endif
+
 static struct i2c_driver st1232_ts_driver = {
 	.probe		= st1232_ts_probe,
 	.remove		= __devexit_p(st1232_ts_remove),
@@ -262,6 +270,7 @@ static struct i2c_driver st1232_ts_driver = {
 	.driver = {
 		.name	= ST1232_TS_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
 #ifdef CONFIG_PM
 		.pm	= &st1232_ts_pm_ops,
 #endif
-- 
cgit v1.2.3-18-g5258


From b3571400395e318306165eabbfbe05a4c3e4366c Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue, 3 Apr 2012 11:30:28 -0700
Subject: Input: st1232 - switch to using SIMPLE_DEV_PM_OPS

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/st1232.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 216fabb5acc..6cb68a1981b 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -218,7 +218,7 @@ static int __devexit st1232_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int st1232_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -243,12 +243,11 @@ static int st1232_ts_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops st1232_ts_pm_ops = {
-	.suspend	= st1232_ts_suspend,
-	.resume		= st1232_ts_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
+			 st1232_ts_suspend, st1232_ts_resume);
+
 static const struct i2c_device_id st1232_ts_id[] = {
 	{ ST1232_TS_NAME, 0 },
 	{ }
@@ -271,9 +270,7 @@ static struct i2c_driver st1232_ts_driver = {
 		.name	= ST1232_TS_NAME,
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
-#ifdef CONFIG_PM
 		.pm	= &st1232_ts_pm_ops,
-#endif
 	},
 };
 
-- 
cgit v1.2.3-18-g5258


From 9fee619505bdb202c9f54b58ec996884160cdbf2 Mon Sep 17 00:00:00 2001
From: Jason Gerecke <killertofu@gmail.com>
Date: Tue, 3 Apr 2012 15:47:22 -0700
Subject: Input: wacom - add basic Intuos5 support

This patch adds support for the basic pen functions of Intuos5
tablets.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_wac.c | 36 +++++++++++++++++++++++++++++++++---
 drivers/input/tablet/wacom_wac.h |  3 +++
 2 files changed, 36 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 99fb6fed2bf..20ab3645a11 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -452,6 +452,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
 	if ((data[1] & 0xb8) == 0xa0) {
 		t = (data[6] << 2) | ((data[7] >> 6) & 3);
 		if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+                    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
 		    features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
 			t = (t << 1) | (data[1] & 1);
 		}
@@ -632,7 +633,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	    (features->type == INTUOS3 ||
 	     features->type == INTUOS3S ||
 	     features->type == INTUOS4 ||
-	     features->type == INTUOS4S)) {
+	     features->type == INTUOS4S ||
+	     features->type == INTUOS5 ||
+	     features->type == INTUOS5S)) {
 
 		return 0;
 	}
@@ -685,7 +688,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 
 		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
 			/* I4 mouse */
-			if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
+			if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+			    (features->type >= INTUOS5S && features->type <= INTUOS5L)) {
 				input_report_key(input, BTN_LEFT,   data[6] & 0x01);
 				input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
 				input_report_key(input, BTN_RIGHT,  data[6] & 0x04);
@@ -712,7 +716,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				}
 			}
 		} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
-				features->type == INTUOS4L) &&
+				features->type == INTUOS4L || features->type == INTUOS5L) &&
 			   wacom->tool[idx] == BTN_TOOL_LENS) {
 			/* Lens cursor packets */
 			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
@@ -1107,6 +1111,9 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4L:
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
 	case CINTIQ:
 	case WACOM_BEE:
 	case WACOM_21UX2:
@@ -1355,12 +1362,15 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		wacom_setup_intuos(wacom_wac);
 		break;
 
+	case INTUOS5:
+	case INTUOS5L:
 	case INTUOS4:
 	case INTUOS4L:
 		__set_bit(BTN_7, input_dev->keybit);
 		__set_bit(BTN_8, input_dev->keybit);
 		/* fall through */
 
+	case INTUOS5S:
 	case INTUOS4S:
 		for (i = 0; i < 7; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
@@ -1629,6 +1639,21 @@ static const struct wacom_features wacom_features_0xBB =
 static const struct wacom_features wacom_features_0xBC =
 	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047,
 	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x26 =
+	{ "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
+	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x27 =
+	{ "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
+	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x28 =
+	{ "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
+	  63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x29 =
+	{ "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
+	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x2A =
+	{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
+	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xF4 =
 	{ "Wacom Cintiq 24HD",    WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
 	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -1801,6 +1826,11 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xBA) },
 	{ USB_DEVICE_WACOM(0xBB) },
 	{ USB_DEVICE_WACOM(0xBC) },
+	{ USB_DEVICE_WACOM(0x26) },
+	{ USB_DEVICE_WACOM(0x27) },
+	{ USB_DEVICE_WACOM(0x28) },
+	{ USB_DEVICE_WACOM(0x29) },
+	{ USB_DEVICE_WACOM(0x2A) },
 	{ USB_DEVICE_WACOM(0x3F) },
 	{ USB_DEVICE_WACOM(0xC5) },
 	{ USB_DEVICE_WACOM(0xC6) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index ba5a334e54d..0aa00ce5fd7 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -65,6 +65,9 @@ enum {
 	INTUOS4S,
 	INTUOS4,
 	INTUOS4L,
+	INTUOS5S,
+	INTUOS5,
+	INTUOS5L,
 	WACOM_24HD,
 	WACOM_21UX2,
 	CINTIQ,
-- 
cgit v1.2.3-18-g5258


From f860e581fd473250c6dcbd3e13d576b6197e4694 Mon Sep 17 00:00:00 2001
From: Jason Gerecke <killertofu@gmail.com>
Date: Tue, 3 Apr 2012 15:48:35 -0700
Subject: Input: wacom - add Intuos5 Touch Ring/ExpressKey support

Intuos5 uses a new report type for Touch Ring and ExpressKey data.
Note that data from the capacitive sensors present on the ExpressKeys
will be ignored until a proper way is found to expose it.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_wac.c | 33 +++++++++++++++++++++++++++++++--
 drivers/input/tablet/wacom_wac.h |  1 +
 2 files changed, 32 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 20ab3645a11..f4a9efd393c 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -484,7 +484,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	int idx = 0, result;
 
 	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
-		&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) {
+		&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD
+		&& data[0] != WACOM_REPORT_INTUOS5PAD) {
 		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
                 return 0;
 	}
@@ -494,7 +495,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 		idx = data[1] & 0x01;
 
 	/* pad packets. Works as a second tool and is always in prox */
-	if (data[0] == WACOM_REPORT_INTUOSPAD) {
+	if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) {
 		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
 			input_report_key(input, BTN_0, (data[2] & 0x01));
 			input_report_key(input, BTN_1, (data[3] & 0x01));
@@ -570,6 +571,34 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_key(input, wacom->tool[1], 0);
 				input_report_abs(input, ABS_MISC, 0);
 			}
+		} else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+			int i;
+
+			/* Touch ring mode switch has no capacitive sensor */
+			input_report_key(input, BTN_0, (data[3] & 0x01));
+
+			/*
+			 * ExpressKeys on Intuos5 have a capacitive sensor in
+			 * addition to the mechanical switch. Switch data is
+			 * stored in data[4], capacitive data in data[5].
+			 */
+			for (i = 0; i < 8; i++)
+				input_report_key(input, BTN_1 + i, data[4] & (1 << i));
+
+			if (data[2] & 0x80) {
+				input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f));
+			} else {
+				/* Out of proximity, clear wheel value. */
+				input_report_abs(input, ABS_WHEEL, 0);
+			}
+
+			if (data[2] | (data[3] & 0x01) | data[4]) {
+				input_report_key(input, wacom->tool[1], 1);
+				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+			} else {
+				input_report_key(input, wacom->tool[1], 0);
+				input_report_abs(input, ABS_MISC, 0);
+			}
 		} else {
 			if (features->type == WACOM_21UX2) {
 				input_report_key(input, BTN_0, (data[5] & 0x01));
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 0aa00ce5fd7..17ba1868f0c 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -38,6 +38,7 @@
 #define WACOM_REPORT_INTUOSREAD		5
 #define WACOM_REPORT_INTUOSWRITE	6
 #define WACOM_REPORT_INTUOSPAD		12
+#define WACOM_REPORT_INTUOS5PAD		3
 #define WACOM_REPORT_TPC1FG		6
 #define WACOM_REPORT_TPC2FG		13
 #define WACOM_REPORT_TPCHID		15
-- 
cgit v1.2.3-18-g5258


From 9b5b95dd516a13d53ecf9217672d2116f05097bc Mon Sep 17 00:00:00 2001
From: Jason Gerecke <killertofu@gmail.com>
Date: Tue, 3 Apr 2012 15:50:37 -0700
Subject: Input: wacom - add Intuos5 Touch Ring LED support

The Touch Ring LEDs on Intuos5 tablets use a different report
format which supports only 4 levels of brightness. We remap
the 7-bit value obtained from sysfs to an appropriate value
for the tablet. Control of the crop mark LEDs (new to the I5)
is left for a later patch.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 71 +++++++++++++++++++++++++++++++++-------
 1 file changed, 59 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 19ba58640dc..d7713388a95 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -574,23 +574,39 @@ static void wacom_remove_shared_data(struct wacom_wac *wacom)
 static int wacom_led_control(struct wacom *wacom)
 {
 	unsigned char *buf;
-	int retval, led = 0;
+	int retval;
 
 	buf = kzalloc(9, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
-	    wacom->wacom_wac.features.type == WACOM_24HD)
-		led = (wacom->led.select[1] << 4) | 0x40;
-
-	led |=  wacom->led.select[0] | 0x4;
-
-	buf[0] = WAC_CMD_LED_CONTROL;
-	buf[1] = led;
-	buf[2] = wacom->led.llv;
-	buf[3] = wacom->led.hlv;
-	buf[4] = wacom->led.img_lum;
+	if (wacom->wacom_wac.features.type >= INTUOS5S &&
+	    wacom->wacom_wac.features.type <= INTUOS5L)	{
+		/*
+		 * Touch Ring and crop mark LED luminance may take on
+		 * one of four values:
+		 *    0 = Low; 1 = Medium; 2 = High; 3 = Off
+		 */
+		int ring_led = wacom->led.select[0] & 0x03;
+		int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
+		int crop_lum = 0;
+
+		buf[0] = WAC_CMD_LED_CONTROL;
+		buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
+	}
+	else {
+		int led = wacom->led.select[0] | 0x4;
+
+		if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
+		    wacom->wacom_wac.features.type == WACOM_24HD)
+			led |= (wacom->led.select[1] << 4) | 0x40;
+
+		buf[0] = WAC_CMD_LED_CONTROL;
+		buf[1] = led;
+		buf[2] = wacom->led.llv;
+		buf[3] = wacom->led.hlv;
+		buf[4] = wacom->led.img_lum;
+	}
 
 	retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
 				  buf, 9, WAC_CMD_RETRIES);
@@ -783,6 +799,17 @@ static struct attribute_group intuos4_led_attr_group = {
 	.attrs = intuos4_led_attrs,
 };
 
+static struct attribute *intuos5_led_attrs[] = {
+	&dev_attr_status0_luminance.attr,
+	&dev_attr_status_led0_select.attr,
+	NULL
+};
+
+static struct attribute_group intuos5_led_attr_group = {
+	.name = "wacom_led",
+	.attrs = intuos5_led_attrs,
+};
+
 static int wacom_initialize_leds(struct wacom *wacom)
 {
 	int error;
@@ -812,6 +839,19 @@ static int wacom_initialize_leds(struct wacom *wacom)
 					   &cintiq_led_attr_group);
 		break;
 
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		wacom->led.select[0] = 0;
+		wacom->led.select[1] = 0;
+		wacom->led.llv = 32;
+		wacom->led.hlv = 0;
+		wacom->led.img_lum = 0;
+
+		error = sysfs_create_group(&wacom->intf->dev.kobj,
+					   &intuos5_led_attr_group);
+		break;
+
 	default:
 		return 0;
 	}
@@ -840,6 +880,13 @@ static void wacom_destroy_leds(struct wacom *wacom)
 		sysfs_remove_group(&wacom->intf->dev.kobj,
 				   &cintiq_led_attr_group);
 		break;
+
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		sysfs_remove_group(&wacom->intf->dev.kobj,
+				   &intuos5_led_attr_group);
+		break;
 	}
 }
 
-- 
cgit v1.2.3-18-g5258


From ae584ca473289377dd7fd8c61439db4bfab5489a Mon Sep 17 00:00:00 2001
From: Jason Gerecke <killertofu@gmail.com>
Date: Tue, 3 Apr 2012 15:50:40 -0700
Subject: Input: wacom - add Intuos5 multitouch sensor support

Intuos5 tablets with PTH-* model numbers include a multitouch sensor
which use the same touch reports as the 3rd-generation Bamboo. No
useful information is in the HID descriptor for the touch interface
so hardcoded values are used during setup.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 25 ++++++++++++++++
 drivers/input/tablet/wacom_wac.c | 64 ++++++++++++++++++++++++++++++++++++----
 2 files changed, 84 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d7713388a95..1c874adb705 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -233,6 +233,9 @@ static int wacom_parse_logical_collection(unsigned char *report,
  * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
  * Collection. Instead they define a Logical Collection with a single
  * Logical Maximum for both X and Y.
+ *
+ * Intuos5 touch interface does not contain useful data. We deal with
+ * this after returning from this function.
  */
 static int wacom_parse_hid(struct usb_interface *intf,
 			   struct hid_descriptor *hid_desc,
@@ -1085,6 +1088,28 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (error)
 		goto fail3;
 
+	/*
+	 * Intuos5 has no useful data about its touch interface in its
+	 * HID descriptor. If this is the touch interface (wMaxPacketSize
+	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
+	 */
+	if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
+			features->device_type = BTN_TOOL_FINGER;
+			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+
+			features->x_phy =
+				(features->x_max * 100) / features->x_resolution;
+			features->y_phy =
+				(features->y_max * 100) / features->y_resolution;
+
+			features->x_max = 4096;
+			features->y_max = 4096;
+		} else {
+			features->device_type = BTN_TOOL_PEN;
+		}
+	}
+
 	wacom_setup_device_quirks(features);
 
 	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index f4a9efd393c..a6173431d80 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -321,6 +321,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = true;
+
 		/* serial number of the tool */
 		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
 			(data[4] << 20) + (data[5] << 12) +
@@ -406,6 +409,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
+		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+			wacom->shared->stylus_in_proximity = false;
+
 		/*
 		 * Reset all states otherwise we lose the initial states
 		 * when in-prox next time
@@ -1140,9 +1146,6 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 	case INTUOS4S:
 	case INTUOS4:
 	case INTUOS4L:
-	case INTUOS5S:
-	case INTUOS5:
-	case INTUOS5L:
 	case CINTIQ:
 	case WACOM_BEE:
 	case WACOM_21UX2:
@@ -1150,6 +1153,15 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
+	case INTUOS5S:
+	case INTUOS5:
+	case INTUOS5L:
+		if (len == WACOM_PKGLEN_BBTOUCH3)
+			sync = wacom_bpt3_touch(wacom_wac);
+		else
+			sync = wacom_intuos_irq(wacom_wac);
+		break;
+
 	case TABLETPC:
 	case TABLETPC2FG:
 		sync = wacom_tpc_irq(wacom_wac, len);
@@ -1224,7 +1236,8 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
-	    features->type == BAMBOO_PT || features->type == WIRELESS)
+	    features->type == BAMBOO_PT || features->type == WIRELESS ||
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1393,13 +1406,54 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 	case INTUOS5:
 	case INTUOS5L:
+		if (features->device_type == BTN_TOOL_PEN) {
+			__set_bit(BTN_7, input_dev->keybit);
+			__set_bit(BTN_8, input_dev->keybit);
+		}
+		/* fall through */
+
+	case INTUOS5S:
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+		if (features->device_type == BTN_TOOL_PEN) {
+			for (i = 0; i < 7; i++)
+				__set_bit(BTN_0 + i, input_dev->keybit);
+
+			input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+					      features->distance_max,
+					      0, 0);
+
+			input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+			wacom_setup_intuos(wacom_wac);
+		} else if (features->device_type == BTN_TOOL_FINGER) {
+			__clear_bit(ABS_MISC, input_dev->absbit);
+
+			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+			__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+
+			input_mt_init_slots(input_dev, 16);
+
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			                     0, 255, 0, 0);
+
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					     0, features->x_max,
+					     features->x_fuzz, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					     0, features->y_max,
+					     features->y_fuzz, 0);
+		}
+		break;
+
 	case INTUOS4:
 	case INTUOS4L:
 		__set_bit(BTN_7, input_dev->keybit);
 		__set_bit(BTN_8, input_dev->keybit);
 		/* fall through */
 
-	case INTUOS5S:
 	case INTUOS4S:
 		for (i = 0; i < 7; i++)
 			__set_bit(BTN_0 + i, input_dev->keybit);
-- 
cgit v1.2.3-18-g5258


From 65ac9f7a23c934ee8c40dc20955e75db4924bfea Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 3 Apr 2012 23:50:17 -0700
Subject: Input: serio - use module_serio_driver

This patch converts the drivers in drivers/input/* to use
module_serio_driver() macro which makes the code smaller and
a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joystick/magellan.c          | 17 +----------------
 drivers/input/joystick/spaceball.c         | 17 +----------------
 drivers/input/joystick/spaceorb.c          | 17 +----------------
 drivers/input/joystick/stinger.c           | 17 +----------------
 drivers/input/joystick/twidjoy.c           | 17 +----------------
 drivers/input/joystick/warrior.c           | 17 +----------------
 drivers/input/joystick/zhenhua.c           | 17 +----------------
 drivers/input/keyboard/hil_kbd.c           | 13 +------------
 drivers/input/keyboard/lkkbd.c             | 17 +----------------
 drivers/input/keyboard/newtonkbd.c         | 13 +------------
 drivers/input/keyboard/stowaway.c          | 13 +------------
 drivers/input/keyboard/sunkbd.c            | 17 +----------------
 drivers/input/keyboard/xtkbd.c             | 13 +------------
 drivers/input/mouse/sermouse.c             | 13 +------------
 drivers/input/mouse/vsxxxaa.c              | 14 +-------------
 drivers/input/serio/ps2mult.c              | 13 +------------
 drivers/input/serio/serio_raw.c            | 13 +------------
 drivers/input/touchscreen/dynapro.c        | 17 +----------------
 drivers/input/touchscreen/elo.c            | 17 +----------------
 drivers/input/touchscreen/fujitsu_ts.c     | 13 +------------
 drivers/input/touchscreen/gunze.c          | 17 +----------------
 drivers/input/touchscreen/h3600_ts_input.c | 17 +----------------
 drivers/input/touchscreen/hampshire.c      | 17 +----------------
 drivers/input/touchscreen/inexio.c         | 17 +----------------
 drivers/input/touchscreen/mtouch.c         | 17 +----------------
 drivers/input/touchscreen/penmount.c       | 17 +----------------
 drivers/input/touchscreen/touchit213.c     | 17 +----------------
 drivers/input/touchscreen/touchright.c     | 17 +----------------
 drivers/input/touchscreen/touchwin.c       | 17 +----------------
 drivers/input/touchscreen/tsc40.c          | 12 +-----------
 drivers/input/touchscreen/wacom_w8001.c    | 13 +------------
 31 files changed, 31 insertions(+), 452 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 40e40780747..9fb153eef2f 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -222,19 +222,4 @@ static struct serio_driver magellan_drv = {
 	.disconnect	= magellan_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init magellan_init(void)
-{
-	return serio_register_driver(&magellan_drv);
-}
-
-static void __exit magellan_exit(void)
-{
-	serio_unregister_driver(&magellan_drv);
-}
-
-module_init(magellan_init);
-module_exit(magellan_exit);
+module_serio_driver(magellan_drv);
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index 0cd9b29356a..80a7b27a457 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -296,19 +296,4 @@ static struct serio_driver spaceball_drv = {
 	.disconnect	= spaceball_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceball_init(void)
-{
-	return serio_register_driver(&spaceball_drv);
-}
-
-static void __exit spaceball_exit(void)
-{
-	serio_unregister_driver(&spaceball_drv);
-}
-
-module_init(spaceball_init);
-module_exit(spaceball_exit);
+module_serio_driver(spaceball_drv);
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index a694bf8e557..a41f291652e 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -237,19 +237,4 @@ static struct serio_driver spaceorb_drv = {
 	.disconnect	= spaceorb_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceorb_init(void)
-{
-	return serio_register_driver(&spaceorb_drv);
-}
-
-static void __exit spaceorb_exit(void)
-{
-	serio_unregister_driver(&spaceorb_drv);
-}
-
-module_init(spaceorb_init);
-module_exit(spaceorb_exit);
+module_serio_driver(spaceorb_drv);
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index e0db9f5e4b4..0f51a60e14a 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -208,19 +208,4 @@ static struct serio_driver stinger_drv = {
 	.disconnect	= stinger_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init stinger_init(void)
-{
-	return serio_register_driver(&stinger_drv);
-}
-
-static void __exit stinger_exit(void)
-{
-	serio_unregister_driver(&stinger_drv);
-}
-
-module_init(stinger_init);
-module_exit(stinger_exit);
+module_serio_driver(stinger_drv);
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 3f4ec73c955..2556a819357 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -257,19 +257,4 @@ static struct serio_driver twidjoy_drv = {
 	.disconnect	= twidjoy_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init twidjoy_init(void)
-{
-	return serio_register_driver(&twidjoy_drv);
-}
-
-static void __exit twidjoy_exit(void)
-{
-	serio_unregister_driver(&twidjoy_drv);
-}
-
-module_init(twidjoy_init);
-module_exit(twidjoy_exit);
+module_serio_driver(twidjoy_drv);
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index f72c83e15e6..23b3071abb6 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -217,19 +217,4 @@ static struct serio_driver warrior_drv = {
 	.disconnect	= warrior_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init warrior_init(void)
-{
-	return serio_register_driver(&warrior_drv);
-}
-
-static void __exit warrior_exit(void)
-{
-	serio_unregister_driver(&warrior_drv);
-}
-
-module_init(warrior_init);
-module_exit(warrior_exit);
+module_serio_driver(warrior_drv);
diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c
index b5853125c89..c4de4388fd7 100644
--- a/drivers/input/joystick/zhenhua.c
+++ b/drivers/input/joystick/zhenhua.c
@@ -225,19 +225,4 @@ static struct serio_driver zhenhua_drv = {
 	.disconnect	= zhenhua_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init zhenhua_init(void)
-{
-	return serio_register_driver(&zhenhua_drv);
-}
-
-static void __exit zhenhua_exit(void)
-{
-	serio_unregister_driver(&zhenhua_drv);
-}
-
-module_init(zhenhua_init);
-module_exit(zhenhua_exit);
+module_serio_driver(zhenhua_drv);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index fed31e0947a..589e3c258f3 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -583,15 +583,4 @@ static struct serio_driver hil_serio_drv = {
 	.interrupt	= hil_dev_interrupt
 };
 
-static int __init hil_dev_init(void)
-{
-	return serio_register_driver(&hil_serio_drv);
-}
-
-static void __exit hil_dev_exit(void)
-{
-	serio_unregister_driver(&hil_serio_drv);
-}
-
-module_init(hil_dev_init);
-module_exit(hil_dev_exit);
+module_serio_driver(hil_serio_drv);
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index fa9bb6d235e..fc0a63c2f27 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -731,19 +731,4 @@ static struct serio_driver lkkbd_drv = {
 	.interrupt	= lkkbd_interrupt,
 };
 
-/*
- * The functions for insering/removing us as a module.
- */
-static int __init lkkbd_init(void)
-{
-	return serio_register_driver(&lkkbd_drv);
-}
-
-static void __exit lkkbd_exit(void)
-{
-	serio_unregister_driver(&lkkbd_drv);
-}
-
-module_init(lkkbd_init);
-module_exit(lkkbd_exit);
-
+module_serio_driver(lkkbd_drv);
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 48d1cab0aa1..f971898ad59 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -166,15 +166,4 @@ static struct serio_driver nkbd_drv = {
 	.disconnect	= nkbd_disconnect,
 };
 
-static int __init nkbd_init(void)
-{
-	return serio_register_driver(&nkbd_drv);
-}
-
-static void __exit nkbd_exit(void)
-{
-	serio_unregister_driver(&nkbd_drv);
-}
-
-module_init(nkbd_init);
-module_exit(nkbd_exit);
+module_serio_driver(nkbd_drv);
diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c
index 7437219370b..cc612c5d542 100644
--- a/drivers/input/keyboard/stowaway.c
+++ b/drivers/input/keyboard/stowaway.c
@@ -170,15 +170,4 @@ static struct serio_driver skbd_drv = {
 	.disconnect	= skbd_disconnect,
 };
 
-static int __init skbd_init(void)
-{
-	return serio_register_driver(&skbd_drv);
-}
-
-static void __exit skbd_exit(void)
-{
-	serio_unregister_driver(&skbd_drv);
-}
-
-module_init(skbd_init);
-module_exit(skbd_exit);
+module_serio_driver(skbd_drv);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index a99a04b03ee..5f836b1638c 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -369,19 +369,4 @@ static struct serio_driver sunkbd_drv = {
 	.disconnect	= sunkbd_disconnect,
 };
 
-/*
- * The functions for insering/removing us as a module.
- */
-
-static int __init sunkbd_init(void)
-{
-	return serio_register_driver(&sunkbd_drv);
-}
-
-static void __exit sunkbd_exit(void)
-{
-	serio_unregister_driver(&sunkbd_drv);
-}
-
-module_init(sunkbd_init);
-module_exit(sunkbd_exit);
+module_serio_driver(sunkbd_drv);
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 37b01d777a4..d050d9d0011 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -169,15 +169,4 @@ static struct serio_driver xtkbd_drv = {
 	.disconnect	= xtkbd_disconnect,
 };
 
-static int __init xtkbd_init(void)
-{
-	return serio_register_driver(&xtkbd_drv);
-}
-
-static void __exit xtkbd_exit(void)
-{
-	serio_unregister_driver(&xtkbd_drv);
-}
-
-module_init(xtkbd_init);
-module_exit(xtkbd_exit);
+module_serio_driver(xtkbd_drv);
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index 17ff137b9bd..d5928fd0c91 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -355,15 +355,4 @@ static struct serio_driver sermouse_drv = {
 	.disconnect	= sermouse_disconnect,
 };
 
-static int __init sermouse_init(void)
-{
-	return serio_register_driver(&sermouse_drv);
-}
-
-static void __exit sermouse_exit(void)
-{
-	serio_unregister_driver(&sermouse_drv);
-}
-
-module_init(sermouse_init);
-module_exit(sermouse_exit);
+module_serio_driver(sermouse_drv);
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index eb9a3cfbeef..e900d465aaf 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -548,16 +548,4 @@ static struct serio_driver vsxxxaa_drv = {
 	.disconnect	= vsxxxaa_disconnect,
 };
 
-static int __init vsxxxaa_init(void)
-{
-	return serio_register_driver(&vsxxxaa_drv);
-}
-
-static void __exit vsxxxaa_exit(void)
-{
-	serio_unregister_driver(&vsxxxaa_drv);
-}
-
-module_init(vsxxxaa_init);
-module_exit(vsxxxaa_exit);
-
+module_serio_driver(vsxxxaa_drv);
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 15aa81c9f1f..a76fb64f03d 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -304,15 +304,4 @@ static struct serio_driver ps2mult_drv = {
 	.reconnect	= ps2mult_reconnect,
 };
 
-static int __init ps2mult_init(void)
-{
-	return serio_register_driver(&ps2mult_drv);
-}
-
-static void __exit ps2mult_exit(void)
-{
-	serio_unregister_driver(&ps2mult_drv);
-}
-
-module_init(ps2mult_init);
-module_exit(ps2mult_exit);
+module_serio_driver(ps2mult_drv);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 4494233d331..948fd5a045f 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -432,15 +432,4 @@ static struct serio_driver serio_raw_drv = {
 	.manual_bind	= true,
 };
 
-static int __init serio_raw_init(void)
-{
-	return serio_register_driver(&serio_raw_drv);
-}
-
-static void __exit serio_raw_exit(void)
-{
-	serio_unregister_driver(&serio_raw_drv);
-}
-
-module_init(serio_raw_init);
-module_exit(serio_raw_exit);
+module_serio_driver(serio_raw_drv);
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
index 455353908bd..1809677a651 100644
--- a/drivers/input/touchscreen/dynapro.c
+++ b/drivers/input/touchscreen/dynapro.c
@@ -188,19 +188,4 @@ static struct serio_driver dynapro_drv = {
 	.disconnect	= dynapro_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init dynapro_init(void)
-{
-	return serio_register_driver(&dynapro_drv);
-}
-
-static void __exit dynapro_exit(void)
-{
-	serio_unregister_driver(&dynapro_drv);
-}
-
-module_init(dynapro_init);
-module_exit(dynapro_exit);
+module_serio_driver(dynapro_drv);
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 486d31ba9c0..957423d1471 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -405,19 +405,4 @@ static struct serio_driver elo_drv = {
 	.disconnect	= elo_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init elo_init(void)
-{
-	return serio_register_driver(&elo_drv);
-}
-
-static void __exit elo_exit(void)
-{
-	serio_unregister_driver(&elo_drv);
-}
-
-module_init(elo_init);
-module_exit(elo_exit);
+module_serio_driver(elo_drv);
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
index 80b21800355..10794ddbdf5 100644
--- a/drivers/input/touchscreen/fujitsu_ts.c
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -175,15 +175,4 @@ static struct serio_driver fujitsu_drv = {
 	.disconnect	= fujitsu_disconnect,
 };
 
-static int __init fujitsu_init(void)
-{
-	return serio_register_driver(&fujitsu_drv);
-}
-
-static void __exit fujitsu_exit(void)
-{
-	serio_unregister_driver(&fujitsu_drv);
-}
-
-module_init(fujitsu_init);
-module_exit(fujitsu_exit);
+module_serio_driver(fujitsu_drv);
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index a54f90e02ab..41c71766bf1 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -186,19 +186,4 @@ static struct serio_driver gunze_drv = {
 	.disconnect	= gunze_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init gunze_init(void)
-{
-	return serio_register_driver(&gunze_drv);
-}
-
-static void __exit gunze_exit(void)
-{
-	serio_unregister_driver(&gunze_drv);
-}
-
-module_init(gunze_init);
-module_exit(gunze_exit);
+module_serio_driver(gunze_drv);
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 6107e563e68..b9e8686a6f1 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -476,19 +476,4 @@ static struct serio_driver h3600ts_drv = {
 	.disconnect	= h3600ts_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init h3600ts_init(void)
-{
-	return serio_register_driver(&h3600ts_drv);
-}
-
-static void __exit h3600ts_exit(void)
-{
-	serio_unregister_driver(&h3600ts_drv);
-}
-
-module_init(h3600ts_init);
-module_exit(h3600ts_exit);
+module_serio_driver(h3600ts_drv);
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
index 2da6cc31bb2..0cc47ea98ac 100644
--- a/drivers/input/touchscreen/hampshire.c
+++ b/drivers/input/touchscreen/hampshire.c
@@ -187,19 +187,4 @@ static struct serio_driver hampshire_drv = {
 	.disconnect	= hampshire_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init hampshire_init(void)
-{
-	return serio_register_driver(&hampshire_drv);
-}
-
-static void __exit hampshire_exit(void)
-{
-	serio_unregister_driver(&hampshire_drv);
-}
-
-module_init(hampshire_init);
-module_exit(hampshire_exit);
+module_serio_driver(hampshire_drv);
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
index 192ade0a0fb..a29c99c3224 100644
--- a/drivers/input/touchscreen/inexio.c
+++ b/drivers/input/touchscreen/inexio.c
@@ -189,19 +189,4 @@ static struct serio_driver inexio_drv = {
 	.disconnect	= inexio_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init inexio_init(void)
-{
-	return serio_register_driver(&inexio_drv);
-}
-
-static void __exit inexio_exit(void)
-{
-	serio_unregister_driver(&inexio_drv);
-}
-
-module_init(inexio_init);
-module_exit(inexio_exit);
+module_serio_driver(inexio_drv);
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index 9077228418b..eb66b7c37c2 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -202,19 +202,4 @@ static struct serio_driver mtouch_drv = {
 	.disconnect	= mtouch_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init mtouch_init(void)
-{
-	return serio_register_driver(&mtouch_drv);
-}
-
-static void __exit mtouch_exit(void)
-{
-	serio_unregister_driver(&mtouch_drv);
-}
-
-module_init(mtouch_init);
-module_exit(mtouch_exit);
+module_serio_driver(mtouch_drv);
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index 4c012fb2b01..4ccde45b9da 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -317,19 +317,4 @@ static struct serio_driver pm_drv = {
 	.disconnect	= pm_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init pm_init(void)
-{
-	return serio_register_driver(&pm_drv);
-}
-
-static void __exit pm_exit(void)
-{
-	serio_unregister_driver(&pm_drv);
-}
-
-module_init(pm_init);
-module_exit(pm_exit);
+module_serio_driver(pm_drv);
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
index d1297ba19da..5f29e5b8e1c 100644
--- a/drivers/input/touchscreen/touchit213.c
+++ b/drivers/input/touchscreen/touchit213.c
@@ -216,19 +216,4 @@ static struct serio_driver touchit213_drv = {
 	.disconnect	= touchit213_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init touchit213_init(void)
-{
-	return serio_register_driver(&touchit213_drv);
-}
-
-static void __exit touchit213_exit(void)
-{
-	serio_unregister_driver(&touchit213_drv);
-}
-
-module_init(touchit213_init);
-module_exit(touchit213_exit);
+module_serio_driver(touchit213_drv);
diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c
index 3a5c142c2a7..8a2887daf19 100644
--- a/drivers/input/touchscreen/touchright.c
+++ b/drivers/input/touchscreen/touchright.c
@@ -176,19 +176,4 @@ static struct serio_driver tr_drv = {
 	.disconnect	= tr_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tr_init(void)
-{
-	return serio_register_driver(&tr_drv);
-}
-
-static void __exit tr_exit(void)
-{
-	serio_unregister_driver(&tr_drv);
-}
-
-module_init(tr_init);
-module_exit(tr_exit);
+module_serio_driver(tr_drv);
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
index 763a656a59f..588cdcb839d 100644
--- a/drivers/input/touchscreen/touchwin.c
+++ b/drivers/input/touchscreen/touchwin.c
@@ -183,19 +183,4 @@ static struct serio_driver tw_drv = {
 	.disconnect	= tw_disconnect,
 };
 
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tw_init(void)
-{
-	return serio_register_driver(&tw_drv);
-}
-
-static void __exit tw_exit(void)
-{
-	serio_unregister_driver(&tw_drv);
-}
-
-module_init(tw_init);
-module_exit(tw_exit);
+module_serio_driver(tw_drv);
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index 29d5ed4dd31..63209aaa55f 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -167,17 +167,7 @@ static struct serio_driver tsc_drv = {
 	.disconnect     = tsc_disconnect,
 };
 
-static int __init tsc_ser_init(void)
-{
-	return serio_register_driver(&tsc_drv);
-}
-module_init(tsc_ser_init);
-
-static void __exit tsc_exit(void)
-{
-	serio_unregister_driver(&tsc_drv);
-}
-module_exit(tsc_exit);
+module_serio_driver(tsc_drv);
 
 MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 1569a3934ab..8f9ad2f893b 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -594,15 +594,4 @@ static struct serio_driver w8001_drv = {
 	.disconnect	= w8001_disconnect,
 };
 
-static int __init w8001_init(void)
-{
-	return serio_register_driver(&w8001_drv);
-}
-
-static void __exit w8001_exit(void)
-{
-	serio_unregister_driver(&w8001_drv);
-}
-
-module_init(w8001_init);
-module_exit(w8001_exit);
+module_serio_driver(w8001_drv);
-- 
cgit v1.2.3-18-g5258


From 98a84131926ebafe868c65631b69d4912922211e Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Tue, 3 Apr 2012 23:52:27 -0700
Subject: Input: gameport - use module_gameport_driver

This patch converts the drivers in drivers/input/* to use
module_gameport_driver() macro which makes the code smaller
and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joystick/a3d.c        | 13 +------------
 drivers/input/joystick/adi.c        | 17 +----------------
 drivers/input/joystick/cobra.c      | 13 +------------
 drivers/input/joystick/gf2k.c       | 13 +------------
 drivers/input/joystick/grip.c       | 13 +------------
 drivers/input/joystick/grip_mp.c    | 13 +------------
 drivers/input/joystick/guillemot.c  | 13 +------------
 drivers/input/joystick/interact.c   | 13 +------------
 drivers/input/joystick/joydump.c    | 13 +------------
 drivers/input/joystick/sidewinder.c | 13 +------------
 drivers/input/joystick/tmdc.c       | 13 +------------
 11 files changed, 11 insertions(+), 136 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 1639ab2b94b..85bc8dc07cf 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -413,15 +413,4 @@ static struct gameport_driver a3d_drv = {
 	.disconnect	= a3d_disconnect,
 };
 
-static int __init a3d_init(void)
-{
-	return gameport_register_driver(&a3d_drv);
-}
-
-static void __exit a3d_exit(void)
-{
-	gameport_unregister_driver(&a3d_drv);
-}
-
-module_init(a3d_init);
-module_exit(a3d_exit);
+module_gameport_driver(a3d_drv);
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index b992fbf91f2..0cbfd2dfabf 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -557,10 +557,6 @@ static void adi_disconnect(struct gameport *gameport)
 	kfree(port);
 }
 
-/*
- * The gameport device structure.
- */
-
 static struct gameport_driver adi_drv = {
 	.driver		= {
 		.name	= "adi",
@@ -570,15 +566,4 @@ static struct gameport_driver adi_drv = {
 	.disconnect	= adi_disconnect,
 };
 
-static int __init adi_init(void)
-{
-	return gameport_register_driver(&adi_drv);
-}
-
-static void __exit adi_exit(void)
-{
-	gameport_unregister_driver(&adi_drv);
-}
-
-module_init(adi_init);
-module_exit(adi_exit);
+module_gameport_driver(adi_drv);
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 3497b87c3d0..65367e44d71 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -261,15 +261,4 @@ static struct gameport_driver cobra_drv = {
 	.disconnect	= cobra_disconnect,
 };
 
-static int __init cobra_init(void)
-{
-	return gameport_register_driver(&cobra_drv);
-}
-
-static void __exit cobra_exit(void)
-{
-	gameport_unregister_driver(&cobra_drv);
-}
-
-module_init(cobra_init);
-module_exit(cobra_exit);
+module_gameport_driver(cobra_drv);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 0536b1b2f01..ab1cf288200 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -373,15 +373,4 @@ static struct gameport_driver gf2k_drv = {
 	.disconnect	= gf2k_disconnect,
 };
 
-static int __init gf2k_init(void)
-{
-	return gameport_register_driver(&gf2k_drv);
-}
-
-static void __exit gf2k_exit(void)
-{
-	gameport_unregister_driver(&gf2k_drv);
-}
-
-module_init(gf2k_init);
-module_exit(gf2k_exit);
+module_gameport_driver(gf2k_drv);
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index fc55899ba6c..9e1beff57c3 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -424,15 +424,4 @@ static struct gameport_driver grip_drv = {
 	.disconnect	= grip_disconnect,
 };
 
-static int __init grip_init(void)
-{
-	return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
-	gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index 2d47baf4776..c0f9c7b7eb4 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -687,15 +687,4 @@ static struct gameport_driver grip_drv = {
 	.disconnect	= grip_disconnect,
 };
 
-static int __init grip_init(void)
-{
-	return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
-	gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 4058d4b272f..55196f730af 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -281,15 +281,4 @@ static struct gameport_driver guillemot_drv = {
 	.disconnect	= guillemot_disconnect,
 };
 
-static int __init guillemot_init(void)
-{
-	return gameport_register_driver(&guillemot_drv);
-}
-
-static void __exit guillemot_exit(void)
-{
-	gameport_unregister_driver(&guillemot_drv);
-}
-
-module_init(guillemot_init);
-module_exit(guillemot_exit);
+module_gameport_driver(guillemot_drv);
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index 16fb19d1ca2..88c22623a2e 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -311,15 +311,4 @@ static struct gameport_driver interact_drv = {
 	.disconnect	= interact_disconnect,
 };
 
-static int __init interact_init(void)
-{
-	return gameport_register_driver(&interact_drv);
-}
-
-static void __exit interact_exit(void)
-{
-	gameport_unregister_driver(&interact_drv);
-}
-
-module_init(interact_init);
-module_exit(interact_exit);
+module_gameport_driver(interact_drv);
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index cd894a0564a..7eb878bab96 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -159,15 +159,4 @@ static struct gameport_driver joydump_drv = {
 	.disconnect	= joydump_disconnect,
 };
 
-static int __init joydump_init(void)
-{
-	return gameport_register_driver(&joydump_drv);
-}
-
-static void __exit joydump_exit(void)
-{
-	gameport_unregister_driver(&joydump_drv);
-}
-
-module_init(joydump_init);
-module_exit(joydump_exit);
+module_gameport_driver(joydump_drv);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index b8d86115644..04c69af3714 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -820,15 +820,4 @@ static struct gameport_driver sw_drv = {
 	.disconnect	= sw_disconnect,
 };
 
-static int __init sw_init(void)
-{
-	return gameport_register_driver(&sw_drv);
-}
-
-static void __exit sw_exit(void)
-{
-	gameport_unregister_driver(&sw_drv);
-}
-
-module_init(sw_init);
-module_exit(sw_exit);
+module_gameport_driver(sw_drv);
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index d6c60980711..5ef9bcdb034 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -436,15 +436,4 @@ static struct gameport_driver tmdc_drv = {
 	.disconnect	= tmdc_disconnect,
 };
 
-static int __init tmdc_init(void)
-{
-	return gameport_register_driver(&tmdc_drv);
-}
-
-static void __exit tmdc_exit(void)
-{
-	gameport_unregister_driver(&tmdc_drv);
-}
-
-module_init(tmdc_init);
-module_exit(tmdc_exit);
+module_gameport_driver(tmdc_drv);
-- 
cgit v1.2.3-18-g5258


From d568778298f58330bcc8cc23845676d1143c8d33 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue, 10 Apr 2012 00:21:09 -0700
Subject: Input: wacom_i2c - do not use irq_to_gpio

Because irq_to_gpio() is not available on many platforms let's switch
to level-triggered one-shot IRQs that will stay active as long as
there is data to be read.

Tested-by: Tobita Tatsunosuke <tobita.tatsunosuke@wacom.co.jp>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/wacom_i2c.c | 41 ++++-------------------------------
 1 file changed, 4 insertions(+), 37 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index b8ca4a6bc91..35572575d34 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -39,7 +39,6 @@ struct wacom_features {
 struct wacom_i2c {
 	struct i2c_client *client;
 	struct input_dev *input;
-	unsigned int gpio;
 	u8 data[WACOM_QUERY_SIZE];
 };
 
@@ -91,23 +90,6 @@ static int wacom_query_device(struct i2c_client *client,
 	return 0;
 }
 
-static int wacom_i2c_fetch_data(struct wacom_i2c *wac_i2c)
-{
-	int retries = 0;
-	int ret;
-
-	do {
-		ret = i2c_master_recv(wac_i2c->client,
-				      wac_i2c->data, sizeof(wac_i2c->data));
-	} while (gpio_get_value(wac_i2c->gpio) == 0 &&
-		 retries++ < WACOM_RETRY_CNT);
-
-	if (retries >= WACOM_RETRY_CNT)
-		ret = -EIO;
-
-	return ret < 0 ? ret : 0;
-}
-
 static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
 {
 	struct wacom_i2c *wac_i2c = dev_id;
@@ -117,8 +99,9 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
 	unsigned char tsw, f1, f2, ers;
 	int error;
 
-	error = wacom_i2c_fetch_data(wac_i2c);
-	if (error)
+	error = i2c_master_recv(wac_i2c->client,
+				wac_i2c->data, sizeof(wac_i2c->data));
+	if (error < 0)
 		goto out;
 
 	tsw = data[3] & 0x01;
@@ -147,12 +130,6 @@ static int wacom_i2c_open(struct input_dev *dev)
 {
 	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
 	struct i2c_client *client = wac_i2c->client;
-	int error;
-
-	/* Clear the device buffer */
-	error = wacom_i2c_fetch_data(wac_i2c);
-	if (error)
-		return error;
 
 	enable_irq(client->irq);
 
@@ -173,7 +150,6 @@ static int __devinit wacom_i2c_probe(struct i2c_client *client,
 	struct wacom_i2c *wac_i2c;
 	struct input_dev *input;
 	struct wacom_features features;
-	int gpio;
 	int error;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
@@ -181,14 +157,6 @@ static int __devinit wacom_i2c_probe(struct i2c_client *client,
 		return -EIO;
 	}
 
-	gpio = irq_to_gpio(client->irq);
-	if (gpio < 0) {
-		error = gpio;
-		dev_err(&client->dev,
-			"irq_to_gpio() failed, error: %d\n", error);
-		return error;
-	}
-
 	error = wacom_query_device(client, &features);
 	if (error)
 		return error;
@@ -202,7 +170,6 @@ static int __devinit wacom_i2c_probe(struct i2c_client *client,
 
 	wac_i2c->client = client;
 	wac_i2c->input = input;
-	wac_i2c->gpio = gpio;
 
 	input->name = "Wacom I2C Digitizer";
 	input->id.bustype = BUS_I2C;
@@ -228,7 +195,7 @@ static int __devinit wacom_i2c_probe(struct i2c_client *client,
 	input_set_drvdata(input, wac_i2c);
 
 	error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
-				     IRQF_TRIGGER_FALLING,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				     "wacom_i2c", wac_i2c);
 	if (error) {
 		dev_err(&client->dev,
-- 
cgit v1.2.3-18-g5258


From b5e9528bd19c6a3379aac468186f41d2bda48b04 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 11 Apr 2012 00:13:50 -0700
Subject: Input: ep93xx_keypad - switch to using dev_pm_ops

Also use CONFIG_PM_SLEEP instead of CONFIG_PM to guard PM methods.

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/ep93xx_keypad.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 0ba69f3fcb5..df194bdaab5 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -182,16 +182,10 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
 }
 
 
-#ifdef CONFIG_PM
-/*
- * NOTE: I don't know if this is correct, or will work on the ep93xx.
- *
- * None of the existing ep93xx drivers have power management support.
- * But, this is basically what the pxa27x_keypad driver does.
- */
-static int ep93xx_keypad_suspend(struct platform_device *pdev,
-				 pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int ep93xx_keypad_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
@@ -210,8 +204,9 @@ static int ep93xx_keypad_suspend(struct platform_device *pdev,
 	return 0;
 }
 
-static int ep93xx_keypad_resume(struct platform_device *pdev)
+static int ep93xx_keypad_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
@@ -232,10 +227,10 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#else	/* !CONFIG_PM */
-#define ep93xx_keypad_suspend	NULL
-#define ep93xx_keypad_resume	NULL
-#endif	/* !CONFIG_PM */
+#endif
+
+static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
+			 ep93xx_keypad_suspend, ep93xx_keypad_resume);
 
 static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 {
@@ -384,11 +379,10 @@ static struct platform_driver ep93xx_keypad_driver = {
 	.driver		= {
 		.name	= "ep93xx-keypad",
 		.owner	= THIS_MODULE,
+		.pm	= &ep93xx_keypad_pm_ops,
 	},
 	.probe		= ep93xx_keypad_probe,
 	.remove		= __devexit_p(ep93xx_keypad_remove),
-	.suspend	= ep93xx_keypad_suspend,
-	.resume		= ep93xx_keypad_resume,
 };
 module_platform_driver(ep93xx_keypad_driver);
 
-- 
cgit v1.2.3-18-g5258


From 5cb727a86780fcac34de871cd12bea3f744d6be2 Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Fri, 20 Apr 2012 23:02:49 -0700
Subject: Input: lpc32xx_ts - add device tree support

This change implements device tree support for the LPC32xx SoC's touchscreen
controller.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/lpc32xx_ts.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index afcd0691ec6..e8fccbc452d 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /*
  * Touchscreen controller register offsets
@@ -383,6 +384,14 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
 #define LPC32XX_TS_PM_OPS NULL
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id lpc32xx_tsc_of_match[] = {
+	{ .compatible = "nxp,lpc32xx-tsc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
+#endif
+
 static struct platform_driver lpc32xx_ts_driver = {
 	.probe		= lpc32xx_ts_probe,
 	.remove		= __devexit_p(lpc32xx_ts_remove),
@@ -390,6 +399,7 @@ static struct platform_driver lpc32xx_ts_driver = {
 		.name	= MOD_NAME,
 		.owner	= THIS_MODULE,
 		.pm	= LPC32XX_TS_PM_OPS,
+		.of_match_table = of_match_ptr(lpc32xx_tsc_of_match),
 	},
 };
 module_platform_driver(lpc32xx_ts_driver);
-- 
cgit v1.2.3-18-g5258


From 0508c19a6fddd1ba5495004370e4fc2fd4a7d33a Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:08 -0700
Subject: Input: matrix-keypad - fix 'duplicate const' sparse warning

SIMPLE_DEV_PM_OPS already defines constant dev_pm_ops.

Also guard PM methods with CONFIG_PM_SLEEP and get rid of some
unneeded #ifdefs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/matrix_keypad.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 9b223d73de3..8714d680e2e 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -224,7 +224,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
 	disable_row_irqs(keypad);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
 {
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
@@ -293,11 +293,11 @@ static int matrix_keypad_resume(struct device *dev)
 
 	return 0;
 }
-
-static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
-				matrix_keypad_suspend, matrix_keypad_resume);
 #endif
 
+static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+			 matrix_keypad_suspend, matrix_keypad_resume);
+
 static int __devinit init_matrix_gpio(struct platform_device *pdev,
 					struct matrix_keypad *keypad)
 {
@@ -491,9 +491,7 @@ static struct platform_driver matrix_keypad_driver = {
 	.driver		= {
 		.name	= "matrix-keypad",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &matrix_keypad_pm_ops,
-#endif
 	},
 };
 module_platform_driver(matrix_keypad_driver);
-- 
cgit v1.2.3-18-g5258


From 01111fcd42b050bdb7113a7c2c0aed2eaef67b53 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:08 -0700
Subject: Input: matrix-keypad - allocate keycodes with keypad structure

Instead of allocating and managing keymap separately from the keypad
structure stick it at the end as a variable-length array.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/matrix_keypad.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 8714d680e2e..a4ff08caa44 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -27,7 +27,6 @@
 struct matrix_keypad {
 	const struct matrix_keypad_platform_data *pdata;
 	struct input_dev *input_dev;
-	unsigned short *keycodes;
 	unsigned int row_shift;
 
 	DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
@@ -38,6 +37,8 @@ struct matrix_keypad {
 	bool scan_pending;
 	bool stopped;
 	bool gpio_all_disabled;
+
+	unsigned short keycodes[];
 };
 
 /*
@@ -381,8 +382,8 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	const struct matrix_keymap_data *keymap_data;
 	struct matrix_keypad *keypad;
 	struct input_dev *input_dev;
-	unsigned short *keycodes;
 	unsigned int row_shift;
+	size_t keymap_size;
 	int err;
 
 	pdata = pdev->dev.platform_data;
@@ -398,20 +399,18 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	}
 
 	row_shift = get_count_order(pdata->num_col_gpios);
-
-	keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
-	keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
-				sizeof(*keycodes),
-			   GFP_KERNEL);
+	keymap_size = (pdata->num_row_gpios << row_shift) *
+			sizeof(keypad->keycodes[0]);
+	keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
+			 GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!keypad || !keycodes || !input_dev) {
+	if (!keypad || !input_dev) {
 		err = -ENOMEM;
 		goto err_free_mem;
 	}
 
 	keypad->input_dev = input_dev;
 	keypad->pdata = pdata;
-	keypad->keycodes = keycodes;
 	keypad->row_shift = row_shift;
 	keypad->stopped = true;
 	INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
@@ -426,8 +425,8 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	input_dev->open		= matrix_keypad_start;
 	input_dev->close	= matrix_keypad_stop;
 
-	input_dev->keycode	= keycodes;
-	input_dev->keycodesize	= sizeof(*keycodes);
+	input_dev->keycode	= keypad->keycodes;
+	input_dev->keycodesize	= sizeof(keypad->keycodes[0]);
 	input_dev->keycodemax	= pdata->num_row_gpios << row_shift;
 
 	matrix_keypad_build_keymap(keymap_data, row_shift,
@@ -451,7 +450,6 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 
 err_free_mem:
 	input_free_device(input_dev);
-	kfree(keycodes);
 	kfree(keypad);
 	return err;
 }
@@ -479,7 +477,6 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 
 	input_unregister_device(keypad->input_dev);
 	platform_set_drvdata(pdev, NULL);
-	kfree(keypad->keycodes);
 	kfree(keypad);
 
 	return 0;
-- 
cgit v1.2.3-18-g5258


From b83643ebf2242388585e95c9a8d2353745d77cfd Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:09 -0700
Subject: Input: matrix-keypad - undo GPIO setup if input_register_device fails

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/matrix_keypad.c | 53 +++++++++++++++++++---------------
 1 file changed, 30 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index a4ff08caa44..98ae281bedb 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -299,11 +299,11 @@ static int matrix_keypad_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
 			 matrix_keypad_suspend, matrix_keypad_resume);
 
-static int __devinit init_matrix_gpio(struct platform_device *pdev,
-					struct matrix_keypad *keypad)
+static int __devinit matrix_keypad_init_gpio(struct platform_device *pdev,
+					     struct matrix_keypad *keypad)
 {
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
-	int i, err = -EINVAL;
+	int i, err;
 
 	/* initialized strobe lines as outputs, activated */
 	for (i = 0; i < pdata->num_col_gpios; i++) {
@@ -349,8 +349,7 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
 					"matrix-keypad", keypad);
 			if (err) {
 				dev_err(&pdev->dev,
-					"Unable to acquire interrupt "
-					"for GPIO line %i\n",
+					"Unable to acquire interrupt for GPIO line %i\n",
 					pdata->row_gpios[i]);
 				goto err_free_irqs;
 			}
@@ -376,6 +375,25 @@ err_free_cols:
 	return err;
 }
 
+static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
+{
+	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	int i;
+
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+	}
+
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
+	for (i = 0; i < pdata->num_col_gpios; i++)
+		gpio_free(pdata->col_gpios[i]);
+}
+
 static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 {
 	const struct matrix_keypad_platform_data *pdata;
@@ -435,19 +453,21 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
-	err = init_matrix_gpio(pdev, keypad);
+	err = matrix_keypad_init_gpio(pdev, keypad);
 	if (err)
 		goto err_free_mem;
 
 	err = input_register_device(keypad->input_dev);
 	if (err)
-		goto err_free_mem;
+		goto err_free_gpio;
 
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 	platform_set_drvdata(pdev, keypad);
 
 	return 0;
 
+err_free_gpio:
+	matrix_keypad_free_gpio(keypad);
 err_free_mem:
 	input_free_device(input_dev);
 	kfree(keypad);
@@ -457,28 +477,15 @@ err_free_mem:
 static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 {
 	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
-	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
-	int i;
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	if (pdata->clustered_irq > 0) {
-		free_irq(pdata->clustered_irq, keypad);
-	} else {
-		for (i = 0; i < pdata->num_row_gpios; i++)
-			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
-	}
-
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		gpio_free(pdata->row_gpios[i]);
-
-	for (i = 0; i < pdata->num_col_gpios; i++)
-		gpio_free(pdata->col_gpios[i]);
-
+	matrix_keypad_free_gpio(keypad);
 	input_unregister_device(keypad->input_dev);
-	platform_set_drvdata(pdev, NULL);
 	kfree(keypad);
 
+	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
-- 
cgit v1.2.3-18-g5258


From bcad87bd92f4331d4422c1afd571e66f7f5c95d6 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:09 -0700
Subject: Input: cma3000-d0x - remove unneeded checks

data->mode is unsigned and can not be less than 0.

Reported-by: Werner <w.landgraf@ru.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/cma3000_d0x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 06517e60e50..a3735a01e9f 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -318,7 +318,7 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
 	mutex_init(&data->mutex);
 
 	data->mode = pdata->mode;
-	if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+	if (data->mode > CMAMODE_POFF) {
 		data->mode = CMAMODE_MOTDET;
 		dev_warn(dev,
 			 "Invalid mode specified, assuming Motion Detect\n");
-- 
cgit v1.2.3-18-g5258


From 71f3d070a309504cdfef87b9e98836395b75ae0e Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:09 -0700
Subject: Input: tc3589x-keypad - remove unnecessary checks

settle_time and debounce_period are u8 and thus can not be greater than
TC3589x_MAX_DEBOUNCE_SETTLE which is 255.

There also no need to mask out nibbles form board->krow and board->kcol
as we validate that they are in correct range.

Reported-by: Werner <w.landgraf@ru.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/tc3589x-keypad.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 2dee3e4e7c6..f4da2a7a697 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -96,21 +96,15 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
 {
 	int ret;
 	struct tc3589x *tc3589x = keypad->tc3589x;
-	u8 settle_time = keypad->board->settle_time;
-	u8 dbounce_period = keypad->board->debounce_period;
-	u8 rows = keypad->board->krow & 0xf;	/* mask out the nibble */
-	u8 column = keypad->board->kcol & 0xf;	/* mask out the nibble */
-
-	/* validate platform configurations */
-	if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
-	    keypad->board->krow > TC3589x_MAX_KPROW ||
-	    keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
-	    keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+	const struct tc3589x_keypad_platform_data *board = keypad->board;
+
+	/* validate platform configuration */
+	if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW)
 		return -EINVAL;
 
 	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
 	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
-			(rows << KP_ROW_SHIFT) | column);
+			(board->krow << KP_ROW_SHIFT) | board->kcol);
 	if (ret < 0)
 		return ret;
 
@@ -124,12 +118,14 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
 		return ret;
 
 	/* Configure settle time */
-	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG,
+				board->settle_time);
 	if (ret < 0)
 		return ret;
 
 	/* Configure debounce time */
-	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE,
+				board->debounce_period);
 	if (ret < 0)
 		return ret;
 
-- 
cgit v1.2.3-18-g5258


From 486c8aba39e5f194519cd5c0e85e5d1de8b74b03 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 20 Apr 2012 22:33:08 -0700
Subject: Input: serio_raw - ensure we don't block in non-blocking read

Avoid calling wait_event_interruptible() if client requested non-blocking
read, since it is not guaranteed that another thread will not consume
event after we checked if serio_raw->head != serio_raw->tail.

Also ensure we do not return 0 but keep waiting instead in blocking case,
when another thread steals "our" byte.

Reviewed-by: David Herrmann <dh.herrmann@googlemail.com>
Reviewed-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/serio_raw.c | 43 ++++++++++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 18 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 948fd5a045f..3e243621c0e 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -165,31 +165,38 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer,
 	struct serio_raw *serio_raw = client->serio_raw;
 	char uninitialized_var(c);
 	ssize_t read = 0;
-	int retval;
+	int error = 0;
 
-	if (serio_raw->dead)
-		return -ENODEV;
+	do {
+		if (serio_raw->dead)
+			return -ENODEV;
 
-	if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK))
-		return -EAGAIN;
+		if (serio_raw->head == serio_raw->tail &&
+		    (file->f_flags & O_NONBLOCK))
+			return -EAGAIN;
 
-	retval = wait_event_interruptible(serio_raw->wait,
-			serio_raw->head != serio_raw->tail || serio_raw->dead);
-	if (retval)
-		return retval;
+		if (count == 0)
+			break;
 
-	if (serio_raw->dead)
-		return -ENODEV;
+		while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+			if (put_user(c, buffer++)) {
+				error = -EFAULT;
+				goto out;
+			}
+			read++;
+		}
 
-	while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
-		if (put_user(c, buffer++)) {
-			retval = -EFAULT;
+		if (read)
 			break;
-		}
-		read++;
-	}
 
-	return read ?: retval;
+		if (!(file->f_flags & O_NONBLOCK))
+			error = wait_event_interruptible(serio_raw->wait,
+					serio_raw->head != serio_raw->tail ||
+					serio_raw->dead);
+	} while (!error);
+
+out:
+	return read ?: error;
 }
 
 static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
-- 
cgit v1.2.3-18-g5258


From 5d066474cd64a5877391e3711e8c7973e6478cc8 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 21 Apr 2012 23:37:53 -0700
Subject: Input: use module_pci_driver

This patch converts the drivers in drivers/input/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/gameport/emu10k1-gp.c | 13 +------------
 drivers/input/gameport/fm801-gp.c   | 16 ++--------------
 drivers/input/serio/pcips2.c        | 15 ++-------------
 3 files changed, 5 insertions(+), 39 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index 422aa0a6b77..daceafe7ee7 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -125,15 +125,4 @@ static struct pci_driver emu_driver = {
         .remove =       __devexit_p(emu_remove),
 };
 
-static int __init emu_init(void)
-{
-	return pci_register_driver(&emu_driver);
-}
-
-static void __exit emu_exit(void)
-{
-	pci_unregister_driver(&emu_driver);
-}
-
-module_init(emu_init);
-module_exit(emu_exit);
+module_pci_driver(emu_driver);
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index a3b70ff2101..48ad3829ff2 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -144,6 +144,7 @@ static const struct pci_device_id fm801_gp_id_table[] = {
 	{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0  },
 	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
 
 static struct pci_driver fm801_gp_driver = {
 	.name =		"FM801_gameport",
@@ -152,20 +153,7 @@ static struct pci_driver fm801_gp_driver = {
 	.remove =	__devexit_p(fm801_gp_remove),
 };
 
-static int __init fm801_gp_init(void)
-{
-	return pci_register_driver(&fm801_gp_driver);
-}
-
-static void __exit fm801_gp_exit(void)
-{
-	pci_unregister_driver(&fm801_gp_driver);
-}
-
-module_init(fm801_gp_init);
-module_exit(fm801_gp_exit);
-
-MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
+module_pci_driver(fm801_gp_driver);
 
 MODULE_DESCRIPTION("FM801 gameport driver");
 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 43494742541..0c42497aaaf 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -206,6 +206,7 @@ static const struct pci_device_id pcips2_ids[] = {
 	},
 	{ 0, }
 };
+MODULE_DEVICE_TABLE(pci, pcips2_ids);
 
 static struct pci_driver pcips2_driver = {
 	.name			= "pcips2",
@@ -214,20 +215,8 @@ static struct pci_driver pcips2_driver = {
 	.remove			= __devexit_p(pcips2_remove),
 };
 
-static int __init pcips2_init(void)
-{
-	return pci_register_driver(&pcips2_driver);
-}
-
-static void __exit pcips2_exit(void)
-{
-	pci_unregister_driver(&pcips2_driver);
-}
-
-module_init(pcips2_init);
-module_exit(pcips2_exit);
+module_pci_driver(pcips2_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
 MODULE_DESCRIPTION("PCI PS/2 keyboard/mouse driver");
-MODULE_DEVICE_TABLE(pci, pcips2_ids);
-- 
cgit v1.2.3-18-g5258


From f57fe78ee48f7aa1f859e7e9c4d6987276a72ecc Mon Sep 17 00:00:00 2001
From: Jesper Juhl <jj@chaosbits.net>
Date: Sun, 22 Apr 2012 23:18:11 -0700
Subject: Input: atkbd - fix language in a printed message

I believe that "trying to access hardware" is more correct English
than "trying access hardware".

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index e05a2e7073c..add5ffd9fe2 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -433,7 +433,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		if (printk_ratelimit())
 			dev_warn(&serio->dev,
 				 "Spurious %s on %s. "
-				 "Some program might be trying access hardware directly.\n",
+				 "Some program might be trying to access hardware directly.\n",
 				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
 		goto out;
 	case ATKBD_RET_ERR:
-- 
cgit v1.2.3-18-g5258


From 34604086bea11f1f4d7ff124c84dab9b89956837 Mon Sep 17 00:00:00 2001
From: Roland Stigge <stigge@antcom.de>
Date: Mon, 23 Apr 2012 22:26:38 -0700
Subject: Input: lpc32xx_ts - fix device tree compatible string

During the device tree integration of the various LPC32xx drivers,
we agreed on using non-wildcard "compatible" strings. This change
switches lpc32xx_ts touchscreen driver to use "nxp,lpc3220-tsc".

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/lpc32xx_ts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index e8fccbc452d..4c2b8ed3bf1 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -386,7 +386,7 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
 
 #ifdef CONFIG_OF
 static struct of_device_id lpc32xx_tsc_of_match[] = {
-	{ .compatible = "nxp,lpc32xx-tsc", },
+	{ .compatible = "nxp,lpc3220-tsc", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
-- 
cgit v1.2.3-18-g5258


From 482d74ceb09db45b5d19fd1ae3810b38afbc0518 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Mon, 23 Apr 2012 22:26:58 -0700
Subject: Input: aiptek - adjust error-handling code label

At the point of this error-handling code, aiptek->urb has been allocated,
and it does not appear to be less necessary to free it here than in the
error-handling code just below.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/aiptek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 205d16aab44..a33d3470c47 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1856,7 +1856,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (i == ARRAY_SIZE(speeds)) {
 		dev_info(&intf->dev,
 			 "Aiptek tried all speeds, no sane response\n");
-		goto fail2;
+		goto fail3;
 	}
 
 	/* Associate this driver's struct with the usb interface.
-- 
cgit v1.2.3-18-g5258


From f393ee2b814e3291c12565000210b3cf10aa5c1d Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Sun, 29 Apr 2012 21:09:17 -0700
Subject: Input: wacom - retrieve maximum number of touch points

From the HID usage table when it is supported.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 29 +++++++++++++++++++-
 drivers/input/tablet/wacom_wac.c | 59 ++++++++++++++++++++++++----------------
 drivers/input/tablet/wacom_wac.h |  1 +
 3 files changed, 65 insertions(+), 24 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 98e9dd692d6..be13223793f 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -28,6 +28,7 @@
 #define HID_USAGE_Y_TILT		0x3e
 #define HID_USAGE_FINGER		0x22
 #define HID_USAGE_STYLUS		0x20
+#define HID_USAGE_CONTACTMAX		0x55
 #define HID_COLLECTION			0xa1
 #define HID_COLLECTION_LOGICAL		0x02
 #define HID_COLLECTION_END		0xc0
@@ -201,6 +202,27 @@ static int wacom_parse_logical_collection(unsigned char *report,
 	return length;
 }
 
+static void wacom_retrieve_report_data(struct usb_interface *intf,
+				       struct wacom_features *features)
+{
+	int result = 0;
+	unsigned char *rep_data;
+
+	rep_data = kmalloc(2, GFP_KERNEL);
+	if (rep_data) {
+
+		rep_data[0] = 12;
+		result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
+					  rep_data[0], &rep_data, 2,
+					  WAC_MSG_RETRIES);
+
+		if (result >= 0 && rep_data[1] > 2)
+			features->touch_max = rep_data[1];
+
+		kfree(rep_data);
+	}
+}
+
 /*
  * Interface Descriptor of wacom devices can be incomplete and
  * inconsistent so wacom_features table is used to store stylus
@@ -377,6 +399,11 @@ static int wacom_parse_hid(struct usb_interface *intf,
 				pen = 1;
 				i++;
 				break;
+
+			case HID_USAGE_CONTACTMAX:
+				wacom_retrieve_report_data(intf, features);
+				i++;
+				break;
 			}
 			break;
 
@@ -1085,7 +1112,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
-	/* Retrieve the physical and logical size for OEM devices */
+	/* Retrieve the physical and logical size for touch devices */
 	error = wacom_retrieve_hid_descriptor(intf, features);
 	if (error)
 		goto fail3;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index d96e186f71d..e5cd0e57d17 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1434,7 +1434,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
 			__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
 
-			input_mt_init_slots(input_dev, 16);
+			input_mt_init_slots(input_dev, features->touch_max);
 
 			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			                     0, 255, 0, 0);
@@ -1467,7 +1467,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case TABLETPC2FG:
 		if (features->device_type == BTN_TOOL_FINGER) {
 
-			input_mt_init_slots(input_dev, 2);
+			input_mt_init_slots(input_dev, features->touch_max);
 			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
 					0, MT_TOOL_MAX, 0, 0);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1522,6 +1522,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+			input_mt_init_slots(input_dev, features->touch_max);
 
 			if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
 				__set_bit(BTN_TOOL_TRIPLETAP,
@@ -1529,13 +1530,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 				__set_bit(BTN_TOOL_QUADTAP,
 					  input_dev->keybit);
 
-				input_mt_init_slots(input_dev, 16);
-
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
 						     0, 255, 0, 0);
-			} else {
-				input_mt_init_slots(input_dev, 2);
 			}
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1724,13 +1721,16 @@ static const struct wacom_features wacom_features_0xBC =
 	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x26 =
 	{ "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
-	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0x27 =
 	{ "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
-	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0x28 =
 	{ "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
-	  63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0x29 =
 	{ "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
 	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -1778,13 +1778,16 @@ static const struct wacom_features wacom_features_0x9F =
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE2 =
 	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xE3 =
 	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xE6 =
 	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	.touch_max = 2 };
 static const struct wacom_features wacom_features_0xEC =
 	{ "Wacom ISDv4 EC",       WACOM_PKGLEN_GRAPHIRE,  25710, 14500,  255,
 	  0, TABLETPC,    WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1793,19 +1796,22 @@ static const struct wacom_features wacom_features_0x47 =
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x84 =
 	{ "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0,
-	  0, WIRELESS, 0, 0 };
+	  0, WIRELESS, 0, 0, .touch_max = 16 };
 static const struct wacom_features wacom_features_0xD0 =
 	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD1 =
 	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD4 =
 	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1814,28 +1820,35 @@ static const struct wacom_features wacom_features_0xD5 =
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xD6 =
 	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD7 =
 	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD8 =
 	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xDA =
 	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static struct wacom_features wacom_features_0xDB =
 	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xDD =
         { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN,     14720,  9200, 1023,
           31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xDE =
         { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN,    14720,  9200, 1023,
-          31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0xDF =
         { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN,    21648, 13700, 1023,
-          31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 16 };
 static const struct wacom_features wacom_features_0x6004 =
 	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
 	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 17ba1868f0c..321269c1ac4 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -99,6 +99,7 @@ struct wacom_features {
 	int pressure_fuzz;
 	int distance_fuzz;
 	unsigned quirks;
+	unsigned touch_max;
 };
 
 struct wacom_shared {
-- 
cgit v1.2.3-18-g5258


From 1963518b9b1b8019d33b4b08deee6f873ffa2730 Mon Sep 17 00:00:00 2001
From: Ping Cheng <pinglinux@gmail.com>
Date: Sun, 29 Apr 2012 21:09:18 -0700
Subject: Input: wacom - add 0xE5 (MT device) support

Main part of patch is adding support for a new Wacom MT touch
packet and labels these devices using MTSCREEN type.

Other items of interest:

Delete some duplicate code in HID parsing for Y info since
its already done in X path.

In wacom_query_tablet_data(), only invoke the set report
that requests tablets to send Wacom Touch packets for
Finger interfaces.  Mostly, this is to make code intent clear.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom.h     |  4 +-
 drivers/input/tablet/wacom_sys.c | 91 +++++++++++++++++++++---------------
 drivers/input/tablet/wacom_wac.c | 99 ++++++++++++++++++++++++++++++++++++++--
 drivers/input/tablet/wacom_wac.h |  8 ++++
 4 files changed, 157 insertions(+), 45 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index b4842d0e61d..b79d45198d8 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -135,6 +135,6 @@ extern const struct usb_device_id wacom_ids[];
 
 void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
 void wacom_setup_device_quirks(struct wacom_features *features);
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
-				    struct wacom_wac *wacom_wac);
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+				   struct wacom_wac *wacom_wac);
 #endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index be13223793f..86b96f94cd8 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -317,6 +317,10 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
 						}
+
+						if (features->type == MTSCREEN)
+							features->pktlen = WACOM_PKGLEN_MTOUCH;
+
 						if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
@@ -349,18 +353,15 @@ static int wacom_parse_hid(struct usb_interface *intf,
 			case HID_USAGE_Y:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_FINGER;
-						if (features->type == TABLETPC2FG) {
-							/* need to reset back */
-							features->pktlen = WACOM_PKGLEN_TPC2FG;
+						int type = features->type;
+
+						if (type == TABLETPC2FG || type == MTSCREEN) {
 							features->y_max =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
 								get_unaligned_le16(&report[i + 6]);
 							i += 7;
-						} else if (features->type == BAMBOO_PT) {
-							/* need to reset back */
-							features->pktlen = WACOM_PKGLEN_BBTOUCH;
+						} else if (type == BAMBOO_PT) {
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_max =
@@ -374,10 +375,6 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							i += 4;
 						}
 					} else if (pen) {
-						/* penabled only accepts exact bytes of data */
-						if (features->type == TABLETPC2FG)
-							features->pktlen = WACOM_PKGLEN_GRAPHIRE;
-						features->device_type = BTN_TOOL_PEN;
 						features->y_max =
 							get_unaligned_le16(&report[i + 3]);
 						i += 4;
@@ -440,22 +437,29 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 	if (!rep_data)
 		return error;
 
-	/* ask to report tablet data if it is MT Tablet PC or
-	 * not a Tablet PC */
-	if (features->type == TABLETPC2FG) {
-		do {
-			rep_data[0] = 3;
-			rep_data[1] = 4;
-			rep_data[2] = 0;
-			rep_data[3] = 0;
-			report_id = 3;
-			error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
-						 report_id, rep_data, 4, 1);
-			if (error >= 0)
-				error = wacom_get_report(intf,
-						WAC_HID_FEATURE_REPORT,
-						report_id, rep_data, 4, 1);
-		} while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
+	/* ask to report Wacom data */
+	if (features->device_type == BTN_TOOL_FINGER) {
+		/* if it is an MT Tablet PC touch */
+		if (features->type == TABLETPC2FG ||
+		    features->type == MTSCREEN) {
+			do {
+				rep_data[0] = 3;
+				rep_data[1] = 4;
+				rep_data[2] = 0;
+				rep_data[3] = 0;
+				report_id = 3;
+				error = wacom_set_report(intf,
+							 WAC_HID_FEATURE_REPORT,
+							 report_id,
+							 rep_data, 4, 1);
+				if (error >= 0)
+					error = wacom_get_report(intf,
+							WAC_HID_FEATURE_REPORT,
+							report_id,
+							rep_data, 4, 1);
+			} while ((error < 0 || rep_data[1] != 4) &&
+				 limit++ < WAC_MSG_RETRIES);
+		}
 	} else if (features->type != TABLETPC &&
 		   features->type != WIRELESS &&
 		   features->device_type == BTN_TOOL_PEN) {
@@ -477,7 +481,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
 }
 
 static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
-		struct wacom_features *features)
+					 struct wacom_features *features)
 {
 	int error = 0;
 	struct usb_host_interface *interface = intf->cur_altsetting;
@@ -505,10 +509,13 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 		}
 	}
 
-	/* only Tablet PCs and Bamboo P&T need to retrieve the info */
-	if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) &&
-	    (features->type != BAMBOO_PT))
+	/* only devices that support touch need to retrieve the info */
+	if (features->type != TABLETPC &&
+	    features->type != TABLETPC2FG &&
+	    features->type != BAMBOO_PT &&
+	    features->type != MTSCREEN) {
 		goto out;
+	}
 
 	if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
 		if (usb_get_extra_descriptor(&interface->endpoint[0],
@@ -978,8 +985,10 @@ static int wacom_register_input(struct wacom *wacom)
 	int error;
 
 	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
 
 	input_dev->name = wacom_wac->name;
 	input_dev->dev.parent = &intf->dev;
@@ -989,14 +998,20 @@ static int wacom_register_input(struct wacom *wacom)
 	input_set_drvdata(input_dev, wacom);
 
 	wacom_wac->input = input_dev;
-	wacom_setup_input_capabilities(input_dev, wacom_wac);
+	error = wacom_setup_input_capabilities(input_dev, wacom_wac);
+	if (error)
+		goto fail1;
 
 	error = input_register_device(input_dev);
-	if (error) {
-		input_free_device(input_dev);
-		wacom_wac->input = NULL;
-	}
+	if (error)
+		goto fail2;
+
+	return 0;
 
+fail2:
+	input_free_device(input_dev);
+	wacom_wac->input = NULL;
+fail1:
 	return error;
 }
 
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index e5cd0e57d17..10e5cf87035 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -768,6 +768,72 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
+static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
+{
+	int touch_max = wacom->features.touch_max;
+	int i;
+
+	if (!wacom->slots)
+		return -1;
+
+	for (i = 0; i < touch_max; ++i) {
+		if (wacom->slots[i] == contactid)
+			return i;
+	}
+	for (i = 0; i < touch_max; ++i) {
+		if (wacom->slots[i] == -1)
+			return i;
+	}
+	return -1;
+}
+
+static int wacom_mt_touch(struct wacom_wac *wacom)
+{
+	struct input_dev *input = wacom->input;
+	char *data = wacom->data;
+	int i;
+	int current_num_contacts = data[2];
+	int contacts_to_send = 0;
+
+	/*
+	 * First packet resets the counter since only the first
+	 * packet in series will have non-zero current_num_contacts.
+	 */
+	if (current_num_contacts)
+		wacom->num_contacts_left = current_num_contacts;
+
+	/* There are at most 5 contacts per packet */
+	contacts_to_send = min(5, wacom->num_contacts_left);
+
+	for (i = 0; i < contacts_to_send; i++) {
+		int offset = (WACOM_BYTES_PER_MT_PACKET * i) + 3;
+		bool touch = data[offset] & 0x1;
+		int id = le16_to_cpup((__le16 *)&data[offset + 1]);
+		int slot = find_slot_from_contactid(wacom, id);
+
+		if (slot < 0)
+			continue;
+
+		input_mt_slot(input, slot);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			int x = le16_to_cpup((__le16 *)&data[offset + 7]);
+			int y = le16_to_cpup((__le16 *)&data[offset + 9]);
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+		wacom->slots[slot] = touch ? id : -1;
+	}
+
+	input_mt_report_pointer_emulation(input, true);
+
+	wacom->num_contacts_left -= contacts_to_send;
+	if (wacom->num_contacts_left < 0)
+		wacom->num_contacts_left = 0;
+
+	return 1;
+}
+
 static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->input;
@@ -806,6 +872,9 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 	bool prox;
 	int x = 0, y = 0;
 
+	if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
+		return 0;
+
 	if (!wacom->shared->stylus_in_proximity) {
 		if (len == WACOM_PKGLEN_TPC1FG) {
 			prox = data[0] & 0x01;
@@ -873,10 +942,10 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 
 	switch (len) {
 	case WACOM_PKGLEN_TPC1FG:
-		 return wacom_tpc_single_touch(wacom, len);
+		return wacom_tpc_single_touch(wacom, len);
 
 	case WACOM_PKGLEN_TPC2FG:
- 		return wacom_tpc_mt_touch(wacom);
+		return wacom_tpc_mt_touch(wacom);
 
 	default:
 		switch (data[0]) {
@@ -885,6 +954,9 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 		case WACOM_REPORT_TPCST:
 			return wacom_tpc_single_touch(wacom, len);
 
+		case WACOM_REPORT_TPCMT:
+			return wacom_mt_touch(wacom);
+
 		case WACOM_REPORT_PENABLED:
 			return wacom_tpc_pen(wacom);
 		}
@@ -1164,6 +1236,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 
 	case TABLETPC:
 	case TABLETPC2FG:
+	case MTSCREEN:
 		sync = wacom_tpc_irq(wacom_wac, len);
 		break;
 
@@ -1237,7 +1310,8 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 	/* these device have multiple inputs */
 	if (features->type == TABLETPC || features->type == TABLETPC2FG ||
 	    features->type == BAMBOO_PT || features->type == WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOS5L))
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+	    features->type == MTSCREEN)
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1268,8 +1342,8 @@ static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
        return (logical_max * 100) / physical_max;
 }
 
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
-				    struct wacom_wac *wacom_wac)
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+				   struct wacom_wac *wacom_wac)
 {
 	struct wacom_features *features = &wacom_wac->features;
 	int i;
@@ -1465,8 +1539,18 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case TABLETPC2FG:
+	case MTSCREEN:
 		if (features->device_type == BTN_TOOL_FINGER) {
 
+			wacom_wac->slots = kmalloc(features->touch_max *
+							sizeof(int),
+						   GFP_KERNEL);
+			if (!wacom_wac->slots)
+				return -ENOMEM;
+
+			for (i = 0; i < features->touch_max; i++)
+				wacom_wac->slots[i] = -1;
+
 			input_mt_init_slots(input_dev, features->touch_max);
 			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
 					0, MT_TOOL_MAX, 0, 0);
@@ -1552,6 +1636,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		}
 		break;
 	}
+	return 0;
 }
 
 static const struct wacom_features wacom_features_0x00 =
@@ -1784,6 +1869,9 @@ static const struct wacom_features wacom_features_0xE3 =
 	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
 	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
 	  .touch_max = 2 };
+static const struct wacom_features wacom_features_0xE5 =
+	{ "Wacom ISDv4 E5",       WACOM_PKGLEN_MTOUCH,    26202, 16325,  255,
+	  0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xE6 =
 	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
 	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
@@ -1962,6 +2050,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x9F) },
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
+	{ USB_DEVICE_WACOM(0xE5) },
 	{ USB_DEVICE_WACOM(0xE6) },
 	{ USB_DEVICE_WACOM(0xEC) },
 	{ USB_DEVICE_WACOM(0x47) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 321269c1ac4..78fbd3f4200 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,10 @@
 #define WACOM_PKGLEN_BBTOUCH3	64
 #define WACOM_PKGLEN_BBPEN	10
 #define WACOM_PKGLEN_WIRELESS	32
+#define WACOM_PKGLEN_MTOUCH	62
+
+/* wacom data size per MT contact */
+#define WACOM_BYTES_PER_MT_PACKET	11
 
 /* device IDs */
 #define STYLUS_DEVICE_ID	0x02
@@ -41,6 +45,7 @@
 #define WACOM_REPORT_INTUOS5PAD		3
 #define WACOM_REPORT_TPC1FG		6
 #define WACOM_REPORT_TPC2FG		13
+#define WACOM_REPORT_TPCMT		13
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
 
@@ -76,6 +81,7 @@ enum {
 	WACOM_MO,
 	TABLETPC,
 	TABLETPC2FG,
+	MTSCREEN,
 	MAX_TYPE
 };
 
@@ -118,6 +124,8 @@ struct wacom_wac {
 	struct input_dev *input;
 	int pid;
 	int battery_capacity;
+	int num_contacts_left;
+	int *slots;
 };
 
 #endif
-- 
cgit v1.2.3-18-g5258


From 41baf6368ea2c2ad9eca44dbb07490a46202f474 Mon Sep 17 00:00:00 2001
From: Shawn Landden <shawnlandden@gmail.com>
Date: Sun, 29 Apr 2012 22:53:35 -0700
Subject: Input: usbtouchscreen - fix typo

Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ba7c56567ee..148774e03ae 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -756,7 +756,7 @@ config TOUCHSCREEN_USB_EASYTOUCH
 	bool "EasyTouch USB Touch controller device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 	help
-	  Say Y here if you have a EasyTouch USB Touch controller device support.
+	  Say Y here if you have an EasyTouch USB Touch controller.
 	  If unsure, say N.
 
 config TOUCHSCREEN_TOUCHIT213
-- 
cgit v1.2.3-18-g5258


From df052676e534092138f8712c389aa7750d05ba15 Mon Sep 17 00:00:00 2001
From: Shawn Landden <shawnlandden@gmail.com>
Date: Sun, 29 Apr 2012 22:53:35 -0700
Subject: Input: usbtouchscreen - only expose e2i configure option in expert
 mode

as is the case of all other devices supported by usbtouchscreen.c

Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE)

Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 148774e03ae..229135c1dfe 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -647,6 +647,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - Zytronic controllers
 	  - Elo TouchSystems 2700 IntelliTouch
 	  - EasyTouch USB Touch Controller from Data Modul
+	  - e2i (Mimo monitors)
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
@@ -733,7 +734,7 @@ config TOUCHSCREEN_USB_ELO
 
 config TOUCHSCREEN_USB_E2I
 	default y
-	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
+	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ZYTRONIC
-- 
cgit v1.2.3-18-g5258


From eead75a2b4cd635ef2ba399018623358d67343cf Mon Sep 17 00:00:00 2001
From: Ashish Jangam <ashish.jangam@kpitcummins.com>
Date: Sun, 29 Apr 2012 23:33:41 -0700
Subject: Input: add support for DA9052/53 touch screen controller

This driver adds support for DA9052/53 4-wire resistive ADC interfaced
touchscreen controller. DA9052/53 is a multi-function device, therefore
this driver depends on DA9052/53 core.

This patch is functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig      |  17 ++
 drivers/input/touchscreen/Makefile     |   1 +
 drivers/input/touchscreen/da9052_tsi.c | 370 +++++++++++++++++++++++++++++++++
 3 files changed, 388 insertions(+)
 create mode 100644 drivers/input/touchscreen/da9052_tsi.c

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 229135c1dfe..f67657b2fd5 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -187,6 +187,23 @@ config TOUCHSCREEN_DA9034
 	  Say Y here to enable the support for the touchscreen found
 	  on Dialog Semiconductor DA9034 PMIC.
 
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9034-ts.
+
+config TOUCHSCREEN_DA9052
+	tristate "Dialog DA9052/DA9053 TSI"
+	depends on PMIC_DA9052
+	help
+	  Say Y here to support the touchscreen found on Dialog Semiconductor
+	  DA9052-BC and DA9053-AA/Bx PMICs.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9052_tsi.
+
 config TOUCHSCREEN_DYNAPRO
 	tristate "Dynapro serial touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7cca7ddb464..eb8bfe1c1a4 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
new file mode 100644
index 00000000000..e8df341090c
--- /dev/null
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -0,0 +1,370 @@
+/*
+ * TSI driver for Dialog DA9052
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+
+#define TSI_PEN_DOWN_STATUS 0x40
+
+struct da9052_tsi {
+	struct da9052 *da9052;
+	struct input_dev *dev;
+	struct delayed_work ts_pen_work;
+	struct mutex mutex;
+	unsigned int irq_pendwn;
+	unsigned int irq_datardy;
+	bool stopped;
+	bool adc_on;
+};
+
+static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on)
+{
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on);
+	tsi->adc_on = on;
+}
+
+static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	if (!tsi->stopped) {
+		/* Mask PEN_DOWN event and unmask TSI_READY event */
+		disable_irq_nosync(tsi->irq_pendwn);
+		enable_irq(tsi->irq_datardy);
+
+		da9052_ts_adc_toggle(tsi, true);
+
+		schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_read(struct da9052_tsi *tsi)
+{
+	struct input_dev *input = tsi->dev;
+	int ret;
+	u16 x, y, z;
+	u8 v;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG);
+	if (ret < 0)
+		return;
+
+	x = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG);
+	if (ret < 0)
+		return;
+
+	y = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG);
+	if (ret < 0)
+		return;
+
+	z = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+	if (ret < 0)
+		return;
+
+	v = (u8) ret;
+
+	x = ((x << 2) & 0x3fc) | (v & 0x3);
+	y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2);
+	z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4);
+
+	input_report_key(input, BTN_TOUCH, 1);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, z);
+	input_sync(input);
+}
+
+static irqreturn_t da9052_ts_datardy_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	da9052_ts_read(tsi);
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_pen_work(struct work_struct *work)
+{
+	struct da9052_tsi *tsi = container_of(work, struct da9052_tsi,
+					      ts_pen_work.work);
+	if (!tsi->stopped) {
+		int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+		if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) {
+			/* Pen is still DOWN (or read error) */
+			schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+		} else {
+			struct input_dev *input = tsi->dev;
+
+			/* Pen UP */
+			da9052_ts_adc_toggle(tsi, false);
+
+			/* Report Pen UP */
+			input_report_key(input, BTN_TOUCH, 0);
+			input_report_abs(input, ABS_PRESSURE, 0);
+			input_sync(input);
+
+			/*
+			 * FIXME: Fixes the unhandled irq issue when quick
+			 * pen down and pen up events occurs
+			 */
+			ret = da9052_reg_update(tsi->da9052,
+						DA9052_EVENT_B_REG, 0xC0, 0xC0);
+			if (ret < 0)
+				return;
+
+			/* Mask TSI_READY event and unmask PEN_DOWN event */
+			disable_irq(tsi->irq_datardy);
+			enable_irq(tsi->irq_pendwn);
+		}
+	}
+}
+
+static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052)
+{
+	int error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi)
+{
+	int error;
+
+	error = da9052_ts_configure_gpio(tsi->da9052);
+	if (error)
+		return error;
+
+	/* Measure TSI sample every 1ms */
+	error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG,
+				  1 << 6, 1 << 6);
+	if (error < 0)
+		return error;
+
+	/* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */
+	error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0);
+	if (error < 0)
+		return error;
+
+	/* Supply TSIRef through LD09 */
+	error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int da9052_ts_input_open(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = false;
+	mb();
+
+	/* Unmask PEN_DOWN event */
+	enable_irq(tsi->irq_pendwn);
+
+	/* Enable Pen Detect Circuit */
+	return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
+				 1 << 1, 1 << 1);
+}
+
+static void da9052_ts_input_close(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = true;
+	mb();
+	disable_irq(tsi->irq_pendwn);
+	cancel_delayed_work_sync(&tsi->ts_pen_work);
+
+	if (tsi->adc_on) {
+		disable_irq(tsi->irq_datardy);
+		da9052_ts_adc_toggle(tsi, false);
+
+		/*
+		 * If ADC was on that means that pendwn IRQ was disabled
+		 * twice and we need to enable it to keep enable/disable
+		 * counter balanced. IRQ is still off though.
+		 */
+		enable_irq(tsi->irq_pendwn);
+	}
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+}
+
+static int __devinit da9052_ts_probe(struct platform_device *pdev)
+{
+	struct da9052 *da9052;
+	struct da9052_tsi *tsi;
+	struct input_dev *input_dev;
+	int irq_pendwn;
+	int irq_datardy;
+	int error;
+
+	da9052 = dev_get_drvdata(pdev->dev.parent);
+	if (!da9052)
+		return -EINVAL;
+
+	irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
+	irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
+	if (irq_pendwn < 0 || irq_datardy < 0) {
+		dev_err(da9052->dev, "Unable to determine device interrupts\n");
+		return -ENXIO;
+	}
+
+	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tsi || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsi->da9052 = da9052;
+	tsi->dev = input_dev;
+	tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
+	tsi->irq_datardy = da9052->irq_base + irq_datardy;
+	tsi->stopped = true;
+	INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
+
+	input_dev->id.version = 0x0101;
+	input_dev->id.vendor = 0x15B6;
+	input_dev->id.product = 0x9052;
+	input_dev->name = "Dialog DA9052 TouchScreen Driver";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = da9052_ts_input_open;
+	input_dev->close = da9052_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0);
+
+	input_set_drvdata(input_dev, tsi);
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+
+	/* Disable ADC */
+	da9052_ts_adc_toggle(tsi, false);
+
+	error = request_threaded_irq(tsi->irq_pendwn,
+				     NULL, da9052_ts_pendwn_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "PENDWN", tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register PENDWN IRQ %d, error = %d\n",
+			tsi->irq_pendwn, error);
+		goto err_free_mem;
+	}
+
+	error = request_threaded_irq(tsi->irq_datardy,
+				     NULL, da9052_ts_datardy_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "TSIRDY", tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register TSIRDY IRQ %d, error = %d\n",
+			tsi->irq_datardy, error);
+		goto err_free_pendwn_irq;
+	}
+
+	/* Mask PEN_DOWN and TSI_READY events */
+	disable_irq(tsi->irq_pendwn);
+	disable_irq(tsi->irq_datardy);
+
+	error = da9052_configure_tsi(tsi);
+	if (error)
+		goto err_free_datardy_irq;
+
+	error = input_register_device(tsi->dev);
+	if (error)
+		goto err_free_datardy_irq;
+
+	platform_set_drvdata(pdev, tsi);
+
+	return 0;
+
+err_free_datardy_irq:
+	free_irq(tsi->irq_datardy, tsi);
+err_free_pendwn_irq:
+	free_irq(tsi->irq_pendwn, tsi);
+err_free_mem:
+	kfree(tsi);
+	input_free_device(input_dev);
+
+	return error;
+}
+
+static int  __devexit da9052_ts_remove(struct platform_device *pdev)
+{
+	struct da9052_tsi *tsi = platform_get_drvdata(pdev);
+
+	da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
+
+	free_irq(tsi->irq_pendwn, tsi);
+	free_irq(tsi->irq_datardy, tsi);
+
+	input_unregister_device(tsi->dev);
+	kfree(tsi);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver da9052_tsi_driver = {
+	.probe	= da9052_ts_probe,
+	.remove	= __devexit_p(da9052_ts_remove),
+	.driver	= {
+		.name	= "da9052-tsi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(da9052_tsi_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052");
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-tsi");
-- 
cgit v1.2.3-18-g5258


From 0c9e300adec668fd323b0e79c85b9136fccab649 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:38 -0700
Subject: Input: wacom - fix sparse warning

This fixes the following warning from sparse

	warning: Using plain integer as NULL pointer

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 86b96f94cd8..364f2c3432f 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1030,13 +1030,13 @@ static void wacom_wireless_work(struct work_struct *work)
 	wacom = usb_get_intfdata(usbdev->config->interface[1]);
 	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = 0;
+	wacom->wacom_wac.input = NULL;
 
 	/* Touch interface */
 	wacom = usb_get_intfdata(usbdev->config->interface[2]);
 	if (wacom->wacom_wac.input)
 		input_unregister_device(wacom->wacom_wac.input);
-	wacom->wacom_wac.input = 0;
+	wacom->wacom_wac.input = NULL;
 
 	if (wacom_wac->pid == 0) {
 		printk(KERN_INFO "wacom: wireless tablet disconnected\n");
-- 
cgit v1.2.3-18-g5258


From a882c932a628cbab17752fc8b1c94692f95bbf9a Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:38 -0700
Subject: Input: wacom - return proper error if usb_get_extra_descriptor()
 fails

Instead of returning 1 (which is not even negative) let's capture and return
error codde returned by usb_get_extra_descriptor().

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 364f2c3432f..8f3b30b781f 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -517,11 +517,12 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 		goto out;
 	}
 
-	if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
-		if (usb_get_extra_descriptor(&interface->endpoint[0],
-				HID_DEVICET_REPORT, &hid_desc)) {
-			printk("wacom: can not retrieve extra class descriptor\n");
-			error = 1;
+	error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc);
+	if (error) {
+		error = usb_get_extra_descriptor(&interface->endpoint[0],
+						 HID_DEVICET_REPORT, &hid_desc);
+		if (error) {
+			printk(KERN_ERR "wacom: can not retrieve extra class descriptor\n");
 			goto out;
 		}
 	}
-- 
cgit v1.2.3-18-g5258


From eb71d1bb270ef6b2a9c1bfaa7818e1e75b3d4546 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:38 -0700
Subject: Input: wacom - use dev_xxx() instead of naked printk()s and dbg()s

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_sys.c | 15 ++++++++-------
 drivers/input/tablet/wacom_wac.c | 29 +++++++++++++++++++----------
 2 files changed, 27 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 8f3b30b781f..b3a8bd3514b 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -522,7 +522,8 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 		error = usb_get_extra_descriptor(&interface->endpoint[0],
 						 HID_DEVICET_REPORT, &hid_desc);
 		if (error) {
-			printk(KERN_ERR "wacom: can not retrieve extra class descriptor\n");
+			dev_err(&intf->dev,
+				"can not retrieve extra class descriptor\n");
 			goto out;
 		}
 	}
@@ -1040,13 +1041,13 @@ static void wacom_wireless_work(struct work_struct *work)
 	wacom->wacom_wac.input = NULL;
 
 	if (wacom_wac->pid == 0) {
-		printk(KERN_INFO "wacom: wireless tablet disconnected\n");
+		dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
 	} else {
 		const struct usb_device_id *id = wacom_ids;
 
-		printk(KERN_INFO
-		       "wacom: wireless tablet connected with PID %x\n",
-		       wacom_wac->pid);
+		dev_info(&wacom->intf->dev,
+			 "wireless tablet connected with PID %x\n",
+			 wacom_wac->pid);
 
 		while (id->match_flags) {
 			if (id->idVendor == USB_VENDOR_ID_WACOM &&
@@ -1056,8 +1057,8 @@ static void wacom_wireless_work(struct work_struct *work)
 		}
 
 		if (!id->match_flags) {
-			printk(KERN_INFO
-			       "wacom: ignorning unknown PID.\n");
+			dev_info(&wacom->intf->dev,
+				 "ignoring unknown PID.\n");
 			return;
 		}
 
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 10e5cf87035..004bc1bb154 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -61,7 +61,8 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom)
 		break;
 
 	default:
-		printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
         }
 
@@ -76,7 +77,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
 	int prox, pressure;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
 	}
 
@@ -146,7 +148,8 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
 	struct input_dev *input = wacom->input;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		return 0;
 	}
 
@@ -175,7 +178,8 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
 	struct input_dev *input = wacom->input;
 	int prox = data[1] & 0x20, pressure;
 
-	dbg("wacom_dtu_irq: received report #%d", data[0]);
+	dev_dbg(input->dev.parent,
+		"%s: received report #%d", __func__, data[0]);
 
 	if (prox) {
 		/* Going into proximity select tool */
@@ -211,7 +215,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
 		goto exit;
 	}
 
@@ -489,10 +494,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	unsigned int t;
 	int idx = 0, result;
 
-	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
-		&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD
-		&& data[0] != WACOM_REPORT_INTUOS5PAD) {
-		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+	if (data[0] != WACOM_REPORT_PENABLED &&
+	    data[0] != WACOM_REPORT_INTUOSREAD &&
+	    data[0] != WACOM_REPORT_INTUOSWRITE &&
+	    data[0] != WACOM_REPORT_INTUOSPAD &&
+	    data[0] != WACOM_REPORT_INTUOS5PAD) {
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d\n", __func__, data[0]);
                 return 0;
 	}
 
@@ -938,7 +946,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
 
-	dbg("wacom_tpc_irq: received report #%d", data[0]);
+	dev_dbg(wacom->input->dev.parent,
+		"%s: received report #%d\n", __func__, data[0]);
 
 	switch (len) {
 	case WACOM_PKGLEN_TPC1FG:
-- 
cgit v1.2.3-18-g5258


From 46f49b7a223ac7493e7cf619fb583d11edefc2c2 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:38 -0700
Subject: Input: serio_raw - signal EFAULT even if read/write partially
 succeeds

When copy_to/from_user fails in the middle of transfer we should not
report to the user that read/write partially succeeded but rather
report -EFAULT right away, so that application will know that it got
its buffers all wrong.

If application messed up its buffers we can't trust the data fetched
from userspace and successfully written to the device or if data read
from the device and transferred to userspace ended up where application
expected it to end.

If serio_write() fails we still going to report partial writes if failure
happens in the middle of the transfer.

This is basically a revert of 7a0a27d2ce38aee19a31fee8c12095f586eed393
and 4fa0771138d0b56fe59ab8ab3b1ce9e594484362.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/serio_raw.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 3e243621c0e..59df2e7317a 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -165,9 +165,9 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer,
 	struct serio_raw *serio_raw = client->serio_raw;
 	char uninitialized_var(c);
 	ssize_t read = 0;
-	int error = 0;
+	int error;
 
-	do {
+	for (;;) {
 		if (serio_raw->dead)
 			return -ENODEV;
 
@@ -179,24 +179,24 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer,
 			break;
 
 		while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
-			if (put_user(c, buffer++)) {
-				error = -EFAULT;
-				goto out;
-			}
+			if (put_user(c, buffer++))
+				return -EFAULT;
 			read++;
 		}
 
 		if (read)
 			break;
 
-		if (!(file->f_flags & O_NONBLOCK))
+		if (!(file->f_flags & O_NONBLOCK)) {
 			error = wait_event_interruptible(serio_raw->wait,
 					serio_raw->head != serio_raw->tail ||
 					serio_raw->dead);
-	} while (!error);
+			if (error)
+				return error;
+		}
+	}
 
-out:
-	return read ?: error;
+	return read;
 }
 
 static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
@@ -204,8 +204,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
 {
 	struct serio_raw_client *client = file->private_data;
 	struct serio_raw *serio_raw = client->serio_raw;
-	ssize_t written = 0;
-	int retval;
+	int retval = 0;
 	unsigned char c;
 
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
@@ -225,16 +224,20 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
 			retval = -EFAULT;
 			goto out;
 		}
+
 		if (serio_write(serio_raw->serio, c)) {
-			retval = -EIO;
+			/* Either signal error or partial write */
+			if (retval == 0)
+				retval = -EIO;
 			goto out;
 		}
-		written++;
+
+		retval++;
 	}
 
 out:
 	mutex_unlock(&serio_raw_mutex);
-	return written ?: retval;
+	return retval;
 }
 
 static unsigned int serio_raw_poll(struct file *file, poll_table *wait)
-- 
cgit v1.2.3-18-g5258


From f31ad406693f114e57ad4651eb17deb68419c7cb Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Wed, 2 May 2012 00:15:18 -0700
Subject: Input: mpu3050 - set IRQF_ONESHOT when requesting the interrupt

Commit 1c6c695 "genirq: Reject bogus threaded irq requests" requires
that request_threaded_irq() either be passed an explicit handler, or
that IRQF_ONESHOT be set. Set this flag.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/mpu3050.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 5403c571b6a..306f84c2d8f 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -367,7 +367,7 @@ static int __devinit mpu3050_probe(struct i2c_client *client,
 
 	error = request_threaded_irq(client->irq,
 				     NULL, mpu3050_interrupt_thread,
-				     IRQF_TRIGGER_RISING,
+				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 				     "mpu3050", sensor);
 	if (error) {
 		dev_err(&client->dev,
-- 
cgit v1.2.3-18-g5258


From dba4258068f822b7dafc78c28fe9c99c551eca7e Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:36 -0700
Subject: Input: evdev - properly access RCU-protected 'grab' data

We should use rcu_dereference_protected() when checking if given client
is the one that grabbed the device. This fixes warnings produced by
sparse.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/evdev.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 4b2e10d5d64..9226b4d9118 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -180,7 +180,10 @@ static int evdev_grab(struct evdev *evdev, struct evdev_client *client)
 
 static int evdev_ungrab(struct evdev *evdev, struct evdev_client *client)
 {
-	if (evdev->grab != client)
+	struct evdev_client *grab = rcu_dereference_protected(evdev->grab,
+					lockdep_is_held(&evdev->mutex));
+
+	if (grab != client)
 		return  -EINVAL;
 
 	rcu_assign_pointer(evdev->grab, NULL);
@@ -259,8 +262,7 @@ static int evdev_release(struct inode *inode, struct file *file)
 	struct evdev *evdev = client->evdev;
 
 	mutex_lock(&evdev->mutex);
-	if (evdev->grab == client)
-		evdev_ungrab(evdev, client);
+	evdev_ungrab(evdev, client);
 	mutex_unlock(&evdev->mutex);
 
 	evdev_detach_client(evdev, client);
-- 
cgit v1.2.3-18-g5258


From 2872a9b521ac936c7a8525a8c2bdfb9b4ccf5cfc Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 2 May 2012 00:13:37 -0700
Subject: Input: evdev - properly handle read/write with count 0

According to the standard count 0 is special - no IO should happen but we
can check error conditions (device gone away, etc), and return 0 if there
are no errors. We used to return -EINVAL instead and we also could return 0
if an event was "stolen" by another thread.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/evdev.c | 61 ++++++++++++++++++++++++++++++++-------------------
 1 file changed, 38 insertions(+), 23 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 9226b4d9118..6c58bfff01a 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -345,7 +345,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 	struct input_event event;
 	int retval = 0;
 
-	if (count < input_event_size())
+	if (count != 0 && count < input_event_size())
 		return -EINVAL;
 
 	retval = mutex_lock_interruptible(&evdev->mutex);
@@ -357,7 +357,8 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 		goto out;
 	}
 
-	do {
+	while (retval + input_event_size() <= count) {
+
 		if (input_event_from_user(buffer + retval, &event)) {
 			retval = -EFAULT;
 			goto out;
@@ -366,7 +367,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 
 		input_inject_event(&evdev->handle,
 				   event.type, event.code, event.value);
-	} while (retval + input_event_size() <= count);
+	}
 
  out:
 	mutex_unlock(&evdev->mutex);
@@ -397,35 +398,49 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
 	struct input_event event;
-	int retval = 0;
+	size_t read = 0;
+	int error;
 
-	if (count < input_event_size())
+	if (count != 0 && count < input_event_size())
 		return -EINVAL;
 
-	if (!(file->f_flags & O_NONBLOCK)) {
-		retval = wait_event_interruptible(evdev->wait,
-				client->packet_head != client->tail ||
-				!evdev->exist);
-		if (retval)
-			return retval;
-	}
+	for (;;) {
+		if (!evdev->exist)
+			return -ENODEV;
 
-	if (!evdev->exist)
-		return -ENODEV;
+		if (client->packet_head == client->tail &&
+		    (file->f_flags & O_NONBLOCK))
+			return -EAGAIN;
+
+		/*
+		 * count == 0 is special - no IO is done but we check
+		 * for error conditions (see above).
+		 */
+		if (count == 0)
+			break;
 
-	while (retval + input_event_size() <= count &&
-	       evdev_fetch_next_event(client, &event)) {
+		while (read + input_event_size() <= count &&
+		       evdev_fetch_next_event(client, &event)) {
 
-		if (input_event_to_user(buffer + retval, &event))
-			return -EFAULT;
+			if (input_event_to_user(buffer + read, &event))
+				return -EFAULT;
 
-		retval += input_event_size();
-	}
+			read += input_event_size();
+		}
 
-	if (retval == 0 && (file->f_flags & O_NONBLOCK))
-		return -EAGAIN;
+		if (read)
+			break;
 
-	return retval;
+		if (!(file->f_flags & O_NONBLOCK)) {
+			error = wait_event_interruptible(evdev->wait,
+					client->packet_head != client->tail ||
+					!evdev->exist);
+			if (error)
+				return error;
+		}
+	}
+
+	return read;
 }
 
 /* No kernel lock - fine */
-- 
cgit v1.2.3-18-g5258


From 9ac7b1a36c729ce88eee7370da3c9992d7b40590 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 7 May 2012 08:45:50 -0700
Subject: Input: tl6040-vibra - Device Tree support

Enable DT based probing of the vibra driver.

Example of dts section to load the twl6040-vibra driver:
twl6040: twl6040@4b {
	...
	twl6040_vibra: twl6040@1 {
		compatible = "ti,twl6040-vibra";
		interrupts = <4>;
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;
		vibldrv_res = <8>;
		vibrdrv_res = <3>;
		viblmotor_res = <10>;
		vibrmotor_res = <10>;
	};
};

[Sasha Levin <levinsasha928@gmail.com>: fixed build error]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/twl6040-vibra.c | 46 +++++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 14e94f56cb7..c34f6c0371c 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -27,6 +27,7 @@
  */
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
 #include <linux/mfd/twl6040.h>
@@ -258,10 +259,13 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
 static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 {
 	struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
+	struct device_node *node = pdev->dev.of_node;
 	struct vibra_info *info;
+	int vddvibl_uV = 0;
+	int vddvibr_uV = 0;
 	int ret;
 
-	if (!pdata) {
+	if (!pdata && !node) {
 		dev_err(&pdev->dev, "platform_data not available\n");
 		return -EINVAL;
 	}
@@ -273,11 +277,26 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 	}
 
 	info->dev = &pdev->dev;
+
 	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
-	info->vibldrv_res = pdata->vibldrv_res;
-	info->vibrdrv_res = pdata->vibrdrv_res;
-	info->viblmotor_res = pdata->viblmotor_res;
-	info->vibrmotor_res = pdata->vibrmotor_res;
+	if (pdata) {
+		info->vibldrv_res = pdata->vibldrv_res;
+		info->vibrdrv_res = pdata->vibrdrv_res;
+		info->viblmotor_res = pdata->viblmotor_res;
+		info->vibrmotor_res = pdata->vibrmotor_res;
+		vddvibl_uV = pdata->vddvibl_uV;
+		vddvibr_uV = pdata->vddvibr_uV;
+	} else {
+		of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
+		of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
+		of_property_read_u32(node, "viblmotor_res",
+				     &info->viblmotor_res);
+		of_property_read_u32(node, "vibrmotor_res",
+				     &info->vibrmotor_res);
+		of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
+		of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
+	}
+
 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
@@ -339,10 +358,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		goto err_regulator;
 	}
 
-	if (pdata->vddvibl_uV) {
+	if (vddvibl_uV) {
 		ret = regulator_set_voltage(info->supplies[0].consumer,
-					    pdata->vddvibl_uV,
-					    pdata->vddvibl_uV);
+					    vddvibl_uV, vddvibl_uV);
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
 				ret);
@@ -350,10 +368,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (pdata->vddvibr_uV) {
+	if (vddvibr_uV) {
 		ret = regulator_set_voltage(info->supplies[1].consumer,
-					    pdata->vddvibr_uV,
-					    pdata->vddvibr_uV);
+					    vddvibr_uV, vddvibr_uV);
 		if (ret) {
 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
 				ret);
@@ -401,6 +418,12 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id twl6040_vibra_of_match[] = {
+	{.compatible = "ti,twl6040-vibra", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
+
 static struct platform_driver twl6040_vibra_driver = {
 	.probe		= twl6040_vibra_probe,
 	.remove		= __devexit_p(twl6040_vibra_remove),
@@ -408,6 +431,7 @@ static struct platform_driver twl6040_vibra_driver = {
 		.name	= "twl6040-vibra",
 		.owner	= THIS_MODULE,
 		.pm	= &twl6040_vibra_pm_ops,
+		.of_match_table = twl6040_vibra_of_match,
 	},
 };
 module_platform_driver(twl6040_vibra_driver);
-- 
cgit v1.2.3-18-g5258


From d3132c5c95507d570987712d037d184c637171bb Mon Sep 17 00:00:00 2001
From: Tai-hwa Liang <avatar@sentelic.com>
Date: Mon, 7 May 2012 08:45:58 -0700
Subject: Input: sentelic - report device's production serial number

Hardware since Cx supports an unique identity (used to identify OEM vendors
and released lot number) which is very helpful for diagnostic purpose.
This revision tries to make it as a part of driver boot up message.

Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of
absolute coordinates output.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/sentelic.c | 34 ++++++++++++++++++++++++++++++----
 drivers/input/mouse/sentelic.h |  8 ++++++++
 2 files changed, 38 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 661a0ca3b3d..3f5649f1908 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -41,7 +41,7 @@
 #define	GET_ABS_Y(packet)	((packet[2] << 2) | (packet[3] & 0x03))
 
 /** Driver version. */
-static const char fsp_drv_ver[] = "1.0.0-K";
+static const char fsp_drv_ver[] = "1.1.0-K";
 
 /*
  * Make sure that the value being sent to FSP will not conflict with
@@ -303,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev)
 	return 0;
 }
 
+static int fsp_get_sn(struct psmouse *psmouse, int *sn)
+{
+	int v0, v1, v2;
+	int rc = -EIO;
+
+	/* production number since Cx is available at: 0x0b40 ~ 0x0b42 */
+	if (fsp_page_reg_write(psmouse, FSP_PAGE_0B))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1))
+		goto out;
+	if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2))
+		goto out;
+	*sn = (v0 << 16) | (v1 << 8) | v2;
+	rc = 0;
+out:
+	fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT);
+	return rc;
+}
+
 static int fsp_get_buttons(struct psmouse *psmouse, int *btn)
 {
 	static const int buttons[] = {
@@ -1000,16 +1021,21 @@ static int fsp_reconnect(struct psmouse *psmouse)
 int fsp_init(struct psmouse *psmouse)
 {
 	struct fsp_data *priv;
-	int ver, rev;
+	int ver, rev, sn = 0;
 	int error;
 
 	if (fsp_get_version(psmouse, &ver) ||
 	    fsp_get_revision(psmouse, &rev)) {
 		return -ENODEV;
 	}
+	if (ver >= FSP_VER_STL3888_C0) {
+		/* firmware information is only available since C0 */
+		fsp_get_sn(psmouse, &sn);
+	}
 
-	psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n",
-		     ver >> 4, ver & 0x0F, rev, fsp_drv_ver);
+	psmouse_info(psmouse,
+		     "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n",
+		     ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver);
 
 	psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
 	if (!priv)
diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h
index 334de19e5dd..aa697ece405 100644
--- a/drivers/input/mouse/sentelic.h
+++ b/drivers/input/mouse/sentelic.h
@@ -65,6 +65,14 @@
 #define	FSP_BIT_SWC1_GST_GRP1	BIT(6)
 #define	FSP_BIT_SWC1_BX_COMPAT	BIT(7)
 
+#define	FSP_PAGE_0B		(0x0b)
+#define	FSP_PAGE_82		(0x82)
+#define	FSP_PAGE_DEFAULT	FSP_PAGE_82
+
+#define	FSP_REG_SN0		(0x40)
+#define	FSP_REG_SN1		(0x41)
+#define	FSP_REG_SN2		(0x42)
+
 /* Finger-sensing Pad packet formating related definitions */
 
 /* absolute packet type */
-- 
cgit v1.2.3-18-g5258


From 3a73c8169e4f56c1161a95985b8489dd04a7bcbe Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Tue, 8 May 2012 22:29:14 -0700
Subject: Input: atmel_mxt_ts - use CONFIG_PM_SLEEP

Simple cleanup to use newer PM APIs.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 19d4ea65ea0..0a6e368a5a9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1201,7 +1201,7 @@ static int __devexit mxt_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int mxt_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -1239,13 +1239,10 @@ static int mxt_resume(struct device *dev)
 
 	return 0;
 }
-
-static const struct dev_pm_ops mxt_pm_ops = {
-	.suspend	= mxt_suspend,
-	.resume		= mxt_resume,
-};
 #endif
 
+static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
@@ -1258,9 +1255,7 @@ static struct i2c_driver mxt_driver = {
 	.driver = {
 		.name	= "atmel_mxt_ts",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &mxt_pm_ops,
-#endif
 	},
 	.probe		= mxt_probe,
 	.remove		= __devexit_p(mxt_remove),
-- 
cgit v1.2.3-18-g5258


From 71b3e938cb97f6cf324fb5aaca46d8e400dc38f0 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Tue, 8 May 2012 22:30:14 -0700
Subject: Input: atmel_mxt_ts - only allow root to update firmware

Restrict permissions on the update_fw sysfs entry to read only for root
only.

Also, update object permission to use a macro S_IRUGO macro instead of
hard coded 0444.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 0a6e368a5a9..15ae6fd575b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1049,8 +1049,8 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(object, 0444, mxt_object_show, NULL);
-static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
 
 static struct attribute *mxt_attrs[] = {
 	&dev_attr_object.attr,
-- 
cgit v1.2.3-18-g5258


From d1ff320f0a9766a53ae412d96f72bd861a889af6 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Tue, 8 May 2012 22:38:52 -0700
Subject: Input: atmel_mxt_ts - verify object size in mxt_write_object

Don't allow writing past the length of an object.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 15ae6fd575b..8f0dc7776e7 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -506,7 +506,7 @@ static int mxt_write_object(struct mxt_data *data,
 	u16 reg;
 
 	object = mxt_get_object(data, type);
-	if (!object)
+	if (!object || offset >= object->size + 1)
 		return -EINVAL;
 
 	reg = object->start_address;
-- 
cgit v1.2.3-18-g5258


From 822115ff4bd7141a6069dcc17b35dfd823a44dff Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Tue, 8 May 2012 22:40:26 -0700
Subject: Input: atmel_mxt_ts - do not read extra (checksum) byte

atmel_mxt devices will send a checksum byte at the end of a message if
the MSB of the object address is set.
However, since this driver does not set this bit, the checksum byte
isn't actually sent, so don't even try to read it.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8f0dc7776e7..12a6ba2792a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -236,7 +236,6 @@ struct mxt_object {
 struct mxt_message {
 	u8 reportid;
 	u8 message[7];
-	u8 checksum;
 };
 
 struct mxt_finger {
@@ -336,7 +335,6 @@ static void mxt_dump_message(struct device *dev,
 	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
 	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
 	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
-	dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
 }
 
 static int mxt_check_bootloader(struct i2c_client *client,
-- 
cgit v1.2.3-18-g5258


From 6ee3dbf93a895fce7c11d4d79e12beab1beb7860 Mon Sep 17 00:00:00 2001
From: Daniel Kurtz <djkurtz@chromium.org>
Date: Tue, 8 May 2012 22:40:29 -0700
Subject: Input: atmel_mxt_ts - dump each message on just 1 line

Helps ensure all bytes for a single message together in the system log.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 12a6ba2792a..42e645062c2 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -325,16 +325,12 @@ static bool mxt_object_writable(unsigned int type)
 }
 
 static void mxt_dump_message(struct device *dev,
-				  struct mxt_message *message)
+			     struct mxt_message *message)
 {
-	dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
-	dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
-	dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
-	dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
-	dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
-	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
-	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
-	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
+	dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n",
+		message->reportid, message->message[0], message->message[1],
+		message->message[2], message->message[3], message->message[4],
+		message->message[5], message->message[6]);
 }
 
 static int mxt_check_bootloader(struct i2c_client *client,
-- 
cgit v1.2.3-18-g5258


From ae99ea562be0a788ccb583aff21f3d2147de531f Mon Sep 17 00:00:00 2001
From: Paul Parsons <lost.distance@yahoo.com>
Date: Thu, 10 May 2012 22:11:51 -0700
Subject: Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver

This driver adds support for the Synaptics NavPoint touchpad connected
to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
a tap or tap-and-a-half drag gesture emulates the left mouse button.
For example, use the xf86-input-evdev driver for an X pointing device.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/Kconfig    |  12 ++
 drivers/input/mouse/Makefile   |   1 +
 drivers/input/mouse/navpoint.c | 369 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 382 insertions(+)
 create mode 100644 drivers/input/mouse/navpoint.c

(limited to 'drivers')

diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 9b8db821d5f..cd6268cf7cd 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -339,4 +339,16 @@ config MOUSE_SYNAPTICS_USB
 	  To compile this driver as a module, choose M here: the
 	  module will be called synaptics_usb.
 
+config MOUSE_NAVPOINT_PXA27x
+	tristate "Synaptics NavPoint (PXA27x SSP/SPI)"
+	depends on PXA27x && PXA_SSP
+	help
+	  This driver adds support for the Synaptics NavPoint touchpad connected
+	  to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
+	  a tap or tap-and-a-half drag gesture emulates the left mouse button.
+	  For example, use the xf86-input-evdev driver for an X pointing device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called navpoint.
+
 endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 4718effeb8d..46ba7556fd4 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
 obj-$(CONFIG_MOUSE_LOGIBM)		+= logibm.o
 obj-$(CONFIG_MOUSE_MAPLE)		+= maplemouse.o
+obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x)	+= navpoint.o
 obj-$(CONFIG_MOUSE_PC110PAD)		+= pc110pad.o
 obj-$(CONFIG_MOUSE_PS2)			+= psmouse.o
 obj-$(CONFIG_MOUSE_PXA930_TRKBALL)	+= pxa930_trkball.o
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
new file mode 100644
index 00000000000..c29ae7654d5
--- /dev/null
+++ b/drivers/input/mouse/navpoint.c
@@ -0,0 +1,369 @@
+/*
+ * Synaptics NavPoint (PXA27x SSP/SPI) driver.
+ *
+ * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/navpoint.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/slab.h>
+
+/*
+ * Synaptics Modular Embedded Protocol: Module Packet Format.
+ * Module header byte 2:0 = Length (# bytes that follow)
+ * Module header byte 4:3 = Control
+ * Module header byte 7:5 = Module Address
+ */
+#define HEADER_LENGTH(byte)	((byte) & 0x07)
+#define HEADER_CONTROL(byte)	(((byte) >> 3) & 0x03)
+#define HEADER_ADDRESS(byte)	((byte) >> 5)
+
+struct navpoint {
+	struct ssp_device	*ssp;
+	struct input_dev	*input;
+	struct device		*dev;
+	int			gpio;
+	int			index;
+	u8			data[1 + HEADER_LENGTH(0xff)];
+};
+
+/*
+ * Initialization values for SSCR0_x, SSCR1_x, SSSR_x.
+ */
+static const u32 sscr0 = 0
+	| SSCR0_TUM		/* TIM = 1; No TUR interrupts */
+	| SSCR0_RIM		/* RIM = 1; No ROR interrupts */
+	| SSCR0_SSE		/* SSE = 1; SSP enabled */
+	| SSCR0_Motorola	/* FRF = 0; Motorola SPI */
+	| SSCR0_DataSize(16)	/* DSS = 15; Data size = 16-bit */
+	;
+static const u32 sscr1 = 0
+	| SSCR1_SCFR		/* SCFR = 1; SSPSCLK only during transfers */
+	| SSCR1_SCLKDIR		/* SCLKDIR = 1; Slave mode */
+	| SSCR1_SFRMDIR		/* SFRMDIR = 1; Slave mode */
+	| SSCR1_RWOT		/* RWOT = 1; Receive without transmit mode */
+	| SSCR1_RxTresh(1)	/* RFT = 0; Receive FIFO threshold = 1 */
+	| SSCR1_SPH		/* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */
+	| SSCR1_RIE		/* RIE = 1; Receive FIFO interrupt enabled */
+	;
+static const u32 sssr = 0
+	| SSSR_BCE		/* BCE = 1; Clear BCE */
+	| SSSR_TUR		/* TUR = 1; Clear TUR */
+	| SSSR_EOC		/* EOC = 1; Clear EOC */
+	| SSSR_TINT		/* TINT = 1; Clear TINT */
+	| SSSR_PINT		/* PINT = 1; Clear PINT */
+	| SSSR_ROR		/* ROR = 1; Clear ROR */
+	;
+
+/*
+ * MEP Query $22: Touchpad Coordinate Range Query is not supported by
+ * the NavPoint module, so sampled values provide the default limits.
+ */
+#define NAVPOINT_X_MIN		1278
+#define NAVPOINT_X_MAX		5340
+#define NAVPOINT_Y_MIN		1572
+#define NAVPOINT_Y_MAX		4396
+#define NAVPOINT_PRESSURE_MIN	0
+#define NAVPOINT_PRESSURE_MAX	255
+
+static void navpoint_packet(struct navpoint *navpoint)
+{
+	int finger;
+	int gesture;
+	int x, y, z;
+
+	switch (navpoint->data[0]) {
+	case 0xff:	/* Garbage (packet?) between reset and Hello packet */
+	case 0x00:	/* Module 0, NULL packet */
+		break;
+
+	case 0x0e:	/* Module 0, Absolute packet */
+		finger = (navpoint->data[1] & 0x01);
+		gesture = (navpoint->data[1] & 0x02);
+		x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3];
+		y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5];
+		z = navpoint->data[6];
+		input_report_key(navpoint->input, BTN_TOUCH, finger);
+		input_report_abs(navpoint->input, ABS_X, x);
+		input_report_abs(navpoint->input, ABS_Y, y);
+		input_report_abs(navpoint->input, ABS_PRESSURE, z);
+		input_report_key(navpoint->input, BTN_TOOL_FINGER, finger);
+		input_report_key(navpoint->input, BTN_LEFT, gesture);
+		input_sync(navpoint->input);
+		break;
+
+	case 0x19:	/* Module 0, Hello packet */
+		if ((navpoint->data[1] & 0xf0) == 0x10)
+			break;
+		/* FALLTHROUGH */
+	default:
+		dev_warn(navpoint->dev,
+			 "spurious packet: data=0x%02x,0x%02x,...\n",
+			 navpoint->data[0], navpoint->data[1]);
+		break;
+	}
+}
+
+static irqreturn_t navpoint_irq(int irq, void *dev_id)
+{
+	struct navpoint *navpoint = dev_id;
+	struct ssp_device *ssp = navpoint->ssp;
+	irqreturn_t ret = IRQ_NONE;
+	u32 status;
+
+	status = pxa_ssp_read_reg(ssp, SSSR);
+	if (status & sssr) {
+		dev_warn(navpoint->dev,
+			 "unexpected interrupt: status=0x%08x\n", status);
+		pxa_ssp_write_reg(ssp, SSSR, (status & sssr));
+		ret = IRQ_HANDLED;
+	}
+
+	while (status & SSSR_RNE) {
+		u32 data;
+
+		data = pxa_ssp_read_reg(ssp, SSDR);
+		navpoint->data[navpoint->index + 0] = (data >> 8);
+		navpoint->data[navpoint->index + 1] = data;
+		navpoint->index += 2;
+		if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) {
+			navpoint_packet(navpoint);
+			navpoint->index = 0;
+		}
+		status = pxa_ssp_read_reg(ssp, SSSR);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static void navpoint_up(struct navpoint *navpoint)
+{
+	struct ssp_device *ssp = navpoint->ssp;
+	int timeout;
+
+	clk_prepare_enable(ssp->clk);
+
+	pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+	pxa_ssp_write_reg(ssp, SSSR, sssr);
+	pxa_ssp_write_reg(ssp, SSTO, 0);
+	pxa_ssp_write_reg(ssp, SSCR0, sscr0);	/* SSCR0_SSE written last */
+
+	/* Wait until SSP port is ready for slave clock operations */
+	for (timeout = 100; timeout != 0; --timeout) {
+		if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS))
+			break;
+		msleep(1);
+	}
+
+	if (timeout == 0)
+		dev_err(navpoint->dev,
+			"timeout waiting for SSSR[CSS] to clear\n");
+
+	if (gpio_is_valid(navpoint->gpio))
+		gpio_set_value(navpoint->gpio, 1);
+}
+
+static void navpoint_down(struct navpoint *navpoint)
+{
+	struct ssp_device *ssp = navpoint->ssp;
+
+	if (gpio_is_valid(navpoint->gpio))
+		gpio_set_value(navpoint->gpio, 0);
+
+	pxa_ssp_write_reg(ssp, SSCR0, 0);
+
+	clk_disable_unprepare(ssp->clk);
+}
+
+static int navpoint_open(struct input_dev *input)
+{
+	struct navpoint *navpoint = input_get_drvdata(input);
+
+	navpoint_up(navpoint);
+
+	return 0;
+}
+
+static void navpoint_close(struct input_dev *input)
+{
+	struct navpoint *navpoint = input_get_drvdata(input);
+
+	navpoint_down(navpoint);
+}
+
+static int __devinit navpoint_probe(struct platform_device *pdev)
+{
+	const struct navpoint_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct ssp_device *ssp;
+	struct input_dev *input;
+	struct navpoint *navpoint;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	if (gpio_is_valid(pdata->gpio)) {
+		error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW,
+					 "SYNAPTICS_ON");
+		if (error)
+			return error;
+	}
+
+	ssp = pxa_ssp_request(pdata->port, pdev->name);
+	if (!ssp) {
+		error = -ENODEV;
+		goto err_free_gpio;
+	}
+
+	/* HaRET does not disable devices before jumping into Linux */
+	if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
+		pxa_ssp_write_reg(ssp, SSCR0, 0);
+		dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port);
+	}
+
+	navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!navpoint || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	navpoint->ssp = ssp;
+	navpoint->input = input;
+	navpoint->dev = &pdev->dev;
+	navpoint->gpio = pdata->gpio;
+
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+	input_set_abs_params(input, ABS_X,
+			     NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0);
+	input_set_abs_params(input, ABS_Y,
+			     NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX,
+			     0, 0);
+
+	input->open = navpoint_open;
+	input->close = navpoint_close;
+
+	input_set_drvdata(input, navpoint);
+
+	error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint);
+	if (error)
+		goto err_free_mem;
+
+	error = input_register_device(input);
+	if (error)
+		goto err_free_irq;
+
+	platform_set_drvdata(pdev, navpoint);
+	dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq);
+
+	return 0;
+
+err_free_irq:
+	free_irq(ssp->irq, &pdev->dev);
+err_free_mem:
+	input_free_device(input);
+	kfree(navpoint);
+	pxa_ssp_free(ssp);
+err_free_gpio:
+	if (gpio_is_valid(pdata->gpio))
+		gpio_free(pdata->gpio);
+
+	return error;
+}
+
+static int __devexit navpoint_remove(struct platform_device *pdev)
+{
+	const struct navpoint_platform_data *pdata =
+					dev_get_platdata(&pdev->dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct ssp_device *ssp = navpoint->ssp;
+
+	free_irq(ssp->irq, navpoint);
+
+	input_unregister_device(navpoint->input);
+	kfree(navpoint);
+
+	pxa_ssp_free(ssp);
+
+	if (gpio_is_valid(pdata->gpio))
+		gpio_free(pdata->gpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int navpoint_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct input_dev *input = navpoint->input;
+
+	mutex_lock(&input->mutex);
+	if (input->users)
+		navpoint_down(navpoint);
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static int navpoint_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct navpoint *navpoint = platform_get_drvdata(pdev);
+	struct input_dev *input = navpoint->input;
+
+	mutex_lock(&input->mutex);
+	if (input->users)
+		navpoint_up(navpoint);
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);
+
+static struct platform_driver navpoint_driver = {
+	.probe		= navpoint_probe,
+	.remove		= __devexit_p(navpoint_remove),
+	.driver = {
+		.name	= "navpoint",
+		.owner	= THIS_MODULE,
+		.pm	= &navpoint_pm_ops,
+	},
+};
+
+module_platform_driver(navpoint_driver);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:navpoint");
-- 
cgit v1.2.3-18-g5258


From 3b7e09fad9582df27fd72edd018a9c59d085f896 Mon Sep 17 00:00:00 2001
From: George Pantalos <gpantalos@gmail.com>
Date: Thu, 10 May 2012 22:31:59 -0700
Subject: Input: ALPS - add semi-MT support for v4 protocol

This patch adds semi-MT support for ALPS v4 protocol touchpads.
It is based on the work by Seth Forshee for ALPS v3 and v4 protocol
support. Three packets are required to assemble and process the MT
data. ST events are reported at once to avoid latency. If there
were two contacts or more, report MT data instead of ST events.

Thanks to Seth Forshee for providing most of the code, guidance
and insight for producing this patch.

Signed-off-by: George Pantalos <gpantalos@gmail.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c | 79 ++++++++++++++++++++++++++++++++++++++++++----
 drivers/input/mouse/alps.h |  2 ++
 2 files changed, 75 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 4c6a72d3d48..ecd93894c80 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -604,10 +604,54 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
 
 static void alps_process_packet_v4(struct psmouse *psmouse)
 {
+	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
+	int offset;
 	int x, y, z;
 	int left, right;
+	int x1, y1, x2, y2;
+	int fingers = 0;
+	unsigned int x_bitmap, y_bitmap;
+
+	/*
+	 * v4 has a 6-byte encoding for bitmap data, but this data is
+	 * broken up between 3 normal packets. Use priv->multi_packet to
+	 * track our position in the bitmap packet.
+	 */
+	if (packet[6] & 0x40) {
+		/* sync, reset position */
+		priv->multi_packet = 0;
+	}
+
+	if (WARN_ON_ONCE(priv->multi_packet > 2))
+		return;
+
+	offset = 2 * priv->multi_packet;
+	priv->multi_data[offset] = packet[6];
+	priv->multi_data[offset + 1] = packet[7];
+
+	if (++priv->multi_packet > 2) {
+		priv->multi_packet = 0;
+
+		x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
+			   ((priv->multi_data[3] & 0x60) << 3) |
+			   ((priv->multi_data[0] & 0x3f) << 2) |
+			   ((priv->multi_data[1] & 0x60) >> 5);
+		y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
+			   ((priv->multi_data[3] & 0x1f) << 5) |
+			    (priv->multi_data[1] & 0x1f);
+
+		fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+					      &x1, &y1, &x2, &y2);
+
+		/* Store MT data.*/
+		priv->fingers = fingers;
+		priv->x1 = x1;
+		priv->x2 = x2;
+		priv->y1 = y1;
+		priv->y2 = y2;
+	}
 
 	left = packet[4] & 0x01;
 	right = packet[4] & 0x02;
@@ -617,21 +661,44 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
 	y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
 	z = packet[5] & 0x7f;
 
+	/*
+	 * If there were no contacts in the bitmap, use ST
+	 * points in MT reports.
+	 * If there were two contacts or more, report MT data.
+	 */
+	if (priv->fingers < 2) {
+		x1 = x;
+		y1 = y;
+		fingers = z > 0 ? 1 : 0;
+	} else {
+		fingers = priv->fingers;
+		x1 = priv->x1;
+		x2 = priv->x2;
+		y1 = priv->y1;
+		y2 = priv->y2;
+	}
+
 	if (z >= 64)
 		input_report_key(dev, BTN_TOUCH, 1);
 	else
 		input_report_key(dev, BTN_TOUCH, 0);
 
+	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+
 	if (z > 0) {
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
 	}
 	input_report_abs(dev, ABS_PRESSURE, z);
 
-	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
-
 	input_sync(dev);
 }
 
@@ -1557,6 +1624,7 @@ int alps_init(struct psmouse *psmouse)
 		input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
 		break;
 	case ALPS_PROTO_V3:
+	case ALPS_PROTO_V4:
 		set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
 		input_mt_init_slots(dev1, 2);
 		input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
@@ -1565,8 +1633,7 @@ int alps_init(struct psmouse *psmouse)
 		set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
 		set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
 		set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
-		/* fall through */
-	case ALPS_PROTO_V4:
+
 		input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
 		input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
 		break;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index a00a4ab92a0..ae1ac354c77 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -39,6 +39,8 @@ struct alps_data {
 	int prev_fin;			/* Finger bit from previous packet */
 	int multi_packet;		/* Multi-packet data in progress */
 	unsigned char multi_data[6];	/* Saved multi-packet data */
+	int x1, x2, y1, y2;		/* Coordinates from last MT report */
+	int fingers;			/* Number of fingers from MT report */
 	u8 quirks;
 	struct timer_list timer;
 };
-- 
cgit v1.2.3-18-g5258


From 616575c2d2460a9b7868f41901f3b0f6e1451f31 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 10 May 2012 22:31:59 -0700
Subject: Input: ALPS - switch to using input_mt_report_finger_count

Instead of open-coded reporting number of fingers on the touchpad
let's use input_mt_report_finger_count() helper.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index ecd93894c80..4a1347e91bd 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -553,10 +553,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 
 	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 
-	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
-	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
-	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
-	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+	input_mt_report_finger_count(dev, fingers);
 
 	input_report_key(dev, BTN_LEFT, left);
 	input_report_key(dev, BTN_RIGHT, right);
@@ -685,10 +682,7 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
 
 	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 
-	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
-	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
-	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
-	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+	input_mt_report_finger_count(dev, fingers);
 
 	input_report_key(dev, BTN_LEFT, left);
 	input_report_key(dev, BTN_RIGHT, right);
-- 
cgit v1.2.3-18-g5258


From 1a49a0a04d13049ac4f90d2e61da9b29a36962f7 Mon Sep 17 00:00:00 2001
From: JJ Ding <dgdunix@gmail.com>
Date: Thu, 10 May 2012 22:32:00 -0700
Subject: Input: synaptics - fix compile warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of
a compile warning when we don't select synaptics support.

drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function]

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/synaptics.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 8081a0a5d60..c778f27a59f 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -45,16 +45,6 @@
 #define YMIN_NOMINAL 1408
 #define YMAX_NOMINAL 4448
 
-/*
- * Synaptics touchpads report the y coordinate from bottom to top, which is
- * opposite from what userspace expects.
- * This function is used to invert y before reporting.
- */
-static int synaptics_invert_y(int y)
-{
-	return YMAX_NOMINAL + YMIN_NOMINAL - y;
-}
-
 
 /*****************************************************************************
  *	Stuff we need even when we do not want native Synaptics support
@@ -111,6 +101,16 @@ void synaptics_reset(struct psmouse *psmouse)
  *	Synaptics communications functions
  ****************************************************************************/
 
+/*
+ * Synaptics touchpads report the y coordinate from bottom to top, which is
+ * opposite from what userspace expects.
+ * This function is used to invert y before reporting.
+ */
+static int synaptics_invert_y(int y)
+{
+	return YMAX_NOMINAL + YMIN_NOMINAL - y;
+}
+
 /*
  * Send a command to the synpatics touchpad by special commands
  */
-- 
cgit v1.2.3-18-g5258


From f77621cc640a7c50b3d8c5254ecc5d91eaa99d0d Mon Sep 17 00:00:00 2001
From: "Poddar, Sourav" <sourav.poddar@ti.com>
Date: Thu, 10 May 2012 22:32:00 -0700
Subject: Input: omap-keypad - dynamically handle register offsets
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Hi Dmitry,

On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote:
> Hi Dmitry,
>
> I did some minor fixes to the patch which you suggested above and
> the keypad is functional now.
>
> Changes:
> - Move "pm_runtime_enable" before using "pm_runtime_get_sync".
>
> Sending the patch inlined..(also attached).
>
> From: G, Manjunath Kondaiah <manjugk@ti.com>
> Date: Mon, 10 Oct 2011 20:52:05 +0530
> Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
>
> Keypad controller register offsets are different for omap4
> and omap5. Handle these offsets through static mapping and
> assign these mappings during run time.
>
> Tested on omap4430 sdp with 3.4-rc3.
> Tested on omap5430evm with 3.1-custom kernel.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>  drivers/input/keyboard/Kconfig        |    4 +-
>  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++-------
>  2 files changed, 95 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index f354813..33bbdee 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -512,9 +512,9 @@ config KEYBOARD_OMAP
>          module will be called omap-keypad.
>
>  config KEYBOARD_OMAP4
> -       tristate "TI OMAP4 keypad support"
> +       tristate "TI OMAP4+ keypad support"
>        help
> -         Say Y here if you want to use the OMAP4 keypad.
> +         Say Y here if you want to use the OMAP4+ keypad.
>
>          To compile this driver as a module, choose M here: the
>          module will be called omap4-keypad.
> diff --git a/drivers/input/keyboard/omap4-keypad.c
> b/drivers/input/keyboard/omap4-keypad.c
> index e809ac0..d7102e8 100644
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -68,19 +68,52 @@
>
>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>
> +enum {
> +       KBD_REVISION_OMAP4 = 0,
> +       KBD_REVISION_OMAP5,
> +};
> +
>  struct omap4_keypad {
>        struct input_dev *input;
>
>        void __iomem *base;
> -       int irq;
> +       unsigned int irq;
>
>        unsigned int rows;
>        unsigned int cols;
> +       u32 reg_offset;
> +       u32 irqreg_offset;
>        unsigned int row_shift;
>        unsigned char key_state[8];
>        unsigned short keymap[];
>  };
>
> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->reg_offset + offset);
> +}
> +
> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->reg_offset + offset);
> +}
> +
> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->irqreg_offset + offset);
> +}
> +
> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
> +                            u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
> +}
> +
> +
>  /* Interrupt handler */
>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>  {
> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>        u32 *new_state = (u32 *) key_state;
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
> -       *(new_state + 1) = __raw_readl(keypad_data->base
> -                                               + OMAP4_KBD_FULLCODE63_32);
> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>
>        for (row = 0; row < keypad_data->rows; row++) {
>                changed = key_state[row] ^ keypad_data->key_state[row];
> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>                sizeof(keypad_data->key_state));
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        /* enable interrupts */
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +               OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>
>        return IRQ_HANDLED;
>  }
> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>
>        disable_irq(keypad_data->irq);
>
> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> -                       keypad_data->base + OMAP4_KBD_CTRL);
> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
> +                       OMAP4_VAL_FUNCTIONALCFG);
> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
> +                       OMAP4_VAL_DEBOUNCINGTIME);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                       OMAP4_VAL_IRQDISABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>
>        enable_irq(keypad_data->irq);
>
> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>        disable_irq(keypad_data->irq);
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        enable_irq(keypad_data->irq);
>
> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        struct resource *res;
>        resource_size_t size;
>        unsigned int row_shift, max_keys;
> +       int rev;
>        int irq;
>        int error;
>
> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        keypad_data->rows = pdata->rows;
>        keypad_data->cols = pdata->cols;
>
> +       /*
> +       * Enable clocks for the keypad module so that we can read
> +       * revision register.
> +       */
> +       pm_runtime_enable(&pdev->dev);
> +       error = pm_runtime_get_sync(&pdev->dev);
> +       if (error) {
> +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
> +               goto err_unmap;
> +       }
> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
> +       rev &= 0x03 << 30;
> +       rev >>= 30;
> +       switch (rev) {
> +       case KBD_REVISION_OMAP4:
> +               keypad_data->reg_offset = 0x00;
> +               keypad_data->irqreg_offset = 0x00;
> +               break;
> +       case KBD_REVISION_OMAP5:
> +               keypad_data->reg_offset = 0x10;
> +               keypad_data->irqreg_offset = 0x0c;
> +               break;
> +       default:
> +               dev_err(&pdev->dev,
> +                       "Keypad reports unsupported revision %d", rev);
> +               error = -EINVAL;
> +               goto err_pm_put_sync;
> +       }
> +
>        /* input device allocation */
>        keypad_data->input = input_dev = input_allocate_device();
>        if (!input_dev) {
>                error = -ENOMEM;
> -               goto err_unmap;
> +               goto err_pm_put_sync;
>        }
>
>        input_dev->name = pdev->name;
> @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>                        input_dev->keycode, input_dev->keybit);
>
>        error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
> -                            IRQF_TRIGGER_RISING,
> +                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
Sorry, " IRQF_DISABLED" got included by mistake.
Removing this stray change and sending it again.

>                             "omap4-keypad", keypad_data);
>        if (error) {
>                dev_err(&pdev->dev, "failed to register interrupt\n");
>                goto err_free_input;
>        }
>
> -       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_put_sync(&pdev->dev);
>
>        error = input_register_device(keypad_data->input);
>        if (error < 0) {
> @@ -296,6 +360,8 @@ err_pm_disable:
>        free_irq(keypad_data->irq, keypad_data);
>  err_free_input:
>        input_free_device(input_dev);
> +err_pm_put_sync:
> +       pm_runtime_put_sync(&pdev->dev);
>  err_unmap:
>        iounmap(keypad_data->base);
>  err_release_mem:
>
>
> ~Sourav
>
> On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>>> Hi Dmitry ,
>>>
>>>
>>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
>>> <dmitry.torokhov@gmail.com> wrote:
>>> > Ho Sourav,
>>> >
>>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
>>> >>
>>> >> -config KEYBOARD_OMAP4
>>> >> -     tristate "TI OMAP4 keypad support"
>>> >> +config KEYBOARD_OMAP4+
>>> >
>>> > I think this works purely by accident - '+' sign getting dropped by
>>> > parser...
>>> >
>>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
>>> >>
>>> >>       disable_irq(keypad_data->irq);
>>> >>
>>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>>> >> -                     keypad_data->base + OMAP4_KBD_CTRL);
>>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS);
>>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE);
>>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>>> >> +     keypad_data->revision = kbd_read_revision(keypad_data,
>>> >> +                     OMAP4_KBD_REVISION);
>>> >> +     switch (keypad_data->revision) {
>>> >> +     case 1:
>>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
>>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
>>> >> +             keypad_data->reg_offset = 0x10;
>>> >> +             break;
>>> >
>>> > This should be done in probe().
>>> >
>>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
>>> to read the keypad revision register.?
>>
>> Ah, indeed, but I think not pm_runtime_get_sync() but
>> pm_runtime_set_active().
>>
>> Not sure if this will fix the crash...
>>
>> --
>> Dmitry
>>
>>
>> Input: omap-keypad - dynamically handle register offsets
>>
>> From: G, Manjunath Kondaiah <manjugk@ti.com>
>>
>> Keypad controller register offsets are different for omap4
>> and omap5. Handle these offsets through static mapping and
>> assign these mappings during run time.
>>
>> Tested on omap4430 sdp with 3.4-rc3.
>> Tested on omap5430evm with 3.1-custom kernel.
>>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
>> ---
>>
>>  drivers/input/keyboard/Kconfig        |    4 +
>>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++-------
>>  2 files changed, 94 insertions(+), 27 deletions(-)
>>
>>
>> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
>> index 20a3753..84ee155 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP
>>          module will be called omap-keypad.
>>
>>  config KEYBOARD_OMAP4
>> -       tristate "TI OMAP4 keypad support"
>> +       tristate "TI OMAP4+ keypad support"
>>        help
>> -         Say Y here if you want to use the OMAP4 keypad.
>> +         Say Y here if you want to use the OMAP4+ keypad.
>>
>>          To compile this driver as a module, choose M here: the
>>          module will be called omap4-keypad.
>> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
>> index e809ac0..c9fd0df 100644
>> --- a/drivers/input/keyboard/omap4-keypad.c
>> +++ b/drivers/input/keyboard/omap4-keypad.c
>> @@ -68,19 +68,52 @@
>>
>>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>>
>> +enum {
>> +       KBD_REVISION_OMAP4 = 0,
>> +       KBD_REVISION_OMAP5,
>> +};
>> +
>>  struct omap4_keypad {
>>        struct input_dev *input;
>>
>>        void __iomem *base;
>> -       int irq;
>> +       unsigned int irq;
>>
>>        unsigned int rows;
>>        unsigned int cols;
>> +       u32 reg_offset;
>> +       u32 irqreg_offset;
>>        unsigned int row_shift;
>>        unsigned char key_state[8];
>>        unsigned short keymap[];
>>  };
>>
>> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->reg_offset + offset);
>> +}
>> +
>> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->reg_offset + offset);
>> +}
>> +
>> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
>> +                            u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +
>>  /* Interrupt handler */
>>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>  {
>> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>        u32 *new_state = (u32 *) key_state;
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
>> -       *(new_state + 1) = __raw_readl(keypad_data->base
>> -                                               + OMAP4_KBD_FULLCODE63_32);
>> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
>> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>>
>>        for (row = 0; row < keypad_data->rows; row++) {
>>                changed = key_state[row] ^ keypad_data->key_state[row];
>> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>                sizeof(keypad_data->key_state));
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        /* enable interrupts */
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +               OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>>
>>        return IRQ_HANDLED;
>>  }
>> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>>
>>        disable_irq(keypad_data->irq);
>>
>> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>> -                       keypad_data->base + OMAP4_KBD_CTRL);
>> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
>> +                       OMAP4_VAL_FUNCTIONALCFG);
>> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
>> +                       OMAP4_VAL_DEBOUNCINGTIME);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                       OMAP4_VAL_IRQDISABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
>> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>>        disable_irq(keypad_data->irq);
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        struct resource *res;
>>        resource_size_t size;
>>        unsigned int row_shift, max_keys;
>> +       int rev;
>>        int irq;
>>        int error;
>>
>> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        keypad_data->rows = pdata->rows;
>>        keypad_data->cols = pdata->cols;
>>
>> +       /*
>> +        * Mark device as active (and wake up its parent) so we can read
>> +        * revision register.
>> +        */
>> +       error = pm_runtime_set_active(&pdev->dev);
>> +       if (error) {
>> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
>> +               goto err_unmap;
>> +       }
>> +
>> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
>> +       rev &= 0x03 << 30;
>> +       rev >>= 30;
>> +       switch (rev) {
>> +       case KBD_REVISION_OMAP4:
>> +               keypad_data->reg_offset = 0x00;
>> +               keypad_data->irqreg_offset = 0x00;
>> +               break;
>> +       case KBD_REVISION_OMAP5:
>> +               keypad_data->reg_offset = 0x10;
>> +               keypad_data->irqreg_offset = 0x0c;
>> +               break;
>> +       default:
>> +               dev_err(&pdev->dev,
>> +                       "Keypad reports unsupported revision %d", rev);
>> +               error = -EINVAL;
>> +               goto err_pm_suspended;
>> +       }
>> +
>>        /* input device allocation */
>>        keypad_data->input = input_dev = input_allocate_device();
>>        if (!input_dev) {
>>                error = -ENOMEM;
>> -               goto err_unmap;
>> +               goto err_pm_suspended;
>>        }
>>
>>        input_dev->name = pdev->name;
>> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        }
>>
>>        pm_runtime_enable(&pdev->dev);
>> +       pm_runtime_put_sync(&pdev->dev);
>>
>>        error = input_register_device(keypad_data->input);
>>        if (error < 0) {
>> @@ -296,6 +361,8 @@ err_pm_disable:
>>        free_irq(keypad_data->irq, keypad_data);
>>  err_free_input:
>>        input_free_device(input_dev);
>> +err_pm_suspended:
>> +       pm_runtime_set_suspended(&pdev->dev);
>>  err_unmap:
>>        iounmap(keypad_data->base);
>>  err_release_mem:

From: G, Manjunath Kondaiah <manjugk@ti.com>
Date: Mon, 10 Oct 2011 20:52:05 +0530
Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets

Keypad controller register offsets are different for omap4
and omap5. Handle these offsets through static mapping and
assign these mappings during run time.

Tested on omap4430 sdp with 3.4-rc3.
Tested on omap5430evm with 3.1-custom kernel.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/Kconfig        |   4 +-
 drivers/input/keyboard/omap4-keypad.c | 118 ++++++++++++++++++++++++++--------
 2 files changed, 94 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7eaf93fe512..ea4bbaae9e0 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -522,9 +522,9 @@ config KEYBOARD_OMAP
 	  module will be called omap-keypad.
 
 config KEYBOARD_OMAP4
-	tristate "TI OMAP4 keypad support"
+	tristate "TI OMAP4+ keypad support"
 	help
-	  Say Y here if you want to use the OMAP4 keypad.
+	  Say Y here if you want to use the OMAP4+ keypad.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e809ac095a3..28da0e46968 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -68,19 +68,52 @@
 
 #define OMAP4_MASK_IRQSTATUSDISABLE	0xFFFF
 
+enum {
+	KBD_REVISION_OMAP4 = 0,
+	KBD_REVISION_OMAP5,
+};
+
 struct omap4_keypad {
 	struct input_dev *input;
 
 	void __iomem *base;
-	int irq;
+	unsigned int irq;
 
 	unsigned int rows;
 	unsigned int cols;
+	u32 reg_offset;
+	u32 irqreg_offset;
 	unsigned int row_shift;
 	unsigned char key_state[8];
 	unsigned short keymap[];
 };
 
+static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->reg_offset + offset);
+}
+
+static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->reg_offset + offset);
+}
+
+static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
+{
+	return __raw_readl(keypad_data->base +
+				keypad_data->irqreg_offset + offset);
+}
+
+static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
+			     u32 offset, u32 value)
+{
+	__raw_writel(value,
+		     keypad_data->base + keypad_data->irqreg_offset + offset);
+}
+
+
 /* Interrupt handler */
 static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 {
@@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 	u32 *new_state = (u32 *) key_state;
 
 	/* Disable interrupts */
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			 OMAP4_VAL_IRQDISABLE);
 
-	*new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
-	*(new_state + 1) = __raw_readl(keypad_data->base
-						+ OMAP4_KBD_FULLCODE63_32);
+	*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+	*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
 
 	for (row = 0; row < keypad_data->rows; row++) {
 		changed = key_state[row] ^ keypad_data->key_state[row];
@@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 		sizeof(keypad_data->key_state));
 
 	/* clear pending interrupts */
-	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
 	/* enable interrupts */
-	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
-			keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+		OMAP4_DEF_IRQENABLE_EVENTEN |
+				OMAP4_DEF_IRQENABLE_LONGKEY);
 
 	return IRQ_HANDLED;
 }
@@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	disable_irq(keypad_data->irq);
 
-	__raw_writel(OMAP4_VAL_FUNCTIONALCFG,
-			keypad_data->base + OMAP4_KBD_CTRL);
-	__raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
-			keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
-	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
-			keypad_data->base + OMAP4_KBD_IRQENABLE);
-	__raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
-			keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
+			OMAP4_VAL_FUNCTIONALCFG);
+	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
+			OMAP4_VAL_DEBOUNCINGTIME);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			OMAP4_VAL_IRQDISABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			OMAP4_DEF_IRQENABLE_EVENTEN |
+				OMAP4_DEF_IRQENABLE_LONGKEY);
+	kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
+			OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
 
 	enable_irq(keypad_data->irq);
 
@@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
 	disable_irq(keypad_data->irq);
 
 	/* Disable interrupts */
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+			 OMAP4_VAL_IRQDISABLE);
 
 	/* clear pending interrupts */
-	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
 	enable_irq(keypad_data->irq);
 
@@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	struct resource *res;
 	resource_size_t size;
 	unsigned int row_shift, max_keys;
+	int rev;
 	int irq;
 	int error;
 
@@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	keypad_data->rows = pdata->rows;
 	keypad_data->cols = pdata->cols;
 
+	/*
+	* Enable clocks for the keypad module so that we can read
+	* revision register.
+	*/
+	pm_runtime_enable(&pdev->dev);
+	error = pm_runtime_get_sync(&pdev->dev);
+	if (error) {
+		dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+		goto err_unmap;
+	}
+	rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+	rev &= 0x03 << 30;
+	rev >>= 30;
+	switch (rev) {
+	case KBD_REVISION_OMAP4:
+		keypad_data->reg_offset = 0x00;
+		keypad_data->irqreg_offset = 0x00;
+		break;
+	case KBD_REVISION_OMAP5:
+		keypad_data->reg_offset = 0x10;
+		keypad_data->irqreg_offset = 0x0c;
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"Keypad reports unsupported revision %d", rev);
+		error = -EINVAL;
+		goto err_pm_put_sync;
+	}
+
 	/* input device allocation */
 	keypad_data->input = input_dev = input_allocate_device();
 	if (!input_dev) {
 		error = -ENOMEM;
-		goto err_unmap;
+		goto err_pm_put_sync;
 	}
 
 	input_dev->name = pdev->name;
@@ -280,7 +344,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		goto err_free_input;
 	}
 
-	pm_runtime_enable(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
 
 	error = input_register_device(keypad_data->input);
 	if (error < 0) {
@@ -296,6 +360,8 @@ err_pm_disable:
 	free_irq(keypad_data->irq, keypad_data);
 err_free_input:
 	input_free_device(input_dev);
+err_pm_put_sync:
+	pm_runtime_put_sync(&pdev->dev);
 err_unmap:
 	iounmap(keypad_data->base);
 err_release_mem:
-- 
cgit v1.2.3-18-g5258


From d0a3457d38adbad37e43ffe6b763360b2bfe71d9 Mon Sep 17 00:00:00 2001
From: Jean-François Dagenais <jeff.dagenais@gmail.com>
Date: Thu, 10 May 2012 22:32:00 -0700
Subject: Input: adp5588 - add support for gpio names
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Jean-François Dagenais <jeff.dagenais@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/adp5588-keys.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 39ebffac207..b083bf10f13 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -197,6 +197,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
 	kpad->gc.base = gpio_data->gpio_start;
 	kpad->gc.label = kpad->client->name;
 	kpad->gc.owner = THIS_MODULE;
+	kpad->gc.names = gpio_data->names;
 
 	mutex_init(&kpad->gpio_lock);
 
-- 
cgit v1.2.3-18-g5258


From 1932811f426fee71b7ece67e70aeba7e1b0ebb6d Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 10 May 2012 22:37:08 -0700
Subject: Input: matrix-keymap - uninline and prepare for device tree support

Change matrix-keymap helper to be out-of-line, like sparse keymap,
allow the helper perform basic keymap validation and return errors,
and prepare for device tree support.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/Kconfig                       |  17 +++-
 drivers/input/Makefile                      |   2 +-
 drivers/input/keyboard/Kconfig              |  18 +++-
 drivers/input/keyboard/ep93xx_keypad.c      |  18 ++--
 drivers/input/keyboard/imx_keypad.c         |  17 ++--
 drivers/input/keyboard/lm8333.c             |  15 ++-
 drivers/input/keyboard/matrix_keypad.c      |  17 ++--
 drivers/input/keyboard/nomadik-ske-keypad.c |  20 ++--
 drivers/input/keyboard/omap-keypad.c        |  20 ++--
 drivers/input/keyboard/omap4-keypad.c       |  15 ++-
 drivers/input/keyboard/pmic8xxx-keypad.c    |  20 ++--
 drivers/input/keyboard/samsung-keypad.c     |  20 ++--
 drivers/input/keyboard/spear-keyboard.c     |  21 ++--
 drivers/input/keyboard/stmpe-keypad.c       |  16 ++--
 drivers/input/keyboard/tc3589x-keypad.c     |  19 ++--
 drivers/input/keyboard/tca8418_keypad.c     |  15 ++-
 drivers/input/keyboard/tegra-kbc.c          |  34 ++++---
 drivers/input/keyboard/tnetv107x-keypad.c   |  21 ++--
 drivers/input/keyboard/twl4030_keypad.c     |  25 +++--
 drivers/input/keyboard/w90p910_keypad.c     |  27 +++---
 drivers/input/matrix-keymap.c               | 142 ++++++++++++++++++++++++++++
 drivers/input/of_keymap.c                   |  87 -----------------
 22 files changed, 344 insertions(+), 262 deletions(-)
 create mode 100644 drivers/input/matrix-keymap.c
 delete mode 100644 drivers/input/of_keymap.c

(limited to 'drivers')

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 33259798081..55f7e57d4e4 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -25,10 +25,6 @@ config INPUT
 
 if INPUT
 
-config INPUT_OF_MATRIX_KEYMAP
-	depends on USE_OF
-	bool
-
 config INPUT_FF_MEMLESS
 	tristate "Support for memoryless force-feedback devices"
 	help
@@ -68,6 +64,19 @@ config INPUT_SPARSEKMAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called sparse-keymap.
 
+config INPUT_MATRIXKMAP
+	tristate "Matrix keymap support library"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that uses matrix keymap. This option is only
+	  useful for out-of-tree drivers since in-tree drivers
+	  select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matrix-keymap.
+
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index b173a13a73c..5ca3f631497 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -10,6 +10,7 @@ input-core-y := input.o input-compat.o input-mt.o ff-core.o
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARSEKMAP)	+= sparse-keymap.o
+obj-$(CONFIG_INPUT_MATRIXKMAP)	+= matrix-keymap.o
 
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
@@ -24,4 +25,3 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
-obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ea4bbaae9e0..c0e11ecc646 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -166,6 +166,7 @@ config KEYBOARD_LKKBD
 config KEYBOARD_EP93XX
 	tristate "EP93xx Matrix Keypad support"
 	depends on ARCH_EP93XX
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 
@@ -224,6 +225,7 @@ config KEYBOARD_TCA6416
 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
 	depends on I2C
+	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
 	  for keys connected through TCA8418 keypad decoder.
@@ -240,6 +242,7 @@ config KEYBOARD_TCA8418
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
 	depends on GENERIC_GPIO
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for GPIO driven matrix keypad.
 
@@ -312,6 +315,7 @@ config KEYBOARD_LM8323
 config KEYBOARD_LM8333
 	tristate "LM8333 keypad chip"
 	depends on I2C
+	select INPUT_MATRIXKMAP
 	help
 	  If you say yes here you get support for the National Semiconductor
 	  LM8333 keypad controller.
@@ -376,6 +380,7 @@ config KEYBOARD_MPR121
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for IMX keypad port.
 
@@ -394,6 +399,7 @@ config KEYBOARD_NEWTON
 config KEYBOARD_NOMADIK
 	tristate "ST-Ericsson Nomadik SKE keyboard"
 	depends on PLAT_NOMADIK
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a keypad provided on the SKE controller
 	  used on the Ux500 and Nomadik platforms
@@ -404,7 +410,7 @@ config KEYBOARD_NOMADIK
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
 	depends on ARCH_TEGRA
-	select INPUT_OF_MATRIX_KEYMAP if USE_OF
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use a matrix keyboard connected directly
 	  to the internal keyboard controller on Tegra SoCs.
@@ -442,6 +448,7 @@ config KEYBOARD_PXA930_ROTARY
 config KEYBOARD_PMIC8XXX
 	tristate "Qualcomm PMIC8XXX keypad support"
 	depends on MFD_PM8XXX
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to enable the driver for the PMIC8XXX
 	  keypad provided as a reference design from Qualcomm. This is intended
@@ -453,6 +460,7 @@ config KEYBOARD_PMIC8XXX
 config KEYBOARD_SAMSUNG
 	tristate "Samsung keypad support"
 	depends on HAVE_CLK
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad on your Samsung mobile
 	  device.
@@ -495,6 +503,7 @@ config KEYBOARD_SH_KEYSC
 config KEYBOARD_STMPE
 	tristate "STMPE keypad support"
 	depends on MFD_STMPE
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on STMPE I/O
 	  expanders.
@@ -515,6 +524,7 @@ config KEYBOARD_DAVINCI
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on (ARCH_OMAP1 || ARCH_OMAP2)
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP keypad.
 
@@ -523,6 +533,7 @@ config KEYBOARD_OMAP
 
 config KEYBOARD_OMAP4
 	tristate "TI OMAP4+ keypad support"
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the OMAP4+ keypad.
 
@@ -532,6 +543,7 @@ config KEYBOARD_OMAP4
 config KEYBOARD_SPEAR
 	tristate "ST SPEAR keyboard support"
 	depends on PLAT_SPEAR
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the SPEAR keyboard.
 
@@ -541,6 +553,7 @@ config KEYBOARD_SPEAR
 config KEYBOARD_TC3589X
 	tristate "TC3589X Keypad support"
 	depends on MFD_TC3589X
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad controller on
 	  TC35892/3 I/O expander.
@@ -551,6 +564,7 @@ config KEYBOARD_TC3589X
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the TNETV107X keypad.
 
@@ -560,6 +574,7 @@ config KEYBOARD_TNETV107X
 config KEYBOARD_TWL4030
 	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 	depends on TWL4030_CORE
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if your board use the keypad controller on
 	  TWL4030 family chips.  It's safe to say enable this
@@ -583,6 +598,7 @@ config KEYBOARD_XTKBD
 config KEYBOARD_W90P910
 	tristate "W90P910 Matrix Keypad support"
 	depends on ARCH_W90X900
+	select INPUT_MATRIXKMAP
 	help
 	  Say Y here to enable the matrix keypad on evaluation board
 	  based on W90P910.
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index df194bdaab5..c46fc818546 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -303,19 +303,16 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	input_dev->open = ep93xx_keypad_open;
 	input_dev->close = ep93xx_keypad_close;
 	input_dev->dev.parent = &pdev->dev;
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
 
-	input_set_drvdata(input_dev, keypad);
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
+					 keypad->keycodes, input_dev);
+	if (err)
+		goto failed_free_dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
 	if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
-
-	matrix_keypad_build_keymap(keymap_data, 3,
-				   input_dev->keycode, input_dev->keybit);
-	platform_set_drvdata(pdev, keypad);
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_drvdata(input_dev, keypad);
 
 	err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
 			  0, pdev->name, keypad);
@@ -326,6 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
 	if (err)
 		goto failed_free_irq;
 
+	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
 	return 0;
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index fb87b3bcadb..6ee7421e232 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -481,7 +481,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	}
 
 	if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
-	   keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+	    keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
 		dev_err(&pdev->dev,
 			"invalid key data (too many rows or colums)\n");
 		error = -EINVAL;
@@ -496,14 +496,17 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	input_dev->dev.parent = &pdev->dev;
 	input_dev->open = imx_keypad_open;
 	input_dev->close = imx_keypad_close;
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
 
-	matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
-				keypad->keycodes, input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   MAX_MATRIX_KEY_ROWS,
+					   MAX_MATRIX_KEY_COLS,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto failed_clock_put;
+	}
 
+	__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
index 9a8c4a6cf5c..ca168a6679d 100644
--- a/drivers/input/keyboard/lm8333.c
+++ b/drivers/input/keyboard/lm8333.c
@@ -29,9 +29,9 @@
 
 #define LM8333_FIFO_TRANSFER_SIZE	16
 
-#define LM8333_ROW_SHIFT	4
 #define LM8333_NUM_ROWS		8
-
+#define LM8333_NUM_COLS		16
+#define LM8333_ROW_SHIFT	4
 
 struct lm8333 {
 	struct i2c_client *client;
@@ -159,14 +159,13 @@ static int __devinit lm8333_probe(struct i2c_client *client,
 	input->dev.parent = &client->dev;
 	input->id.bustype = BUS_I2C;
 
-	input->keycode = lm8333->keycodes;
-	input->keycodesize = sizeof(lm8333->keycodes[0]);
-	input->keycodemax = ARRAY_SIZE(lm8333->keycodes);
-	input->evbit[0] = BIT_MASK(EV_KEY);
 	input_set_capability(input, EV_MSC, MSC_SCAN);
 
-	matrix_keypad_build_keymap(pdata->matrix_data, LM8333_ROW_SHIFT,
-			input->keycode, input->keybit);
+	err = matrix_keypad_build_keymap(pdata->matrix_data, NULL,
+					 LM8333_NUM_ROWS, LM8333_NUM_COLS,
+					 lm8333->keycodes, input);
+	if (err)
+		goto free_mem;
 
 	if (pdata->debounce_time) {
 		err = lm8333_write8(lm8333, LM8333_DEBOUNCE,
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 98ae281bedb..18b72372028 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -437,19 +437,18 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
 	input_dev->name		= pdev->name;
 	input_dev->id.bustype	= BUS_HOST;
 	input_dev->dev.parent	= &pdev->dev;
-	input_dev->evbit[0]	= BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
 	input_dev->open		= matrix_keypad_start;
 	input_dev->close	= matrix_keypad_stop;
 
-	input_dev->keycode	= keypad->keycodes;
-	input_dev->keycodesize	= sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax	= pdata->num_row_gpios << row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, row_shift,
-				   input_dev->keycode, input_dev->keybit);
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 pdata->num_row_gpios,
+					 pdata->num_col_gpios,
+					 keypad->keycodes, input_dev);
+	if (err)
+		goto err_free_mem;
 
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 	input_set_drvdata(input_dev, keypad);
 
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 101e245944e..4ea4341a68c 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -39,7 +39,8 @@
 #define SKE_KPRISA	(0x1 << 2)
 
 #define SKE_KEYPAD_ROW_SHIFT	3
-#define SKE_KPD_KEYMAP_SIZE	(8 * 8)
+#define SKE_KPD_NUM_ROWS	8
+#define SKE_KPD_NUM_COLS	8
 
 /* keypad auto scan registers */
 #define SKE_ASR0	0x20
@@ -63,7 +64,7 @@ struct ske_keypad {
 	void __iomem *reg_base;
 	struct input_dev *input;
 	const struct ske_keypad_platform_data *board;
-	unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+	unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
 	struct clk *clk;
 	spinlock_t ske_keypad_lock;
 };
@@ -261,19 +262,18 @@ static int __init ske_keypad_probe(struct platform_device *pdev)
 	input->name = "ux500-ske-keypad";
 	input->dev.parent = &pdev->dev;
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_iounmap;
+	}
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-
-	__set_bit(EV_KEY, input->evbit);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
-			input->keycode, input->keybit);
-
 	clk_enable(keypad->clk);
 
 	/* go through board initialization helpers */
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 6b630d9d3df..a0222db4dc8 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -61,6 +61,7 @@ struct omap_kp {
 	unsigned int cols;
 	unsigned long delay;
 	unsigned int debounce;
+	unsigned short keymap[];
 };
 
 static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
@@ -316,13 +317,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	if (!cpu_is_omap24xx())
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
-	input_dev->keycode      = &omap_kp[1];
-	input_dev->keycodesize  = sizeof(unsigned short);
-	input_dev->keycodemax   = keycodemax;
-
-	if (pdata->rep)
-		__set_bit(EV_REP, input_dev->evbit);
-
 	if (pdata->delay)
 		omap_kp->delay = pdata->delay;
 
@@ -371,9 +365,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 		goto err2;
 
 	/* setup input device */
-	__set_bit(EV_KEY, input_dev->evbit);
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
 	input_dev->name = "omap-keypad";
 	input_dev->phys = "omap-keypad/input0";
 	input_dev->dev.parent = &pdev->dev;
@@ -383,6 +374,15 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0100;
 
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+
+	ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					 pdata->rows, pdata->cols,
+					 omap_kp->keymap, input_dev);
+	if (ret < 0)
+		goto err3;
+
 	ret = input_register_device(omap_kp->input);
 	if (ret < 0) {
 		printk(KERN_ERR "Unable to register omap-keypad input device\n");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 28da0e46968..aed5f6999ce 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -322,20 +322,19 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	input_dev->open = omap4_keypad_open;
 	input_dev->close = omap4_keypad_close;
 
-	input_dev->keycode	= keypad_data->keymap;
-	input_dev->keycodesize	= sizeof(keypad_data->keymap[0]);
-	input_dev->keycodemax	= max_keys;
+	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad_data->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_free_input;
+	}
 
-	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_REP, input_dev->evbit);
-
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
 	input_set_drvdata(input_dev, keypad_data);
 
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
-
 	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
 			     IRQF_TRIGGER_RISING,
 			     "omap4-keypad", keypad_data);
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 01a1c9f8a38..52c34657d30 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -626,21 +626,21 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
 	kp->input->id.product	= 0x0001;
 	kp->input->id.vendor	= 0x0001;
 
-	kp->input->evbit[0]	= BIT_MASK(EV_KEY);
-
-	if (pdata->rep)
-		__set_bit(EV_REP, kp->input->evbit);
-
-	kp->input->keycode	= kp->keycodes;
-	kp->input->keycodemax	= PM8XXX_MATRIX_MAX_SIZE;
-	kp->input->keycodesize	= sizeof(kp->keycodes);
 	kp->input->open		= pmic8xxx_kp_open;
 	kp->input->close	= pmic8xxx_kp_close;
 
-	matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
-					kp->input->keycode, kp->input->keybit);
+	rc = matrix_keypad_build_keymap(keymap_data, NULL,
+					PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
+					kp->keycodes, kp->input);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_get_irq;
+	}
 
+	if (pdata->rep)
+		__set_bit(EV_REP, kp->input->evbit);
 	input_set_capability(kp->input, EV_MSC, MSC_SCAN);
+
 	input_set_drvdata(kp->input, kp);
 
 	/* initialize keypad state */
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 2391ae884fe..a061ba603a2 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -454,23 +454,23 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
-	input_set_drvdata(input_dev, keypad);
 
 	input_dev->open = samsung_keypad_open;
 	input_dev->close = samsung_keypad_close;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_put_clk;
+	}
 
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	if (!pdata->no_autorepeat)
+		__set_bit(EV_REP, input_dev->evbit);
 
-	input_dev->keycode = keypad->keycodes;
-	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
-	input_dev->keycodemax = pdata->rows << row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, row_shift,
-			input_dev->keycode, input_dev->keybit);
+	input_set_drvdata(input_dev, keypad);
 
 	keypad->irq = platform_get_irq(pdev, 0);
 	if (keypad->irq < 0) {
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 3b6b528f02f..e83cab27eb5 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -49,7 +49,9 @@
 #define KEY_VALUE	0x00FFFFFF
 #define ROW_MASK	0xF0
 #define COLUMN_MASK	0x0F
-#define ROW_SHIFT	4
+#define NUM_ROWS	16
+#define NUM_COLS	16
+
 #define KEY_MATRIX_SHIFT	6
 
 struct spear_kbd {
@@ -60,7 +62,7 @@ struct spear_kbd {
 	unsigned int irq;
 	unsigned int mode;
 	unsigned short last_key;
-	unsigned short keycodes[256];
+	unsigned short keycodes[NUM_ROWS * NUM_COLS];
 };
 
 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -212,18 +214,17 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 	input_dev->open = spear_kbd_open;
 	input_dev->close = spear_kbd_close;
 
-	__set_bit(EV_KEY, input_dev->evbit);
+	error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
+					   kbd->keycodes, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_put_clk;
+	}
+
 	if (pdata->rep)
 		__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	input_dev->keycode = kbd->keycodes;
-	input_dev->keycodesize = sizeof(kbd->keycodes[0]);
-	input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
-
-	matrix_keypad_build_keymap(keymap, ROW_SHIFT,
-			input_dev->keycode, input_dev->keybit);
-
 	input_set_drvdata(input_dev, kbd);
 
 	error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index 9397cf9c625..470a8778dec 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -289,19 +289,17 @@ static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &pdev->dev;
 
-	input_set_capability(input, EV_MSC, MSC_SCAN);
+	ret = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					 STMPE_KEYPAD_MAX_ROWS,
+					 STMPE_KEYPAD_MAX_COLS,
+					 keypad->keymap, input);
+	if (ret)
+		goto out_freeinput;
 
-	__set_bit(EV_KEY, input->evbit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
-	matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
-				   input->keycode, input->keybit);
-
 	for (i = 0; i < plat->keymap_data->keymap_size; i++) {
 		unsigned int key = plat->keymap_data->keymap[i];
 
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index f4da2a7a697..7d498e69850 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -78,7 +78,7 @@
  * @input:      pointer to input device object
  * @board:      keypad platform device
  * @krow:	number of rows
- * @kcol:	number of coloumns
+ * @kcol:	number of columns
  * @keymap:     matrix scan code table for keycodes
  * @keypad_stopped: holds keypad status
  */
@@ -333,23 +333,22 @@ static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
 	input->name = pdev->name;
 	input->dev.parent = &pdev->dev;
 
-	input->keycode = keypad->keymap;
-	input->keycodesize = sizeof(keypad->keymap[0]);
-	input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
 	input->open = tc3589x_keypad_open;
 	input->close = tc3589x_keypad_close;
 
-	input_set_drvdata(input, keypad);
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_free_mem;
+	}
 
 	input_set_capability(input, EV_MSC, MSC_SCAN);
-
-	__set_bit(EV_KEY, input->evbit);
 	if (!plat->no_autorepeat)
 		__set_bit(EV_REP, input->evbit);
 
-	matrix_keypad_build_keymap(plat->keymap_data, 0x3,
-			input->keycode, input->keybit);
+	input_set_drvdata(input, keypad);
 
 	error = request_threaded_irq(irq, NULL,
 			tc3589x_keypad_irq, plat->irqtype,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 958ec107bfb..5f87b28b319 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -342,21 +342,20 @@ static int __devinit tca8418_keypad_probe(struct i2c_client *client,
 	input->id.product = 0x001;
 	input->id.version = 0x0001;
 
-	input->keycode     = keypad_data->keymap;
-	input->keycodesize = sizeof(keypad_data->keymap[0]);
-	input->keycodemax  = max_keys;
+	error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+					   pdata->rows, pdata->cols,
+					   keypad_data->keymap, input);
+	if (error) {
+		dev_dbg(&client->dev, "Failed to build keymap\n");
+		goto fail2;
+	}
 
-	__set_bit(EV_KEY, input->evbit);
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
-
 	input_set_capability(input, EV_MSC, MSC_SCAN);
 
 	input_set_drvdata(input, keypad_data);
 
-	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
-			input->keycode, input->keybit);
-
 	if (pdata->irq_is_gpio)
 		client->irq = gpio_to_irq(client->irq);
 
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index fe4ac95ca6c..6722d376e89 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -686,6 +686,7 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	int num_rows = 0;
 	unsigned int debounce_cnt;
 	unsigned int scan_time_rows;
+	unsigned int keymap_rows;
 
 	if (!pdata)
 		pdata = tegra_kbc_dt_parse_pdata(pdev);
@@ -757,29 +758,34 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt;
 	kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
 
+	kbc->wakeup_key = pdata->wakeup_key;
+	kbc->use_fn_map = pdata->use_fn_map;
+	kbc->use_ghost_filter = pdata->use_ghost_filter;
+
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
 	input_dev->open = tegra_kbc_open;
 	input_dev->close = tegra_kbc_close;
 
-	input_set_drvdata(input_dev, kbc);
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
-	input_dev->keycode = kbc->keycode;
-	input_dev->keycodesize = sizeof(kbc->keycode[0]);
-	input_dev->keycodemax = KBC_MAX_KEY;
+	keymap_rows = KBC_MAX_KEY;
 	if (pdata->use_fn_map)
-		input_dev->keycodemax *= 2;
+		keymap_rows *= 2;
 
-	kbc->use_fn_map = pdata->use_fn_map;
-	kbc->use_ghost_filter = pdata->use_ghost_filter;
 	keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
-	matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
-				   input_dev->keycode, input_dev->keybit);
-	kbc->wakeup_key = pdata->wakeup_key;
+
+	err = matrix_keypad_build_keymap(keymap_data, NULL,
+					 keymap_rows, KBC_MAX_COL,
+					 kbc->keycode, input_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto err_put_clk;
+	}
+
+	__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(input_dev, kbc);
 
 	err = request_irq(kbc->irq, tegra_kbc_isr,
 			  IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index fb39c94b6fd..a4a445fb702 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -247,15 +247,11 @@ static int __devinit keypad_probe(struct platform_device *pdev)
 		error = -ENOMEM;
 		goto error_input;
 	}
-	input_set_drvdata(kp->input_dev, kp);
 
 	kp->input_dev->name	  = pdev->name;
 	kp->input_dev->dev.parent = &pdev->dev;
 	kp->input_dev->open	  = keypad_start;
 	kp->input_dev->close	  = keypad_stop;
-	kp->input_dev->evbit[0]	  = BIT_MASK(EV_KEY);
-	if (!pdata->no_autorepeat)
-		kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
 
 	clk_enable(kp->clk);
 	rev = keypad_read(kp, rev);
@@ -264,15 +260,20 @@ static int __devinit keypad_probe(struct platform_device *pdev)
 	kp->input_dev->id.version = ((rev >> 16) & 0xfff);
 	clk_disable(kp->clk);
 
-	kp->input_dev->keycode     = kp->keycodes;
-	kp->input_dev->keycodesize = sizeof(kp->keycodes[0]);
-	kp->input_dev->keycodemax  = kp->rows << kp->row_shift;
-
-	matrix_keypad_build_keymap(keymap_data, kp->row_shift, kp->keycodes,
-				   kp->input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   kp->rows, kp->cols,
+					   kp->keycodes, kp->input_dev);
+	if (error) {
+		dev_err(dev, "Failed to build keymap\n");
+		goto error_reg;
+	}
 
+	if (!pdata->no_autorepeat)
+		kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
 	input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN);
 
+	input_set_drvdata(kp->input_dev, kp);
+
 	error = input_register_device(kp->input_dev);
 	if (error < 0) {
 		dev_err(dev, "Could not register input device\n");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 67bec14e8b9..a2c6f79aa10 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -361,14 +361,6 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 	kp->irq = platform_get_irq(pdev, 0);
 
 	/* setup input device */
-	__set_bit(EV_KEY, input->evbit);
-
-	/* Enable auto repeat feature of Linux input subsystem */
-	if (pdata->rep)
-		__set_bit(EV_REP, input->evbit);
-
-	input_set_capability(input, EV_MSC, MSC_SCAN);
-
 	input->name		= "TWL4030 Keypad";
 	input->phys		= "twl4030_keypad/input0";
 	input->dev.parent	= &pdev->dev;
@@ -378,12 +370,19 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 	input->id.product	= 0x0001;
 	input->id.version	= 0x0003;
 
-	input->keycode		= kp->keymap;
-	input->keycodesize	= sizeof(kp->keymap[0]);
-	input->keycodemax	= ARRAY_SIZE(kp->keymap);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   TWL4030_MAX_ROWS,
+					   1 << TWL4030_ROW_SHIFT,
+					   kp->keymap, input);
+	if (error) {
+		dev_err(kp->dbg_dev, "Failed to build keymap\n");
+		goto err1;
+	}
 
-	matrix_keypad_build_keymap(keymap_data, TWL4030_ROW_SHIFT,
-				   input->keycode, input->keybit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
 
 	error = input_register_device(input);
 	if (error) {
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 99bbb7e775a..085ede4d972 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -42,7 +42,8 @@
 #define KGET_RAW(n)		(((n) & KEY0R) >> 3)
 #define KGET_COLUMN(n)		((n) & KEY0C)
 
-#define W90P910_MAX_KEY_NUM	(8 * 8)
+#define W90P910_NUM_ROWS	8
+#define W90P910_NUM_COLS	8
 #define W90P910_ROW_SHIFT	3
 
 struct w90p910_keypad {
@@ -51,7 +52,7 @@ struct w90p910_keypad {
 	struct input_dev *input_dev;
 	void __iomem *mmio_base;
 	int irq;
-	unsigned short keymap[W90P910_MAX_KEY_NUM];
+	unsigned short keymap[W90P910_NUM_ROWS * W90P910_NUM_COLS];
 };
 
 static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
@@ -190,17 +191,13 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
 	input_dev->close = w90p910_keypad_close;
 	input_dev->dev.parent = &pdev->dev;
 
-	input_dev->keycode = keypad->keymap;
-	input_dev->keycodesize = sizeof(keypad->keymap[0]);
-	input_dev->keycodemax = ARRAY_SIZE(keypad->keymap);
-
-	input_set_drvdata(input_dev, keypad);
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
-	matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT,
-				   input_dev->keycode, input_dev->keybit);
+	error = matrix_keypad_build_keymap(keymap_data, NULL,
+					   W90P910_NUM_ROWS, W90P910_NUM_COLS,
+					   keypad->keymap, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		goto failed_put_clk;
+	}
 
 	error = request_irq(keypad->irq, w90p910_keypad_irq_handler,
 			    0, pdev->name, keypad);
@@ -209,6 +206,10 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
 		goto failed_put_clk;
 	}
 
+	__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
new file mode 100644
index 00000000000..de7992d55da
--- /dev/null
+++ b/drivers/input/matrix-keymap.c
@@ -0,0 +1,142 @@
+/*
+ * Helpers for matrix keyboard bindings
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * Author:
+ *	Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/input/matrix_keypad.h>
+
+
+/**
+ * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
+ * @keymap_data: keymap supplied by the platform code
+ * @keymap_name: name of device tree property containing keymap (if device
+ *	tree support is enabled).
+ * @rows: number of rows in target keymap array
+ * @cols: number of cols in target keymap array
+ * @keymap: expanded version of keymap that is suitable for use by
+ * matrix keyboard driver
+ * @input_dev: input devices for which we are setting up the keymap
+ *
+ * This function converts platform keymap (encoded with KEY() macro) into
+ * an array of keycodes that is suitable for using in a standard matrix
+ * keyboard driver that uses row and col as indices.
+ */
+int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
+			       const char *keymap_name,
+			       unsigned int rows, unsigned int cols,
+			       unsigned short *keymap,
+			       struct input_dev *input_dev)
+{
+	unsigned int row_shift = get_count_order(cols);
+	int i;
+
+	input_dev->keycode = keymap;
+	input_dev->keycodesize = sizeof(*keymap);
+	input_dev->keycodemax = rows << row_shift;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		unsigned int key = keymap_data->keymap[i];
+		unsigned int row = KEY_ROW(key);
+		unsigned int col = KEY_COL(key);
+		unsigned short code = KEY_VAL(key);
+
+		if (row >= rows || col >= cols) {
+			dev_err(input_dev->dev.parent,
+				"%s: invalid keymap entry %d (row: %d, col: %d, rows: %d, cols: %d)\n",
+				__func__, i, row, col, rows, cols);
+			return -EINVAL;
+		}
+
+		keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
+}
+EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+#ifdef CONFIG_OF
+struct matrix_keymap_data *
+matrix_keyboard_of_fill_keymap(struct device_node *np,
+			       const char *propname)
+{
+	struct matrix_keymap_data *kd;
+	u32 *keymap;
+	int proplen, i;
+	const __be32 *prop;
+
+	if (!np)
+		return NULL;
+
+	if (!propname)
+		propname = "linux,keymap";
+
+	prop = of_get_property(np, propname, &proplen);
+	if (!prop)
+		return NULL;
+
+	if (proplen % sizeof(u32)) {
+		pr_warn("Malformed keymap property %s in %s\n",
+			propname, np->full_name);
+		return NULL;
+	}
+
+	kd = kzalloc(sizeof(*kd), GFP_KERNEL);
+	if (!kd)
+		return NULL;
+
+	kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL);
+	if (!kd->keymap) {
+		kfree(kd);
+		return NULL;
+	}
+
+	kd->keymap_size = proplen / sizeof(u32);
+
+	for (i = 0; i < kd->keymap_size; i++) {
+		u32 tmp = be32_to_cpup(prop + i);
+		int key_code, row, col;
+
+		row = (tmp >> 24) & 0xff;
+		col = (tmp >> 16) & 0xff;
+		key_code = tmp & 0xffff;
+		keymap[i] = KEY(row, col, key_code);
+	}
+
+	return kd;
+}
+EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap);
+
+void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
+{
+	if (kd) {
+		kfree(kd->keymap);
+		kfree(kd);
+	}
+}
+EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap);
+#endif
diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c
deleted file mode 100644
index 061493d5768..00000000000
--- a/drivers/input/of_keymap.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Helpers for open firmware matrix keyboard bindings
- *
- * Copyright (C) 2012 Google, Inc
- *
- * Author:
- *	Olof Johansson <olof@lixom.net>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/input.h>
-#include <linux/of.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/slab.h>
-
-struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np,
-			       const char *propname)
-{
-	struct matrix_keymap_data *kd;
-	u32 *keymap;
-	int proplen, i;
-	const __be32 *prop;
-
-	if (!np)
-		return NULL;
-
-	if (!propname)
-		propname = "linux,keymap";
-
-	prop = of_get_property(np, propname, &proplen);
-	if (!prop)
-		return NULL;
-
-	if (proplen % sizeof(u32)) {
-		pr_warn("Malformed keymap property %s in %s\n",
-			propname, np->full_name);
-		return NULL;
-	}
-
-	kd = kzalloc(sizeof(*kd), GFP_KERNEL);
-	if (!kd)
-		return NULL;
-
-	kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL);
-	if (!kd->keymap) {
-		kfree(kd);
-		return NULL;
-	}
-
-	kd->keymap_size = proplen / sizeof(u32);
-
-	for (i = 0; i < kd->keymap_size; i++) {
-		u32 tmp = be32_to_cpup(prop + i);
-		int key_code, row, col;
-
-		row = (tmp >> 24) & 0xff;
-		col = (tmp >> 16) & 0xff;
-		key_code = tmp & 0xffff;
-		keymap[i] = KEY(row, col, key_code);
-	}
-
-	return kd;
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap);
-
-void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
-{
-	if (kd) {
-		kfree(kd->keymap);
-		kfree(kd);
-	}
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap);
-- 
cgit v1.2.3-18-g5258


From b45c8f35a7fec17bdd159a7815203b6137c00ab9 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 10 May 2012 22:37:15 -0700
Subject: Input: matrix-keymap - wire up device tree support

When platform keymap is not supplied to matrix_keypad_build_keymap()
and device tree support is enabled, try locating specified property
and load keymap from it. If property name is not defined, try using
"linux,keymap".

Based on earlier patch by Viresh Kumar <viresh.kumar@st.com>

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/tegra-kbc.c |  56 +++++++-----
 drivers/input/matrix-keymap.c      | 175 +++++++++++++++++++++----------------
 2 files changed, 130 insertions(+), 101 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 6722d376e89..4ffe64d5310 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -619,8 +619,8 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
 }
 
 #ifdef CONFIG_OF
-static struct tegra_kbc_platform_data * __devinit
-tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
+static struct tegra_kbc_platform_data * __devinit tegra_kbc_dt_parse_pdata(
+	struct platform_device *pdev)
 {
 	struct tegra_kbc_platform_data *pdata;
 	struct device_node *np = pdev->dev.of_node;
@@ -660,10 +660,6 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
 		pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL;
 	}
 
-	pdata->keymap_data = matrix_keyboard_of_fill_keymap(np, "linux,keymap");
-
-	/* FIXME: Add handling of linux,fn-keymap here */
-
 	return pdata;
 }
 #else
@@ -674,10 +670,36 @@ static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
 }
 #endif
 
+static int __devinit tegra_kbd_setup_keymap(struct tegra_kbc *kbc)
+{
+	const struct tegra_kbc_platform_data *pdata = kbc->pdata;
+	const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
+	unsigned int keymap_rows = KBC_MAX_KEY;
+	int retval;
+
+	if (keymap_data && pdata->use_fn_map)
+		keymap_rows *= 2;
+
+	retval = matrix_keypad_build_keymap(keymap_data, NULL,
+					    keymap_rows, KBC_MAX_COL,
+					    kbc->keycode, kbc->idev);
+	if (retval == -ENOSYS || retval == -ENOENT) {
+		/*
+		 * If there is no OF support in kernel or keymap
+		 * property is missing, use default keymap.
+		 */
+		retval = matrix_keypad_build_keymap(
+					&tegra_kbc_default_keymap_data, NULL,
+					keymap_rows, KBC_MAX_COL,
+					kbc->keycode, kbc->idev);
+	}
+
+	return retval;
+}
+
 static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 {
 	const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
-	const struct matrix_keymap_data *keymap_data;
 	struct tegra_kbc *kbc;
 	struct input_dev *input_dev;
 	struct resource *res;
@@ -686,7 +708,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	int num_rows = 0;
 	unsigned int debounce_cnt;
 	unsigned int scan_time_rows;
-	unsigned int keymap_rows;
 
 	if (!pdata)
 		pdata = tegra_kbc_dt_parse_pdata(pdev);
@@ -768,17 +789,9 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	input_dev->open = tegra_kbc_open;
 	input_dev->close = tegra_kbc_close;
 
-	keymap_rows = KBC_MAX_KEY;
-	if (pdata->use_fn_map)
-		keymap_rows *= 2;
-
-	keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
-
-	err = matrix_keypad_build_keymap(keymap_data, NULL,
-					 keymap_rows, KBC_MAX_COL,
-					 kbc->keycode, input_dev);
+	err = tegra_kbd_setup_keymap(kbc);
 	if (err) {
-		dev_err(&pdev->dev, "failed to build keymap\n");
+		dev_err(&pdev->dev, "failed to setup keymap\n");
 		goto err_put_clk;
 	}
 
@@ -805,9 +818,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, kbc);
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 
-	if (!pdev->dev.platform_data)
-		matrix_keyboard_of_free_keymap(pdata->keymap_data);
-
 	return 0;
 
 err_free_irq:
@@ -822,10 +832,8 @@ err_free_mem:
 	input_free_device(input_dev);
 	kfree(kbc);
 err_free_pdata:
-	if (!pdev->dev.platform_data) {
-		matrix_keyboard_of_free_keymap(pdata->keymap_data);
+	if (!pdev->dev.platform_data)
 		kfree(pdata);
-	}
 
 	return err;
 }
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index de7992d55da..db92c1ebfc5 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -17,15 +17,91 @@
  *
  */
 
+#include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/slab.h>
 #include <linux/input/matrix_keypad.h>
 
+static bool matrix_keypad_map_key(struct input_dev *input_dev,
+				  unsigned int rows, unsigned int cols,
+				  unsigned int row_shift, unsigned int key)
+{
+	unsigned char *keymap = input_dev->keycode;
+	unsigned int row = KEY_ROW(key);
+	unsigned int col = KEY_COL(key);
+	unsigned short code = KEY_VAL(key);
+
+	if (row >= rows || col >= cols) {
+		dev_err(input_dev->dev.parent,
+			"%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n",
+			__func__, key, row, col, rows, cols);
+		return false;
+	}
+
+	keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+	__set_bit(code, input_dev->keybit);
+
+	return true;
+}
+
+#ifdef CONFIG_OF
+static int matrix_keypad_parse_of_keymap(const char *propname,
+					 unsigned int rows, unsigned int cols,
+					 struct input_dev *input_dev)
+{
+	struct device *dev = input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	unsigned int row_shift = get_count_order(cols);
+	unsigned int max_keys = rows << row_shift;
+	unsigned int proplen, i, size;
+	const __be32 *prop;
+
+	if (!np)
+		return -ENOENT;
+
+	if (!propname)
+		propname = "linux,keymap";
+
+	prop = of_get_property(np, propname, &proplen);
+	if (!prop) {
+		dev_err(dev, "OF: %s property not defined in %s\n",
+			propname, np->full_name);
+		return -ENOENT;
+	}
+
+	if (proplen % sizeof(u32)) {
+		dev_err(dev, "OF: Malformed keycode property %s in %s\n",
+			propname, np->full_name);
+		return -EINVAL;
+	}
+
+	size = proplen / sizeof(u32);
+	if (size > max_keys) {
+		dev_err(dev, "OF: %s size overflow\n", propname);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < size; i++) {
+		unsigned int key = be32_to_cpup(prop + i);
+
+		if (!matrix_keypad_map_key(input_dev, rows, cols,
+					   row_shift, key))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static int matrix_keypad_parse_of_keymap(const char *propname,
+					 unsigned int rows, unsigned int cols,
+					 struct input_dev *input_dev)
+{
+	return -ENOSYS;
+}
+#endif
 
 /**
  * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
@@ -41,6 +117,13 @@
  * This function converts platform keymap (encoded with KEY() macro) into
  * an array of keycodes that is suitable for using in a standard matrix
  * keyboard driver that uses row and col as indices.
+ *
+ * If @keymap_data is not supplied and device tree support is enabled
+ * it will attempt load the keymap from property specified by @keymap_name
+ * argument (or "linux,keymap" if @keymap_name is %NULL).
+ *
+ * Callers are expected to set up input_dev->dev.parent before calling this
+ * function.
  */
 int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 			       const char *keymap_name,
@@ -50,6 +133,7 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 {
 	unsigned int row_shift = get_count_order(cols);
 	int i;
+	int error;
 
 	input_dev->keycode = keymap;
 	input_dev->keycodesize = sizeof(*keymap);
@@ -57,86 +141,23 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 
 	__set_bit(EV_KEY, input_dev->evbit);
 
-	for (i = 0; i < keymap_data->keymap_size; i++) {
-		unsigned int key = keymap_data->keymap[i];
-		unsigned int row = KEY_ROW(key);
-		unsigned int col = KEY_COL(key);
-		unsigned short code = KEY_VAL(key);
+	if (keymap_data) {
+		for (i = 0; i < keymap_data->keymap_size; i++) {
+			unsigned int key = keymap_data->keymap[i];
 
-		if (row >= rows || col >= cols) {
-			dev_err(input_dev->dev.parent,
-				"%s: invalid keymap entry %d (row: %d, col: %d, rows: %d, cols: %d)\n",
-				__func__, i, row, col, rows, cols);
-			return -EINVAL;
+			if (!matrix_keypad_map_key(input_dev, rows, cols,
+						   row_shift, key))
+				return -EINVAL;
 		}
-
-		keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
-		__set_bit(code, input_dev->keybit);
+	} else {
+		error = matrix_keypad_parse_of_keymap(keymap_name, rows, cols,
+						      input_dev);
+		if (error)
+			return error;
 	}
+
 	__clear_bit(KEY_RESERVED, input_dev->keybit);
 
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
-
-#ifdef CONFIG_OF
-struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np,
-			       const char *propname)
-{
-	struct matrix_keymap_data *kd;
-	u32 *keymap;
-	int proplen, i;
-	const __be32 *prop;
-
-	if (!np)
-		return NULL;
-
-	if (!propname)
-		propname = "linux,keymap";
-
-	prop = of_get_property(np, propname, &proplen);
-	if (!prop)
-		return NULL;
-
-	if (proplen % sizeof(u32)) {
-		pr_warn("Malformed keymap property %s in %s\n",
-			propname, np->full_name);
-		return NULL;
-	}
-
-	kd = kzalloc(sizeof(*kd), GFP_KERNEL);
-	if (!kd)
-		return NULL;
-
-	kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL);
-	if (!kd->keymap) {
-		kfree(kd);
-		return NULL;
-	}
-
-	kd->keymap_size = proplen / sizeof(u32);
-
-	for (i = 0; i < kd->keymap_size; i++) {
-		u32 tmp = be32_to_cpup(prop + i);
-		int key_code, row, col;
-
-		row = (tmp >> 24) & 0xff;
-		col = (tmp >> 16) & 0xff;
-		key_code = tmp & 0xffff;
-		keymap[i] = KEY(row, col, key_code);
-	}
-
-	return kd;
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap);
-
-void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
-{
-	if (kd) {
-		kfree(kd->keymap);
-		kfree(kd);
-	}
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap);
-#endif
-- 
cgit v1.2.3-18-g5258


From 829c4f96900577afb1d91c0195b2e2a219e7d80f Mon Sep 17 00:00:00 2001
From: Viresh Kumar <viresh.kumar@st.com>
Date: Thu, 10 May 2012 22:37:16 -0700
Subject: Input: spear-keyboard - add device tree bindings

This adds simple DT bindings for spear-keyboard controller.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/spear-keyboard.c | 71 ++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index e83cab27eb5..6f287f7e153 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -19,6 +19,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_wakeup.h>
 #include <linux/slab.h>
@@ -63,6 +64,7 @@ struct spear_kbd {
 	unsigned int mode;
 	unsigned short last_key;
 	unsigned short keycodes[NUM_ROWS * NUM_COLS];
+	bool rep;
 };
 
 static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -138,27 +140,49 @@ static void spear_kbd_close(struct input_dev *dev)
 	kbd->last_key = KEY_RESERVED;
 }
 
-static int __devinit spear_kbd_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
+                                        struct spear_kbd *kbd)
 {
-	const struct kbd_platform_data *pdata = pdev->dev.platform_data;
-	const struct matrix_keymap_data *keymap;
-	struct spear_kbd *kbd;
-	struct input_dev *input_dev;
-	struct resource *res;
-	int irq;
+	struct device_node *np = pdev->dev.of_node;
 	int error;
+	u32 val;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "Invalid platform data\n");
+	if (!np) {
+		dev_err(&pdev->dev, "Missing DT data\n");
 		return -EINVAL;
 	}
 
-	keymap = pdata->keymap;
-	if (!keymap) {
-		dev_err(&pdev->dev, "no keymap defined\n");
-		return -EINVAL;
+	if (of_property_read_bool(np, "autorepeat"))
+		kbd->rep = true;
+
+	error = of_property_read_u32(np, "st,mode", &val);
+	if (error) {
+		dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
+		return error;
 	}
 
+	kbd->mode = val;
+	return 0;
+}
+#else
+static inline int spear_kbd_parse_dt(struct platform_device *pdev,
+				     struct spear_kbd *kbd)
+{
+	return -ENOSYS;
+}
+#endif
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+	struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no keyboard resource defined\n");
@@ -181,7 +205,15 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 
 	kbd->input = input_dev;
 	kbd->irq = irq;
-	kbd->mode = pdata->mode;
+
+	if (!pdata) {
+		error = spear_kbd_parse_dt(pdev, kbd);
+		if (error)
+			goto err_free_mem;
+	} else {
+		kbd->mode = pdata->mode;
+		kbd->rep = pdata->rep;
+	}
 
 	kbd->res = request_mem_region(res->start, resource_size(res),
 				      pdev->name);
@@ -221,7 +253,7 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
 		goto err_put_clk;
 	}
 
-	if (pdata->rep)
+	if (kbd->rep)
 		__set_bit(EV_REP, input_dev->evbit);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
@@ -318,6 +350,14 @@ static int spear_kbd_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume);
 
+#ifdef CONFIG_OF
+static const struct of_device_id spear_kbd_id_table[] = {
+	{ .compatible = "st,spear300-kbd" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
+#endif
+
 static struct platform_driver spear_kbd_driver = {
 	.probe		= spear_kbd_probe,
 	.remove		= __devexit_p(spear_kbd_remove),
@@ -325,6 +365,7 @@ static struct platform_driver spear_kbd_driver = {
 		.name	= "keyboard",
 		.owner	= THIS_MODULE,
 		.pm	= &spear_kbd_pm_ops,
+		.of_match_table = of_match_ptr(spear_kbd_id_table),
 	},
 };
 module_platform_driver(spear_kbd_driver);
-- 
cgit v1.2.3-18-g5258


From 86809173ce32ef03bd4d0389dfc72df0c805e9c4 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 24 May 2012 01:10:20 -0700
Subject: Input: matrix-keymap - fix building keymaps

Keymaps used by drivers based on matrix-keymap facilities are arrays of
unsigned shorts, not chars. Treating them otherwise produces corrupted
keymaps.

Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/matrix-keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index db92c1ebfc5..443ad64b7f2 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -29,7 +29,7 @@ static bool matrix_keypad_map_key(struct input_dev *input_dev,
 				  unsigned int rows, unsigned int cols,
 				  unsigned int row_shift, unsigned int key)
 {
-	unsigned char *keymap = input_dev->keycode;
+	unsigned short *keymap = input_dev->keycode;
 	unsigned int row = KEY_ROW(key);
 	unsigned int col = KEY_COL(key);
 	unsigned short code = KEY_VAL(key);
-- 
cgit v1.2.3-18-g5258