From 126fa4b9ca5d9d7cb7d46f779ad3bd3631ca387c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 12 May 2005 20:09:17 -0400 Subject: [PATCH] r8169: incoming frame length check The size of the incoming frame is not correctly checked. The RxMaxSize register (0xDA) does not work as expected and incoming frames whose size exceeds the MTU actually end spanning multiple descriptors. The first Rx descriptor contains the size of the whole frame (or some garbage in its place). The driver does not expect something above the space allocated to the current skb and crashes loudly when it issues a skb_put. The fix contains two parts: - disable hardware Rx size filtering: so far it only proved to be able to trigger some new fancy errors; - drop multi-descriptors frame: as the driver allocates MTU sized Rx buffers, it provides an adequate filtering. As a bonus, wrong descriptors were not returned to the asic after their processing. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76..b3768d84474 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, while (rx_left > 0) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", + dev->name, status); tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + goto move_on; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - +move_on: cur_rx++; rx_left--; } -- cgit v1.2.3-70-g09d2 From b9a6eaffe7ff3d3481efa9fa353b2c6a02eda756 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 10 Apr 2005 20:27:45 +0200 Subject: [PATCH] 3c574_cs: disable interrupts in el3_close 3c574_cs forgets to disable interrupts during el3_close(). fix it by doing what 3c59x does. Signed-off-by: Daniel Ritz --- drivers/net/pcmcia/3c574_cs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41e51711480..c6e8b25f968 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) spin_lock_irqsave(&lp->window_lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); } link->open--; -- cgit v1.2.3-70-g09d2 From 780a87f71841932db8dbb0f1eb9daf3a973a6bd6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 30 May 2005 15:41:05 -0400 Subject: libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c. --- Documentation/DocBook/libata.tmpl | 58 ++++++++++++++++++++++++++------------- drivers/scsi/libata-core.c | 57 +++++++++++++++++++++++++++++--------- 2 files changed, 83 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 773ae9fd99d..41053aed41f 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -14,7 +14,7 @@ - 2003 + 2003-2005 Jeff Garzik @@ -144,15 +144,26 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); ->tf_load(), to be initiated in hardware. + +int (*check_atapi_dma) (struct ata_queued_cmd *qc); + + + +Allow low-level driver to filter ATA PACKET commands, returning a status +indicating whether or not it is OK to use DMA for the supplied PACKET +command. + + u8 (*check_status)(struct ata_port *ap); -void (*dev_select)(struct ata_port *ap, unsigned int device); +u8 (*check_altstatus)(struct ata_port *ap); +u8 (*check_err)(struct ata_port *ap); - Reads the Status ATA shadow register from hardware. On some - hardware, this has the side effect of clearing the interrupt - condition. + Reads the Status/AltStatus/Error ATA shadow register from + hardware. On some hardware, reading the Status register has + the side effect of clearing the interrupt condition. @@ -162,7 +173,8 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Issues the low-level hardware command(s) that causes one of N hardware devices to be considered 'selected' (active and - available for use) on the ATA bus. + available for use) on the ATA bus. This generally has no +meaning on FIS-based devices. @@ -180,12 +192,20 @@ void (*phy_reset) (struct ata_port *ap); void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); +void (*bmdma_stop) (struct ata_port *ap); +u8 (*bmdma_status) (struct ata_port *ap); - When setting up an IDE BMDMA transaction, these hooks arm - (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA - engine. +When setting up an IDE BMDMA transaction, these hooks arm +(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop) +the hardware's DMA engine. ->bmdma_status is used to read the standard +PCI IDE DMA Status register. + + + +These hooks are typically either no-ops, or simply not implemented, in +FIS-based drivers. @@ -205,9 +225,7 @@ int (*qc_issue) (struct ata_queued_cmd *qc); ->qc_issue is used to make a command active, once the hardware and S/G tables have been prepared. IDE BMDMA drivers use the helper function ata_qc_issue_prot() for taskfile protocol-based - dispatch. More advanced drivers roll their own ->qc_issue - implementation, using this as the "issue new ATA command to - hardware" hook. + dispatch. More advanced drivers implement their own ->qc_issue. @@ -215,8 +233,10 @@ void (*eng_timeout) (struct ata_port *ap); - This is a high level error handling function, called from the - error handling thread, when a command times out. +This is a high level error handling function, called from the +error handling thread, when a command times out. Most newer +hardware will implement its own error handling code here. IDE BMDMA +drivers may use the helper function ata_eng_timeout(). @@ -255,15 +275,15 @@ void (*host_stop) (struct ata_host_set *host_set); tasks. - ->host_stop() is called when the rmmod or hot unplug process - begins. The hook must stop all hardware interrupts, DMA - engines, etc. - - ->port_stop() is called after ->host_stop(). It's sole function is to release DMA/memory resources, now that they are no longer actively being used. + + ->host_stop() is called after all ->port_stop() calls +have completed. The hook must finalize hardware shutdown, release DMA +and other resources, etc. + diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 63d3f70d06e..4d707d06a5d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1241,10 +1241,14 @@ void ata_port_probe(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. * - * LOCKING: + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ void __sata_phy_reset(struct ata_port *ap) @@ -1289,10 +1293,13 @@ void __sata_phy_reset(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. * - * LOCKING: + * This function resets the SATA bus, and then probes + * the bus for devices. + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ void sata_phy_reset(struct ata_port *ap) @@ -1304,10 +1311,16 @@ void sata_phy_reset(struct ata_port *ap) } /** - * ata_port_disable - - * @ap: + * ata_port_disable - Disable port. + * @ap: Port to be disabled. * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_disable(struct ata_port *ap) @@ -1416,7 +1429,9 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * - * LOCKING: + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * + * LOCKING: None. Serialized during ata_bus_probe(). * */ static void ata_set_mode(struct ata_port *ap) @@ -1467,7 +1482,10 @@ err_out: * @tmout_pat: impatience timeout * @tmout: overall timeout * - * LOCKING: + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. * */ @@ -1556,7 +1574,7 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) * ata_bus_edd - * @ap: * - * LOCKING: + * LOCKING: None. Serialized during ata_bus_probe(). * */ @@ -1909,7 +1927,10 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * @ap: Port associated with device @dev * @dev: Device to which command will be sent * - * LOCKING: + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * + * LOCKING: None. Serialized during ata_bus_probe(). */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1981,7 +2002,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -2028,6 +2053,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * * LOCKING: * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise @@ -2046,6 +2075,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * + * Prepare ATA taskfile for submission. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ -- cgit v1.2.3-70-g09d2 From 0cba632b737fc2de76934137b8dccf92d9fa4d19 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 30 May 2005 19:49:12 -0400 Subject: libata: doc updates --- Documentation/DocBook/libata.tmpl | 40 +++++----- drivers/scsi/ata_piix.c | 16 ---- drivers/scsi/libata-core.c | 150 +++++++++++++++++++++++++++++--------- drivers/scsi/libata-scsi.c | 2 +- 4 files changed, 138 insertions(+), 70 deletions(-) (limited to 'drivers') diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 41053aed41f..77b4a223a86 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -58,26 +58,6 @@ - - Thanks - - The bulk of the ATA knowledge comes thanks to long conversations with - Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA - and SCSI specifications. - - - Thanks to Alan Cox for pointing out similarities - between SATA and SCSI, and in general for motivation to hack on - libata. - - - libata's device detection - method, ata_pio_devchk, and in general all the early probing was - based on extensive study of Hale Landis's probe/reset code in his - ATADRVR driver (www.ata-atapi.com). - - - libata Driver API @@ -314,4 +294,24 @@ and other resources, etc. !Idrivers/scsi/sata_sil.c + + Thanks + + The bulk of the ATA knowledge comes thanks to long conversations with + Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA + and SCSI specifications. + + + Thanks to Alan Cox for pointing out similarities + between SATA and SCSI, and in general for motivation to hack on + libata. + + + libata's device detection + method, ata_pio_devchk, and in general all the early probing was + based on extensive study of Hale Landis's probe/reset code in his + ATADRVR driver (www.ata-atapi.com). + + + diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 3867f91ef8c..c2b00c9d40a 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -663,15 +663,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, port_info, n_ports); } -/** - * piix_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init piix_init(void) { int rc; @@ -687,13 +678,6 @@ static int __init piix_init(void) return 0; } -/** - * piix_exit - - * - * LOCKING: - * - */ - static void __exit piix_exit(void) { pci_unregister_driver(&piix_pci_driver); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4d707d06a5d..31b2984f379 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1190,7 +1190,12 @@ err_out: * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, non-zero on error. @@ -1229,10 +1234,14 @@ err_out: } /** - * ata_port_probe - - * @ap: + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_probe(struct ata_port *ap) @@ -1248,7 +1257,8 @@ void ata_port_probe(struct ata_port *ap) * PHY registers, to wake up the phy (and device), and * clear any reset condition. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ void __sata_phy_reset(struct ata_port *ap) @@ -1299,7 +1309,8 @@ void __sata_phy_reset(struct ata_port *ap) * This function resets the SATA bus, and then probes * the bus for devices. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ void sata_phy_reset(struct ata_port *ap) @@ -1431,7 +1442,8 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ static void ata_set_mode(struct ata_port *ap) @@ -1571,10 +1583,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) } /** - * ata_bus_edd - - * @ap: + * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. + * @ap: Port to reset and probe + * + * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and + * probe the bus. Not often used these days. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. * */ @@ -1651,8 +1667,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the device is ATA or ATAPI. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * PCI/etc. bus probe sem. + * Obtains host_set lock. * * SIDE EFFECTS: * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. @@ -1894,7 +1910,11 @@ static int fgb(u32 bitmap) * @xfer_mode_out: (output) SET FEATURES - XFER MODE code * @xfer_shift_out: (output) bit shift that selects this mode * + * Based on host and device capabilities, determine the + * maximum transfer mode that is amenable to all. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, negative on error. @@ -1930,7 +1950,8 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * Issue SET FEATURES - XFER MODE command to device @dev * on port @ap. * - * LOCKING: None. Serialized during ata_bus_probe(). + * LOCKING: + * PCI/etc. bus probe sem. */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1968,10 +1989,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_sg_clean - - * @qc: + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. * * LOCKING: + * spin_lock_irqsave(host_set lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -2058,6 +2082,8 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * supplied PACKET command. * * LOCKING: + * spin_lock_irqsave(host_set lock) + * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ @@ -2088,6 +2114,19 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2105,6 +2144,20 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) sg->length = buflen; } +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2114,14 +2167,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } /** - * ata_sg_setup_one - - * @qc: + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: - * + * Zero on success, negative on error. */ static int ata_sg_setup_one(struct ata_queued_cmd *qc) @@ -2146,13 +2201,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } /** - * ata_sg_setup - - * @qc: + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: + * Zero on success, negative on error. * */ @@ -2182,6 +2240,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * @ap: * * LOCKING: + * None. (executing in kernel thread context) * * RETURNS: * @@ -2229,6 +2288,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_complete (struct ata_port *ap) @@ -2446,6 +2506,7 @@ err_out: * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_block(struct ata_port *ap) @@ -2614,6 +2675,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, * transaction completed successfully. * * LOCKING: + * Inherited from SCSI layer (none, can sleep) */ static void ata_qc_timeout(struct ata_queued_cmd *qc) @@ -2723,6 +2785,7 @@ out: * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) @@ -2748,6 +2811,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, @@ -2812,6 +2876,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * in case something prevents using it. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ void ata_qc_free(struct ata_queued_cmd *qc) @@ -2825,9 +2890,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @drv_stat: ATA status register contents + * @drv_stat: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ @@ -3234,13 +3303,18 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line - * @dev_instance: pointer to our host information structure + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure * @regs: unused * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * * LOCKING: + * Obtains host_set lock during operation. * * RETURNS: + * IRQ_NONE or IRQ_HANDLED. * */ @@ -3381,7 +3455,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * * LOCKING: + * Inherited from caller. * */ @@ -3436,9 +3514,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host * + * Attach low-level ATA driver to system. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * New ata_port on success, for NULL on error. * */ @@ -3471,12 +3553,22 @@ err_out: } /** - * ata_device_add - - * @ent: + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * Number of ports registered. Zero on error (no ports registered). * */ @@ -3755,6 +3847,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * Inherited from PCI layer (may sleep). * * RETURNS: + * Zero on success, negative on errno-based value on error. * */ @@ -3974,15 +4067,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) #endif /* CONFIG_PCI */ -/** - * ata_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init ata_init(void) { ata_wq = create_workqueue("ata"); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 416ba67ba9e..7a4adc4c8f0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -947,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_noop - + * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. -- cgit v1.2.3-70-g09d2 From 3087e1ff8d64da7b6b527e89d0c0864ab36294b8 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 2 Jun 2005 13:03:15 -0700 Subject: [ATM]: fix ATM makefile for out-of-source-tree builds Signed-off-by: Jan Beulich Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index d1dcd8eae3c..5b77188527a 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y) fore_200e-objs += fore200e_pca_fw.o # guess the target endianess to choose the right PCA-200E firmware image ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y) - CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi) + byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h + CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2) endif endif -- cgit v1.2.3-70-g09d2 From a2c1aa54746bace5d03cc66521fbf3bb6fb2f916 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 2 Jun 2005 13:04:07 -0700 Subject: [ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- drivers/atm/fore200e.c | 6 ++---- drivers/atm/he.c | 6 ++---- drivers/atm/nicstar.c | 20 ++++++++++---------- drivers/atm/zatm.c | 11 ++++------- 4 files changed, 18 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 9e65bfb85ba..5f702199543 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e) switch(fore200e->state) { case FORE200E_STATE_COMPLETE: - if (fore200e->stats) - kfree(fore200e->stats); + kfree(fore200e->stats); case FORE200E_STATE_IRQ: free_irq(fore200e->irq, fore200e->atm_dev); @@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e) entry, txq->tail, entry->vc_map, entry->skb); /* free copy of misaligned data */ - if (entry->data) - kfree(entry->data); + kfree(entry->data); /* remove DMA mapping */ fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 3022c548a13..df2c83fd549 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) init_one_failure: if (atm_dev) atm_dev_deregister(atm_dev); - if (he_dev) - kfree(he_dev); + kfree(he_dev); pci_disable_device(pci_dev); return err; } @@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc) open_failed: if (err) { - if (he_vcc) - kfree(he_vcc); + kfree(he_vcc); clear_bit(ATM_VF_ADDR, &vcc->flags); } else diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 85bf5c8442b..b2a7b754fd1 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev) PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base); /* Initialize SCQ0, the only VBR SCQ used */ - card->scq1 = (scq_info *) NULL; - card->scq2 = (scq_info *) NULL; + card->scq1 = NULL; + card->scq2 = NULL; card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0); - if (card->scq0 == (scq_info *) NULL) + if (card->scq0 == NULL) { printk("nicstar%d: can't get SCQ0.\n", i); error = 12; @@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd) int i; if (size != VBR_SCQSIZE && size != CBR_SCQSIZE) - return (scq_info *) NULL; + return NULL; scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL); - if (scq == (scq_info *) NULL) - return (scq_info *) NULL; + if (scq == NULL) + return NULL; scq->org = kmalloc(2 * size, GFP_KERNEL); if (scq->org == NULL) { kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) * (size / NS_SCQE_SIZE), GFP_KERNEL); - if (scq->skb == (struct sk_buff **) NULL) + if (scq->skb == NULL) { kfree(scq->org); kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->num_entries = size / NS_SCQE_SIZE; scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size); @@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc) vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE; scq = get_scq(CBR_SCQSIZE, vc->cbr_scd); - if (scq == (scq_info *) NULL) + if (scq == NULL) { PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index); card->scd2vc[frscdi] = NULL; diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 47a800519ad..8d5e65cb975 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc) zatm_dev->tx_bw += vcc->qos.txtp.min_pcr; dealloc_shaper(vcc->dev,zatm_vcc->shaper); } - if (zatm_vcc->ring) kfree(zatm_vcc->ring); + kfree(zatm_vcc->ring); } @@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev) return 0; out: for (i = 0; i < NR_MBX; i++) - if (zatm_dev->mbx_start[i] != 0) - kfree((void *) zatm_dev->mbx_start[i]); - if (zatm_dev->rx_map != NULL) - kfree(zatm_dev->rx_map); - if (zatm_dev->tx_map != NULL) - kfree(zatm_dev->tx_map); + kfree(zatm_dev->mbx_start[i]); + kfree(zatm_dev->rx_map); + kfree(zatm_dev->tx_map); free_irq(zatm_dev->irq, dev); return error; } -- cgit v1.2.3-70-g09d2 From 0fd56f67890acf7904c83e7de6cb71723eb1c962 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 2 Jun 2005 14:04:00 -0700 Subject: [PATCH] drivers/net/hamradio/baycom_epp.c: cleanups The times when tricky goto's produced better codes are long gone. This patch should express the same in a better way. (Also fixes the final gcc-4.0 x86 compile error) Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/hamradio/baycom_epp.c | 126 +++++++++++--------------------------- 1 file changed, 36 insertions(+), 90 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 1c563f905a5..a7f15d9f13e 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc, } /* --------------------------------------------------------------------- */ -/* - * high performance HDLC encoder - * yes, it's ugly, but generates pretty good code - */ - -#define ENCODEITERA(j) \ -({ \ - if (!(notbitstream & (0x1f0 << j))) \ - goto stuff##j; \ - encodeend##j: ; \ -}) - -#define ENCODEITERB(j) \ -({ \ - stuff##j: \ - bitstream &= ~(0x100 << j); \ - bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \ - ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \ - numbit++; \ - notbitstream = ~bitstream; \ - goto encodeend##j; \ -}) - static void encode_hdlc(struct baycom_state *bc) { @@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc) int pkt_len; unsigned bitstream, notbitstream, bitbuf, numbit, crc; unsigned char crcarr[2]; + int j; if (bc->hdlctx.bufcnt > 0) return; @@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc) pkt_len--; if (!pkt_len) bp = crcarr; - ENCODEITERA(0); - ENCODEITERA(1); - ENCODEITERA(2); - ENCODEITERA(3); - ENCODEITERA(4); - ENCODEITERA(5); - ENCODEITERA(6); - ENCODEITERA(7); - goto enditer; - ENCODEITERB(0); - ENCODEITERB(1); - ENCODEITERB(2); - ENCODEITERB(3); - ENCODEITERB(4); - ENCODEITERB(5); - ENCODEITERB(6); - ENCODEITERB(7); - enditer: + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } numbit += 8; while (numbit >= 8) { *wp++ = bitbuf; @@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev) bc->stats.rx_packets++; } -#define DECODEITERA(j) \ -({ \ - if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \ - goto flgabrt##j; \ - if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \ - goto stuff##j; \ - enditer##j: ; \ -}) - -#define DECODEITERB(j) \ -({ \ - flgabrt##j: \ - if (!(notbitstream & (0x1fc << j))) { /* abort received */ \ - state = 0; \ - goto enditer##j; \ - } \ - if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \ - goto enditer##j; \ - if (state) \ - do_rxpacket(dev); \ - bc->hdlcrx.bufcnt = 0; \ - bc->hdlcrx.bufptr = bc->hdlcrx.buf; \ - state = 1; \ - numbits = 7-j; \ - goto enditer##j; \ - stuff##j: \ - numbits--; \ - bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \ - goto enditer##j; \ -}) - static int receive(struct net_device *dev, int cnt) { struct baycom_state *bc = netdev_priv(dev); @@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt) unsigned char tmp[128]; unsigned char *cp; int cnt2, ret = 0; + int j; numbits = bc->hdlcrx.numbits; state = bc->hdlcrx.state; @@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt) bitbuf |= (*cp) << 8; numbits += 8; notbitstream = ~bitstream; - DECODEITERA(0); - DECODEITERA(1); - DECODEITERA(2); - DECODEITERA(3); - DECODEITERA(4); - DECODEITERA(5); - DECODEITERA(6); - DECODEITERA(7); - goto enddec; - DECODEITERB(0); - DECODEITERB(1); - DECODEITERB(2); - DECODEITERB(3); - DECODEITERB(4); - DECODEITERB(5); - DECODEITERB(6); - DECODEITERB(7); - enddec: + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* not flag received */ + else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } while (state && numbits >= 8) { if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { state = 0; -- cgit v1.2.3-70-g09d2 From 0baab86b00cdf9785ac2bb2ce1ab63995b3866ca Mon Sep 17 00:00:00 2001 From: Edward Falk Date: Thu, 2 Jun 2005 18:17:13 -0400 Subject: libata: update inline source docs --- drivers/scsi/libata-core.c | 283 +++++++++++++++++++++++++++++++++++++++++++-- include/linux/libata.h | 58 ++++++++++ 2 files changed, 334 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 31b2984f379..86e84ed87be 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_wait_idle(ap); } + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_exec_command - issue ATA command to host controller + * ata_exec_command_pio - issue ATA command to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Issues PIO/MMIO write to ATA command register, with proper + * Issues PIO write to ATA command register, with proper * synchronization with interrupt handler / other threads. * * LOCKING: @@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_pause(ap); } + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_tf_read - input device's ATA taskfile shadow registers + * ata_tf_read_pio - input device's ATA taskfile shadow registers * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * @@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) } } + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * and return it's value. This also clears pending interrupts + * and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * via MMIO and return it's value. This also clears pending interrupts + * via MMIO and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap) return readb((void __iomem *) ap->ioaddr.status_addr); } + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_check_status(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) @@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap) return ata_check_status_pio(ap); } + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_altstatus(struct ata_port *ap) { if (ap->ops->check_altstatus) @@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap) return inb(ap->ioaddr.altstatus_addr); } + +/** + * ata_chk_err - Read device error reg + * @ap: port where the device is + * + * Reads ATA taskfile error register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_err() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_chk_err(struct ata_port *ap) { if (ap->ops->check_err) @@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s, } } + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) { } + /** * ata_std_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * * Use the method defined in the ATA specification to * make either device 0, or device 1, active on the - * ATA channel. + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. * * LOCKING: * caller. @@ -2127,6 +2236,19 @@ void ata_qc_prep(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ + + +/** + * ata_sg_init_one - Prepare a one-entry scatter-gather list. + * @qc: Queued command + * @buf: transfer buffer + * @buflen: length of buf + * + * Builds a single-entry scatter-gather list to initiate a + * transfer utilizing the specified buffer. + * + * LOCKING: + */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2158,6 +2280,18 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) * spin_lock_irqsave(host_set lock) */ + +/** + * ata_sg_init - Assign a scatter gather list to a queued command + * @qc: Queued command + * @sg: Scatter-gather list + * @n_elem: length of sg list + * + * Attaches a scatter-gather list to a queued command. + * + * LOCKING: + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2331,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap) ata_qc_complete(qc, drv_stat); } + +/** + * swap_buf_le16 - + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { #ifdef __BIG_ENDIAN @@ -2992,6 +3138,7 @@ err_out: return -1; } + /** * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner * @qc: command to issue to device @@ -3001,6 +3148,8 @@ err_out: * classes called "protocols", and issuing each type of protocol * is slightly different. * + * May be used as the qc_issue() entry in ata_port_operations. + * * LOCKING: * spin_lock_irqsave(host_set lock) * @@ -3058,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) } /** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3165,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_start(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3173,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) ata_bmdma_start_pio(qc); } + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3181,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) ata_bmdma_setup_pio(qc); } + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @qc: Info associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_irq_clear(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3193,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap) } + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @qc: Info associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + u8 ata_bmdma_status(struct ata_port *ap) { u8 host_stat; @@ -3204,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap) return host_stat; } + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Info associated with this ATA transaction. + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_stop(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3407,6 +3621,19 @@ err_out: ata_qc_complete(qc, ATA_ERR); } + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3420,6 +3647,18 @@ int ata_port_start (struct ata_port *ap) return 0; } + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + */ + void ata_port_stop (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3720,7 +3959,15 @@ int ata_scsi_release(struct Scsi_Host *host) /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. */ + void ata_std_ports(struct ata_ioports *ioaddr) { ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; @@ -3762,6 +4009,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) return probe_ent; } + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + */ + #ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) @@ -3843,6 +4104,14 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * @port_info: Information from low-level host driver * @n_ports: Number of ports attached to host controller * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * * LOCKING: * Inherited from PCI layer (may sleep). * diff --git a/include/linux/libata.h b/include/linux/libata.h index 1f7e2039a04..ad410590664 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -466,12 +466,34 @@ static inline u8 ata_chk_status(struct ata_port *ap) return ap->ops->check_status(ap); } + +/** + * ata_pause - Flush writes and pause 400 nanoseconds. + * @ap: Port to wait for. + * + * LOCKING: + * Inherited from caller. + */ + static inline void ata_pause(struct ata_port *ap) { ata_altstatus(ap); ndelay(400); } + +/** + * ata_busy_wait - Wait for a port status register + * @ap: Port to wait for. + * + * Waits up to max*10 microseconds for the selected bits in the port's + * status register to be cleared. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, unsigned int max) { @@ -486,6 +508,18 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits, return status; } + +/** + * ata_wait_idle - Wait for a port to be idle. + * @ap: Port to wait for. + * + * Waits up to 10ms for port's BUSY and DRQ signals to clear. + * Returns final value of status register. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_wait_idle(struct ata_port *ap) { u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); @@ -524,6 +558,18 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns tf->device = ATA_DEVICE_OBS | ATA_DEV1; } + +/** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ + static inline u8 ata_irq_on(struct ata_port *ap) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -543,6 +589,18 @@ static inline u8 ata_irq_on(struct ata_port *ap) return tmp; } + +/** + * ata_irq_ack - Acknowledge a device interrupt. + * @ap: Port on which interrupts are enabled. + * + * Wait up to 10 ms for legacy IDE device to become idle (BUSY + * or BUSY+DRQ clear). Obtain dma status and port status from + * device. Clear the interrupt. Return port status. + * + * LOCKING: + */ + static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) { unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; -- cgit v1.2.3-70-g09d2 From decc6d0b68f27bbb8a0357fccf41936a3c196b03 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 2 Jun 2005 18:42:33 -0400 Subject: libata: kernel-doc warning fixes --- drivers/scsi/libata-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 86e84ed87be..a5d7c33a434 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3359,7 +3359,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) /** * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Clear interrupt and error flags in DMA status register. * @@ -3384,7 +3384,7 @@ void ata_bmdma_irq_clear(struct ata_port *ap) /** * ata_bmdma_status - Read PCI IDE BMDMA status - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Read and return BMDMA status register. * @@ -3408,7 +3408,7 @@ u8 ata_bmdma_status(struct ata_port *ap) /** * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Info associated with this ATA transaction. + * @ap: Port associated with this ATA transaction. * * Clears the ATA_DMA_START flag in the dma control register * -- cgit v1.2.3-70-g09d2 From b597ef4712c05c962640a655386a7f06cc1a1fbc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 2 Jun 2005 16:36:00 -0700 Subject: [NET]: Fix locking in shaper driver. o use a semaphore instead of an opencoded and racy lock o move locking out of shaper_kick and into the callers - most just released the lock before calling shaper_kick o remove in_interrupt() tests. from ->close we can always block, from ->hard_start_xmit and timer context never Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/net/shaper.c | 86 +++++++++++------------------------------------ include/linux/if_shaper.h | 3 +- 2 files changed, 20 insertions(+), 69 deletions(-) (limited to 'drivers') diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c index e68cf5fb492..20edeb34579 100644 --- a/drivers/net/shaper.c +++ b/drivers/net/shaper.c @@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */ #define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n" -/* - * Locking - */ - -static int shaper_lock(struct shaper *sh) -{ - /* - * Lock in an interrupt must fail - */ - while (test_and_set_bit(0, &sh->locked)) - { - if (!in_interrupt()) - sleep_on(&sh->wait_queue); - else - return 0; - - } - return 1; -} - static void shaper_kick(struct shaper *sh); -static void shaper_unlock(struct shaper *sh) -{ - clear_bit(0, &sh->locked); - wake_up(&sh->wait_queue); - shaper_kick(sh); -} - /* * Compute clocks on a buffer */ @@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec) * Throw a frame at a shaper. */ -static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) + +static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct shaper *shaper = dev->priv; struct sk_buff *ptr; - /* - * Get ready to work on this shaper. Lock may fail if its - * an interrupt and locked. - */ - - if(!shaper_lock(shaper)) - return -1; + if (down_trylock(&shaper->sem)) + return -1; + ptr=shaper->sendq.prev; /* @@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) dev_kfree_skb(ptr); shaper->stats.collisions++; } - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); return 0; } @@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb) static void shaper_timer(unsigned long data) { - struct shaper *sh=(struct shaper *)data; - shaper_kick(sh); + struct shaper *shaper = (struct shaper *)data; + + if (!down_trylock(&shaper->sem)) { + shaper_kick(shaper); + up(&shaper->sem); + } else + mod_timer(&shaper->timer, jiffies); } /* @@ -310,19 +287,6 @@ static void shaper_kick(struct shaper *shaper) { struct sk_buff *skb; - /* - * Shaper unlock will kick - */ - - if (test_and_set_bit(0, &shaper->locked)) - { - if(sh_debug) - printk("Shaper locked.\n"); - mod_timer(&shaper->timer, jiffies); - return; - } - - /* * Walk the list (may be empty) */ @@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper) if(skb!=NULL) mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock); - - clear_bit(0, &shaper->locked); } @@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper) static void shaper_flush(struct shaper *shaper) { struct sk_buff *skb; - if(!shaper_lock(shaper)) - { - printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n"); - return; - } + + down(&shaper->sem); while((skb=skb_dequeue(&shaper->sendq))!=NULL) dev_kfree_skb(skb); - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); } /* @@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev) * ARP and other resolutions and not before. */ - -static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct shaper *sh=dev->priv; - return shaper_qframe(sh, skb); -} - static struct net_device_stats *shaper_get_stats(struct net_device *dev) { struct shaper *sh=dev->priv; @@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev) init_timer(&sh->timer); sh->timer.function=shaper_timer; sh->timer.data=(unsigned long)sh; - init_waitqueue_head(&sh->wait_queue); } /* diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h index 0485b256d04..004e6f09a6e 100644 --- a/include/linux/if_shaper.h +++ b/include/linux/if_shaper.h @@ -23,7 +23,7 @@ struct shaper __u32 shapeclock; unsigned long recovery; /* Time we can next clock a packet out on an empty queue */ - unsigned long locked; + struct semaphore sem; struct net_device_stats stats; struct net_device *dev; int (*hard_start_xmit) (struct sk_buff *skb, @@ -38,7 +38,6 @@ struct shaper int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh); void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr); struct net_device_stats* (*get_stats)(struct net_device *dev); - wait_queue_head_t wait_queue; struct timer_list timer; }; -- cgit v1.2.3-70-g09d2 From f4800078d9ed4bd20b1b27f56e7b68cfa0d73038 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sun, 1 May 2005 16:05:40 -0700 Subject: [PATCH] USB: Support multiply-LUN devices in ub Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman diff -urp -X dontdiff linux-2.6.12-rc3/drivers/block/ub.c linux-2.6.12-rc3-lem/drivers/block/ub.c --- drivers/block/ub.c | 598 ++++++++++++++++++++++++++++++++--------------------- 1 file changed, 363 insertions(+), 235 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ce42889f98f..adc4dcc306f 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -8,13 +8,12 @@ * and is not licensed separately. See file COPYING for details. * * TODO (sorted by decreasing priority) + * -- Kill first_open (Al Viro fixed the block layer now) * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) - * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries * -- verify the 13 conditions and do bulk resets - * -- normal pool of commands instead of cmdv[]? * -- kill last_pipe and simply do two-state clearing on both pipes * -- verify protocol (bulk) from USB descriptors (maybe...) * -- highmem and sg @@ -49,7 +48,14 @@ #define US_SC_SCSI 0x06 /* Transparent */ /* + * This many LUNs per USB device. + * Every one of them takes a host, see UB_MAX_HOSTS. */ +#define UB_MAX_LUNS 4 + +/* + */ + #define UB_MINORS_PER_MAJOR 8 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ @@ -65,7 +71,7 @@ struct bulk_cb_wrap { u32 Tag; /* unique per command id */ __le32 DataTransferLength; /* size of data */ u8 Flags; /* direction in bit 0 */ - u8 Lun; /* LUN normally 0 */ + u8 Lun; /* LUN */ u8 Length; /* of of the CDB */ u8 CDB[UB_MAX_CDB_SIZE]; /* max command */ }; @@ -168,6 +174,7 @@ struct ub_scsi_cmd { unsigned int len; /* Requested length */ // struct scatterlist sgv[UB_MAX_REQ_SG]; + struct ub_lun *lun; void (*done)(struct ub_dev *, struct ub_scsi_cmd *); void *back; }; @@ -252,25 +259,47 @@ struct ub_scsi_cmd_queue { }; /* - * The UB device instance. + * The block device instance (one per LUN). + */ +struct ub_lun { + struct ub_dev *udev; + struct list_head link; + struct gendisk *disk; + int id; /* Host index */ + int num; /* LUN number */ + char name[16]; + + int changed; /* Media was changed */ + int removable; + int readonly; + int first_open; /* Kludge. See ub_bd_open. */ + + /* Use Ingo's mempool if or when we have more than one command. */ + /* + * Currently we never need more than one command for the whole device. + * However, giving every LUN a command is a cheap and automatic way + * to enforce fairness between them. + */ + int cmda[1]; + struct ub_scsi_cmd cmdv[1]; + + struct ub_capacity capacity; +}; + +/* + * The USB device instance. */ struct ub_dev { spinlock_t lock; - int id; /* Number among ub's */ atomic_t poison; /* The USB device is disconnected */ int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ unsigned int tagcnt; - int changed; /* Media was changed */ - int removable; - int readonly; - int first_open; /* Kludge. See ub_bd_open. */ - char name[8]; + char name[12]; struct usb_device *dev; struct usb_interface *intf; - struct ub_capacity capacity; - struct gendisk *disk; + struct list_head luns; unsigned int send_bulk_pipe; /* cached pipe values */ unsigned int recv_bulk_pipe; @@ -279,10 +308,6 @@ struct ub_dev { struct tasklet_struct tasklet; - /* XXX Use Ingo's mempool (once we have more than one) */ - int cmda[1]; - struct ub_scsi_cmd cmdv[1]; - struct ub_scsi_cmd_queue cmd_queue; struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */ unsigned char top_sense[UB_SENSE_SIZE]; @@ -301,9 +326,9 @@ struct ub_dev { /* */ static void ub_cleanup(struct ub_dev *sc); -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq); +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq); +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq); static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, struct request *rq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); @@ -320,8 +345,10 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); -static int ub_sync_tur(struct ub_dev *sc); -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret); +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret); +static int ub_probe_lun(struct ub_dev *sc, int lnum); /* */ @@ -342,6 +369,7 @@ MODULE_DEVICE_TABLE(usb, ub_usb_ids); */ #define UB_MAX_HOSTS 26 static char ub_hostv[UB_MAX_HOSTS]; + static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */ /* @@ -406,6 +434,8 @@ static ssize_t ub_diag_show(struct device *dev, char *page) { struct usb_interface *intf; struct ub_dev *sc; + struct list_head *p; + struct ub_lun *lun; int cnt; unsigned long flags; int nc, nh; @@ -421,9 +451,15 @@ static ssize_t ub_diag_show(struct device *dev, char *page) spin_lock_irqsave(&sc->lock, flags); cnt += sprintf(page + cnt, - "qlen %d qmax %d changed %d removable %d readonly %d\n", - sc->cmd_queue.qlen, sc->cmd_queue.qmax, - sc->changed, sc->removable, sc->readonly); + "qlen %d qmax %d\n", + sc->cmd_queue.qlen, sc->cmd_queue.qmax); + + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + cnt += sprintf(page + cnt, + "lun %u changed %d removable %d readonly %d\n", + lun->num, lun->changed, lun->removable, lun->readonly); + } if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0; for (j = 0; j < SCMD_TRACE_SZ; j++) { @@ -523,53 +559,63 @@ static void ub_put(struct ub_dev *sc) */ static void ub_cleanup(struct ub_dev *sc) { + struct list_head *p; + struct ub_lun *lun; request_queue_t *q; - /* I don't think queue can be NULL. But... Stolen from sx8.c */ - if ((q = sc->disk->queue) != NULL) - blk_cleanup_queue(q); + while (!list_empty(&sc->luns)) { + p = sc->luns.next; + lun = list_entry(p, struct ub_lun, link); + list_del(p); - /* - * If we zero disk->private_data BEFORE put_disk, we have to check - * for NULL all over the place in open, release, check_media and - * revalidate, because the block level semaphore is well inside the - * put_disk. But we cannot zero after the call, because *disk is gone. - * The sd.c is blatantly racy in this area. - */ - /* disk->private_data = NULL; */ - put_disk(sc->disk); - sc->disk = NULL; + /* I don't think queue can be NULL. But... Stolen from sx8.c */ + if ((q = lun->disk->queue) != NULL) + blk_cleanup_queue(q); + /* + * If we zero disk->private_data BEFORE put_disk, we have + * to check for NULL all over the place in open, release, + * check_media and revalidate, because the block level + * semaphore is well inside the put_disk. + * But we cannot zero after the call, because *disk is gone. + * The sd.c is blatantly racy in this area. + */ + /* disk->private_data = NULL; */ + put_disk(lun->disk); + lun->disk = NULL; + + ub_id_put(lun->id); + kfree(lun); + } - ub_id_put(sc->id); kfree(sc); } /* * The "command allocator". */ -static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc) +static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun) { struct ub_scsi_cmd *ret; - if (sc->cmda[0]) + if (lun->cmda[0]) return NULL; - ret = &sc->cmdv[0]; - sc->cmda[0] = 1; + ret = &lun->cmdv[0]; + lun->cmda[0] = 1; return ret; } -static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd) +static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd) { - if (cmd != &sc->cmdv[0]) { + if (cmd != &lun->cmdv[0]) { printk(KERN_WARNING "%s: releasing a foreign cmd %p\n", - sc->name, cmd); + lun->name, cmd); return; } - if (!sc->cmda[0]) { - printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name); + if (!lun->cmda[0]) { + printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name); return; } - sc->cmda[0] = 0; + lun->cmda[0] = 0; } /* @@ -630,29 +676,30 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc) static void ub_bd_rq_fn(request_queue_t *q) { - struct ub_dev *sc = q->queuedata; + struct ub_lun *lun = q->queuedata; struct request *rq; while ((rq = elv_next_request(q)) != NULL) { - if (ub_bd_rq_fn_1(sc, rq) != 0) { + if (ub_bd_rq_fn_1(lun, rq) != 0) { blk_stop_queue(q); break; } } } -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq) { + struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; int rc; - if (atomic_read(&sc->poison) || sc->changed) { + if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); ub_end_rq(rq, 0); return 0; } - if ((cmd = ub_get_cmd(sc)) == NULL) + if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); @@ -661,32 +708,30 @@ static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) if (blk_pc_request(rq)) { rc = ub_cmd_build_packet(sc, cmd, rq); } else { - rc = ub_cmd_build_block(sc, cmd, rq); + rc = ub_cmd_build_block(sc, lun, cmd, rq); } if (rc != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } - cmd->state = UB_CMDST_INIT; + cmd->lun = lun; cmd->done = ub_rw_cmd_done; cmd->back = rq; cmd->tag = sc->tagcnt++; if ((rc = ub_submit_scsi(sc, cmd)) != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq) +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq) { int ub_dir; #if 0 /* We use rq->buffer for now */ @@ -707,7 +752,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, sg = &cmd->sgv[0]; n_elem = blk_rq_map_sg(q, rq, sg); if (n_elem <= 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; /* request with no s/g entries? */ @@ -716,7 +761,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, if (n_elem != 1) { /* Paranoia */ printk(KERN_WARNING "%s: request with %d segments\n", sc->name, n_elem); - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; @@ -748,8 +793,8 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, * The call to blk_queue_hardsect_size() guarantees that request * is aligned, but it is given in terms of 512 byte units, always. */ - block = rq->sector >> sc->capacity.bshift; - nblks = rq->nr_sectors >> sc->capacity.bshift; + block = rq->sector >> lun->capacity.bshift; + nblks = rq->nr_sectors >> lun->capacity.bshift; cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ @@ -803,7 +848,8 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct request *rq = cmd->back; - struct gendisk *disk = sc->disk; + struct ub_lun *lun = cmd->lun; + struct gendisk *disk = lun->disk; request_queue_t *q = disk->queue; int uptodate; @@ -818,7 +864,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) else uptodate = 0; - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(q); } @@ -887,7 +933,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) bcb->Tag = cmd->tag; /* Endianness is not important */ bcb->DataTransferLength = cpu_to_le32(cmd->len); bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0; - bcb->Lun = 0; /* No multi-LUN yet */ + bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0; bcb->Length = cmd->cdb_len; /* copy the command payload */ @@ -1002,9 +1048,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1025,9 +1070,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1046,9 +1090,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1107,9 +1150,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1140,9 +1182,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1164,9 +1205,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * encounter such a thing, try to read the CSW again. */ if (++cmd->stat_count >= 4) { - printk(KERN_NOTICE "%s: " - "unable to get CSW on device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: unable to get CSW\n", + sc->name); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1207,10 +1247,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) */ if (++cmd->stat_count >= 4) { printk(KERN_NOTICE "%s: " - "tag mismatch orig 0x%x reply 0x%x " - "on device %u\n", - sc->name, cmd->tag, bcs->Tag, - sc->dev->devnum); + "tag mismatch orig 0x%x reply 0x%x\n", + sc->name, cmd->tag, bcs->Tag); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1244,8 +1282,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else { printk(KERN_WARNING "%s: " - "wrong command state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "wrong command state %d\n", + sc->name, cmd->state); goto Bad_End; } return; @@ -1288,7 +1326,6 @@ static void __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { /* XXX Clear stalls */ - printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */ ub_complete(&sc->work_done); ub_state_done(sc, cmd, rc); return; @@ -1333,6 +1370,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scmd->state = UB_CMDST_INIT; scmd->data = sc->top_sense; scmd->len = UB_SENSE_SIZE; + scmd->lun = cmd->lun; scmd->done = ub_top_sense_done; scmd->back = cmd; @@ -1411,14 +1449,14 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) } if (cmd != scmd->back) { printk(KERN_WARNING "%s: " - "sense done for wrong command 0x%x on device %u\n", - sc->name, cmd->tag, sc->dev->devnum); + "sense done for wrong command 0x%x\n", + sc->name, cmd->tag); return; } if (cmd->state != UB_CMDST_SENSE) { printk(KERN_WARNING "%s: " - "sense done with bad cmd state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "sense done with bad cmd state %d\n", + sc->name, cmd->state); return; } @@ -1429,68 +1467,32 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) ub_scsi_urb_compl(sc, cmd); } -#if 0 -/* Determine what the maximum LUN supported is */ -int usb_stor_Bulk_max_lun(struct us_data *us) -{ - int result; - - /* issue the command */ - result = usb_stor_control_msg(us, us->recv_ctrl_pipe, - US_BULK_GET_MAX_LUN, - USB_DIR_IN | USB_TYPE_CLASS | - USB_RECIP_INTERFACE, - 0, us->ifnum, us->iobuf, 1, HZ); - - /* - * Some devices (i.e. Iomega Zip100) need this -- apparently - * the bulk pipes get STALLed when the GetMaxLUN request is - * processed. This is, in theory, harmless to all other devices - * (regardless of if they stall or not). - */ - if (result < 0) { - usb_stor_clear_halt(us, us->recv_bulk_pipe); - usb_stor_clear_halt(us, us->send_bulk_pipe); - } - - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); - - /* if we have a successful request, return the result */ - if (result == 1) - return us->iobuf[0]; - - /* return the default -- no LUNs */ - return 0; -} -#endif - /* * This is called from a process context. */ -static void ub_revalidate(struct ub_dev *sc) +static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) { - sc->readonly = 0; /* XXX Query this from the device */ + lun->readonly = 0; /* XXX Query this from the device */ - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; - if (ub_sync_tur(sc) != 0) + if (ub_sync_tur(sc, lun) != 0) return; /* Not ready */ - sc->changed = 0; + lun->changed = 0; - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { /* * The retry here means something is wrong, either with the * device, with the transport, or with our code. * We keep this because sd.c has retries for capacity. */ - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; } } } @@ -1503,12 +1505,15 @@ static void ub_revalidate(struct ub_dev *sc) static int ub_bd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; + struct ub_lun *lun; struct ub_dev *sc; unsigned long flags; int rc; - if ((sc = disk->private_data) == NULL) + if ((lun = disk->private_data) == NULL) return -ENXIO; + sc = lun->udev; + spin_lock_irqsave(&ub_lock, flags); if (atomic_read(&sc->poison)) { spin_unlock_irqrestore(&ub_lock, flags); @@ -1529,15 +1534,15 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * The bottom line is, Al Viro says that we should not allow * bdev->bd_invalidated to be set when doing add_disk no matter what. */ - if (sc->first_open) { - if (sc->changed) { - sc->first_open = 0; + if (lun->first_open) { + lun->first_open = 0; + if (lun->changed) { rc = -ENOMEDIUM; goto err_open; } } - if (sc->removable || sc->readonly) + if (lun->removable || lun->readonly) check_disk_change(inode->i_bdev); /* @@ -1545,12 +1550,12 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * under some pretty murky conditions (a failure of READ CAPACITY). * We may need it one day. */ - if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) { + if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) { rc = -ENOMEDIUM; goto err_open; } - if (sc->readonly && (filp->f_mode & FMODE_WRITE)) { + if (lun->readonly && (filp->f_mode & FMODE_WRITE)) { rc = -EROFS; goto err_open; } @@ -1567,7 +1572,8 @@ err_open: static int ub_bd_release(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; + struct ub_dev *sc = lun->udev; ub_put(sc); return 0; @@ -1597,20 +1603,14 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp, */ static int ub_bd_revalidate(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; - - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - if (!atomic_read(&sc->poison)) { /* Cover sc->dev */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, - sc->capacity.nsec, sc->capacity.bsize); - } + struct ub_lun *lun = disk->private_data; + + ub_revalidate(lun->udev, lun); /* XXX Support sector size switching like in sr.c */ - blk_queue_hardsect_size(disk->queue, sc->capacity.bsize); - set_capacity(disk, sc->capacity.nsec); - // set_disk_ro(sdkp->disk, sc->readonly); + blk_queue_hardsect_size(disk->queue, lun->capacity.bsize); + set_capacity(disk, lun->capacity.nsec); + // set_disk_ro(sdkp->disk, lun->readonly); return 0; } @@ -1626,9 +1626,9 @@ static int ub_bd_revalidate(struct gendisk *disk) */ static int ub_bd_media_changed(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; - if (!sc->removable) + if (!lun->removable) return 0; /* @@ -1640,12 +1640,12 @@ static int ub_bd_media_changed(struct gendisk *disk) * will fail, then block layer discards the data. Since we never * spin drives up, such devices simply cannot be used with ub anyway. */ - if (ub_sync_tur(sc) != 0) { - sc->changed = 1; + if (ub_sync_tur(lun->udev, lun) != 0) { + lun->changed = 1; return 1; } - return sc->changed; + return lun->changed; } static struct block_device_operations ub_bd_fops = { @@ -1669,7 +1669,7 @@ static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * Test if the device has a check condition on it, synchronously. */ -static int ub_sync_tur(struct ub_dev *sc) +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun) { struct ub_scsi_cmd *cmd; enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) }; @@ -1688,6 +1688,7 @@ static int ub_sync_tur(struct ub_dev *sc) cmd->cdb_len = 6; cmd->dir = UB_DIR_NONE; cmd->state = UB_CMDST_INIT; + cmd->lun = lun; /* This may be NULL, but that's ok */ cmd->done = ub_probe_done; cmd->back = &compl; @@ -1718,7 +1719,8 @@ err_alloc: /* * Read the SCSI capacity synchronously (for probing). */ -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret) { struct ub_scsi_cmd *cmd; char *p; @@ -1743,6 +1745,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) cmd->state = UB_CMDST_INIT; cmd->data = p; cmd->len = 8; + cmd->lun = lun; cmd->done = ub_probe_done; cmd->back = &compl; @@ -1811,6 +1814,90 @@ static void ub_probe_timeout(unsigned long arg) complete(cop); } +/* + * Get number of LUNs by the way of Bulk GetMaxLUN command. + */ +static int ub_sync_getmaxlun(struct ub_dev *sc) +{ + int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; + unsigned char *p; + enum { ALLOC_SIZE = 1 }; + struct usb_ctrlrequest *cr; + struct completion compl; + struct timer_list timer; + int nluns; + int rc; + + init_completion(&compl); + + rc = -ENOMEM; + if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) + goto err_alloc; + *p = 55; + + cr = &sc->work_cr; + cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + cr->bRequest = US_BULK_GET_MAX_LUN; + cr->wValue = cpu_to_le16(0); + cr->wIndex = cpu_to_le16(ifnum); + cr->wLength = cpu_to_le16(1); + + usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe, + (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl); + sc->work_urb.transfer_flags = 0; + sc->work_urb.actual_length = 0; + sc->work_urb.error_count = 0; + sc->work_urb.status = 0; + + if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { + if (rc == -EPIPE) { + printk("%s: Stall at GetMaxLUN, using 1 LUN\n", + sc->name); /* P3 */ + } else { + printk(KERN_WARNING + "%s: Unable to submit GetMaxLUN (%d)\n", + sc->name, rc); + } + goto err_submit; + } + + init_timer(&timer); + timer.function = ub_probe_timeout; + timer.data = (unsigned long) &compl; + timer.expires = jiffies + UB_CTRL_TIMEOUT; + add_timer(&timer); + + wait_for_completion(&compl); + + del_timer_sync(&timer); + usb_kill_urb(&sc->work_urb); + + if (sc->work_urb.actual_length != 1) { + printk("%s: GetMaxLUN returned %d bytes\n", sc->name, + sc->work_urb.actual_length); /* P3 */ + nluns = 0; + } else { + if ((nluns = *p) == 55) { + nluns = 0; + } else { + /* GetMaxLUN returns the maximum LUN number */ + nluns += 1; + if (nluns > UB_MAX_LUNS) + nluns = UB_MAX_LUNS; + } + printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name, + *p, nluns); /* P3 */ + } + + kfree(p); + return nluns; + +err_submit: + kfree(p); +err_alloc: + return rc; +} + /* * Clear initial stalls. */ @@ -1897,8 +1984,8 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, } if (ep_in == NULL || ep_out == NULL) { - printk(KERN_NOTICE "%s: device %u failed endpoint check\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: failed endpoint check\n", + sc->name); return -EIO; } @@ -1921,8 +2008,7 @@ static int ub_probe(struct usb_interface *intf, const struct usb_device_id *dev_id) { struct ub_dev *sc; - request_queue_t *q; - struct gendisk *disk; + int nluns; int rc; int i; @@ -1931,6 +2017,7 @@ static int ub_probe(struct usb_interface *intf, goto err_core; memset(sc, 0, sizeof(struct ub_dev)); spin_lock_init(&sc->lock); + INIT_LIST_HEAD(&sc->luns); usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); @@ -1942,19 +2029,16 @@ static int ub_probe(struct usb_interface *intf, ub_init_completion(&sc->work_done); sc->work_done.done = 1; /* A little yuk, but oh well... */ - rc = -ENOSR; - if ((sc->id = ub_id_get()) == -1) - goto err_id; - snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a'); - sc->dev = interface_to_usbdev(intf); sc->intf = intf; // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - usb_set_intfdata(intf, sc); usb_get_dev(sc->dev); // usb_get_intf(sc->intf); /* Do we need this? */ + snprintf(sc->name, 12, DRV_NAME "(%d.%d)", + sc->dev->bus->busnum, sc->dev->devnum); + /* XXX Verify that we can handle the device (from descriptors) */ ub_get_pipes(sc, sc->dev, intf); @@ -1992,35 +2076,88 @@ static int ub_probe(struct usb_interface *intf, * In any case it's not our business how revaliadation is implemented. */ for (i = 0; i < 3; i++) { /* Retries for benh's key */ - if ((rc = ub_sync_tur(sc)) <= 0) break; + if ((rc = ub_sync_tur(sc, NULL)) <= 0) break; if (rc != 0x6) break; msleep(10); } - sc->removable = 1; /* XXX Query this from the device */ - sc->changed = 1; /* ub_revalidate clears only */ - sc->first_open = 1; + nluns = 1; + for (i = 0; i < 3; i++) { + if ((rc = ub_sync_getmaxlun(sc)) < 0) { + /* + * Some devices (i.e. Iomega Zip100) need this -- + * apparently the bulk pipes get STALLed when the + * GetMaxLUN request is processed. + * XXX I have a ZIP-100, verify it does this. + */ + if (rc == -EPIPE) { + ub_probe_clear_stall(sc, sc->recv_bulk_pipe); + ub_probe_clear_stall(sc, sc->send_bulk_pipe); + } + break; + } + if (rc != 0) { + nluns = rc; + break; + } + mdelay(100); + } - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize); + for (i = 0; i < nluns; i++) { + ub_probe_lun(sc, i); + } + return 0; + + /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ +err_diag: + usb_set_intfdata(intf, NULL); + // usb_put_intf(sc->intf); + usb_put_dev(sc->dev); + kfree(sc); +err_core: + return rc; +} + +static int ub_probe_lun(struct ub_dev *sc, int lnum) +{ + struct ub_lun *lun; + request_queue_t *q; + struct gendisk *disk; + int rc; + + rc = -ENOMEM; + if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL) + goto err_alloc; + memset(lun, 0, sizeof(struct ub_lun)); + lun->num = lnum; + + rc = -ENOSR; + if ((lun->id = ub_id_get()) == -1) + goto err_id; + + lun->udev = sc; + list_add(&lun->link, &sc->luns); + + snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)", + lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num); + + lun->removable = 1; /* XXX Query this from the device */ + lun->changed = 1; /* ub_revalidate clears only */ + lun->first_open = 1; + ub_revalidate(sc, lun); - /* - * Just one disk per sc currently, but maybe more. - */ rc = -ENOMEM; if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL) goto err_diskalloc; - sc->disk = disk; - sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a'); - sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a'); + lun->disk = disk; + sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); + sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a'); disk->major = UB_MAJOR; - disk->first_minor = sc->id * UB_MINORS_PER_MAJOR; + disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; disk->fops = &ub_bd_fops; - disk->private_data = sc; - disk->driverfs_dev = &intf->dev; + disk->private_data = lun; + disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */ rc = -ENOMEM; if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL) @@ -2028,28 +2165,17 @@ static int ub_probe(struct usb_interface *intf, disk->queue = q; - // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); + blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); blk_queue_max_hw_segments(q, UB_MAX_REQ_SG); blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); - // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); + blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ blk_queue_max_sectors(q, UB_MAX_SECTORS); - blk_queue_hardsect_size(q, sc->capacity.bsize); - - /* - * This is a serious infraction, caused by a deficiency in the - * USB sg interface (usb_sg_wait()). We plan to remove this once - * we get mileage on the driver and can justify a change to USB API. - * See blk_queue_bounce_limit() to understand this part. - * - * XXX And I still need to be aware of the DMA mask in the HC. - */ - q->bounce_pfn = blk_max_low_pfn; - q->bounce_gfp = GFP_NOIO; + blk_queue_hardsect_size(q, lun->capacity.bsize); - q->queuedata = sc; + q->queuedata = lun; - set_capacity(disk, sc->capacity.nsec); - if (sc->removable) + set_capacity(disk, lun->capacity.nsec); + if (lun->removable) disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); @@ -2059,22 +2185,20 @@ static int ub_probe(struct usb_interface *intf, err_blkqinit: put_disk(disk); err_diskalloc: - device_remove_file(&sc->intf->dev, &dev_attr_diag); -err_diag: - usb_set_intfdata(intf, NULL); - // usb_put_intf(sc->intf); - usb_put_dev(sc->dev); - ub_id_put(sc->id); + list_del(&lun->link); + ub_id_put(lun->id); err_id: - kfree(sc); -err_core: + kfree(lun); +err_alloc: return rc; } static void ub_disconnect(struct usb_interface *intf) { struct ub_dev *sc = usb_get_intfdata(intf); - struct gendisk *disk = sc->disk; + struct list_head *p; + struct ub_lun *lun; + struct gendisk *disk; unsigned long flags; /* @@ -2124,14 +2248,18 @@ static void ub_disconnect(struct usb_interface *intf) /* * Unregister the upper layer. */ - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - /* - * I wish I could do: - * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); - * As it is, we rely on our internal poisoning and let - * the upper levels to spin furiously failing all the I/O. - */ + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + disk = lun->disk; + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + /* + * I wish I could do: + * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); + * As it is, we rely on our internal poisoning and let + * the upper levels to spin furiously failing all the I/O. + */ + } /* * Taking a lock on a structure which is about to be freed @@ -2182,8 +2310,8 @@ static int __init ub_init(void) { int rc; - /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n", - sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev)); + /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n", + sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun)); if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0) goto err_regblkdev; -- cgit v1.2.3-70-g09d2 From d7771a33bf2b23fc6d0b9c133fb0c00670154f10 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 May 2005 18:49:59 +0200 Subject: [PATCH] USB: remove drivers/usb/media/pwc/ChangeLog This patch removes the outdated ChangeLog file for this driver. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/pwc/ChangeLog | 143 ---------------------------------------- 1 file changed, 143 deletions(-) delete mode 100644 drivers/usb/media/pwc/ChangeLog (limited to 'drivers') diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog deleted file mode 100644 index b2eb71a9afb..00000000000 --- a/drivers/usb/media/pwc/ChangeLog +++ /dev/null @@ -1,143 +0,0 @@ -9.0.2 - -* Adding #ifdef to compile PWC before and after 2.6.5 - -9.0.1 - -9.0 - - -8.12 - -* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere. - -8.11.1 - -* Fix for PCVC720/40, would not be able to set videomode -* Fix for Samsung MPC models, appearantly they are based on a newer chipset - -8.11 - -* 20 dev_hints (per request) -* Hot unplugging should be better, no more dangling pointers or memory leaks -* Added reserved Logitech webcam IDs -* Device now remembers size & fps between close()/open() -* Removed palette stuff altogether - -8.10.1 - -* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro - -8.10 - -* Fixed ID for QuickCam Notebook pro -* Added GREALSIZE ioctl() call -* Fixed bug in case PWCX was not loaded and invalid size was set - -8.9 - -* Merging with kernel 2.5.49 -* Adding IDs for QuickCam Zoom & QuickCam Notebook - -8.8 - -* Fixing 'leds' parameter -* Adding IDs for Logitech QuickCam Pro 4000 -* Making URB init/cleanup a little nicer - -8.7 - -* Incorporating changes in ioctl() parameter passing -* Also changes to URB mechanism - -8.6 - -* Added ID's for Visionite VCS UM100 and UC300 -* Removed YUV420-interlaced palette altogether (was confusing) -* Removed MIRROR stuff as it didn't work anyway -* Fixed a problem with the 'leds' parameter (wouldn't blink) -* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s, - CONTOUR, BACKLIGHT, FLICKER, DYNNOISE. -* VIDIOCGCAP.name now contains real camera model name instead of - 'Philips xxx webcam' -* Added PROBE ioctl (see previous point & API doc) - -8.5 - -* Adding IDs for Creative Labs Webcam 5 -* Adding IDs for SOTEC CMS-001 webcam -* Solving possible hang in VIDIOCSYNC when unplugging the cam -* Forgot to return structure in VIDIOCPWCGAWB, oops -* Time interval for the LEDs are now in milliseconds - -8.4 - -* Fixing power_save option for Vesta range -* Handling new error codes in ISOC callback -* Adding dev_hint module parameter, to specify /dev/videoX device nodes - -8.3 - -* Adding Samsung C10 and C30 cameras -* Removing palette module parameter -* Fixed typo in ID of QuickCam 3000 Pro -* Adding LED settings (blinking while in use) for ToUCam cameras. -* Turns LED off when camera is not in use. - -8.2 - -* Making module more silent when trace = 0 -* Adding QuickCam 3000 Pro IDs -* Chrominance control for the Vesta cameras -* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM -* Included Oliver Neukem's lock_kernel() patch -* Allocates less memory for image buffers -* Adds ioctl()s for the whitebalancing - -8.1 - -* Adding support for 750 -* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls - -8.0 -* 'damage control' after inclusion in 2.4.5. -* Changed wait-queue mechanism in read/mmap/poll according to the book. -* Included YUV420P palette. -* Changed interface to decompressor module. -* Cleaned up pwc structure a bit. - -7.0 - -* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned. -* There is now a clear error message when an image size is selected that - is only supported using the decompressor, and the decompressor isn't - loaded. -* When the decompressor wasn't loaded, selecting large image size - would create skewed or double images. - -6.3 - -* Introduced spinlocks for the buffer pointer manipulation; a number of - reports seem to suggest the down()/up() semaphores were the cause of - lockups, since they are not suitable for interrupt/user locking. -* Separated decompressor and core code into 2 modules. - -6.2 - -* Non-integral image sizes are now padded with gray or black. -* Added SHUTTERSPEED ioctl(). -* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error, - even though the call succeeded. -* Added hotplug support for 2.4.*. -* Memory: the 645/646 uses less memory now. - -6.1 - -* VIDIOCSPICT returns -EINVAL with invalid palettes. -* Added saturation control. -* Split decompressors from rest. -* Fixed bug that would reset the framerate to the default framerate if - the rate field was set to 0 (which is not what I intended, nl. do not - change the framerate!). -* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately. -* Workaround for a bug in the 730 sensor. -- cgit v1.2.3-70-g09d2 From 5ce0482e18193a15223911515ee44373cffb35b8 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 5 May 2005 15:12:57 -0700 Subject: [PATCH] USB: add new wacom device to usb hid-core list - add Intuos3 and Cintiq 21UX Signed-off-by: Ping Cheng Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 869ff73690a..d972cb4cb19 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1315,6 +1315,8 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_INTUOS2 0x0040 #define USB_DEVICE_ID_WACOM_VOLITO 0x0060 #define USB_DEVICE_ID_WACOM_PTU 0x0003 +#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 +#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 @@ -1481,6 +1483,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, -- cgit v1.2.3-70-g09d2 From dc1d1003e8309ef8e5153ce0c00cce76144abbdb Mon Sep 17 00:00:00 2001 From: Lonnie Mendez Date: Tue, 10 May 2005 00:17:17 -0500 Subject: [PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table This patch adds the DeLorme Earthmate lt-20 productid to the hid blacklist table. This patch ensures the lt-20 can be claimed by the appropriate driver (cypress_m8). Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid blacklist table. Signed-off-by: Lonnie Mendez Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index d972cb4cb19..b6e061af3e3 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1403,6 +1403,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 +#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 @@ -1439,6 +1440,7 @@ static struct hid_blacklist { { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, -- cgit v1.2.3-70-g09d2 From 4871d3be13ea2b33edc9ba6fbcc30fc047087be7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 2 Jun 2005 22:18:12 -0700 Subject: [PATCH] USB: add Vernier devices to HID blacklist They aren't really HID devices. Damm microsoft HID driver, that thing has caused more companies to have to do this kind of hack... Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index b6e061af3e3..2d8bd9dcc6e 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1415,6 +1415,12 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_BTC 0x046e #define USB_DEVICE_ID_BTC_KEYBOARD 0x5303 +#define USB_VENDOR_ID_VERNIER 0x08f7 +#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 +#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 +#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 +#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 + /* * Alphabetically sorted blacklist by quirk type. @@ -1460,6 +1466,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE }, -- cgit v1.2.3-70-g09d2 From 58cfe9113e485f7e04bd0eac4fc4251b330af501 Mon Sep 17 00:00:00 2001 From: Matthias Urlichs Date: Mon, 23 May 2005 17:00:48 -0700 Subject: [PATCH] USB: add Option Card driver This patch adds a new driver for "Option" cards. This is a GSM data card, controlled by three "serial ports" which are connected via an OHCI adapter, all located on an oversized PC-Card. It's sold by several GSM service providers. Traditionally, this card has been accessed via the standard serial driver and appropriate vendor= and product= options. However, testing has revealed several problems with this approach, including hung data transfers and lost data blocks when receiving. Therefore, I've written a separate driver. Signed-off-by: Matthias Urlichs Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 11 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/option.c | 729 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 741 insertions(+) create mode 100644 drivers/usb/serial/option.c (limited to 'drivers') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index bc798edf035..9438909e87a 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM To compile this driver as a module, choose M here: the module will be called keyspan_pda. +config USB_SERIAL_OPTION + tristate "USB Option PCMCIA serial driver" + depends on USB_SERIAL && USB_OHCI_HCD && PCCARD + help + Say Y here if you want to use an Option card. This is a + GSM card, controlled by three serial ports which are connected + via an OHCI adapter located on a PC card. + + To compile this driver as a module, choose M here: the + module will be called option. + config USB_SERIAL_OMNINET tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index d56ff6d86cc..6c7cdcc99a9 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o +obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c new file mode 100644 index 00000000000..b722175f108 --- /dev/null +++ b/drivers/usb/serial/option.c @@ -0,0 +1,729 @@ +/* + Option Card (PCMCIA to) USB to Serial Driver + + Copyright (C) 2005 Matthias Urlichs + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings + + History: + + 2005-05-19 v0.1 Initial version, based on incomplete docs + and analysis of misbehavior of the standard driver + 2005-05-20 v0.2 Extended the input buffer to avoid losing + random 64-byte chunks of data + 2005-05-21 v0.3 implemented chars_in_buffer() + turned on low_latency + simplified the code somewhat +*/ +#define DRIVER_VERSION "v0.3" +#define DRIVER_AUTHOR "Matthias Urlichs " +#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver" + +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" + +/* Function prototypes */ +static int option_open (struct usb_serial_port *port, struct file *filp); +static void option_close (struct usb_serial_port *port, struct file *filp); +static int option_startup (struct usb_serial *serial); +static void option_shutdown (struct usb_serial *serial); +static void option_rx_throttle (struct usb_serial_port *port); +static void option_rx_unthrottle (struct usb_serial_port *port); +static int option_write_room (struct usb_serial_port *port); + +static void option_instat_callback(struct urb *urb, struct pt_regs *regs); + + +static int option_write (struct usb_serial_port *port, + const unsigned char *buf, int count); + +static int option_chars_in_buffer (struct usb_serial_port *port); +static int option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg); +static void option_set_termios (struct usb_serial_port *port, + struct termios *old); +static void option_break_ctl (struct usb_serial_port *port, int break_state); +static int option_tiocmget (struct usb_serial_port *port, struct file *file); +static int option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear); +static int option_send_setup (struct usb_serial_port *port); + +/* Vendor and product IDs */ +#define OPTION_VENDOR_ID 0x0AF0 + +#define OPTION_PRODUCT_OLD 0x5000 +#define OPTION_PRODUCT_WLAN 0x6000 + +static struct usb_device_id option_ids[] = { + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, option_ids); + +static struct usb_driver option_driver = { + .owner = THIS_MODULE, + .name = "option", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = option_ids, +}; + +/* The card has three separate interfaces, wich the serial driver + * recognizes separately, thus num_port=1. + */ +static struct usb_serial_device_type option_3port_device = { + .owner = THIS_MODULE, + .name = "Option 3-port card", + .short_name = "option", + .id_table = option_ids, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, /* 3 */ + .open = option_open, + .close = option_close, + .write = option_write, + .write_room = option_write_room, + .chars_in_buffer = option_chars_in_buffer, + .throttle = option_rx_throttle, + .unthrottle = option_rx_unthrottle, + .ioctl = option_ioctl, + .set_termios = option_set_termios, + .break_ctl = option_break_ctl, + .tiocmget = option_tiocmget, + .tiocmset = option_tiocmset, + .attach = option_startup, + .shutdown = option_shutdown, + .read_int_callback = option_instat_callback, +}; + +static int debug; + +/* per port private data */ + +#define N_IN_URB 4 +#define N_OUT_URB 1 +#define IN_BUFLEN 1024 +#define OUT_BUFLEN 1024 + +struct option_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + char in_buffer[N_IN_URB][IN_BUFLEN]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + char out_buffer[N_OUT_URB][OUT_BUFLEN]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + // int break_on; + + unsigned long tx_start_time[N_OUT_URB]; +}; + + +/* Functions used by new usb-serial code. */ +static int __init +option_init (void) +{ + int retval; + retval = usb_serial_register(&option_3port_device); + if (retval) + goto failed_3port_device_register; + retval = usb_register(&option_driver); + if (retval) + goto failed_driver_register; + + info(DRIVER_DESC ": " DRIVER_VERSION); + + return 0; + +failed_driver_register: + usb_serial_deregister (&option_3port_device); +failed_3port_device_register: + return retval; +} + +static void __exit +option_exit (void) +{ + usb_deregister (&option_driver); + usb_serial_deregister (&option_3port_device); +} + +module_init(option_init); +module_exit(option_exit); + +static void +option_rx_throttle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_rx_unthrottle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_break_ctl (struct usb_serial_port *port, int break_state) +{ + /* Unfortunately, I don't know how to send a break */ + dbg("%s", __FUNCTION__); +} + + +static void +option_set_termios (struct usb_serial_port *port, + struct termios *old_termios) +{ + dbg("%s", __FUNCTION__); + + option_send_setup(port); +} + +static int +option_tiocmget(struct usb_serial_port *port, struct file *file) +{ + unsigned int value; + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int +option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return option_send_setup(port); +} + +static int +option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +/* Write */ +static int +option_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct option_port_private *portdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + + portdata = usb_get_serial_port_data(port); + + dbg("%s: write (%d chars)", __FUNCTION__, count); + +#if 0 + spin_lock(&port->lock); + if (port->write_urb_busy) { + spin_unlock(&port->lock); + dbg("%s: already writing", __FUNCTION__); + return 0; + } + port->write_urb_busy = 1; + spin_unlock(&port->lock); +#endif + + i = 0; + left = count; + while (left>0) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + for (;i < N_OUT_URB; i++) { + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = portdata->out_urbs[i]; + if (this_urb->status != -EINPROGRESS) + break; + if (this_urb->transfer_flags & URB_ASYNC_UNLINK) + continue; + if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ)) + continue; + this_urb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(this_urb); + } + + if (i == N_OUT_URB) { + /* no bulk out free! */ + dbg("%s: no output urb -- left %d", __FUNCTION__,count-left); +#if 0 + port->write_urb_busy = 0; +#endif + return count-left; + } + + dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i); + + memcpy (this_urb->transfer_buffer, buf, todo); + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo; + + this_urb->transfer_flags &= ~URB_ASYNC_UNLINK; + this_urb->dev = port->serial->dev; + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status); + continue; + } + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; +#if 0 + port->write_urb_busy = 0; +#endif + dbg("%s: wrote (did %d)", __FUNCTION__, count); + return count; +} + +static void +option_indat_callback (struct urb *urb, struct pt_regs *regs) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + + dbg("%s: %p", __FUNCTION__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); + port = (struct usb_serial_port *) urb->context; + + if (urb->status) { + dbg("%s: nonzero status: %d on endpoint %02x.", + __FUNCTION__, urb->status, endpoint); + } else { + tty = port->tty; + if (urb->actual_length) { + for (i = 0; i < urb->actual_length ; ++i) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + tty_insert_flip_char(tty, data[i], 0); + } + tty_flip_buffer_push(tty); + } else { + dbg("%s: empty read urb received", __FUNCTION__); + } + + /* Resubmit urb so we continue receiving */ + if (port->open_count && urb->status != -ESHUTDOWN) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err); + } + } + return; +} + +static void +option_outdat_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port; + + dbg("%s", __FUNCTION__); + + port = (struct usb_serial_port *) urb->context; + + if (port->open_count) + schedule_work(&port->work); +} + +static void +option_instat_callback (struct urb *urb, struct pt_regs *regs) +{ + int err; + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dbg("%s", __FUNCTION__); + dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + + if (urb->status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dbg("%s: NULL req_pkt\n", __FUNCTION__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); + + dbg("%s: signal x%x", __FUNCTION__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (port->tty && !C_CLOCAL(port->tty) + && old_dcd_state && !portdata->dcd_state) { + tty_hangup(port->tty); + } + } else + dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest); + } else + dbg("%s: error %d", __FUNCTION__, urb->status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (urb->status != -ESHUTDOWN) { + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err); + } +} + + +static int +option_write_room (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status != -EINPROGRESS) + data_len += OUT_BUFLEN; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_chars_in_buffer (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status == -EINPROGRESS) + data_len += this_urb->transfer_buffer_length; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_open (struct usb_serial_port *port, struct file *filp) +{ + struct option_port_private *portdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (! urb) + continue; + if (urb->dev != serial->dev) { + dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev); + continue; + } + + /* make sure endpoint data toggle is synchronized with the device */ + + usb_clear_halt(urb->dev, urb->pipe); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err, + urb->transfer_buffer_length); + } + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < N_OUT_URB; i++) { + urb = portdata->out_urbs[i]; + if (! urb) + continue; + urb->dev = serial->dev; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ + } + + port->tty->low_latency = 1; + + option_send_setup(port); + + return (0); +} + +static inline void +stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) { + urb->transfer_flags &= ~URB_ASYNC_UNLINK; + usb_kill_urb(urb); + } +} + +static void +option_close(struct usb_serial_port *port, struct file *filp) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + + if (serial->dev) { + option_send_setup(port); + + /* Stop reading/writing urbs */ + for (i = 0; i < N_IN_URB; i++) + stop_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + stop_urb(portdata->out_urbs[i]); + } + port->tty = NULL; +} + + +/* Helper functions used by option_setup_urbs */ +static struct urb * +option_setup_urb (struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *, struct pt_regs *regs)) +{ + struct urb *urb; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (urb == NULL) { + dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + return NULL; + } + + /* Fill URB using supplied data. */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +/* Setup urbs */ +static void +option_setup_urbs(struct usb_serial *serial) +{ + int j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + port = serial->port[0]; + portdata = usb_get_serial_port_data(port); + + /* Do indat endpoints first */ + for (j = 0; j <= N_IN_URB; ++j) { + portdata->in_urbs[j] = option_setup_urb (serial, + port->bulk_in_endpointAddress, USB_DIR_IN, port, + portdata->in_buffer[j], IN_BUFLEN, option_indat_callback); + } + + /* outdat endpoints */ + for (j = 0; j <= N_OUT_URB; ++j) { + portdata->out_urbs[j] = option_setup_urb (serial, + port->bulk_out_endpointAddress, USB_DIR_OUT, port, + portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback); + } +} + + +static int +option_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + portdata = usb_get_serial_port_data(port); + + if (port->tty) { + int val = 0; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT); + } + + return 0; +} + + +static int +option_startup (struct usb_serial *serial) +{ + int i, err; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL); + if (!portdata) { + dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i); + return (1); + } + memset(portdata, 0, sizeof(struct option_port_private)); + + usb_set_serial_port_data(port, portdata); + + if (! port->interrupt_in_urb) + continue; + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) + dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err); + } + + option_setup_urbs(serial); + + return (0); +} + +static void +option_shutdown (struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + stop_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + stop_urb(portdata->out_urbs[j]); + } + + /* Now free them */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + for (j = 0; j < N_IN_URB; j++) { + if (portdata->in_urbs[j]) { + usb_free_urb(portdata->in_urbs[j]); + portdata->in_urbs[j] = NULL; + } + } + for (j = 0; j < N_OUT_URB; j++) { + if (portdata->out_urbs[j]) { + usb_free_urb(portdata->out_urbs[j]); + portdata->out_urbs[j] = NULL; + } + } + } + + /* Now free per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + } +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages"); + -- cgit v1.2.3-70-g09d2 From 77ddecc3c047e4e9bd7332d3173def93ea2de1ad Mon Sep 17 00:00:00 2001 From: Paulo Marques Date: Wed, 18 May 2005 13:12:49 +0100 Subject: [PATCH] USB: make MODALIAS code a bit smaller devices This patch makes the code to provide modalias in sysfs for usb devices 56 bytes smaller in i386, while making it clear that the first part of the modalias string is the same no matter what the device class is. Signed-Off-By: Paulo Marques Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4ab50009291..4d0c9e65cd0 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -290,32 +290,30 @@ static ssize_t show_modalias(struct device *dev, char *buf) { struct usb_interface *intf; struct usb_device *udev; + int len; intf = to_usb_interface(dev); udev = interface_to_usbdev(intf); - if (udev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; - return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n", + len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), le16_to_cpu(udev->descriptor.bcdDevice), udev->descriptor.bDeviceClass, udev->descriptor.bDeviceSubClass, - udev->descriptor.bDeviceProtocol, + udev->descriptor.bDeviceProtocol); + buf += len; + + if (udev->descriptor.bDeviceClass == 0) { + struct usb_host_interface *alt = intf->cur_altsetting; + + return len + sprintf(buf, "%02Xisc%02Xip%02X\n", alt->desc.bInterfaceClass, alt->desc.bInterfaceSubClass, alt->desc.bInterfaceProtocol); } else { - return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - le16_to_cpu(udev->descriptor.bcdDevice), - udev->descriptor.bDeviceClass, - udev->descriptor.bDeviceSubClass, - udev->descriptor.bDeviceProtocol); + return len + sprintf(buf, "*isc*ip*\n"); } - } static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); -- cgit v1.2.3-70-g09d2 From 1724757e5ab5219b46876ac6e4e362a4b2dcfa86 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sat, 21 May 2005 00:45:55 -0700 Subject: [PATCH] USB Storage: Add unusual_devs for Trumpion Voice Recorder The original entry of this patch was submitted by Filippo Bardelli , with cleanups and patch-ification by me. This corrects the subclass that the device reports. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d2891f47579..9fcc7bd1fbe 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -862,6 +862,15 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), +/* Reported by Filippo Bardelli + * The device reports a subclass of RBC, which is wrong. + */ +UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, + "Trumpion Microelectronics, Inc.", + "33520 USB Digital Voice Recorder", + US_SC_UFI, US_PR_DEVICE, NULL, + 0), + /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", -- cgit v1.2.3-70-g09d2 From 39a66b8d22a36cfa1a48f7f59c6a4639d9c99653 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Fri, 27 May 2005 00:09:56 +0100 Subject: [PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 363 +++++++++++++++++++++++++++++++++----------- 1 file changed, 275 insertions(+), 88 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 7e9bb63eb46..4ace9964fc6 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -7,6 +7,14 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + * Outstanding Issues: + * Buffers are not flushed when the port is opened. + * Multiple calls to write() may fail with "Resource temporarily unavailable" + * */ #include @@ -24,7 +32,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.03" +#define DRIVER_VERSION "v0.04" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*); static void cp2101_close(struct usb_serial_port*, struct file*); static void cp2101_get_termios(struct usb_serial_port*); static void cp2101_set_termios(struct usb_serial_port*, struct termios*); +static int cp2101_tiocmget (struct usb_serial_port *, struct file *); +static int cp2101_tiocmset (struct usb_serial_port *, struct file *, + unsigned int, unsigned int); static void cp2101_break_ctl(struct usb_serial_port*, int); static int cp2101_startup (struct usb_serial *); static void cp2101_shutdown(struct usb_serial*); @@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*); static int debug; static struct usb_device_id id_table [] = { - {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/ - {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/ - { } /* Terminating Entry*/ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE (usb, id_table); @@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = { .close = cp2101_close, .break_ctl = cp2101_break_ctl, .set_termios = cp2101_set_termios, + .tiocmget = cp2101_tiocmget, + .tiocmset = cp2101_tiocmset, .attach = cp2101_startup, .shutdown = cp2101_shutdown, }; -/*Config request types*/ +/* Config request types */ #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/*Config SET requests. To GET, add 1 to the request number*/ -#define CP2101_UART 0x00 /*Enable / Disable*/ -#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/ -#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/ -#define CP2101_BREAK 0x05 /*On / Off*/ -#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/ -#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/ -#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/ +/* Config SET requests. To GET, add 1 to the request number */ +#define CP2101_UART 0x00 /* Enable / Disable */ +#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ +#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ +#define CP2101_BREAK 0x05 /* On / Off */ +#define CP2101_CONTROL 0x07 /* Flow control line states */ +#define CP2101_MODEMCTL 0x13 /* Modem controls */ +#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ -/*CP2101_UART*/ +/* CP2101_UART */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/*CP2101_BAUDRATE*/ +/* CP2101_BAUDRATE */ #define BAUD_RATE_GEN_FREQ 0x384000 -/*CP2101_BITS*/ +/* CP2101_BITS */ #define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 #define BITS_DATA_7 0X0700 #define BITS_DATA_8 0X0800 @@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = { #define BITS_STOP_1 0x0000 #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 + +/* CP2101_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 +/* CP2101_CONTROL */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 -static int cp2101_get_config(struct usb_serial_port* port, u8 request) +/* + * cp2101_get_config + * Reads from the CP2101 configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp2101_get_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - unsigned char buf[4]; - unsigned int value; - int result, i; + u32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc (length * sizeof(u32), GFP_KERNEL); + memset(buf, 0, length * sizeof(u32)); + + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + return -ENOMEM; + } - /*For get requests, the request number must be incremented*/ + /* For get requests, the request number must be incremented */ request++; - /*Issue the request, attempting to read 4 bytes*/ + /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, - 0, buf, 4, 300); + 0, buf, size, 300); - if (result < 0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x result=%d\n", - __FUNCTION__, request, result); - return result; - } + /* Convert data into an array of integers */ + for (i=0; idev, "%s - Unable to send config request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } - return value; + return 0; } -static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value) +/* + * cp2101_set_config + * Writes to the CP2101 configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp2101_set_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - int result; - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, value, - 0, NULL, 0, 300); + u32 *buf; + int result, i, length; - if (result <0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x value=0x%x result=%d\n", - __FUNCTION__, request, value, result); - return result; + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc(length * sizeof(u32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, 0x0000, + 0, buf, size, 300); + } else { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); } - dbg(" %s - request=0x%x value=0x%x result=%d", - __FUNCTION__, request, value, result); + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dev_err(&port->dev, "%s - Unable to send request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } + /* Single data value */ + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); return 0; } +/* + * cp2101_set_config_single + * Convenience function for calling cp2101_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp2101_set_config_single(struct usb_serial_port* port, + u8 request, unsigned int data) +{ + return cp2101_set_config(port, request, &data, 2); +} + static int cp2101_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); - if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __FUNCTION__); return -EPROTO; @@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) return result; } - /*Configure the termios structure*/ + /* Configure the termios structure */ cp2101_get_termios(port); + /* Set the DTR and RTS pins low */ + cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0); + return 0; } @@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - cp2101_set_config(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); } -/* cp2101_get_termios*/ -/* Reads the baud rate, data bits, parity and stop bits from the device*/ -/* Corrects any unsupported values*/ -/* Configures the termios structure to reflect the state of the device*/ +/* + * cp2101_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ static void cp2101_get_termios (struct usb_serial_port *port) { - unsigned int cflag; + unsigned int cflag, modem_ctl[4]; int baud; int bits; @@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port) } cflag = port->tty->termios->c_cflag; - baud = cp2101_get_config(port, CP2101_BAUDRATE); - /*Convert to baudrate*/ + cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + /* Convert to baudrate */ if (baud) baud = BAUD_RATE_GEN_FREQ / baud; dbg("%s - baud rate = %d", __FUNCTION__, baud); cflag &= ~CBAUD; switch (baud) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Baud rate is not supported, " "using 9600 baud", __FUNCTION__); cflag |= B9600; - cp2101_set_config(port, CP2101_BAUDRATE, + cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ/9600)); break; } - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __FUNCTION__); + cflag |= CS5; + break; case BITS_DATA_6: dbg("%s - data bits = 6", __FUNCTION__); cflag |= CS6; @@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown number of data bits, " @@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " "disabling parity", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit)", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __FUNCTION__); @@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Unknown number of stop bits, " "using 1 stop bit", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + cflag |= CRTSCTS; + } else { + dbg("%s - flow control = NONE", __FUNCTION__); + cflag &= ~CRTSCTS; + } + port->tty->termios->c_cflag = cflag; } @@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag, old_cflag=0; - int baud=0; - int bits; + int baud=0, bits; + unsigned int modem_ctl[4]; dbg("%s - port %d", __FUNCTION__, port->number); @@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } cflag = port->tty->termios->c_cflag; - /* check that they really want us to change something */ + /* Check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) @@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, /* If the baud rate is to be updated*/ if ((cflag & CBAUD) != (old_cflag & CBAUD)) { switch (cflag & CBAUD) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (baud) { dbg("%s - Setting baud rate to %d baud", __FUNCTION__, baud); - if (cp2101_set_config(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) dev_err(&port->dev, "Baud rate requested not " "supported by device\n"); } } - /*If the number of data bits is to be updated*/ + /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __FUNCTION__); + break; case CS6: bits |= BITS_DATA_6; dbg("%s - data bits = 6", __FUNCTION__); @@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - parity = EVEN", __FUNCTION__); } } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __FUNCTION__); } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " "not supported by device\n"); } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dbg("%s - flow control = NONE", __FUNCTION__); + } + + dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + } + +} + +static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + int control = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dbg("%s - control = 0x%.4x", __FUNCTION__, control); + + return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + +} + +static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) +{ + int control, result; + + dbg("%s - port %d", __FUNCTION__, port->number); + + cp2101_get_config(port, CP2101_CONTROL, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dbg("%s - control = 0x%.2x", __FUNCTION__, control); + + return result; } static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { - u16 state; + int state; dbg("%s - port %d", __FUNCTION__, port->number); if (break_state == 0) @@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, state); + cp2101_set_config(port, CP2101_BREAK, &state, 2); } static int cp2101_startup (struct usb_serial *serial) { - /*CP2101 buffers behave strangely unless device is reset*/ + /* CP2101 buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } @@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial) dbg("%s", __FUNCTION__); - /* stop reads and writes on all ports */ + /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { cp2101_cleanup(serial->port[i]); } @@ -560,16 +747,16 @@ static int __init cp2101_init (void) retval = usb_serial_register(&cp2101_device); if (retval) - return retval; /*Failed to register*/ + return retval; /* Failed to register */ retval = usb_register(&cp2101_driver); if (retval) { - /*Failed to register*/ + /* Failed to register */ usb_serial_deregister(&cp2101_device); return retval; } - /*Success*/ + /* Success */ info(DRIVER_DESC " " DRIVER_VERSION); return 0; } -- cgit v1.2.3-70-g09d2 From 18e144d32cd3dae6953c385e4b376ef9688b61b0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 27 May 2005 15:04:47 -0700 Subject: [SCSI] qla2xxx: fix bad locking during eh_abort Correct incorrect locking order in qla2xxx_eh_abort() handler which would case a hang during certain code-paths. With extra pieces to fix the irq state in the locks. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 579448222d6..3c97aa45772 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) int ret, i; unsigned int id, lun; unsigned long serial; + unsigned long flags; if (!CMD_SP(cmd)) return FAILED; @@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) /* Check active list for command command. */ spin_unlock_irq(ha->host->host_lock); - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; @@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) sp->state)); DEBUG3(qla2x00_print_scsi_cmd(cmd);) - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla2x00_abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); @@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "mbx success.\n", __func__, ha->host_no)); ret = SUCCESS; } - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); break; } + spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for the command to be returned. */ if (ret == SUCCESS) { - spin_unlock(&ha->hardware_lock); if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } - spin_lock(&ha->hardware_lock); } spin_lock_irq(ha->host->host_lock); @@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 0; @@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (cmd->device->id == t) { if (!qla2x00_eh_wait_on_command(ha, cmd)) { status = 1; @@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) } } } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); @@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 1; @@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); status = qla2x00_eh_wait_on_command(ha, cmd); if (status == 0) break; } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); -- cgit v1.2.3-70-g09d2 From c92715b3c22e94105a8fd9e4a23047d05c5077e7 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Thu, 2 Jun 2005 17:15:09 -0500 Subject: [SCSI] fix slab corruption during ipr probe With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on pSeries machines with IPR adapters with any 2.6.12-rc kernel. The change which seems to have introduced the problem is "SCSI: revamp target scanning routines" and may be found at: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2 In order to revert that in a 2.6.12-rc1 tree, I had to revert "target code updates to support scanned targets" first: http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2 With both patches reverted, the corruption messages go away. ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21, 2005) ipr 0001:d0:01.0: Found IOA with IRQ: 167 ipr 0001:d0:01.0: Starting IOA initialization sequence. ipr 0001:d0:01.0: Adapter firmware version: 020A005C ipr 0001:d0:01.0: IOA initialized. scsi0 : IBM 570B Storage Adapter Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM H0 Model: HUS103036FL3800 Rev: RPQF Type: Direct-Access ANSI SCSI revision: 04 Vendor: IBM Model: VSBPD4E1 U4SCSI Rev: 4770 Type: Enclosure ANSI SCSI revision: 02 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 Slab corruption: start=c0000001e8de5268, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [](.scsi_target_dev_release+0x28/0x50) 080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a Prev obj: start=c0000001e8de5050, len=512 Redzone: 0x5a2cf071/0x5a2cf071. Last user: [<0000000000000000>](0x0) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Next obj: start=c0000001e8de5480, len=512 Redzone: 0x170fc2a5/0x170fc2a5. Last user: [](.as_init_queue+0x5c/0x228) 000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00 010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98 ... I did some digging and the problem seems to be a refcounting issue in __scsi_add_device. The target gets freed in scsi_target_reap, and then __scsi_add_device tries to do another device_put on it. Signed-off-by: Nathan Lynch Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index cca772624ae..8d0d302844a 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (!starget) return ERR_PTR(-ENOMEM); + get_device(&starget->dev); down(&shost->scan_mutex); res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); if (res != SCSI_SCAN_LUN_PRESENT) -- cgit v1.2.3-70-g09d2 From f4d340cf869b2b63e1043eed72aa2eab6fa2cb2c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 3 Jun 2005 08:01:35 -0700 Subject: [PATCH] USB: resolve Zaurus problem This "obvious" one-liner is needed to recognize Zaurus SL 6000; it just checks two GUIDs not just one. OSDL bugids #4512 and #4545 seem to be duplicates of this report. From: Gerald Skerbitz Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/usb/net/usbnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 85476e76b24..4cbb408af72 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) } /* expect bcdVersion 1.0, ignore */ if (memcmp(&desc->bGUID, blan_guid, 16) - && memcmp(&desc->bGUID, blan_guid, 16) ) { + && memcmp(&desc->bGUID, safe_guid, 16) ) { /* hey, this one might _really_ be MDLM! */ dev_dbg (&intf->dev, "MDLM guid\n"); goto bad_desc; -- cgit v1.2.3-70-g09d2 From eae936e21bd726f9d9555f2262d439fbcd61dccf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sat, 4 Jun 2005 15:43:34 -0700 Subject: [PATCH] serial: update NEC VR4100 series serial support - Changed the return value of unknown type to NULL. - Deleted the NULL check of dev_id in siu_interrupt(). - Deleted the NULL check of port->membase in siu_shutdown(). - Added the NULL check of port->membase to siu_startup(). - Removed early_uart_ops. Now using vr41xx_siu standerd one. - Changed KSEG1ADDR() in siu_console_setup() to ioremap(). - When uart_add_one_port() failed, changed to set NULL to port->dev. Signed-off-by: Yoichi Yuasa Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/vr41xx_siu.c | 66 +++++++-------------------------------------- 1 file changed, 9 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 5d2ceb623e6..1f985327b0d 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port) return "DSIU"; } - return "unknown"; + return NULL; } static unsigned int siu_tx_empty(struct uart_port *port) @@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs) struct uart_port *port; uint8_t iir, lsr; - if (dev_id == NULL) - return IRQ_NONE; - port = (struct uart_port *)dev_id; iir = siu_read(port, UART_IIR); @@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port) { int retval; + if (port->membase == NULL) + return -ENODEV; + siu_clear_fifo(port); (void)siu_read(port, UART_LSR); @@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port) unsigned long flags; uint8_t lcr; - if (port->membase == NULL) - return; - siu_write(port, UART_IER, 0); spin_lock_irqsave(&port->lock, flags); @@ -802,53 +799,6 @@ static int siu_init_ports(void) #ifdef CONFIG_SERIAL_VR41XX_CONSOLE -static void early_set_termios(struct uart_port *port, struct termios *new, - struct termios *old) -{ - tcflag_t c_cflag; - uint8_t lcr; - unsigned int baud, quot; - - c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } - - if (c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - if (c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - if ((c_cflag & PARODD) != PARODD) - lcr |= UART_LCR_EPAR; - if (c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); - - siu_write(port, UART_DLL, (uint8_t)quot); - siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); - - siu_write(port, UART_LCR, lcr); -} - -static struct uart_ops early_uart_ops = { - .set_termios = early_set_termios, -}; - #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) static void wait_for_xmitr(struct uart_port *port) @@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options) if (port->membase == NULL) { if (port->mapbase == 0) return -ENODEV; - port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase); + port->membase = ioremap(port->mapbase, siu_port_size(port)); } vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); @@ -949,7 +899,7 @@ static int __devinit siu_console_init(void) for (i = 0; i < num; i++) { port = &siu_uart_ports[i]; - port->ops = &early_uart_ops; + port->ops = &siu_uart_ops; } register_console(&siu_console); @@ -994,8 +944,10 @@ static int siu_probe(struct device *dev) port->dev = dev; retval = uart_add_one_port(&siu_uart_driver, port); - if (retval) + if (retval < 0) { + port->dev = NULL; break; + } } if (i == 0 && retval < 0) { -- cgit v1.2.3-70-g09d2 From 3399ba5b70eccc918ea4ab2630cac68f5c8ff845 Mon Sep 17 00:00:00 2001 From: Denis Vlasenko Date: Mon, 6 Jun 2005 13:35:55 -0700 Subject: [PATCH] moxa: do not ignore input Stop using tty internal structure in mxser_receive_chars(), use tty_insert_flip_char(tty, ch flag); instead. Without this change driver ignores any rx'ed chars. Run tested. Cc: Alan Cox Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 38 +++++++++++++------------------------- 1 file changed, 13 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 7a245068e3e..f022f094443 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1995,9 +1995,6 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) unsigned char ch, gdl; int ignored = 0; int cnt = 0; - unsigned char *cp; - char *fp; - int count; int recv_room; int max = 256; unsigned long flags; @@ -2011,10 +2008,6 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) //return; } - cp = tty->flip.char_buf; - fp = tty->flip.flag_buf; - count = 0; - // following add by Victor Yu. 09-02-2002 if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) { @@ -2041,12 +2034,10 @@ static void mxser_receive_chars(struct mxser_struct *info, int *status) } while (gdl--) { ch = inb(info->base + UART_RX); - count++; - *cp++ = ch; - *fp++ = 0; + tty_insert_flip_char(tty, ch, 0); cnt++; /* - if((count>=HI_WATER) && (info->stop_rx==0)){ + if((cnt>=HI_WATER) && (info->stop_rx==0)){ mxser_stoprx(tty); info->stop_rx=1; break; @@ -2061,7 +2052,7 @@ intr_old: if (max-- < 0) break; /* - if((count>=HI_WATER) && (info->stop_rx==0)){ + if((cnt>=HI_WATER) && (info->stop_rx==0)){ mxser_stoprx(tty); info->stop_rx=1; break; @@ -2078,36 +2069,33 @@ intr_old: if (++ignored > 100) break; } else { - count++; + char flag = 0; if (*status & UART_LSR_SPECIAL) { if (*status & UART_LSR_BI) { - *fp++ = TTY_BREAK; + flag = TTY_BREAK; /* added by casper 1/11/2000 */ info->icount.brk++; - /* */ if (info->flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { - *fp++ = TTY_PARITY; + flag = TTY_PARITY; /* added by casper 1/11/2000 */ info->icount.parity++; /* */ } else if (*status & UART_LSR_FE) { - *fp++ = TTY_FRAME; + flag = TTY_FRAME; /* added by casper 1/11/2000 */ info->icount.frame++; /* */ } else if (*status & UART_LSR_OE) { - *fp++ = TTY_OVERRUN; + flag = TTY_OVERRUN; /* added by casper 1/11/2000 */ info->icount.overrun++; /* */ - } else - *fp++ = 0; - } else - *fp++ = 0; - *cp++ = ch; + } + } + tty_insert_flip_char(tty, ch, flag); cnt++; if (cnt >= recv_room) { if (!info->ldisc_stop_rx) { @@ -2132,13 +2120,13 @@ intr_old: // above add by Victor Yu. 09-02-2002 } while (*status & UART_LSR_DR); - end_intr: // add by Victor Yu. 09-02-2002 +end_intr: // add by Victor Yu. 09-02-2002 mxvar_log.rxcnt[info->port] += cnt; info->mon_data.rxcnt += cnt; info->mon_data.up_rxcnt += cnt; spin_unlock_irqrestore(&info->slock, flags); - + tty_flip_buffer_push(tty); } -- cgit v1.2.3-70-g09d2 From 9beb1d587f690d5b2f9087f8f10c0ff9f6b66886 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 6 Jun 2005 15:14:35 -0700 Subject: [TG3]: Update pci.ids for BCM5752 Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/pci/pci.ids | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/pci.ids b/drivers/pci/pci.ids index 93481b41b61..1d2ef1e2ffc 100644 --- a/drivers/pci/pci.ids +++ b/drivers/pci/pci.ids @@ -7173,6 +7173,7 @@ 080f Sentry5 DDR/SDR RAM Controller 0811 Sentry5 External Interface Core 0816 BCM3302 Sentry5 MIPS32 CPU + 1600 NetXtreme BCM5752 Gigabit Ethernet PCI Express 1644 NetXtreme BCM5700 Gigabit Ethernet 1014 0277 Broadcom Vigil B5700 1000Base-T 1028 00d1 Broadcom BCM5700 -- cgit v1.2.3-70-g09d2 From 49cabf49abd7676d026a61baabf5aae9337a82be Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:15:17 -0700 Subject: [TG3]: Add TSO firmware license Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fc9b5cd957a..d2050133930 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7,7 +7,12 @@ * Copyright (C) 2005 Broadcom Corporation. * * Firmware is: - * Copyright (C) 2000-2003 Broadcom Corporation. + * Derived from proprietary unpublished source code, + * Copyright (C) 2000-2003 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware + * data in hexadecimal or equivalent format, provided this copyright + * notice is accompanying it. */ #include -- cgit v1.2.3-70-g09d2 From 9ba27794197a18168b99ccecfb7b799f18b64426 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 6 Jun 2005 15:16:20 -0700 Subject: [TG3] Fix link failure in 5701 On some 5701 devices with older bootcode, the LED configuration bits in SRAM may be invalid with value zero. The fix is to check for invalid bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to error in programming the PHY. Thanks to Grant Grundler for debugging the problem. >From Grant: | In May, 2004, tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting | programmed and how to determine what to program into LED_CTRL. The new | code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write | to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was | saying MODE_MAC (0x0) and that doesn't work. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d2050133930..6315564d2dc 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8560,6 +8560,16 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) case NIC_SRAM_DATA_CFG_LED_MODE_MAC: tp->led_ctrl = LED_CTRL_MODE_MAC; + + /* Default to PHY_1_MODE if 0 (MAC_MODE) is + * read on some older 5700/5701 bootcode. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5701) + tp->led_ctrl = LED_CTRL_MODE_PHY_1; + break; case SHASTA_EXT_LED_SHARED: -- cgit v1.2.3-70-g09d2 From 15def7bfb6902aa2b2bc67059f26d696fb27c235 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 6 Jun 2005 15:22:56 -0700 Subject: [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6315564d2dc..e944aac258e 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.29" -#define DRV_MODULE_RELDATE "May 23, 2005" +#define DRV_MODULE_VERSION "3.30" +#define DRV_MODULE_RELDATE "June 6, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3-70-g09d2 From d0de98fa16169562bd74913c6c9b3857f9065c79 Mon Sep 17 00:00:00 2001 From: Alan Hourihane Date: Tue, 31 May 2005 19:50:49 +0100 Subject: [PATCH] i945G patch for agpgart Attached is a small patch for i945G support against 2.6.11.11. From: Alan Hourihane Signed-off-by: Dave Jones --- drivers/char/agp/intel-agp.c | 15 +++++++++++++-- include/linux/pci_ids.h | 2 ++ 2 files changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 8c7d727432b..6a5047e0d33 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -418,7 +418,8 @@ static void intel_i830_init_gtt_entries(void) case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; @@ -426,7 +427,8 @@ static void intel_i830_init_gtt_entries(void) case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; @@ -1662,6 +1664,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, } name = "915GM"; break; + case PCI_DEVICE_ID_INTEL_82945G_HB: + if (find_i830(PCI_DEVICE_ID_INTEL_82945G_IG)) { + bridge->driver = &intel_915_driver; + } else { + bridge->driver = &intel_845_driver; + } + name = "945G"; + break; case PCI_DEVICE_ID_INTEL_7505_0: bridge->driver = &intel_7505_driver; name = "E7505"; @@ -1801,6 +1811,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_7205_0), ID(PCI_DEVICE_ID_INTEL_82915G_HB), ID(PCI_DEVICE_ID_INTEL_82915GM_HB), + ID(PCI_DEVICE_ID_INTEL_82945G_HB), { } }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0d6134e1ee..18f734ec918 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2382,6 +2382,8 @@ #define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 #define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 #define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 +#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 +#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 #define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 #define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 #define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 -- cgit v1.2.3-70-g09d2 From e29b545cb153f230fbd8ff4c19bc98ab950f9f5c Mon Sep 17 00:00:00 2001 From: Michael Werner Date: Sun, 27 Mar 2005 22:08:42 -0800 Subject: [PATCH] sgi-agp: fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory This patch fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory. sgi-agp.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-) Signed-off-by: Mike Werner Signed-off-by: Dave Jones --- drivers/char/agp/sgi-agp.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 4b3eda26797..d3aa159c9de 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -133,11 +133,14 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, off_t j; void *temp; struct agp_bridge_data *bridge; + u64 *table; bridge = mem->bridge; if (!bridge) return -EINVAL; + table = (u64 *)bridge->gatt_table; + temp = bridge->current_size; switch (bridge->driver->size_type) { @@ -175,7 +178,7 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j = pg_start; while (j < (pg_start + mem->page_count)) { - if (*(bridge->gatt_table + j)) + if (table[j]) return -EBUSY; j++; } @@ -186,7 +189,7 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { - *(bridge->gatt_table + j) = + table[j] = bridge->driver->mask_memory(bridge, mem->memory[i], mem->type); } @@ -200,6 +203,7 @@ static int sgi_tioca_remove_memory(struct agp_memory *mem, off_t pg_start, { size_t i; struct agp_bridge_data *bridge; + u64 *table; bridge = mem->bridge; if (!bridge) @@ -209,8 +213,10 @@ static int sgi_tioca_remove_memory(struct agp_memory *mem, off_t pg_start, return -EINVAL; } + table = (u64 *)bridge->gatt_table; + for (i = pg_start; i < (mem->page_count + pg_start); i++) { - *(bridge->gatt_table + i) = 0; + table[i] = 0; } bridge->driver->tlb_flush(mem); -- cgit v1.2.3-70-g09d2 From 07eee78ea8ba2d0b7b20551c35a3e7dd158d50bb Mon Sep 17 00:00:00 2001 From: Keir Fraser Date: Wed, 30 Mar 2005 13:17:04 -0800 Subject: [PATCH] AGP fix for Xen VMM When Linux is running on the Xen virtual machine monitor, physical addresses are virtualised and cannot be directly referenced by the AGP GART. This patch fixes the GART driver for Xen by adding a layer of abstraction between physical addresses and 'GART addresses'. Architecture-specific functions are also defined for allocating and freeing the GATT. Xen requires this to ensure that table really is contiguous from the point of view of the GART. These extra interface functions are defined as 'no-ops' for all existing architectures that use the GART driver. Signed-off-by: Keir Fraser Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- drivers/char/agp/agp.h | 2 ++ drivers/char/agp/ali-agp.c | 4 ++-- drivers/char/agp/amd-k7-agp.c | 6 +++--- drivers/char/agp/amd64-agp.c | 4 ++-- drivers/char/agp/ati-agp.c | 6 +++--- drivers/char/agp/backend.c | 6 +++--- drivers/char/agp/efficeon-agp.c | 2 +- drivers/char/agp/generic.c | 17 ++++++++--------- drivers/char/agp/hp-agp.c | 4 ++-- drivers/char/agp/i460-agp.c | 4 ++-- drivers/char/agp/intel-agp.c | 6 +++--- drivers/char/agp/sworks-agp.c | 8 ++++---- drivers/char/agp/uninorth-agp.c | 2 +- include/asm-alpha/agp.h | 10 ++++++++++ include/asm-i386/agp.h | 10 ++++++++++ include/asm-ia64/agp.h | 10 ++++++++++ include/asm-ppc/agp.h | 10 ++++++++++ include/asm-ppc64/agp.h | 10 ++++++++++ include/asm-sparc64/agp.h | 10 ++++++++++ include/asm-x86_64/agp.h | 10 ++++++++++ 20 files changed, 106 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index ad9c11391d8..c1fe013c64f 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -278,6 +278,8 @@ void agp3_generic_cleanup(void); #define AGP_GENERIC_SIZES_ENTRIES 11 extern struct aper_size_info_16 agp3_generic_sizes[]; +#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x))) +#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x))) extern int agp_off; extern int agp_try_unsupported_boot; diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c index 0212febda65..9c9c9c2247c 100644 --- a/drivers/char/agp/ali-agp.c +++ b/drivers/char/agp/ali-agp.c @@ -150,7 +150,7 @@ static void *m1541_alloc_page(struct agp_bridge_data *bridge) pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp); pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, (((temp & ALI_CACHE_FLUSH_ADDR_MASK) | - virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN )); + virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN )); return addr; } @@ -174,7 +174,7 @@ static void m1541_destroy_page(void * addr) pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp); pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, (((temp & ALI_CACHE_FLUSH_ADDR_MASK) | - virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN)); + virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN)); agp_generic_destroy_page(addr); } diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index e62a3c2c44a..3a41672e4d6 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -43,7 +43,7 @@ static int amd_create_page_map(struct amd_page_map *page_map) SetPageReserved(virt_to_page(page_map->real)); global_cache_flush(); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL) { ClearPageReserved(virt_to_page(page_map->real)); @@ -154,7 +154,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Get the address for the gart region. * This is a bus address even on the alpha, b/c its @@ -167,7 +167,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for (i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) { - writel(virt_to_phys(amd_irongate_private.gatt_pages[i]->real) | 1, + writel(virt_to_gart(amd_irongate_private.gatt_pages[i]->real) | 1, page_dir.remapped+GET_PAGE_DIR_OFF(addr)); readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */ } diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 399c042f68f..1407945a589 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -219,7 +219,7 @@ static struct aper_size_info_32 amd_8151_sizes[7] = static int amd_8151_configure(void) { - unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real); + unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real); /* Configure AGP regs in each x86-64 host bridge. */ for_each_nb() { @@ -591,7 +591,7 @@ static void __devexit agp_amd64_remove(struct pci_dev *pdev) { struct agp_bridge_data *bridge = pci_get_drvdata(pdev); - release_mem_region(virt_to_phys(bridge->gatt_table_real), + release_mem_region(virt_to_gart(bridge->gatt_table_real), amd64_aperture_sizes[bridge->aperture_size_idx].size); agp_remove_bridge(bridge); agp_put_bridge(bridge); diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index a65f8827c28..e572ced9100 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -61,7 +61,7 @@ static int ati_create_page_map(ati_page_map *page_map) SetPageReserved(virt_to_page(page_map->real)); err = map_page_into_agp(virt_to_page(page_map->real)); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL || err) { ClearPageReserved(virt_to_page(page_map->real)); @@ -343,7 +343,7 @@ static int ati_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *) page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_bus(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Write out the size register */ current_size = A_SIZE_LVL2(agp_bridge->current_size); @@ -373,7 +373,7 @@ static int ati_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for(i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) { - writel(virt_to_bus(ati_generic_private.gatt_pages[i]->real) | 1, + writel(virt_to_gart(ati_generic_private.gatt_pages[i]->real) | 1, page_dir.remapped+GET_PAGE_DIR_OFF(addr)); readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */ } diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index 2f3dfb63bdc..4d4e602fdc7 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -148,7 +148,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) return -ENOMEM; } - bridge->scratch_page_real = virt_to_phys(addr); + bridge->scratch_page_real = virt_to_gart(addr); bridge->scratch_page = bridge->driver->mask_memory(bridge, bridge->scratch_page_real, 0); } @@ -189,7 +189,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) bridge->driver->agp_destroy_page( - phys_to_virt(bridge->scratch_page_real)); + gart_to_virt(bridge->scratch_page_real)); if (got_gatt) bridge->driver->free_gatt_table(bridge); if (got_keylist) { @@ -214,7 +214,7 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) bridge->driver->agp_destroy_page( - phys_to_virt(bridge->scratch_page_real)); + gart_to_virt(bridge->scratch_page_real)); } /* When we remove the global variable agp_bridge from all drivers diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index 1383c3165ea..ac19fdcd21c 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -219,7 +219,7 @@ static int efficeon_create_gatt_table(struct agp_bridge_data *bridge) efficeon_private.l1_table[index] = page; - value = __pa(page) | pati | present | index; + value = virt_to_gart(page) | pati | present | index; pci_write_config_dword(agp_bridge->dev, EFFICEON_ATTPAGE, value); diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index c321a924e38..d62505b5d25 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -153,7 +153,7 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(phys_to_virt(curr->memory[i])); + curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i])); } } agp_free_key(curr->key); @@ -209,7 +209,7 @@ struct agp_memory *agp_allocate_memory(struct agp_bridge_data *bridge, agp_free_memory(new); return NULL; } - new->memory[i] = virt_to_phys(addr); + new->memory[i] = virt_to_gart(addr); new->page_count++; } new->bridge = bridge; @@ -806,8 +806,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) break; } - table = (char *) __get_free_pages(GFP_KERNEL, - page_order); + table = alloc_gatt_pages(page_order); if (table == NULL) { i++; @@ -838,7 +837,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) size = ((struct aper_size_info_fixed *) temp)->size; page_order = ((struct aper_size_info_fixed *) temp)->page_order; num_entries = ((struct aper_size_info_fixed *) temp)->num_entries; - table = (char *) __get_free_pages(GFP_KERNEL, page_order); + table = alloc_gatt_pages(page_order); } if (table == NULL) @@ -853,7 +852,7 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) agp_gatt_table = (void *)table; bridge->driver->cache_flush(); - bridge->gatt_table = ioremap_nocache(virt_to_phys(table), + bridge->gatt_table = ioremap_nocache(virt_to_gart(table), (PAGE_SIZE * (1 << page_order))); bridge->driver->cache_flush(); @@ -861,11 +860,11 @@ int agp_generic_create_gatt_table(struct agp_bridge_data *bridge) for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) ClearPageReserved(page); - free_pages((unsigned long) table, page_order); + free_gatt_pages(table, page_order); return -ENOMEM; } - bridge->gatt_bus_addr = virt_to_phys(bridge->gatt_table_real); + bridge->gatt_bus_addr = virt_to_gart(bridge->gatt_table_real); /* AK: bogus, should encode addresses > 4GB */ for (i = 0; i < num_entries; i++) { @@ -919,7 +918,7 @@ int agp_generic_free_gatt_table(struct agp_bridge_data *bridge) for (page = virt_to_page(table); page <= virt_to_page(table_end); page++) ClearPageReserved(page); - free_pages((unsigned long) bridge->gatt_table_real, page_order); + free_gatt_pages(bridge->gatt_table_real, page_order); agp_gatt_table = NULL; bridge->gatt_table = NULL; diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index 6052bfa04c7..99762b6c19a 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -110,7 +110,7 @@ static int __init hp_zx1_ioc_shared(void) hp->gart_size = HP_ZX1_GART_SIZE; hp->gatt_entries = hp->gart_size / hp->io_page_size; - hp->io_pdir = phys_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE)); + hp->io_pdir = gart_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE)); hp->gatt = &hp->io_pdir[HP_ZX1_IOVA_TO_PDIR(hp->gart_base)]; if (hp->gatt[0] != HP_ZX1_SBA_IOMMU_COOKIE) { @@ -248,7 +248,7 @@ hp_zx1_configure (void) agp_bridge->mode = readl(hp->lba_regs+hp->lba_cap_offset+PCI_AGP_STATUS); if (hp->io_pdir_owner) { - writel(virt_to_phys(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE); + writel(virt_to_gart(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE); readl(hp->ioc_regs+HP_ZX1_PDIR_BASE); writel(hp->io_tlb_ps, hp->ioc_regs+HP_ZX1_TCNFG); readl(hp->ioc_regs+HP_ZX1_TCNFG); diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index adbea896c0d..94943298c03 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -372,7 +372,7 @@ static int i460_alloc_large_page (struct lp_desc *lp) } memset(lp->alloced_map, 0, map_size); - lp->paddr = virt_to_phys(lpage); + lp->paddr = virt_to_gart(lpage); lp->refcount = 0; atomic_add(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp); return 0; @@ -383,7 +383,7 @@ static void i460_free_large_page (struct lp_desc *lp) kfree(lp->alloced_map); lp->alloced_map = NULL; - free_pages((unsigned long) phys_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT); + free_pages((unsigned long) gart_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT); atomic_sub(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp); } diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6a5047e0d33..51266d6b4d7 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -286,7 +286,7 @@ static struct agp_memory *alloc_agpphysmem_i8xx(size_t pg_count, int type) if (new == NULL) return NULL; - new->memory[0] = virt_to_phys(addr); + new->memory[0] = virt_to_gart(addr); if (pg_count == 4) { /* kludge to get 4 physical pages for ARGB cursor */ new->memory[1] = new->memory[0] + PAGE_SIZE; @@ -329,10 +329,10 @@ static void intel_i810_free_by_type(struct agp_memory *curr) agp_free_key(curr->key); if(curr->type == AGP_PHYS_MEMORY) { if (curr->page_count == 4) - i8xx_destroy_pages(phys_to_virt(curr->memory[0])); + i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else agp_bridge->driver->agp_destroy_page( - phys_to_virt(curr->memory[0])); + gart_to_virt(curr->memory[0])); vfree(curr->memory); } kfree(curr); diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index 10c23302dd8..a9fb12c20eb 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -51,7 +51,7 @@ static int serverworks_create_page_map(struct serverworks_page_map *page_map) } SetPageReserved(virt_to_page(page_map->real)); global_cache_flush(); - page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real), + page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real), PAGE_SIZE); if (page_map->remapped == NULL) { ClearPageReserved(virt_to_page(page_map->real)); @@ -162,7 +162,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) /* Create a fake scratch directory */ for(i = 0; i < 1024; i++) { writel(agp_bridge->scratch_page, serverworks_private.scratch_dir.remapped+i); - writel(virt_to_phys(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i); + writel(virt_to_gart(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i); } retval = serverworks_create_gatt_pages(value->num_entries / 1024); @@ -174,7 +174,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) agp_bridge->gatt_table_real = (u32 *)page_dir.real; agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped; - agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real); + agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real); /* Get the address for the gart region. * This is a bus address even on the alpha, b/c its @@ -187,7 +187,7 @@ static int serverworks_create_gatt_table(struct agp_bridge_data *bridge) /* Calculate the agp offset */ for(i = 0; i < value->num_entries / 1024; i++) - writel(virt_to_phys(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i); + writel(virt_to_gart(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i); return 0; } diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index a673971f2a9..c8255312b8c 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -407,7 +407,7 @@ static int uninorth_create_gatt_table(struct agp_bridge_data *bridge) bridge->gatt_table_real = (u32 *) table; bridge->gatt_table = (u32 *)table; - bridge->gatt_bus_addr = virt_to_phys(table); + bridge->gatt_bus_addr = virt_to_gart(table); for (i = 0; i < num_entries; i++) bridge->gatt_table[i] = 0; diff --git a/include/asm-alpha/agp.h b/include/asm-alpha/agp.h index c99dbbb5bcb..ef855a3bc0f 100644 --- a/include/asm-alpha/agp.h +++ b/include/asm-alpha/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-i386/agp.h b/include/asm-i386/agp.h index a917ff50354..b82f5f3ab88 100644 --- a/include/asm-i386/agp.h +++ b/include/asm-i386/agp.h @@ -21,4 +21,14 @@ int unmap_page_from_agp(struct page *page); worth it. Would need a page for it. */ #define flush_agp_cache() asm volatile("wbinvd":::"memory") +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h index d1316f1e6ee..4e517f0e6af 100644 --- a/include/asm-ia64/agp.h +++ b/include/asm-ia64/agp.h @@ -18,4 +18,14 @@ #define flush_agp_mappings() /* nothing */ #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif /* _ASM_IA64_AGP_H */ diff --git a/include/asm-ppc/agp.h b/include/asm-ppc/agp.h index be27cfa8c5b..ca9e423307f 100644 --- a/include/asm-ppc/agp.h +++ b/include/asm-ppc/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-ppc64/agp.h b/include/asm-ppc64/agp.h index be27cfa8c5b..ca9e423307f 100644 --- a/include/asm-ppc64/agp.h +++ b/include/asm-ppc64/agp.h @@ -10,4 +10,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h index ba05bdf9a21..58f8cb6ae76 100644 --- a/include/asm-sparc64/agp.h +++ b/include/asm-sparc64/agp.h @@ -8,4 +8,14 @@ #define flush_agp_mappings() #define flush_agp_cache() mb() +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif diff --git a/include/asm-x86_64/agp.h b/include/asm-x86_64/agp.h index 0bb9019d58a..06c52ee9c06 100644 --- a/include/asm-x86_64/agp.h +++ b/include/asm-x86_64/agp.h @@ -19,4 +19,14 @@ int unmap_page_from_agp(struct page *page); worth it. Would need a page for it. */ #define flush_agp_cache() asm volatile("wbinvd":::"memory") +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + #endif -- cgit v1.2.3-70-g09d2 From 66bb8bf8b235ba4d37fda14375827864977c6a3e Mon Sep 17 00:00:00 2001 From: David Mosberger Date: Mon, 4 Apr 2005 13:29:43 -0700 Subject: [PATCH] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0). [AGPGART] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0). As mentioned earlier, the current check_bridge_mode() code assumes that AGP bridges are PCI devices. This isn't always true. Definitely not for HP zx1 chipset and the same seems to be the case for SGI's AGP bridge. The patch below fixes the problem by picking up the AGP_MODE_3_0 bit from bridge->mode. I feel like I may be missing something, since I can't see any reason why check_bridge_mode() wasn't doing that in the first place. According to the AGP 3.0 specs, the AGP_MODE_3_0 bit is determined during the hardware reset and cannot be changed, so it seems to me it should be safe to pick it up from bridge->mode. With the patch applied, I can definitely use AGP acceleration both with AGP 2.0 and AGP 3.0 (one with an Nvidia card, the other with an ATI FireGL card). Unless someone spots a problem, please apply this patch so 3d acceleration can work on zx1 boxes again. This makes AGP work again on machines with an AGP bridge that isn't a PCI device. Signed-off-by: David Mosberger-Tang Signed-off-by: Dave Jones --- drivers/char/agp/generic.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index d62505b5d25..f0079e991bd 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -295,19 +295,6 @@ int agp_num_entries(void) EXPORT_SYMBOL_GPL(agp_num_entries); -static int check_bridge_mode(struct pci_dev *dev) -{ - u32 agp3; - u8 cap_ptr; - - cap_ptr = pci_find_capability(dev, PCI_CAP_ID_AGP); - pci_read_config_dword(dev, cap_ptr+AGPSTAT, &agp3); - if (agp3 & AGPSTAT_MODE_3_0) - return 1; - return 0; -} - - /** * agp_copy_info - copy bridge state information * @@ -328,7 +315,7 @@ int agp_copy_info(struct agp_bridge_data *bridge, struct agp_kern_info *info) info->version.minor = bridge->version->minor; info->chipset = SUPPORTED; info->device = bridge->dev; - if (check_bridge_mode(bridge->dev)) + if (bridge->mode & AGPSTAT_MODE_3_0) info->mode = bridge->mode & ~AGP3_RESERVED_MASK; else info->mode = bridge->mode & ~AGP2_RESERVED_MASK; @@ -661,7 +648,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode bridge_agpstat &= ~AGPSTAT_FW; /* Check to see if we are operating in 3.0 mode */ - if (check_bridge_mode(agp_bridge->dev)) + if (agp_bridge->mode & AGPSTAT_MODE_3_0) agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); else agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat); @@ -732,7 +719,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* Do AGP version specific frobbing. */ if (bridge->major_version >= 3) { - if (check_bridge_mode(bridge->dev)) { + if (bridge->mode & AGPSTAT_MODE_3_0) { /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); -- cgit v1.2.3-70-g09d2 From a86d1f4301fad4ff44c1f614c897000bc574ab2f Mon Sep 17 00:00:00 2001 From: Vojtech Pavlik Date: Tue, 7 Jun 2005 13:22:14 -0700 Subject: [PATCH] input: disable scroll feature on AT keyboards This patch disables the scroll feature on AT keyboards by default, because it causes the numbers of mouse devices to shift, breaking user setups. Signed-off-by: Vojtech Pavlik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/keyboard/atkbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index af0446c6de8..48fdf1e517c 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -54,7 +54,7 @@ static int atkbd_softraw = 1; module_param_named(softraw, atkbd_softraw, bool, 0); MODULE_PARM_DESC(softraw, "Use software generated rawmode"); -static int atkbd_scroll = 1; +static int atkbd_scroll = 0; module_param_named(scroll, atkbd_scroll, bool, 0); MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); -- cgit v1.2.3-70-g09d2 From 93cffffa19960464a52f9c78d9a6150270d23785 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 7 Jun 2005 13:22:18 -0700 Subject: [PATCH] PCI: do VIA IRQ fixup always, not just in PIC mode At least some VIA chipsets require the fixup even in IO-APIC mode. This was found and debugged with the patient assistance of Stian Jordet on an Asus CUV266-DLS motherboard. Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 35 +++++++++++++---------------------- 1 file changed, 13 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 637e9493034..2194669300b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -459,17 +459,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, #endif /* CONFIG_X86_IO_APIC */ -/* - * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: - * when written, it makes an internal connection to the PIC. - * For these devices, this register is defined to be 4 bits wide. - * Normally this is fine. However for IO-APIC motherboards, or - * non-x86 architectures (yes Via exists on PPC among other places), - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get - * interrupts delivered properly. - */ - /* * FIXME: it is questionable that quirk_via_acpi * is needed. It shows up as an ISA bridge, and does not @@ -492,28 +481,30 @@ static void __devinit quirk_via_acpi(struct pci_dev *d) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); -static void quirk_via_irqpic(struct pci_dev *dev) +/* + * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature: + * when written, it makes an internal connection to the PIC. + * For these devices, this register is defined to be 4 bits wide. + * Normally this is fine. However for IO-APIC motherboards, or + * non-x86 architectures (yes Via exists on PPC among other places), + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get + * interrupts delivered properly. + */ +static void quirk_via_irq(struct pci_dev *dev) { u8 irq, new_irq; -#ifdef CONFIG_X86_IO_APIC - if (nr_ioapics && !skip_ioapic_setup) - return; -#endif -#ifdef CONFIG_ACPI - if (acpi_irq_model != ACPI_IRQ_MODEL_PIC) - return; -#endif new_irq = dev->irq & 0xf; pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); if (new_irq != irq) { - printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n", + printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n", pci_name(dev), irq, new_irq); udelay(15); /* unknown if delay really needed */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); } } -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); /* * PIIX3 USB: We have to disable USB interrupts that are -- cgit v1.2.3-70-g09d2 From ff39bc772ad18d8c7f9334926053b718d7932de0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 8 Jun 2005 19:26:47 +0100 Subject: [PATCH] Serial: remove unused variable in sa1100 driver Signed-off-by: Russell King --- drivers/serial/sa1100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 22565a67a57..98641c3f5ab 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -197,7 +197,7 @@ static void sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs) { struct tty_struct *tty = sport->port.info->tty; - unsigned int status, ch, flg, ignored = 0; + unsigned int status, ch, flg; status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | UTSR0_TO_SM(UART_GET_UTSR0(sport)); -- cgit v1.2.3-70-g09d2 From 6d1cfbab4de64f2d0c5b0f81177ade0d75b69288 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 8 Jun 2005 14:13:14 -0700 Subject: [TG3]: Fix 5700/5701 DMA corruption on Apple G4. Fix 5700/5701 DMA write corruption on Apple G4 by detecting the Apple UniNorth PCI 1.5 chipset and adjusting the DMA write boundary to 16. DMA test fails to detect the problem with this chipset. Thanks to Manuel Perez Ayala for reporting the problem and helping to debug it. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 18 ++++++++++++++++-- include/linux/pci_ids.h | 1 + 2 files changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e944aac258e..77337c3b428 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9695,10 +9695,24 @@ static int __devinit tg3_test_dma(struct tg3 *tp) } if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != DMA_RWCTRL_WRITE_BNDRY_16) { + static struct pci_device_id dma_wait_state_chipsets[] = { + { PCI_DEVICE(PCI_VENDOR_ID_APPLE, + PCI_DEVICE_ID_APPLE_UNI_N_PCI15) }, + { }, + }; + /* DMA test passed without adjusting DMA boundary, - * just restore the calculated DMA boundary + * now look for chipsets that are known to expose the + * DMA bug without failing the test. */ - tp->dma_rwctrl = saved_dma_rwctrl; + if (pci_dev_present(dma_wait_state_chipsets)) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; + } + else + /* Safe to use the calculated DMA boundary. */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 18f734ec918..b8b4ebf9abf 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -874,6 +874,7 @@ #define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d +#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e #define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 #define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 #define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033 -- cgit v1.2.3-70-g09d2 From ed7fce6c13bdd802817e1988d67047d432e7e30b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 8 Jun 2005 14:15:52 -0700 Subject: [TG3]: Update driver version and release date. Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 77337c3b428..a0b8848049c 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -66,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.30" -#define DRV_MODULE_RELDATE "June 6, 2005" +#define DRV_MODULE_VERSION "3.31" +#define DRV_MODULE_RELDATE "June 8, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.3-70-g09d2 From 4f58802fae8a51d9e79454746584175c14f84519 Mon Sep 17 00:00:00 2001 From: Lars Marowsky-Bree Date: Wed, 8 Jun 2005 15:50:31 -0700 Subject: [PATCH] dm: Handle READA requests in dm-mpath.c READA errors failing with EWOULDBLOCK/EAGAIN do not constitute a valid reason for failing the path; this lead to erratic errors on DM multipath devices. This error can be safely propagated upwards without failing the path. Acked-by: Kevin Corry Acked-by: Jens Axboe Signed-off-by: Lars Marowsky-Bree Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/dm-mpath.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 1e97b3c12bd..0c1b8520ef8 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -985,6 +985,9 @@ static int do_end_io(struct multipath *m, struct bio *bio, if (!error) return 0; /* I/O complete */ + if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio)) + return error; + spin_lock(&m->lock); if (!m->nr_valid_paths) { if (!m->queue_if_no_path || m->suspended) { -- cgit v1.2.3-70-g09d2 From e1dd23a0012c3929737798fda9fede0e783f4ff3 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 8 Jun 2005 13:02:25 +0200 Subject: [PATCH] sata_sil: Fix FIFO PCI Bus Arbitration kernel oops Correct this. diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c --- drivers/scsi/sata_sil.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 238580d244e..49ed557a4b6 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -432,7 +432,13 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) writeb(cls, mmio_base + SIL_FIFO_R0); writeb(cls, mmio_base + SIL_FIFO_W0); writeb(cls, mmio_base + SIL_FIFO_R1); - writeb(cls, mmio_base + SIL_FIFO_W2); + writeb(cls, mmio_base + SIL_FIFO_W1); + if (ent->driver_data == sil_3114) { + writeb(cls, mmio_base + SIL_FIFO_R2); + writeb(cls, mmio_base + SIL_FIFO_W2); + writeb(cls, mmio_base + SIL_FIFO_R3); + writeb(cls, mmio_base + SIL_FIFO_W3); + } } else printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n", pci_name(pdev)); -- cgit v1.2.3-70-g09d2 From 6952df035509717bdc46194b2a3d6ffb9349f267 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 6 Jun 2005 15:56:03 +0800 Subject: [PATCH] sg traverse fix for __atapi_pio_bytes() Problem: Incorrect md5sum when using ATAPI PIO mode to verify a distro CD. Root cause: sg traverse problem. In __atapi_pio_bytes(), if qc->cursg++ is increased and "goto next_page" is executed, then sg is not updated to the new qc->cursg and the old sg is overwritten with the new data. Changes: - Replace "goto next_page" with "goto next_sg" to make sg updated. Signed-off-by: Albert Lee --- drivers/scsi/libata-core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 21d194c6ace..9e58f134f68 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2577,7 +2577,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) next_sg: sg = &qc->sg[qc->cursg]; -next_page: page = sg->page; offset = sg->offset + qc->cursg_ofs; @@ -2585,6 +2584,7 @@ next_page: page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; + /* don't overrun current sg */ count = min(sg->length - qc->cursg_ofs, bytes); /* don't cross page boundaries */ @@ -2609,8 +2609,6 @@ next_page: kunmap(page); if (bytes) { - if (qc->cursg_ofs < sg->length) - goto next_page; goto next_sg; } } -- cgit v1.2.3-70-g09d2 From 03e49d40ea3436cae0fe43708f11584130ee4a0c Mon Sep 17 00:00:00 2001 From: Scott Murray Date: Mon, 6 Jun 2005 15:48:04 -0400 Subject: [PATCH] PCI Hotplug: fix CPCI reference counting bug Here's a patch that fixes up the pci_dev refcounting in the CPCI code. I've done some testing against it and it seems fine here. Signed-off-by: Scott Murray Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/cpci_hotplug_core.c | 2 ++ drivers/pci/hotplug/cpci_hotplug_pci.c | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 8132d946c38..30af105271a 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -217,6 +217,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot) kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); + if (slot->dev) + pci_dev_put(slot->dev); kfree(slot); } diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index c878028ad21..225b5e551dd 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -315,9 +315,12 @@ int cpci_unconfigure_slot(struct slot* slot) PCI_DEVFN(PCI_SLOT(slot->devfn), i)); if (dev) { pci_remove_bus_device(dev); - slot->dev = NULL; + pci_dev_put(dev); } } + pci_dev_put(slot->dev); + slot->dev = NULL; + dbg("%s - exit", __FUNCTION__); return 0; } -- cgit v1.2.3-70-g09d2 From 9f793d2c77ec5818679e4747c554d9333cecf476 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 6 Jun 2005 13:54:59 -0700 Subject: [PATCH] USB: fix ub issues This smoothes two imperfections: - Increase number of LUNs per device from 4 to 9. The best solution would be to remove this limit altogether, but that has to wait until the time when more than 26 hosts are allowed. - Replace mdelay with msleep in a probing routine. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index adc4dcc306f..19c5e59bcfa 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -51,7 +51,7 @@ * This many LUNs per USB device. * Every one of them takes a host, see UB_MAX_HOSTS. */ -#define UB_MAX_LUNS 4 +#define UB_MAX_LUNS 9 /* */ @@ -2100,7 +2100,7 @@ static int ub_probe(struct usb_interface *intf, nluns = rc; break; } - mdelay(100); + msleep(100); } for (i = 0; i < nluns; i++) { -- cgit v1.2.3-70-g09d2 From 76854ceac3ef3408ab9a50a2521147fb14779f58 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 2 Jun 2005 10:34:11 +0100 Subject: [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott Signed-off-by: Daniel Smertnig Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 118 ++++++++++++++++++++++++++++++++---------- 1 file changed, 91 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 051c3a77b41..3bfcc7b9f86 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -264,7 +264,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.1" +#define DRIVER_VERSION "v1.4.2" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober " #define DRIVER_DESC "USB FTDI Serial Converters Driver" @@ -687,6 +687,8 @@ struct ftdi_private { char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ + struct work_struct rx_work; + int rx_processed; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ @@ -717,7 +719,7 @@ static int ftdi_write_room (struct usb_serial_port *port); static int ftdi_chars_in_buffer (struct usb_serial_port *port); static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs); static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void ftdi_process_read (struct usb_serial_port *port); +static void ftdi_process_read (void *param); static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old); static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); @@ -1387,6 +1389,8 @@ static int ftdi_common_startup (struct usb_serial *serial) port->read_urb->transfer_buffer_length = BUFSZ; } + INIT_WORK(&priv->rx_work, ftdi_process_read, port); + /* Free port's existing write urb and transfer buffer. */ if (port->write_urb) { usb_free_urb (port->write_urb); @@ -1617,6 +1621,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->rx_lock, flags); /* Start reading from the device */ + priv->rx_processed = 0; usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, @@ -1667,6 +1672,10 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) err("Error from RTS LOW urb"); } } /* Note change no line if hupcl is off */ + + /* cancel any scheduled reading */ + cancel_delayed_work(&priv->rx_work); + flush_scheduled_work(); /* shutdown our bulk read */ if (port->read_urb) @@ -1862,23 +1871,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } - /* If throttled, delay receive processing until unthrottled. */ - spin_lock(&priv->rx_lock); - if (priv->rx_flags & THROTTLED) { - dbg("Deferring read urb processing until unthrottled"); - priv->rx_flags |= ACTUALLY_THROTTLED; - spin_unlock(&priv->rx_lock); - return; - } - spin_unlock(&priv->rx_lock); - ftdi_process_read(port); } /* ftdi_read_bulk_callback */ -static void ftdi_process_read (struct usb_serial_port *port) +static void ftdi_process_read (void *param) { /* ftdi_process_read */ + struct usb_serial_port *port = (struct usb_serial_port*)param; struct urb *urb; struct tty_struct *tty; struct ftdi_private *priv; @@ -1889,6 +1889,7 @@ static void ftdi_process_read (struct usb_serial_port *port) int result; int need_flip; int packet_offset; + unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -1915,12 +1916,18 @@ static void ftdi_process_read (struct usb_serial_port *port) data = urb->transfer_buffer; - /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + if (priv->rx_processed) { + dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + priv->rx_processed, + urb->actual_length - priv->rx_processed); } else { - dbg("Status only: %03oo %03oo",data[0],data[1]); - } + /* The first two bytes of every read packet are status */ + if (urb->actual_length > 2) { + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + } else { + dbg("Status only: %03oo %03oo",data[0],data[1]); + } + } /* TO DO -- check for hung up line and handle appropriately: */ @@ -1929,8 +1936,12 @@ static void ftdi_process_read (struct usb_serial_port *port) /* if CD is dropped and the line is not CLOCAL then we should hangup */ need_flip = 0; - for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + int length; + /* Compare new line status to the old one, signal if different */ + /* N.B. packet may be processed more than once, but differences + * are only processed once. */ if (priv != NULL) { char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; if (new_status != priv->prev_status) { @@ -1940,6 +1951,35 @@ static void ftdi_process_read (struct usb_serial_port *port) } } + length = min(PKTSZ, urb->actual_length-packet_offset)-2; + if (length < 0) { + err("%s - bad packet length: %d", __FUNCTION__, length+2); + length = 0; + } + + /* have to make sure we don't overflow the buffer + with tty_insert_flip_char's */ + if (tty->flip.count+length > TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + need_flip = 0; + + if (tty->flip.count != 0) { + /* flip didn't work, this happens when ftdi_process_read() is + * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */ + dbg("%s - flip buffer push failed", __FUNCTION__); + break; + } + } + if (priv->rx_flags & THROTTLED) { + dbg("%s - throttled", __FUNCTION__); + break; + } + if (tty->ldisc.receive_room(tty)-tty->flip.count < length) { + /* break out & wait for throttling/unthrottling to happen */ + dbg("%s - receive room low", __FUNCTION__); + break; + } + /* Handle errors and break */ error_flag = TTY_NORMAL; /* Although the device uses a bitmask and hence can have multiple */ @@ -1962,13 +2002,8 @@ static void ftdi_process_read (struct usb_serial_port *port) error_flag = TTY_FRAME; dbg("FRAMING error"); } - if (urb->actual_length > packet_offset + 2) { - for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) { - /* have to make sure we don't overflow the buffer - with tty_insert_flip_char's */ - if(tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } + if (length > 0) { + for (i = 2; i < length+2; i++) { /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ @@ -2005,6 +2040,35 @@ static void ftdi_process_read (struct usb_serial_port *port) tty_flip_buffer_push(tty); } + if (packet_offset < urb->actual_length) { + /* not completely processed - record progress */ + priv->rx_processed = packet_offset; + dbg("%s - incomplete, %d bytes processed, %d remain", + __FUNCTION__, packet_offset, + urb->actual_length - packet_offset); + /* check if we were throttled while processing */ + spin_lock_irqsave(&priv->rx_lock, flags); + if (priv->rx_flags & THROTTLED) { + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); + dbg("%s - deferring remainder until unthrottled", + __FUNCTION__); + return; + } + spin_unlock_irqrestore(&priv->rx_lock, flags); + /* if the port is closed stop trying to read */ + if (port->open_count > 0){ + /* delay processing of remainder */ + schedule_delayed_work(&priv->rx_work, 1); + } else { + dbg("%s - port is closed", __FUNCTION__); + } + return; + } + + /* urb is completely processed */ + priv->rx_processed = 0; + /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ @@ -2444,7 +2508,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) spin_unlock_irqrestore(&priv->rx_lock, flags); if (actually_throttled) - ftdi_process_read(port); + schedule_work(&priv->rx_work); } static int __init ftdi_init (void) -- cgit v1.2.3-70-g09d2 From 1e06276704c101bd1ae7b62879faaffcd7496a3e Mon Sep 17 00:00:00 2001 From: Narendra Sankar Date: Fri, 6 May 2005 12:00:05 -0700 Subject: [PATCH] PCI: MSI functionality broken on Serverworks GC chipset MSI functionality is broken on the GC_LE x86 chipset that Serverworks developed and that is being used in various platforms today. Broadcom is going to push out to the kernel MSI enabled Gigabit drivers (in the very near future), and we would like to make sure that MSI does not get enabled on any platforms using the GC_LE chipset (device id 0x17). Following the AMD 8131 example, I am including a patch to disable MSI functionality when a GCNB_LE is detected. Please let me know if there are any issues with this. This is a permanent fix for this chipset, as the hardware will not be updated. Signed-off-by: Narendra Sankar Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2194669300b..968033fd29f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -456,6 +456,12 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic ); +static void __init quirk_svw_msi(struct pci_dev *dev) +{ + pci_msi_quirk = 1; + printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi ); #endif /* CONFIG_X86_IO_APIC */ -- cgit v1.2.3-70-g09d2 From 243cd55e021baf28babdd88112ac03ae5cd4bb9c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Jun 2005 12:36:33 -0700 Subject: [PATCH] iseries_veth: Supress spurious WARN_ON() at module unload My patch from a few weeks back (now in mainline), called "Cleanup skbs to prevent unregister_netdevice() hanging", can cause our TX timeout code to fire on machines with lots of VLANs (because it takes > 2 seconds between when we stop the queues and when we're finished stopping the connections). When that happens the TX timeout code freaks out and does a WARN_ON() because as far as it's concerned there shouldn't be a TX timeout happening, which is fair enough. I have a "proper" fix for this, which is to a) do refcounting on connections and b) implement a proper ack timer so we don't keep unacked skbs lying around for ever. But for 2.6.12 I propose just supressing the WARN_ON(). Users will still see the "NETDEV WATCHDOG" warning, but that's not nearly as bad as a WARN_ON() which users interpret as an Oops. Signed-off-by: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/iseries_veth.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 13ed8dc1e91..55af32e9bf0 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -802,13 +802,14 @@ static void veth_tx_timeout(struct net_device *dev) spin_lock_irqsave(&port->pending_gate, flags); + if (!port->pending_lpmask) { + spin_unlock_irqrestore(&port->pending_gate, flags); + return; + } + printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n", dev->name, port->pending_lpmask); - /* If we've timed out the queue must be stopped, which should - * only ever happen when there is a pending packet. */ - WARN_ON(! port->pending_lpmask); - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { struct veth_lpar_connection *cnx = veth_cnx[i]; -- cgit v1.2.3-70-g09d2 From 0086b5ec7834b78358dea3f713275a9ae2b229ec Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 10 Jun 2005 14:19:02 +1000 Subject: [PATCH] ppc32: Fix nasty sleep/wakeup problem Despite all the care lately in making the powermac sleep/wakeup as robust as possible, there is still a nasty related to the use of cpufreq on PMU based machines. Unfortunately, it affects paulus old powerbook so I have to fix it :) We didn't manage to understand what is precisely going on, it leads to memory corruption and might have to do with RAM not beeing properly refreshed when a cpufreq transition is done right before the sleep. The best workaround (and less intrusive at this point) we could come up with is included in this patch. We basically do _not_ force a switch to high speed on suspend anymore (that is what is causing the problem) on those machines. We still force a speed switch on wakeup (since we don't know what speed we are coming back from sleep at, and that seems to work fine). Since, during this short interval, the actual CPU speed might be incorrect, we also hack around by multiplying loops_per_jiffy by 2 (max speed factor on those machines) during early wakeup stage to make sure udelay's during that time aren't too short. For after 2.6.12, we'll change udelay implementation to use the CPU timebase (which is always constant) instead like we do on ppc64 and thus get rid of all those problems. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc/platforms/pmac_cpufreq.c | 7 +++++-- drivers/macintosh/via-pmu.c | 6 ++++++ 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index 937f46df711..5fdd4f607a4 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -83,7 +83,7 @@ static u32 frequency_gpio; static u32 slew_done_gpio; static int no_schedule; static int has_cpu_l2lve; - +static int is_pmu_based; /* There are only two frequency states for each processor. Values * are in kHz for the time being. @@ -463,7 +463,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) */ no_schedule = 1; sleep_freq = cur_freq; - if (cur_freq == low_freq) + if (cur_freq == low_freq && !is_pmu_based) do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -588,6 +588,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) return 1; hi_freq = (*value) / 1000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; return 0; } @@ -692,6 +693,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 400000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for TiPb 400 & 500 */ else if (machine_is_compatible("PowerBook3,2")) { @@ -703,6 +705,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 300000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for 750FX */ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index bb9f4044c74..b941ee22099 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2593,6 +2593,9 @@ powerbook_sleep_Core99(void) /* Restore VIA */ restore_via_state(); + /* tweak LPJ before cpufreq is there */ + loops_per_jiffy *= 2; + /* Restore video */ pmac_call_early_video_resume(); @@ -2613,6 +2616,9 @@ powerbook_sleep_Core99(void) pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); pmu_wait_complete(&req); + /* Restore LPJ, cpufreq will adjust the cpu frequency */ + loops_per_jiffy /= 2; + pmac_wakeup_devices(); return 0; -- cgit v1.2.3-70-g09d2 From e98ded32f37a538b906d98059b3db71be36405a7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jun 2005 18:47:38 +1000 Subject: [PATCH] drm add i945G pci id Add pci identifier for i945G chipset Signed-off-by: Dave Airlie --- drivers/char/drm/drm_pciids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 54a2914e3a3..11c6950158b 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -220,5 +220,6 @@ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} -- cgit v1.2.3-70-g09d2 From 74e8ebc55d85ca1acb3e73610965bea63cc39054 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 10 Jun 2005 19:27:51 +1000 Subject: [PATCH] remove bogus hack from radeon IRQ handler This removes a bogus hack from the radeon IRQ handler. There is a better fix from myself and benh in DRM CVS but I'll wait until 2.6.13-rc so it gets more testing. Signed-off-by: Dave Airlie --- drivers/char/drm/radeon_irq.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 5b18bee6492..cd25f28e26a 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -123,11 +123,6 @@ static int radeon_wait_irq(drm_device_t *dev, int swi_nr) dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - /* This is a hack to work around mysterious freezes on certain - * systems: - */ - radeon_acknowledge_irqs( dev_priv ); - DRM_WAIT_ON( ret, dev_priv->swi_queue, 3 * DRM_HZ, RADEON_READ( RADEON_LAST_SWI_REG ) >= swi_nr ); -- cgit v1.2.3-70-g09d2 From 392a8b7efe069564bf7ed057103b1a3f41e55734 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 10:57:40 +0200 Subject: [PATCH] IrDA: IrDA: Fix CONFIG_VIA_FIR typo (double `those') Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/net/irda/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 1c553d7efdd..ca5914091d3 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -389,7 +389,7 @@ config VIA_FIR help Say Y here if you want to build support for the VIA VT8231 and VIA VT1211 IrDA controllers, found on the motherboards using - those those VIA chipsets. To use this controller, you will need + those VIA chipsets. To use this controller, you will need to plug a specific 5 pins FIR IrDA dongle in the specific motherboard connector. The driver provides support for SIR, MIR and FIR (4Mbps) speeds. -- cgit v1.2.3-70-g09d2 From c3315ede1bdf7bc706b59870df41b9cdb6e3995a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Jun 2005 11:25:42 +0200 Subject: [PATCH] M68k: Mark Sun-3 NCR5380 SCSI broken M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/configs/sun3_defconfig | 1 - drivers/scsi/Kconfig | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index b96b4584735..af903b5c570 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -173,7 +173,6 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set -CONFIG_SUN3_SCSI=y # # Multi-device support (RAID and LVM) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 1811cb24031..27fec8a5eb5 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1752,7 +1752,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" - depends on SUN3 && SCSI + depends on SUN3 && SCSI && BROKEN help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for -- cgit v1.2.3-70-g09d2 From 8d5f7b4353dae4c7ee342c61303372fd996ca161 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 11 Jun 2005 09:45:30 +1000 Subject: [PATCH] radeonfb: don't blow up VGA console on load The current radeonfb memset's the framebuffer to 0 when loaded. This removes occasional artifacts but has the nasty side effect that if you load radeonfb without framebuffer console, you destroy the VGA text buffer, font, etc... radeon must not touch the framebuffer content when it doesn't "own" it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_base.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index ee25b9e8db6..47a6b12bc96 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -2374,10 +2374,9 @@ static int radeonfb_pci_register (struct pci_dev *pdev, } while ( rinfo->fb_base == 0 && ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) ); - if (rinfo->fb_base) - memset_io(rinfo->fb_base, 0, rinfo->mapped_vram); - else { - printk (KERN_ERR "radeonfb (%s): cannot map FB\n", pci_name(rinfo->pdev)); + if (rinfo->fb_base == NULL) { + printk (KERN_ERR "radeonfb (%s): cannot map FB\n", + pci_name(rinfo->pdev)); ret = -EIO; goto err_unmap_rom; } -- cgit v1.2.3-70-g09d2 From c0105338eb4e61e537ca34ae06921177cb6efcf0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 11 Jun 2005 18:00:52 +0100 Subject: [PATCH] pwc bug fix The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/media/pwc/pwc-if.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index 5429ff3b975..b77e65c0365 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -332,10 +332,6 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) #endif ; } - if (kbuf == NULL) { - Err("Failed to allocate decompress table.\n"); - return -ENOMEM; - } pdev->decompress_data = kbuf; /* Allocate image buffer; double buffer for mmap() */ -- cgit v1.2.3-70-g09d2 From c22fa3acbc2ef79ea57217643f6cd6d226963069 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 13 Jun 2005 07:15:28 -0700 Subject: [PATCH] spin longer for ehci port reset completion This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf , some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/usb/host/ehci-hub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 429330bc38d..d7b4f7939de 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -439,9 +439,12 @@ static int ehci_hub_control ( /* force reset to complete */ writel (temp & ~PORT_RESET, &ehci->regs->port_status [wIndex]); + /* REVISIT: some hardware needs 550+ usec to clear + * this bit; seems too long to spin routinely... + */ retval = handshake ( &ehci->regs->port_status [wIndex], - PORT_RESET, 0, 500); + PORT_RESET, 0, 750); if (retval != 0) { ehci_err (ehci, "port %d reset error %d\n", wIndex + 1, retval); -- cgit v1.2.3-70-g09d2 From 979b6c135fc4d466a39d8e3ec05583e5ee30261a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 13 Jun 2005 14:30:40 -0700 Subject: [NET]: Move the netdev list to vger.kernel.org. From: Ralf Baechle There are archives of the old list at http://oss.sgi.com/archives/netdev Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- Documentation/networking/vortex.txt | 2 +- MAINTAINERS | 48 ++++++++++++++++++------------------- drivers/net/r8169.c | 2 +- net/sched/act_api.c | 2 +- 4 files changed, 27 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index fa12a9e4abd..80e1cb19609 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: Andrew Morton - Netdev mailing list + Netdev mailing list Linux kernel mailing list Please note the 'Reporting and Diagnosing Problems' section at the end diff --git a/MAINTAINERS b/MAINTAINERS index 65ad8251e4b..86ba94f16e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -73,7 +73,7 @@ S: Status, one of the following: 3C359 NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -81,13 +81,13 @@ S: Maintained 3C505 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3CR990 NETWORK DRIVER P: David Dillow M: dave@thedillows.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 3W-XXXX ATA-RAID CONTROLLER DRIVER @@ -130,7 +130,7 @@ S: Maintained 8169 10/100/1000 GIGABIT ETHERNET DRIVER P: Francois Romieu M: romieu@fr.zoreil.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER @@ -143,7 +143,7 @@ S: Maintained 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.] P: Paul Gortmaker M: p_gortmaker@yahoo.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained A2232 SERIAL BOARD DRIVER @@ -332,7 +332,7 @@ S: Maintained ARPD SUPPORT P: Jonathan Layes -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ASUS ACPI EXTRAS DRIVER @@ -706,7 +706,7 @@ S: Orphaned DIGI RIGHTSWITCH NETWORK DRIVER P: Rick Richardson -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://www.digi.com S: Orphaned @@ -812,7 +812,7 @@ S: Maintained ETHEREXPRESS-16 NETWORK DRIVER P: Philip Blundell M: philb@gnu.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained ETHERNET BRIDGE @@ -875,7 +875,7 @@ S: Maintained FRAME RELAY DLCI/FRAD (Sangoma drivers too) P: Mike McLagan M: mike.mclagan@linux.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained FREEVXFS FILESYSTEM @@ -1215,7 +1215,7 @@ S: Maintained IPX NETWORK LAYER P: Arnaldo Carvalho de Melo M: acme@conectiva.com.br -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IRDA SUBSYSTEM @@ -1482,7 +1482,7 @@ MARVELL MV64340 ETHERNET DRIVER P: Manish Lachwani M: Manish_Lachwani@pmc-sierra.com L: linux-mips@linux-mips.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported MATROX FRAMEBUFFER DRIVER @@ -1592,13 +1592,13 @@ P: Andrew Morton M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NETWORKING [GENERAL] P: Networking Team -M: netdev@oss.sgi.com -L: netdev@oss.sgi.com +M: netdev@vger.kernel.org +L: netdev@vger.kernel.org S: Maintained NETWORKING [IPv4/IPv6] @@ -1614,7 +1614,7 @@ P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy M: kaber@coreworks.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained IPVS @@ -1634,7 +1634,7 @@ NI5010 NETWORK DRIVER P: Jan-Pascal van Best and Andreas Mohr M: Jan-Pascal van Best M: Andreas Mohr <100.30936@germany.net> -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER @@ -1676,7 +1676,7 @@ P: Peter De Shrijver M: p2@ace.ulyssis.student.kuleuven.ac.be P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -1783,7 +1783,7 @@ S: Unmaintained PCNET32 NETWORK DRIVER P: Thomas Bogendörfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained PHRAM MTD DRIVER @@ -1795,7 +1795,7 @@ S: Maintained POSIX CLOCKS and TIMERS P: George Anzinger M: george@mvista.com -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported PNP SUPPORT @@ -1830,7 +1830,7 @@ S: Supported PRISM54 WIRELESS DRIVER P: Prism54 Development Team M: prism54-private@prism54.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org W: http://prism54.org S: Maintained @@ -2047,7 +2047,7 @@ SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano M: venza@brownhat.org W: http://www.brownhat.org/sis900.html -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SIS FRAMEBUFFER DRIVER @@ -2106,7 +2106,7 @@ S: Maintained SONIC NETWORK DRIVER P: Thomas Bogendoerfer M: tsbogend@alpha.franken.de -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Maintained SONY VAIO CONTROL DEVICE DRIVER @@ -2163,7 +2163,7 @@ S: Supported SPX NETWORK LAYER P: Jay Schulist M: jschlst@samba.org -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org S: Supported SRM (Alpha) environment access @@ -2242,7 +2242,7 @@ S: Maintained TOKEN-RING NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net -L: netdev@oss.sgi.com +L: netdev@vger.kernel.org L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b3768d84474..d6d0e43dab6 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -415,7 +415,7 @@ struct rtl8169_private { struct work_struct task; }; -MODULE_AUTHOR("Realtek and the Linux r8169 crew "); +MODULE_AUTHOR("Realtek and the Linux r8169 crew "); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); module_param(rx_copybreak, int, 0); diff --git a/net/sched/act_api.c b/net/sched/act_api.c index cafcb084098..914c85ff8fe 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -881,7 +881,7 @@ static int __init tc_action_init(void) link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action; } - printk("TC classifier action (bugs to netdev@oss.sgi.com cc " + printk("TC classifier action (bugs to netdev@vger.kernel.org cc " "hadi@cyberus.ca)\n"); return 0; } -- cgit v1.2.3-70-g09d2 From f797f9cc5485b50c35c106b462e1bc432ec37f90 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Mon, 13 Jun 2005 15:52:27 -0700 Subject: [PATCH] Fix PCI BAR size interpretation on 64-bit arches On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by: Olof Johansson Acked-by: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index b7ae87823c6..fd48b201eb5 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -125,7 +125,7 @@ static inline unsigned int pci_calc_resource_flags(unsigned int flags) /* * Find the extent of a PCI decode.. */ -static u32 pci_size(u32 base, u32 maxbase, unsigned long mask) +static u32 pci_size(u32 base, u32 maxbase, u32 mask) { u32 size = mask & maxbase; /* Find the significant bits */ if (!size) -- cgit v1.2.3-70-g09d2 From e2c16499515aa044676a14b97a1b8a35f879152a Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Mon, 13 Jun 2005 15:52:36 -0700 Subject: [PATCH] Typo in fbdev sysfs support, virtual_size It prints out x,x instead of x,y. Signed-off-by: Jon Smirl Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbsysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index c78a2c5961d..277d733c6d0 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -241,7 +241,7 @@ static ssize_t show_virtual(struct class_device *class_device, char *buf) struct fb_info *fb_info = (struct fb_info *)class_get_devdata(class_device); return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xres_virtual, - fb_info->var.xres_virtual); + fb_info->var.yres_virtual); } static ssize_t store_cmap(struct class_device *class_device, const char * buf, -- cgit v1.2.3-70-g09d2 From 223230e78900e5f0be984f7697cb9bf172d71a35 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Mon, 13 Jun 2005 22:58:00 -0700 Subject: [PATCH] i2o: Fix free of event memory in i2o_block_event() Fixed freeing of event memory in i2o_block_event() Signed-off-by: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/message/i2o/i2o_block.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 7b74c87b569..4830b775906 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -573,6 +573,7 @@ static int i2o_block_reply(struct i2o_controller *c, u32 m, static void i2o_block_event(struct i2o_event *evt) { osm_info("block-osm: event received\n"); + kfree(evt); }; /* -- cgit v1.2.3-70-g09d2 From 9a47696970bc8233818d370011e2fddae5cfce9f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 13 Jun 2005 22:58:09 -0700 Subject: [PATCH] macmodes: needs a license Module needs a license to prevent kernel tainting. Signed-off-by: Randy Dunlap Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/macmodes.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/video/macmodes.c b/drivers/video/macmodes.c index de5a0f38360..2fc71081f7e 100644 --- a/drivers/video/macmodes.c +++ b/drivers/video/macmodes.c @@ -387,3 +387,4 @@ int __init mac_find_mode(struct fb_var_screeninfo *var, struct fb_info *info, } EXPORT_SYMBOL(mac_find_mode); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 9c56187d3c345cc0e7a2f162b8c32543175d7bf7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Jun 2005 12:56:15 +0200 Subject: This patch kills elevator_global_init() in elevator.c which does nothing. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/block/elevator.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 6b79b431462..98fcabbafe1 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -220,11 +220,6 @@ void elevator_exit(elevator_t *e) kfree(e); } -static int elevator_global_init(void) -{ - return 0; -} - int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; @@ -692,8 +687,6 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } -module_init(elevator_global_init); - EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); -- cgit v1.2.3-70-g09d2 From c374f127e4ff17a318b9ae95a5bf65f370c2d0b1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 16 Jun 2005 12:57:31 +0200 Subject: This patch fixes q->unplug_thresh condition check in __elv_add_request(). rq.count[READ] + rq.count[WRITE] can increase more than one if another thread has allocated a request after the current request is allocated or in_flight could have changed resulting in larger-than-one change of nrq, thus breaking the threshold mechanism. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/block/elevator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98fcabbafe1..89982925f9e 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -317,7 +317,7 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, int nrq = q->rq.count[READ] + q->rq.count[WRITE] - q->in_flight; - if (nrq == q->unplug_thresh) + if (nrq >= q->unplug_thresh) __generic_unplug_device(q); } } else -- cgit v1.2.3-70-g09d2 From a2ef79e1840ebbd0b5907e53c755efd5662112a1 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 15 Jun 2005 22:26:31 -0700 Subject: [PATCH] sbp2 slab corruption fix This fixed a problem that showed up in the Fedora development tree a few weeks before the Fedora Core 4 release, initially as slab corruption, later as hard crashes on boot up, when slab debugging was disabled for the release. More details on the history at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424 The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a scsi_id, without explicitly requesting space for it. Since hostdata is declared as a zero-sized array, we don't get any such space by default, so it must be explicitly requested. The patch below implements just that. Signed-off-by: Alexandre Oliva Cc: Jody McIntyre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/sbp2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 00c7b958361..ab82d6addd7 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -745,7 +745,8 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids); /* Register our host with the SCSI stack. */ - scsi_host = scsi_host_alloc(&scsi_driver_template, 0); + scsi_host = scsi_host_alloc(&scsi_driver_template, + sizeof (unsigned long)); if (!scsi_host) { SBP2_ERR("failed to register scsi host"); goto failed_alloc; -- cgit v1.2.3-70-g09d2 From e41fb09b2fa15db095d3ee981299f488d7b48dfe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 15 Jun 2005 22:26:36 -0700 Subject: [PATCH] ALPS: fix enabling hardware tapping It looks like logic for enabling hardware tapping in ALPS driver was inverted and we enable it only if it was already enabled by BIOS or firmware. I have a confirmation from one user that the patch below fixes the problem for him and it might be beneficial if we could get it into 2.6.12. Signed-off-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/mouse/alps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 42a9f7f6f8c..7bf4be733e9 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -352,7 +352,7 @@ static int alps_reconnect(struct psmouse *psmouse) if (alps_get_status(psmouse, param)) return -1; - if (param[0] & 0x04) + if (!(param[0] & 0x04)) alps_tap_mode(psmouse, 1); if (alps_absolute_mode(psmouse)) { -- cgit v1.2.3-70-g09d2 From 58125f95c62a44f12bb71c58ef70f0068d20c7a2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 15 Jun 2005 22:26:38 -0700 Subject: [PATCH] fix for kaweth broken by changes in the networking layer Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/net/kaweth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index a9a7cf4a38e..fd6ff4cb2c6 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -520,7 +520,7 @@ static void int_callback(struct urb *u, struct pt_regs *regs) /* we check the link state to report changes */ if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) { - if (!act_state) + if (act_state) netif_carrier_on(kaweth->net); else netif_carrier_off(kaweth->net); -- cgit v1.2.3-70-g09d2 From db3b5848ea6440968fcdd29b80514d0de044bb7c Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Fri, 17 Jun 2005 16:15:10 +0200 Subject: When cfq I/O scheduler is selected, get_request() in __make_request() calls __cfq_get_queue(). __cfq_get_queue() finds an existing queue (struct cfq_queue) of the current process for the device and returns it. If it's not found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that get_request() fails) if no __GFP_WAIT flag. On the other hand, in __make_request(), get_request() is called without __GFP_WAIT flag at the first time. Thus, the get_request() fails when there is no existing queue, typically when it's called for the first I/O request of the process to the device. Though it will be followed by get_request_wait() for general case, __make_request() will just end the I/O with an error (EWOULDBLOCK) when the request was for read-ahead. Signed-off-by: Jens Axboe Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura --- drivers/block/cfq-iosched.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index 0ef7a0065ec..2210bacad56 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -1202,13 +1202,16 @@ retry: if (new_cfqq) { cfqq = new_cfqq; new_cfqq = NULL; - } else if (gfp_mask & __GFP_WAIT) { + } else { spin_unlock_irq(cfqd->queue->queue_lock); new_cfqq = kmem_cache_alloc(cfq_pool, gfp_mask); spin_lock_irq(cfqd->queue->queue_lock); + + if (!new_cfqq && !(gfp_mask & __GFP_WAIT)) + goto out; + goto retry; - } else - goto out; + } memset(cfqq, 0, sizeof(*cfqq)); -- cgit v1.2.3-70-g09d2 From 794f5bfa77955c4455f6d72d8b0e2bee25f1ff0c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Jun 2005 12:25:25 -0700 Subject: [PATCH] PCI: don't override drv->shutdown unconditionally There are many drivers that have been setting the generic driver model level shutdown callback, and pci thus must not override it. Without this patch we can have really bad data loss on various raid controllers. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/pci/pci-driver.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index fe98553c978..f315df2005b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -393,7 +393,10 @@ int pci_register_driver(struct pci_driver *drv) drv->driver.bus = &pci_bus_type; drv->driver.probe = pci_device_probe; drv->driver.remove = pci_device_remove; - drv->driver.shutdown = pci_device_shutdown, + /* FIXME, once all of the existing PCI drivers have been fixed to set + * the pci shutdown function, this test can go away. */ + if (!drv->driver.shutdown) + drv->driver.shutdown = pci_device_shutdown, drv->driver.owner = drv->owner; drv->driver.kobj.ktype = &pci_driver_kobj_type; pci_init_dynids(&drv->dynids); -- cgit v1.2.3-70-g09d2